<5>[ 0.000000] Linux version 6.14.0-rc4-xe+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Sun Mar 2 18:54:07 UTC 2025
<6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,snd_hda_intel,ast ro
<6>[ 0.000000] KERNEL supported cpus:
<6>[ 0.000000] Intel GenuineIntel
<6>[ 0.000000] AMD AuthenticAMD
<6>[ 0.000000] Hygon HygonGenuine
<6>[ 0.000000] Centaur CentaurHauls
<6>[ 0.000000] zhaoxin Shanghai
<6>[ 0.000000] x86/tme: not enabled by BIOS
<6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
<6>[ 0.000000] BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001053fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000105400000-0x000000087f7fffff] usable
<6>[ 0.000000] NX (Execute Disable) protection: active
<6>[ 0.000000] APIC: Static calls initialized
<6>[ 0.000000] efi: EFI v2.7 by Intel
<6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x68f86018 ESRT=0x68f97a98 MOKvar=0x6cd0c000
<6>[ 0.000000] efi: Remove mem284: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
<6>[ 0.000000] efi: Remove mem286: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved
<6>[ 0.000000] SMBIOS 3.8 present.
<6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3222.D97.2411281331 11/28/2024
<6>[ 0.000000] DMI: Memory slots populated: 8/8
<6>[ 0.000000] tsc: Detected 3100.000 MHz processor
<6>[ 0.000000] tsc: Detected 3110.400 MHz TSC
<7>[ 0.000009] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[ 0.000010] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[ 0.000014] last_pfn = 0x87f800 max_arch_pfn = 0x400000000
<6>[ 0.000019] MTRR map: 10 entries (3 fixed + 7 variable; max 23), built from 10 variable MTRRs
<6>[ 0.000020] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
<6>[ 0.000380] x2apic: enabled by BIOS, switching to x2apic ops
<6>[ 0.000381] last_pfn = 0x70000 max_arch_pfn = 0x400000000
<6>[ 0.004673] esrt: Reserving ESRT space from 0x0000000068f97a98 to 0x0000000068f97be8.
<7>[ 0.004681] e820: update [mem 0x68f97000-0x68f97fff] usable ==> reserved
<6>[ 0.004701] Using GB pages for direct mapping
<6>[ 0.005324] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes
<6>[ 0.005325] printk: early log buf free: 258912(98%)
<6>[ 0.005325] Secure boot disabled
<6>[ 0.005327] ACPI: Early table checksum verification disabled
<6>[ 0.005331] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL )
<6>[ 0.005334] ACPI: XSDT 0x000000006FF7C228 00019C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005338] ACPI: FACP 0x000000006FFAB000 000114 (v06 INTEL LNL 00000002 01000013)
<6>[ 0.005342] ACPI: DSDT 0x000000006FFB7000 025212 (v02 INTEL LNL 00000002 01000013)
<6>[ 0.005343] ACPI: FACS 0x000000006FEF1000 000040
<6>[ 0.005345] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930)
<6>[ 0.005346] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930)
<6>[ 0.005348] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930)
<6>[ 0.005349] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930)
<6>[ 0.005350] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930)
<6>[ 0.005351] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930)
<6>[ 0.005353] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930)
<6>[ 0.005354] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930)
<6>[ 0.005355] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930)
<6>[ 0.005357] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930)
<6>[ 0.005358] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000)
<6>[ 0.005359] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930)
<6>[ 0.005361] ACPI: SSDT 0x000000006FFE8000 002460 (v02 INTEL IgfxSsdt 00003000 INTL 20210930)
<6>[ 0.005362] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930)
<6>[ 0.005363] ACPI: SSDT 0x000000006FFDE000 008F36 (v02 INTEL TcssSsdt 00001000 INTL 20210930)
<6>[ 0.005364] ACPI: SSDT 0x000000006FFDD000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930)
<6>[ 0.005366] ACPI: SSDT 0x000000006FFB2000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930)
<6>[ 0.005367] ACPI: SSDT 0x000000006FFB0000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930)
<6>[ 0.005368] ACPI: SSDT 0x000000006FFAC000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930)
<6>[ 0.005369] ACPI: HPET 0x000000006FFAA000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005371] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005372] ACPI: APIC 0x000000006FFA8000 0000D8 (v06 INTEL LNL 00000000 01000013)
<6>[ 0.005373] ACPI: MCFG 0x000000006FFA7000 00003C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005375] ACPI: SSDT 0x000000006FFA6000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930)
<6>[ 0.005376] ACPI: SSDT 0x000000006FFA0000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930)
<6>[ 0.005377] ACPI: SSDT 0x000000006FF95000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930)
<6>[ 0.005378] ACPI: LPIT 0x000000006FF94000 0000CC (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005380] ACPI: SSDT 0x000000006FF93000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930)
<6>[ 0.005381] ACPI: SSDT 0x000000006FF92000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930)
<6>[ 0.005382] ACPI: DBGP 0x000000006FF91000 000034 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005383] ACPI: DBG2 0x000000006FF90000 000054 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.005385] ACPI: NHLT 0x000000006FF8F000 0002E3 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.005386] ACPI: SSDT 0x000000006FF8D000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930)
<6>[ 0.005387] ACPI: SSDT 0x000000006FF86000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930)
<6>[ 0.005389] ACPI: ECDT 0x000000006FF85000 000069 (v01 LNL 00000002 01000013)
<6>[ 0.005390] ACPI: DMAR 0x000000006FF84000 0000D8 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005391] ACPI: FPDT 0x000000006FF83000 000044 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005392] ACPI: SSDT 0x000000006FF82000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930)
<6>[ 0.005394] ACPI: SSDT 0x000000006FF80000 001122 (v02 SocGpe SocGpe 00003000 INTL 20210930)
<6>[ 0.005395] ACPI: SSDT 0x000000006FF7D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930)
<6>[ 0.005396] ACPI: SDEV 0x000000006FFA9000 000046 (v01 00000000 00000000)
<6>[ 0.005398] ACPI: SSDT 0x000000006FF71000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930)
<6>[ 0.005399] ACPI: SSDT 0x000000006FF63000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930)
<6>[ 0.005400] ACPI: ASF! 0x000000006FF62000 000074 (v32 INTEL LNL 00000002 01000013)
<6>[ 0.005402] ACPI: PHAT 0x000000006FF61000 0006E0 (v01 INTEL LNL 00000005 MSFT 0100000D)
<6>[ 0.005403] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005404] ACPI: Reserving FACP table memory at [mem 0x6ffab000-0x6ffab113]
<6>[ 0.005405] ACPI: Reserving DSDT table memory at [mem 0x6ffb7000-0x6ffdc211]
<6>[ 0.005405] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f]
<6>[ 0.005406] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387]
<6>[ 0.005406] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9]
<6>[ 0.005406] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa]
<6>[ 0.005407] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa]
<6>[ 0.005407] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393]
<6>[ 0.005407] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae]
<6>[ 0.005407] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f]
<6>[ 0.005408] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348]
<6>[ 0.005408] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba]
<6>[ 0.005408] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6]
<6>[ 0.005408] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f]
<6>[ 0.005409] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1]
<6>[ 0.005409] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea45f]
<6>[ 0.005409] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4]
<6>[ 0.005410] ACPI: Reserving SSDT table memory at [mem 0x6ffde000-0x6ffe6f35]
<6>[ 0.005410] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffdd0df]
<6>[ 0.005410] ACPI: Reserving SSDT table memory at [mem 0x6ffb2000-0x6ffb6ac2]
<6>[ 0.005410] ACPI: Reserving SSDT table memory at [mem 0x6ffb0000-0x6ffb140e]
<6>[ 0.005411] ACPI: Reserving SSDT table memory at [mem 0x6ffac000-0x6ffaf955]
<6>[ 0.005411] ACPI: Reserving HPET table memory at [mem 0x6ffaa000-0x6ffaa037]
<6>[ 0.005411] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027]
<6>[ 0.005412] ACPI: Reserving APIC table memory at [mem 0x6ffa8000-0x6ffa80d7]
<6>[ 0.005412] ACPI: Reserving MCFG table memory at [mem 0x6ffa7000-0x6ffa703b]
<6>[ 0.005412] ACPI: Reserving SSDT table memory at [mem 0x6ffa6000-0x6ffa66e2]
<6>[ 0.005413] ACPI: Reserving SSDT table memory at [mem 0x6ffa0000-0x6ffa5320]
<6>[ 0.005413] ACPI: Reserving SSDT table memory at [mem 0x6ff95000-0x6ff9f469]
<6>[ 0.005413] ACPI: Reserving LPIT table memory at [mem 0x6ff94000-0x6ff940cb]
<6>[ 0.005413] ACPI: Reserving SSDT table memory at [mem 0x6ff93000-0x6ff93d5b]
<6>[ 0.005414] ACPI: Reserving SSDT table memory at [mem 0x6ff92000-0x6ff921ef]
<6>[ 0.005414] ACPI: Reserving DBGP table memory at [mem 0x6ff91000-0x6ff91033]
<6>[ 0.005414] ACPI: Reserving DBG2 table memory at [mem 0x6ff90000-0x6ff90053]
<6>[ 0.005415] ACPI: Reserving NHLT table memory at [mem 0x6ff8f000-0x6ff8f2e2]
<6>[ 0.005415] ACPI: Reserving SSDT table memory at [mem 0x6ff8d000-0x6ff8e15b]
<6>[ 0.005415] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff8c53a]
<6>[ 0.005415] ACPI: Reserving ECDT table memory at [mem 0x6ff85000-0x6ff85068]
<6>[ 0.005416] ACPI: Reserving DMAR table memory at [mem 0x6ff84000-0x6ff840d7]
<6>[ 0.005416] ACPI: Reserving FPDT table memory at [mem 0x6ff83000-0x6ff83043]
<6>[ 0.005416] ACPI: Reserving SSDT table memory at [mem 0x6ff82000-0x6ff8286c]
<6>[ 0.005417] ACPI: Reserving SSDT table memory at [mem 0x6ff80000-0x6ff81121]
<6>[ 0.005417] ACPI: Reserving SSDT table memory at [mem 0x6ff7d000-0x6ff7f462]
<6>[ 0.005417] ACPI: Reserving SDEV table memory at [mem 0x6ffa9000-0x6ffa9045]
<6>[ 0.005417] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff7b4f9]
<6>[ 0.005418] ACPI: Reserving SSDT table memory at [mem 0x6ff63000-0x6ff70815]
<6>[ 0.005418] ACPI: Reserving ASF! table memory at [mem 0x6ff62000-0x6ff62073]
<6>[ 0.005418] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff616df]
<6>[ 0.005419] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037]
<6>[ 0.005483] APIC: Switched APIC routing to: cluster x2apic
<6>[ 0.005685] No NUMA configuration found
<6>[ 0.005685] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff]
<6>[ 0.005690] NODE_DATA(0) allocated [mem 0x87f352fc0-0x87f37dfff]
<6>[ 0.005800] Zone ranges:
<6>[ 0.005801] DMA [mem 0x0000000000001000-0x0000000000ffffff]
<6>[ 0.005802] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
<6>[ 0.005802] Normal [mem 0x0000000100000000-0x000000087f7fffff]
<6>[ 0.005803] Device empty
<6>[ 0.005804] Movable zone start for each node
<6>[ 0.005804] Early memory node ranges
<6>[ 0.005805] node 0: [mem 0x0000000000001000-0x000000000009efff]
<6>[ 0.005805] node 0: [mem 0x0000000000100000-0x000000006cac0fff]
<6>[ 0.005806] node 0: [mem 0x000000006ffff000-0x000000006fffffff]
<6>[ 0.005806] node 0: [mem 0x0000000105400000-0x000000087f7fffff]
<6>[ 0.005808] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff]
<6>[ 0.005812] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[ 0.005829] On node 0, zone DMA: 97 pages in unavailable ranges
<6>[ 0.007859] On node 0, zone DMA32: 13630 pages in unavailable ranges
<6>[ 0.036397] On node 0, zone Normal: 21504 pages in unavailable ranges
<6>[ 0.036462] On node 0, zone Normal: 2048 pages in unavailable ranges
<6>[ 0.036938] ACPI: PM-Timer IO Port: 0x1808
<6>[ 0.036944] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
<6>[ 0.036995] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
<6>[ 0.036997] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[ 0.036998] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>[ 0.037000] ACPI: Using ACPI (MADT) for SMP configuration information
<6>[ 0.037001] ACPI: HPET id: 0x8086a701 base: 0xfed00000
<7>[ 0.037012] e820: update [mem 0x68f42000-0x68f5cfff] usable ==> reserved
<6>[ 0.037018] TSC deadline timer available
<6>[ 0.037020] CPU topo: Max. logical packages: 1
<6>[ 0.037020] CPU topo: Max. logical dies: 1
<6>[ 0.037020] CPU topo: Max. dies per package: 1
<6>[ 0.037022] CPU topo: Max. threads per core: 1
<6>[ 0.037022] CPU topo: Num. cores per package: 8
<6>[ 0.037022] CPU topo: Num. threads per package: 8
<6>[ 0.037023] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
<6>[ 0.037035] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[ 0.037036] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
<6>[ 0.037037] PM: hibernation: Registered nosave memory: [mem 0x68f42000-0x68f5cfff]
<6>[ 0.037038] PM: hibernation: Registered nosave memory: [mem 0x68f97000-0x68f97fff]
<6>[ 0.037038] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fe67fff]
<6>[ 0.037039] PM: hibernation: Registered nosave memory: [mem 0x6fe68000-0x6ff4ffff]
<6>[ 0.037039] PM: hibernation: Registered nosave memory: [mem 0x6ff50000-0x6fffefff]
<6>[ 0.037040] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff]
<6>[ 0.037040] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff]
<6>[ 0.037040] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
<6>[ 0.037041] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
<6>[ 0.037041] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x1053fffff]
<6>[ 0.037043] [mem 0x80800000-0xfed1ffff] available for PCI devices
<6>[ 0.037044] Booting paravirtualized kernel on bare hardware
<6>[ 0.037046] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
<6>[ 0.037054] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
<6>[ 0.037399] percpu: Embedded 91 pages/cpu s249856 r8192 d114688 u524288
<7>[ 0.037403] pcpu-alloc: s249856 r8192 d114688 u524288 alloc=1*2097152
<7>[ 0.037405] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7
<5>[ 0.037417] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,snd_hda_intel,ast ro
<5>[ 0.037496] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space.
<5>[ 0.037509] random: crng init done
<6>[ 0.039365] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
<6>[ 0.040291] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
<6>[ 0.040346] Fallback order for Node 0: 0
<6>[ 0.040349] Built 1 zonelists, mobility grouping on. Total pages: 8285792
<6>[ 0.040349] Policy zone: Normal
<6>[ 0.040358] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
<6>[ 0.040359] stackdepot: allocating hash table via alloc_large_system_hash
<6>[ 0.040361] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear)
<6>[ 0.041287] software IO TLB: area num 8.
<4>[ 0.086616] **********************************************************
<4>[ 0.086618] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.086618] ** **
<4>[ 0.086618] ** This system shows unhashed kernel memory addresses **
<4>[ 0.086618] ** via the console, logs, and other interfaces. This **
<4>[ 0.086618] ** might reduce the security of your system. **
<4>[ 0.086619] ** **
<4>[ 0.086619] ** If you see this message and you are not debugging **
<4>[ 0.086619] ** the kernel, report this immediately to your system **
<4>[ 0.086619] ** administrator! **
<4>[ 0.086619] ** **
<4>[ 0.086620] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.086620] **********************************************************
<6>[ 0.087708] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
<6>[ 0.088033] ftrace: allocating 59524 entries in 233 pages
<6>[ 0.113465] ftrace: allocated 233 pages with 5 groups
<6>[ 0.114670] Dynamic Preempt: voluntary
<6>[ 0.115118] Running RCU self tests
<6>[ 0.115119] Running RCU synchronous self tests
<6>[ 0.115119] rcu: Preemptible hierarchical RCU implementation.
<6>[ 0.115120] rcu: RCU lockdep checking is enabled.
<6>[ 0.115120] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
<6>[ 0.115121] Trampoline variant of Tasks RCU enabled.
<6>[ 0.115121] Rude variant of Tasks RCU enabled.
<6>[ 0.115121] Tracing variant of Tasks RCU enabled.
<6>[ 0.115122] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
<6>[ 0.115122] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
<6>[ 0.115161] Running RCU synchronous self tests
<6>[ 0.115164] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.115167] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.115170] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.125310] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
<6>[ 0.125766] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[ 0.126110] Console: colour dummy device 80x25
<6>[ 0.126119] printk: legacy console [tty0] enabled
<6>[ 0.127295] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<6>[ 0.127303] ... MAX_LOCKDEP_SUBCLASSES: 8
<6>[ 0.127307] ... MAX_LOCK_DEPTH: 48
<6>[ 0.127310] ... MAX_LOCKDEP_KEYS: 8192
<6>[ 0.127314] ... CLASSHASH_SIZE: 4096
<6>[ 0.127317] ... MAX_LOCKDEP_ENTRIES: 524288
<6>[ 0.127321] ... MAX_LOCKDEP_CHAINS: 524288
<6>[ 0.127324] ... CHAINHASH_SIZE: 262144
<6>[ 0.127328] memory used by lock dependency info: 54145 kB
<6>[ 0.127332] memory used for stack traces: 4224 kB
<6>[ 0.127336] per task-struct memory footprint: 1920 bytes
<6>[ 0.127385] ACPI: Core revision 20240827
<6>[ 0.128254] hpet: HPET dysfunctional in PC10. Force disabled.
<6>[ 0.128318] APIC: Switch to symmetric I/O mode setup
<6>[ 0.128324] DMAR: Host address width 38
<6>[ 0.128328] DMAR: DRHD base: 0x000000fc800000 flags: 0x0
<6>[ 0.128361] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 0.128393] DMAR: DRHD base: 0x000000fc810000 flags: 0x0
<6>[ 0.128415] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 0.128440] DMAR: DRHD base: 0x000000fc820000 flags: 0x1
<6>[ 0.128463] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda
<6>[ 0.128499] DMAR: SATC flags: 0x1
<6>[ 0.128511] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2
<6>[ 0.128517] DMAR-IR: HPET id 0 under DRHD base 0xfc820000
<6>[ 0.128521] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>[ 0.130588] DMAR-IR: Enabled IRQ remapping in x2apic mode
<6>[ 0.135762] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 0.135780] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400)
<6>[ 0.135854] CPU0: Thermal monitoring enabled (TM1)
<6>[ 0.135860] x86/cpu: User Mode Instruction Prevention (UMIP) activated
<6>[ 0.136039] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
<6>[ 0.136044] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
<6>[ 0.136054] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
<6>[ 0.136063] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
<6>[ 0.136068] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
<6>[ 0.136076] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
<6>[ 0.136083] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
<6>[ 0.136099] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
<6>[ 0.136105] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
<6>[ 0.136110] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
<6>[ 0.136115] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
<6>[ 0.136121] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
<6>[ 0.136127] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
<6>[ 0.136132] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
<6>[ 0.136138] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
<6>[ 0.136143] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
<6>[ 0.136775] Freeing SMP alternatives memory: 48K
<6>[ 0.136775] pid_max: default: 32768 minimum: 301
<6>[ 0.136775] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm
<6>[ 0.136775] landlock: Up and running.
<6>[ 0.136775] Yama: becoming mindful.
<6>[ 0.136775] AppArmor: AppArmor initialized
<6>[ 0.136775] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.136775] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.136775] Running RCU synchronous self tests
<6>[ 0.136775] Running RCU synchronous self tests
<6>[ 0.136775] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1)
<6>[ 0.136775] Running RCU Tasks wait API self tests
<6>[ 0.136775] Running RCU Tasks Rude wait API self tests
<6>[ 0.136775] Running RCU Tasks Trace wait API self tests
<6>[ 0.136775] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
<6>[ 0.136775] core: cpu_core PMU driver:
<6>[ 0.136775] ... version: 6
<6>[ 0.136775] ... bit width: 48
<6>[ 0.136775] ... generic registers: 10
<6>[ 0.136775] ... value mask: 0000ffffffffffff
<6>[ 0.136779] ... max period: 00007fffffffffff
<6>[ 0.136783] ... fixed-purpose events: 4
<6>[ 0.136787] ... event mask: 0001000f000003ff
<6>[ 0.136817] signal: max sigframe size: 3632
<6>[ 0.136839] Estimated ratio of average max frequency by base frequency (times 1024): 1189
<6>[ 0.136924] rcu: Hierarchical SRCU implementation.
<6>[ 0.136929] rcu: Max phase no-delay instances is 400.
<6>[ 0.137844] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
<6>[ 0.139656] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
<6>[ 0.139924] smp: Bringing up secondary CPUs ...
<6>[ 0.140272] smpboot: x86: Booting SMP configuration:
<6>[ 0.140278] .... node #0, CPUs: #1 #2
<6>[ 0.142380] Callback from call_rcu_tasks_trace() invoked.
<4>[ 0.144861] #3 #4 #5 #6 #7
<6>[ 0.010826] core: cpu_atom PMU driver:
<6>[ 0.010826] ... version: 6
<6>[ 0.010826] ... bit width: 48
<6>[ 0.010826] ... generic registers: 8
<6>[ 0.010826] ... value mask: 0000ffffffffffff
<6>[ 0.010826] ... max period: 00007fffffffffff
<6>[ 0.010826] ... fixed-purpose events: 6
<6>[ 0.010826] ... event mask: 00000077000000ff
<6>[ 0.153875] smp: Brought up 1 node, 8 CPUs
<6>[ 0.153875] smpboot: Total of 8 processors activated (49766.40 BogoMIPS)
<6>[ 0.155892] Memory: 32344596K/33143168K available (24514K kernel code, 5579K rwdata, 9272K rodata, 5632K init, 68400K bss, 775240K reserved, 0K cma-reserved)
<6>[ 0.156926] devtmpfs: initialized
<6>[ 0.157039] x86/mm: Memory block size: 128MB
<6>[ 0.172872] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes)
<6>[ 0.173275] Running RCU synchronous self tests
<6>[ 0.173288] Running RCU synchronous self tests
<6>[ 0.173305] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[ 0.173305] futex hash table entries: 2048 (order: 6, 262144 bytes, linear)
<6>[ 0.174079] pinctrl core: initialized pinctrl subsystem
<6>[ 0.174576] PM: RTC time: 08:18:09, date: 2025-03-03
<6>[ 0.175440] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[ 0.176370] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
<6>[ 0.176679] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[ 0.176953] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[ 0.177005] audit: initializing netlink subsys (disabled)
<5>[ 0.177063] audit: type=2000 audit(1740989889.041:1): state=initialized audit_enabled=0 res=1
<6>[ 0.178076] thermal_sys: Registered thermal governor 'fair_share'
<6>[ 0.178078] thermal_sys: Registered thermal governor 'bang_bang'
<6>[ 0.178085] thermal_sys: Registered thermal governor 'step_wise'
<6>[ 0.178089] thermal_sys: Registered thermal governor 'user_space'
<6>[ 0.178094] thermal_sys: Registered thermal governor 'power_allocator'
<6>[ 0.178137] EISA bus registered
<6>[ 0.178164] cpuidle: using governor ladder
<6>[ 0.178164] cpuidle: using governor menu
<6>[ 0.178164] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[ 0.179041] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
<6>[ 0.179068] PCI: Using configuration type 1 for base access
<6>[ 0.179210] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
<6>[ 0.180821] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
<6>[ 0.180826] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
<6>[ 0.180831] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
<6>[ 0.180836] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
<6>[ 0.199776] raid6: avx2x4 gen() 75036 MB/s
<6>[ 0.216776] raid6: avx2x2 gen() 82683 MB/s
<6>[ 0.233776] raid6: avx2x1 gen() 77308 MB/s
<6>[ 0.233780] raid6: using algorithm avx2x2 gen() 82683 MB/s
<6>[ 0.250776] raid6: .... xor() 56787 MB/s, rmw enabled
<6>[ 0.250781] raid6: using avx2x2 recovery algorithm
<6>[ 0.252408] fbcon: Taking over console
<6>[ 0.252797] ACPI: Added _OSI(Module Device)
<6>[ 0.252797] ACPI: Added _OSI(Processor Device)
<6>[ 0.252797] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[ 0.252797] ACPI: Added _OSI(Processor Aggregator Device)
<6>[ 0.791690] ACPI: 31 ACPI AML tables successfully acquired and loaded
<6>[ 0.811559] ACPI: EC: EC started
<6>[ 0.811571] ACPI: EC: interrupt blocked
<6>[ 0.814462] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 0.814468] ACPI: EC: Boot ECDT EC used to handle transactions
<6>[ 0.890845] Callback from call_rcu_tasks() invoked.
<6>[ 1.130275] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.130284] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.167288] ACPI: Interpreter enabled
<6>[ 1.167527] ACPI: PM: (supports S0 S4 S5)
<6>[ 1.167539] ACPI: Using IOAPIC for interrupt routing
<6>[ 1.181775] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[ 1.181775] PCI: Ignoring E820 reservations for host bridge windows
<6>[ 1.238070] ACPI: Enabled 10 GPEs in block 00 to 7F
<6>[ 1.238150] ACPI: Enabled 13 GPEs in block 80 to DF
<6>[ 1.318797] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource
<6>[ 1.319104] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource
<6>[ 1.321882] ACPI: \_SB_.PC00.PAUD: New power resource
<6>[ 1.804441] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
<6>[ 1.820307] ACPI: \_SB_.PC00.RP02.PXP_: New power resource
<6>[ 1.957752] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource
<6>[ 1.959544] ACPI: \_SB_.PC00.RP04.PXP_: New power resource
<6>[ 1.986127] ACPI: \_SB_.PC00.RP05.PXP_: New power resource
<6>[ 2.011920] ACPI: \_SB_.PC00.TBT0: New power resource
<6>[ 2.012680] ACPI: \_SB_.PC00.TBT1: New power resource
<6>[ 2.012775] ACPI: \_SB_.PC00.D3C_: New power resource
<3>[ 2.090823] ACPI: \: Can't tag data node
<3>[ 2.092525] ACPI: \: Can't tag data node
<3>[ 2.094413] ACPI: \: Can't tag data node
<3>[ 2.096727] ACPI: \: Can't tag data node
<3>[ 2.098577] ACPI: \: Can't tag data node
<6>[ 2.275227] ACPI: \_TZ_.FN00: New power resource
<6>[ 2.276098] ACPI: \_TZ_.FN01: New power resource
<6>[ 2.276898] ACPI: \_TZ_.FN02: New power resource
<6>[ 2.277686] ACPI: \_TZ_.FN03: New power resource
<6>[ 2.278913] ACPI: \_TZ_.FN04: New power resource
<6>[ 2.281051] ACPI: \PIN_: New power resource
<6>[ 2.287001] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
<6>[ 2.287031] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
<6>[ 2.292811] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC]
<6>[ 2.306779] PCI host bridge to bus 0000:00
<6>[ 2.306779] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
<6>[ 2.306779] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
<6>[ 2.306779] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[ 2.306779] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window]
<6>[ 2.306779] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window]
<6>[ 2.306779] pci_bus 0000:00: root bus resource [bus 00-fe]
<6>[ 2.316349] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint
<6>[ 2.317079] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
<6>[ 2.317172] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref]
<6>[ 2.317181] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref]
<6>[ 2.317191] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref]
<6>[ 2.317237] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6>[ 2.318481] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint
<6>[ 2.318511] pci 0000:00:04.0: BAR 0 [mem 0x3815c00000-0x3815c1ffff 64bit]
<6>[ 2.319741] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint
<6>[ 2.319771] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit]
<6>[ 2.319779] pci 0000:00:05.0: BAR 4 [mem 0x3815c7b000-0x3815c7bfff 64bit]
<6>[ 2.320616] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port
<6>[ 2.320658] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 2.320670] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 2.320689] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 2.320820] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<6>[ 2.320876] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
<6>[ 2.325476] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port
<6>[ 2.325526] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 2.325538] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 2.325556] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 2.325680] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
<6>[ 2.325736] pci 0000:00:07.1: PTM enabled (root), 4ns granularity
<6>[ 2.330091] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port
<6>[ 2.330135] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 2.330146] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 2.330165] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 2.330295] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold
<6>[ 2.330344] pci 0000:00:07.2: PTM enabled (root), 4ns granularity
<6>[ 2.334473] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
<6>[ 2.334510] pci 0000:00:0a.0: BAR 0 [mem 0x3815c50000-0x3815c5ffff 64bit]
<6>[ 2.334524] pci 0000:00:0a.0: enabling Extended Tags
<6>[ 2.334725] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint
<6>[ 2.334754] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit]
<6>[ 2.334761] pci 0000:00:0b.0: BAR 4 [mem 0x3815c7a000-0x3815c7afff 64bit]
<6>[ 2.335480] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 2.335533] pci 0000:00:0d.0: BAR 0 [mem 0x3815c40000-0x3815c4ffff 64bit]
<6>[ 2.335604] pci 0000:00:0d.0: PME# supported from D3hot D3cold
<6>[ 2.337118] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 2.337170] pci 0000:00:0d.2: BAR 0 [mem 0x3815bc0000-0x3815bfffff 64bit]
<6>[ 2.337178] pci 0000:00:0d.2: BAR 2 [mem 0x3815c79000-0x3815c79fff 64bit]
<6>[ 2.337236] pci 0000:00:0d.2: supports D1 D2
<6>[ 2.337240] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.338450] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 2.338502] pci 0000:00:0d.3: BAR 0 [mem 0x3815b80000-0x3815bbffff 64bit]
<6>[ 2.338510] pci 0000:00:0d.3: BAR 2 [mem 0x3815c78000-0x3815c78fff 64bit]
<6>[ 2.338569] pci 0000:00:0d.3: supports D1 D2
<6>[ 2.338573] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.340027] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint
<6>[ 2.340085] pci 0000:00:12.0: BAR 0 [mem 0x3815c30000-0x3815c3ffff 64bit]
<6>[ 2.340153] pci 0000:00:12.0: PME# supported from D0 D3hot
<6>[ 2.342537] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint
<6>[ 2.342632] pci 0000:00:13.0: BAR 0 [mem 0x3815c77000-0x3815c77fff 64bit]
<6>[ 2.342735] pci 0000:00:13.0: PME# supported from D3hot
<6>[ 2.343156] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 2.343209] pci 0000:00:14.0: BAR 0 [mem 0x3815c20000-0x3815c2ffff 64bit]
<6>[ 2.343276] pci 0000:00:14.0: PME# supported from D3hot D3cold
<6>[ 2.345407] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint
<6>[ 2.345471] pci 0000:00:14.2: BAR 0 [mem 0x3815c68000-0x3815c6ffff 64bit]
<6>[ 2.345480] pci 0000:00:14.2: BAR 2 [mem 0x3815c76000-0x3815c76fff 64bit]
<6>[ 2.345772] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.345871] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.347541] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.347651] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.349027] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.349138] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.350495] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.350589] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.352222] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint
<6>[ 2.352320] pci 0000:00:16.0: BAR 0 [mem 0x3815c71000-0x3815c71fff 64bit]
<6>[ 2.352422] pci 0000:00:16.0: PME# supported from D3hot
<6>[ 2.354770] pci 0000:00:16.3: [8086:a873] type 00 class 0x070002 conventional PCI endpoint
<6>[ 2.354869] pci 0000:00:16.3: BAR 0 [io 0x4020-0x4027]
<6>[ 2.354876] pci 0000:00:16.3: BAR 1 [mem 0x94421000-0x94421fff]
<6>[ 2.355267] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port
<6>[ 2.355301] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 2.355309] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 2.355316] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 2.355439] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>[ 2.355495] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
<6>[ 2.360160] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port
<6>[ 2.360266] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 2.360297] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 2.360636] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
<6>[ 2.360798] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
<6>[ 2.365818] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint
<6>[ 2.367703] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint
<6>[ 2.367815] pci 0000:00:1f.3: BAR 0 [mem 0x3815b00000-0x3815b7ffff 64bit]
<6>[ 2.367830] pci 0000:00:1f.3: BAR 4 [mem 0x3815800000-0x38159fffff 64bit]
<6>[ 2.367940] pci 0000:00:1f.3: PME# supported from D3hot D3cold
<6>[ 2.368387] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint
<6>[ 2.368452] pci 0000:00:1f.4: BAR 0 [mem 0x3815c70000-0x3815c700ff 64bit]
<6>[ 2.368464] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf]
<6>[ 2.369607] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.369794] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
<6>[ 2.370015] pci 0000:00:1f.6: [8086:550e] type 00 class 0x020000 conventional PCI endpoint
<6>[ 2.370077] pci 0000:00:1f.6: BAR 0 [mem 0x94400000-0x9441ffff]
<6>[ 2.370144] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
<6>[ 2.371420] pci 0000:00:1f.7: [8086:a824] type 00 class 0x130000 conventional PCI endpoint
<6>[ 2.371476] pci 0000:00:1f.7: BAR 0 [mem 0x3815a00000-0x3815afffff 64bit]
<6>[ 2.371484] pci 0000:00:1f.7: BAR 2 [mem 0x3815000000-0x38157fffff 64bit]
<6>[ 2.371492] pci 0000:00:1f.7: BAR 4 [mem 0x3815c60000-0x3815c67fff 64bit]
<6>[ 2.371821] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 2.371983] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 2.372138] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 2.372321] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint
<6>[ 2.372393] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff]
<6>[ 2.372403] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit]
<6>[ 2.372412] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit]
<6>[ 2.372575] pci 0000:7f:00.0: supports D1 D2
<6>[ 2.372579] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.373127] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 2.376147] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 2.376562] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint
<6>[ 2.376620] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit]
<6>[ 2.377160] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 2.377219] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 2.792859] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1)
<6>[ 16.407399] Low-power S0 idle used by default for system suspend
<6>[ 16.459755] ACPI: EC: interrupt unblocked
<6>[ 16.459765] ACPI: EC: event unblocked
<6>[ 16.459776] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 16.459782] ACPI: EC: GPE=0x6e
<6>[ 16.459788] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete
<6>[ 16.459797] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
<6>[ 16.460983] iommu: Default domain type: Translated
<6>[ 16.461058] iommu: DMA domain TLB invalidation policy: lazy mode
<5>[ 16.466091] SCSI subsystem initialized
<7>[ 16.466184] libata version 3.00 loaded.
<6>[ 16.466956] ACPI: bus type USB registered
<6>[ 16.467143] usbcore: registered new interface driver usbfs
<6>[ 16.467235] usbcore: registered new interface driver hub
<6>[ 16.467343] usbcore: registered new device driver usb
<6>[ 16.467660] pps_core: LinuxPPS API ver. 1 registered
<6>[ 16.467673] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[ 16.467726] PTP clock support registered
<6>[ 16.468023] EDAC MC: Ver: 3.0.0
<6>[ 16.470971] efivars: Registered efivars operations
<6>[ 16.474446] NetLabel: Initializing
<6>[ 16.474458] NetLabel: domain hash size = 128
<6>[ 16.474471] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
<6>[ 16.474682] NetLabel: unlabeled traffic allowed by default
<6>[ 16.474728] mctp: management component transport protocol core
<6>[ 16.474741] NET: Registered PF_MCTP protocol family
<6>[ 16.474837] PCI: Using ACPI for IRQ routing
<7>[ 16.535093] PCI: pci_cache_line_size set to 64 bytes
<6>[ 16.535511] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
<7>[ 16.535820] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
<7>[ 16.535846] e820: reserve RAM buffer [mem 0x68f42000-0x6bffffff]
<7>[ 16.535855] e820: reserve RAM buffer [mem 0x68f97000-0x6bffffff]
<7>[ 16.535861] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff]
<7>[ 16.535868] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff]
<6>[ 16.537845] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6>[ 16.537872] pci 0000:00:02.0: vgaarb: bridge control possible
<6>[ 16.537885] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
<6>[ 16.537923] vgaarb: loaded
<6>[ 16.538787] clocksource: Switched to clocksource tsc-early
<5>[ 16.553070] VFS: Disk quotas dquot_6.6.0
<6>[ 16.553131] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[ 16.555291] AppArmor: AppArmor Filesystem Enabled
<6>[ 16.555665] pnp: PnP ACPI init
<6>[ 16.557759] system 00:00: [io 0x0680-0x069f] has been reserved
<6>[ 16.557786] system 00:00: [io 0x164e-0x164f] has been reserved
<6>[ 16.561258] system 00:02: [io 0x06a4] has been reserved
<6>[ 16.561281] system 00:02: [io 0x06a0] has been reserved
<6>[ 16.622250] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
<6>[ 16.622281] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved
<6>[ 16.622300] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved
<6>[ 16.622314] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved
<6>[ 16.622328] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved
<6>[ 16.622344] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved
<6>[ 16.622359] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
<6>[ 16.622373] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
<6>[ 16.628424] system 00:04: [io 0x2000-0x20fe] has been reserved
<6>[ 16.634091] system 00:06: [io 0x1854-0x1857] has been reserved
<6>[ 16.634336] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved
<6>[ 16.642079] pnp: PnP ACPI: found 8 devices
<6>[ 16.655944] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<6>[ 16.657116] NET: Registered PF_INET protocol family
<6>[ 16.657361] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 16.660578] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear)
<6>[ 16.660914] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[ 16.661245] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 16.662486] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage)
<6>[ 16.664584] TCP: Hash tables configured (established 262144 bind 65536)
<6>[ 16.665339] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 16.667276] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 16.668919] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[ 16.669030] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000
<6>[ 16.669049] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000
<6>[ 16.669063] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000
<6>[ 16.669143] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]: assigned
<6>[ 16.669153] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff]: assigned
<6>[ 16.669163] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff]: assigned
<6>[ 16.669173] pci 0000:00:15.0: BAR 0 [mem 0x3815c72000-0x3815c72fff 64bit]: assigned
<6>[ 16.669228] pci 0000:00:15.1: BAR 0 [mem 0x3815c73000-0x3815c73fff 64bit]: assigned
<6>[ 16.669282] pci 0000:00:15.2: BAR 0 [mem 0x3815c74000-0x3815c74fff 64bit]: assigned
<6>[ 16.669338] pci 0000:00:15.3: BAR 0 [mem 0x3815c75000-0x3815c75fff 64bit]: assigned
<6>[ 16.669392] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned
<6>[ 16.669439] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 16.669452] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]
<6>[ 16.669464] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 16.669476] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 16.669491] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 16.669501] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff]
<6>[ 16.669513] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 16.669524] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 16.669539] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 16.669548] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff]
<6>[ 16.669559] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 16.669570] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 16.669587] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 16.669595] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 16.669606] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 16.669620] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 16.669657] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 16.669704] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
<6>[ 16.669713] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
<6>[ 16.669721] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[ 16.669730] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window]
<6>[ 16.669738] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window]
<6>[ 16.669748] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
<6>[ 16.669755] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff]
<6>[ 16.669763] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 16.669774] pci_bus 0000:2b: resource 0 [io 0x6000-0x6fff]
<6>[ 16.669781] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff]
<6>[ 16.669789] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 16.669799] pci_bus 0000:55: resource 0 [io 0x7000-0x7fff]
<6>[ 16.669806] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff]
<6>[ 16.669814] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 16.669824] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff]
<6>[ 16.669836] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff]
<6>[ 16.669845] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff]
<6>[ 16.671373] pci 0000:00:0d.0: enabling device (0000 -> 0002)
<6>[ 16.673629] PCI: CLS 0 bytes, default 64
<6>[ 16.673781] DMAR: No RMRR found
<6>[ 16.673798] DMAR: No ATSR found
<6>[ 16.673803] DMAR: dmar1: Using Queued invalidation
<6>[ 16.673834] DMAR: dmar0: Using Queued invalidation
<6>[ 16.673846] DMAR: dmar2: Using Queued invalidation
<6>[ 16.675005] pci 0000:00:04.0: Adding to iommu group 0
<6>[ 16.675104] pci 0000:00:05.0: Adding to iommu group 1
<6>[ 16.675201] pci 0000:00:0a.0: Adding to iommu group 2
<6>[ 16.675284] pci 0000:00:0b.0: Adding to iommu group 3
<6>[ 16.679740] pci 0000:00:02.0: Adding to iommu group 4
<6>[ 16.681478] pci 0000:00:00.0: Adding to iommu group 5
<6>[ 16.681573] pci 0000:00:07.0: Adding to iommu group 6
<6>[ 16.681660] pci 0000:00:07.1: Adding to iommu group 7
<6>[ 16.681751] pci 0000:00:07.2: Adding to iommu group 8
<6>[ 16.681872] pci 0000:00:0d.0: Adding to iommu group 9
<6>[ 16.681931] pci 0000:00:0d.2: Adding to iommu group 9
<6>[ 16.681989] pci 0000:00:0d.3: Adding to iommu group 9
<6>[ 16.682076] pci 0000:00:12.0: Adding to iommu group 10
<6>[ 16.682168] pci 0000:00:13.0: Adding to iommu group 11
<6>[ 16.682270] pci 0000:00:14.0: Adding to iommu group 12
<6>[ 16.682326] pci 0000:00:14.2: Adding to iommu group 12
<6>[ 16.682451] pci 0000:00:15.0: Adding to iommu group 13
<6>[ 16.682507] pci 0000:00:15.1: Adding to iommu group 13
<6>[ 16.682568] pci 0000:00:15.2: Adding to iommu group 13
<6>[ 16.682633] pci 0000:00:15.3: Adding to iommu group 13
<6>[ 16.682732] pci 0000:00:16.0: Adding to iommu group 14
<6>[ 16.682793] pci 0000:00:16.3: Adding to iommu group 14
<6>[ 16.682882] pci 0000:00:1c.0: Adding to iommu group 15
<6>[ 16.682983] pci 0000:00:1c.4: Adding to iommu group 16
<6>[ 16.683129] pci 0000:00:1f.0: Adding to iommu group 17
<6>[ 16.683188] pci 0000:00:1f.3: Adding to iommu group 17
<6>[ 16.683246] pci 0000:00:1f.4: Adding to iommu group 17
<6>[ 16.683309] pci 0000:00:1f.5: Adding to iommu group 17
<6>[ 16.683368] pci 0000:00:1f.6: Adding to iommu group 17
<6>[ 16.683426] pci 0000:00:1f.7: Adding to iommu group 17
<6>[ 16.683506] pci 0000:7f:00.0: Adding to iommu group 18
<6>[ 16.683626] pci 0000:80:00.0: Adding to iommu group 19
<6>[ 16.697608] DMAR: Intel(R) Virtualization Technology for Directed I/O
<6>[ 16.697626] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[ 16.697634] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB)
<6>[ 16.703867] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 16.703933] clocksource: Switched to clocksource tsc
<6>[ 16.704113] platform rtc_cmos: registered platform RTC device (no PNP device found)
<5>[ 16.709281] Initialise system trusted keyrings
<5>[ 16.709382] Key type blacklist registered
<6>[ 16.709888] workingset: timestamp_bits=36 max_order=23 bucket_order=0
<6>[ 16.719761] zbud: loaded
<6>[ 16.721143] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 16.721296] ntfs3: Enabled Linux POSIX ACLs support
<6>[ 16.721303] ntfs3: Read-only LZX/Xpress compression included
<5>[ 16.721816] integrity: Platform Keyring initialized
<5>[ 16.721856] integrity: Machine keyring initialized
<6>[ 16.728122] xor: automatically using best checksumming function avx
<5>[ 16.728134] Key type asymmetric registered
<5>[ 16.728148] Asymmetric key parser 'x509' registered
<6>[ 16.728290] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
<6>[ 16.728817] io scheduler mq-deadline registered
<6>[ 16.729941] ledtrig-cpu: registered to indicate activity on CPUs
<6>[ 16.731679] pcieport 0000:00:07.0: PME: Signaling with IRQ 126
<6>[ 16.732242] pcieport 0000:00:07.0: AER: enabled with IRQ 126
<6>[ 16.733509] pcieport 0000:00:07.1: PME: Signaling with IRQ 127
<6>[ 16.734065] pcieport 0000:00:07.1: AER: enabled with IRQ 127
<6>[ 16.735302] pcieport 0000:00:07.2: PME: Signaling with IRQ 128
<6>[ 16.735794] pcieport 0000:00:07.2: AER: enabled with IRQ 128
<6>[ 16.736943] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129
<6>[ 16.737445] pcieport 0000:00:1c.0: AER: enabled with IRQ 129
<6>[ 16.739025] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130
<6>[ 16.739577] pcieport 0000:00:1c.4: AER: enabled with IRQ 130
<6>[ 16.740313] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<7>[ 16.743314] Monitor-Mwait will be used to enter C-1 state
<7>[ 16.743460] Monitor-Mwait will be used to enter C-2 state
<7>[ 16.743514] Monitor-Mwait will be used to enter C-3 state
<6>[ 16.747735] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0
<6>[ 16.747939] ACPI: button: Lid Switch [LID0]
<6>[ 16.748181] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
<6>[ 16.748352] ACPI: button: Sleep Button [SLPB]
<6>[ 16.748552] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
<6>[ 16.748863] ACPI: button: Power Button [PWRB]
<4>[ 16.756721] ACPI Warning: \_SB.PR00._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 16.762768] ACPI Warning: \_SB.PR01._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 16.771565] ACPI Warning: \_SB.PR02._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 16.784634] ACPI Warning: \_SB.PR03._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 16.792396] ACPI Warning: \_SB.PR04._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 16.799740] ACPI Warning: \_SB.PR05._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 16.807149] ACPI Warning: \_SB.PR06._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 16.814988] ACPI Warning: \_SB.PR07._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<6>[ 16.914553] thermal LNXTHERM:00: registered as thermal_zone0
<6>[ 16.914570] ACPI: thermal: Thermal Zone [TZ00] (57 C)
<6>[ 16.916148] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[ 16.916678] ACPI: battery: Slot [BAT1] (battery absent)
<6>[ 16.917205] ACPI: battery: Slot [BAT0] (battery present)
<6>[ 16.939240] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
<6>[ 16.952782] serial 0000:00:12.0: enabling device (0000 -> 0002)
<6>[ 16.954620] serial 0000:00:16.3: enabling device (0001 -> 0003)
<6>[ 16.977447] 0000:00:16.3: ttyS4 at I/O 0x4020 (irq = 19, base_baud = 115200) is a 16550A
<4>[ 16.979425] hpet_acpi_add: no address or irqs in _CRS
<6>[ 16.979678] Linux agpgart interface v0.103
<6>[ 16.980506] ACPI: bus type drm_connector registered
<6>[ 16.999904] loop: module loaded
<6>[ 17.050851] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
<6>[ 17.189036] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
<6>[ 17.356856] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
<6>[ 17.594926] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
<5>[ 17.702672] Key type psk registered
<6>[ 17.704709] nvme 0000:80:00.0: platform quirk: setting simple suspend
<6>[ 17.705126] tun: Universal TUN/TAP device driver, 1.6
<6>[ 17.706100] nvme nvme0: pci function 0000:80:00.0
<6>[ 17.706306] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 17.706379] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
<6>[ 17.708019] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 17.709238] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 17.709252] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
<6>[ 17.709266] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 17.709500] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 17.709513] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 17.709519] usb usb1: Product: xHCI Host Controller
<6>[ 17.709523] usb usb1: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[ 17.709528] usb usb1: SerialNumber: 0000:00:0d.0
<6>[ 17.713199] hub 1-0:1.0: USB hub found
<6>[ 17.713631] hub 1-0:1.0: 1 port detected
<6>[ 17.730144] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 17.730180] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 17.730200] usb usb2: Product: xHCI Host Controller
<6>[ 17.730213] usb usb2: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[ 17.730227] usb usb2: SerialNumber: 0000:00:0d.0
<6>[ 17.731632] hub 2-0:1.0: USB hub found
<6>[ 17.731709] hub 2-0:1.0: 3 ports detected
<6>[ 17.745392] nvme nvme0: 8/0/0 default/read/poll queues
<6>[ 17.758134] nvme0n1: p1 p2
<6>[ 17.778199] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 17.778269] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
<6>[ 17.780656] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 17.783532] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 17.783568] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
<6>[ 17.783596] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 17.783932] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 17.783954] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 17.783971] usb usb3: Product: xHCI Host Controller
<6>[ 17.783983] usb usb3: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[ 17.783997] usb usb3: SerialNumber: 0000:00:14.0
<6>[ 17.786135] hub 3-0:1.0: USB hub found
<6>[ 17.786436] hub 3-0:1.0: 8 ports detected
<6>[ 17.842071] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 17.842185] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 17.842258] usb usb4: Product: xHCI Host Controller
<6>[ 17.842307] usb usb4: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[ 17.842363] usb usb4: SerialNumber: 0000:00:14.0
<6>[ 17.846295] hub 4-0:1.0: USB hub found
<6>[ 17.846554] hub 4-0:1.0: 2 ports detected
<6>[ 17.859619] usbcore: registered new interface driver usb-storage
<6>[ 17.859824] usbcore: registered new interface driver usbserial_generic
<6>[ 17.859970] usbserial: USB Serial support registered for generic
<6>[ 17.860059] usbcore: registered new interface driver ftdi_sio
<6>[ 17.860119] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[ 17.860202] usbcore: registered new interface driver pl2303
<6>[ 17.860263] usbserial: USB Serial support registered for pl2303
<6>[ 17.860467] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>[ 17.860483] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<3>[ 18.577352] i8042: Can't read CTR while initializing i8042
<3>[ 18.577374] i8042 i8042: probe with driver i8042 failed with error -5
<6>[ 18.578531] mousedev: PS/2 mouse device common for all mice
<6>[ 18.579814] rtc_cmos rtc_cmos: RTC can wake from S4
<6>[ 18.581730] rtc_cmos rtc_cmos: registered as rtc0
<6>[ 18.581962] rtc_cmos rtc_cmos: setting system clock to 2025-03-03T08:18:27 UTC (1740989907)
<6>[ 18.582130] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
<6>[ 18.582183] i2c_dev: i2c /dev entries driver
<6>[ 18.585138] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0)
<6>[ 18.585158] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
<4>[ 18.585171] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
<6>[ 18.585226] device-mapper: uevent: version 1.0.3
<6>[ 18.585655] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
<6>[ 18.585811] platform eisa.0: Probing EISA bus 0
<4>[ 18.585840] platform eisa.0: EISA: Cannot allocate resource for mainboard
<4>[ 18.585858] platform eisa.0: Cannot allocate resource for EISA slot 1
<4>[ 18.585873] platform eisa.0: Cannot allocate resource for EISA slot 2
<4>[ 18.585888] platform eisa.0: Cannot allocate resource for EISA slot 3
<4>[ 18.585903] platform eisa.0: Cannot allocate resource for EISA slot 4
<4>[ 18.585917] platform eisa.0: Cannot allocate resource for EISA slot 5
<4>[ 18.585933] platform eisa.0: Cannot allocate resource for EISA slot 6
<4>[ 18.585950] platform eisa.0: Cannot allocate resource for EISA slot 7
<4>[ 18.585967] platform eisa.0: Cannot allocate resource for EISA slot 8
<6>[ 18.585980] platform eisa.0: EISA: Detected 0 cards
<6>[ 18.585992] intel_pstate: Intel P-state driver initializing
<6>[ 18.591183] Hybrid CPU capacity scaling enabled
<6>[ 18.593782] intel_pstate: HWP enabled
<6>[ 18.593796] sdhci: Secure Digital Host Controller Interface driver
<6>[ 18.593810] sdhci: Copyright(c) Pierre Ossman
<6>[ 18.594026] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 18.599206] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c]
<6>[ 18.600567] drop_monitor: Initializing network drop monitor service
<6>[ 18.600929] NET: Registered PF_INET6 protocol family
<6>[ 18.605747] Segment Routing with IPv6
<6>[ 18.605819] In-situ OAM (IOAM) with IPv6
<6>[ 18.605909] NET: Registered PF_PACKET protocol family
<5>[ 18.606248] Key type dns_resolver registered
<4>[ 18.611555] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<6>[ 18.612318] microcode: Current revision: 0x0000011b
<6>[ 18.613428] IPI shorthand broadcast: enabled
<6>[ 18.630892] sched_clock: Marking stable (18621000650, 9826326)->(18789574783, -158747807)
<6>[ 18.631697] registered taskstats version 1
<5>[ 18.633202] Loading compiled-in X.509 certificates
<6>[ 18.661020] Demotion targets for Node 0: null
<6>[ 18.661252] kmemleak: Kernel memory leak detector initialized (mem pool available: 14949)
<6>[ 18.661270] kmemleak: Automatic memory scanning thread started
<5>[ 18.661442] Key type .fscrypt registered
<5>[ 18.661447] Key type fscrypt-provisioning registered
<6>[ 18.664006] Btrfs loaded, zoned=yes, fsverity=yes
<5>[ 18.666255] Key type encrypted registered
<6>[ 18.666263] AppArmor: AppArmor sha256 policy hashing enabled
<6>[ 18.666467] ima: No TPM chip found, activating TPM-bypass!
<5>[ 18.666480] Loading compiled-in module X.509 certificates
<5>[ 18.667295] Loaded X.509 cert 'Build time autogenerated kernel key: 8eb88e436fa37b9ab2af863311d489956c4460ad'
<6>[ 18.667307] ima: Allocated hash algorithm: sha256
<6>[ 18.667350] ima: No architecture policies found
<6>[ 18.667446] evm: Initialising EVM extended attributes:
<6>[ 18.667451] evm: security.selinux
<6>[ 18.667454] evm: security.SMACK64
<6>[ 18.667457] evm: security.SMACK64EXEC
<6>[ 18.667461] evm: security.SMACK64TRANSMUTE
<6>[ 18.667464] evm: security.SMACK64MMAP
<6>[ 18.667467] evm: security.apparmor
<6>[ 18.667470] evm: security.ima
<6>[ 18.667473] evm: security.capability
<6>[ 18.667477] evm: HMAC attrs: 0x1
<6>[ 18.669406] PM: Magic number: 1:324:320
<6>[ 18.669411] platform microcode: hash matches
<6>[ 18.669464] tty tty45: hash matches
<6>[ 18.669547] memory memory174: hash matches
<6>[ 18.669638] printk: legacy console [netcon0] enabled
<6>[ 18.669644] netconsole: network logging started
<6>[ 18.670223] RAS: Correctable Errors collector initialized.
<6>[ 18.670350] clk: Disabling unused clocks
<6>[ 18.670359] PM: genpd: Disabling unused power domains
<6>[ 18.670866] md: Waiting for all devices to be available before autodetect
<6>[ 18.670873] md: If you don't use raid, use raid=noautodetect
<6>[ 18.670879] md: Autodetecting RAID arrays.
<6>[ 18.670889] md: autorun ...
<6>[ 18.670893] md: ... autorun DONE.
<6>[ 18.723223] EXT4-fs (nvme0n1p2): mounted filesystem d94563f3-71a5-4472-983a-b9d25270145b ro with ordered data mode. Quota mode: none.
<6>[ 18.723290] VFS: Mounted root (ext4 filesystem) readonly on device 259:2.
<6>[ 18.723812] devtmpfs: mounted
<6>[ 18.734704] Freeing unused decrypted memory: 2028K
<6>[ 18.735590] Freeing unused kernel image (initmem) memory: 5632K
<6>[ 18.735612] Write protecting the kernel read-only data: 34816k
<6>[ 18.736077] Freeing unused kernel image (text/rodata gap) memory: 60K
<6>[ 18.736436] Freeing unused kernel image (rodata/data gap) memory: 968K
<6>[ 18.740819] x86/mm: Checked W+X mappings: passed, no W+X pages found.
<6>[ 18.740847] Run /sbin/init as init process
<7>[ 18.740851] with arguments:
<7>[ 18.740852] /sbin/init
<7>[ 18.740853] with environment:
<7>[ 18.740854] HOME=/
<7>[ 18.740854] TERM=linux
<7>[ 18.740855] BOOT_IMAGE=/boot/drm_intel
<7>[ 18.789762] systemd[1]: Inserted module 'autofs4'
<7>[ 18.808472] systemd[1]: systemd 255.4-1ubuntu8.5 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
<7>[ 18.808536] systemd[1]: Detected architecture x86-64.
<7>[ 18.810492] systemd[1]: Hostname set to <shard-lnl-6>.
<7>[ 19.054264] systemd[1]: Queued start job for default target graphical.target.
<7>[ 19.101574] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
<7>[ 19.103645] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
<7>[ 19.104983] systemd[1]: Created slice user.slice - User and Session Slice.
<7>[ 19.105208] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
<7>[ 19.105812] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
<7>[ 19.105945] systemd[1]: Expecting device dev-disk-by\x2duuid-BBCC\x2dD8CD.device - /dev/disk/by-uuid/BBCC-D8CD...
<7>[ 19.106024] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
<7>[ 19.106103] systemd[1]: Reached target slices.target - Slice Units.
<7>[ 19.106167] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
<7>[ 19.106231] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
<7>[ 19.106297] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
<7>[ 19.106541] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
<7>[ 19.106902] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
<7>[ 19.107168] systemd[1]: Listening on multipathd.socket - multipathd control socket.
<7>[ 19.107468] systemd[1]: Listening on syslog.socket - Syslog Socket.
<7>[ 19.107704] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
<7>[ 19.107892] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
<7>[ 19.108159] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
<7>[ 19.108455] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
<7>[ 19.108715] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
<7>[ 19.108891] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 19.109154] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
<7>[ 19.109414] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
<7>[ 19.112526] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
<7>[ 19.114954] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
<7>[ 19.117543] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
<7>[ 19.120122] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
<7>[ 19.125525] systemd[1]: Starting systemd-journald.service - Journal Service...
<7>[ 19.128582] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
<7>[ 19.132267] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
<7>[ 19.135222] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
<7>[ 19.138886] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
<7>[ 19.141500] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
<7>[ 19.145263] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
<7>[ 19.149463] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
<7>[ 19.157397] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
<7>[ 19.162072] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
<7>[ 19.165572] systemd-journald[212]: Collecting audit messages is disabled.
<7>[ 19.167750] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
<7>[ 19.168714] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
<7>[ 19.176302] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
<6>[ 19.179849] pstore: Using crash dump compression: deflate
<7>[ 19.181899] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
<7>[ 19.182024] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 19.182097] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<6>[ 19.184612] fuse: init (API version 7.42)
<6>[ 19.186412] pstore: Registered efi_pstore as persistent store backend
<7>[ 19.189662] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
<7>[ 19.195943] systemd[1]: Started systemd-journald.service - Journal Service.
<6>[ 19.337685] EXT4-fs (nvme0n1p2): re-mounted d94563f3-71a5-4472-983a-b9d25270145b r/w. Quota mode: none.
<6>[ 19.376753] Adding 8388604k swap on /swap.img. Priority:-2 extents:66 across:306577408k SS
<7>[ 19.390568] systemd-journald[212]: Received client request to flush runtime journal.
<7>[ 19.408600] systemd-journald[212]: /var/log/journal/969c3e4a3b0c44bb886902ddd4fce94a/system.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 19.408620] systemd-journald[212]: Rotating system journal.
<4>[ 20.066064] nvme nvme0: using unchecked data buffer
<4>[ 20.193984] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.194009] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.194034] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.194058] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.194083] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.194107] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.194132] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.194157] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.194181] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.194206] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.194231] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.194255] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.194280] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.194304] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.194330] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.194355] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.194378] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.194414] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.194439] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.194463] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.194488] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.194512] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.194537] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.194562] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.194586] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.194615] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.194635] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.194678] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.194698] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.194723] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.194748] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.194772] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.194812] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.195065] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.195084] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.195108] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.195133] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.195158] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<6>[ 20.210229] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002)
<4>[ 20.210662] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.210687] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.210711] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.210736] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.210760] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.210785] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.210821] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.210995] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.211201] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.211271] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.211306] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.211354] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.211483] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.211506] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.211531] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.211567] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.211603] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.211627] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.211652] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.211677] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.211701] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.211726] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.211750] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.211775] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.211800] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.211824] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.211872] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.211889] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.211914] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.211939] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258113] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258133] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258153] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258172] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258192] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258212] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258232] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258291] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258303] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258316] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258328] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258341] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258353] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258366] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258378] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258391] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258403] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258416] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258436] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258456] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258469] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258481] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258521] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258534] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258546] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258572] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258584] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258597] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258609] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258624] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258636] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258649] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258661] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258674] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258686] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258699] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258711] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258724] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.258736] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.274341] gpio gpiochip3: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.274366] gpio gpiochip3: gpiochip_add_data_with_key: get_direction failed: -22
<6>[ 20.279639] input: Intel HID events as /devices/platform/INTC107B:00/input/input3
<6>[ 20.291284] intel-hid INTC107B:00: platform supports 5 button array
<6>[ 20.307274] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4
<6>[ 20.311811] pci 0000:00:05.0: Setting to D3hot
<6>[ 20.324272] pci 0000:00:0b.0: Setting to D3hot
<4>[ 20.325468] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.325488] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.325507] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.325520] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.325532] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.325552] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.325564] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.325576] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.325589] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.325638] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.325649] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.325672] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.325684] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.325707] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.325720] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.325733] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.325745] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.325794] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.325826] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.325846] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.325858] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.325873] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.325885] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.325897] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.325910] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.325930] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.325980] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.325999] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.326019] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.326063] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.326083] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.326103] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.326123] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.326143] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.326163] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.326183] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.326195] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.326208] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.326220] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.326233] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.326245] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.326258] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.326270] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.326283] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.326295] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 20.335937] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform
<6>[ 20.336219] intel_pmc_core INT33A1:00: initialized
<3>[ 20.373620] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121
<3>[ 20.408838] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121
<5>[ 20.436524] audit: type=1400 audit(1740989909.352:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=435 comm="apparmor_parser"
<5>[ 20.437136] audit: type=1400 audit(1740989909.353:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=431 comm="apparmor_parser"
<5>[ 20.437461] audit: type=1400 audit(1740989909.353:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=433 comm="apparmor_parser"
<5>[ 20.437697] audit: type=1400 audit(1740989909.353:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=439 comm="apparmor_parser"
<5>[ 20.438452] audit: type=1400 audit(1740989909.354:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=434 comm="apparmor_parser"
<5>[ 20.438794] audit: type=1400 audit(1740989909.354:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=430 comm="apparmor_parser"
<5>[ 20.439582] audit: type=1400 audit(1740989909.355:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=438 comm="apparmor_parser"
<5>[ 20.440062] audit: type=1400 audit(1740989909.356:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=436 comm="apparmor_parser"
<5>[ 20.447693] audit: type=1400 audit(1740989909.363:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-run" pid=442 comm="apparmor_parser"
<5>[ 20.449499] audit: type=1400 audit(1740989909.365:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="vscode" pid=445 comm="apparmor_parser"
<6>[ 20.726016] idma64 idma64.0: Found Intel integrated DMA 64-bit
<6>[ 20.738755] ACPI: bus type thunderbolt registered
<6>[ 20.743111] idma64 idma64.1: Found Intel integrated DMA 64-bit
<6>[ 20.761303] idma64 idma64.2: Found Intel integrated DMA 64-bit
<6>[ 20.792987] idma64 idma64.3: Found Intel integrated DMA 64-bit
<6>[ 20.794687] e1000e: Intel(R) PRO/1000 Network Driver
<6>[ 20.794694] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<6>[ 20.794813] e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
<6>[ 20.796348] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
<6>[ 20.852070] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002)
<6>[ 20.855238] r8169 0000:7f:00.0: enabling device (0000 -> 0003)
<6>[ 20.871071] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43
<6>[ 20.871079] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS
<6>[ 20.900675] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, 50:91:e3:c9:15:be, XID 541, IRQ 176
<6>[ 20.900685] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
<6>[ 20.910528] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402)
<6>[ 20.913132] intel_rapl_common: Found RAPL domain package
<6>[ 20.913137] intel_rapl_common: Found RAPL domain dram
<6>[ 20.996658] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0
<6>[ 21.017754] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0
<6>[ 21.037324] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
<6>[ 21.037330] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
<6>[ 21.037331] RAPL PMU: hw unit of domain package 2^-14 Joules
<6>[ 21.037333] RAPL PMU: hw unit of domain dram 2^-14 Joules
<6>[ 21.037334] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
<6>[ 21.037335] RAPL PMU: hw unit of domain psys 2^-14 Joules
<6>[ 21.058634] cryptd: max_cpu_qlen set to 1000
<6>[ 21.102284] AES CTR mode by8 optimization enabled
<4>[ 21.264799] block nvme0n1: No UUID available providing old NGUID
<6>[ 21.305114] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
<6>[ 21.431736] evm: overlay not supported
<6>[ 21.460526] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 90:49:fa:0a:35:92
<6>[ 21.460535] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection
<6>[ 21.460661] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF
<6>[ 21.493253] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin
<6>[ 21.521366] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888
<6>[ 21.521372] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716
<6>[ 21.521375] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472
<6>[ 21.847346] intel_rapl_common: Found RAPL domain package
<6>[ 21.847353] intel_rapl_common: Found RAPL domain core
<6>[ 21.847623] intel_rapl_common: Found RAPL domain uncore
<6>[ 21.847625] intel_rapl_common: Found RAPL domain dram
<6>[ 21.847627] intel_rapl_common: Found RAPL domain psys
<6>[ 21.935884] r8169 0000:7f:00.0 enp127s0: renamed from eth0
<6>[ 21.970051] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth1
<6>[ 21.973811] loop0: detected capacity change from 0 to 8
<4>[ 22.012674] spi-nor spi0.0: supply vcc not found, using dummy regulator
<5>[ 22.068743] Creating 1 MTD partitions on "0000:00:1f.5":
<5>[ 22.068760] 0x000000000000-0x000002000000 : "BIOS"
<6>[ 22.325086] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC)
<6>[ 22.370410] Consider using thermal netlink events interface
<6>[ 22.486038] r8169 0000:7f:00.0 enp127s0: Link is Down
<6>[ 22.515807] hid: raw HID events driver (C) Jiri Kosina
<6>[ 22.521936] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
<6>[ 22.555954] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 22.557132] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 22.558408] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 22.559074] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 22.560249] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 22.561476] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 22.567621] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 22.571461] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 22.575296] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 22.578184] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 22.581348] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 22.583692] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 23.263872] typec port0: bound usb3-port1 (ops connector_ops)
<6>[ 23.263899] typec port0: bound usb2-port1 (ops connector_ops)
<6>[ 24.242759] typec port1: bound usb3-port2 (ops connector_ops)
<6>[ 24.242788] typec port1: bound usb2-port2 (ops connector_ops)
<6>[ 26.053523] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off
<7>[ 31.880883] systemd-journald[212]: /var/log/journal/969c3e4a3b0c44bb886902ddd4fce94a/user-1000.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 50.699096] [IGT] xe_module_load: executing
<7>[ 50.711197] [IGT] xe_module_load: starting subtest load
<5>[ 50.891207] Setting dangerous option force_probe - tainting kernel
<6>[ 50.893916] xe 0000:00:02.0: vgaarb: deactivate vga console
<6>[ 50.895328] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0
<7>[ 50.895341] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG / Xe2_HPG / Xe3_LPG (20.04) media:Xe2_LPM / Xe2_HPM / Xe3_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0
<7>[ 50.895446] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)
<7>[ 50.895535] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)
<6>[ 50.900282] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.36.0
<7>[ 50.903938] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002523d7
<7>[ 50.904021] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7>[ 50.904090] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000
<7>[ 50.904156] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 50.904213] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006ca
<7>[ 50.904268] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 50.904322] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 50.904374] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 50.904425] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 50.904475] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 50.904523] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 50.904571] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 50.904618] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 50.904665] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 50.904713] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 50.904804] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7>[ 50.905944] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[ 50.906036] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 50.910905] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x80000534 [0x1A/05]
<7>[ 50.913648] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 7ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 50.914618] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 50.914737] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT safe-mode enabled
<7>[ 50.914893] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,0000007f
<7>[ 50.914999] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,0000007f
<7>[ 50.915099] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 000000ff
<7>[ 50.915197] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 50.915289] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,000000ff
<6>[ 50.916048] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.36.0
<7>[ 50.920064] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c5e3d7
<7>[ 50.920154] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 50.920226] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000
<7>[ 50.920298] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 50.920364] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae2
<7>[ 50.920426] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 50.920487] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 50.920547] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 50.920606] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 50.920663] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 50.920720] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 50.920776] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 50.920841] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 50.920895] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<6>[ 50.922161] xe 0000:00:02.0: [drm] Using HuC firmware from xe/lnl_huc.bin version 9.4.13
<6>[ 50.924331] xe 0000:00:02.0: [drm] Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.0.1263
<6>[ 50.925170] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])
<7>[ 50.925249] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 50.925344] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7>[ 50.926767] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 50.926937] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000068 [0x34/00]
<7>[ 50.927009] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 50.947164] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 50.947645] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 50.947884] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT safe-mode enabled
<7>[ 50.948096] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,00000000
<7>[ 50.948280] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,00000000
<7>[ 50.948455] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 00000000
<7>[ 50.948621] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 50.948785] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,0000000f
<7>[ 50.949533] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes
<7>[ 50.949902] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7>[ 50.950205] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018
<7>[ 50.950505] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0
<7>[ 50.950807] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported
<7>[ 50.951055] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported
<7>[ 50.951266] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported
<7>[ 50.951477] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present
<7>[ 50.951713] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)
<7>[ 50.951929] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num qgv points 4
<7>[ 50.952159] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8
<7>[ 50.952368] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes
<7>[ 50.952578] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152
<7>[ 50.952792] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296
<7>[ 50.953011] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392
<7>[ 50.953218] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520
<7>[ 50.953399] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400
<7>[ 50.953577] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800
<7>[ 50.953750] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 50.953931] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 50.954125] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400
<7>[ 50.954293] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 50.954448] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 50.954600] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 50.954747] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400
<7>[ 50.954905] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 50.955047] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 50.955187] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 50.955324] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400
<7>[ 50.955457] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 50.955589] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 50.955720] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 50.955851] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400
<7>[ 50.955989] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 50.956115] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 50.956238] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 50.956352] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400
<7>[ 50.956463] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 50.956572] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 50.956677] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 50.956785] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7>[ 50.957590] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7>[ 50.957708] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 260
<7>[ 50.957815] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7>[ 50.957938] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7>[ 50.958041] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7>[ 50.958139] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7>[ 50.958239] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 848, min size 848)
<7>[ 50.958333] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7>[ 50.958424] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7>[ 50.958529] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7>[ 50.958628] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7>[ 50.958726] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7>[ 50.958818] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7>[ 50.958926] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7>[ 50.959016] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7>[ 50.959098] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7>[ 50.959179] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7>[ 50.959256] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 260 not known; assuming 40
<7>[ 50.959331] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806
<7>[ 50.959412] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 50.959487] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 50.959561] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 50.959635] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7>[ 50.959705] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[ 50.959776] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 50.959850] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 50.959922] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 50.959999] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a
<7>[ 50.960110] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 50.960267] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7>[ 50.960402] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 50.960544] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7>[ 50.960717] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.
<7>[ 50.960856] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7>[ 50.960950] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 50.961047] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 50.961170] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6>[ 50.961261] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=mem
<7>[ 50.961283] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7>[ 50.961378] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7>[ 50.961460] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7>[ 50.961544] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7>[ 50.961914] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC
<7>[ 50.962085] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin
<7>[ 50.963323] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7>[ 50.963429] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7>[ 50.963524] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7>[ 50.963612] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)
<7>[ 50.963696] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)
<7>[ 50.963778] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57b856f4 (EVT_HTP)
<7>[ 50.963881] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7>[ 50.963987] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0
<7>[ 50.964092] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 50.964196] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)
<7>[ 50.964275] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7>[ 50.964297] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 50.964388] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)
<7>[ 50.964396] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us
<7>[ 50.964476] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 50.964495] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 9 (9.0 usec)
<7>[ 50.964571] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)
<7>[ 50.964598] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 103 (103.0 usec)
<7>[ 50.964673] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7>[ 50.964699] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 103 (103.0 usec)
<7>[ 50.964768] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0
<7>[ 50.964798] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 103 (103.0 usec)
<7>[ 50.964867] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 50.964904] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 96 (96.0 usec)
<7>[ 50.964958] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)
<7>[ 50.964998] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 103 (103.0 usec)
<7>[ 50.965047] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 50.965136] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)
<7>[ 50.965224] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 50.965311] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)
<7>[ 50.965401] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7>[ 50.965486] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0
<7>[ 50.965571] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 50.965655] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)
<7>[ 50.965739] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 50.965822] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)
<7>[ 50.965922] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 50.966005] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)
<7>[ 50.969017] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available.
<7>[ 50.971772] xe 0000:00:02.0: [drm:intel_cdclk_dump_config [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 50.971919] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7>[ 50.972046] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7>[ 50.972253] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:188:DDI A/PHY A] Using AUX CH A (VBT)
<7>[ 50.972493] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:188:DDI A/PHY A]
<7>[ 50.972720] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2
<7>[ 50.972905] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2
<7>[ 50.973056] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless
<7>[ 50.973201] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7>[ 50.973337] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300
<7>[ 50.973469] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002
<7>[ 50.973602] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName
<7>[ 50.973731] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz
<7>[ 50.973866] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7>[ 50.974201] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:188:DDI A/PHY A] initial power sequencer: PPS 0
<7>[ 50.974469] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 50.974608] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 50.974730] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 50.974854] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 50.974971] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 50.975238] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 50.975575] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 50.976892] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<6>[ 50.976985] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.28)
<7>[ 50.977042] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7>[ 50.978932] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 50.979552] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000
<7>[ 50.980401] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e
<7>[ 50.981771] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3
<7>[ 50.982313] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported
<7>[ 50.984502] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 50.994530] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 50.994547] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 50.994550] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 50.994551] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 50.994555] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 50.994557] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 50.994562] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 50.994564] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 50.994567] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 50.994615] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 50.994617] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 50.994619] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 50.994630] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:189:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 50.995194] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:189:eDP-1] Performing OUI wait (0 ms)
<7>[ 50.995745] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:189:eDP-1] Detected unsupported HDR backlight interface version 0
<7>[ 50.995863] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:189:eDP-1] DRRS type: none
<7>[ 50.996012] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:189:eDP-1] Using native PCH PWM for backlight control (controller=0)
<7>[ 50.996144] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:189:eDP-1] backlight initialized, enabled, brightness 192000/192000
<7>[ 50.996317] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 50.996418] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 50.996512] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 50.996604] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 50.996695] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 50.996817] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 50.997055] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:197:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)
<7>[ 50.997247] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 50.997395] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 50.997853] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:209:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)
<7>[ 50.997998] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 50.998133] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 50.998425] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:217:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)
<7>[ 50.998558] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 50.998689] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 50.999288] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:82:pipe A] hw state readout: enabled
<7>[ 50.999441] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:134:pipe B] hw state readout: disabled
<7>[ 50.999574] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:186:pipe C] hw state readout: disabled
<7>[ 50.999664] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] hw state readout: enabled, pipe A
<7>[ 50.999750] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] hw state readout: disabled, pipe A
<7>[ 50.999876] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] hw state readout: disabled, pipe A
<7>[ 50.999966] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] hw state readout: disabled, pipe A
<7>[ 51.000050] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] hw state readout: disabled, pipe A
<7>[ 51.000132] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] hw state readout: disabled, pipe A
<7>[ 51.000215] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] hw state readout: disabled, pipe B
<7>[ 51.000298] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] hw state readout: disabled, pipe B
<7>[ 51.000381] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] hw state readout: disabled, pipe B
<7>[ 51.000463] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] hw state readout: disabled, pipe B
<7>[ 51.000545] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] hw state readout: disabled, pipe B
<7>[ 51.000627] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] hw state readout: disabled, pipe B
<7>[ 51.000709] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] hw state readout: disabled, pipe C
<7>[ 51.000792] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] hw state readout: disabled, pipe C
<7>[ 51.000882] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] hw state readout: disabled, pipe C
<7>[ 51.000965] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] hw state readout: disabled, pipe C
<7>[ 51.001046] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] hw state readout: disabled, pipe C
<7>[ 51.001126] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] hw state readout: disabled, pipe C
<7>[ 51.001924] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
<7>[ 51.002052] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:188:DDI A/PHY A] hw state readout: enabled, pipe A
<7>[ 51.002158] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected)
<7>[ 51.002259] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:197:DDI TC1/PHY TC1] hw state readout: disabled, pipe A
<7>[ 51.002349] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:199:DP-MST A] hw state readout: disabled, pipe A
<7>[ 51.002435] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:200:DP-MST B] hw state readout: disabled, pipe B
<7>[ 51.002519] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:201:DP-MST C] hw state readout: disabled, pipe C
<7>[ 51.002605] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected)
<7>[ 51.002693] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:209:DDI TC2/PHY TC2] hw state readout: disabled, pipe A
<7>[ 51.002778] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:211:DP-MST A] hw state readout: disabled, pipe A
<7>[ 51.002880] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:212:DP-MST B] hw state readout: disabled, pipe B
<7>[ 51.002964] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DP-MST C] hw state readout: disabled, pipe C
<7>[ 51.003048] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected)
<7>[ 51.003136] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DDI TC3/PHY TC3] hw state readout: disabled, pipe A
<7>[ 51.003223] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:219:DP-MST A] hw state readout: disabled, pipe A
<7>[ 51.003305] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:220:DP-MST B] hw state readout: disabled, pipe B
<7>[ 51.003385] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:221:DP-MST C] hw state readout: disabled, pipe C
<7>[ 51.003505] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:189:eDP-1] hw state readout: enabled
<7>[ 51.003595] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:198:DP-1] hw state readout: disabled
<7>[ 51.003679] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:210:DP-2] hw state readout: disabled
<7>[ 51.003761] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:218:DP-3] hw state readout: disabled
<7>[ 51.004044] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] min_cdclk 173855 kHz
<7>[ 51.004131] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] min_cdclk 0 kHz
<7>[ 51.004209] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] min_cdclk 0 kHz
<7>[ 51.004286] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] min_cdclk 0 kHz
<7>[ 51.004365] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] min_cdclk 0 kHz
<7>[ 51.004442] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] min_cdclk 0 kHz
<7>[ 51.004520] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe A data rate 1390840 num active planes 1
<7>[ 51.004640] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] min_cdclk 0 kHz
<7>[ 51.004727] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] min_cdclk 0 kHz
<7>[ 51.004808] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] min_cdclk 0 kHz
<7>[ 51.004892] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] min_cdclk 0 kHz
<7>[ 51.004973] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] min_cdclk 0 kHz
<7>[ 51.005052] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] min_cdclk 0 kHz
<7>[ 51.005129] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe B data rate 0 num active planes 0
<7>[ 51.005245] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] min_cdclk 0 kHz
<7>[ 51.005335] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] min_cdclk 0 kHz
<7>[ 51.005418] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] min_cdclk 0 kHz
<7>[ 51.005498] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] min_cdclk 0 kHz
<7>[ 51.005577] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] min_cdclk 0 kHz
<7>[ 51.005656] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] min_cdclk 0 kHz
<7>[ 51.005735] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe C data rate 0 num active planes 0
<7>[ 51.005895] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no
<7>[ 51.006012] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A
<7>[ 51.006241] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [setup_hw_state]
<7>[ 51.006351] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 51.006453] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
<7>[ 51.006553] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 51.006649] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 51.006743] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 51.006896] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 51.006994] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64
<7>[ 51.007089] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 51.007182] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 51.007274] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 51.007364] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7>[ 51.007455] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[ 51.007545] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7>[ 51.007636] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[ 51.007727] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 1, framestart delay: 1, MSA timing delay: 0
<7>[ 51.007816] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96
<7>[ 51.007913] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906
<7>[ 51.008004] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 51.008095] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 51.008184] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 51.008274] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 51.008364] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 51.008454] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 51.008543] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 51.008632] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 51.008721] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 51.008810] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 51.008903] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000
<7>[ 51.008995] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0
<7>[ 51.009085] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 51.009174] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 51.009263] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.009351] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.009439] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.009528] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 51.009617] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 51.009706] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.009794] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.009890] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.009980] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 51.010068] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:134:pipe B] enable: no [setup_hw_state]
<7>[ 51.010156] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:186:pipe C] enable: no [setup_hw_state]
<7>[ 51.010396] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:82:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no
<7>[ 51.010502] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:134:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 51.010596] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:186:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 51.010949] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:82:pipe A][PLANE:32:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800
<7>[ 51.011042] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:32:plane 1A] on [CRTC:82:pipe A]
<7>[ 51.055052] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT1: GuC CT safe-mode canceled
<7>[ 51.118982] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT0: GuC CT safe-mode canceled
<6>[ 51.259025] xe 0000:00:02.0: [drm] ccs1 fused off
<6>[ 51.259029] xe 0000:00:02.0: [drm] ccs2 fused off
<6>[ 51.259030] xe 0000:00:02.0: [drm] ccs3 fused off
<7>[ 51.259145] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add rcs0 whitelist to engine
<7>[ 51.259243] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 51.259329] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 51.259406] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 51.259498] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs0 whitelist to engine
<7>[ 51.259589] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs8 whitelist to engine
<7>[ 51.259681] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add ccs0 whitelist to engine
<7>[ 51.259748] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 51.259815] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 51.259896] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 51.260746] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs
<7>[ 51.260822] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000
<7>[ 51.260916] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000
<7>[ 51.260990] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440
<7>[ 51.261059] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000
<7>[ 51.261129] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000
<7>[ 51.261195] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f
<7>[ 51.261263] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1
<7>[ 51.261327] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16
<7>[ 51.261390] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc
<7>[ 51.261454] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 51.261517] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130
<7>[ 51.261579] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 51.261639] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100
<7>[ 51.261700] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100
<7>[ 51.261760] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100
<7>[ 51.261821] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100
<7>[ 51.261897] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100
<7>[ 51.261959] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100
<7>[ 51.262020] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100
<7>[ 51.262080] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100
<7>[ 51.262140] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100
<7>[ 51.262201] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100
<7>[ 51.262257] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100
<7>[ 51.262311] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100
<7>[ 51.262363] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs
<7>[ 51.262424] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306
<7>[ 51.262485] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080
<7>[ 51.262546] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d0] = 0x1000dafc
<7>[ 51.262606] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d4] = 0x1000db01
<7>[ 51.262664] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d8] = 0x0000db1c
<7>[ 51.262724] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040
<7>[ 51.262787] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200
<7>[ 51.262855] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000
<7>[ 51.262917] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08000800
<7>[ 51.262979] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002
<7>[ 51.263046] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000
<7>[ 51.263110] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000
<7>[ 51.263331] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs
<7>[ 51.263395] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306
<7>[ 51.263457] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080
<7>[ 51.263636] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs
<7>[ 51.263694] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306
<7>[ 51.263745] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080
<7>[ 51.264062] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs
<7>[ 51.264121] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0306
<7>[ 51.264176] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080
<7>[ 51.264237] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d0] = 0x1000dafc
<7>[ 51.264295] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d4] = 0x1000db01
<7>[ 51.264351] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d8] = 0x0000db1c
<7>[ 51.264727] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002523d7
<7>[ 51.264897] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000800
<7>[ 51.264963] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000014
<7>[ 51.265022] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 51.265078] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006ca
<7>[ 51.265131] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 51.265183] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 51.265232] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 51.265279] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 51.265326] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 51.265371] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 51.265415] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 51.265460] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 51.265503] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 51.265580] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs
<7>[ 51.265852] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells
<7>[ 51.268371] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 42 ext-regs.
<7>[ 51.282396] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: ADS capture alloc size changed from 45056 to 20480
<7>[ 51.283200] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[ 51.283281] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 51.293076] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 51.293483] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 51.294535] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA rcs0 save-restore batch
<7>[ 51.294641] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400
<7>[ 51.294741] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x00400040
<7>[ 51.294840] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020
<7>[ 51.294932] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = 0x3ca18000
<7>[ 51.295019] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240
<7>[ 51.295102] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000
<7>[ 51.295182] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420
<7>[ 51.295264] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000
<7>[ 51.298623] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA bcs0 save-restore batch
<7>[ 51.298709] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = 0x00000606
<7>[ 51.298794] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<7>[ 51.300845] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<6>[ 51.305815] xe 0000:00:02.0: [drm] vcs1 fused off
<6>[ 51.305817] xe 0000:00:02.0: [drm] vcs2 fused off
<6>[ 51.305818] xe 0000:00:02.0: [drm] vcs3 fused off
<6>[ 51.305819] xe 0000:00:02.0: [drm] vcs4 fused off
<6>[ 51.305819] xe 0000:00:02.0: [drm] vcs5 fused off
<6>[ 51.305820] xe 0000:00:02.0: [drm] vcs6 fused off
<6>[ 51.305821] xe 0000:00:02.0: [drm] vcs7 fused off
<6>[ 51.305822] xe 0000:00:02.0: [drm] vecs1 fused off
<6>[ 51.305823] xe 0000:00:02.0: [drm] vecs2 fused off
<6>[ 51.305823] xe 0000:00:02.0: [drm] vecs3 fused off
<7>[ 51.305856] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vcs0 whitelist to engine
<7>[ 51.305981] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vecs0 whitelist to engine
<7>[ 51.306103] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add gsccs0 whitelist to engine
<7>[ 51.306778] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs
<7>[ 51.306888] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000
<7>[ 51.306986] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000
<7>[ 51.307079] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440
<7>[ 51.307164] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000
<7>[ 51.307233] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000
<7>[ 51.307300] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f
<7>[ 51.307368] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f08] = 0x00000020
<7>[ 51.307432] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f10] = 0x00400000
<7>[ 51.307496] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f1c] = 0x00000008
<7>[ 51.307565] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1
<7>[ 51.307635] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16
<7>[ 51.307703] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc
<7>[ 51.307771] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 51.307839] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130
<7>[ 51.307914] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 51.307992] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100
<7>[ 51.308068] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100
<7>[ 51.308141] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100
<7>[ 51.308203] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100
<7>[ 51.308263] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100
<7>[ 51.308317] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100
<7>[ 51.308371] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100
<7>[ 51.308424] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100
<7>[ 51.308476] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100
<7>[ 51.308528] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100
<7>[ 51.308579] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100
<7>[ 51.308630] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100
<7>[ 51.308682] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs
<7>[ 51.308747] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000
<7>[ 51.309258] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs
<7>[ 51.309341] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000
<7>[ 51.309677] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs
<7>[ 51.309743] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000
<7>[ 51.310196] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c5e3d7
<7>[ 51.310261] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 51.310325] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000014
<7>[ 51.310387] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 51.310445] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae2
<7>[ 51.310501] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 51.310556] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 51.310609] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 51.310660] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 51.310711] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 51.310760] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 51.310809] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 51.310869] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 51.310933] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<7>[ 51.311015] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs
<7>[ 51.311117] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells
<7>[ 51.326374] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: ADS capture alloc size changed from 45056 to 24576
<7>[ 51.327530] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 51.327633] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x0000006A [0x35/00]
<7>[ 51.327696] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 51.347320] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 51.347685] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 51.348578] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 51.350817] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 51.352676] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 51.394879] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC
<7>[ 51.396896] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[ 51.397993] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[ 51.398338] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 2048) -> ( 0 - 0), size 2048 -> 0
<7>[ 51.398656] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] ddb ( 0 - 0) -> (4054 - 4096), size 0 -> 42
<7>[ 51.398945] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 51.399257] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 51.399559] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 51.399863] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 51.400209] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 51.401769] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x13410e72)
<7>[ 51.402773] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A)
<7>[ 51.403103] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7>[ 51.408400] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc010e72)
<7>[ 51.417619] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:189:eDP-1] adding connector to sysfs
<7>[ 51.422825] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:189:eDP-1] backlight device intel_backlight registered
<7>[ 51.423528] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
<7>[ 51.425629] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:189:eDP-1] generating connector hotplug event
<7>[ 51.425724] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:198:DP-1] adding connector to sysfs
<7>[ 51.426255] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1
<7>[ 51.426936] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:198:DP-1] generating connector hotplug event
<7>[ 51.426982] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:210:DP-2] adding connector to sysfs
<7>[ 51.427360] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2
<7>[ 51.427878] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:210:DP-2] generating connector hotplug event
<7>[ 51.427913] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:218:DP-3] adding connector to sysfs
<7>[ 51.428244] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3
<7>[ 51.428732] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:218:DP-3] generating connector hotplug event
<6>[ 51.428754] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0
<7>[ 51.428780] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected
<6>[ 51.436062] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6>[ 51.438420] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
<7>[ 51.439483] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7>[ 51.439589] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7>[ 51.440591] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:32:plane 1A] no fb, skipping
<7>[ 51.440677] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:134:pipe B] not active, skipping
<7>[ 51.440757] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:186:pipe C] not active, skipping
<7>[ 51.440840] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7>[ 51.441004] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 51.441137] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 51.441254] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:198:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 51.441348] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 51.441465] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 51.441553] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:210:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 51.441634] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 51.441737] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 51.441823] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:218:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 51.441917] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[ 51.442132] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 51.442364] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 51.442380] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 51.443215] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 51.443736] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 51.443861] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 51.443953] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 51.444154] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 51.444160] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.444162] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.444164] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 51.444166] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.444168] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 51.444172] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.444174] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 51.444176] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.444204] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 51.444314] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 51.445165] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 51.445329] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 51.446421] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] status updated from unknown to connected
<7>[ 51.446718] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<5>[ 51.447141] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.447144] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.447146] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.447195] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 51.447210] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 51.447221] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 51.447231] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 51.447406] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 51.447417] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 51.447426] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 51.447558] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 51.447567] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 51.447574] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 51.447697] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 51.447706] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 51.447710] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 51.447713] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 51.447716] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 51.447823] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 51.447849] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 51.447853] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 51.447857] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 51.447860] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7>[ 51.447878] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 51.447918] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<7>[ 51.447973] xe 0000:00:02.0: [drm:intelfb_create [xe]] no BIOS fb, allocating a new one
<6>[ 51.500229] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0
<7>[ 51.500372] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed
<7>[ 51.512109] xe 0000:00:02.0: [drm:intelfb_create [xe]] allocated 2880x1800 fb: 0x01d95000
<6>[ 51.512995] fbcon: xedrmfb (fb0) is primary device
<7>[ 51.514067] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:189:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7>[ 51.514205] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:188:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7>[ 51.514311] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7>[ 51.514419] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7>[ 51.514515] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:188:DDI A/PHY A] [CRTC:82:pipe A]
<7>[ 51.514608] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288)
<7>[ 51.514697] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10
<7>[ 51.514784] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7>[ 51.514890] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes,
<7>[ 51.515005] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1,
<7>[ 51.515116] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1.
<7>[ 51.515209] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 51.515298] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 51.515378] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7>[ 51.515457] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 51.515539] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 51.515625] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 51.515710] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7>[ 51.515802] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7>[ 51.515915] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no,
<7>[ 51.516016] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1.
<7>[ 51.516115] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 51.516196] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 51.516271] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7>[ 51.516349] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 51.516430] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 51.516510] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 51.516591] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7>[ 51.516671] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30)
<7>[ 51.516760] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000)
<7>[ 51.516853] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7>[ 51.516994] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054
<7>[ 51.517114] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7>[ 51.517220] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 3, 1 -> 2, 12, 12, 12, 11, 12, 0, 0, 0, 3, 0
<7>[ 51.517301] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] blocks 25, 25, 25, 25, 25, 25, 0, 0, 7, 73, 7 -> 49, 289, 289, 289, 265, 289, 0, 0, 63, 73, 87
<7>[ 51.517381] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 319, 319, 319, 293, 319, 0, 0, 64, 82, 88
<7>[ 51.517457] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 51.517527] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.517597] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.517673] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.517747] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 51.517821] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.517913] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.518002] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.518089] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 51.518175] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.518250] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.518330] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.518415] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 51.518498] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.518580] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.518654] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.518724] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 51.518791] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.518870] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.518950] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.519040] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:82:pipe A] data rate 1390840 num active planes 1
<7>[ 51.519171] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 51.519285] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 51.519396] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 51.519491] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 51.519581] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 51.519685] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (27165 kHz) > old min cdclk (0 kHz)
<7>[ 51.519835] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [modeset]
<7>[ 51.519950] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 51.520060] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7>[ 51.520164] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 51.520267] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 51.520349] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 51.520432] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 51.520512] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7>[ 51.520591] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 51.520670] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 51.520745] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 51.520819] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7>[ 51.520917] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[ 51.521008] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7>[ 51.521098] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7>[ 51.521187] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7>[ 51.521275] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7>[ 51.521363] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7>[ 51.521448] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7>[ 51.521532] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7>[ 51.521607] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[ 51.521677] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0
<7>[ 51.521747] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1906, vmax: 2859, flipline: 1906, pipeline full: 0, guardband: 106 vsync start: 103, vsync end: 97
<7>[ 51.521836] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1800, vmax vblank: 2753, vmin vtotal: 1906, vmax vtotal: 2859
<7>[ 51.521923] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 51.522009] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 51.522094] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 51.522178] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 51.522259] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 51.522339] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 51.522407] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 51.522475] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 51.522541] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 51.522607] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 51.522672] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7>[ 51.522736] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7>[ 51.522800] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 51.522883] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 51.523290] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.523312] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC
<7>[ 51.523385] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.523473] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.523559] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 51.523641] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 51.523723] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.523802] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.523893] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.523972] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 51.524050] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:32:plane 1A] fb: [FB:190] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7>[ 51.524128] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7>[ 51.524204] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7>[ 51.524275] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:41:plane 2A] fb: [NOFB], visible: no
<7>[ 51.524348] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:50:plane 3A] fb: [NOFB], visible: no
<7>[ 51.524425] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:59:plane 4A] fb: [NOFB], visible: no
<7>[ 51.524503] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:68:plane 5A] fb: [NOFB], visible: no
<7>[ 51.524580] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:77:cursor A] fb: [NOFB], visible: no
<7>[ 51.546263] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<7>[ 51.751053] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 0
<7>[ 51.752249] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7>[ 51.762633] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power off
<7>[ 51.762970] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 51.763251] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 51.763587] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power off time
<7>[ 51.763866] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7>[ 51.815982] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 51.816320] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 51.844882] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 51.845332] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 51.845372] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7>[ 51.846079] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 51.846098] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)
<7>[ 51.846422] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:188:DDI A/PHY A]
<7>[ 51.846758] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 51.847069] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:199:DP-MST A]
<7>[ 51.847332] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:200:DP-MST B]
<7>[ 51.847580] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:201:DP-MST C]
<7>[ 51.847824] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 51.848149] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:211:DP-MST A]
<7>[ 51.848405] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:212:DP-MST B]
<7>[ 51.848651] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DP-MST C]
<7>[ 51.848909] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 51.849199] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DP-MST A]
<7>[ 51.849430] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:220:DP-MST B]
<7>[ 51.849656] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:221:DP-MST C]
<7>[ 51.849906] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 51.850889] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power on
<7>[ 51.850925] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 51.851130] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power cycle (495 ms remaining)
<7>[ 51.851218] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 51.851481] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7>[ 51.851762] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 51.927403] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed
<7>[ 52.351146] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060
<7>[ 52.351665] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 52.352159] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power on
<7>[ 52.352646] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7>[ 52.388331] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 52.388496] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 52.388643] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7>[ 52.388845] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 52.456758] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 52.456758] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 52.456758] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 52.638900] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 52.640998] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 52.641318] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7>[ 52.644646] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 52.645939] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Reloading eDP link rates
<7>[ 52.647011] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7>[ 52.648171] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7>[ 52.649246] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7>[ 52.650575] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Clock recovery OK
<7>[ 52.650876] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7>[ 52.652538] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7>[ 52.652820] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7>[ 52.653581] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7>[ 52.654087] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7>[ 52.654419] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7>[ 52.654768] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 192000
<6>[ 52.657048] xe 0000:00:02.0: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
<7>[ 52.657073] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 11059200 bytes of contiguous stolen space for FBC, limit: 2
<7>[ 52.657391] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:32:plane 1A]
<7>[ 52.670946] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7>[ 52.673722] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:189:eDP-1]
<7>[ 52.674173] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:82:pipe A]
<7>[ 52.675622] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp
<6>[ 52.678877] Console: switching to colour frame buffer device 180x56
<6>[ 52.693354] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device
<7>[ 52.702035] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20
<7>[ 52.702524] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7>[ 52.702902] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7>[ 52.703217] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7>[ 52.703499] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7>[ 52.703761] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7>[ 52.704037] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7>[ 52.704289] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7>[ 52.704531] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7>[ 52.704770] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7>[ 52.705017] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7>[ 52.705237] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7>[ 52.705449] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7>[ 52.705656] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7>[ 52.705892] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7>[ 52.706091] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7>[ 52.706286] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7>[ 52.706475] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7>[ 52.706656] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7>[ 52.706853] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7>[ 52.707030] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7>[ 52.707198] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7>[ 52.707521] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]]
<7>[ 52.707559] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 52.708265] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 52.708294] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 52.708618] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device
<7>[ 52.708818] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC
<7>[ 52.709042] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7>[ 52.709414] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7>[ 52.709887] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7>[ 52.710297] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 52.710972] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 52.711687] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 52.712073] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 52.712401] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 52.713072] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 52.713091] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 52.713098] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.713104] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 52.713114] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.713120] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 52.713137] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.713143] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 52.713152] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.713213] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 52.713478] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 52.714562] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 52.714922] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 52.716817] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<5>[ 52.717354] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 52.717364] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 52.717369] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.717534] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 52.717595] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 52.717629] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 52.717661] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 52.718723] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 52.719730] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 52.720161] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[ 52.720608] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 52.721008] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 52.721064] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 52.721097] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 52.721471] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 52.721772] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 52.721807] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 52.721900] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 52.722256] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 52.722539] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 52.722574] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 52.722595] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 52.722607] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 52.722618] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 52.724264] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 52.724340] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 52.724354] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 52.724366] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 52.724377] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7>[ 52.724463] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 52.729162] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 52.729544] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7>[ 52.738110] xe 0000:00:02.0: [drm:drm_client_dev_hotplug] intel-fbdev: ret=0
<6>[ 52.773489] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<6>[ 52.776383] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])
<7>[ 52.776581] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7>[ 52.776950] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7>[ 52.787747] xe 0000:00:02.0: [drm:drm_client_dev_restore] intel-fbdev: ret=0
<7>[ 52.788286] [IGT] xe_module_load: finished subtest load, SUCCESS
<7>[ 52.788379] [IGT] xe_module_load: exiting, ret=0
<7>[ 52.814579] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000
<7>[ 52.814700] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:189:eDP-1] set backlight level = 13892
<7>[ 52.815822] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 52.815972] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 52.816067] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 52.816158] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 52.816247] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 52.816335] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 52.816422] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 52.816508] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 52.816589] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 52.816669] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 52.816748] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 52.816828] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 52.816930] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 52.817017] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 52.817100] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 52.817183] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 52.817264] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 52.817344] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 52.817424] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 52.817503] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 52.817581] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 52.817658] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 52.817735] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 52.817812] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 52.817930] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 52.818007] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 52.818083] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 52.818155] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 52.818224] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 52.818293] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 52.818363] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 52.818432] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 52.818500] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 52.818568] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 52.818637] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 52.818705] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 52.822922] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 52.823064] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 52.823164] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<6>[ 52.827939] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
<6>[ 52.829367] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
<6>[ 52.830609] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
<6>[ 52.831778] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
<7>[ 53.735044] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 53.735154] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 53.735284] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 54.072583] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 55.273268] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD off
<7>[ 55.273710] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067