<5>[ 0.000000] Linux version 6.14.0-rc4-xe+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Fri Feb 28 23:16:39 UTC 2025
<6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,snd_hda_intel,ast ro
<6>[ 0.000000] KERNEL supported cpus:
<6>[ 0.000000] Intel GenuineIntel
<6>[ 0.000000] AMD AuthenticAMD
<6>[ 0.000000] Hygon HygonGenuine
<6>[ 0.000000] Centaur CentaurHauls
<6>[ 0.000000] zhaoxin Shanghai
<6>[ 0.000000] x86/tme: not enabled by BIOS
<6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
<6>[ 0.000000] BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001053fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000105400000-0x000000087f7fffff] usable
<6>[ 0.000000] NX (Execute Disable) protection: active
<6>[ 0.000000] APIC: Static calls initialized
<6>[ 0.000000] efi: EFI v2.7 by Intel
<6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x68f86018 ESRT=0x68f97a98 MOKvar=0x6cd0c000
<6>[ 0.000000] efi: Remove mem282: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
<6>[ 0.000000] efi: Remove mem284: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved
<6>[ 0.000000] SMBIOS 3.8 present.
<6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3222.D97.2411281331 11/28/2024
<6>[ 0.000000] DMI: Memory slots populated: 8/8
<6>[ 0.000000] tsc: Detected 3100.000 MHz processor
<6>[ 0.000000] tsc: Detected 3110.400 MHz TSC
<7>[ 0.000009] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[ 0.000010] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[ 0.000014] last_pfn = 0x87f800 max_arch_pfn = 0x400000000
<6>[ 0.000018] MTRR map: 10 entries (3 fixed + 7 variable; max 23), built from 10 variable MTRRs
<6>[ 0.000020] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
<6>[ 0.000378] x2apic: enabled by BIOS, switching to x2apic ops
<6>[ 0.000379] last_pfn = 0x70000 max_arch_pfn = 0x400000000
<6>[ 0.004671] esrt: Reserving ESRT space from 0x0000000068f97a98 to 0x0000000068f97be8.
<7>[ 0.004679] e820: update [mem 0x68f97000-0x68f97fff] usable ==> reserved
<6>[ 0.004698] Using GB pages for direct mapping
<6>[ 0.005352] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes
<6>[ 0.005353] printk: early log buf free: 258912(98%)
<6>[ 0.005353] Secure boot disabled
<6>[ 0.005355] ACPI: Early table checksum verification disabled
<6>[ 0.005358] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL )
<6>[ 0.005360] ACPI: XSDT 0x000000006FF7C228 00019C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005364] ACPI: FACP 0x000000006FFAB000 000114 (v06 INTEL LNL 00000002 01000013)
<6>[ 0.005367] ACPI: DSDT 0x000000006FFB7000 025212 (v02 INTEL LNL 00000002 01000013)
<6>[ 0.005369] ACPI: FACS 0x000000006FEF1000 000040
<6>[ 0.005370] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930)
<6>[ 0.005372] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930)
<6>[ 0.005373] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930)
<6>[ 0.005374] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930)
<6>[ 0.005375] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930)
<6>[ 0.005377] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930)
<6>[ 0.005378] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930)
<6>[ 0.005379] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930)
<6>[ 0.005381] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930)
<6>[ 0.005382] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930)
<6>[ 0.005383] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000)
<6>[ 0.005385] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930)
<6>[ 0.005386] ACPI: SSDT 0x000000006FFE8000 002460 (v02 INTEL IgfxSsdt 00003000 INTL 20210930)
<6>[ 0.005387] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930)
<6>[ 0.005389] ACPI: SSDT 0x000000006FFDE000 008F36 (v02 INTEL TcssSsdt 00001000 INTL 20210930)
<6>[ 0.005390] ACPI: SSDT 0x000000006FFDD000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930)
<6>[ 0.005391] ACPI: SSDT 0x000000006FFB2000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930)
<6>[ 0.005392] ACPI: SSDT 0x000000006FFB0000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930)
<6>[ 0.005394] ACPI: SSDT 0x000000006FFAC000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930)
<6>[ 0.005395] ACPI: HPET 0x000000006FFAA000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005396] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005397] ACPI: APIC 0x000000006FFA8000 0000D8 (v06 INTEL LNL 00000000 01000013)
<6>[ 0.005399] ACPI: MCFG 0x000000006FFA7000 00003C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005400] ACPI: SSDT 0x000000006FFA6000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930)
<6>[ 0.005401] ACPI: SSDT 0x000000006FFA0000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930)
<6>[ 0.005402] ACPI: SSDT 0x000000006FF95000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930)
<6>[ 0.005404] ACPI: LPIT 0x000000006FF94000 0000CC (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005405] ACPI: SSDT 0x000000006FF93000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930)
<6>[ 0.005406] ACPI: SSDT 0x000000006FF92000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930)
<6>[ 0.005408] ACPI: DBGP 0x000000006FF91000 000034 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005409] ACPI: DBG2 0x000000006FF90000 000054 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.005410] ACPI: NHLT 0x000000006FF8F000 0002E3 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.005411] ACPI: SSDT 0x000000006FF8D000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930)
<6>[ 0.005413] ACPI: SSDT 0x000000006FF86000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930)
<6>[ 0.005414] ACPI: ECDT 0x000000006FF85000 000069 (v01 LNL 00000002 01000013)
<6>[ 0.005415] ACPI: DMAR 0x000000006FF84000 0000D8 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005416] ACPI: FPDT 0x000000006FF83000 000044 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005418] ACPI: SSDT 0x000000006FF82000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930)
<6>[ 0.005419] ACPI: SSDT 0x000000006FF80000 001122 (v02 SocGpe SocGpe 00003000 INTL 20210930)
<6>[ 0.005420] ACPI: SSDT 0x000000006FF7D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930)
<6>[ 0.005422] ACPI: SDEV 0x000000006FFA9000 000046 (v01 00000000 00000000)
<6>[ 0.005423] ACPI: SSDT 0x000000006FF71000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930)
<6>[ 0.005424] ACPI: SSDT 0x000000006FF63000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930)
<6>[ 0.005425] ACPI: ASF! 0x000000006FF62000 000074 (v32 INTEL LNL 00000002 01000013)
<6>[ 0.005427] ACPI: PHAT 0x000000006FF61000 0006E0 (v01 INTEL LNL 00000005 MSFT 0100000D)
<6>[ 0.005428] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005429] ACPI: Reserving FACP table memory at [mem 0x6ffab000-0x6ffab113]
<6>[ 0.005430] ACPI: Reserving DSDT table memory at [mem 0x6ffb7000-0x6ffdc211]
<6>[ 0.005431] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f]
<6>[ 0.005431] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387]
<6>[ 0.005431] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9]
<6>[ 0.005431] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa]
<6>[ 0.005432] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa]
<6>[ 0.005432] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393]
<6>[ 0.005432] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae]
<6>[ 0.005433] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f]
<6>[ 0.005433] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348]
<6>[ 0.005433] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba]
<6>[ 0.005433] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6]
<6>[ 0.005434] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f]
<6>[ 0.005434] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1]
<6>[ 0.005434] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea45f]
<6>[ 0.005435] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4]
<6>[ 0.005435] ACPI: Reserving SSDT table memory at [mem 0x6ffde000-0x6ffe6f35]
<6>[ 0.005435] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffdd0df]
<6>[ 0.005435] ACPI: Reserving SSDT table memory at [mem 0x6ffb2000-0x6ffb6ac2]
<6>[ 0.005436] ACPI: Reserving SSDT table memory at [mem 0x6ffb0000-0x6ffb140e]
<6>[ 0.005436] ACPI: Reserving SSDT table memory at [mem 0x6ffac000-0x6ffaf955]
<6>[ 0.005436] ACPI: Reserving HPET table memory at [mem 0x6ffaa000-0x6ffaa037]
<6>[ 0.005437] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027]
<6>[ 0.005437] ACPI: Reserving APIC table memory at [mem 0x6ffa8000-0x6ffa80d7]
<6>[ 0.005437] ACPI: Reserving MCFG table memory at [mem 0x6ffa7000-0x6ffa703b]
<6>[ 0.005438] ACPI: Reserving SSDT table memory at [mem 0x6ffa6000-0x6ffa66e2]
<6>[ 0.005438] ACPI: Reserving SSDT table memory at [mem 0x6ffa0000-0x6ffa5320]
<6>[ 0.005438] ACPI: Reserving SSDT table memory at [mem 0x6ff95000-0x6ff9f469]
<6>[ 0.005438] ACPI: Reserving LPIT table memory at [mem 0x6ff94000-0x6ff940cb]
<6>[ 0.005439] ACPI: Reserving SSDT table memory at [mem 0x6ff93000-0x6ff93d5b]
<6>[ 0.005439] ACPI: Reserving SSDT table memory at [mem 0x6ff92000-0x6ff921ef]
<6>[ 0.005439] ACPI: Reserving DBGP table memory at [mem 0x6ff91000-0x6ff91033]
<6>[ 0.005440] ACPI: Reserving DBG2 table memory at [mem 0x6ff90000-0x6ff90053]
<6>[ 0.005440] ACPI: Reserving NHLT table memory at [mem 0x6ff8f000-0x6ff8f2e2]
<6>[ 0.005440] ACPI: Reserving SSDT table memory at [mem 0x6ff8d000-0x6ff8e15b]
<6>[ 0.005440] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff8c53a]
<6>[ 0.005441] ACPI: Reserving ECDT table memory at [mem 0x6ff85000-0x6ff85068]
<6>[ 0.005441] ACPI: Reserving DMAR table memory at [mem 0x6ff84000-0x6ff840d7]
<6>[ 0.005441] ACPI: Reserving FPDT table memory at [mem 0x6ff83000-0x6ff83043]
<6>[ 0.005442] ACPI: Reserving SSDT table memory at [mem 0x6ff82000-0x6ff8286c]
<6>[ 0.005442] ACPI: Reserving SSDT table memory at [mem 0x6ff80000-0x6ff81121]
<6>[ 0.005442] ACPI: Reserving SSDT table memory at [mem 0x6ff7d000-0x6ff7f462]
<6>[ 0.005442] ACPI: Reserving SDEV table memory at [mem 0x6ffa9000-0x6ffa9045]
<6>[ 0.005443] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff7b4f9]
<6>[ 0.005443] ACPI: Reserving SSDT table memory at [mem 0x6ff63000-0x6ff70815]
<6>[ 0.005443] ACPI: Reserving ASF! table memory at [mem 0x6ff62000-0x6ff62073]
<6>[ 0.005444] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff616df]
<6>[ 0.005444] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037]
<6>[ 0.005507] APIC: Switched APIC routing to: cluster x2apic
<6>[ 0.005709] No NUMA configuration found
<6>[ 0.005710] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff]
<6>[ 0.005714] NODE_DATA(0) allocated [mem 0x87f352fc0-0x87f37dfff]
<6>[ 0.005824] Zone ranges:
<6>[ 0.005824] DMA [mem 0x0000000000001000-0x0000000000ffffff]
<6>[ 0.005825] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
<6>[ 0.005826] Normal [mem 0x0000000100000000-0x000000087f7fffff]
<6>[ 0.005827] Device empty
<6>[ 0.005827] Movable zone start for each node
<6>[ 0.005828] Early memory node ranges
<6>[ 0.005828] node 0: [mem 0x0000000000001000-0x000000000009efff]
<6>[ 0.005829] node 0: [mem 0x0000000000100000-0x000000006cac0fff]
<6>[ 0.005830] node 0: [mem 0x000000006ffff000-0x000000006fffffff]
<6>[ 0.005830] node 0: [mem 0x0000000105400000-0x000000087f7fffff]
<6>[ 0.005831] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff]
<6>[ 0.005836] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[ 0.005852] On node 0, zone DMA: 97 pages in unavailable ranges
<6>[ 0.007882] On node 0, zone DMA32: 13630 pages in unavailable ranges
<6>[ 0.036452] On node 0, zone Normal: 21504 pages in unavailable ranges
<6>[ 0.036516] On node 0, zone Normal: 2048 pages in unavailable ranges
<6>[ 0.036984] ACPI: PM-Timer IO Port: 0x1808
<6>[ 0.036990] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
<6>[ 0.037040] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
<6>[ 0.037042] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[ 0.037043] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>[ 0.037046] ACPI: Using ACPI (MADT) for SMP configuration information
<6>[ 0.037047] ACPI: HPET id: 0x8086a701 base: 0xfed00000
<7>[ 0.037061] e820: update [mem 0x68f42000-0x68f5cfff] usable ==> reserved
<6>[ 0.037067] TSC deadline timer available
<6>[ 0.037069] CPU topo: Max. logical packages: 1
<6>[ 0.037069] CPU topo: Max. logical dies: 1
<6>[ 0.037069] CPU topo: Max. dies per package: 1
<6>[ 0.037071] CPU topo: Max. threads per core: 1
<6>[ 0.037071] CPU topo: Num. cores per package: 8
<6>[ 0.037072] CPU topo: Num. threads per package: 8
<6>[ 0.037072] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
<6>[ 0.037084] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[ 0.037085] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
<6>[ 0.037086] PM: hibernation: Registered nosave memory: [mem 0x68f42000-0x68f5cfff]
<6>[ 0.037087] PM: hibernation: Registered nosave memory: [mem 0x68f97000-0x68f97fff]
<6>[ 0.037088] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fe67fff]
<6>[ 0.037088] PM: hibernation: Registered nosave memory: [mem 0x6fe68000-0x6ff4ffff]
<6>[ 0.037088] PM: hibernation: Registered nosave memory: [mem 0x6ff50000-0x6fffefff]
<6>[ 0.037089] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff]
<6>[ 0.037089] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff]
<6>[ 0.037090] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
<6>[ 0.037090] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
<6>[ 0.037090] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x1053fffff]
<6>[ 0.037092] [mem 0x80800000-0xfed1ffff] available for PCI devices
<6>[ 0.037093] Booting paravirtualized kernel on bare hardware
<6>[ 0.037095] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
<6>[ 0.037103] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
<6>[ 0.037432] percpu: Embedded 91 pages/cpu s249856 r8192 d114688 u524288
<7>[ 0.037436] pcpu-alloc: s249856 r8192 d114688 u524288 alloc=1*2097152
<7>[ 0.037437] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7
<5>[ 0.037450] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,snd_hda_intel,ast ro
<5>[ 0.037527] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space.
<5>[ 0.037541] random: crng init done
<6>[ 0.039389] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
<6>[ 0.040315] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
<6>[ 0.040371] Fallback order for Node 0: 0
<6>[ 0.040373] Built 1 zonelists, mobility grouping on. Total pages: 8285792
<6>[ 0.040374] Policy zone: Normal
<6>[ 0.040383] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
<6>[ 0.040384] stackdepot: allocating hash table via alloc_large_system_hash
<6>[ 0.040386] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear)
<6>[ 0.041323] software IO TLB: area num 8.
<4>[ 0.086847] **********************************************************
<4>[ 0.086848] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.086848] ** **
<4>[ 0.086849] ** This system shows unhashed kernel memory addresses **
<4>[ 0.086849] ** via the console, logs, and other interfaces. This **
<4>[ 0.086849] ** might reduce the security of your system. **
<4>[ 0.086849] ** **
<4>[ 0.086850] ** If you see this message and you are not debugging **
<4>[ 0.086850] ** the kernel, report this immediately to your system **
<4>[ 0.086850] ** administrator! **
<4>[ 0.086850] ** **
<4>[ 0.086850] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.086851] **********************************************************
<6>[ 0.087912] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
<6>[ 0.088231] ftrace: allocating 59524 entries in 233 pages
<6>[ 0.113696] ftrace: allocated 233 pages with 5 groups
<6>[ 0.114891] Dynamic Preempt: voluntary
<6>[ 0.115341] Running RCU self tests
<6>[ 0.115342] Running RCU synchronous self tests
<6>[ 0.115342] rcu: Preemptible hierarchical RCU implementation.
<6>[ 0.115343] rcu: RCU lockdep checking is enabled.
<6>[ 0.115343] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
<6>[ 0.115344] Trampoline variant of Tasks RCU enabled.
<6>[ 0.115344] Rude variant of Tasks RCU enabled.
<6>[ 0.115344] Tracing variant of Tasks RCU enabled.
<6>[ 0.115344] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
<6>[ 0.115345] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
<6>[ 0.115383] Running RCU synchronous self tests
<6>[ 0.115389] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.115392] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.115394] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.125472] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
<6>[ 0.125923] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[ 0.126266] Console: colour dummy device 80x25
<6>[ 0.126274] printk: legacy console [tty0] enabled
<6>[ 0.127469] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<6>[ 0.127477] ... MAX_LOCKDEP_SUBCLASSES: 8
<6>[ 0.127480] ... MAX_LOCK_DEPTH: 48
<6>[ 0.127484] ... MAX_LOCKDEP_KEYS: 8192
<6>[ 0.127487] ... CLASSHASH_SIZE: 4096
<6>[ 0.127491] ... MAX_LOCKDEP_ENTRIES: 524288
<6>[ 0.127495] ... MAX_LOCKDEP_CHAINS: 524288
<6>[ 0.127498] ... CHAINHASH_SIZE: 262144
<6>[ 0.127502] memory used by lock dependency info: 54145 kB
<6>[ 0.127506] memory used for stack traces: 4224 kB
<6>[ 0.127510] per task-struct memory footprint: 1920 bytes
<6>[ 0.127560] ACPI: Core revision 20240827
<6>[ 0.128469] hpet: HPET dysfunctional in PC10. Force disabled.
<6>[ 0.128534] APIC: Switch to symmetric I/O mode setup
<6>[ 0.128540] DMAR: Host address width 38
<6>[ 0.128543] DMAR: DRHD base: 0x000000fc800000 flags: 0x0
<6>[ 0.128576] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 0.128610] DMAR: DRHD base: 0x000000fc810000 flags: 0x0
<6>[ 0.128632] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 0.128657] DMAR: DRHD base: 0x000000fc820000 flags: 0x1
<6>[ 0.128678] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda
<6>[ 0.128711] DMAR: SATC flags: 0x1
<6>[ 0.128719] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2
<6>[ 0.128725] DMAR-IR: HPET id 0 under DRHD base 0xfc820000
<6>[ 0.128729] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>[ 0.130804] DMAR-IR: Enabled IRQ remapping in x2apic mode
<6>[ 0.135958] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 0.135976] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400)
<6>[ 0.136050] CPU0: Thermal monitoring enabled (TM1)
<6>[ 0.136057] x86/cpu: User Mode Instruction Prevention (UMIP) activated
<6>[ 0.136234] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
<6>[ 0.136239] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
<6>[ 0.136249] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
<6>[ 0.136257] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
<6>[ 0.136261] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
<6>[ 0.136268] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
<6>[ 0.136275] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
<6>[ 0.136290] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
<6>[ 0.136296] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
<6>[ 0.136301] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
<6>[ 0.136307] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
<6>[ 0.136313] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
<6>[ 0.136320] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
<6>[ 0.136326] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
<6>[ 0.136331] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
<6>[ 0.136337] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
<6>[ 0.136971] Freeing SMP alternatives memory: 48K
<6>[ 0.136971] pid_max: default: 32768 minimum: 301
<6>[ 0.136971] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm
<6>[ 0.136971] landlock: Up and running.
<6>[ 0.136971] Yama: becoming mindful.
<6>[ 0.136971] AppArmor: AppArmor initialized
<6>[ 0.136971] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.136971] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.136971] Running RCU synchronous self tests
<6>[ 0.136971] Running RCU synchronous self tests
<6>[ 0.136971] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1)
<6>[ 0.136971] Running RCU Tasks wait API self tests
<6>[ 0.136971] Running RCU Tasks Rude wait API self tests
<6>[ 0.136971] Running RCU Tasks Trace wait API self tests
<6>[ 0.136971] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
<6>[ 0.136971] core: cpu_core PMU driver:
<6>[ 0.136971] ... version: 6
<6>[ 0.136971] ... bit width: 48
<6>[ 0.136971] ... generic registers: 10
<6>[ 0.136971] ... value mask: 0000ffffffffffff
<6>[ 0.136971] ... max period: 00007fffffffffff
<6>[ 0.136971] ... fixed-purpose events: 4
<6>[ 0.136978] ... event mask: 0001000f000003ff
<6>[ 0.137010] signal: max sigframe size: 3632
<6>[ 0.137031] Estimated ratio of average max frequency by base frequency (times 1024): 1189
<6>[ 0.137115] rcu: Hierarchical SRCU implementation.
<6>[ 0.137119] rcu: Max phase no-delay instances is 400.
<6>[ 0.138040] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
<6>[ 0.139847] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
<6>[ 0.140118] smp: Bringing up secondary CPUs ...
<6>[ 0.140467] smpboot: x86: Booting SMP configuration:
<6>[ 0.140474] .... node #0, CPUs: #1 #2
<6>[ 0.143143] Callback from call_rcu_tasks_trace() invoked.
<4>[ 0.147435] #3 #4 #5 #6 #7
<6>[ 0.010862] core: cpu_atom PMU driver:
<6>[ 0.010862] ... version: 6
<6>[ 0.010862] ... bit width: 48
<6>[ 0.010862] ... generic registers: 8
<6>[ 0.010862] ... value mask: 0000ffffffffffff
<6>[ 0.010862] ... max period: 00007fffffffffff
<6>[ 0.010862] ... fixed-purpose events: 6
<6>[ 0.010862] ... event mask: 00000077000000ff
<6>[ 0.162029] smp: Brought up 1 node, 8 CPUs
<6>[ 0.162378] smpboot: Total of 8 processors activated (49766.40 BogoMIPS)
<6>[ 0.164111] Memory: 32344560K/33143168K available (24514K kernel code, 5579K rwdata, 9272K rodata, 5632K init, 68400K bss, 775240K reserved, 0K cma-reserved)
<6>[ 0.165101] devtmpfs: initialized
<6>[ 0.165225] x86/mm: Memory block size: 128MB
<6>[ 0.181074] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes)
<6>[ 0.181469] Running RCU synchronous self tests
<6>[ 0.181482] Running RCU synchronous self tests
<6>[ 0.181499] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[ 0.181499] futex hash table entries: 2048 (order: 6, 262144 bytes, linear)
<6>[ 0.182263] pinctrl core: initialized pinctrl subsystem
<6>[ 0.182760] PM: RTC time: 08:56:07, date: 2025-03-01
<6>[ 0.183655] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[ 0.184613] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
<6>[ 0.184903] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[ 0.185212] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[ 0.185271] audit: initializing netlink subsys (disabled)
<5>[ 0.185308] audit: type=2000 audit(1740819367.049:1): state=initialized audit_enabled=0 res=1
<6>[ 0.186318] thermal_sys: Registered thermal governor 'fair_share'
<6>[ 0.186320] thermal_sys: Registered thermal governor 'bang_bang'
<6>[ 0.186326] thermal_sys: Registered thermal governor 'step_wise'
<6>[ 0.186331] thermal_sys: Registered thermal governor 'user_space'
<6>[ 0.186336] thermal_sys: Registered thermal governor 'power_allocator'
<6>[ 0.186380] EISA bus registered
<6>[ 0.186407] cpuidle: using governor ladder
<6>[ 0.186407] cpuidle: using governor menu
<6>[ 0.186407] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[ 0.187190] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
<6>[ 0.187218] PCI: Using configuration type 1 for base access
<6>[ 0.187362] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
<6>[ 0.189028] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
<6>[ 0.189033] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
<6>[ 0.189037] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
<6>[ 0.189042] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
<6>[ 0.208972] raid6: avx2x4 gen() 77126 MB/s
<6>[ 0.225972] raid6: avx2x2 gen() 82958 MB/s
<6>[ 0.242972] raid6: avx2x1 gen() 74176 MB/s
<6>[ 0.242976] raid6: using algorithm avx2x2 gen() 82958 MB/s
<6>[ 0.259973] raid6: .... xor() 57694 MB/s, rmw enabled
<6>[ 0.259977] raid6: using avx2x2 recovery algorithm
<6>[ 0.263229] fbcon: Taking over console
<6>[ 0.264489] ACPI: Added _OSI(Module Device)
<6>[ 0.264543] ACPI: Added _OSI(Processor Device)
<6>[ 0.264589] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[ 0.264633] ACPI: Added _OSI(Processor Aggregator Device)
<6>[ 0.975019] ACPI: 31 ACPI AML tables successfully acquired and loaded
<6>[ 1.014839] ACPI: EC: EC started
<6>[ 1.014864] ACPI: EC: interrupt blocked
<6>[ 1.022849] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 1.022864] ACPI: EC: Boot ECDT EC used to handle transactions
<6>[ 1.130526] Callback from call_rcu_tasks() invoked.
<6>[ 1.318043] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.318068] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.373353] ACPI: Interpreter enabled
<6>[ 1.373449] ACPI: PM: (supports S0 S4 S5)
<6>[ 1.373453] ACPI: Using IOAPIC for interrupt routing
<6>[ 1.378594] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[ 1.378602] PCI: Ignoring E820 reservations for host bridge windows
<6>[ 1.398438] ACPI: Enabled 10 GPEs in block 00 to 7F
<6>[ 1.398488] ACPI: Enabled 13 GPEs in block 80 to DF
<6>[ 1.510146] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource
<6>[ 1.510981] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource
<6>[ 1.519769] ACPI: \_SB_.PC00.PAUD: New power resource
<6>[ 1.876561] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
<6>[ 1.899180] ACPI: \_SB_.PC00.RP02.PXP_: New power resource
<6>[ 2.052126] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource
<6>[ 2.054762] ACPI: \_SB_.PC00.RP04.PXP_: New power resource
<6>[ 2.064340] ACPI: \_SB_.PC00.RP05.PXP_: New power resource
<6>[ 2.073338] ACPI: \_SB_.PC00.TBT0: New power resource
<6>[ 2.073594] ACPI: \_SB_.PC00.TBT1: New power resource
<6>[ 2.073842] ACPI: \_SB_.PC00.D3C_: New power resource
<3>[ 2.128571] ACPI: \: Can't tag data node
<3>[ 2.129729] ACPI: \: Can't tag data node
<3>[ 2.130864] ACPI: \: Can't tag data node
<3>[ 2.131899] ACPI: \: Can't tag data node
<3>[ 2.133440] ACPI: \: Can't tag data node
<6>[ 2.283295] ACPI: \_TZ_.FN00: New power resource
<6>[ 2.284862] ACPI: \_TZ_.FN01: New power resource
<6>[ 2.286291] ACPI: \_TZ_.FN02: New power resource
<6>[ 2.287787] ACPI: \_TZ_.FN03: New power resource
<6>[ 2.287971] ACPI: \_TZ_.FN04: New power resource
<6>[ 2.292652] ACPI: \PIN_: New power resource
<6>[ 2.301818] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
<6>[ 2.301847] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
<6>[ 2.308159] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC]
<6>[ 2.320780] PCI host bridge to bus 0000:00
<6>[ 2.320814] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
<6>[ 2.320822] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
<6>[ 2.320828] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[ 2.320837] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window]
<6>[ 2.320844] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window]
<6>[ 2.320852] pci_bus 0000:00: root bus resource [bus 00-fe]
<6>[ 2.323924] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint
<6>[ 2.324502] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
<6>[ 2.324593] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref]
<6>[ 2.324601] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref]
<6>[ 2.324610] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref]
<6>[ 2.324654] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6>[ 2.325915] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint
<6>[ 2.325945] pci 0000:00:04.0: BAR 0 [mem 0x3815c00000-0x3815c1ffff 64bit]
<6>[ 2.327119] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint
<6>[ 2.327148] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit]
<6>[ 2.327156] pci 0000:00:05.0: BAR 4 [mem 0x3815c7b000-0x3815c7bfff 64bit]
<6>[ 2.328008] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port
<6>[ 2.328051] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 2.328063] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 2.328088] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 2.328567] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<6>[ 2.328629] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
<6>[ 2.332658] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port
<6>[ 2.332709] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 2.332721] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 2.332739] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 2.332870] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
<6>[ 2.332919] pci 0000:00:07.1: PTM enabled (root), 4ns granularity
<6>[ 2.337501] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port
<6>[ 2.337551] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 2.337563] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 2.337582] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 2.337704] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold
<6>[ 2.337752] pci 0000:00:07.2: PTM enabled (root), 4ns granularity
<6>[ 2.347524] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
<6>[ 2.347613] pci 0000:00:0a.0: BAR 0 [mem 0x3815c50000-0x3815c5ffff 64bit]
<6>[ 2.347649] pci 0000:00:0a.0: enabling Extended Tags
<6>[ 2.348165] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint
<6>[ 2.348237] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit]
<6>[ 2.348260] pci 0000:00:0b.0: BAR 4 [mem 0x3815c7a000-0x3815c7afff 64bit]
<6>[ 2.349385] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 2.349492] pci 0000:00:0d.0: BAR 0 [mem 0x3815c40000-0x3815c4ffff 64bit]
<6>[ 2.349641] pci 0000:00:0d.0: PME# supported from D3hot D3cold
<6>[ 2.354314] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 2.354420] pci 0000:00:0d.2: BAR 0 [mem 0x3815bc0000-0x3815bfffff 64bit]
<6>[ 2.354441] pci 0000:00:0d.2: BAR 2 [mem 0x3815c79000-0x3815c79fff 64bit]
<6>[ 2.354568] pci 0000:00:0d.2: supports D1 D2
<6>[ 2.354579] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.358057] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 2.358162] pci 0000:00:0d.3: BAR 0 [mem 0x3815b80000-0x3815bbffff 64bit]
<6>[ 2.358182] pci 0000:00:0d.3: BAR 2 [mem 0x3815c78000-0x3815c78fff 64bit]
<6>[ 2.358306] pci 0000:00:0d.3: supports D1 D2
<6>[ 2.358317] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.361243] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint
<6>[ 2.361364] pci 0000:00:12.0: BAR 0 [mem 0x3815c30000-0x3815c3ffff 64bit]
<6>[ 2.361502] pci 0000:00:12.0: PME# supported from D0 D3hot
<6>[ 2.371053] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint
<6>[ 2.371233] pci 0000:00:13.0: BAR 0 [mem 0x3815c77000-0x3815c77fff 64bit]
<6>[ 2.371438] pci 0000:00:13.0: PME# supported from D3hot
<6>[ 2.371971] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 2.371971] pci 0000:00:14.0: BAR 0 [mem 0x3815c20000-0x3815c2ffff 64bit]
<6>[ 2.371971] pci 0000:00:14.0: PME# supported from D3hot D3cold
<6>[ 2.378204] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint
<6>[ 2.378320] pci 0000:00:14.2: BAR 0 [mem 0x3815c68000-0x3815c6ffff 64bit]
<6>[ 2.378342] pci 0000:00:14.2: BAR 2 [mem 0x3815c76000-0x3815c76fff 64bit]
<6>[ 2.378960] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.379233] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.383773] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.384982] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.388089] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.388981] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.392392] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.392669] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.396310] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint
<6>[ 2.396493] pci 0000:00:16.0: BAR 0 [mem 0x3815c71000-0x3815c71fff 64bit]
<6>[ 2.396692] pci 0000:00:16.0: PME# supported from D3hot
<6>[ 2.403607] pci 0000:00:16.3: [8086:a873] type 00 class 0x070002 conventional PCI endpoint
<6>[ 2.403730] pci 0000:00:16.3: BAR 0 [io 0x4020-0x4027]
<6>[ 2.403746] pci 0000:00:16.3: BAR 1 [mem 0x94421000-0x94421fff]
<6>[ 2.404346] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port
<6>[ 2.404416] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 2.404435] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 2.404453] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 2.404691] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>[ 2.404787] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
<6>[ 2.418198] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port
<6>[ 2.418338] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 2.418393] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 2.418920] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
<6>[ 2.419766] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
<6>[ 2.433982] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint
<6>[ 2.438418] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint
<6>[ 2.438653] pci 0000:00:1f.3: BAR 0 [mem 0x3815b00000-0x3815b7ffff 64bit]
<6>[ 2.438690] pci 0000:00:1f.3: BAR 4 [mem 0x3815800000-0x38159fffff 64bit]
<6>[ 2.438925] pci 0000:00:1f.3: PME# supported from D3hot D3cold
<6>[ 2.440484] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint
<6>[ 2.440659] pci 0000:00:1f.4: BAR 0 [mem 0x3815c70000-0x3815c700ff 64bit]
<6>[ 2.440688] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf]
<6>[ 2.444162] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.444473] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
<6>[ 2.444993] pci 0000:00:1f.6: [8086:550e] type 00 class 0x020000 conventional PCI endpoint
<6>[ 2.445108] pci 0000:00:1f.6: BAR 0 [mem 0x94400000-0x9441ffff]
<6>[ 2.445241] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
<6>[ 2.448806] pci 0000:00:1f.7: [8086:a824] type 00 class 0x130000 conventional PCI endpoint
<6>[ 2.448915] pci 0000:00:1f.7: BAR 0 [mem 0x3815a00000-0x3815afffff 64bit]
<6>[ 2.448935] pci 0000:00:1f.7: BAR 2 [mem 0x3815000000-0x38157fffff 64bit]
<6>[ 2.448955] pci 0000:00:1f.7: BAR 4 [mem 0x3815c60000-0x3815c67fff 64bit]
<6>[ 2.449701] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 2.450076] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 2.450442] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 2.450862] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint
<6>[ 2.451049] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff]
<6>[ 2.451071] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit]
<6>[ 2.451092] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit]
<6>[ 2.451480] pci 0000:7f:00.0: supports D1 D2
<6>[ 2.451491] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.452740] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 2.454122] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 2.454854] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint
<6>[ 2.454957] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit]
<6>[ 2.456423] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 2.456545] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 2.947231] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1)
<6>[ 14.257136] Low-power S0 idle used by default for system suspend
<6>[ 14.309491] ACPI: EC: interrupt unblocked
<6>[ 14.309501] ACPI: EC: event unblocked
<6>[ 14.309536] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 14.309542] ACPI: EC: GPE=0x6e
<6>[ 14.309549] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete
<6>[ 14.309558] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
<6>[ 14.310377] iommu: Default domain type: Translated
<6>[ 14.310377] iommu: DMA domain TLB invalidation policy: lazy mode
<5>[ 14.314035] SCSI subsystem initialized
<7>[ 14.315103] libata version 3.00 loaded.
<6>[ 14.315103] ACPI: bus type USB registered
<6>[ 14.315810] usbcore: registered new interface driver usbfs
<6>[ 14.316173] usbcore: registered new interface driver hub
<6>[ 14.316600] usbcore: registered new device driver usb
<6>[ 14.317833] pps_core: LinuxPPS API ver. 1 registered
<6>[ 14.317881] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[ 14.318087] PTP clock support registered
<6>[ 14.319368] EDAC MC: Ver: 3.0.0
<6>[ 14.322375] efivars: Registered efivars operations
<6>[ 14.325227] NetLabel: Initializing
<6>[ 14.325235] NetLabel: domain hash size = 128
<6>[ 14.325239] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
<6>[ 14.325309] NetLabel: unlabeled traffic allowed by default
<6>[ 14.325328] mctp: management component transport protocol core
<6>[ 14.325334] NET: Registered PF_MCTP protocol family
<6>[ 14.325379] PCI: Using ACPI for IRQ routing
<7>[ 14.344675] PCI: pci_cache_line_size set to 64 bytes
<6>[ 14.344954] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
<7>[ 14.345084] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
<7>[ 14.345093] e820: reserve RAM buffer [mem 0x68f42000-0x6bffffff]
<7>[ 14.345096] e820: reserve RAM buffer [mem 0x68f97000-0x6bffffff]
<7>[ 14.345099] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff]
<7>[ 14.345101] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff]
<6>[ 14.346008] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6>[ 14.346020] pci 0000:00:02.0: vgaarb: bridge control possible
<6>[ 14.346025] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
<6>[ 14.346040] vgaarb: loaded
<6>[ 14.347120] clocksource: Switched to clocksource tsc-early
<5>[ 14.366261] VFS: Disk quotas dquot_6.6.0
<6>[ 14.366318] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[ 14.368644] AppArmor: AppArmor Filesystem Enabled
<6>[ 14.369034] pnp: PnP ACPI init
<6>[ 14.371112] system 00:00: [io 0x0680-0x069f] has been reserved
<6>[ 14.371142] system 00:00: [io 0x164e-0x164f] has been reserved
<6>[ 14.374706] system 00:02: [io 0x06a4] has been reserved
<6>[ 14.374729] system 00:02: [io 0x06a0] has been reserved
<6>[ 14.433255] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
<6>[ 14.433290] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved
<6>[ 14.433321] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved
<6>[ 14.433344] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved
<6>[ 14.433367] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved
<6>[ 14.433393] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved
<6>[ 14.433420] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
<6>[ 14.433442] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
<6>[ 14.442778] system 00:04: [io 0x2000-0x20fe] has been reserved
<6>[ 14.449763] system 00:06: [io 0x1854-0x1857] has been reserved
<6>[ 14.450243] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved
<6>[ 14.465328] pnp: PnP ACPI: found 8 devices
<6>[ 14.480626] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<6>[ 14.481031] NET: Registered PF_INET protocol family
<6>[ 14.481314] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 14.485157] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear)
<6>[ 14.485459] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[ 14.485743] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 14.486806] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage)
<6>[ 14.488913] TCP: Hash tables configured (established 262144 bind 65536)
<6>[ 14.489569] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 14.491288] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 14.493029] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[ 14.493149] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000
<6>[ 14.493170] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000
<6>[ 14.493185] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000
<6>[ 14.493259] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]: assigned
<6>[ 14.493270] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff]: assigned
<6>[ 14.493279] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff]: assigned
<6>[ 14.493291] pci 0000:00:15.0: BAR 0 [mem 0x3815c72000-0x3815c72fff 64bit]: assigned
<6>[ 14.493345] pci 0000:00:15.1: BAR 0 [mem 0x3815c73000-0x3815c73fff 64bit]: assigned
<6>[ 14.493401] pci 0000:00:15.2: BAR 0 [mem 0x3815c74000-0x3815c74fff 64bit]: assigned
<6>[ 14.493456] pci 0000:00:15.3: BAR 0 [mem 0x3815c75000-0x3815c75fff 64bit]: assigned
<6>[ 14.493510] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned
<6>[ 14.493555] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 14.493569] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]
<6>[ 14.493581] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 14.493592] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 14.493608] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 14.493619] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff]
<6>[ 14.493631] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 14.493642] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 14.493658] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 14.493667] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff]
<6>[ 14.493679] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 14.493690] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 14.493706] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 14.493715] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 14.493726] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 14.493740] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 14.493780] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 14.493826] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
<6>[ 14.493834] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
<6>[ 14.493843] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[ 14.493852] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window]
<6>[ 14.493861] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window]
<6>[ 14.493878] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
<6>[ 14.493886] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff]
<6>[ 14.493894] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 14.493904] pci_bus 0000:2b: resource 0 [io 0x6000-0x6fff]
<6>[ 14.493912] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff]
<6>[ 14.493920] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 14.493930] pci_bus 0000:55: resource 0 [io 0x7000-0x7fff]
<6>[ 14.493938] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff]
<6>[ 14.493946] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 14.493956] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff]
<6>[ 14.493964] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff]
<6>[ 14.493972] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff]
<6>[ 14.495434] pci 0000:00:0d.0: enabling device (0000 -> 0002)
<6>[ 14.497679] PCI: CLS 0 bytes, default 64
<6>[ 14.497824] DMAR: No RMRR found
<6>[ 14.497839] DMAR: No ATSR found
<6>[ 14.497845] DMAR: dmar1: Using Queued invalidation
<6>[ 14.497875] DMAR: dmar0: Using Queued invalidation
<6>[ 14.497887] DMAR: dmar2: Using Queued invalidation
<6>[ 14.499070] pci 0000:00:04.0: Adding to iommu group 0
<6>[ 14.499179] pci 0000:00:05.0: Adding to iommu group 1
<6>[ 14.499271] pci 0000:00:0a.0: Adding to iommu group 2
<6>[ 14.499352] pci 0000:00:0b.0: Adding to iommu group 3
<6>[ 14.503652] pci 0000:00:02.0: Adding to iommu group 4
<6>[ 14.505170] pci 0000:00:00.0: Adding to iommu group 5
<6>[ 14.505261] pci 0000:00:07.0: Adding to iommu group 6
<6>[ 14.505345] pci 0000:00:07.1: Adding to iommu group 7
<6>[ 14.505431] pci 0000:00:07.2: Adding to iommu group 8
<6>[ 14.505540] pci 0000:00:0d.0: Adding to iommu group 9
<6>[ 14.505601] pci 0000:00:0d.2: Adding to iommu group 9
<6>[ 14.505655] pci 0000:00:0d.3: Adding to iommu group 9
<6>[ 14.505741] pci 0000:00:12.0: Adding to iommu group 10
<6>[ 14.505823] pci 0000:00:13.0: Adding to iommu group 11
<6>[ 14.505949] pci 0000:00:14.0: Adding to iommu group 12
<6>[ 14.506006] pci 0000:00:14.2: Adding to iommu group 12
<6>[ 14.506129] pci 0000:00:15.0: Adding to iommu group 13
<6>[ 14.506188] pci 0000:00:15.1: Adding to iommu group 13
<6>[ 14.506250] pci 0000:00:15.2: Adding to iommu group 13
<6>[ 14.506306] pci 0000:00:15.3: Adding to iommu group 13
<6>[ 14.506411] pci 0000:00:16.0: Adding to iommu group 14
<6>[ 14.506471] pci 0000:00:16.3: Adding to iommu group 14
<6>[ 14.506549] pci 0000:00:1c.0: Adding to iommu group 15
<6>[ 14.506649] pci 0000:00:1c.4: Adding to iommu group 16
<6>[ 14.506798] pci 0000:00:1f.0: Adding to iommu group 17
<6>[ 14.506857] pci 0000:00:1f.3: Adding to iommu group 17
<6>[ 14.506922] pci 0000:00:1f.4: Adding to iommu group 17
<6>[ 14.506981] pci 0000:00:1f.5: Adding to iommu group 17
<6>[ 14.507039] pci 0000:00:1f.6: Adding to iommu group 17
<6>[ 14.507099] pci 0000:00:1f.7: Adding to iommu group 17
<6>[ 14.507177] pci 0000:7f:00.0: Adding to iommu group 18
<6>[ 14.507281] pci 0000:80:00.0: Adding to iommu group 19
<6>[ 14.521245] DMAR: Intel(R) Virtualization Technology for Directed I/O
<6>[ 14.521264] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[ 14.521273] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB)
<6>[ 14.529180] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 14.529297] clocksource: Switched to clocksource tsc
<6>[ 14.529450] platform rtc_cmos: registered platform RTC device (no PNP device found)
<5>[ 14.534671] Initialise system trusted keyrings
<5>[ 14.534761] Key type blacklist registered
<6>[ 14.535071] workingset: timestamp_bits=36 max_order=23 bucket_order=0
<6>[ 14.545125] zbud: loaded
<6>[ 14.546632] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 14.546775] ntfs3: Enabled Linux POSIX ACLs support
<6>[ 14.546782] ntfs3: Read-only LZX/Xpress compression included
<5>[ 14.547306] integrity: Platform Keyring initialized
<5>[ 14.547330] integrity: Machine keyring initialized
<6>[ 14.553663] xor: automatically using best checksumming function avx
<5>[ 14.553675] Key type asymmetric registered
<5>[ 14.553688] Asymmetric key parser 'x509' registered
<6>[ 14.553828] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
<6>[ 14.554178] io scheduler mq-deadline registered
<6>[ 14.555257] ledtrig-cpu: registered to indicate activity on CPUs
<6>[ 14.557010] pcieport 0000:00:07.0: PME: Signaling with IRQ 126
<6>[ 14.557400] pcieport 0000:00:07.0: AER: enabled with IRQ 126
<6>[ 14.558631] pcieport 0000:00:07.1: PME: Signaling with IRQ 127
<6>[ 14.558975] pcieport 0000:00:07.1: AER: enabled with IRQ 127
<6>[ 14.560167] pcieport 0000:00:07.2: PME: Signaling with IRQ 128
<6>[ 14.560471] pcieport 0000:00:07.2: AER: enabled with IRQ 128
<6>[ 14.561554] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129
<6>[ 14.561840] pcieport 0000:00:1c.0: AER: enabled with IRQ 129
<6>[ 14.563376] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130
<6>[ 14.563719] pcieport 0000:00:1c.4: AER: enabled with IRQ 130
<6>[ 14.564325] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<7>[ 14.567173] Monitor-Mwait will be used to enter C-1 state
<7>[ 14.567297] Monitor-Mwait will be used to enter C-2 state
<7>[ 14.567347] Monitor-Mwait will be used to enter C-3 state
<6>[ 14.579593] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0
<6>[ 14.579803] ACPI: button: Lid Switch [LID0]
<6>[ 14.580072] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
<6>[ 14.580253] ACPI: button: Sleep Button [SLPB]
<6>[ 14.580458] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
<6>[ 14.580895] ACPI: button: Power Button [PWRB]
<4>[ 14.590687] ACPI Warning: \_SB.PR00._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 14.599628] ACPI Warning: \_SB.PR01._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 14.611142] ACPI Warning: \_SB.PR02._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 14.623665] ACPI Warning: \_SB.PR03._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 14.636697] ACPI Warning: \_SB.PR04._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 14.644302] ACPI Warning: \_SB.PR05._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 14.652124] ACPI Warning: \_SB.PR06._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 14.659383] ACPI Warning: \_SB.PR07._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<6>[ 14.728411] thermal LNXTHERM:00: registered as thermal_zone0
<6>[ 14.728428] ACPI: thermal: Thermal Zone [TZ00] (50 C)
<6>[ 14.729492] ACPI: battery: Slot [BAT1] (battery absent)
<6>[ 14.730030] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[ 14.730734] ACPI: battery: Slot [BAT0] (battery present)
<6>[ 14.752945] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
<6>[ 14.766287] serial 0000:00:12.0: enabling device (0000 -> 0002)
<6>[ 14.768011] serial 0000:00:16.3: enabling device (0001 -> 0003)
<6>[ 14.790740] 0000:00:16.3: ttyS4 at I/O 0x4020 (irq = 19, base_baud = 115200) is a 16550A
<4>[ 14.793312] hpet_acpi_add: no address or irqs in _CRS
<6>[ 14.793513] Linux agpgart interface v0.103
<6>[ 14.794190] ACPI: bus type drm_connector registered
<6>[ 14.814348] loop: module loaded
<6>[ 14.857939] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
<6>[ 15.049087] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
<6>[ 15.224888] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
<6>[ 15.352947] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
<5>[ 15.472871] Key type psk registered
<6>[ 15.475043] nvme 0000:80:00.0: platform quirk: setting simple suspend
<6>[ 15.475873] tun: Universal TUN/TAP device driver, 1.6
<6>[ 15.475988] nvme nvme0: pci function 0000:80:00.0
<6>[ 15.476645] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 15.476740] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
<6>[ 15.478652] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 15.480684] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 15.480710] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
<6>[ 15.480729] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 15.481095] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 15.481119] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 15.481129] usb usb1: Product: xHCI Host Controller
<6>[ 15.481137] usb usb1: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[ 15.481146] usb usb1: SerialNumber: 0000:00:0d.0
<6>[ 15.482112] hub 1-0:1.0: USB hub found
<6>[ 15.482204] hub 1-0:1.0: 1 port detected
<6>[ 15.487008] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 15.487029] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 15.487040] usb usb2: Product: xHCI Host Controller
<6>[ 15.487048] usb usb2: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[ 15.487057] usb usb2: SerialNumber: 0000:00:0d.0
<6>[ 15.487757] hub 2-0:1.0: USB hub found
<6>[ 15.487802] hub 2-0:1.0: 3 ports detected
<6>[ 15.511007] nvme nvme0: 8/0/0 default/read/poll queues
<6>[ 15.511961] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 15.512014] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
<6>[ 15.513860] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 15.515595] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 15.515622] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
<6>[ 15.515642] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 15.515925] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 15.515940] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 15.515951] usb usb3: Product: xHCI Host Controller
<6>[ 15.515958] usb usb3: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[ 15.515966] usb usb3: SerialNumber: 0000:00:14.0
<6>[ 15.516649] hub 3-0:1.0: USB hub found
<6>[ 15.516702] hub 3-0:1.0: 8 ports detected
<6>[ 15.520112] nvme0n1: p1 p2
<6>[ 15.545859] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 15.545882] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 15.545892] usb usb4: Product: xHCI Host Controller
<6>[ 15.545900] usb usb4: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[ 15.545908] usb usb4: SerialNumber: 0000:00:14.0
<6>[ 15.546512] hub 4-0:1.0: USB hub found
<6>[ 15.546555] hub 4-0:1.0: 2 ports detected
<6>[ 15.554043] usbcore: registered new interface driver usb-storage
<6>[ 15.554182] usbcore: registered new interface driver usbserial_generic
<6>[ 15.554278] usbserial: USB Serial support registered for generic
<6>[ 15.554330] usbcore: registered new interface driver ftdi_sio
<6>[ 15.554363] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[ 15.554412] usbcore: registered new interface driver pl2303
<6>[ 15.554445] usbserial: USB Serial support registered for pl2303
<6>[ 15.554564] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>[ 15.554574] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<3>[ 16.263706] i8042: Can't read CTR while initializing i8042
<3>[ 16.263718] i8042 i8042: probe with driver i8042 failed with error -5
<6>[ 16.264251] mousedev: PS/2 mouse device common for all mice
<6>[ 16.265745] rtc_cmos rtc_cmos: RTC can wake from S4
<6>[ 16.267601] rtc_cmos rtc_cmos: registered as rtc0
<6>[ 16.267827] rtc_cmos rtc_cmos: setting system clock to 2025-03-01T08:56:23 UTC (1740819383)
<6>[ 16.268001] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
<6>[ 16.268059] i2c_dev: i2c /dev entries driver
<6>[ 16.271563] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0)
<6>[ 16.271579] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
<4>[ 16.271589] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
<6>[ 16.271636] device-mapper: uevent: version 1.0.3
<6>[ 16.271985] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
<6>[ 16.272130] platform eisa.0: Probing EISA bus 0
<4>[ 16.272143] platform eisa.0: EISA: Cannot allocate resource for mainboard
<4>[ 16.272158] platform eisa.0: Cannot allocate resource for EISA slot 1
<4>[ 16.272170] platform eisa.0: Cannot allocate resource for EISA slot 2
<4>[ 16.272182] platform eisa.0: Cannot allocate resource for EISA slot 3
<4>[ 16.272194] platform eisa.0: Cannot allocate resource for EISA slot 4
<4>[ 16.272206] platform eisa.0: Cannot allocate resource for EISA slot 5
<4>[ 16.272217] platform eisa.0: Cannot allocate resource for EISA slot 6
<4>[ 16.272229] platform eisa.0: Cannot allocate resource for EISA slot 7
<4>[ 16.272240] platform eisa.0: Cannot allocate resource for EISA slot 8
<6>[ 16.272250] platform eisa.0: EISA: Detected 0 cards
<6>[ 16.272260] intel_pstate: Intel P-state driver initializing
<6>[ 16.276294] Hybrid CPU capacity scaling enabled
<6>[ 16.277717] intel_pstate: HWP enabled
<6>[ 16.277727] sdhci: Secure Digital Host Controller Interface driver
<6>[ 16.277735] sdhci: Copyright(c) Pierre Ossman
<6>[ 16.277895] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 16.280453] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c]
<6>[ 16.281498] drop_monitor: Initializing network drop monitor service
<6>[ 16.281783] NET: Registered PF_INET6 protocol family
<6>[ 16.284830] Segment Routing with IPv6
<6>[ 16.284888] In-situ OAM (IOAM) with IPv6
<6>[ 16.284942] NET: Registered PF_PACKET protocol family
<5>[ 16.285146] Key type dns_resolver registered
<4>[ 16.289175] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<6>[ 16.289754] microcode: Current revision: 0x0000011b
<6>[ 16.290514] IPI shorthand broadcast: enabled
<6>[ 16.308365] sched_clock: Marking stable (16298001360, 9862161)->(16418483421, -110619900)
<6>[ 16.309124] registered taskstats version 1
<5>[ 16.310282] Loading compiled-in X.509 certificates
<6>[ 16.337619] Demotion targets for Node 0: null
<6>[ 16.337811] kmemleak: Kernel memory leak detector initialized (mem pool available: 14949)
<6>[ 16.337814] kmemleak: Automatic memory scanning thread started
<5>[ 16.338054] Key type .fscrypt registered
<5>[ 16.338060] Key type fscrypt-provisioning registered
<6>[ 16.340637] Btrfs loaded, zoned=yes, fsverity=yes
<5>[ 16.342548] Key type encrypted registered
<6>[ 16.342558] AppArmor: AppArmor sha256 policy hashing enabled
<6>[ 16.342777] ima: No TPM chip found, activating TPM-bypass!
<5>[ 16.342795] Loading compiled-in module X.509 certificates
<5>[ 16.343600] Loaded X.509 cert 'Build time autogenerated kernel key: e5e5d2aa284e553f7ecc668c5a38b08a52a80990'
<6>[ 16.343616] ima: Allocated hash algorithm: sha256
<6>[ 16.343665] ima: No architecture policies found
<6>[ 16.343764] evm: Initialising EVM extended attributes:
<6>[ 16.343769] evm: security.selinux
<6>[ 16.343772] evm: security.SMACK64
<6>[ 16.343775] evm: security.SMACK64EXEC
<6>[ 16.343778] evm: security.SMACK64TRANSMUTE
<6>[ 16.343782] evm: security.SMACK64MMAP
<6>[ 16.343785] evm: security.apparmor
<6>[ 16.343788] evm: security.ima
<6>[ 16.343791] evm: security.capability
<6>[ 16.343794] evm: HMAC attrs: 0x1
<6>[ 16.345716] PM: Magic number: 1:792:926
<6>[ 16.345930] printk: legacy console [netcon0] enabled
<6>[ 16.345937] netconsole: network logging started
<6>[ 16.346553] RAS: Correctable Errors collector initialized.
<6>[ 16.347055] clk: Disabling unused clocks
<6>[ 16.347067] PM: genpd: Disabling unused power domains
<6>[ 16.347502] md: Waiting for all devices to be available before autodetect
<6>[ 16.347509] md: If you don't use raid, use raid=noautodetect
<6>[ 16.347515] md: Autodetecting RAID arrays.
<6>[ 16.347524] md: autorun ...
<6>[ 16.347528] md: ... autorun DONE.
<6>[ 16.392760] EXT4-fs (nvme0n1p2): mounted filesystem d94563f3-71a5-4472-983a-b9d25270145b ro with ordered data mode. Quota mode: none.
<6>[ 16.392820] VFS: Mounted root (ext4 filesystem) readonly on device 259:2.
<6>[ 16.393906] devtmpfs: mounted
<6>[ 16.405177] Freeing unused decrypted memory: 2028K
<6>[ 16.406054] Freeing unused kernel image (initmem) memory: 5632K
<6>[ 16.406078] Write protecting the kernel read-only data: 34816k
<6>[ 16.406570] Freeing unused kernel image (text/rodata gap) memory: 60K
<6>[ 16.406913] Freeing unused kernel image (rodata/data gap) memory: 968K
<6>[ 16.411305] x86/mm: Checked W+X mappings: passed, no W+X pages found.
<6>[ 16.411329] Run /sbin/init as init process
<7>[ 16.411333] with arguments:
<7>[ 16.411334] /sbin/init
<7>[ 16.411335] with environment:
<7>[ 16.411336] HOME=/
<7>[ 16.411336] TERM=linux
<7>[ 16.411337] BOOT_IMAGE=/boot/drm_intel
<7>[ 16.475627] systemd[1]: Inserted module 'autofs4'
<7>[ 16.493363] systemd[1]: systemd 255.4-1ubuntu8.5 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
<7>[ 16.493405] systemd[1]: Detected architecture x86-64.
<7>[ 16.494694] systemd[1]: Hostname set to <shard-lnl-6>.
<7>[ 16.782768] systemd[1]: Queued start job for default target graphical.target.
<7>[ 16.820506] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
<7>[ 16.822292] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
<7>[ 16.823506] systemd[1]: Created slice user.slice - User and Session Slice.
<7>[ 16.823732] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
<7>[ 16.824341] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
<7>[ 16.824450] systemd[1]: Expecting device dev-disk-by\x2duuid-BBCC\x2dD8CD.device - /dev/disk/by-uuid/BBCC-D8CD...
<7>[ 16.824541] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
<7>[ 16.824621] systemd[1]: Reached target slices.target - Slice Units.
<7>[ 16.824687] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
<7>[ 16.824748] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
<7>[ 16.824814] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
<7>[ 16.825065] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
<7>[ 16.825419] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
<7>[ 16.825680] systemd[1]: Listening on multipathd.socket - multipathd control socket.
<7>[ 16.826020] systemd[1]: Listening on syslog.socket - Syslog Socket.
<7>[ 16.826266] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
<7>[ 16.826460] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
<7>[ 16.826723] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
<7>[ 16.827023] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
<7>[ 16.827283] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
<7>[ 16.827451] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 16.827716] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
<7>[ 16.827962] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
<7>[ 16.831098] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
<7>[ 16.833655] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
<7>[ 16.836286] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
<7>[ 16.838874] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
<7>[ 16.844868] systemd[1]: Starting systemd-journald.service - Journal Service...
<7>[ 16.848201] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
<7>[ 16.852020] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
<7>[ 16.855192] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
<7>[ 16.858758] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
<7>[ 16.861722] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
<7>[ 16.866044] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
<7>[ 16.871893] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
<7>[ 16.876164] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
<7>[ 16.879742] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
<7>[ 16.880544] systemd-journald[210]: Collecting audit messages is disabled.
<7>[ 16.882703] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
<7>[ 16.883500] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
<7>[ 16.887629] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
<7>[ 16.893547] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
<7>[ 16.893743] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 16.893814] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<6>[ 16.898462] pstore: Using crash dump compression: deflate
<7>[ 16.899584] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
<6>[ 16.905904] fuse: init (API version 7.42)
<7>[ 16.906979] systemd[1]: Started systemd-journald.service - Journal Service.
<6>[ 16.907534] pstore: Registered efi_pstore as persistent store backend
<6>[ 17.064212] EXT4-fs (nvme0n1p2): re-mounted d94563f3-71a5-4472-983a-b9d25270145b r/w. Quota mode: none.
<6>[ 17.096515] Adding 8388604k swap on /swap.img. Priority:-2 extents:66 across:306577408k SS
<7>[ 17.108672] systemd-journald[210]: Received client request to flush runtime journal.
<7>[ 17.127670] systemd-journald[210]: /var/log/journal/969c3e4a3b0c44bb886902ddd4fce94a/system.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 17.127690] systemd-journald[210]: Rotating system journal.
<4>[ 17.771401] nvme nvme0: using unchecked data buffer
<4>[ 17.928862] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.928899] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.928923] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.928948] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.928973] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.928997] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.929022] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.929046] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.929071] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.929096] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.929120] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.929145] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.929169] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.929194] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.929219] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.929243] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.929268] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.929296] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.929317] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.929341] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.929366] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.929391] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.929415] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.929440] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.929464] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.929493] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.929513] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.929556] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.929576] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.929601] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.929626] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.929650] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.929686] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.929709] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.929734] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.929758] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.929783] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.929807] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<6>[ 17.934862] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002)
<4>[ 17.945203] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.945227] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.945252] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.945276] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.945301] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.945325] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.945362] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.945386] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.945616] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.945686] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.945721] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.945769] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.946009] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.946032] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.946057] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.946093] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.946129] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.946154] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.946179] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.946203] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.946227] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.946252] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.946276] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.946301] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.946326] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.946350] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.946375] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.946399] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.946424] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.946449] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<6>[ 17.968851] input: Intel HID events as /devices/platform/INTC107B:00/input/input3
<6>[ 17.972104] intel-hid INTC107B:00: platform supports 5 button array
<6>[ 17.972399] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4
<4>[ 17.973444] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.973463] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.973483] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.973503] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.973523] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.973543] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.973563] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.973680] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.973699] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.973719] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.973739] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.973759] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.973779] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.973799] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.973819] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.973839] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.973859] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.973919] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.973985] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.974005] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.974025] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.974045] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.974125] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.974145] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.974165] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.974222] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.974241] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.974261] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.974281] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.974313] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.974333] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.974353] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.974373] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.974393] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.974413] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.974433] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.974453] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.974473] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 17.974493] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.015807] gpio gpiochip3: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.015832] gpio gpiochip3: gpiochip_add_data_with_key: get_direction failed: -22
<6>[ 18.020110] pci 0000:00:05.0: Setting to D3hot
<6>[ 18.036938] pci 0000:00:0b.0: Setting to D3hot
<4>[ 18.048957] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform
<6>[ 18.049210] intel_pmc_core INT33A1:00: initialized
<4>[ 18.060462] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.060498] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.060517] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.060537] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.060557] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.060577] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.060597] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.060617] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.060637] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.060693] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.060713] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.060781] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.060801] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.060845] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.060858] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.060874] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.060890] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.060947] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.060979] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.060999] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.061018] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.061051] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.061070] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.061090] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.061110] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.061167] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.061223] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.061243] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.061263] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.061307] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.061319] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.061332] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.061344] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.061357] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.061377] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.061396] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.061417] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.061436] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.061456] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.061476] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.061496] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.061509] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.061529] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.061548] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.061568] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<5>[ 18.082829] audit: type=1400 audit(1740819385.313:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=429 comm="apparmor_parser"
<5>[ 18.083464] audit: type=1400 audit(1740819385.314:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=430 comm="apparmor_parser"
<5>[ 18.083834] audit: type=1400 audit(1740819385.314:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=431 comm="apparmor_parser"
<5>[ 18.084213] audit: type=1400 audit(1740819385.315:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=428 comm="apparmor_parser"
<5>[ 18.087606] audit: type=1400 audit(1740819385.318:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=432 comm="apparmor_parser"
<5>[ 18.089000] audit: type=1400 audit(1740819385.320:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=433 comm="apparmor_parser"
<5>[ 18.091871] audit: type=1400 audit(1740819385.322:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=434 comm="apparmor_parser"
<5>[ 18.094777] audit: type=1400 audit(1740819385.325:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=435 comm="apparmor_parser"
<5>[ 18.095549] audit: type=1400 audit(1740819385.326:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=436 comm="apparmor_parser"
<5>[ 18.098532] audit: type=1400 audit(1740819385.329:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=437 comm="apparmor_parser"
<3>[ 18.169078] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121
<3>[ 18.237034] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121
<6>[ 18.471751] ACPI: bus type thunderbolt registered
<6>[ 18.495363] idma64 idma64.0: Found Intel integrated DMA 64-bit
<6>[ 18.498519] idma64 idma64.1: Found Intel integrated DMA 64-bit
<6>[ 18.531293] idma64 idma64.2: Found Intel integrated DMA 64-bit
<6>[ 18.542447] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002)
<6>[ 18.558827] idma64 idma64.3: Found Intel integrated DMA 64-bit
<6>[ 18.558996] e1000e: Intel(R) PRO/1000 Network Driver
<6>[ 18.559003] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<6>[ 18.559138] e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
<6>[ 18.561166] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
<6>[ 18.562448] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43
<6>[ 18.562453] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS
<6>[ 18.615693] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0
<6>[ 18.747299] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
<6>[ 18.747307] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
<6>[ 18.747309] RAPL PMU: hw unit of domain package 2^-14 Joules
<6>[ 18.747310] RAPL PMU: hw unit of domain dram 2^-14 Joules
<6>[ 18.747311] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
<6>[ 18.747313] RAPL PMU: hw unit of domain psys 2^-14 Joules
<6>[ 18.749426] cryptd: max_cpu_qlen set to 1000
<6>[ 18.752791] AES CTR mode by8 optimization enabled
<6>[ 18.759862] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402)
<6>[ 18.770410] intel_rapl_common: Found RAPL domain package
<6>[ 18.770416] intel_rapl_common: Found RAPL domain dram
<6>[ 18.785413] r8169 0000:7f:00.0: enabling device (0000 -> 0003)
<6>[ 18.822707] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0
<6>[ 18.844515] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, 50:91:e3:c9:15:be, XID 541, IRQ 192
<6>[ 18.844524] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
<6>[ 19.042401] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
<6>[ 19.158209] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 90:49:fa:0a:35:92
<6>[ 19.158219] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection
<6>[ 19.158337] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF
<6>[ 19.223279] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin
<6>[ 19.250363] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888
<6>[ 19.250368] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716
<6>[ 19.250370] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472
<4>[ 19.307663] block nvme0n1: No UUID available providing old NGUID
<6>[ 19.470510] intel_rapl_common: Found RAPL domain package
<6>[ 19.470516] intel_rapl_common: Found RAPL domain core
<6>[ 19.470519] intel_rapl_common: Found RAPL domain uncore
<6>[ 19.470521] intel_rapl_common: Found RAPL domain dram
<6>[ 19.470523] intel_rapl_common: Found RAPL domain psys
<6>[ 19.791264] evm: overlay not supported
<6>[ 19.861773] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth1
<6>[ 19.867675] r8169 0000:7f:00.0 enp127s0: renamed from eth0
<6>[ 19.957821] loop0: detected capacity change from 0 to 8
<4>[ 19.966315] spi-nor spi0.0: supply vcc not found, using dummy regulator
<5>[ 19.995200] Creating 1 MTD partitions on "0000:00:1f.5":
<5>[ 19.995218] 0x000000000000-0x000002000000 : "BIOS"
<6>[ 20.021125] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC)
<6>[ 20.179966] r8169 0000:7f:00.0 enp127s0: Link is Down
<6>[ 20.194467] Consider using thermal netlink events interface
<6>[ 20.264127] hid: raw HID events driver (C) Jiri Kosina
<6>[ 20.276730] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
<6>[ 20.319504] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 20.321827] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 20.325014] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 20.326696] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 20.329152] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 20.330292] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 20.336385] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 20.340730] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 20.345913] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 20.349636] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 20.353040] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 20.355780] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 21.037937] typec port0: bound usb3-port1 (ops connector_ops)
<6>[ 21.037962] typec port0: bound usb2-port1 (ops connector_ops)
<6>[ 21.951668] typec port1: bound usb3-port2 (ops connector_ops)
<6>[ 21.951697] typec port1: bound usb2-port2 (ops connector_ops)
<6>[ 23.743972] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off
<7>[ 28.382749] systemd-journald[210]: /var/log/journal/969c3e4a3b0c44bb886902ddd4fce94a/user-1000.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 54.028196] [IGT] xe_module_load: executing
<7>[ 54.042524] [IGT] xe_module_load: starting subtest load
<5>[ 54.227787] Setting dangerous option force_probe - tainting kernel
<6>[ 54.230525] xe 0000:00:02.0: vgaarb: deactivate vga console
<6>[ 54.232142] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0
<7>[ 54.232155] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG / Xe2_HPG / Xe3_LPG (20.04) media:Xe2_LPM / Xe2_HPM / Xe3_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0
<7>[ 54.232244] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)
<7>[ 54.232320] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)
<6>[ 54.236125] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.36.0
<7>[ 54.239941] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002523d7
<7>[ 54.240030] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7>[ 54.240102] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000
<7>[ 54.240168] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 54.240226] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006ca
<7>[ 54.240283] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 54.240339] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 54.240395] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 54.240449] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 54.240503] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 54.240556] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 54.240608] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 54.240660] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 54.240712] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 54.240763] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 54.240859] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7>[ 54.242178] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[ 54.242266] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 54.251924] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 54.253003] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 54.253162] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT safe-mode enabled
<7>[ 54.253359] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,0000007f
<7>[ 54.253515] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,0000007f
<7>[ 54.253660] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 000000ff
<7>[ 54.253802] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 54.253970] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,000000ff
<6>[ 54.254982] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.36.0
<7>[ 54.259569] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c5e3d7
<7>[ 54.259740] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 54.259904] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000
<7>[ 54.260051] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 54.260192] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae2
<7>[ 54.260327] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 54.260461] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 54.260598] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 54.260732] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 54.260862] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 54.261026] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 54.261154] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 54.261301] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 54.261457] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<6>[ 54.263784] xe 0000:00:02.0: [drm] Using HuC firmware from xe/lnl_huc.bin version 9.4.13
<6>[ 54.267704] xe 0000:00:02.0: [drm] Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.0.1263
<6>[ 54.269147] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])
<7>[ 54.269387] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 54.269668] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7>[ 54.271426] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 54.271760] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 54.292350] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 54.292808] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 54.293031] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT safe-mode enabled
<7>[ 54.293239] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,00000000
<7>[ 54.293427] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,00000000
<7>[ 54.293602] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 00000000
<7>[ 54.293770] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 54.293959] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,0000000f
<7>[ 54.294719] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes
<7>[ 54.295088] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7>[ 54.295390] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018
<7>[ 54.295705] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0
<7>[ 54.296014] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported
<7>[ 54.296282] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported
<7>[ 54.296507] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported
<7>[ 54.296726] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present
<7>[ 54.296999] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)
<7>[ 54.297235] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num qgv points 4
<7>[ 54.297514] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8
<7>[ 54.297778] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes
<7>[ 54.298066] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152
<7>[ 54.298401] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296
<7>[ 54.298674] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392
<7>[ 54.298955] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520
<7>[ 54.299268] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400
<7>[ 54.299525] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800
<7>[ 54.299781] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 54.300084] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 54.300336] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400
<7>[ 54.300585] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 54.300834] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 54.301118] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 54.301372] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400
<7>[ 54.301605] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 54.301831] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 54.302077] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 54.302332] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400
<7>[ 54.302544] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 54.302751] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 54.303009] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 54.303215] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400
<7>[ 54.303415] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 54.303616] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 54.303815] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 54.304039] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400
<7>[ 54.304265] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 54.304449] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 54.304641] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 54.304839] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7>[ 54.305817] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7>[ 54.306137] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 260
<7>[ 54.306453] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7>[ 54.306705] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7>[ 54.307027] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7>[ 54.307267] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7>[ 54.307514] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 848, min size 848)
<7>[ 54.307744] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7>[ 54.308032] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7>[ 54.308272] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7>[ 54.308516] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7>[ 54.308726] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7>[ 54.308955] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7>[ 54.309165] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7>[ 54.309419] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7>[ 54.309631] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7>[ 54.309826] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7>[ 54.310045] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 260 not known; assuming 40
<7>[ 54.310283] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806
<7>[ 54.310496] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 54.310720] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 54.310920] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 54.311113] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7>[ 54.311300] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[ 54.311495] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 54.311687] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 54.311887] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 54.312082] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a
<7>[ 54.312364] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 54.312699] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7>[ 54.313012] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 54.313318] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7>[ 54.313654] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.
<7>[ 54.313977] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7>[ 54.314292] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 54.314547] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 54.314843] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6>[ 54.315138] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=mem
<7>[ 54.315191] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7>[ 54.315487] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7>[ 54.315754] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7>[ 54.316037] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7>[ 54.317095] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC
<7>[ 54.317416] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin
<7>[ 54.318621] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7>[ 54.318842] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us
<7>[ 54.319056] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 9 (9.0 usec)
<7>[ 54.319227] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 103 (103.0 usec)
<7>[ 54.319390] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 103 (103.0 usec)
<7>[ 54.319545] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 103 (103.0 usec)
<7>[ 54.319703] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 96 (96.0 usec)
<7>[ 54.319853] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 103 (103.0 usec)
<7>[ 54.321956] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7>[ 54.322103] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7>[ 54.322240] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7>[ 54.322369] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)
<7>[ 54.322492] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)
<7>[ 54.322611] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57b856f4 (EVT_HTP)
<7>[ 54.322730] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7>[ 54.322842] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0
<7>[ 54.322964] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 54.323074] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)
<7>[ 54.323182] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 54.323288] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)
<7>[ 54.323387] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 54.323480] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)
<7>[ 54.323575] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7>[ 54.323660] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0
<7>[ 54.323743] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 54.323824] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)
<7>[ 54.323912] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 54.323993] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)
<7>[ 54.324084] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 54.324169] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)
<7>[ 54.324259] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7>[ 54.324343] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0
<7>[ 54.324428] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 54.324511] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)
<7>[ 54.324595] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 54.324677] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)
<7>[ 54.324752] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 54.324830] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)
<7>[ 54.327843] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available.
<7>[ 54.331781] xe 0000:00:02.0: [drm:intel_cdclk_dump_config [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 54.331916] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7>[ 54.332036] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7>[ 54.332234] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:188:DDI A/PHY A] Using AUX CH A (VBT)
<7>[ 54.332565] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:188:DDI A/PHY A]
<7>[ 54.332913] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2
<7>[ 54.333127] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2
<7>[ 54.333333] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless
<7>[ 54.333552] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7>[ 54.333789] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300
<7>[ 54.334007] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002
<7>[ 54.334200] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName
<7>[ 54.334389] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz
<7>[ 54.334577] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7>[ 54.334799] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:188:DDI A/PHY A] initial power sequencer: PPS 0
<7>[ 54.335397] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 54.335596] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<6>[ 54.335811] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.28)
<7>[ 54.335781] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 54.335974] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 54.336148] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 54.336351] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 54.336612] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 54.337919] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 54.338150] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7>[ 54.340306] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 54.340934] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000
<7>[ 54.341840] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e
<7>[ 54.343388] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3
<7>[ 54.344055] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported
<7>[ 54.346574] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 54.356944] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 54.356965] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 54.356968] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.356970] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 54.356974] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.356976] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 54.356984] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.356987] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 54.356990] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 54.357054] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 54.357057] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 54.357058] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.357072] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:189:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 54.357690] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:189:eDP-1] Performing OUI wait (0 ms)
<7>[ 54.358308] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:189:eDP-1] Detected unsupported HDR backlight interface version 0
<7>[ 54.358461] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:189:eDP-1] DRRS type: none
<7>[ 54.358652] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:189:eDP-1] Using native PCH PWM for backlight control (controller=0)
<7>[ 54.358833] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:189:eDP-1] backlight initialized, enabled, brightness 192000/192000
<7>[ 54.359081] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 54.359224] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 54.359332] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 54.359422] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 54.359508] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 54.359624] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 54.359856] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:197:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)
<7>[ 54.360260] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 54.360409] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 54.360852] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:209:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)
<7>[ 54.360999] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 54.361134] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 54.361432] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:217:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)
<7>[ 54.361566] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 54.361701] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 54.362295] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:82:pipe A] hw state readout: enabled
<7>[ 54.362447] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:134:pipe B] hw state readout: disabled
<7>[ 54.362581] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:186:pipe C] hw state readout: disabled
<7>[ 54.362669] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] hw state readout: enabled, pipe A
<7>[ 54.362755] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] hw state readout: disabled, pipe A
<7>[ 54.362840] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] hw state readout: disabled, pipe A
<7>[ 54.362934] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] hw state readout: disabled, pipe A
<7>[ 54.363020] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] hw state readout: disabled, pipe A
<7>[ 54.363105] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] hw state readout: disabled, pipe A
<7>[ 54.363188] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] hw state readout: disabled, pipe B
<7>[ 54.363272] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] hw state readout: disabled, pipe B
<7>[ 54.363354] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] hw state readout: disabled, pipe B
<7>[ 54.363436] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] hw state readout: disabled, pipe B
<7>[ 54.363518] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] hw state readout: disabled, pipe B
<7>[ 54.363599] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] hw state readout: disabled, pipe B
<7>[ 54.363681] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] hw state readout: disabled, pipe C
<7>[ 54.363762] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] hw state readout: disabled, pipe C
<7>[ 54.363843] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] hw state readout: disabled, pipe C
<7>[ 54.363935] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] hw state readout: disabled, pipe C
<7>[ 54.364018] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] hw state readout: disabled, pipe C
<7>[ 54.364099] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] hw state readout: disabled, pipe C
<7>[ 54.364901] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
<7>[ 54.365030] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:188:DDI A/PHY A] hw state readout: enabled, pipe A
<7>[ 54.365128] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected)
<7>[ 54.365227] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:197:DDI TC1/PHY TC1] hw state readout: disabled, pipe A
<7>[ 54.365311] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:199:DP-MST A] hw state readout: disabled, pipe A
<7>[ 54.365391] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:200:DP-MST B] hw state readout: disabled, pipe B
<7>[ 54.365471] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:201:DP-MST C] hw state readout: disabled, pipe C
<7>[ 54.365555] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected)
<7>[ 54.365644] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:209:DDI TC2/PHY TC2] hw state readout: disabled, pipe A
<7>[ 54.365726] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:211:DP-MST A] hw state readout: disabled, pipe A
<7>[ 54.365805] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:212:DP-MST B] hw state readout: disabled, pipe B
<7>[ 54.365893] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DP-MST C] hw state readout: disabled, pipe C
<7>[ 54.365976] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected)
<7>[ 54.366064] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DDI TC3/PHY TC3] hw state readout: disabled, pipe A
<7>[ 54.366147] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:219:DP-MST A] hw state readout: disabled, pipe A
<7>[ 54.366226] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:220:DP-MST B] hw state readout: disabled, pipe B
<7>[ 54.366305] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:221:DP-MST C] hw state readout: disabled, pipe C
<7>[ 54.366418] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:189:eDP-1] hw state readout: enabled
<7>[ 54.366508] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:198:DP-1] hw state readout: disabled
<7>[ 54.366592] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:210:DP-2] hw state readout: disabled
<7>[ 54.366674] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:218:DP-3] hw state readout: disabled
<7>[ 54.367058] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] min_cdclk 173855 kHz
<7>[ 54.367147] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] min_cdclk 0 kHz
<7>[ 54.367225] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] min_cdclk 0 kHz
<7>[ 54.367303] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] min_cdclk 0 kHz
<7>[ 54.367380] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] min_cdclk 0 kHz
<7>[ 54.367458] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] min_cdclk 0 kHz
<7>[ 54.367538] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe A data rate 1390840 num active planes 1
<7>[ 54.367658] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] min_cdclk 0 kHz
<7>[ 54.367746] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] min_cdclk 0 kHz
<7>[ 54.367827] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] min_cdclk 0 kHz
<7>[ 54.367912] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] min_cdclk 0 kHz
<7>[ 54.367993] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] min_cdclk 0 kHz
<7>[ 54.368072] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] min_cdclk 0 kHz
<7>[ 54.368151] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe B data rate 0 num active planes 0
<7>[ 54.368266] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] min_cdclk 0 kHz
<7>[ 54.368351] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] min_cdclk 0 kHz
<7>[ 54.368431] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] min_cdclk 0 kHz
<7>[ 54.368510] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] min_cdclk 0 kHz
<7>[ 54.368588] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] min_cdclk 0 kHz
<7>[ 54.368666] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] min_cdclk 0 kHz
<7>[ 54.368744] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe C data rate 0 num active planes 0
<7>[ 54.368908] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no
<7>[ 54.369027] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A
<7>[ 54.369259] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [setup_hw_state]
<7>[ 54.369376] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 54.369484] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
<7>[ 54.369583] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 54.369681] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 54.369776] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 54.369877] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 54.369973] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64
<7>[ 54.370069] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 54.370162] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 54.370253] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 54.370344] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7>[ 54.370434] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[ 54.370524] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7>[ 54.370614] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[ 54.370705] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 1, framestart delay: 1, MSA timing delay: 0
<7>[ 54.370794] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96
<7>[ 54.370892] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906
<7>[ 54.370983] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 54.371075] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 54.371166] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 54.371257] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 54.371347] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 54.371437] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 54.371525] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 54.371614] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 54.371703] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 54.371791] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 54.371887] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000
<7>[ 54.371979] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0
<7>[ 54.372068] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 54.372158] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 54.372247] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 54.372335] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 54.372424] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 54.372512] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 54.372600] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 54.372689] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 54.372777] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 54.372865] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 54.372958] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 54.373048] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:134:pipe B] enable: no [setup_hw_state]
<7>[ 54.373136] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:186:pipe C] enable: no [setup_hw_state]
<7>[ 54.373376] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:82:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no
<7>[ 54.373479] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:134:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 54.373575] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:186:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 54.373946] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:82:pipe A][PLANE:32:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800
<7>[ 54.374043] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:32:plane 1A] on [CRTC:82:pipe A]
<7>[ 54.400109] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT1: GuC CT safe-mode canceled
<7>[ 54.464339] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT0: GuC CT safe-mode canceled
<6>[ 54.603596] xe 0000:00:02.0: [drm] ccs1 fused off
<6>[ 54.603600] xe 0000:00:02.0: [drm] ccs2 fused off
<6>[ 54.603601] xe 0000:00:02.0: [drm] ccs3 fused off
<7>[ 54.603673] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add rcs0 whitelist to engine
<7>[ 54.603766] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 54.603852] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 54.603952] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 54.604053] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs0 whitelist to engine
<7>[ 54.604151] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs8 whitelist to engine
<7>[ 54.604252] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add ccs0 whitelist to engine
<7>[ 54.604319] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 54.604389] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 54.604453] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 54.605260] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs
<7>[ 54.605327] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000
<7>[ 54.605398] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000
<7>[ 54.605466] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440
<7>[ 54.605532] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000
<7>[ 54.605599] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000
<7>[ 54.605666] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f
<7>[ 54.605736] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1
<7>[ 54.605802] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16
<7>[ 54.605871] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc
<7>[ 54.605935] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 54.605997] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130
<7>[ 54.606061] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 54.606122] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100
<7>[ 54.606181] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100
<7>[ 54.606238] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100
<7>[ 54.606296] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100
<7>[ 54.606352] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100
<7>[ 54.606407] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100
<7>[ 54.606462] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100
<7>[ 54.606517] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100
<7>[ 54.606571] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100
<7>[ 54.606626] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100
<7>[ 54.606682] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100
<7>[ 54.606740] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100
<7>[ 54.606796] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs
<7>[ 54.606858] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306
<7>[ 54.606932] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080
<7>[ 54.606994] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d0] = 0x1000dafc
<7>[ 54.607055] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d4] = 0x1000db01
<7>[ 54.607115] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d8] = 0x0000db1c
<7>[ 54.607177] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040
<7>[ 54.607239] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200
<7>[ 54.607299] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000
<7>[ 54.607358] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08000800
<7>[ 54.607414] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002
<7>[ 54.607477] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000
<7>[ 54.607539] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000
<7>[ 54.607754] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs
<7>[ 54.607811] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306
<7>[ 54.607876] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080
<7>[ 54.608156] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs
<7>[ 54.608216] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306
<7>[ 54.608273] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080
<7>[ 54.608452] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs
<7>[ 54.608502] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0306
<7>[ 54.608551] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080
<7>[ 54.608602] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d0] = 0x1000dafc
<7>[ 54.608651] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d4] = 0x1000db01
<7>[ 54.608699] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d8] = 0x0000db1c
<7>[ 54.609061] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002523d7
<7>[ 54.609129] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000800
<7>[ 54.609194] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000014
<7>[ 54.609255] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 54.609310] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006ca
<7>[ 54.609362] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 54.609413] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 54.609462] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 54.609511] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 54.609559] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 54.609605] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 54.609651] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 54.609697] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 54.609742] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 54.609803] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs
<7>[ 54.610033] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells
<7>[ 54.612666] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 42 ext-regs.
<7>[ 54.625649] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: ADS capture alloc size changed from 45056 to 20480
<7>[ 54.626424] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 54.635951] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 54.636312] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 54.637114] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA rcs0 save-restore batch
<7>[ 54.637207] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400
<7>[ 54.637295] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x00400040
<7>[ 54.637377] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020
<7>[ 54.637465] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = 0x3ca18000
<7>[ 54.637548] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240
<7>[ 54.637630] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000
<7>[ 54.637709] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420
<7>[ 54.637792] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000
<7>[ 54.640451] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA bcs0 save-restore batch
<7>[ 54.640536] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = 0x00000606
<7>[ 54.640617] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<7>[ 54.643700] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<6>[ 54.647590] xe 0000:00:02.0: [drm] vcs1 fused off
<6>[ 54.647593] xe 0000:00:02.0: [drm] vcs2 fused off
<6>[ 54.647594] xe 0000:00:02.0: [drm] vcs3 fused off
<6>[ 54.647595] xe 0000:00:02.0: [drm] vcs4 fused off
<6>[ 54.647596] xe 0000:00:02.0: [drm] vcs5 fused off
<6>[ 54.647597] xe 0000:00:02.0: [drm] vcs6 fused off
<6>[ 54.647598] xe 0000:00:02.0: [drm] vcs7 fused off
<6>[ 54.647599] xe 0000:00:02.0: [drm] vecs1 fused off
<6>[ 54.647600] xe 0000:00:02.0: [drm] vecs2 fused off
<6>[ 54.647602] xe 0000:00:02.0: [drm] vecs3 fused off
<7>[ 54.647626] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vcs0 whitelist to engine
<7>[ 54.647758] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vecs0 whitelist to engine
<7>[ 54.647890] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add gsccs0 whitelist to engine
<7>[ 54.648524] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs
<7>[ 54.648636] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000
<7>[ 54.648748] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000
<7>[ 54.648852] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440
<7>[ 54.648964] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000
<7>[ 54.649063] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000
<7>[ 54.649157] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f
<7>[ 54.649251] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1
<7>[ 54.649346] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16
<7>[ 54.649438] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc
<7>[ 54.649529] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 54.649620] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130
<7>[ 54.649710] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 54.649798] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100
<7>[ 54.649891] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100
<7>[ 54.649979] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100
<7>[ 54.650064] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100
<7>[ 54.650148] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100
<7>[ 54.650234] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100
<7>[ 54.650320] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100
<7>[ 54.650405] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100
<7>[ 54.650489] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100
<7>[ 54.650573] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100
<7>[ 54.650655] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100
<7>[ 54.650736] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100
<7>[ 54.650815] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs
<7>[ 54.650939] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000
<7>[ 54.651704] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs
<7>[ 54.651828] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000
<7>[ 54.652210] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs
<7>[ 54.652312] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000
<7>[ 54.652852] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c5e3d7
<7>[ 54.652971] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 54.653065] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000014
<7>[ 54.653156] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 54.653244] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae2
<7>[ 54.653331] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 54.653415] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 54.653496] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 54.653578] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 54.653657] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 54.653734] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 54.653809] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 54.653886] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 54.653955] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<7>[ 54.654043] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs
<7>[ 54.654148] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells
<7>[ 54.671560] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: ADS capture alloc size changed from 45056 to 24576
<7>[ 54.672595] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 54.672749] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 54.692206] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 54.692653] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 54.694098] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 54.696710] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 54.700448] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 54.742912] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC
<7>[ 54.745011] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[ 54.745396] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[ 54.745764] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 2048) -> ( 0 - 0), size 2048 -> 0
<7>[ 54.746124] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] ddb ( 0 - 0) -> (4054 - 4096), size 0 -> 42
<7>[ 54.746429] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 54.746791] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 54.747168] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 54.747506] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 54.747894] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 54.749683] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x13410e72)
<7>[ 54.750220] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A)
<7>[ 54.750530] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7>[ 54.758396] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc010e72)
<7>[ 54.768357] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:189:eDP-1] adding connector to sysfs
<7>[ 54.773569] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:189:eDP-1] backlight device intel_backlight registered
<7>[ 54.774434] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
<7>[ 54.777212] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:189:eDP-1] generating connector hotplug event
<7>[ 54.777388] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:198:DP-1] adding connector to sysfs
<7>[ 54.778093] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1
<7>[ 54.779194] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:198:DP-1] generating connector hotplug event
<7>[ 54.779249] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:210:DP-2] adding connector to sysfs
<7>[ 54.779874] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2
<7>[ 54.780552] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:210:DP-2] generating connector hotplug event
<7>[ 54.780591] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:218:DP-3] adding connector to sysfs
<7>[ 54.781029] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3
<7>[ 54.781562] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:218:DP-3] generating connector hotplug event
<6>[ 54.781595] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0
<7>[ 54.781622] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected
<6>[ 54.789321] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6>[ 54.791819] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
<7>[ 54.792960] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7>[ 54.793094] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7>[ 54.794116] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:32:plane 1A] no fb, skipping
<7>[ 54.794221] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:134:pipe B] not active, skipping
<7>[ 54.794307] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:186:pipe C] not active, skipping
<7>[ 54.794391] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7>[ 54.794552] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 54.794735] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 54.794750] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 54.795405] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 54.795925] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 54.796052] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 54.796175] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 54.796432] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 54.796439] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 54.796441] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.796442] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 54.796445] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.796447] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 54.796452] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.796453] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 54.796456] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.796480] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 54.796593] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 54.797251] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 54.797361] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 54.798357] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] status updated from unknown to connected
<5>[ 54.798559] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 54.798561] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 54.798562] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.798608] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 54.798621] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 54.798632] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 54.798642] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 54.798771] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 54.798887] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] status updated from unknown to disconnected
<7>[ 54.798899] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 54.798907] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 54.798915] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 54.799050] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 54.799166] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] status updated from unknown to disconnected
<7>[ 54.799174] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 54.799181] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 54.799186] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 54.799289] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 54.799378] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] status updated from unknown to disconnected
<7>[ 54.799385] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 54.799390] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 54.799393] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 54.799395] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 54.799397] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 54.799457] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 54.799467] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 54.799470] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 54.799472] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 54.799474] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7>[ 54.799484] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 54.799513] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<7>[ 54.799558] xe 0000:00:02.0: [drm:intelfb_create [xe]] no BIOS fb, allocating a new one
<7>[ 54.799588] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 54.799757] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 54.799975] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 54.801298] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[ 54.806564] xe 0000:00:02.0: [drm:intelfb_create [xe]] allocated 2880x1800 fb: 0x01d95000
<6>[ 54.807328] fbcon: xedrmfb (fb0) is primary device
<7>[ 54.808152] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:189:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7>[ 54.808307] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:188:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7>[ 54.808426] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7>[ 54.808540] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7>[ 54.808649] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:188:DDI A/PHY A] [CRTC:82:pipe A]
<7>[ 54.808756] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288)
<7>[ 54.808862] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10
<7>[ 54.809014] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7>[ 54.809126] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes,
<7>[ 54.809221] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1,
<7>[ 54.809304] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1.
<7>[ 54.809388] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 54.809468] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 54.809546] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7>[ 54.809625] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 54.809703] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 54.809780] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 54.809854] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7>[ 54.809956] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7>[ 54.810061] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no,
<7>[ 54.810157] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1.
<7>[ 54.810241] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 54.810320] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 54.810398] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7>[ 54.810470] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 54.810542] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 54.810613] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 54.810684] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7>[ 54.810754] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30)
<7>[ 54.810832] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000)
<7>[ 54.810925] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7>[ 54.811073] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054
<7>[ 54.811190] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7>[ 54.811274] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 3, 1 -> 2, 12, 12, 12, 11, 12, 0, 0, 0, 3, 0
<7>[ 54.811349] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] blocks 25, 25, 25, 25, 25, 25, 0, 0, 7, 73, 7 -> 49, 289, 289, 289, 265, 289, 0, 0, 63, 73, 87
<7>[ 54.811422] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 319, 319, 319, 293, 319, 0, 0, 64, 82, 88
<7>[ 54.811493] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 54.811563] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.811632] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.811700] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.811771] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 54.811837] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.811919] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.812006] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.812090] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 54.812174] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.812248] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.812317] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.812383] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 54.812449] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.812514] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.812580] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.812644] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 54.812705] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.812766] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.812827] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.812898] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:82:pipe A] data rate 1390840 num active planes 1
<7>[ 54.813015] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 54.813128] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 54.813232] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 54.813319] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 54.813404] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 54.813502] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (27165 kHz) > old min cdclk (0 kHz)
<7>[ 54.813611] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [modeset]
<7>[ 54.813694] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 54.813773] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7>[ 54.813850] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 54.813950] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 54.814054] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 54.814153] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 54.814235] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7>[ 54.814315] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 54.814389] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 54.814461] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 54.814534] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7>[ 54.814604] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[ 54.814674] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7>[ 54.814743] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7>[ 54.814812] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7>[ 54.814883] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7>[ 54.814971] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7>[ 54.815058] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7>[ 54.815145] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7>[ 54.815224] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[ 54.815296] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0
<7>[ 54.815367] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1906, vmax: 2859, flipline: 1906, pipeline full: 0, guardband: 106 vsync start: 103, vsync end: 97
<7>[ 54.815436] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1800, vmax vblank: 2753, vmin vtotal: 1906, vmax vtotal: 2859
<7>[ 54.815502] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 54.815567] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 54.815631] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 54.815693] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 54.815755] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 54.815815] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 54.815881] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 54.815960] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 54.816038] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 54.816115] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 54.816191] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7>[ 54.816256] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7>[ 54.816324] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 54.816389] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 54.816453] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 54.816516] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 54.816579] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 54.816641] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 54.816702] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 54.816762] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 54.816821] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 54.816885] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 54.816958] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 54.817036] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:32:plane 1A] fb: [FB:190] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7>[ 54.817115] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7>[ 54.817191] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7>[ 54.817261] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:41:plane 2A] fb: [NOFB], visible: no
<7>[ 54.817326] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:50:plane 3A] fb: [NOFB], visible: no
<7>[ 54.817384] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:59:plane 4A] fb: [NOFB], visible: no
<7>[ 54.817442] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:68:plane 5A] fb: [NOFB], visible: no
<7>[ 54.817500] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:77:cursor A] fb: [NOFB], visible: no
<7>[ 54.828143] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<6>[ 54.848706] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0
<7>[ 54.849268] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed
<7>[ 54.872597] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC
<7>[ 55.032077] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 0
<7>[ 55.033798] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7>[ 55.044642] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power off
<7>[ 55.044850] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 55.044996] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power off time
<7>[ 55.045172] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 55.045289] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7>[ 55.097606] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 55.097930] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 55.127579] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 55.128098] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 55.128151] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7>[ 55.129343] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 55.130227] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)
<7>[ 55.130685] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:188:DDI A/PHY A]
<7>[ 55.131026] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 55.131304] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:199:DP-MST A]
<7>[ 55.131562] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:200:DP-MST B]
<7>[ 55.131811] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:201:DP-MST C]
<7>[ 55.132086] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 55.132376] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:211:DP-MST A]
<7>[ 55.132638] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:212:DP-MST B]
<7>[ 55.132921] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 55.133183] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 55.133498] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7>[ 55.133760] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DP-MST C]
<7>[ 55.133773] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 55.134013] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 55.134245] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DP-MST A]
<7>[ 55.134484] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:220:DP-MST B]
<7>[ 55.134721] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:221:DP-MST C]
<7>[ 55.134987] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 55.137636] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power on
<7>[ 55.137897] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power cycle (491 ms remaining)
<7>[ 55.278473] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed
<7>[ 55.632157] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7>[ 55.674073] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 55.674591] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power on
<7>[ 55.675118] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7>[ 55.710843] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 55.711212] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 55.711538] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7>[ 55.711911] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 55.848910] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 55.848906] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 55.848885] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 55.999175] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 56.001490] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 56.001971] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7>[ 56.005641] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 56.006971] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Reloading eDP link rates
<7>[ 56.008768] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7>[ 56.010096] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7>[ 56.011297] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7>[ 56.012702] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Clock recovery OK
<7>[ 56.013108] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7>[ 56.014904] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7>[ 56.015280] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7>[ 56.016082] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7>[ 56.016628] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7>[ 56.017038] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7>[ 56.017513] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 192000
<6>[ 56.019540] xe 0000:00:02.0: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
<7>[ 56.019565] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 11059200 bytes of contiguous stolen space for FBC, limit: 2
<7>[ 56.019953] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:32:plane 1A]
<7>[ 56.034472] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7>[ 56.037001] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:189:eDP-1]
<7>[ 56.037452] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:82:pipe A]
<7>[ 56.038981] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp
<6>[ 56.041808] Console: switching to colour frame buffer device 180x56
<6>[ 56.055250] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device
<7>[ 56.066098] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20
<7>[ 56.067152] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7>[ 56.067495] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7>[ 56.067803] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7>[ 56.068147] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7>[ 56.068443] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7>[ 56.068697] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7>[ 56.069019] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]]
<7>[ 56.069086] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 56.069020] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7>[ 56.069270] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7>[ 56.069488] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7>[ 56.069698] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7>[ 56.069948] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 56.069921] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7>[ 56.069987] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 56.070118] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7>[ 56.070307] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7>[ 56.070493] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7>[ 56.070670] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7>[ 56.070840] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7>[ 56.071053] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7>[ 56.071255] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7>[ 56.071438] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 56.071509] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7>[ 56.071759] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7>[ 56.072054] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7>[ 56.072326] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 56.072681] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 56.073059] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 56.073326] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device
<7>[ 56.073657] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC
<7>[ 56.074019] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 56.074034] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 56.074039] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 56.074042] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 56.074049] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 56.074054] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 56.074079] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 56.074082] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 56.074090] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 56.074016] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7>[ 56.074141] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 56.074388] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7>[ 56.074417] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 56.074678] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7>[ 56.075056] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 56.076038] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 56.076254] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<5>[ 56.078382] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 56.078388] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 56.078391] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 56.078483] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 56.078529] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 56.078558] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 56.078583] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 56.079004] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 56.079387] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 56.079492] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7>[ 56.079705] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[ 56.080109] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 56.080698] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 56.080730] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 56.080755] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 56.081197] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 56.081551] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 56.081578] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 56.081601] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 56.082415] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 56.082723] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 56.082753] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 56.082765] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 56.082772] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 56.082778] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 56.083846] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 56.084481] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 56.084492] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 56.084499] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 56.084506] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7>[ 56.085937] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 56.090521] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 56.090900] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7>[ 56.100445] xe 0000:00:02.0: [drm:drm_client_dev_hotplug] intel-fbdev: ret=0
<6>[ 56.146306] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<6>[ 56.150880] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])
<7>[ 56.151206] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7>[ 56.151473] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7>[ 56.167158] xe 0000:00:02.0: [drm:drm_client_dev_restore] intel-fbdev: ret=0
<7>[ 56.167263] [IGT] xe_module_load: finished subtest load, SUCCESS
<7>[ 56.167330] [IGT] xe_module_load: exiting, ret=0
<7>[ 56.185229] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 56.185377] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 56.185472] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[ 56.192515] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 56.192642] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 56.192735] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 56.192821] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 56.192918] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 56.193001] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 56.193083] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 56.193166] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 56.193249] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 56.193332] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 56.193414] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 56.193495] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 56.193576] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 56.193657] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 56.193738] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 56.193820] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 56.193910] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 56.194000] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 56.194083] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 56.194167] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 56.194216] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000
<7>[ 56.194251] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 56.194332] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 56.194342] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:189:eDP-1] set backlight level = 13892
<7>[ 56.194414] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 56.194496] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 56.194577] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 56.194659] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 56.194741] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 56.194823] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 56.194963] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 56.195047] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 56.195126] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 56.195204] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 56.195283] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 56.195361] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 56.195440] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 56.195519] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<6>[ 56.204241] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
<6>[ 56.208797] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
<6>[ 56.210048] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
<6>[ 56.210780] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
<7>[ 57.127969] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 57.127986] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 57.127961] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 57.449452] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 58.624232] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD off
<7>[ 58.624615] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067