<5>[ 0.000000] Linux version 6.14.0-rc4-xe+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Fri Feb 28 21:38:22 UTC 2025
<6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,snd_hda_intel,ast ro
<6>[ 0.000000] KERNEL supported cpus:
<6>[ 0.000000] Intel GenuineIntel
<6>[ 0.000000] AMD AuthenticAMD
<6>[ 0.000000] Hygon HygonGenuine
<6>[ 0.000000] Centaur CentaurHauls
<6>[ 0.000000] zhaoxin Shanghai
<6>[ 0.000000] x86/tme: not enabled by BIOS
<6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
<6>[ 0.000000] BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001053fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000105400000-0x000000087f7fffff] usable
<6>[ 0.000000] NX (Execute Disable) protection: active
<6>[ 0.000000] APIC: Static calls initialized
<6>[ 0.000000] efi: EFI v2.7 by Intel
<6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x68f86018 ESRT=0x68f97a98 MOKvar=0x6cd0c000
<6>[ 0.000000] efi: Remove mem279: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
<6>[ 0.000000] efi: Remove mem281: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved
<6>[ 0.000000] SMBIOS 3.8 present.
<6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3222.D97.2411281331 11/28/2024
<6>[ 0.000000] DMI: Memory slots populated: 8/8
<6>[ 0.000000] tsc: Detected 3100.000 MHz processor
<6>[ 0.000000] tsc: Detected 3110.400 MHz TSC
<7>[ 0.000008] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[ 0.000010] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[ 0.000013] last_pfn = 0x87f800 max_arch_pfn = 0x400000000
<6>[ 0.000017] MTRR map: 10 entries (3 fixed + 7 variable; max 23), built from 10 variable MTRRs
<6>[ 0.000019] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
<6>[ 0.000379] x2apic: enabled by BIOS, switching to x2apic ops
<6>[ 0.000380] last_pfn = 0x70000 max_arch_pfn = 0x400000000
<6>[ 0.004684] esrt: Reserving ESRT space from 0x0000000068f97a98 to 0x0000000068f97be8.
<7>[ 0.004692] e820: update [mem 0x68f97000-0x68f97fff] usable ==> reserved
<6>[ 0.004710] Using GB pages for direct mapping
<6>[ 0.005360] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes
<6>[ 0.005361] printk: early log buf free: 258912(98%)
<6>[ 0.005362] Secure boot disabled
<6>[ 0.005364] ACPI: Early table checksum verification disabled
<6>[ 0.005367] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL )
<6>[ 0.005369] ACPI: XSDT 0x000000006FF7C228 00019C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005374] ACPI: FACP 0x000000006FFAB000 000114 (v06 INTEL LNL 00000002 01000013)
<6>[ 0.005376] ACPI: DSDT 0x000000006FFB7000 025212 (v02 INTEL LNL 00000002 01000013)
<6>[ 0.005378] ACPI: FACS 0x000000006FEF1000 000040
<6>[ 0.005379] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930)
<6>[ 0.005381] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930)
<6>[ 0.005382] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930)
<6>[ 0.005383] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930)
<6>[ 0.005385] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930)
<6>[ 0.005386] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930)
<6>[ 0.005387] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930)
<6>[ 0.005389] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930)
<6>[ 0.005390] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930)
<6>[ 0.005391] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930)
<6>[ 0.005393] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000)
<6>[ 0.005394] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930)
<6>[ 0.005396] ACPI: SSDT 0x000000006FFE8000 002460 (v02 INTEL IgfxSsdt 00003000 INTL 20210930)
<6>[ 0.005397] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930)
<6>[ 0.005398] ACPI: SSDT 0x000000006FFDE000 008F36 (v02 INTEL TcssSsdt 00001000 INTL 20210930)
<6>[ 0.005400] ACPI: SSDT 0x000000006FFDD000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930)
<6>[ 0.005401] ACPI: SSDT 0x000000006FFB2000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930)
<6>[ 0.005403] ACPI: SSDT 0x000000006FFB0000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930)
<6>[ 0.005404] ACPI: SSDT 0x000000006FFAC000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930)
<6>[ 0.005406] ACPI: HPET 0x000000006FFAA000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005407] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005408] ACPI: APIC 0x000000006FFA8000 0000D8 (v06 INTEL LNL 00000000 01000013)
<6>[ 0.005410] ACPI: MCFG 0x000000006FFA7000 00003C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005411] ACPI: SSDT 0x000000006FFA6000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930)
<6>[ 0.005413] ACPI: SSDT 0x000000006FFA0000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930)
<6>[ 0.005414] ACPI: SSDT 0x000000006FF95000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930)
<6>[ 0.005415] ACPI: LPIT 0x000000006FF94000 0000CC (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005417] ACPI: SSDT 0x000000006FF93000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930)
<6>[ 0.005418] ACPI: SSDT 0x000000006FF92000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930)
<6>[ 0.005420] ACPI: DBGP 0x000000006FF91000 000034 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005421] ACPI: DBG2 0x000000006FF90000 000054 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.005423] ACPI: NHLT 0x000000006FF8F000 0002E3 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.005424] ACPI: SSDT 0x000000006FF8D000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930)
<6>[ 0.005425] ACPI: SSDT 0x000000006FF86000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930)
<6>[ 0.005427] ACPI: ECDT 0x000000006FF85000 000069 (v01 LNL 00000002 01000013)
<6>[ 0.005428] ACPI: DMAR 0x000000006FF84000 0000D8 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005430] ACPI: FPDT 0x000000006FF83000 000044 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005431] ACPI: SSDT 0x000000006FF82000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930)
<6>[ 0.005433] ACPI: SSDT 0x000000006FF80000 001122 (v02 SocGpe SocGpe 00003000 INTL 20210930)
<6>[ 0.005434] ACPI: SSDT 0x000000006FF7D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930)
<6>[ 0.005435] ACPI: SDEV 0x000000006FFA9000 000046 (v01 00000000 00000000)
<6>[ 0.005437] ACPI: SSDT 0x000000006FF71000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930)
<6>[ 0.005438] ACPI: SSDT 0x000000006FF63000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930)
<6>[ 0.005440] ACPI: ASF! 0x000000006FF62000 000074 (v32 INTEL LNL 00000002 01000013)
<6>[ 0.005441] ACPI: PHAT 0x000000006FF61000 0006E0 (v01 INTEL LNL 00000005 MSFT 0100000D)
<6>[ 0.005443] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005444] ACPI: Reserving FACP table memory at [mem 0x6ffab000-0x6ffab113]
<6>[ 0.005445] ACPI: Reserving DSDT table memory at [mem 0x6ffb7000-0x6ffdc211]
<6>[ 0.005445] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f]
<6>[ 0.005446] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387]
<6>[ 0.005446] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9]
<6>[ 0.005446] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa]
<6>[ 0.005447] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa]
<6>[ 0.005447] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393]
<6>[ 0.005447] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae]
<6>[ 0.005448] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f]
<6>[ 0.005448] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348]
<6>[ 0.005448] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba]
<6>[ 0.005449] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6]
<6>[ 0.005449] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f]
<6>[ 0.005449] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1]
<6>[ 0.005449] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea45f]
<6>[ 0.005450] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4]
<6>[ 0.005450] ACPI: Reserving SSDT table memory at [mem 0x6ffde000-0x6ffe6f35]
<6>[ 0.005450] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffdd0df]
<6>[ 0.005451] ACPI: Reserving SSDT table memory at [mem 0x6ffb2000-0x6ffb6ac2]
<6>[ 0.005451] ACPI: Reserving SSDT table memory at [mem 0x6ffb0000-0x6ffb140e]
<6>[ 0.005451] ACPI: Reserving SSDT table memory at [mem 0x6ffac000-0x6ffaf955]
<6>[ 0.005452] ACPI: Reserving HPET table memory at [mem 0x6ffaa000-0x6ffaa037]
<6>[ 0.005452] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027]
<6>[ 0.005452] ACPI: Reserving APIC table memory at [mem 0x6ffa8000-0x6ffa80d7]
<6>[ 0.005453] ACPI: Reserving MCFG table memory at [mem 0x6ffa7000-0x6ffa703b]
<6>[ 0.005453] ACPI: Reserving SSDT table memory at [mem 0x6ffa6000-0x6ffa66e2]
<6>[ 0.005453] ACPI: Reserving SSDT table memory at [mem 0x6ffa0000-0x6ffa5320]
<6>[ 0.005454] ACPI: Reserving SSDT table memory at [mem 0x6ff95000-0x6ff9f469]
<6>[ 0.005454] ACPI: Reserving LPIT table memory at [mem 0x6ff94000-0x6ff940cb]
<6>[ 0.005454] ACPI: Reserving SSDT table memory at [mem 0x6ff93000-0x6ff93d5b]
<6>[ 0.005455] ACPI: Reserving SSDT table memory at [mem 0x6ff92000-0x6ff921ef]
<6>[ 0.005455] ACPI: Reserving DBGP table memory at [mem 0x6ff91000-0x6ff91033]
<6>[ 0.005455] ACPI: Reserving DBG2 table memory at [mem 0x6ff90000-0x6ff90053]
<6>[ 0.005456] ACPI: Reserving NHLT table memory at [mem 0x6ff8f000-0x6ff8f2e2]
<6>[ 0.005456] ACPI: Reserving SSDT table memory at [mem 0x6ff8d000-0x6ff8e15b]
<6>[ 0.005456] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff8c53a]
<6>[ 0.005457] ACPI: Reserving ECDT table memory at [mem 0x6ff85000-0x6ff85068]
<6>[ 0.005457] ACPI: Reserving DMAR table memory at [mem 0x6ff84000-0x6ff840d7]
<6>[ 0.005457] ACPI: Reserving FPDT table memory at [mem 0x6ff83000-0x6ff83043]
<6>[ 0.005458] ACPI: Reserving SSDT table memory at [mem 0x6ff82000-0x6ff8286c]
<6>[ 0.005458] ACPI: Reserving SSDT table memory at [mem 0x6ff80000-0x6ff81121]
<6>[ 0.005458] ACPI: Reserving SSDT table memory at [mem 0x6ff7d000-0x6ff7f462]
<6>[ 0.005459] ACPI: Reserving SDEV table memory at [mem 0x6ffa9000-0x6ffa9045]
<6>[ 0.005459] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff7b4f9]
<6>[ 0.005459] ACPI: Reserving SSDT table memory at [mem 0x6ff63000-0x6ff70815]
<6>[ 0.005460] ACPI: Reserving ASF! table memory at [mem 0x6ff62000-0x6ff62073]
<6>[ 0.005460] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff616df]
<6>[ 0.005460] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037]
<6>[ 0.005529] APIC: Switched APIC routing to: cluster x2apic
<6>[ 0.005734] No NUMA configuration found
<6>[ 0.005734] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff]
<6>[ 0.005739] NODE_DATA(0) allocated [mem 0x87f352fc0-0x87f37dfff]
<6>[ 0.005848] Zone ranges:
<6>[ 0.005849] DMA [mem 0x0000000000001000-0x0000000000ffffff]
<6>[ 0.005850] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
<6>[ 0.005851] Normal [mem 0x0000000100000000-0x000000087f7fffff]
<6>[ 0.005851] Device empty
<6>[ 0.005852] Movable zone start for each node
<6>[ 0.005853] Early memory node ranges
<6>[ 0.005853] node 0: [mem 0x0000000000001000-0x000000000009efff]
<6>[ 0.005854] node 0: [mem 0x0000000000100000-0x000000006cac0fff]
<6>[ 0.005854] node 0: [mem 0x000000006ffff000-0x000000006fffffff]
<6>[ 0.005855] node 0: [mem 0x0000000105400000-0x000000087f7fffff]
<6>[ 0.005856] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff]
<6>[ 0.005860] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[ 0.005878] On node 0, zone DMA: 97 pages in unavailable ranges
<6>[ 0.007912] On node 0, zone DMA32: 13630 pages in unavailable ranges
<6>[ 0.036476] On node 0, zone Normal: 21504 pages in unavailable ranges
<6>[ 0.036539] On node 0, zone Normal: 2048 pages in unavailable ranges
<6>[ 0.037012] ACPI: PM-Timer IO Port: 0x1808
<6>[ 0.037018] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
<6>[ 0.037066] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
<6>[ 0.037067] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[ 0.037069] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>[ 0.037071] ACPI: Using ACPI (MADT) for SMP configuration information
<6>[ 0.037072] ACPI: HPET id: 0x8086a701 base: 0xfed00000
<7>[ 0.037083] e820: update [mem 0x68f42000-0x68f5cfff] usable ==> reserved
<6>[ 0.037089] TSC deadline timer available
<6>[ 0.037091] CPU topo: Max. logical packages: 1
<6>[ 0.037091] CPU topo: Max. logical dies: 1
<6>[ 0.037091] CPU topo: Max. dies per package: 1
<6>[ 0.037093] CPU topo: Max. threads per core: 1
<6>[ 0.037094] CPU topo: Num. cores per package: 8
<6>[ 0.037094] CPU topo: Num. threads per package: 8
<6>[ 0.037094] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
<6>[ 0.037106] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[ 0.037108] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
<6>[ 0.037108] PM: hibernation: Registered nosave memory: [mem 0x68f42000-0x68f5cfff]
<6>[ 0.037109] PM: hibernation: Registered nosave memory: [mem 0x68f97000-0x68f97fff]
<6>[ 0.037110] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fe67fff]
<6>[ 0.037110] PM: hibernation: Registered nosave memory: [mem 0x6fe68000-0x6ff4ffff]
<6>[ 0.037111] PM: hibernation: Registered nosave memory: [mem 0x6ff50000-0x6fffefff]
<6>[ 0.037111] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff]
<6>[ 0.037112] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff]
<6>[ 0.037112] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
<6>[ 0.037112] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
<6>[ 0.037112] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x1053fffff]
<6>[ 0.037114] [mem 0x80800000-0xfed1ffff] available for PCI devices
<6>[ 0.037115] Booting paravirtualized kernel on bare hardware
<6>[ 0.037117] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
<6>[ 0.037125] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
<6>[ 0.037454] percpu: Embedded 91 pages/cpu s249856 r8192 d114688 u524288
<7>[ 0.037459] pcpu-alloc: s249856 r8192 d114688 u524288 alloc=1*2097152
<7>[ 0.037460] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7
<5>[ 0.037472] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,snd_hda_intel,ast ro
<5>[ 0.037550] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space.
<5>[ 0.037564] random: crng init done
<6>[ 0.039395] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
<6>[ 0.040303] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
<6>[ 0.040356] Fallback order for Node 0: 0
<6>[ 0.040359] Built 1 zonelists, mobility grouping on. Total pages: 8285792
<6>[ 0.040360] Policy zone: Normal
<6>[ 0.040369] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
<6>[ 0.040370] stackdepot: allocating hash table via alloc_large_system_hash
<6>[ 0.040371] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear)
<6>[ 0.041309] software IO TLB: area num 8.
<4>[ 0.086765] **********************************************************
<4>[ 0.086767] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.086767] ** **
<4>[ 0.086767] ** This system shows unhashed kernel memory addresses **
<4>[ 0.086767] ** via the console, logs, and other interfaces. This **
<4>[ 0.086767] ** might reduce the security of your system. **
<4>[ 0.086768] ** **
<4>[ 0.086768] ** If you see this message and you are not debugging **
<4>[ 0.086768] ** the kernel, report this immediately to your system **
<4>[ 0.086768] ** administrator! **
<4>[ 0.086768] ** **
<4>[ 0.086769] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.086769] **********************************************************
<6>[ 0.087835] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
<6>[ 0.088161] ftrace: allocating 59524 entries in 233 pages
<6>[ 0.113600] ftrace: allocated 233 pages with 5 groups
<6>[ 0.114781] Dynamic Preempt: voluntary
<6>[ 0.115231] Running RCU self tests
<6>[ 0.115232] Running RCU synchronous self tests
<6>[ 0.115232] rcu: Preemptible hierarchical RCU implementation.
<6>[ 0.115233] rcu: RCU lockdep checking is enabled.
<6>[ 0.115233] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
<6>[ 0.115234] Trampoline variant of Tasks RCU enabled.
<6>[ 0.115234] Rude variant of Tasks RCU enabled.
<6>[ 0.115234] Tracing variant of Tasks RCU enabled.
<6>[ 0.115234] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
<6>[ 0.115235] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
<6>[ 0.115274] Running RCU synchronous self tests
<6>[ 0.115278] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.115281] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.115283] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.125362] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
<6>[ 0.125818] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[ 0.126158] Console: colour dummy device 80x25
<6>[ 0.126166] printk: legacy console [tty0] enabled
<6>[ 0.127348] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<6>[ 0.127355] ... MAX_LOCKDEP_SUBCLASSES: 8
<6>[ 0.127359] ... MAX_LOCK_DEPTH: 48
<6>[ 0.127362] ... MAX_LOCKDEP_KEYS: 8192
<6>[ 0.127366] ... CLASSHASH_SIZE: 4096
<6>[ 0.127370] ... MAX_LOCKDEP_ENTRIES: 524288
<6>[ 0.127373] ... MAX_LOCKDEP_CHAINS: 524288
<6>[ 0.127377] ... CHAINHASH_SIZE: 262144
<6>[ 0.127381] memory used by lock dependency info: 54145 kB
<6>[ 0.127385] memory used for stack traces: 4224 kB
<6>[ 0.127389] per task-struct memory footprint: 1920 bytes
<6>[ 0.127438] ACPI: Core revision 20240827
<6>[ 0.128333] hpet: HPET dysfunctional in PC10. Force disabled.
<6>[ 0.128397] APIC: Switch to symmetric I/O mode setup
<6>[ 0.128403] DMAR: Host address width 38
<6>[ 0.128407] DMAR: DRHD base: 0x000000fc800000 flags: 0x0
<6>[ 0.128436] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 0.128466] DMAR: DRHD base: 0x000000fc810000 flags: 0x0
<6>[ 0.128488] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 0.128513] DMAR: DRHD base: 0x000000fc820000 flags: 0x1
<6>[ 0.128534] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda
<6>[ 0.128568] DMAR: SATC flags: 0x1
<6>[ 0.128576] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2
<6>[ 0.128581] DMAR-IR: HPET id 0 under DRHD base 0xfc820000
<6>[ 0.128586] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>[ 0.130638] DMAR-IR: Enabled IRQ remapping in x2apic mode
<6>[ 0.135750] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 0.135769] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400)
<6>[ 0.135843] CPU0: Thermal monitoring enabled (TM1)
<6>[ 0.135849] x86/cpu: User Mode Instruction Prevention (UMIP) activated
<6>[ 0.136027] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
<6>[ 0.136033] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
<6>[ 0.136043] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
<6>[ 0.136050] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
<6>[ 0.136055] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
<6>[ 0.136062] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
<6>[ 0.136068] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
<6>[ 0.136083] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
<6>[ 0.136090] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
<6>[ 0.136095] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
<6>[ 0.136101] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
<6>[ 0.136107] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
<6>[ 0.136114] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
<6>[ 0.136119] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
<6>[ 0.136125] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
<6>[ 0.136130] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
<6>[ 0.136763] Freeing SMP alternatives memory: 48K
<6>[ 0.136763] pid_max: default: 32768 minimum: 301
<6>[ 0.136763] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm
<6>[ 0.136763] landlock: Up and running.
<6>[ 0.136763] Yama: becoming mindful.
<6>[ 0.136763] AppArmor: AppArmor initialized
<6>[ 0.136763] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.136763] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.136763] Running RCU synchronous self tests
<6>[ 0.136763] Running RCU synchronous self tests
<6>[ 0.136763] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1)
<6>[ 0.136763] Running RCU Tasks wait API self tests
<6>[ 0.136763] Running RCU Tasks Rude wait API self tests
<6>[ 0.136763] Running RCU Tasks Trace wait API self tests
<6>[ 0.136763] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
<6>[ 0.136763] core: cpu_core PMU driver:
<6>[ 0.136763] ... version: 6
<6>[ 0.136763] ... bit width: 48
<6>[ 0.136763] ... generic registers: 10
<6>[ 0.136763] ... value mask: 0000ffffffffffff
<6>[ 0.136768] ... max period: 00007fffffffffff
<6>[ 0.136772] ... fixed-purpose events: 4
<6>[ 0.136776] ... event mask: 0001000f000003ff
<6>[ 0.136806] signal: max sigframe size: 3632
<6>[ 0.136828] Estimated ratio of average max frequency by base frequency (times 1024): 1189
<6>[ 0.136912] rcu: Hierarchical SRCU implementation.
<6>[ 0.136917] rcu: Max phase no-delay instances is 400.
<6>[ 0.137834] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
<6>[ 0.139641] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
<6>[ 0.139916] smp: Bringing up secondary CPUs ...
<6>[ 0.140260] smpboot: x86: Booting SMP configuration:
<6>[ 0.140266] .... node #0, CPUs: #1 #2
<6>[ 0.142885] Callback from call_rcu_tasks_trace() invoked.
<4>[ 0.145845] #3 #4 #5 #6 #7
<6>[ 0.010762] core: cpu_atom PMU driver:
<6>[ 0.010762] ... version: 6
<6>[ 0.010762] ... bit width: 48
<6>[ 0.010762] ... generic registers: 8
<6>[ 0.010762] ... value mask: 0000ffffffffffff
<6>[ 0.010762] ... max period: 00007fffffffffff
<6>[ 0.010762] ... fixed-purpose events: 6
<6>[ 0.010762] ... event mask: 00000077000000ff
<6>[ 0.154901] smp: Brought up 1 node, 8 CPUs
<6>[ 0.156048] smpboot: Total of 8 processors activated (49766.40 BogoMIPS)
<6>[ 0.158038] Memory: 32345316K/33143168K available (24514K kernel code, 5579K rwdata, 9272K rodata, 5632K init, 68400K bss, 775236K reserved, 0K cma-reserved)
<6>[ 0.159842] devtmpfs: initialized
<6>[ 0.160030] x86/mm: Memory block size: 128MB
<6>[ 0.175839] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes)
<6>[ 0.176261] Running RCU synchronous self tests
<6>[ 0.176275] Running RCU synchronous self tests
<6>[ 0.176292] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[ 0.176292] futex hash table entries: 2048 (order: 6, 262144 bytes, linear)
<6>[ 0.177027] pinctrl core: initialized pinctrl subsystem
<6>[ 0.177527] PM: RTC time: 07:39:58, date: 2025-03-01
<6>[ 0.178455] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[ 0.179649] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
<6>[ 0.179947] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[ 0.180219] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[ 0.180277] audit: initializing netlink subsys (disabled)
<5>[ 0.180315] audit: type=2000 audit(1740814798.044:1): state=initialized audit_enabled=0 res=1
<6>[ 0.181325] thermal_sys: Registered thermal governor 'fair_share'
<6>[ 0.181327] thermal_sys: Registered thermal governor 'bang_bang'
<6>[ 0.181333] thermal_sys: Registered thermal governor 'step_wise'
<6>[ 0.181338] thermal_sys: Registered thermal governor 'user_space'
<6>[ 0.181342] thermal_sys: Registered thermal governor 'power_allocator'
<6>[ 0.181385] EISA bus registered
<6>[ 0.181413] cpuidle: using governor ladder
<6>[ 0.181413] cpuidle: using governor menu
<6>[ 0.181843] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[ 0.182214] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
<6>[ 0.182242] PCI: Using configuration type 1 for base access
<6>[ 0.182385] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
<6>[ 0.183949] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
<6>[ 0.183949] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
<6>[ 0.183949] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
<6>[ 0.183949] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
<6>[ 0.203765] raid6: avx2x4 gen() 77312 MB/s
<6>[ 0.220764] raid6: avx2x2 gen() 82880 MB/s
<6>[ 0.237765] raid6: avx2x1 gen() 70819 MB/s
<6>[ 0.237770] raid6: using algorithm avx2x2 gen() 82880 MB/s
<6>[ 0.254765] raid6: .... xor() 52958 MB/s, rmw enabled
<6>[ 0.254770] raid6: using avx2x2 recovery algorithm
<6>[ 0.258046] fbcon: Taking over console
<6>[ 0.259324] ACPI: Added _OSI(Module Device)
<6>[ 0.259377] ACPI: Added _OSI(Processor Device)
<6>[ 0.259421] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[ 0.259465] ACPI: Added _OSI(Processor Aggregator Device)
<6>[ 0.628881] ACPI: 31 ACPI AML tables successfully acquired and loaded
<6>[ 0.642140] ACPI: EC: EC started
<6>[ 0.642152] ACPI: EC: interrupt blocked
<6>[ 0.644511] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 0.644516] ACPI: EC: Boot ECDT EC used to handle transactions
<6>[ 0.680797] Callback from call_rcu_tasks() invoked.
<6>[ 0.925850] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 0.925864] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 0.991763] ACPI: Interpreter enabled
<6>[ 0.993239] ACPI: PM: (supports S0 S4 S5)
<6>[ 0.993251] ACPI: Using IOAPIC for interrupt routing
<6>[ 1.003613] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[ 1.003629] PCI: Ignoring E820 reservations for host bridge windows
<6>[ 1.033317] ACPI: Enabled 10 GPEs in block 00 to 7F
<6>[ 1.033390] ACPI: Enabled 13 GPEs in block 80 to DF
<6>[ 1.121522] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource
<6>[ 1.121805] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource
<6>[ 1.124766] ACPI: \_SB_.PC00.PAUD: New power resource
<6>[ 1.506116] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
<6>[ 1.526763] ACPI: \_SB_.PC00.RP02.PXP_: New power resource
<6>[ 1.683883] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource
<6>[ 1.686956] ACPI: \_SB_.PC00.RP04.PXP_: New power resource
<6>[ 1.699823] ACPI: \_SB_.PC00.RP05.PXP_: New power resource
<6>[ 1.718465] ACPI: \_SB_.PC00.TBT0: New power resource
<6>[ 1.718728] ACPI: \_SB_.PC00.TBT1: New power resource
<6>[ 1.718975] ACPI: \_SB_.PC00.D3C_: New power resource
<3>[ 1.772085] ACPI: \: Can't tag data node
<3>[ 1.773603] ACPI: \: Can't tag data node
<3>[ 1.774750] ACPI: \: Can't tag data node
<3>[ 1.775794] ACPI: \: Can't tag data node
<3>[ 1.777253] ACPI: \: Can't tag data node
<6>[ 1.972409] ACPI: \_TZ_.FN00: New power resource
<6>[ 1.973593] ACPI: \_TZ_.FN01: New power resource
<6>[ 1.974737] ACPI: \_TZ_.FN02: New power resource
<6>[ 1.976776] ACPI: \_TZ_.FN03: New power resource
<6>[ 1.977773] ACPI: \_TZ_.FN04: New power resource
<6>[ 1.980665] ACPI: \PIN_: New power resource
<6>[ 1.988884] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
<6>[ 1.988917] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
<6>[ 1.996724] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC]
<6>[ 2.020873] PCI host bridge to bus 0000:00
<6>[ 2.020953] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
<6>[ 2.020973] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
<6>[ 2.020991] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[ 2.021011] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window]
<6>[ 2.021030] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window]
<6>[ 2.021052] pci_bus 0000:00: root bus resource [bus 00-fe]
<6>[ 2.029815] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint
<6>[ 2.031347] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
<6>[ 2.031774] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref]
<6>[ 2.031774] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref]
<6>[ 2.031774] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref]
<6>[ 2.031774] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6>[ 2.035302] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint
<6>[ 2.035373] pci 0000:00:04.0: BAR 0 [mem 0x3815c00000-0x3815c1ffff 64bit]
<6>[ 2.038913] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint
<6>[ 2.038985] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit]
<6>[ 2.039006] pci 0000:00:05.0: BAR 4 [mem 0x3815c7b000-0x3815c7bfff 64bit]
<6>[ 2.042135] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port
<6>[ 2.042222] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 2.042247] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 2.042285] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 2.042538] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<6>[ 2.042633] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
<6>[ 2.053682] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port
<6>[ 2.053761] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 2.053777] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 2.053810] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 2.054011] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
<6>[ 2.054080] pci 0000:00:07.1: PTM enabled (root), 4ns granularity
<6>[ 2.064126] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port
<6>[ 2.064204] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 2.064226] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 2.064258] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 2.064451] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold
<6>[ 2.064527] pci 0000:00:07.2: PTM enabled (root), 4ns granularity
<6>[ 2.074372] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
<6>[ 2.074439] pci 0000:00:0a.0: BAR 0 [mem 0x3815c50000-0x3815c5ffff 64bit]
<6>[ 2.074467] pci 0000:00:0a.0: enabling Extended Tags
<6>[ 2.075188] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint
<6>[ 2.075247] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit]
<6>[ 2.075264] pci 0000:00:0b.0: BAR 4 [mem 0x3815c7a000-0x3815c7afff 64bit]
<6>[ 2.076119] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 2.076210] pci 0000:00:0d.0: BAR 0 [mem 0x3815c40000-0x3815c4ffff 64bit]
<6>[ 2.076334] pci 0000:00:0d.0: PME# supported from D3hot D3cold
<6>[ 2.080266] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 2.080359] pci 0000:00:0d.2: BAR 0 [mem 0x3815bc0000-0x3815bfffff 64bit]
<6>[ 2.080376] pci 0000:00:0d.2: BAR 2 [mem 0x3815c79000-0x3815c79fff 64bit]
<6>[ 2.080482] pci 0000:00:0d.2: supports D1 D2
<6>[ 2.080491] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.083486] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 2.083578] pci 0000:00:0d.3: BAR 0 [mem 0x3815b80000-0x3815bbffff 64bit]
<6>[ 2.083594] pci 0000:00:0d.3: BAR 2 [mem 0x3815c78000-0x3815c78fff 64bit]
<6>[ 2.083701] pci 0000:00:0d.3: supports D1 D2
<6>[ 2.083710] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.086576] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint
<6>[ 2.086671] pci 0000:00:12.0: BAR 0 [mem 0x3815c30000-0x3815c3ffff 64bit]
<6>[ 2.086840] pci 0000:00:12.0: PME# supported from D0 D3hot
<6>[ 2.092740] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint
<6>[ 2.092887] pci 0000:00:13.0: BAR 0 [mem 0x3815c77000-0x3815c77fff 64bit]
<6>[ 2.093050] pci 0000:00:13.0: PME# supported from D3hot
<6>[ 2.093942] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 2.094035] pci 0000:00:14.0: BAR 0 [mem 0x3815c20000-0x3815c2ffff 64bit]
<6>[ 2.094155] pci 0000:00:14.0: PME# supported from D3hot D3cold
<6>[ 2.098677] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint
<6>[ 2.098833] pci 0000:00:14.2: BAR 0 [mem 0x3815c68000-0x3815c6ffff 64bit]
<6>[ 2.098851] pci 0000:00:14.2: BAR 2 [mem 0x3815c76000-0x3815c76fff 64bit]
<6>[ 2.099584] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.099880] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.103216] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.103489] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.106516] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.106861] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.110149] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.110421] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.113574] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint
<6>[ 2.113719] pci 0000:00:16.0: BAR 0 [mem 0x3815c71000-0x3815c71fff 64bit]
<6>[ 2.113885] pci 0000:00:16.0: PME# supported from D3hot
<6>[ 2.119526] pci 0000:00:16.3: [8086:a873] type 00 class 0x070002 conventional PCI endpoint
<6>[ 2.119637] pci 0000:00:16.3: BAR 0 [io 0x4020-0x4027]
<6>[ 2.119650] pci 0000:00:16.3: BAR 1 [mem 0x94421000-0x94421fff]
<6>[ 2.120166] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port
<6>[ 2.120227] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 2.120242] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 2.120257] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 2.120458] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>[ 2.120536] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
<6>[ 2.129763] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port
<6>[ 2.129763] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 2.129763] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 2.129763] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
<6>[ 2.129763] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
<6>[ 2.143563] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint
<6>[ 2.146557] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint
<6>[ 2.146840] pci 0000:00:1f.3: BAR 0 [mem 0x3815b00000-0x3815b7ffff 64bit]
<6>[ 2.146877] pci 0000:00:1f.3: BAR 4 [mem 0x3815800000-0x38159fffff 64bit]
<6>[ 2.147109] pci 0000:00:1f.3: PME# supported from D3hot D3cold
<6>[ 2.148351] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint
<6>[ 2.148521] pci 0000:00:1f.4: BAR 0 [mem 0x3815c70000-0x3815c700ff 64bit]
<6>[ 2.148547] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf]
<6>[ 2.152133] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.152262] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
<6>[ 2.152832] pci 0000:00:1f.6: [8086:550e] type 00 class 0x020000 conventional PCI endpoint
<6>[ 2.152943] pci 0000:00:1f.6: BAR 0 [mem 0x94400000-0x9441ffff]
<6>[ 2.153072] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
<6>[ 2.156218] pci 0000:00:1f.7: [8086:a824] type 00 class 0x130000 conventional PCI endpoint
<6>[ 2.156319] pci 0000:00:1f.7: BAR 0 [mem 0x3815a00000-0x3815afffff 64bit]
<6>[ 2.156337] pci 0000:00:1f.7: BAR 2 [mem 0x3815000000-0x38157fffff 64bit]
<6>[ 2.156355] pci 0000:00:1f.7: BAR 4 [mem 0x3815c60000-0x3815c67fff 64bit]
<6>[ 2.157049] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 2.157405] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 2.157749] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 2.158141] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint
<6>[ 2.158255] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff]
<6>[ 2.158275] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit]
<6>[ 2.158294] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit]
<6>[ 2.158558] pci 0000:7f:00.0: supports D1 D2
<6>[ 2.158568] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.159864] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 2.162059] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 2.162732] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint
<6>[ 2.162903] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit]
<6>[ 2.164254] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 2.164375] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 2.603502] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1)
<6>[ 12.499210] Low-power S0 idle used by default for system suspend
<6>[ 12.551635] ACPI: EC: interrupt unblocked
<6>[ 12.551646] ACPI: EC: event unblocked
<6>[ 12.551679] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 12.551685] ACPI: EC: GPE=0x6e
<6>[ 12.551692] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete
<6>[ 12.551700] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
<6>[ 12.552870] iommu: Default domain type: Translated
<6>[ 12.552876] iommu: DMA domain TLB invalidation policy: lazy mode
<5>[ 12.554549] SCSI subsystem initialized
<7>[ 12.554817] libata version 3.00 loaded.
<6>[ 12.554922] ACPI: bus type USB registered
<6>[ 12.555207] usbcore: registered new interface driver usbfs
<6>[ 12.555243] usbcore: registered new interface driver hub
<6>[ 12.555282] usbcore: registered new device driver usb
<6>[ 12.555404] pps_core: LinuxPPS API ver. 1 registered
<6>[ 12.555408] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[ 12.555427] PTP clock support registered
<6>[ 12.556012] EDAC MC: Ver: 3.0.0
<6>[ 12.561002] efivars: Registered efivars operations
<6>[ 12.563770] NetLabel: Initializing
<6>[ 12.563783] NetLabel: domain hash size = 128
<6>[ 12.563794] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
<6>[ 12.563955] NetLabel: unlabeled traffic allowed by default
<6>[ 12.563993] mctp: management component transport protocol core
<6>[ 12.564005] NET: Registered PF_MCTP protocol family
<6>[ 12.564087] PCI: Using ACPI for IRQ routing
<7>[ 12.598863] PCI: pci_cache_line_size set to 64 bytes
<6>[ 12.599178] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
<7>[ 12.599369] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
<7>[ 12.599388] e820: reserve RAM buffer [mem 0x68f42000-0x6bffffff]
<7>[ 12.599396] e820: reserve RAM buffer [mem 0x68f97000-0x6bffffff]
<7>[ 12.599402] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff]
<7>[ 12.599408] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff]
<6>[ 12.600828] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6>[ 12.600851] pci 0000:00:02.0: vgaarb: bridge control possible
<6>[ 12.600862] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
<6>[ 12.600862] vgaarb: loaded
<6>[ 12.601793] clocksource: Switched to clocksource tsc-early
<5>[ 12.604117] VFS: Disk quotas dquot_6.6.0
<6>[ 12.604167] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[ 12.606250] AppArmor: AppArmor Filesystem Enabled
<6>[ 12.606589] pnp: PnP ACPI init
<6>[ 12.608511] system 00:00: [io 0x0680-0x069f] has been reserved
<6>[ 12.608534] system 00:00: [io 0x164e-0x164f] has been reserved
<6>[ 12.611583] system 00:02: [io 0x06a4] has been reserved
<6>[ 12.611604] system 00:02: [io 0x06a0] has been reserved
<6>[ 12.662384] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
<6>[ 12.662411] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved
<6>[ 12.662442] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved
<6>[ 12.662463] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved
<6>[ 12.662483] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved
<6>[ 12.662510] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved
<6>[ 12.662534] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
<6>[ 12.662555] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
<6>[ 12.670988] system 00:04: [io 0x2000-0x20fe] has been reserved
<6>[ 12.675053] system 00:06: [io 0x1854-0x1857] has been reserved
<6>[ 12.675329] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved
<6>[ 12.684033] pnp: PnP ACPI: found 8 devices
<6>[ 12.698810] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<6>[ 12.699185] NET: Registered PF_INET protocol family
<6>[ 12.699490] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 12.703078] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear)
<6>[ 12.703414] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[ 12.703743] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 12.705077] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage)
<6>[ 12.707204] TCP: Hash tables configured (established 262144 bind 65536)
<6>[ 12.707887] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 12.709516] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 12.711193] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[ 12.711310] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000
<6>[ 12.711329] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000
<6>[ 12.711345] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000
<6>[ 12.711413] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]: assigned
<6>[ 12.711423] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff]: assigned
<6>[ 12.711432] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff]: assigned
<6>[ 12.711443] pci 0000:00:15.0: BAR 0 [mem 0x3815c72000-0x3815c72fff 64bit]: assigned
<6>[ 12.711496] pci 0000:00:15.1: BAR 0 [mem 0x3815c73000-0x3815c73fff 64bit]: assigned
<6>[ 12.711550] pci 0000:00:15.2: BAR 0 [mem 0x3815c74000-0x3815c74fff 64bit]: assigned
<6>[ 12.711604] pci 0000:00:15.3: BAR 0 [mem 0x3815c75000-0x3815c75fff 64bit]: assigned
<6>[ 12.711656] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned
<6>[ 12.711705] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 12.711719] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]
<6>[ 12.711731] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 12.711742] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 12.711771] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 12.711779] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff]
<6>[ 12.711791] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 12.711802] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 12.711817] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 12.711826] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff]
<6>[ 12.711837] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 12.711849] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 12.711865] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 12.711873] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 12.711884] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 12.711898] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 12.711937] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 12.711982] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
<6>[ 12.711990] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
<6>[ 12.711998] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[ 12.712007] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window]
<6>[ 12.712016] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window]
<6>[ 12.712026] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
<6>[ 12.712033] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff]
<6>[ 12.712041] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 12.712051] pci_bus 0000:2b: resource 0 [io 0x6000-0x6fff]
<6>[ 12.712059] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff]
<6>[ 12.712067] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 12.712077] pci_bus 0000:55: resource 0 [io 0x7000-0x7fff]
<6>[ 12.712084] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff]
<6>[ 12.712092] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 12.712102] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff]
<6>[ 12.712110] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff]
<6>[ 12.712118] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff]
<6>[ 12.713521] pci 0000:00:0d.0: enabling device (0000 -> 0002)
<6>[ 12.715799] PCI: CLS 0 bytes, default 64
<6>[ 12.715946] DMAR: No RMRR found
<6>[ 12.715962] DMAR: No ATSR found
<6>[ 12.715968] DMAR: dmar1: Using Queued invalidation
<6>[ 12.715993] DMAR: dmar0: Using Queued invalidation
<6>[ 12.716006] DMAR: dmar2: Using Queued invalidation
<6>[ 12.717166] pci 0000:00:04.0: Adding to iommu group 0
<6>[ 12.717272] pci 0000:00:05.0: Adding to iommu group 1
<6>[ 12.717364] pci 0000:00:0a.0: Adding to iommu group 2
<6>[ 12.717442] pci 0000:00:0b.0: Adding to iommu group 3
<6>[ 12.721859] pci 0000:00:02.0: Adding to iommu group 4
<6>[ 12.723553] pci 0000:00:00.0: Adding to iommu group 5
<6>[ 12.723649] pci 0000:00:07.0: Adding to iommu group 6
<6>[ 12.723734] pci 0000:00:07.1: Adding to iommu group 7
<6>[ 12.723832] pci 0000:00:07.2: Adding to iommu group 8
<6>[ 12.723946] pci 0000:00:0d.0: Adding to iommu group 9
<6>[ 12.724003] pci 0000:00:0d.2: Adding to iommu group 9
<6>[ 12.724059] pci 0000:00:0d.3: Adding to iommu group 9
<6>[ 12.724151] pci 0000:00:12.0: Adding to iommu group 10
<6>[ 12.724234] pci 0000:00:13.0: Adding to iommu group 11
<6>[ 12.724336] pci 0000:00:14.0: Adding to iommu group 12
<6>[ 12.724393] pci 0000:00:14.2: Adding to iommu group 12
<6>[ 12.724513] pci 0000:00:15.0: Adding to iommu group 13
<6>[ 12.724572] pci 0000:00:15.1: Adding to iommu group 13
<6>[ 12.724638] pci 0000:00:15.2: Adding to iommu group 13
<6>[ 12.724695] pci 0000:00:15.3: Adding to iommu group 13
<6>[ 12.725098] pci 0000:00:16.0: Adding to iommu group 14
<6>[ 12.725159] pci 0000:00:16.3: Adding to iommu group 14
<6>[ 12.725237] pci 0000:00:1c.0: Adding to iommu group 15
<6>[ 12.725335] pci 0000:00:1c.4: Adding to iommu group 16
<6>[ 12.725479] pci 0000:00:1f.0: Adding to iommu group 17
<6>[ 12.725539] pci 0000:00:1f.3: Adding to iommu group 17
<6>[ 12.725598] pci 0000:00:1f.4: Adding to iommu group 17
<6>[ 12.725657] pci 0000:00:1f.5: Adding to iommu group 17
<6>[ 12.725717] pci 0000:00:1f.6: Adding to iommu group 17
<6>[ 12.725786] pci 0000:00:1f.7: Adding to iommu group 17
<6>[ 12.725869] pci 0000:7f:00.0: Adding to iommu group 18
<6>[ 12.725970] pci 0000:80:00.0: Adding to iommu group 19
<6>[ 12.739783] DMAR: Intel(R) Virtualization Technology for Directed I/O
<6>[ 12.739803] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[ 12.739811] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB)
<6>[ 12.747798] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 12.748023] clocksource: Switched to clocksource tsc
<6>[ 12.748178] platform rtc_cmos: registered platform RTC device (no PNP device found)
<5>[ 12.753646] Initialise system trusted keyrings
<5>[ 12.753773] Key type blacklist registered
<6>[ 12.754150] workingset: timestamp_bits=36 max_order=23 bucket_order=0
<6>[ 12.765315] zbud: loaded
<6>[ 12.766881] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 12.767030] ntfs3: Enabled Linux POSIX ACLs support
<6>[ 12.767037] ntfs3: Read-only LZX/Xpress compression included
<5>[ 12.767555] integrity: Platform Keyring initialized
<5>[ 12.767581] integrity: Machine keyring initialized
<6>[ 12.773898] xor: automatically using best checksumming function avx
<5>[ 12.773911] Key type asymmetric registered
<5>[ 12.773925] Asymmetric key parser 'x509' registered
<6>[ 12.774063] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
<6>[ 12.774583] io scheduler mq-deadline registered
<6>[ 12.775694] ledtrig-cpu: registered to indicate activity on CPUs
<6>[ 12.777456] pcieport 0000:00:07.0: PME: Signaling with IRQ 126
<6>[ 12.778036] pcieport 0000:00:07.0: AER: enabled with IRQ 126
<6>[ 12.779313] pcieport 0000:00:07.1: PME: Signaling with IRQ 127
<6>[ 12.779845] pcieport 0000:00:07.1: AER: enabled with IRQ 127
<6>[ 12.781082] pcieport 0000:00:07.2: PME: Signaling with IRQ 128
<6>[ 12.781595] pcieport 0000:00:07.2: AER: enabled with IRQ 128
<6>[ 12.782737] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129
<6>[ 12.783231] pcieport 0000:00:1c.0: AER: enabled with IRQ 129
<6>[ 12.784762] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130
<6>[ 12.785286] pcieport 0000:00:1c.4: AER: enabled with IRQ 130
<6>[ 12.785900] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<7>[ 12.788811] Monitor-Mwait will be used to enter C-1 state
<7>[ 12.788952] Monitor-Mwait will be used to enter C-2 state
<7>[ 12.789010] Monitor-Mwait will be used to enter C-3 state
<6>[ 12.794383] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0
<6>[ 12.794591] ACPI: button: Lid Switch [LID0]
<6>[ 12.794865] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
<6>[ 12.795048] ACPI: button: Sleep Button [SLPB]
<6>[ 12.795259] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
<6>[ 12.795686] ACPI: button: Power Button [PWRB]
<4>[ 12.813199] ACPI Warning: \_SB.PR00._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 12.820685] ACPI Warning: \_SB.PR01._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 12.829003] ACPI Warning: \_SB.PR02._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 12.837785] ACPI Warning: \_SB.PR03._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 12.845977] ACPI Warning: \_SB.PR04._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 12.853972] ACPI Warning: \_SB.PR05._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 12.861811] ACPI Warning: \_SB.PR06._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 12.869250] ACPI Warning: \_SB.PR07._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<6>[ 12.958070] thermal LNXTHERM:00: registered as thermal_zone0
<6>[ 12.958088] ACPI: thermal: Thermal Zone [TZ00] (55 C)
<6>[ 12.959534] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[ 12.960058] ACPI: battery: Slot [BAT1] (battery absent)
<6>[ 12.960515] ACPI: battery: Slot [BAT0] (battery present)
<6>[ 12.982460] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
<6>[ 12.996136] serial 0000:00:12.0: enabling device (0000 -> 0002)
<6>[ 12.997951] serial 0000:00:16.3: enabling device (0001 -> 0003)
<6>[ 13.020841] 0000:00:16.3: ttyS4 at I/O 0x4020 (irq = 19, base_baud = 115200) is a 16550A
<4>[ 13.022455] hpet_acpi_add: no address or irqs in _CRS
<6>[ 13.022609] Linux agpgart interface v0.103
<6>[ 13.023274] ACPI: bus type drm_connector registered
<6>[ 13.039435] loop: module loaded
<6>[ 13.084846] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
<6>[ 13.223871] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
<6>[ 13.409889] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
<6>[ 13.576783] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
<5>[ 13.689986] Key type psk registered
<6>[ 13.695694] nvme 0000:80:00.0: platform quirk: setting simple suspend
<6>[ 13.696866] nvme nvme0: pci function 0000:80:00.0
<6>[ 13.697232] tun: Universal TUN/TAP device driver, 1.6
<6>[ 13.698824] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 13.699095] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
<6>[ 13.701076] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 13.703208] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 13.703250] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
<6>[ 13.703279] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 13.703877] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 13.703916] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 13.703929] usb usb1: Product: xHCI Host Controller
<6>[ 13.703939] usb usb1: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[ 13.703950] usb usb1: SerialNumber: 0000:00:0d.0
<6>[ 13.705793] hub 1-0:1.0: USB hub found
<6>[ 13.705925] hub 1-0:1.0: 1 port detected
<6>[ 13.711622] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 13.711641] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 13.711654] usb usb2: Product: xHCI Host Controller
<6>[ 13.711662] usb usb2: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[ 13.711673] usb usb2: SerialNumber: 0000:00:0d.0
<6>[ 13.712457] hub 2-0:1.0: USB hub found
<6>[ 13.712507] hub 2-0:1.0: 3 ports detected
<6>[ 13.734940] nvme nvme0: 8/0/0 default/read/poll queues
<6>[ 13.742582] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 13.742634] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
<6>[ 13.745092] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 13.747802] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 13.747841] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
<6>[ 13.747872] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 13.748262] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 13.748284] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 13.748302] usb usb3: Product: xHCI Host Controller
<6>[ 13.748314] usb usb3: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[ 13.748329] usb usb3: SerialNumber: 0000:00:14.0
<6>[ 13.750470] hub 3-0:1.0: USB hub found
<6>[ 13.750571] hub 3-0:1.0: 8 ports detected
<6>[ 13.751217] nvme0n1: p1 p2
<6>[ 13.803230] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 13.803259] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 13.803277] usb usb4: Product: xHCI Host Controller
<6>[ 13.803289] usb usb4: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[ 13.803303] usb usb4: SerialNumber: 0000:00:14.0
<6>[ 13.804681] hub 4-0:1.0: USB hub found
<6>[ 13.804750] hub 4-0:1.0: 2 ports detected
<6>[ 13.816503] usbcore: registered new interface driver usb-storage
<6>[ 13.816712] usbcore: registered new interface driver usbserial_generic
<6>[ 13.816855] usbserial: USB Serial support registered for generic
<6>[ 13.816940] usbcore: registered new interface driver ftdi_sio
<6>[ 13.817003] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[ 13.817083] usbcore: registered new interface driver pl2303
<6>[ 13.817138] usbserial: USB Serial support registered for pl2303
<6>[ 13.817346] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>[ 13.817362] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<3>[ 14.533099] i8042: Can't read CTR while initializing i8042
<3>[ 14.533117] i8042 i8042: probe with driver i8042 failed with error -5
<6>[ 14.536049] mousedev: PS/2 mouse device common for all mice
<6>[ 14.538426] rtc_cmos rtc_cmos: RTC can wake from S4
<6>[ 14.541071] rtc_cmos rtc_cmos: registered as rtc0
<6>[ 14.541337] rtc_cmos rtc_cmos: setting system clock to 2025-03-01T07:40:12 UTC (1740814812)
<6>[ 14.541600] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
<6>[ 14.541683] i2c_dev: i2c /dev entries driver
<6>[ 14.552366] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0)
<6>[ 14.552467] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
<4>[ 14.552536] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
<6>[ 14.552758] device-mapper: uevent: version 1.0.3
<6>[ 14.554479] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
<6>[ 14.555325] platform eisa.0: Probing EISA bus 0
<4>[ 14.555402] platform eisa.0: EISA: Cannot allocate resource for mainboard
<4>[ 14.555493] platform eisa.0: Cannot allocate resource for EISA slot 1
<4>[ 14.555576] platform eisa.0: Cannot allocate resource for EISA slot 2
<4>[ 14.555656] platform eisa.0: Cannot allocate resource for EISA slot 3
<4>[ 14.555734] platform eisa.0: Cannot allocate resource for EISA slot 4
<4>[ 14.555844] platform eisa.0: Cannot allocate resource for EISA slot 5
<4>[ 14.555924] platform eisa.0: Cannot allocate resource for EISA slot 6
<4>[ 14.556007] platform eisa.0: Cannot allocate resource for EISA slot 7
<4>[ 14.556086] platform eisa.0: Cannot allocate resource for EISA slot 8
<6>[ 14.556151] platform eisa.0: EISA: Detected 0 cards
<6>[ 14.556205] intel_pstate: Intel P-state driver initializing
<6>[ 14.563089] Hybrid CPU capacity scaling enabled
<6>[ 14.564721] intel_pstate: HWP enabled
<6>[ 14.564729] sdhci: Secure Digital Host Controller Interface driver
<6>[ 14.564738] sdhci: Copyright(c) Pierre Ossman
<6>[ 14.564873] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 14.567000] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c]
<6>[ 14.567651] drop_monitor: Initializing network drop monitor service
<6>[ 14.567833] NET: Registered PF_INET6 protocol family
<6>[ 14.570380] Segment Routing with IPv6
<6>[ 14.570430] In-situ OAM (IOAM) with IPv6
<6>[ 14.570480] NET: Registered PF_PACKET protocol family
<5>[ 14.570645] Key type dns_resolver registered
<4>[ 14.573610] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<6>[ 14.574141] microcode: Current revision: 0x0000011b
<6>[ 14.574657] IPI shorthand broadcast: enabled
<6>[ 14.588107] sched_clock: Marking stable (14578001647, 9762646)->(14660978617, -73214324)
<6>[ 14.588851] registered taskstats version 1
<5>[ 14.589881] Loading compiled-in X.509 certificates
<6>[ 14.618514] Demotion targets for Node 0: null
<6>[ 14.618730] kmemleak: Kernel memory leak detector initialized (mem pool available: 14949)
<6>[ 14.618733] kmemleak: Automatic memory scanning thread started
<5>[ 14.618977] Key type .fscrypt registered
<5>[ 14.618984] Key type fscrypt-provisioning registered
<6>[ 14.621614] Btrfs loaded, zoned=yes, fsverity=yes
<5>[ 14.623320] Key type encrypted registered
<6>[ 14.623331] AppArmor: AppArmor sha256 policy hashing enabled
<6>[ 14.623416] ima: No TPM chip found, activating TPM-bypass!
<5>[ 14.623432] Loading compiled-in module X.509 certificates
<5>[ 14.624211] Loaded X.509 cert 'Build time autogenerated kernel key: 66883c5dab39cf35db4b6c70747f8eb3b62ebf1d'
<6>[ 14.624225] ima: Allocated hash algorithm: sha256
<6>[ 14.624266] ima: No architecture policies found
<6>[ 14.624366] evm: Initialising EVM extended attributes:
<6>[ 14.624370] evm: security.selinux
<6>[ 14.624373] evm: security.SMACK64
<6>[ 14.624376] evm: security.SMACK64EXEC
<6>[ 14.624379] evm: security.SMACK64TRANSMUTE
<6>[ 14.624382] evm: security.SMACK64MMAP
<6>[ 14.624385] evm: security.apparmor
<6>[ 14.624388] evm: security.ima
<6>[ 14.624390] evm: security.capability
<6>[ 14.624393] evm: HMAC attrs: 0x1
<6>[ 14.626501] PM: Magic number: 1:927:671
<6>[ 14.626779] printk: legacy console [netcon0] enabled
<6>[ 14.626785] netconsole: network logging started
<6>[ 14.627287] RAS: Correctable Errors collector initialized.
<6>[ 14.627793] clk: Disabling unused clocks
<6>[ 14.627810] PM: genpd: Disabling unused power domains
<6>[ 14.628284] md: Waiting for all devices to be available before autodetect
<6>[ 14.628291] md: If you don't use raid, use raid=noautodetect
<6>[ 14.628296] md: Autodetecting RAID arrays.
<6>[ 14.628304] md: autorun ...
<6>[ 14.628307] md: ... autorun DONE.
<6>[ 14.672519] EXT4-fs (nvme0n1p2): mounted filesystem ae92fef7-5a02-4ec6-9d86-98e4e30b66f8 ro with ordered data mode. Quota mode: none.
<6>[ 14.672586] VFS: Mounted root (ext4 filesystem) readonly on device 259:2.
<6>[ 14.673317] devtmpfs: mounted
<6>[ 14.683813] Freeing unused decrypted memory: 2028K
<6>[ 14.684693] Freeing unused kernel image (initmem) memory: 5632K
<6>[ 14.684715] Write protecting the kernel read-only data: 34816k
<6>[ 14.685109] Freeing unused kernel image (text/rodata gap) memory: 60K
<6>[ 14.685429] Freeing unused kernel image (rodata/data gap) memory: 968K
<6>[ 14.689912] x86/mm: Checked W+X mappings: passed, no W+X pages found.
<6>[ 14.690577] Run /sbin/init as init process
<7>[ 14.690582] with arguments:
<7>[ 14.690583] /sbin/init
<7>[ 14.690584] with environment:
<7>[ 14.690584] HOME=/
<7>[ 14.690585] TERM=linux
<7>[ 14.690586] BOOT_IMAGE=/boot/drm_intel
<7>[ 14.736322] systemd[1]: Inserted module 'autofs4'
<7>[ 14.754220] systemd[1]: systemd 255.4-1ubuntu8.5 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
<7>[ 14.754262] systemd[1]: Detected architecture x86-64.
<7>[ 14.755355] systemd[1]: Hostname set to <shard-lnl-1>.
<7>[ 15.062960] systemd[1]: Queued start job for default target graphical.target.
<7>[ 15.101376] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
<7>[ 15.103682] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
<7>[ 15.105142] systemd[1]: Created slice user.slice - User and Session Slice.
<7>[ 15.105380] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
<7>[ 15.105997] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
<7>[ 15.106114] systemd[1]: Expecting device dev-disk-by\x2duuid-47B0\x2dB6FF.device - /dev/disk/by-uuid/47B0-B6FF...
<7>[ 15.106204] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
<7>[ 15.106284] systemd[1]: Reached target slices.target - Slice Units.
<7>[ 15.106349] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
<7>[ 15.106413] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
<7>[ 15.106480] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
<7>[ 15.106723] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
<7>[ 15.107351] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
<7>[ 15.107659] systemd[1]: Listening on multipathd.socket - multipathd control socket.
<7>[ 15.107999] systemd[1]: Listening on syslog.socket - Syslog Socket.
<7>[ 15.108254] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
<7>[ 15.108451] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
<7>[ 15.108832] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
<7>[ 15.109158] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
<7>[ 15.109424] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
<7>[ 15.109604] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 15.109884] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
<7>[ 15.110143] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
<7>[ 15.134415] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
<7>[ 15.140029] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
<7>[ 15.143956] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
<7>[ 15.147093] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
<7>[ 15.151906] systemd[1]: Starting systemd-journald.service - Journal Service...
<7>[ 15.154682] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
<7>[ 15.158292] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
<7>[ 15.162554] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
<7>[ 15.165466] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
<7>[ 15.168678] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
<7>[ 15.172200] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
<7>[ 15.176410] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
<7>[ 15.179296] systemd-journald[211]: Collecting audit messages is disabled.
<7>[ 15.180573] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
<7>[ 15.188818] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
<7>[ 15.194184] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
<7>[ 15.194794] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
<6>[ 15.196203] pstore: Using crash dump compression: deflate
<6>[ 15.197974] pstore: Registered efi_pstore as persistent store backend
<7>[ 15.201166] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
<6>[ 15.205708] fuse: init (API version 7.42)
<7>[ 15.206809] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
<7>[ 15.206920] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 15.206990] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 15.210203] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
<7>[ 15.215436] systemd[1]: Started systemd-journald.service - Journal Service.
<6>[ 15.361617] EXT4-fs (nvme0n1p2): re-mounted ae92fef7-5a02-4ec6-9d86-98e4e30b66f8 r/w. Quota mode: none.
<6>[ 15.392707] Adding 8388604k swap on /swap.img. Priority:-2 extents:52 across:429129728k SS
<7>[ 15.408920] systemd-journald[211]: Received client request to flush runtime journal.
<7>[ 15.422209] systemd-journald[211]: /var/log/journal/834d840f209d4e2294628ae19454e8da/system.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 15.422221] systemd-journald[211]: Rotating system journal.
<4>[ 16.089190] nvme nvme0: using unchecked data buffer
<6>[ 16.240792] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002)
<4>[ 16.248903] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.248927] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.248952] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.248976] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.249001] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.249026] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.249050] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.249075] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.249099] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.249124] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.249149] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.249173] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.249198] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.249222] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.249247] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.249272] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.249296] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.249333] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.249357] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.249381] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.249406] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.249431] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.249455] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.249480] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.249504] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.249541] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.249565] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.249636] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.249660] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.249684] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.249709] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.249734] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.249922] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.249947] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.249971] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.249996] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.250020] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.250045] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.277750] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.277889] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.277908] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.277933] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.277957] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.277982] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.278018] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.278043] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.278255] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.278325] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.278360] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.278407] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.278537] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.278560] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.278585] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.278621] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.278657] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.278681] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.278706] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.278730] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.278755] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.278793] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.278811] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.278835] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.278860] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.278885] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.278909] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.278934] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.278959] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.278983] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<6>[ 16.295482] input: Intel HID events as /devices/platform/INTC107B:00/input/input3
<4>[ 16.300761] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.300786] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.300806] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.300826] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.300846] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.300866] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.300885] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.301002] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.301022] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.301042] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.301062] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.301082] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.301102] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.301114] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.301127] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.301139] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.301159] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.301172] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.301203] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.301215] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.301228] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.301247] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.301285] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.301297] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.301310] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.301338] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.301351] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.301363] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.301376] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.301401] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.301413] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.301426] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.301438] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.301451] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.301463] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.301476] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.301488] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.301501] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.301513] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<6>[ 16.303194] intel-hid INTC107B:00: platform supports 5 button array
<6>[ 16.313489] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4
<6>[ 16.346903] pci 0000:00:05.0: Setting to D3hot
<4>[ 16.353660] gpio gpiochip3: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.353686] gpio gpiochip3: gpiochip_add_data_with_key: get_direction failed: -22
<6>[ 16.359308] pci 0000:00:0b.0: Setting to D3hot
<4>[ 16.370950] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform
<6>[ 16.371147] intel_pmc_core INT33A1:00: initialized
<4>[ 16.421505] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.421530] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.421550] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.421569] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.421589] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.421610] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.421633] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.421649] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.421669] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.421715] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.421735] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.421791] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.421811] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.421845] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.421865] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.421885] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.421905] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.421941] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.421962] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.421982] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.422002] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.422024] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.422044] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.422064] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.422084] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.422120] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.422156] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.422176] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.422196] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.422230] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.422249] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.422270] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.422289] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.422309] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.422329] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.422349] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.422369] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.422389] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.422409] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.422429] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.422449] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.422469] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.422489] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.422508] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.422528] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<5>[ 16.430267] audit: type=1400 audit(1740814814.387:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=429 comm="apparmor_parser"
<5>[ 16.430702] audit: type=1400 audit(1740814814.387:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=428 comm="apparmor_parser"
<5>[ 16.431322] audit: type=1400 audit(1740814814.388:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=430 comm="apparmor_parser"
<5>[ 16.432410] audit: type=1400 audit(1740814814.389:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=431 comm="apparmor_parser"
<5>[ 16.432980] audit: type=1400 audit(1740814814.390:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=432 comm="apparmor_parser"
<5>[ 16.434968] audit: type=1400 audit(1740814814.392:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=433 comm="apparmor_parser"
<3>[ 16.438387] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121
<5>[ 16.438833] audit: type=1400 audit(1740814814.396:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=434 comm="apparmor_parser"
<5>[ 16.439467] audit: type=1400 audit(1740814814.396:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=435 comm="apparmor_parser"
<5>[ 16.443484] audit: type=1400 audit(1740814814.400:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=436 comm="apparmor_parser"
<5>[ 16.444623] audit: type=1400 audit(1740814814.401:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=437 comm="apparmor_parser"
<3>[ 16.446183] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121
<6>[ 16.830959] ACPI: bus type thunderbolt registered
<6>[ 16.841970] idma64 idma64.0: Found Intel integrated DMA 64-bit
<6>[ 16.846174] idma64 idma64.1: Found Intel integrated DMA 64-bit
<6>[ 16.865491] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002)
<6>[ 16.884946] idma64 idma64.2: Found Intel integrated DMA 64-bit
<6>[ 16.903016] idma64 idma64.3: Found Intel integrated DMA 64-bit
<6>[ 16.903236] e1000e: Intel(R) PRO/1000 Network Driver
<6>[ 16.903240] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<6>[ 16.903964] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43
<6>[ 16.903971] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS
<6>[ 16.904076] e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
<6>[ 16.905589] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
<6>[ 16.950251] r8169 0000:7f:00.0: enabling device (0000 -> 0003)
<6>[ 16.970584] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0
<6>[ 16.987647] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402)
<6>[ 16.992600] intel_rapl_common: Found RAPL domain package
<6>[ 16.992608] intel_rapl_common: Found RAPL domain dram
<6>[ 17.051015] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0
<6>[ 17.089762] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
<6>[ 17.089825] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
<6>[ 17.089827] RAPL PMU: hw unit of domain package 2^-14 Joules
<6>[ 17.089829] RAPL PMU: hw unit of domain dram 2^-14 Joules
<6>[ 17.089830] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
<6>[ 17.089831] RAPL PMU: hw unit of domain psys 2^-14 Joules
<6>[ 17.133163] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, 9c:a2:f4:61:fe:e9, XID 541, IRQ 184
<6>[ 17.133169] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
<6>[ 17.135832] cryptd: max_cpu_qlen set to 1000
<6>[ 17.195014] AES CTR mode by8 optimization enabled
<4>[ 17.401701] block nvme0n1: No UUID available providing old NGUID
<6>[ 17.452505] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
<6>[ 17.547162] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 90:49:fa:0a:30:89
<6>[ 17.547168] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection
<6>[ 17.547287] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF
<6>[ 17.584171] evm: overlay not supported
<6>[ 17.601064] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin
<6>[ 17.630660] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888
<6>[ 17.630666] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716
<6>[ 17.630668] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472
<6>[ 17.739550] intel_rapl_common: Found RAPL domain package
<6>[ 17.739555] intel_rapl_common: Found RAPL domain core
<6>[ 17.739558] intel_rapl_common: Found RAPL domain uncore
<6>[ 17.739560] intel_rapl_common: Found RAPL domain dram
<6>[ 17.739562] intel_rapl_common: Found RAPL domain psys
<4>[ 17.821248] spi-nor spi0.0: supply vcc not found, using dummy regulator
<6>[ 17.854755] r8169 0000:7f:00.0 enp127s0: renamed from eth0
<5>[ 17.876369] Creating 1 MTD partitions on "0000:00:1f.5":
<5>[ 17.876386] 0x000000000000-0x000002000000 : "BIOS"
<6>[ 17.971827] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth1
<6>[ 18.031915] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC)
<6>[ 18.133328] loop0: detected capacity change from 0 to 8
<6>[ 18.192042] r8169 0000:7f:00.0 enp127s0: Link is Down
<6>[ 18.377550] Consider using thermal netlink events interface
<6>[ 18.625263] hid: raw HID events driver (C) Jiri Kosina
<6>[ 18.631788] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
<6>[ 18.669557] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.670769] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.671999] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.672680] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.674215] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 18.674855] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 18.680097] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.684024] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.688011] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.690886] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.694575] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 18.697597] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 19.409919] typec port0: bound usb3-port1 (ops connector_ops)
<6>[ 19.409955] typec port0: bound usb2-port1 (ops connector_ops)
<6>[ 20.413624] typec port1: bound usb3-port2 (ops connector_ops)
<6>[ 20.413662] typec port1: bound usb2-port2 (ops connector_ops)
<6>[ 23.867720] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off
<7>[ 29.452539] systemd-journald[211]: /var/log/journal/834d840f209d4e2294628ae19454e8da/user-1000.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 51.388288] [IGT] xe_module_load: executing
<7>[ 51.397088] [IGT] xe_module_load: starting subtest load
<5>[ 51.579845] Setting dangerous option force_probe - tainting kernel
<6>[ 51.582645] xe 0000:00:02.0: vgaarb: deactivate vga console
<6>[ 51.584098] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0
<7>[ 51.584109] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG / Xe2_HPG / Xe3_LPG (20.04) media:Xe2_LPM / Xe2_HPM / Xe3_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0
<7>[ 51.584235] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)
<7>[ 51.584340] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)
<6>[ 51.589468] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.36.0
<7>[ 51.593526] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002523d7
<7>[ 51.593621] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7>[ 51.593699] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000
<7>[ 51.593783] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 51.593862] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006ca
<7>[ 51.593938] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 51.594012] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 51.594084] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 51.594151] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 51.594217] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 51.594282] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 51.594346] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 51.594412] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 51.594479] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 51.594546] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 51.594660] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7>[ 51.596051] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[ 51.596149] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 51.605820] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 51.606995] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 51.607169] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT safe-mode enabled
<7>[ 51.607375] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,000000ef
<7>[ 51.607561] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,000000ef
<7>[ 51.607724] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 000000ff
<7>[ 51.607896] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 51.608045] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,000000ff
<6>[ 51.609041] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.36.0
<7>[ 51.613820] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c5e3d7
<7>[ 51.614040] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 51.614234] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000
<7>[ 51.614421] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 51.614599] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae2
<7>[ 51.614795] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 51.614965] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 51.615134] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 51.615297] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 51.615459] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 51.615623] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 51.615828] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 51.616000] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 51.616156] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<6>[ 51.618507] xe 0000:00:02.0: [drm] Using HuC firmware from xe/lnl_huc.bin version 9.4.13
<6>[ 51.623290] xe 0000:00:02.0: [drm] Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.0.1263
<6>[ 51.624396] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])
<7>[ 51.624540] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 51.624716] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7>[ 51.626462] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 51.626617] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 51.646209] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 51.646655] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 51.646874] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT safe-mode enabled
<7>[ 51.647064] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,00000000
<7>[ 51.647233] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,00000000
<7>[ 51.647399] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 00000000
<7>[ 51.647559] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 51.647719] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,0000000f
<7>[ 51.648460] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes
<7>[ 51.648813] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7>[ 51.649116] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018
<7>[ 51.649420] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0
<7>[ 51.649663] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported
<7>[ 51.649918] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported
<7>[ 51.650201] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported
<7>[ 51.650428] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present
<7>[ 51.650699] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)
<7>[ 51.650993] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num qgv points 4
<7>[ 51.651323] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8
<7>[ 51.651591] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes
<7>[ 51.651873] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152
<7>[ 51.652209] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296
<7>[ 51.652488] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392
<7>[ 51.652764] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520
<7>[ 51.653071] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400
<7>[ 51.653339] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800
<7>[ 51.653587] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 51.653840] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 51.654119] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400
<7>[ 51.654358] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 51.654589] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 51.654810] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 51.655048] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400
<7>[ 51.655256] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 51.655441] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 51.655652] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 51.655859] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400
<7>[ 51.656033] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 51.656193] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 51.656349] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 51.656517] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400
<7>[ 51.656667] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 51.656809] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 51.656941] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 51.657071] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400
<7>[ 51.657199] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 51.657325] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 51.657445] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 51.657568] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7>[ 51.658401] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7>[ 51.658659] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 260
<7>[ 51.658868] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7>[ 51.659033] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7>[ 51.659192] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7>[ 51.659341] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7>[ 51.659491] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 848, min size 848)
<7>[ 51.659662] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7>[ 51.659819] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7>[ 51.659973] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7>[ 51.660119] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7>[ 51.660261] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7>[ 51.660401] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7>[ 51.660545] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7>[ 51.660695] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7>[ 51.660852] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7>[ 51.661001] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7>[ 51.661152] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 260 not known; assuming 40
<7>[ 51.661305] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806
<7>[ 51.661467] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 51.661653] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 51.661853] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 51.662031] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7>[ 51.662186] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[ 51.662343] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 51.662502] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 51.662660] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 51.662842] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a
<7>[ 51.663148] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 51.663479] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7>[ 51.663806] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 51.664136] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7>[ 51.664450] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.
<7>[ 51.664734] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7>[ 51.665039] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 51.665269] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 51.665536] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6>[ 51.665770] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=mem
<7>[ 51.665821] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7>[ 51.666134] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7>[ 51.666404] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7>[ 51.666628] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7>[ 51.667209] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC
<7>[ 51.667587] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin
<7>[ 51.670688] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7>[ 51.670955] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us
<7>[ 51.671206] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 9 (9.0 usec)
<7>[ 51.671404] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 103 (103.0 usec)
<7>[ 51.671581] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 103 (103.0 usec)
<7>[ 51.671747] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 103 (103.0 usec)
<7>[ 51.671929] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 96 (96.0 usec)
<7>[ 51.672092] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 103 (103.0 usec)
<7>[ 51.673234] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7>[ 51.673419] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7>[ 51.673588] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7>[ 51.673745] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)
<7>[ 51.673911] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)
<7>[ 51.674052] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57b856f4 (EVT_HTP)
<7>[ 51.674198] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7>[ 51.674333] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0
<7>[ 51.674461] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 51.674582] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)
<7>[ 51.674702] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 51.674835] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)
<7>[ 51.674948] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 51.675059] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)
<7>[ 51.675181] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7>[ 51.675287] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0
<7>[ 51.675393] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 51.675498] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)
<7>[ 51.675603] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 51.675706] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)
<7>[ 51.675816] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 51.675914] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)
<7>[ 51.676015] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7>[ 51.676105] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0
<7>[ 51.676195] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 51.676283] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)
<7>[ 51.676457] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 51.676633] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)
<7>[ 51.676831] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 51.677001] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)
<7>[ 51.680939] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available.
<7>[ 51.685886] xe 0000:00:02.0: [drm:intel_cdclk_dump_config [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 51.686177] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7>[ 51.686457] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7>[ 51.686914] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:188:DDI A/PHY A] Using AUX CH A (VBT)
<7>[ 51.687267] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:188:DDI A/PHY A]
<6>[ 51.688050] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.28)
<7>[ 51.688296] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2
<7>[ 51.688577] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2
<7>[ 51.688841] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless
<7>[ 51.689097] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7>[ 51.689337] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300
<7>[ 51.689451] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002
<7>[ 51.689555] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName
<7>[ 51.689657] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz
<7>[ 51.689758] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7>[ 51.690433] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:188:DDI A/PHY A] initial power sequencer: PPS 0
<7>[ 51.690736] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 51.691030] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 51.691269] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 51.691502] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 51.691733] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 51.692374] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 51.692793] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 51.693920] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 51.694243] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7>[ 51.696763] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 51.698142] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000
<7>[ 51.699158] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e
<7>[ 51.701103] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3
<7>[ 51.701802] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported
<7>[ 51.704279] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 51.715141] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 51.715163] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.715168] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.715171] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 51.715177] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.715181] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 51.715192] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.715196] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 51.715201] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.715292] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.715296] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.715298] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.715317] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:189:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 51.716048] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:189:eDP-1] Performing OUI wait (0 ms)
<7>[ 51.716725] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:189:eDP-1] Detected unsupported HDR backlight interface version 0
<7>[ 51.716840] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:189:eDP-1] DRRS type: none
<7>[ 51.716979] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:189:eDP-1] Using native PCH PWM for backlight control (controller=0)
<7>[ 51.717108] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:189:eDP-1] backlight initialized, enabled, brightness 192000/192000
<7>[ 51.717292] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 51.717395] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 51.717485] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 51.717572] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 51.717655] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 51.717776] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 51.718018] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:197:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)
<7>[ 51.718203] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 51.718347] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 51.718861] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:209:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)
<7>[ 51.719002] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 51.719127] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 51.719396] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:217:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)
<7>[ 51.719528] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 51.719660] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 51.720258] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:82:pipe A] hw state readout: enabled
<7>[ 51.720407] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:134:pipe B] hw state readout: disabled
<7>[ 51.720539] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:186:pipe C] hw state readout: disabled
<7>[ 51.720630] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] hw state readout: enabled, pipe A
<7>[ 51.720716] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] hw state readout: disabled, pipe A
<7>[ 51.720813] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] hw state readout: disabled, pipe A
<7>[ 51.720902] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] hw state readout: disabled, pipe A
<7>[ 51.720986] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] hw state readout: disabled, pipe A
<7>[ 51.721069] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] hw state readout: disabled, pipe A
<7>[ 51.721152] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] hw state readout: disabled, pipe B
<7>[ 51.721233] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] hw state readout: disabled, pipe B
<7>[ 51.721315] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] hw state readout: disabled, pipe B
<7>[ 51.721397] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] hw state readout: disabled, pipe B
<7>[ 51.721479] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] hw state readout: disabled, pipe B
<7>[ 51.721560] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] hw state readout: disabled, pipe B
<7>[ 51.721641] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] hw state readout: disabled, pipe C
<7>[ 51.721722] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] hw state readout: disabled, pipe C
<7>[ 51.721815] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] hw state readout: disabled, pipe C
<7>[ 51.721898] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] hw state readout: disabled, pipe C
<7>[ 51.721979] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] hw state readout: disabled, pipe C
<7>[ 51.722060] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] hw state readout: disabled, pipe C
<7>[ 51.722858] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
<7>[ 51.722984] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:188:DDI A/PHY A] hw state readout: enabled, pipe A
<7>[ 51.723081] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected)
<7>[ 51.723178] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:197:DDI TC1/PHY TC1] hw state readout: disabled, pipe A
<7>[ 51.723263] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:199:DP-MST A] hw state readout: disabled, pipe A
<7>[ 51.723344] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:200:DP-MST B] hw state readout: disabled, pipe B
<7>[ 51.723425] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:201:DP-MST C] hw state readout: disabled, pipe C
<7>[ 51.723510] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected)
<7>[ 51.723597] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:209:DDI TC2/PHY TC2] hw state readout: disabled, pipe A
<7>[ 51.723679] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:211:DP-MST A] hw state readout: disabled, pipe A
<7>[ 51.723758] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:212:DP-MST B] hw state readout: disabled, pipe B
<7>[ 51.723842] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DP-MST C] hw state readout: disabled, pipe C
<7>[ 51.723926] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected)
<7>[ 51.724014] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DDI TC3/PHY TC3] hw state readout: disabled, pipe A
<7>[ 51.724096] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:219:DP-MST A] hw state readout: disabled, pipe A
<7>[ 51.724175] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:220:DP-MST B] hw state readout: disabled, pipe B
<7>[ 51.724253] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:221:DP-MST C] hw state readout: disabled, pipe C
<7>[ 51.724364] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:189:eDP-1] hw state readout: enabled
<7>[ 51.724451] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:198:DP-1] hw state readout: disabled
<7>[ 51.724534] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:210:DP-2] hw state readout: disabled
<7>[ 51.724617] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:218:DP-3] hw state readout: disabled
<7>[ 51.724931] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] min_cdclk 173855 kHz
<7>[ 51.725018] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] min_cdclk 0 kHz
<7>[ 51.725097] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] min_cdclk 0 kHz
<7>[ 51.725174] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] min_cdclk 0 kHz
<7>[ 51.725253] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] min_cdclk 0 kHz
<7>[ 51.725330] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] min_cdclk 0 kHz
<7>[ 51.725408] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe A data rate 1390840 num active planes 1
<7>[ 51.725527] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] min_cdclk 0 kHz
<7>[ 51.725614] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] min_cdclk 0 kHz
<7>[ 51.725694] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] min_cdclk 0 kHz
<7>[ 51.725782] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] min_cdclk 0 kHz
<7>[ 51.725863] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] min_cdclk 0 kHz
<7>[ 51.725940] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] min_cdclk 0 kHz
<7>[ 51.726018] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe B data rate 0 num active planes 0
<7>[ 51.726133] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] min_cdclk 0 kHz
<7>[ 51.726220] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] min_cdclk 0 kHz
<7>[ 51.726301] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] min_cdclk 0 kHz
<7>[ 51.726380] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] min_cdclk 0 kHz
<7>[ 51.726458] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] min_cdclk 0 kHz
<7>[ 51.726536] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] min_cdclk 0 kHz
<7>[ 51.726614] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe C data rate 0 num active planes 0
<7>[ 51.726777] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no
<7>[ 51.726894] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A
<7>[ 51.727116] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [setup_hw_state]
<7>[ 51.727232] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 51.727339] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
<7>[ 51.727440] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 51.727537] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 51.727633] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 51.727728] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 51.727830] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64
<7>[ 51.727927] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 51.728021] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 51.728113] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 51.728204] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7>[ 51.728295] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[ 51.728385] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7>[ 51.728476] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[ 51.728567] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 1, framestart delay: 1, MSA timing delay: 0
<7>[ 51.728657] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96
<7>[ 51.728748] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906
<7>[ 51.728843] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 51.728935] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 51.729026] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 51.729117] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 51.729207] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 51.729298] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 51.729387] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 51.729477] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 51.729566] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 51.729655] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 51.729745] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000
<7>[ 51.729843] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0
<7>[ 51.729935] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 51.730025] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 51.730114] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.730204] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.730293] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.730382] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 51.730471] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 51.730561] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.730650] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.730739] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.730833] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 51.730923] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:134:pipe B] enable: no [setup_hw_state]
<7>[ 51.731012] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:186:pipe C] enable: no [setup_hw_state]
<7>[ 51.731252] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:82:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no
<7>[ 51.731354] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:134:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 51.731443] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:186:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 51.731758] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:82:pipe A][PLANE:32:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800
<7>[ 51.731857] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:32:plane 1A] on [CRTC:82:pipe A]
<7>[ 51.752216] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT1: GuC CT safe-mode canceled
<7>[ 51.815829] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT0: GuC CT safe-mode canceled
<6>[ 51.969521] xe 0000:00:02.0: [drm] ccs1 fused off
<6>[ 51.969524] xe 0000:00:02.0: [drm] ccs2 fused off
<6>[ 51.969525] xe 0000:00:02.0: [drm] ccs3 fused off
<7>[ 51.969594] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add rcs0 whitelist to engine
<7>[ 51.969683] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 51.969784] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 51.969866] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 51.969978] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs0 whitelist to engine
<7>[ 51.970085] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs8 whitelist to engine
<7>[ 51.970213] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add ccs0 whitelist to engine
<7>[ 51.970292] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 51.970371] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 51.970446] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 51.971437] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs
<7>[ 51.971515] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000
<7>[ 51.971595] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000
<7>[ 51.971672] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440
<7>[ 51.971745] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000
<7>[ 51.971828] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000
<7>[ 51.971897] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f
<7>[ 51.971973] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1
<7>[ 51.972052] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16
<7>[ 51.972128] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc
<7>[ 51.972205] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 51.972269] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130
<7>[ 51.972332] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 51.972394] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100
<7>[ 51.972455] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100
<7>[ 51.972516] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100
<7>[ 51.972577] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100
<7>[ 51.972638] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100
<7>[ 51.972699] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100
<7>[ 51.972758] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100
<7>[ 51.972828] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100
<7>[ 51.972891] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100
<7>[ 51.972957] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100
<7>[ 51.973024] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100
<7>[ 51.973088] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100
<7>[ 51.973149] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs
<7>[ 51.973215] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306
<7>[ 51.973277] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080
<7>[ 51.973338] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d0] = 0x1000dafc
<7>[ 51.973395] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d4] = 0x1000db01
<7>[ 51.973452] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d8] = 0x0000db1c
<7>[ 51.973511] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040
<7>[ 51.973572] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200
<7>[ 51.973633] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000
<7>[ 51.973693] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08000800
<7>[ 51.973752] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002
<7>[ 51.973828] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000
<7>[ 51.973895] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000
<7>[ 51.974217] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs
<7>[ 51.974276] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306
<7>[ 51.974328] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080
<7>[ 51.974515] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs
<7>[ 51.974567] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306
<7>[ 51.974616] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080
<7>[ 51.974794] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs
<7>[ 51.974846] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0306
<7>[ 51.974908] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080
<7>[ 51.974970] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d0] = 0x1000dafc
<7>[ 51.975033] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d4] = 0x1000db01
<7>[ 51.975096] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d8] = 0x0000db1c
<7>[ 51.975456] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002523d7
<7>[ 51.975519] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000800
<7>[ 51.975579] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000014
<7>[ 51.975637] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 51.975693] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006ca
<7>[ 51.975748] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 51.975812] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 51.975877] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 51.975943] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 51.976008] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 51.976072] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 51.976132] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 51.976187] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 51.976237] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 51.976304] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs
<7>[ 51.976564] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells
<7>[ 51.978818] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 42 ext-regs.
<7>[ 51.992189] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: ADS capture alloc size changed from 45056 to 20480
<7>[ 51.992966] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[ 51.993051] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 51.997875] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000086 [0x43/00]
<7>[ 51.998017] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x80000534 [0x1A/05]
<7>[ 52.000860] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 7ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 52.001209] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 52.002097] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA rcs0 save-restore batch
<7>[ 52.002194] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400
<7>[ 52.002275] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x00400040
<7>[ 52.002341] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020
<7>[ 52.002410] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = 0x3ca18000
<7>[ 52.002476] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240
<7>[ 52.002549] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000
<7>[ 52.002619] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420
<7>[ 52.002691] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000
<7>[ 52.005891] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA bcs0 save-restore batch
<7>[ 52.006000] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = 0x00000606
<7>[ 52.006099] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<7>[ 52.008428] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<6>[ 52.013205] xe 0000:00:02.0: [drm] vcs1 fused off
<6>[ 52.013209] xe 0000:00:02.0: [drm] vcs2 fused off
<6>[ 52.013210] xe 0000:00:02.0: [drm] vcs3 fused off
<6>[ 52.013211] xe 0000:00:02.0: [drm] vcs4 fused off
<6>[ 52.013212] xe 0000:00:02.0: [drm] vcs5 fused off
<6>[ 52.013213] xe 0000:00:02.0: [drm] vcs6 fused off
<6>[ 52.013214] xe 0000:00:02.0: [drm] vcs7 fused off
<6>[ 52.013214] xe 0000:00:02.0: [drm] vecs1 fused off
<6>[ 52.013215] xe 0000:00:02.0: [drm] vecs2 fused off
<6>[ 52.013216] xe 0000:00:02.0: [drm] vecs3 fused off
<7>[ 52.013253] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vcs0 whitelist to engine
<7>[ 52.013376] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vecs0 whitelist to engine
<7>[ 52.013495] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add gsccs0 whitelist to engine
<7>[ 52.014225] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs
<7>[ 52.014332] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000
<7>[ 52.014438] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000
<7>[ 52.014546] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440
<7>[ 52.014649] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000
<7>[ 52.014750] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000
<7>[ 52.014891] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f
<7>[ 52.014990] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1
<7>[ 52.015087] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16
<7>[ 52.015181] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc
<7>[ 52.015273] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 52.015366] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130
<7>[ 52.015457] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 52.015547] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100
<7>[ 52.015636] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100
<7>[ 52.015724] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100
<7>[ 52.015825] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100
<7>[ 52.015912] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100
<7>[ 52.015998] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100
<7>[ 52.016083] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100
<7>[ 52.016168] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100
<7>[ 52.016251] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100
<7>[ 52.016338] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100
<7>[ 52.016426] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100
<7>[ 52.016517] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100
<7>[ 52.016606] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs
<7>[ 52.016709] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000
<7>[ 52.017393] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs
<7>[ 52.017504] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000
<7>[ 52.017926] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs
<7>[ 52.018032] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000
<7>[ 52.018682] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c5e3d7
<7>[ 52.018833] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 52.018942] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000014
<7>[ 52.019030] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 52.019114] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae2
<7>[ 52.019196] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 52.019276] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 52.019353] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 52.019427] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 52.019499] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 52.019570] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 52.019639] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 52.019707] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 52.019780] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<7>[ 52.019867] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs
<7>[ 52.019977] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells
<7>[ 52.038313] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: ADS capture alloc size changed from 45056 to 24576
<7>[ 52.039441] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 52.039592] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 52.059093] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 52.059603] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 52.061255] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 52.063972] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 52.066917] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 52.111338] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC
<7>[ 52.113295] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[ 52.113827] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[ 52.114145] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 2048) -> ( 0 - 0), size 2048 -> 0
<7>[ 52.114445] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] ddb ( 0 - 0) -> (4054 - 4096), size 0 -> 42
<7>[ 52.114692] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 52.115024] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 52.115306] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 52.115580] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 52.115868] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 52.117407] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x13410e72)
<7>[ 52.118309] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A)
<7>[ 52.118587] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7>[ 52.122362] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc010e72)
<7>[ 52.132120] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:189:eDP-1] adding connector to sysfs
<7>[ 52.137318] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:189:eDP-1] backlight device intel_backlight registered
<7>[ 52.138301] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
<7>[ 52.141468] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:189:eDP-1] generating connector hotplug event
<7>[ 52.141594] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:198:DP-1] adding connector to sysfs
<7>[ 52.142308] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1
<7>[ 52.143756] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:198:DP-1] generating connector hotplug event
<7>[ 52.143853] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:210:DP-2] adding connector to sysfs
<7>[ 52.144496] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2
<7>[ 52.145640] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:210:DP-2] generating connector hotplug event
<7>[ 52.145715] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:218:DP-3] adding connector to sysfs
<7>[ 52.146467] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3
<7>[ 52.147654] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:218:DP-3] generating connector hotplug event
<6>[ 52.147718] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0
<7>[ 52.147815] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected
<6>[ 52.158550] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6>[ 52.160933] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
<7>[ 52.161870] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7>[ 52.162006] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7>[ 52.163127] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:32:plane 1A] no fb, skipping
<7>[ 52.163219] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:134:pipe B] not active, skipping
<7>[ 52.163301] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:186:pipe C] not active, skipping
<7>[ 52.163378] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7>[ 52.163535] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 52.163712] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 52.163726] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 52.165054] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 52.165565] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 52.165685] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 52.165858] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 52.166089] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 52.166095] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 52.166096] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.166097] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 52.166100] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.166102] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 52.166106] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.166107] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 52.166110] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.166129] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 52.166243] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 52.166934] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 52.167068] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 52.168103] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] status updated from unknown to connected
<5>[ 52.168533] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 52.168535] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 52.168536] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.168564] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 52.168576] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 52.168586] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 52.168594] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 52.168778] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 52.168907] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] status updated from unknown to disconnected
<7>[ 52.168918] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 52.168927] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 52.168935] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 52.169080] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 52.169200] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] status updated from unknown to disconnected
<7>[ 52.169209] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 52.169217] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 52.169225] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 52.169356] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 52.169458] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] status updated from unknown to disconnected
<7>[ 52.169466] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 52.169472] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 52.169476] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 52.169478] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 52.169480] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 52.169555] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 52.169565] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 52.169568] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 52.169570] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 52.169572] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7>[ 52.169581] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 52.169612] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<7>[ 52.169654] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 52.169683] xe 0000:00:02.0: [drm:intelfb_create [xe]] no BIOS fb, allocating a new one
<7>[ 52.169932] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[ 52.170254] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 52.170398] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 52.176690] xe 0000:00:02.0: [drm:intelfb_create [xe]] allocated 2880x1800 fb: 0x01d95000
<6>[ 52.177462] fbcon: xedrmfb (fb0) is primary device
<7>[ 52.178244] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:189:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7>[ 52.178368] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:188:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7>[ 52.178471] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7>[ 52.178580] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7>[ 52.178682] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:188:DDI A/PHY A] [CRTC:82:pipe A]
<7>[ 52.178801] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288)
<7>[ 52.178922] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10
<7>[ 52.179037] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7>[ 52.179138] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes,
<7>[ 52.179234] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1,
<7>[ 52.179330] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1.
<7>[ 52.179424] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 52.179516] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 52.179610] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7>[ 52.179694] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 52.179784] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 52.179885] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 52.179987] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7>[ 52.180088] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7>[ 52.180198] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no,
<7>[ 52.180296] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1.
<7>[ 52.180390] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 52.180463] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 52.180535] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7>[ 52.180608] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 52.180683] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 52.180759] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 52.180858] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7>[ 52.180947] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30)
<7>[ 52.181050] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000)
<7>[ 52.181153] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7>[ 52.181281] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054
<7>[ 52.181370] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7>[ 52.181455] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 3, 1 -> 2, 12, 12, 12, 11, 12, 0, 0, 0, 3, 0
<7>[ 52.181540] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] blocks 25, 25, 25, 25, 25, 25, 0, 0, 7, 73, 7 -> 49, 289, 289, 289, 265, 289, 0, 0, 63, 73, 87
<7>[ 52.181628] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 319, 319, 319, 293, 319, 0, 0, 64, 82, 88
<7>[ 52.181705] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 52.181786] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 52.181874] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 52.181960] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 52.182045] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 52.182117] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 52.182180] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 52.182247] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 52.182315] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 52.182383] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 52.182449] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 52.182521] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 52.182595] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 52.182669] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 52.182741] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 52.182828] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 52.182924] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 52.183008] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 52.183091] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 52.183173] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 52.183254] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:82:pipe A] data rate 1390840 num active planes 1
<7>[ 52.183369] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 52.183480] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 52.183571] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 52.183668] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 52.183777] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 52.183904] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (27165 kHz) > old min cdclk (0 kHz)
<7>[ 52.184031] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [modeset]
<7>[ 52.184140] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 52.184244] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7>[ 52.184333] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 52.184431] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 52.184537] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 52.184643] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 52.184753] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7>[ 52.184874] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 52.184970] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 52.185064] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 52.185155] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7>[ 52.185246] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[ 52.185336] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7>[ 52.185426] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7>[ 52.185507] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7>[ 52.185581] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7>[ 52.185653] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7>[ 52.185736] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7>[ 52.185832] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7>[ 52.185918] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[ 52.186002] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0
<7>[ 52.186085] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1906, vmax: 2859, flipline: 1906, pipeline full: 0, guardband: 106 vsync start: 103, vsync end: 97
<7>[ 52.186166] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1800, vmax vblank: 2753, vmin vtotal: 1906, vmax vtotal: 2859
<7>[ 52.186229] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 52.186292] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 52.186360] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 52.186427] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 52.186494] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 52.186562] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 52.186633] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 52.186705] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 52.186784] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 52.186875] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 52.186955] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7>[ 52.187034] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7>[ 52.187112] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 52.187182] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 52.187249] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 52.187311] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 52.187372] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 52.187436] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 52.187501] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 52.187565] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 52.187627] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 52.187689] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 52.187748] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 52.187824] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:32:plane 1A] fb: [FB:190] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7>[ 52.187902] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7>[ 52.187979] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7>[ 52.188056] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:41:plane 2A] fb: [NOFB], visible: no
<7>[ 52.188122] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:50:plane 3A] fb: [NOFB], visible: no
<7>[ 52.188184] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:59:plane 4A] fb: [NOFB], visible: no
<7>[ 52.188244] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:68:plane 5A] fb: [NOFB], visible: no
<7>[ 52.188312] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:77:cursor A] fb: [NOFB], visible: no
<7>[ 52.189048] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<6>[ 52.216641] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0
<7>[ 52.217173] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed
<7>[ 52.239916] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC
<7>[ 52.392442] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 0
<7>[ 52.393680] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7>[ 52.414800] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power off
<7>[ 52.414890] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 52.415100] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power off time
<7>[ 52.415189] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 52.415448] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7>[ 52.467849] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 52.468206] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 52.498014] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 52.498449] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7>[ 52.498417] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 52.499444] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)
<7>[ 52.499457] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 52.499717] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:188:DDI A/PHY A]
<7>[ 52.500031] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 52.500259] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:199:DP-MST A]
<7>[ 52.500479] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:200:DP-MST B]
<7>[ 52.500693] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:201:DP-MST C]
<7>[ 52.500925] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 52.501138] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:211:DP-MST A]
<7>[ 52.501326] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:212:DP-MST B]
<7>[ 52.501512] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DP-MST C]
<7>[ 52.501697] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 52.501903] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DP-MST A]
<7>[ 52.502088] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:220:DP-MST B]
<7>[ 52.502313] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:221:DP-MST C]
<7>[ 52.502521] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 52.503173] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 52.503413] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 52.503636] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7>[ 52.503875] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 52.503928] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power on
<7>[ 52.504208] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power cycle (495 ms remaining)
<7>[ 52.643111] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed
<7>[ 53.008084] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7>[ 53.090494] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 53.090812] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power on
<7>[ 53.091087] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7>[ 53.127340] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 53.127615] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 53.127880] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7>[ 53.128184] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 53.224632] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 53.224632] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 53.224633] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 53.312020] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 53.314231] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 53.314623] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7>[ 53.318720] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 53.320046] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Reloading eDP link rates
<7>[ 53.321298] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7>[ 53.322558] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7>[ 53.323786] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7>[ 53.325234] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Clock recovery OK
<7>[ 53.325569] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7>[ 53.327286] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7>[ 53.327611] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7>[ 53.328387] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7>[ 53.328901] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7>[ 53.329256] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7>[ 53.329640] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 192000
<6>[ 53.331745] xe 0000:00:02.0: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
<7>[ 53.331779] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 11059200 bytes of contiguous stolen space for FBC, limit: 2
<7>[ 53.332101] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:32:plane 1A]
<7>[ 53.345872] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7>[ 53.348309] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:189:eDP-1]
<7>[ 53.348691] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:82:pipe A]
<7>[ 53.350155] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp
<6>[ 53.352632] Console: switching to colour frame buffer device 180x56
<6>[ 53.367223] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device
<7>[ 53.384949] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20
<7>[ 53.385323] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7>[ 53.385591] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7>[ 53.385867] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7>[ 53.386100] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7>[ 53.386323] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7>[ 53.386537] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7>[ 53.386756] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7>[ 53.386990] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7>[ 53.387188] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7>[ 53.387382] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7>[ 53.387574] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7>[ 53.387760] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7>[ 53.387989] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7>[ 53.388180] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7>[ 53.388365] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7>[ 53.388548] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7>[ 53.388743] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7>[ 53.388977] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7>[ 53.389179] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7>[ 53.389377] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7>[ 53.389569] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7>[ 53.389940] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]]
<7>[ 53.389977] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 53.390589] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 53.390623] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 53.390831] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device
<7>[ 53.391132] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC
<7>[ 53.391441] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7>[ 53.392410] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7>[ 53.392797] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7>[ 53.393118] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 53.394225] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 53.395026] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 53.395328] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 53.395578] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 53.396149] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 53.396165] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 53.396170] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 53.396175] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 53.396182] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 53.396186] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 53.396201] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 53.396205] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 53.396212] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 53.396260] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 53.396536] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 53.396893] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 53.397228] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 53.397496] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[ 53.398008] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7>[ 53.398201] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 53.398428] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<5>[ 53.402894] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 53.402900] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 53.402904] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 53.402991] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 53.403027] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 53.403050] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 53.403071] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 53.403418] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 53.403652] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 53.403678] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 53.403699] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 53.404005] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 53.404220] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 53.404241] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 53.404260] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 53.404543] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 53.404740] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 53.404760] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 53.404797] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 53.404803] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 53.404809] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 53.405090] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 53.405126] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 53.405133] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 53.405139] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 53.405145] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7>[ 53.405185] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 53.407621] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 53.407895] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7>[ 53.414004] xe 0000:00:02.0: [drm:drm_client_dev_hotplug] intel-fbdev: ret=0
<6>[ 53.463040] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<6>[ 53.465482] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])
<7>[ 53.465705] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7>[ 53.466119] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7>[ 53.479196] xe 0000:00:02.0: [drm:drm_client_dev_restore] intel-fbdev: ret=0
<7>[ 53.479281] [IGT] xe_module_load: finished subtest load, SUCCESS
<7>[ 53.479360] [IGT] xe_module_load: exiting, ret=0
<7>[ 53.501613] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000
<7>[ 53.501737] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:189:eDP-1] set backlight level = 13892
<7>[ 53.503849] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 53.503967] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 53.504058] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 53.504133] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 53.504203] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 53.504270] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 53.504337] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 53.504399] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 53.504461] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 53.504523] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 53.504583] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 53.504642] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 53.504700] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 53.504757] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 53.504905] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 53.504981] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 53.505057] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 53.505127] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 53.505184] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 53.505242] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 53.505299] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 53.505356] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 53.505413] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 53.505473] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 53.505535] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 53.505596] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 53.505653] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 53.505709] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 53.505764] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 53.505845] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 53.505917] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 53.505989] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 53.506061] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 53.506126] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 53.506194] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 53.506273] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 53.511952] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 53.512096] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 53.512212] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<6>[ 53.516144] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
<6>[ 53.519118] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
<6>[ 53.520580] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
<6>[ 53.521416] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
<7>[ 54.441677] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 54.441698] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 54.441680] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 54.664723] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 55.912472] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD off
<7>[ 55.912855] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067