Using IGT_SRANDOM=1768490991 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768488145 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768425639 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768422280 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768409088 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768404675 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768394755 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768391926 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768367523 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768363388 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768359173 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768323685 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768310084 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768306687 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768291654 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768278106 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768262847 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768260046 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768256845 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768250204 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768247409 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768244101 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768240807 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768234190 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768230881 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768224547 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768200507 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768189660 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768144286 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1767996555 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768490725 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768487902 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768425580 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768422248 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768409092 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768404546 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768394614 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768391791 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768367412 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768363247 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768359164 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768323586 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768309946 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768306684 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768291449 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768277952 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768262800 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768260000 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768256713 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768250092 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768247375 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768244070 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768240770 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768234178 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768230703 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768200440 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768189514 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768144176 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1767996373 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768490284 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(3)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768487610 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(3)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768424872 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(3)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768421657 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(3)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768391498 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(3)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768367081 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(3)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768362855 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(3)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768358676 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(3)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768323255 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(3)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768306210 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(3)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768291136 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(3)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768277560 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(3)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768262789 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(3)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768259870 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(3)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768256567 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(3)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768250260 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(3)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768247032 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(3)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768243761 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(3)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768240405 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(3)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768233828 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(3)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768230487 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(3)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768200098 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(3)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768189116 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(3)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768143461 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(3)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1767995768 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(3)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768490798 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768488011 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768425888 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768422544 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768409536 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768404769 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768394709 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768391843 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768367563 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768363478 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768359236 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768323744 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768310009 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768306651 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768291712 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768278112 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768262800 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768260007 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768257040 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768250132 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768247336 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768244031 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768240755 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768234144 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768230862 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768224522 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768200385 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768190092 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768144135 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1767996663 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768490279 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768487337 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768424787 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768421488 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768408289 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768403905 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768393985 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768262788 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768259858 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768256569 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768249950 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768247004 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768243650 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768240309 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768233731 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768230391 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768224083 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768199977 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768189064 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768143166 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1767996221 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(4)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768488230 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(2) not equal to the number of pipes supported(3)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768263046 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(2) not equal to the number of pipes supported(3)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768260243 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(2) not equal to the number of pipes supported(3)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768251204 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(2) not equal to the number of pipes supported(3)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768248222 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(2) not equal to the number of pipes supported(3)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768245255 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(2) not equal to the number of pipes supported(3)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768231902 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(2) not equal to the number of pipes supported(3)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768225670 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(2) not equal to the number of pipes supported(3)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768189950 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(2) not equal to the number of pipes supported(3)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768145092 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(2) not equal to the number of pipes supported(3)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768491589 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(2)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768488263 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(2)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768426224 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(2)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768423051 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(2)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768409803 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(2)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768404973 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(2)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768395199 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(2)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768392491 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(2)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768368437 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(2)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768364201 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(2)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768360057 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(2)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768324513 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(2)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768310344 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(2)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768307021 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(2)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768291842 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(2)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768278201 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(2)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768262801 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(2)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768260419 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(2)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768257142 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(2)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768250595 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(2)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768247704 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(2)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768244418 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(2)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768241085 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(2)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768234446 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(2)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768231262 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(2)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768224795 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(2)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768200747 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(2)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768189820 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(2)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1768144508 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(2)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)

Using IGT_SRANDOM=1767996779 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic-max-pipe-crc-check
Test requirement not met in function test_multipipe, file ../tests/kms_multipi...
Test requirement: valid_outputs == num_pipes
Number of connected outputs(1) not equal to the number of pipes supported(2)
Subtest basic-max-pipe-crc-check: SKIP (0.000s)