Results for igt@kms_invalid_dotclock

Result: skip

integration-manifest git-log-oneline igt_runner27 run27 boot27 dmesg27 runtimes27

DetailValue
Duration 1.23 seconds
Igt-Version
IGT-Version: 1.24-g6ddc1a14 (x86_64) (Linux: 5.3.0-rc8-g666925d1b342-drmtip_371+ x86_64)
Out
IGT-Version: 1.24-g6ddc1a14 (x86_64) (Linux: 5.3.0-rc8-g666925d1b342-drmtip_371+ x86_64)
Max dotclock: 1305600 kHz
Test requirement not met in function test, file ../tests/kms_invalid_dotclock.c:104:
Test requirement: valid_connectors
No suitable connectors found
SKIP (0.294s)
Dmesg
<6> [456.498864] Console: switching to colour dummy device 80x25
<6> [456.498903] [IGT] kms_invalid_dotclock: executing
<7> [456.510050] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-1]
<7> [456.510110] [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-1]
<7> [456.510154] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-1] disconnected
<7> [456.510374] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:291:HDMI-A-1]
<7> [456.510411] [drm:intel_hdmi_detect [i915]] [CONNECTOR:291:HDMI-A-1]
<7> [456.510450] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:291:HDMI-A-1] disconnected
<7> [456.510835] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:276:eDP-1]
<7> [456.510866] [drm:intel_dp_detect [i915]] [CONNECTOR:276:eDP-1]
<7> [456.510897] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
<7> [456.510928] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000
<7> [456.510956] [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000
<7> [456.511721] [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 01 11 01 00 01 00 01 80 00 01 06 00 08 00 00
<7> [456.511747] [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0
<7> [456.512209] [drm:intel_dp_detect [i915]] [ENCODER:275:DDI A] MST support? port: no, sink: no, modparam: yes
<7> [456.512660] [drm:drm_add_display_info] non_desktop set to 0
<7> [456.512673] [drm:drm_add_edid_modes] ELD: no CEA Extension found
<7> [456.512675] [drm:drm_add_display_info] non_desktop set to 0
<7> [456.512698] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:276:eDP-1] probed modes :
<7> [456.512701] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 90 214000 1920 1936 1952 2104 1080 1083 1097 1128 0x48 0xa
<7> [456.512703] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 40 214000 1920 1936 1952 2104 1080 1083 1097 2532 0x40 0xa
<7> [456.512724] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-1]
<7> [456.512753] [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-1]
<7> [456.512789] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-1] disconnected
<7> [456.512799] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:291:HDMI-A-1]
<7> [456.512827] [drm:intel_hdmi_detect [i915]] [CONNECTOR:291:HDMI-A-1]
<7> [456.512865] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:291:HDMI-A-1] disconnected
<7> [456.512885] [drm:drm_mode_setcrtc] [CRTC:91:pipe A]
<7> [456.512963] [drm:intel_atomic_check [i915]] New cdclk calculated to be logical 172800 kHz, actual 172800 kHz
<7> [456.512995] [drm:intel_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0
<7> [456.513068] [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb (   0 -  972) -> (   0 -    0), size  972 ->    0
<7> [456.513086] [drm:skl_compute_wm [i915]] [PLANE:87:cursor A] ddb ( 972 - 1024) -> (   0 -    0), size   52 ->    0
<7> [456.513115] [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A]   level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm
<7> [456.513136] [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A]   lines    1,   7,   8,   8,  11,  13,  13,  15,   0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0
<7> [456.513156] [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A]  blocks   13, 113, 129, 129, 177, 209, 209, 241,  27 ->    0,   0,   0,   0,   0,   0,   0,   0,   0
<7> [456.513179] [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb   16, 126, 143, 143, 196, 231, 231, 267,   0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0
<7> [456.513223] [drm:intel_bw_atomic_check [i915]] pipe A data rate 0 num active planes 0
<7> [456.513260] [drm:intel_dump_pipe_config [i915]] [CRTC:91:pipe A] enable: no [modeset]
<7> [456.513295] [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no
<7> [456.513326] [drm:intel_dump_pipe_config [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no
<7> [456.513358] [drm:intel_dump_pipe_config [i915]] [PLANE:47:plane 3A] fb: [NOFB], visible: no
<7> [456.513393] [drm:intel_dump_pipe_config [i915]] [PLANE:55:plane 4A] fb: [NOFB], visible: no
<7> [456.513429] [drm:intel_dump_pipe_config [i915]] [PLANE:63:plane 5A] fb: [NOFB], visible: no
<7> [456.513461] [drm:intel_dump_pipe_config [i915]] [PLANE:71:plane 6A] fb: [NOFB], visible: no
<7> [456.513493] [drm:intel_dump_pipe_config [i915]] [PLANE:79:plane 7A] fb: [NOFB], visible: no
<7> [456.513523] [drm:intel_dump_pipe_config [i915]] [PLANE:87:cursor A] fb: [NOFB], visible: no
<7> [456.520083] [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [456.520360] [drm:intel_edp_backlight_off [i915]] 
<7> [456.722130] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0
<7> [456.722316] [drm:intel_disable_pipe [i915]] disabling pipe A
<7> [456.728006] [drm:intel_edp_panel_off.part.35 [i915]] Turn [ENCODER:275:DDI A] panel power off
<7> [456.728199] [drm:intel_edp_panel_off.part.35 [i915]] Wait for panel power off time
<7> [456.728406] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000002 control 00000060
<7> [456.781044] [drm:wait_panel_status [i915]] Wait complete
<7> [456.781193] [drm:intel_power_well_disable [i915]] disabling DDI A IO
<7> [456.781319] [drm:intel_power_well_disable [i915]] disabling AUX A
<7> [456.781427] [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A
<7> [456.781528] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 91
<7> [456.781650] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0
<7> [456.781781] [drm:intel_atomic_commit_tail [i915]] [ENCODER:275:DDI A]
<7> [456.781890] [drm:intel_atomic_commit_tail [i915]] [ENCODER:281:DDI B]
<7> [456.781980] [drm:intel_atomic_commit_tail [i915]] [ENCODER:283:DP-MST A]
<7> [456.782119] [drm:intel_atomic_commit_tail [i915]] [ENCODER:284:DP-MST B]
<7> [456.782205] [drm:intel_atomic_commit_tail [i915]] [ENCODER:285:DP-MST C]
<7> [456.782285] [drm:intel_atomic_commit_tail [i915]] [ENCODER:286:DP-MST D]
<7> [456.782372] [drm:verify_connector_state [i915]] [CONNECTOR:276:eDP-1]
<7> [456.782609] [drm:verify_single_dpll_state.isra.112 [i915]] DPLL 0
<7> [456.782770] [drm:verify_single_dpll_state.isra.112 [i915]] DPLL 1
<7> [456.782912] [drm:verify_single_dpll_state.isra.112 [i915]] TBT PLL
<7> [456.783060] [drm:intel_atomic_commit_tail [i915]] [CRTC:91:pipe A]
<7> [456.783468] [drm:intel_power_well_disable [i915]] disabling DC off
<7> [456.783579] [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [456.783674] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
<7> [456.785934] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010
<7> [456.786046] [drm:intel_power_well_disable [i915]] disabling always-on
<7> [456.786224] [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:275:DDI A] - long
<7> [456.786364] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [456.786541] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:275:DDI A]
<7> [456.786558] [drm:drm_mode_setcrtc] [CRTC:152:pipe B]
<7> [456.787252] i915 Wakeref last acquired:
   track_intel_runtime_pm_wakeref+0x14/0x90 [i915]
   intel_atomic_commit+0x32/0x2f0 [i915]
   drm_atomic_helper_set_config+0x61/0x90
   drm_mode_setcrtc+0x199/0x710
   drm_ioctl_kernel+0x83/0xf0
   drm_ioctl+0x2f3/0x3b0
   do_vfs_ioctl+0xa0/0x6f0
   ksys_ioctl+0x35/0x60
<7> [456.787696] i915 Wakeref last released:
   __untrack_all_wakerefs+0x67/0x70 [i915]
   __intel_wakeref_dec_and_check_tracking+0x61/0x80 [i915]
   __intel_runtime_pm_put+0x11a/0x260 [i915]
   intel_atomic_commit_tail+0x7b1/0x1570 [i915]
   intel_atomic_commit+0x273/0x2f0 [i915]
   set_property_atomic+0x11c/0x150
   drm_mode_obj_set_property_ioctl+0x111/0x1d0
   drm_ioctl_kernel+0x83/0xf0
<7> [456.787702] i915 Wakeref count: 15
<7> [456.788257] i915 Wakeref x4 taken at:
   track_intel_runtime_pm_wakeref+0x14/0x90 [i915]
   intel_display_power_get+0x1f/0x60 [i915]
   modeset_get_crtc_power_domains+0x120/0x140 [i915]
   intel_atomic_commit_tail+0xcf/0x1570 [i915]
   intel_atomic_commit+0x273/0x2f0 [i915]
   drm_client_modeset_commit_atomic+0x18b/0x220
   drm_client_modeset_commit_force+0x52/0x1b0
   drm_fb_helper_restore_fbdev_mode_unlocked+0x42/0x90
<7> [456.788862] i915 Wakeref x1 taken at:
   track_intel_runtime_pm_wakeref+0x14/0x90 [i915]
   intel_display_power_get+0x1f/0x60 [i915]
   edp_panel_vdd_on+0xd5/0x210 [i915]
   intel_dp_aux_xfer+0xeb/0x920 [i915]
   intel_dp_aux_transfer+0x124/0x200 [i915]
   drm_dp_dpcd_access+0x76/0x110
   drm_dp_dpcd_write+0x21/0x90
   intel_psr_disable_locked+0xed/0x180 [i915]
<7> [456.789392] i915 Wakeref x4 taken at:
   track_intel_runtime_pm_wakeref+0x14/0x90 [i915]
   intel_display_power_get+0x1f/0x60 [i915]
   modeset_get_crtc_power_domains+0x120/0x140 [i915]
   intel_atomic_commit_tail+0xcf/0x1570 [i915]
   intel_atomic_commit+0x273/0x2f0 [i915]
   drm_atomic_helper_set_config+0x61/0x90
   drm_mode_setcrtc+0x199/0x710
   drm_ioctl_kernel+0x83/0xf0
<7> [456.790178] i915 Wakeref x2 taken at:
   track_intel_runtime_pm_wakeref+0x14/0x90 [i915]
   intel_display_power_get+0x1f/0x60 [i915]
   intel_ddi_pre_pll_enable+0x6e/0x120 [i915]
   intel_encoders_pre_pll_enable.isra.21+0x61/0x80 [i915]
   haswell_crtc_enable+0x5c/0x760 [i915]
   intel_update_crtc+0x52/0x3c0 [i915]
   skl_commit_modeset_enables+0x25d/0x2a0 [i915]
   intel_atomic_commit_tail+0x26b/0x1570 [i915]
<7> [456.790907] i915 Wakeref x2 taken at:
   track_intel_runtime_pm_wakeref+0x14/0x90 [i915]
   intel_display_power_get+0x1f/0x60 [i915]
   intel_ddi_pre_enable+0x531/0xd20 [i915]
   intel_encoders_pre_enable.isra.22+0x61/0x80 [i915]
   haswell_crtc_enable+0x82/0x760 [i915]
   intel_update_crtc+0x52/0x3c0 [i915]
   skl_commit_modeset_enables+0x25d/0x2a0 [i915]
   intel_atomic_commit_tail+0x26b/0x1570 [i915]
<7> [456.791597] i915 Wakeref x2 taken at:
   track_intel_runtime_pm_wakeref+0x14/0x90 [i915]
   intel_display_power_get+0x1f/0x60 [i915]
   edp_panel_vdd_on+0xd5/0x210 [i915]
   intel_dp_aux_xfer+0xeb/0x920 [i915]
   intel_dp_aux_transfer+0x124/0x200 [i915]
   drm_dp_dpcd_access+0x76/0x110
   drm_dp_dpcd_write+0x21/0x90
   intel_dp_sink_dpms+0x4f/0x100 [i915]
<7> [456.791738] [drm:drm_mode_setcrtc] [CRTC:213:pipe C]
<7> [456.792147] [drm:drm_mode_setcrtc] [CRTC:274:pipe D]
<6> [456.796321] [IGT] kms_invalid_dotclock: exiting, ret=77
<5> [456.796874] Setting dangerous option reset - tainting kernel
<7> [456.799290] [drm:intel_atomic_check [i915]] [CONNECTOR:276:eDP-1] Limiting display bpp to 18 instead of EDID bpp 18, requested bpp 36, max platform bpp 36
<7> [456.799379] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 2 max rate 270000 max bpp 18 pixel clock 214000KHz
<7> [456.799452] [drm:intel_dp_compute_config [i915]] Force DSC en = 0
<7> [456.799520] [drm:intel_dp_compute_config [i915]] DP lane count 2 clock 270000 bpp 18
<7> [456.799587] [drm:intel_dp_compute_config [i915]] DP link rate required 481500 available 540000
<7> [456.799665] [drm:intel_atomic_check [i915]] hw max bpp: 18, pipe bpp: 18, dithering: 1
<7> [456.799735] [drm:pipe_config_mismatch [i915]] fastset mismatch in base.adjusted_mode.crtc_hdisplay (expected 0, found 1920)
<7> [456.799804] [drm:pipe_config_mismatch [i915]] fastset mismatch in base.adjusted_mode.crtc_htotal (expected 0, found 2104)
<7> [456.799866] [drm:pipe_config_mismatch [i915]] fastset mismatch in base.adjusted_mode.crtc_hblank_start (expected 0, found 1920)
<7> [456.799924] [drm:pipe_config_mismatch [i915]] fastset mismatch in base.adjusted_mode.crtc_hblank_end (expected 0, found 2104)
<7> [456.799991] [drm:pipe_config_mismatch [i915]] fastset mismatch in base.adjusted_mode.crtc_hsync_start (expected 0, found 1936)
<7> [456.800088] [drm:pipe_config_mismatch [i915]] fastset mismatch in base.adjusted_mode.crtc_hsync_end (expected 0, found 1952)
<7> [456.800146] [drm:pipe_config_mismatch [i915]] fastset mismatch in base.adjusted_mode.crtc_vdisplay (expected 0, found 1080)
<7> [456.800207] [drm:pipe_config_mismatch [i915]] fastset mismatch in base.adjusted_mode.crtc_vtotal (expected 0, found 1128)
<7> [456.800268] [drm:pipe_config_mismatch [i915]] fastset mismatch in base.adjusted_mode.crtc_vblank_start (expected 0, found 1080)
<7> [456.800331] [drm:pipe_config_mismatch [i915]] fastset mismatch in base.adjusted_mode.crtc_vblank_end (expected 0, found 1128)
<7> [456.800394] [drm:pipe_config_mismatch [i915]] fastset mismatch in base.adjusted_mode.crtc_vsync_start (expected 0, found 1083)
<7> [456.800452] [drm:pipe_config_mismatch [i915]] fastset mismatch in base.adjusted_mode.crtc_vsync_end (expected 0, found 1097)
<7> [456.800513] [drm:pipe_config_mismatch [i915]] fastset mismatch in base.adjusted_mode.flags (2) (expected 0, found 2)
<7> [456.800551] [drm:pipe_config_mismatch [i915]] fastset mismatch in base.adjusted_mode.flags (8) (expected 0, found 8)
<7> [456.800659] [drm:pipe_config_mismatch [i915]] fastset mismatch in base.adjusted_mode.crtc_clock (expected 0, found 214000)
<7> [456.800759] [drm:intel_atomic_check [i915]] New cdclk calculated to be logical 172800 kHz, actual 172800 kHz
<7> [456.800833] [drm:intel_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0
<7> [456.800915] [drm:intel_find_shared_dpll [i915]] [CRTC:91:pipe A] allocated DPLL 0
<7> [456.800989] [drm:intel_reference_shared_dpll.isra.10 [i915]] using DPLL 0 for pipe A
<7> [456.801086] [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb (   0 -    0) -> (   0 -  972), size    0 ->  972
<7> [456.801138] [drm:skl_compute_wm [i915]] [PLANE:87:cursor A] ddb (   0 -    0) -> ( 972 - 1024), size    0 ->   52
<7> [456.801181] [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm
<7> [456.801212] [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A]   lines    0,   0,   0,   0,   0,   0,   0,   0,   0 ->    1,   7,   8,   8,  11,  13,  13,  15,   0
<7> [456.801241] [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A]  blocks    0,   0,   0,   0,   0,   0,   0,   0,   0 ->   13, 113, 129, 129, 177, 209, 209, 241,  27
<7> [456.801271] [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0 ->   16, 126, 143, 143, 196, 231, 231, 267,   0
<7> [456.801334] [drm:intel_bw_atomic_check [i915]] pipe A data rate 856000 num active planes 1
<7> [456.801377] [drm:intel_dump_pipe_config [i915]] [CRTC:91:pipe A] enable: yes [modeset]
<7> [456.801420] [drm:intel_dump_pipe_config [i915]] active: yes, output_types: EDP (0x100), output format: RGB
<7> [456.801460] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 18, dithering: 1
<7> [456.801498] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 2; gmch_m: 7479842, gmch_n: 8388608, link_m: 415546, link_n: 524288, tu: 64
<7> [456.801539] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7> [456.801581] [drm:intel_dump_pipe_config [i915]] requested mode:
<7> [456.801586] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 90 214000 1920 1936 1952 2104 1080 1083 1097 1128 0x48 0xa
<7> [456.801626] [drm:intel_dump_pipe_config [i915]] adjusted mode:
<7> [456.801630] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 90 214000 1920 1936 1952 2104 1080 1083 1097 1128 0x48 0xa
<7> [456.801671] [drm:intel_dump_pipe_config [i915]] crtc timings: 214000 1920 1936 1952 2104 1080 1083 1097 1128, type: 0x48 flags: 0xa
<7> [456.801711] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1920x1080, pixel rate 214000
<7> [456.801750] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
<7> [456.801801] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled, force thru: no
<7> [456.801845] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
<7> [456.801897] [drm:icl_dump_hw_state [i915]] dpll_hw_state: cfgcr0: 0x1c001a5, cfgcr1: 0x88, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0
<7> [456.801942] [drm:intel_dump_pipe_config [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [456.801990] [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 1A] fb: [FB:297] 1920x1080 format = XR24 little-endian (0x34325258), visible: yes
<7> [456.802108] [drm:intel_dump_pipe_config [i915]] 	rotation: 0x1, scaler: -1
<7> [456.802178] [drm:intel_dump_pipe_config [i915]] 	src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0
<7> [456.802239] [drm:intel_dump_pipe_config [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no
<7> [456.802296] [drm:intel_dump_pipe_config [i915]] [PLANE:47:plane 3A] fb: [NOFB], visible: no
<7> [456.802358] [drm:intel_dump_pipe_config [i915]] [PLANE:55:plane 4A] fb: [NOFB], visible: no
<7> [456.802414] [drm:intel_dump_pipe_config [i915]] [PLANE:63:plane 5A] fb: [NOFB], visible: no
<7> [456.802456] [drm:intel_dump_pipe_config [i915]] [PLANE:71:plane 6A] fb: [NOFB], visible: no
<7> [456.802496] [drm:intel_dump_pipe_config [i915]] [PLANE:79:plane 7A] fb: [NOFB], visible: no
<7> [456.802537] [drm:intel_dump_pipe_config [i915]] [PLANE:87:cursor A] fb: [NOFB], visible: no
<7> [456.802770] [drm:intel_power_well_enable [i915]] enabling always-on
<7> [456.802814] [drm:intel_power_well_enable [i915]] enabling DC off
<7> [456.803421] [drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00
<7> [456.803554] [drm:intel_combo_phy_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [456.803622] [drm:intel_combo_phy_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [456.803687] [drm:intel_atomic_commit_tail [i915]] [ENCODER:275:DDI A]
<7> [456.803718] [drm:intel_atomic_commit_tail [i915]] [ENCODER:281:DDI B]
<7> [456.803751] [drm:intel_atomic_commit_tail [i915]] [ENCODER:283:DP-MST A]
<7> [456.803787] [drm:intel_atomic_commit_tail [i915]] [ENCODER:284:DP-MST B]
<7> [456.803819] [drm:intel_atomic_commit_tail [i915]] [ENCODER:285:DP-MST C]
<7> [456.803855] [drm:intel_atomic_commit_tail [i915]] [ENCODER:286:DP-MST D]
<7> [456.803891] [drm:verify_single_dpll_state.isra.112 [i915]] DPLL 0
<7> [456.803935] [drm:verify_single_dpll_state.isra.112 [i915]] DPLL 1
<7> [456.803978] [drm:verify_single_dpll_state.isra.112 [i915]] TBT PLL
<7> [456.804058] [drm:intel_power_well_enable [i915]] enabling AUX A
<7> [456.804122] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 91
<7> [456.804171] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0
<7> [456.804270] [drm:edp_panel_on [i915]] Turn [ENCODER:275:DDI A] panel power on
<7> [456.804333] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle
<7> [457.442269] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000060
<7> [457.442378] [drm:wait_panel_status [i915]] Wait complete
<7> [457.442544] [drm:edp_panel_on [i915]] Wait for panel power on
<7> [457.442764] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000063
<7> [457.510755] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010
<7> [457.510863] [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:275:DDI A] - long
<7> [457.510966] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [457.511116] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:275:DDI A]
<7> [457.655017] [drm:wait_panel_status [i915]] Wait complete
<7> [457.655193] [drm:intel_power_well_enable [i915]] enabling DDI A IO
<7> [457.655575] [drm:edp_panel_vdd_on [i915]] Turning [ENCODER:275:DDI A] VDD on
<7> [457.655884] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [457.657136] [drm:intel_dp_start_link_train [i915]] Using LINK_RATE_SET value 03
<7> [457.658428] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0
<7> [457.658512] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
<7> [457.658599] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1
<7> [457.659899] [drm:intel_dp_start_link_train [i915]] clock recovery OK
<7> [457.659998] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS2
<7> [457.661668] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful
<7> [457.661975] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:276:eDP-1] Link Training Passed at Link Rate = 270000, Lane count = 2
<7> [457.662573] [drm:intel_enable_pipe [i915]] enabling pipe A
<7> [457.662803] [drm:intel_edp_backlight_on [i915]] 
<7> [457.662901] [drm:intel_panel_enable_backlight [i915]] pipe A
<7> [457.663165] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 96000
<7> [457.663616] [drm:intel_psr_enable_locked [i915]] Enabling PSR2
<7> [457.664888] [drm:intel_enable_ddi [i915]] Panel doesn't support DRRS
<7> [457.675372] [drm:intel_fbc_enable [i915]] reserved 16588800 bytes of contiguous stolen space for FBC, threshold: 1
<7> [457.675400] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A
<7> [457.685168] [drm:verify_connector_state [i915]] [CONNECTOR:276:eDP-1]
<7> [457.685243] [drm:intel_atomic_commit_tail [i915]] [CRTC:91:pipe A]
<7> [457.685380] [drm:verify_single_dpll_state.isra.112 [i915]] DPLL 0
<6> [457.685738] Console: switching to colour frame buffer device 240x67
Created at 2019-09-17 09:23:33