<5>[ 0.000000] Linux version 6.18.0-rc7-Patchwork_158055v1-gcc835cfc1699+ (kbuild@gfx-ci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Tue Nov 25 17:59:08 UTC 2025 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] Hygon HygonGenuine <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] zhaoxin Shanghai <6>[ 0.000000] x86/tme: not enabled by BIOS <4>[ 0.000000] x86/CPU: Running old microcode <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000060a39fff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000060a3a000-0x0000000063db1fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000063db2000-0x0000000063ed6fff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x0000000063ed7000-0x0000000063ffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x0000000063fff000-0x0000000063ffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000064000000-0x00000000787fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000000ffffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x63ffe000 ACPI 2.0=0x63ffe014 TPMFinalLog=0x63e0c000 SMBIOS=0x60b11000 MEMATTR=0x5bd90698 ESRT=0x5bda2798 MOKvar=0x60c46000 TPMEventLog=0x63f0e018 <6>[ 0.000000] efi: Remove mem300: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem302: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.6 present. <6>[ 0.000000] DMI: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024 <6>[ 0.000000] DMI: Memory slots populated: 8/8 <6>[ 0.000000] tsc: Detected 3400.000 MHz processor <6>[ 0.000000] tsc: Detected 3379.200 MHz TSC <7>[ 0.000011] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000013] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000016] last_pfn = 0x880000 max_arch_pfn = 0x400000000 <6>[ 0.000021] MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs <6>[ 0.000023] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.000605] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000606] last_pfn = 0x64000 max_arch_pfn = 0x400000000 <6>[ 0.005057] esrt: Reserving ESRT space from 0x000000005bda2798 to 0x000000005bda28c0. <7>[ 0.005068] e820: update [mem 0x5bda2000-0x5bda2fff] usable ==> reserved <6>[ 0.005092] Using GB pages for direct mapping <6>[ 0.005807] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes <6>[ 0.005810] printk: early log buf free: 258728(98%) <6>[ 0.005811] Secure boot disabled <6>[ 0.005814] ACPI: Early table checksum verification disabled <6>[ 0.005819] ACPI: RSDP 0x0000000063FFE014 000024 (v02 INTEL ) <6>[ 0.005824] ACPI: XSDT 0x0000000063F15228 000184 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005829] ACPI: FACP 0x0000000063FDC000 000114 (v06 INTEL MTL 00000002 01000013) <6>[ 0.005833] ACPI: DSDT 0x0000000063F55000 083F8A (v02 INTEL MTL 00000002 01000013) <6>[ 0.005835] ACPI: FACS 0x0000000063DF2000 000040 <6>[ 0.005837] ACPI: SSDT 0x0000000063FFC000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.005838] ACPI: SSDT 0x0000000063FFB000 00070D (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.005840] ACPI: SSDT 0x0000000063FFA000 0005E4 (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.005841] ACPI: SSDT 0x0000000063FF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.005843] ACPI: SSDT 0x0000000063FF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.005844] ACPI: SSDT 0x0000000063FF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.005846] ACPI: SSDT 0x0000000063FF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.005847] ACPI: SSDT 0x0000000063FF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.005849] ACPI: SSDT 0x0000000063FF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.005850] ACPI: SSDT 0x0000000063FED000 003BC8 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.005852] ACPI: DTPR 0x0000000063FEC000 000098 (v01 00000000 00000000) <6>[ 0.005854] ACPI: SSDT 0x0000000063FEB000 000D03 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.005855] ACPI: SSDT 0x0000000063FE8000 002494 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.005857] ACPI: SSDT 0x0000000063FDE000 009AB7 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.005858] ACPI: SSDT 0x0000000063FDD000 0000F9 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.005860] ACPI: HPET 0x0000000063FDB000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005861] ACPI: APIC 0x0000000063FDA000 000358 (v05 INTEL MTL 00000002 01000013) <6>[ 0.005863] ACPI: MCFG 0x0000000063FD9000 00003C (v01 INTEL MTL 00000002 01000013) <6>[ 0.005864] ACPI: SSDT 0x0000000063F45000 00FCEF (v02 INTEL MtlP_Rvp 00001000 INTL 20210930) <6>[ 0.005866] ACPI: SSDT 0x0000000063F43000 00147F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.005867] ACPI: SSDT 0x0000000063F3E000 00389C (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.005869] ACPI: SSDT 0x0000000063F38000 00535A (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.005870] ACPI: SSDT 0x0000000063FFD000 00060E (v02 INTEL Tpm2Tabl 00001000 INTL 20210930) <6>[ 0.005872] ACPI: TPM2 0x0000000063F37000 00004C (v04 INTEL MTL 00000002 01000013) <6>[ 0.005873] ACPI: LPIT 0x0000000063F36000 0000CC (v01 INTEL MTL 00000002 01000013) <6>[ 0.005875] ACPI: WSMT 0x0000000063F35000 000028 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005876] ACPI: SSDT 0x0000000063F34000 000CA6 (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.005878] ACPI: SSDT 0x0000000063F2E000 00587D (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.005879] ACPI: DBGP 0x0000000063F2D000 000034 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005881] ACPI: DBG2 0x0000000063F2C000 000054 (v00 INTEL MTL 00000002 01000013) <6>[ 0.005882] ACPI: NHLT 0x0000000063F2B000 00098B (v00 INTEL MTL 00000002 01000013) <6>[ 0.005884] ACPI: SSDT 0x0000000063F29000 001191 (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.005885] ACPI: SSDT 0x0000000063F23000 005CAE (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.005887] ACPI: ECDT 0x0000000063F22000 000069 (v01 MTL 00000002 01000013) <6>[ 0.005888] ACPI: DMAR 0x0000000063F21000 0000A8 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005890] ACPI: FPDT 0x0000000063F20000 000044 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005892] ACPI: SSDT 0x0000000063F1E000 001015 (v02 INTEL xh_mtlp3 00000000 INTL 20210930) <6>[ 0.005893] ACPI: SSDT 0x0000000063F1B000 00281A (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.005895] ACPI: SSDT 0x0000000063F18000 0028D3 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.005896] ACPI: SSDT 0x0000000063F16000 0011A0 (v02 INTEL St00Ssdt 00001000 INTL 20210930) <6>[ 0.005898] ACPI: ASF! 0x0000000063F42000 000074 (v32 INTEL MTL 00000002 01000013) <6>[ 0.005899] ACPI: PHAT 0x0000000063F14000 000810 (v01 INTEL MTL 00000005 MSFT 0100000D) <6>[ 0.005901] ACPI: BGRT 0x0000000063F13000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005902] ACPI: Reserving FACP table memory at [mem 0x63fdc000-0x63fdc113] <6>[ 0.005903] ACPI: Reserving DSDT table memory at [mem 0x63f55000-0x63fd8f89] <6>[ 0.005904] ACPI: Reserving FACS table memory at [mem 0x63df2000-0x63df203f] <6>[ 0.005904] ACPI: Reserving SSDT table memory at [mem 0x63ffc000-0x63ffc38b] <6>[ 0.005905] ACPI: Reserving SSDT table memory at [mem 0x63ffb000-0x63ffb70c] <6>[ 0.005905] ACPI: Reserving SSDT table memory at [mem 0x63ffa000-0x63ffa5e3] <6>[ 0.005905] ACPI: Reserving SSDT table memory at [mem 0x63ff9000-0x63ff91aa] <6>[ 0.005906] ACPI: Reserving SSDT table memory at [mem 0x63ff8000-0x63ff8393] <6>[ 0.005906] ACPI: Reserving SSDT table memory at [mem 0x63ff6000-0x63ff7bae] <6>[ 0.005906] ACPI: Reserving SSDT table memory at [mem 0x63ff4000-0x63ff561f] <6>[ 0.005907] ACPI: Reserving SSDT table memory at [mem 0x63ff2000-0x63ff3348] <6>[ 0.005907] ACPI: Reserving SSDT table memory at [mem 0x63ff1000-0x63ff1fba] <6>[ 0.005908] ACPI: Reserving SSDT table memory at [mem 0x63fed000-0x63ff0bc7] <6>[ 0.005908] ACPI: Reserving DTPR table memory at [mem 0x63fec000-0x63fec097] <6>[ 0.005908] ACPI: Reserving SSDT table memory at [mem 0x63feb000-0x63febd02] <6>[ 0.005909] ACPI: Reserving SSDT table memory at [mem 0x63fe8000-0x63fea493] <6>[ 0.005909] ACPI: Reserving SSDT table memory at [mem 0x63fde000-0x63fe7ab6] <6>[ 0.005909] ACPI: Reserving SSDT table memory at [mem 0x63fdd000-0x63fdd0f8] <6>[ 0.005910] ACPI: Reserving HPET table memory at [mem 0x63fdb000-0x63fdb037] <6>[ 0.005910] ACPI: Reserving APIC table memory at [mem 0x63fda000-0x63fda357] <6>[ 0.005911] ACPI: Reserving MCFG table memory at [mem 0x63fd9000-0x63fd903b] <6>[ 0.005911] ACPI: Reserving SSDT table memory at [mem 0x63f45000-0x63f54cee] <6>[ 0.005911] ACPI: Reserving SSDT table memory at [mem 0x63f43000-0x63f4447e] <6>[ 0.005912] ACPI: Reserving SSDT table memory at [mem 0x63f3e000-0x63f4189b] <6>[ 0.005912] ACPI: Reserving SSDT table memory at [mem 0x63f38000-0x63f3d359] <6>[ 0.005912] ACPI: Reserving SSDT table memory at [mem 0x63ffd000-0x63ffd60d] <6>[ 0.005913] ACPI: Reserving TPM2 table memory at [mem 0x63f37000-0x63f3704b] <6>[ 0.005913] ACPI: Reserving LPIT table memory at [mem 0x63f36000-0x63f360cb] <6>[ 0.005913] ACPI: Reserving WSMT table memory at [mem 0x63f35000-0x63f35027] <6>[ 0.005914] ACPI: Reserving SSDT table memory at [mem 0x63f34000-0x63f34ca5] <6>[ 0.005914] ACPI: Reserving SSDT table memory at [mem 0x63f2e000-0x63f3387c] <6>[ 0.005915] ACPI: Reserving DBGP table memory at [mem 0x63f2d000-0x63f2d033] <6>[ 0.005915] ACPI: Reserving DBG2 table memory at [mem 0x63f2c000-0x63f2c053] <6>[ 0.005915] ACPI: Reserving NHLT table memory at [mem 0x63f2b000-0x63f2b98a] <6>[ 0.005916] ACPI: Reserving SSDT table memory at [mem 0x63f29000-0x63f2a190] <6>[ 0.005916] ACPI: Reserving SSDT table memory at [mem 0x63f23000-0x63f28cad] <6>[ 0.005916] ACPI: Reserving ECDT table memory at [mem 0x63f22000-0x63f22068] <6>[ 0.005917] ACPI: Reserving DMAR table memory at [mem 0x63f21000-0x63f210a7] <6>[ 0.005917] ACPI: Reserving FPDT table memory at [mem 0x63f20000-0x63f20043] <6>[ 0.005918] ACPI: Reserving SSDT table memory at [mem 0x63f1e000-0x63f1f014] <6>[ 0.005918] ACPI: Reserving SSDT table memory at [mem 0x63f1b000-0x63f1d819] <6>[ 0.005919] ACPI: Reserving SSDT table memory at [mem 0x63f18000-0x63f1a8d2] <6>[ 0.005919] ACPI: Reserving SSDT table memory at [mem 0x63f16000-0x63f1719f] <6>[ 0.005919] ACPI: Reserving ASF! table memory at [mem 0x63f42000-0x63f42073] <6>[ 0.005920] ACPI: Reserving PHAT table memory at [mem 0x63f14000-0x63f1480f] <6>[ 0.005920] ACPI: Reserving BGRT table memory at [mem 0x63f13000-0x63f13037] <6>[ 0.006014] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.006228] No NUMA configuration found <6>[ 0.006229] Faking a node at [mem 0x0000000000000000-0x000000087fffffff] <6>[ 0.006235] NODE_DATA(0) allocated [mem 0x87fb52e40-0x87fb7dfff] <6>[ 0.006381] Zone ranges: <6>[ 0.006383] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.006384] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.006385] Normal [mem 0x0000000100000000-0x000000087fffffff] <6>[ 0.006386] Device empty <6>[ 0.006386] Movable zone start for each node <6>[ 0.006387] Early memory node ranges <6>[ 0.006387] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.006389] node 0: [mem 0x0000000000100000-0x0000000060a39fff] <6>[ 0.006389] node 0: [mem 0x0000000063fff000-0x0000000063ffffff] <6>[ 0.006389] node 0: [mem 0x0000000100000000-0x000000087fffffff] <6>[ 0.006391] Initmem setup node 0 [mem 0x0000000000001000-0x000000087fffffff] <6>[ 0.006397] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.006419] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.008600] On node 0, zone DMA32: 13765 pages in unavailable ranges <6>[ 0.053700] On node 0, zone Normal: 16384 pages in unavailable ranges <6>[ 0.054174] ACPI: PM-Timer IO Port: 0x1808 <4>[ 0.054179] CPU topo: Boot CPU APIC ID not the first enumerated APIC ID: 20 != 10 <4>[ 0.054180] CPU topo: [Firmware Bug]: APIC enumeration order not specification compliant <6>[ 0.054183] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.054228] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.054230] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.054232] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.054235] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.054236] ACPI: HPET id: 0x8086a201 base: 0xfed00000 <7>[ 0.054249] e820: update [mem 0x5bd41000-0x5bd5bfff] usable ==> reserved <6>[ 0.054258] TSC deadline timer available <6>[ 0.054260] CPU topo: Max. logical packages: 1 <6>[ 0.054261] CPU topo: Max. logical dies: 1 <6>[ 0.054261] CPU topo: Max. dies per package: 1 <6>[ 0.054263] CPU topo: Max. threads per core: 2 <6>[ 0.054264] CPU topo: Num. cores per package: 16 <6>[ 0.054264] CPU topo: Num. threads per package: 22 <6>[ 0.054265] CPU topo: Allowing 22 present CPUs plus 0 hotplug CPUs <6>[ 0.054281] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.054283] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.054284] PM: hibernation: Registered nosave memory: [mem 0x5bd41000-0x5bd5bfff] <6>[ 0.054285] PM: hibernation: Registered nosave memory: [mem 0x5bda2000-0x5bda2fff] <6>[ 0.054286] PM: hibernation: Registered nosave memory: [mem 0x60a3a000-0x63ffefff] <6>[ 0.054288] PM: hibernation: Registered nosave memory: [mem 0x64000000-0xffffffff] <6>[ 0.054290] [mem 0x78800000-0xfed1ffff] available for PCI devices <6>[ 0.054291] Booting paravirtualized kernel on bare hardware <6>[ 0.054294] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.054305] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:22 nr_cpu_ids:22 nr_node_ids:1 <6>[ 0.055794] percpu: Embedded 86 pages/cpu s229376 r8192 d114688 u524288 <7>[ 0.055799] pcpu-alloc: s229376 r8192 d114688 u524288 alloc=1*2097152 <7>[ 0.055800] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 <7>[ 0.055803] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 <7>[ 0.055805] pcpu-alloc: [0] 16 17 18 19 [0] 20 21 -- -- <5>[ 0.055824] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <7>[ 0.055935] blacklisting initcall simpledrm_platform_driver_init <5>[ 0.055954] random: crng init done <6>[ 0.058776] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.060176] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.060317] software IO TLB: area num 32. <6>[ 0.071789] Fallback order for Node 0: 0 <6>[ 0.071794] Built 1 zonelists, mobility grouping on. Total pages: 8260057 <6>[ 0.071795] Policy zone: Normal <6>[ 0.071808] mem auto-init: stack:off, heap alloc:on, heap free:off <6>[ 0.071809] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.071813] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) <6>[ 0.073265] stackdepot: allocating space for 8192 stack pools via memblock <4>[ 0.115150] ********************************************************** <4>[ 0.115151] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.115151] ** ** <4>[ 0.115152] ** This system shows unhashed kernel memory addresses ** <4>[ 0.115152] ** via the console, logs, and other interfaces. This ** <4>[ 0.115152] ** might reduce the security of your system. ** <4>[ 0.115152] ** ** <4>[ 0.115153] ** If you see this message and you are not debugging ** <4>[ 0.115153] ** the kernel, report this immediately to your system ** <4>[ 0.115153] ** administrator! ** <4>[ 0.115153] ** ** <4>[ 0.115153] ** Use hash_pointers=always to force this mode off ** <4>[ 0.115154] ** ** <4>[ 0.115154] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.115154] ********************************************************** <6>[ 0.116615] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=22, Nodes=1 <6>[ 0.127149] ftrace: allocating 60565 entries in 240 pages <6>[ 0.127151] ftrace: allocated 240 pages with 4 groups <6>[ 0.128926] Dynamic Preempt: voluntary <6>[ 0.129992] Running RCU self tests <6>[ 0.129992] Running RCU synchronous self tests <6>[ 0.129993] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.129994] rcu: RCU lockdep checking is enabled. <6>[ 0.129994] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=22. <6>[ 0.129995] Trampoline variant of Tasks RCU enabled. <6>[ 0.129995] Rude variant of Tasks RCU enabled. <6>[ 0.129995] Tracing variant of Tasks RCU enabled. <6>[ 0.129996] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.129996] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=22 <6>[ 0.130124] Running RCU synchronous self tests <6>[ 0.130134] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22. <6>[ 0.130139] RCU Tasks Rude: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22. <6>[ 0.130143] RCU Tasks Trace: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22. <6>[ 0.141992] NR_IRQS: 524544, nr_irqs: 2232, preallocated irqs: 16 <6>[ 0.142563] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.143172] Console: colour dummy device 80x25 <6>[ 0.143183] printk: legacy console [tty0] enabled <6>[ 0.144328] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <6>[ 0.144336] ... MAX_LOCKDEP_SUBCLASSES: 8 <6>[ 0.144340] ... MAX_LOCK_DEPTH: 48 <6>[ 0.144344] ... MAX_LOCKDEP_KEYS: 8192 <6>[ 0.144348] ... CLASSHASH_SIZE: 4096 <6>[ 0.144351] ... MAX_LOCKDEP_ENTRIES: 524288 <6>[ 0.144355] ... MAX_LOCKDEP_CHAINS: 524288 <6>[ 0.144359] ... CHAINHASH_SIZE: 262144 <6>[ 0.144363] memory used by lock dependency info: 54145 kB <6>[ 0.144367] memory used for stack traces: 4224 kB <6>[ 0.144371] per task-struct memory footprint: 1920 bytes <6>[ 0.144443] ACPI: Core revision 20250807 <6>[ 0.145448] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 0.145505] APIC: Switch to symmetric I/O mode setup <6>[ 0.145511] DMAR: Host address width 42 <6>[ 0.145515] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 0.145551] DMAR: dmar0: reg_base_addr fc800000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0ef5e <6>[ 0.145559] DMAR: DRHD base: 0x000000fc801000 flags: 0x1 <6>[ 0.145579] DMAR: dmar1: reg_base_addr fc801000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0efde <6>[ 0.145587] DMAR: SATC flags: 0x1 <6>[ 0.145597] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc801000 IOMMU 1 <6>[ 0.145603] DMAR-IR: HPET id 0 under DRHD base 0xfc801000 <6>[ 0.145607] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 0.147310] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 0.151736] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 0.151756] Calibrating delay loop (skipped), value calculated using timer frequency.. 6758.40 BogoMIPS (lpj=3379200) <6>[ 0.151823] CPU0: Thermal monitoring enabled (TM1) <6>[ 0.151829] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 0.152031] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 0.152036] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 0.152045] process: using mwait in idle threads <6>[ 0.152052] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto <6>[ 0.152064] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 0.152071] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 0.152076] VMSCAPE: Mitigation: IBPB before exit to userspace <6>[ 0.152081] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 0.152089] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 0.152107] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 0.152113] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 0.152118] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 0.152123] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 0.152129] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 0.152135] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' <6>[ 0.152142] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 0.152147] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 0.152152] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 0.152157] x86/fpu: xstate_offset[12]: 856, xstate_sizes[12]: 24 <6>[ 0.152162] x86/fpu: Enabled xstate features 0x1a07, context size is 880 bytes, using 'compacted' format. <6>[ 0.152749] Freeing SMP alternatives memory: 56K <6>[ 0.152749] pid_max: default: 32768 minimum: 301 <6>[ 0.152749] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm <6>[ 0.152749] landlock: Up and running. <6>[ 0.152749] Yama: becoming mindful. <6>[ 0.152749] AppArmor: AppArmor initialized <6>[ 0.152749] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.152749] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.152749] Running RCU synchronous self tests <6>[ 0.152749] Running RCU synchronous self tests <6>[ 0.152749] smpboot: CPU0: Intel(R) Core(TM) Ultra 7 1003H (family: 0x6, model: 0xaa, stepping: 0x4) <6>[ 0.152749] Performance Events: XSAVE Architectural LBR, PEBS fmt5+-baseline, AnyThread deprecated, Meteorlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 0.152925] core: cpu_core PMU driver: <6>[ 0.152934] ... version: 5 <6>[ 0.152938] ... bit width: 48 <6>[ 0.152942] ... generic counters: 8 <6>[ 0.152946] ... generic bitmap: 00000000000000ff <6>[ 0.152951] ... fixed-purpose counters: 4 <6>[ 0.152954] ... fixed-purpose bitmap: 000000000000000f <6>[ 0.152959] ... value mask: 0000ffffffffffff <6>[ 0.152964] ... max period: 00007fffffffffff <6>[ 0.152968] ... global_ctrl mask: 0001000f000000ff <6>[ 0.153160] signal: max sigframe size: 3632 <6>[ 0.153194] Estimated ratio of average max frequency by base frequency (times 1024): 1445 <6>[ 0.153350] rcu: Hierarchical SRCU implementation. <6>[ 0.153355] rcu: Max phase no-delay instances is 400. <6>[ 0.153533] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level <6>[ 0.156331] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 0.157118] smp: Bringing up secondary CPUs ... <6>[ 0.157535] smpboot: x86: Booting SMP configuration: <6>[ 0.157542] .... node #0, CPUs: #1 #3 #6 #8 #10 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 <6>[ 0.010048] core: cpu_atom PMU driver: <6>[ 0.010048] ... version: 5 <6>[ 0.010048] ... bit width: 48 <6>[ 0.010048] ... generic counters: 8 <6>[ 0.010048] ... generic bitmap: 00000000000000ff <6>[ 0.010048] ... fixed-purpose counters: 3 <6>[ 0.010048] ... fixed-purpose bitmap: 0000000000000007 <6>[ 0.010048] ... value mask: 0000ffffffffffff <6>[ 0.010048] ... max period: 00007fffffffffff <6>[ 0.010048] ... global_ctrl mask: 00000007000000ff <5>[ 0.171783] #2 #4 #5 #7 #9 #11 <6>[ 0.177835] smp: Brought up 1 node, 22 CPUs <6>[ 0.177835] smpboot: Total of 22 processors activated (148684.80 BogoMIPS) <6>[ 0.180909] Memory: 32225736K/33040228K available (25405K kernel code, 5651K rwdata, 9512K rodata, 5704K init, 68232K bss, 779976K reserved, 0K cma-reserved) <6>[ 0.184975] devtmpfs: initialized <6>[ 0.185135] x86/mm: Memory block size: 128MB <6>[ 0.210803] ACPI: PM: Registering ACPI NVS region [mem 0x63db2000-0x63ed6fff] (1200128 bytes) <6>[ 0.211519] Running RCU synchronous self tests <6>[ 0.211537] Running RCU synchronous self tests <6>[ 0.211754] Running RCU Tasks wait API self tests <6>[ 0.211784] Running RCU Tasks Rude wait API self tests <6>[ 0.211784] Running RCU Tasks Trace wait API self tests <6>[ 0.224775] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.224983] posixtimers hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 0.225265] futex hash table entries: 8192 (1048576 bytes on 1 NUMA nodes, total 1024 KiB, linear). <6>[ 0.225881] pinctrl core: initialized pinctrl subsystem <6>[ 0.226609] PM: RTC time: 07:09:03, date: 2025-11-26 <6>[ 0.227501] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.228733] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.229127] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.229526] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.229588] audit: initializing netlink subsys (disabled) <5>[ 0.229627] audit: type=2000 audit(1764140942.077:1): state=initialized audit_enabled=0 res=1 <6>[ 0.230507] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.230509] thermal_sys: Registered thermal governor 'bang_bang' <6>[ 0.230516] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.230520] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.230525] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.230578] cpuidle: using governor ladder <6>[ 0.230578] cpuidle: using governor menu <6>[ 0.230858] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 0.231376] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 0.231407] PCI: Using configuration type 1 for base access <6>[ 0.231780] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.232045] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.232045] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 0.232045] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.232045] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.235516] raid6: skipped pq benchmark and selected avx2x4 <6>[ 0.235525] raid6: using avx2x2 recovery algorithm <6>[ 0.236183] fbcon: Taking over console <6>[ 0.236373] ACPI: Added _OSI(Module Device) <6>[ 0.236378] ACPI: Added _OSI(Processor Device) <6>[ 0.236382] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 0.243759] Callback from call_rcu_tasks_trace() invoked. <6>[ 0.872525] ACPI: 28 ACPI AML tables successfully acquired and loaded <6>[ 0.892414] ACPI: EC: EC started <6>[ 0.892429] ACPI: EC: interrupt blocked <6>[ 0.898107] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 0.898119] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 0.964214] Callback from call_rcu_tasks() invoked. <6>[ 1.183152] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.183161] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.257190] ACPI: Interpreter enabled <6>[ 1.257389] ACPI: PM: (supports S0 S4 S5) <6>[ 1.257399] ACPI: Using IOAPIC for interrupt routing <6>[ 1.268945] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 1.268965] PCI: Ignoring E820 reservations for host bridge windows <6>[ 1.319241] ACPI: Enabled 10 GPEs in block 00 to 7F <6>[ 1.319281] ACPI: Enabled 8 GPEs in block 80 to DF <6>[ 1.422028] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 1.729542] ACPI: \_SB_.PC00.RP01.PXP_: New power resource <6>[ 1.762179] ACPI: \_SB_.PC00.RP06.PXP_: New power resource <6>[ 1.769973] ACPI: \_SB_.PC00.RP07.PXP_: New power resource <6>[ 1.785332] ACPI: \_SB_.PC00.RP09.PXP_: New power resource <6>[ 1.791736] ACPI: \_SB_.PC00.RP10.PXP_: New power resource <6>[ 1.799343] ACPI: \_SB_.PC00.RP11.PXP_: New power resource <6>[ 1.806805] ACPI: \_SB_.PC00.RP12.PXP_: New power resource <6>[ 2.054719] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 2.055360] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 2.055931] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 2.200944] ACPI: \_TZ_.FN00: New power resource <6>[ 2.201578] ACPI: \_TZ_.FN01: New power resource <6>[ 2.202219] ACPI: \_TZ_.FN02: New power resource <6>[ 2.202219] ACPI: \_TZ_.FN03: New power resource <6>[ 2.202450] ACPI: \_TZ_.FN04: New power resource <6>[ 2.205819] ACPI: \PIN_: New power resource <6>[ 2.209400] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 2.209421] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] <6>[ 2.212191] acpi PNP0A08:00: _OSC: platform does not support [AER] <6>[ 2.217018] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME PCIeCapability LTR DPC] <6>[ 2.231107] PCI host bridge to bus 0000:00 <6>[ 2.231145] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 2.231153] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 2.231160] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 2.231168] pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff window] <6>[ 2.231175] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x3ffbfffffff window] <6>[ 2.231184] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 2.241717] pci 0000:00:00.0: [8086:7d01] type 00 class 0x060000 conventional PCI endpoint <6>[ 2.242915] pci 0000:00:02.0: [8086:7d55] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint <6>[ 2.242954] pci 0000:00:02.0: BAR 0 [mem 0x5018000000-0x5018ffffff 64bit pref] <6>[ 2.242963] pci 0000:00:02.0: BAR 2 [mem 0x4000000000-0x400fffffff 64bit pref] <6>[ 2.243002] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics <6>[ 2.243011] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 2.243062] pci 0000:00:02.0: PME# supported from D0 D3hot <6>[ 2.243130] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x00ffffff 64bit pref] <6>[ 2.243136] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x06ffffff 64bit pref]: contains BAR 0 for 7 VFs <6>[ 2.244688] pci 0000:00:04.0: [8086:7d03] type 00 class 0x118000 conventional PCI endpoint <6>[ 2.244731] pci 0000:00:04.0: BAR 0 [mem 0x501a280000-0x501a29ffff 64bit] <6>[ 2.246353] pci 0000:00:05.0: [8086:7d19] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint <6>[ 2.246381] pci 0000:00:05.0: BAR 0 [mem 0x5019000000-0x5019ffffff 64bit] <6>[ 2.246392] pci 0000:00:05.0: enabling Extended Tags <6>[ 2.247471] pci 0000:00:06.0: [8086:7ecb] type 01 class 0x060400 PCIe Root Port <6>[ 2.247501] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 2.247512] pci 0000:00:06.0: bridge window [mem 0x8c000000-0x8c0fffff] <6>[ 2.247629] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold <6>[ 2.247704] pci 0000:00:06.0: PTM enabled (root), 4ns granularity <6>[ 2.255605] pci 0000:00:07.0: [8086:7ec6] type 01 class 0x060400 PCIe Root Port <6>[ 2.255648] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 2.255664] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff] <6>[ 2.255685] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 2.255809] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 2.255895] pci 0000:00:07.0: PTM enabled (root), 4ns granularity <6>[ 2.264681] pci 0000:00:07.3: [8086:7ec7] type 01 class 0x060400 PCIe Root Port <6>[ 2.264723] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 2.264739] pci 0000:00:07.3: bridge window [mem 0x80000000-0x85ffffff] <6>[ 2.264761] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 2.264879] pci 0000:00:07.3: PME# supported from D0 D3hot D3cold <6>[ 2.264964] pci 0000:00:07.3: PTM enabled (root), 4ns granularity <6>[ 2.273415] pci 0000:00:08.0: [8086:7e4c] type 00 class 0x088000 conventional PCI endpoint <6>[ 2.273473] pci 0000:00:08.0: BAR 0 [mem 0x501a2e3000-0x501a2e3fff 64bit] <6>[ 2.274286] pci 0000:00:0a.0: [8086:7d0d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint <6>[ 2.274324] pci 0000:00:0a.0: BAR 0 [mem 0x501a240000-0x501a27ffff 64bit] <6>[ 2.274344] pci 0000:00:0a.0: enabling Extended Tags <6>[ 2.274739] pci 0000:00:0b.0: [8086:7d1d] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint <6>[ 2.274777] pci 0000:00:0b.0: BAR 0 [mem 0x5010000000-0x5017ffffff 64bit] <6>[ 2.274792] pci 0000:00:0b.0: BAR 4 [mem 0x501a2e2000-0x501a2e2fff 64bit] <6>[ 2.275671] pci 0000:00:0d.0: [8086:7ec0] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.275751] pci 0000:00:0d.0: BAR 0 [mem 0x501a2c0000-0x501a2cffff 64bit] <6>[ 2.275865] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 2.280255] pci 0000:00:0d.3: [8086:7ec3] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.280327] pci 0000:00:0d.3: BAR 0 [mem 0x501a200000-0x501a23ffff 64bit] <6>[ 2.280338] pci 0000:00:0d.3: BAR 2 [mem 0x501a2e1000-0x501a2e1fff 64bit] <6>[ 2.280397] pci 0000:00:0d.3: supports D1 D2 <6>[ 2.280401] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.282029] pci 0000:00:12.0: [8086:7e45] type 00 class 0x070000 conventional PCI endpoint <6>[ 2.282069] pci 0000:00:12.0: BAR 0 [mem 0x501a2b0000-0x501a2bffff 64bit] <6>[ 2.282121] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 2.285181] pci 0000:00:14.0: [8086:7e7d] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.285222] pci 0000:00:14.0: BAR 0 [mem 0x501a2a0000-0x501a2affff 64bit] <6>[ 2.285275] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 2.287647] pci 0000:00:14.2: [8086:7e7f] type 00 class 0x050000 conventional PCI endpoint <6>[ 2.287696] pci 0000:00:14.2: BAR 0 [mem 0x501a2d4000-0x501a2d7fff 64bit] <6>[ 2.287704] pci 0000:00:14.2: BAR 2 [mem 0x501a2e0000-0x501a2e0fff 64bit] <6>[ 2.288097] pci 0000:00:15.0: [8086:7e78] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.288177] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.299206] pci 0000:00:15.1: [8086:7e79] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.299266] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.310182] pci 0000:00:15.2: [8086:7e7a] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.310240] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.321181] pci 0000:00:15.3: [8086:7e7b] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.321239] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.332336] pci 0000:00:16.0: [8086:7e70] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.332390] pci 0000:00:16.0: BAR 0 [mem 0x501a2db000-0x501a2dbfff 64bit] <6>[ 2.332453] pci 0000:00:16.0: PME# supported from D3hot <6>[ 2.335413] pci 0000:00:16.3: [8086:7e73] type 00 class 0x070002 conventional PCI endpoint <6>[ 2.335455] pci 0000:00:16.3: BAR 0 [io 0x3020-0x3027] <6>[ 2.335461] pci 0000:00:16.3: BAR 1 [mem 0x8c121000-0x8c121fff] <6>[ 2.335728] pci 0000:00:19.0: [8086:7e50] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.335785] pci 0000:00:19.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.346217] pci 0000:00:19.1: [8086:7e51] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.346276] pci 0000:00:19.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.357184] pci 0000:00:1f.0: [8086:7e02] type 00 class 0x060100 conventional PCI endpoint <6>[ 2.358754] pci 0000:00:1f.3: [8086:7e28] type 00 class 0x040100 conventional PCI endpoint <6>[ 2.358869] pci 0000:00:1f.3: BAR 0 [mem 0x501a2d0000-0x501a2d3fff 64bit] <6>[ 2.358884] pci 0000:00:1f.3: BAR 4 [mem 0x501a000000-0x501a1fffff 64bit] <6>[ 2.359002] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 2.359506] pci 0000:00:1f.4: [8086:7e22] type 00 class 0x0c0500 conventional PCI endpoint <6>[ 2.359558] pci 0000:00:1f.4: BAR 0 [mem 0x501a2d8000-0x501a2d80ff 64bit] <6>[ 2.359569] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] <6>[ 2.360963] pci 0000:00:1f.5: [8086:7e23] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.361063] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] <6>[ 2.361322] pci 0000:00:1f.6: [8086:550a] type 00 class 0x020000 conventional PCI endpoint <6>[ 2.361403] pci 0000:00:1f.6: BAR 0 [mem 0x8c100000-0x8c11ffff] <6>[ 2.361485] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold <6>[ 2.363273] pci 0000:01:00.0: [15b7:501e] type 00 class 0x010802 PCIe Endpoint <6>[ 2.363336] pci 0000:01:00.0: BAR 0 [mem 0x8c000000-0x8c003fff 64bit] <6>[ 2.364812] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 2.365022] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 2.365217] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 2.751454] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1) <6>[ 7.232132] Low-power S0 idle used by default for system suspend <6>[ 7.331003] ACPI: EC: interrupt unblocked <6>[ 7.331023] ACPI: EC: event unblocked <6>[ 7.331751] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 7.331751] ACPI: EC: GPE=0x6e <6>[ 7.331751] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 7.331751] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 7.332854] iommu: Default domain type: Translated <6>[ 7.332854] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 7.337293] SCSI subsystem initialized <7>[ 7.338125] libata version 3.00 loaded. <6>[ 7.338125] ACPI: bus type USB registered <6>[ 7.338125] usbcore: registered new interface driver usbfs <6>[ 7.338125] usbcore: registered new interface driver hub <6>[ 7.338246] usbcore: registered new device driver usb <6>[ 7.338536] pps_core: LinuxPPS API ver. 1 registered <6>[ 7.338545] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 7.338588] PTP clock support registered <6>[ 7.339853] EDAC MC: Ver: 3.0.0 <6>[ 7.340860] efivars: Registered efivars operations <6>[ 7.343076] NetLabel: Initializing <6>[ 7.343086] NetLabel: domain hash size = 128 <6>[ 7.343095] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO <6>[ 7.343242] NetLabel: unlabeled traffic allowed by default <6>[ 7.343279] mctp: management component transport protocol core <6>[ 7.343290] NET: Registered PF_MCTP protocol family <6>[ 7.343365] PCI: Using ACPI for IRQ routing <7>[ 7.361219] PCI: pci_cache_line_size set to 64 bytes <6>[ 7.361411] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window <7>[ 7.361615] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 7.361630] e820: reserve RAM buffer [mem 0x5bd41000-0x5bffffff] <7>[ 7.361635] e820: reserve RAM buffer [mem 0x5bda2000-0x5bffffff] <7>[ 7.361640] e820: reserve RAM buffer [mem 0x60a3a000-0x63ffffff] <6>[ 7.362887] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 7.362887] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 7.362887] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 7.362887] vgaarb: loaded <6>[ 7.372196] clocksource: Switched to clocksource tsc-early <5>[ 7.380501] VFS: Disk quotas dquot_6.6.0 <6>[ 7.380553] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 7.382593] AppArmor: AppArmor Filesystem Enabled <6>[ 7.382943] pnp: PnP ACPI init <6>[ 7.384681] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 7.384704] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 7.385703] system 00:01: [io 0x1854-0x1857] has been reserved <6>[ 7.388339] system 00:03: [io 0x06a4] has been reserved <6>[ 7.388359] system 00:03: [io 0x06a0] has been reserved <4>[ 7.425521] pnp 00:04: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] <4>[ 7.425545] pnp 00:04: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] <6>[ 7.425809] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 7.425827] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 7.425848] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved <6>[ 7.425867] system 00:04: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 7.425886] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 7.425902] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 7.435155] system 00:05: [io 0x2000-0x20fe] has been reserved <4>[ 7.436922] pnp 00:07: disabling [mem 0x00000000-0x0009cfff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] <6>[ 7.442696] pnp: PnP ACPI: found 8 devices <6>[ 7.460985] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 7.461364] NET: Registered PF_INET protocol family <6>[ 7.461666] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 7.465978] tcp_listen_portaddr_hash hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 7.466201] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 7.466488] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 7.467809] TCP bind hash table entries: 65536 (order: 12, 9437184 bytes, vmalloc hugepage) <6>[ 7.469298] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 7.470185] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 7.471250] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 7.472464] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 7.472549] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2 <6>[ 7.472608] pci 0000:00:02.0: VF BAR 0 [mem 0x501b000000-0x5021ffffff 64bit pref]: assigned <6>[ 7.472629] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned <6>[ 7.472640] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff]: assigned <6>[ 7.472652] pci 0000:00:15.0: BAR 0 [mem 0x501a2d9000-0x501a2d9fff 64bit]: assigned <6>[ 7.472675] pci 0000:00:15.1: BAR 0 [mem 0x501a2da000-0x501a2dafff 64bit]: assigned <6>[ 7.472701] pci 0000:00:15.2: BAR 0 [mem 0x501a2dc000-0x501a2dcfff 64bit]: assigned <6>[ 7.472723] pci 0000:00:15.3: BAR 0 [mem 0x501a2dd000-0x501a2ddfff 64bit]: assigned <6>[ 7.472744] pci 0000:00:19.0: BAR 0 [mem 0x501a2de000-0x501a2defff 64bit]: assigned <6>[ 7.472770] pci 0000:00:19.1: BAR 0 [mem 0x501a2df000-0x501a2dffff 64bit]: assigned <6>[ 7.472795] pci 0000:00:1f.5: BAR 0 [mem 0x8c120000-0x8c120fff]: assigned <6>[ 7.472828] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 7.472842] pci 0000:00:06.0: bridge window [mem 0x8c000000-0x8c0fffff] <6>[ 7.472862] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 7.472886] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 7.472899] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff] <6>[ 7.472911] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 7.472928] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 7.472943] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff] <6>[ 7.472955] pci 0000:00:07.3: bridge window [mem 0x80000000-0x85ffffff] <6>[ 7.472968] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 7.472985] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 7.472995] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 7.473005] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 7.473015] pci_bus 0000:00: resource 7 [mem 0x80000000-0xbfffffff window] <6>[ 7.473026] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x3ffbfffffff window] <6>[ 7.473038] pci_bus 0000:01: resource 1 [mem 0x8c000000-0x8c0fffff] <6>[ 7.473052] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] <6>[ 7.473062] pci_bus 0000:02: resource 1 [mem 0x86000000-0x8bffffff] <6>[ 7.473072] pci_bus 0000:02: resource 2 [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 7.473084] pci_bus 0000:2c: resource 0 [io 0x5000-0x5fff] <6>[ 7.473093] pci_bus 0000:2c: resource 1 [mem 0x80000000-0x85ffffff] <6>[ 7.473103] pci_bus 0000:2c: resource 2 [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 7.475168] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 7.478169] PCI: CLS 0 bytes, default 64 <6>[ 7.478316] DMAR: No RMRR found <6>[ 7.478332] DMAR: No ATSR found <6>[ 7.478339] DMAR: dmar0: Using Queued invalidation <6>[ 7.478350] DMAR: dmar1: Using Queued invalidation <6>[ 7.479666] pci 0000:00:02.0: Adding to iommu group 0 <6>[ 7.481648] pci 0000:00:00.0: Adding to iommu group 1 <6>[ 7.481752] pci 0000:00:04.0: Adding to iommu group 2 <6>[ 7.481849] pci 0000:00:05.0: Adding to iommu group 3 <6>[ 7.481978] pci 0000:00:06.0: Adding to iommu group 4 <6>[ 7.482120] pci 0000:00:07.0: Adding to iommu group 5 <6>[ 7.482250] pci 0000:00:07.3: Adding to iommu group 6 <6>[ 7.482354] pci 0000:00:08.0: Adding to iommu group 7 <6>[ 7.482451] pci 0000:00:0a.0: Adding to iommu group 8 <6>[ 7.482556] pci 0000:00:0b.0: Adding to iommu group 9 <6>[ 7.482680] pci 0000:00:0d.0: Adding to iommu group 10 <6>[ 7.482751] pci 0000:00:0d.3: Adding to iommu group 10 <6>[ 7.482863] pci 0000:00:12.0: Adding to iommu group 11 <6>[ 7.482982] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 7.483054] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 7.483202] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 7.483273] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 7.483349] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 7.483423] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 7.483543] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 7.483618] pci 0000:00:16.3: Adding to iommu group 14 <6>[ 7.483733] pci 0000:00:19.0: Adding to iommu group 15 <6>[ 7.483808] pci 0000:00:19.1: Adding to iommu group 15 <6>[ 7.483963] pci 0000:00:1f.0: Adding to iommu group 16 <6>[ 7.484040] pci 0000:00:1f.3: Adding to iommu group 16 <6>[ 7.484117] pci 0000:00:1f.4: Adding to iommu group 16 <6>[ 7.484193] pci 0000:00:1f.5: Adding to iommu group 16 <6>[ 7.484268] pci 0000:00:1f.6: Adding to iommu group 16 <6>[ 7.484386] pci 0000:01:00.0: Adding to iommu group 17 <6>[ 7.508487] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 7.508502] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 7.508512] software IO TLB: mapped [mem 0x0000000056de6000-0x000000005ade6000] (64MB) <6>[ 7.512872] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 7.513125] clocksource: Switched to clocksource tsc <6>[ 7.513327] platform rtc_cmos: registered platform RTC device (no PNP device found) <5>[ 7.524004] Initialise system trusted keyrings <5>[ 7.524103] Key type blacklist registered <6>[ 7.524368] workingset: timestamp_bits=36 max_order=23 bucket_order=0 <6>[ 7.537376] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 7.537522] ntfs3: Enabled Linux POSIX ACLs support <6>[ 7.537530] ntfs3: Read-only LZX/Xpress compression included <5>[ 7.538997] integrity: Platform Keyring initialized <5>[ 7.539028] integrity: Machine keyring initialized <6>[ 7.547298] xor: automatically using best checksumming function avx <5>[ 7.547312] Key type asymmetric registered <5>[ 7.547327] Asymmetric key parser 'x509' registered <6>[ 7.547476] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) <6>[ 7.547862] io scheduler mq-deadline registered <6>[ 7.551519] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 7.554083] pcieport 0000:00:06.0: PME: Signaling with IRQ 122 <6>[ 7.556264] pcieport 0000:00:07.0: PME: Signaling with IRQ 123 <6>[ 7.558110] pcieport 0000:00:07.3: PME: Signaling with IRQ 124 <6>[ 7.560547] ACPI: AC: AC Adapter [ADP1] (on-line) <6>[ 7.560990] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 7.561398] ACPI: button: Lid Switch [LID0] <6>[ 7.561781] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 7.562020] ACPI: button: Sleep Button [SLPB] <6>[ 7.562331] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 7.562569] ACPI: button: Power Button [PWRB] <7>[ 7.573601] Monitor-Mwait will be used to enter C-1 state <7>[ 7.573649] Monitor-Mwait will be used to enter C-2 state <7>[ 7.573657] Monitor-Mwait will be used to enter C-3 state <6>[ 7.690273] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 7.690288] ACPI: thermal: Thermal Zone [TZ00] (42 C) <6>[ 7.691933] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled <6>[ 7.692016] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 7.693815] ACPI: battery: Slot [BAT0] (battery present) <6>[ 7.714996] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 7.734207] serial 0000:00:12.0: enabling device (0000 -> 0002) <6>[ 7.736758] serial 0000:00:16.3: enabling device (0001 -> 0003) <6>[ 7.759969] 0000:00:16.3: ttyS4 at I/O 0x3020 (irq = 19, base_baud = 115200) is a 16550A <5>[ 7.762169] hpet_acpi_add: no address or irqs in _CRS <6>[ 7.762302] Linux agpgart interface v0.103 <6>[ 7.790582] ACPI: bus type drm_connector registered <7>[ 7.792197] initcall simpledrm_platform_driver_init blacklisted <6>[ 7.823101] loop: module loaded <6>[ 7.875564] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 7.999040] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 8.088348] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 8.192041] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <6>[ 8.312867] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002) <6>[ 8.420341] intel-lpss 0000:00:19.1: enabling device (0000 -> 0002) <5>[ 8.514915] Key type psk registered <6>[ 8.517727] nvme 0000:01:00.0: platform quirk: setting simple suspend <6>[ 8.518678] nvme nvme0: pci function 0000:01:00.0 <6>[ 8.519136] tun: Universal TUN/TAP device driver, 1.6 <6>[ 8.520502] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 8.520643] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 8.522722] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 8.524920] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 8.524948] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 8.524979] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 8.525450] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 <6>[ 8.525481] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 8.525494] usb usb1: Product: xHCI Host Controller <6>[ 8.525503] usb usb1: Manufacturer: Linux 6.18.0-rc7-Patchwork_158055v1-gcc835cfc1699+ xhci-hcd <6>[ 8.525517] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 8.526864] hub 1-0:1.0: USB hub found <6>[ 8.526991] hub 1-0:1.0: 1 port detected <6>[ 8.531336] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18 <6>[ 8.531354] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 8.531367] usb usb2: Product: xHCI Host Controller <6>[ 8.531376] usb usb2: Manufacturer: Linux 6.18.0-rc7-Patchwork_158055v1-gcc835cfc1699+ xhci-hcd <6>[ 8.531390] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 8.532304] hub 2-0:1.0: USB hub found <6>[ 8.532374] hub 2-0:1.0: 4 ports detected <6>[ 8.565677] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 8.565714] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 8.567634] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 8.570496] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 8.570522] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 8.570544] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 8.570763] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 <6>[ 8.570779] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 8.570791] usb usb3: Product: xHCI Host Controller <6>[ 8.570800] usb usb3: Manufacturer: Linux 6.18.0-rc7-Patchwork_158055v1-gcc835cfc1699+ xhci-hcd <6>[ 8.570814] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 8.571677] hub 3-0:1.0: USB hub found <6>[ 8.571731] hub 3-0:1.0: 12 ports detected <6>[ 8.614133] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18 <6>[ 8.614152] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 8.614165] usb usb4: Product: xHCI Host Controller <6>[ 8.614174] usb usb4: Manufacturer: Linux 6.18.0-rc7-Patchwork_158055v1-gcc835cfc1699+ xhci-hcd <6>[ 8.614188] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 8.615019] hub 4-0:1.0: USB hub found <6>[ 8.615079] hub 4-0:1.0: 2 ports detected <6>[ 8.619515] nvme nvme0: allocated 64 MiB host memory buffer (1 segment). <6>[ 8.621794] usbcore: registered new interface driver usb-storage <6>[ 8.622015] usbcore: registered new interface driver usbserial_generic <6>[ 8.622122] usbserial: USB Serial support registered for generic <6>[ 8.622211] usbcore: registered new interface driver ftdi_sio <6>[ 8.622256] usbserial: USB Serial support registered for FTDI USB Serial Device <6>[ 8.622344] usbcore: registered new interface driver pl2303 <6>[ 8.622394] usbserial: USB Serial support registered for pl2303 <6>[ 8.622550] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 8.622562] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <6>[ 8.708011] nvme nvme0: 16/0/0 default/read/poll queues <6>[ 8.724022] nvme0n1: p1 p2 <3>[ 9.323887] i8042: Can't read CTR while initializing i8042 <3>[ 9.323900] i8042 i8042: probe with driver i8042 failed with error -5 <6>[ 9.325785] mousedev: PS/2 mouse device common for all mice <6>[ 9.327001] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 9.329172] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 9.329363] rtc_cmos rtc_cmos: setting system clock to 2025-11-26T07:09:12 UTC (1764140952) <6>[ 9.329564] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 9.329609] i2c_dev: i2c /dev entries driver <6>[ 9.333973] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 9.333983] softdog: soft_reboot_cmd= soft_active_on_boot=0 <4>[ 9.333990] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. <6>[ 9.334035] device-mapper: uevent: version 1.0.3 <6>[ 9.334432] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev <6>[ 9.334447] intel_pstate: Intel P-state driver initializing <6>[ 9.345826] intel_pstate: HWP enabled <6>[ 9.345838] sdhci: Secure Digital Host Controller Interface driver <6>[ 9.345847] sdhci: Copyright(c) Pierre Ossman <6>[ 9.346040] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 9.350489] drop_monitor: Initializing network drop monitor service <6>[ 9.350789] NET: Registered PF_INET6 protocol family <6>[ 9.352159] Segment Routing with IPv6 <6>[ 9.352197] In-situ OAM (IOAM) with IPv6 <6>[ 9.352242] NET: Registered PF_PACKET protocol family <5>[ 9.352393] Key type dns_resolver registered <4>[ 9.366441] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 9.368316] microcode: Current revision: 0x0000001c <6>[ 9.370280] IPI shorthand broadcast: enabled <6>[ 9.385157] sched_clock: Marking stable (9376001454, 9048104)->(9475340437, -90290879) <6>[ 9.386645] registered taskstats version 1 <5>[ 9.391177] Loading compiled-in X.509 certificates <6>[ 9.439566] Demotion targets for Node 0: null <6>[ 9.439974] kmemleak: Kernel memory leak detector initialized (mem pool available: 14930) <6>[ 9.439985] kmemleak: Automatic memory scanning thread started <5>[ 9.440302] Key type .fscrypt registered <5>[ 9.440307] Key type fscrypt-provisioning registered <6>[ 9.443514] Btrfs loaded, zoned=yes, fsverity=yes <5>[ 9.443618] Key type trusted registered <5>[ 9.448866] Key type encrypted registered <6>[ 9.448872] AppArmor: AppArmor sha256 policy hashing enabled <5>[ 9.449011] Loading compiled-in module X.509 certificates <5>[ 9.449673] Loaded X.509 cert 'Build time autogenerated kernel key: a4b7cfea6e114836a56443b51f4080bc474872e2' <6>[ 9.449684] ima: Allocated hash algorithm: sha256 <6>[ 9.490394] ima: No architecture policies found <6>[ 9.490537] evm: Initialising EVM extended attributes: <6>[ 9.490544] evm: security.selinux <6>[ 9.490549] evm: security.SMACK64 <6>[ 9.490553] evm: security.SMACK64EXEC <6>[ 9.490558] evm: security.SMACK64TRANSMUTE <6>[ 9.490563] evm: security.SMACK64MMAP <6>[ 9.490568] evm: security.apparmor <6>[ 9.490572] evm: security.ima <6>[ 9.490576] evm: security.capability <6>[ 9.490581] evm: HMAC attrs: 0x1 <6>[ 9.493302] PM: Magic number: 1:343:168 <6>[ 9.493442] acpi device:31: hash matches <6>[ 9.493571] netconsole: network logging started <6>[ 9.494320] RAS: Correctable Errors collector initialized. <6>[ 9.494519] clk: Disabling unused clocks <6>[ 9.494531] PM: genpd: Disabling unused power domains <4>[ 9.495342] check access for rdinit=/init failed: -2, ignoring <6>[ 9.495349] md: Waiting for all devices to be available before autodetect <6>[ 9.495354] md: If you don't use raid, use raid=noautodetect <6>[ 9.495358] md: Autodetecting RAID arrays. <6>[ 9.495918] md: autorun ... <6>[ 9.495921] md: ... autorun DONE. <6>[ 9.544364] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd <6>[ 9.558172] usb 4-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 <6>[ 9.558203] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 <6>[ 9.558216] usb 4-1: Product: USB 10/100/1000 LAN <6>[ 9.558225] usb 4-1: Manufacturer: Realtek <6>[ 9.558233] usb 4-1: SerialNumber: 000001 <6>[ 9.573850] EXT4-fs (nvme0n1p2): mounted filesystem 50f9c5b5-0801-45a5-b2f8-ae8d17396a16 ro with ordered data mode. Quota mode: none. <6>[ 9.573920] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 9.574807] devtmpfs: mounted <6>[ 9.591402] Freeing unused decrypted memory: 2036K <6>[ 9.592667] Freeing unused kernel image (initmem) memory: 5704K <6>[ 9.592695] Write protecting the kernel read-only data: 36864k <6>[ 9.594071] Freeing unused kernel image (text/rodata gap) memory: 1216K <6>[ 9.594805] Freeing unused kernel image (rodata/data gap) memory: 728K <6>[ 9.600736] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 9.600763] Run /sbin/init as init process <7>[ 9.600767] with arguments: <7>[ 9.600768] /sbin/init <7>[ 9.600769] with environment: <7>[ 9.600770] HOME=/ <7>[ 9.600770] TERM=linux <7>[ 9.679340] systemd[1]: Inserted module 'autofs4' <7>[ 9.723570] systemd[1]: systemd 255.4-1ubuntu8.8 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <7>[ 9.723599] systemd[1]: Detected architecture x86-64. <7>[ 9.725709] systemd[1]: Hostname set to . <7>[ 10.002997] systemd[1]: Queued start job for default target graphical.target. <7>[ 10.046550] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. <7>[ 10.048613] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. <7>[ 10.050321] systemd[1]: Created slice user.slice - User and Session Slice. <7>[ 10.050582] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. <7>[ 10.051300] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. <7>[ 10.051431] systemd[1]: Expecting device dev-disk-by\x2duuid-BC00\x2dEEBB.device - /dev/disk/by-uuid/BC00-EEBB... <7>[ 10.051522] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. <7>[ 10.051610] systemd[1]: Reached target slices.target - Slice Units. <7>[ 10.051684] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. <7>[ 10.051758] systemd[1]: Reached target snapd.mounts.target - Mounted snaps. <7>[ 10.051835] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. <7>[ 10.052107] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. <7>[ 10.052521] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. <7>[ 10.052846] systemd[1]: Listening on multipathd.socket - multipathd control socket. <7>[ 10.053225] systemd[1]: Listening on syslog.socket - Syslog Socket. <7>[ 10.053529] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. <7>[ 10.053770] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. <7>[ 10.054114] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). <7>[ 10.054497] systemd[1]: Listening on systemd-journald.socket - Journal Socket. <7>[ 10.054816] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. <7>[ 10.055032] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 10.055616] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. <7>[ 10.055928] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. <7>[ 10.060245] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... <7>[ 10.065932] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... <7>[ 10.068523] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... <7>[ 10.071251] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... <7>[ 10.079117] systemd[1]: Starting systemd-journald.service - Journal Service... <7>[ 10.082186] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... <7>[ 10.085383] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... <7>[ 10.088934] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... <7>[ 10.092149] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... <7>[ 10.097005] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... <7>[ 10.099259] systemd-journald[309]: Collecting audit messages is disabled. <7>[ 10.099967] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... <7>[ 10.104505] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... <7>[ 10.107574] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... <7>[ 10.111055] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... <7>[ 10.115284] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics... <7>[ 10.115449] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). <7>[ 10.119866] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... <7>[ 10.124274] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... <7>[ 10.124475] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 10.124570] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <6>[ 10.125133] pstore: Using crash dump compression: deflate <6>[ 10.127435] pstore: Registered efi_pstore as persistent store backend <7>[ 10.128903] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... <6>[ 10.130205] fuse: init (API version 7.45) <7>[ 10.135139] systemd[1]: Started systemd-journald.service - Journal Service. <6>[ 10.267308] EXT4-fs (nvme0n1p2): re-mounted 50f9c5b5-0801-45a5-b2f8-ae8d17396a16 r/w. <6>[ 10.297160] Adding 8388604k swap on /swap.img. Priority:-2 extents:66 across:952238080k SS <7>[ 10.313559] systemd-journald[309]: Received client request to flush runtime journal. <7>[ 10.335676] systemd-journald[309]: /var/log/journal/09bbc4ccef2141a7b5ecf81299acfffb/system.journal: Journal file uses a different sequence number ID, rotating. <7>[ 10.335689] systemd-journald[309]: Rotating system journal. <6>[ 11.245904] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002) <4>[ 11.250448] nvme nvme0: using unchecked data buffer <6>[ 11.265873] intel_pmc_ssram_telemetry 0000:00:14.2: enabling device (0000 -> 0002) <6>[ 11.287760] input: Intel HID events as /devices/platform/INTC1077:00/input/input3 <6>[ 11.301071] intel-hid INTC1077:00: platform supports 5 button array <6>[ 11.324729] input: Intel HID 5 button array as /devices/platform/INTC1077:00/input/input4 <3>[ 11.426038] int3472-tps68470 i2c-INT3472:0d: TPS68470 init error -121 <3>[ 11.426222] int3472-tps68470 i2c-INT3472:0d: probe with driver int3472-tps68470 failed with error -121 <6>[ 11.551172] ACPI: bus type thunderbolt registered <4>[ 11.568834] resource: resource sanity check: requesting [mem 0x00000000fedc0000-0x00000000fedcffff], which spans more than pnp 00:04 [mem 0xfedc0000-0xfedc7fff] <4>[ 11.568850] caller igen6_probe+0x190/0x9e0 [igen6_edac] mapping multiple BARs <6>[ 11.570668] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002) <6>[ 11.582895] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 11.582898] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 11.583013] EDAC MC0: Giving out device to module igen6_edac controller Intel_client_SoC MC#0: DEV 0000:00:00.0 (INTERRUPT) <6>[ 11.583274] idma64 idma64.0: Found Intel integrated DMA 64-bit <6>[ 11.587834] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_37xx_v0.0.bin, version: 20230726*MTL_CLIENT_SILICON-release*2101*ci_tag_mtl_pv_vpu_rc_20230726_2101*648a666b8b9 <6>[ 11.587841] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS <6>[ 11.588010] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode <6>[ 11.589705] i801_smbus 0000:00:1f.4: SPD Write Disable is set <6>[ 11.589829] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt <6>[ 11.590352] idma64 idma64.1: Found Intel integrated DMA 64-bit <6>[ 11.616126] EDAC MC1: Giving out device to module igen6_edac controller Intel_client_SoC MC#1: DEV 0000:00:00.0 (INTERRUPT) <6>[ 11.616982] EDAC igen6: v2.5.1 <6>[ 11.642320] idma64 idma64.2: Found Intel integrated DMA 64-bit <6>[ 11.659568] idma64 idma64.3: Found Intel integrated DMA 64-bit <6>[ 11.676918] usbcore: registered new device driver r8152-cfgselector <6>[ 11.733848] i2c i2c-6: Successfully instantiated SPD at 0x54 <6>[ 11.734683] i2c i2c-6: Successfully instantiated SPD at 0x56 <6>[ 11.763733] pci 0000:00:08.0: Setting to D3hot <6>[ 11.767084] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 11.767089] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 11.767091] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 11.767092] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules <6>[ 11.767093] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 11.775104] pci 0000:00:05.0: Setting to D3hot <6>[ 11.787759] intel_pmc_core INT33A1:00: initialized <6>[ 11.797548] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock <6>[ 11.810860] r8152-cfgselector 4-1: reset SuperSpeed USB device number 2 using xhci_hcd <6>[ 11.845306] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0 <5>[ 11.909248] audit: type=1400 audit(1764140955.074:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=593 comm="apparmor_parser" <5>[ 11.909261] audit: type=1400 audit(1764140955.075:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=594 comm="apparmor_parser" <6>[ 11.911061] proc_thermal_pci 0000:00:04.0: enabling device (0000 -> 0002) <5>[ 11.916672] audit: type=1400 audit(1764140955.085:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=592 comm="apparmor_parser" <5>[ 11.917124] audit: type=1400 audit(1764140955.086:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=595 comm="apparmor_parser" <5>[ 11.919850] audit: type=1400 audit(1764140955.088:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=596 comm="apparmor_parser" <5>[ 11.922544] audit: type=1400 audit(1764140955.091:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=597 comm="apparmor_parser" <5>[ 11.924386] audit: type=1400 audit(1764140955.093:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=598 comm="apparmor_parser" <5>[ 11.926858] audit: type=1400 audit(1764140955.095:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=599 comm="apparmor_parser" <5>[ 11.928339] audit: type=1400 audit(1764140955.097:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=600 comm="apparmor_parser" <6>[ 11.930440] intel_rapl_common: Found RAPL domain package <5>[ 11.931684] audit: type=1400 audit(1764140955.100:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=601 comm="apparmor_parser" <6>[ 11.942846] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88 <6>[ 11.942853] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection <6>[ 11.942980] e1000e 0000:00:1f.6 eth0: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF <6>[ 11.957722] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 11.961670] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.022772] r8152 4-1:1.0 eth1: v1.12.13 <6>[ 12.023638] usbcore: registered new interface driver r8152 <6>[ 12.029914] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.054265] intel_rapl_msr: PL4 support detected. <6>[ 12.057726] intel_rapl_common: Found RAPL domain package <6>[ 12.057731] intel_rapl_common: Found RAPL domain core <6>[ 12.057734] intel_rapl_common: Found RAPL domain uncore <6>[ 12.057737] intel_rapl_common: Found RAPL domain psys <6>[ 12.086860] usbcore: registered new interface driver cdc_ether <6>[ 12.107988] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.128337] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.144365] usbcore: registered new interface driver r8153_ecm <6>[ 12.145294] e1000e 0000:00:1f.6 eno0: renamed from eth0 <6>[ 12.155833] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 12.170668] spi-nor spi0.0: supply vcc not found, using dummy regulator <5>[ 12.189667] Creating 1 MTD partitions on "0000:00:1f.5": <5>[ 12.189691] 0x000000000000-0x000002000000 : "BIOS" <6>[ 12.198883] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.205608] r8152 4-1:1.0 enxe2015072f451: renamed from eth1 <6>[ 12.245328] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.253942] hid: raw HID events driver (C) Jiri Kosina <6>[ 12.259271] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6 <6>[ 12.290029] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.295037] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.296558] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.296739] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.298300] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.299471] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.299820] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.301871] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 12.301979] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.302339] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 12.304790] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.307913] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.311196] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.311391] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.314333] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.315583] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.318794] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.319813] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.321844] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 12.323250] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.323589] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 12.326000] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.395904] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.401024] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.404325] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.407597] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.410887] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.413993] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.418397] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.423635] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.426676] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.430318] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.434614] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.437975] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.442012] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.445086] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.449668] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.454212] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.457639] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.461074] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.464849] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.469342] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.577747] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 12.589317] block nvme0n1: No UUID available providing old NGUID <6>[ 12.690621] /proc/cgroups lists only v1 controllers, use cgroup.controllers of root cgroup for v2 info <6>[ 12.931472] loop0: detected capacity change from 0 to 8 <6>[ 13.136859] Consider using thermal netlink events interface <6>[ 14.863843] r8152 4-1:1.0 enxe2015072f451: carrier on <3>[ 20.576705] ucsi_acpi USBC000:00: error -ETIMEDOUT: PPM init failed <6>[ 22.651823] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 22.653673] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component <7>[ 32.535875] systemd-journald[309]: /var/log/journal/09bbc4ccef2141a7b5ecf81299acfffb/user-1000.journal: Journal file uses a different sequence number ID, rotating. <7>[ 49.315698] [IGT] i915_module_load: executing <4>[ 49.315748] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <7>[ 49.347836] [IGT] i915_module_load: starting subtest load <4>[ 49.919329] ********************************************************** <4>[ 49.919330] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 49.919331] ** ** <4>[ 49.919331] ** trace_printk() being used. Allocating extra memory. ** <4>[ 49.919332] ** ** <4>[ 49.919333] ** This means that this is a DEBUG kernel and it is ** <4>[ 49.919334] ** unsafe for production use. ** <4>[ 49.919335] ** ** <4>[ 49.919335] ** If you see this message and you are not debugging ** <4>[ 49.919336] ** the kernel, report this immediately to your vendor! ** <4>[ 49.919337] ** ** <4>[ 49.919338] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 49.919338] ********************************************************** <5>[ 49.958725] Setting dangerous option force_probe - tainting kernel <6>[ 49.963614] i915 0000:00:02.0: [drm] Found meteorlake (device ID 7d55) integrated display version 14.00 stepping C0 <7>[ 49.964830] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K <7>[ 49.965114] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:no slpc:yes) <7>[ 49.965330] i915 0000:00:02.0: [drm:intel_pch_detect [i915]] PCH not involved in display, using fake PCH type 1026 for south display <7>[ 49.965510] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7>[ 49.965726] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7>[ 49.965908] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT1: Setting up Standalone Media GT <7>[ 49.966109] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K <7>[ 49.966396] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT1: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes) <7>[ 49.966731] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7>[ 49.966943] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 38400 kHz <7>[ 49.967476] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vdbox enable: 0000, instances: 0000 <7>[ 49.967632] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vebox enable: 0000, instances: 0000 <7>[ 49.968099] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vdbox enable: 0005, instances: 0005 <7>[ 49.968240] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vebox enable: 0001, instances: 0001 <7>[ 49.968756] i915 0000:00:02.0: [drm:ggtt_probe_common [i915]] Using direct GSM access <7>[ 49.969063] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7>[ 49.969222] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 0M <7>[ 49.969387] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M <6>[ 49.969523] i915 0000:00:02.0: [drm] VT-d active for gfx access <6>[ 49.969854] i915 0000:00:02.0: vgaarb: deactivate vga console <6>[ 49.970199] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7>[ 49.970208] i915 0000:00:02.0: [drm:i915_gem_stolen_lmem_setup [i915]] Using direct DSM access <7>[ 49.970410] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000078400947 <7>[ 49.970954] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 131072K, usable: 126976K <7>[ 49.971208] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 31513 MiB [mem 0x00000000-0x7b199dfff], io: n/a <7>[ 49.971351] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(6): stolen-local: 124 MiB [mem 0x00800000-0x083fffff], io: 124 MiB [mem 0x70800000-0x783fffff] <7>[ 49.971824] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x63e04018 <7>[ 49.972048] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 3.0.0 <7>[ 49.972211] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7>[ 49.972366] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7>[ 49.972551] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7>[ 49.972699] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Mailbox #2 for backlight present <7>[ 49.972868] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 49.973021] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR5 <7>[ 49.973187] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 8 <7>[ 49.973349] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 4 <7>[ 49.973519] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7>[ 49.973683] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=3200 tRP=64 tRDPRE=40 tRAS=136 tRCD=64 tRC=200 <7>[ 49.973859] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=6000 tRP=112 tRDPRE=80 tRAS=0 tRCD=112 tRC=112 <7>[ 49.974032] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=16 tRCD=120 tRC=136 <7>[ 49.974203] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 3: DCLK=5600 tRP=104 tRDPRE=80 tRAS=240 tRCD=104 tRC=344 <7>[ 49.974389] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 0: num_planes=0 deratedbw=28913 peakbw: 51200 <7>[ 49.974617] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 49.974780] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 49.974934] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 49.975087] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 0: num_planes=0 deratedbw=35532 peakbw: 51200 <7>[ 49.975237] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 49.975391] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 49.975546] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 49.975729] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 49.975888] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 49.976046] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 49.976202] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 49.976356] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 49.976511] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 49.976690] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 49.976892] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 49.977084] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 49.977242] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 49.977395] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 49.977546] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 49.977735] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 49.977888] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 49.978040] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 49.978193] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 49.978915] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7>[ 49.979079] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT METEORLAKE ", BDB version 253 <7>[ 49.979236] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7) <7>[ 49.979409] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5) <7>[ 49.979627] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7>[ 49.979807] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7>[ 49.979970] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 848) <7>[ 49.980125] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34) <7>[ 49.980276] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7>[ 49.980443] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7>[ 49.980598] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366) <7>[ 49.980753] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305) <7>[ 49.980931] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 98, min size 136) <7>[ 49.981087] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7>[ 49.981248] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7>[ 49.981402] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 49.981554] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7>[ 49.981704] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7>[ 49.981970] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7>[ 49.982151] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 49.982311] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7>[ 49.982466] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 49.982617] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 49.982772] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7>[ 49.982950] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 49.983104] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 49.983257] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 49.983409] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 49.983561] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 49.983716] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 49.983881] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a <7>[ 49.984083] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 49.984301] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7>[ 49.984538] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 49.984831] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 49.985112] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7>[ 49.985301] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7>[ 49.985460] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 49.985619] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 49.985824] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <6>[ 49.985995] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem <7>[ 49.986024] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7>[ 49.986206] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B <7>[ 49.986371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C <7>[ 49.986533] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D <7>[ 49.987216] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/mtl_dmc.bin <7>[ 49.988055] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7>[ 49.989445] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us <7>[ 49.989629] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7>[ 49.989791] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 85 (85.0 usec) <7>[ 49.989946] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 86 (86.0 usec) <7>[ 49.990096] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 101 (101.0 usec) <7>[ 49.990274] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 102 (102.0 usec) <7>[ 49.990426] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 155 (155.0 usec) <7>[ 49.990577] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 6 (6.0 usec) <7>[ 49.990727] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 91 (91.0 usec) <7>[ 49.990876] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 92 (92.0 usec) <7>[ 49.991024] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 107 (107.0 usec) <7>[ 49.991175] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 108 (108.0 usec) <7>[ 49.991350] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 161 (161.0 usec) <7>[ 49.992591] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7>[ 49.992864] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x86fc0 <7>[ 49.993030] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7>[ 49.993192] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f004 = 0x42c0408 (EVT_HTP) <7>[ 49.993538] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL) <7>[ 49.993729] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x8f008 = 0x534052f4 (EVT_HTP) <7>[ 49.993933] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 1: <7>[ 49.994147] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f074 = 0x96fc0 <7>[ 49.994394] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling) <7>[ 49.994563] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f004 = 0x212c20f4 (EVT_HTP) <7>[ 49.994774] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling) <7>[ 49.994983] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f008 = 0x222021e8 (EVT_HTP) <7>[ 49.995166] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 49.995347] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f00c = 0x23f422dc (EVT_HTP) <7>[ 49.995534] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 49.995691] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f010 = 0x26ec26c0 (EVT_HTP) <7>[ 49.995867] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 2: <7>[ 49.996019] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f474 = 0x9efc0 <7>[ 49.996173] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling) <7>[ 49.996327] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f404 = 0xa618a5e0 (EVT_HTP) <7>[ 49.996508] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling) <7>[ 49.996666] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f408 = 0xa70ca6d4 (EVT_HTP) <7>[ 49.996820] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 49.996973] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f40c = 0xa8e0a7c8 (EVT_HTP) <7>[ 49.997126] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 49.997282] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f410 = 0xabd8abac (EVT_HTP) <7>[ 49.997443] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 3: <7>[ 49.997624] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f874 = 0x53fc0 <7>[ 49.997638] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 4 display pipes available. <7>[ 49.997787] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 49.997954] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f80c = 0x24a02388 (EVT_HTP) <7>[ 49.998116] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 49.998268] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f810 = 0x2798276c (EVT_HTP) <7>[ 49.998429] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 4: <7>[ 49.998602] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5fc74 = 0x5afc0 <7>[ 49.998758] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 49.998921] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5fc0c = 0x94a09388 (EVT_HTP) <7>[ 49.999079] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5fc40 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 49.999245] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5fc10 = 0x9798976c (EVT_HTP) <7>[ 50.003304] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 50.003517] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz <7>[ 50.003706] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 1305600 kHz <7>[ 50.005107] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:261:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 50.007160] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:261:DDI A/PHY A] <7>[ 50.007398] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7>[ 50.007576] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7>[ 50.007743] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7>[ 50.007931] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 50.008091] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <6>[ 50.008196] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/mtl_dmc.bin (v2.23) <7>[ 50.008262] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7>[ 50.008432] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7>[ 50.008596] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7>[ 50.008750] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 50.008939] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:261:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 50.009178] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 50.009353] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 50.009515] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 50.009660] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 50.009805] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 50.010087] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 50.010410] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 50.011934] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:261:DDI A/PHY A] PPS 0 turning VDD on <7>[ 50.012328] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:261:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 50.013736] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 00 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 50.014190] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7>[ 50.014800] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 04 83 85 04 00 <7>[ 50.015574] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 3 <7>[ 50.016081] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] PSR2 supported <7>[ 50.017694] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 50.024329] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:262:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 50.024340] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:262:eDP-1] ELD monitor <7>[ 50.024345] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:262:eDP-1] ELD size 20, SAD count 0 <7>[ 50.024394] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:262:eDP-1] using preferred EDID fixed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 50.024877] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:262:eDP-1] Performing OUI wait (0 ms) <7>[ 50.025353] i915 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [i915]] [CONNECTOR:262:eDP-1] Detected unsupported HDR backlight interface version 0 <7>[ 50.025536] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:262:eDP-1] DRRS type: none <7>[ 50.025791] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:262:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 50.026005] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:262:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 50.026235] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 50.026388] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 50.026537] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 50.026691] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 50.026840] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 50.027132] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 50.027413] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:270:DDI B/PHY B] Using AUX CH B (VBT) <7>[ 50.027584] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:270:DDI B/PHY B] <7>[ 50.028038] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:270:DDI B/PHY B] <7>[ 50.028203] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:270:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7>[ 50.028550] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:288:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 50.028840] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 50.029143] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:288:DDI TC1/PHY TC1] <7>[ 50.029485] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:297:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 50.029721] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected) <7>[ 50.030095] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7>[ 50.030293] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:297:DDI TC2/PHY TC2] <7>[ 50.030460] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:297:DDI TC2/PHY TC2] Using DDC pin 0xa (VBT) <7>[ 50.030695] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:301:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 50.030950] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port F/TC#3: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 50.031222] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:301:DDI TC3/PHY TC3] <7>[ 50.031548] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:310:DDI TC4/PHY TC4] Using AUX CH USBC4 (VBT) <7>[ 50.031782] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port G/TC#4: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 50.032033] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:310:DDI TC4/PHY TC4] <7>[ 50.032920] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:88:pipe A] hw state readout: enabled <7>[ 50.033281] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:145:pipe B] hw state readout: disabled <7>[ 50.033637] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:202:pipe C] hw state readout: disabled <7>[ 50.033967] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:259:pipe D] hw state readout: disabled <7>[ 50.034140] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: enabled, pipe A <7>[ 50.034319] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A <7>[ 50.034497] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:53:plane 3A] hw state readout: disabled, pipe A <7>[ 50.034659] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:63:plane 4A] hw state readout: disabled, pipe A <7>[ 50.034818] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 5A] hw state readout: disabled, pipe A <7>[ 50.034978] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:cursor A] hw state readout: disabled, pipe A <7>[ 50.035176] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:90:plane 1B] hw state readout: disabled, pipe B <7>[ 50.035371] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 2B] hw state readout: disabled, pipe B <7>[ 50.035563] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:110:plane 3B] hw state readout: disabled, pipe B <7>[ 50.035728] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:120:plane 4B] hw state readout: disabled, pipe B <7>[ 50.035885] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:130:plane 5B] hw state readout: disabled, pipe B <7>[ 50.036053] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:140:cursor B] hw state readout: disabled, pipe B <7>[ 50.036225] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:147:plane 1C] hw state readout: disabled, pipe C <7>[ 50.036416] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:157:plane 2C] hw state readout: disabled, pipe C <7>[ 50.036606] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:167:plane 3C] hw state readout: disabled, pipe C <7>[ 50.036770] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:177:plane 4C] hw state readout: disabled, pipe C <7>[ 50.036927] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:187:plane 5C] hw state readout: disabled, pipe C <7>[ 50.037114] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:197:cursor C] hw state readout: disabled, pipe C <7>[ 50.037282] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:204:plane 1D] hw state readout: disabled, pipe D <7>[ 50.037462] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:214:plane 2D] hw state readout: disabled, pipe D <7>[ 50.037627] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:224:plane 3D] hw state readout: disabled, pipe D <7>[ 50.037783] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:234:plane 4D] hw state readout: disabled, pipe D <7>[ 50.037942] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:244:plane 5D] hw state readout: disabled, pipe D <7>[ 50.038104] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:254:cursor D] hw state readout: disabled, pipe D <7>[ 50.039035] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 50.039252] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:261:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 50.039421] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:270:DDI B/PHY B] hw state readout: disabled, pipe A <7>[ 50.039577] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:272:DP-MST A] hw state readout: disabled, pipe A <7>[ 50.039728] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:273:DP-MST B] hw state readout: disabled, pipe B <7>[ 50.039877] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:274:DP-MST C] hw state readout: disabled, pipe C <7>[ 50.040026] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:275:DP-MST D] hw state readout: disabled, pipe D <7>[ 50.040233] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 50.040404] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:288:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 50.040579] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:290:DP-MST A] hw state readout: disabled, pipe A <7>[ 50.040735] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:291:DP-MST B] hw state readout: disabled, pipe B <7>[ 50.040881] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:292:DP-MST C] hw state readout: disabled, pipe C <7>[ 50.041027] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:293:DP-MST D] hw state readout: disabled, pipe D <7>[ 50.041216] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 50.041382] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:297:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 50.041575] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 50.041751] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:301:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 50.041913] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:303:DP-MST A] hw state readout: disabled, pipe A <7>[ 50.042061] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:304:DP-MST B] hw state readout: disabled, pipe B <7>[ 50.042207] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:305:DP-MST C] hw state readout: disabled, pipe C <7>[ 50.042361] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:306:DP-MST D] hw state readout: disabled, pipe D <7>[ 50.042539] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port G/TC#4: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 50.042713] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:310:DDI TC4/PHY TC4] hw state readout: disabled, pipe A <7>[ 50.042882] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:312:DP-MST A] hw state readout: disabled, pipe A <7>[ 50.043028] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:313:DP-MST B] hw state readout: disabled, pipe B <7>[ 50.043173] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:314:DP-MST C] hw state readout: disabled, pipe C <7>[ 50.043320] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:315:DP-MST D] hw state readout: disabled, pipe D <7>[ 50.044131] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:88:pipe A] reserving DPLL 0 <7>[ 50.044295] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x1, on 1 <7>[ 50.044487] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 50.044668] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7>[ 50.044849] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 50.045013] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7>[ 50.045176] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7>[ 50.045339] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7>[ 50.045618] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:262:eDP-1] hw state readout: enabled <7>[ 50.045821] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:271:DP-1] hw state readout: disabled <7>[ 50.046002] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:283:HDMI-A-1] hw state readout: disabled <7>[ 50.046172] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:289:DP-2] hw state readout: disabled <7>[ 50.046342] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:298:HDMI-A-2] hw state readout: disabled <7>[ 50.046525] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:302:DP-3] hw state readout: disabled <7>[ 50.046695] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:311:DP-4] hw state readout: disabled <7>[ 50.046915] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 256910 kHz <7>[ 50.047074] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] min_cdclk 0 kHz <7>[ 50.047231] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:53:plane 3A] min_cdclk 0 kHz <7>[ 50.047383] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:63:plane 4A] min_cdclk 0 kHz <7>[ 50.047545] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 5A] min_cdclk 0 kHz <7>[ 50.047700] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:cursor A] min_cdclk 0 kHz <7>[ 50.047856] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:88:pipe A] min_cdclk 256910 kHz <7>[ 50.048009] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:90:plane 1B] min_cdclk 0 kHz <7>[ 50.048160] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 2B] min_cdclk 0 kHz <7>[ 50.048306] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:110:plane 3B] min_cdclk 0 kHz <7>[ 50.048451] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:120:plane 4B] min_cdclk 0 kHz <7>[ 50.048606] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:130:plane 5B] min_cdclk 0 kHz <7>[ 50.048754] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:140:cursor B] min_cdclk 0 kHz <7>[ 50.048902] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:145:pipe B] min_cdclk 0 kHz <7>[ 50.049051] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:147:plane 1C] min_cdclk 0 kHz <7>[ 50.049195] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:157:plane 2C] min_cdclk 0 kHz <7>[ 50.049341] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:167:plane 3C] min_cdclk 0 kHz <7>[ 50.049488] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:177:plane 4C] min_cdclk 0 kHz <7>[ 50.049640] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:187:plane 5C] min_cdclk 0 kHz <7>[ 50.049789] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:197:cursor C] min_cdclk 0 kHz <7>[ 50.049936] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:202:pipe C] min_cdclk 0 kHz <7>[ 50.050082] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:204:plane 1D] min_cdclk 0 kHz <7>[ 50.050226] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:214:plane 2D] min_cdclk 0 kHz <7>[ 50.050370] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:224:plane 3D] min_cdclk 0 kHz <7>[ 50.050515] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:234:plane 4D] min_cdclk 0 kHz <7>[ 50.050665] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:244:plane 5D] min_cdclk 0 kHz <7>[ 50.050815] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:254:cursor D] min_cdclk 0 kHz <7>[ 50.050962] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:259:pipe D] min_cdclk 0 kHz <7>[ 50.051312] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:88:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 50.051471] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:145:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 50.051631] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:202:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 50.051799] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:259:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 50.051953] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe A data rate 2055280 num active planes 1 <7>[ 50.052123] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe B data rate 0 num active planes 0 <7>[ 50.052288] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe C data rate 0 num active planes 0 <7>[ 50.052449] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe D data rate 0 num active planes 0 <7>[ 50.052685] i915 0000:00:02.0: [drm:intel_cmtg_sanitize [i915]] CMTG readout: CMTG A: enabled, CMTG B: n/a, Transcoder A secondary: yes, Transcoder B secondary: no <7>[ 50.053311] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:88:pipe A] enable: yes [setup_hw_state] <7>[ 50.053477] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 50.053636] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 50.053801] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 50.053956] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 50.054111] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7>[ 50.054264] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 50.054417] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 623587, link_n: 524288, tu: 64 <7>[ 50.054569] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 50.054722] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7>[ 50.054885] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7>[ 50.055039] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7>[ 50.055192] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7>[ 50.055343] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 50.055495] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7>[ 50.055647] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7>[ 50.055801] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7>[ 50.055967] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7>[ 50.056118] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 50.056271] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 50.056425] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 50.056576] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 50.056726] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 50.056883] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 513820, min cdclk 256910 <7>[ 50.057037] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 50.057191] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 50.057343] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 50.057494] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 50.057645] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 50.057798] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: clock: 432000, fracen: no, <7>[ 50.057954] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 225, tx_clk_div: 1. <7>[ 50.058104] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state: <7>[ 50.058256] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21 <7>[ 50.058408] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 50.058561] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 50.058712] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 50.058862] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 50.059021] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 50.059177] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 50.059332] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 50.059486] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 50.059636] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.059786] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.059939] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.060102] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 50.060266] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 50.060431] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.060584] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.060734] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.060885] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 50.061036] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 50.061213] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:145:pipe B] enable: no [setup_hw_state] <7>[ 50.061381] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:202:pipe C] enable: no [setup_hw_state] <7>[ 50.061536] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:259:pipe D] enable: no [setup_hw_state] <7>[ 50.061691] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] TBT PLL enabled but not in use, disabling <7>[ 50.062067] i915 0000:00:02.0: [drm:skl_get_initial_plane_config [i915]] [CRTC:88:pipe A][PLANE:33:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800 <7>[ 50.062244] i915 0000:00:02.0: [drm:intel_initial_plane_config [i915]] Using dma_addr=0x0000000000800000, based on initial plane programming <7>[ 50.062416] i915 0000:00:02.0: [drm:_i915_gem_object_stolen_init [i915]] creating preallocated stolen object: stolen_offset=0x0000000000000000, size=0x00000000013c7000 <7>[ 50.062925] i915 0000:00:02.0: [drm:intel_initial_plane_config [i915]] Initial plane fb bound to 0x0 in the ggtt (original 0xfec00000) <7>[ 50.071972] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [2048K, 832K) <7>[ 50.077859] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [1040K, 832K) <7>[ 50.078024] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [13c7000, fee00000] <7>[ 50.078176] i915 0000:00:02.0: [drm:nop_init_clock_gating [i915]] No clock gating settings or workarounds applied. <7>[ 50.078327] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: L3BANK steering: group=0x0, instance=0x0 <7>[ 50.078481] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: DSS steering: group=0x0, instance=0x0 <7>[ 50.078633] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: INSTANCE 0 steering: group=0x0, instance=0x0 <7>[ 50.078812] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7>[ 50.082029] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 7 engine workarounds on rcs'0 <7>[ 50.082332] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 whitelist workarounds on rcs'0 <7>[ 50.082583] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 7 context workarounds on rcs'0 <7>[ 50.083891] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 engine workarounds on bcs'0 <7>[ 50.084103] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 context workarounds on bcs'0 <7>[ 50.084581] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 engine workarounds on ccs'0 <7>[ 50.084742] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 context workarounds on ccs'0 <7>[ 50.085851] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 50.086046] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 24 ext-regs. <7>[ 50.086279] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7>[ 50.107287] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0x13c804f <7>[ 50.107491] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x410800 <7>[ 50.107650] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4 <7>[ 50.107807] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7>[ 50.107979] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x2f92 <7>[ 50.108138] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x7d550008 <7>[ 50.108294] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7>[ 50.108447] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7>[ 50.108599] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7>[ 50.108750] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7>[ 50.108901] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7>[ 50.109065] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7>[ 50.109218] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7>[ 50.109366] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <6>[ 50.110401] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/mtl_guc_70.bin version 70.53.0 <7>[ 50.120561] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 8ms, freq = 1750MHz -> 2000MHz vs 2200MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 50.122106] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6>[ 50.124214] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6>[ 50.124219] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <6>[ 50.124838] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled <7>[ 50.125244] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT0: GUC: Querying HW config table: size = 0, offset = 0x00000000 <7>[ 50.125943] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT0: GUC: Querying HW config table: size = 752, offset = 0x01FFC000 <7>[ 50.132823] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: OADDRM steering: group=0x0, instance=0x0 <7>[ 50.133018] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 5 GT workarounds on global <7>[ 50.134408] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'0 <7>[ 50.134577] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'0 <7>[ 50.135494] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'2 <7>[ 50.135660] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'2 <7>[ 50.136282] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vecs'0 <7>[ 50.136440] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vecs'0 <7>[ 50.137046] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on other'6 <7>[ 50.137217] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on other'6 <7>[ 50.139062] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT1: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 50.139355] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT1: GUC: capture found 24 ext-regs. <7>[ 50.139548] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT1: GUC: Used 4 KB for temporary ADS regset <7>[ 50.162461] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 0] = 0x1ffd04f <7>[ 50.162638] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 1] = 0x400000 <7>[ 50.162802] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 2] = 0x4 <7>[ 50.162964] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 3] = 0x3 <7>[ 50.163130] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 4] = 0x47fc <7>[ 50.163324] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 5] = 0x7d550008 <7>[ 50.163479] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 6] = 0x0 <7>[ 50.163631] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 7] = 0x0 <7>[ 50.163785] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 8] = 0x0 <7>[ 50.163939] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 9] = 0x0 <7>[ 50.164090] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[10] = 0x0 <7>[ 50.164255] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[11] = 0x0 <7>[ 50.164409] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[12] = 0x0 <7>[ 50.164562] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[13] = 0x0 <7>[ 50.164715] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT1: HuC: loaded by GSC = no <7>[ 50.168849] i915 0000:00:02.0: [drm:i915_gsc_proxy_component_bind [i915]] GT1: GSC proxy mei component bound <6>[ 50.169507] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops i915_gsc_proxy_component_ops [i915]) <6>[ 50.170707] i915 0000:00:02.0: [drm] GT1: GuC firmware i915/mtl_guc_70.bin version 70.53.0 <6>[ 50.170715] i915 0000:00:02.0: [drm] GT1: HuC firmware i915/mtl_huc_gsc.bin version 8.5.4 <7>[ 50.185115] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT1: GUC: init took 12ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 50.185389] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled <7>[ 50.194511] i915 0000:00:02.0: [drm:intel_huc_wait_for_auth_complete [i915]] GT1: HuC: auth took 8ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x0000C1DC, count = 0, ret = 0 <6>[ 50.194674] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for clear media <6>[ 50.195544] i915 0000:00:02.0: [drm] GT1: GUC: submission enabled <6>[ 50.195546] i915 0000:00:02.0: [drm] GT1: GUC: SLPC enabled <6>[ 50.195746] i915 0000:00:02.0: [drm] GT1: GUC: RC enabled <7>[ 50.195966] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT1: GUC: Querying HW config table: size = 0, offset = 0x00000000 <7>[ 50.197166] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT1: GUC: Querying HW config table: size = 752, offset = 0xFEDA5000 <7>[ 50.203139] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7>[ 50.203295] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7>[ 50.203441] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7>[ 50.203584] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'2 to vcs1 <7>[ 50.203726] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7>[ 50.203899] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed ccs'0 to ccs0 <7>[ 50.204039] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed other'6 to other0 <6>[ 50.205566] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized <7>[ 50.206998] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:88:pipe A] FQ 0: start 0x90008 <7>[ 50.207176] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:88:pipe A] FQ 1: start 0x90108 <7>[ 50.207342] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:88:pipe A] FQ 2: start 0x90208 <7>[ 50.207503] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:88:pipe A] FQ 3: start 0x90308 <7>[ 50.207662] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:88:pipe A] FQ 4: start 0x903c8 <7>[ 50.207820] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:145:pipe B] FQ 0: start 0x98008 <7>[ 50.207979] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:145:pipe B] FQ 1: start 0x98108 <7>[ 50.208326] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:145:pipe B] FQ 2: start 0x98208 <7>[ 50.208481] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:145:pipe B] FQ 3: start 0x98308 <7>[ 50.208637] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:145:pipe B] FQ 4: start 0x983c8 <7>[ 50.208794] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:202:pipe C] FQ 0: start 0x52008 <7>[ 50.208952] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:202:pipe C] FQ 1: start 0x52108 <7>[ 50.209142] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:202:pipe C] FQ 2: start 0x52208 <7>[ 50.209294] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:202:pipe C] FQ 3: start 0x52308 <7>[ 50.209446] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:202:pipe C] FQ 4: start 0x523c8 <7>[ 50.209598] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:259:pipe D] FQ 0: start 0x59008 <7>[ 50.209750] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:259:pipe D] FQ 1: start 0x59108 <7>[ 50.209903] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:259:pipe D] FQ 2: start 0x59208 <7>[ 50.210058] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:259:pipe D] FQ 3: start 0x59308 <7>[ 50.210235] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:259:pipe D] FQ 4: start 0x593c8 <7>[ 50.210660] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 50.210828] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:88:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 50.210997] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 2048) -> ( 0 - 4001), size 2048 -> 4001 <7>[ 50.211169] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:83:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95 <7>[ 50.211329] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm <7>[ 50.211484] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 2, 2, 2, 2, 2, 2, 0, 0, 1, 3, 1 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 <7>[ 50.211638] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 49, 49, 49, 49, 49, 49, 0, 0, 7, 73, 7 -> 49, 385, 385, 457, 457, 673, 0, 0, 0, 73, 0 <7>[ 50.211790] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 0, 82, 0 <7>[ 50.211983] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:145:pipe B] enable: no [fastset] <7>[ 50.212159] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:202:pipe C] enable: no [fastset] <7>[ 50.212351] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:259:pipe D] enable: no [fastset] <7>[ 50.214105] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 42393600 bytes of contiguous stolen space for FBC, limit: 1 <7>[ 50.214292] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:33:plane 1A] <7>[ 50.214512] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: no -> yes (pipe: A) <7>[ 50.214686] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 4 (mbus joined: yes) <7>[ 50.225580] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:145:pipe B] <7>[ 50.226089] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:202:pipe C] <7>[ 50.226438] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:259:pipe D] <7>[ 50.230505] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:262:eDP-1] adding connector to sysfs <7>[ 50.232937] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:262:eDP-1] backlight device intel_backlight registered <7>[ 50.233161] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:262:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7>[ 50.233346] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:262:eDP-1] Panel prepare <7>[ 50.233746] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 50.235432] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:262:eDP-1] generating connector hotplug event <7>[ 50.235499] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:271:DP-1] adding connector to sysfs <7>[ 50.235963] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7>[ 50.237549] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:271:DP-1] generating connector hotplug event <7>[ 50.237590] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:283:HDMI-A-1] adding connector to sysfs <7>[ 50.237907] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:283:HDMI-A-1] generating connector hotplug event <7>[ 50.237939] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:289:DP-2] adding connector to sysfs <7>[ 50.238338] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2 <7>[ 50.239026] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:289:DP-2] generating connector hotplug event <7>[ 50.239060] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:298:HDMI-A-2] adding connector to sysfs <7>[ 50.239387] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:298:HDMI-A-2] generating connector hotplug event <7>[ 50.239421] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:302:DP-3] adding connector to sysfs <7>[ 50.239796] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 50.240434] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:302:DP-3] generating connector hotplug event <7>[ 50.240470] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:311:DP-4] adding connector to sysfs <7>[ 50.240819] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY TC4 bus for card0-DP-4 <7>[ 50.241514] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:311:DP-4] generating connector hotplug event <6>[ 50.241541] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7>[ 50.243881] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected <6>[ 50.255612] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 50.259044] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 <7>[ 50.260158] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 50.260388] i915 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [i915]] aud_ts_cdclk set to M=60, N=768 <7>[ 50.260924] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 50.260929] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7>[ 50.261732] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] found possible fb from [PLANE:33:plane 1A] <7>[ 50.261920] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:145:pipe B] not active, skipping <7>[ 50.262097] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:202:pipe C] not active, skipping <6>[ 50.262267] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7>[ 50.262287] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:259:pipe D] not active, skipping <7>[ 50.262450] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] checking [PLANE:33:plane 1A] for BIOS fb <7>[ 50.262606] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:88:pipe A] area: 2880x1800, bpp: 32, size: 20736000 <7>[ 50.262663] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 50.262778] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] fb big enough [PLANE:33:plane 1A] (20738048 >= 20736000) <7>[ 50.263000] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:145:pipe B] not active, skipping <7>[ 50.263228] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:202:pipe C] not active, skipping <7>[ 50.263469] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:259:pipe D] not active, skipping <7>[ 50.263663] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] using BIOS fb for initial console <7>[ 50.264005] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:271:DP-1] <7>[ 50.264110] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 50.265613] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 50.267678] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9a01 <7>[ 50.268170] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7>[ 50.268179] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7>[ 50.268514] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:271:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.268704] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:283:HDMI-A-1] <7>[ 50.273155] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:283:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.273332] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:289:DP-2] <7>[ 50.273843] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 50.274126] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:289:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.274309] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:298:HDMI-A-2] <7>[ 50.274662] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7>[ 50.279984] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:298:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.280182] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:302:DP-3] <7>[ 50.280476] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 50.280706] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:302:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.280873] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:311:DP-4] <7>[ 50.281151] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 50.281409] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:311:DP-4] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.281627] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 50.281746] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:eDP-1] <7>[ 50.281843] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:262:eDP-1] <7>[ 50.283213] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 50.283725] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 50.283918] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 50.284151] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 50.284442] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:262:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 50.284447] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:262:eDP-1] ELD monitor <7>[ 50.284452] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:262:eDP-1] ELD size 20, SAD count 0 <7>[ 50.284526] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:262:eDP-1] VRR capable: no <7>[ 50.284686] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:262:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 50.284843] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:262:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 50.285791] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:eDP-1] status updated from unknown to connected <7>[ 50.286053] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 50.286391] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:eDP-1] probed modes: <7>[ 50.286399] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 50.286403] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:271:DP-1] <7>[ 50.286407] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:271:DP-1] <7>[ 50.290862] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:271:DP-1] disconnected <7>[ 50.290870] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:283:HDMI-A-1] <7>[ 50.290874] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:283:HDMI-A-1] <7>[ 50.295341] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:283:HDMI-A-1] disconnected <7>[ 50.295349] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:DP-2] <7>[ 50.295353] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:289:DP-2] <7>[ 50.295833] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:DP-2] disconnected <7>[ 50.295839] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:298:HDMI-A-2] <7>[ 50.295842] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:298:HDMI-A-2] <7>[ 50.300377] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:298:HDMI-A-2] disconnected <7>[ 50.300384] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:302:DP-3] <7>[ 50.300387] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:302:DP-3] <7>[ 50.300674] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:302:DP-3] disconnected <7>[ 50.300678] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:311:DP-4] <7>[ 50.300682] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:311:DP-4] <7>[ 50.301005] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:311:DP-4] disconnected <7>[ 50.301007] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:eDP-1] enabled? yes <7>[ 50.301011] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:271:DP-1] enabled? no <7>[ 50.301013] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:283:HDMI-A-1] enabled? no <7>[ 50.301015] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:289:DP-2] enabled? no <7>[ 50.301017] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:298:HDMI-A-2] enabled? no <7>[ 50.301019] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:302:DP-3] enabled? no <7>[ 50.301020] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:311:DP-4] enabled? no <7>[ 50.301164] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 50.301184] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:eDP-1] found preferred mode: 2880x1800 <7>[ 50.301186] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 50.301197] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:88:pipe A] desired mode 2880x1800 set (0,0) <7>[ 50.301295] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7>[ 50.301316] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] re-using BIOS fb <7>[ 50.301537] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 2880x1800 fb: 0x00000000 <6>[ 50.302811] fbcon: i915drmfb (fb0) is primary device <7>[ 50.304113] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:262:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 50.304336] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:261:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 max link_bpp 30.0000 <7>[ 50.304524] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 link rate required 1926825 available 2160000 <7>[ 50.304714] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 50.304908] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:261:DDI A/PHY A] [CRTC:88:pipe A] <7>[ 50.305109] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 623587/524288, found tu 64, data 7483046/8388608 link 498869/524288) <7>[ 50.305299] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in dpll_hw_state <7>[ 50.305485] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7>[ 50.305666] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 50.305847] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_hw_state: clock: 432000, fracen: no, <7>[ 50.306047] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] multiplier: 225, tx_clk_div: 1. <7>[ 50.306219] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_rawhw_state: <7>[ 50.306385] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] tx: 0x10, cmn: 0x21 <7>[ 50.306550] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 50.306724] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 50.306889] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 50.307087] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 50.307258] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 50.307427] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7>[ 50.307595] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 50.307768] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_hw_state: clock: 540000, fracen: yes, <7>[ 50.307938] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] quot: 40960, rem: 0, den: 1, <7>[ 50.308114] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 50.308286] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_rawhw_state: <7>[ 50.308462] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] tx: 0x10, cmn: 0x21 <7>[ 50.308634] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 50.308808] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 50.308977] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 50.309155] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 50.309331] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 50.309504] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 50.309678] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in port_clock (expected 432000, found 540000) <7>[ 50.309856] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in set_context_latency (expected 0, found 1) <7>[ 50.310034] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:88:pipe A] fastset requirement not met, forcing full modeset <7>[ 50.310218] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:88:pipe A] releasing DPLL 0 <7>[ 50.310458] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 50.310653] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 <7>[ 50.310856] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 0, 73, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 <7>[ 50.311038] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 0, 82, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 <7>[ 50.311227] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 50.311400] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:43:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.311573] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:43:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.311745] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.311901] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 50.312051] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:53:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.312207] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:53:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.312440] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.312611] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 50.312772] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:63:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.312930] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:63:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.313086] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.313262] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 50.313498] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:73:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.313730] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:73:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.313966] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.314176] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:83:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 50.314375] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:83:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.314594] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:83:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.314817] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:83:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.315068] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200 <7>[ 50.315250] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 50.315464] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 50.315648] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 50.315830] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159 <7>[ 50.316028] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:88:pipe A] allocated DPLL 0 <7>[ 50.316206] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:88:pipe A] reserving DPLL 0 <7>[ 50.316400] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:88:pipe A] enable: yes [modeset] <7>[ 50.316605] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 50.316802] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 50.316990] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 50.317168] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 50.317342] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7>[ 50.317529] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 50.317694] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 50.317860] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 50.318037] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7>[ 50.318210] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7>[ 50.318375] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7>[ 50.318549] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7>[ 50.318707] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 50.318869] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 4, length 14 <7>[ 50.319035] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7>[ 50.319208] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7>[ 50.319369] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7>[ 50.319529] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7>[ 50.319725] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7>[ 50.319889] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7>[ 50.320053] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 1 <7>[ 50.320221] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1878, vmax: 1878, flipline: 1878, pipeline full: 0, guardband: 76 vsync start: 75, vsync end: 69 <7>[ 50.320378] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1878, vmax vtotal: 1878 <7>[ 50.320529] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 50.320750] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 50.320910] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 50.321072] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 50.321239] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 50.321396] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820, min cdclk 256910 <7>[ 50.321555] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 50.321736] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 50.321912] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 50.321924] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 50.322094] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 50.322138] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 50.322268] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 50.322338] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 50.322439] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: clock: 540000, fracen: yes, <7>[ 50.322525] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 50.322607] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] quot: 40960, rem: 0, den: 1, <7>[ 50.322752] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 50.322793] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 50.322921] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 50.322951] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state: <7>[ 50.323091] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 50.323117] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21 <7>[ 50.323260] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 50.323282] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 50.323433] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 50.323419] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 50.323584] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 50.323590] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 50.323749] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 50.323763] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 50.323915] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 50.323935] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 50.324086] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 50.324109] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 50.324245] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 50.324274] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 50.324404] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 50.324442] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 50.324561] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.324608] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 50.324718] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.324773] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 50.324901] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.324938] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 50.325068] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 50.325105] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 50.325222] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 50.325258] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 50.325373] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.325412] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 50.325525] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.325564] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 50.325676] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.325721] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 50.325848] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 50.325897] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 50.326008] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 50.326071] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 50.326178] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:320] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 50.326247] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 50.326349] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 50.326416] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 50.326501] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 50.326571] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 50.326657] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7>[ 50.326727] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 50.326810] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:plane 3A] fb: [NOFB], visible: no <7>[ 50.326902] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 50.326991] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 4A] fb: [NOFB], visible: no <7>[ 50.327058] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 50.327145] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:73:plane 5A] fb: [NOFB], visible: no <7>[ 50.327213] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 50.327297] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:83:cursor A] fb: [NOFB], visible: no <7>[ 50.327368] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 50.327521] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 50.327675] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 50.327828] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <6>[ 50.332799] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 50.333690] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <6>[ 50.334177] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 <6>[ 50.334719] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <7>[ 50.336773] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <6>[ 50.352017] i915 0000:00:02.0: [drm] GT1: Loaded GSC firmware i915/mtl_gsc_1.bin (cv1.0, r102.1.15.1926, svn 1) <7>[ 50.372824] i915 0000:00:02.0: [drm:intel_huc_wait_for_auth_complete [i915]] GT1: HuC: auth took 0ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x00116C68, count = 0, ret = 0 <6>[ 50.373065] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for all workloads <7>[ 50.546868] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:262:eDP-1] set backlight PWM = 0 <7>[ 50.548170] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7>[ 50.561517] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000 <7>[ 50.561649] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:261:DDI A/PHY A] PPS 0 turn panel power off <7>[ 50.562253] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:261:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 50.562189] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:261:DDI A/PHY A] - short <7>[ 50.562766] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:261:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 50.614594] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7>[ 50.615135] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:261:DDI A/PHY A] - long <7>[ 50.615556] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7>[ 50.618693] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 50.619772] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:88:pipe A] <7>[ 50.619832] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:261:DDI A/PHY A] <7>[ 50.620615] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:261:DDI A/PHY A] <7>[ 50.621605] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7>[ 50.622286] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7>[ 50.623193] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:33:plane 1A] <7>[ 50.623525] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0xffff0072 0x13421c72) <7>[ 50.623794] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:261:DDI A/PHY A] <7>[ 50.624050] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:270:DDI B/PHY B] <7>[ 50.624286] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:272:DP-MST A] <7>[ 50.624520] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:273:DP-MST B] <7>[ 50.624714] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:274:DP-MST C] <7>[ 50.624863] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DP-MST D] <7>[ 50.625026] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:288:DDI TC1/PHY TC1] <7>[ 50.625175] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:290:DP-MST A] <7>[ 50.625324] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:291:DP-MST B] <7>[ 50.625473] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:292:DP-MST C] <7>[ 50.625621] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:293:DP-MST D] <7>[ 50.625769] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:297:DDI TC2/PHY TC2] <7>[ 50.625915] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:301:DDI TC3/PHY TC3] <7>[ 50.626074] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:303:DP-MST A] <7>[ 50.626221] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:304:DP-MST B] <7>[ 50.626370] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:305:DP-MST C] <7>[ 50.626518] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:306:DP-MST D] <7>[ 50.626667] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:310:DDI TC4/PHY TC4] <7>[ 50.626819] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:312:DP-MST A] <7>[ 50.626967] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:313:DP-MST B] <7>[ 50.627125] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:314:DP-MST C] <7>[ 50.627275] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:315:DP-MST D] <7>[ 50.627514] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 50.628950] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:88:pipe A] <7>[ 50.629158] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7>[ 50.630795] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:261:DDI A/PHY A] PPS 0 turn panel power on <7>[ 50.630969] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:261:DDI A/PHY A] PPS 0 wait for panel power cycle (489 ms remaining) <7>[ 50.834012] i915 0000:00:02.0: [drm:gsc_work [i915]] GT1: GSC Proxy initialized <7>[ 51.146206] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:261:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7>[ 51.207986] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 51.208776] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:261:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 51.209580] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:261:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 51.240807] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7>[ 51.241449] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:261:DDI A/PHY A] - long <7>[ 51.242044] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20 <7>[ 51.242725] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:261:DDI A/PHY A] <7>[ 51.363454] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.363423] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.364343] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.364892] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.412283] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 51.413492] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:261:DDI A/PHY A] PPS 0 turning VDD on <7>[ 51.414200] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:261:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 51.418242] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 51.419166] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:262:eDP-1][ENCODER:261:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 51.419984] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:262:eDP-1][ENCODER:261:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07 <7>[ 51.421079] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:262:eDP-1][ENCODER:261:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 51.421842] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:262:eDP-1][ENCODER:261:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 51.422766] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:262:eDP-1][ENCODER:261:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 51.422943] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:262:eDP-1][ENCODER:261:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7>[ 51.424254] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:262:eDP-1][ENCODER:261:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 51.424401] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:262:eDP-1][ENCODER:261:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7>[ 51.425060] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7>[ 51.425356] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7>[ 51.425518] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7>[ 51.425732] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:262:eDP-1] set backlight PWM = 192000 <7>[ 51.436618] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2 <7>[ 51.438487] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:262:eDP-1] <7>[ 51.438741] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:88:pipe A] <7>[ 51.440262] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 51.441678] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0x2000071 0x13421c72) <7>[ 51.442165] i915 0000:00:02.0: [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=9600/192000 <6>[ 51.442271] Console: switching to colour frame buffer device 180x56 <7>[ 51.442503] i915 0000:00:02.0: [drm:intel_panel_actually_set_backlight [i915]] [CONNECTOR:262:eDP-1] set backlight level = 13892 <6>[ 51.449448] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7>[ 51.449471] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 14 <7>[ 51.449712] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: C0 <7>[ 51.449912] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7>[ 51.450083] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: yes <7>[ 51.450245] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: yes <7>[ 51.450405] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7>[ 51.450563] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7>[ 51.450721] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: yes <7>[ 51.450905] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7>[ 51.451068] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7>[ 51.451227] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7>[ 51.451386] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7>[ 51.451544] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7>[ 51.451702] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7>[ 51.451885] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7>[ 51.452041] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: no <7>[ 51.452198] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7>[ 51.452354] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7>[ 51.452511] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7>[ 51.452667] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7>[ 51.452829] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: yes <7>[ 51.453012] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 38400 kHz <7>[ 51.453446] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7>[ 51.453618] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D <7>[ 51.453986] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C <7>[ 51.454194] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B <7>[ 51.454400] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 51.454648] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x7d55 rev=0x08 platform=METEORLAKE (subplatform=0x0) gen=12 <7>[ 51.454789] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 12.71 <7>[ 51.454943] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 13 <7>[ 51.455077] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: B0 <7>[ 51.455210] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: C0 <7>[ 51.455342] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 0 <7>[ 51.455473] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x41 <7>[ 51.455602] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x211000 <7>[ 51.455730] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: METEORLAKE <7>[ 51.455858] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7>[ 51.456048] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7>[ 51.456182] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 46 <7>[ 51.456311] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7>[ 51.456439] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7>[ 51.456567] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7>[ 51.456693] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7>[ 51.456820] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7>[ 51.456957] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7>[ 51.457147] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7>[ 51.457276] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7>[ 51.457403] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7>[ 51.457530] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: yes <7>[ 51.457656] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: yes <7>[ 51.457781] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7>[ 51.457905] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7>[ 51.458055] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7>[ 51.458183] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: yes <7>[ 51.458310] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: yes <7>[ 51.458436] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7>[ 51.458560] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7>[ 51.458684] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: no <7>[ 51.458839] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7>[ 51.459012] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: yes <7>[ 51.459182] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7>[ 51.459312] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7>[ 51.459438] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: yes <7>[ 51.459565] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: yes <7>[ 51.459689] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: yes <7>[ 51.459814] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7>[ 51.459950] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: yes <7>[ 51.460082] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7>[ 51.460245] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7>[ 51.460370] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7>[ 51.460494] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7>[ 51.460617] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: yes <7>[ 51.460740] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: no <7>[ 51.460866] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7>[ 51.460990] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7>[ 51.461119] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7>[ 51.461278] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7>[ 51.461405] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7>[ 51.461531] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 400003 <7>[ 51.461656] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 8 <7>[ 51.461779] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: geometry dss mask=00000000,000000ff <7>[ 51.461903] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: compute dss mask=00000000,000000ff <7>[ 51.462029] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 128 <7>[ 51.462159] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 16 <7>[ 51.462319] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7>[ 51.462443] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7>[ 51.462566] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: no <7>[ 51.462691] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 4041400 <7>[ 51.462815] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 8 <7>[ 51.462939] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: geometry dss mask=00000000,0000ff00 <7>[ 51.463062] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: compute dss mask=00000000,0000ff00 <7>[ 51.463189] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 128 <7>[ 51.463351] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 16 <7>[ 51.463481] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7>[ 51.463605] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7>[ 51.463730] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: no <6>[ 51.463853] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6>[ 51.463854] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6>[ 51.463854] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7>[ 51.469913] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 51.469924] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 51.470140] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:eDP-1] <7>[ 51.470148] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:262:eDP-1] <7>[ 51.470934] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 51.471386] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 51.471554] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 51.471693] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 51.471901] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:262:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 51.471906] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:262:eDP-1] ELD monitor <7>[ 51.471912] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:262:eDP-1] ELD size 20, SAD count 0 <7>[ 51.471931] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:262:eDP-1] VRR capable: no <7>[ 51.472074] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:262:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 51.472243] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:262:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 51.473187] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:eDP-1] probed modes: <7>[ 51.473195] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 51.473198] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:271:DP-1] <7>[ 51.473201] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:271:DP-1] <7>[ 51.477541] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:271:DP-1] disconnected <7>[ 51.477546] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:283:HDMI-A-1] <7>[ 51.477548] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:283:HDMI-A-1] <7>[ 51.481904] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:283:HDMI-A-1] disconnected <7>[ 51.481909] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:DP-2] <7>[ 51.481912] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:289:DP-2] <7>[ 51.482218] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 51.482426] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:DP-2] disconnected <7>[ 51.482430] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:298:HDMI-A-2] <7>[ 51.482432] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:298:HDMI-A-2] <7>[ 51.482714] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7>[ 51.487132] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:298:HDMI-A-2] disconnected <7>[ 51.487137] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:302:DP-3] <7>[ 51.487140] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:302:DP-3] <7>[ 51.487406] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 51.487624] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:302:DP-3] disconnected <7>[ 51.487627] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:311:DP-4] <7>[ 51.487629] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:311:DP-4] <7>[ 51.487866] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 51.488077] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:311:DP-4] disconnected <7>[ 51.488079] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:eDP-1] enabled? yes <7>[ 51.488083] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:271:DP-1] enabled? no <7>[ 51.488086] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:283:HDMI-A-1] enabled? no <7>[ 51.488102] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:289:DP-2] enabled? no <7>[ 51.488104] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:298:HDMI-A-2] enabled? no <7>[ 51.488105] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:302:DP-3] enabled? no <7>[ 51.488107] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:311:DP-4] enabled? no <7>[ 51.488223] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 51.488240] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:eDP-1] found preferred mode: 2880x1800 <7>[ 51.488242] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 51.488272] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:88:pipe A] desired mode 2880x1800 set (0,0) <7>[ 51.492658] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 51.503922] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 51.504007] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 51.504521] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:eDP-1] <7>[ 51.504535] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:262:eDP-1] <7>[ 51.505690] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 51.506339] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 51.506617] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 51.506916] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 51.507128] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:262:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 51.507132] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:262:eDP-1] ELD monitor <7>[ 51.507138] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:262:eDP-1] ELD size 20, SAD count 0 <7>[ 51.507199] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:262:eDP-1] VRR capable: no <7>[ 51.507339] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:262:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 51.507474] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:262:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 51.508333] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:eDP-1] probed modes: <7>[ 51.508339] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 51.508343] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:271:DP-1] <7>[ 51.508345] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:271:DP-1] <7>[ 51.512695] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:271:DP-1] disconnected <7>[ 51.512699] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:283:HDMI-A-1] <7>[ 51.512701] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:283:HDMI-A-1] <7>[ 51.517052] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:283:HDMI-A-1] disconnected <7>[ 51.517055] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:DP-2] <7>[ 51.517058] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:289:DP-2] <7>[ 51.517427] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:DP-2] disconnected <7>[ 51.517430] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:298:HDMI-A-2] <7>[ 51.517433] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:298:HDMI-A-2] <7>[ 51.521918] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:298:HDMI-A-2] disconnected <7>[ 51.521922] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:302:DP-3] <7>[ 51.521924] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:302:DP-3] <7>[ 51.522176] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:302:DP-3] disconnected <7>[ 51.522179] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:311:DP-4] <7>[ 51.522181] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:311:DP-4] <7>[ 51.522451] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:311:DP-4] disconnected <7>[ 51.522453] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:eDP-1] enabled? yes <7>[ 51.522455] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:271:DP-1] enabled? no <7>[ 51.522456] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:283:HDMI-A-1] enabled? no <7>[ 51.522458] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:289:DP-2] enabled? no <7>[ 51.522459] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:298:HDMI-A-2] enabled? no <7>[ 51.522461] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:302:DP-3] enabled? no <7>[ 51.522462] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:311:DP-4] enabled? no <7>[ 51.522551] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 51.522565] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:eDP-1] found preferred mode: 2880x1800 <7>[ 51.522567] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 51.522590] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:88:pipe A] desired mode 2880x1800 set (0,0) <7>[ 51.525670] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 51.529101] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 51.536791] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c] <7>[ 51.559112] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 51.559194] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 51.560829] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509 <7>[ 51.581203] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 51.581316] [IGT] i915_module_load: finished subtest load, SUCCESS <7>[ 51.581761] [IGT] i915_module_load: exiting, ret=0 <7>[ 52.553559] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 52.619474] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 52.619564] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 52.619602] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4 <7>[ 54.134919] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:261:DDI A/PHY A] PPS 0 turning VDD off <7>[ 54.135603] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:261:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 <7>[ 54.136198] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 54.136936] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 54.137334] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02