Results for igt@kms_pm_dc@dc5-retention-flops

Result: Skip

integration-manifest git-log-oneline i915_display_info12 igt_runner12 runtimes12 results12.json results12-i915-load.json i915_display_info_post_exec12 boot12 dmesg12

DetailValue
Duration 0.00 seconds
Hostname 
shard-rkl-6
Igt-Version 
IGT-Version: 2.2-g3f90f16d1 (x86_64) (Linux: 6.18.0-rc5-Patchwork_157473v1-g2395af7950ab+ x86_64)
Out 
Using IGT_SRANDOM=1763022618 for randomisation
Opened device: /dev/dri/card0
DMC: fw loaded: yes
Starting subtest: dc5-retention-flops
Test requirement not met in function __igt_unique____real_main733, file ../tests/intel/kms_pm_dc.c:806:
Test requirement: intel_display_ver(data.devid) >= 30
Test not supported on this platform.
Subtest dc5-retention-flops: SKIP (0.000s)
Err 
Starting subtest: dc5-retention-flops
Subtest dc5-retention-flops: SKIP (0.000s)
Dmesg
<7> [213.236301] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<6> [213.242818] [IGT] kms_pm_dc: executing
<7> [213.254716] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [213.255404] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [213.255652] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [214.258175] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [214.264274] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [214.265665] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [214.265901] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [214.266189] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [214.266370] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [214.266548] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [214.290473] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [214.290883] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [214.291612] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [214.292352] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [214.293082] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [214.293890] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [214.294629] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [214.295355] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [214.296037] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [214.297528] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [214.298160] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [214.299000] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [214.301211] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [214.301773] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [214.310809] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [214.312000] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [214.312206] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [214.318103] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [214.323072] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [214.327923] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [214.333943] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [214.334099] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [214.338850] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [214.339269] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:148:HDMI-A-1]
<7> [214.339276] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [214.340205] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [214.340466] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [214.340747] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [214.340888] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [214.341058] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [214.364708] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [214.364949] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [214.365335] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [214.365743] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [214.366311] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [214.366736] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [214.367204] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [214.367752] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [214.368202] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [214.369309] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [214.369706] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [214.370589] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [214.371320] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [214.371494] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [214.384991] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [214.385097] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [214.391132] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:148:HDMI-A-1] disconnected
<7> [214.391187] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [214.396055] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [214.400973] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [214.405799] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [214.410658] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [214.410807] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [214.410948] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:158:HDMI-A-2]
<7> [214.410954] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [214.415509] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [214.416930] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [214.417215] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [214.417546] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [214.417697] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [214.417883] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [214.441466] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [214.441709] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [214.442133] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [214.442678] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [214.443247] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [214.443919] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [214.444444] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [214.444973] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [214.445631] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [214.446895] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [214.447465] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [214.448748] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [214.450895] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [214.451424] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [214.461597] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [214.461744] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [214.467718] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:158:HDMI-A-2] disconnected
<7> [214.467799] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [214.472643] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [214.478712] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [214.483615] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [214.489644] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [214.489792] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [214.489889] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:162:DP-1]
<7> [214.489894] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [214.494559] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [214.495939] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [214.496204] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [214.496585] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [214.496735] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [214.496916] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [214.520496] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [214.520751] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [214.521144] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [214.521612] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [214.522111] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [214.522736] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [214.523300] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [214.523847] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [214.524395] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [214.524922] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [214.525383] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [214.526014] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [214.527983] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [214.528533] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [214.539999] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [214.540106] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [214.544906] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:162:DP-1] disconnected
<7> [214.544973] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [214.549774] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [214.555839] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [214.560736] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [214.781713] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [214.781975] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:169:HDMI-A-3]
<7> [214.781945] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [214.781980] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [214.787773] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [214.789171] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [214.789456] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [214.789736] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [214.789876] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [214.790046] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [214.813470] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [214.813666] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [214.814000] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [214.814438] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [214.814896] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [214.815447] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [214.815858] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [214.816271] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [214.816709] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [214.817167] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [214.817586] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [214.818103] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [214.819673] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [214.820142] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [214.829045] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [214.829195] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [214.833954] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:169:HDMI-A-3] disconnected
<7> [214.834039] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [214.838836] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [214.843735] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [214.848586] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [214.853468] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [214.853628] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [214.853769] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:148:HDMI-A-1]
<7> [214.853777] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [214.858268] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [214.859683] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [214.859925] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [214.860219] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [214.860412] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [214.860610] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [214.884471] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [214.884749] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [214.885169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [214.885693] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [214.886276] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [214.887014] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [214.887589] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [214.888130] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [214.888679] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [214.889350] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [214.889919] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [214.890689] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [214.892772] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [214.893362] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [214.903846] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [214.903992] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [214.909947] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:148:HDMI-A-1] disconnected
<7> [214.909984] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:158:HDMI-A-2]
<7> [214.909988] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [214.916024] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:158:HDMI-A-2] disconnected
<7> [214.916063] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [214.920951] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [214.925836] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [214.930703] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [214.935601] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:162:DP-1]
<7> [214.935585] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [214.935607] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [214.935744] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [214.940426] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [214.941788] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [214.942045] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [214.942345] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [214.942527] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [214.942709] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [214.966475] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [214.966708] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [214.967156] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [214.967714] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [214.968261] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [214.968950] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [214.969470] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [214.969987] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [214.970656] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [214.971262] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [214.971816] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [214.972505] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [214.974691] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [214.975465] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [214.985798] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [214.985938] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [214.990678] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:162:DP-1] disconnected
<7> [214.990708] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:169:HDMI-A-3]
<7> [214.990712] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [214.996738] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:169:HDMI-A-3] disconnected
<7> [214.996823] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [215.001650] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [215.007691] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [215.013787] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [215.018728] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [215.018897] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<6> [215.020213] [IGT] kms_pm_dc: starting subtest dc5-retention-flops
<6> [215.021222] [IGT] kms_pm_dc: finished subtest dc5-retention-flops, SKIP
<7> [215.023591] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<6> [215.023706] [IGT] kms_pm_dc: exiting, ret=77
<7> [215.024974] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [215.025069] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [215.025216] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [215.025237] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [215.025586] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [215.025731] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [215.025906] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
Created at 2025-11-13 09:20:59