Results for igt@kms_pm_dc@dc6-dpms

Result: Fail

integration-manifest git-log-oneline i915_display_info7 igt_runner7 runtimes7 results7.json results7-i915-load.json i915_display_info_post_exec7 boot7 dmesg7

DetailValue
Duration 3.34 seconds
Hostname 
shard-rkl-6
Igt-Version 
IGT-Version: 2.2-g815b131e6 (x86_64) (Linux: 6.18.0-rc4-Patchwork_155067v7-g0a7f6a2acbba+ x86_64)
Out 
Using IGT_SRANDOM=1762196533 for randomisation
Opened device: /dev/dri/card0
DMC: fw loaded: yes
Starting subtest: dc6-dpms
Stack trace:
  #0 ../lib/igt_core.c:2075 __igt_fail_assert()
  #1 [check_dc_counter.part.0+0x66]
  #2 [test_dc_state_dpms+0x72]
  #3 ../tests/intel/kms_pm_dc.c:827 __igt_unique____real_main733()
  #4 [main+0x2d]
  #5 [__libc_init_first+0x8a]
  #6 [__libc_start_main+0x8b]
  #7 [_start+0x25]
Subtest dc6-dpms: FAIL (3.344s)
Err 
Starting subtest: dc6-dpms
(kms_pm_dc:2365) CRITICAL: Test assertion failure function check_dc_counter, file ../tests/intel/kms_pm_dc.c:329:
(kms_pm_dc:2365) CRITICAL: Failed assertion: dc_state_wait_entry(data->debugfs_fd, dc_flag, prev_dc_count)
(kms_pm_dc:2365) CRITICAL: DC6 state is not achieved
i915_power_domain_info:
Runtime power status: enabled
Power well/domain         Use count
always-on                 0
  DISPLAY_CORE            0
  PIPE_A                  0
  PIPE_B                  0
  PIPE_C                  0
  PIPE_D                  0
  PIPE_PANEL_FITTER_A     0
  PIPE_PANEL_FITTER_B     0
  PIPE_PANEL_FITTER_C     0
  PIPE_PANEL_FITTER_D     0
  TRANSCODER_A            0
  TRANSCODER_B            0
  TRANSCODER_C            0
  TRANSCODER_D            0
  TRANSCODER_EDP          0
  TRANSCODER_DSI_A        0
  TRANSCODER_DSI_C        0
  TRANSCODER_VDSC_PW2     0
  PORT_DDI_LANES_A        0
  PORT_DDI_LANES_B        0
  PORT_DDI_LANES_C        0
  PORT_DDI_LANES_D        0
  PORT_DDI_LANES_E        0
  PORT_DDI_LANES_F        0
  PORT_DDI_LANES_TC1      0
  PORT_DDI_LANES_TC2      0
  PORT_DDI_LANES_TC3      0
  PORT_DDI_LANES_TC4      0
  PORT_DDI_LANES_TC5      0
  PORT_DDI_LANES_TC6      0
  PORT_DDI_IO_A           0
  PORT_DDI_IO_B           0
  PORT_DDI_IO_C           0
  PORT_DDI_IO_D           0
  PORT_DDI_IO_E           0
  PORT_DDI_IO_F           0
  PORT_DDI_IO_TC1         0
  PORT_DDI_IO_TC2         0
  PORT_DDI_IO_TC3         0
  PORT_DDI_IO_TC4         0
  PORT_DDI_IO_TC5         0
  PORT_DDI_IO_TC6         0
  PORT_DSI                0
  PORT_CRT                0
  PORT_OTHER              0
  VGA                     0
  AUDIO_MMIO              0
  AUDIO_PLAYBACK          0
  AUX_IO_A                0
  AUX_IO_B                0
  AUX_IO_C                0
  AUX_IO_D                0
  AUX_IO_E                0
  AUX_IO_F                0
  AUX_A                   0
  AUX_B                   0
  AUX_C                   0
  AUX_D                   0
  AUX_E                   0
  AUX_F                   0
  AUX_USBC1               0
  AUX_USBC2               0
  AUX_USBC3               0
  AUX_USBC4               0
  AUX_USBC5               0
  AUX_USBC6               0
  AUX_TBT1                0
  AUX_TBT2                0
  AUX_TBT3                0
  AUX_TBT4                0
  AUX_TBT5                0
  AUX_TBT6                0
  GMBUS                   0
  GT_IRQ                  0
  DC_OFF                  0
  TC_COLD_OFF             0
  INIT                    0
PW_1                      0
DC_off                    0
  PIPE_B                  0
  PIPE_C                  0
  PIPE_PANEL_FITTER_B     0
  PIPE_PANEL_FITTER_C     0
  TRANSCODER_B            0
  TRANSCODER_C            0
  PORT_DDI_LANES_TC1      0
  PORT_DDI_LANES_TC2      0
  VGA                     0
  AUDIO_MMIO              0
  AUDIO_PLAYBACK          0
  AUX_A                   0
  AUX_B                   0
  AUX_USBC1               0
  AUX_USBC2               0
  DC_OFF                  0
  INIT                    0
PW_3                      0
  PIPE_B                  0
  PIPE_C                  0
  PIPE_PANEL_FITTER_B     0
  PIPE_PANEL_FITTER_C     0
  TRANSCODER_B            0
  TRANSCODER_C            0
  PORT_DDI_LANES_TC1      0
  PORT_DDI_LANES_TC2      0
  VGA                     0
  AUDIO_MMIO              0
  AUDIO_PLAYBACK          0
  AUX_USBC1               0
  AUX_USBC2               0
  INIT                    0
PW_4                      0
  PIPE_C                  0
  PIPE_PANEL_FITTER_C     0
  TRANSCODER_C            0
  INIT                    0
DDI_IO_A                  0
  PORT_DDI_IO_A           0
DDI_IO_B                  0
  PORT_DDI_IO_B           0
DDI_IO_TC1                0
  PORT_DDI_IO_TC1         0
DDI_IO_TC2                0
  PORT_DDI_IO_TC2         0
AUX_A                     0
  AUX_IO_A                0
  AUX_A                   0
AUX_B                     0
  AUX_IO_B                0
  AUX_B                   0
AUX_USBC1                 0
  AUX_USBC1               0
AUX_USBC2                 0
  AUX_USBC2               0
Subtest dc6-dpms failed.
**** DEBUG ****
(kms_pm_dc:2365) DEBUG: Test requirement passed: igt_pm_pc8_plus_residencies_enabled(data.msr_fd)
(kms_pm_dc:2365) DEBUG: Test requirement passed: !(!str)
(kms_pm_dc:2365) CRITICAL: Test assertion failure function check_dc_counter, file ../tests/intel/kms_pm_dc.c:329:
(kms_pm_dc:2365) CRITICAL: Failed assertion: dc_state_wait_entry(data->debugfs_fd, dc_flag, prev_dc_count)
(kms_pm_dc:2365) CRITICAL: DC6 state is not achieved
i915_power_domain_info:
Runtime power status: enabled
Power well/domain         Use count
always-on                 0
  DISPLAY_CORE            0
  PIPE_A                  0
  PIPE_B                  0
  PIPE_C                  0
  PIPE_D                  0
  PIPE_PANEL_FITTER_A     0
  PIPE_PANEL_FITTER_B     0
  PIPE_PANEL_FITTER_C     0
  PIPE_PANEL_FITTER_D     0
  TRANSCODER_A            0
  TRANSCODER_B            0
  TRANSCODER_C            0
  TRANSCODER_D            0
  TRANSCODER_EDP          0
  TRANSCODER_DSI_A        0
  TRANSCODER_DSI_C        0
  TRANSCODER_VDSC_PW2     0
  PORT_DDI_LANES_A        0
  PORT_DDI_LANES_B        0
  PORT_DDI_LANES_C        0
  PORT_DDI_LANES_D        0
  PORT_DDI_LANES_E        0
  PORT_DDI_LANES_F        0
  PORT_DDI_LANES_TC1      0
  PORT_DDI_LANES_TC2      0
  PORT_DDI_LANES_TC3      0
  PORT_DDI_LANES_TC4      0
  PORT_DDI_LANES_TC5      0
  PORT_DDI_LANES_TC6      0
  PORT_DDI_IO_A           0
  PORT_DDI_IO_B           0
  PORT_DDI_IO_C           0
  PORT_DDI_IO_D           0
  PORT_DDI_IO_E           0
  PORT_DDI_IO_F           0
  PORT_DDI_IO_TC1         0
  PORT_DDI_IO_TC2         0
  PORT_DDI_IO_TC3         0
  PORT_DDI_IO_TC4         0
  PORT_DDI_IO_TC5         0
  PORT_DDI_IO_TC6         0
  PORT_DSI                0
  PORT_CRT                0
  PORT_OTHER              0
  VGA                     0
  AUDIO_MMIO              0
  AUDIO_PLAYBACK          0
  AUX_IO_A                0
  AUX_IO_B                0
  AUX_IO_C                0
  AUX_IO_D                0
  AUX_IO_E                0
  AUX_IO_F                0
  AUX_A                   0
  AUX_B                   0
  AUX_C                   0
  AUX_D                   0
  AUX_E                   0
  AUX_F                   0
  AUX_USBC1               0
  AUX_USBC2               0
  AUX_USBC3               0
  AUX_USBC4               0
  AUX_USBC5               0
  AUX_USBC6               0
  AUX_TBT1                0
  AUX_TBT2                0
  AUX_TBT3                0
  AUX_TBT4                0
  AUX_TBT5                0
  AUX_TBT6                0
  GMBUS                   0
  GT_IRQ                  0
  DC_OFF                  0
  TC_COLD_OFF             0
  INIT                    0
PW_1                      0
DC_off                    0
  PIPE_B                  0
  PIPE_C                  0
  PIPE_PANEL_FITTER_B     0
  PIPE_PANEL_FITTER_C     0
  TRANSCODER_B            0
  TRANSCODER_C            0
  PORT_DDI_LANES_TC1      0
  PORT_DDI_LANES_TC2      0
  VGA                     0
  AUDIO_MMIO              0
  AUDIO_PLAYBACK          0
  AUX_A                   0
  AUX_B                   0
  AUX_USBC1               0
  AUX_USBC2               0
  DC_OFF                  0
  INIT                    0
PW_3                      0
  PIPE_B                  0
  PIPE_C                  0
  PIPE_PANEL_FITTER_B     0
  PIPE_PANEL_FITTER_C     0
  TRANSCODER_B            0
  TRANSCODER_C            0
  PORT_DDI_LANES_TC1      0
  PORT_DDI_LANES_TC2      0
  VGA                     0
  AUDIO_MMIO              0
  AUDIO_PLAYBACK          0
  AUX_USBC1               0
  AUX_USBC2               0
  INIT                    0
PW_4                      0
  PIPE_C                  0
  PIPE_PANEL_FITTER_C     0
  TRANSCODER_C            0
  INIT                    0
DDI_IO_A                  0
  PORT_DDI_IO_A           0
DDI_IO_B                  0
  PORT_DDI_IO_B           0
DDI_IO_TC1                0
  PORT_DDI_IO_TC1         0
DDI_IO_TC2                0
  PORT_DDI_IO_TC2         0
AUX_A                     0
  AUX_IO_A                0
  AUX_A                   0
AUX_B                     0
  AUX_IO_B                0
  AUX_B                   0
AUX_USBC1                 0
  AUX_USBC1               0
AUX_USBC2                 0
  AUX_USBC2               0
(kms_pm_dc:2365) igt_core-INFO: Stack trace:
(kms_pm_dc:2365) igt_core-INFO:   #0 ../lib/igt_core.c:2075 __igt_fail_assert()
(kms_pm_dc:2365) igt_core-INFO:   #1 [check_dc_counter.part.0+0x66]
(kms_pm_dc:2365) igt_core-INFO:   #2 [test_dc_state_dpms+0x72]
(kms_pm_dc:2365) igt_core-INFO:   #3 ../tests/intel/kms_pm_dc.c:827 __igt_unique____real_main733()
(kms_pm_dc:2365) igt_core-INFO:   #4 [main+0x2d]
(kms_pm_dc:2365) igt_core-INFO:   #5 [__libc_init_first+0x8a]
(kms_pm_dc:2365) igt_core-INFO:   #6 [__libc_start_main+0x8b]
(kms_pm_dc:2365) igt_core-INFO:   #7 [_start+0x25]
****  END  ****
Subtest dc6-dpms: FAIL (3.344s)
Dmesg
<7> [386.328002] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [386.328219] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [386.328399] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [386.329727] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<6> [386.334039] Console: switching to colour dummy device 80x25
<6> [386.334091] [IGT] kms_pm_dc: executing
<7> [386.341366] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [386.341915] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [386.342118] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [387.344462] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [387.350525] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [387.351911] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [387.352152] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [387.352440] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [387.352584] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [387.352845] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [387.377823] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [387.378225] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [387.378944] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [387.379672] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [387.380428] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.381303] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.382091] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.382820] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.383533] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [387.384328] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [387.384652] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [387.384909] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [387.385612] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [387.385771] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [387.391982] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [387.393165] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [387.393368] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [387.400169] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [387.404659] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [387.409548] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [387.414841] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [387.415007] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [387.415972] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:148:HDMI-A-1]
<7> [387.415979] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [387.418154] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [387.419562] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [387.419822] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [387.420107] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [387.420265] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [387.420439] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [387.443760] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [387.443960] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [387.444277] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [387.444694] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [387.445151] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.445612] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.446058] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.446489] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.446922] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [387.447386] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [387.447823] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [387.448382] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [387.449777] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [387.449924] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [387.456093] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [387.456203] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [387.461010] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:148:HDMI-A-1] disconnected
<7> [387.461083] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [387.465937] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [387.470814] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [387.476860] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [387.481776] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [387.481948] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [387.482015] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:158:HDMI-A-2]
<7> [387.482020] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [387.484198] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [387.485555] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [387.485867] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [387.486152] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [387.486293] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [387.486464] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [387.509767] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [387.509996] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [387.510370] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [387.510877] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [387.511431] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.512007] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.512542] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.513108] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.513639] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [387.514280] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [387.514836] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [387.515503] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [387.517595] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [387.518228] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [387.527356] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [387.527532] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [387.532312] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:158:HDMI-A-2] disconnected
<7> [387.532399] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [387.537151] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [387.542113] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [387.546913] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [387.551802] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [387.551962] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [387.552026] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:162:DP-1]
<7> [387.552031] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [387.554206] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [387.555550] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [387.555814] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [387.556099] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [387.556240] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [387.556411] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [387.579744] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [387.580015] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [387.580491] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [387.581065] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [387.581625] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.582168] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.582810] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.583464] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.584163] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [387.584849] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [387.585416] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [387.586322] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [387.588631] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [387.589288] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [387.598471] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [387.598653] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [387.603356] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:162:DP-1] disconnected
<7> [387.603441] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [387.608256] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [387.613183] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [387.618004] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [387.622863] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [387.623013] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [387.623273] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:169:HDMI-A-3]
<7> [387.623283] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [387.625322] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [387.626673] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [387.626915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [387.627201] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [387.627345] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [387.627516] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [387.651770] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [387.652079] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [387.652613] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [387.653162] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [387.653777] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.654367] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.655039] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.655712] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.656346] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [387.657055] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [387.657709] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [387.658495] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [387.660780] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [387.661414] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [387.670595] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [387.670763] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [387.675497] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:169:HDMI-A-3] disconnected
<7> [387.675645] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [387.680365] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [387.685348] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [387.690121] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [387.695027] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [387.695176] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [387.695274] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:148:HDMI-A-1]
<7> [387.695279] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [387.697428] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [387.698795] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [387.699033] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [387.699316] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [387.699462] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [387.699714] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [387.723734] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [387.724021] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [387.724494] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [387.725062] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [387.725650] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.726250] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.726912] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.727593] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.728229] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [387.728963] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [387.729525] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [387.730391] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [387.732703] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [387.733343] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [387.742512] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [387.742726] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [387.747426] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:148:HDMI-A-1] disconnected
<7> [387.747464] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:158:HDMI-A-2]
<7> [387.747469] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [387.752275] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:158:HDMI-A-2] disconnected
<7> [387.752352] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [387.757208] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [387.762050] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [387.766965] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [387.771830] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:162:DP-1]
<7> [387.771801] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [387.771836] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [387.771971] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [387.775404] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [387.776823] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [387.777528] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [387.777834] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [387.777979] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [387.778151] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [387.801710] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [387.801981] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [387.802422] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [387.802943] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [387.803472] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.804021] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.804541] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.805126] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.805684] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [387.806264] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [387.806777] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [387.807404] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [387.809575] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [387.810205] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [387.819334] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [387.819579] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [387.824255] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:162:DP-1] disconnected
<7> [387.824285] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:169:HDMI-A-3]
<7> [387.824290] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [387.829123] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:169:HDMI-A-3] disconnected
<7> [387.829206] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [387.833992] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [387.838890] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [387.843743] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [387.849806] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [387.849976] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<6> [387.852319] [IGT] kms_pm_dc: starting subtest dc6-dpms
<7> [387.853488] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [387.854861] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [387.855094] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [387.855380] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [387.855531] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [387.855728] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [387.879706] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [387.879982] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [387.880416] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [387.880924] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [387.881436] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.881983] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.882487] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.883106] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.883718] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [387.884338] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [387.884919] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [387.885617] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [387.887853] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [387.888487] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [387.896416] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [387.897606] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [387.897844] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [387.902517] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [387.907424] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [387.912287] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [387.917151] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<6> [391.196528] [IGT] kms_pm_dc: finished subtest dc6-dpms, FAIL
<6> [391.196876] [IGT] kms_pm_dc: exiting, ret=98
<7> [391.198320] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [391.198816] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [391.198964] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [391.199690] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [391.201128] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [391.202124] Console: switching to colour frame buffer device 128x48
<7> [391.220054] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [391.220297] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [391.220512] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [391.221914] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
Created at 2025-11-03 20:08:51