Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 2.4-gcd3b0cdd9 (x86_64) (Linux: 7.1.0-rc3-CI_DRM_18493-gb9819223b7e9+ x86_64)
Out 
Using IGT_SRANDOM=1778844618 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.032s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.032s)
Dmesg
<6> [246.868745] Console: switching to colour dummy device 80x25
<6> [246.869726] [IGT] kms_force_connector_basic: executing
<7> [247.110947] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [247.111896] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [247.112444] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [247.113368] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:77:VGA-1] force updated from 0 to 0 or reprobing
<7> [247.113381] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [247.113390] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [247.113739] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [247.114082] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [247.114556] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [247.114870] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [247.115323] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [247.115649] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [247.115657] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [247.116018] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [247.117366] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [247.117375] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [247.117700] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [247.118025] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<7> [247.118116] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [247.118125] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [247.118449] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [247.118783] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [247.119245] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [247.119656] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [247.120118] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [247.120431] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [247.120442] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [247.120724] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [247.122033] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [247.122042] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [247.122321] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [247.122652] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<7> [247.122820] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [247.122828] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [247.123110] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [247.123383] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [247.123874] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [247.124178] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [247.124663] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [247.124953] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [247.124959] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [247.125257] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [247.126597] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [247.126605] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [247.126894] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [247.127170] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<6> [247.128141] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [247.128765] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:77:VGA-1] force updated from 0 to 2 or reprobing
<7> [247.128778] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [247.128787] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] status updated from disconnected to connected
<7> [247.128951] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [247.129087] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [247.128998] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [247.129344] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [247.129994] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [247.130439] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [247.130464] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [247.130907] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [247.132767] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [247.132794] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [247.133383] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] probed modes:
<7> [247.133970] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [247.133988] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [247.134000] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [247.134010] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [247.134021] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [247.134124] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [247.134347] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [247.134833] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [247.135547] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [247.135985] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [247.136011] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [247.136467] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [247.138162] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [247.138186] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [247.138852] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] probed modes:
<7> [247.138865] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [247.138876] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [247.138886] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [247.138895] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [247.138903] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [247.139376] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:77:VGA-1] EDID override set
<7> [247.139461] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [247.139552] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:77:VGA-1] ELD monitor IGT
<7> [247.139563] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:77:VGA-1] ELD size 24, SAD count 0
<7> [247.139871] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [247.139892] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [247.139912] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] probed modes:
<7> [247.139921] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [247.139931] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [247.139941] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [247.139951] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [247.139960] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [247.139970] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [247.140283] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:77:VGA-1] EDID override set
<7> [247.140344] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [247.140446] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:77:VGA-1] ELD monitor IGT
<7> [247.140458] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:77:VGA-1] ELD size 24, SAD count 0
<7> [247.140468] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:77:VGA-1] EDID changed, epoch counter 56
<7> [247.140761] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [247.140781] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] probed modes:
<7> [247.140789] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [247.140799] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [247.140809] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [247.140819] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [247.140829] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [247.141139] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:77:VGA-1] EDID override reset
<7> [247.141203] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [247.141422] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [247.141852] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [247.142423] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [247.142853] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [247.142874] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [247.143269] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [247.145016] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [247.145036] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [247.145616] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [247.145641] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [247.145661] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] probed modes:
<7> [247.145671] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [247.145682] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [247.145692] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [247.145710] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [247.145719] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [247.146178] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:77:VGA-1] force updated from 2 to 0 or reprobing
<7> [247.146191] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [247.146202] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [247.146854] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [247.147262] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [247.147870] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [247.148265] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [247.148901] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [247.149203] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [247.149211] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [247.149533] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [247.151246] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [247.151279] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [247.152259] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [247.153348] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] status updated from connected to disconnected
<7> [247.153438] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [247.153591] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [247.153613] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<7> [247.153625] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:77:VGA-1] EDID changed, epoch counter 58
<7> [247.153782] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [247.153795] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [247.154245] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [247.154701] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [247.155351] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [247.155802] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [247.156390] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [247.156851] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [247.156862] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [247.157289] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [247.159050] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [247.159064] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [247.159538] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [247.160011] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<6> [247.161521] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [247.162465] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [247.163645] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:73:LVDS-1] force updated from 0 to 0 or reprobing
<7> [247.163661] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1]
<7> [247.163681] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD monitor
<7> [247.163693] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD size 20, SAD count 0
<7> [247.163841] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1] probed modes:
<7> [247.163852] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [247.163923] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1]
<7> [247.163937] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD monitor
<7> [247.163954] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD size 20, SAD count 0
<7> [247.164064] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1] probed modes:
<7> [247.164074] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [247.164392] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:73:LVDS-1] EDID override reset
<7> [247.164459] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1]
<7> [247.164480] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD monitor
<7> [247.164489] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD size 20, SAD count 0
<7> [247.164600] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1] probed modes:
<7> [247.164609] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [247.165018] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:77:VGA-1] force updated from 0 to 0 or reprobing
<7> [247.165029] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [247.165039] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [247.165516] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [247.165938] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [247.166521] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [247.166931] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [247.167493] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [247.167910] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [247.167921] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [247.168333] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [247.170332] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [247.170344] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [247.170795] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [247.171216] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<7> [247.171333] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [247.171345] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [247.171825] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [247.172234] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [247.172866] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [247.173268] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [247.173953] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [247.174241] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [247.174248] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [247.174551] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [247.175812] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [247.175819] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [247.176116] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [247.176469] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<7> [247.176731] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:77:VGA-1] EDID override reset
<7> [247.176766] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [247.176774] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [247.177080] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [247.177384] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [247.177868] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [247.178151] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [247.178611] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [247.178897] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [247.178903] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [247.179174] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [247.180513] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [247.180521] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [247.180802] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [247.181104] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<7> [247.181445] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:80:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [247.181459] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1]
<7> [247.181470] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:80:HDMI-A-1]
<7> [247.233417] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [247.249442] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [247.249454] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [247.249753] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [247.265450] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [247.265461] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [247.265740] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1] disconnected
<7> [247.265828] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1]
<7> [247.265836] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:80:HDMI-A-1]
<7> [247.317465] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [247.333459] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [247.333469] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [247.333730] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [247.349434] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [247.349442] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [247.349725] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1] disconnected
<7> [247.350612] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:80:HDMI-A-1] EDID override reset
<7> [247.350665] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1]
<7> [247.350675] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:80:HDMI-A-1]
<7> [247.402474] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [247.419444] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [247.419458] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [247.419772] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [247.435435] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [247.435444] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [247.435725] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1] disconnected
<7> [247.436069] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:88:DP-1] EDID override reset
<7> [247.436108] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:88:DP-1]
<7> [247.436116] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:88:DP-1]
<7> [247.440527] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:88:DP-1] disconnected
<7> [247.441027] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:93:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [247.441041] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2]
<7> [247.441053] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:93:HDMI-A-2]
<7> [247.441725] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [247.442173] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [247.442844] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [247.443292] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [247.443303] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [247.443745] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [247.445533] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [247.445545] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [247.445972] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2] disconnected
<7> [247.446071] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2]
<7> [247.446083] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:93:HDMI-A-2]
<7> [247.446745] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [247.447139] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [247.447742] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [247.448130] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [247.448139] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [247.448578] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [247.450244] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [247.450255] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [247.450706] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2] disconnected
<7> [247.451036] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:93:HDMI-A-2] EDID override reset
<7> [247.451086] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2]
<7> [247.451097] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:93:HDMI-A-2]
<7> [247.451766] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [247.452156] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [247.452794] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [247.453225] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [247.453234] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [247.453705] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [247.455331] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [247.455341] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [247.455874] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2] disconnected
<7> [247.456381] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:97:HDMI-A-3] force updated from 0 to 0 or reprobing
<7> [247.456394] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3]
<7> [247.456424] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:97:HDMI-A-3]
<7> [247.457019] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [247.457432] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [247.458008] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [247.458436] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [247.458446] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [247.458847] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [247.460649] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [247.460665] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [247.461150] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3] disconnected
<7> [247.461273] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3]
<7> [247.461286] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:97:HDMI-A-3]
<7> [247.461953] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [247.462375] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [247.463071] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [247.463515] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [247.463522] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [247.463855] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [247.465525] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [247.465537] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [247.465931] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3] disconnected
<7> [247.466275] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:97:HDMI-A-3] EDID override reset
<7> [247.466327] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3]
<7> [247.466339] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:97:HDMI-A-3]
<7> [247.466971] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [247.467359] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [247.467988] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [247.468273] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [247.468281] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [247.468607] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [247.469909] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [247.469917] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [247.470230] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3] disconnected
<7> [247.470506] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:101:DP-2] EDID override reset
<7> [247.470560] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:101:DP-2]
<7> [247.470572] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:101:DP-2]
<7> [247.474931] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:101:DP-2] disconnected
<7> [247.475138] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:105:DP-3] EDID override reset
<7> [247.475170] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:DP-3]
<7> [247.475178] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:105:DP-3]
<7> [247.479541] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:DP-3] disconnected
<6> [247.481370] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [247.482108] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [247.493146] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [247.493176] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [247.493630] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1]
<7> [247.493653] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD monitor
<7> [247.493664] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD size 20, SAD count 0
<7> [247.493781] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1] probed modes:
<7> [247.493789] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [247.493796] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [247.493803] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [247.494126] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [247.494454] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [247.495030] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [247.496130] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [247.497575] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [247.498014] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [247.498025] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [247.498469] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [247.500275] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [247.500288] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [247.500745] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [247.501176] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<7> [247.501194] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1]
<7> [247.501206] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:80:HDMI-A-1]
<7> [247.553469] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [247.569462] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [247.569477] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [247.569779] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [247.585453] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [247.585463] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [247.585746] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1] disconnected
<7> [247.585756] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:88:DP-1]
<7> [247.585764] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:88:DP-1]
<7> [247.590096] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:88:DP-1] disconnected
<7> [247.590114] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2]
<7> [247.590125] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:93:HDMI-A-2]
<7> [247.590785] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [247.591188] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [247.591804] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [247.592104] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [247.592111] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [247.592392] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [247.593763] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [247.593772] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [247.594052] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2] disconnected
<7> [247.594062] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3]
<7> [247.594069] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:97:HDMI-A-3]
<7> [247.594535] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [247.594822] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [247.595288] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [247.595733] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [247.595744] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [247.596133] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [247.597917] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [247.597930] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [247.598326] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3] disconnected
<7> [247.598341] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:101:DP-2]
<7> [247.598352] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:101:DP-2]
<7> [247.602966] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:101:DP-2] disconnected
<7> [247.602988] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:DP-3]
<7> [247.602999] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:105:DP-3]
<7> [247.607565] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:DP-3] disconnected
<7> [247.607579] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:73:LVDS-1] enabled? yes
<7> [247.607589] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:77:VGA-1] enabled? no
<7> [247.607595] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:80:HDMI-A-1] enabled? no
<7> [247.607601] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:88:DP-1] enabled? no
<7> [247.607607] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:93:HDMI-A-2] enabled? no
<7> [247.607612] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:97:HDMI-A-3] enabled? no
<7> [247.607617] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:101:DP-2] enabled? no
<7> [247.607623] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:105:DP-3] enabled? no
<7> [247.607662] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [247.607688] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:73:LVDS-1] found preferred mode: 1366x768
<7> [247.607695] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1366x768 config
<7> [247.607726] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:53:pipe A] desired mode 1366x768 set (0,0)
<7> [247.609461] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [247.626895] Console: switching to colour frame buffer device 170x48
Created at 2026-05-16 00:33:58