Results for igt@kms_force_connector_basic@force-edid

Result: Pass

git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.29 seconds
Igt-Version 
IGT-Version: 2.4-g044f2c874 (x86_64) (Linux: 7.1.0-rc2-CI_DRM_18417-g835de80ce9b3+ x86_64)
Out 
Using IGT_SRANDOM=1778077513 for randomisation
Opened device: /dev/dri/card0
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.291s)
Err 
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.291s)
Dmesg
<6> [175.488778] Console: switching to colour dummy device 80x25
<6> [175.489210] [IGT] kms_force_connector_basic: executing
<7> [175.501620] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [175.502884] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [175.516171] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [175.517399] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:529:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [175.517407] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [175.517413] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [175.521640] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [175.521667] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [175.521670] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [175.525900] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [175.525934] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [175.525937] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [175.530165] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<6> [175.530351] [IGT] kms_force_connector_basic: starting subtest force-edid
<7> [175.530630] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:529:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [175.530634] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [175.530637] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [175.589845] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [175.595587] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [175.595605] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [175.595909] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [175.601495] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [175.601503] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [175.601729] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] status updated from disconnected to connected
<7> [175.601782] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] probed modes:
<7> [175.601785] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [175.601789] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [175.601792] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [175.601794] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [175.601797] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [175.601824] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [175.601905] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [175.601943] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [175.601948] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [175.661841] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [175.667473] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [175.667484] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [175.667697] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [175.673138] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [175.673143] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [175.673315] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] probed modes:
<7> [175.673319] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [175.673323] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [175.673326] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [175.673330] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [175.673334] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [175.673612] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:529:HDMI-A-1] EDID override set
<7> [175.673628] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [175.673632] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [175.673924] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:529:HDMI-A-1] ELD monitor IGT
<7> [175.673928] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:529:HDMI-A-1] ELD size 24, SAD count 0
<7> [175.734846] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [175.740483] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [175.740617] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [175.740631] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [175.740638] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] probed modes:
<7> [175.740642] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [175.740646] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [175.740649] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [175.740653] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [175.740657] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [175.740747] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:529:HDMI-A-1] EDID override reset
<7> [175.740922] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [175.740926] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [175.801841] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [175.807502] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [175.807508] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [175.807648] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [175.813063] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [175.813068] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [175.813197] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:529:HDMI-A-1] EDID changed, epoch counter 2
<7> [175.813243] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [175.813253] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [175.813261] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] probed modes:
<7> [175.813265] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [175.813269] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [175.813272] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [175.813275] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [175.813279] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [175.813402] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:529:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [175.813405] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [175.813409] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [175.817597] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] status updated from connected to disconnected
<7> [175.817605] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [175.817635] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [175.817638] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [175.817808] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [175.818092] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [175.821891] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<6> [175.822097] [IGT] kms_force_connector_basic: finished subtest force-edid, SUCCESS
<7> [175.822487] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [175.823565] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:508:eDP-1] force updated from 0 to 0 or reprobing
<7> [175.823570] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [175.823574] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:508:eDP-1]
<7> [175.824467] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [175.824892] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [175.825034] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [175.825171] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [175.825324] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 60 Hz
<7> [175.825329] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [175.825332] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [175.825335] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [175.825348] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] VRR capable: yes
<7> [175.825484] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [175.825617] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [175.826092] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [175.826096] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2400": 60 596200 3840 3888 3920 4000 2400 2403 2408 2484 0x48 0xa
<7> [175.826119] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [175.826123] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:508:eDP-1]
<7> [175.826679] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [175.827082] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [175.827219] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [175.827352] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [175.827496] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 60 Hz
<7> [175.827499] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [175.827502] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [175.827505] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [175.827515] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] VRR capable: yes
<7> [175.827646] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [175.827778] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [175.828235] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [175.828238] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2400": 60 596200 3840 3888 3920 4000 2400 2403 2408 2484 0x48 0xa
<7> [175.828313] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:508:eDP-1] EDID override reset
<7> [175.828325] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [175.828328] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:508:eDP-1]
<7> [175.828878] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [175.829278] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [175.829413] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [175.829543] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [175.829686] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 60 Hz
<7> [175.829690] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [175.829692] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [175.829695] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [175.829706] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] VRR capable: yes
<7> [175.829846] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [175.829981] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [175.830416] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [175.830419] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2400": 60 596200 3840 3888 3920 4000 2400 2403 2408 2484 0x48 0xa
<7> [175.830494] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:517:DP-1] EDID override reset
<7> [175.830507] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:DP-1]
<7> [175.830510] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:517:DP-1]
<7> [175.834737] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:DP-1] disconnected
<7> [175.834850] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:529:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [175.834854] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [175.834857] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [175.839060] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [175.839080] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [175.839083] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [175.843309] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [175.843373] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:529:HDMI-A-1] EDID override reset
<7> [175.843384] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [175.843387] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [175.847652] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [175.847965] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:535:DP-2] EDID override reset
<7> [175.848008] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2]
<7> [175.848019] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:535:DP-2]
<7> [175.848730] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2] disconnected
<7> [175.848966] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:544:DP-3] EDID override reset
<7> [175.849004] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:DP-3]
<7> [175.849013] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:544:DP-3]
<7> [175.849693] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:DP-3] disconnected
<7> [175.849835] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:553:DP-4] EDID override reset
<7> [175.849857] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:553:DP-4]
<7> [175.849863] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:553:DP-4]
<7> [175.850300] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:553:DP-4] disconnected
<7> [175.850413] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:562:DP-5] EDID override reset
<7> [175.850433] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:562:DP-5]
<7> [175.850439] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:562:DP-5]
<7> [175.850842] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:562:DP-5] disconnected
<6> [175.851247] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [175.851710] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [175.898071] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [175.898085] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [175.898211] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [175.898223] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:508:eDP-1]
<7> [175.899899] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [175.900574] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [175.900940] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [175.901158] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [175.901453] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 60 Hz
<7> [175.901460] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [175.901464] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [175.901469] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [175.901488] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] VRR capable: yes
<7> [175.901694] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [175.901956] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [175.903034] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [175.903048] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2400": 60 596200 3840 3888 3920 4000 2400 2403 2408 2484 0x48 0xa
<7> [175.903061] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:DP-1]
<7> [175.903072] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:517:DP-1]
<7> [175.907621] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:DP-1] disconnected
<7> [175.907627] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [175.907630] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [175.911878] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [175.911882] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2]
<7> [175.911885] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:535:DP-2]
<7> [175.912136] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2] disconnected
<7> [175.912139] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:DP-3]
<7> [175.912142] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:544:DP-3]
<7> [175.912386] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:DP-3] disconnected
<7> [175.912390] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:553:DP-4]
<7> [175.912392] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:553:DP-4]
<7> [175.912653] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:553:DP-4] disconnected
<7> [175.912656] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:562:DP-5]
<7> [175.912658] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:562:DP-5]
<7> [175.912917] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:562:DP-5] disconnected
<7> [175.912920] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:eDP-1] enabled? yes
<7> [175.912924] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:517:DP-1] enabled? no
<7> [175.912927] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:529:HDMI-A-1] enabled? no
<7> [175.912929] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:535:DP-2] enabled? no
<7> [175.912931] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:544:DP-3] enabled? no
<7> [175.912933] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:553:DP-4] enabled? no
<7> [175.912935] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:562:DP-5] enabled? no
<7> [175.912961] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [175.912973] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:eDP-1] found preferred mode: 3840x2400
<7> [175.912975] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3840x2400 config
<7> [175.912992] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 3840x2400 set (0,0)
<7> [175.914690] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [175.931441] Console: switching to colour frame buffer device 240x75
Created at 2026-05-06 20:00:36