igt@i915_pm_rpm@gem-execbuf-stress on shard-rkl@IGT

Detail	Value
Duration	55.09 seconds
Hostname	shard-rkl-3
Igt-Version	IGT-Version: 2.4-g02b0e01dd (x86_64) (Linux: 7.1.0-rc1-CI_DRM_18377-ga53aafc879e9+ x86_64)
Out	Using IGT_SRANDOM=1777462979 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff8881230dd7b8 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] transcoder_ddi_func_is_enabled+0xa7/0xf0 [i915] hsw_get_pipe_config+0x280/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x730 [i915] intel_atomic_commit_tail+0x1744/0x20c0 [i915] intel_atomic_commit+0x2ff/0x350 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x548/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 Starting subtest: gem-execbuf-stress Starting dynamic subtest: smem0 Dynamic subtest smem0: SUCCESS (2.550s) Starting dynamic subtest: extra-wait-smem0 Dynamic subtest extra-wait-smem0: SUCCESS (52.529s) Subtest gem-execbuf-stress: SUCCESS (55.086s)
Err	Starting subtest: gem-execbuf-stress Starting dynamic subtest: smem0 Dynamic subtest smem0: SUCCESS (2.550s) Starting dynamic subtest: extra-wait-smem0 Dynamic subtest extra-wait-smem0: SUCCESS (52.529s) Subtest gem-execbuf-stress: SUCCESS (55.086s)
Dmesg	<6> [278.481023] Console: switching to colour dummy device 80x25 <6> [278.481732] [IGT] i915_pm_rpm: executing <7> [278.484312] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [278.484760] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] <7> [278.484768] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [278.488998] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected <7> [278.489048] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] <7> [278.489054] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [278.514730] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [278.514739] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [278.514742] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [278.514745] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [278.514954] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [278.515079] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [278.515379] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [278.515506] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [278.515873] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH) <7> [278.515880] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [278.515885] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [278.515891] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] probed modes: <7> [278.515895] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [278.515898] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5 <7> [278.515901] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa <7> [278.515904] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa <7> [278.515907] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa <7> [278.515909] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa <7> [278.515912] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa <7> [278.515915] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [278.515918] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 <7> [278.515921] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [278.515924] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [278.515926] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6 <7> [278.515929] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa <7> [278.515932] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [278.515935] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 <7> [278.515938] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [278.515941] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [278.515944] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [278.515946] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 <7> [278.515949] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [278.515952] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [278.515955] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [278.515957] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6 <7> [278.515960] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa <7> [278.515963] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 <7> [278.515966] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [278.515968] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa <7> [278.515971] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [278.515974] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [278.515977] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [278.515979] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 <7> [278.516026] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] <7> [278.516029] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [278.520235] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected <7> [278.520269] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] <7> [278.520272] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [278.524462] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected <7> [278.529149] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] <7> [278.529155] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [278.533384] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected <7> [278.533757] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] <7> [278.533761] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [278.537978] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected <7> [278.538222] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] <7> [278.538225] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [278.542416] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected <7> [278.542656] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] <7> [278.542659] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [278.546845] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected <7> [278.546857] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] <7> [278.546860] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [278.572519] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [278.572528] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [278.572531] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [278.572534] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [278.572736] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [278.572862] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [278.573158] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [278.573283] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [278.573663] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH) <7> [278.573670] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [278.573676] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [278.573682] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] probed modes: <7> [278.573685] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [278.573688] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5 <7> [278.573691] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa <7> [278.573694] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa <7> [278.573696] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa <7> [278.573699] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa <7> [278.573702] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa <7> [278.573705] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [278.573708] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 <7> [278.573711] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [278.573714] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [278.573716] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6 <7> [278.573719] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa <7> [278.573722] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [278.573725] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 <7> [278.573728] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [278.573731] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [278.573733] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [278.573736] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 <7> [278.573739] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [278.573742] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [278.573744] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [278.573747] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6 <7> [278.573750] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa <7> [278.573753] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 <7> [278.573756] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [278.573758] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa <7> [278.573761] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [278.573764] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [278.573767] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [278.573770] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 <7> [278.573793] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] <7> [278.573796] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [278.577990] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected <7> [278.578003] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] <7> [278.578005] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [278.582211] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected <7> [278.582550] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:418] <7> [279.598102] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A] <7> [279.598397] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [279.599143] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [279.599811] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [279.600435] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [279.601103] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000) <7> [279.601759] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [279.602370] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0) <7> [279.602623] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2360, found 0) <7> [279.602755] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0) <7> [279.602889] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2360, found 0) <7> [279.603026] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0) <7> [279.603162] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2096, found 0) <7> [279.603295] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0) <7> [279.603429] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0) <7> [279.603571] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0) <7> [279.603704] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0) <7> [279.603837] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0) <7> [279.603970] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0) <7> [279.604102] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0) <7> [279.604234] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2360, found 0) <7> [279.604366] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0) <7> [279.604501] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2360, found 0) <7> [279.604640] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0) <7> [279.604777] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2096, found 0) <7> [279.604912] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0) <7> [279.605045] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0) <7> [279.605179] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0) <7> [279.605313] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0) <7> [279.605447] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0) <7> [279.605588] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0) <7> [279.605720] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [279.605851] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0) <7> [279.605982] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0) <7> [279.606115] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [279.606245] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 139929, found 0) <7> [279.606377] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 139929, found 0) <7> [279.606513] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 139929, found 0) <7> [279.606645] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [279.606776] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:151:pipe A] releasing DPLL 0 <7> [279.606932] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no <7> [279.607064] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [279.607216] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 2016) -> ( 0 - 0), size 2016 -> 0 <7> [279.607348] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb (2016 - 2048) -> ( 0 - 0), size 32 -> 0 <7> [279.607480] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [279.607632] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [279.607762] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [279.607892] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [279.608037] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0 <7> [279.608174] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0 <7> [279.608308] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [279.608457] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 69965 kHz -> 0 kHz <7> [279.608619] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 8746 kHz -> 0 kHz <7> [279.608754] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: no [modeset] <7> [279.608890] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no <7> [279.609022] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7> [279.609155] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7> [279.609287] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7> [279.609418] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7> [279.609558] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no <7> [279.613101] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [279.633665] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_TC1 <7> [279.634141] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A] <7> [279.634642] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [279.635062] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:35:plane 1A] <7> [279.635472] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI B/PHY B] <7> [279.635957] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:399:DDI TC1/PHY C] <7> [279.636448] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DDI TC2/PHY D] <7> [279.636926] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST A] <7> [279.637364] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST B] <7> [279.637828] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DP-MST C] <7> [279.638282] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:400:HDMI-A-2] <7> [279.638886] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [279.639313] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [279.639748] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A] <7> [279.640666] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B] <7> [279.640974] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C] <7> [279.740796] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [279.741501] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [279.742219] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <6> [279.743372] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0 <4> [279.743400] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [279.743413] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [279.743424] nvme 0000:01:00.0: [ 0] RxErr (First) <7> [279.744026] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [279.744720] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [279.748203] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [279.749548] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [279.749794] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [279.750077] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [279.750212] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [279.750380] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [279.845156] [IGT] i915_pm_rpm: starting subtest gem-execbuf-stress <6> [279.847198] [IGT] i915_pm_rpm: starting dynamic subtest smem0 <7> [279.848749] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [279.864086] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [279.864735] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [279.865335] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [279.866003] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [279.867380] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [279.868167] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [279.868960] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [279.869632] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [279.870292] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [279.871799] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [279.872371] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [279.873686] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [279.875486] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [279.876015] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [279.886216] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [279.886613] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [279.886788] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [279.891351] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [279.900284] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A] <7> [279.923362] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [279.923374] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [279.923378] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [279.923382] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [279.923600] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [279.924608] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [279.924937] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [279.925086] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [279.925119] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [279.929399] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [279.934374] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [279.935424] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [279.936978] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B] <7> [279.937101] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C] <7> [280.004855] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [280.005515] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [280.006173] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [280.007946] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [280.008588] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [280.014447] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [280.015940] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [280.016660] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [280.017401] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [280.018005] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [280.018646] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [280.050085] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [280.050520] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [280.051264] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [280.051921] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [280.052680] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [280.053413] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [280.054174] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [280.054912] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [280.055629] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [280.058004] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [280.058648] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [280.059387] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [280.061411] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [280.062033] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [280.073902] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [280.074336] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [280.074701] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [280.075842] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [280.079234] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [280.110402] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [280.110413] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [280.110417] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [280.110420] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [280.110642] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [280.110831] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [280.111203] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [280.111393] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [280.111436] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [280.116107] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [280.181757] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [280.182439] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [280.189650] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [280.191153] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [280.191920] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [280.192742] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [280.193309] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [280.194003] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [280.292351] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [280.292856] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [280.293529] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [280.294273] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [280.295039] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [280.295795] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [280.296553] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [280.297506] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [280.298183] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [280.298429] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [280.298620] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [280.299188] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [280.299886] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [280.300042] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [280.306246] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [280.306354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [280.306632] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [280.308742] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [280.311282] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [280.342183] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [280.342194] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [280.342198] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [280.342201] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [280.342402] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [280.342534] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [280.343325] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [280.343456] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [280.343479] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [280.348115] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [280.412897] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [280.413583] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [280.419573] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [280.420944] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [280.421222] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [280.421506] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [280.421663] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [280.421844] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [280.524387] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [280.524848] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [280.525464] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [280.526139] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [280.526857] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [280.527594] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [280.528359] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [280.529100] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [280.529817] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [280.530551] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [280.531230] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [280.532307] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [280.533001] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [280.533160] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [280.540557] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [280.540734] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [280.541132] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [280.541967] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [280.545674] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [280.576473] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [280.576484] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [280.576487] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [280.576491] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [280.576701] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [280.576829] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [280.577142] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [280.577271] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [280.577294] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [280.582524] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [280.644902] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [280.645202] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [280.652117] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [280.653580] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [280.654400] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [280.655230] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [280.655835] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [280.656455] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [280.756609] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [280.757149] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [280.757872] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [280.758555] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <6> [280.759489] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0 <4> [280.759516] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [280.759528] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [280.759540] nvme 0000:01:00.0: [ 0] RxErr (First) <7> [280.759380] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [280.760154] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [280.760900] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [280.761631] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [280.762389] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [280.763215] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [280.763874] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [280.764619] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [280.766913] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [280.767544] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [280.779303] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [280.779576] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [280.780686] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [280.782925] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [280.785405] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [280.829979] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [280.829990] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [280.829994] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [280.829997] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [280.830203] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [280.831257] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [280.831590] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [280.832478] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [280.832502] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [280.837284] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [280.885077] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [280.886472] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [280.893647] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [280.895533] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [280.896615] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [280.897459] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [280.898235] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [280.899231] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [280.997904] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [280.998325] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [280.999063] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [280.999776] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [281.000510] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <6> [281.001096] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0 <4> [281.001113] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [281.001120] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [281.001128] nvme 0000:01:00.0: [ 0] RxErr (First) <7> [281.001288] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [281.002035] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [281.002782] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [281.003473] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [281.004283] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [281.004942] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [281.005840] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [281.006517] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [281.006654] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [281.014053] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [281.014251] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [281.014726] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [281.015339] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [281.019309] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [281.064700] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [281.064710] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [281.064714] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [281.064717] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [281.065928] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [281.066057] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [281.067144] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [281.067275] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [281.067298] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [281.072031] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [281.125167] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [281.125908] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [281.133030] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [281.134888] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [281.135918] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [281.136959] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [281.137530] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [281.138300] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [281.232314] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [281.232789] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [281.233469] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [281.234222] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [281.234980] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [281.235736] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [281.236453] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [281.237220] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [281.237926] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [281.238663] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [281.239336] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [281.240091] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [281.242195] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [281.242783] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [281.253077] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [281.253305] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [281.253881] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [281.254947] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [281.258676] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [281.300484] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [281.300494] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [281.300498] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [281.300501] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [281.301695] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [281.301849] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [281.302160] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [281.303066] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [281.303089] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [281.307850] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [281.365104] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [281.365841] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [281.372940] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [281.374337] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [281.374643] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [281.374970] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [281.375109] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [281.375289] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [281.471972] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [281.472356] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [281.473045] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [281.473718] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [281.474501] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [281.475268] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [281.476104] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [281.476951] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [281.477609] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [281.477958] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [281.478131] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [281.478396] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [281.479080] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [281.479248] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [281.485447] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [281.485550] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [281.486044] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [281.489280] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [281.490600] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [281.521439] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [281.521450] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [281.521454] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [281.521457] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [281.521661] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [281.522585] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [281.522897] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [281.523030] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [281.523054] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [281.527510] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [281.597035] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [281.597728] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [281.604967] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [281.606835] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [281.607838] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [281.608589] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [281.609365] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [281.610342] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [281.704933] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [281.705318] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [281.705985] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [281.706697] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [281.707512] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [281.708362] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [281.709129] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [281.709928] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [281.710610] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [281.711427] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [281.711619] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [281.711915] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [281.712588] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [281.712726] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [281.721369] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [281.721544] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [281.722060] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [281.723078] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [281.726668] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [281.756541] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [281.756551] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [281.756555] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [281.756558] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [281.756786] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [281.756935] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [281.757251] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [281.757381] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [281.757404] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [281.762311] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [281.828942] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [281.829630] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [281.836839] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [281.838652] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <6> [281.839598] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0 <4> [281.839615] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [281.839623] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [281.839630] nvme 0000:01:00.0: [ 0] RxErr (First) <7> [281.839717] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [281.840600] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [281.841418] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [281.842473] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [281.938659] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [281.939179] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [281.939891] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [281.940884] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [281.941947] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [281.943020] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [281.943919] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [281.944682] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [281.945453] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [281.946536] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [281.947544] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [281.948697] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [281.951228] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [281.952198] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [281.963979] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [281.964139] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [281.964512] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [281.965180] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [281.970215] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [282.015746] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [282.015756] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [282.015760] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [282.015763] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [282.016995] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [282.017186] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [282.018217] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [282.018392] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [282.018415] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [282.023119] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [282.069124] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [282.069323] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [282.076160] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [282.077563] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [282.077987] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [282.078331] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [282.078472] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [282.078648] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [282.179006] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [282.179432] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [282.180190] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [282.181004] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [282.181835] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [282.182628] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [282.183398] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [282.184221] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [282.184487] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [282.184736] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [282.184901] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [282.185179] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [282.185861] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [282.186007] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [282.193380] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [282.193482] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [282.193753] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [282.194351] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [282.198338] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [282.229240] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [282.229251] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [282.229254] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [282.229258] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [282.229468] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [282.229598] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [282.229916] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [282.230067] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [282.230091] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [282.235268] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [282.301041] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [282.301737] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [282.310166] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [282.312052] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [282.313095] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [282.314222] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [282.315223] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [282.316157] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [282.398678] [IGT] i915_pm_rpm: finished subtest smem0, SUCCESS <6> [282.400895] [IGT] i915_pm_rpm: starting dynamic subtest extra-wait-smem0 <7> [282.401440] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [282.413972] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [282.414073] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [282.414220] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [282.414395] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [282.414622] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [282.414844] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [282.415047] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [282.415259] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [282.415595] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [282.416172] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [282.416400] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [282.416937] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [282.417973] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [282.418225] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [282.428164] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [282.428294] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [282.428530] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [282.433118] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [282.433305] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A] <7> [282.465162] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [282.465174] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [282.465178] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [282.465182] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [282.465397] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [282.465546] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [282.465887] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [282.466035] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [282.466068] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [282.471196] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [282.477315] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [282.478422] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [282.479856] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B] <7> [282.479963] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C] <7> [282.541157] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [282.541613] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [282.542059] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [282.543865] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [282.544789] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [282.552317] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [282.554217] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [282.555289] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [282.556313] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [282.557074] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [282.557857] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [282.593025] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [282.593413] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [282.594078] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [282.594709] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [282.595445] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [282.596217] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [282.596944] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [282.597648] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [282.598368] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [282.599083] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [282.599722] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [282.600539] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [282.602740] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [282.603393] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [282.613748] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [282.614024] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [282.614859] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [282.615750] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [282.619440] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [282.649767] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [282.649777] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [282.649781] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [282.649784] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [282.650145] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [282.650276] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [282.650589] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [282.650718] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [282.650741] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [282.655028] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [282.725056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [282.725748] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [282.733060] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [282.734935] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [282.735982] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [282.737078] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [282.737931] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [282.738969] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [287.832660] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [287.833177] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [287.833883] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [287.834579] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [287.835347] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [287.836114] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [287.836859] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [287.837571] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [287.838134] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [287.838387] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [287.838523] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [287.838773] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [287.839493] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [287.839629] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [287.849466] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [287.849640] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [287.850113] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [287.851114] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [287.854715] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [287.884613] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [287.884623] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [287.884627] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [287.884630] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [287.885415] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [287.885548] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [287.885858] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [287.885988] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [287.886011] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [287.890340] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [287.957057] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [287.957947] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <6> [287.959920] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0 <4> [287.959939] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [287.959947] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [287.959955] nvme 0000:01:00.0: [ 0] RxErr (First) <7> [287.963934] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [287.965295] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [287.965533] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [287.965831] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [287.965970] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [287.966145] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [289.949316] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [289.963176] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [289.963869] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [289.964580] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [289.965373] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [289.966178] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [289.967004] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [289.967767] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [289.968469] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [289.968675] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [289.969146] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [289.969284] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [289.969646] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [289.970335] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [289.970473] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [289.977866] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [289.978022] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [289.982832] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [290.013521] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [290.013532] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [290.013535] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [290.013541] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [290.014711] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [290.014854] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [290.015163] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [290.015293] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [290.015316] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [290.019570] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [290.025049] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [290.029528] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [290.061490] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [290.061499] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [290.061503] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [290.061506] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [290.062675] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [290.062809] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [290.063121] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [290.063251] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [290.063273] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [290.067543] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [290.072421] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [290.072595] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [290.076062] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [290.077406] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [290.077736] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [290.078095] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [290.078237] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [290.078416] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [293.067307] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [293.067730] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [293.068448] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [293.069126] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [293.069906] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [293.070680] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [293.071408] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [293.072115] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [293.072845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [293.073208] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [293.073344] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [293.073608] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [293.074286] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [293.074424] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [293.081823] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [293.081923] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [293.082203] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [293.083100] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [293.086750] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [293.117485] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [293.117496] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [293.117500] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [293.117503] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [293.117709] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [293.117838] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [293.118147] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [293.118289] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [293.118312] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [293.123506] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [293.188549] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [293.189291] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [293.195213] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [293.196740] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [293.197482] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [293.198270] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [293.198841] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [293.199541] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [298.297931] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [298.298428] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [298.299097] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [298.299840] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [298.300608] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [298.301375] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [298.302088] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [298.302856] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [298.303482] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [298.303732] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [298.303863] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [298.304112] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [298.304809] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [298.304947] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [298.311092] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [298.311208] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [298.311477] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [298.313582] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [298.316081] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [298.346017] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [298.346027] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [298.346031] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [298.346034] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [298.346239] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [298.346368] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [298.346682] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [298.346812] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [298.346835] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [298.351778] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [298.419602] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [298.420342] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [298.426235] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [298.427616] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [298.427864] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [298.428158] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [298.428303] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [298.428532] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [300.186892] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [300.198898] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [300.199319] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [300.200058] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [300.200816] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [300.201552] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [300.202360] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [300.203126] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [300.203868] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [300.204558] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [300.205118] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [300.205268] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [300.205657] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [300.206377] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [300.206517] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [300.211535] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [300.211630] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [300.216407] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [300.261841] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [300.261851] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [300.261855] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [300.261858] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [300.263073] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [300.263209] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [300.264292] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [300.264429] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [300.264452] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [300.269188] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [300.274074] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [300.278932] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [300.324361] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [300.324370] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [300.324373] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [300.324377] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [300.325603] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [300.325744] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [300.326840] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [300.326970] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [300.326991] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [300.331698] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [300.336585] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [300.336794] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [300.340210] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [300.341596] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [300.341852] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [300.342138] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [300.342280] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [300.342453] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [300.443166] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0 <4> [300.443186] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [300.443193] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [300.443200] nvme 0000:01:00.0: [ 0] RxErr (First) <7> [303.529031] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [303.529447] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [303.530200] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [303.531208] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [303.532280] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [303.533359] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [303.533741] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [303.533963] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [303.534141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [303.534384] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [303.534522] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [303.534772] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [303.535456] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [303.535593] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [303.541751] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [303.541879] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [303.542156] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [303.544226] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [303.546732] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [303.576297] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [303.576309] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [303.576312] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [303.576316] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [303.576533] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [303.576666] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [303.576985] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [303.577185] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [303.577227] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [303.582310] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [303.658200] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [303.658941] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [303.664872] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [303.666202] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [303.666436] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [303.666721] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [303.666875] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [303.667057] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [308.789003] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [308.789496] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [308.790164] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [308.790907] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [308.791681] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [308.792500] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [308.793208] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [308.793975] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [308.794715] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [308.794968] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [308.795101] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [308.795421] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [308.796766] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [308.797416] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [308.807753] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [308.807977] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [308.808512] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [308.809438] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [308.813136] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [308.842943] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [308.842953] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [308.842957] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [308.842961] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [308.843167] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [308.843755] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [308.844093] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [308.844221] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [308.844256] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [308.848707] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [308.920447] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [308.921269] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [308.928400] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [308.929803] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [308.930051] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [308.930349] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [308.930525] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [308.930702] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [309.510151] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0 <4> [309.510173] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [309.510182] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [309.510190] nvme 0000:01:00.0: [ 0] RxErr (First) <7> [310.423932] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [310.436847] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [310.437261] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [310.437968] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [310.438659] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [310.439445] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [310.440214] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [310.440967] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [310.441693] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [310.442431] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [310.443045] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [310.443200] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [310.443479] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [310.444200] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [310.444339] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [310.449354] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [310.449447] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [310.454217] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [310.484562] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [310.484571] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [310.484575] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [310.484578] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [310.485014] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [310.485146] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [310.485459] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [310.485589] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [310.485612] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [310.489915] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [310.495966] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [310.500883] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [310.532930] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [310.532938] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [310.532942] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [310.532945] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [310.533149] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [310.533269] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [310.533574] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [310.533701] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [310.533721] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [310.538979] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [310.543872] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [310.544025] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [310.547476] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [310.548825] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [310.549100] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [310.549385] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [310.549526] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [310.549712] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [314.024730] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [314.025154] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [314.025892] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [314.026604] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [314.027332] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [314.028111] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [314.028853] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [314.029577] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [314.030147] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [314.030399] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [314.030533] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [314.030875] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [314.031555] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [314.031692] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [314.039061] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [314.039283] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [314.039725] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [314.040369] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [314.044307] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [314.073866] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [314.073877] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [314.073880] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [314.073884] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [314.074097] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [314.074226] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [314.074548] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [314.074677] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [314.074700] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [314.080028] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [314.150962] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [314.151707] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [314.157590] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [314.158985] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [314.159233] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [314.159527] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [314.159673] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [314.159905] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [319.254727] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [319.255260] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [319.255978] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [319.256794] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [319.257589] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [319.258393] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [319.259218] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [319.259962] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [319.260281] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [319.260526] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [319.260666] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [319.261013] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [319.261691] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [319.261857] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [319.269294] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [319.269429] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [319.269765] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [319.269921] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [319.274334] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [319.304260] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [319.304271] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [319.304274] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [319.304277] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [319.304488] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [319.304613] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [319.305158] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [319.305287] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [319.305310] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [319.309916] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [319.381178] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [319.382005] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [319.387910] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [319.389292] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [319.389539] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [319.389830] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [319.389968] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [319.390140] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [320.660509] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [320.673389] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [320.673805] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [320.674513] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [320.675202] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [320.675994] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [320.676787] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [320.677539] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [320.678285] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [320.678998] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [320.679247] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [320.679386] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [320.679670] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [320.680354] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [320.680492] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [320.685509] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [320.685606] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [320.690375] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [320.722438] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [320.722447] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [320.722451] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [320.722454] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [320.722666] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [320.722790] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [320.723093] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [320.723223] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [320.723562] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [320.728529] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [320.733427] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [320.738246] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [320.767979] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [320.767989] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [320.767992] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [320.767996] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [320.768219] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [320.768345] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [320.768648] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [320.768775] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [320.768796] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [320.773754] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [320.778613] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [320.778802] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [320.782256] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [320.783611] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [320.783859] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [320.784143] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [320.784298] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [320.784478] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [324.485956] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [324.486394] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [324.487110] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [324.487831] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [324.488684] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [324.489501] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [324.490325] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [324.490876] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [324.491056] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [324.491309] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [324.491444] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [324.491700] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [324.492384] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [324.492523] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [324.498698] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [324.498797] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [324.499132] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [324.500053] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [324.503626] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [324.533914] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [324.533924] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [324.533928] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [324.533931] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [324.534143] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [324.534271] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [324.534570] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [324.534697] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [324.534720] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [324.539299] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [324.603080] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [324.603775] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [324.608578] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [324.609906] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [324.610161] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [324.610445] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [324.610584] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [324.610756] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [329.713829] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [329.714354] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [329.715070] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [329.715752] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [329.716533] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [329.717299] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [329.718035] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [329.718735] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [329.719386] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [329.719640] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [329.719774] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [329.720078] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [329.720748] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [329.720883] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [329.727098] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [329.727198] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [329.727488] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [329.728404] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [329.733178] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [329.762797] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [329.762808] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [329.762812] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [329.762815] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [329.763992] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [329.764125] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [329.764438] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [329.764568] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [329.764591] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [329.768870] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [329.833276] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [329.834022] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [329.839930] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <6> [329.840066] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0 <4> [329.840073] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [329.840076] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [329.840078] nvme 0000:01:00.0: [ 0] RxErr (First) <7> [329.841304] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [329.841569] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [329.841859] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [329.841996] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [329.842170] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [330.896734] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [330.909621] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [330.910037] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [330.910754] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [330.911442] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [330.912237] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [330.913017] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [330.913781] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [330.914524] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [330.915168] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [330.915425] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [330.915572] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [330.915832] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [330.916522] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [330.916660] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [330.922794] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [330.922888] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [330.927777] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [330.957371] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [330.957384] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [330.957388] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [330.957391] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [330.958532] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [330.958700] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [330.959018] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [330.959149] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [330.959174] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [330.963414] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [330.968320] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [330.973172] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [331.004073] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [331.004083] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [331.004086] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [331.004090] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [331.004301] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [331.004431] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [331.004732] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [331.004861] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [331.004884] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [331.009857] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [331.014736] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [331.014905] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [331.019595] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [331.020963] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [331.021231] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [331.021527] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [331.021667] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [331.021846] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [334.931596] [IGT] i915_pm_rpm: finished subtest extra-wait-smem0, SUCCESS <6> [334.933681] [IGT] i915_pm_rpm: finished subtest gem-execbuf-stress, SUCCESS <7> [334.936089] i915 0000:00:02.0: [drm:compute_baseline_pipe_bpp [i915]] [CONNECTOR:400:HDMI-A-2] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [334.936278] i915 0000:00:02.0: [drm:intel_hdmi_compute_output_format [i915]] picking 8 bpc for HDMI output (pipe bpp: 24) <7> [334.936417] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [334.936563] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:399:DDI TC1/PHY C] [CRTC:151:pipe A] <7> [334.936702] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [334.936846] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [334.937017] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [334.937157] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [334.937294] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040) <7> [334.937429] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [334.937563] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920) <7> [334.937697] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2360) <7> [334.937832] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920) <7> [334.937973] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2360) <7> [334.938107] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008) <7> [334.938240] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2096) <7> [334.938373] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080) <7> [334.938504] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080) <7> [334.938637] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084) <7> [334.938769] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089) <7> [334.938901] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125) <7> [334.939045] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125) <7> [334.939177] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920) <7> [334.939313] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2360) <7> [334.939451] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920) <7> [334.939585] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2360) <7> [334.939720] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008) <7> [334.939854] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2096) <7> [334.939997] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080) <7> [334.940131] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080) <7> [334.940264] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084) <7> [334.940396] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089) <7> [334.940528] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125) <7> [334.940661] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125) <7> [334.940794] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [334.940958] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1) <7> [334.941090] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4) <7> [334.941222] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [334.941354] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 139929) <7> [334.941485] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 139929) <7> [334.941616] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 0, found 139929) <7> [334.941747] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [334.941908] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no <7> [334.942054] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1 <7> [334.942189] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 2016), size 0 -> 2016 <7> [334.942323] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (2016 - 2048), size 0 -> 32 <7> [334.942455] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [334.942586] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 <7> [334.942715] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 <7> [334.942845] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 <7> [334.942997] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 559716 num active planes 1 <7> [334.943133] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 560 <7> [334.943268] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [334.943416] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 0 kHz -> 69965 kHz <7> [334.943565] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 8746 kHz <7> [334.943699] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:151:pipe A] allocated DPLL 0 <7> [334.943837] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:151:pipe A] reserving DPLL 0 <7> [334.943986] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: yes [modeset] <7> [334.944122] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [334.944256] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7> [334.944390] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [334.944523] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [334.944657] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [334.944790] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [334.944930] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7> [334.945064] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2 <7> [334.945200] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [334.945336] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 42, guardband: 44 vsync start: 0, vsync end: 0 <7> [334.945474] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1125, vmax vtotal: 1125 <7> [334.945608] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [334.945743] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [334.945876] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [334.946132] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [334.946265] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 53 139929 1920 2008 2096 2360 1080 1084 1089 1125 0x40 0x5 <7> [334.946398] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [334.946529] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 139929, pixel rate 139929, min cdclk 69965, min voltage level 0 <7> [334.946660] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 135, ips linetime: 0 <7> [334.946792] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0 <7> [334.946950] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 1920x1080+0+0 <7> [334.947087] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [334.947221] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [334.947356] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [334.947489] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [334.947623] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [334.947756] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [334.947904] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [334.948048] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [334.948179] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [334.948311] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [334.948442] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [334.948578] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [334.948716] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [334.948850] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [334.948992] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [334.949126] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [334.949259] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:416] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [334.949394] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [334.949526] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [334.949661] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7> [334.949791] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7> [334.949927] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7> [334.950057] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7> [334.950186] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no <7> [334.962055] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [334.962214] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [334.962366] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [334.962554] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [334.962788] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [334.963031] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [334.963234] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [334.963435] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [334.963618] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [334.963862] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [334.964012] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [334.964532] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [334.965236] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [334.965380] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [334.971539] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [334.971918] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [334.972085] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [334.972803] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [334.974211] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [334.974361] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI B/PHY B] <7> [334.974499] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:399:DDI TC1/PHY C] <7> [334.974635] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DDI TC2/PHY D] <7> [334.974778] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST A] <7> [334.974921] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST B] <7> [334.975056] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DP-MST C] <7> [334.975235] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3 <7> [334.975464] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A] <7> [334.975604] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [334.975800] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_TC1 <7> [334.975989] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [334.976785] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1 <7> [334.976932] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:35:plane 1A] <7> [334.996229] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:400:HDMI-A-2] <7> [334.996652] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A] <7> [334.998854] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [334.999167] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <6> [335.000325] [IGT] i915_pm_rpm: exiting, ret=0 <7> [335.004047] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [335.029925] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [335.029935] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [335.029938] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [335.029955] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [335.030162] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [335.030290] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [335.030591] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [335.030720] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <6> [335.033938] Console: switching to colour frame buffer device 240x67 <7> [335.033905] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [335.038122] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [278.484760] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]

<7> [278.484768] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [278.488998] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected

<7> [278.489048] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2]

<7> [278.489054] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [278.514730] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [278.514739] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [278.514742] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [278.514745] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [278.514954] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [278.515079] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [278.515379] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [278.515506] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [278.515873] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH)

<7> [278.515880] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [278.515885] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [278.515891] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] probed modes:

<7> [278.515895] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [278.515898] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5

<7> [278.515901] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa

<7> [278.515904] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa

<7> [278.515907] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa

<7> [278.515909] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa

<7> [278.515912] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa

<7> [278.515915] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [278.515918] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6

<7> [278.515921] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [278.515924] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [278.515926] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6

<7> [278.515929] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa

<7> [278.515932] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [278.515935] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5

<7> [278.515938] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [278.515941] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [278.515944] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [278.515946] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5

<7> [278.515949] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [278.515952] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [278.515955] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [278.515957] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6

<7> [278.515960] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa

<7> [278.515963] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5

<7> [278.515966] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [278.515968] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa

<7> [278.515971] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [278.515974] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [278.515977] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [278.515979] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6

<7> [278.516026] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1]

<7> [278.516029] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [278.520235] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected

<7> [278.520269] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3]

<7> [278.520272] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [278.524462] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected

<7> [278.529149] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]

<7> [278.529155] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [278.533384] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected

<7> [278.533757] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1]

<7> [278.533761] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [278.537978] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected

<7> [278.538222] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3]

<7> [278.538225] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [278.542416] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected

<7> [278.542656] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]

<7> [278.542659] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [278.546845] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected

<7> [278.546857] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2]

<7> [278.546860] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [278.572519] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [278.572528] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [278.572531] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [278.572534] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [278.572736] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [278.572862] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [278.573158] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [278.573283] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [278.573663] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH)

<7> [278.573670] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [278.573676] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [278.573682] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] probed modes:

<7> [278.573685] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [278.573688] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5

<7> [278.573691] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa

<7> [278.573694] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa

<7> [278.573696] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa

<7> [278.573699] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa

<7> [278.573702] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa

<7> [278.573705] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [278.573708] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6

<7> [278.573711] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [278.573714] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [278.573716] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6

<7> [278.573719] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa

<7> [278.573722] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [278.573725] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5

<7> [278.573728] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [278.573731] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [278.573733] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [278.573736] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5

<7> [278.573739] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [278.573742] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [278.573744] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [278.573747] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6

<7> [278.573750] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa

<7> [278.573753] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5

<7> [278.573756] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [278.573758] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa

<7> [278.573761] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [278.573764] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [278.573767] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [278.573770] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6

<7> [278.573793] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1]

<7> [278.573796] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [278.577990] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected

<7> [278.578003] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3]

<7> [278.578005] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [278.582211] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected

<7> [279.598102] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A]

<7> [279.598397] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [279.599143] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [279.599811] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [279.600435] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [279.601103] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000)

<7> [279.601759] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [279.602370] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)

<7> [279.602623] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2360, found 0)

<7> [279.602755] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)

<7> [279.602889] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2360, found 0)

<7> [279.603026] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0)

<7> [279.603162] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2096, found 0)

<7> [279.603295] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)

<7> [279.603429] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)

<7> [279.603571] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0)

<7> [279.603704] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0)

<7> [279.603837] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0)

<7> [279.603970] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0)

<7> [279.604102] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)

<7> [279.604234] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2360, found 0)

<7> [279.604366] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)

<7> [279.604501] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2360, found 0)

<7> [279.604640] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0)

<7> [279.604777] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2096, found 0)

<7> [279.604912] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)

<7> [279.605045] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)

<7> [279.605179] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0)

<7> [279.605313] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0)

<7> [279.605447] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0)

<7> [279.605588] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0)

<7> [279.605720] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [279.605851] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)

<7> [279.605982] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)

<7> [279.606115] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [279.606245] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 139929, found 0)

<7> [279.606377] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 139929, found 0)

<7> [279.606513] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 139929, found 0)

<7> [279.606645] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [279.606776] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:151:pipe A] releasing DPLL 0

<7> [279.606932] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no

<7> [279.607064] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [279.607216] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 2016) -> ( 0 - 0), size 2016 -> 0

<7> [279.607348] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb (2016 - 2048) -> ( 0 - 0), size 32 -> 0

<7> [279.607480] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [279.607632] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [279.607762] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [279.607892] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [279.608037] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0

<7> [279.608174] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0

<7> [279.608308] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [279.608457] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 69965 kHz -> 0 kHz

<7> [279.608619] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 8746 kHz -> 0 kHz

<7> [279.608754] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: no [modeset]

<7> [279.608890] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no

<7> [279.609022] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no

<7> [279.609155] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no

<7> [279.609287] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no

<7> [279.609418] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no

<7> [279.609558] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no

<7> [279.613101] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [279.633665] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_TC1

<7> [279.634141] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A]

<7> [279.634642] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [279.635062] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:35:plane 1A]

<7> [279.635472] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI B/PHY B]

<7> [279.635957] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:399:DDI TC1/PHY C]

<7> [279.636448] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DDI TC2/PHY D]

<7> [279.636926] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST A]

<7> [279.637364] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST B]

<7> [279.637828] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DP-MST C]

<7> [279.638282] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [279.638886] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [279.639313] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [279.639748] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A]

<7> [279.640666] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B]

<7> [279.640974] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C]

<7> [279.740796] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [279.741501] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [279.742219] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<6> [279.743372] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0

<4> [279.743400] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [279.743413] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [279.744026] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [279.744720] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [279.748203] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [279.749548] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [279.749794] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [279.750077] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [279.750212] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [279.750380] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [279.845156] [IGT] i915_pm_rpm: starting subtest gem-execbuf-stress

<7> [279.864086] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [279.864735] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [279.865335] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [279.866003] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [279.867380] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [279.868167] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [279.868960] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [279.869632] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [279.870292] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [279.871799] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [279.872371] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [279.873686] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [279.875486] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [279.876015] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [279.886216] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [279.886613] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [279.886788] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [279.891351] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [279.900284] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A]

<7> [279.923362] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [279.923374] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [279.923378] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [279.923382] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [279.923600] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [279.924608] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [279.924937] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [279.925086] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [279.925119] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [279.929399] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [279.934374] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [279.935424] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [279.936978] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B]

<7> [279.937101] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C]

<7> [280.004855] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [280.005515] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [280.006173] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [280.007946] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [280.008588] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [280.014447] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [280.015940] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [280.016660] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [280.017401] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [280.018005] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [280.018646] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [280.050085] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [280.050520] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [280.051264] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [280.051921] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [280.052680] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [280.053413] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [280.054174] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [280.054912] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [280.055629] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [280.058004] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [280.058648] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [280.059387] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [280.061411] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [280.062033] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [280.073902] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [280.074336] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [280.074701] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [280.075842] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [280.079234] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [280.110402] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [280.110413] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [280.110417] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [280.110420] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [280.110642] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [280.110831] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [280.111203] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [280.111393] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [280.111436] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [280.116107] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [280.181757] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [280.182439] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [280.189650] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [280.191153] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [280.191920] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [280.192742] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [280.193309] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [280.194003] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [280.292351] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [280.292856] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [280.293529] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [280.294273] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [280.295039] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [280.295795] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [280.296553] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [280.297506] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [280.298183] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [280.298429] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [280.298620] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [280.299188] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [280.299886] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [280.300042] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [280.306246] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [280.306354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [280.306632] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [280.308742] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [280.311282] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [280.342183] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [280.342194] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [280.342198] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [280.342201] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [280.342402] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [280.342534] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [280.343325] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [280.343456] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [280.343479] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [280.348115] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [280.412897] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [280.413583] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [280.419573] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [280.420944] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [280.421222] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [280.421506] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [280.421663] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [280.421844] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [280.524387] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [280.524848] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [280.525464] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [280.526139] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [280.526857] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [280.527594] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [280.528359] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [280.529100] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [280.529817] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [280.530551] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [280.531230] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [280.532307] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [280.533001] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [280.533160] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [280.540557] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [280.540734] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [280.541132] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [280.541967] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [280.545674] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [280.576473] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [280.576484] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [280.576487] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [280.576491] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [280.576701] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [280.576829] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [280.577142] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [280.577271] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [280.577294] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [280.582524] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [280.644902] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [280.645202] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [280.652117] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [280.653580] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [280.654400] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [280.655230] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [280.655835] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [280.656455] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [280.756609] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [280.757149] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [280.757872] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [280.758555] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<6> [280.759489] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0

<4> [280.759516] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [280.759528] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [280.759380] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [280.760154] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [280.760900] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [280.761631] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [280.762389] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [280.763215] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [280.763874] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [280.764619] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [280.766913] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [280.767544] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [280.779303] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [280.779576] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [280.780686] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [280.782925] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [280.785405] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [280.829979] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [280.829990] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [280.829994] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [280.829997] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [280.830203] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [280.831257] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [280.831590] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [280.832478] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [280.832502] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [280.837284] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [280.885077] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [280.886472] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [280.893647] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [280.895533] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [280.896615] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [280.897459] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [280.898235] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [280.899231] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [280.997904] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [280.998325] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [280.999063] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [280.999776] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [281.000510] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<6> [281.001096] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0

<4> [281.001113] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [281.001120] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [281.001288] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [281.002035] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [281.002782] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [281.003473] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [281.004283] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [281.004942] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [281.005840] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [281.006517] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [281.006654] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [281.014053] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [281.014251] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [281.014726] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [281.015339] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [281.019309] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [281.064700] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [281.064710] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [281.064714] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [281.064717] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [281.065928] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [281.066057] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [281.067144] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [281.067275] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [281.067298] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [281.072031] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [281.125167] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [281.125908] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [281.133030] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [281.134888] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [281.135918] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [281.136959] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [281.137530] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [281.138300] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [281.232314] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [281.232789] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [281.233469] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [281.234222] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [281.234980] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [281.235736] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [281.236453] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [281.237220] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [281.237926] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [281.238663] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [281.239336] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [281.240091] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [281.242195] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [281.242783] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [281.253077] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [281.253305] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [281.253881] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [281.254947] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [281.258676] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [281.300484] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [281.300494] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [281.300498] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [281.300501] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [281.301695] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [281.301849] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [281.302160] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [281.303066] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [281.303089] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [281.307850] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [281.365104] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [281.365841] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [281.372940] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [281.374337] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [281.374643] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [281.374970] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [281.375109] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [281.375289] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [281.471972] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [281.472356] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [281.473045] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [281.473718] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [281.474501] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [281.475268] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [281.476104] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [281.476951] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [281.477609] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [281.477958] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [281.478131] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [281.478396] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [281.479080] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [281.479248] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [281.485447] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [281.485550] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [281.486044] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [281.489280] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [281.490600] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [281.521439] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [281.521450] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [281.521454] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [281.521457] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [281.521661] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [281.522585] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [281.522897] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [281.523030] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [281.523054] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [281.527510] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [281.597035] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [281.597728] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [281.604967] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [281.606835] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [281.607838] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [281.608589] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [281.609365] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [281.610342] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [281.704933] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [281.705318] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [281.705985] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [281.706697] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [281.707512] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [281.708362] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [281.709129] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [281.709928] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [281.710610] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [281.711427] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [281.711619] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [281.711915] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [281.712588] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [281.712726] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [281.721369] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [281.721544] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [281.722060] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [281.723078] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [281.726668] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [281.756541] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [281.756551] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [281.756555] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [281.756558] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [281.756786] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [281.756935] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [281.757251] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [281.757381] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [281.757404] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [281.762311] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [281.828942] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [281.829630] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [281.836839] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [281.838652] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<6> [281.839598] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0

<4> [281.839615] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [281.839623] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [281.839717] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [281.840600] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [281.841418] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [281.842473] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [281.938659] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [281.939179] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [281.939891] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [281.940884] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [281.941947] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [281.943020] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [281.943919] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [281.944682] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [281.945453] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [281.946536] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [281.947544] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [281.948697] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [281.951228] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [281.952198] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [281.963979] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [281.964139] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [281.964512] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [281.965180] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [281.970215] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [282.015746] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [282.015756] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [282.015760] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [282.015763] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [282.016995] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [282.017186] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [282.018217] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [282.018392] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [282.018415] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [282.023119] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [282.069124] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [282.069323] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [282.076160] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [282.077563] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [282.077987] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [282.078331] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [282.078472] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [282.078648] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [282.179006] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [282.179432] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [282.180190] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [282.181004] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [282.181835] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [282.182628] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [282.183398] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [282.184221] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [282.184487] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [282.184736] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [282.184901] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [282.185179] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [282.185861] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [282.186007] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [282.193380] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [282.193482] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [282.193753] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [282.194351] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [282.198338] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [282.229240] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [282.229251] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [282.229254] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [282.229258] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [282.229468] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [282.229598] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [282.229916] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [282.230067] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [282.230091] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [282.235268] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [282.301041] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [282.301737] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [282.310166] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [282.312052] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [282.313095] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [282.314222] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [282.315223] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [282.316157] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [282.400895] [IGT] i915_pm_rpm: starting dynamic subtest extra-wait-smem0

<7> [282.413972] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [282.414073] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [282.414220] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [282.414395] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [282.414622] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [282.414844] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [282.415047] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [282.415259] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [282.415595] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [282.416172] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [282.416400] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [282.416937] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [282.417973] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [282.418225] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [282.428164] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [282.428294] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [282.428530] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [282.433118] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [282.433305] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A]

<7> [282.465162] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [282.465174] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [282.465178] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [282.465182] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [282.465397] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [282.465546] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [282.465887] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [282.466035] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [282.466068] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [282.471196] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [282.477315] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [282.478422] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [282.479856] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B]

<7> [282.479963] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C]

<7> [282.541157] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [282.541613] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [282.542059] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [282.543865] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [282.544789] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [282.552317] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [282.554217] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [282.555289] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [282.556313] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [282.557074] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [282.557857] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [282.593025] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [282.593413] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [282.594078] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [282.594709] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [282.595445] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [282.596217] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [282.596944] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [282.597648] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [282.598368] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [282.599083] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [282.599722] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [282.600539] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [282.602740] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [282.603393] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [282.613748] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [282.614024] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [282.614859] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [282.615750] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [282.619440] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [282.649767] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [282.649777] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [282.649781] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [282.649784] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [282.650145] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [282.650276] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [282.650589] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [282.650718] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [282.650741] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [282.655028] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [282.725056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [282.725748] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [282.733060] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [282.734935] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [282.735982] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [282.737078] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [282.737931] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [282.738969] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [287.832660] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [287.833177] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [287.833883] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [287.834579] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [287.835347] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [287.836114] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [287.836859] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [287.837571] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [287.838134] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [287.838387] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [287.838523] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [287.838773] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [287.839493] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [287.839629] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [287.849466] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [287.849640] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [287.850113] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [287.851114] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [287.854715] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [287.884613] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [287.884623] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [287.884627] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [287.884630] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [287.885415] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [287.885548] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [287.885858] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [287.885988] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [287.886011] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [287.890340] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [287.957057] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [287.957947] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<6> [287.959920] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0

<4> [287.959939] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [287.959947] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [287.963934] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [287.965295] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [287.965533] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [287.965831] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [287.965970] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [287.966145] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [289.949316] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [289.963176] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [289.963869] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [289.964580] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [289.965373] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [289.966178] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [289.967004] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [289.967767] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [289.968469] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [289.968675] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [289.969146] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [289.969284] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [289.969646] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [289.970335] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [289.970473] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [289.977866] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [289.978022] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [289.982832] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [290.013521] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [290.013532] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [290.013535] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [290.013541] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [290.014711] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [290.014854] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [290.015163] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [290.015293] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [290.015316] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [290.019570] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [290.025049] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [290.029528] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [290.061490] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [290.061499] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [290.061503] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [290.061506] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [290.062675] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [290.062809] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [290.063121] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [290.063251] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [290.063273] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [290.067543] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [290.072421] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [290.072595] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [290.076062] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [290.077406] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [290.077736] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [290.078095] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [290.078237] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [290.078416] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [293.067307] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [293.067730] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [293.068448] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [293.069126] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [293.069906] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [293.070680] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [293.071408] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [293.072115] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [293.072845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [293.073208] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [293.073344] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [293.073608] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [293.074286] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [293.074424] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [293.081823] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [293.081923] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [293.082203] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [293.083100] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [293.086750] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [293.117485] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [293.117496] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [293.117500] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [293.117503] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [293.117709] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [293.117838] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [293.118147] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [293.118289] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [293.118312] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [293.123506] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [293.188549] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [293.189291] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [293.195213] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [293.196740] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [293.197482] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [293.198270] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [293.198841] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [293.199541] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [298.297931] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [298.298428] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [298.299097] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [298.299840] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [298.300608] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [298.301375] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [298.302088] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [298.302856] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [298.303482] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [298.303732] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [298.303863] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [298.304112] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [298.304809] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [298.304947] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [298.311092] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [298.311208] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [298.311477] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [298.313582] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [298.316081] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [298.346017] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [298.346027] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [298.346031] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [298.346034] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [298.346239] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [298.346368] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [298.346682] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [298.346812] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [298.346835] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [298.351778] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [298.419602] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [298.420342] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [298.426235] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [298.427616] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [298.427864] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [298.428158] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [298.428303] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [298.428532] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [300.186892] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [300.198898] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [300.199319] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [300.200058] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [300.200816] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [300.201552] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [300.202360] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [300.203126] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [300.203868] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [300.204558] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [300.205118] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [300.205268] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [300.205657] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [300.206377] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [300.206517] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [300.211535] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [300.211630] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [300.216407] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [300.261841] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [300.261851] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [300.261855] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [300.261858] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [300.263073] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [300.263209] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [300.264292] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [300.264429] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [300.264452] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [300.269188] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [300.274074] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [300.278932] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [300.324361] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [300.324370] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [300.324373] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [300.324377] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [300.325603] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [300.325744] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [300.326840] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [300.326970] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [300.326991] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [300.331698] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [300.336585] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [300.336794] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [300.340210] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [300.341596] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [300.341852] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [300.342138] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [300.342280] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [300.342453] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [300.443166] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0

<4> [300.443186] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [300.443193] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [303.529031] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [303.529447] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [303.530200] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [303.531208] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [303.532280] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [303.533359] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [303.533741] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [303.533963] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [303.534141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [303.534384] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [303.534522] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [303.534772] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [303.535456] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [303.535593] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [303.541751] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [303.541879] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [303.542156] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [303.544226] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [303.546732] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [303.576297] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [303.576309] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [303.576312] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [303.576316] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [303.576533] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [303.576666] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [303.576985] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [303.577185] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [303.577227] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [303.582310] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [303.658200] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [303.658941] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [303.664872] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [303.666202] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [303.666436] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [303.666721] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [303.666875] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [303.667057] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [308.789003] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [308.789496] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [308.790164] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [308.790907] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [308.791681] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [308.792500] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [308.793208] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [308.793975] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [308.794715] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [308.794968] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [308.795101] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [308.795421] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [308.796766] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [308.797416] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [308.807753] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [308.807977] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [308.808512] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [308.809438] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [308.813136] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [308.842943] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [308.842953] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [308.842957] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [308.842961] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [308.843167] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [308.843755] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [308.844093] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [308.844221] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [308.844256] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [308.848707] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [308.920447] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [308.921269] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [308.928400] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [308.929803] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [308.930051] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [308.930349] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [308.930525] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [308.930702] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [309.510151] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0

<4> [309.510173] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [309.510182] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [310.423932] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [310.436847] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [310.437261] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [310.437968] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [310.438659] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [310.439445] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [310.440214] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [310.440967] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [310.441693] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [310.442431] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [310.443045] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [310.443200] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [310.443479] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [310.444200] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [310.444339] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [310.449354] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [310.449447] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [310.454217] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [310.484562] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [310.484571] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [310.484575] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [310.484578] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [310.485014] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [310.485146] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [310.485459] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [310.485589] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [310.485612] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [310.489915] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [310.495966] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [310.500883] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [310.532930] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [310.532938] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [310.532942] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [310.532945] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [310.533149] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [310.533269] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [310.533574] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [310.533701] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [310.533721] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [310.538979] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [310.543872] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [310.544025] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [310.547476] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [310.548825] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [310.549100] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [310.549385] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [310.549526] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [310.549712] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [314.024730] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [314.025154] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [314.025892] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [314.026604] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [314.027332] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [314.028111] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [314.028853] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [314.029577] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [314.030147] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [314.030399] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [314.030533] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [314.030875] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [314.031555] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [314.031692] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [314.039061] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [314.039283] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [314.039725] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [314.040369] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [314.044307] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [314.073866] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [314.073877] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [314.073880] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [314.073884] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [314.074097] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [314.074226] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [314.074548] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [314.074677] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [314.074700] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [314.080028] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [314.150962] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [314.151707] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [314.157590] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [314.158985] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [314.159233] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [314.159527] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [314.159673] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [314.159905] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [319.254727] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [319.255260] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [319.255978] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [319.256794] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [319.257589] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [319.258393] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [319.259218] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [319.259962] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [319.260281] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [319.260526] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [319.260666] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [319.261013] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [319.261691] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [319.261857] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [319.269294] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [319.269429] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [319.269765] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [319.269921] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [319.274334] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [319.304260] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [319.304271] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [319.304274] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [319.304277] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [319.304488] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [319.304613] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [319.305158] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [319.305287] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [319.305310] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [319.309916] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [319.381178] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [319.382005] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [319.387910] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [319.389292] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [319.389539] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [319.389830] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [319.389968] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [319.390140] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [320.660509] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [320.673389] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [320.673805] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [320.674513] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [320.675202] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [320.675994] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [320.676787] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [320.677539] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [320.678285] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [320.678998] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [320.679247] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [320.679386] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [320.679670] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [320.680354] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [320.680492] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [320.685509] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [320.685606] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [320.690375] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [320.722438] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [320.722447] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [320.722451] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [320.722454] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [320.722666] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [320.722790] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [320.723093] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [320.723223] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [320.723562] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [320.728529] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [320.733427] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [320.738246] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [320.767979] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [320.767989] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [320.767992] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [320.767996] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [320.768219] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [320.768345] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [320.768648] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [320.768775] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [320.768796] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [320.773754] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [320.778613] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [320.778802] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [320.782256] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [320.783611] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [320.783859] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [320.784143] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [320.784298] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [320.784478] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [324.485956] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [324.486394] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [324.487110] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [324.487831] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [324.488684] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [324.489501] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [324.490325] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [324.490876] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [324.491056] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [324.491309] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [324.491444] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [324.491700] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [324.492384] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [324.492523] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [324.498698] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [324.498797] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [324.499132] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [324.500053] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [324.503626] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [324.533914] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [324.533924] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [324.533928] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [324.533931] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [324.534143] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [324.534271] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [324.534570] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [324.534697] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [324.534720] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [324.539299] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [324.603080] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [324.603775] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [324.608578] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [324.609906] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [324.610161] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [324.610445] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [324.610584] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [324.610756] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [329.713829] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [329.714354] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [329.715070] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [329.715752] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [329.716533] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [329.717299] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [329.718035] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [329.718735] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [329.719386] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [329.719640] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [329.719774] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [329.720078] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [329.720748] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [329.720883] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [329.727098] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [329.727198] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [329.727488] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [329.728404] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [329.733178] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [329.762797] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [329.762808] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [329.762812] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [329.762815] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [329.763992] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [329.764125] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [329.764438] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [329.764568] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [329.764591] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [329.768870] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [329.833276] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [329.834022] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [329.839930] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<6> [329.840066] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0

<4> [329.840073] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [329.840076] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [329.841304] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [329.841569] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [329.841859] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [329.841996] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [329.842170] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [330.896734] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [330.909621] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [330.910037] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [330.910754] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [330.911442] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [330.912237] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [330.913017] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [330.913781] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [330.914524] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [330.915168] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [330.915425] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [330.915572] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [330.915832] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [330.916522] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [330.916660] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [330.922794] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [330.922888] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [330.927777] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [330.957371] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [330.957384] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [330.957388] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [330.957391] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [330.958532] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [330.958700] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [330.959018] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [330.959149] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [330.959174] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [330.963414] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [330.968320] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [330.973172] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [331.004073] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [331.004083] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [331.004086] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [331.004090] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [331.004301] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [331.004431] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [331.004732] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [331.004861] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [331.004884] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [331.009857] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [331.014736] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [331.014905] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [331.019595] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [331.020963] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [331.021231] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [331.021527] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [331.021667] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [331.021846] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [334.931596] [IGT] i915_pm_rpm: finished subtest extra-wait-smem0, SUCCESS

<6> [334.933681] [IGT] i915_pm_rpm: finished subtest gem-execbuf-stress, SUCCESS

<7> [334.936089] i915 0000:00:02.0: [drm:compute_baseline_pipe_bpp [i915]] [CONNECTOR:400:HDMI-A-2] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [334.936278] i915 0000:00:02.0: [drm:intel_hdmi_compute_output_format [i915]] picking 8 bpc for HDMI output (pipe bpp: 24)

<7> [334.936417] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [334.936563] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:399:DDI TC1/PHY C] [CRTC:151:pipe A]

<7> [334.936702] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [334.936846] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [334.937017] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [334.937157] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [334.937294] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040)

<7> [334.937429] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [334.937563] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)

<7> [334.937697] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2360)

<7> [334.937832] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)

<7> [334.937973] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2360)

<7> [334.938107] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008)

<7> [334.938240] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2096)

<7> [334.938373] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)

<7> [334.938504] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)

<7> [334.938637] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084)

<7> [334.938769] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089)

<7> [334.938901] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125)

<7> [334.939045] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125)

<7> [334.939177] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)

<7> [334.939313] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2360)

<7> [334.939451] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)

<7> [334.939585] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2360)

<7> [334.939720] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008)

<7> [334.939854] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2096)

<7> [334.939997] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)

<7> [334.940131] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)

<7> [334.940264] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084)

<7> [334.940396] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089)

<7> [334.940528] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125)

<7> [334.940661] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125)

<7> [334.940794] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [334.940958] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)

<7> [334.941090] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)

<7> [334.941222] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [334.941354] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 139929)

<7> [334.941485] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 139929)

<7> [334.941616] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 0, found 139929)

<7> [334.941747] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [334.941908] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no

<7> [334.942054] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1

<7> [334.942189] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 2016), size 0 -> 2016

<7> [334.942323] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (2016 - 2048), size 0 -> 32

<7> [334.942455] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [334.942586] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0

<7> [334.942715] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0

<7> [334.942845] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0

<7> [334.942997] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 559716 num active planes 1

<7> [334.943133] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 560

<7> [334.943268] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [334.943416] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 0 kHz -> 69965 kHz

<7> [334.943565] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 8746 kHz

<7> [334.943699] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:151:pipe A] allocated DPLL 0

<7> [334.943837] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:151:pipe A] reserving DPLL 0

<7> [334.943986] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: yes [modeset]

<7> [334.944122] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [334.944256] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0

<7> [334.944390] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [334.944523] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [334.944657] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [334.944790] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [334.944930] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0

<7> [334.945064] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2

<7> [334.945200] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [334.945336] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 42, guardband: 44 vsync start: 0, vsync end: 0

<7> [334.945474] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1125, vmax vtotal: 1125

<7> [334.945608] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [334.945743] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [334.945876] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [334.946132] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [334.946265] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 53 139929 1920 2008 2096 2360 1080 1084 1089 1125 0x40 0x5

<7> [334.946398] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [334.946529] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 139929, pixel rate 139929, min cdclk 69965, min voltage level 0

<7> [334.946660] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 135, ips linetime: 0

<7> [334.946792] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0

<7> [334.946950] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 1920x1080+0+0

<7> [334.947087] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [334.947221] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [334.947356] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [334.947489] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [334.947623] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [334.947756] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [334.947904] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [334.948048] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [334.948179] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [334.948311] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [334.948442] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [334.948578] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [334.948716] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [334.948850] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [334.948992] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [334.949126] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [334.949259] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:416] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [334.949394] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [334.949526] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [334.949661] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no

<7> [334.949791] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no

<7> [334.949927] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no

<7> [334.950057] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no

<7> [334.950186] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no

<7> [334.962055] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [334.962214] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [334.962366] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [334.962554] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [334.962788] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [334.963031] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [334.963234] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [334.963435] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [334.963618] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [334.963862] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [334.964012] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [334.964532] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [334.965236] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [334.965380] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [334.971539] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [334.971918] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [334.972085] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [334.972803] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [334.974211] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [334.974361] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI B/PHY B]

<7> [334.974499] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:399:DDI TC1/PHY C]

<7> [334.974635] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DDI TC2/PHY D]

<7> [334.974778] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST A]

<7> [334.974921] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST B]

<7> [334.975056] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DP-MST C]

<7> [334.975235] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3

<7> [334.975464] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A]

<7> [334.975604] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [334.975800] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_TC1

<7> [334.975989] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [334.976785] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1

<7> [334.976932] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:35:plane 1A]

<7> [334.996229] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [334.996652] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A]

<7> [334.998854] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [334.999167] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [335.004047] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [335.029925] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [335.029935] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [335.029938] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [335.029955] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [335.030162] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [335.030290] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [335.030591] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [335.030720] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<6> [335.033938] Console: switching to colour frame buffer device 240x67

<7> [335.033905] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [335.038122] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

Results for igt@i915_pm_rpm@gem-execbuf-stress