igt@i915_pm_rpm@gem-execbuf-stress on shard-rkl@IGT

Detail	Value
Duration	55.05 seconds
Hostname	shard-rkl-7
Igt-Version	IGT-Version: 2.4-gf69f699aa (x86_64) (Linux: 7.1.0-rc1-CI_DRM_18377-ga53aafc879e9+ x86_64)
Out	Using IGT_SRANDOM=1777454059 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff8881481417b8 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] transcoder_ddi_func_is_enabled+0xa7/0xf0 [i915] hsw_get_pipe_config+0x280/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x730 [i915] intel_atomic_commit_tail+0x1744/0x20c0 [i915] intel_atomic_commit+0x2ff/0x350 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x548/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 Starting subtest: gem-execbuf-stress Starting dynamic subtest: smem0 Dynamic subtest smem0: SUCCESS (2.536s) Starting dynamic subtest: extra-wait-smem0 Dynamic subtest extra-wait-smem0: SUCCESS (52.508s) Subtest gem-execbuf-stress: SUCCESS (55.049s)
Err	Starting subtest: gem-execbuf-stress Starting dynamic subtest: smem0 Dynamic subtest smem0: SUCCESS (2.536s) Starting dynamic subtest: extra-wait-smem0 Dynamic subtest extra-wait-smem0: SUCCESS (52.508s) Subtest gem-execbuf-stress: SUCCESS (55.049s)
Dmesg	<6> [187.327397] Console: switching to colour dummy device 80x25 <6> [187.327625] [IGT] i915_pm_rpm: executing <7> [187.329901] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [187.330352] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] <7> [187.330359] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [187.334548] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected <7> [187.334597] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] <7> [187.334603] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [187.360281] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [187.360290] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [187.360293] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [187.360296] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [187.360495] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [187.360619] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [187.360926] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [187.361057] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [187.361424] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH) <7> [187.361431] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [187.361437] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [187.361443] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] probed modes: <7> [187.361446] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [187.361449] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5 <7> [187.361452] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa <7> [187.361455] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa <7> [187.361457] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa <7> [187.361460] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa <7> [187.361463] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa <7> [187.361466] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [187.361469] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 <7> [187.361471] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [187.361474] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [187.361477] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6 <7> [187.361480] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa <7> [187.361483] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [187.361485] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 <7> [187.361488] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [187.361491] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [187.361494] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [187.361496] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 <7> [187.361499] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [187.361502] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [187.361505] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [187.361507] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6 <7> [187.361510] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa <7> [187.361513] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 <7> [187.361516] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [187.361519] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa <7> [187.361522] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [187.361524] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [187.361527] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [187.361530] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 <7> [187.361577] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] <7> [187.361581] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [187.365761] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected <7> [187.365795] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] <7> [187.365798] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [187.370003] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected <7> [187.374615] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] <7> [187.374621] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [187.378810] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected <7> [187.379184] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] <7> [187.379188] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [187.383363] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected <7> [187.383609] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] <7> [187.383613] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [187.387832] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected <7> [187.388066] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] <7> [187.388070] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [187.392273] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected <7> [187.392285] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] <7> [187.392288] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [187.417927] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [187.417936] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [187.417939] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [187.417942] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [187.418158] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [187.418283] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [187.418590] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [187.418716] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [187.419096] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH) <7> [187.419103] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [187.419108] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [187.419114] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] probed modes: <7> [187.419117] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [187.419120] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5 <7> [187.419123] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa <7> [187.419126] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa <7> [187.419129] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa <7> [187.419131] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa <7> [187.419134] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa <7> [187.419137] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [187.419140] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 <7> [187.419143] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [187.419145] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [187.419148] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6 <7> [187.419151] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa <7> [187.419154] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [187.419157] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 <7> [187.419159] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [187.419162] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [187.419165] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [187.419168] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 <7> [187.419170] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [187.419173] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [187.419176] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [187.419179] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6 <7> [187.419181] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa <7> [187.419184] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 <7> [187.419187] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [187.419190] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa <7> [187.419192] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [187.419195] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [187.419198] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [187.419201] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 <7> [187.419222] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] <7> [187.419226] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [187.423410] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected <7> [187.423422] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] <7> [187.423425] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [187.427605] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected <7> [187.427908] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:417] <7> [188.442766] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A] <7> [188.443068] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [188.443791] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [188.444428] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [188.445094] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [188.445649] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000) <7> [188.445793] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [188.445927] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0) <7> [188.446060] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2360, found 0) <7> [188.446192] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0) <7> [188.446325] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2360, found 0) <7> [188.446457] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0) <7> [188.446589] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2096, found 0) <7> [188.446728] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0) <7> [188.446861] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0) <7> [188.446992] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0) <7> [188.447124] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0) <7> [188.447256] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0) <7> [188.447387] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0) <7> [188.447521] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0) <7> [188.447653] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2360, found 0) <7> [188.447805] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0) <7> [188.447937] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2360, found 0) <7> [188.448069] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0) <7> [188.448201] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2096, found 0) <7> [188.448333] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0) <7> [188.448465] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0) <7> [188.448597] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0) <7> [188.448737] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0) <7> [188.448869] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0) <7> [188.449002] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0) <7> [188.449134] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [188.449267] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0) <7> [188.449399] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0) <7> [188.449531] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [188.449663] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 139929, found 0) <7> [188.449804] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 139929, found 0) <7> [188.449936] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 139929, found 0) <7> [188.450068] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [188.450201] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:151:pipe A] releasing DPLL 0 <7> [188.450360] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no <7> [188.450492] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [188.450643] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 2016) -> ( 0 - 0), size 2016 -> 0 <7> [188.450784] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb (2016 - 2048) -> ( 0 - 0), size 32 -> 0 <7> [188.450919] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [188.451051] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [188.451180] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [188.451312] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [188.451458] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0 <7> [188.451596] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0 <7> [188.451738] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [188.451887] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 69965 kHz -> 0 kHz <7> [188.452037] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 8746 kHz -> 0 kHz <7> [188.452174] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: no [modeset] <7> [188.452311] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no <7> [188.452445] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7> [188.452578] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7> [188.452721] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7> [188.452855] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7> [188.452989] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no <7> [188.464071] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [188.482867] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_TC1 <7> [188.483462] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A] <7> [188.484226] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [188.484871] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:35:plane 1A] <7> [188.485471] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI B/PHY B] <7> [188.486082] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:399:DDI TC1/PHY C] <7> [188.486695] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DDI TC2/PHY D] <7> [188.487306] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST A] <7> [188.487895] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST B] <7> [188.488465] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DP-MST C] <7> [188.489074] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:400:HDMI-A-2] <7> [188.489887] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [188.490432] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [188.490989] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A] <7> [188.492188] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B] <7> [188.492585] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C] <7> [188.594117] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.594842] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.595440] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.597213] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.597968] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.602556] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.603957] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [188.604191] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [188.604472] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [188.604609] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [188.604798] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [188.696432] [IGT] i915_pm_rpm: starting subtest gem-execbuf-stress <6> [188.697872] [IGT] i915_pm_rpm: starting dynamic subtest smem0 <7> [188.698393] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [188.714236] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.714919] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [188.715539] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [188.716221] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [188.716925] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [188.717611] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [188.719027] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [188.719707] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [188.720380] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [188.721914] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [188.722497] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [188.723803] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [188.725738] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.726226] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.737624] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.738032] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.738263] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [188.742753] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [188.755087] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A] <7> [188.771776] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [188.771787] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [188.771791] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [188.771795] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [188.772479] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [188.772625] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [188.773772] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [188.773922] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [188.773959] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [188.778457] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [188.783429] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.784461] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.785905] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B] <7> [188.786020] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C] <7> [188.858031] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.858749] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.859456] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.861248] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.861981] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.869084] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.870555] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [188.871332] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [188.872152] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [188.872753] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [188.873326] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.899221] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.899615] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [188.900288] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [188.900945] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [188.901625] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [188.902343] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [188.903033] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [188.903710] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [188.904350] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [188.906003] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [188.906562] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [188.907925] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [188.910045] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.910616] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.922341] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.922887] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.923105] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [188.924503] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [188.927669] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [188.960313] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [188.960324] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [188.960328] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [188.960331] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [188.960539] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [188.960668] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [188.961481] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [188.961618] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [188.961642] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [188.966187] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [189.033888] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.034587] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.041828] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.043639] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [189.044456] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [189.045413] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [189.046330] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [189.047206] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.140621] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.141117] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [189.141774] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [189.142647] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [189.143693] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [189.144462] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [189.145179] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [189.146114] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [189.147108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [189.148598] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [189.149473] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [189.151048] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [189.153203] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.153898] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.164262] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.164455] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.165563] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [189.165758] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [189.170195] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [189.201535] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [189.201546] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [189.201549] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [189.201553] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [189.201760] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [189.201889] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [189.202194] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [189.202323] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [189.202346] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [189.207227] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [189.273996] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.275390] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.281277] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.282699] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [189.282951] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [189.283235] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [189.283374] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [189.283546] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.380855] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.381245] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [189.381917] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [189.382546] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [189.383261] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [189.383954] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [189.384610] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [189.385321] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [189.385980] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [189.386681] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [189.386817] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [189.387077] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [189.387762] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.387900] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.394051] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.394155] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.394432] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [189.396059] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [189.399008] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [189.429624] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [189.429634] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [189.429638] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [189.429641] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [189.430799] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [189.430928] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [189.431246] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [189.431376] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [189.431399] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [189.435686] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [189.505900] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.506170] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.513051] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.514493] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [189.515257] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [189.516060] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [189.516636] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [189.517305] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.610854] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.611244] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [189.611902] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [189.612531] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [189.613252] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [189.613949] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [189.614674] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [189.615334] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [189.615995] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [189.616370] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [189.616505] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [189.616798] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [189.617486] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.617625] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.623783] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.623883] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.624153] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [189.624847] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [189.628748] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [189.660882] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [189.660892] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [189.660896] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [189.660900] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [189.661105] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [189.661229] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [189.661542] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [189.661974] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [189.661997] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [189.666926] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [189.730044] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.730786] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.737903] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.739430] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [189.740192] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [189.741003] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [189.741603] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [189.742288] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.838724] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.838843] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [189.838991] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [189.839166] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [189.839391] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [189.839599] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [189.839819] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [189.840086] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [189.840340] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [189.841001] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [189.841204] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [189.841588] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [189.842365] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.842564] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.848793] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.848947] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.849216] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [189.850716] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [189.853779] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [189.880505] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [189.880518] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [189.880521] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [189.880524] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [189.880750] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [189.880963] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [189.881332] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [189.881528] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [189.881575] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [189.886899] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [189.953888] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.954576] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.960536] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.962012] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [189.962755] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [189.963514] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [189.964153] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [189.965580] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.065597] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.066092] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [190.066744] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [190.067366] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [190.068106] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [190.068799] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [190.069453] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [190.070146] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [190.070791] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [190.071467] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [190.072095] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [190.072863] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [190.074940] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.075517] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.085882] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.086082] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.086680] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [190.086861] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [190.091458] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [190.137081] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [190.137092] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [190.137095] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [190.137098] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [190.137318] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [190.138422] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [190.138749] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [190.139647] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [190.139673] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [190.144454] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [190.193850] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.194329] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.201662] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.203058] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [190.203297] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [190.203580] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [190.203740] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [190.203926] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.305803] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.306184] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [190.306868] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [190.307794] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [190.308768] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [190.309763] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [190.310724] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [190.311266] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [190.311517] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [190.311826] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [190.312029] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [190.312365] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [190.313134] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.313334] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.320778] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.320913] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.321240] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [190.321361] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [190.325857] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [190.357817] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [190.357827] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [190.357831] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [190.357834] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [190.358044] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [190.358168] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [190.358480] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [190.358617] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [190.358876] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [190.365010] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [190.425783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.426329] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.432197] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.433663] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [190.434462] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [190.435314] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [190.435975] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [190.436592] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.537647] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.538035] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [190.538676] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [190.539388] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [190.540133] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [190.540926] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [190.541575] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [190.542285] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [190.543002] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [190.543661] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [190.544327] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [190.545114] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [190.547245] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.547867] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.558174] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.558398] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.558818] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [190.561140] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [190.563671] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [190.596871] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [190.596882] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [190.596886] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [190.596889] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [190.597098] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [190.597221] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [190.597530] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [190.597999] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [190.598023] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [190.602946] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [190.666771] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.667457] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.674659] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.676123] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [190.676858] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [190.677654] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [190.678225] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [190.678898] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.777776] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.778162] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [190.778831] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [190.779453] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [190.780170] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [190.780866] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [190.781521] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [190.782213] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [190.782870] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [190.783542] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [190.784174] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [190.784918] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [190.786986] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.787566] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.796717] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.796938] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.797494] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [190.798191] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [190.802194] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [190.832176] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [190.832185] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [190.832189] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [190.832192] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [190.832402] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [190.832525] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [190.833093] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [190.833223] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [190.833246] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [190.837847] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [190.906018] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.906780] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.913830] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.915305] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [190.916058] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [190.916861] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [190.917428] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [190.918132] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [191.013789] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [191.014176] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [191.014830] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [191.015469] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [191.016188] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [191.016888] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [191.017556] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [191.018272] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [191.018931] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [191.019253] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [191.019389] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [191.019654] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [191.020342] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [191.020480] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [191.026638] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [191.026738] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.027011] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [191.029125] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [191.031625] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [191.062271] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [191.062282] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [191.062285] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [191.062288] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [191.062500] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [191.063435] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [191.063746] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [191.063877] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [191.063900] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [191.068375] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [191.138028] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.138797] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [191.145839] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [191.147321] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [191.148061] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [191.148871] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [191.149437] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [191.150138] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [191.234432] [IGT] i915_pm_rpm: finished subtest smem0, SUCCESS <6> [191.235810] [IGT] i915_pm_rpm: starting dynamic subtest extra-wait-smem0 <7> [191.236229] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [191.250719] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [191.250875] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [191.251134] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [191.251420] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [191.251780] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [191.252100] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [191.252412] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [191.252795] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [191.253115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [191.253731] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [191.254003] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [191.254596] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [191.255735] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [191.256017] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [191.264772] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [191.264941] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.265262] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [191.271005] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [191.271857] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A] <7> [191.302302] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [191.302311] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [191.302315] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [191.302319] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [191.302525] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [191.303217] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [191.303566] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [191.303705] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [191.303730] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [191.308179] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [191.313116] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [191.314133] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [191.315546] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B] <7> [191.315662] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C] <7> [191.377918] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [191.378669] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [191.379515] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [191.381589] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.382479] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [191.389708] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [191.391501] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [191.392443] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [191.393168] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [191.393863] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [191.394591] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [191.428770] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [191.429155] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [191.429832] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [191.430507] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [191.431286] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [191.432014] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [191.432714] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [191.433372] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [191.434056] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [191.434706] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [191.434840] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [191.435102] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [191.435791] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [191.435929] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [191.442103] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [191.442209] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.442581] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [191.444691] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [191.447158] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [191.479328] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [191.479338] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [191.479342] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [191.479345] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [191.479583] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [191.479709] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [191.480016] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [191.480146] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [191.480169] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [191.485115] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [191.553970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.554740] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [191.561863] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [191.563694] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [191.564597] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [191.565360] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [191.566293] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [191.567251] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [196.660244] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [196.660732] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [196.661374] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [196.661997] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [196.662714] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [196.663475] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [196.664176] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [196.664875] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [196.665522] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [196.665980] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [196.666110] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [196.666408] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [196.667087] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [196.667224] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [196.673412] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [196.673512] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [196.673787] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [196.674734] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [196.678369] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [196.711475] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [196.712783] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [196.712787] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [196.712790] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [196.713003] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [196.713131] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [196.713465] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [196.713594] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [196.713617] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [196.718803] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [196.777610] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [196.777947] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [196.786073] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [196.787488] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [196.787722] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [196.788006] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [196.788144] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [196.788337] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [198.849740] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [198.864599] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [198.865218] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [198.865828] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [198.866489] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [198.867215] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [198.867913] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [198.868636] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [198.869310] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [198.869942] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [198.870512] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [198.870659] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [198.871037] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [198.871752] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [198.871890] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [198.879246] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [198.879393] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [198.884333] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [198.916770] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [198.916781] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [198.916784] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [198.916789] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [198.917005] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [198.917139] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [198.917454] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [198.917623] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [198.917664] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [198.922440] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [198.927823] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [198.932335] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [198.963074] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [198.963083] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [198.963086] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [198.963090] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [198.964267] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [198.964455] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [198.964826] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [198.964981] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [198.965002] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [198.970330] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [198.976437] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [198.976704] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [198.981319] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [198.982687] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [198.982965] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [198.983286] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [198.983428] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [198.983609] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [201.890155] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [201.890583] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [201.891315] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [201.892105] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [201.892862] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [201.893703] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [201.894485] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [201.895256] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [201.895748] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [201.895973] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [201.896108] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [201.896366] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [201.897071] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [201.897204] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [201.904580] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [201.904678] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [201.904976] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [201.905100] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [201.909562] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [201.955033] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [201.955044] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [201.955048] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [201.955051] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [201.956253] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [201.956395] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [201.957477] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [201.957614] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [201.957638] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [201.962369] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [202.009015] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [202.009227] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [202.014917] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [202.016248] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [202.016494] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [202.016778] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [202.016972] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [202.017154] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [207.121305] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [207.121795] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [207.122405] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [207.123074] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [207.123803] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [207.124562] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [207.125269] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [207.125960] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [207.126617] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [207.127082] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [207.127217] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [207.127469] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [207.128153] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [207.128291] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [207.134441] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [207.134537] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [207.134756] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [207.135754] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [207.139421] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [207.170056] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [207.170066] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [207.170070] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [207.170073] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [207.170277] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [207.170400] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [207.171220] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [207.171349] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [207.171372] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [207.176126] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [207.240881] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [207.241468] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [207.248604] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [207.250029] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [207.250277] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [207.250584] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [207.250732] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [207.250910] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [209.088714] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [209.100580] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [209.100958] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [209.101593] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [209.102224] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [209.102942] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [209.103672] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [209.104341] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [209.105064] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [209.105731] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [209.106416] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [209.106774] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [209.107162] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [209.107861] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [209.107997] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [209.114133] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [209.114223] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [209.119082] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [209.150276] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [209.150285] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [209.150289] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [209.150292] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [209.150502] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [209.150630] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [209.150937] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [209.151067] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [209.151090] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [209.155945] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [209.160836] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [209.165696] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [209.197590] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [209.197598] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [209.197602] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [209.197605] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [209.197824] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [209.197949] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [209.198255] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [209.198383] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [209.198403] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [209.203779] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [209.208643] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [209.208818] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [209.212281] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [209.213617] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [209.213892] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [209.214195] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [209.214341] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [209.214540] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [212.352350] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [212.352772] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [212.353519] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [212.354182] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [212.354966] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [212.355749] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [212.356502] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [212.357244] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [212.357914] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [212.358171] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [212.358327] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [212.358609] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [212.359302] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [212.359438] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [212.366848] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [212.367036] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.367528] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [212.368532] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [212.372273] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [212.415438] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [212.415448] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [212.415452] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [212.415455] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [212.415664] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [212.416778] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [212.417098] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [212.418378] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [212.418401] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [212.422853] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [212.480607] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.481361] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [212.487259] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [212.488604] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [212.488861] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [212.489145] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [212.489312] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [212.489518] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [217.585011] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [217.585426] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [217.586124] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [217.586895] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [217.587612] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [217.588405] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [217.589088] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [217.589628] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [217.589805] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [217.590099] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [217.590232] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [217.590485] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [217.591201] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [217.591334] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [217.598736] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [217.598856] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.599127] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [217.600066] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [217.603680] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [217.632263] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [217.632273] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [217.632277] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [217.632280] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [217.632501] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [217.632629] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [217.632939] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [217.633069] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [217.633092] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [217.638150] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [217.704142] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.704920] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [217.710839] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [217.712240] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [217.712478] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [217.712762] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [217.712931] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [217.713128] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.327954] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [219.340786] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [219.341171] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [219.341819] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [219.342494] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [219.343248] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [219.343972] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [219.344642] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [219.345383] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [219.346058] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [219.346701] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [219.346846] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [219.347099] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [219.347802] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [219.347941] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [219.354085] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [219.354177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.359067] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [219.388620] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [219.388631] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [219.388634] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [219.388638] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [219.388846] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [219.388982] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [219.389290] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [219.389418] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [219.389441] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [219.394581] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [219.399479] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [219.404353] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [219.434651] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [219.434660] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [219.434663] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [219.435162] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [219.435377] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [219.435505] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [219.435815] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [219.435946] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [219.435968] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [219.441189] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [219.446073] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.446227] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [219.449686] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [219.451064] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [219.451303] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [219.451590] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [219.451743] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [219.451916] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [222.814538] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [222.814921] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [222.815556] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [222.816181] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [222.816889] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [222.817576] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [222.818226] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [222.818915] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [222.819566] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [222.820744] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [222.820883] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [222.821170] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [222.821876] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [222.822023] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [222.829407] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [222.829524] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.829856] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [222.829967] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [222.834455] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [222.864115] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [222.864125] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [222.864128] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [222.864132] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [222.864337] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [222.865114] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [222.865455] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [222.865586] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [222.865609] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [222.870036] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [222.935603] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.936296] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [222.942260] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [222.943661] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [222.943900] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [222.944184] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [222.944322] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [222.944524] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [228.045067] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [228.045455] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [228.046104] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [228.046792] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [228.047584] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [228.048388] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [228.049149] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [228.049865] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [228.050602] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [228.051318] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [228.051885] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [228.052655] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [228.054761] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [228.055379] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [228.062951] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [228.063108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [228.063380] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [228.065434] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [228.069081] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [228.114610] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [228.114621] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [228.114624] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [228.114628] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [228.115843] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [228.115978] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [228.117022] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [228.117153] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [228.117176] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [228.121928] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [228.175271] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [228.175662] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [228.182653] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [228.184086] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [228.184371] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [228.184659] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [228.184797] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [228.185011] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [229.567034] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [229.578986] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [229.579370] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [229.580024] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [229.580700] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [229.581469] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [229.582215] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [229.582929] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [229.583629] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [229.584338] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [229.584886] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [229.585020] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [229.585277] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [229.585978] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [229.586115] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [229.592265] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [229.592357] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [229.597231] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [229.628756] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [229.628765] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [229.628768] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [229.628771] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [229.629165] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [229.629295] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [229.629601] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [229.629730] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [229.629752] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [229.634073] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [229.638964] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [229.643831] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [229.674504] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [229.674512] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [229.674515] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [229.674518] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [229.674715] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [229.674837] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [229.675929] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [229.676058] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [229.676078] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [229.680616] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [229.685487] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [229.685665] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [229.689146] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [229.690489] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [229.690724] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [229.691027] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [229.691169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [229.691347] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [233.291132] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [233.291601] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [233.292271] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [233.292987] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [233.293701] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [233.294435] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [233.295174] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [233.295902] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [233.296632] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [233.297179] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [233.297314] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [233.297581] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [233.298304] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [233.298930] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [233.308033] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [233.308282] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [233.308942] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [233.309852] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [233.313666] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [233.344343] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [233.344354] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [233.344357] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [233.344361] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [233.344578] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [233.344709] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [233.345022] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [233.345151] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [233.345173] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [233.350405] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [233.414768] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [233.415465] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [233.420296] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [233.421623] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [233.421864] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [233.422148] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [233.422286] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [233.422459] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [238.525213] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [238.525639] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [238.526386] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [238.527054] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [238.527807] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [238.528522] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [238.529192] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [238.529847] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [238.530507] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [238.530974] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [238.531123] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [238.531381] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [238.532066] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [238.532229] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [238.538398] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [238.538496] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [238.538770] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [238.540878] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [238.543377] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [238.586553] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [238.586564] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [238.586568] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [238.586571] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [238.586786] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [238.587845] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [238.588166] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [238.589059] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [238.589081] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [238.593881] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [238.646378] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [238.647138] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [238.653010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [238.654371] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [238.654610] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [238.654893] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [238.655032] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [238.655216] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [239.806254] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [239.818165] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [239.818551] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [239.819223] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [239.820164] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [239.821165] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [239.822176] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [239.823161] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [239.824001] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [239.824271] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [239.825046] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [239.825244] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [239.825581] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [239.826365] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [239.826505] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [239.833919] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [239.834033] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [239.838848] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [239.884298] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [239.884309] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [239.884312] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [239.884315] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [239.885561] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [239.885756] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [239.886788] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [239.886987] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [239.887026] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [239.891685] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [239.896592] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [239.901449] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [239.946904] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [239.946913] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [239.946916] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [239.946919] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [239.948144] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [239.948330] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [239.949368] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [239.949559] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [239.949597] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [239.954259] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [239.960303] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [239.960533] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [239.965148] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [239.966552] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [239.966813] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [239.967112] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [239.967253] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [239.967427] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [243.745140] [IGT] i915_pm_rpm: finished subtest extra-wait-smem0, SUCCESS <6> [243.746613] [IGT] i915_pm_rpm: finished subtest gem-execbuf-stress, SUCCESS <7> [243.749573] i915 0000:00:02.0: [drm:compute_baseline_pipe_bpp [i915]] [CONNECTOR:400:HDMI-A-2] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [243.749769] i915 0000:00:02.0: [drm:intel_hdmi_compute_output_format [i915]] picking 8 bpc for HDMI output (pipe bpp: 24) <7> [243.749899] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [243.750038] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:399:DDI TC1/PHY C] [CRTC:151:pipe A] <7> [243.750171] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [243.750316] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [243.750454] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [243.750594] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [243.750747] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040) <7> [243.750891] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [243.751026] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920) <7> [243.751159] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2360) <7> [243.751292] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920) <7> [243.751426] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2360) <7> [243.751560] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008) <7> [243.751702] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2096) <7> [243.751835] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080) <7> [243.751967] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080) <7> [243.752099] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084) <7> [243.752232] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089) <7> [243.752365] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125) <7> [243.752497] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125) <7> [243.752630] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920) <7> [243.752776] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2360) <7> [243.752910] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920) <7> [243.753043] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2360) <7> [243.753176] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008) <7> [243.753306] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2096) <7> [243.753439] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080) <7> [243.753571] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080) <7> [243.753711] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084) <7> [243.753845] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089) <7> [243.753977] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125) <7> [243.754109] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125) <7> [243.754241] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [243.754374] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1) <7> [243.754508] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4) <7> [243.754649] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [243.754781] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 139929) <7> [243.754914] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 139929) <7> [243.755046] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 0, found 139929) <7> [243.755179] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [243.755337] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no <7> [243.755471] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1 <7> [243.755605] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 2016), size 0 -> 2016 <7> [243.755746] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (2016 - 2048), size 0 -> 32 <7> [243.755876] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [243.756006] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 <7> [243.756139] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 <7> [243.756271] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 <7> [243.756414] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 559716 num active planes 1 <7> [243.756551] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 560 <7> [243.756694] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [243.756843] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 0 kHz -> 69965 kHz <7> [243.756994] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 8746 kHz <7> [243.757131] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:151:pipe A] allocated DPLL 0 <7> [243.757271] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:151:pipe A] reserving DPLL 0 <7> [243.757412] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: yes [modeset] <7> [243.757547] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [243.757691] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7> [243.757825] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [243.757961] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [243.758096] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [243.758229] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [243.758362] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7> [243.758496] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2 <7> [243.758629] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [243.758787] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 42, guardband: 44 vsync start: 0, vsync end: 0 <7> [243.758919] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1125, vmax vtotal: 1125 <7> [243.759051] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [243.759183] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [243.759315] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [243.759449] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [243.759581] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 53 139929 1920 2008 2096 2360 1080 1084 1089 1125 0x40 0x5 <7> [243.759723] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [243.759855] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 139929, pixel rate 139929, min cdclk 69965, min voltage level 0 <7> [243.759987] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 135, ips linetime: 0 <7> [243.760118] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0 <7> [243.760250] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 1920x1080+0+0 <7> [243.760381] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [243.760514] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [243.760651] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [243.760783] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [243.760916] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [243.761050] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [243.761183] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [243.761314] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [243.761446] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [243.761577] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [243.761718] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [243.761850] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [243.761982] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [243.762113] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [243.762243] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [243.762375] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [243.762507] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:416] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [243.762647] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 1 <7> [243.762780] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [243.762911] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7> [243.763043] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7> [243.763176] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7> [243.763313] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7> [243.763450] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no <7> [243.774785] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [243.774912] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [243.775060] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [243.775237] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [243.775467] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [243.775687] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [243.775888] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [243.776088] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [243.776270] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [243.776516] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [243.776659] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [243.777140] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [243.777880] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [243.778023] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [243.785484] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [243.785684] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [243.785823] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [243.786670] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [243.788061] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [243.788235] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI B/PHY B] <7> [243.788392] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:399:DDI TC1/PHY C] <7> [243.788546] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DDI TC2/PHY D] <7> [243.788726] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST A] <7> [243.788876] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST B] <7> [243.789025] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DP-MST C] <7> [243.789227] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3 <7> [243.789478] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A] <7> [243.789643] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [243.789859] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_TC1 <7> [243.790037] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [243.790096] i915 0000:00:02.0: [drm:pxp_session_work [i915]] PXP: processing event-flags 0x0000000d <7> [243.790855] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1 <7> [243.791003] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:35:plane 1A] <7> [243.809031] i915 0000:00:02.0: [drm:pxp_session_work [i915]] PXP: processing event-flags 0x0000000a <7> [243.809282] i915 0000:00:02.0: [drm:pxp_session_work [i915]] PXP: creating arb_session after invalidation <7> [243.810122] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:400:HDMI-A-2] <7> [243.810588] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A] <7> [243.812092] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [243.812099] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <6> [243.813056] [IGT] i915_pm_rpm: exiting, ret=0 <7> [243.816645] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [243.838523] i915 0000:00:02.0: [drm:pxp_session_work [i915]] PXP ARB session is alive <7> [243.842469] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [243.842479] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [243.842482] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [243.842485] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [243.842689] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [243.842817] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [243.843122] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [243.843251] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <6> [243.847878] Console: switching to colour frame buffer device 240x67 <7> [243.847865] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [243.852061] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [187.330352] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]

<7> [187.330359] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [187.334548] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected

<7> [187.334597] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2]

<7> [187.334603] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [187.360281] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [187.360290] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [187.360293] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [187.360296] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [187.360495] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [187.360619] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [187.360926] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [187.361057] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [187.361424] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH)

<7> [187.361431] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [187.361437] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [187.361443] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] probed modes:

<7> [187.361446] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [187.361449] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5

<7> [187.361452] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa

<7> [187.361455] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa

<7> [187.361457] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa

<7> [187.361460] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa

<7> [187.361463] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa

<7> [187.361466] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [187.361469] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6

<7> [187.361471] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [187.361474] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [187.361477] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6

<7> [187.361480] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa

<7> [187.361483] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [187.361485] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5

<7> [187.361488] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [187.361491] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [187.361494] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [187.361496] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5

<7> [187.361499] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [187.361502] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [187.361505] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [187.361507] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6

<7> [187.361510] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa

<7> [187.361513] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5

<7> [187.361516] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [187.361519] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa

<7> [187.361522] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [187.361524] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [187.361527] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [187.361530] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6

<7> [187.361577] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1]

<7> [187.361581] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [187.365761] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected

<7> [187.365795] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3]

<7> [187.365798] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [187.370003] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected

<7> [187.374615] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]

<7> [187.374621] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [187.378810] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected

<7> [187.379184] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1]

<7> [187.379188] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [187.383363] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected

<7> [187.383609] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3]

<7> [187.383613] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [187.387832] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected

<7> [187.388066] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]

<7> [187.388070] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [187.392273] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected

<7> [187.392285] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2]

<7> [187.392288] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [187.417927] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [187.417936] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [187.417939] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [187.417942] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [187.418158] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [187.418283] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [187.418590] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [187.418716] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [187.419096] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH)

<7> [187.419103] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [187.419108] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [187.419114] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] probed modes:

<7> [187.419117] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [187.419120] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5

<7> [187.419123] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa

<7> [187.419126] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa

<7> [187.419129] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa

<7> [187.419131] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa

<7> [187.419134] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa

<7> [187.419137] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [187.419140] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6

<7> [187.419143] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [187.419145] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [187.419148] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6

<7> [187.419151] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa

<7> [187.419154] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [187.419157] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5

<7> [187.419159] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [187.419162] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [187.419165] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [187.419168] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5

<7> [187.419170] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [187.419173] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [187.419176] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [187.419179] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6

<7> [187.419181] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa

<7> [187.419184] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5

<7> [187.419187] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [187.419190] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa

<7> [187.419192] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [187.419195] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [187.419198] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [187.419201] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6

<7> [187.419222] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1]

<7> [187.419226] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [187.423410] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected

<7> [187.423422] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3]

<7> [187.423425] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [187.427605] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected

<7> [188.442766] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A]

<7> [188.443068] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [188.443791] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [188.444428] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [188.445094] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [188.445649] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000)

<7> [188.445793] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [188.445927] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)

<7> [188.446060] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2360, found 0)

<7> [188.446192] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)

<7> [188.446325] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2360, found 0)

<7> [188.446457] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0)

<7> [188.446589] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2096, found 0)

<7> [188.446728] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)

<7> [188.446861] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)

<7> [188.446992] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0)

<7> [188.447124] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0)

<7> [188.447256] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0)

<7> [188.447387] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0)

<7> [188.447521] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)

<7> [188.447653] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2360, found 0)

<7> [188.447805] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)

<7> [188.447937] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2360, found 0)

<7> [188.448069] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0)

<7> [188.448201] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2096, found 0)

<7> [188.448333] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)

<7> [188.448465] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)

<7> [188.448597] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0)

<7> [188.448737] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0)

<7> [188.448869] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0)

<7> [188.449002] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0)

<7> [188.449134] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [188.449267] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)

<7> [188.449399] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)

<7> [188.449531] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [188.449663] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 139929, found 0)

<7> [188.449804] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 139929, found 0)

<7> [188.449936] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 139929, found 0)

<7> [188.450068] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [188.450201] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:151:pipe A] releasing DPLL 0

<7> [188.450360] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no

<7> [188.450492] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [188.450643] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 2016) -> ( 0 - 0), size 2016 -> 0

<7> [188.450784] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb (2016 - 2048) -> ( 0 - 0), size 32 -> 0

<7> [188.450919] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [188.451051] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [188.451180] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [188.451312] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [188.451458] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0

<7> [188.451596] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0

<7> [188.451738] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [188.451887] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 69965 kHz -> 0 kHz

<7> [188.452037] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 8746 kHz -> 0 kHz

<7> [188.452174] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: no [modeset]

<7> [188.452311] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no

<7> [188.452445] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no

<7> [188.452578] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no

<7> [188.452721] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no

<7> [188.452855] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no

<7> [188.452989] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no

<7> [188.464071] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [188.482867] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_TC1

<7> [188.483462] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A]

<7> [188.484226] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [188.484871] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:35:plane 1A]

<7> [188.485471] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI B/PHY B]

<7> [188.486082] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:399:DDI TC1/PHY C]

<7> [188.486695] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DDI TC2/PHY D]

<7> [188.487306] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST A]

<7> [188.487895] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST B]

<7> [188.488465] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DP-MST C]

<7> [188.489074] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [188.489887] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [188.490432] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [188.490989] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A]

<7> [188.492188] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B]

<7> [188.492585] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C]

<7> [188.594117] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [188.594842] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [188.595440] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [188.597213] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [188.597968] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [188.602556] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [188.603957] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [188.604191] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [188.604472] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [188.604609] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [188.604798] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [188.696432] [IGT] i915_pm_rpm: starting subtest gem-execbuf-stress

<7> [188.714236] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [188.714919] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [188.715539] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [188.716221] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [188.716925] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [188.717611] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [188.719027] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [188.719707] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [188.720380] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [188.721914] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [188.722497] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [188.723803] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [188.725738] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [188.726226] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [188.737624] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [188.738032] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [188.738263] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [188.742753] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [188.755087] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A]

<7> [188.771776] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [188.771787] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [188.771791] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [188.771795] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [188.772479] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [188.772625] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [188.773772] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [188.773922] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [188.773959] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [188.778457] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [188.783429] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [188.784461] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [188.785905] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B]

<7> [188.786020] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C]

<7> [188.858031] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [188.858749] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [188.859456] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [188.861248] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [188.861981] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [188.869084] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [188.870555] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [188.871332] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [188.872152] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [188.872753] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [188.873326] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [188.899221] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [188.899615] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [188.900288] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [188.900945] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [188.901625] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [188.902343] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [188.903033] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [188.903710] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [188.904350] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [188.906003] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [188.906562] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [188.907925] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [188.910045] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [188.910616] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [188.922341] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [188.922887] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [188.923105] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [188.924503] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [188.927669] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [188.960313] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [188.960324] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [188.960328] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [188.960331] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [188.960539] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [188.960668] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [188.961481] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [188.961618] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [188.961642] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [188.966187] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [189.033888] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [189.034587] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [189.041828] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [189.043639] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [189.044456] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [189.045413] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [189.046330] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [189.047206] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [189.140621] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [189.141117] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [189.141774] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [189.142647] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [189.143693] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [189.144462] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [189.145179] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [189.146114] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [189.147108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [189.148598] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [189.149473] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [189.151048] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [189.153203] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [189.153898] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [189.164262] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [189.164455] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [189.165563] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [189.165758] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [189.170195] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [189.201535] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [189.201546] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [189.201549] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [189.201553] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [189.201760] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [189.201889] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [189.202194] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [189.202323] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [189.202346] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [189.207227] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [189.273996] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [189.275390] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [189.281277] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [189.282699] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [189.282951] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [189.283235] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [189.283374] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [189.283546] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [189.380855] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [189.381245] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [189.381917] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [189.382546] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [189.383261] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [189.383954] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [189.384610] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [189.385321] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [189.385980] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [189.386681] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [189.386817] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [189.387077] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [189.387762] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [189.387900] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [189.394051] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [189.394155] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [189.394432] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [189.396059] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [189.399008] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [189.429624] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [189.429634] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [189.429638] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [189.429641] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [189.430799] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [189.430928] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [189.431246] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [189.431376] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [189.431399] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [189.435686] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [189.505900] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [189.506170] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [189.513051] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [189.514493] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [189.515257] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [189.516060] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [189.516636] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [189.517305] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [189.610854] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [189.611244] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [189.611902] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [189.612531] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [189.613252] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [189.613949] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [189.614674] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [189.615334] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [189.615995] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [189.616370] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [189.616505] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [189.616798] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [189.617486] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [189.617625] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [189.623783] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [189.623883] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [189.624153] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [189.624847] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [189.628748] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [189.660882] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [189.660892] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [189.660896] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [189.660900] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [189.661105] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [189.661229] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [189.661542] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [189.661974] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [189.661997] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [189.666926] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [189.730044] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [189.730786] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [189.737903] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [189.739430] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [189.740192] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [189.741003] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [189.741603] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [189.742288] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [189.838724] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [189.838843] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [189.838991] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [189.839166] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [189.839391] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [189.839599] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [189.839819] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [189.840086] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [189.840340] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [189.841001] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [189.841204] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [189.841588] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [189.842365] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [189.842564] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [189.848793] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [189.848947] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [189.849216] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [189.850716] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [189.853779] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [189.880505] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [189.880518] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [189.880521] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [189.880524] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [189.880750] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [189.880963] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [189.881332] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [189.881528] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [189.881575] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [189.886899] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [189.953888] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [189.954576] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [189.960536] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [189.962012] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [189.962755] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [189.963514] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [189.964153] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [189.965580] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [190.065597] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [190.066092] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [190.066744] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [190.067366] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [190.068106] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [190.068799] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [190.069453] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [190.070146] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [190.070791] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [190.071467] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [190.072095] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [190.072863] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [190.074940] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [190.075517] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [190.085882] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [190.086082] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [190.086680] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [190.086861] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [190.091458] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [190.137081] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [190.137092] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [190.137095] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [190.137098] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [190.137318] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [190.138422] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [190.138749] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [190.139647] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [190.139673] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [190.144454] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [190.193850] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [190.194329] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [190.201662] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [190.203058] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [190.203297] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [190.203580] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [190.203740] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [190.203926] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [190.305803] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [190.306184] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [190.306868] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [190.307794] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [190.308768] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [190.309763] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [190.310724] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [190.311266] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [190.311517] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [190.311826] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [190.312029] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [190.312365] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [190.313134] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [190.313334] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [190.320778] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [190.320913] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [190.321240] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [190.321361] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [190.325857] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [190.357817] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [190.357827] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [190.357831] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [190.357834] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [190.358044] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [190.358168] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [190.358480] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [190.358617] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [190.358876] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [190.365010] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [190.425783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [190.426329] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [190.432197] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [190.433663] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [190.434462] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [190.435314] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [190.435975] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [190.436592] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [190.537647] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [190.538035] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [190.538676] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [190.539388] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [190.540133] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [190.540926] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [190.541575] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [190.542285] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [190.543002] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [190.543661] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [190.544327] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [190.545114] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [190.547245] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [190.547867] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [190.558174] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [190.558398] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [190.558818] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [190.561140] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [190.563671] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [190.596871] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [190.596882] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [190.596886] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [190.596889] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [190.597098] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [190.597221] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [190.597530] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [190.597999] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [190.598023] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [190.602946] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [190.666771] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [190.667457] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [190.674659] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [190.676123] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [190.676858] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [190.677654] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [190.678225] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [190.678898] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [190.777776] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [190.778162] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [190.778831] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [190.779453] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [190.780170] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [190.780866] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [190.781521] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [190.782213] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [190.782870] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [190.783542] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [190.784174] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [190.784918] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [190.786986] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [190.787566] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [190.796717] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [190.796938] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [190.797494] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [190.798191] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [190.802194] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [190.832176] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [190.832185] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [190.832189] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [190.832192] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [190.832402] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [190.832525] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [190.833093] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [190.833223] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [190.833246] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [190.837847] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [190.906018] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [190.906780] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [190.913830] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [190.915305] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [190.916058] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [190.916861] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [190.917428] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [190.918132] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [191.013789] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [191.014176] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [191.014830] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [191.015469] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [191.016188] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [191.016888] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [191.017556] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [191.018272] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [191.018931] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [191.019253] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [191.019389] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [191.019654] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [191.020342] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [191.020480] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [191.026638] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [191.026738] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [191.027011] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [191.029125] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [191.031625] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [191.062271] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [191.062282] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [191.062285] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [191.062288] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [191.062500] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [191.063435] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [191.063746] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [191.063877] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [191.063900] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [191.068375] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [191.138028] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [191.138797] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [191.145839] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [191.147321] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [191.148061] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [191.148871] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [191.149437] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [191.150138] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [191.235810] [IGT] i915_pm_rpm: starting dynamic subtest extra-wait-smem0

<7> [191.250719] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [191.250875] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [191.251134] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [191.251420] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [191.251780] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [191.252100] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [191.252412] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [191.252795] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [191.253115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [191.253731] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [191.254003] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [191.254596] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [191.255735] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [191.256017] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [191.264772] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [191.264941] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [191.265262] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [191.271005] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [191.271857] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A]

<7> [191.302302] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [191.302311] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [191.302315] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [191.302319] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [191.302525] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [191.303217] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [191.303566] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [191.303705] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [191.303730] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [191.308179] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [191.313116] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [191.314133] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [191.315546] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B]

<7> [191.315662] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C]

<7> [191.377918] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [191.378669] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [191.379515] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [191.381589] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [191.382479] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [191.389708] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [191.391501] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [191.392443] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [191.393168] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [191.393863] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [191.394591] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [191.428770] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [191.429155] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [191.429832] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [191.430507] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [191.431286] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [191.432014] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [191.432714] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [191.433372] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [191.434056] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [191.434706] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [191.434840] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [191.435102] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [191.435791] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [191.435929] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [191.442103] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [191.442209] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [191.442581] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [191.444691] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [191.447158] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [191.479328] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [191.479338] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [191.479342] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [191.479345] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [191.479583] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [191.479709] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [191.480016] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [191.480146] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [191.480169] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [191.485115] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [191.553970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [191.554740] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [191.561863] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [191.563694] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [191.564597] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [191.565360] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [191.566293] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [191.567251] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [196.660244] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [196.660732] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [196.661374] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [196.661997] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [196.662714] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [196.663475] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [196.664176] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [196.664875] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [196.665522] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [196.665980] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [196.666110] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [196.666408] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [196.667087] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [196.667224] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [196.673412] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [196.673512] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [196.673787] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [196.674734] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [196.678369] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [196.711475] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [196.712783] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [196.712787] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [196.712790] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [196.713003] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [196.713131] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [196.713465] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [196.713594] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [196.713617] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [196.718803] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [196.777610] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [196.777947] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [196.786073] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [196.787488] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [196.787722] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [196.788006] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [196.788144] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [196.788337] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [198.849740] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [198.864599] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [198.865218] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [198.865828] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [198.866489] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [198.867215] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [198.867913] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [198.868636] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [198.869310] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [198.869942] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [198.870512] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [198.870659] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [198.871037] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [198.871752] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [198.871890] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [198.879246] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [198.879393] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [198.884333] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [198.916770] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [198.916781] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [198.916784] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [198.916789] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [198.917005] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [198.917139] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [198.917454] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [198.917623] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [198.917664] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [198.922440] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [198.927823] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [198.932335] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [198.963074] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [198.963083] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [198.963086] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [198.963090] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [198.964267] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [198.964455] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [198.964826] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [198.964981] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [198.965002] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [198.970330] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [198.976437] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [198.976704] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [198.981319] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [198.982687] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [198.982965] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [198.983286] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [198.983428] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [198.983609] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [201.890155] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [201.890583] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [201.891315] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [201.892105] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [201.892862] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [201.893703] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [201.894485] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [201.895256] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [201.895748] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [201.895973] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [201.896108] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [201.896366] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [201.897071] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [201.897204] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [201.904580] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [201.904678] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [201.904976] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [201.905100] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [201.909562] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [201.955033] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [201.955044] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [201.955048] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [201.955051] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [201.956253] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [201.956395] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [201.957477] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [201.957614] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [201.957638] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [201.962369] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [202.009015] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [202.009227] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [202.014917] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [202.016248] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [202.016494] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [202.016778] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [202.016972] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [202.017154] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [207.121305] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [207.121795] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [207.122405] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [207.123074] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [207.123803] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [207.124562] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [207.125269] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [207.125960] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [207.126617] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [207.127082] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [207.127217] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [207.127469] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [207.128153] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [207.128291] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [207.134441] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [207.134537] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [207.134756] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [207.135754] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [207.139421] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [207.170056] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [207.170066] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [207.170070] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [207.170073] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [207.170277] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [207.170400] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [207.171220] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [207.171349] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [207.171372] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [207.176126] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [207.240881] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [207.241468] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [207.248604] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [207.250029] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [207.250277] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [207.250584] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [207.250732] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [207.250910] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [209.088714] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [209.100580] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [209.100958] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [209.101593] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [209.102224] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [209.102942] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [209.103672] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [209.104341] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [209.105064] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [209.105731] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [209.106416] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [209.106774] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [209.107162] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [209.107861] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [209.107997] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [209.114133] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [209.114223] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [209.119082] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [209.150276] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [209.150285] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [209.150289] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [209.150292] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [209.150502] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [209.150630] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [209.150937] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [209.151067] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [209.151090] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [209.155945] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [209.160836] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [209.165696] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [209.197590] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [209.197598] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [209.197602] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [209.197605] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [209.197824] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [209.197949] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [209.198255] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [209.198383] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [209.198403] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [209.203779] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [209.208643] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [209.208818] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [209.212281] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [209.213617] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [209.213892] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [209.214195] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [209.214341] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [209.214540] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [212.352350] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [212.352772] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [212.353519] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [212.354182] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [212.354966] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [212.355749] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [212.356502] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [212.357244] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [212.357914] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [212.358171] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [212.358327] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [212.358609] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [212.359302] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [212.359438] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [212.366848] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [212.367036] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.367528] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [212.368532] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [212.372273] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [212.415438] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [212.415448] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [212.415452] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [212.415455] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [212.415664] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [212.416778] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [212.417098] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [212.418378] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [212.418401] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [212.422853] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [212.480607] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.481361] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [212.487259] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [212.488604] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [212.488861] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [212.489145] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [212.489312] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [212.489518] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [217.585011] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [217.585426] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [217.586124] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [217.586895] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [217.587612] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [217.588405] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [217.589088] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [217.589628] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [217.589805] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [217.590099] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [217.590232] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [217.590485] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [217.591201] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [217.591334] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [217.598736] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [217.598856] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.599127] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [217.600066] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [217.603680] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [217.632263] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [217.632273] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [217.632277] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [217.632280] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [217.632501] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [217.632629] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [217.632939] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [217.633069] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [217.633092] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [217.638150] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [217.704142] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.704920] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [217.710839] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [217.712240] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [217.712478] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [217.712762] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [217.712931] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [217.713128] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.327954] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [219.340786] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [219.341171] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [219.341819] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [219.342494] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [219.343248] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [219.343972] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [219.344642] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [219.345383] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [219.346058] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [219.346701] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [219.346846] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [219.347099] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [219.347802] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [219.347941] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [219.354085] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [219.354177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.359067] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [219.388620] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [219.388631] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [219.388634] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [219.388638] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [219.388846] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [219.388982] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [219.389290] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [219.389418] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [219.389441] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [219.394581] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [219.399479] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [219.404353] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [219.434651] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [219.434660] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [219.434663] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [219.435162] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [219.435377] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [219.435505] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [219.435815] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [219.435946] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [219.435968] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [219.441189] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [219.446073] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.446227] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [219.449686] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [219.451064] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [219.451303] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [219.451590] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [219.451743] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [219.451916] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [222.814538] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [222.814921] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [222.815556] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [222.816181] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [222.816889] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [222.817576] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [222.818226] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [222.818915] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [222.819566] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [222.820744] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [222.820883] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [222.821170] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [222.821876] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [222.822023] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [222.829407] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [222.829524] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.829856] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [222.829967] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [222.834455] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [222.864115] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [222.864125] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [222.864128] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [222.864132] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [222.864337] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [222.865114] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [222.865455] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [222.865586] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [222.865609] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [222.870036] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [222.935603] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.936296] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [222.942260] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [222.943661] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [222.943900] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [222.944184] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [222.944322] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [222.944524] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [228.045067] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [228.045455] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [228.046104] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [228.046792] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [228.047584] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [228.048388] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [228.049149] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [228.049865] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [228.050602] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [228.051318] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [228.051885] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [228.052655] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [228.054761] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [228.055379] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [228.062951] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [228.063108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [228.063380] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [228.065434] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [228.069081] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [228.114610] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [228.114621] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [228.114624] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [228.114628] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [228.115843] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [228.115978] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [228.117022] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [228.117153] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [228.117176] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [228.121928] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [228.175271] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [228.175662] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [228.182653] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [228.184086] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [228.184371] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [228.184659] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [228.184797] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [228.185011] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [229.567034] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [229.578986] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [229.579370] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [229.580024] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [229.580700] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [229.581469] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [229.582215] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [229.582929] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [229.583629] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [229.584338] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [229.584886] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [229.585020] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [229.585277] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [229.585978] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [229.586115] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [229.592265] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [229.592357] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [229.597231] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [229.628756] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [229.628765] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [229.628768] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [229.628771] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [229.629165] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [229.629295] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [229.629601] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [229.629730] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [229.629752] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [229.634073] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [229.638964] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [229.643831] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [229.674504] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [229.674512] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [229.674515] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [229.674518] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [229.674715] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [229.674837] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [229.675929] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [229.676058] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [229.676078] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [229.680616] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [229.685487] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [229.685665] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [229.689146] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [229.690489] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [229.690724] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [229.691027] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [229.691169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [229.691347] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [233.291132] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [233.291601] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [233.292271] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [233.292987] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [233.293701] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [233.294435] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [233.295174] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [233.295902] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [233.296632] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [233.297179] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [233.297314] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [233.297581] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [233.298304] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [233.298930] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [233.308033] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [233.308282] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [233.308942] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [233.309852] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [233.313666] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [233.344343] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [233.344354] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [233.344357] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [233.344361] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [233.344578] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [233.344709] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [233.345022] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [233.345151] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [233.345173] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [233.350405] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [233.414768] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [233.415465] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [233.420296] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [233.421623] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [233.421864] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [233.422148] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [233.422286] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [233.422459] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [238.525213] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [238.525639] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [238.526386] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [238.527054] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [238.527807] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [238.528522] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [238.529192] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [238.529847] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [238.530507] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [238.530974] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [238.531123] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [238.531381] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [238.532066] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [238.532229] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [238.538398] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [238.538496] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [238.538770] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [238.540878] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [238.543377] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [238.586553] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [238.586564] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [238.586568] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [238.586571] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [238.586786] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [238.587845] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [238.588166] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [238.589059] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [238.589081] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [238.593881] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [238.646378] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [238.647138] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [238.653010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [238.654371] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [238.654610] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [238.654893] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [238.655032] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [238.655216] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [239.806254] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [239.818165] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [239.818551] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [239.819223] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [239.820164] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [239.821165] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [239.822176] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [239.823161] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [239.824001] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [239.824271] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [239.825046] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [239.825244] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [239.825581] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [239.826365] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [239.826505] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [239.833919] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [239.834033] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [239.838848] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [239.884298] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [239.884309] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [239.884312] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [239.884315] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [239.885561] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [239.885756] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [239.886788] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [239.886987] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [239.887026] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [239.891685] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [239.896592] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [239.901449] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [239.946904] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [239.946913] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [239.946916] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [239.946919] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [239.948144] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [239.948330] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [239.949368] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [239.949559] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [239.949597] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [239.954259] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [239.960303] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [239.960533] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [239.965148] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [239.966552] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [239.966813] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [239.967112] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [239.967253] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [239.967427] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [243.745140] [IGT] i915_pm_rpm: finished subtest extra-wait-smem0, SUCCESS

<6> [243.746613] [IGT] i915_pm_rpm: finished subtest gem-execbuf-stress, SUCCESS

<7> [243.749573] i915 0000:00:02.0: [drm:compute_baseline_pipe_bpp [i915]] [CONNECTOR:400:HDMI-A-2] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [243.749769] i915 0000:00:02.0: [drm:intel_hdmi_compute_output_format [i915]] picking 8 bpc for HDMI output (pipe bpp: 24)

<7> [243.749899] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [243.750038] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:399:DDI TC1/PHY C] [CRTC:151:pipe A]

<7> [243.750171] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [243.750316] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [243.750454] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [243.750594] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [243.750747] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040)

<7> [243.750891] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [243.751026] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)

<7> [243.751159] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2360)

<7> [243.751292] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)

<7> [243.751426] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2360)

<7> [243.751560] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008)

<7> [243.751702] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2096)

<7> [243.751835] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)

<7> [243.751967] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)

<7> [243.752099] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084)

<7> [243.752232] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089)

<7> [243.752365] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125)

<7> [243.752497] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125)

<7> [243.752630] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)

<7> [243.752776] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2360)

<7> [243.752910] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)

<7> [243.753043] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2360)

<7> [243.753176] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008)

<7> [243.753306] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2096)

<7> [243.753439] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)

<7> [243.753571] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)

<7> [243.753711] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084)

<7> [243.753845] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089)

<7> [243.753977] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125)

<7> [243.754109] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125)

<7> [243.754241] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [243.754374] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)

<7> [243.754508] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)

<7> [243.754649] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [243.754781] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 139929)

<7> [243.754914] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 139929)

<7> [243.755046] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 0, found 139929)

<7> [243.755179] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [243.755337] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no

<7> [243.755471] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1

<7> [243.755605] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 2016), size 0 -> 2016

<7> [243.755746] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (2016 - 2048), size 0 -> 32

<7> [243.755876] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [243.756006] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0

<7> [243.756139] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0

<7> [243.756271] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0

<7> [243.756414] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 559716 num active planes 1

<7> [243.756551] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 560

<7> [243.756694] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [243.756843] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 0 kHz -> 69965 kHz

<7> [243.756994] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 8746 kHz

<7> [243.757131] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:151:pipe A] allocated DPLL 0

<7> [243.757271] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:151:pipe A] reserving DPLL 0

<7> [243.757412] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: yes [modeset]

<7> [243.757547] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [243.757691] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0

<7> [243.757825] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [243.757961] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [243.758096] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [243.758229] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [243.758362] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0

<7> [243.758496] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2

<7> [243.758629] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [243.758787] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 42, guardband: 44 vsync start: 0, vsync end: 0

<7> [243.758919] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1125, vmax vtotal: 1125

<7> [243.759051] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [243.759183] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [243.759315] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [243.759449] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [243.759581] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 53 139929 1920 2008 2096 2360 1080 1084 1089 1125 0x40 0x5

<7> [243.759723] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [243.759855] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 139929, pixel rate 139929, min cdclk 69965, min voltage level 0

<7> [243.759987] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 135, ips linetime: 0

<7> [243.760118] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0

<7> [243.760250] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 1920x1080+0+0

<7> [243.760381] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [243.760514] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [243.760651] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [243.760783] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [243.760916] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [243.761050] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [243.761183] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [243.761314] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [243.761446] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [243.761577] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [243.761718] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [243.761850] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [243.761982] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [243.762113] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [243.762243] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [243.762375] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [243.762507] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:416] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [243.762647] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 1

<7> [243.762780] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [243.762911] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no

<7> [243.763043] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no

<7> [243.763176] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no

<7> [243.763313] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no

<7> [243.763450] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no

<7> [243.774785] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [243.774912] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [243.775060] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [243.775237] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [243.775467] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [243.775687] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [243.775888] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [243.776088] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [243.776270] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [243.776516] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [243.776659] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [243.777140] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [243.777880] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [243.778023] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [243.785484] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [243.785684] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [243.785823] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [243.786670] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [243.788061] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [243.788235] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI B/PHY B]

<7> [243.788392] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:399:DDI TC1/PHY C]

<7> [243.788546] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DDI TC2/PHY D]

<7> [243.788726] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST A]

<7> [243.788876] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST B]

<7> [243.789025] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DP-MST C]

<7> [243.789227] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3

<7> [243.789478] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A]

<7> [243.789643] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [243.789859] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_TC1

<7> [243.790037] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [243.790096] i915 0000:00:02.0: [drm:pxp_session_work [i915]] PXP: processing event-flags 0x0000000d

<7> [243.790855] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1

<7> [243.791003] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:35:plane 1A]

<7> [243.809031] i915 0000:00:02.0: [drm:pxp_session_work [i915]] PXP: processing event-flags 0x0000000a

<7> [243.809282] i915 0000:00:02.0: [drm:pxp_session_work [i915]] PXP: creating arb_session after invalidation

<7> [243.810122] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [243.810588] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A]

<7> [243.812092] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [243.812099] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [243.816645] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [243.838523] i915 0000:00:02.0: [drm:pxp_session_work [i915]] PXP ARB session is alive

<7> [243.842469] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [243.842479] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [243.842482] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [243.842485] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [243.842689] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [243.842817] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [243.843122] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [243.843251] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<6> [243.847878] Console: switching to colour frame buffer device 240x67

<7> [243.847865] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [243.852061] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

Results for igt@i915_pm_rpm@gem-execbuf-stress