igt@i915_pm_rpm@gem-execbuf-stress on shard-rkl@IGT

Detail	Value
Duration	55.13 seconds
Hostname	shard-rkl-4
Igt-Version	IGT-Version: 2.4-g1749e432c (x86_64) (Linux: 7.1.0-rc1-CI_DRM_18376-g41542c1ef015+ x86_64)
Out	Using IGT_SRANDOM=1777444067 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff88814787d7b8 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] transcoder_ddi_func_is_enabled+0xa7/0xf0 [i915] hsw_get_pipe_config+0x280/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x730 [i915] intel_atomic_commit_tail+0x1744/0x20c0 [i915] intel_atomic_commit+0x2ff/0x350 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x548/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 Starting subtest: gem-execbuf-stress Starting dynamic subtest: smem0 Dynamic subtest smem0: SUCCESS (2.620s) Starting dynamic subtest: extra-wait-smem0 Dynamic subtest extra-wait-smem0: SUCCESS (52.505s) Subtest gem-execbuf-stress: SUCCESS (55.131s)
Err	Starting subtest: gem-execbuf-stress Starting dynamic subtest: smem0 Dynamic subtest smem0: SUCCESS (2.620s) Starting dynamic subtest: extra-wait-smem0 Dynamic subtest extra-wait-smem0: SUCCESS (52.505s) Subtest gem-execbuf-stress: SUCCESS (55.131s)
Dmesg	<6> [446.669970] Console: switching to colour dummy device 80x25 <6> [446.670230] [IGT] i915_pm_rpm: executing <7> [446.672547] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [446.673020] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] <7> [446.673028] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [446.677262] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected <7> [446.677313] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] <7> [446.677319] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [446.703039] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [446.703049] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [446.703052] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [446.703055] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [446.703260] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [446.703392] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [446.703718] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [446.703847] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [446.704217] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH) <7> [446.704224] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [446.704230] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [446.704236] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] probed modes: <7> [446.704239] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [446.704242] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5 <7> [446.704245] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa <7> [446.704248] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa <7> [446.704250] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa <7> [446.704253] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa <7> [446.704256] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa <7> [446.704259] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [446.704261] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 <7> [446.704264] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [446.704267] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [446.704270] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6 <7> [446.704273] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa <7> [446.704275] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [446.704278] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 <7> [446.704281] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [446.704284] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [446.704286] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [446.704289] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 <7> [446.704292] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [446.704294] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [446.704297] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [446.704300] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6 <7> [446.704303] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa <7> [446.704305] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 <7> [446.704308] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [446.704311] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa <7> [446.704314] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [446.704316] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [446.704319] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [446.704322] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 <7> [446.704370] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] <7> [446.704373] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [446.708565] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected <7> [446.708601] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] <7> [446.708604] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [446.712799] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected <7> [446.717434] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] <7> [446.717439] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [446.721625] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected <7> [446.722002] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] <7> [446.722006] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [446.726181] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected <7> [446.726424] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] <7> [446.726427] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [446.730604] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected <7> [446.730867] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] <7> [446.730871] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [446.735086] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected <7> [446.735098] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] <7> [446.735102] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [446.760748] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [446.760755] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [446.760759] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [446.760762] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [446.760958] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [446.761080] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [446.761388] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [446.761512] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [446.761889] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH) <7> [446.761895] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [446.761901] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [446.761907] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] probed modes: <7> [446.761910] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [446.761913] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5 <7> [446.761916] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa <7> [446.761919] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa <7> [446.761921] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa <7> [446.761924] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa <7> [446.761927] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa <7> [446.761930] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [446.761933] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 <7> [446.761935] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [446.761938] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [446.761941] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6 <7> [446.761944] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa <7> [446.761946] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [446.761949] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 <7> [446.761952] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [446.761955] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [446.761957] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [446.761960] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 <7> [446.761963] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [446.761966] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [446.761968] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [446.761971] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6 <7> [446.761974] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa <7> [446.761977] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 <7> [446.761979] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [446.761982] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa <7> [446.761985] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [446.761988] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [446.761990] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [446.761993] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 <7> [446.762014] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] <7> [446.762018] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [446.766226] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected <7> [446.766238] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] <7> [446.766241] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [446.770425] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected <7> [446.770718] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:415] <7> [447.785802] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A] <7> [447.786096] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [447.786811] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [447.787443] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [447.788107] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [447.788763] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000) <7> [447.789391] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [447.790063] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0) <7> [447.790221] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2360, found 0) <7> [447.790354] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0) <7> [447.790486] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2360, found 0) <7> [447.790618] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0) <7> [447.790761] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2096, found 0) <7> [447.790891] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0) <7> [447.791023] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0) <7> [447.791154] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0) <7> [447.791285] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0) <7> [447.791417] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0) <7> [447.791546] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0) <7> [447.791689] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0) <7> [447.791819] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2360, found 0) <7> [447.791950] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0) <7> [447.792081] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2360, found 0) <7> [447.792213] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0) <7> [447.792346] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2096, found 0) <7> [447.792477] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0) <7> [447.792608] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0) <7> [447.792751] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0) <7> [447.792881] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0) <7> [447.793017] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0) <7> [447.793147] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0) <7> [447.793279] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [447.793409] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0) <7> [447.793544] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0) <7> [447.793693] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [447.793828] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 139929, found 0) <7> [447.793962] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 139929, found 0) <7> [447.794095] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 139929, found 0) <7> [447.794228] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [447.794362] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:151:pipe A] releasing DPLL 0 <7> [447.794519] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no <7> [447.794658] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [447.794813] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 2016) -> ( 0 - 0), size 2016 -> 0 <7> [447.794946] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb (2016 - 2048) -> ( 0 - 0), size 32 -> 0 <7> [447.795077] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [447.795206] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [447.795335] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [447.795464] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [447.795609] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0 <7> [447.795766] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0 <7> [447.795903] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [447.796056] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 69965 kHz -> 0 kHz <7> [447.796207] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 8746 kHz -> 0 kHz <7> [447.796344] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: no [modeset] <7> [447.796481] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no <7> [447.796616] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7> [447.796764] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7> [447.796899] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7> [447.797034] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7> [447.797167] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no <7> [447.808633] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [447.827814] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_TC1 <7> [447.828509] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A] <7> [447.829311] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [447.830028] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:35:plane 1A] <7> [447.830714] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI B/PHY B] <7> [447.831346] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:399:DDI TC1/PHY C] <7> [447.832057] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DDI TC2/PHY D] <7> [447.832695] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST A] <7> [447.833257] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST B] <7> [447.833874] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DP-MST C] <7> [447.834438] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:400:HDMI-A-2] <7> [447.835284] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [447.835921] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [447.836481] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A] <7> [447.837779] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B] <7> [447.838119] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C] <7> [447.941036] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [447.941795] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [447.942442] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [447.944262] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [447.944975] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [447.948453] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [447.949806] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [447.950033] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [447.950313] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [447.950451] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [447.950623] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [448.042466] [IGT] i915_pm_rpm: starting subtest gem-execbuf-stress <6> [448.044252] [IGT] i915_pm_rpm: starting dynamic subtest smem0 <7> [448.044876] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [448.061032] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [448.061766] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [448.062449] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [448.063280] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [448.064251] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [448.065100] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [448.065856] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [448.066572] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [448.067576] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [448.070330] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [448.071045] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [448.072467] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [448.074550] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [448.075131] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [448.087709] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [448.088137] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [448.088358] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [448.092855] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [448.100489] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A] <7> [448.122441] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [448.122451] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [448.122454] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [448.122458] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [448.122681] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [448.122808] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [448.123118] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [448.123250] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [448.123277] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [448.128513] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [448.133677] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [448.134508] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [448.135965] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B] <7> [448.136088] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C] <7> [448.229043] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [448.229858] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [448.230508] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [448.232349] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [448.233062] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [448.238947] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [448.240448] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [448.241250] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [448.242098] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [448.242741] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [448.243433] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [448.348919] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [448.349348] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [448.350072] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [448.350916] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [448.351745] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [448.352224] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [448.352423] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [448.352620] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [448.352815] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [448.353070] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [448.353205] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [448.353819] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [448.354522] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [448.354675] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [448.360888] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [448.360991] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [448.361682] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [448.363773] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [448.366365] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [448.396009] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [448.396020] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [448.396024] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [448.396027] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [448.396232] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [448.396360] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [448.396679] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [448.396814] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [448.396838] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [448.402070] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [448.469147] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [448.469970] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <6> [448.473639] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0 <4> [448.473674] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [448.473682] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [448.473690] nvme 0000:01:00.0: [ 0] RxErr (First) <7> [448.475888] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [448.477239] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [448.477484] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [448.477783] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [448.477923] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [448.478097] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [448.577348] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [448.577840] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [448.578515] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [448.579272] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [448.580350] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [448.581453] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [448.582343] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [448.583015] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [448.583193] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [448.583437] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [448.583572] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [448.584122] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [448.584826] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [448.584967] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [448.592384] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [448.592498] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [448.592841] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [448.593042] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [448.597358] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [448.628040] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [448.628050] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [448.628054] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [448.628057] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [448.628264] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [448.628394] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [448.628738] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [448.628935] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [448.628978] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [448.634204] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [448.700931] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [448.701759] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [448.708972] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [448.710551] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [448.711410] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [448.712316] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [448.713013] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [448.715024] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [448.807910] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [448.808338] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [448.809098] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [448.809888] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [448.810630] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [448.811466] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [448.812240] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [448.813023] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [448.813766] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [448.814521] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [448.815157] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [448.815487] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [448.816188] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [448.816325] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [448.823716] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [448.823858] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [448.824334] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [448.824499] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [448.829090] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [448.860007] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [448.860017] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [448.860021] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [448.860024] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [448.860222] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [448.860351] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [448.860655] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [448.861156] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [448.861213] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [448.866036] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [448.933042] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [448.933844] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [448.939741] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [448.941120] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [448.941405] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [448.941698] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [448.941836] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [448.942010] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [449.040882] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [449.041308] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [449.042036] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [449.042743] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [449.043466] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [449.044232] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [449.044999] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [449.045729] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [449.046421] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [449.047225] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [449.047905] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [449.048690] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [449.050958] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [449.051581] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [449.061971] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [449.062218] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [449.062709] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [449.063408] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [449.067293] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [449.097939] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [449.097949] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [449.097953] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [449.097956] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [449.098161] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [449.098287] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [449.098597] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [449.099121] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [449.099144] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [449.104063] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [449.173103] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [449.173915] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [449.179846] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [449.181230] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [449.181466] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [449.181766] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [449.181904] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [449.182078] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [449.279245] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [449.279666] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [449.280439] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [449.281270] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [449.282060] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [449.282338] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [449.282538] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [449.282777] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [449.282957] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [449.283211] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [449.283346] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [449.283594] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [449.284303] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [449.284442] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [449.289459] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [449.289560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [449.289852] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [449.290456] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [449.294316] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [449.326348] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [449.326358] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [449.326362] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [449.326365] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [449.326568] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [449.327506] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [449.327820] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [449.327951] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [449.327975] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [449.332467] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [449.396987] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [449.397793] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [449.405023] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [449.406594] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [449.407447] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [449.408339] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [449.409038] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [449.409757] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [449.504905] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [449.505319] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [449.506053] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [449.507059] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [449.508121] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [449.509213] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [449.510032] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [449.510321] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [449.510500] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [449.510721] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [449.510913] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [449.511247] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [449.511971] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [449.512186] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [449.518442] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [449.518541] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [449.519702] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [449.521776] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [449.524258] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [449.555067] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [449.555078] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [449.555082] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [449.555085] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [449.555301] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [449.555429] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [449.555757] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [449.555890] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [449.555914] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [449.561212] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [449.628921] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [449.629183] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [449.633584] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [449.634935] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [449.635184] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [449.635477] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [449.635642] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [449.635836] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [449.737170] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0 <4> [449.737192] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [449.737200] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [449.737208] nvme 0000:01:00.0: [ 0] RxErr (First) <7> [449.737860] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [449.738300] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [449.739005] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [449.739717] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [449.740438] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [449.741271] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [449.742066] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [449.742819] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [449.743500] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [449.744276] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [449.744942] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [449.745749] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [449.747973] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [449.748593] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [449.758990] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [449.759176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [449.759758] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [449.760521] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [449.764377] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [449.794391] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [449.794401] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [449.794405] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [449.794408] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [449.794613] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [449.795235] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [449.795561] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [449.795702] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [449.795725] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [449.800189] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [449.868974] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [449.869551] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [449.875575] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [449.877164] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [449.877959] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [449.878808] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [449.879434] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [449.880264] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [449.975904] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [449.976328] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [449.977057] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [449.977754] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [449.978479] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [449.979255] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [449.979999] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [449.980727] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [449.981413] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [449.981745] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [449.981880] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [449.982129] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [449.982819] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [449.982953] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [449.989108] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [449.989212] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [449.989492] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [449.991567] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [449.994066] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [450.024989] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [450.025000] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [450.025003] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [450.025006] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [450.025209] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [450.025333] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [450.025642] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [450.026125] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [450.026149] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [450.031012] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [450.101059] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [450.101852] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [450.107781] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [450.109298] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [450.110128] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [450.110973] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [450.111598] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [450.112349] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [450.207933] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [450.208350] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [450.209085] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [450.209795] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [450.210515] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [450.211289] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [450.212024] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [450.212761] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [450.213447] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [450.214241] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [450.214897] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [450.215643] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [450.217935] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [450.218561] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [450.227762] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [450.227959] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [450.228588] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [450.228849] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [450.233491] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [450.263850] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [450.263860] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [450.263864] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [450.263867] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [450.264075] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [450.264244] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [450.264560] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [450.264688] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [450.264726] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [450.269123] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [450.332806] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [450.333581] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [450.339578] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [450.340972] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [450.341212] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [450.341496] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [450.341633] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [450.341821] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [450.445590] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [450.446114] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [450.446814] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [450.447500] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [450.448262] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [450.449026] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [450.449770] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [450.450487] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [450.451083] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [450.451339] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [450.451478] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [450.451730] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [450.452410] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [450.452547] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [450.459947] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [450.460046] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [450.460320] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [450.461216] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [450.464849] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [450.494386] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [450.494396] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [450.494399] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [450.494403] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [450.494612] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [450.495436] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [450.495753] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [450.495884] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [450.495907] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [450.500360] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [450.565011] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [450.565824] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [450.571755] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [450.573298] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [450.574111] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [450.574958] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [450.575583] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [450.576309] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [450.665595] [IGT] i915_pm_rpm: finished subtest smem0, SUCCESS <6> [450.667253] [IGT] i915_pm_rpm: starting dynamic subtest extra-wait-smem0 <7> [450.667661] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [450.679792] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [450.679886] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [450.680033] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [450.680207] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [450.680429] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [450.680636] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [450.680881] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [450.681080] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [450.681265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [450.681510] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [450.681646] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [450.682053] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [450.682747] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [450.682908] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [450.689128] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [450.689314] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [450.689662] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [450.692905] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A] <7> [450.694266] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [450.723878] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [450.723887] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [450.723890] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [450.723894] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [450.724090] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [450.724212] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [450.724518] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [450.724645] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [450.725110] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [450.726202] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [450.727651] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B] <7> [450.727614] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [450.731946] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [450.736367] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C] <7> [450.797160] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [450.797939] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [450.798610] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [450.800441] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [450.801157] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [450.808295] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [450.809932] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [450.810767] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [450.811763] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [450.812339] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [450.813001] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [450.849956] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [450.850376] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [450.851104] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [450.851815] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [450.852545] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [450.853326] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [450.854067] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [450.854801] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [450.855480] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [450.856258] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [450.856908] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [450.857651] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [450.859913] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [450.860533] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [450.869666] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [450.869930] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [450.870769] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [450.873102] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [450.875601] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [450.906391] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [450.906401] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [450.906404] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [450.906408] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [450.906608] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [450.906740] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [450.907791] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [450.907921] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [450.907945] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [450.912451] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [450.981156] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [450.981971] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [450.987956] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [450.989758] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [450.990551] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [450.991447] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [450.992258] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [450.993022] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [453.853490] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [453.868159] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [453.868886] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [453.869545] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [453.870283] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [453.871035] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [453.871780] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [453.872556] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [453.873306] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [453.873663] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [453.874302] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [453.874441] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [453.874821] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [453.875532] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [453.875670] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [453.883114] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [453.883267] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [453.888240] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [453.918574] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [453.918584] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [453.918588] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [453.918594] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [453.918822] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [453.918984] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [453.919304] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [453.919432] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [453.919456] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [453.923850] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [453.929323] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [453.933789] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [453.963509] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [453.963517] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [453.963521] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [453.963524] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [453.963724] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [453.963845] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [453.964861] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [453.964991] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [453.965012] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [453.969537] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [453.974402] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [453.974587] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [453.978034] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [453.979384] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [453.979643] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [453.979934] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [453.980075] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [453.980248] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [456.090395] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [456.090813] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [456.091612] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [456.093417] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [456.094368] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [456.095131] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [456.095846] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [456.096198] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [456.096377] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [456.096620] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [456.096758] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [456.097005] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [456.097690] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [456.097826] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [456.102844] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [456.102942] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [456.103282] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [456.104123] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [456.107758] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [456.139847] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [456.139858] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [456.139861] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [456.139865] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [456.140080] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [456.140274] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [456.140648] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [456.140813] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [456.140838] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [456.145929] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [456.213369] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [456.214192] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [456.218943] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [456.220270] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [456.220504] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [456.220788] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [456.220925] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [456.221126] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [461.319236] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [461.319757] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [461.320454] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [461.321137] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [461.321954] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [461.322796] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [461.323585] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [461.324357] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [461.324934] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [461.325201] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [461.325335] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [461.325649] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [461.326326] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [461.326484] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [461.333879] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [461.333976] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [461.334311] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [461.334449] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [461.338930] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [461.372147] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [461.372158] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [461.372161] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [461.372165] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [461.372388] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [461.373480] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [461.373790] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [461.373919] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [461.373942] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [461.378309] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [461.437672] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [461.438492] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [461.444431] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [461.445950] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [461.446782] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [461.447634] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [461.448262] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [461.448998] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [464.093817] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [464.105862] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [464.106280] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [464.107023] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [464.107791] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [464.108525] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [464.109374] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [464.110159] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [464.110960] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [464.111521] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [464.111778] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [464.111914] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [464.112506] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [464.113229] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [464.113374] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [464.120808] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [464.120898] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [464.125724] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [464.158922] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [464.158932] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [464.158935] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [464.158938] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [464.159147] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [464.159276] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [464.159579] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [464.159726] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [464.159763] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [464.165007] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [464.169926] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [464.174765] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [464.206859] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [464.206867] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [464.206871] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [464.206874] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [464.207072] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [464.207195] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [464.207494] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [464.207621] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [464.207656] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [464.212907] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [464.217752] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [464.217940] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [464.221386] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [464.222754] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [464.222989] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [464.223275] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [464.223413] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [464.223586] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [466.549195] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [466.549620] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [466.550349] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [466.551071] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [466.551823] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [466.552610] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [466.553357] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [466.553730] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [466.553907] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [466.554183] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [466.554317] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [466.554570] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [466.555263] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [466.555400] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [466.561559] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [466.561660] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [466.561941] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [466.564010] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [466.566524] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [466.608498] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [466.608509] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [466.608512] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [466.608516] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [466.608726] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [466.609839] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [466.610150] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [466.611042] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [466.611066] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [466.615848] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [466.670201] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [466.670955] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [466.676994] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [466.678350] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [466.678592] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [466.678876] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [466.679026] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [466.679214] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [471.781920] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [471.782341] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [471.783037] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [471.783859] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [471.784694] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [471.785568] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [471.786331] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [471.787078] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [471.787316] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [471.787560] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [471.787694] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [471.788036] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [471.788728] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [471.788875] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [471.795074] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [471.795190] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [471.795471] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [471.796370] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [471.800003] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [471.830713] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [471.830723] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [471.830727] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [471.830730] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [471.830946] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [471.831077] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [471.831381] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [471.831511] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [471.831535] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [471.836864] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [471.903136] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [471.903955] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [471.909845] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [471.911256] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [471.911530] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [471.911813] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [471.911965] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [471.912140] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [474.335427] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [474.347418] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [474.347829] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [474.348568] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [474.349340] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [474.350068] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [474.350917] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [474.351702] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [474.352477] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [474.352915] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [474.353170] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [474.353320] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [474.353851] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [474.354556] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [474.354705] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [474.362089] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [474.362180] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [474.367040] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [474.397922] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [474.397932] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [474.397935] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [474.397938] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [474.398139] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [474.398270] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [474.399349] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [474.399480] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [474.399503] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [474.403976] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [474.408840] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [474.413734] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [474.444890] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [474.444898] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [474.444902] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [474.444905] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [474.445108] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [474.445229] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [474.445856] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [474.445988] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [474.446009] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [474.450536] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [474.455435] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [474.455589] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [474.459084] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [474.460433] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [474.460669] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [474.460997] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [474.461192] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [474.461383] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [477.012923] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [477.013348] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [477.014073] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [477.015104] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [477.016200] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [477.017317] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [477.018417] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [477.018727] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [477.018992] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [477.019279] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [477.019477] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [477.019820] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [477.020587] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [477.020830] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [477.027071] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [477.027168] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [477.027455] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [477.028416] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [477.032025] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [477.077508] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [477.077519] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [477.077522] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [477.077525] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [477.078736] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [477.078938] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [477.079973] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [477.080167] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [477.080210] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [477.084860] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [477.136196] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [477.137021] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [477.142938] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [477.144327] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [477.144579] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [477.144876] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [477.145015] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [477.145188] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [482.244848] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [482.245273] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [482.246011] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [482.246817] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [482.247680] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [482.248446] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [482.249237] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [482.250007] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [482.250188] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [482.250445] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [482.250583] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [482.250901] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [482.251575] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [482.251744] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [482.259165] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [482.259360] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [482.259888] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [482.260706] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [482.264483] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [482.294663] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [482.294673] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [482.294677] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [482.294680] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [482.295293] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [482.295418] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [482.296514] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [482.296660] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [482.296689] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [482.301398] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [482.369093] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [482.369901] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [482.375788] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [482.377189] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [482.377434] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [482.377729] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [482.377905] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [482.378078] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [484.577327] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [484.589289] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [484.589701] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [484.590453] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [484.591239] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [484.591988] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [484.592829] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [484.593620] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [484.594426] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [484.594906] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [484.595127] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [484.595264] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [484.595551] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [484.596255] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [484.596395] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [484.601412] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [484.601506] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [484.606274] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [484.637095] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [484.637105] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [484.637109] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [484.637112] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [484.638288] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [484.638417] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [484.638727] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [484.638858] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [484.638880] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [484.643114] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [484.648016] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [484.652880] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [484.683740] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [484.683748] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [484.683751] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [484.683754] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [484.683952] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [484.684075] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [484.685152] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [484.685282] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [484.685302] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [484.689815] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [484.694678] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [484.694860] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [484.698336] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [484.699691] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [484.699995] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [484.700296] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [484.700437] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [484.700619] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [484.801212] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0 <4> [484.801233] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [484.801242] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [484.801250] nvme 0000:01:00.0: [ 0] RxErr (First) <7> [487.477657] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [487.478082] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [487.478781] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [487.479467] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [487.480269] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [487.481036] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [487.481773] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [487.482485] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [487.483109] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [487.483362] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [487.483497] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [487.483860] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [487.484550] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [487.484710] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [487.493351] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [487.493572] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [487.494184] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [487.494814] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [487.498777] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [487.530828] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [487.530838] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [487.530842] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [487.530845] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [487.531050] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [487.531177] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [487.531485] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [487.531629] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [487.531652] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [487.536965] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [487.601887] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [487.603504] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [487.607076] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [487.608429] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [487.608726] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [487.609022] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [487.609162] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [487.609341] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [492.711827] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [492.712251] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [492.713000] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [492.713992] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [492.715055] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [492.716011] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [492.716752] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [492.717182] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [492.717362] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [492.717606] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [492.717769] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [492.718034] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [492.718730] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [492.718867] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [492.725069] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [492.725167] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [492.725449] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [492.727536] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [492.729989] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [492.761523] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [492.761534] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [492.761538] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [492.761541] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [492.761753] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [492.761948] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [492.762320] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [492.762484] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [492.762509] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [492.766856] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [492.834976] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [492.835767] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [492.840516] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [492.841853] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [492.842095] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [492.842379] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [492.842517] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [492.842696] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [494.819285] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [494.832214] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [494.832631] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [494.833380] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [494.834183] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [494.834936] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [494.835772] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [494.836547] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [494.837326] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [494.838024] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [494.838328] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [494.838464] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [494.838736] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [494.839436] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [494.839574] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [494.844588] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [494.844682] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [494.849440] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [494.880285] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [494.880295] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [494.880298] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [494.880301] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [494.880513] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [494.880637] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [494.880939] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [494.881348] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [494.881381] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [494.886302] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [494.891168] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [494.896039] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [494.926798] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [494.926807] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [494.926810] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [494.926814] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [494.927015] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [494.927974] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [494.928299] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [494.928431] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [494.928453] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [494.932859] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [494.937720] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [494.937901] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [494.941354] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [494.942701] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [494.942956] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [494.943249] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [494.943388] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [494.943561] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [497.944871] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [497.945292] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [497.946053] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [497.947067] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [497.948135] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [497.949220] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [497.950029] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [497.950227] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [497.950406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [497.950650] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [497.950801] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [497.951050] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [497.951743] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [497.951879] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [497.965367] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [497.965480] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [497.965684] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [497.965877] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [497.970321] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [498.002253] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [498.002263] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [498.002267] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [498.002270] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [498.002471] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [498.002597] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [498.003634] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [498.004746] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [498.004793] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [498.010719] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [498.076229] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [498.077073] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [498.084227] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [498.085769] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [498.086548] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [498.087453] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [498.088152] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [498.088875] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [503.173789] [IGT] i915_pm_rpm: finished subtest extra-wait-smem0, SUCCESS <6> [503.175783] [IGT] i915_pm_rpm: finished subtest gem-execbuf-stress, SUCCESS <7> [503.179020] i915 0000:00:02.0: [drm:compute_baseline_pipe_bpp [i915]] [CONNECTOR:400:HDMI-A-2] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [503.179216] i915 0000:00:02.0: [drm:intel_hdmi_compute_output_format [i915]] picking 8 bpc for HDMI output (pipe bpp: 24) <7> [503.179358] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [503.179513] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:399:DDI TC1/PHY C] [CRTC:151:pipe A] <7> [503.179658] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [503.179827] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [503.179976] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [503.180127] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [503.180263] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040) <7> [503.180399] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [503.180533] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920) <7> [503.180668] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2360) <7> [503.180818] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920) <7> [503.180967] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2360) <7> [503.181099] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008) <7> [503.181236] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2096) <7> [503.181366] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080) <7> [503.181496] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080) <7> [503.181627] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084) <7> [503.181766] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089) <7> [503.181916] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125) <7> [503.182050] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125) <7> [503.182183] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920) <7> [503.182314] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2360) <7> [503.182447] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920) <7> [503.182582] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2360) <7> [503.182714] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008) <7> [503.182905] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2096) <7> [503.183052] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080) <7> [503.183187] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080) <7> [503.183320] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084) <7> [503.183451] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089) <7> [503.183582] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125) <7> [503.183715] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125) <7> [503.183878] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [503.184012] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1) <7> [503.184145] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4) <7> [503.184278] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [503.184414] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 139929) <7> [503.184550] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 139929) <7> [503.184687] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 0, found 139929) <7> [503.184832] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [503.184994] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no <7> [503.185128] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1 <7> [503.185263] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 2016), size 0 -> 2016 <7> [503.185394] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (2016 - 2048), size 0 -> 32 <7> [503.185526] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [503.185659] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 <7> [503.185806] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 <7> [503.185938] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 <7> [503.186087] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 559716 num active planes 1 <7> [503.186224] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 560 <7> [503.186359] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [503.186507] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 0 kHz -> 69965 kHz <7> [503.186658] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 8746 kHz <7> [503.186993] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:151:pipe A] allocated DPLL 0 <7> [503.187134] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:151:pipe A] reserving DPLL 0 <7> [503.187274] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: yes [modeset] <7> [503.187410] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [503.187544] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7> [503.187683] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [503.187828] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [503.187965] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [503.188100] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [503.188233] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7> [503.188368] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2 <7> [503.188502] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [503.188634] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 42, guardband: 44 vsync start: 0, vsync end: 0 <7> [503.188775] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1125, vmax vtotal: 1125 <7> [503.188950] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [503.189081] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [503.189212] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [503.189344] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [503.189475] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 53 139929 1920 2008 2096 2360 1080 1084 1089 1125 0x40 0x5 <7> [503.189605] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [503.189752] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 139929, pixel rate 139929, min cdclk 69965, min voltage level 0 <7> [503.189902] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 135, ips linetime: 0 <7> [503.190035] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0 <7> [503.190165] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 1920x1080+0+0 <7> [503.190297] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [503.190429] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [503.190560] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [503.190692] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [503.190847] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [503.191005] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [503.191132] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [503.191260] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [503.191388] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [503.191516] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [503.191643] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [503.191797] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [503.191938] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [503.192066] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [503.192194] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [503.192321] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [503.192449] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:416] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [503.192578] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [503.192708] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [503.192879] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7> [503.193036] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7> [503.193168] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7> [503.193300] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7> [503.193431] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no <7> [503.205075] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [503.205199] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [503.205402] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [503.205700] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [503.206081] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [503.206429] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [503.206805] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [503.207250] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [503.207568] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [503.208229] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [503.208468] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [503.209086] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [503.209951] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [503.210142] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [503.218773] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [503.219235] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [503.219379] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [503.220129] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [503.221808] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [503.221963] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI B/PHY B] <7> [503.222102] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:399:DDI TC1/PHY C] <7> [503.222241] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DDI TC2/PHY D] <7> [503.222376] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST A] <7> [503.222511] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST B] <7> [503.222644] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DP-MST C] <7> [503.222830] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3 <7> [503.223083] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A] <7> [503.223221] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [503.223417] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_TC1 <7> [503.223594] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [503.224432] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1 <7> [503.224574] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:35:plane 1A] <7> [503.243654] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:400:HDMI-A-2] <7> [503.243896] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A] <7> [503.244578] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [503.244597] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <6> [503.245489] [IGT] i915_pm_rpm: exiting, ret=0 <7> [503.248801] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [503.274516] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [503.274526] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [503.274529] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [503.274532] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [503.274734] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [503.274872] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [503.275197] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [503.275326] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <6> [503.281591] Console: switching to colour frame buffer device 240x67 <7> [503.281511] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [503.285781] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [446.673020] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]

<7> [446.673028] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [446.677262] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected

<7> [446.677313] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2]

<7> [446.677319] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [446.703039] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [446.703049] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [446.703052] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [446.703055] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [446.703260] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [446.703392] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [446.703718] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [446.703847] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [446.704217] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH)

<7> [446.704224] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [446.704230] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [446.704236] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] probed modes:

<7> [446.704239] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [446.704242] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5

<7> [446.704245] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa

<7> [446.704248] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa

<7> [446.704250] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa

<7> [446.704253] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa

<7> [446.704256] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa

<7> [446.704259] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [446.704261] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6

<7> [446.704264] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [446.704267] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [446.704270] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6

<7> [446.704273] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa

<7> [446.704275] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [446.704278] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5

<7> [446.704281] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [446.704284] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [446.704286] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [446.704289] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5

<7> [446.704292] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [446.704294] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [446.704297] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [446.704300] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6

<7> [446.704303] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa

<7> [446.704305] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5

<7> [446.704308] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [446.704311] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa

<7> [446.704314] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [446.704316] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [446.704319] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [446.704322] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6

<7> [446.704370] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1]

<7> [446.704373] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [446.708565] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected

<7> [446.708601] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3]

<7> [446.708604] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [446.712799] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected

<7> [446.717434] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]

<7> [446.717439] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [446.721625] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected

<7> [446.722002] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1]

<7> [446.722006] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [446.726181] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected

<7> [446.726424] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3]

<7> [446.726427] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [446.730604] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected

<7> [446.730867] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]

<7> [446.730871] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [446.735086] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected

<7> [446.735098] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2]

<7> [446.735102] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [446.760748] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [446.760755] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [446.760759] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [446.760762] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [446.760958] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [446.761080] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [446.761388] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [446.761512] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [446.761889] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH)

<7> [446.761895] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [446.761901] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [446.761907] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] probed modes:

<7> [446.761910] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [446.761913] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5

<7> [446.761916] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa

<7> [446.761919] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa

<7> [446.761921] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa

<7> [446.761924] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa

<7> [446.761927] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa

<7> [446.761930] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [446.761933] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6

<7> [446.761935] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [446.761938] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [446.761941] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6

<7> [446.761944] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa

<7> [446.761946] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [446.761949] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5

<7> [446.761952] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [446.761955] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [446.761957] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [446.761960] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5

<7> [446.761963] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [446.761966] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [446.761968] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [446.761971] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6

<7> [446.761974] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa

<7> [446.761977] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5

<7> [446.761979] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [446.761982] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa

<7> [446.761985] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [446.761988] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [446.761990] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [446.761993] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6

<7> [446.762014] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1]

<7> [446.762018] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [446.766226] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected

<7> [446.766238] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3]

<7> [446.766241] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [446.770425] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected

<7> [447.785802] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A]

<7> [447.786096] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [447.786811] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [447.787443] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [447.788107] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [447.788763] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000)

<7> [447.789391] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [447.790063] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)

<7> [447.790221] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2360, found 0)

<7> [447.790354] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)

<7> [447.790486] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2360, found 0)

<7> [447.790618] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0)

<7> [447.790761] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2096, found 0)

<7> [447.790891] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)

<7> [447.791023] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)

<7> [447.791154] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0)

<7> [447.791285] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0)

<7> [447.791417] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0)

<7> [447.791546] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0)

<7> [447.791689] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)

<7> [447.791819] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2360, found 0)

<7> [447.791950] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)

<7> [447.792081] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2360, found 0)

<7> [447.792213] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0)

<7> [447.792346] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2096, found 0)

<7> [447.792477] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)

<7> [447.792608] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)

<7> [447.792751] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0)

<7> [447.792881] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0)

<7> [447.793017] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0)

<7> [447.793147] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0)

<7> [447.793279] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [447.793409] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)

<7> [447.793544] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)

<7> [447.793693] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [447.793828] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 139929, found 0)

<7> [447.793962] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 139929, found 0)

<7> [447.794095] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 139929, found 0)

<7> [447.794228] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [447.794362] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:151:pipe A] releasing DPLL 0

<7> [447.794519] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no

<7> [447.794658] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [447.794813] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 2016) -> ( 0 - 0), size 2016 -> 0

<7> [447.794946] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb (2016 - 2048) -> ( 0 - 0), size 32 -> 0

<7> [447.795077] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [447.795206] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [447.795335] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [447.795464] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [447.795609] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0

<7> [447.795766] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0

<7> [447.795903] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [447.796056] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 69965 kHz -> 0 kHz

<7> [447.796207] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 8746 kHz -> 0 kHz

<7> [447.796344] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: no [modeset]

<7> [447.796481] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no

<7> [447.796616] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no

<7> [447.796764] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no

<7> [447.796899] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no

<7> [447.797034] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no

<7> [447.797167] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no

<7> [447.808633] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [447.827814] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_TC1

<7> [447.828509] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A]

<7> [447.829311] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [447.830028] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:35:plane 1A]

<7> [447.830714] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI B/PHY B]

<7> [447.831346] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:399:DDI TC1/PHY C]

<7> [447.832057] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DDI TC2/PHY D]

<7> [447.832695] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST A]

<7> [447.833257] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST B]

<7> [447.833874] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DP-MST C]

<7> [447.834438] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [447.835284] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [447.835921] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [447.836481] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A]

<7> [447.837779] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B]

<7> [447.838119] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C]

<7> [447.941036] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [447.941795] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [447.942442] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [447.944262] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [447.944975] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [447.948453] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [447.949806] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [447.950033] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [447.950313] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [447.950451] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [447.950623] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [448.042466] [IGT] i915_pm_rpm: starting subtest gem-execbuf-stress

<7> [448.061032] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [448.061766] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [448.062449] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [448.063280] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [448.064251] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [448.065100] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [448.065856] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [448.066572] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [448.067576] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [448.070330] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [448.071045] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [448.072467] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [448.074550] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [448.075131] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [448.087709] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [448.088137] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [448.088358] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [448.092855] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [448.100489] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A]

<7> [448.122441] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [448.122451] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [448.122454] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [448.122458] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [448.122681] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [448.122808] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [448.123118] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [448.123250] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [448.123277] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [448.128513] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [448.133677] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [448.134508] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [448.135965] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B]

<7> [448.136088] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C]

<7> [448.229043] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [448.229858] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [448.230508] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [448.232349] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [448.233062] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [448.238947] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [448.240448] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [448.241250] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [448.242098] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [448.242741] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [448.243433] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [448.348919] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [448.349348] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [448.350072] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [448.350916] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [448.351745] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [448.352224] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [448.352423] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [448.352620] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [448.352815] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [448.353070] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [448.353205] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [448.353819] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [448.354522] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [448.354675] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [448.360888] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [448.360991] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [448.361682] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [448.363773] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [448.366365] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [448.396009] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [448.396020] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [448.396024] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [448.396027] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [448.396232] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [448.396360] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [448.396679] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [448.396814] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [448.396838] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [448.402070] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [448.469147] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [448.469970] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<6> [448.473639] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0

<4> [448.473674] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [448.473682] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [448.475888] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [448.477239] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [448.477484] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [448.477783] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [448.477923] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [448.478097] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [448.577348] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [448.577840] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [448.578515] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [448.579272] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [448.580350] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [448.581453] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [448.582343] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [448.583015] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [448.583193] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [448.583437] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [448.583572] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [448.584122] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [448.584826] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [448.584967] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [448.592384] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [448.592498] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [448.592841] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [448.593042] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [448.597358] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [448.628040] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [448.628050] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [448.628054] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [448.628057] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [448.628264] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [448.628394] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [448.628738] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [448.628935] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [448.628978] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [448.634204] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [448.700931] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [448.701759] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [448.708972] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [448.710551] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [448.711410] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [448.712316] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [448.713013] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [448.715024] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [448.807910] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [448.808338] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [448.809098] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [448.809888] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [448.810630] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [448.811466] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [448.812240] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [448.813023] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [448.813766] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [448.814521] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [448.815157] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [448.815487] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [448.816188] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [448.816325] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [448.823716] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [448.823858] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [448.824334] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [448.824499] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [448.829090] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [448.860007] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [448.860017] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [448.860021] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [448.860024] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [448.860222] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [448.860351] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [448.860655] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [448.861156] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [448.861213] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [448.866036] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [448.933042] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [448.933844] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [448.939741] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [448.941120] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [448.941405] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [448.941698] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [448.941836] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [448.942010] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [449.040882] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [449.041308] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [449.042036] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [449.042743] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [449.043466] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [449.044232] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [449.044999] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [449.045729] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [449.046421] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [449.047225] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [449.047905] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [449.048690] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [449.050958] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [449.051581] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [449.061971] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [449.062218] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [449.062709] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [449.063408] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [449.067293] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [449.097939] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [449.097949] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [449.097953] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [449.097956] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [449.098161] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [449.098287] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [449.098597] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [449.099121] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [449.099144] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [449.104063] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [449.173103] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [449.173915] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [449.179846] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [449.181230] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [449.181466] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [449.181766] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [449.181904] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [449.182078] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [449.279245] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [449.279666] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [449.280439] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [449.281270] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [449.282060] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [449.282338] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [449.282538] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [449.282777] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [449.282957] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [449.283211] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [449.283346] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [449.283594] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [449.284303] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [449.284442] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [449.289459] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [449.289560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [449.289852] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [449.290456] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [449.294316] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [449.326348] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [449.326358] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [449.326362] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [449.326365] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [449.326568] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [449.327506] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [449.327820] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [449.327951] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [449.327975] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [449.332467] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [449.396987] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [449.397793] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [449.405023] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [449.406594] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [449.407447] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [449.408339] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [449.409038] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [449.409757] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [449.504905] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [449.505319] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [449.506053] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [449.507059] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [449.508121] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [449.509213] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [449.510032] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [449.510321] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [449.510500] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [449.510721] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [449.510913] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [449.511247] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [449.511971] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [449.512186] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [449.518442] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [449.518541] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [449.519702] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [449.521776] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [449.524258] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [449.555067] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [449.555078] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [449.555082] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [449.555085] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [449.555301] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [449.555429] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [449.555757] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [449.555890] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [449.555914] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [449.561212] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [449.628921] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [449.629183] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [449.633584] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [449.634935] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [449.635184] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [449.635477] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [449.635642] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [449.635836] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [449.737170] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0

<4> [449.737192] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [449.737200] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [449.737860] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [449.738300] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [449.739005] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [449.739717] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [449.740438] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [449.741271] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [449.742066] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [449.742819] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [449.743500] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [449.744276] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [449.744942] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [449.745749] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [449.747973] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [449.748593] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [449.758990] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [449.759176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [449.759758] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [449.760521] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [449.764377] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [449.794391] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [449.794401] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [449.794405] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [449.794408] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [449.794613] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [449.795235] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [449.795561] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [449.795702] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [449.795725] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [449.800189] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [449.868974] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [449.869551] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [449.875575] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [449.877164] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [449.877959] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [449.878808] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [449.879434] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [449.880264] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [449.975904] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [449.976328] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [449.977057] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [449.977754] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [449.978479] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [449.979255] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [449.979999] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [449.980727] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [449.981413] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [449.981745] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [449.981880] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [449.982129] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [449.982819] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [449.982953] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [449.989108] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [449.989212] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [449.989492] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [449.991567] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [449.994066] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [450.024989] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [450.025000] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [450.025003] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [450.025006] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [450.025209] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [450.025333] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [450.025642] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [450.026125] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [450.026149] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [450.031012] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [450.101059] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [450.101852] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [450.107781] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [450.109298] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [450.110128] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [450.110973] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [450.111598] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [450.112349] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [450.207933] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [450.208350] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [450.209085] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [450.209795] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [450.210515] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [450.211289] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [450.212024] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [450.212761] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [450.213447] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [450.214241] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [450.214897] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [450.215643] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [450.217935] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [450.218561] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [450.227762] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [450.227959] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [450.228588] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [450.228849] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [450.233491] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [450.263850] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [450.263860] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [450.263864] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [450.263867] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [450.264075] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [450.264244] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [450.264560] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [450.264688] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [450.264726] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [450.269123] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [450.332806] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [450.333581] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [450.339578] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [450.340972] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [450.341212] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [450.341496] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [450.341633] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [450.341821] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [450.445590] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [450.446114] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [450.446814] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [450.447500] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [450.448262] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [450.449026] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [450.449770] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [450.450487] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [450.451083] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [450.451339] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [450.451478] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [450.451730] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [450.452410] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [450.452547] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [450.459947] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [450.460046] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [450.460320] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [450.461216] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [450.464849] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [450.494386] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [450.494396] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [450.494399] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [450.494403] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [450.494612] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [450.495436] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [450.495753] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [450.495884] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [450.495907] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [450.500360] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [450.565011] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [450.565824] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [450.571755] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [450.573298] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [450.574111] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [450.574958] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [450.575583] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [450.576309] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [450.667253] [IGT] i915_pm_rpm: starting dynamic subtest extra-wait-smem0

<7> [450.679792] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [450.679886] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [450.680033] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [450.680207] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [450.680429] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [450.680636] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [450.680881] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [450.681080] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [450.681265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [450.681510] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [450.681646] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [450.682053] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [450.682747] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [450.682908] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [450.689128] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [450.689314] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [450.689662] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [450.692905] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A]

<7> [450.694266] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [450.723878] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [450.723887] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [450.723890] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [450.723894] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [450.724090] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [450.724212] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [450.724518] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [450.724645] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [450.725110] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [450.726202] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [450.727651] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B]

<7> [450.727614] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [450.731946] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [450.736367] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C]

<7> [450.797160] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [450.797939] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [450.798610] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [450.800441] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [450.801157] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [450.808295] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [450.809932] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [450.810767] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [450.811763] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [450.812339] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [450.813001] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [450.849956] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [450.850376] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [450.851104] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [450.851815] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [450.852545] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [450.853326] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [450.854067] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [450.854801] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [450.855480] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [450.856258] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [450.856908] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [450.857651] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [450.859913] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [450.860533] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [450.869666] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [450.869930] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [450.870769] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [450.873102] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [450.875601] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [450.906391] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [450.906401] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [450.906404] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [450.906408] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [450.906608] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [450.906740] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [450.907791] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [450.907921] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [450.907945] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [450.912451] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [450.981156] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [450.981971] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [450.987956] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [450.989758] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [450.990551] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [450.991447] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [450.992258] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [450.993022] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [453.853490] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [453.868159] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [453.868886] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [453.869545] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [453.870283] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [453.871035] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [453.871780] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [453.872556] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [453.873306] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [453.873663] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [453.874302] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [453.874441] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [453.874821] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [453.875532] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [453.875670] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [453.883114] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [453.883267] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [453.888240] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [453.918574] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [453.918584] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [453.918588] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [453.918594] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [453.918822] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [453.918984] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [453.919304] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [453.919432] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [453.919456] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [453.923850] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [453.929323] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [453.933789] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [453.963509] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [453.963517] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [453.963521] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [453.963524] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [453.963724] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [453.963845] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [453.964861] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [453.964991] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [453.965012] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [453.969537] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [453.974402] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [453.974587] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [453.978034] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [453.979384] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [453.979643] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [453.979934] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [453.980075] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [453.980248] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [456.090395] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [456.090813] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [456.091612] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [456.093417] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [456.094368] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [456.095131] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [456.095846] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [456.096198] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [456.096377] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [456.096620] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [456.096758] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [456.097005] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [456.097690] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [456.097826] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [456.102844] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [456.102942] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [456.103282] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [456.104123] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [456.107758] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [456.139847] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [456.139858] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [456.139861] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [456.139865] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [456.140080] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [456.140274] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [456.140648] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [456.140813] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [456.140838] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [456.145929] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [456.213369] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [456.214192] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [456.218943] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [456.220270] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [456.220504] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [456.220788] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [456.220925] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [456.221126] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [461.319236] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [461.319757] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [461.320454] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [461.321137] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [461.321954] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [461.322796] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [461.323585] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [461.324357] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [461.324934] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [461.325201] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [461.325335] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [461.325649] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [461.326326] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [461.326484] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [461.333879] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [461.333976] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [461.334311] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [461.334449] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [461.338930] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [461.372147] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [461.372158] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [461.372161] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [461.372165] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [461.372388] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [461.373480] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [461.373790] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [461.373919] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [461.373942] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [461.378309] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [461.437672] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [461.438492] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [461.444431] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [461.445950] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [461.446782] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [461.447634] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [461.448262] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [461.448998] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [464.093817] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [464.105862] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [464.106280] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [464.107023] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [464.107791] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [464.108525] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [464.109374] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [464.110159] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [464.110960] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [464.111521] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [464.111778] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [464.111914] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [464.112506] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [464.113229] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [464.113374] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [464.120808] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [464.120898] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [464.125724] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [464.158922] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [464.158932] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [464.158935] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [464.158938] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [464.159147] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [464.159276] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [464.159579] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [464.159726] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [464.159763] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [464.165007] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [464.169926] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [464.174765] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [464.206859] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [464.206867] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [464.206871] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [464.206874] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [464.207072] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [464.207195] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [464.207494] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [464.207621] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [464.207656] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [464.212907] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [464.217752] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [464.217940] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [464.221386] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [464.222754] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [464.222989] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [464.223275] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [464.223413] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [464.223586] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [466.549195] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [466.549620] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [466.550349] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [466.551071] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [466.551823] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [466.552610] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [466.553357] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [466.553730] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [466.553907] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [466.554183] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [466.554317] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [466.554570] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [466.555263] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [466.555400] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [466.561559] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [466.561660] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [466.561941] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [466.564010] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [466.566524] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [466.608498] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [466.608509] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [466.608512] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [466.608516] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [466.608726] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [466.609839] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [466.610150] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [466.611042] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [466.611066] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [466.615848] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [466.670201] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [466.670955] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [466.676994] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [466.678350] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [466.678592] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [466.678876] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [466.679026] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [466.679214] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [471.781920] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [471.782341] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [471.783037] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [471.783859] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [471.784694] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [471.785568] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [471.786331] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [471.787078] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [471.787316] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [471.787560] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [471.787694] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [471.788036] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [471.788728] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [471.788875] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [471.795074] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [471.795190] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [471.795471] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [471.796370] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [471.800003] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [471.830713] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [471.830723] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [471.830727] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [471.830730] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [471.830946] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [471.831077] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [471.831381] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [471.831511] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [471.831535] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [471.836864] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [471.903136] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [471.903955] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [471.909845] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [471.911256] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [471.911530] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [471.911813] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [471.911965] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [471.912140] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [474.335427] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [474.347418] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [474.347829] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [474.348568] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [474.349340] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [474.350068] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [474.350917] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [474.351702] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [474.352477] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [474.352915] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [474.353170] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [474.353320] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [474.353851] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [474.354556] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [474.354705] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [474.362089] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [474.362180] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [474.367040] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [474.397922] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [474.397932] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [474.397935] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [474.397938] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [474.398139] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [474.398270] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [474.399349] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [474.399480] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [474.399503] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [474.403976] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [474.408840] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [474.413734] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [474.444890] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [474.444898] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [474.444902] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [474.444905] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [474.445108] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [474.445229] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [474.445856] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [474.445988] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [474.446009] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [474.450536] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [474.455435] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [474.455589] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [474.459084] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [474.460433] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [474.460669] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [474.460997] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [474.461192] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [474.461383] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [477.012923] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [477.013348] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [477.014073] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [477.015104] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [477.016200] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [477.017317] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [477.018417] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [477.018727] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [477.018992] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [477.019279] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [477.019477] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [477.019820] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [477.020587] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [477.020830] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [477.027071] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [477.027168] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [477.027455] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [477.028416] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [477.032025] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [477.077508] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [477.077519] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [477.077522] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [477.077525] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [477.078736] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [477.078938] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [477.079973] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [477.080167] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [477.080210] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [477.084860] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [477.136196] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [477.137021] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [477.142938] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [477.144327] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [477.144579] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [477.144876] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [477.145015] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [477.145188] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [482.244848] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [482.245273] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [482.246011] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [482.246817] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [482.247680] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [482.248446] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [482.249237] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [482.250007] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [482.250188] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [482.250445] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [482.250583] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [482.250901] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [482.251575] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [482.251744] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [482.259165] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [482.259360] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [482.259888] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [482.260706] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [482.264483] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [482.294663] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [482.294673] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [482.294677] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [482.294680] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [482.295293] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [482.295418] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [482.296514] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [482.296660] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [482.296689] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [482.301398] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [482.369093] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [482.369901] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [482.375788] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [482.377189] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [482.377434] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [482.377729] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [482.377905] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [482.378078] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [484.577327] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [484.589289] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [484.589701] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [484.590453] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [484.591239] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [484.591988] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [484.592829] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [484.593620] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [484.594426] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [484.594906] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [484.595127] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [484.595264] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [484.595551] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [484.596255] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [484.596395] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [484.601412] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [484.601506] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [484.606274] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [484.637095] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [484.637105] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [484.637109] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [484.637112] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [484.638288] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [484.638417] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [484.638727] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [484.638858] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [484.638880] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [484.643114] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [484.648016] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [484.652880] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [484.683740] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [484.683748] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [484.683751] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [484.683754] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [484.683952] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [484.684075] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [484.685152] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [484.685282] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [484.685302] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [484.689815] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [484.694678] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [484.694860] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [484.698336] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [484.699691] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [484.699995] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [484.700296] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [484.700437] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [484.700619] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [484.801212] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0

<4> [484.801233] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [484.801242] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [487.477657] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [487.478082] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [487.478781] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [487.479467] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [487.480269] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [487.481036] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [487.481773] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [487.482485] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [487.483109] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [487.483362] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [487.483497] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [487.483860] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [487.484550] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [487.484710] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [487.493351] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [487.493572] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [487.494184] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [487.494814] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [487.498777] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [487.530828] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [487.530838] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [487.530842] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [487.530845] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [487.531050] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [487.531177] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [487.531485] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [487.531629] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [487.531652] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [487.536965] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [487.601887] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [487.603504] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [487.607076] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [487.608429] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [487.608726] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [487.609022] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [487.609162] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [487.609341] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [492.711827] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [492.712251] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [492.713000] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [492.713992] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [492.715055] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [492.716011] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [492.716752] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [492.717182] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [492.717362] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [492.717606] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [492.717769] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [492.718034] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [492.718730] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [492.718867] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [492.725069] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [492.725167] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [492.725449] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [492.727536] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [492.729989] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [492.761523] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [492.761534] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [492.761538] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [492.761541] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [492.761753] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [492.761948] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [492.762320] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [492.762484] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [492.762509] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [492.766856] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [492.834976] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [492.835767] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [492.840516] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [492.841853] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [492.842095] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [492.842379] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [492.842517] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [492.842696] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [494.819285] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [494.832214] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [494.832631] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [494.833380] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [494.834183] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [494.834936] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [494.835772] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [494.836547] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [494.837326] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [494.838024] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [494.838328] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [494.838464] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [494.838736] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [494.839436] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [494.839574] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [494.844588] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [494.844682] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [494.849440] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [494.880285] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [494.880295] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [494.880298] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [494.880301] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [494.880513] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [494.880637] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [494.880939] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [494.881348] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [494.881381] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [494.886302] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [494.891168] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [494.896039] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [494.926798] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [494.926807] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [494.926810] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [494.926814] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [494.927015] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [494.927974] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [494.928299] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [494.928431] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [494.928453] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [494.932859] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [494.937720] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [494.937901] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [494.941354] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [494.942701] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [494.942956] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [494.943249] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [494.943388] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [494.943561] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [497.944871] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [497.945292] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [497.946053] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [497.947067] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [497.948135] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [497.949220] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [497.950029] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [497.950227] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [497.950406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [497.950650] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [497.950801] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [497.951050] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [497.951743] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [497.951879] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [497.965367] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [497.965480] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [497.965684] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [497.965877] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [497.970321] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [498.002253] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [498.002263] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [498.002267] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [498.002270] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [498.002471] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [498.002597] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [498.003634] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [498.004746] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [498.004793] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [498.010719] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [498.076229] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [498.077073] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [498.084227] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [498.085769] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [498.086548] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [498.087453] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [498.088152] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [498.088875] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [503.173789] [IGT] i915_pm_rpm: finished subtest extra-wait-smem0, SUCCESS

<6> [503.175783] [IGT] i915_pm_rpm: finished subtest gem-execbuf-stress, SUCCESS

<7> [503.179020] i915 0000:00:02.0: [drm:compute_baseline_pipe_bpp [i915]] [CONNECTOR:400:HDMI-A-2] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [503.179216] i915 0000:00:02.0: [drm:intel_hdmi_compute_output_format [i915]] picking 8 bpc for HDMI output (pipe bpp: 24)

<7> [503.179358] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [503.179513] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:399:DDI TC1/PHY C] [CRTC:151:pipe A]

<7> [503.179658] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [503.179827] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [503.179976] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [503.180127] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [503.180263] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040)

<7> [503.180399] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [503.180533] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)

<7> [503.180668] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2360)

<7> [503.180818] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)

<7> [503.180967] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2360)

<7> [503.181099] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008)

<7> [503.181236] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2096)

<7> [503.181366] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)

<7> [503.181496] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)

<7> [503.181627] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084)

<7> [503.181766] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089)

<7> [503.181916] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125)

<7> [503.182050] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125)

<7> [503.182183] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)

<7> [503.182314] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2360)

<7> [503.182447] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)

<7> [503.182582] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2360)

<7> [503.182714] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008)

<7> [503.182905] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2096)

<7> [503.183052] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)

<7> [503.183187] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)

<7> [503.183320] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084)

<7> [503.183451] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089)

<7> [503.183582] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125)

<7> [503.183715] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125)

<7> [503.183878] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [503.184012] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)

<7> [503.184145] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)

<7> [503.184278] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [503.184414] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 139929)

<7> [503.184550] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 139929)

<7> [503.184687] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 0, found 139929)

<7> [503.184832] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [503.184994] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no

<7> [503.185128] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1

<7> [503.185263] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 2016), size 0 -> 2016

<7> [503.185394] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (2016 - 2048), size 0 -> 32

<7> [503.185526] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [503.185659] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0

<7> [503.185806] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0

<7> [503.185938] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0

<7> [503.186087] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 559716 num active planes 1

<7> [503.186224] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 560

<7> [503.186359] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [503.186507] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 0 kHz -> 69965 kHz

<7> [503.186658] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 8746 kHz

<7> [503.186993] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:151:pipe A] allocated DPLL 0

<7> [503.187134] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:151:pipe A] reserving DPLL 0

<7> [503.187274] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: yes [modeset]

<7> [503.187410] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [503.187544] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0

<7> [503.187683] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [503.187828] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [503.187965] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [503.188100] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [503.188233] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0

<7> [503.188368] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2

<7> [503.188502] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [503.188634] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 42, guardband: 44 vsync start: 0, vsync end: 0

<7> [503.188775] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1125, vmax vtotal: 1125

<7> [503.188950] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [503.189081] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [503.189212] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [503.189344] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [503.189475] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 53 139929 1920 2008 2096 2360 1080 1084 1089 1125 0x40 0x5

<7> [503.189605] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [503.189752] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 139929, pixel rate 139929, min cdclk 69965, min voltage level 0

<7> [503.189902] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 135, ips linetime: 0

<7> [503.190035] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0

<7> [503.190165] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 1920x1080+0+0

<7> [503.190297] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [503.190429] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [503.190560] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [503.190692] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [503.190847] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [503.191005] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [503.191132] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [503.191260] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [503.191388] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [503.191516] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [503.191643] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [503.191797] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [503.191938] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [503.192066] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [503.192194] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [503.192321] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [503.192449] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:416] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [503.192578] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [503.192708] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [503.192879] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no

<7> [503.193036] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no

<7> [503.193168] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no

<7> [503.193300] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no

<7> [503.193431] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no

<7> [503.205075] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [503.205199] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [503.205402] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [503.205700] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [503.206081] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [503.206429] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [503.206805] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [503.207250] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [503.207568] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [503.208229] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [503.208468] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [503.209086] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [503.209951] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [503.210142] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [503.218773] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [503.219235] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [503.219379] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [503.220129] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [503.221808] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [503.221963] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI B/PHY B]

<7> [503.222102] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:399:DDI TC1/PHY C]

<7> [503.222241] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DDI TC2/PHY D]

<7> [503.222376] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST A]

<7> [503.222511] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST B]

<7> [503.222644] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DP-MST C]

<7> [503.222830] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3

<7> [503.223083] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A]

<7> [503.223221] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [503.223417] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_TC1

<7> [503.223594] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [503.224432] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1

<7> [503.224574] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:35:plane 1A]

<7> [503.243654] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [503.243896] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A]

<7> [503.244578] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [503.244597] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [503.248801] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [503.274516] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [503.274526] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [503.274529] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [503.274532] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [503.274734] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [503.274872] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [503.275197] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [503.275326] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<6> [503.281591] Console: switching to colour frame buffer device 240x67

<7> [503.281511] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [503.285781] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

Results for igt@i915_pm_rpm@gem-execbuf-stress