Result:
git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0
| Detail | Value |
|---|---|
| Duration | 2.97 seconds |
| Igt-Version |
IGT-Version: 2.4-ga5c5d6558 (x86_64) (Linux: 7.0.0-CI_DRM_18361-g15ccea1aede9+ x86_64) |
| Out |
Using IGT_SRANDOM=1777032870 for randomisation
Starting subtest: basic-rte
Opened device: /dev/dri/card0
Runtime PM support: 1
PC8 residency support: 0
DMC: fw loaded: yes
i915_runtime_pm_status:
GPU idle: yes
IRQs disabled: no
Usage count: 1
PCI device power state: D0 [0]
ref_tracker: intel_runtime_pm@ffff888141279828 has 1/1 users at
track_intel_runtime_pm_wakeref+0x90/0xb0 [i915]
__intel_runtime_pm_get+0x60/0x130 [i915]
i915_display_rpm_get_raw+0x17/0x30 [i915]
intel_display_rpm_get_raw+0x20/0x30 [i915]
__intel_display_power_put_async+0x3a/0x1c0 [i915]
intel_atomic_commit_tail+0x1bb7/0x20c0 [i915]
intel_atomic_commit+0x2ff/0x350 [i915]
drm_atomic_commit+0xaf/0xf0
drm_atomic_helper_set_config+0x82/0xd0
drm_mode_setcrtc+0x548/0xa10
drm_ioctl_kernel+0xb3/0x120
drm_ioctl+0x2d4/0x5a0
__x64_sys_ioctl+0xa5/0x100
x64_sys_call+0x1250/0x26e0
do_syscall_64+0xdd/0x1440
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Subtest basic-rte: SUCCESS (2.971s)
i915_runtime_pm_status:
GPU idle: yes
IRQs disabled: no
Usage count: 3
PCI device power state: D0 [0]
ref_tracker: intel_runtime_pm@ffff888141279828 has 1/3 users at
track_intel_runtime_pm_wakeref+0x90/0xb0 [i915]
__intel_runtime_pm_get+0x60/0x130 [i915]
i915_display_rpm_get_raw+0x17/0x30 [i915]
intel_display_rpm_get_raw+0x20/0x30 [i915]
__intel_display_power_put_async+0x3a/0x1c0 [i915]
intel_atomic_commit_tail+0x1bb7/0x20c0 [i915]
intel_atomic_commit+0x2ff/0x350 [i915]
drm_atomic_commit+0xaf/0xf0
drm_atomic_helper_set_config+0x82/0xd0
drm_mode_setcrtc+0x548/0xa10
drm_ioctl_kernel+0xb3/0x120
drm_ioctl+0x2d4/0x5a0
__x64_sys_ioctl+0xa5/0x100
x64_sys_call+0x1250/0x26e0
do_syscall_64+0xdd/0x1440
entry_SYSCALL_64_after_hwframe+0x76/0x7e
ref_tracker: intel_runtime_pm@ffff888141279828 has 2/3 users at
track_intel_runtime_pm_wakeref+0x90/0xb0 [i915]
__intel_runtime_pm_get+0x60/0x130 [i915]
i915_display_rpm_get+0x1a/0x30 [i915]
intel_display_rpm_get+0x1f/0x30 [i915]
intel_display_power_get+0x22/0x70 [i915]
adlp_tc_phy_connect+0x166/0x2b0 [i915]
intel_tc_port_reset_mode+0x285/0x3b0 [i915]
__intel_tc_port_lock+0xe3/0x130 [i915]
intel_tc_port_lock+0x1a/0x30 [i915]
intel_digital_port_connected+0x33/0xa0 [i915]
intel_dp_detect+0xfc/0x810 [i915]
detect_connector_status+0x21/0x60
drm_helper_probe_detect_ctx+0x75/0xe0
drm_helper_probe_detect+0x7b/0x90
intel_hotplug_detect_connector+0x4b/0x140 [i915]
i915_hpd_poll_init_work+0x20b/0x2e0 [i915]
|
| Err |
Starting subtest: basic-rte Subtest basic-rte: SUCCESS (2.971s) |
| Dmesg |
<6> [228.742448] Console: switching to colour dummy device 80x25
<6> [228.742967] [IGT] kms_pm_rpm: executing
<6> [228.747403] [IGT] kms_pm_rpm: starting subtest basic-rte
<7> [228.747696] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [228.754166] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1]
<7> [228.754180] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-1]
<7> [228.758489] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1] disconnected
<7> [228.758853] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:408:DP-1]
<7> [228.758859] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:408:DP-1]
<7> [228.759229] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:408:DP-1] disconnected
<7> [228.759609] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-2]
<7> [228.759616] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:417:DP-2]
<7> [228.759963] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-2] disconnected
<7> [228.760441] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:eDP-1]
<7> [228.760447] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:390:eDP-1]
<7> [228.761058] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [228.761508] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [228.761707] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [228.761898] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [228.762151] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [228.762160] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [228.762166] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] ELD monitor
<7> [228.762171] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] ELD size 20, SAD count 0
<7> [228.762194] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:390:eDP-1] VRR capable: no
<7> [228.762402] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:390:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [228.762606] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:390:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [228.763175] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:eDP-1] probed modes:
<7> [228.763181] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [228.763186] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [228.763213] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1]
<7> [228.763219] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-1]
<7> [228.767509] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1] disconnected
<7> [228.767546] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:408:DP-1]
<7> [228.767553] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:408:DP-1]
<7> [228.767910] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:408:DP-1] disconnected
<7> [228.767929] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-2]
<7> [228.767934] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:417:DP-2]
<7> [228.768278] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-2] disconnected
<7> [228.768371] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:eDP-1]
<7> [228.768378] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:390:eDP-1]
<7> [228.769195] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [228.769770] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [228.770060] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [228.770395] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [228.770774] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [228.770786] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [228.770794] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] ELD monitor
<7> [228.770802] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] ELD size 20, SAD count 0
<7> [228.770838] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:390:eDP-1] VRR capable: no
<7> [228.771188] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:390:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [228.771536] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:390:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [228.772314] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:eDP-1] probed modes:
<7> [228.772326] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [228.772335] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [228.772439] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1]
<7> [228.772448] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-1]
<7> [228.776881] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1] disconnected
<7> [228.776949] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:408:DP-1]
<7> [228.776956] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:408:DP-1]
<7> [228.777326] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:408:DP-1] disconnected
<7> [228.777393] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-2]
<7> [228.777399] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:417:DP-2]
<7> [228.778062] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-2] disconnected
<7> [228.778750] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:424]
<7> [229.813361] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A]
<7> [229.813792] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected yes, found no)
<7> [229.814700] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no)
<7> [229.815501] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)
<7> [229.816186] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 4, found 0)
<7> [229.816829] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7843931/8388608 link 522928/524288, found tu 0, data 0/0 link 0/0)
<7> [229.817270] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [229.817491] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [229.817700] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3840, found 0)
<7> [229.817908] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 4000, found 0)
<7> [229.818115] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3840, found 0)
<7> [229.818333] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 4000, found 0)
<7> [229.818544] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3888, found 0)
<7> [229.818752] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3920, found 0)
<7> [229.818969] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 2160, found 0)
<7> [229.819186] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 2161, found 0)
<7> [229.819396] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 2163, found 0)
<7> [229.819603] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 2168, found 0)
<7> [229.819811] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 2244, found 0)
<7> [229.820023] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 2244, found 0)
<7> [229.820240] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3840, found 0)
<7> [229.820448] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 4000, found 0)
<7> [229.820655] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3840, found 0)
<7> [229.820861] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 4000, found 0)
<7> [229.821091] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3888, found 0)
<7> [229.821308] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3920, found 0)
<7> [229.821515] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 2160, found 0)
<7> [229.821722] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 2161, found 0)
<7> [229.821929] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 2163, found 0)
<7> [229.822155] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 2168, found 0)
<7> [229.822379] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 2244, found 0)
<7> [229.822591] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 2244, found 0)
<7> [229.822801] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [229.823033] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [229.823251] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [229.823464] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [229.823680] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 538600, found 0)
<7> [229.823896] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 538600, found 0)
<7> [229.824117] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)
<7> [229.824338] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in set_context_latency (expected 1, found 0)
<7> [229.824562] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset
<7> [229.824808] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:151:pipe A] releasing DPLL 0
<7> [229.825151] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no
<7> [229.825377] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0
<7> [229.825616] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 4027) -> ( 0 - 0), size 4027 -> 0
<7> [229.825834] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb (4027 - 4096) -> ( 0 - 0), size 69 -> 0
<7> [229.826053] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [229.826259] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [229.826452] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [229.826643] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [229.826860] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [229.827084] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10928 required 0
<7> [229.827304] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15758 required 0
<7> [229.827510] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 16388 required 0
<7> [229.827716] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 17250 required 0
<7> [229.827924] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 0
<7> [229.828147] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 40533 required 0
<7> [229.828370] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 0
<7> [229.828609] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 269300 kHz -> 0 kHz
<7> [229.828895] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 33663 kHz -> 0 kHz
<7> [229.829199] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change
<7> [229.829441] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 179200 kHz, actual 179200 kHz
<7> [229.829665] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0
<7> [229.829884] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: no [modeset]
<7> [229.830116] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no
<7> [229.830347] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no
<7> [229.830581] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no
<7> [229.830823] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no
<7> [229.831082] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no
<7> [229.831325] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no
<7> [229.831655] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [229.832624] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]
<7> [229.836993] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [229.837280] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [229.837523] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [229.837514] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [229.837765] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [229.838015] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [230.037226] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:390:eDP-1] set backlight PWM = 0
<7> [230.038343] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A
<7> [230.050069] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:389:DDI A/PHY A] PPS 0 turn panel power off
<7> [230.050309] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000
<7> [230.050859] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:389:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [230.051137] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:389:DDI A/PHY A] - short
<7> [230.051653] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:389:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [230.105661] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [230.105852] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [230.106598] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A
<7> [230.106650] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:389:DDI A/PHY A] - long
<7> [230.107348] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [230.107478] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:389:DDI A/PHY A]
<7> [230.107475] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A]
<7> [230.108198] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:389:DDI A/PHY A]
<7> [230.108307] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0
<7> [230.109025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A
<7> [230.109688] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 179200 kHz, VCO 537600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [230.110394] i915 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [i915]] aud_ts_cdclk set to M=60, N=448
<7> [230.110919] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI A/PHY A]
<7> [230.111226] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:398:DDI B/PHY B]
<7> [230.111443] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DDI TC1/PHY TC1]
<7> [230.111661] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:409:DP-MST A]
<7> [230.111876] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:410:DP-MST B]
<7> [230.112175] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:411:DP-MST C]
<7> [230.112408] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:416:DDI TC2/PHY TC2]
<7> [230.112613] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:418:DP-MST A]
<7> [230.112811] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:419:DP-MST B]
<7> [230.113028] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:420:DP-MST C]
<7> [230.113246] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:390:eDP-1]
<7> [230.113639] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 2 (mbus joined: no)
<7> [230.113845] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: yes -> no (pipe: *)
<7> [230.114061] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [230.114370] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_A
<7> [230.114658] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A]
<7> [230.115279] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B]
<7> [230.115511] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C]
<7> [230.133153] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [230.134050] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [230.134811] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [230.135846] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [230.137952] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [230.139067] i915 0000:00:02.0: [drm:intel_uc_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [230.140328] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [230.141336] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [230.142986] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [230.143685] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [230.144227] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [230.144805] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [230.217323] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A]
<7> [230.230172] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [230.230760] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [230.231604] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [230.232535] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [230.233400] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [230.234186] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [230.234837] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [230.235538] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [230.236142] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [230.236779] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [230.241671] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [230.242191] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [230.246590] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [230.247420] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [230.247861] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [230.248333] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [230.250297] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [230.251321] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-1]
<7> [230.251874] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B]
<7> [230.255918] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:408:DP-1]
<7> [230.256342] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [230.256675] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [230.256981] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [230.257882] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [230.258771] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:417:DP-2]
<7> [230.260336] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [230.261123] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [230.261611] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [230.262521] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C]
<7> [230.280340] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [230.281209] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [230.281846] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [231.309322] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [231.310472] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [231.312088] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [231.313055] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [231.313835] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [231.314579] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [231.314797] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [231.315356] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [231.315364] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [231.315862] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [231.316461] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [231.316941] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [231.317489] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [231.318061] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [231.318590] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [231.319450] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [231.320014] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [231.320088] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [231.320833] i915 0000:00:02.0: [drm:intel_uc_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [231.322124] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [231.323122] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [231.324770] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [231.325513] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [231.326054] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [231.326607] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [231.367450] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A]
<7> [231.367612] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CONNECTOR:390:eDP-1]
<7> [231.368133] i915 0000:00:02.0: [drm:compute_baseline_pipe_bpp [i915]] [CONNECTOR:390:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [231.369149] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:389:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 538600 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [231.369838] i915 0000:00:02.0: [drm:intel_dp_compute_output_format [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 HDR no link rate required 2019750 available 2160000
<7> [231.370523] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [231.371223] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:389:DDI A/PHY A] [CRTC:151:pipe A]
<7> [231.371743] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected no, found yes)
<7> [231.372387] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes)
<7> [231.372995] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)
<7> [231.373523] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 0, found 4)
<7> [231.374059] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [231.374567] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [231.375098] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3840)
<7> [231.375636] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 4000)
<7> [231.376179] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3840)
<7> [231.376692] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 4000)
<7> [231.377211] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3888)
<7> [231.377722] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3920)
<7> [231.378274] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 2160)
<7> [231.378807] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 2161)
<7> [231.379332] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 2163)
<7> [231.379836] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 2168)
<7> [231.380367] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 2244)
<7> [231.380870] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 2244)
<7> [231.381397] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3840)
<7> [231.381949] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 4000)
<7> [231.382474] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3840)
<7> [231.382993] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 4000)
<7> [231.383506] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3888)
<7> [231.384028] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3920)
<7> [231.384556] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 2160)
<7> [231.385097] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 2161)
<7> [231.385611] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 2163)
<7> [231.386132] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 2168)
<7> [231.386643] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 2244)
<7> [231.387195] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 2244)
<7> [231.387722] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [231.388250] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [231.388760] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [231.389280] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [231.389799] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)
<7> [231.390362] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in set_context_latency (expected 0, found 1)
<7> [231.390878] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset
<7> [231.391561] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7> [231.392037] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1
<7> [231.392571] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4027), size 0 -> 4027
<7> [231.393077] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (4027 - 4096), size 0 -> 69
<7> [231.393574] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [231.394058] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0
<7> [231.394520] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201
<7> [231.394959] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207
<7> [231.395492] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2154400 num active planes 1
<7> [231.396048] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10928 required 2263
<7> [231.396563] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15758 required 2263
<7> [231.397077] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 16388 required 2263
<7> [231.397578] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 17250 required 2263
<7> [231.398115] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 2263
<7> [231.398641] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 40533 required 2263
<7> [231.399166] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 2263
<7> [231.399683] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 0 kHz -> 269300 kHz
<7> [231.400264] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 33663 kHz
<7> [231.400784] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change
<7> [231.401334] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 307200 kHz, actual 307200 kHz
<7> [231.401863] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0
<7> [231.402399] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:151:pipe A] allocated DPLL 0
<7> [231.402914] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:151:pipe A] reserving DPLL 0
<7> [231.403373] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: yes [modeset]
<7> [231.403820] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [231.404371] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [231.404909] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>
<7> [231.405398] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [231.405740] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0
<7> [231.406116] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0
<7> [231.406638] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7843931, data_n: 8388608, link_m: 522928, link_n: 524288, tu: 64
<7> [231.407193] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [231.407676] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: disabled
<7> [231.408069] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled
<7> [231.408371] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [231.408848] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum hblank: 0
<7> [231.409361] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [231.409846] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 4, length 14
<7> [231.410336] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB
<7> [231.410718] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB
<7> [231.411121] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0
<7> [231.411611] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range
<7> [231.412109] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined
<7> [231.412587] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1
<7> [231.413080] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 1
<7> [231.413538] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 2244, vmax: 2244, flipline: 2244, pipeline full: 0, guardband: 82 vsync start: 81, vsync end: 76
<7> [231.413938] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 2162, vmax vblank: 2162, vmin vtotal: 2244, vmax vtotal: 2244
<7> [231.414428] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [231.415058] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [231.415537] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [231.415825] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=538600, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2161-2244 vs=2163-2168 vt=2244, flags=0xa
<7> [231.416075] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [231.416441] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=538600, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2161-2244 vs=2163-2168 vt=2244, flags=0xa
<7> [231.416946] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pixel rate 538600, min cdclk 269300, min voltage level 0
<7> [231.417426] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 60, ips linetime: 0
<7> [231.417833] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0
<7> [231.418061] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 3840x2160+0+0
<7> [231.418380] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [231.418868] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [231.419377] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0
<7> [231.419858] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0xe001a5, cfgcr1: 0x48, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0
<7> [231.420318] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [231.420682] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [231.421194] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [231.421685] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [231.422173] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [231.422649] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [231.422969] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [231.423185] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [231.423418] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [231.423833] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [231.424287] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [231.424721] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [231.425161] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:424] 3840x2160 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [231.425541] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [231.425811] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3840.000000x2160.000000+0.000000+0.000000 dst: 3840x2160+0+0
<7> [231.426237] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no
<7> [231.426648] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no
<7> [231.427049] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no
<7> [231.427423] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no
<7> [231.427671] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no
<7> [231.439981] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [231.440162] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [231.440365] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [231.440580] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [231.440839] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [231.441123] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [231.441401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [231.441708] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [231.441955] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [231.442282] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [231.444548] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [231.444797] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [231.448324] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [231.448926] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [231.449919] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [231.452515] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [231.452938] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [231.453591] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A
<7> [231.454040] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [231.454386] i915 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [i915]] aud_ts_cdclk set to M=60, N=768
<7> [231.454780] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI A/PHY A]
<7> [231.454996] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:398:DDI B/PHY B]
<7> [231.455223] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DDI TC1/PHY TC1]
<7> [231.455618] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:409:DP-MST A]
<7> [231.456040] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:410:DP-MST B]
<7> [231.456449] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:411:DP-MST C]
<7> [231.456779] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:416:DDI TC2/PHY TC2]
<7> [231.456996] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:418:DP-MST A]
<7> [231.457220] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:419:DP-MST B]
<7> [231.457617] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:420:DP-MST C]
<7> [231.458311] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf
<7> [231.458806] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: no -> yes (pipe: *)
<7> [231.459203] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 4 (mbus joined: yes)
<7> [231.459673] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A
<7> [231.460158] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A]
<7> [231.460618] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0
<7> [231.461172] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:389:DDI A/PHY A] PPS 0 turn panel power on
<7> [231.461576] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:389:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)
<7> [231.462017] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:389:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060
<7> [231.471979] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [231.472341] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:389:DDI A/PHY A] PPS 0 wait for panel power on
<7> [231.472645] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:389:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [231.534749] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [231.535579] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:389:DDI A/PHY A] - long
<7> [231.536270] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [231.537022] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:389:DDI A/PHY A]
<7> [231.682961] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [231.684025] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A
<7> [231.685429] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:389:DDI A/PHY A] PPS 0 turning VDD on
<7> [231.686382] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:389:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [231.688958] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 44 41 00 00 01 c0 02 00 02 00 00 0b 80
<7> [231.689003] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:390:eDP-1][ENCODER:389:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [231.689540] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:390:eDP-1][ENCODER:389:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 06
<7> [231.690440] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:390:eDP-1][ENCODER:389:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [231.690704] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:390:eDP-1][ENCODER:389:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [231.691580] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:390:eDP-1][ENCODER:389:DDI A/PHY A][DPRX] Clock recovery OK
<7> [231.691765] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:390:eDP-1][ENCODER:389:DDI A/PHY A][DPRX] Using DP training pattern TPS3
<7> [231.693015] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:390:eDP-1][ENCODER:389:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [231.693198] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:390:eDP-1][ENCODER:389:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4
<7> [231.693744] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A
<7> [231.694102] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]
<7> [231.694289] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A
<7> [231.694476] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:390:eDP-1] Performing OUI wait (0 ms)
<7> [231.694940] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:390:eDP-1] set backlight PWM = 6844
<7> [231.711023] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [231.714241] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:390:eDP-1]
<7> [231.715321] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A]
<7> [231.717946] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-1]
<6> [231.719771] [IGT] kms_pm_rpm: finished subtest basic-rte, SUCCESS
<7> [231.720222] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A]
<7> [231.722695] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:408:DP-1]
<7> [231.723590] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [231.724336] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:417:DP-2]
<7> [231.725081] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [231.726060] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected yes, found no)
<7> [231.726575] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no)
<7> [231.727173] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)
<7> [231.727709] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 4, found 0)
<7> [231.728245] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7843931/8388608 link 522928/524288, found tu 0, data 0/0 link 0/0)
<7> [231.728788] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [231.729350] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [231.729864] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3840, found 0)
<7> [231.730405] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 4000, found 0)
<7> [231.730918] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3840, found 0)
<7> [231.731405] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 4000, found 0)
<7> [231.731894] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3888, found 0)
<7> [231.732392] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3920, found 0)
<7> [231.732908] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 2160, found 0)
<7> [231.733429] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 2161, found 0)
<7> [231.733974] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 2163, found 0)
<7> [231.734504] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 2168, found 0)
<7> [231.735026] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 2244, found 0)
<7> [231.735534] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 2244, found 0)
<7> [231.736047] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3840, found 0)
<7> [231.736575] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 4000, found 0)
<7> [231.737118] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3840, found 0)
<7> [231.737639] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 4000, found 0)
<7> [231.738178] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3888, found 0)
<7> [231.738670] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3920, found 0)
<7> [231.739202] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 2160, found 0)
<7> [231.739738] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 2161, found 0)
<7> [231.740269] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 2163, found 0)
<7> [231.740782] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 2168, found 0)
<7> [231.741305] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 2244, found 0)
<7> [231.741782] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 2244, found 0)
<7> [231.742330] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [231.742886] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [231.743407] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [231.743919] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [231.744428] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 538600, found 0)
<7> [231.744955] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 538600, found 0)
<7> [231.745482] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)
<7> [231.746019] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in set_context_latency (expected 1, found 0)
<7> [231.746532] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset
<7> [231.746880] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:151:pipe A] releasing DPLL 0
<7> [231.747400] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no
<7> [231.747905] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0
<7> [231.748476] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 4027) -> ( 0 - 0), size 4027 -> 0
<7> [231.748971] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb (4027 - 4096) -> ( 0 - 0), size 69 -> 0
<7> [231.749440] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [231.749800] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [231.750286] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [231.750769] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [231.751333] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [231.751850] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10928 required 0
<7> [231.752385] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15758 required 0
<7> [231.752896] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 16388 required 0
<7> [231.753297] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 17250 required 0
<7> [231.753819] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 0
<7> [231.754369] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 40533 required 0
<7> [231.754900] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 0
<7> [231.755280] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 269300 kHz -> 0 kHz
<7> [231.755638] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 33663 kHz -> 0 kHz
<7> [231.756258] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change
<7> [231.756776] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 179200 kHz, actual 179200 kHz
<7> [231.757278] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0
<7> [231.757759] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: no [modeset]
<7> [231.758183] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no
<7> [231.758675] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no
<7> [231.759198] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no
<7> [231.759681] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no
<7> [231.760155] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no
<7> [231.760565] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no
<7> [231.761261] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [231.780346] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]
<7> [231.989176] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:390:eDP-1] set backlight PWM = 0
<7> [231.990288] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A
<7> [231.995129] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:389:DDI A/PHY A] PPS 0 turn panel power off
<7> [231.995447] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000
<7> [231.995721] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:389:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [231.996049] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:389:DDI A/PHY A] - short
<7> [231.996353] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:389:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [232.051057] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [232.051979] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:389:DDI A/PHY A] - long
<7> [232.052743] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [232.055960] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [232.056561] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A
<7> [232.057208] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:389:DDI A/PHY A]
<7> [232.057208] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A]
<7> [232.057739] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:389:DDI A/PHY A]
<7> [232.057817] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0
<7> [232.058372] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A
<7> [232.058715] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 179200 kHz, VCO 537600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [232.059040] i915 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [i915]] aud_ts_cdclk set to M=60, N=448
<7> [232.059262] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI A/PHY A]
<7> [232.059498] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:398:DDI B/PHY B]
<7> [232.059723] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DDI TC1/PHY TC1]
<7> [232.059967] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:409:DP-MST A]
<7> [232.060191] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:410:DP-MST B]
<7> [232.060405] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:411:DP-MST C]
<7> [232.060630] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:416:DDI TC2/PHY TC2]
<7> [232.061139] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:418:DP-MST A]
<7> [232.061620] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:419:DP-MST B]
<7> [232.062097] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:420:DP-MST C]
<7> [232.062567] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:390:eDP-1]
<7> [232.063450] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 2 (mbus joined: no)
<7> [232.063956] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: yes -> no (pipe: *)
<7> [232.064441] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [232.065093] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_A
<7> [232.065716] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A]
<7> [232.066913] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B]
<7> [232.067386] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C]
<7> [232.085049] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [232.085818] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [232.086521] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [232.781229] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [232.782377] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [232.783619] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [232.784947] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [232.785894] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [232.786554] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [232.786763] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [232.787302] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [232.787312] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [232.787808] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [232.788409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [232.788649] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [232.788886] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [232.789117] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [232.789327] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [232.789860] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [232.790101] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [232.790092] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [232.790978] i915 0000:00:02.0: [drm:intel_uc_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [232.792258] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [232.793322] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [232.793993] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [232.794642] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [232.795159] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [232.795719] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [232.879162] i915 0000:00:02.0: [drm:compute_baseline_pipe_bpp [i915]] [CONNECTOR:390:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [232.879906] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:389:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 538600 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [232.880432] i915 0000:00:02.0: [drm:intel_dp_compute_output_format [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 HDR no link rate required 2019750 available 2160000
<7> [232.880666] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [232.880885] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:389:DDI A/PHY A] [CRTC:151:pipe A]
<7> [232.881097] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected no, found yes)
<7> [232.881335] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes)
<7> [232.881571] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)
<7> [232.881797] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 0, found 4)
<7> [232.882046] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [232.882280] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [232.882497] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3840)
<7> [232.882711] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 4000)
<7> [232.883111] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3840)
<7> [232.883352] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 4000)
<7> [232.883576] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3888)
<7> [232.883800] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3920)
<7> [232.884053] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 2160)
<7> [232.884288] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 2161)
<7> [232.884505] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 2163)
<7> [232.884720] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 2168)
<7> [232.884959] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 2244)
<7> [232.885199] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 2244)
<7> [232.885432] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3840)
<7> [232.885661] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 4000)
<7> [232.885900] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3840)
<7> [232.886131] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 4000)
<7> [232.886350] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3888)
<7> [232.886586] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3920)
<7> [232.886853] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 2160)
<7> [232.887090] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 2161)
<7> [232.887311] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 2163)
<7> [232.887540] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 2168)
<7> [232.887761] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 2244)
<7> [232.888033] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 2244)
<7> [232.888263] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [232.888498] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [232.888747] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [232.889176] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [232.889412] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)
<7> [232.889624] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in set_context_latency (expected 0, found 1)
<7> [232.889893] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset
<7> [232.890228] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7> [232.890449] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1
<7> [232.890661] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4027), size 0 -> 4027
<7> [232.890888] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (4027 - 4096), size 0 -> 69
<7> [232.891093] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [232.891289] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0
<7> [232.891495] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201
<7> [232.891715] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207
<7> [232.892007] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2154400 num active planes 1
<7> [232.892248] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10928 required 2263
<7> [232.892479] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15758 required 2263
<7> [232.892703] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 16388 required 2263
<7> [232.892942] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 17250 required 2263
<7> [232.893170] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 2263
<7> [232.893406] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 40533 required 2263
<7> [232.893650] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 2263
<7> [232.893918] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 0 kHz -> 269300 kHz
<7> [232.894198] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 33663 kHz
<7> [232.894426] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change
<7> [232.894639] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 307200 kHz, actual 307200 kHz
<7> [232.894889] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0
<7> [232.895131] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:151:pipe A] allocated DPLL 0
<7> [232.895355] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:151:pipe A] reserving DPLL 0
<7> [232.895593] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: yes [modeset]
<7> [232.895839] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [232.896079] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [232.896303] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>
<7> [232.896549] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [232.896801] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0
<7> [232.897054] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0
<7> [232.897297] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7843931, data_n: 8388608, link_m: 522928, link_n: 524288, tu: 64
<7> [232.897530] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [232.897744] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: disabled
<7> [232.897981] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled
<7> [232.898216] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [232.898452] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum hblank: 0
<7> [232.898692] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [232.898939] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 4, length 14
<7> [232.899181] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB
<7> [232.899394] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB
<7> [232.899602] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0
<7> [232.899836] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range
<7> [232.900074] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined
<7> [232.900303] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1
<7> [232.900534] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 1
<7> [232.900762] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 2244, vmax: 2244, flipline: 2244, pipeline full: 0, guardband: 82 vsync start: 81, vsync end: 76
<7> [232.900998] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 2162, vmax vblank: 2162, vmin vtotal: 2244, vmax vtotal: 2244
<7> [232.901233] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [232.901475] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [232.901722] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [232.901978] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=538600, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2161-2244 vs=2163-2168 vt=2244, flags=0xa
<7> [232.902220] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [232.902434] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=538600, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2161-2244 vs=2163-2168 vt=2244, flags=0xa
<7> [232.902646] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pixel rate 538600, min cdclk 269300, min voltage level 0
<7> [232.902882] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 60, ips linetime: 0
<7> [232.903115] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0
<7> [232.903347] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 3840x2160+0+0
<7> [232.903577] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [232.903811] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [232.904054] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0
<7> [232.904289] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0xe001a5, cfgcr1: 0x48, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0
<7> [232.904510] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [232.904747] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [232.904999] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [232.905233] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [232.905458] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [232.905672] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [232.905890] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [232.906112] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [232.906340] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [232.906579] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [232.906832] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [232.907074] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [232.907286] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:391] 3840x2160 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [232.907500] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [232.907726] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3840.000000x2160.000000+0.000000+0.000000 dst: 3840x2160+0+0
<7> [232.907975] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no
<7> [232.908211] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no
<7> [232.908430] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no
<7> [232.908656] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no
<7> [232.908888] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no
<7> [232.921221] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [232.921413] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [232.921613] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [232.921853] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [232.922188] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [232.922569] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [232.922945] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [232.923851] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [232.924143] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [232.924509] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [232.927203] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [232.927454] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [232.931622] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [232.933115] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [232.933803] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [232.934185] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [232.934601] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [232.935247] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A
<7> [232.935587] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [232.935949] i915 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [i915]] aud_ts_cdclk set to M=60, N=768
<7> [232.936385] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI A/PHY A]
<7> [232.936775] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:398:DDI B/PHY B]
<7> [232.937076] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DDI TC1/PHY TC1]
<7> [232.937288] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:409:DP-MST A]
<7> [232.937612] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:410:DP-MST B]
<7> [232.938040] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:411:DP-MST C]
<7> [232.938437] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:416:DDI TC2/PHY TC2]
<7> [232.938800] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:418:DP-MST A]
<7> [232.939193] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:419:DP-MST B]
<7> [232.939554] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:420:DP-MST C]
<7> [232.940000] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf
<7> [232.940457] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: no -> yes (pipe: *)
<7> [232.940806] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 4 (mbus joined: yes)
<7> [232.941227] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A
<7> [232.941598] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A]
<7> [232.941830] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0
<7> [232.942202] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:389:DDI A/PHY A] PPS 0 turn panel power on
<7> [232.942523] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:389:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)
<7> [232.942947] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:389:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060
<7> [232.953386] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [232.953794] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:389:DDI A/PHY A] PPS 0 wait for panel power on
<7> [232.954156] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:389:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [233.016205] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [233.017127] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:389:DDI A/PHY A] - long
<7> [233.017891] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [233.018717] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:389:DDI A/PHY A]
<7> [233.170914] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [233.172057] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A
<7> [233.173513] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:389:DDI A/PHY A] PPS 0 turning VDD on
<7> [233.174465] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:389:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [233.177058] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 44 41 00 00 01 c0 02 00 02 00 00 0b 80
<7> [233.177098] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:390:eDP-1][ENCODER:389:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [233.177655] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:390:eDP-1][ENCODER:389:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 06
<7> [233.178607] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:390:eDP-1][ENCODER:389:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [233.178888] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:390:eDP-1][ENCODER:389:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [233.179781] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:390:eDP-1][ENCODER:389:DDI A/PHY A][DPRX] Clock recovery OK
<7> [233.179972] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:390:eDP-1][ENCODER:389:DDI A/PHY A][DPRX] Using DP training pattern TPS3
<7> [233.181309] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:390:eDP-1][ENCODER:389:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [233.181729] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:390:eDP-1][ENCODER:389:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4
<7> [233.182877] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A
<7> [233.183765] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]
<7> [233.184245] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A
<7> [233.184697] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:390:eDP-1] Performing OUI wait (0 ms)
<7> [233.185614] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:390:eDP-1] set backlight PWM = 6844
<7> [233.200651] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [233.204025] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:390:eDP-1]
<7> [233.205077] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A]
<7> [233.208085] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [233.208146] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-1]
<6> [233.210218] [IGT] kms_pm_rpm: exiting, ret=0
<7> [233.212839] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:408:DP-1]
<7> [233.213701] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [233.214421] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:417:DP-2]
<7> [233.215113] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<6> [233.217474] Console: switching to colour frame buffer device 240x67
|