Results for igt@kms_frontbuffer_tracking@fbc-1p-primscrn-pri-shrfb-draw-pwrite

Result: Pass

git-log-oneline i915_display_info2 igt_runner2 runtimes2 results2.json results2-i915-load.json guc_logs2.tar i915_display_info_post_exec2 boot2 dmesg2

DetailValue
Duration 6.24 seconds
Hostname
shard-mtlp-3
Igt-Version
IGT-Version: 2.3-gce7a760a2 (x86_64) (Linux: 7.0.0-rc5-CI_DRM_18213-gcfe3d5f3eb5c+ x86_64)
Out
Using IGT_SRANDOM=1774476616 for randomisation
Opened device: /dev/dri/card0
FBC last action not supported
Can't test DRRS: no usable screen.
Starting subtest: fbc-1p-primscrn-pri-shrfb-draw-pwrite
Subtest fbc-1p-primscrn-pri-shrfb-draw-pwrite: SUCCESS (6.237s)
Err
Starting subtest: fbc-1p-primscrn-pri-shrfb-draw-pwrite
Subtest fbc-1p-primscrn-pri-shrfb-draw-pwrite: SUCCESS (6.237s)
Dmesg
<6> [426.964787] Console: switching to colour dummy device 80x25
<6> [426.965179] [IGT] kms_frontbuffer_tracking: executing
<7> [426.969486] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [426.970703] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [426.988248] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [426.993940] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:DP-1]
<7> [426.993969] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:517:DP-1]
<7> [426.998172] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:DP-1] disconnected
<7> [426.998416] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [426.998419] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [427.002636] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [427.002903] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2]
<7> [427.002907] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:535:DP-2]
<7> [427.003177] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2] disconnected
<7> [427.003425] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-2]
<7> [427.003428] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:544:HDMI-A-2]
<7> [427.007750] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-2] disconnected
<7> [427.008014] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:548:DP-3]
<7> [427.008017] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:548:DP-3]
<7> [427.008259] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:548:DP-3] disconnected
<7> [427.008496] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:557:DP-4]
<7> [427.008499] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:557:DP-4]
<7> [427.008738] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:557:DP-4] disconnected
<7> [427.009082] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [427.009085] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:508:eDP-1]
<7> [427.009647] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [427.010044] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [427.010184] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [427.010311] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [427.010455] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [427.010459] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [427.010462] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [427.010478] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] VRR capable: no
<7> [427.010604] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [427.010725] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [427.011175] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [427.011178] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [427.011191] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:DP-1]
<7> [427.011193] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:517:DP-1]
<7> [427.015387] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:DP-1] disconnected
<7> [427.015399] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [427.015402] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [427.019587] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [427.019597] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2]
<7> [427.019600] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:535:DP-2]
<7> [427.019832] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2] disconnected
<7> [427.019839] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-2]
<7> [427.019842] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:544:HDMI-A-2]
<7> [427.024498] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-2] disconnected
<7> [427.024513] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:548:DP-3]
<7> [427.024516] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:548:DP-3]
<7> [427.024746] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:548:DP-3] disconnected
<7> [427.024755] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:557:DP-4]
<7> [427.024757] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:557:DP-4]
<7> [427.025211] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:557:DP-4] disconnected
<7> [427.026837] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [427.026991] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:568]
<7> [427.027049] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:569]
<7> [427.027101] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [427.027239] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:570]
<7> [427.027292] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [427.027419] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:571]
<7> [427.027469] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [427.027606] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:572]
<6> [427.028890] [IGT] kms_frontbuffer_tracking: starting subtest fbc-1p-primscrn-pri-shrfb-draw-pwrite
<7> [427.029340] i915 0000:00:02.0: [drm:i915_edp_psr_debug_set [i915]] Setting PSR debug to f
<7> [427.029484] i915 0000:00:02.0: [drm:intel_psr_debug_set [i915]] Invalid debug mask f
<7> [427.029642] i915 0000:00:02.0: [drm:i915_edp_psr_debug_set [i915]] Setting PSR debug to 1
<7> [427.029846] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:508:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [427.030008] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:507:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [427.030133] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 HDR no link rate required 1926825 available 2160000
<7> [427.030253] i915 0000:00:02.0: [drm:intel_psr_compute_config [i915]] PSR disabled by flag
<7> [427.030403] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [427.030532] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:507:DDI A/PHY A] [CRTC:151:pipe A]
<7> [427.030650] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1801, found 1800)
<7> [427.030777] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1801, found 1800)
<7> [427.030906] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in set_context_latency (expected 1, found 0)
<7> [427.031047] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset
<7> [427.031177] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:151:pipe A] releasing DPLL 0
<7> [427.031352] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:151:pipe A] allocated DPLL 0
<7> [427.031478] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:151:pipe A] reserving DPLL 0
<7> [427.031606] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: yes [modeset]
<7> [427.031739] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [427.031866] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [427.032050] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>
<7> [427.032189] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [427.032318] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0
<7> [427.032461] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0
<7> [427.032582] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64
<7> [427.032704] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [427.032828] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled
<7> [427.033003] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled
<7> [427.033130] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7> [427.033260] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0
<7> [427.033382] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7> [427.033501] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1
<7> [427.033627] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [427.033751] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1878, vmax: 1878, flipline: 1878, pipeline full: 0, guardband: 76 vsync start: 75, vsync end: 69
<7> [427.033873] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1878, vmax vtotal: 1878
<7> [427.034009] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [427.034133] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [427.034258] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [427.034394] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa
<7> [427.034517] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa
<7> [427.034637] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa
<7> [427.034756] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820, min cdclk 256910
<7> [427.034874] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0
<7> [427.035008] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [427.035133] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [427.035257] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0
<7> [427.035376] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [427.035499] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: fracen: yes,
<7> [427.035621] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] quot: 40960, rem: 0, den: 1,
<7> [427.035748] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 140, tx_clk_div: 0.
<7> [427.035869] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state:
<7> [427.035999] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21
<7> [427.036128] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7> [427.036251] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [427.036370] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [427.036490] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7> [427.036608] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7> [427.036732] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [427.036854] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [427.036986] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [427.037109] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [427.037249] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [427.037365] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [427.037485] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [427.037604] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [427.037723] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [427.037841] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [427.037967] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [427.038085] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [427.038204] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [427.038324] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:509] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [427.038443] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [427.038565] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [427.038685] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no
<7> [427.038805] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no
<7> [427.038924] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no
<7> [427.039061] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no
<7> [427.039180] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no
<7> [427.039354] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [427.040630] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]
<7> [427.242243] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:508:eDP-1] set backlight PWM = 0
<7> [427.243255] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A
<7> [427.252231] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 turn panel power off
<7> [427.252525] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000
<7> [427.252778] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [427.253086] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - short
<7> [427.253392] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [427.304819] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [427.305246] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [427.305450] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A]
<7> [427.305606] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:507:DDI A/PHY A]
<7> [427.305816] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - long
<7> [427.306334] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [427.306881] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:507:DDI A/PHY A]
<7> [427.307670] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0
<7> [427.308391] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A
<7> [427.309020] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:507:DDI A/PHY A]
<7> [427.309428] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:516:DDI B/PHY B]
<7> [427.309823] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:518:DP-MST A]
<7> [427.310223] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:519:DP-MST B]
<7> [427.310458] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:520:DP-MST C]
<7> [427.310689] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:521:DP-MST D]
<7> [427.310936] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:534:DDI TC1/PHY TC1]
<7> [427.311315] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:536:DP-MST A]
<7> [427.311733] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:537:DP-MST B]
<7> [427.311890] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:538:DP-MST C]
<7> [427.312054] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:539:DP-MST D]
<7> [427.312220] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:543:DDI TC2/PHY TC2]
<7> [427.312355] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:547:DDI TC3/PHY TC3]
<7> [427.312480] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:549:DP-MST A]
<7> [427.312605] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:550:DP-MST B]
<7> [427.312731] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:551:DP-MST C]
<7> [427.312867] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:552:DP-MST D]
<7> [427.312998] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:556:DDI TC4/PHY TC4]
<7> [427.313185] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:558:DP-MST A]
<7> [427.313322] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:559:DP-MST B]
<7> [427.313476] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:560:DP-MST C]
<7> [427.313627] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:561:DP-MST D]
<7> [427.313861] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A
<7> [427.314898] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A]
<7> [427.315057] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0
<7> [427.317079] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 turn panel power on
<7> [427.317268] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power cycle (489 ms remaining)
<7> [427.810289] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [427.872452] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [427.873158] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power on
<7> [427.873872] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [427.905809] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [427.906433] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - long
<7> [427.906947] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [427.907584] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:507:DDI A/PHY A]
<7> [428.076480] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [428.077636] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 turning VDD on
<7> [428.078258] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [428.081718] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80
<7> [428.081718] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4
<7> [428.081659] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [428.081676] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [428.082621] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [428.083230] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [428.084129] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07
<7> [428.085153] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [428.086137] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [428.087071] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Clock recovery OK
<7> [428.087188] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using DP training pattern TPS3
<7> [428.088500] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [428.088624] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4
<7> [428.089221] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A
<7> [428.089458] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]
<7> [428.089595] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A
<7> [428.089803] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:508:eDP-1] set backlight PWM = 13892
<7> [428.101065] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:508:eDP-1]
<7> [428.101417] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A]
<7> [428.104567] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [428.104719] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:568]
<7> [428.104770] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:569]
<7> [428.104821] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [428.104955] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:570]
<7> [428.105026] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [428.105184] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:571]
<7> [428.105248] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [428.105373] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:572]
<7> [428.167723] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A]
<7> [428.167880] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected yes, found no)
<7> [428.168255] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no)
<7> [428.168648] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)
<7> [428.168895] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 4, found 0)
<7> [428.169141] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 498869/524288, found tu 0, data 0/0 link 0/0)
<7> [428.169381] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [428.169650] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [428.169886] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)
<7> [428.170121] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)
<7> [428.170331] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)
<7> [428.170458] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)
<7> [428.170598] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)
<7> [428.170723] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)
<7> [428.170848] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)
<7> [428.170972] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)
<7> [428.171096] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)
<7> [428.171220] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)
<7> [428.171345] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1878, found 0)
<7> [428.171468] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1878, found 0)
<7> [428.171608] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)
<7> [428.171740] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)
<7> [428.171861] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)
<7> [428.171981] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)
<7> [428.172099] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)
<7> [428.172220] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)
<7> [428.172340] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)
<7> [428.172460] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)
<7> [428.172599] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)
<7> [428.172722] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)
<7> [428.172850] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1878, found 0)
<7> [428.172971] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1878, found 0)
<7> [428.173090] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [428.173211] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [428.173332] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [428.173451] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)
<7> [428.173596] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [428.173718] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 513820, found 0)
<7> [428.173836] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 513820, found 0)
<7> [428.173956] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)
<7> [428.174077] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset
<7> [428.174197] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:151:pipe A] releasing DPLL 0
<7> [428.174353] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no
<7> [428.174474] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0
<7> [428.174629] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [428.174760] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb (4001 - 4096) -> ( 0 - 0), size 95 -> 0
<7> [428.174881] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [428.175001] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [428.175119] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [428.175239] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [428.175375] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [428.175507] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [428.175635] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [428.175759] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [428.175880] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [428.176003] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [428.176126] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 256910 kHz -> 0 kHz
<7> [428.176267] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 32114 kHz -> 0 kHz
<7> [428.176393] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Can change cdclk via squashing
<7> [428.176520] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 172800 kHz, actual 172800 kHz
<7> [428.176644] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0
<7> [428.176782] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: no [modeset]
<7> [428.176905] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no
<7> [428.177030] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no
<7> [428.177153] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no
<7> [428.177275] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no
<7> [428.177396] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no
<7> [428.177519] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no
<7> [428.177898] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]
<7> [428.385865] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:508:eDP-1] set backlight PWM = 0
<7> [428.386834] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A
<7> [428.391093] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 turn panel power off
<7> [428.391446] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000
<7> [428.391683] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [428.392007] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - short
<7> [428.392220] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [428.444466] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [428.445087] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - long
<7> [428.445602] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [428.446586] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [428.447106] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A]
<7> [428.447272] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:507:DDI A/PHY A]
<7> [428.447832] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:507:DDI A/PHY A]
<7> [428.448914] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0
<7> [428.449483] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A
<7> [428.450002] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:507:DDI A/PHY A]
<7> [428.450297] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:516:DDI B/PHY B]
<7> [428.450583] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:518:DP-MST A]
<7> [428.450852] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:519:DP-MST B]
<7> [428.451116] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:520:DP-MST C]
<7> [428.451369] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:521:DP-MST D]
<7> [428.451509] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:534:DDI TC1/PHY TC1]
<7> [428.451639] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:536:DP-MST A]
<7> [428.451767] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:537:DP-MST B]
<7> [428.451895] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:538:DP-MST C]
<7> [428.452023] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:539:DP-MST D]
<7> [428.452153] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:543:DDI TC2/PHY TC2]
<7> [428.452282] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:547:DDI TC3/PHY TC3]
<7> [428.452416] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:549:DP-MST A]
<7> [428.452541] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:550:DP-MST B]
<7> [428.452666] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:551:DP-MST C]
<7> [428.452796] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:552:DP-MST D]
<7> [428.452925] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:556:DDI TC4/PHY TC4]
<7> [428.453054] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:558:DP-MST A]
<7> [428.453180] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:559:DP-MST B]
<7> [428.453301] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:560:DP-MST C]
<7> [428.453426] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:561:DP-MST D]
<7> [428.453542] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:508:eDP-1]
<7> [428.453719] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 2 (mbus joined: no)
<7> [428.453859] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: yes -> no (pipe: *)
<7> [428.453984] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [428.454210] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_A
<7> [428.454346] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xaa000000)
<7> [428.454551] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A]
<7> [428.454725] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Post changing CDCLK to 172800 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [428.454888] i915 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [i915]] aud_ts_cdclk set to M=60, N=432
<7> [428.457367] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B]
<7> [428.459605] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C]
<7> [428.461811] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:505:pipe D]
<7> [428.464734] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [428.464881] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:566]
<7> [428.482454] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [428.482829] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [428.483125] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [428.483469] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [428.484068] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A]
<7> [428.484097] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CONNECTOR:508:eDP-1]
<7> [428.484167] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:508:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [428.484318] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:507:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [428.484464] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 HDR no link rate required 1926825 available 2160000
<7> [428.484588] i915 0000:00:02.0: [drm:intel_psr_compute_config [i915]] PSR disabled by flag
<7> [428.484720] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [428.484851] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:507:DDI A/PHY A] [CRTC:151:pipe A]
<7> [428.484970] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected no, found yes)
<7> [428.485097] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes)
<7> [428.485223] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)
<7> [428.485351] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 0, found 4)
<7> [428.485491] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 7483046/8388608 link 498869/524288)
<7> [428.485618] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [428.485741] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [428.485863] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)
<7> [428.485984] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)
<7> [428.486105] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)
<7> [428.486228] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)
<7> [428.486355] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)
<7> [428.486492] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)
<7> [428.486613] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)
<7> [428.486736] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)
<7> [428.486857] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)
<7> [428.486979] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)
<7> [428.487100] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1878)
<7> [428.487223] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1878)
<7> [428.487347] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)
<7> [428.487496] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)
<7> [428.487616] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)
<7> [428.487736] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)
<7> [428.487857] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)
<7> [428.487979] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)
<7> [428.488100] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)
<7> [428.488221] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)
<7> [428.488340] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)
<7> [428.488487] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)
<7> [428.488610] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1878)
<7> [428.488731] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1878)
<7> [428.488853] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [428.488974] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [428.489093] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [428.489214] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)
<7> [428.489337] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [428.489485] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 513820)
<7> [428.489608] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 513820)
<7> [428.489729] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)
<7> [428.489850] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset
<7> [428.490023] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7> [428.490146] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1
<7> [428.490290] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [428.490430] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95
<7> [428.490555] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [428.490672] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [428.490791] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [428.490910] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [428.491048] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [428.491170] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [428.491294] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [428.491440] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [428.491565] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [428.491686] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [428.491807] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 0 kHz -> 256910 kHz
<7> [428.491946] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 32114 kHz
<7> [428.492071] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Can change cdclk via squashing
<7> [428.492192] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 307200 kHz, actual 307200 kHz
<7> [428.492311] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0
<7> [428.492480] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:151:pipe A] allocated DPLL 0
<7> [428.492609] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:151:pipe A] reserving DPLL 0
<7> [428.492739] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: yes [modeset]
<7> [428.492863] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [428.492989] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [428.493113] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>
<7> [428.493236] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [428.493369] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0
<7> [428.493558] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0
<7> [428.493681] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64
<7> [428.493804] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [428.493927] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled
<7> [428.494051] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled
<7> [428.494174] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7> [428.494297] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0
<7> [428.494437] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7> [428.494566] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1
<7> [428.494687] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [428.494807] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1878, vmax: 1878, flipline: 1878, pipeline full: 0, guardband: 76 vsync start: 75, vsync end: 69
<7> [428.494929] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1878, vmax vtotal: 1878
<7> [428.495051] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [428.495175] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [428.495296] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [428.495434] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa
<7> [428.495556] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa
<7> [428.495683] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa
<7> [428.495810] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820, min cdclk 256910
<7> [428.495936] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0
<7> [428.496059] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [428.496184] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [428.496307] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0
<7> [428.496438] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [428.496558] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: fracen: yes,
<7> [428.496682] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] quot: 40960, rem: 0, den: 1,
<7> [428.496804] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 140, tx_clk_div: 0.
<7> [428.496928] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state:
<7> [428.497048] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21
<7> [428.497169] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7> [428.497288] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [428.497421] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [428.497545] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7> [428.497668] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7> [428.497789] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [428.497909] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [428.498029] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [428.498150] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [428.498273] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [428.498397] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [428.498515] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [428.498633] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [428.498754] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [428.498878] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [428.499000] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [428.499120] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [428.499238] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [428.499361] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:566] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x100000000000001, visible: yes
<7> [428.499497] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [428.499616] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [428.499734] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no
<7> [428.499854] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no
<7> [428.499974] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no
<7> [428.500093] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no
<7> [428.500212] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no
<7> [428.502516] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [428.504806] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [428.505106] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [428.505305] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A
<7> [428.505491] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa8000000)
<7> [428.505643] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [428.505805] i915 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [i915]] aud_ts_cdclk set to M=60, N=768
<7> [428.505932] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:507:DDI A/PHY A]
<7> [428.506057] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:516:DDI B/PHY B]
<7> [428.506180] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:518:DP-MST A]
<7> [428.506302] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:519:DP-MST B]
<7> [428.506432] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:520:DP-MST C]
<7> [428.506552] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:521:DP-MST D]
<7> [428.506668] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:534:DDI TC1/PHY TC1]
<7> [428.506787] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:536:DP-MST A]
<7> [428.506905] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:537:DP-MST B]
<7> [428.507024] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:538:DP-MST C]
<7> [428.507140] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:539:DP-MST D]
<7> [428.507256] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:543:DDI TC2/PHY TC2]
<7> [428.507376] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:547:DDI TC3/PHY TC3]
<7> [428.507495] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:549:DP-MST A]
<7> [428.507613] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:550:DP-MST B]
<7> [428.507726] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:551:DP-MST C]
<7> [428.507846] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:552:DP-MST D]
<7> [428.507967] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:556:DDI TC4/PHY TC4]
<7> [428.508088] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:558:DP-MST A]
<7> [428.508223] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:559:DP-MST B]
<7> [428.508402] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:560:DP-MST C]
<7> [428.508532] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:561:DP-MST D]
<7> [428.508683] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf
<7> [428.508899] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: no -> yes (pipe: *)
<7> [428.509026] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 4 (mbus joined: yes)
<7> [428.509238] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A
<7> [428.510436] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A]
<7> [428.510594] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0
<7> [428.512541] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 turn panel power on
<7> [428.512712] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power cycle (435 ms remaining)
<7> [428.953767] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [429.000368] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [429.001016] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power on
<7> [429.001745] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [429.033563] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [429.034147] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - long
<7> [429.034672] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [429.035243] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:507:DDI A/PHY A]
<7> [429.208687] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [429.209769] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 turning VDD on
<7> [429.210546] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [429.213977] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80
<7> [429.215431] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [429.216164] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07
<7> [429.217163] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [429.218167] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [429.219087] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Clock recovery OK
<7> [429.219226] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using DP training pattern TPS3
<7> [429.220476] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [429.220587] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4
<7> [429.221180] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A
<7> [429.221480] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]
<7> [429.221599] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A
<7> [429.221768] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:508:eDP-1] set backlight PWM = 13892
<7> [429.233070] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:508:eDP-1]
<7> [429.233361] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A]
<7> [429.236357] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [429.289190] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:566] from all active usage due to RMFB ioctl
<7> [429.289279] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:566] is removed
<7> [429.289357] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [429.289794] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [429.290077] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [429.290366] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [429.290611] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [429.290845] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [429.291037] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [429.291238] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [429.291419] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [429.291603] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [429.291785] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [429.300448] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [429.300667] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:566]
<7> [429.300728] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [429.300862] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:575]
<7> [429.300915] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [429.301039] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:576]
<7> [429.301111] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [429.301316] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:577]
<7> [430.288554] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A]
<7> [430.288600] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CONNECTOR:508:eDP-1]
<7> [430.288682] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [430.288999] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [430.289290] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [430.289574] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [430.289822] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [430.289992] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [430.290161] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [430.290327] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [430.290487] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [430.290647] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [430.290816] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [430.301675] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B]
<7> [430.303827] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C]
<7> [430.305956] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:505:pipe D]
<7> [430.322677] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [430.322879] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [430.377659] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A]
<7> [430.377801] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CONNECTOR:508:eDP-1]
<7> [430.388702] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [430.444217] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A]
<7> [430.444316] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CONNECTOR:508:eDP-1]
<7> [430.455504] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [430.511135] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A]
<7> [430.511228] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CONNECTOR:508:eDP-1]
<7> [430.521995] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [430.578375] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:577] from all active usage due to RMFB ioctl
<7> [430.578478] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:577] is removed
<7> [430.578561] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [430.579027] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [430.579380] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [430.579745] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [430.580009] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [430.580258] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [430.580501] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [430.580749] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [430.581020] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [430.581288] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [430.581476] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [432.177450] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A]
<7> [432.177485] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CONNECTOR:508:eDP-1]
<7> [432.177548] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [432.177733] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [432.177887] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [432.178051] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [432.178205] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [432.178366] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [432.178527] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [432.178679] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [432.178828] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [432.178977] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [432.179135] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [432.183912] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 58982400 bytes of contiguous stolen space for FBC, limit: 1
<7> [432.184167] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:35:plane 1A]
<7> [432.190863] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B]
<7> [432.193230] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C]
<7> [432.195571] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:505:pipe D]
<7> [432.211563] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [432.211755] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]
<7> [432.224225] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [432.279177] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [432.418830] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]
<7> [432.419051] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [432.468591] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [432.819610] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]
<7> [432.820850] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [432.878875] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [433.019980] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]
<7> [433.020191] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [433.078675] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [433.161194] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]
<7> [433.161431] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [433.211696] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<6> [433.267271] [IGT] kms_frontbuffer_tracking: finished subtest fbc-1p-primscrn-pri-shrfb-draw-pwrite, SUCCESS
<7> [433.268377] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:572] from all active usage due to RMFB ioctl
<7> [433.268443] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:572] is removed
<7> [433.268498] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [433.268855] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [433.269286] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [433.269728] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [433.269889] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [433.270212] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [433.270455] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [433.270797] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [433.271092] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [433.271343] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [433.271504] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [433.277272] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:35:plane 1A]
<6> [433.289001] [IGT] kms_frontbuffer_tracking: exiting, ret=0
<7> [433.289111] i915 0000:00:02.0: [drm:i915_edp_psr_debug_set [i915]] Setting PSR debug to 0
<7> [433.289315] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:508:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [433.289465] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:507:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [433.289592] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 HDR no link rate required 1926825 available 2160000
<7> [433.289738] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [433.289870] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:507:DDI A/PHY A] [CRTC:151:pipe A]
<7> [433.289991] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 1801)
<7> [433.290124] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 1801)
<7> [433.290253] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in set_context_latency (expected 0, found 1)
<7> [433.290380] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset
<7> [433.290505] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:151:pipe A] releasing DPLL 0
<7> [433.290694] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:508:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [433.290829] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:507:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [433.290944] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 HDR no link rate required 1926825 available 2160000
<7> [433.291058] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [433.291181] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:507:DDI A/PHY A] [CRTC:151:pipe A]
<7> [433.291298] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 1801)
<7> [433.291423] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 1801)
<7> [433.291549] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in set_context_latency (expected 0, found 1)
<7> [433.291687] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset
<7> [433.291813] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:151:pipe A] releasing DPLL 0
<7> [433.291979] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:508:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [433.292108] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:507:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [433.292224] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 HDR no link rate required 1926825 available 2160000
<7> [433.292337] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [433.292460] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:507:DDI A/PHY A] [CRTC:151:pipe A]
<7> [433.292574] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 1801)
<7> [433.292715] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 1801)
<7> [433.292842] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in set_context_latency (expected 0, found 1)
<7> [433.292965] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset
<7> [433.293088] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:151:pipe A] releasing DPLL 0
<7> [433.293242] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:151:pipe A] allocated DPLL 0
<7> [433.293364] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:151:pipe A] reserving DPLL 0
<7> [433.293489] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: yes [modeset]
<7> [433.293615] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [433.293760] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [433.293884] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>
<7> [433.294007] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [433.294130] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0
<7> [433.294252] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0
<7> [433.294376] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64
<7> [433.294500] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [433.294627] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled
<7> [433.294751] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled
<7> [433.294870] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [433.294990] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0
<7> [433.295111] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [433.295232] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 4, length 14
<7> [433.295353] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB
<7> [433.295472] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB
<7> [433.295592] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0
<7> [433.295729] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range
<7> [433.295849] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined
<7> [433.295967] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1
<7> [433.296085] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 1
<7> [433.296206] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1878, vmax: 1878, flipline: 1878, pipeline full: 0, guardband: 76 vsync start: 75, vsync end: 69
<7> [433.296326] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1878, vmax vtotal: 1878
<7> [433.296445] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [433.296567] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [433.296696] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [433.296818] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa
<7> [433.296943] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa
<7> [433.297070] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa
<7> [433.297197] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820, min cdclk 256910
<7> [433.297322] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0
<7> [433.297448] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [433.297576] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [433.297712] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0
<7> [433.297836] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [433.297959] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: fracen: yes,
<7> [433.298081] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] quot: 40960, rem: 0, den: 1,
<7> [433.298202] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 140, tx_clk_div: 0.
<7> [433.298321] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state:
<7> [433.298443] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21
<7> [433.298564] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7> [433.298694] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [433.298816] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [433.298937] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7> [433.299057] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7> [433.299182] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [433.299307] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [433.299431] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [433.299558] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [433.299691] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [433.299816] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [433.299939] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [433.300067] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [433.300193] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [433.300317] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [433.300441] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [433.300563] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [433.300771] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [433.300897] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no
<7> [433.301027] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no
<7> [433.301157] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no
<7> [433.301280] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no
<7> [433.301403] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no
<7> [433.301529] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no
<7> [433.301996] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]
<7> [433.504022] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:508:eDP-1] set backlight PWM = 0
<7> [433.505005] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A
<7> [433.511257] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 turn panel power off
<7> [433.511506] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000
<7> [433.511827] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [433.512063] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - short
<7> [433.512335] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [433.563786] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [433.564328] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [433.564491] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A]
<7> [433.564905] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - long
<7> [433.564847] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:507:DDI A/PHY A]
<7> [433.565422] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [433.566019] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:507:DDI A/PHY A]
<7> [433.566647] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0
<7> [433.567191] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A
<7> [433.567596] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:507:DDI A/PHY A]
<7> [433.567844] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:516:DDI B/PHY B]
<7> [433.568084] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:518:DP-MST A]
<7> [433.568327] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:519:DP-MST B]
<7> [433.568505] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:520:DP-MST C]
<7> [433.568663] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:521:DP-MST D]
<7> [433.568804] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:534:DDI TC1/PHY TC1]
<7> [433.568945] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:536:DP-MST A]
<7> [433.569086] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:537:DP-MST B]
<7> [433.569227] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:538:DP-MST C]
<7> [433.569365] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:539:DP-MST D]
<7> [433.569505] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:543:DDI TC2/PHY TC2]
<7> [433.569659] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:547:DDI TC3/PHY TC3]
<7> [433.569801] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:549:DP-MST A]
<7> [433.569925] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:550:DP-MST B]
<7> [433.570043] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:551:DP-MST C]
<7> [433.570160] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:552:DP-MST D]
<7> [433.570276] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:556:DDI TC4/PHY TC4]
<7> [433.570394] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:558:DP-MST A]
<7> [433.570512] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:559:DP-MST B]
<7> [433.570645] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:560:DP-MST C]
<7> [433.570760] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:561:DP-MST D]
<7> [433.570957] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A
<7> [433.572328] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A]
<7> [433.572485] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0
<7> [433.574480] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 turn panel power on
<7> [433.574647] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power cycle (490 ms remaining)
<7> [434.071649] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [434.137134] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [434.137986] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power on
<7> [434.138701] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [434.170625] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [434.171204] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - long
<7> [434.171724] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [434.172368] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:507:DDI A/PHY A]
<7> [434.339528] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [434.340582] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 turning VDD on
<7> [434.341296] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [434.344745] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80
<7> [434.346185] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [434.346794] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07
<7> [434.347893] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [434.348948] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [434.349970] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Clock recovery OK
<7> [434.350084] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using DP training pattern TPS3
<7> [434.351422] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [434.351550] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4
<7> [434.352255] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A
<7> [434.352519] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]
<7> [434.352629] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A
<7> [434.352795] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:508:eDP-1] set backlight PWM = 13892
<7> [434.364171] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:508:eDP-1]
<7> [434.364428] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A]
<7> [434.368295] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [434.368917] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [434.369078] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [434.369202] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [434.369343] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [434.369472] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [434.369608] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [434.369739] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [434.369866] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [434.369997] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [434.370124] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [434.370252] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [434.375025] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [434.376385] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [434.386351] Console: switching to colour frame buffer device 180x56
Created at 2026-03-26 00:42:35