Results for igt@kms_force_connector_basic@force-edid

Result: Pass

git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.29 seconds
Igt-Version 
IGT-Version: 2.3-g23fdc238d (x86_64) (Linux: 7.0.0-rc3-CI_DRM_18143-g45618ec6cfed+ x86_64)
Out 
Using IGT_SRANDOM=1773411820 for randomisation
Opened device: /dev/dri/card0
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.294s)
Err 
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.294s)
Dmesg
<6> [174.299753] Console: switching to colour dummy device 80x25
<6> [174.299984] [IGT] kms_force_connector_basic: executing
<7> [174.312940] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [174.314178] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [174.327904] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [174.329061] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:528:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [174.329069] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [174.329073] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [174.333318] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<7> [174.333341] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [174.333343] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [174.337573] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<7> [174.337607] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [174.337609] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [174.341817] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<6> [174.342013] [IGT] kms_force_connector_basic: starting subtest force-edid
<7> [174.342293] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:528:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [174.342299] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [174.342302] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [174.402585] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [174.408381] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [174.408396] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [174.408670] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [174.414227] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [174.414235] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [174.414453] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] status updated from disconnected to connected
<7> [174.414504] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] probed modes:
<7> [174.414507] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [174.414509] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [174.414511] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [174.414514] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [174.414516] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [174.414529] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [174.414608] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [174.414640] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [174.414643] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [174.475118] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [174.480790] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [174.480807] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [174.481059] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [174.486544] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [174.486552] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [174.486723] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] probed modes:
<7> [174.486726] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [174.486728] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [174.486731] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [174.486734] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [174.486737] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [174.487136] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:528:HDMI-A-1] EDID override set
<7> [174.487155] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [174.487158] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [174.487659] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:528:HDMI-A-1] ELD monitor IGT
<7> [174.487664] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:528:HDMI-A-1] ELD size 24, SAD count 0
<7> [174.548586] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [174.554260] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [174.554375] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [174.554383] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [174.554388] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] probed modes:
<7> [174.554391] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [174.554394] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [174.554397] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [174.554400] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [174.554404] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [174.554497] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:528:HDMI-A-1] EDID override reset
<7> [174.554662] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [174.554665] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [174.615577] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [174.621277] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [174.621288] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [174.621603] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [174.627174] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [174.627180] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [174.627379] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:528:HDMI-A-1] EDID changed, epoch counter 2
<7> [174.627436] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [174.627450] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [174.627460] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] probed modes:
<7> [174.627463] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [174.627465] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [174.627467] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [174.627469] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [174.627471] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [174.627620] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:528:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [174.627627] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [174.627631] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [174.631874] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] status updated from connected to disconnected
<7> [174.631881] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<7> [174.631916] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [174.631919] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [174.632094] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [174.632141] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [174.636162] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<6> [174.636476] [IGT] kms_force_connector_basic: finished subtest force-edid, SUCCESS
<7> [174.637038] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [174.638478] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:507:eDP-1] force updated from 0 to 0 or reprobing
<7> [174.638484] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1]
<7> [174.638487] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1]
<7> [174.639263] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [174.639692] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [174.639839] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [174.639982] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [174.640128] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 60 Hz
<7> [174.640132] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [174.640135] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor
<7> [174.640137] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0
<7> [174.640147] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: yes
<7> [174.640277] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [174.640401] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [174.640864] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes:
<7> [174.640867] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2400": 60 596200 3840 3888 3920 4000 2400 2403 2408 2484 0x48 0xa
<7> [174.640888] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1]
<7> [174.640891] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1]
<7> [174.641454] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [174.641878] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [174.642013] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [174.642144] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [174.642288] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 60 Hz
<7> [174.642292] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [174.642294] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor
<7> [174.642296] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0
<7> [174.642305] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: yes
<7> [174.642440] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [174.642581] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [174.643027] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes:
<7> [174.643029] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2400": 60 596200 3840 3888 3920 4000 2400 2403 2408 2484 0x48 0xa
<7> [174.643104] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:507:eDP-1] EDID override reset
<7> [174.643118] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1]
<7> [174.643120] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1]
<7> [174.643673] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [174.644069] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [174.644222] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [174.644351] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [174.644496] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 60 Hz
<7> [174.644500] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [174.644502] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor
<7> [174.644505] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0
<7> [174.644513] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: yes
<7> [174.644661] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [174.644791] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [174.645226] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes:
<7> [174.645228] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2400": 60 596200 3840 3888 3920 4000 2400 2403 2408 2484 0x48 0xa
<7> [174.645303] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:516:DP-1] EDID override reset
<7> [174.645314] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1]
<7> [174.645317] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:516:DP-1]
<7> [174.649542] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] disconnected
<7> [174.649646] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:528:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [174.649649] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [174.649652] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [174.653871] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<7> [174.653891] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [174.653894] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [174.658088] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<7> [174.658152] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:528:HDMI-A-1] EDID override reset
<7> [174.658163] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [174.658165] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [174.662376] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<7> [174.662441] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:534:DP-2] EDID override reset
<7> [174.662452] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2]
<7> [174.662454] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:534:DP-2]
<7> [174.662733] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected
<7> [174.662795] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:543:DP-3] EDID override reset
<7> [174.662805] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3]
<7> [174.662808] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:543:DP-3]
<7> [174.663048] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected
<7> [174.663104] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:552:DP-4] EDID override reset
<7> [174.663114] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4]
<7> [174.663116] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:552:DP-4]
<7> [174.663351] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4] disconnected
<7> [174.663407] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:561:DP-5] EDID override reset
<7> [174.663417] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:561:DP-5]
<7> [174.663419] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:561:DP-5]
<7> [174.663672] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:561:DP-5] disconnected
<6> [174.664057] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [174.664538] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [174.718498] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [174.718514] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [174.718698] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1]
<7> [174.718718] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1]
<7> [174.719934] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [174.721217] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [174.721816] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [174.722236] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [174.722607] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 60 Hz
<7> [174.722618] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [174.722624] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor
<7> [174.722630] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0
<7> [174.722663] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: yes
<7> [174.722959] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [174.723202] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [174.723983] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes:
<7> [174.723992] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2400": 60 596200 3840 3888 3920 4000 2400 2403 2408 2484 0x48 0xa
<7> [174.724000] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1]
<7> [174.724006] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:516:DP-1]
<7> [174.728403] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] disconnected
<7> [174.728418] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [174.728424] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [174.732887] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<7> [174.732900] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2]
<7> [174.732906] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:534:DP-2]
<7> [174.733452] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected
<7> [174.733462] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3]
<7> [174.733469] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:543:DP-3]
<7> [174.734009] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected
<7> [174.734021] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4]
<7> [174.734026] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:552:DP-4]
<7> [174.734591] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4] disconnected
<7> [174.734603] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:561:DP-5]
<7> [174.734609] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:561:DP-5]
<7> [174.735225] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:561:DP-5] disconnected
<7> [174.735234] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] enabled? yes
<7> [174.735242] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:516:DP-1] enabled? no
<7> [174.735246] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:528:HDMI-A-1] enabled? no
<7> [174.735250] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:DP-2] enabled? no
<7> [174.735254] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:DP-3] enabled? no
<7> [174.735258] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:552:DP-4] enabled? no
<7> [174.735261] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:561:DP-5] enabled? no
<7> [174.735320] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [174.735352] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] found preferred mode: 3840x2400
<7> [174.735358] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3840x2400 config
<7> [174.735398] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 3840x2400 set (0,0)
<7> [174.751667] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [174.768497] Console: switching to colour frame buffer device 240x75
Created at 2026-03-14 16:30:44