Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.36 seconds
Igt-Version 
IGT-Version: 2.3-g15cc05645 (x86_64) (Linux: 7.0.0-rc2-CI_DRM_18096-g704ff20b65b8+ x86_64)
Out 
Using IGT_SRANDOM=1772714103 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.357s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.357s)
Dmesg
<7> [210.533300] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00010000, pins 0x00000200, long 0x00000000
<7> [210.533573] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [210.533794] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [210.538387] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [210.542852] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_TC1
<6> [210.548642] Console: switching to colour dummy device 80x25
<6> [210.548889] [IGT] kms_force_connector_basic: executing
<7> [210.557874] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [210.558862] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [210.570966] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [210.571883] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:528:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [210.571891] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [210.571895] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [210.576132] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<7> [210.576153] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [210.576155] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [210.580372] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<7> [210.580418] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [210.580420] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [210.584612] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<6> [210.584846] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [210.585092] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:528:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [210.585096] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [210.585098] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [210.631504] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00010000, pins 0x00000200, long 0x00000000
<7> [210.632270] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [210.632983] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [210.633678] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_TC1
<7> [210.638934] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [210.643811] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [210.649463] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [210.649476] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [210.649598] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [210.655045] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [210.655050] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [210.655172] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] status updated from disconnected to connected
<7> [210.655212] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] probed modes:
<7> [210.655214] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [210.655217] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [210.655219] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [210.655221] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [210.655223] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [210.655235] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [210.655281] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [210.655308] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [210.655311] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [210.679057] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_TC1
<7> [210.715337] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [210.720985] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [210.720994] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [210.721142] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [210.726609] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [210.726616] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [210.726942] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] probed modes:
<7> [210.726945] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [210.726948] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [210.726950] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [210.726952] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [210.726954] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [210.727102] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:528:HDMI-A-1] EDID override set
<7> [210.727124] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [210.727127] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [210.727301] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:528:HDMI-A-1] ELD monitor IGT
<7> [210.727304] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:528:HDMI-A-1] ELD size 24, SAD count 0
<7> [210.729864] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00010000, pins 0x00000200, long 0x00000000
<7> [210.730584] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [210.731203] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [210.731686] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_TC1
<7> [210.737385] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [210.786800] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [210.792480] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [210.792612] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [210.792622] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [210.792629] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] probed modes:
<7> [210.792631] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [210.792635] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [210.792638] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [210.792641] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [210.792645] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [210.792647] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [210.792746] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:528:HDMI-A-1] EDID override set
<7> [210.792775] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [210.792779] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [210.792937] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:528:HDMI-A-1] ELD monitor IGT
<7> [210.792940] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:528:HDMI-A-1] ELD size 24, SAD count 0
<7> [210.792942] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:528:HDMI-A-1] EDID changed, epoch counter 4
<7> [210.827971] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00010000, pins 0x00000200, long 0x00000000
<7> [210.828733] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [210.829518] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [210.834373] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [210.851334] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [210.856886] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [210.856957] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [210.856964] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] probed modes:
<7> [210.856967] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [210.856969] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [210.856971] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [210.856973] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [210.856974] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [210.862080] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:528:HDMI-A-1] EDID override reset
<7> [210.862098] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [210.862100] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [210.920792] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [210.926517] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [210.926527] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [210.926792] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [210.926464] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00010000, pins 0x00000200, long 0x00000000
<7> [210.927429] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [210.928212] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [210.932693] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [210.932698] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [210.932827] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:528:HDMI-A-1] EDID changed, epoch counter 5
<7> [210.932865] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [210.932871] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [210.932875] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] probed modes:
<7> [210.932878] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [210.932880] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [210.932881] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [210.932883] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [210.932885] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [210.933026] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:528:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [210.933031] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [210.933034] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [210.933659] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 20 00 00
<7> [210.937273] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] status updated from connected to disconnected
<7> [210.937280] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<7> [210.937298] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [210.937333] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [210.937352] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [210.937355] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [210.938505] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c24480 (2)
<7> [210.939498] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c24480 (1)
<7> [210.939508] i915 0000:00:02.0: [drm:drm_dp_mst_hpd_irq_handle_event [drm_display_helper]] Got RSN: pn: 2 avail_pbn 0
<7> [210.939683] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c24480 (2)
<7> [210.939693] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c24480 (1)
<7> [210.941553] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<6> [210.941815] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [210.942262] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [210.943552] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:507:eDP-1] force updated from 0 to 0 or reprobing
<7> [210.943557] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1]
<7> [210.943560] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1]
<7> [210.944166] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [210.944536] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 20 00 00
<7> [210.944559] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [210.944688] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [210.944844] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [210.944992] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [210.944996] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor
<7> [210.945000] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0
<7> [210.945013] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: no
<7> [210.945145] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [210.945276] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [210.945758] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes:
<7> [210.945761] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [210.945783] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1]
<7> [210.945786] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1]
<7> [210.946350] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [210.946767] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [210.946901] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [210.947029] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [210.947175] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [210.947178] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor
<7> [210.947181] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0
<7> [210.947192] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: no
<7> [210.947317] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [210.947445] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [210.947914] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes:
<7> [210.947916] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [210.947993] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:507:eDP-1] EDID override reset
<7> [210.948004] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1]
<7> [210.948007] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1]
<7> [210.948555] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [210.948969] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [210.949033] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c24480 (2)
<7> [210.949097] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [210.949225] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [210.949364] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [210.949367] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor
<7> [210.949370] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0
<7> [210.949380] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: no
<7> [210.949508] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [210.949637] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [210.949980] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c24480 (1)
<7> [210.949990] i915 0000:00:02.0: [drm:drm_dp_mst_hpd_irq_handle_event [drm_display_helper]] Got RSN: pn: 2 avail_pbn 0
<7> [210.950100] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes:
<7> [210.950104] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [210.950145] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c24480 (2)
<7> [210.950155] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c24480 (1)
<7> [210.950208] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:516:DP-1] EDID override reset
<7> [210.950225] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1]
<7> [210.950229] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:516:DP-1]
<7> [210.954419] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] disconnected
<7> [210.954517] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:528:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [210.954520] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [210.954523] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [210.955041] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [210.958755] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<7> [210.958776] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [210.958780] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [210.962965] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<7> [210.963026] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:528:HDMI-A-1] EDID override reset
<7> [210.963037] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [210.963039] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [210.967241] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<7> [210.967305] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:534:DP-2] EDID override reset
<7> [210.967315] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2]
<7> [210.967317] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:534:DP-2]
<7> [210.970593] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 12 0a c4 01 00 05 01 83 02 00 00 00 00 00 04
<7> [210.977096] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:534:DP-2][ENCODER:533:DDI TC1/PHY TC1][DPRX] LTTPR common capabilities: 20 1e 80 aa 04 00 01 03
<7> [210.979703] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:534:DP-2][ENCODER:533:DDI TC1/PHY TC1][LTTPR 1] PHY capabilities: 04 03 00
<7> [210.980821] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: LTTPR 1: OUI 98-4f-ee dev-ID GBR HW-rev 10.0 SW-rev 2.14 quirks 0x0000
<7> [210.983106] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 12 0a c4 01 00 05 01 83 02 00 00 00 00 00 04
<7> [210.985266] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DP branch: OUI 90-cc-24 dev-ID SYNA#" HW-rev 1.0 SW-rev 2.27 quirks 0x0028
<7> [210.991248] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD DFP: 08 08 0d
<7> [210.993213] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:533:DDI TC1/PHY TC1] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [211.007355] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000, 2000000
<7> [211.007506] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
<7> [211.007653] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
<7> [211.007794] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected
<7> [211.007880] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:543:DP-3] EDID override reset
<7> [211.007894] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3]
<7> [211.007897] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:543:DP-3]
<7> [211.008146] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected
<7> [211.008205] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:552:DP-4] EDID override reset
<7> [211.008215] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4]
<7> [211.008217] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:552:DP-4]
<7> [211.008455] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4] disconnected
<7> [211.008514] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:561:DP-5] EDID override reset
<7> [211.008525] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:561:DP-5]
<7> [211.008527] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:561:DP-5]
<7> [211.008763] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:561:DP-5] disconnected
<7> [211.008824] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:572:DP-6] EDID override reset
<7> [211.008834] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:572:DP-6]
<7> [211.008838] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff888127cbc000 (2)
<7> [211.008849] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff888127cbc000 (1)
<7> [211.008859] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff888127cbc000 (2)
<7> [211.008870] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c24480 (2)
<7> [211.023327] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00010000, pins 0x00000200, long 0x00000000
<7> [211.023640] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [211.023872] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [211.028315] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [211.030801] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c24480 (3)
<7> [211.030820] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c24480 (2)
<7> [211.030833] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c24480 (1)
<7> [211.030851] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c24480 (2)
<7> [211.036574] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [211.038986] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c24480 (3)
<7> [211.043479] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c24480 (2)
<7> [211.048391] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [211.050736] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c24480 (3)
<7> [211.055220] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c24480 (2)
<7> [211.060013] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [211.062432] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c24480 (3)
<7> [211.066834] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c24480 (2)
<7> [211.066846] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c24480 (1)
<7> [211.066861] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff888127cbc000 (1)
<7> [211.066871] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:572:DP-6] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [211.066874] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:572:DP-6] ELD monitor DELL U2412M
<7> [211.066877] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:572:DP-6] ELD size 32, SAD count 0
<7> [211.066996] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:572:DP-6] probed modes:
<7> [211.066999] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [211.067002] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [211.067005] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
<7> [211.067008] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
<7> [211.067011] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [211.067013] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [211.067016] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [211.067019] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [211.067022] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [211.067024] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
<7> [211.067128] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:575:DP-7] EDID override reset
<7> [211.067142] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:575:DP-7]
<7> [211.067146] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff8881273d4000 (2)
<7> [211.067159] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff8881273d4000 (1)
<7> [211.067169] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff8881273d4000 (2)
<7> [211.067181] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c24480 (2)
<7> [211.072718] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [211.075112] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c24480 (3)
<7> [211.075125] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c24480 (2)
<7> [211.075142] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c24480 (1)
<7> [211.075165] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c24480 (2)
<7> [211.080970] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [211.083333] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c24480 (3)
<7> [211.087860] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c24480 (2)
<7> [211.092639] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [211.094973] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c24480 (3)
<7> [211.099426] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c24480 (2)
<7> [211.104235] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [211.106656] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c24480 (3)
<7> [211.111029] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c24480 (2)
<7> [211.111043] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c24480 (1)
<7> [211.111064] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff8881273d4000 (1)
<7> [211.111075] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:575:DP-7] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [211.111079] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:575:DP-7] ELD monitor DELL U2412M
<7> [211.111082] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:575:DP-7] ELD size 32, SAD count 0
<7> [211.111193] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:575:DP-7] probed modes:
<7> [211.111196] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [211.111200] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [211.111202] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
<7> [211.111205] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
<7> [211.111208] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [211.111210] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [211.111213] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [211.111216] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [211.111219] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [211.111221] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
<7> [211.111321] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:577:DP-8] EDID override reset
<7> [211.111336] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:577:DP-8]
<7> [211.111340] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff88811c5fc000 (2)
<7> [211.111354] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff88811c5fc000 (1)
<7> [211.111365] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:577:DP-8] disconnected
<6> [211.111992] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [211.112658] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [211.116062] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [211.121685] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00010000, pins 0x00000200, long 0x00000000
<7> [211.121926] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [211.122153] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [211.126155] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [211.126725] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [211.126732] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [211.127225] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1]
<7> [211.127230] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1]
<7> [211.127914] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [211.128348] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [211.128499] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [211.128647] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [211.128816] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [211.128819] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor
<7> [211.128822] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0
<7> [211.128833] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: no
<7> [211.128952] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [211.129072] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [211.129537] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes:
<7> [211.129541] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [211.129544] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1]
<7> [211.129548] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:516:DP-1]
<7> [211.133771] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] disconnected
<7> [211.133775] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [211.133777] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [211.137958] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<7> [211.137961] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2]
<7> [211.137964] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:534:DP-2]
<7> [211.141253] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 12 0a c4 01 00 05 01 83 02 00 00 00 00 00 04
<7> [211.147906] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:534:DP-2][ENCODER:533:DDI TC1/PHY TC1][DPRX] LTTPR common capabilities: 20 1e 80 aa 04 00 01 03
<7> [211.150539] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:534:DP-2][ENCODER:533:DDI TC1/PHY TC1][LTTPR 1] PHY capabilities: 04 03 00
<7> [211.151654] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: LTTPR 1: OUI 98-4f-ee dev-ID GBR HW-rev 10.0 SW-rev 2.14 quirks 0x0000
<7> [211.153935] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 12 0a c4 01 00 05 01 83 02 00 00 00 00 00 04
<7> [211.156154] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DP branch: OUI 90-cc-24 dev-ID SYNA#" HW-rev 1.0 SW-rev 2.27 quirks 0x0028
<7> [211.162256] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD DFP: 08 08 0d
<7> [211.164235] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:533:DDI TC1/PHY TC1] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [211.178632] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000, 2000000
<7> [211.178797] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
<7> [211.178946] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
<7> [211.179087] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected
<7> [211.179091] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3]
<7> [211.179093] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:543:DP-3]
<7> [211.179353] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected
<7> [211.179356] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4]
<7> [211.179358] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:552:DP-4]
<7> [211.179591] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4] disconnected
<7> [211.179594] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:561:DP-5]
<7> [211.179597] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:561:DP-5]
<7> [211.179871] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:561:DP-5] disconnected
<7> [211.179875] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:572:DP-6]
<7> [211.179878] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff888127cbc000 (2)
<7> [211.179894] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff888127cbc000 (1)
<7> [211.179906] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff888127cbc000 (2)
<7> [211.179916] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff888127cbc000 (1)
<7> [211.179926] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff888127cbc000 (2)
<7> [211.179937] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c24480 (2)
<7> [211.219871] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00010000, pins 0x00000200, long 0x00000000
<7> [211.220636] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [211.221365] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [211.226120] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [211.228558] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c24480 (3)
<7> [211.228574] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c24480 (2)
<7> [211.228786] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c24480 (1)
<7> [211.228845] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c24480 (2)
<7> [211.231986] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_TC1
<7> [211.232584] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_TC1
<7> [211.236295] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [211.238542] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c24480 (3)
<7> [211.242921] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c24480 (2)
<7> [211.247726] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [211.250109] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c24480 (3)
<7> [211.254603] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c24480 (2)
<7> [211.259412] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [211.261764] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c24480 (3)
<7> [211.266166] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c24480 (2)
<7> [211.266187] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c24480 (1)
<7> [211.266210] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff888127cbc000 (1)
<7> [211.266221] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:572:DP-6] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [211.266225] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:572:DP-6] ELD monitor DELL U2412M
<7> [211.266228] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:572:DP-6] ELD size 32, SAD count 0
<7> [211.266351] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:572:DP-6] probed modes:
<7> [211.266354] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [211.266358] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [211.266361] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
<7> [211.266364] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
<7> [211.266366] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [211.266369] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [211.266372] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [211.266375] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [211.266378] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [211.266381] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
<7> [211.266384] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:575:DP-7]
<7> [211.266389] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff8881273d4000 (2)
<7> [211.266401] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff8881273d4000 (1)
<7> [211.266412] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff8881273d4000 (2)
<7> [211.266423] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c24480 (2)
<7> [211.272089] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [211.274438] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c24480 (3)
<7> [211.274450] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c24480 (2)
<7> [211.274463] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c24480 (1)
<7> [211.274478] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c24480 (2)
<7> [211.280344] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [211.282684] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c24480 (3)
<7> [211.287099] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c24480 (2)
<7> [211.291903] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [211.294268] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c24480 (3)
<7> [211.298672] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c24480 (2)
<7> [211.303429] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [211.305795] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c24480 (3)
<7> [211.310193] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c24480 (2)
<7> [211.310201] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c24480 (2)
<7> [211.310214] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff8881273d4000 (1)
<7> [211.310224] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:575:DP-7] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [211.310227] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:575:DP-7] ELD monitor DELL U2412M
<7> [211.310229] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:575:DP-7] ELD size 32, SAD count 0
<7> [211.310328] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:575:DP-7] probed modes:
<7> [211.310330] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [211.310333] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [211.310336] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
<7> [211.310339] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
<7> [211.310342] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [211.310345] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [211.310348] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [211.310350] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [211.310353] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [211.310356] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
<7> [211.310359] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:577:DP-8]
<7> [211.310363] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff88811c5fc000 (2)
<7> [211.310375] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff88811c5fc000 (1)
<7> [211.310384] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:577:DP-8] disconnected
<7> [211.310388] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] enabled? yes
<7> [211.310391] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:516:DP-1] enabled? no
<7> [211.310394] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:528:HDMI-A-1] enabled? no
<7> [211.310396] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:DP-2] enabled? no
<7> [211.310398] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:DP-3] enabled? no
<7> [211.310400] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:552:DP-4] enabled? no
<7> [211.310402] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:561:DP-5] enabled? no
<7> [211.310404] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:572:DP-6] enabled? yes
<7> [211.310406] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:575:DP-7] enabled? yes
<7> [211.310409] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:577:DP-8] enabled? no
<7> [211.310439] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [211.310456] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] found preferred mode: 2880x1800
<7> [211.310462] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:572:DP-6] found preferred mode: 1920x1200
<7> [211.310468] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:575:DP-7] found preferred mode: 1920x1200
<7> [211.310470] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7> [211.310602] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 2880x1800 set (0,0)
<7> [211.310609] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:268:pipe B] desired mode 1920x1200 set (0,0)
<7> [211.310614] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:386:pipe C] desired mode 1920x1200 set (0,0)
<7> [211.315052] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [211.317171] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00010000, pins 0x00000200, long 0x00000000
<7> [211.317412] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [211.317647] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [211.321744] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [211.324937] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [211.339007] Console: switching to colour frame buffer device 180x56
Created at 2026-03-06 11:05:43