Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.36 seconds
Igt-Version 
IGT-Version: 2.3-g4e59b8e77 (x86_64) (Linux: 7.0.0-rc1-CI_DRM_18066-g1ad945dbcb06+ x86_64)
Out 
Using IGT_SRANDOM=1772289528 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.359s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.359s)
Dmesg
<6> [217.896659] Console: switching to colour dummy device 80x25
<6> [217.897079] [IGT] kms_force_connector_basic: executing
<7> [217.904233] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [217.905263] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [217.917824] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00010000, pins 0x00000200, long 0x00000000
<7> [217.918051] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [217.918271] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [217.919076] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_TC1
<7> [217.924921] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [217.927953] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [217.929160] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:528:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [217.929167] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [217.929172] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [217.933425] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<7> [217.933451] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [217.933454] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [217.937664] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<7> [217.937723] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [217.937727] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [217.941973] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<6> [217.942415] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [217.942704] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:528:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [217.942721] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [217.942724] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [218.004283] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [218.006875] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_TC1
<7> [218.010026] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [218.010046] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [218.010371] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [218.015934] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [218.015940] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [218.016128] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] status updated from disconnected to connected
<7> [218.016178] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] probed modes:
<7> [218.016182] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [218.016187] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [218.016191] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [218.016195] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [218.016199] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [218.016235] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [218.016240] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [218.016184] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00010000, pins 0x00000200, long 0x00000000
<7> [218.017002] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [218.017723] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [218.017647] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [218.017814] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [218.018291] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_TC1
<7> [218.024296] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [218.076280] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [218.081907] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [218.081919] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [218.082132] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [218.087606] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [218.087610] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [218.087777] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] probed modes:
<7> [218.087781] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [218.087784] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [218.087786] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [218.087789] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [218.087791] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [218.087933] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:528:HDMI-A-1] EDID override set
<7> [218.087956] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [218.090293] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [218.090465] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:528:HDMI-A-1] ELD monitor IGT
<7> [218.090469] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:528:HDMI-A-1] ELD size 24, SAD count 0
<7> [218.114894] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00010000, pins 0x00000200, long 0x00000000
<7> [218.115652] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [218.116360] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [218.121033] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [218.148748] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [218.154385] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [218.154476] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [218.154484] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [218.154488] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] probed modes:
<7> [218.154491] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [218.154493] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [218.154496] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [218.154498] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [218.154501] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [218.154503] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [218.154591] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:528:HDMI-A-1] EDID override set
<7> [218.154608] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [218.154611] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [218.154773] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:528:HDMI-A-1] ELD monitor IGT
<7> [218.154775] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:528:HDMI-A-1] ELD size 24, SAD count 0
<7> [218.154777] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:528:HDMI-A-1] EDID changed, epoch counter 4
<7> [218.212466] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00010000, pins 0x00000200, long 0x00000000
<7> [218.213275] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [218.213222] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [218.213996] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [218.219258] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [218.219368] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [218.219378] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] probed modes:
<7> [218.219381] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [218.219386] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [218.219390] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [218.219393] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [218.219395] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [218.219477] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:528:HDMI-A-1] EDID override reset
<7> [218.219494] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [218.219497] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [218.219679] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 20 00 00
<7> [218.225284] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c27440 (2)
<7> [218.226382] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c27440 (1)
<7> [218.226392] i915 0000:00:02.0: [drm:drm_dp_mst_hpd_irq_handle_event [drm_display_helper]] Got RSN: pn: 2 avail_pbn 0
<7> [218.226641] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c27440 (2)
<7> [218.226651] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c27440 (1)
<7> [218.231890] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 20 00 00
<7> [218.236222] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c27440 (2)
<7> [218.237134] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c27440 (1)
<7> [218.237151] i915 0000:00:02.0: [drm:drm_dp_mst_hpd_irq_handle_event [drm_display_helper]] Got RSN: pn: 2 avail_pbn 0
<7> [218.237340] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c27440 (2)
<7> [218.237357] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c27440 (1)
<7> [218.241975] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [218.281281] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [218.286869] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [218.286877] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [218.287002] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [218.292462] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [218.292467] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [218.292587] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:528:HDMI-A-1] EDID changed, epoch counter 5
<7> [218.292624] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [218.292630] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [218.292634] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] probed modes:
<7> [218.292637] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [218.292639] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [218.292642] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [218.292644] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [218.292647] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [218.292772] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:528:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [218.292775] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [218.292779] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [218.296983] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] status updated from connected to disconnected
<7> [218.296990] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<7> [218.297019] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [218.297022] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [218.297189] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [218.297236] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [218.301269] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<6> [218.301768] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [218.302295] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [218.303316] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:507:eDP-1] force updated from 0 to 0 or reprobing
<7> [218.303321] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1]
<7> [218.303325] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1]
<7> [218.303892] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [218.304316] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [218.304454] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [218.304598] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [218.304759] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [218.304762] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor
<7> [218.304765] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0
<7> [218.304776] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: no
<7> [218.304904] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [218.305034] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [218.305773] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes:
<7> [218.305777] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [218.305800] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1]
<7> [218.305803] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1]
<7> [218.306353] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [218.306753] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [218.306882] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [218.307006] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [218.307142] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [218.307145] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor
<7> [218.307147] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0
<7> [218.307156] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: no
<7> [218.307281] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [218.307407] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [218.308078] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes:
<7> [218.308081] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [218.308147] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:507:eDP-1] EDID override reset
<7> [218.308158] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1]
<7> [218.308161] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1]
<7> [218.308708] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [218.309092] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [218.309221] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [218.309348] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [218.309479] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [218.309482] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor
<7> [218.309484] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0
<7> [218.309492] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: no
<7> [218.309611] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [218.309825] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [218.310529] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes:
<7> [218.310532] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [218.310607] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:516:DP-1] EDID override reset
<7> [218.310618] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1]
<7> [218.310622] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:516:DP-1]
<7> [218.310722] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00010000, pins 0x00000200, long 0x00000000
<7> [218.310952] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [218.311182] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [218.314841] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] disconnected
<7> [218.314964] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:528:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [218.314969] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [218.314973] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [218.315681] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [218.319235] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<7> [218.319256] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [218.319259] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [218.323469] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<7> [218.323533] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:528:HDMI-A-1] EDID override reset
<7> [218.323543] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [218.323546] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [218.327773] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<7> [218.327842] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:534:DP-2] EDID override reset
<7> [218.327852] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2]
<7> [218.327856] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:534:DP-2]
<7> [218.331119] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 12 0a c4 01 00 05 01 83 02 00 00 00 00 00 04
<7> [218.337600] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:534:DP-2][ENCODER:533:DDI TC1/PHY TC1][DPRX] LTTPR common capabilities: 20 1e 80 aa 04 00 01 03
<7> [218.340162] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:534:DP-2][ENCODER:533:DDI TC1/PHY TC1][LTTPR 1] PHY capabilities: 04 03 00
<7> [218.341231] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: LTTPR 1: OUI 98-4f-ee dev-ID GBR HW-rev 10.0 SW-rev 2.14 quirks 0x0000
<7> [218.343540] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 12 0a c4 01 00 05 01 83 02 00 00 00 00 00 04
<7> [218.345662] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DP branch: OUI 90-cc-24 dev-ID SYNA#" HW-rev 1.0 SW-rev 2.27 quirks 0x0028
<7> [218.351656] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD DFP: 08 08 0d
<7> [218.353659] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:533:DDI TC1/PHY TC1] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [218.367852] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000, 2000000
<7> [218.368015] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
<7> [218.368173] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
<7> [218.368300] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected
<7> [218.368382] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:543:DP-3] EDID override reset
<7> [218.368395] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3]
<7> [218.368398] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:543:DP-3]
<7> [218.368656] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected
<7> [218.368777] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:552:DP-4] EDID override reset
<7> [218.368792] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4]
<7> [218.368796] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:552:DP-4]
<7> [218.369080] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4] disconnected
<7> [218.369141] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:561:DP-5] EDID override reset
<7> [218.369151] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:561:DP-5]
<7> [218.369153] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:561:DP-5]
<7> [218.369386] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:561:DP-5] disconnected
<7> [218.369450] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:508:DP-6] EDID override reset
<7> [218.369459] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:DP-6]
<7> [218.369465] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff888116fb1000 (2)
<7> [218.369477] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff888116fb1000 (1)
<7> [218.369486] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff888116fb1000 (2)
<7> [218.369497] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c27440 (2)
<7> [218.409315] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00010000, pins 0x00000200, long 0x00000000
<7> [218.410074] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [218.410751] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [218.415275] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [218.417612] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c27440 (3)
<7> [218.417625] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c27440 (2)
<7> [218.417641] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c27440 (1)
<7> [218.417663] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c27440 (2)
<7> [218.423265] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [218.425500] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c27440 (3)
<7> [218.429845] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c27440 (2)
<7> [218.434610] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [218.437014] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c27440 (3)
<7> [218.441486] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c27440 (2)
<7> [218.446419] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [218.448829] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c27440 (3)
<7> [218.453310] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c27440 (2)
<7> [218.453326] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c27440 (2)
<7> [218.453351] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff888116fb1000 (1)
<7> [218.453367] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:DP-6] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [218.453395] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:DP-6] ELD monitor DELL U2412M
<7> [218.453399] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:DP-6] ELD size 32, SAD count 0
<7> [218.453538] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:DP-6] probed modes:
<7> [218.453542] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [218.453545] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [218.453549] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
<7> [218.453552] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
<7> [218.453555] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [218.453558] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [218.453561] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [218.453564] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [218.453567] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [218.453570] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
<7> [218.453683] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:574:DP-7] EDID override reset
<7> [218.453697] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:574:DP-7]
<7> [218.453713] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff888127ee4000 (2)
<7> [218.453724] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff888127ee4000 (1)
<7> [218.453733] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff888127ee4000 (2)
<7> [218.453744] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c27440 (2)
<7> [218.459196] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [218.461546] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c27440 (3)
<7> [218.461562] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c27440 (2)
<7> [218.461578] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c27440 (1)
<7> [218.461603] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c27440 (2)
<7> [218.467379] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [218.469741] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c27440 (3)
<7> [218.474163] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c27440 (2)
<7> [218.478912] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [218.481260] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c27440 (3)
<7> [218.485640] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c27440 (2)
<7> [218.490356] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [218.507330] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00010000, pins 0x00000200, long 0x00000000
<7> [218.507568] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [218.507790] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [218.511816] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [218.514187] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c27440 (3)
<7> [218.518623] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c27440 (2)
<7> [218.518637] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c27440 (2)
<7> [218.518667] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff888127ee4000 (1)
<7> [218.518684] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:574:DP-7] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [218.518749] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:574:DP-7] ELD monitor DELL U2412M
<7> [218.518753] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:574:DP-7] ELD size 32, SAD count 0
<7> [218.518902] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:574:DP-7] probed modes:
<7> [218.518911] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [218.518915] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [218.518918] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
<7> [218.518921] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
<7> [218.518929] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [218.518933] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [218.518936] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [218.518939] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [218.518942] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [218.518945] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
<7> [218.519056] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:576:DP-8] EDID override reset
<7> [218.519070] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:576:DP-8]
<7> [218.519075] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff888127ee1000 (2)
<7> [218.519086] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff888127ee1000 (1)
<7> [218.519094] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:576:DP-8] disconnected
<6> [218.519891] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [218.520391] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [218.523695] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [218.523878] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [218.527957] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [218.536340] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [218.536345] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [218.536388] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1]
<7> [218.536392] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1]
<7> [218.536946] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [218.537343] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [218.537475] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [218.537626] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [218.537794] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [218.537798] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor
<7> [218.537800] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0
<7> [218.537810] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: no
<7> [218.537933] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [218.538056] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [218.538754] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes:
<7> [218.538758] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [218.538762] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1]
<7> [218.538765] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:516:DP-1]
<7> [218.542974] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] disconnected
<7> [218.542979] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [218.542982] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [218.547156] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<7> [218.547160] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2]
<7> [218.547163] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:534:DP-2]
<7> [218.550365] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 12 0a c4 01 00 05 01 83 02 00 00 00 00 00 04
<7> [218.556818] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:534:DP-2][ENCODER:533:DDI TC1/PHY TC1][DPRX] LTTPR common capabilities: 20 1e 80 aa 04 00 01 03
<7> [218.559385] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:534:DP-2][ENCODER:533:DDI TC1/PHY TC1][LTTPR 1] PHY capabilities: 04 03 00
<7> [218.560499] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: LTTPR 1: OUI 98-4f-ee dev-ID GBR HW-rev 10.0 SW-rev 2.14 quirks 0x0000
<7> [218.562740] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 12 0a c4 01 00 05 01 83 02 00 00 00 00 00 04
<7> [218.564927] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DP branch: OUI 90-cc-24 dev-ID SYNA#" HW-rev 1.0 SW-rev 2.27 quirks 0x0028
<7> [218.570943] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD DFP: 08 08 0d
<7> [218.572930] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:533:DDI TC1/PHY TC1] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [218.587284] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000, 2000000
<7> [218.587440] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
<7> [218.587597] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
<7> [218.587735] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected
<7> [218.587739] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3]
<7> [218.587742] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:543:DP-3]
<7> [218.588002] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected
<7> [218.588007] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4]
<7> [218.588010] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:552:DP-4]
<7> [218.588246] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4] disconnected
<7> [218.588249] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:561:DP-5]
<7> [218.588252] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:561:DP-5]
<7> [218.588478] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:561:DP-5] disconnected
<7> [218.588481] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:DP-6]
<7> [218.588485] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff888116fb1000 (2)
<7> [218.588495] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff888116fb1000 (1)
<7> [218.588504] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff888116fb1000 (2)
<7> [218.588514] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c27440 (2)
<7> [218.605414] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00010000, pins 0x00000200, long 0x00000000
<7> [218.605638] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [218.605853] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [218.609846] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [218.612158] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c27440 (3)
<7> [218.612172] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c27440 (2)
<7> [218.612187] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c27440 (1)
<7> [218.612211] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c27440 (2)
<7> [218.618072] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [218.620456] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c27440 (3)
<7> [218.624960] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c27440 (2)
<7> [218.629841] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [218.632200] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c27440 (3)
<7> [218.636636] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c27440 (2)
<7> [218.641410] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [218.664735] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [218.668906] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [218.671194] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c27440 (3)
<7> [218.675494] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c27440 (2)
<7> [218.675506] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c27440 (2)
<7> [218.675526] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff888116fb1000 (1)
<7> [218.675541] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:DP-6] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [218.675571] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:DP-6] ELD monitor DELL U2412M
<7> [218.675575] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:DP-6] ELD size 32, SAD count 0
<7> [218.675720] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:DP-6] probed modes:
<7> [218.675726] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [218.675730] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [218.675734] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
<7> [218.675737] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
<7> [218.675740] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [218.675746] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [218.675751] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [218.675755] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [218.675759] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [218.675762] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
<7> [218.675766] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:574:DP-7]
<7> [218.675773] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff888127ee4000 (2)
<7> [218.675784] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff888127ee4000 (1)
<7> [218.675795] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff888127ee4000 (2)
<7> [218.675807] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c27440 (2)
<7> [218.681283] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [218.683586] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c27440 (3)
<7> [218.683600] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c27440 (2)
<7> [218.683622] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c27440 (1)
<7> [218.683645] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c27440 (2)
<7> [218.689452] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [218.691865] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c27440 (3)
<7> [218.696303] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c27440 (2)
<7> [218.701072] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [218.703429] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c27440 (3)
<7> [218.703897] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00010000, pins 0x00000200, long 0x00000000
<7> [218.704154] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [218.708130] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c27440 (2)
<7> [218.712910] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [218.715273] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100c27440 (3)
<7> [218.719681] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c27440 (2)
<7> [218.719696] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100c27440 (2)
<7> [218.719737] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff888127ee4000 (1)
<7> [218.719753] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:574:DP-7] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [218.719760] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:574:DP-7] ELD monitor DELL U2412M
<7> [218.719764] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:574:DP-7] ELD size 32, SAD count 0
<7> [218.719930] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:574:DP-7] probed modes:
<7> [218.719935] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [218.719939] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [218.719943] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
<7> [218.719947] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
<7> [218.719950] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [218.719954] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [218.719958] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [218.719961] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [218.719965] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [218.719969] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
<7> [218.719973] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:576:DP-8]
<7> [218.719978] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff888127ee1000 (2)
<7> [218.719990] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff888127ee1000 (1)
<7> [218.720000] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:576:DP-8] disconnected
<7> [218.720004] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] enabled? yes
<7> [218.720009] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:516:DP-1] enabled? no
<7> [218.720012] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:528:HDMI-A-1] enabled? no
<7> [218.720015] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:DP-2] enabled? no
<7> [218.720018] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:DP-3] enabled? no
<7> [218.720021] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:552:DP-4] enabled? no
<7> [218.720024] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:561:DP-5] enabled? no
<7> [218.720027] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:DP-6] enabled? yes
<7> [218.720030] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:574:DP-7] enabled? yes
<7> [218.720033] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:576:DP-8] enabled? no
<7> [218.720065] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [218.720081] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] found preferred mode: 2880x1800
<7> [218.720089] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:DP-6] found preferred mode: 1920x1200
<7> [218.720095] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:574:DP-7] found preferred mode: 1920x1200
<7> [218.720098] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7> [218.720237] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 2880x1800 set (0,0)
<7> [218.720245] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:268:pipe B] desired mode 1920x1200 set (0,0)
<7> [218.720252] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:386:pipe C] desired mode 1920x1200 set (0,0)
<7> [218.724633] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [218.724804] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:533:DDI TC1/PHY TC1] - short
<7> [218.728912] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [218.736511] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [218.753239] Console: switching to colour frame buffer device 180x56
Created at 2026-02-28 16:42:16