Results for igt@kms_force_connector_basic@force-edid

Result: Pass

git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.29 seconds
Igt-Version 
IGT-Version: 2.3-g063e64ae4 (x86_64) (Linux: 7.0.0-rc1-CI_DRM_18022-g45a3045fc0dc+ x86_64)
Out 
Using IGT_SRANDOM=1771870656 for randomisation
Opened device: /dev/dri/card0
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.290s)
Err 
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.290s)
Dmesg
<6> [171.224544] Console: switching to colour dummy device 80x25
<6> [171.224781] [IGT] kms_force_connector_basic: executing
<7> [171.232126] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [171.233494] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [171.250173] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [171.251841] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:528:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [171.251851] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [171.251857] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [171.256155] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<7> [171.256179] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [171.256182] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [171.260397] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<7> [171.260436] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [171.260440] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [171.264677] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<6> [171.264936] [IGT] kms_force_connector_basic: starting subtest force-edid
<7> [171.265343] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:528:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [171.265348] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [171.265352] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [171.324025] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [171.329625] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [171.329638] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [171.329802] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [171.335235] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [171.335241] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [171.335373] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] status updated from disconnected to connected
<7> [171.335418] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] probed modes:
<7> [171.335421] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [171.335424] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [171.335427] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [171.335430] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [171.335433] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [171.335445] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [171.335513] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [171.335537] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [171.335540] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [171.395566] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [171.401204] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [171.401211] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [171.401339] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [171.406737] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [171.406743] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [171.406911] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] probed modes:
<7> [171.406915] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [171.406918] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [171.406921] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [171.406924] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [171.406926] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [171.407650] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:528:HDMI-A-1] EDID override set
<7> [171.407678] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [171.407684] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [171.408154] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:528:HDMI-A-1] ELD monitor IGT
<7> [171.408158] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:528:HDMI-A-1] ELD size 24, SAD count 0
<7> [171.467562] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [171.473201] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [171.473298] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [171.473307] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [171.473311] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] probed modes:
<7> [171.473314] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [171.473317] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [171.473320] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [171.473323] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [171.473326] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [171.473409] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:528:HDMI-A-1] EDID override reset
<7> [171.473570] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [171.473573] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [171.534566] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [171.540289] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [171.540298] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [171.540616] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [171.546167] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [171.546172] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [171.546294] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:528:HDMI-A-1] EDID changed, epoch counter 2
<7> [171.546334] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [171.546343] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [171.546347] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] probed modes:
<7> [171.546349] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [171.546352] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [171.546354] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [171.546357] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [171.546359] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [171.546466] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:528:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [171.546470] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [171.546473] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [171.550721] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] status updated from connected to disconnected
<7> [171.550750] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<7> [171.550868] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [171.550881] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [171.551486] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [171.551592] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [171.555540] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<6> [171.556044] [IGT] kms_force_connector_basic: finished subtest force-edid, SUCCESS
<7> [171.556767] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [171.558107] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:507:eDP-1] force updated from 0 to 0 or reprobing
<7> [171.558114] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1]
<7> [171.558119] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1]
<7> [171.558793] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [171.559236] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [171.559377] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [171.559516] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [171.559673] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 60 Hz
<7> [171.559677] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [171.559680] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor
<7> [171.559682] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0
<7> [171.559694] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: yes
<7> [171.559831] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [171.559966] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [171.560753] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes:
<7> [171.560757] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2400": 60 596200 3840 3888 3920 4000 2400 2403 2408 2484 0x48 0xa
<7> [171.560781] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1]
<7> [171.560784] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1]
<7> [171.561381] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [171.561823] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [171.561958] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [171.562107] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [171.562253] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 60 Hz
<7> [171.562256] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [171.562258] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor
<7> [171.562261] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0
<7> [171.562269] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: yes
<7> [171.562404] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [171.562538] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [171.563287] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes:
<7> [171.563290] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2400": 60 596200 3840 3888 3920 4000 2400 2403 2408 2484 0x48 0xa
<7> [171.563364] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:507:eDP-1] EDID override reset
<7> [171.563375] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1]
<7> [171.563378] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1]
<7> [171.563975] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [171.564411] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [171.564546] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [171.564679] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [171.564825] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 60 Hz
<7> [171.564828] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [171.564830] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor
<7> [171.564832] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0
<7> [171.564842] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: yes
<7> [171.564983] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [171.565118] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [171.565860] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes:
<7> [171.565863] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2400": 60 596200 3840 3888 3920 4000 2400 2403 2408 2484 0x48 0xa
<7> [171.565938] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:516:DP-1] EDID override reset
<7> [171.565950] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1]
<7> [171.565953] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:516:DP-1]
<7> [171.570187] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] disconnected
<7> [171.570290] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:528:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [171.570294] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [171.570297] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [171.574502] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<7> [171.574522] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [171.574525] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [171.578710] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<7> [171.578774] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:528:HDMI-A-1] EDID override reset
<7> [171.578785] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [171.578788] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [171.582988] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<7> [171.583053] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:534:DP-2] EDID override reset
<7> [171.583064] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2]
<7> [171.583067] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:534:DP-2]
<7> [171.583327] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected
<7> [171.583386] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:543:DP-3] EDID override reset
<7> [171.583396] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3]
<7> [171.583398] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:543:DP-3]
<7> [171.583642] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected
<7> [171.583698] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:552:DP-4] EDID override reset
<7> [171.583708] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4]
<7> [171.583711] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:552:DP-4]
<7> [171.583951] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4] disconnected
<7> [171.584021] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:561:DP-5] EDID override reset
<7> [171.584032] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:561:DP-5]
<7> [171.584035] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:561:DP-5]
<7> [171.584259] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:561:DP-5] disconnected
<6> [171.584648] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [171.585150] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [171.628527] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [171.628539] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [171.628648] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1]
<7> [171.628660] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1]
<7> [171.629818] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [171.630564] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [171.630886] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [171.631243] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [171.631430] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 60 Hz
<7> [171.631435] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [171.631437] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor
<7> [171.631440] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0
<7> [171.631455] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: yes
<7> [171.631619] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [171.631789] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [171.632677] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes:
<7> [171.632682] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2400": 60 596200 3840 3888 3920 4000 2400 2403 2408 2484 0x48 0xa
<7> [171.632688] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1]
<7> [171.632692] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:516:DP-1]
<7> [171.636951] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] disconnected
<7> [171.636956] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [171.636959] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [171.641170] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<7> [171.641174] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2]
<7> [171.641176] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:534:DP-2]
<7> [171.641438] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected
<7> [171.641441] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3]
<7> [171.641443] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:543:DP-3]
<7> [171.641684] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected
<7> [171.641687] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4]
<7> [171.641689] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:552:DP-4]
<7> [171.641930] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4] disconnected
<7> [171.641933] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:561:DP-5]
<7> [171.641936] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:561:DP-5]
<7> [171.642195] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:561:DP-5] disconnected
<7> [171.642198] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] enabled? yes
<7> [171.642202] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:516:DP-1] enabled? no
<7> [171.642204] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:528:HDMI-A-1] enabled? no
<7> [171.642206] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:DP-2] enabled? no
<7> [171.642208] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:DP-3] enabled? no
<7> [171.642210] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:552:DP-4] enabled? no
<7> [171.642213] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:561:DP-5] enabled? no
<7> [171.642236] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [171.642251] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] found preferred mode: 3840x2400
<7> [171.642253] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3840x2400 config
<7> [171.642276] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 3840x2400 set (0,0)
<7> [171.645061] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [171.661740] Console: switching to colour frame buffer device 240x75
Created at 2026-02-24 00:57:47