Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.02 seconds
Igt-Version 
IGT-Version: 2.3-g30ecfbf68 (x86_64) (Linux: 6.19.0-CI_DRM_18003-gfc9512d31fa2+ x86_64)
Out 
Using IGT_SRANDOM=1771419198 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.022s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.022s)
Dmesg
<6> [248.813065] Console: switching to colour dummy device 80x25
<6> [248.814088] [IGT] kms_force_connector_basic: executing
<7> [248.981102] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [248.982010] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [248.982514] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [248.983353] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:76:VGA-1] force updated from 0 to 0 or reprobing
<7> [248.983366] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [248.983376] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [248.983725] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [248.984011] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [248.984435] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [248.984725] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [248.985147] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [248.985405] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [248.985413] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [248.985807] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [248.987117] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [248.987126] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [248.987383] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [248.987692] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<7> [248.987779] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [248.987788] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [248.988059] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [248.988319] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [248.988782] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [248.989042] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [248.989452] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [248.989737] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [248.989746] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [248.990032] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [248.991335] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [248.991343] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [248.991625] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [248.991906] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<7> [248.992005] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [248.992012] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [248.992278] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [248.992537] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [248.993021] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [248.993279] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [248.993684] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [248.993944] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [248.993951] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [248.994209] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [248.995512] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [248.995520] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [248.995813] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [248.996106] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<6> [248.996966] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [248.997470] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:76:VGA-1] force updated from 0 to 2 or reprobing
<7> [248.997483] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [248.997492] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] status updated from disconnected to connected
<7> [248.997521] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [248.997646] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [248.998213] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [248.998516] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [248.998970] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [248.999239] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [248.999257] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [248.999518] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [249.000888] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [249.000903] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [249.001253] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] probed modes:
<7> [249.001261] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [249.001268] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [249.001275] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [249.001281] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [249.001287] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [249.001359] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [249.001566] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [249.001935] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [249.002352] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [249.002648] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [249.002668] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [249.003000] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [249.004370] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [249.004388] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [249.004825] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] probed modes:
<7> [249.004838] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [249.004848] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [249.004854] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [249.004860] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [249.004866] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [249.005179] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:76:VGA-1] EDID override set
<7> [249.005212] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [249.005269] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:76:VGA-1] ELD monitor IGT
<7> [249.005275] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:76:VGA-1] ELD size 24, SAD count 0
<7> [249.005450] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [249.005462] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [249.005472] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] probed modes:
<7> [249.005477] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [249.005484] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [249.005490] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [249.005495] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [249.005501] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [249.005507] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [249.005804] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:76:VGA-1] EDID override set
<7> [249.005866] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [249.005924] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:76:VGA-1] ELD monitor IGT
<7> [249.005930] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:76:VGA-1] ELD size 24, SAD count 0
<7> [249.005935] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:76:VGA-1] EDID changed, epoch counter 56
<7> [249.006098] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [249.006109] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] probed modes:
<7> [249.006115] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [249.006121] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [249.006127] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [249.006133] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [249.006138] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [249.006302] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:76:VGA-1] EDID override reset
<7> [249.006337] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [249.006534] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [249.006938] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [249.007359] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [249.007651] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [249.007673] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [249.007994] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [249.009374] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [249.009393] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [249.009817] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [249.009834] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [249.009845] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] probed modes:
<7> [249.009853] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [249.009859] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [249.009865] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [249.009870] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [249.009876] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [249.010179] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:76:VGA-1] force updated from 2 to 0 or reprobing
<7> [249.010188] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [249.010195] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [249.010476] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [249.010784] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [249.011245] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [249.011501] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [249.012067] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [249.012327] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [249.012335] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [249.012622] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [249.013992] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [249.014001] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [249.014260] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [249.014521] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] status updated from connected to disconnected
<7> [249.014536] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<7> [249.014548] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [249.014719] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [249.014742] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:76:VGA-1] EDID changed, epoch counter 58
<7> [249.014877] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [249.014889] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [249.015274] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [249.015538] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [249.016036] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [249.016304] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [249.016722] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [249.017026] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [249.017034] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [249.017294] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [249.018643] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [249.018653] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [249.018931] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [249.019212] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<6> [249.020162] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [249.020830] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [249.021553] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:72:LVDS-1] force updated from 0 to 0 or reprobing
<7> [249.021564] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1]
<7> [249.021682] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD monitor
<7> [249.021693] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD size 20, SAD count 0
<7> [249.021824] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1] probed modes:
<7> [249.021833] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [249.021881] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1]
<7> [249.021891] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD monitor
<7> [249.021896] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD size 20, SAD count 0
<7> [249.021967] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1] probed modes:
<7> [249.021973] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [249.022146] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:72:LVDS-1] EDID override reset
<7> [249.022175] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1]
<7> [249.022183] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD monitor
<7> [249.022188] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD size 20, SAD count 0
<7> [249.022255] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1] probed modes:
<7> [249.022261] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [249.022518] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:76:VGA-1] force updated from 0 to 0 or reprobing
<7> [249.022526] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [249.022533] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [249.022871] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [249.023234] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [249.023685] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [249.023950] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [249.024400] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [249.024791] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [249.024800] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [249.025066] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [249.026482] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [249.026493] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [249.026825] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [249.027158] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<7> [249.027245] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [249.027254] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [249.027523] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [249.027838] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [249.028305] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [249.028560] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [249.028996] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [249.029255] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [249.029262] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [249.029520] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [249.030879] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [249.030887] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [249.031145] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [249.031405] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<7> [249.031647] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:76:VGA-1] EDID override reset
<7> [249.031695] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [249.031706] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [249.032011] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [249.032270] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [249.032673] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [249.032931] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [249.033335] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [249.033617] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [249.033626] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [249.033906] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [249.035194] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [249.035201] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [249.035457] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [249.035779] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<7> [249.036093] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:79:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [249.036103] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1]
<7> [249.036110] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:79:HDMI-A-1]
<7> [249.088104] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [249.103679] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [249.103701] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [249.103974] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [249.119637] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [249.119648] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [249.119916] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1] disconnected
<7> [249.119997] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1]
<7> [249.120005] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:79:HDMI-A-1]
<7> [249.171641] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [249.187664] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [249.187676] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [249.187959] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [249.203712] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [249.203744] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [249.204107] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1] disconnected
<7> [249.204380] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:79:HDMI-A-1] EDID override reset
<7> [249.204420] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1]
<7> [249.204430] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:79:HDMI-A-1]
<7> [249.256191] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [249.272640] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [249.272654] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [249.272965] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [249.288630] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [249.288644] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [249.288937] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1] disconnected
<7> [249.289185] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:87:DP-1] EDID override reset
<7> [249.289218] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:87:DP-1]
<7> [249.289225] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:87:DP-1]
<7> [249.293527] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:87:DP-1] disconnected
<7> [249.294254] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:92:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [249.294276] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2]
<7> [249.294293] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:92:HDMI-A-2]
<7> [249.295254] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [249.295555] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [249.295998] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [249.296263] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [249.296271] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [249.296525] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [249.297927] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [249.297936] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [249.298207] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2] disconnected
<7> [249.298279] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2]
<7> [249.298287] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:92:HDMI-A-2]
<7> [249.298692] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [249.298954] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [249.299365] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [249.299673] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [249.299683] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [249.299957] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [249.301240] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [249.301247] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [249.301507] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2] disconnected
<7> [249.301766] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:92:HDMI-A-2] EDID override reset
<7> [249.301798] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2]
<7> [249.301806] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:92:HDMI-A-2]
<7> [249.302256] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [249.302695] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [249.303235] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [249.303640] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [249.303650] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [249.304042] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [249.305725] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [249.305735] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [249.306117] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2] disconnected
<7> [249.306638] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:96:HDMI-A-3] force updated from 0 to 0 or reprobing
<7> [249.306651] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3]
<7> [249.306664] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:96:HDMI-A-3]
<7> [249.307269] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [249.307542] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [249.308045] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [249.308305] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [249.308313] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [249.308587] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [249.309964] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [249.309973] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [249.310238] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3] disconnected
<7> [249.310312] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3]
<7> [249.310320] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:96:HDMI-A-3]
<7> [249.310788] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [249.311047] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [249.311456] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [249.311746] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [249.311756] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [249.312051] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [249.313338] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [249.313346] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [249.313653] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3] disconnected
<7> [249.313902] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:96:HDMI-A-3] EDID override reset
<7> [249.313935] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3]
<7> [249.313942] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:96:HDMI-A-3]
<7> [249.314369] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [249.314657] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [249.315126] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [249.315383] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [249.315389] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [249.315674] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [249.317020] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [249.317028] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [249.317289] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3] disconnected
<7> [249.317495] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:100:DP-2] EDID override reset
<7> [249.317527] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:100:DP-2]
<7> [249.317534] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:100:DP-2]
<7> [249.321862] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:100:DP-2] disconnected
<7> [249.322069] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:104:DP-3] EDID override reset
<7> [249.322099] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:DP-3]
<7> [249.322107] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:104:DP-3]
<7> [249.326405] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:DP-3] disconnected
<6> [249.328470] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [249.329395] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [249.335666] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [249.335681] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [249.335773] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1]
<7> [249.335789] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD monitor
<7> [249.335795] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD size 20, SAD count 0
<7> [249.335880] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1] probed modes:
<7> [249.335887] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [249.335894] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [249.335900] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [249.336187] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [249.336433] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [249.336998] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [249.337263] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [249.337656] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [249.337917] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [249.337925] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [249.338185] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [249.339503] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [249.339511] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [249.339868] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [249.340229] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<7> [249.340243] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1]
<7> [249.340250] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:79:HDMI-A-1]
<7> [249.392197] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [249.408636] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [249.408649] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [249.408915] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [249.424782] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [249.424815] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [249.425184] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1] disconnected
<7> [249.425197] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:87:DP-1]
<7> [249.425206] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:87:DP-1]
<7> [249.429517] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:87:DP-1] disconnected
<7> [249.429541] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2]
<7> [249.429553] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:92:HDMI-A-2]
<7> [249.430249] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [249.430663] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [249.431263] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [249.431605] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [249.431624] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [249.431928] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [249.433357] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [249.433366] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [249.433659] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2] disconnected
<7> [249.433674] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3]
<7> [249.433685] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:96:HDMI-A-3]
<7> [249.434123] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [249.434378] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [249.434834] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [249.435093] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [249.435100] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [249.435353] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [249.436708] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [249.436716] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [249.436982] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3] disconnected
<7> [249.436991] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:100:DP-2]
<7> [249.436999] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:100:DP-2]
<7> [249.441281] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:100:DP-2] disconnected
<7> [249.441301] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:DP-3]
<7> [249.441313] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:104:DP-3]
<7> [249.445896] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:DP-3] disconnected
<7> [249.445926] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:72:LVDS-1] enabled? yes
<7> [249.445942] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:76:VGA-1] enabled? no
<7> [249.445955] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:79:HDMI-A-1] enabled? no
<7> [249.445968] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:87:DP-1] enabled? no
<7> [249.445981] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:92:HDMI-A-2] enabled? no
<7> [249.445993] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:96:HDMI-A-3] enabled? no
<7> [249.446005] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:100:DP-2] enabled? no
<7> [249.446017] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:104:DP-3] enabled? no
<7> [249.446096] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [249.446147] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:72:LVDS-1] found preferred mode: 1366x768
<7> [249.446161] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1366x768 config
<7> [249.446220] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:52:pipe A] desired mode 1366x768 set (0,0)
<7> [249.451994] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [249.469274] Console: switching to colour frame buffer device 170x48
Created at 2026-02-18 15:44:32