igt@i915_pm_rpm@module-reload on fi-skl-6600u@IGT

Detail	Value
Duration	12.75 seconds
Igt-Version	IGT-Version: 2.3-ga4e057edb (x86_64) (Linux: 6.19.0-CI_DRM_17994-g483cf2d774a0+ x86_64)
Out	Using IGT_SRANDOM=1771253921 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff88814818d820 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] hsw_get_pipe_config+0x1b9/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x740 [i915] intel_atomic_commit_tail+0x12e0/0x1d70 [i915] intel_atomic_commit+0x2e8/0x330 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x407/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 __x64_sys_ioctl+0xa5/0x100 Starting subtest: module-reload Reloading i915 with disable_display=1 mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 2 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff888147805820 has 1/2 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get+0x1a/0x30 [i915] intel_display_rpm_get+0x1f/0x30 [i915] intel_display_power_get+0x22/0x70 [i915] intel_audio_component_get_power+0x2f/0x180 [i915] snd_hdac_display_power+0x8a/0x1c0 [snd_hda_core] azx_probe_continue+0x24f/0x9f0 [snd_hda_intel] azx_probe_work+0x15/0x20 [snd_hda_intel] process_one_work+0x22e/0x6b0 worker_thread+0x1e8/0x3d0 kthread+0x11f/0x250 ret_from_fork+0x344/0x3a0 ret_from_fork_asm+0x1a/0x30 ref_tracker: intel_runtime_pm@ffff888147805820 has 1/2 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get+0x1a/0x30 [i915] intel_display_rpm_get+0x1f/0x30 [i915] intel_display_power_get+0x22/0x70 [i915] intel_pps_vdd_on_unlocked+0xbd/0x360 [i915] intel_dp_aux_xfer+0x12b/0x960 [i915] intel_dp_aux_transfer+0xd4/0x330 [i915] drm_dp_dpcd_access+0xc3/0x160 [drm_display_helper] drm_dp_dpcd_read+0x87/0x160 [drm_display_helper] intel_alpm_init+0x39/0x90 [i915] intel_dp_init_connector+0x9c4/0x14e0 [i915] intel_ddi_init+0xd03/0x1220 [i915] intel_bios_for_each_encoder+0x39/0x60 [i915] intel_setup_outputs+0x1f4/0xc20 [i915] intel_display_driver_probe_nogem+0x110/0x1e0 [i915] Reloading i915 with mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff888102571820 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] hsw_get_pipe_config+0x1b9/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x740 [i915] intel_atomic_commit_tail+0x12e0/0x1d70 [i915] intel_atomic_commit+0x2e8/0x330 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x407/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 __x64_sys_ioctl+0xa5/0x100 Subtest module-reload: SUCCESS (12.748s)
Err	Starting subtest: module-reload Subtest module-reload: SUCCESS (12.748s)
Dmesg	<6> [295.163164] Console: switching to colour dummy device 80x25 <6> [295.164366] [IGT] i915_pm_rpm: executing <7> [295.168593] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [295.169441] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [295.169454] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [295.170203] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [295.170484] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [295.170708] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [295.171009] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [295.171021] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [295.171029] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [295.171065] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no <7> [295.171373] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [295.171600] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [295.173298] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes: <7> [295.173309] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [295.173318] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [295.173459] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [295.173469] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [295.177831] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [295.177944] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [295.177956] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [295.178720] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [295.179044] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [295.179468] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [295.179738] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [295.179754] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [295.179987] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [295.183039] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [295.183048] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [295.183323] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [295.183414] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [295.183422] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [295.187796] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [295.187883] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [295.187911] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [295.188402] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [295.188623] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [295.189024] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [295.189276] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [295.189283] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [295.189496] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [295.192513] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [295.192522] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [295.192819] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [295.199609] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [295.199621] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [295.203993] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [295.204634] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [295.204643] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [295.205240] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [295.205466] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [295.205871] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [295.206190] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [295.206201] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [295.206450] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [295.209459] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [295.209467] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [295.209727] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [295.210620] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [295.210633] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [295.215078] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [295.215680] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [295.215690] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [295.216207] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [295.216560] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [295.217087] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [295.217455] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [295.217465] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [295.217755] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [295.220812] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [295.220821] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [295.221122] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [295.221673] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [295.221683] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [295.222020] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [295.222267] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [295.222479] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [295.222728] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [295.222736] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [295.222741] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [295.222766] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no <7> [295.223011] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [295.223282] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [295.224276] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes: <7> [295.224287] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [295.224298] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [295.224339] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [295.224350] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [295.228807] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [295.228840] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [295.228848] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [295.229366] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [295.229722] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [295.230752] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [295.231062] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [295.231079] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [295.231286] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [295.234390] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [295.234402] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [295.234808] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [295.234854] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [295.234865] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [295.239315] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [295.239345] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [295.239353] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [295.239821] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [295.240077] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [295.240610] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [295.240984] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [295.240993] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [295.241326] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [295.244446] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [295.244466] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [295.244696] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [295.245351] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:144] <7> [295.457068] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [296.289925] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:58:pipe A] <7> [296.290509] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [296.291607] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [296.291951] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [296.292213] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [296.292473] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [296.292735] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [296.293014] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [296.293316] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [296.293576] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [296.293852] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [296.294161] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [296.294421] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [296.294685] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [296.294982] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [296.295272] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [296.295521] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [296.295771] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [296.296039] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [296.296342] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [296.296600] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [296.296856] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [296.297147] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [296.297388] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [296.297645] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [296.297929] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [296.298195] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [296.298435] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [296.298755] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [296.299021] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [296.299284] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [296.299582] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [296.299864] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [296.300125] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [296.300377] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [296.300749] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [296.301145] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [296.301522] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [296.301909] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [296.302285] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [296.302666] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset <7> [296.303061] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0 <7> [296.303462] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [296.303721] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [296.303980] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [296.304255] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [296.304488] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [296.304722] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [296.304977] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [296.305311] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [296.305607] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz <7> [296.305934] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [296.306312] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [296.306685] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [296.307078] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset] <7> [296.307453] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no <7> [296.307827] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [296.308215] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no <7> [296.308788] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [296.310343] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [296.512145] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0 <7> [296.514354] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [296.519554] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off <7> [296.520037] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [296.520566] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time <7> [296.521621] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [296.521577] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short <7> [296.573105] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [296.573769] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [296.574238] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long <7> [296.575253] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [296.575410] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [296.579782] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A] <7> [296.579963] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [296.581378] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [296.583361] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [296.584558] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [296.587710] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A] <7> [296.588898] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B] <7> [296.589950] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A] <7> [296.590928] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B] <7> [296.591997] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C] <7> [296.593128] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C] <7> [296.594411] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A] <7> [296.595415] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B] <7> [296.596524] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C] <7> [296.597603] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1] <7> [296.599633] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [296.602408] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:83:pipe B] <7> [296.603524] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:108:pipe C] <7> [296.704459] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [296.706279] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [296.707389] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [296.708812] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [296.712044] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [296.735066] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [296.815664] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:110:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [296.816919] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:109:DDI A/PHY A][CRTC:58:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [296.818008] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000 <7> [296.819114] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [296.820338] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:109:DDI A/PHY A] [CRTC:58:pipe A] <7> [296.821449] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [296.822683] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [296.823731] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [296.825610] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [296.826963] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [296.828451] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [296.829532] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [296.830730] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [296.831794] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [296.833049] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [296.834138] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [296.835448] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [296.836760] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [296.838378] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [296.839987] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [296.841204] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [296.842688] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [296.844204] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [296.845788] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [296.847323] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [296.848860] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [296.850421] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [296.851543] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [296.852913] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [296.854422] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [296.855894] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [296.857384] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [296.858894] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [296.860173] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [296.861458] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [296.862546] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [296.863856] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [296.864732] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [296.865721] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [296.866967] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [296.867857] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [296.868915] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [296.870194] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [296.871387] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [296.872397] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset <7> [296.873941] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [296.875000] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [296.876024] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [296.877033] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [296.877877] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [296.879189] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [296.880289] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [296.882003] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [296.883614] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [296.884950] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [296.886246] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [296.887560] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [296.888889] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:58:pipe A] allocated DPLL 0 <7> [296.889897] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:58:pipe A] reserving DPLL 0 <7> [296.890990] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: yes [modeset] <7> [296.891850] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [296.892881] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [296.893692] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [296.894615] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [296.895642] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [296.896567] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [296.897781] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [296.898712] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [296.899754] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [296.900667] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [296.901726] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [296.902603] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [296.903642] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [296.904529] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [296.905686] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [296.906593] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [296.907613] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [296.908501] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [296.909412] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [296.910280] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [296.911226] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [296.912090] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [296.912671] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [296.913252] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [296.913869] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [296.914513] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [296.915208] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [296.915896] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [296.916445] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [296.917034] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [296.917697] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [296.918385] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [296.919097] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [296.919641] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [296.920231] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [296.921000] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [296.921407] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [296.921835] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [296.922335] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [296.922742] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [296.923197] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [296.923689] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [296.924145] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [296.924652] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:111] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [296.925108] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [296.925696] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [296.926175] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [296.926641] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no <7> [296.938922] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [296.948114] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [296.948383] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [296.948841] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [296.949520] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [296.950216] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [296.950993] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A] <7> [296.951260] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B] <7> [296.951505] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A] <7> [296.951738] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B] <7> [296.952007] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C] <7> [296.952257] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C] <7> [296.952488] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A] <7> [296.952718] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B] <7> [296.952988] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C] <7> [296.953404] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:58:pipe A] <7> [296.953650] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [296.954125] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power on <7> [296.954536] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (121 ms remaining) <7> [297.080269] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [297.089903] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [297.090345] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power on <7> [297.090771] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003 <7> [297.140255] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [297.141401] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long <7> [297.142419] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [297.143537] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [297.296042] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [297.297509] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [297.299069] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [297.302492] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on <7> [297.304242] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b <7> [297.313191] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [297.314450] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [297.318353] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [297.319998] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [297.321475] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [297.325846] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Clock recovery OK <7> [297.327302] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [297.328902] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [297.333444] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [297.334534] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [297.335830] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [297.340342] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [297.341833] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [297.344354] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [297.346714] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [297.347893] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [297.349490] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 37 <7> [297.362654] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [297.368410] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1] <7> [297.369747] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [297.374696] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [297.375918] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [297.381015] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [297.383402] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <6> [297.384380] [IGT] i915_pm_rpm: starting subtest module-reload <7> [297.384663] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [297.386197] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [297.387719] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [297.387763] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [297.389942] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [297.396919] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [297.396968] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [297.399154] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [297.405722] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [297.407739] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [297.409240] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [297.411577] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [297.413127] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [297.413171] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [297.414775] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [297.419818] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [297.419848] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [297.527348] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [297.528166] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [297.540967] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [297.566407] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [297.566765] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [297.578918] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [297.618106] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [297.619480] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [297.629191] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [297.629618] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [297.630425] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [297.630827] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [297.631202] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [297.631566] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [297.633822] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [297.634227] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [297.634611] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [297.635586] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [297.722485] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [297.723189] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [297.723459] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [297.723724] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [297.725177] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:111] is removed <7> [297.725316] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [297.725736] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [297.726222] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [297.726648] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [297.727086] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [297.727728] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [297.746071] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [297.746888] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [297.747228] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [297.747528] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [297.747943] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [297.748243] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [297.748542] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [297.748872] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [297.749203] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [297.749497] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [297.749838] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [297.750171] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [297.750466] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [297.750761] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [297.751207] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [297.751579] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [297.751962] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [297.752294] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [297.752590] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [297.753060] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [297.753431] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [297.753729] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [297.754064] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [297.754433] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [297.754850] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [297.755196] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [297.755496] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [297.755828] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [297.756148] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [297.756443] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [297.756738] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [297.757062] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [297.757380] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [297.757676] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [297.758008] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [297.758451] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [297.758798] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [297.759165] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [297.759463] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [297.759760] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [297.760119] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset <7> [297.760435] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0 <7> [297.760902] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [297.761345] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [297.762991] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [297.763423] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [297.763863] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [297.764258] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [297.764661] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset] <7> [297.765088] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no <7> [297.765486] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [297.765902] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no <7> [297.766704] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [297.976082] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0 <7> [297.978387] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [298.001114] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off <7> [298.001564] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [298.002888] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time <7> [298.003366] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short <7> [298.004729] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [298.056133] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [298.055991] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [298.057489] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long <7> [298.058905] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [298.061557] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [298.063329] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [298.064861] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A] <7> [298.067349] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [298.068627] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [298.072342] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A] <7> [298.074388] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B] <7> [298.076176] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A] <7> [298.077916] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B] <7> [298.079265] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C] <7> [298.080574] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C] <7> [298.081736] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A] <7> [298.083307] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B] <7> [298.085061] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C] <7> [298.086844] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1] <7> [298.090320] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [298.164578] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [298.210456] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:110:eDP-1] removing connector from sysfs <7> [298.245716] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:118:DP-1] removing connector from sysfs <7> [298.247889] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:127:HDMI-A-1] removing connector from sysfs <7> [298.253762] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:133:DP-2] removing connector from sysfs <7> [298.261231] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:139:HDMI-A-2] removing connector from sysfs <7> [298.291041] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (267 ms remaining) <7> [298.560343] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [298.591395] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [299.159714] [IGT] Reloading i915 w/o display <5> [300.002169] Setting dangerous option force_probe - tainting kernel <6> [300.015232] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0 <7> [300.017295] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K <7> [300.017706] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [300.018041] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH <7> [300.018435] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [300.018906] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [300.019501] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [300.019860] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [300.020889] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [300.021130] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [300.021337] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [300.021543] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [300.021553] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [300.022217] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [300.022254] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [300.022505] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [300.022766] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7716 MiB [mem 0x00000000-0x1e24e0fff], io: n/a <7> [300.023065] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a <7> [300.023968] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018 <7> [300.024443] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [300.024854] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [300.025164] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [300.025419] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [300.033830] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [300.034115] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [300.034370] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [300.034625] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [300.034929] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [300.035351] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [300.035774] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no <7> [300.036177] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [300.036577] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [300.037009] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no <7> [300.037424] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes <7> [300.037849] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no <7> [300.038266] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3 <7> [300.038678] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [300.039075] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0 <7> [300.039473] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7> [300.040713] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [300.041141] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203 <7> [300.041548] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [300.041980] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [300.042388] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [300.042805] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [300.043212] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 850) <7> [300.043617] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [300.044040] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [300.044448] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [300.044866] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [300.045272] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136) <7> [300.045687] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [300.046085] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [300.046482] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [300.046909] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [300.047315] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [300.047736] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [300.048133] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [300.048531] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [300.048938] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [300.049334] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [300.049742] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [300.050141] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [300.050553] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [300.050994] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [300.051504] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [300.051955] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [300.052364] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [300.052776] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [300.053170] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [300.053567] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [300.054101] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [300.054505] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [300.054923] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [300.055342] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [300.055848] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [300.056256] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [300.056674] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [300.057078] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [300.058329] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <7> [300.059810] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [300.060245] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [300.060668] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [300.061090] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [300.061367] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <6> [300.061931] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [300.063113] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [300.063609] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [300.063914] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7> [300.064230] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec) <7> [300.064596] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec) <7> [300.065005] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec) <7> [300.065397] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec) <7> [300.065789] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec) <7> [300.066177] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec) <7> [300.066526] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec) <7> [300.066863] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec) <7> [300.067242] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec) <7> [300.067635] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec) <7> [300.068051] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec) <7> [300.068439] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec) <7> [300.068832] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec) <7> [300.069198] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec) <7> [300.069471] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec) <7> [300.074529] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available. <7> [300.080613] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [300.081113] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:109:DDI A/PHY A] Using AUX CH A (VBT) <7> [300.081568] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:109:DDI A/PHY A] <7> [300.089443] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [300.089777] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [300.090039] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [300.090300] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [300.090574] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [300.090865] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [300.091247] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP <7> [300.091642] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [300.092070] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0 <7> [300.092477] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0 <7> [300.093047] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:109:DDI A/PHY A] initial power sequencer: PPS 0 <7> [300.093464] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [300.093905] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [300.094206] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [300.094581] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [300.094993] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [300.095415] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [300.096102] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on <7> [300.096522] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [300.096975] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [300.106843] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [300.107149] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [300.107395] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [300.313630] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [300.316330] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [300.318084] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00 <7> [300.322932] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [300.340866] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [300.340925] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [300.340960] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [300.341427] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [300.342802] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [300.344328] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:110:eDP-1] DRRS type: static <7> [300.346318] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:110:eDP-1] Using native PCH PWM for backlight control <7> [300.347876] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:110:eDP-1] backlight initialized, disabled, brightness 0/937 <7> [300.350083] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [300.351829] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [300.353106] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [300.354618] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [300.355913] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [300.357491] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [300.360313] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:117:DDI B/PHY B] Using AUX CH B (VBT) <7> [300.361910] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:117:DDI B/PHY B] <7> [300.366832] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [300.368364] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:117:DDI B/PHY B] <7> [300.369697] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:117:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [300.372831] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:132:DDI C/PHY C] Using AUX CH C (VBT) <7> [300.374463] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:132:DDI C/PHY C] <7> [300.378243] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [300.379789] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:132:DDI C/PHY C] <7> [300.381115] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:132:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [300.384389] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled <6> [300.385772] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem <7> [300.386987] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] hw state readout: disabled <7> [300.389462] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] hw state readout: disabled <7> [300.391695] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] hw state readout: disabled <7> [300.393267] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] hw state readout: disabled, pipe A <7> [300.395051] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A <7> [300.396823] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] hw state readout: disabled, pipe A <7> [300.398753] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] hw state readout: disabled, pipe B <7> [300.400911] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] hw state readout: disabled, pipe B <7> [300.403193] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] hw state readout: disabled, pipe B <7> [300.405417] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] hw state readout: disabled, pipe C <7> [300.407612] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] hw state readout: disabled, pipe C <7> [300.409439] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] hw state readout: disabled, pipe C <7> [300.411397] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DDI A/PHY A] hw state readout: disabled, pipe A <7> [300.413731] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DDI B/PHY B] hw state readout: disabled, pipe A <7> [300.415755] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST A] hw state readout: disabled, pipe A <7> [300.417774] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST B] hw state readout: disabled, pipe B <7> [300.419478] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST C] hw state readout: disabled, pipe C <7> [300.421317] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:132:DDI C/PHY C] hw state readout: disabled, pipe A <7> [300.423337] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST A] hw state readout: disabled, pipe A <7> [300.424803] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST B] hw state readout: disabled, pipe B <7> [300.426001] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST C] hw state readout: disabled, pipe C <7> [300.427233] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [300.428244] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [300.429608] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [300.430938] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [300.432551] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:110:eDP-1] hw state readout: disabled <7> [300.433572] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:118:DP-1] hw state readout: disabled <7> [300.434331] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:127:HDMI-A-1] hw state readout: disabled <7> [300.435049] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:133:DP-2] hw state readout: disabled <7> [300.435773] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:139:HDMI-A-2] hw state readout: disabled <7> [300.436431] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] min_cdclk 0 kHz <7> [300.437035] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] min_cdclk 0 kHz <7> [300.437713] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] min_cdclk 0 kHz <7> [300.438260] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] min_cdclk 0 kHz <7> [300.438985] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] min_cdclk 0 kHz <7> [300.439608] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] min_cdclk 0 kHz <7> [300.440215] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] min_cdclk 0 kHz <7> [300.440883] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] min_cdclk 0 kHz <7> [300.441430] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] min_cdclk 0 kHz <7> [300.442011] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] min_cdclk 0 kHz <7> [300.442513] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] min_cdclk 0 kHz <7> [300.443014] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] min_cdclk 0 kHz <7> [300.443544] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:58:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [300.444052] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:83:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [300.444546] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:108:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [300.445376] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [setup_hw_state] <7> [300.445843] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [setup_hw_state] <7> [300.446264] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [setup_hw_state] <7> [300.446712] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [300.447344] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [300.447827] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [300.448258] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [300.448710] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7> [300.451923] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [300.452300] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [300.452650] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0 <7> [300.475967] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [300.476217] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [300.476415] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [300.476610] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [300.476968] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 0: start 0x8 <7> [300.477252] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 1: start 0x108 <7> [300.477508] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 2: start 0x208 <7> [300.477851] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 3: start 0x308 <7> [300.478194] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 4: start 0x3c8 <7> [300.478450] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 0: start 0x8 <7> [300.478751] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 1: start 0x108 <7> [300.479060] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 2: start 0x208 <7> [300.479316] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 3: start 0x308 <7> [300.479676] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 4: start 0x3c8 <7> [300.480054] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 0: start 0x8 <7> [300.480446] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 1: start 0x108 <7> [300.480845] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 2: start 0x208 <7> [300.481222] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 3: start 0x308 <7> [300.481479] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 4: start 0x3c8 <7> [300.482093] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [fastset] <7> [300.482490] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [fastset] <7> [300.482894] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [fastset] <7> [300.483551] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [300.484292] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:83:pipe B] <7> [300.484780] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:108:pipe C] <7> [300.485395] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [300.491857] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:110:eDP-1] adding connector to sysfs <7> [300.494170] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:110:eDP-1] backlight device intel_backlight registered <7> [300.494746] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:110:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [300.495444] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [300.499007] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:110:eDP-1] generating connector hotplug event <7> [300.499149] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:118:DP-1] adding connector to sysfs <7> [300.500244] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [300.503217] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:118:DP-1] generating connector hotplug event <7> [300.503326] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:127:HDMI-A-1] adding connector to sysfs <7> [300.504360] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:127:HDMI-A-1] generating connector hotplug event <7> [300.504506] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:133:DP-2] adding connector to sysfs <7> [300.505963] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [300.509786] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:133:DP-2] generating connector hotplug event <7> [300.509912] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:139:HDMI-A-2] adding connector to sysfs <7> [300.510806] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:139:HDMI-A-2] generating connector hotplug event <6> [300.510940] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7> [300.516600] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [300.549806] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [300.560187] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input35 <7> [300.563676] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [300.569540] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [300.570023] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:118:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [300.570455] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [300.570912] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:127:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [300.571331] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [300.571748] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:133:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [300.573651] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [300.573699] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:58:pipe A] not active, skipping <7> [300.574122] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:139:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [300.574134] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:83:pipe B] not active, skipping <7> [300.574593] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [300.574573] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:108:pipe C] not active, skipping <7> [300.574958] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config <7> [300.576167] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [300.579340] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [300.579494] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [300.579510] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [300.579972] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] status updated from unknown to disconnected <7> [300.579994] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] disconnected <7> [300.580016] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [300.580358] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:110:eDP-1] EDID changed, epoch counter 2 <7> [300.580389] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [300.580401] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [300.580850] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [300.581413] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [300.581450] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [300.581863] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [300.582113] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [300.582126] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [300.582528] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [300.582570] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [300.582582] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [300.583011] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [300.585808] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [300.585820] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? no <7> [300.585829] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no <7> [300.585838] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no <7> [300.585846] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no <7> [300.585854] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no <7> [300.585912] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [300.585933] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [300.586041] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [300.586057] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [300.589075] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9 <7> [300.589542] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0 <7> [300.589990] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7> [300.590405] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no <7> [300.590852] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no <7> [300.591269] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7> [300.591715] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7> [300.592133] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no <7> [300.592547] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7> [300.592976] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7> [300.593390] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7> [300.593818] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7> [300.594232] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7> [300.594659] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7> [300.595069] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7> [300.595480] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes <7> [300.595928] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7> [300.596343] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7> [300.596793] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7> [300.597205] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7> [300.597653] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no <7> [300.598069] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz <7> [300.598792] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [300.598933] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [300.598949] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [300.599354] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] disconnected <7> [300.599371] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [300.599383] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [300.599800] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [300.599814] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [300.599826] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [300.600220] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [300.600232] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [300.600243] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [300.600663] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [300.600676] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [300.600688] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [300.601078] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [300.601090] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [300.601099] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? no <7> [300.601108] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no <7> [300.601116] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no <7> [300.601124] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no <7> [300.601132] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no <7> [300.601193] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [300.601213] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [300.601313] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [300.601343] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [300.601512] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [300.602573] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7> [300.603055] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [300.603487] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [300.603926] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [300.604347] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [300.604803] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [300.605586] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9 <7> [300.606495] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9 <7> [300.606927] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9 <7> [300.607254] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0 <7> [300.607579] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0 <7> [300.607908] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2 <7> [300.608231] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21 <7> [300.608556] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000 <7> [300.608895] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE <7> [300.609217] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7> [300.609540] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7> [300.609876] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39 <7> [300.610203] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7> [300.610527] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7> [300.610859] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7> [300.611183] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7> [300.611491] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7> [300.611822] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7> [300.612143] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7> [300.612464] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7> [300.612792] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7> [300.613111] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no <7> [300.613436] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no <7> [300.613760] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7> [300.614075] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7> [300.614392] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7> [300.614731] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no <7> [300.615054] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no <7> [300.615375] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7> [300.615708] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7> [300.616028] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes <7> [300.616347] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7> [300.616688] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no <7> [300.617026] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7> [300.617348] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7> [300.617687] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no <7> [300.618004] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no <7> [300.618331] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no <7> [300.618673] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7> [300.618999] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no <7> [300.619325] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7> [300.619668] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7> [300.619994] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7> [300.620316] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7> [300.620654] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no <7> [300.620981] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes <7> [300.621306] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7> [300.621646] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7> [300.621973] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7> [300.622298] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7> [300.622640] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7> [300.622966] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403 <7> [300.623284] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001 <7> [300.623600] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3 <7> [300.623931] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007 <7> [300.624257] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000 <7> [300.624583] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000 <7> [300.624926] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24 <7> [300.625252] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8 <7> [300.625574] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7> [300.625908] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7> [300.626227] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes <6> [300.626547] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [300.626552] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [300.626556] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [300.639503] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6> [300.640375] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7> [300.641093] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [300.641955] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [300.648721] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [300.676350] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [300.676648] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [300.676889] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [300.677117] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [300.677344] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [300.677570] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [300.677926] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [300.678274] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [300.678655] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <6> [300.698237] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36 <6> [300.725244] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input37 <6> [300.730031] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input38 <7> [301.937867] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [302.914878] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD off <7> [302.915788] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [302.916669] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [302.917478] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [302.917844] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [302.917901] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [302.918263] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long <7> [302.918842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [302.919039] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [302.919964] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [302.920113] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [302.926571] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [303.067597] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [303.097701] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [303.105819] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [303.106164] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [303.106426] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [303.106536] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [303.106775] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [303.107298] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [303.107372] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [303.107975] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [303.108097] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [303.108498] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [303.121689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [303.121996] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [303.122241] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [303.122476] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [303.123146] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [303.232641] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [303.233043] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [303.234068] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [303.234735] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [303.237202] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [303.244119] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [303.244388] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [303.244626] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [303.244930] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [303.245266] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [303.245624] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [303.245972] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [303.246313] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [303.246684] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [303.247419] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [303.248192] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [303.248574] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [303.248925] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [303.249679] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [303.342038] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [303.342997] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [303.344569] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [303.346215] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [303.348111] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [303.349535] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [303.350975] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [303.352363] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [303.353872] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [303.412911] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [303.442926] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:110:eDP-1] removing connector from sysfs <7> [303.454468] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:118:DP-1] removing connector from sysfs <7> [303.463052] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:127:HDMI-A-1] removing connector from sysfs <7> [303.478816] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:133:DP-2] removing connector from sysfs <7> [303.489593] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:139:HDMI-A-2] removing connector from sysfs <7> [303.524544] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [303.525100] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [303.537661] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [304.024395] [IGT] Reloading i915 as normal <5> [304.863171] Setting dangerous option force_probe - tainting kernel <6> [304.875382] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0 <7> [304.876954] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K <7> [304.877359] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [304.877673] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH <7> [304.877954] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [304.878258] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [304.878789] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [304.879017] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [304.880107] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [304.880327] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [304.880558] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [304.880781] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [304.880855] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [304.881501] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [304.881540] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [304.881781] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [304.882030] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7716 MiB [mem 0x00000000-0x1e24e0fff], io: n/a <7> [304.882225] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a <7> [304.882966] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018 <7> [304.883461] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [304.883851] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [304.884235] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [304.884624] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [304.892446] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [304.892791] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [304.893039] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [304.893286] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [304.893581] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [304.893910] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [304.894167] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no <7> [304.894439] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [304.894749] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [304.895004] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no <7> [304.895258] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes <7> [304.895613] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no <7> [304.895991] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3 <7> [304.896252] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [304.896532] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0 <7> [304.896914] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7> [304.898566] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [304.898855] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203 <7> [304.899189] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [304.899608] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [304.900003] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [304.900396] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [304.900808] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 850) <7> [304.901124] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [304.901387] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [304.901739] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [304.902140] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [304.902549] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136) <7> [304.902934] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [304.903263] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [304.903552] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [304.903843] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [304.904230] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [304.904635] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [304.905018] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [304.905399] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [304.905785] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [304.906095] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [304.906347] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [304.906622] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [304.907017] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [304.907439] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [304.907938] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [304.908324] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [304.908611] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [304.908903] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [304.909254] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [304.909659] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [304.910162] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [304.910563] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [304.910873] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [304.911141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [304.911483] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [304.911873] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [304.912267] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [304.912678] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [304.913731] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <7> [304.914971] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [304.915258] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [304.915528] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [304.915840] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [304.917616] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [304.918396] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <6> [304.918714] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [304.918892] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [304.919153] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7> [304.919531] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec) <7> [304.919913] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec) <7> [304.920291] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec) <7> [304.920680] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec) <7> [304.921040] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec) <7> [304.921304] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec) <7> [304.921567] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec) <7> [304.921849] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec) <7> [304.922099] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec) <7> [304.922346] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec) <7> [304.922612] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec) <7> [304.922912] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec) <7> [304.923161] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec) <7> [304.923409] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec) <7> [304.923731] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec) <7> [304.928443] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available. <7> [304.932421] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [304.932872] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:109:DDI A/PHY A] Using AUX CH A (VBT) <7> [304.933300] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:109:DDI A/PHY A] <7> [304.941439] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [304.941886] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [304.942282] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [304.942819] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [304.943390] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [304.943788] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [304.944186] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP <7> [304.944703] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [304.945102] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0 <7> [304.945506] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0 <7> [304.946033] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:109:DDI A/PHY A] initial power sequencer: PPS 0 <7> [304.946476] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [304.946851] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [304.947223] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [304.947676] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [304.948054] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [304.948493] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [304.949143] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on <7> [304.949573] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [304.950009] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [304.959605] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [304.959914] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [304.960161] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [305.169323] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [305.170216] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [305.174897] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00 <7> [305.180189] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [305.198039] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [305.198079] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [305.198104] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [305.198707] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [305.200037] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [305.201211] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:110:eDP-1] DRRS type: static <7> [305.202727] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:110:eDP-1] Using native PCH PWM for backlight control <7> [305.203939] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:110:eDP-1] backlight initialized, disabled, brightness 0/937 <7> [305.205629] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [305.206694] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [305.207867] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [305.209041] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [305.210343] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [305.212004] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [305.215250] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:117:DDI B/PHY B] Using AUX CH B (VBT) <7> [305.217111] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:117:DDI B/PHY B] <7> [305.221992] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [305.223870] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:117:DDI B/PHY B] <7> [305.225575] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:117:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [305.228602] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:132:DDI C/PHY C] Using AUX CH C (VBT) <7> [305.229873] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:132:DDI C/PHY C] <7> [305.232773] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [305.234058] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:132:DDI C/PHY C] <7> [305.235176] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:132:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [305.238619] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled <6> [305.239823] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem <7> [305.240958] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] hw state readout: disabled <7> [305.242817] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] hw state readout: disabled <7> [305.244615] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] hw state readout: disabled <7> [305.245988] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] hw state readout: disabled, pipe A <7> [305.247303] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A <7> [305.248864] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] hw state readout: disabled, pipe A <7> [305.250197] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] hw state readout: disabled, pipe B <7> [305.251592] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] hw state readout: disabled, pipe B <7> [305.252915] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] hw state readout: disabled, pipe B <7> [305.254228] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] hw state readout: disabled, pipe C <7> [305.255590] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] hw state readout: disabled, pipe C <7> [305.256933] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] hw state readout: disabled, pipe C <7> [305.258497] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DDI A/PHY A] hw state readout: disabled, pipe A <7> [305.260045] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DDI B/PHY B] hw state readout: disabled, pipe A <7> [305.261219] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST A] hw state readout: disabled, pipe A <7> [305.262564] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST B] hw state readout: disabled, pipe B <7> [305.263796] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST C] hw state readout: disabled, pipe C <7> [305.265273] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:132:DDI C/PHY C] hw state readout: disabled, pipe A <7> [305.266455] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST A] hw state readout: disabled, pipe A <7> [305.267895] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST B] hw state readout: disabled, pipe B <7> [305.269557] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST C] hw state readout: disabled, pipe C <7> [305.271474] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [305.273365] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [305.275264] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [305.276922] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [305.278741] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:110:eDP-1] hw state readout: disabled <7> [305.280837] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:118:DP-1] hw state readout: disabled <7> [305.282925] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:127:HDMI-A-1] hw state readout: disabled <7> [305.284994] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:133:DP-2] hw state readout: disabled <7> [305.286697] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:139:HDMI-A-2] hw state readout: disabled <7> [305.287929] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] min_cdclk 0 kHz <7> [305.289030] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] min_cdclk 0 kHz <7> [305.290097] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] min_cdclk 0 kHz <7> [305.291186] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] min_cdclk 0 kHz <7> [305.292004] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] min_cdclk 0 kHz <7> [305.292845] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] min_cdclk 0 kHz <7> [305.293927] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] min_cdclk 0 kHz <7> [305.295026] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] min_cdclk 0 kHz <7> [305.296095] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] min_cdclk 0 kHz <7> [305.296880] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] min_cdclk 0 kHz <7> [305.297466] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] min_cdclk 0 kHz <7> [305.298015] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] min_cdclk 0 kHz <7> [305.298819] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:58:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [305.299594] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:83:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [305.300349] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:108:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [305.301640] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [setup_hw_state] <7> [305.302315] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [setup_hw_state] <7> [305.302932] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [setup_hw_state] <7> [305.303593] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [305.304208] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [305.304639] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [305.305183] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [305.305630] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7> [305.308812] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [305.309223] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [305.309724] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0 <7> [305.334968] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [305.335222] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [305.335446] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [305.335684] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [305.335885] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 0: start 0x8 <7> [305.336145] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 1: start 0x108 <7> [305.336455] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 2: start 0x208 <7> [305.336761] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 3: start 0x308 <7> [305.337017] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 4: start 0x3c8 <7> [305.337272] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 0: start 0x8 <7> [305.337552] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 1: start 0x108 <7> [305.337861] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 2: start 0x208 <7> [305.338126] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 3: start 0x308 <7> [305.338407] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 4: start 0x3c8 <7> [305.338685] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 0: start 0x8 <7> [305.338940] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 1: start 0x108 <7> [305.339195] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 2: start 0x208 <7> [305.339553] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 3: start 0x308 <7> [305.339809] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 4: start 0x3c8 <7> [305.340278] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [fastset] <7> [305.340559] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [fastset] <7> [305.340856] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [fastset] <7> [305.341314] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [305.341968] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:83:pipe B] <7> [305.342404] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:108:pipe C] <7> [305.343016] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [305.350765] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:110:eDP-1] adding connector to sysfs <7> [305.354010] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:110:eDP-1] backlight device intel_backlight registered <7> [305.354519] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:110:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [305.355553] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [305.359387] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:110:eDP-1] generating connector hotplug event <7> [305.359584] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:118:DP-1] adding connector to sysfs <7> [305.360682] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [305.365134] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:118:DP-1] generating connector hotplug event <7> [305.365287] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:127:HDMI-A-1] adding connector to sysfs <7> [305.366479] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:127:HDMI-A-1] generating connector hotplug event <7> [305.366625] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:133:DP-2] adding connector to sysfs <7> [305.368185] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [305.370595] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:133:DP-2] generating connector hotplug event <7> [305.370722] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:139:HDMI-A-2] adding connector to sysfs <7> [305.371755] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:139:HDMI-A-2] generating connector hotplug event <6> [305.371888] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7> [305.377817] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [305.416605] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [305.430378] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input39 <7> [305.434371] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [305.439161] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [305.439479] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:58:pipe A] not active, skipping <7> [305.439872] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:83:pipe B] not active, skipping <7> [305.440245] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:108:pipe C] not active, skipping <7> [305.440673] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config <7> [305.441322] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [305.443851] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:118:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [305.444307] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [305.444992] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [305.447036] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [305.447566] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [305.448165] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [305.448640] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [305.448652] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [305.449044] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [305.453089] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [305.453103] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [305.453697] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:127:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [305.454122] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [305.459539] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:133:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [305.460008] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [305.460743] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [305.461143] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [305.461760] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [305.462193] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [305.462204] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [305.464406] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [305.467699] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [305.467715] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [305.468190] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:139:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [305.469542] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [305.469557] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [305.469572] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [305.470185] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [305.470619] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [305.470995] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [305.472486] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [305.472502] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [305.472511] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [305.472557] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no <7> [305.473001] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [305.473481] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [305.475400] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] status updated from unknown to connected <7> [305.475650] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [305.476162] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes: <7> [305.476175] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [305.476187] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [305.476201] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [305.476214] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [305.480820] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [305.480840] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [305.480853] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [305.481963] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [305.482423] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [305.483028] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [305.483524] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [305.483537] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [305.483936] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [305.487362] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [305.487376] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [305.487873] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [305.487891] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [305.487904] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [305.492488] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [305.492509] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [305.492522] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [305.493266] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [305.493725] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [305.494316] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [305.495419] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [305.495434] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [305.495863] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [305.499911] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [305.499925] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [305.500506] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [305.500522] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? yes <7> [305.500532] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no <7> [305.500541] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no <7> [305.500550] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no <7> [305.500558] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no <7> [305.500616] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [305.500655] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] found preferred mode: 3200x1800 <7> [305.500665] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [305.500698] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:58:pipe A] desired mode 3200x1800 set (0,0) <7> [305.500833] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [305.500888] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] no BIOS fb, allocating a new one <7> [305.507919] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 3200x1800 fb: 0x00180000 <6> [305.509862] fbcon: i915drmfb (fb0) is primary device <6> [305.511517] Console: switching to colour frame buffer device 200x56 <6> [305.511537] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7> [305.511551] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9 <7> [305.512014] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0 <7> [305.512440] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7> [305.512852] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no <7> [305.513260] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no <7> [305.513698] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7> [305.514104] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7> [305.514533] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no <7> [305.514946] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7> [305.515357] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7> [305.515787] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7> [305.516197] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7> [305.516624] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7> [305.517029] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7> [305.517475] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7> [305.517890] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes <7> [305.518305] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7> [305.518742] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7> [305.519155] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7> [305.519586] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7> [305.520002] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no <7> [305.520429] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz <7> [305.521027] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [305.521046] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [305.521892] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [305.521918] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [305.522698] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [305.523115] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [305.523540] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [305.524606] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [305.524620] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [305.524639] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [305.524704] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no <7> [305.525127] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [305.525553] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [305.528190] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes: <7> [305.528214] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [305.528227] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [305.528241] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [305.528254] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [305.531497] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7> [305.531999] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [305.533435] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [305.533891] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [305.534306] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [305.536080] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [305.536955] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [305.536975] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [305.536988] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [305.537997] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [305.538430] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [305.539020] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [305.540051] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [305.540066] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [305.540515] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [305.544121] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [305.544135] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [305.544795] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [305.544814] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [305.544827] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [305.545358] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9 <7> [305.545712] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9 <7> [305.546037] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9 <7> [305.546363] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0 <7> [305.546703] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0 <7> [305.547027] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2 <7> [305.547344] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21 <7> [305.547671] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000 <7> [305.547983] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE <7> [305.548296] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7> [305.548644] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7> [305.548962] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39 <7> [305.549296] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7> [305.549642] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7> [305.549981] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7> [305.550317] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7> [305.550657] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7> [305.550990] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7> [305.551320] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7> [305.551655] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7> [305.551989] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7> [305.552322] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no <7> [305.552687] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no <7> [305.553022] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7> [305.553357] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7> [305.553684] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7> [305.554014] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no <7> [305.554351] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no <7> [305.554694] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7> [305.555031] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7> [305.555365] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes <7> [305.555711] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7> [305.556047] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no <7> [305.556394] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7> [305.556728] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7> [305.557064] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no <7> [305.557411] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no <7> [305.557745] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no <7> [305.558074] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7> [305.558415] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no <7> [305.558747] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7> [305.559077] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7> [305.559418] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7> [305.559753] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7> [305.560090] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no <7> [305.560433] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes <7> [305.560763] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7> [305.561100] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7> [305.561448] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7> [305.561766] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7> [305.562079] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7> [305.562414] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403 <7> [305.562733] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001 <7> [305.563059] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3 <7> [305.563406] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007 <7> [305.563734] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000 <7> [305.564064] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000 <7> [305.564408] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24 <7> [305.564734] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8 <7> [305.565064] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7> [305.565412] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7> [305.565738] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes <6> [305.566071] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [305.566076] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [305.566080] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [305.566640] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [305.566661] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [305.566674] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [305.567367] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [305.567773] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [305.568388] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [305.568834] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [305.568846] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [305.569246] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [305.572663] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [305.572678] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [305.573143] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [305.573159] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? yes <7> [305.573170] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no <7> [305.573179] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no <7> [305.573187] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no <7> [305.573195] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no <7> [305.573671] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [305.573724] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] found preferred mode: 3200x1800 <7> [305.573734] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [305.573814] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:58:pipe A] desired mode 3200x1800 set (0,0) <7> [305.574839] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:110:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [305.575343] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:109:DDI A/PHY A][CRTC:58:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [305.575778] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000 <7> [305.576202] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [305.576630] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:109:DDI A/PHY A] [CRTC:58:pipe A] <7> [305.577030] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [305.577489] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [305.577905] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [305.578323] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [305.578773] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [305.579182] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [305.579621] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [305.580023] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [305.580443] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [305.580852] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [305.581260] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [305.581692] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [305.582101] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [305.582533] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [305.582935] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [305.583340] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [305.583764] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [305.584176] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [305.584605] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [305.585011] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [305.585442] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [305.585854] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [305.586273] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [305.586704] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [305.587117] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [305.587551] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [305.587957] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [305.588367] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [305.588802] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [305.589210] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [305.589640] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [305.590049] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [305.590474] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [305.590892] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [305.591309] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [305.591736] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dpll_hw_state <7> [305.592142] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [305.592579] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 <7> [305.593001] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [305.593426] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [305.593844] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [305.594255] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [305.594669] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [305.595086] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [305.595515] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset <7> [305.607433] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [305.607828] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [305.608170] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [305.608568] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [305.608915] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [305.609258] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [305.609630] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [305.611496] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [305.611934] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [305.612299] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [305.612715] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [305.613071] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [305.613463] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:58:pipe A] allocated DPLL 0 <7> [305.613833] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:58:pipe A] reserving DPLL 0 <7> [305.614211] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: yes [modeset] <7> [305.614607] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [305.614962] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [305.615308] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [305.615708] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [305.616068] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [305.616448] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [305.616809] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [305.617179] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [305.617565] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [305.617913] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [305.618267] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [305.618644] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [305.618993] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [305.619341] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [305.619712] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [305.620059] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [305.620430] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [305.620777] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [305.621130] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [305.621480] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [305.621835] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [305.622196] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [305.622570] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [305.622920] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [305.623273] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [305.623661] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [305.624024] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [305.624404] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [305.624756] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [305.625111] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [305.625470] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [305.625811] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [305.626163] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [305.626524] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [305.626882] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [305.627243] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [305.627611] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [305.627962] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [305.628315] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [305.628697] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [305.629050] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [305.629410] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [305.629765] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [305.630109] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:111] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [305.630470] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [305.630817] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [305.631162] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [305.631526] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no <7> [305.633280] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [305.634855] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A] <7> [305.635229] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B] <7> [305.635601] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A] <7> [305.635956] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B] <7> [305.636301] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C] <7> [305.636664] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C] <7> [305.637007] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A] <7> [305.637357] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B] <7> [305.637720] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C] <7> [305.638840] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:58:pipe A] <7> [305.639229] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [305.640097] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power on <7> [305.640605] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [305.640991] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <6> [305.644456] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7> [305.652409] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [305.652821] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power on <7> [305.653229] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000000b <7> [305.853530] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [305.853873] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [305.854441] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [305.856484] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [305.857631] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [305.858770] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [305.859154] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [305.859639] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [305.861304] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Clock recovery OK <7> [305.861740] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [305.862101] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [305.863946] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [305.864325] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [305.864884] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [305.866556] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [305.866933] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [305.867750] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [305.868717] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [305.869090] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [305.869668] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 37 <7> [305.885674] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [305.887764] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1] <7> [305.888124] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [305.888822] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <6> [305.890840] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7> [305.891146] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [305.891176] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [305.891185] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [305.891302] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [305.891315] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [305.891636] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [305.892346] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [305.892513] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [305.892870] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [305.893193] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [305.893717] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [305.893731] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [305.893740] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [305.893780] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no <7> [305.894163] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [305.894694] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [305.895429] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [305.899506] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes: <7> [305.899522] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [305.899534] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [305.899548] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [305.899563] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [305.904139] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [305.904160] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [305.904174] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [305.905161] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [305.905579] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [305.906151] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [305.906607] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [305.906619] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [305.906984] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [305.910405] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [305.910419] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [305.910832] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [305.910849] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [305.910862] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [305.915316] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [305.915337] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [305.915351] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [305.916045] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [305.916421] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [305.916981] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [305.917778] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [305.917792] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [305.918170] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [305.921599] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [305.921615] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [305.922038] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [305.922066] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? yes <7> [305.922081] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no <7> [305.922090] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no <7> [305.922097] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no <7> [305.922106] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no <7> [305.922161] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [305.922193] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] found preferred mode: 3200x1800 <7> [305.922203] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [305.922245] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:58:pipe A] desired mode 3200x1800 set (0,0) <7> [305.922248] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [305.922273] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [305.922564] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [305.922857] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [305.923240] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [305.923600] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [305.923994] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [305.924006] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [305.924014] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [305.924069] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no <7> [305.924445] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [305.924794] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [305.926623] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes: <7> [305.926634] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [305.926643] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [305.926745] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [305.926753] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [305.930088] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [305.930526] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [305.931097] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [305.930919] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [305.931196] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [305.931204] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [305.931294] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [305.931679] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [305.931993] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [305.932061] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [305.932353] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [305.932808] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [305.933193] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [305.933335] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [305.933614] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [305.933890] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [305.933899] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [305.934544] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [305.937860] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [305.937875] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [305.938282] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [305.938441] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [305.938454] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [305.942941] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [305.943085] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [305.943097] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [305.946574] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [305.946977] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [305.947604] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [305.948004] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [305.948015] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [305.948411] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [305.953291] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [305.953304] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [305.953724] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [305.960745] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [305.960763] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <6> [305.961403] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input40 <7> [305.965276] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [305.966264] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [305.966279] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [305.967033] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [305.967430] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [305.970023] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [305.970464] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [305.970476] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [305.970819] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [305.974088] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [305.974099] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [305.974540] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [305.977526] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [305.977541] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [305.982531] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [305.983314] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [305.983329] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [305.984013] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [305.984372] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [305.985047] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [305.985648] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [305.985659] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [305.986009] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <6> [305.986387] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input41 <7> [305.991879] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [305.991892] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [305.992215] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [305.993770] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [305.993869] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [305.996432] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [305.996821] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [305.997186] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <6> [305.997819] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input42 <7> [305.999273] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [305.999287] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [305.999295] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [305.999332] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no <7> [305.999737] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [306.000098] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [306.002194] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes: <7> [306.002208] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [306.002220] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [306.002271] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [306.002282] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [306.007020] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [306.007098] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [306.007111] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [306.007785] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [306.008126] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [306.008757] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [306.009140] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [306.009151] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [306.011623] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [306.017639] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [306.017655] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [306.018073] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [306.018124] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [306.018135] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [306.022621] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [306.022669] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [306.022681] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [306.023333] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [306.023761] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [306.024287] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [306.024680] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [306.024691] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [306.025021] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [306.030481] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [306.030494] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [306.030947] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [306.033828] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:143] <7> [307.077731] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:58:pipe A] <7> [307.078226] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [307.078704] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [307.078983] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [307.079225] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [307.079482] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [307.079748] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [307.079989] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [307.080230] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [307.080492] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [307.080755] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [307.080996] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [307.081236] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [307.081497] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [307.081758] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [307.081998] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [307.082238] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [307.082496] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [307.082758] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [307.082999] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [307.083239] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [307.083540] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [307.083788] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [307.084028] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [307.084268] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [307.084541] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [307.084800] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [307.085040] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [307.085280] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [307.085568] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [307.085889] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [307.086148] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [307.086437] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [307.086761] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [307.087026] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [307.087278] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [307.087573] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [307.087846] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [307.088086] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [307.088346] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [307.088631] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset <7> [307.088872] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0 <7> [307.089145] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [307.089436] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [307.089668] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [307.089893] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [307.090118] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [307.090358] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [307.090604] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [307.090886] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [307.091145] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz <7> [307.091451] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [307.091800] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [307.092034] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [307.092267] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset] <7> [307.092529] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no <7> [307.092782] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [307.093012] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no <7> [307.093436] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [307.094819] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [307.152944] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [307.303516] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0 <7> [307.305397] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [307.322869] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off <7> [307.323406] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [307.323726] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time <7> [307.324281] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short <7> [307.324598] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [307.376204] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [307.376167] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [307.377184] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long <7> [307.377806] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [307.378485] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [307.381866] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A] <7> [307.381966] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [307.384026] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [307.384285] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [307.385754] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [307.387844] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A] <7> [307.389038] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B] <7> [307.390057] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A] <7> [307.391230] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B] <7> [307.392210] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C] <7> [307.393436] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C] <7> [307.394739] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A] <7> [307.395948] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B] <7> [307.396963] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C] <7> [307.398138] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1] <7> [307.400244] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [307.402520] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:83:pipe B] <7> [307.404383] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:108:pipe C] <7> [307.504020] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [307.505966] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [307.507532] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [307.509536] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [307.514789] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [307.536675] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [307.623579] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:110:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [307.624792] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:109:DDI A/PHY A][CRTC:58:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [307.626047] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000 <7> [307.627731] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [307.629337] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:109:DDI A/PHY A] [CRTC:58:pipe A] <7> [307.631406] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [307.632945] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [307.634589] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [307.635881] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [307.636976] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [307.638343] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [307.639347] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [307.640395] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [307.641453] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [307.642535] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [307.643679] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [307.645215] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [307.646569] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [307.647881] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [307.649115] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [307.650168] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [307.651230] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [307.652230] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [307.653314] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [307.654371] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [307.655449] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [307.656631] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [307.658168] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [307.659581] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [307.660763] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [307.661910] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [307.662931] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [307.664115] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [307.665169] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [307.666414] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [307.667448] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [307.668798] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [307.669872] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [307.671129] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [307.672204] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [307.673440] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [307.674487] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [307.675706] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [307.676711] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [307.678051] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset <7> [307.679382] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [307.680711] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [307.682256] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [307.683757] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [307.685270] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [307.686777] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [307.688014] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [307.689579] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [307.691348] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [307.692891] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [307.694412] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [307.695915] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [307.697115] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:58:pipe A] allocated DPLL 0 <7> [307.698371] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:58:pipe A] reserving DPLL 0 <7> [307.699406] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: yes [modeset] <7> [307.700665] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [307.701684] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [307.702895] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [307.703886] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [307.705069] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [307.706238] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [307.707550] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [307.708562] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [307.709811] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [307.710903] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [307.712069] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [307.713109] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [307.714562] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [307.715592] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [307.716824] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [307.718115] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [307.719346] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [307.720355] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [307.721545] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [307.722552] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [307.723777] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [307.724791] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [307.725963] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [307.726996] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [307.728532] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [307.729883] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [307.731092] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [307.732109] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [307.733333] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [307.734362] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [307.735554] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [307.736597] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [307.737859] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [307.739141] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [307.740348] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [307.741177] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [307.741837] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [307.742599] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [307.743192] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [307.743862] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [307.744621] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [307.745439] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [307.746120] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [307.746789] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:111] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [307.747546] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [307.748136] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [307.748806] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [307.749581] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no <7> [307.761401] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [307.771610] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [307.771911] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [307.772525] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [307.773222] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [307.773978] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [307.774922] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A] <7> [307.775233] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B] <7> [307.775594] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A] <7> [307.775942] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B] <7> [307.776225] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C] <7> [307.776538] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C] <7> [307.776881] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A] <7> [307.777141] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B] <7> [307.777397] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C] <7> [307.777937] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:58:pipe A] <7> [307.778205] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [307.778712] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power on <7> [307.779076] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (99 ms remaining) <7> [307.887731] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [307.957751] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [307.958948] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power on <7> [307.959996] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003 <7> [308.008928] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [308.010213] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long <7> [308.011410] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [308.012666] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [308.164533] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [308.166585] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [308.168615] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [308.171705] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on <7> [308.173138] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b <7> [308.181732] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [308.182940] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [308.188688] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [308.190313] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [308.191906] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [308.201069] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Clock recovery OK <7> [308.202612] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [308.204074] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [308.221124] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [308.222494] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [308.223822] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [308.228802] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [308.230331] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [308.233476] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [308.237414] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [308.238927] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [308.241199] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 37 <7> [308.248746] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 391 us, max time under evasion is 250 us <7> [308.255804] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [308.264911] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1] <7> [308.265816] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [308.269888] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [308.270703] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [308.275768] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [308.276958] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [308.277637] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [308.278448] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [308.278929] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [308.278942] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [308.279360] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [308.282876] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [308.282890] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [308.288922] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [308.294443] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [308.295714] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [308.296159] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [308.298754] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [308.299187] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [308.299200] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [308.299745] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [308.306520] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [308.306534] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [308.442118] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [308.442887] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [308.455312] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [308.491783] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [308.492121] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [308.505425] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [308.544094] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [308.545001] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [308.551676] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [308.551978] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [308.552209] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [308.552912] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [308.553313] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [308.553679] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [308.554047] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [308.554523] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [308.554896] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [308.555918] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [308.643574] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [308.644641] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [308.645125] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [308.645594] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <6> [308.650755] Console: switching to colour dummy device 80x25 <7> [308.651125] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:111] is removed <7> [308.652843] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [308.653688] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [308.654594] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [308.655432] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [308.656215] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [308.658309] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [308.670019] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [308.673724] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [308.674672] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [308.675604] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [308.676507] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [308.677406] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [308.678302] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [308.679169] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [308.680071] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [308.681111] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [308.682181] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [308.683068] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [308.684146] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [308.685203] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [308.686282] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [308.687403] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [308.688476] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [308.689529] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [308.690498] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [308.691479] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [308.692185] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [308.692910] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [308.693770] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [308.694502] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [308.695371] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [308.696027] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [308.696826] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [308.697867] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [308.698768] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [308.699589] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [308.700319] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [308.701122] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [308.701872] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [308.702704] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [308.703432] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [308.704309] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [308.705066] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [308.705782] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [308.706859] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [308.707949] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [308.709014] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset <7> [308.710087] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0 <7> [308.711947] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [308.712786] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [308.713836] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [308.715004] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [308.716047] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [308.717085] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [308.718138] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset] <7> [308.718978] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no <7> [308.719683] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [308.720435] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no <7> [308.724375] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [308.927526] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0 <7> [308.929746] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [308.940176] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off <7> [308.940695] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [308.941175] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time <7> [308.941748] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short <7> [308.942186] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [308.993832] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [308.993878] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [308.994984] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long <7> [308.996367] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A] <7> [308.996180] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [308.996469] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [308.998053] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [308.999730] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [309.002183] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [309.003136] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A] <7> [309.005041] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B] <7> [309.006306] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A] <7> [309.008024] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B] <7> [309.009476] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C] <7> [309.010942] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C] <7> [309.012110] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A] <7> [309.013523] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B] <7> [309.014733] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C] <7> [309.016119] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1] <7> [309.018798] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [309.089307] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [309.147453] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:110:eDP-1] removing connector from sysfs <7> [309.166944] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:118:DP-1] removing connector from sysfs <7> [309.173836] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:127:HDMI-A-1] removing connector from sysfs <7> [309.186763] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:133:DP-2] removing connector from sysfs <7> [309.189582] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:139:HDMI-A-2] removing connector from sysfs <7> [309.217378] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (278 ms remaining) <7> [309.503976] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [309.566294] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [310.134035] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS <6> [310.135220] [IGT] i915_pm_rpm: exiting, ret=0

<6> [295.163164] Console: switching to colour dummy device 80x25

<7> [295.168593] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [295.169441] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [295.169454] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [295.170203] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [295.170484] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [295.170708] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [295.171009] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [295.171021] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [295.171029] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [295.171065] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no

<7> [295.171373] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [295.171600] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [295.173298] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes:

<7> [295.173309] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [295.173318] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [295.173459] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [295.173469] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [295.177831] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [295.177944] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [295.177956] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [295.178720] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [295.179044] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [295.179468] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [295.179738] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [295.179754] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [295.179987] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [295.183039] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [295.183048] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [295.183323] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [295.183414] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [295.183422] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [295.187796] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [295.187883] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [295.187911] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [295.188402] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [295.188623] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [295.189024] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [295.189276] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [295.189283] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [295.189496] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [295.192513] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [295.192522] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [295.192819] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [295.199609] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [295.199621] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [295.203993] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [295.204634] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [295.204643] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [295.205240] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [295.205466] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [295.205871] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [295.206190] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [295.206201] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [295.206450] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [295.209459] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [295.209467] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [295.209727] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [295.210620] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [295.210633] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [295.215078] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [295.215680] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [295.215690] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [295.216207] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [295.216560] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [295.217087] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [295.217455] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [295.217465] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [295.217755] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [295.220812] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [295.220821] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [295.221122] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [295.221673] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [295.221683] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [295.222020] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [295.222267] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [295.222479] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [295.222728] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [295.222736] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [295.222741] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [295.222766] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no

<7> [295.223011] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [295.223282] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [295.224276] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes:

<7> [295.224287] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [295.224298] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [295.224339] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [295.224350] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [295.228807] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [295.228840] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [295.228848] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [295.229366] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [295.229722] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [295.230752] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [295.231062] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [295.231079] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [295.231286] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [295.234390] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [295.234402] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [295.234808] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [295.234854] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [295.234865] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [295.239315] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [295.239345] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [295.239353] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [295.239821] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [295.240077] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [295.240610] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [295.240984] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [295.240993] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [295.241326] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [295.244446] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [295.244466] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [295.244696] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [295.245351] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:144]

<7> [295.457068] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [296.289925] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:58:pipe A]

<7> [296.290509] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [296.291607] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [296.291951] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [296.292213] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [296.292473] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [296.292735] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [296.293014] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [296.293316] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [296.293576] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [296.293852] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [296.294161] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [296.294421] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [296.294685] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [296.294982] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [296.295272] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [296.295521] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [296.295771] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [296.296039] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [296.296342] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [296.296600] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [296.296856] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [296.297147] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [296.297388] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [296.297645] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [296.297929] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [296.298195] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [296.298435] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [296.298755] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [296.299021] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [296.299284] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [296.299582] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [296.299864] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [296.300125] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [296.300377] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [296.300749] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [296.301145] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [296.301522] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [296.301909] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [296.302285] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [296.302666] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset

<7> [296.303061] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0

<7> [296.303462] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [296.303721] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [296.303980] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [296.304255] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [296.304488] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [296.304722] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [296.304977] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [296.305311] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [296.305607] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz

<7> [296.305934] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [296.306312] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [296.306685] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [296.307078] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset]

<7> [296.307453] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no

<7> [296.307827] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [296.308215] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no

<7> [296.308788] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [296.310343] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [296.512145] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0

<7> [296.514354] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [296.519554] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off

<7> [296.520037] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [296.520566] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [296.521621] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [296.521577] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short

<7> [296.573105] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [296.573769] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [296.574238] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long

<7> [296.575253] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [296.575410] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [296.579782] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A]

<7> [296.579963] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [296.581378] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [296.583361] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [296.584558] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [296.587710] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A]

<7> [296.588898] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B]

<7> [296.589950] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A]

<7> [296.590928] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B]

<7> [296.591997] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C]

<7> [296.593128] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C]

<7> [296.594411] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A]

<7> [296.595415] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B]

<7> [296.596524] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C]

<7> [296.597603] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1]

<7> [296.599633] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [296.602408] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:83:pipe B]

<7> [296.603524] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:108:pipe C]

<7> [296.704459] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [296.706279] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [296.707389] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [296.708812] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [296.712044] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [296.735066] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [296.815664] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:110:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [296.816919] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:109:DDI A/PHY A][CRTC:58:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [296.818008] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000

<7> [296.819114] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [296.820338] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:109:DDI A/PHY A] [CRTC:58:pipe A]

<7> [296.821449] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [296.822683] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [296.823731] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [296.825610] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [296.826963] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [296.828451] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [296.829532] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [296.830730] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [296.831794] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [296.833049] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [296.834138] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [296.835448] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [296.836760] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [296.838378] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [296.839987] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [296.841204] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [296.842688] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [296.844204] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [296.845788] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [296.847323] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [296.848860] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [296.850421] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [296.851543] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [296.852913] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [296.854422] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [296.855894] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [296.857384] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [296.858894] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [296.860173] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [296.861458] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [296.862546] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [296.863856] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [296.864732] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [296.865721] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [296.866967] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [296.867857] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [296.868915] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [296.870194] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [296.871387] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [296.872397] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset

<7> [296.873941] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [296.875000] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [296.876024] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [296.877033] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [296.877877] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [296.879189] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [296.880289] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [296.882003] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [296.883614] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [296.884950] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [296.886246] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [296.887560] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [296.888889] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:58:pipe A] allocated DPLL 0

<7> [296.889897] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:58:pipe A] reserving DPLL 0

<7> [296.890990] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: yes [modeset]

<7> [296.891850] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [296.892881] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [296.893692] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [296.894615] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [296.895642] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [296.896567] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [296.897781] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [296.898712] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [296.899754] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [296.900667] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [296.901726] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [296.902603] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [296.903642] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [296.904529] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [296.905686] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [296.906593] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [296.907613] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [296.908501] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [296.909412] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [296.910280] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [296.911226] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [296.912090] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [296.912671] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [296.913252] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [296.913869] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [296.914513] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [296.915208] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [296.915896] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [296.916445] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [296.917034] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [296.917697] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [296.918385] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [296.919097] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [296.919641] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [296.920231] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [296.921000] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [296.921407] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [296.921835] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [296.922335] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [296.922742] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [296.923197] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [296.923689] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [296.924145] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [296.924652] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:111] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [296.925108] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [296.925696] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [296.926175] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [296.926641] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no

<7> [296.938922] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [296.948114] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [296.948383] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [296.948841] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [296.949520] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [296.950216] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [296.950993] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A]

<7> [296.951260] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B]

<7> [296.951505] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A]

<7> [296.951738] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B]

<7> [296.952007] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C]

<7> [296.952257] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C]

<7> [296.952488] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A]

<7> [296.952718] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B]

<7> [296.952988] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C]

<7> [296.953404] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:58:pipe A]

<7> [296.953650] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [296.954125] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power on

<7> [296.954536] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (121 ms remaining)

<7> [297.080269] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [297.089903] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [297.090345] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power on

<7> [297.090771] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003

<7> [297.140255] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [297.141401] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long

<7> [297.142419] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [297.143537] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [297.296042] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [297.297509] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [297.299069] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [297.302492] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on

<7> [297.304242] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b

<7> [297.313191] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [297.314450] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [297.318353] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [297.319998] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [297.321475] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [297.325846] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Clock recovery OK

<7> [297.327302] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [297.328902] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [297.333444] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [297.334534] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [297.335830] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [297.340342] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [297.341833] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [297.344354] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [297.346714] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [297.347893] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [297.349490] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 37

<7> [297.362654] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [297.368410] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1]

<7> [297.369747] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [297.374696] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [297.375918] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [297.381015] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [297.383402] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<6> [297.384380] [IGT] i915_pm_rpm: starting subtest module-reload

<7> [297.384663] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [297.386197] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [297.387719] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [297.387763] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [297.389942] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [297.396919] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [297.396968] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [297.399154] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [297.405722] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [297.407739] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [297.409240] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [297.411577] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [297.413127] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [297.413171] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [297.414775] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [297.419818] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [297.419848] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [297.527348] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [297.528166] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [297.540967] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [297.566407] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [297.566765] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [297.578918] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [297.618106] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [297.619480] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [297.629191] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [297.629618] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [297.630425] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [297.630827] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [297.631202] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [297.631566] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [297.633822] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [297.634227] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [297.634611] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [297.635586] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [297.722485] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [297.723189] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [297.723459] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [297.723724] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [297.725177] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:111] is removed

<7> [297.725316] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [297.725736] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [297.726222] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [297.726648] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [297.727086] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [297.727728] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [297.746071] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [297.746888] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [297.747228] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [297.747528] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [297.747943] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [297.748243] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [297.748542] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [297.748872] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [297.749203] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [297.749497] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [297.749838] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [297.750171] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [297.750466] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [297.750761] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [297.751207] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [297.751579] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [297.751962] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [297.752294] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [297.752590] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [297.753060] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [297.753431] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [297.753729] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [297.754064] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [297.754433] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [297.754850] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [297.755196] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [297.755496] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [297.755828] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [297.756148] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [297.756443] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [297.756738] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [297.757062] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [297.757380] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [297.757676] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [297.758008] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [297.758451] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [297.758798] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [297.759165] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [297.759463] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [297.759760] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [297.760119] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset

<7> [297.760435] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0

<7> [297.760902] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [297.761345] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [297.762991] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [297.763423] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [297.763863] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [297.764258] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [297.764661] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset]

<7> [297.765088] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no

<7> [297.765486] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [297.765902] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no

<7> [297.766704] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [297.976082] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0

<7> [297.978387] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [298.001114] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off

<7> [298.001564] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [298.002888] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [298.003366] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short

<7> [298.004729] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [298.056133] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [298.055991] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [298.057489] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long

<7> [298.058905] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [298.061557] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [298.063329] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [298.064861] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A]

<7> [298.067349] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [298.068627] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [298.072342] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A]

<7> [298.074388] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B]

<7> [298.076176] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A]

<7> [298.077916] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B]

<7> [298.079265] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C]

<7> [298.080574] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C]

<7> [298.081736] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A]

<7> [298.083307] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B]

<7> [298.085061] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C]

<7> [298.086844] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1]

<7> [298.090320] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [298.164578] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [298.210456] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:110:eDP-1] removing connector from sysfs

<7> [298.245716] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:118:DP-1] removing connector from sysfs

<7> [298.247889] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:127:HDMI-A-1] removing connector from sysfs

<7> [298.253762] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:133:DP-2] removing connector from sysfs

<7> [298.261231] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:139:HDMI-A-2] removing connector from sysfs

<7> [298.291041] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (267 ms remaining)

<7> [298.560343] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [298.591395] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<5> [300.002169] Setting dangerous option force_probe - tainting kernel

<6> [300.015232] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0

<7> [300.017295] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K

<7> [300.017706] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [300.018041] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH

<7> [300.018435] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [300.018906] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [300.019501] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [300.019860] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [300.020889] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [300.021130] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [300.021337] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [300.021543] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [300.021553] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [300.022217] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [300.022254] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [300.022505] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [300.022766] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7716 MiB [mem 0x00000000-0x1e24e0fff], io: n/a

<7> [300.023065] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a

<7> [300.023968] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018

<7> [300.024443] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [300.024854] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [300.025164] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [300.025419] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [300.033830] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [300.034115] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [300.034370] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [300.034625] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [300.034929] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [300.035351] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [300.035774] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no

<7> [300.036177] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [300.036577] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [300.037009] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no

<7> [300.037424] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes

<7> [300.037849] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no

<7> [300.038266] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3

<7> [300.038678] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [300.039075] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0

<7> [300.039473] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0

<7> [300.040713] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [300.041141] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203

<7> [300.041548] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [300.041980] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [300.042388] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [300.042805] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [300.043212] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 850)

<7> [300.043617] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [300.044040] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [300.044448] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [300.044866] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [300.045272] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136)

<7> [300.045687] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [300.046085] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [300.046482] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [300.046909] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [300.047315] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [300.047736] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [300.048133] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [300.048531] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [300.048938] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [300.049334] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [300.049742] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [300.050141] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [300.050553] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [300.050994] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [300.051504] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [300.051955] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [300.052364] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [300.052776] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [300.053170] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [300.053567] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [300.054101] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [300.054505] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [300.054923] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [300.055342] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [300.055848] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [300.056256] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [300.056674] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [300.057078] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [300.058329] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<7> [300.059810] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [300.060245] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [300.060668] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [300.061090] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [300.061367] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<6> [300.061931] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [300.063113] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [300.063609] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [300.063914] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided

<7> [300.064230] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec)

<7> [300.064596] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec)

<7> [300.065005] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec)

<7> [300.065397] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec)

<7> [300.065789] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec)

<7> [300.066177] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec)

<7> [300.066526] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec)

<7> [300.066863] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec)

<7> [300.067242] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec)

<7> [300.067635] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec)

<7> [300.068051] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec)

<7> [300.068439] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec)

<7> [300.068832] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec)

<7> [300.069198] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec)

<7> [300.069471] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec)

<7> [300.074529] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available.

<7> [300.080613] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [300.081113] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:109:DDI A/PHY A] Using AUX CH A (VBT)

<7> [300.081568] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:109:DDI A/PHY A]

<7> [300.089443] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [300.089777] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [300.090039] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [300.090300] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [300.090574] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [300.090865] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [300.091247] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP

<7> [300.091642] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [300.092070] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0

<7> [300.092477] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0

<7> [300.093047] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:109:DDI A/PHY A] initial power sequencer: PPS 0

<7> [300.093464] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [300.093905] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [300.094206] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [300.094581] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [300.094993] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [300.095415] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [300.096102] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on

<7> [300.096522] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [300.096975] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [300.106843] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [300.107149] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [300.107395] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [300.313630] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [300.316330] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [300.318084] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00

<7> [300.322932] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [300.340866] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [300.340925] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [300.340960] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [300.341427] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [300.342802] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [300.344328] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:110:eDP-1] DRRS type: static

<7> [300.346318] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:110:eDP-1] Using native PCH PWM for backlight control

<7> [300.347876] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:110:eDP-1] backlight initialized, disabled, brightness 0/937

<7> [300.350083] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [300.351829] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [300.353106] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [300.354618] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [300.355913] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [300.357491] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [300.360313] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:117:DDI B/PHY B] Using AUX CH B (VBT)

<7> [300.361910] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:117:DDI B/PHY B]

<7> [300.366832] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [300.368364] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:117:DDI B/PHY B]

<7> [300.369697] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:117:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [300.372831] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:132:DDI C/PHY C] Using AUX CH C (VBT)

<7> [300.374463] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:132:DDI C/PHY C]

<7> [300.378243] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [300.379789] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:132:DDI C/PHY C]

<7> [300.381115] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:132:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [300.384389] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled

<6> [300.385772] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem

<7> [300.386987] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] hw state readout: disabled

<7> [300.389462] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] hw state readout: disabled

<7> [300.391695] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] hw state readout: disabled

<7> [300.393267] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] hw state readout: disabled, pipe A

<7> [300.395051] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A

<7> [300.396823] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] hw state readout: disabled, pipe A

<7> [300.398753] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] hw state readout: disabled, pipe B

<7> [300.400911] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] hw state readout: disabled, pipe B

<7> [300.403193] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] hw state readout: disabled, pipe B

<7> [300.405417] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] hw state readout: disabled, pipe C

<7> [300.407612] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] hw state readout: disabled, pipe C

<7> [300.409439] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] hw state readout: disabled, pipe C

<7> [300.411397] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [300.413731] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [300.415755] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST A] hw state readout: disabled, pipe A

<7> [300.417774] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST B] hw state readout: disabled, pipe B

<7> [300.419478] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST C] hw state readout: disabled, pipe C

<7> [300.421317] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:132:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [300.423337] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST A] hw state readout: disabled, pipe A

<7> [300.424803] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST B] hw state readout: disabled, pipe B

<7> [300.426001] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST C] hw state readout: disabled, pipe C

<7> [300.427233] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [300.428244] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [300.429608] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [300.430938] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [300.432551] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:110:eDP-1] hw state readout: disabled

<7> [300.433572] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:118:DP-1] hw state readout: disabled

<7> [300.434331] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:127:HDMI-A-1] hw state readout: disabled

<7> [300.435049] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:133:DP-2] hw state readout: disabled

<7> [300.435773] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:139:HDMI-A-2] hw state readout: disabled

<7> [300.436431] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] min_cdclk 0 kHz

<7> [300.437035] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] min_cdclk 0 kHz

<7> [300.437713] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] min_cdclk 0 kHz

<7> [300.438260] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] min_cdclk 0 kHz

<7> [300.438985] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] min_cdclk 0 kHz

<7> [300.439608] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] min_cdclk 0 kHz

<7> [300.440215] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] min_cdclk 0 kHz

<7> [300.440883] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] min_cdclk 0 kHz

<7> [300.441430] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] min_cdclk 0 kHz

<7> [300.442011] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] min_cdclk 0 kHz

<7> [300.442513] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] min_cdclk 0 kHz

<7> [300.443014] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] min_cdclk 0 kHz

<7> [300.443544] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:58:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [300.444052] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:83:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [300.444546] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:108:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [300.445376] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [setup_hw_state]

<7> [300.445843] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [setup_hw_state]

<7> [300.446264] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [setup_hw_state]

<7> [300.446712] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [300.447344] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [300.447827] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [300.448258] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [300.448710] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global

<7> [300.451923] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [300.452300] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [300.452650] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0

<7> [300.475967] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [300.476217] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [300.476415] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [300.476610] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [300.476968] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 0: start 0x8

<7> [300.477252] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 1: start 0x108

<7> [300.477508] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 2: start 0x208

<7> [300.477851] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 3: start 0x308

<7> [300.478194] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 4: start 0x3c8

<7> [300.478450] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 0: start 0x8

<7> [300.478751] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 1: start 0x108

<7> [300.479060] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 2: start 0x208

<7> [300.479316] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 3: start 0x308

<7> [300.479676] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 4: start 0x3c8

<7> [300.480054] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 0: start 0x8

<7> [300.480446] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 1: start 0x108

<7> [300.480845] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 2: start 0x208

<7> [300.481222] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 3: start 0x308

<7> [300.481479] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 4: start 0x3c8

<7> [300.482093] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [fastset]

<7> [300.482490] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [fastset]

<7> [300.482894] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [fastset]

<7> [300.483551] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [300.484292] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:83:pipe B]

<7> [300.484780] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:108:pipe C]

<7> [300.485395] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [300.491857] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:110:eDP-1] adding connector to sysfs

<7> [300.494170] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:110:eDP-1] backlight device intel_backlight registered

<7> [300.494746] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:110:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [300.495444] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [300.499007] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:110:eDP-1] generating connector hotplug event

<7> [300.499149] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:118:DP-1] adding connector to sysfs

<7> [300.500244] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [300.503217] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:118:DP-1] generating connector hotplug event

<7> [300.503326] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:127:HDMI-A-1] adding connector to sysfs

<7> [300.504360] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:127:HDMI-A-1] generating connector hotplug event

<7> [300.504506] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:133:DP-2] adding connector to sysfs

<7> [300.505963] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [300.509786] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:133:DP-2] generating connector hotplug event

<7> [300.509912] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:139:HDMI-A-2] adding connector to sysfs

<7> [300.510806] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:139:HDMI-A-2] generating connector hotplug event

<6> [300.510940] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0

<7> [300.516600] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [300.549806] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [300.560187] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input35

<7> [300.563676] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [300.569540] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [300.570023] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:118:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [300.570455] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [300.570912] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:127:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [300.571331] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [300.571748] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:133:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [300.573651] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [300.573699] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:58:pipe A] not active, skipping

<7> [300.574122] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:139:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [300.574134] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:83:pipe B] not active, skipping

<7> [300.574593] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [300.574573] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:108:pipe C] not active, skipping

<7> [300.574958] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config

<7> [300.576167] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [300.579340] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [300.579494] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [300.579510] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [300.579972] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] status updated from unknown to disconnected

<7> [300.579994] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] disconnected

<7> [300.580016] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [300.580358] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:110:eDP-1] EDID changed, epoch counter 2

<7> [300.580389] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [300.580401] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [300.580850] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [300.581413] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [300.581450] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [300.581863] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [300.582113] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [300.582126] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [300.582528] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [300.582570] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [300.582582] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [300.583011] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [300.585808] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [300.585820] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? no

<7> [300.585829] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no

<7> [300.585838] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no

<7> [300.585846] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no

<7> [300.585854] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no

<7> [300.585912] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [300.585933] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [300.586041] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [300.586057] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [300.589075] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9

<7> [300.589542] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0

<7> [300.589990] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no

<7> [300.590405] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no

<7> [300.590852] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no

<7> [300.591269] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes

<7> [300.591715] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes

<7> [300.592133] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no

<7> [300.592547] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes

<7> [300.592976] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no

<7> [300.593390] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes

<7> [300.593818] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no

<7> [300.594232] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes

<7> [300.594659] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no

<7> [300.595069] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes

<7> [300.595480] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes

<7> [300.595928] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no

<7> [300.596343] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no

<7> [300.596793] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes

<7> [300.597205] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes

<7> [300.597653] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no

<7> [300.598069] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz

<7> [300.598792] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [300.598933] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [300.598949] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [300.599354] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] disconnected

<7> [300.599371] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [300.599383] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [300.599800] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [300.599814] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [300.599826] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [300.600220] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [300.600232] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [300.600243] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [300.600663] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [300.600676] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [300.600688] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [300.601078] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [300.601090] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [300.601099] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? no

<7> [300.601108] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no

<7> [300.601116] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no

<7> [300.601124] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no

<7> [300.601132] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no

<7> [300.601193] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [300.601213] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [300.601313] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [300.601343] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [300.601512] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [300.602573] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device

<7> [300.603055] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [300.603487] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [300.603926] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [300.604347] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [300.604803] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [300.605586] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9

<7> [300.606495] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9

<7> [300.606927] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9

<7> [300.607254] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0

<7> [300.607579] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0

<7> [300.607908] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2

<7> [300.608231] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21

<7> [300.608556] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000

<7> [300.608895] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE

<7> [300.609217] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48

<7> [300.609540] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2

<7> [300.609876] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39

<7> [300.610203] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no

<7> [300.610527] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no

<7> [300.610859] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no

<7> [300.611183] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes

<7> [300.611491] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no

<7> [300.611822] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no

<7> [300.612143] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes

<7> [300.612464] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes

<7> [300.612792] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no

<7> [300.613111] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no

<7> [300.613436] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no

<7> [300.613760] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes

<7> [300.614075] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no

<7> [300.614392] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no

<7> [300.614731] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no

<7> [300.615054] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no

<7> [300.615375] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no

<7> [300.615708] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no

<7> [300.616028] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes

<7> [300.616347] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes

<7> [300.616688] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no

<7> [300.617026] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no

<7> [300.617348] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no

<7> [300.617687] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no

<7> [300.618004] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no

<7> [300.618331] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no

<7> [300.618673] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no

<7> [300.618999] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no

<7> [300.619325] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes

<7> [300.619668] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no

<7> [300.619994] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes

<7> [300.620316] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes

<7> [300.620654] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no

<7> [300.620981] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes

<7> [300.621306] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no

<7> [300.621646] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no

<7> [300.621973] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no

<7> [300.622298] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no

<7> [300.622640] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled

<7> [300.622966] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403

<7> [300.623284] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001

<7> [300.623600] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3

<7> [300.623931] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007

<7> [300.624257] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000

<7> [300.624583] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000

<7> [300.624926] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24

<7> [300.625252] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8

<7> [300.625574] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no

<7> [300.625908] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no

<7> [300.626227] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes

<6> [300.626547] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [300.626552] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [300.626556] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [300.639503] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4

<6> [300.640375] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])

<7> [300.641093] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [300.641955] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [300.648721] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [300.676350] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [300.676648] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [300.676889] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [300.677117] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [300.677344] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [300.677570] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [300.677926] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [300.678274] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [300.678655] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<6> [300.698237] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36

<6> [300.725244] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input37

<6> [300.730031] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input38

<7> [301.937867] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [302.914878] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD off

<7> [302.915788] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [302.916669] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [302.917478] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [302.917844] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [302.917901] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [302.918263] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long

<7> [302.918842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [302.919039] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [302.919964] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [302.920113] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [302.926571] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [303.067597] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [303.097701] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [303.105819] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [303.106164] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [303.106426] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [303.106536] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [303.106775] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [303.107298] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [303.107372] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [303.107975] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [303.108097] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [303.108498] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [303.121689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [303.121996] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [303.122241] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [303.122476] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [303.123146] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [303.232641] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [303.233043] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [303.234068] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [303.234735] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [303.237202] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [303.244119] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [303.244388] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [303.244626] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [303.244930] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [303.245266] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [303.245624] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [303.245972] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [303.246313] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [303.246684] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [303.247419] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [303.248192] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [303.248574] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [303.248925] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [303.249679] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [303.342038] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [303.342997] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [303.344569] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [303.346215] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [303.348111] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [303.349535] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [303.350975] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [303.352363] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [303.353872] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [303.412911] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [303.442926] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:110:eDP-1] removing connector from sysfs

<7> [303.454468] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:118:DP-1] removing connector from sysfs

<7> [303.463052] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:127:HDMI-A-1] removing connector from sysfs

<7> [303.478816] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:133:DP-2] removing connector from sysfs

<7> [303.489593] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:139:HDMI-A-2] removing connector from sysfs

<7> [303.524544] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [303.525100] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [303.537661] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<5> [304.863171] Setting dangerous option force_probe - tainting kernel

<6> [304.875382] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0

<7> [304.876954] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K

<7> [304.877359] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [304.877673] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH

<7> [304.877954] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [304.878258] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [304.878789] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [304.879017] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [304.880107] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [304.880327] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [304.880558] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [304.880781] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [304.880855] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [304.881501] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [304.881540] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [304.881781] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [304.882030] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7716 MiB [mem 0x00000000-0x1e24e0fff], io: n/a

<7> [304.882225] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a

<7> [304.882966] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018

<7> [304.883461] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [304.883851] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [304.884235] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [304.884624] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [304.892446] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [304.892791] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [304.893039] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [304.893286] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [304.893581] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [304.893910] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [304.894167] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no

<7> [304.894439] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [304.894749] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [304.895004] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no

<7> [304.895258] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes

<7> [304.895613] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no

<7> [304.895991] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3

<7> [304.896252] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [304.896532] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0

<7> [304.896914] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0

<7> [304.898566] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [304.898855] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203

<7> [304.899189] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [304.899608] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [304.900003] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [304.900396] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [304.900808] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 850)

<7> [304.901124] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [304.901387] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [304.901739] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [304.902140] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [304.902549] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136)

<7> [304.902934] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [304.903263] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [304.903552] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [304.903843] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [304.904230] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [304.904635] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [304.905018] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [304.905399] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [304.905785] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [304.906095] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [304.906347] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [304.906622] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [304.907017] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [304.907439] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [304.907938] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [304.908324] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [304.908611] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [304.908903] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [304.909254] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [304.909659] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [304.910162] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [304.910563] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [304.910873] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [304.911141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [304.911483] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [304.911873] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [304.912267] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [304.912678] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [304.913731] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<7> [304.914971] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [304.915258] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [304.915528] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [304.915840] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [304.917616] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [304.918396] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<6> [304.918714] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [304.918892] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [304.919153] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided

<7> [304.919531] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec)

<7> [304.919913] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec)

<7> [304.920291] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec)

<7> [304.920680] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec)

<7> [304.921040] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec)

<7> [304.921304] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec)

<7> [304.921567] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec)

<7> [304.921849] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec)

<7> [304.922099] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec)

<7> [304.922346] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec)

<7> [304.922612] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec)

<7> [304.922912] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec)

<7> [304.923161] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec)

<7> [304.923409] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec)

<7> [304.923731] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec)

<7> [304.928443] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available.

<7> [304.932421] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [304.932872] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:109:DDI A/PHY A] Using AUX CH A (VBT)

<7> [304.933300] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:109:DDI A/PHY A]

<7> [304.941439] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [304.941886] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [304.942282] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [304.942819] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [304.943390] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [304.943788] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [304.944186] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP

<7> [304.944703] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [304.945102] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0

<7> [304.945506] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0

<7> [304.946033] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:109:DDI A/PHY A] initial power sequencer: PPS 0

<7> [304.946476] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [304.946851] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [304.947223] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [304.947676] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [304.948054] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [304.948493] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [304.949143] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on

<7> [304.949573] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [304.950009] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [304.959605] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [304.959914] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [304.960161] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [305.169323] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [305.170216] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [305.174897] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00

<7> [305.180189] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [305.198039] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [305.198079] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [305.198104] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [305.198707] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [305.200037] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [305.201211] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:110:eDP-1] DRRS type: static

<7> [305.202727] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:110:eDP-1] Using native PCH PWM for backlight control

<7> [305.203939] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:110:eDP-1] backlight initialized, disabled, brightness 0/937

<7> [305.205629] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [305.206694] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [305.207867] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [305.209041] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [305.210343] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [305.212004] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [305.215250] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:117:DDI B/PHY B] Using AUX CH B (VBT)

<7> [305.217111] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:117:DDI B/PHY B]

<7> [305.221992] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [305.223870] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:117:DDI B/PHY B]

<7> [305.225575] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:117:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [305.228602] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:132:DDI C/PHY C] Using AUX CH C (VBT)

<7> [305.229873] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:132:DDI C/PHY C]

<7> [305.232773] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [305.234058] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:132:DDI C/PHY C]

<7> [305.235176] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:132:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [305.238619] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled

<6> [305.239823] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem

<7> [305.240958] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] hw state readout: disabled

<7> [305.242817] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] hw state readout: disabled

<7> [305.244615] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] hw state readout: disabled

<7> [305.245988] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] hw state readout: disabled, pipe A

<7> [305.247303] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A

<7> [305.248864] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] hw state readout: disabled, pipe A

<7> [305.250197] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] hw state readout: disabled, pipe B

<7> [305.251592] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] hw state readout: disabled, pipe B

<7> [305.252915] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] hw state readout: disabled, pipe B

<7> [305.254228] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] hw state readout: disabled, pipe C

<7> [305.255590] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] hw state readout: disabled, pipe C

<7> [305.256933] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] hw state readout: disabled, pipe C

<7> [305.258497] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [305.260045] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [305.261219] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST A] hw state readout: disabled, pipe A

<7> [305.262564] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST B] hw state readout: disabled, pipe B

<7> [305.263796] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST C] hw state readout: disabled, pipe C

<7> [305.265273] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:132:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [305.266455] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST A] hw state readout: disabled, pipe A

<7> [305.267895] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST B] hw state readout: disabled, pipe B

<7> [305.269557] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST C] hw state readout: disabled, pipe C

<7> [305.271474] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [305.273365] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [305.275264] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [305.276922] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [305.278741] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:110:eDP-1] hw state readout: disabled

<7> [305.280837] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:118:DP-1] hw state readout: disabled

<7> [305.282925] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:127:HDMI-A-1] hw state readout: disabled

<7> [305.284994] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:133:DP-2] hw state readout: disabled

<7> [305.286697] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:139:HDMI-A-2] hw state readout: disabled

<7> [305.287929] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] min_cdclk 0 kHz

<7> [305.289030] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] min_cdclk 0 kHz

<7> [305.290097] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] min_cdclk 0 kHz

<7> [305.291186] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] min_cdclk 0 kHz

<7> [305.292004] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] min_cdclk 0 kHz

<7> [305.292845] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] min_cdclk 0 kHz

<7> [305.293927] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] min_cdclk 0 kHz

<7> [305.295026] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] min_cdclk 0 kHz

<7> [305.296095] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] min_cdclk 0 kHz

<7> [305.296880] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] min_cdclk 0 kHz

<7> [305.297466] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] min_cdclk 0 kHz

<7> [305.298015] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] min_cdclk 0 kHz

<7> [305.298819] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:58:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [305.299594] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:83:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [305.300349] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:108:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [305.301640] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [setup_hw_state]

<7> [305.302315] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [setup_hw_state]

<7> [305.302932] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [setup_hw_state]

<7> [305.303593] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [305.304208] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [305.304639] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [305.305183] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [305.305630] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global

<7> [305.308812] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [305.309223] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [305.309724] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0

<7> [305.334968] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [305.335222] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [305.335446] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [305.335684] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [305.335885] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 0: start 0x8

<7> [305.336145] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 1: start 0x108

<7> [305.336455] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 2: start 0x208

<7> [305.336761] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 3: start 0x308

<7> [305.337017] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 4: start 0x3c8

<7> [305.337272] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 0: start 0x8

<7> [305.337552] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 1: start 0x108

<7> [305.337861] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 2: start 0x208

<7> [305.338126] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 3: start 0x308

<7> [305.338407] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 4: start 0x3c8

<7> [305.338685] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 0: start 0x8

<7> [305.338940] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 1: start 0x108

<7> [305.339195] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 2: start 0x208

<7> [305.339553] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 3: start 0x308

<7> [305.339809] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 4: start 0x3c8

<7> [305.340278] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [fastset]

<7> [305.340559] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [fastset]

<7> [305.340856] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [fastset]

<7> [305.341314] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [305.341968] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:83:pipe B]

<7> [305.342404] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:108:pipe C]

<7> [305.343016] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [305.350765] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:110:eDP-1] adding connector to sysfs

<7> [305.354010] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:110:eDP-1] backlight device intel_backlight registered

<7> [305.354519] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:110:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [305.355553] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [305.359387] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:110:eDP-1] generating connector hotplug event

<7> [305.359584] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:118:DP-1] adding connector to sysfs

<7> [305.360682] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [305.365134] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:118:DP-1] generating connector hotplug event

<7> [305.365287] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:127:HDMI-A-1] adding connector to sysfs

<7> [305.366479] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:127:HDMI-A-1] generating connector hotplug event

<7> [305.366625] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:133:DP-2] adding connector to sysfs

<7> [305.368185] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [305.370595] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:133:DP-2] generating connector hotplug event

<7> [305.370722] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:139:HDMI-A-2] adding connector to sysfs

<7> [305.371755] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:139:HDMI-A-2] generating connector hotplug event

<6> [305.371888] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0

<7> [305.377817] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [305.416605] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [305.430378] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input39

<7> [305.434371] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [305.439161] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [305.439479] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:58:pipe A] not active, skipping

<7> [305.439872] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:83:pipe B] not active, skipping

<7> [305.440245] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:108:pipe C] not active, skipping

<7> [305.440673] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config

<7> [305.441322] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [305.443851] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:118:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [305.444307] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [305.444992] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [305.447036] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [305.447566] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [305.448165] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [305.448640] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [305.448652] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [305.449044] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [305.453089] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [305.453103] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [305.453697] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:127:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [305.454122] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [305.459539] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:133:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [305.460008] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [305.460743] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [305.461143] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [305.461760] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [305.462193] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [305.462204] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [305.464406] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [305.467699] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [305.467715] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [305.468190] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:139:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [305.469542] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [305.469557] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [305.469572] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [305.470185] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [305.470619] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [305.470995] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [305.472486] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [305.472502] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [305.472511] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [305.472557] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no

<7> [305.473001] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [305.473481] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [305.475400] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] status updated from unknown to connected

<7> [305.475650] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [305.476162] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes:

<7> [305.476175] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [305.476187] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [305.476201] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [305.476214] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [305.480820] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [305.480840] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [305.480853] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [305.481963] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [305.482423] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [305.483028] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [305.483524] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [305.483537] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [305.483936] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [305.487362] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [305.487376] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [305.487873] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [305.487891] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [305.487904] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [305.492488] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [305.492509] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [305.492522] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [305.493266] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [305.493725] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [305.494316] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [305.495419] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [305.495434] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [305.495863] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [305.499911] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [305.499925] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [305.500506] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [305.500522] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? yes

<7> [305.500532] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no

<7> [305.500541] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no

<7> [305.500550] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no

<7> [305.500558] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no

<7> [305.500616] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [305.500655] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] found preferred mode: 3200x1800

<7> [305.500665] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [305.500698] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:58:pipe A] desired mode 3200x1800 set (0,0)

<7> [305.500833] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [305.500888] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] no BIOS fb, allocating a new one

<7> [305.507919] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 3200x1800 fb: 0x00180000

<6> [305.509862] fbcon: i915drmfb (fb0) is primary device

<6> [305.511517] Console: switching to colour frame buffer device 200x56

<6> [305.511537] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device

<7> [305.511551] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9

<7> [305.512014] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0

<7> [305.512440] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no

<7> [305.512852] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no

<7> [305.513260] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no

<7> [305.513698] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes

<7> [305.514104] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes

<7> [305.514533] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no

<7> [305.514946] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes

<7> [305.515357] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no

<7> [305.515787] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes

<7> [305.516197] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no

<7> [305.516624] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes

<7> [305.517029] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no

<7> [305.517475] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes

<7> [305.517890] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes

<7> [305.518305] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no

<7> [305.518742] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no

<7> [305.519155] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes

<7> [305.519586] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes

<7> [305.520002] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no

<7> [305.520429] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz

<7> [305.521027] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [305.521046] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [305.521892] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [305.521918] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [305.522698] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [305.523115] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [305.523540] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [305.524606] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [305.524620] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [305.524639] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [305.524704] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no

<7> [305.525127] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [305.525553] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [305.528190] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes:

<7> [305.528214] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [305.528227] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [305.528241] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [305.528254] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [305.531497] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device

<7> [305.531999] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [305.533435] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [305.533891] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [305.534306] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [305.536080] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [305.536955] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [305.536975] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [305.536988] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [305.537997] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [305.538430] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [305.539020] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [305.540051] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [305.540066] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [305.540515] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [305.544121] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [305.544135] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [305.544795] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [305.544814] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [305.544827] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [305.545358] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9

<7> [305.545712] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9

<7> [305.546037] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9

<7> [305.546363] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0

<7> [305.546703] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0

<7> [305.547027] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2

<7> [305.547344] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21

<7> [305.547671] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000

<7> [305.547983] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE

<7> [305.548296] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48

<7> [305.548644] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2

<7> [305.548962] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39

<7> [305.549296] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no

<7> [305.549642] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no

<7> [305.549981] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no

<7> [305.550317] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes

<7> [305.550657] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no

<7> [305.550990] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no

<7> [305.551320] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes

<7> [305.551655] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes

<7> [305.551989] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no

<7> [305.552322] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no

<7> [305.552687] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no

<7> [305.553022] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes

<7> [305.553357] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no

<7> [305.553684] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no

<7> [305.554014] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no

<7> [305.554351] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no

<7> [305.554694] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no

<7> [305.555031] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no

<7> [305.555365] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes

<7> [305.555711] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes

<7> [305.556047] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no

<7> [305.556394] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no

<7> [305.556728] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no

<7> [305.557064] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no

<7> [305.557411] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no

<7> [305.557745] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no

<7> [305.558074] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no

<7> [305.558415] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no

<7> [305.558747] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes

<7> [305.559077] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no

<7> [305.559418] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes

<7> [305.559753] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes

<7> [305.560090] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no

<7> [305.560433] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes

<7> [305.560763] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no

<7> [305.561100] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no

<7> [305.561448] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no

<7> [305.561766] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no

<7> [305.562079] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled

<7> [305.562414] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403

<7> [305.562733] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001

<7> [305.563059] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3

<7> [305.563406] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007

<7> [305.563734] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000

<7> [305.564064] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000

<7> [305.564408] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24

<7> [305.564734] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8

<7> [305.565064] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no

<7> [305.565412] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no

<7> [305.565738] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes

<6> [305.566071] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [305.566076] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [305.566080] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [305.566640] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [305.566661] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [305.566674] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [305.567367] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [305.567773] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [305.568388] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [305.568834] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [305.568846] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [305.569246] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [305.572663] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [305.572678] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [305.573143] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [305.573159] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? yes

<7> [305.573170] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no

<7> [305.573179] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no

<7> [305.573187] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no

<7> [305.573195] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no

<7> [305.573671] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [305.573724] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] found preferred mode: 3200x1800

<7> [305.573734] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [305.573814] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:58:pipe A] desired mode 3200x1800 set (0,0)

<7> [305.574839] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:110:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [305.575343] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:109:DDI A/PHY A][CRTC:58:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [305.575778] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000

<7> [305.576202] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [305.576630] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:109:DDI A/PHY A] [CRTC:58:pipe A]

<7> [305.577030] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [305.577489] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [305.577905] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [305.578323] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [305.578773] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [305.579182] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [305.579621] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [305.580023] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [305.580443] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [305.580852] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [305.581260] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [305.581692] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [305.582101] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [305.582533] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [305.582935] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [305.583340] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [305.583764] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [305.584176] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [305.584605] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [305.585011] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [305.585442] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [305.585854] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [305.586273] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [305.586704] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [305.587117] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [305.587551] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [305.587957] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [305.588367] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [305.588802] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [305.589210] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [305.589640] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [305.590049] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [305.590474] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [305.590892] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [305.591309] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [305.591736] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dpll_hw_state

<7> [305.592142] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [305.592579] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0

<7> [305.593001] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [305.593426] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [305.593844] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [305.594255] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [305.594669] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [305.595086] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [305.595515] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset

<7> [305.607433] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [305.607828] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [305.608170] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [305.608568] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [305.608915] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [305.609258] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [305.609630] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [305.611496] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [305.611934] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [305.612299] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [305.612715] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [305.613071] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [305.613463] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:58:pipe A] allocated DPLL 0

<7> [305.613833] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:58:pipe A] reserving DPLL 0

<7> [305.614211] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: yes [modeset]

<7> [305.614607] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [305.614962] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [305.615308] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [305.615708] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [305.616068] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [305.616448] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [305.616809] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [305.617179] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [305.617565] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [305.617913] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [305.618267] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [305.618644] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [305.618993] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [305.619341] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [305.619712] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [305.620059] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [305.620430] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [305.620777] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [305.621130] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [305.621480] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [305.621835] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [305.622196] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [305.622570] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [305.622920] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [305.623273] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [305.623661] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [305.624024] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [305.624404] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [305.624756] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [305.625111] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [305.625470] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [305.625811] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [305.626163] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [305.626524] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [305.626882] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [305.627243] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [305.627611] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [305.627962] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [305.628315] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [305.628697] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [305.629050] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [305.629410] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [305.629765] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [305.630109] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:111] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [305.630470] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [305.630817] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [305.631162] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [305.631526] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no

<7> [305.633280] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [305.634855] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A]

<7> [305.635229] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B]

<7> [305.635601] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A]

<7> [305.635956] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B]

<7> [305.636301] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C]

<7> [305.636664] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C]

<7> [305.637007] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A]

<7> [305.637357] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B]

<7> [305.637720] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C]

<7> [305.638840] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:58:pipe A]

<7> [305.639229] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [305.640097] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power on

<7> [305.640605] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [305.640991] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<6> [305.644456] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4

<7> [305.652409] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [305.652821] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power on

<7> [305.653229] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000000b

<7> [305.853530] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [305.853873] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [305.854441] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [305.856484] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [305.857631] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [305.858770] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [305.859154] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [305.859639] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [305.861304] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Clock recovery OK

<7> [305.861740] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [305.862101] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [305.863946] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [305.864325] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [305.864884] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [305.866556] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [305.866933] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [305.867750] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [305.868717] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [305.869090] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [305.869668] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 37

<7> [305.885674] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [305.887764] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1]

<7> [305.888124] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [305.888822] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp

<6> [305.890840] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])

<7> [305.891146] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [305.891176] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [305.891185] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [305.891302] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [305.891315] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [305.891636] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [305.892346] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [305.892513] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [305.892870] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [305.893193] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [305.893717] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [305.893731] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [305.893740] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [305.893780] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no

<7> [305.894163] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [305.894694] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [305.895429] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [305.899506] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes:

<7> [305.899522] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [305.899534] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [305.899548] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [305.899563] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [305.904139] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [305.904160] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [305.904174] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [305.905161] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [305.905579] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [305.906151] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [305.906607] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [305.906619] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [305.906984] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [305.910405] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [305.910419] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [305.910832] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [305.910849] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [305.910862] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [305.915316] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [305.915337] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [305.915351] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [305.916045] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [305.916421] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [305.916981] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [305.917778] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [305.917792] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [305.918170] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [305.921599] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [305.921615] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [305.922038] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [305.922066] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? yes

<7> [305.922081] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no

<7> [305.922090] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no

<7> [305.922097] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no

<7> [305.922106] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no

<7> [305.922161] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [305.922193] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] found preferred mode: 3200x1800

<7> [305.922203] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [305.922245] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:58:pipe A] desired mode 3200x1800 set (0,0)

<7> [305.922248] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [305.922273] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [305.922564] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [305.922857] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [305.923240] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [305.923600] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [305.923994] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [305.924006] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [305.924014] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [305.924069] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no

<7> [305.924445] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [305.924794] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [305.926623] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes:

<7> [305.926634] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [305.926643] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [305.926745] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [305.926753] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [305.930088] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [305.930526] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [305.931097] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [305.930919] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [305.931196] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [305.931204] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [305.931294] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [305.931679] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [305.931993] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [305.932061] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [305.932353] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [305.932808] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [305.933193] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [305.933335] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [305.933614] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [305.933890] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [305.933899] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [305.934544] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [305.937860] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [305.937875] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [305.938282] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [305.938441] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [305.938454] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [305.942941] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [305.943085] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [305.943097] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [305.946574] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [305.946977] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [305.947604] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [305.948004] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [305.948015] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [305.948411] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [305.953291] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [305.953304] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [305.953724] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [305.960745] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [305.960763] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<6> [305.961403] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input40

<7> [305.965276] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [305.966264] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [305.966279] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [305.967033] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [305.967430] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [305.970023] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [305.970464] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [305.970476] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [305.970819] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [305.974088] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [305.974099] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [305.974540] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [305.977526] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [305.977541] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [305.982531] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [305.983314] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [305.983329] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [305.984013] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [305.984372] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [305.985047] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [305.985648] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [305.985659] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [305.986009] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<6> [305.986387] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input41

<7> [305.991879] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [305.991892] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [305.992215] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [305.993770] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [305.993869] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [305.996432] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [305.996821] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [305.997186] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<6> [305.997819] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input42

<7> [305.999273] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [305.999287] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [305.999295] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [305.999332] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no

<7> [305.999737] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [306.000098] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [306.002194] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes:

<7> [306.002208] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [306.002220] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [306.002271] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [306.002282] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [306.007020] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [306.007098] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [306.007111] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [306.007785] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [306.008126] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [306.008757] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [306.009140] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [306.009151] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [306.011623] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [306.017639] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [306.017655] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [306.018073] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [306.018124] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [306.018135] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [306.022621] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [306.022669] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [306.022681] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [306.023333] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [306.023761] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [306.024287] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [306.024680] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [306.024691] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [306.025021] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [306.030481] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [306.030494] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [306.030947] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [306.033828] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:143]

<7> [307.077731] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:58:pipe A]

<7> [307.078226] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [307.078704] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [307.078983] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [307.079225] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [307.079482] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [307.079748] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [307.079989] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [307.080230] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [307.080492] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [307.080755] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [307.080996] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [307.081236] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [307.081497] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [307.081758] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [307.081998] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [307.082238] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [307.082496] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [307.082758] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [307.082999] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [307.083239] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [307.083540] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [307.083788] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [307.084028] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [307.084268] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [307.084541] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [307.084800] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [307.085040] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [307.085280] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [307.085568] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [307.085889] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [307.086148] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [307.086437] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [307.086761] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [307.087026] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [307.087278] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [307.087573] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [307.087846] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [307.088086] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [307.088346] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [307.088631] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset

<7> [307.088872] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0

<7> [307.089145] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [307.089436] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [307.089668] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [307.089893] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [307.090118] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [307.090358] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [307.090604] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [307.090886] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [307.091145] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz

<7> [307.091451] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [307.091800] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [307.092034] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [307.092267] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset]

<7> [307.092529] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no

<7> [307.092782] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [307.093012] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no

<7> [307.093436] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [307.094819] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [307.152944] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [307.303516] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0

<7> [307.305397] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [307.322869] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off

<7> [307.323406] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [307.323726] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [307.324281] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short

<7> [307.324598] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [307.376204] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [307.376167] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [307.377184] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long

<7> [307.377806] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [307.378485] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [307.381866] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A]

<7> [307.381966] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [307.384026] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [307.384285] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [307.385754] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [307.387844] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A]

<7> [307.389038] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B]

<7> [307.390057] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A]

<7> [307.391230] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B]

<7> [307.392210] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C]

<7> [307.393436] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C]

<7> [307.394739] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A]

<7> [307.395948] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B]

<7> [307.396963] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C]

<7> [307.398138] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1]

<7> [307.400244] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [307.402520] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:83:pipe B]

<7> [307.404383] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:108:pipe C]

<7> [307.504020] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [307.505966] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [307.507532] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [307.509536] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [307.514789] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [307.536675] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [307.623579] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:110:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [307.624792] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:109:DDI A/PHY A][CRTC:58:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [307.626047] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000

<7> [307.627731] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [307.629337] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:109:DDI A/PHY A] [CRTC:58:pipe A]

<7> [307.631406] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [307.632945] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [307.634589] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [307.635881] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [307.636976] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [307.638343] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [307.639347] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [307.640395] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [307.641453] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [307.642535] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [307.643679] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [307.645215] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [307.646569] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [307.647881] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [307.649115] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [307.650168] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [307.651230] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [307.652230] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [307.653314] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [307.654371] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [307.655449] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [307.656631] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [307.658168] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [307.659581] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [307.660763] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [307.661910] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [307.662931] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [307.664115] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [307.665169] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [307.666414] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [307.667448] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [307.668798] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [307.669872] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [307.671129] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [307.672204] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [307.673440] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [307.674487] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [307.675706] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [307.676711] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [307.678051] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset

<7> [307.679382] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [307.680711] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [307.682256] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [307.683757] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [307.685270] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [307.686777] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [307.688014] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [307.689579] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [307.691348] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [307.692891] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [307.694412] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [307.695915] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [307.697115] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:58:pipe A] allocated DPLL 0

<7> [307.698371] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:58:pipe A] reserving DPLL 0

<7> [307.699406] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: yes [modeset]

<7> [307.700665] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [307.701684] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [307.702895] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [307.703886] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [307.705069] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [307.706238] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [307.707550] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [307.708562] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [307.709811] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [307.710903] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [307.712069] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [307.713109] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [307.714562] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [307.715592] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [307.716824] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [307.718115] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [307.719346] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [307.720355] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [307.721545] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [307.722552] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [307.723777] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [307.724791] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [307.725963] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [307.726996] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [307.728532] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [307.729883] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [307.731092] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [307.732109] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [307.733333] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [307.734362] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [307.735554] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [307.736597] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [307.737859] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [307.739141] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [307.740348] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [307.741177] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [307.741837] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [307.742599] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [307.743192] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [307.743862] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [307.744621] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [307.745439] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [307.746120] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [307.746789] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:111] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [307.747546] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [307.748136] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [307.748806] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [307.749581] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no

<7> [307.761401] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [307.771610] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [307.771911] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [307.772525] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [307.773222] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [307.773978] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [307.774922] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A]

<7> [307.775233] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B]

<7> [307.775594] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A]

<7> [307.775942] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B]

<7> [307.776225] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C]

<7> [307.776538] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C]

<7> [307.776881] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A]

<7> [307.777141] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B]

<7> [307.777397] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C]

<7> [307.777937] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:58:pipe A]

<7> [307.778205] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [307.778712] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power on

<7> [307.779076] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (99 ms remaining)

<7> [307.887731] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [307.957751] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [307.958948] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power on

<7> [307.959996] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003

<7> [308.008928] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [308.010213] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long

<7> [308.011410] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [308.012666] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [308.164533] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [308.166585] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [308.168615] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [308.171705] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on

<7> [308.173138] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b

<7> [308.181732] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [308.182940] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [308.188688] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [308.190313] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [308.191906] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [308.201069] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Clock recovery OK

<7> [308.202612] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [308.204074] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [308.221124] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [308.222494] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [308.223822] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [308.228802] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [308.230331] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [308.233476] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [308.237414] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [308.238927] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [308.241199] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 37

<7> [308.248746] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 391 us, max time under evasion is 250 us

<7> [308.255804] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [308.264911] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1]

<7> [308.265816] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [308.269888] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [308.270703] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [308.275768] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [308.276958] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [308.277637] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [308.278448] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [308.278929] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [308.278942] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [308.279360] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [308.282876] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [308.282890] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [308.288922] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [308.294443] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [308.295714] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [308.296159] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [308.298754] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [308.299187] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [308.299200] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [308.299745] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [308.306520] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [308.306534] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [308.442118] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [308.442887] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [308.455312] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [308.491783] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [308.492121] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [308.505425] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [308.544094] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [308.545001] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [308.551676] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [308.551978] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [308.552209] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [308.552912] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [308.553313] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [308.553679] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [308.554047] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [308.554523] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [308.554896] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [308.555918] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [308.643574] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [308.644641] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [308.645125] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [308.645594] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<6> [308.650755] Console: switching to colour dummy device 80x25

<7> [308.651125] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:111] is removed

<7> [308.652843] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [308.653688] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [308.654594] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [308.655432] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [308.656215] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [308.658309] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [308.670019] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [308.673724] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [308.674672] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [308.675604] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [308.676507] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [308.677406] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [308.678302] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [308.679169] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [308.680071] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [308.681111] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [308.682181] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [308.683068] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [308.684146] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [308.685203] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [308.686282] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [308.687403] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [308.688476] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [308.689529] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [308.690498] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [308.691479] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [308.692185] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [308.692910] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [308.693770] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [308.694502] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [308.695371] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [308.696027] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [308.696826] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [308.697867] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [308.698768] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [308.699589] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [308.700319] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [308.701122] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [308.701872] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [308.702704] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [308.703432] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [308.704309] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [308.705066] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [308.705782] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [308.706859] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [308.707949] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [308.709014] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset

<7> [308.710087] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0

<7> [308.711947] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [308.712786] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [308.713836] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [308.715004] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [308.716047] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [308.717085] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [308.718138] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset]

<7> [308.718978] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no

<7> [308.719683] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [308.720435] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no

<7> [308.724375] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [308.927526] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0

<7> [308.929746] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [308.940176] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off

<7> [308.940695] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [308.941175] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [308.941748] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short

<7> [308.942186] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [308.993832] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [308.993878] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [308.994984] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long

<7> [308.996367] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A]

<7> [308.996180] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [308.996469] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [308.998053] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [308.999730] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [309.002183] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [309.003136] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A]

<7> [309.005041] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B]

<7> [309.006306] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A]

<7> [309.008024] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B]

<7> [309.009476] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C]

<7> [309.010942] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C]

<7> [309.012110] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A]

<7> [309.013523] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B]

<7> [309.014733] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C]

<7> [309.016119] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1]

<7> [309.018798] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [309.089307] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [309.147453] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:110:eDP-1] removing connector from sysfs

<7> [309.166944] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:118:DP-1] removing connector from sysfs

<7> [309.173836] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:127:HDMI-A-1] removing connector from sysfs

<7> [309.186763] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:133:DP-2] removing connector from sysfs

<7> [309.189582] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:139:HDMI-A-2] removing connector from sysfs

<7> [309.217378] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (278 ms remaining)

<7> [309.503976] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [309.566294] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<6> [310.134035] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS

<6> [310.135220] [IGT] i915_pm_rpm: exiting, ret=0

Results for igt@i915_pm_rpm@module-reload