igt@i915_pm_rpm@module-reload on fi-skl-6600u@IGT

Detail	Value
Duration	12.70 seconds
Igt-Version	IGT-Version: 2.3-ga26a2808e (x86_64) (Linux: 6.19.0-CI_DRM_17976-g2938ce73d013+ x86_64)
Out	Using IGT_SRANDOM=1770818918 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff888112c99820 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] hsw_get_pipe_config+0x1b9/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x740 [i915] intel_atomic_commit_tail+0x12e0/0x1d70 [i915] intel_atomic_commit+0x2e8/0x330 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x407/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 __x64_sys_ioctl+0xa5/0x100 Starting subtest: module-reload Reloading i915 with disable_display=1 mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 2 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff88813a0c5820 has 1/2 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get+0x1a/0x30 [i915] intel_display_rpm_get+0x1f/0x30 [i915] intel_display_power_get+0x22/0x70 [i915] intel_audio_component_get_power+0x2f/0x180 [i915] snd_hdac_display_power+0x8a/0x1c0 [snd_hda_core] azx_probe_continue+0x24f/0x9f0 [snd_hda_intel] azx_probe_work+0x15/0x20 [snd_hda_intel] process_one_work+0x22e/0x6b0 worker_thread+0x1e8/0x3d0 kthread+0x11f/0x250 ret_from_fork+0x344/0x3a0 ret_from_fork_asm+0x1a/0x30 ref_tracker: intel_runtime_pm@ffff88813a0c5820 has 1/2 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get+0x1a/0x30 [i915] intel_display_rpm_get+0x1f/0x30 [i915] intel_display_power_get+0x22/0x70 [i915] intel_pps_vdd_on_unlocked+0xbd/0x360 [i915] intel_dp_aux_xfer+0x12b/0x960 [i915] intel_dp_aux_transfer+0xd4/0x330 [i915] drm_dp_dpcd_access+0xc3/0x160 [drm_display_helper] drm_dp_dpcd_read+0x87/0x160 [drm_display_helper] intel_alpm_init+0x39/0x90 [i915] intel_dp_init_connector+0x9c4/0x14e0 [i915] intel_ddi_init+0xd03/0x1220 [i915] intel_bios_for_each_encoder+0x39/0x60 [i915] intel_setup_outputs+0x1f4/0xc20 [i915] intel_display_driver_probe_nogem+0x110/0x1e0 [i915] Reloading i915 with mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff888213a75820 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] hsw_get_pipe_config+0x1b9/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x740 [i915] intel_atomic_commit_tail+0x12e0/0x1d70 [i915] intel_atomic_commit+0x2e8/0x330 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x407/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 __x64_sys_ioctl+0xa5/0x100 Subtest module-reload: SUCCESS (12.697s)
Err	Starting subtest: module-reload Subtest module-reload: SUCCESS (12.697s)
Dmesg	<6> [281.488553] Console: switching to colour dummy device 80x25 <6> [281.489783] [IGT] i915_pm_rpm: executing <7> [281.494170] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [281.494973] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [281.494992] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [281.495597] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [281.495870] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [281.496108] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [281.496480] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [281.496493] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [281.496501] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [281.496535] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no <7> [281.496835] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [281.497060] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [281.499064] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes: <7> [281.499075] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [281.499083] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [281.499180] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [281.499189] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [281.503623] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [281.503713] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [281.503722] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [281.504470] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [281.504762] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [281.505178] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [281.505512] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [281.505524] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [281.505785] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [281.508812] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [281.508821] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [281.509093] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [281.509219] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [281.509231] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [281.513640] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [281.513768] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [281.513780] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [281.514442] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [281.514819] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [281.515371] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [281.515761] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [281.515771] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [281.516114] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [281.519397] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [281.519408] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [281.519825] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [281.528894] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [281.528906] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [281.533264] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [281.533900] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [281.533909] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [281.534425] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [281.534807] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [281.535357] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [281.535753] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [281.535763] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [281.536110] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [281.539362] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [281.539372] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [281.539797] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [281.540767] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [281.540781] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [281.545281] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [281.545902] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [281.545910] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [281.546410] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [281.546760] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [281.547293] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [281.547666] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [281.547676] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [281.548015] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [281.551238] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [281.551248] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [281.551637] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [281.552389] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [281.552402] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [281.552827] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [281.553192] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [281.553556] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [281.553962] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [281.553973] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [281.553981] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [281.554020] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no <7> [281.554382] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [281.554740] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [281.556022] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes: <7> [281.556035] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [281.556046] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [281.556087] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [281.556095] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [281.560558] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [281.560590] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [281.560598] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [281.561099] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [281.561378] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [281.561798] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [281.562036] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [281.562044] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [281.562282] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [281.565290] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [281.565298] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [281.565535] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [281.565566] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [281.565574] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [281.569881] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [281.569911] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [281.569919] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [281.570428] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [281.570679] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [281.571085] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [281.571364] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [281.571374] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [281.571646] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [281.574650] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [281.574658] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [281.574913] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [281.575534] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:144] <7> [281.929308] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [282.618832] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:58:pipe A] <7> [282.619585] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [282.620658] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [282.620923] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [282.621184] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [282.621477] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [282.621767] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [282.622018] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [282.622291] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [282.622573] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [282.622815] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [282.623056] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [282.623313] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [282.623576] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [282.623817] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [282.624057] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [282.624348] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [282.624599] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [282.624840] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [282.625080] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [282.625342] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [282.625602] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [282.625842] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [282.626081] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [282.626338] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [282.626596] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [282.626929] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [282.627189] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [282.627469] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [282.627791] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [282.628054] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [282.628340] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [282.628670] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [282.628913] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [282.629154] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [282.629465] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [282.629850] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [282.630244] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [282.630614] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [282.630987] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [282.631381] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset <7> [282.631765] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0 <7> [282.632185] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [282.632492] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [282.632771] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [282.633029] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [282.633340] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [282.633642] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [282.633906] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [282.634286] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [282.634598] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz <7> [282.634916] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [282.635178] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [282.635469] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [282.635753] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset] <7> [282.636019] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no <7> [282.636318] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [282.636600] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no <7> [282.637041] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [282.638680] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [282.847791] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0 <7> [282.848710] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [282.861195] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off <7> [282.861481] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time <7> [282.861743] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [282.861836] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [282.862296] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short <7> [282.914532] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [282.915051] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long <7> [282.915563] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [282.918266] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [282.919175] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [282.920189] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [282.920396] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A] <7> [282.920933] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [282.921566] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [282.922504] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [282.924398] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A] <7> [282.925334] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B] <7> [282.926141] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A] <7> [282.926990] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B] <7> [282.927815] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C] <7> [282.928647] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C] <7> [282.929468] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A] <7> [282.930280] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B] <7> [282.931084] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C] <7> [282.931899] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1] <7> [282.933468] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [282.935670] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:83:pipe B] <7> [282.936502] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:108:pipe C] <7> [283.036985] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [283.039061] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [283.040163] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [283.042162] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [283.045101] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [283.066345] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [283.148509] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:110:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [283.149677] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:109:DDI A/PHY A][CRTC:58:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [283.150837] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000 <7> [283.152404] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [283.154650] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:109:DDI A/PHY A] [CRTC:58:pipe A] <7> [283.156267] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [283.157670] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [283.159574] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [283.161399] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [283.163006] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [283.164632] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [283.166254] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [283.167807] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [283.169370] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [283.170840] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [283.172419] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [283.173984] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [283.175587] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [283.177030] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [283.178488] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [283.179891] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [283.181460] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [283.183016] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [283.184450] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [283.185509] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [283.186969] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [283.188511] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [283.189869] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [283.191253] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [283.192593] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [283.193899] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [283.195112] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [283.196448] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [283.197813] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [283.199150] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [283.200506] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [283.201846] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [283.203020] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [283.204154] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [283.205093] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [283.206154] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [283.207085] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [283.208164] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [283.209048] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [283.210084] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset <7> [283.211204] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [283.212298] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [283.213112] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [283.214148] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [283.215461] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [283.216777] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [283.218071] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [283.219651] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [283.221136] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [283.222065] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [283.223355] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [283.224711] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [283.226041] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:58:pipe A] allocated DPLL 0 <7> [283.227436] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:58:pipe A] reserving DPLL 0 <7> [283.228791] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: yes [modeset] <7> [283.229698] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [283.230900] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [283.232285] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [283.233623] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [283.234953] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [283.236277] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [283.237560] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [283.238699] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [283.240043] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [283.241369] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [283.242700] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [283.244026] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [283.245368] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [283.246588] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [283.247765] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [283.249060] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [283.250411] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [283.251742] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [283.253066] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [283.254117] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [283.254973] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [283.255670] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [283.256451] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [283.257340] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [283.258195] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [283.259087] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [283.259979] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [283.260751] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [283.261518] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [283.262098] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [283.262656] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [283.263154] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [283.263606] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [283.264098] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [283.264559] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [283.265044] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [283.265494] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [283.266041] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [283.266569] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [283.267062] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [283.267522] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [283.268014] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [283.268480] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [283.268974] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:111] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [283.269422] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [283.269913] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [283.270367] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [283.270907] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no <7> [283.283317] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [283.294877] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [283.295133] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [283.295485] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [283.296138] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [283.296813] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [283.297601] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A] <7> [283.297853] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B] <7> [283.298122] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A] <7> [283.298504] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B] <7> [283.298837] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C] <7> [283.299155] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C] <7> [283.299479] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A] <7> [283.299806] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B] <7> [283.300105] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C] <7> [283.300529] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:58:pipe A] <7> [283.300756] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [283.301243] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power on <7> [283.301700] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (118 ms remaining) <7> [283.428653] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [283.448407] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [283.449142] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power on <7> [283.449962] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003 <7> [283.499529] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [283.500515] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long <7> [283.501489] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [283.502405] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [283.652182] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [283.653620] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [283.654920] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [283.658485] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on <7> [283.660199] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b <7> [283.666800] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [283.668051] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [283.671799] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [283.673364] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [283.674880] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [283.678616] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Clock recovery OK <7> [283.679815] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [283.681181] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [283.686098] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [283.687112] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [283.688420] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [283.691894] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [283.692912] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [283.694875] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [283.697491] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [283.698650] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [283.700184] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 37 <7> [283.713327] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [283.718914] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1] <7> [283.720409] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [283.725049] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [283.725948] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [283.731016] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [283.733027] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [283.734489] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <6> [283.735139] [IGT] i915_pm_rpm: starting subtest module-reload <7> [283.736864] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [283.738521] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [283.738565] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [283.740244] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [283.747272] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [283.747321] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [283.748955] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [283.755120] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [283.757173] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [283.758683] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [283.760610] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [283.762184] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [283.762295] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [283.764011] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [283.770169] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [283.770244] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [283.883855] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [283.884717] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [283.898209] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [283.923924] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [283.924410] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [283.937378] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [283.986197] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [283.988741] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [284.002454] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [284.003176] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [284.004023] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [284.007340] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [284.007992] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [284.008711] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [284.009399] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [284.010039] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [284.011969] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [284.014050] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [284.130121] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [284.130966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [284.131355] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [284.131806] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [284.134166] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:111] is removed <7> [284.134353] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [284.134920] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [284.135514] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [284.136045] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [284.136624] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [284.137479] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [284.146829] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [284.147656] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [284.148207] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [284.148717] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [284.149419] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [284.150080] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [284.150761] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [284.151440] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [284.152090] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [284.152765] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [284.153530] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [284.154187] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [284.155010] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [284.155696] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [284.156372] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [284.157030] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [284.157703] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [284.158390] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [284.159041] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [284.159713] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [284.160452] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [284.161109] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [284.161795] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [284.162466] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [284.163123] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [284.163796] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [284.164455] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [284.165110] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [284.165779] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [284.166471] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [284.167121] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [284.167795] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [284.168458] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [284.169112] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [284.169798] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [284.170471] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [284.171127] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [284.171803] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [284.172479] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [284.173137] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [284.173813] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset <7> [284.174448] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0 <7> [284.177350] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [284.178119] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [284.178947] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [284.179613] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [284.180271] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [284.180919] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [284.181588] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset] <7> [284.182275] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no <7> [284.182933] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [284.183629] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no <7> [284.185125] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [284.388525] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0 <7> [284.390601] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [284.399929] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off <7> [284.400461] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [284.400966] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time <7> [284.401451] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short <7> [284.401852] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [284.453534] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [284.453985] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [284.454673] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long <7> [284.455831] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [284.457748] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [284.458356] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A] <7> [284.459202] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [284.460437] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [284.462122] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [284.465355] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A] <7> [284.467156] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B] <7> [284.468716] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A] <7> [284.470157] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B] <7> [284.471722] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C] <7> [284.473295] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C] <7> [284.474842] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A] <7> [284.476400] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B] <7> [284.477847] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C] <7> [284.479355] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1] <7> [284.482473] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [284.551916] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [284.594285] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:110:eDP-1] removing connector from sysfs <7> [284.617921] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:118:DP-1] removing connector from sysfs <7> [284.624957] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:127:HDMI-A-1] removing connector from sysfs <7> [284.644987] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:133:DP-2] removing connector from sysfs <7> [284.651158] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:139:HDMI-A-2] removing connector from sysfs <7> [284.671683] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (284 ms remaining) <7> [284.964837] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [285.058512] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [285.677299] [IGT] Reloading i915 w/o display <5> [286.515092] Setting dangerous option force_probe - tainting kernel <6> [286.527426] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0 <7> [286.529145] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K <7> [286.529718] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [286.529996] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH <7> [286.530271] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [286.530632] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [286.531234] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [286.531593] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [286.532811] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [286.533038] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [286.533258] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [286.533481] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [286.533494] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [286.534274] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [286.534328] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [286.534698] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [286.535056] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7716 MiB [mem 0x00000000-0x1e24e0fff], io: n/a <7> [286.535384] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a <7> [286.536041] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018 <7> [286.536399] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [286.536774] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [286.537147] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [286.537538] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [286.546276] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [286.546558] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [286.546806] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [286.547053] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [286.547347] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [286.547737] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [286.548125] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no <7> [286.548539] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [286.548923] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [286.549196] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no <7> [286.549515] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes <7> [286.549804] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no <7> [286.550189] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3 <7> [286.550590] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [286.550977] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0 <7> [286.551373] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7> [286.552285] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [286.552586] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203 <7> [286.552882] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [286.553143] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [286.553421] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [286.553727] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [286.553988] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 850) <7> [286.554268] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [286.554562] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [286.554824] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [286.555083] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [286.556265] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136) <7> [286.556656] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [286.557018] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [286.557292] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [286.557600] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [286.557967] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [286.558389] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [286.558768] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [286.559151] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [286.559539] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [286.559846] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [286.560095] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [286.560370] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [286.560676] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [286.560950] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [286.561304] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [286.561632] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [286.561894] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [286.562150] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [286.562420] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [286.562752] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [286.563104] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [286.563403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [286.563707] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [286.563977] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [286.564325] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [286.564606] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [286.564864] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [286.565177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [286.566031] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <7> [286.567096] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [286.567420] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [286.567733] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [286.567998] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <6> [286.568685] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [286.569302] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [286.569901] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [286.570332] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [286.570640] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7> [286.570901] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec) <7> [286.571151] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec) <7> [286.571429] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec) <7> [286.571728] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec) <7> [286.571978] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec) <7> [286.572239] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec) <7> [286.572544] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec) <7> [286.572808] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec) <7> [286.573100] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec) <7> [286.573374] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec) <7> [286.573655] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec) <7> [286.573903] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec) <7> [286.574151] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec) <7> [286.574453] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec) <7> [286.574753] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec) <7> [286.578680] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available. <7> [286.582452] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [286.582909] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:109:DDI A/PHY A] Using AUX CH A (VBT) <7> [286.583353] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:109:DDI A/PHY A] <7> [286.591048] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [286.591575] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [286.591971] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [286.592390] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [286.594369] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [286.594787] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [286.595186] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP <7> [286.595778] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [286.596168] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0 <7> [286.596585] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0 <7> [286.597494] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:109:DDI A/PHY A] initial power sequencer: PPS 0 <7> [286.597933] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [286.598331] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [286.598694] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [286.599071] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [286.599452] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [286.599871] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [286.600730] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on <7> [286.601144] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [286.601580] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [286.612251] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [286.612564] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [286.612810] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [286.822168] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [286.823049] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [286.825989] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00 <7> [286.829831] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [286.846875] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [286.846920] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [286.846949] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [286.847477] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [286.848995] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [286.850819] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:110:eDP-1] DRRS type: static <7> [286.852788] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:110:eDP-1] Using native PCH PWM for backlight control <7> [286.854308] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:110:eDP-1] backlight initialized, disabled, brightness 0/937 <7> [286.856620] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [286.858045] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [286.859348] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [286.860777] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [286.862527] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [286.864067] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [286.866965] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:117:DDI B/PHY B] Using AUX CH B (VBT) <7> [286.868480] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:117:DDI B/PHY B] <7> [286.873369] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [286.874846] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:117:DDI B/PHY B] <7> [286.876125] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:117:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [286.879872] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:132:DDI C/PHY C] Using AUX CH C (VBT) <7> [286.881768] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:132:DDI C/PHY C] <7> [286.885854] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [286.887595] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:132:DDI C/PHY C] <7> [286.888937] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:132:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [286.893772] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled <6> [286.895821] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem <7> [286.897311] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] hw state readout: disabled <7> [286.899790] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] hw state readout: disabled <7> [286.901894] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] hw state readout: disabled <7> [286.903487] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] hw state readout: disabled, pipe A <7> [286.905198] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A <7> [286.906821] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] hw state readout: disabled, pipe A <7> [286.908612] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] hw state readout: disabled, pipe B <7> [286.910516] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] hw state readout: disabled, pipe B <7> [286.912130] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] hw state readout: disabled, pipe B <7> [286.913715] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] hw state readout: disabled, pipe C <7> [286.915380] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] hw state readout: disabled, pipe C <7> [286.916927] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] hw state readout: disabled, pipe C <7> [286.918587] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DDI A/PHY A] hw state readout: disabled, pipe A <7> [286.920084] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DDI B/PHY B] hw state readout: disabled, pipe A <7> [286.921754] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST A] hw state readout: disabled, pipe A <7> [286.923375] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST B] hw state readout: disabled, pipe B <7> [286.924745] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST C] hw state readout: disabled, pipe C <7> [286.926403] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:132:DDI C/PHY C] hw state readout: disabled, pipe A <7> [286.927805] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST A] hw state readout: disabled, pipe A <7> [286.929283] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST B] hw state readout: disabled, pipe B <7> [286.930696] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST C] hw state readout: disabled, pipe C <7> [286.932285] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [286.934319] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [286.935403] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [286.936387] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [286.937535] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:110:eDP-1] hw state readout: disabled <7> [286.938538] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:118:DP-1] hw state readout: disabled <7> [286.939586] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:127:HDMI-A-1] hw state readout: disabled <7> [286.940550] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:133:DP-2] hw state readout: disabled <7> [286.941916] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:139:HDMI-A-2] hw state readout: disabled <7> [286.942786] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] min_cdclk 0 kHz <7> [286.943597] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] min_cdclk 0 kHz <7> [286.944187] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] min_cdclk 0 kHz <7> [286.944807] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] min_cdclk 0 kHz <7> [286.945413] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] min_cdclk 0 kHz <7> [286.945957] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] min_cdclk 0 kHz <7> [286.946533] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] min_cdclk 0 kHz <7> [286.947272] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] min_cdclk 0 kHz <7> [286.947877] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] min_cdclk 0 kHz <7> [286.948494] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] min_cdclk 0 kHz <7> [286.949074] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] min_cdclk 0 kHz <7> [286.949660] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] min_cdclk 0 kHz <7> [286.950259] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:58:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [286.950796] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:83:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [286.951377] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:108:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [286.952482] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [setup_hw_state] <7> [286.952945] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [setup_hw_state] <7> [286.953493] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [setup_hw_state] <7> [286.954137] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [286.954925] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [286.955491] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [286.956062] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [286.956604] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7> [286.960420] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [286.960855] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [286.961508] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0 <7> [286.985757] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [286.986009] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [286.986242] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [286.986553] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [286.986878] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 0: start 0x8 <7> [286.987279] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 1: start 0x108 <7> [286.987663] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 2: start 0x208 <7> [286.988017] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 3: start 0x308 <7> [286.988286] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 4: start 0x3c8 <7> [286.988583] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 0: start 0x8 <7> [286.988907] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 1: start 0x108 <7> [286.989391] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 2: start 0x208 <7> [286.989779] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 3: start 0x308 <7> [286.990160] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 4: start 0x3c8 <7> [286.990555] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 0: start 0x8 <7> [286.990905] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 1: start 0x108 <7> [286.991176] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 2: start 0x208 <7> [286.991490] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 3: start 0x308 <7> [286.991792] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 4: start 0x3c8 <7> [286.992291] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [fastset] <7> [286.992621] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [fastset] <7> [286.992868] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [fastset] <7> [286.993339] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [286.994032] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:83:pipe B] <7> [286.994497] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:108:pipe C] <7> [286.994898] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [286.999613] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:110:eDP-1] adding connector to sysfs <7> [287.000753] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:110:eDP-1] backlight device intel_backlight registered <7> [287.001219] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:110:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [287.002161] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [287.004827] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:110:eDP-1] generating connector hotplug event <7> [287.004931] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:118:DP-1] adding connector to sysfs <7> [287.006039] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [287.008064] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:118:DP-1] generating connector hotplug event <7> [287.008208] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:127:HDMI-A-1] adding connector to sysfs <7> [287.009377] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:127:HDMI-A-1] generating connector hotplug event <7> [287.009477] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:133:DP-2] adding connector to sysfs <7> [287.010800] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [287.014761] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:133:DP-2] generating connector hotplug event <7> [287.014924] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:139:HDMI-A-2] adding connector to sysfs <7> [287.017831] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:139:HDMI-A-2] generating connector hotplug event <6> [287.017962] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7> [287.024766] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [287.057164] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [287.067418] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input35 <7> [287.069166] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [287.073957] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [287.074412] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:118:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [287.074700] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [287.074960] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:127:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [287.075309] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [287.075710] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:133:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [287.076132] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [287.076543] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:139:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [287.076952] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [287.077519] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:58:pipe A] not active, skipping <7> [287.077952] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:83:pipe B] not active, skipping <7> [287.078390] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:108:pipe C] not active, skipping <7> [287.078787] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config <7> [287.080732] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [287.081785] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [287.081949] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [287.081965] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [287.082426] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] status updated from unknown to disconnected <7> [287.082446] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] disconnected <7> [287.082468] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [287.082596] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:110:eDP-1] EDID changed, epoch counter 2 <7> [287.082625] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [287.082637] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [287.083047] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [287.083059] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [287.083071] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [287.083485] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [287.083498] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [287.083509] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [287.083913] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [287.083926] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [287.083937] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [287.084354] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [287.084366] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [287.084375] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? no <7> [287.084384] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no <7> [287.084392] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no <7> [287.084401] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no <7> [287.084410] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no <7> [287.084469] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [287.084491] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [287.084596] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [287.084612] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [287.087336] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9 <7> [287.087814] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0 <7> [287.088279] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7> [287.088690] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no <7> [287.089114] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no <7> [287.089539] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7> [287.089943] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7> [287.090379] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no <7> [287.090786] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7> [287.091205] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7> [287.091662] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7> [287.092080] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7> [287.092533] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7> [287.092962] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7> [287.093419] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7> [287.093832] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes <7> [287.094278] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7> [287.094689] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7> [287.095108] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7> [287.095536] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7> [287.095953] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no <7> [287.096378] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz <7> [287.096980] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [287.097125] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [287.097142] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [287.097571] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] disconnected <7> [287.097588] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [287.097599] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [287.098009] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [287.098022] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [287.098034] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [287.098455] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [287.098469] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [287.098480] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [287.098888] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [287.098901] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [287.098912] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [287.099323] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [287.099338] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [287.099347] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? no <7> [287.099357] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no <7> [287.099366] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no <7> [287.099375] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no <7> [287.099384] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no <7> [287.099448] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [287.099468] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [287.099311] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7> [287.099569] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [287.099599] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [287.099771] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [287.099741] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [287.100093] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [287.101083] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [287.101617] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [287.101905] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [287.102718] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9 <7> [287.102936] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9 <7> [287.103131] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9 <7> [287.103404] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0 <7> [287.103720] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0 <7> [287.103914] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2 <7> [287.104106] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21 <7> [287.104319] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000 <7> [287.104584] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE <7> [287.104776] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7> [287.104968] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7> [287.105159] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39 <7> [287.105368] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7> [287.105625] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7> [287.105817] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7> [287.106009] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7> [287.106200] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7> [287.106423] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7> [287.106693] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7> [287.106886] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7> [287.107077] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7> [287.107303] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no <7> [287.107555] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no <7> [287.107749] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7> [287.107941] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7> [287.108244] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7> [287.108560] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no <7> [287.108867] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no <7> [287.109176] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7> [287.109519] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7> [287.109837] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes <7> [287.110156] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7> [287.110493] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no <7> [287.110811] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7> [287.111128] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7> [287.111466] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no <7> [287.111790] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no <7> [287.112114] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no <7> [287.112441] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7> [287.112758] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no <7> [287.113079] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7> [287.113413] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7> [287.113731] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7> [287.114047] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7> [287.114382] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no <7> [287.114701] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes <7> [287.115015] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7> [287.115348] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7> [287.115653] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7> [287.115963] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7> [287.116296] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7> [287.116614] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403 <7> [287.116936] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001 <7> [287.117280] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3 <7> [287.117602] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007 <7> [287.117923] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000 <7> [287.118268] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000 <7> [287.118595] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24 <7> [287.118907] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8 <7> [287.119217] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7> [287.119556] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7> [287.119878] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes <6> [287.120198] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [287.120202] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [287.120207] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [287.144583] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6> [287.145432] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7> [287.146006] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [287.146836] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [287.149072] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [287.177455] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [287.177735] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [287.177965] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [287.178193] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [287.178468] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [287.178811] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [287.179168] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [287.179684] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [287.180086] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <6> [287.204794] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36 <6> [287.208148] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input37 <6> [287.215779] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input38 <7> [288.482710] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [289.374911] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD off <7> [289.375259] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [289.375648] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [289.376253] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [289.376666] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [289.377505] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [289.377643] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [289.377785] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long <7> [289.378065] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [289.378407] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [289.378753] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [289.384382] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [289.457866] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [289.484435] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [289.493872] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [289.494466] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [289.495145] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [289.495788] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [289.496440] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [289.497034] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [289.497667] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [289.498862] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [289.499805] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [289.502397] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [289.515394] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [289.515930] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [289.516417] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [289.517039] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [289.518097] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [289.642753] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [289.643144] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [289.644327] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [289.644961] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [289.645606] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [289.652493] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [289.652747] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [289.652962] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [289.653173] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [289.653595] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [289.653941] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [289.654297] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [289.654635] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [289.654978] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [289.656409] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [289.657105] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [289.657508] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [289.657867] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [289.658627] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [289.742070] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [289.742622] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [289.743550] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [289.744594] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [289.745648] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [289.746466] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [289.747161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [289.747710] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [289.748341] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [289.791749] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [289.812965] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:110:eDP-1] removing connector from sysfs <7> [289.820941] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:118:DP-1] removing connector from sysfs <7> [289.822851] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:127:HDMI-A-1] removing connector from sysfs <7> [289.833327] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:133:DP-2] removing connector from sysfs <7> [289.840546] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:139:HDMI-A-2] removing connector from sysfs <7> [289.865478] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (11 ms remaining) <7> [289.879400] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [289.889409] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [290.339302] [IGT] Reloading i915 as normal <5> [291.200592] Setting dangerous option force_probe - tainting kernel <6> [291.212978] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0 <7> [291.214805] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K <7> [291.215200] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [291.215505] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH <7> [291.215914] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [291.216380] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [291.216963] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [291.217331] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [291.218655] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [291.219021] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [291.219387] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [291.219711] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [291.219725] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [291.220638] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [291.220696] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [291.221084] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [291.221476] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7716 MiB [mem 0x00000000-0x1e24e0fff], io: n/a <7> [291.221798] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a <7> [291.222674] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018 <7> [291.223161] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [291.223572] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [291.223956] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [291.224353] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [291.231268] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [291.231626] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [291.231874] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [291.232121] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [291.232414] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [291.232728] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [291.232985] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no <7> [291.233261] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [291.233567] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [291.233824] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no <7> [291.234078] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes <7> [291.234395] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no <7> [291.234693] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3 <7> [291.234949] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [291.235221] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0 <7> [291.235616] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7> [291.236790] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [291.237225] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203 <7> [291.237647] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [291.238058] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [291.238481] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [291.238890] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [291.239310] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 850) <7> [291.239719] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [291.240128] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [291.240551] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [291.240961] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [291.241375] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136) <7> [291.241772] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [291.242169] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [291.242573] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [291.242990] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [291.243407] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [291.243812] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [291.244207] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [291.244677] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [291.245073] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [291.245478] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [291.245877] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [291.246293] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [291.246703] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [291.247130] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [291.247651] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [291.248088] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [291.248505] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [291.248907] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [291.249311] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [291.249706] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [291.250231] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [291.250646] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [291.251051] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [291.251485] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [291.251984] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [291.252399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [291.252806] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [291.253209] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [291.254441] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <7> [291.256686] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [291.257149] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [291.257576] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [291.257992] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [291.258886] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [291.259742] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [291.260296] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [291.260708] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7> [291.261112] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec) <7> [291.261527] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec) <7> [291.261932] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec) <7> [291.262349] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec) <7> [291.262752] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec) <7> [291.263151] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec) <7> [291.263583] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec) <7> [291.263986] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec) <7> [291.264401] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec) <7> [291.264801] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec) <7> [291.265200] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec) <7> [291.265611] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec) <7> [291.266010] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec) <7> [291.266419] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec) <7> [291.266822] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec) <6> [291.267655] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [291.273331] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available. <7> [291.277231] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [291.277752] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:109:DDI A/PHY A] Using AUX CH A (VBT) <7> [291.278191] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:109:DDI A/PHY A] <7> [291.286265] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [291.286705] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [291.287100] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [291.287523] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [291.287934] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [291.288362] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [291.288773] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP <7> [291.289179] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [291.289596] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0 <7> [291.290008] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0 <7> [291.290695] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:109:DDI A/PHY A] initial power sequencer: PPS 0 <7> [291.291142] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [291.291535] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [291.291921] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [291.292318] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [291.292699] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [291.293130] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [291.293996] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on <7> [291.294450] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [291.294887] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [291.305423] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [291.305746] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [291.306000] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [291.509979] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [291.513499] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [291.515355] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00 <7> [291.518825] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [291.536461] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [291.536502] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [291.536526] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [291.536945] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [291.538402] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [291.540238] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:110:eDP-1] DRRS type: static <7> [291.542405] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:110:eDP-1] Using native PCH PWM for backlight control <7> [291.544129] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:110:eDP-1] backlight initialized, disabled, brightness 0/937 <7> [291.546431] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [291.547740] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [291.549626] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [291.551497] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [291.553120] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [291.554773] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [291.557748] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:117:DDI B/PHY B] Using AUX CH B (VBT) <7> [291.559600] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:117:DDI B/PHY B] <7> [291.564963] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [291.566357] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:117:DDI B/PHY B] <7> [291.567968] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:117:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [291.571745] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:132:DDI C/PHY C] Using AUX CH C (VBT) <7> [291.573584] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:132:DDI C/PHY C] <7> [291.577356] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [291.579199] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:132:DDI C/PHY C] <7> [291.580827] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:132:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [291.584801] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled <6> [291.586032] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem <7> [291.587216] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] hw state readout: disabled <7> [291.589826] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] hw state readout: disabled <7> [291.592356] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] hw state readout: disabled <7> [291.594153] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] hw state readout: disabled, pipe A <7> [291.595600] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A <7> [291.597565] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] hw state readout: disabled, pipe A <7> [291.599477] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] hw state readout: disabled, pipe B <7> [291.601448] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] hw state readout: disabled, pipe B <7> [291.603302] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] hw state readout: disabled, pipe B <7> [291.604779] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] hw state readout: disabled, pipe C <7> [291.606693] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] hw state readout: disabled, pipe C <7> [291.608570] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] hw state readout: disabled, pipe C <7> [291.610503] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DDI A/PHY A] hw state readout: disabled, pipe A <7> [291.612130] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DDI B/PHY B] hw state readout: disabled, pipe A <7> [291.613615] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST A] hw state readout: disabled, pipe A <7> [291.615325] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST B] hw state readout: disabled, pipe B <7> [291.617046] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST C] hw state readout: disabled, pipe C <7> [291.619036] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:132:DDI C/PHY C] hw state readout: disabled, pipe A <7> [291.620674] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST A] hw state readout: disabled, pipe A <7> [291.622048] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST B] hw state readout: disabled, pipe B <7> [291.623274] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST C] hw state readout: disabled, pipe C <7> [291.624821] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [291.626208] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [291.627684] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [291.628889] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [291.630088] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:110:eDP-1] hw state readout: disabled <7> [291.631283] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:118:DP-1] hw state readout: disabled <7> [291.632186] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:127:HDMI-A-1] hw state readout: disabled <7> [291.633149] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:133:DP-2] hw state readout: disabled <7> [291.634104] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:139:HDMI-A-2] hw state readout: disabled <7> [291.634855] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] min_cdclk 0 kHz <7> [291.635705] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] min_cdclk 0 kHz <7> [291.636622] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] min_cdclk 0 kHz <7> [291.637492] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] min_cdclk 0 kHz <7> [291.638044] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] min_cdclk 0 kHz <7> [291.638579] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] min_cdclk 0 kHz <7> [291.639205] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] min_cdclk 0 kHz <7> [291.639791] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] min_cdclk 0 kHz <7> [291.640418] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] min_cdclk 0 kHz <7> [291.640941] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] min_cdclk 0 kHz <7> [291.641608] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] min_cdclk 0 kHz <7> [291.642188] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] min_cdclk 0 kHz <7> [291.642731] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:58:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [291.643358] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:83:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [291.643860] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:108:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [291.644843] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [setup_hw_state] <7> [291.645405] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [setup_hw_state] <7> [291.645980] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [setup_hw_state] <7> [291.646673] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [291.647233] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [291.647581] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [291.648003] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [291.648455] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7> [291.651618] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [291.652027] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [291.652484] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0 <7> [291.677136] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [291.677414] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [291.677607] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [291.677797] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [291.677989] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 0: start 0x8 <7> [291.678240] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 1: start 0x108 <7> [291.678545] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 2: start 0x208 <7> [291.678889] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 3: start 0x308 <7> [291.679281] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 4: start 0x3c8 <7> [291.679655] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 0: start 0x8 <7> [291.680000] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 1: start 0x108 <7> [291.680393] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 2: start 0x208 <7> [291.680776] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 3: start 0x308 <7> [291.681118] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 4: start 0x3c8 <7> [291.681395] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 0: start 0x8 <7> [291.681684] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 1: start 0x108 <7> [291.681941] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 2: start 0x208 <7> [291.682198] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 3: start 0x308 <7> [291.682507] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 4: start 0x3c8 <7> [291.682993] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [fastset] <7> [291.683271] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [fastset] <7> [291.683572] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [fastset] <7> [291.684098] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [291.684741] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:83:pipe B] <7> [291.685142] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:108:pipe C] <7> [291.685572] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [291.691547] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:110:eDP-1] adding connector to sysfs <7> [291.694174] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:110:eDP-1] backlight device intel_backlight registered <7> [291.694736] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:110:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [291.695738] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [291.698173] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:110:eDP-1] generating connector hotplug event <7> [291.698386] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:118:DP-1] adding connector to sysfs <7> [291.699975] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [291.702134] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:118:DP-1] generating connector hotplug event <7> [291.702277] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:127:HDMI-A-1] adding connector to sysfs <7> [291.703278] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:127:HDMI-A-1] generating connector hotplug event <7> [291.703392] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:133:DP-2] adding connector to sysfs <7> [291.704610] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [291.707061] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:133:DP-2] generating connector hotplug event <7> [291.707208] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:139:HDMI-A-2] adding connector to sysfs <7> [291.708412] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:139:HDMI-A-2] generating connector hotplug event <6> [291.708530] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7> [291.714274] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [291.747367] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [291.756960] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input39 <7> [291.759449] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [291.764576] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [291.765859] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:58:pipe A] not active, skipping <7> [291.766325] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:83:pipe B] not active, skipping <7> [291.766719] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:108:pipe C] not active, skipping <7> [291.767118] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config <7> [291.768165] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [291.769292] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:118:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [291.769731] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [291.770806] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [291.771226] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [291.771835] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [291.772969] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [291.773182] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [291.773194] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [291.773653] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [291.777032] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [291.777046] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [291.777549] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:127:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [291.777966] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [291.782544] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:133:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [291.782980] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [291.783672] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [291.784064] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [291.784680] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [291.785107] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [291.785119] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [291.785518] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [291.788818] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [291.788833] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [291.789336] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:139:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [291.790371] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [291.790382] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [291.790400] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [291.791131] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [291.791562] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [291.791958] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [291.793334] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [291.793350] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [291.793360] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [291.793408] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no <7> [291.793849] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [291.794289] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [291.796368] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] status updated from unknown to connected <7> [291.796407] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [291.796914] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes: <7> [291.796927] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [291.796940] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [291.796953] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [291.796966] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [291.801778] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [291.801799] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [291.801812] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [291.803032] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [291.803502] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [291.804940] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [291.805449] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [291.805462] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [291.805867] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [291.809467] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [291.809481] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [291.809946] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [291.809962] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [291.809975] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [291.814725] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [291.814743] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [291.814755] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [291.815676] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [291.816086] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [291.824455] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [291.824949] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [291.824962] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [291.825634] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [291.829199] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [291.829213] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [291.830052] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [291.830068] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? yes <7> [291.830079] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no <7> [291.830088] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no <7> [291.830097] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no <7> [291.830105] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no <7> [291.830164] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [291.830202] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] found preferred mode: 3200x1800 <7> [291.830211] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [291.830264] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:58:pipe A] desired mode 3200x1800 set (0,0) <7> [291.830619] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [291.830678] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] no BIOS fb, allocating a new one <7> [291.839057] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 3200x1800 fb: 0x00180000 <6> [291.840741] fbcon: i915drmfb (fb0) is primary device <6> [291.842045] Console: switching to colour frame buffer device 200x56 <6> [291.842063] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7> [291.842077] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9 <7> [291.842586] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0 <7> [291.843002] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7> [291.843449] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no <7> [291.843853] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no <7> [291.844321] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7> [291.844752] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7> [291.845183] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no <7> [291.845654] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7> [291.846086] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7> [291.846573] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7> [291.847001] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7> [291.847462] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7> [291.847892] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7> [291.848336] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7> [291.848760] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes <7> [291.849187] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7> [291.849639] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7> [291.850054] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7> [291.850474] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7> [291.850888] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no <7> [291.851307] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz <7> [291.852277] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [291.852296] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [291.853083] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [291.853106] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [291.854412] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [291.854866] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [291.855298] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [291.856137] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [291.856152] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [291.856170] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [291.856236] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no <7> [291.856679] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [291.857100] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [291.859638] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes: <7> [291.859663] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [291.859676] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [291.859690] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [291.859703] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [291.862994] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7> [291.863520] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [291.865455] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [291.865945] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [291.866478] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [291.866916] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [291.867882] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [291.867903] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [291.867916] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [291.869041] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [291.869487] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [291.870643] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [291.871135] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [291.871148] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [291.871833] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9 <7> [291.872180] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9 <7> [291.872530] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9 <7> [291.872866] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0 <7> [291.873199] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0 <7> [291.873543] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2 <7> [291.873874] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21 <7> [291.874206] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000 <7> [291.874564] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE <7> [291.874900] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7> [291.875236] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7> [291.875582] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39 <7> [291.875919] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7> [291.876265] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7> [291.876586] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7> [291.876917] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7> [291.877240] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7> [291.877572] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7> [291.877889] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7> [291.878210] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7> [291.878556] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7> [291.878903] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no <7> [291.879240] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no <7> [291.879593] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7> [291.879930] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7> [291.880277] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7> [291.880613] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no <7> [291.880949] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no <7> [291.881307] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7> [291.881644] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7> [291.881980] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes <7> [291.882325] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7> [291.882643] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no <7> [291.882965] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7> [291.883299] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7> [291.883622] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no <7> [291.883956] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no <7> [291.884313] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no <7> [291.884638] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7> [291.884957] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no <7> [291.885286] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7> [291.885605] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7> [291.885939] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7> [291.886294] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7> [291.886615] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no <7> [291.886935] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes <7> [291.887276] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7> [291.887591] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7> [291.887910] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7> [291.888227] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7> [291.888579] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7> [291.888911] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403 <7> [291.889267] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001 <7> [291.889585] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3 <7> [291.889906] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007 <7> [291.890230] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000 <7> [291.890569] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000 <7> [291.890901] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24 <7> [291.891237] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8 <7> [291.891591] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7> [291.891926] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7> [291.892274] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes <6> [291.892588] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [291.892592] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [291.892595] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [291.892609] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [291.896004] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [291.896019] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [291.896531] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [291.896549] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [291.896562] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [291.901091] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [291.901113] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [291.901126] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [291.901796] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [291.902135] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [291.902692] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [291.903075] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [291.903087] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [291.903448] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [291.907465] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [291.907480] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [291.907885] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [291.907900] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? yes <7> [291.907910] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no <7> [291.907919] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no <7> [291.907928] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no <7> [291.907937] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no <7> [291.908809] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [291.908864] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] found preferred mode: 3200x1800 <7> [291.908875] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [291.908956] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:58:pipe A] desired mode 3200x1800 set (0,0) <7> [291.909958] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:110:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [291.910383] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:109:DDI A/PHY A][CRTC:58:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [291.910732] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000 <7> [291.911071] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [291.911453] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:109:DDI A/PHY A] [CRTC:58:pipe A] <7> [291.911796] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [291.912158] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [291.912551] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [291.912914] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [291.913302] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [291.913666] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [291.914028] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [291.914416] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [291.914774] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [291.915119] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [291.915498] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [291.915861] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [291.916224] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [291.916609] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [291.916971] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [291.917355] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [291.917716] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [291.918076] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [291.918458] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [291.918818] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [291.919060] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [291.919343] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [291.919696] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [291.920056] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [291.920450] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [291.920813] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [291.921175] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [291.921597] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [291.921958] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [291.922312] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [291.922644] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [291.922979] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [291.923374] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [291.923732] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [291.924093] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [291.924501] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dpll_hw_state <7> [291.924834] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [291.925149] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 <7> [291.925481] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [291.925845] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [291.926160] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [291.926478] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [291.926768] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [291.927055] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [291.927359] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset <7> [291.928204] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [291.928595] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [291.928962] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [291.929359] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [291.929719] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [291.930084] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [291.930465] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [291.930922] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [291.931355] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [291.931736] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [291.932099] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [291.932472] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [291.932825] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:58:pipe A] allocated DPLL 0 <7> [291.933175] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:58:pipe A] reserving DPLL 0 <7> [291.933566] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: yes [modeset] <7> [291.933887] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [291.934277] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [291.934634] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [291.934999] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [291.935378] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [291.935742] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [291.936109] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <6> [291.936474] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7> [291.936502] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [291.936861] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [291.937218] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [291.937580] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [291.937881] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [291.938193] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [291.938555] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [291.938889] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [291.939270] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [291.939625] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [291.939984] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [291.940370] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [291.940729] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [291.941091] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [291.941486] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [291.941847] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [291.942197] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [291.942580] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [291.942917] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [291.943305] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [291.943668] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [291.944031] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [291.944420] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [291.944783] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [291.945144] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [291.945545] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [291.945900] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [291.946239] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [291.946621] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [291.946981] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [291.947366] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [291.947725] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [291.948086] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [291.948469] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [291.948831] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [291.949196] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [291.949582] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:111] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [291.949946] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [291.950318] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [291.950677] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [291.951038] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no <7> [291.952181] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [291.953337] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A] <7> [291.953695] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B] <7> [291.954053] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A] <7> [291.954436] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B] <7> [291.954793] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C] <7> [291.955156] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C] <7> [291.955525] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A] <7> [291.955883] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B] <7> [291.956241] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C] <7> [291.957207] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:58:pipe A] <7> [291.957640] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [291.958728] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power on <7> [291.959284] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [291.959678] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [291.970280] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [291.970557] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power on <7> [291.970818] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000000b <7> [292.173234] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [292.174532] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [292.176319] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [292.181207] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [292.182422] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [292.184701] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [292.185658] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [292.186729] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [292.190681] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Clock recovery OK <7> [292.191678] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [292.192637] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [292.196030] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [292.196927] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [292.197900] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [292.201677] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [292.203183] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [292.206003] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [292.209074] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [292.210352] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [292.211827] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 37 <7> [292.216236] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 319 us, max time under evasion is 250 us <7> [292.225948] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [292.232954] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1] <7> [292.234442] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [292.237306] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <6> [292.244784] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7> [292.245696] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [292.245772] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [292.245798] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [292.246102] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [292.246138] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [292.246914] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [292.250922] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [292.251522] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [292.252869] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [292.254207] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [292.255984] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [292.256029] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [292.256062] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [292.256182] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no <7> [292.256907] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [292.257442] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [292.258809] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [292.268245] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes: <7> [292.268329] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [292.268375] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [292.268422] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [292.268467] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [292.275301] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [292.275361] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [292.275404] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [292.278397] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.279720] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [292.281284] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.283141] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.283184] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.284711] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [292.290608] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.290653] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [292.292145] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [292.292199] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [292.292241] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [292.297906] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [292.297962] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [292.298004] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [292.299719] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.300593] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [292.301606] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.302518] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.302544] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.303428] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [292.307885] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.307909] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [292.308585] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [292.308610] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? yes <7> [292.308627] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no <7> [292.308643] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no <7> [292.308658] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no <7> [292.308673] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no <7> [292.308766] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [292.308819] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] found preferred mode: 3200x1800 <7> [292.308836] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [292.310393] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:58:pipe A] desired mode 3200x1800 set (0,0) <7> [292.310598] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [292.310734] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [292.310630] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [292.311715] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [292.312457] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [292.313094] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [292.316457] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [292.316476] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [292.316487] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [292.316551] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no <7> [292.317010] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [292.317655] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [292.321325] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes: <7> [292.321340] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [292.321352] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [292.321489] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [292.321500] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [292.325989] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [292.326173] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [292.326190] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [292.327793] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.328285] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [292.328870] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.329547] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.329562] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.330029] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [292.333595] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.333612] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [292.333956] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [292.334067] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [292.334076] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [292.337058] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [292.337537] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [292.337907] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [292.338538] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [292.338667] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [292.338680] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [292.338704] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [292.339085] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [292.339183] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.339440] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [292.339469] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [292.339900] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.339841] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [292.340147] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.340154] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.340211] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [292.340536] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [292.340619] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [292.343915] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.343930] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [292.344385] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [292.350847] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [292.350861] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [292.355208] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [292.356222] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [292.356238] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [292.356945] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.357433] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [292.357975] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.358332] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.358344] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.358645] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [292.361727] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.361740] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [292.362052] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [292.362932] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [292.362946] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [292.367450] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <6> [292.367880] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input40 <7> [292.368143] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [292.368154] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [292.369133] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.369555] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [292.370104] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.370532] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.370543] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.370892] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [292.374161] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.374173] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [292.374627] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [292.375390] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [292.375403] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <6> [292.375784] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input41 <7> [292.375842] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [292.376192] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [292.376576] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [292.377131] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [292.377144] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [292.377152] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [292.377194] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no <7> [292.377562] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [292.377926] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [292.379519] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes: <7> [292.379533] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [292.379545] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [292.379605] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [292.379616] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <6> [292.383371] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input42 <7> [292.384134] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [292.384202] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [292.384214] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [292.387073] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.387487] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [292.388022] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.388665] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.388677] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.389029] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [292.394830] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.394846] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [292.397475] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [292.397528] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [292.397540] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [292.402065] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [292.402109] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [292.402117] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [292.404494] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.404870] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [292.405403] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.405722] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.405733] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.406065] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [292.412178] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.412193] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [292.412741] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [292.413422] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:143] <7> [293.465585] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:58:pipe A] <7> [293.466021] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [293.466965] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [293.467705] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [293.467947] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [293.468188] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [293.468461] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [293.468743] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [293.468985] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [293.469224] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [293.469482] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [293.469761] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [293.470002] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [293.470242] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [293.470500] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [293.470792] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [293.471033] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [293.471313] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [293.471602] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [293.471843] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [293.472083] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [293.472348] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [293.472629] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [293.472868] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [293.473107] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [293.473362] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [293.473705] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [293.474003] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [293.474274] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [293.474568] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [293.474875] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [293.475126] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [293.475422] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [293.475779] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [293.476032] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [293.476312] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [293.476627] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [293.476877] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [293.477118] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [293.477391] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [293.477706] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset <7> [293.477940] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0 <7> [293.478214] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [293.478494] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [293.478766] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [293.478992] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [293.479248] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [293.479508] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [293.479757] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [293.480041] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [293.480333] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz <7> [293.480611] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [293.480893] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [293.481276] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [293.481645] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset] <7> [293.482008] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no <7> [293.482382] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [293.482748] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no <7> [293.483185] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [293.484786] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [293.660501] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [293.692634] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0 <7> [293.695316] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [293.711491] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off <7> [293.711972] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [293.712315] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time <7> [293.713168] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [293.713094] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short <7> [293.764178] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [293.764573] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [293.765644] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long <7> [293.765756] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [293.766943] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [293.767401] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [293.767776] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A] <7> [293.769313] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [293.769591] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [293.770961] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [293.773663] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A] <7> [293.775161] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B] <7> [293.776533] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A] <7> [293.777856] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B] <7> [293.779197] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C] <7> [293.780241] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C] <7> [293.781225] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A] <7> [293.782150] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B] <7> [293.783021] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C] <7> [293.783961] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1] <7> [293.785691] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [293.788323] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:83:pipe B] <7> [293.789425] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:108:pipe C] <7> [293.892735] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [293.894347] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [293.895305] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [293.896603] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [293.898708] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [293.916313] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [294.004001] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:110:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [294.004969] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:109:DDI A/PHY A][CRTC:58:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [294.005811] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000 <7> [294.006954] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [294.008048] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:109:DDI A/PHY A] [CRTC:58:pipe A] <7> [294.008912] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [294.009954] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [294.010838] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [294.011995] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [294.013120] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [294.014730] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [294.015989] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [294.017064] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [294.017950] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [294.019016] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [294.019920] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [294.020981] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [294.022349] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [294.023387] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [294.024227] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [294.025148] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [294.026197] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [294.027224] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [294.028303] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [294.029152] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [294.030166] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [294.031185] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [294.032346] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [294.033715] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [294.035068] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [294.036423] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [294.037770] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [294.038798] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [294.039759] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [294.041096] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [294.042441] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [294.043759] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [294.045158] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [294.046487] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [294.047759] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [294.048804] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [294.049730] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [294.050699] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [294.051576] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [294.052532] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset <7> [294.053712] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [294.054616] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [294.055491] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [294.056715] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [294.057668] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [294.058765] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [294.059644] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [294.060886] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [294.061909] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [294.062914] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [294.063814] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [294.064892] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [294.065856] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:58:pipe A] allocated DPLL 0 <7> [294.067209] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:58:pipe A] reserving DPLL 0 <7> [294.068570] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: yes [modeset] <7> [294.069910] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [294.071221] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [294.072577] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [294.073580] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [294.074537] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [294.075874] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [294.077203] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [294.078553] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [294.079884] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [294.081183] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [294.082233] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [294.083438] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [294.084784] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [294.086128] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [294.087460] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [294.088777] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [294.090019] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [294.090925] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [294.091994] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [294.092866] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [294.093899] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [294.094798] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [294.095858] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [294.096769] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [294.097800] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [294.098682] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [294.099932] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [294.101022] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [294.102085] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [294.102982] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [294.104014] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [294.104885] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [294.105908] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [294.106797] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [294.107830] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [294.108954] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [294.109957] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [294.110861] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [294.111810] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [294.112679] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [294.113621] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [294.114598] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [294.115617] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [294.116520] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:111] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [294.117642] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [294.118896] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [294.120246] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [294.121577] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no <7> [294.134390] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [294.145729] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [294.146065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [294.146749] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [294.147528] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [294.148382] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [294.149317] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A] <7> [294.149630] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B] <7> [294.149919] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A] <7> [294.150189] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B] <7> [294.150485] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C] <7> [294.150781] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C] <7> [294.151050] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A] <7> [294.151356] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B] <7> [294.151642] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C] <7> [294.152154] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:58:pipe A] <7> [294.152520] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [294.153029] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power on <7> [294.153464] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (112 ms remaining) <7> [294.268701] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [294.278395] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [294.278830] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power on <7> [294.279291] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003 <7> [294.328630] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [294.329615] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long <7> [294.330507] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [294.331491] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [294.487863] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [294.489164] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [294.490499] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [294.493557] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on <7> [294.495186] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b <7> [294.502554] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [294.503377] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [294.506760] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [294.508219] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [294.509558] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [294.514413] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Clock recovery OK <7> [294.515745] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [294.517063] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [294.520739] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [294.522203] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [294.523560] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [294.527649] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [294.529108] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [294.531610] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [294.534837] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [294.536150] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [294.538003] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 37 <7> [294.542253] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 328 us, max time under evasion is 250 us <7> [294.550665] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [294.557190] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1] <7> [294.559037] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [294.564500] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [294.565857] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [294.573153] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [294.574707] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [294.575745] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [294.577048] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [294.578450] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [294.578487] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [294.579629] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [294.587471] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [294.587513] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [294.590052] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [294.595819] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [294.597626] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [294.598923] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [294.601049] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [294.602606] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [294.602645] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [294.604496] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [294.610461] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [294.610489] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [294.705830] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [294.706641] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [294.719403] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [294.744958] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [294.745368] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [294.758094] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [294.823956] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [294.825813] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [294.834314] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [294.834787] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [294.835195] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [294.835888] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [294.836559] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [294.837195] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [294.837850] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [294.838546] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [294.839402] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [294.841108] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [294.929744] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [294.930891] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [294.931411] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [294.932163] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <6> [294.936777] Console: switching to colour dummy device 80x25 <7> [294.937194] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:111] is removed <7> [294.937417] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [294.938191] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [294.938970] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [294.939721] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [294.940448] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [294.942355] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [294.950865] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [294.955829] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [294.956528] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [294.957165] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [294.957818] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [294.958458] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [294.959079] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [294.959774] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [294.960414] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [294.960915] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [294.961456] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [294.961972] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [294.962620] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [294.963090] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [294.963733] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [294.964241] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [294.964752] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [294.965277] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [294.965845] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [294.966767] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [294.967433] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [294.968173] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [294.968932] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [294.969614] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [294.970345] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [294.971078] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [294.971741] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [294.972248] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [294.972906] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [294.973734] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [294.974499] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [294.975237] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [294.975968] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [294.976604] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [294.977071] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [294.977699] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [294.978461] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [294.979199] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [294.979957] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [294.980708] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [294.981398] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset <7> [294.981961] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0 <7> [294.982651] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [294.983183] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [294.983843] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [294.984360] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [294.984818] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [294.985304] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [294.985806] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset] <7> [294.986310] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no <7> [294.986804] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [294.987445] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no <7> [294.988742] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [295.196745] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0 <7> [295.199061] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [295.220980] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off <7> [295.221509] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [295.221979] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time <7> [295.222585] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short <7> [295.223010] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [295.274557] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [295.275847] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long <7> [295.277032] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [295.280387] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [295.282861] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [295.284571] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [295.287025] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A] <7> [295.290654] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [295.292415] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [295.295909] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A] <7> [295.297690] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B] <7> [295.299314] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A] <7> [295.300947] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B] <7> [295.302606] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C] <7> [295.304146] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C] <7> [295.305719] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A] <7> [295.307306] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B] <7> [295.308879] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C] <7> [295.310429] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1] <7> [295.313522] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [295.392153] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [295.439372] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:110:eDP-1] removing connector from sysfs <7> [295.471322] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:118:DP-1] removing connector from sysfs <7> [295.482225] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:127:HDMI-A-1] removing connector from sysfs <7> [295.495062] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:133:DP-2] removing connector from sysfs <7> [295.500772] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:139:HDMI-A-2] removing connector from sysfs <7> [295.530483] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (252 ms remaining) <7> [295.788861] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [295.799462] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [296.435127] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS <6> [296.437123] [IGT] i915_pm_rpm: exiting, ret=0

<6> [281.488553] Console: switching to colour dummy device 80x25

<7> [281.494170] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [281.494973] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [281.494992] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [281.495597] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [281.495870] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [281.496108] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [281.496480] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [281.496493] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [281.496501] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [281.496535] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no

<7> [281.496835] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [281.497060] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [281.499064] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes:

<7> [281.499075] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [281.499083] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [281.499180] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [281.499189] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [281.503623] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [281.503713] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [281.503722] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [281.504470] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [281.504762] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [281.505178] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [281.505512] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [281.505524] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [281.505785] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [281.508812] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [281.508821] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [281.509093] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [281.509219] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [281.509231] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [281.513640] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [281.513768] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [281.513780] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [281.514442] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [281.514819] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [281.515371] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [281.515761] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [281.515771] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [281.516114] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [281.519397] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [281.519408] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [281.519825] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [281.528894] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [281.528906] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [281.533264] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [281.533900] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [281.533909] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [281.534425] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [281.534807] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [281.535357] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [281.535753] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [281.535763] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [281.536110] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [281.539362] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [281.539372] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [281.539797] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [281.540767] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [281.540781] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [281.545281] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [281.545902] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [281.545910] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [281.546410] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [281.546760] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [281.547293] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [281.547666] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [281.547676] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [281.548015] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [281.551238] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [281.551248] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [281.551637] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [281.552389] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [281.552402] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [281.552827] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [281.553192] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [281.553556] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [281.553962] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [281.553973] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [281.553981] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [281.554020] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no

<7> [281.554382] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [281.554740] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [281.556022] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes:

<7> [281.556035] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [281.556046] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [281.556087] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [281.556095] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [281.560558] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [281.560590] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [281.560598] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [281.561099] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [281.561378] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [281.561798] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [281.562036] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [281.562044] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [281.562282] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [281.565290] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [281.565298] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [281.565535] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [281.565566] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [281.565574] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [281.569881] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [281.569911] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [281.569919] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [281.570428] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [281.570679] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [281.571085] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [281.571364] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [281.571374] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [281.571646] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [281.574650] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [281.574658] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [281.574913] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [281.575534] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:144]

<7> [281.929308] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [282.618832] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:58:pipe A]

<7> [282.619585] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [282.620658] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [282.620923] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [282.621184] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [282.621477] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [282.621767] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [282.622018] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [282.622291] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [282.622573] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [282.622815] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [282.623056] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [282.623313] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [282.623576] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [282.623817] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [282.624057] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [282.624348] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [282.624599] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [282.624840] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [282.625080] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [282.625342] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [282.625602] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [282.625842] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [282.626081] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [282.626338] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [282.626596] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [282.626929] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [282.627189] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [282.627469] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [282.627791] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [282.628054] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [282.628340] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [282.628670] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [282.628913] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [282.629154] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [282.629465] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [282.629850] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [282.630244] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [282.630614] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [282.630987] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [282.631381] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset

<7> [282.631765] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0

<7> [282.632185] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [282.632492] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [282.632771] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [282.633029] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [282.633340] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [282.633642] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [282.633906] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [282.634286] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [282.634598] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz

<7> [282.634916] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [282.635178] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [282.635469] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [282.635753] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset]

<7> [282.636019] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no

<7> [282.636318] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [282.636600] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no

<7> [282.637041] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [282.638680] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [282.847791] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0

<7> [282.848710] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [282.861195] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off

<7> [282.861481] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [282.861743] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [282.861836] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [282.862296] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short

<7> [282.914532] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [282.915051] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long

<7> [282.915563] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [282.918266] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [282.919175] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [282.920189] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [282.920396] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A]

<7> [282.920933] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [282.921566] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [282.922504] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [282.924398] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A]

<7> [282.925334] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B]

<7> [282.926141] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A]

<7> [282.926990] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B]

<7> [282.927815] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C]

<7> [282.928647] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C]

<7> [282.929468] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A]

<7> [282.930280] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B]

<7> [282.931084] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C]

<7> [282.931899] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1]

<7> [282.933468] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [282.935670] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:83:pipe B]

<7> [282.936502] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:108:pipe C]

<7> [283.036985] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [283.039061] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [283.040163] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [283.042162] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [283.045101] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [283.066345] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [283.148509] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:110:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [283.149677] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:109:DDI A/PHY A][CRTC:58:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [283.150837] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000

<7> [283.152404] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [283.154650] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:109:DDI A/PHY A] [CRTC:58:pipe A]

<7> [283.156267] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [283.157670] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [283.159574] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [283.161399] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [283.163006] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [283.164632] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [283.166254] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [283.167807] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [283.169370] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [283.170840] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [283.172419] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [283.173984] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [283.175587] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [283.177030] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [283.178488] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [283.179891] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [283.181460] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [283.183016] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [283.184450] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [283.185509] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [283.186969] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [283.188511] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [283.189869] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [283.191253] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [283.192593] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [283.193899] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [283.195112] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [283.196448] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [283.197813] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [283.199150] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [283.200506] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [283.201846] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [283.203020] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [283.204154] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [283.205093] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [283.206154] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [283.207085] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [283.208164] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [283.209048] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [283.210084] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset

<7> [283.211204] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [283.212298] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [283.213112] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [283.214148] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [283.215461] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [283.216777] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [283.218071] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [283.219651] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [283.221136] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [283.222065] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [283.223355] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [283.224711] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [283.226041] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:58:pipe A] allocated DPLL 0

<7> [283.227436] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:58:pipe A] reserving DPLL 0

<7> [283.228791] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: yes [modeset]

<7> [283.229698] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [283.230900] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [283.232285] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [283.233623] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [283.234953] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [283.236277] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [283.237560] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [283.238699] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [283.240043] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [283.241369] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [283.242700] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [283.244026] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [283.245368] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [283.246588] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [283.247765] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [283.249060] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [283.250411] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [283.251742] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [283.253066] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [283.254117] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [283.254973] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [283.255670] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [283.256451] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [283.257340] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [283.258195] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [283.259087] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [283.259979] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [283.260751] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [283.261518] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [283.262098] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [283.262656] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [283.263154] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [283.263606] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [283.264098] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [283.264559] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [283.265044] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [283.265494] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [283.266041] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [283.266569] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [283.267062] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [283.267522] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [283.268014] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [283.268480] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [283.268974] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:111] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [283.269422] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [283.269913] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [283.270367] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [283.270907] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no

<7> [283.283317] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [283.294877] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [283.295133] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [283.295485] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [283.296138] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [283.296813] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [283.297601] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A]

<7> [283.297853] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B]

<7> [283.298122] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A]

<7> [283.298504] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B]

<7> [283.298837] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C]

<7> [283.299155] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C]

<7> [283.299479] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A]

<7> [283.299806] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B]

<7> [283.300105] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C]

<7> [283.300529] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:58:pipe A]

<7> [283.300756] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [283.301243] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power on

<7> [283.301700] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (118 ms remaining)

<7> [283.428653] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [283.448407] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [283.449142] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power on

<7> [283.449962] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003

<7> [283.499529] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [283.500515] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long

<7> [283.501489] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [283.502405] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [283.652182] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [283.653620] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [283.654920] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [283.658485] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on

<7> [283.660199] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b

<7> [283.666800] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [283.668051] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [283.671799] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [283.673364] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [283.674880] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [283.678616] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Clock recovery OK

<7> [283.679815] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [283.681181] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [283.686098] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [283.687112] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [283.688420] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [283.691894] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [283.692912] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [283.694875] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [283.697491] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [283.698650] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [283.700184] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 37

<7> [283.713327] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [283.718914] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1]

<7> [283.720409] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [283.725049] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [283.725948] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [283.731016] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [283.733027] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [283.734489] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<6> [283.735139] [IGT] i915_pm_rpm: starting subtest module-reload

<7> [283.736864] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [283.738521] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [283.738565] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [283.740244] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [283.747272] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [283.747321] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [283.748955] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [283.755120] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [283.757173] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [283.758683] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [283.760610] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [283.762184] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [283.762295] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [283.764011] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [283.770169] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [283.770244] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [283.883855] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [283.884717] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [283.898209] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [283.923924] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [283.924410] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [283.937378] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [283.986197] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [283.988741] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [284.002454] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [284.003176] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [284.004023] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [284.007340] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [284.007992] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [284.008711] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [284.009399] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [284.010039] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [284.011969] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [284.014050] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [284.130121] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [284.130966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [284.131355] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [284.131806] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [284.134166] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:111] is removed

<7> [284.134353] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [284.134920] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [284.135514] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [284.136045] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [284.136624] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [284.137479] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [284.146829] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [284.147656] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [284.148207] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [284.148717] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [284.149419] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [284.150080] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [284.150761] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [284.151440] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [284.152090] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [284.152765] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [284.153530] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [284.154187] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [284.155010] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [284.155696] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [284.156372] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [284.157030] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [284.157703] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [284.158390] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [284.159041] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [284.159713] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [284.160452] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [284.161109] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [284.161795] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [284.162466] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [284.163123] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [284.163796] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [284.164455] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [284.165110] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [284.165779] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [284.166471] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [284.167121] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [284.167795] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [284.168458] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [284.169112] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [284.169798] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [284.170471] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [284.171127] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [284.171803] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [284.172479] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [284.173137] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [284.173813] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset

<7> [284.174448] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0

<7> [284.177350] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [284.178119] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [284.178947] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [284.179613] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [284.180271] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [284.180919] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [284.181588] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset]

<7> [284.182275] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no

<7> [284.182933] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [284.183629] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no

<7> [284.185125] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [284.388525] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0

<7> [284.390601] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [284.399929] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off

<7> [284.400461] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [284.400966] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [284.401451] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short

<7> [284.401852] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [284.453534] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [284.453985] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [284.454673] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long

<7> [284.455831] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [284.457748] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [284.458356] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A]

<7> [284.459202] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [284.460437] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [284.462122] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [284.465355] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A]

<7> [284.467156] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B]

<7> [284.468716] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A]

<7> [284.470157] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B]

<7> [284.471722] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C]

<7> [284.473295] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C]

<7> [284.474842] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A]

<7> [284.476400] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B]

<7> [284.477847] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C]

<7> [284.479355] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1]

<7> [284.482473] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [284.551916] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [284.594285] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:110:eDP-1] removing connector from sysfs

<7> [284.617921] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:118:DP-1] removing connector from sysfs

<7> [284.624957] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:127:HDMI-A-1] removing connector from sysfs

<7> [284.644987] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:133:DP-2] removing connector from sysfs

<7> [284.651158] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:139:HDMI-A-2] removing connector from sysfs

<7> [284.671683] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (284 ms remaining)

<7> [284.964837] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [285.058512] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<5> [286.515092] Setting dangerous option force_probe - tainting kernel

<6> [286.527426] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0

<7> [286.529145] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K

<7> [286.529718] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [286.529996] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH

<7> [286.530271] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [286.530632] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [286.531234] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [286.531593] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [286.532811] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [286.533038] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [286.533258] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [286.533481] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [286.533494] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [286.534274] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [286.534328] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [286.534698] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [286.535056] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7716 MiB [mem 0x00000000-0x1e24e0fff], io: n/a

<7> [286.535384] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a

<7> [286.536041] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018

<7> [286.536399] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [286.536774] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [286.537147] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [286.537538] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [286.546276] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [286.546558] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [286.546806] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [286.547053] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [286.547347] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [286.547737] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [286.548125] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no

<7> [286.548539] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [286.548923] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [286.549196] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no

<7> [286.549515] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes

<7> [286.549804] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no

<7> [286.550189] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3

<7> [286.550590] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [286.550977] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0

<7> [286.551373] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0

<7> [286.552285] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [286.552586] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203

<7> [286.552882] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [286.553143] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [286.553421] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [286.553727] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [286.553988] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 850)

<7> [286.554268] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [286.554562] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [286.554824] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [286.555083] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [286.556265] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136)

<7> [286.556656] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [286.557018] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [286.557292] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [286.557600] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [286.557967] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [286.558389] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [286.558768] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [286.559151] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [286.559539] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [286.559846] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [286.560095] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [286.560370] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [286.560676] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [286.560950] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [286.561304] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [286.561632] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [286.561894] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [286.562150] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [286.562420] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [286.562752] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [286.563104] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [286.563403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [286.563707] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [286.563977] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [286.564325] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [286.564606] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [286.564864] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [286.565177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [286.566031] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<7> [286.567096] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [286.567420] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [286.567733] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [286.567998] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<6> [286.568685] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [286.569302] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [286.569901] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [286.570332] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [286.570640] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided

<7> [286.570901] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec)

<7> [286.571151] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec)

<7> [286.571429] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec)

<7> [286.571728] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec)

<7> [286.571978] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec)

<7> [286.572239] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec)

<7> [286.572544] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec)

<7> [286.572808] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec)

<7> [286.573100] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec)

<7> [286.573374] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec)

<7> [286.573655] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec)

<7> [286.573903] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec)

<7> [286.574151] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec)

<7> [286.574453] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec)

<7> [286.574753] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec)

<7> [286.578680] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available.

<7> [286.582452] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [286.582909] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:109:DDI A/PHY A] Using AUX CH A (VBT)

<7> [286.583353] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:109:DDI A/PHY A]

<7> [286.591048] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [286.591575] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [286.591971] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [286.592390] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [286.594369] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [286.594787] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [286.595186] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP

<7> [286.595778] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [286.596168] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0

<7> [286.596585] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0

<7> [286.597494] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:109:DDI A/PHY A] initial power sequencer: PPS 0

<7> [286.597933] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [286.598331] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [286.598694] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [286.599071] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [286.599452] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [286.599871] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [286.600730] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on

<7> [286.601144] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [286.601580] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [286.612251] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [286.612564] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [286.612810] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [286.822168] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [286.823049] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [286.825989] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00

<7> [286.829831] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [286.846875] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [286.846920] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [286.846949] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [286.847477] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [286.848995] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [286.850819] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:110:eDP-1] DRRS type: static

<7> [286.852788] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:110:eDP-1] Using native PCH PWM for backlight control

<7> [286.854308] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:110:eDP-1] backlight initialized, disabled, brightness 0/937

<7> [286.856620] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [286.858045] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [286.859348] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [286.860777] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [286.862527] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [286.864067] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [286.866965] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:117:DDI B/PHY B] Using AUX CH B (VBT)

<7> [286.868480] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:117:DDI B/PHY B]

<7> [286.873369] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [286.874846] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:117:DDI B/PHY B]

<7> [286.876125] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:117:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [286.879872] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:132:DDI C/PHY C] Using AUX CH C (VBT)

<7> [286.881768] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:132:DDI C/PHY C]

<7> [286.885854] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [286.887595] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:132:DDI C/PHY C]

<7> [286.888937] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:132:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [286.893772] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled

<6> [286.895821] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem

<7> [286.897311] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] hw state readout: disabled

<7> [286.899790] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] hw state readout: disabled

<7> [286.901894] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] hw state readout: disabled

<7> [286.903487] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] hw state readout: disabled, pipe A

<7> [286.905198] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A

<7> [286.906821] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] hw state readout: disabled, pipe A

<7> [286.908612] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] hw state readout: disabled, pipe B

<7> [286.910516] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] hw state readout: disabled, pipe B

<7> [286.912130] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] hw state readout: disabled, pipe B

<7> [286.913715] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] hw state readout: disabled, pipe C

<7> [286.915380] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] hw state readout: disabled, pipe C

<7> [286.916927] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] hw state readout: disabled, pipe C

<7> [286.918587] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [286.920084] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [286.921754] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST A] hw state readout: disabled, pipe A

<7> [286.923375] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST B] hw state readout: disabled, pipe B

<7> [286.924745] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST C] hw state readout: disabled, pipe C

<7> [286.926403] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:132:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [286.927805] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST A] hw state readout: disabled, pipe A

<7> [286.929283] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST B] hw state readout: disabled, pipe B

<7> [286.930696] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST C] hw state readout: disabled, pipe C

<7> [286.932285] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [286.934319] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [286.935403] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [286.936387] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [286.937535] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:110:eDP-1] hw state readout: disabled

<7> [286.938538] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:118:DP-1] hw state readout: disabled

<7> [286.939586] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:127:HDMI-A-1] hw state readout: disabled

<7> [286.940550] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:133:DP-2] hw state readout: disabled

<7> [286.941916] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:139:HDMI-A-2] hw state readout: disabled

<7> [286.942786] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] min_cdclk 0 kHz

<7> [286.943597] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] min_cdclk 0 kHz

<7> [286.944187] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] min_cdclk 0 kHz

<7> [286.944807] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] min_cdclk 0 kHz

<7> [286.945413] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] min_cdclk 0 kHz

<7> [286.945957] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] min_cdclk 0 kHz

<7> [286.946533] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] min_cdclk 0 kHz

<7> [286.947272] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] min_cdclk 0 kHz

<7> [286.947877] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] min_cdclk 0 kHz

<7> [286.948494] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] min_cdclk 0 kHz

<7> [286.949074] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] min_cdclk 0 kHz

<7> [286.949660] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] min_cdclk 0 kHz

<7> [286.950259] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:58:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [286.950796] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:83:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [286.951377] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:108:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [286.952482] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [setup_hw_state]

<7> [286.952945] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [setup_hw_state]

<7> [286.953493] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [setup_hw_state]

<7> [286.954137] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [286.954925] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [286.955491] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [286.956062] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [286.956604] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global

<7> [286.960420] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [286.960855] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [286.961508] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0

<7> [286.985757] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [286.986009] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [286.986242] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [286.986553] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [286.986878] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 0: start 0x8

<7> [286.987279] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 1: start 0x108

<7> [286.987663] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 2: start 0x208

<7> [286.988017] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 3: start 0x308

<7> [286.988286] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 4: start 0x3c8

<7> [286.988583] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 0: start 0x8

<7> [286.988907] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 1: start 0x108

<7> [286.989391] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 2: start 0x208

<7> [286.989779] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 3: start 0x308

<7> [286.990160] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 4: start 0x3c8

<7> [286.990555] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 0: start 0x8

<7> [286.990905] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 1: start 0x108

<7> [286.991176] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 2: start 0x208

<7> [286.991490] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 3: start 0x308

<7> [286.991792] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 4: start 0x3c8

<7> [286.992291] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [fastset]

<7> [286.992621] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [fastset]

<7> [286.992868] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [fastset]

<7> [286.993339] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [286.994032] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:83:pipe B]

<7> [286.994497] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:108:pipe C]

<7> [286.994898] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [286.999613] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:110:eDP-1] adding connector to sysfs

<7> [287.000753] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:110:eDP-1] backlight device intel_backlight registered

<7> [287.001219] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:110:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [287.002161] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [287.004827] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:110:eDP-1] generating connector hotplug event

<7> [287.004931] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:118:DP-1] adding connector to sysfs

<7> [287.006039] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [287.008064] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:118:DP-1] generating connector hotplug event

<7> [287.008208] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:127:HDMI-A-1] adding connector to sysfs

<7> [287.009377] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:127:HDMI-A-1] generating connector hotplug event

<7> [287.009477] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:133:DP-2] adding connector to sysfs

<7> [287.010800] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [287.014761] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:133:DP-2] generating connector hotplug event

<7> [287.014924] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:139:HDMI-A-2] adding connector to sysfs

<7> [287.017831] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:139:HDMI-A-2] generating connector hotplug event

<6> [287.017962] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0

<7> [287.024766] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [287.057164] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [287.067418] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input35

<7> [287.069166] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [287.073957] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [287.074412] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:118:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [287.074700] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [287.074960] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:127:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [287.075309] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [287.075710] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:133:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [287.076132] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [287.076543] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:139:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [287.076952] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [287.077519] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:58:pipe A] not active, skipping

<7> [287.077952] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:83:pipe B] not active, skipping

<7> [287.078390] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:108:pipe C] not active, skipping

<7> [287.078787] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config

<7> [287.080732] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [287.081785] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [287.081949] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [287.081965] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [287.082426] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] status updated from unknown to disconnected

<7> [287.082446] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] disconnected

<7> [287.082468] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [287.082596] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:110:eDP-1] EDID changed, epoch counter 2

<7> [287.082625] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [287.082637] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [287.083047] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [287.083059] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [287.083071] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [287.083485] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [287.083498] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [287.083509] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [287.083913] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [287.083926] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [287.083937] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [287.084354] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [287.084366] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [287.084375] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? no

<7> [287.084384] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no

<7> [287.084392] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no

<7> [287.084401] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no

<7> [287.084410] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no

<7> [287.084469] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [287.084491] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [287.084596] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [287.084612] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [287.087336] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9

<7> [287.087814] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0

<7> [287.088279] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no

<7> [287.088690] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no

<7> [287.089114] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no

<7> [287.089539] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes

<7> [287.089943] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes

<7> [287.090379] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no

<7> [287.090786] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes

<7> [287.091205] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no

<7> [287.091662] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes

<7> [287.092080] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no

<7> [287.092533] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes

<7> [287.092962] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no

<7> [287.093419] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes

<7> [287.093832] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes

<7> [287.094278] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no

<7> [287.094689] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no

<7> [287.095108] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes

<7> [287.095536] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes

<7> [287.095953] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no

<7> [287.096378] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz

<7> [287.096980] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [287.097125] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [287.097142] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [287.097571] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] disconnected

<7> [287.097588] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [287.097599] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [287.098009] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [287.098022] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [287.098034] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [287.098455] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [287.098469] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [287.098480] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [287.098888] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [287.098901] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [287.098912] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [287.099323] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [287.099338] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [287.099347] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? no

<7> [287.099357] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no

<7> [287.099366] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no

<7> [287.099375] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no

<7> [287.099384] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no

<7> [287.099448] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [287.099468] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [287.099311] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device

<7> [287.099569] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [287.099599] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [287.099771] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [287.099741] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [287.100093] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [287.101083] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [287.101617] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [287.101905] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [287.102718] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9

<7> [287.102936] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9

<7> [287.103131] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9

<7> [287.103404] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0

<7> [287.103720] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0

<7> [287.103914] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2

<7> [287.104106] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21

<7> [287.104319] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000

<7> [287.104584] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE

<7> [287.104776] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48

<7> [287.104968] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2

<7> [287.105159] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39

<7> [287.105368] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no

<7> [287.105625] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no

<7> [287.105817] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no

<7> [287.106009] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes

<7> [287.106200] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no

<7> [287.106423] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no

<7> [287.106693] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes

<7> [287.106886] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes

<7> [287.107077] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no

<7> [287.107303] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no

<7> [287.107555] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no

<7> [287.107749] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes

<7> [287.107941] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no

<7> [287.108244] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no

<7> [287.108560] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no

<7> [287.108867] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no

<7> [287.109176] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no

<7> [287.109519] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no

<7> [287.109837] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes

<7> [287.110156] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes

<7> [287.110493] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no

<7> [287.110811] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no

<7> [287.111128] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no

<7> [287.111466] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no

<7> [287.111790] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no

<7> [287.112114] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no

<7> [287.112441] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no

<7> [287.112758] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no

<7> [287.113079] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes

<7> [287.113413] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no

<7> [287.113731] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes

<7> [287.114047] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes

<7> [287.114382] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no

<7> [287.114701] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes

<7> [287.115015] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no

<7> [287.115348] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no

<7> [287.115653] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no

<7> [287.115963] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no

<7> [287.116296] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled

<7> [287.116614] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403

<7> [287.116936] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001

<7> [287.117280] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3

<7> [287.117602] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007

<7> [287.117923] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000

<7> [287.118268] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000

<7> [287.118595] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24

<7> [287.118907] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8

<7> [287.119217] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no

<7> [287.119556] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no

<7> [287.119878] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes

<6> [287.120198] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [287.120202] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [287.120207] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [287.144583] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4

<6> [287.145432] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])

<7> [287.146006] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [287.146836] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [287.149072] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [287.177455] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [287.177735] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [287.177965] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [287.178193] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [287.178468] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [287.178811] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [287.179168] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [287.179684] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [287.180086] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<6> [287.204794] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36

<6> [287.208148] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input37

<6> [287.215779] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input38

<7> [288.482710] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [289.374911] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD off

<7> [289.375259] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [289.375648] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [289.376253] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [289.376666] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [289.377505] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [289.377643] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [289.377785] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long

<7> [289.378065] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [289.378407] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [289.378753] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [289.384382] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [289.457866] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [289.484435] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [289.493872] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [289.494466] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [289.495145] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [289.495788] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [289.496440] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [289.497034] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [289.497667] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [289.498862] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [289.499805] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [289.502397] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [289.515394] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [289.515930] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [289.516417] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [289.517039] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [289.518097] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [289.642753] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [289.643144] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [289.644327] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [289.644961] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [289.645606] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [289.652493] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [289.652747] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [289.652962] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [289.653173] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [289.653595] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [289.653941] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [289.654297] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [289.654635] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [289.654978] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [289.656409] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [289.657105] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [289.657508] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [289.657867] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [289.658627] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [289.742070] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [289.742622] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [289.743550] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [289.744594] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [289.745648] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [289.746466] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [289.747161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [289.747710] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [289.748341] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [289.791749] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [289.812965] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:110:eDP-1] removing connector from sysfs

<7> [289.820941] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:118:DP-1] removing connector from sysfs

<7> [289.822851] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:127:HDMI-A-1] removing connector from sysfs

<7> [289.833327] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:133:DP-2] removing connector from sysfs

<7> [289.840546] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:139:HDMI-A-2] removing connector from sysfs

<7> [289.865478] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (11 ms remaining)

<7> [289.879400] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [289.889409] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<5> [291.200592] Setting dangerous option force_probe - tainting kernel

<6> [291.212978] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0

<7> [291.214805] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K

<7> [291.215200] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [291.215505] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH

<7> [291.215914] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [291.216380] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [291.216963] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [291.217331] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [291.218655] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [291.219021] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [291.219387] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [291.219711] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [291.219725] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [291.220638] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [291.220696] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [291.221084] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [291.221476] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7716 MiB [mem 0x00000000-0x1e24e0fff], io: n/a

<7> [291.221798] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a

<7> [291.222674] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018

<7> [291.223161] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [291.223572] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [291.223956] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [291.224353] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [291.231268] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [291.231626] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [291.231874] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [291.232121] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [291.232414] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [291.232728] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [291.232985] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no

<7> [291.233261] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [291.233567] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [291.233824] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no

<7> [291.234078] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes

<7> [291.234395] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no

<7> [291.234693] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3

<7> [291.234949] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [291.235221] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0

<7> [291.235616] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0

<7> [291.236790] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [291.237225] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203

<7> [291.237647] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [291.238058] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [291.238481] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [291.238890] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [291.239310] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 850)

<7> [291.239719] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [291.240128] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [291.240551] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [291.240961] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [291.241375] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136)

<7> [291.241772] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [291.242169] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [291.242573] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [291.242990] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [291.243407] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [291.243812] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [291.244207] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [291.244677] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [291.245073] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [291.245478] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [291.245877] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [291.246293] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [291.246703] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [291.247130] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [291.247651] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [291.248088] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [291.248505] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [291.248907] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [291.249311] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [291.249706] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [291.250231] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [291.250646] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [291.251051] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [291.251485] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [291.251984] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [291.252399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [291.252806] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [291.253209] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [291.254441] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<7> [291.256686] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [291.257149] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [291.257576] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [291.257992] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [291.258886] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [291.259742] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [291.260296] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [291.260708] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided

<7> [291.261112] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec)

<7> [291.261527] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec)

<7> [291.261932] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec)

<7> [291.262349] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec)

<7> [291.262752] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec)

<7> [291.263151] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec)

<7> [291.263583] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec)

<7> [291.263986] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec)

<7> [291.264401] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec)

<7> [291.264801] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec)

<7> [291.265200] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec)

<7> [291.265611] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec)

<7> [291.266010] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec)

<7> [291.266419] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec)

<7> [291.266822] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec)

<6> [291.267655] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [291.273331] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available.

<7> [291.277231] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [291.277752] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:109:DDI A/PHY A] Using AUX CH A (VBT)

<7> [291.278191] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:109:DDI A/PHY A]

<7> [291.286265] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [291.286705] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [291.287100] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [291.287523] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [291.287934] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [291.288362] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [291.288773] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP

<7> [291.289179] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [291.289596] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0

<7> [291.290008] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0

<7> [291.290695] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:109:DDI A/PHY A] initial power sequencer: PPS 0

<7> [291.291142] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [291.291535] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [291.291921] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [291.292318] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [291.292699] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [291.293130] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [291.293996] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on

<7> [291.294450] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [291.294887] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [291.305423] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [291.305746] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [291.306000] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [291.509979] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [291.513499] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [291.515355] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00

<7> [291.518825] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [291.536461] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [291.536502] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [291.536526] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [291.536945] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [291.538402] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [291.540238] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:110:eDP-1] DRRS type: static

<7> [291.542405] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:110:eDP-1] Using native PCH PWM for backlight control

<7> [291.544129] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:110:eDP-1] backlight initialized, disabled, brightness 0/937

<7> [291.546431] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [291.547740] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [291.549626] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [291.551497] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [291.553120] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [291.554773] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [291.557748] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:117:DDI B/PHY B] Using AUX CH B (VBT)

<7> [291.559600] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:117:DDI B/PHY B]

<7> [291.564963] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [291.566357] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:117:DDI B/PHY B]

<7> [291.567968] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:117:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [291.571745] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:132:DDI C/PHY C] Using AUX CH C (VBT)

<7> [291.573584] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:132:DDI C/PHY C]

<7> [291.577356] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [291.579199] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:132:DDI C/PHY C]

<7> [291.580827] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:132:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [291.584801] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled

<6> [291.586032] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem

<7> [291.587216] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] hw state readout: disabled

<7> [291.589826] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] hw state readout: disabled

<7> [291.592356] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] hw state readout: disabled

<7> [291.594153] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] hw state readout: disabled, pipe A

<7> [291.595600] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A

<7> [291.597565] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] hw state readout: disabled, pipe A

<7> [291.599477] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] hw state readout: disabled, pipe B

<7> [291.601448] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] hw state readout: disabled, pipe B

<7> [291.603302] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] hw state readout: disabled, pipe B

<7> [291.604779] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] hw state readout: disabled, pipe C

<7> [291.606693] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] hw state readout: disabled, pipe C

<7> [291.608570] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] hw state readout: disabled, pipe C

<7> [291.610503] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [291.612130] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [291.613615] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST A] hw state readout: disabled, pipe A

<7> [291.615325] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST B] hw state readout: disabled, pipe B

<7> [291.617046] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST C] hw state readout: disabled, pipe C

<7> [291.619036] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:132:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [291.620674] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST A] hw state readout: disabled, pipe A

<7> [291.622048] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST B] hw state readout: disabled, pipe B

<7> [291.623274] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST C] hw state readout: disabled, pipe C

<7> [291.624821] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [291.626208] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [291.627684] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [291.628889] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [291.630088] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:110:eDP-1] hw state readout: disabled

<7> [291.631283] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:118:DP-1] hw state readout: disabled

<7> [291.632186] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:127:HDMI-A-1] hw state readout: disabled

<7> [291.633149] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:133:DP-2] hw state readout: disabled

<7> [291.634104] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:139:HDMI-A-2] hw state readout: disabled

<7> [291.634855] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] min_cdclk 0 kHz

<7> [291.635705] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] min_cdclk 0 kHz

<7> [291.636622] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] min_cdclk 0 kHz

<7> [291.637492] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] min_cdclk 0 kHz

<7> [291.638044] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] min_cdclk 0 kHz

<7> [291.638579] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] min_cdclk 0 kHz

<7> [291.639205] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] min_cdclk 0 kHz

<7> [291.639791] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] min_cdclk 0 kHz

<7> [291.640418] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] min_cdclk 0 kHz

<7> [291.640941] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] min_cdclk 0 kHz

<7> [291.641608] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] min_cdclk 0 kHz

<7> [291.642188] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] min_cdclk 0 kHz

<7> [291.642731] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:58:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [291.643358] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:83:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [291.643860] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:108:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [291.644843] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [setup_hw_state]

<7> [291.645405] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [setup_hw_state]

<7> [291.645980] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [setup_hw_state]

<7> [291.646673] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [291.647233] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [291.647581] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [291.648003] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [291.648455] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global

<7> [291.651618] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [291.652027] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [291.652484] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0

<7> [291.677136] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [291.677414] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [291.677607] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [291.677797] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [291.677989] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 0: start 0x8

<7> [291.678240] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 1: start 0x108

<7> [291.678545] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 2: start 0x208

<7> [291.678889] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 3: start 0x308

<7> [291.679281] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 4: start 0x3c8

<7> [291.679655] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 0: start 0x8

<7> [291.680000] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 1: start 0x108

<7> [291.680393] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 2: start 0x208

<7> [291.680776] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 3: start 0x308

<7> [291.681118] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 4: start 0x3c8

<7> [291.681395] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 0: start 0x8

<7> [291.681684] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 1: start 0x108

<7> [291.681941] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 2: start 0x208

<7> [291.682198] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 3: start 0x308

<7> [291.682507] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 4: start 0x3c8

<7> [291.682993] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [fastset]

<7> [291.683271] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [fastset]

<7> [291.683572] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [fastset]

<7> [291.684098] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [291.684741] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:83:pipe B]

<7> [291.685142] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:108:pipe C]

<7> [291.685572] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [291.691547] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:110:eDP-1] adding connector to sysfs

<7> [291.694174] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:110:eDP-1] backlight device intel_backlight registered

<7> [291.694736] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:110:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [291.695738] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [291.698173] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:110:eDP-1] generating connector hotplug event

<7> [291.698386] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:118:DP-1] adding connector to sysfs

<7> [291.699975] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [291.702134] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:118:DP-1] generating connector hotplug event

<7> [291.702277] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:127:HDMI-A-1] adding connector to sysfs

<7> [291.703278] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:127:HDMI-A-1] generating connector hotplug event

<7> [291.703392] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:133:DP-2] adding connector to sysfs

<7> [291.704610] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [291.707061] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:133:DP-2] generating connector hotplug event

<7> [291.707208] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:139:HDMI-A-2] adding connector to sysfs

<7> [291.708412] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:139:HDMI-A-2] generating connector hotplug event

<6> [291.708530] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0

<7> [291.714274] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [291.747367] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [291.756960] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input39

<7> [291.759449] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [291.764576] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [291.765859] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:58:pipe A] not active, skipping

<7> [291.766325] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:83:pipe B] not active, skipping

<7> [291.766719] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:108:pipe C] not active, skipping

<7> [291.767118] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config

<7> [291.768165] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [291.769292] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:118:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [291.769731] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [291.770806] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [291.771226] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [291.771835] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [291.772969] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [291.773182] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [291.773194] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [291.773653] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [291.777032] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [291.777046] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [291.777549] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:127:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [291.777966] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [291.782544] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:133:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [291.782980] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [291.783672] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [291.784064] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [291.784680] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [291.785107] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [291.785119] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [291.785518] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [291.788818] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [291.788833] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [291.789336] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:139:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [291.790371] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [291.790382] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [291.790400] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [291.791131] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [291.791562] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [291.791958] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [291.793334] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [291.793350] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [291.793360] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [291.793408] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no

<7> [291.793849] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [291.794289] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [291.796368] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] status updated from unknown to connected

<7> [291.796407] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [291.796914] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes:

<7> [291.796927] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [291.796940] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [291.796953] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [291.796966] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [291.801778] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [291.801799] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [291.801812] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [291.803032] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [291.803502] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [291.804940] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [291.805449] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [291.805462] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [291.805867] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [291.809467] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [291.809481] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [291.809946] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [291.809962] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [291.809975] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [291.814725] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [291.814743] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [291.814755] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [291.815676] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [291.816086] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [291.824455] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [291.824949] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [291.824962] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [291.825634] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [291.829199] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [291.829213] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [291.830052] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [291.830068] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? yes

<7> [291.830079] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no

<7> [291.830088] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no

<7> [291.830097] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no

<7> [291.830105] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no

<7> [291.830164] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [291.830202] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] found preferred mode: 3200x1800

<7> [291.830211] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [291.830264] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:58:pipe A] desired mode 3200x1800 set (0,0)

<7> [291.830619] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [291.830678] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] no BIOS fb, allocating a new one

<7> [291.839057] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 3200x1800 fb: 0x00180000

<6> [291.840741] fbcon: i915drmfb (fb0) is primary device

<6> [291.842045] Console: switching to colour frame buffer device 200x56

<6> [291.842063] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device

<7> [291.842077] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9

<7> [291.842586] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0

<7> [291.843002] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no

<7> [291.843449] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no

<7> [291.843853] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no

<7> [291.844321] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes

<7> [291.844752] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes

<7> [291.845183] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no

<7> [291.845654] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes

<7> [291.846086] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no

<7> [291.846573] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes

<7> [291.847001] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no

<7> [291.847462] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes

<7> [291.847892] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no

<7> [291.848336] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes

<7> [291.848760] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes

<7> [291.849187] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no

<7> [291.849639] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no

<7> [291.850054] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes

<7> [291.850474] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes

<7> [291.850888] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no

<7> [291.851307] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz

<7> [291.852277] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [291.852296] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [291.853083] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [291.853106] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [291.854412] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [291.854866] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [291.855298] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [291.856137] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [291.856152] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [291.856170] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [291.856236] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no

<7> [291.856679] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [291.857100] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [291.859638] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes:

<7> [291.859663] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [291.859676] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [291.859690] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [291.859703] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [291.862994] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device

<7> [291.863520] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [291.865455] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [291.865945] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [291.866478] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [291.866916] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [291.867882] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [291.867903] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [291.867916] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [291.869041] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [291.869487] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [291.870643] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [291.871135] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [291.871148] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [291.871833] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9

<7> [291.872180] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9

<7> [291.872530] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9

<7> [291.872866] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0

<7> [291.873199] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0

<7> [291.873543] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2

<7> [291.873874] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21

<7> [291.874206] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000

<7> [291.874564] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE

<7> [291.874900] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48

<7> [291.875236] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2

<7> [291.875582] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39

<7> [291.875919] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no

<7> [291.876265] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no

<7> [291.876586] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no

<7> [291.876917] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes

<7> [291.877240] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no

<7> [291.877572] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no

<7> [291.877889] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes

<7> [291.878210] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes

<7> [291.878556] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no

<7> [291.878903] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no

<7> [291.879240] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no

<7> [291.879593] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes

<7> [291.879930] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no

<7> [291.880277] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no

<7> [291.880613] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no

<7> [291.880949] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no

<7> [291.881307] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no

<7> [291.881644] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no

<7> [291.881980] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes

<7> [291.882325] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes

<7> [291.882643] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no

<7> [291.882965] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no

<7> [291.883299] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no

<7> [291.883622] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no

<7> [291.883956] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no

<7> [291.884313] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no

<7> [291.884638] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no

<7> [291.884957] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no

<7> [291.885286] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes

<7> [291.885605] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no

<7> [291.885939] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes

<7> [291.886294] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes

<7> [291.886615] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no

<7> [291.886935] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes

<7> [291.887276] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no

<7> [291.887591] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no

<7> [291.887910] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no

<7> [291.888227] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no

<7> [291.888579] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled

<7> [291.888911] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403

<7> [291.889267] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001

<7> [291.889585] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3

<7> [291.889906] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007

<7> [291.890230] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000

<7> [291.890569] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000

<7> [291.890901] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24

<7> [291.891237] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8

<7> [291.891591] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no

<7> [291.891926] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no

<7> [291.892274] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes

<6> [291.892588] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [291.892592] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [291.892595] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [291.892609] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [291.896004] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [291.896019] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [291.896531] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [291.896549] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [291.896562] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [291.901091] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [291.901113] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [291.901126] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [291.901796] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [291.902135] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [291.902692] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [291.903075] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [291.903087] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [291.903448] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [291.907465] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [291.907480] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [291.907885] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [291.907900] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? yes

<7> [291.907910] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no

<7> [291.907919] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no

<7> [291.907928] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no

<7> [291.907937] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no

<7> [291.908809] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [291.908864] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] found preferred mode: 3200x1800

<7> [291.908875] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [291.908956] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:58:pipe A] desired mode 3200x1800 set (0,0)

<7> [291.909958] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:110:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [291.910383] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:109:DDI A/PHY A][CRTC:58:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [291.910732] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000

<7> [291.911071] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [291.911453] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:109:DDI A/PHY A] [CRTC:58:pipe A]

<7> [291.911796] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [291.912158] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [291.912551] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [291.912914] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [291.913302] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [291.913666] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [291.914028] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [291.914416] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [291.914774] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [291.915119] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [291.915498] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [291.915861] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [291.916224] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [291.916609] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [291.916971] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [291.917355] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [291.917716] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [291.918076] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [291.918458] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [291.918818] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [291.919060] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [291.919343] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [291.919696] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [291.920056] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [291.920450] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [291.920813] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [291.921175] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [291.921597] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [291.921958] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [291.922312] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [291.922644] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [291.922979] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [291.923374] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [291.923732] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [291.924093] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [291.924501] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dpll_hw_state

<7> [291.924834] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [291.925149] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0

<7> [291.925481] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [291.925845] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [291.926160] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [291.926478] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [291.926768] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [291.927055] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [291.927359] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset

<7> [291.928204] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [291.928595] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [291.928962] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [291.929359] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [291.929719] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [291.930084] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [291.930465] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [291.930922] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [291.931355] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [291.931736] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [291.932099] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [291.932472] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [291.932825] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:58:pipe A] allocated DPLL 0

<7> [291.933175] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:58:pipe A] reserving DPLL 0

<7> [291.933566] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: yes [modeset]

<7> [291.933887] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [291.934277] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [291.934634] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [291.934999] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [291.935378] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [291.935742] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [291.936109] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<6> [291.936474] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4

<7> [291.936502] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [291.936861] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [291.937218] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [291.937580] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [291.937881] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [291.938193] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [291.938555] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [291.938889] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [291.939270] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [291.939625] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [291.939984] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [291.940370] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [291.940729] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [291.941091] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [291.941486] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [291.941847] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [291.942197] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [291.942580] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [291.942917] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [291.943305] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [291.943668] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [291.944031] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [291.944420] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [291.944783] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [291.945144] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [291.945545] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [291.945900] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [291.946239] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [291.946621] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [291.946981] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [291.947366] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [291.947725] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [291.948086] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [291.948469] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [291.948831] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [291.949196] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [291.949582] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:111] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [291.949946] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [291.950318] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [291.950677] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [291.951038] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no

<7> [291.952181] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [291.953337] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A]

<7> [291.953695] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B]

<7> [291.954053] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A]

<7> [291.954436] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B]

<7> [291.954793] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C]

<7> [291.955156] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C]

<7> [291.955525] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A]

<7> [291.955883] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B]

<7> [291.956241] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C]

<7> [291.957207] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:58:pipe A]

<7> [291.957640] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [291.958728] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power on

<7> [291.959284] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [291.959678] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [291.970280] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [291.970557] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power on

<7> [291.970818] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000000b

<7> [292.173234] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [292.174532] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [292.176319] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [292.181207] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [292.182422] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [292.184701] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [292.185658] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [292.186729] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [292.190681] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Clock recovery OK

<7> [292.191678] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [292.192637] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [292.196030] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [292.196927] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [292.197900] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [292.201677] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [292.203183] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [292.206003] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [292.209074] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [292.210352] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [292.211827] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 37

<7> [292.216236] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 319 us, max time under evasion is 250 us

<7> [292.225948] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [292.232954] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1]

<7> [292.234442] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [292.237306] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp

<6> [292.244784] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])

<7> [292.245696] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [292.245772] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [292.245798] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [292.246102] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [292.246138] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [292.246914] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [292.250922] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [292.251522] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [292.252869] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [292.254207] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [292.255984] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [292.256029] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [292.256062] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [292.256182] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no

<7> [292.256907] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [292.257442] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [292.258809] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [292.268245] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes:

<7> [292.268329] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [292.268375] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [292.268422] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [292.268467] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [292.275301] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [292.275361] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [292.275404] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [292.278397] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.279720] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [292.281284] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.283141] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.283184] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.284711] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [292.290608] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.290653] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [292.292145] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [292.292199] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [292.292241] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [292.297906] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [292.297962] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [292.298004] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [292.299719] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.300593] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [292.301606] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.302518] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.302544] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.303428] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [292.307885] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.307909] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [292.308585] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [292.308610] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? yes

<7> [292.308627] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no

<7> [292.308643] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no

<7> [292.308658] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no

<7> [292.308673] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no

<7> [292.308766] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [292.308819] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] found preferred mode: 3200x1800

<7> [292.308836] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [292.310393] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:58:pipe A] desired mode 3200x1800 set (0,0)

<7> [292.310598] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [292.310734] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [292.310630] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [292.311715] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [292.312457] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [292.313094] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [292.316457] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [292.316476] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [292.316487] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [292.316551] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no

<7> [292.317010] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [292.317655] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [292.321325] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes:

<7> [292.321340] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [292.321352] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [292.321489] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [292.321500] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [292.325989] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [292.326173] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [292.326190] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [292.327793] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.328285] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [292.328870] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.329547] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.329562] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.330029] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [292.333595] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.333612] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [292.333956] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [292.334067] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [292.334076] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [292.337058] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [292.337537] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [292.337907] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [292.338538] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [292.338667] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [292.338680] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [292.338704] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [292.339085] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [292.339183] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.339440] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [292.339469] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [292.339900] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.339841] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [292.340147] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.340154] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.340211] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [292.340536] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [292.340619] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [292.343915] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.343930] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [292.344385] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [292.350847] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [292.350861] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [292.355208] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [292.356222] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [292.356238] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [292.356945] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.357433] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [292.357975] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.358332] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.358344] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.358645] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [292.361727] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.361740] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [292.362052] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [292.362932] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [292.362946] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [292.367450] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<6> [292.367880] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input40

<7> [292.368143] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [292.368154] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [292.369133] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.369555] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [292.370104] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.370532] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.370543] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.370892] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [292.374161] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.374173] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [292.374627] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [292.375390] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [292.375403] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<6> [292.375784] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input41

<7> [292.375842] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [292.376192] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [292.376576] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [292.377131] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [292.377144] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [292.377152] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [292.377194] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no

<7> [292.377562] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [292.377926] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [292.379519] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes:

<7> [292.379533] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [292.379545] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [292.379605] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [292.379616] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<6> [292.383371] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input42

<7> [292.384134] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [292.384202] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [292.384214] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [292.387073] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.387487] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [292.388022] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.388665] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.388677] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.389029] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [292.394830] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.394846] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [292.397475] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [292.397528] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [292.397540] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [292.402065] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [292.402109] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [292.402117] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [292.404494] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.404870] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [292.405403] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.405722] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.405733] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.406065] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [292.412178] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.412193] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [292.412741] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [292.413422] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:143]

<7> [293.465585] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:58:pipe A]

<7> [293.466021] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [293.466965] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [293.467705] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [293.467947] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [293.468188] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [293.468461] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [293.468743] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [293.468985] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [293.469224] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [293.469482] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [293.469761] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [293.470002] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [293.470242] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [293.470500] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [293.470792] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [293.471033] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [293.471313] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [293.471602] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [293.471843] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [293.472083] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [293.472348] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [293.472629] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [293.472868] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [293.473107] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [293.473362] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [293.473705] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [293.474003] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [293.474274] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [293.474568] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [293.474875] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [293.475126] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [293.475422] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [293.475779] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [293.476032] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [293.476312] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [293.476627] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [293.476877] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [293.477118] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [293.477391] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [293.477706] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset

<7> [293.477940] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0

<7> [293.478214] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [293.478494] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [293.478766] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [293.478992] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [293.479248] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [293.479508] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [293.479757] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [293.480041] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [293.480333] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz

<7> [293.480611] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [293.480893] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [293.481276] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [293.481645] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset]

<7> [293.482008] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no

<7> [293.482382] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [293.482748] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no

<7> [293.483185] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [293.484786] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [293.660501] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [293.692634] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0

<7> [293.695316] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [293.711491] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off

<7> [293.711972] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [293.712315] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [293.713168] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [293.713094] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short

<7> [293.764178] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [293.764573] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [293.765644] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long

<7> [293.765756] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [293.766943] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [293.767401] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [293.767776] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A]

<7> [293.769313] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [293.769591] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [293.770961] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [293.773663] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A]

<7> [293.775161] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B]

<7> [293.776533] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A]

<7> [293.777856] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B]

<7> [293.779197] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C]

<7> [293.780241] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C]

<7> [293.781225] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A]

<7> [293.782150] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B]

<7> [293.783021] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C]

<7> [293.783961] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1]

<7> [293.785691] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [293.788323] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:83:pipe B]

<7> [293.789425] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:108:pipe C]

<7> [293.892735] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [293.894347] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [293.895305] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [293.896603] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [293.898708] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [293.916313] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [294.004001] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:110:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [294.004969] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:109:DDI A/PHY A][CRTC:58:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [294.005811] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000

<7> [294.006954] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [294.008048] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:109:DDI A/PHY A] [CRTC:58:pipe A]

<7> [294.008912] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [294.009954] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [294.010838] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [294.011995] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [294.013120] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [294.014730] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [294.015989] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [294.017064] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [294.017950] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [294.019016] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [294.019920] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [294.020981] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [294.022349] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [294.023387] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [294.024227] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [294.025148] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [294.026197] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [294.027224] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [294.028303] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [294.029152] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [294.030166] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [294.031185] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [294.032346] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [294.033715] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [294.035068] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [294.036423] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [294.037770] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [294.038798] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [294.039759] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [294.041096] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [294.042441] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [294.043759] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [294.045158] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [294.046487] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [294.047759] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [294.048804] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [294.049730] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [294.050699] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [294.051576] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [294.052532] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset

<7> [294.053712] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [294.054616] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [294.055491] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [294.056715] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [294.057668] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [294.058765] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [294.059644] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [294.060886] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [294.061909] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [294.062914] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [294.063814] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [294.064892] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [294.065856] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:58:pipe A] allocated DPLL 0

<7> [294.067209] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:58:pipe A] reserving DPLL 0

<7> [294.068570] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: yes [modeset]

<7> [294.069910] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [294.071221] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [294.072577] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [294.073580] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [294.074537] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [294.075874] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [294.077203] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [294.078553] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [294.079884] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [294.081183] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [294.082233] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [294.083438] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [294.084784] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [294.086128] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [294.087460] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [294.088777] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [294.090019] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [294.090925] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [294.091994] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [294.092866] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [294.093899] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [294.094798] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [294.095858] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [294.096769] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [294.097800] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [294.098682] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [294.099932] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [294.101022] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [294.102085] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [294.102982] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [294.104014] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [294.104885] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [294.105908] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [294.106797] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [294.107830] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [294.108954] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [294.109957] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [294.110861] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [294.111810] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [294.112679] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [294.113621] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [294.114598] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [294.115617] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [294.116520] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:111] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [294.117642] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [294.118896] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [294.120246] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [294.121577] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no

<7> [294.134390] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [294.145729] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [294.146065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [294.146749] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [294.147528] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [294.148382] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [294.149317] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A]

<7> [294.149630] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B]

<7> [294.149919] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A]

<7> [294.150189] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B]

<7> [294.150485] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C]

<7> [294.150781] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C]

<7> [294.151050] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A]

<7> [294.151356] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B]

<7> [294.151642] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C]

<7> [294.152154] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:58:pipe A]

<7> [294.152520] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [294.153029] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power on

<7> [294.153464] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (112 ms remaining)

<7> [294.268701] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [294.278395] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [294.278830] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power on

<7> [294.279291] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003

<7> [294.328630] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [294.329615] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long

<7> [294.330507] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [294.331491] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [294.487863] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [294.489164] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [294.490499] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [294.493557] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on

<7> [294.495186] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b

<7> [294.502554] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [294.503377] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [294.506760] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [294.508219] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [294.509558] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [294.514413] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Clock recovery OK

<7> [294.515745] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [294.517063] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [294.520739] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [294.522203] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [294.523560] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [294.527649] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [294.529108] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [294.531610] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [294.534837] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [294.536150] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [294.538003] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 37

<7> [294.542253] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 328 us, max time under evasion is 250 us

<7> [294.550665] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [294.557190] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1]

<7> [294.559037] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [294.564500] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [294.565857] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [294.573153] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [294.574707] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [294.575745] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [294.577048] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [294.578450] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [294.578487] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [294.579629] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [294.587471] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [294.587513] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [294.590052] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [294.595819] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [294.597626] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [294.598923] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [294.601049] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [294.602606] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [294.602645] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [294.604496] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [294.610461] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [294.610489] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [294.705830] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [294.706641] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [294.719403] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [294.744958] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [294.745368] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [294.758094] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [294.823956] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [294.825813] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [294.834314] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [294.834787] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [294.835195] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [294.835888] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [294.836559] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [294.837195] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [294.837850] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [294.838546] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [294.839402] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [294.841108] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [294.929744] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [294.930891] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [294.931411] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [294.932163] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<6> [294.936777] Console: switching to colour dummy device 80x25

<7> [294.937194] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:111] is removed

<7> [294.937417] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [294.938191] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [294.938970] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [294.939721] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [294.940448] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [294.942355] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [294.950865] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [294.955829] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [294.956528] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [294.957165] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [294.957818] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [294.958458] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [294.959079] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [294.959774] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [294.960414] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [294.960915] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [294.961456] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [294.961972] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [294.962620] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [294.963090] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [294.963733] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [294.964241] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [294.964752] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [294.965277] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [294.965845] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [294.966767] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [294.967433] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [294.968173] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [294.968932] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [294.969614] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [294.970345] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [294.971078] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [294.971741] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [294.972248] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [294.972906] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [294.973734] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [294.974499] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [294.975237] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [294.975968] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [294.976604] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [294.977071] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [294.977699] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [294.978461] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [294.979199] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [294.979957] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [294.980708] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [294.981398] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset

<7> [294.981961] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0

<7> [294.982651] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [294.983183] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [294.983843] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [294.984360] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [294.984818] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [294.985304] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [294.985806] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset]

<7> [294.986310] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no

<7> [294.986804] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [294.987445] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no

<7> [294.988742] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [295.196745] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0

<7> [295.199061] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [295.220980] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off

<7> [295.221509] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [295.221979] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [295.222585] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short

<7> [295.223010] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [295.274557] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [295.275847] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long

<7> [295.277032] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [295.280387] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [295.282861] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [295.284571] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [295.287025] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A]

<7> [295.290654] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [295.292415] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [295.295909] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A]

<7> [295.297690] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B]

<7> [295.299314] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A]

<7> [295.300947] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B]

<7> [295.302606] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C]

<7> [295.304146] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C]

<7> [295.305719] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A]

<7> [295.307306] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B]

<7> [295.308879] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C]

<7> [295.310429] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1]

<7> [295.313522] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [295.392153] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [295.439372] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:110:eDP-1] removing connector from sysfs

<7> [295.471322] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:118:DP-1] removing connector from sysfs

<7> [295.482225] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:127:HDMI-A-1] removing connector from sysfs

<7> [295.495062] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:133:DP-2] removing connector from sysfs

<7> [295.500772] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:139:HDMI-A-2] removing connector from sysfs

<7> [295.530483] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (252 ms remaining)

<7> [295.788861] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [295.799462] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<6> [296.435127] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS

<6> [296.437123] [IGT] i915_pm_rpm: exiting, ret=0

Results for igt@i915_pm_rpm@module-reload