Results for igt@kms_plane_scaling@plane-upscale-20x20-with-rotation

Result: Pass

git-log-oneline i915_display_info9 igt_runner9 runtimes9 results9.json results9-i915-load.json guc_logs9.tar i915_display_info_post_exec9 boot9 dmesg9

DetailValue
Duration 4.16 seconds
Hostname
shard-mtlp-6
Igt-Version
IGT-Version: 2.3-gc49da3be7 (x86_64) (Linux: 6.19.0-CI_DRM_17961-g5e0595fbb024+ x86_64)
Out
Using IGT_SRANDOM=1770681715 for randomisation
Opened device: /dev/dri/card0
Starting subtest: plane-upscale-20x20-with-rotation
Starting dynamic subtest: pipe-A
Trying on eDP-1
Dynamic subtest pipe-A: SUCCESS (0.227s)
Starting dynamic subtest: pipe-B
Trying on eDP-1
Dynamic subtest pipe-B: SUCCESS (1.275s)
Starting dynamic subtest: pipe-C
Trying on eDP-1
Dynamic subtest pipe-C: SUCCESS (1.332s)
Starting dynamic subtest: pipe-D
Trying on eDP-1
Dynamic subtest pipe-D: SUCCESS (1.326s)
Subtest plane-upscale-20x20-with-rotation: SUCCESS (4.164s)
Err
Starting subtest: plane-upscale-20x20-with-rotation
Starting dynamic subtest: pipe-A
Dynamic subtest pipe-A: SUCCESS (0.227s)
Starting dynamic subtest: pipe-B
Dynamic subtest pipe-B: SUCCESS (1.275s)
Starting dynamic subtest: pipe-C
Dynamic subtest pipe-C: SUCCESS (1.332s)
Starting dynamic subtest: pipe-D
Dynamic subtest pipe-D: SUCCESS (1.326s)
Subtest plane-upscale-20x20-with-rotation: SUCCESS (4.164s)
Dmesg
<6> [412.460736] Console: switching to colour dummy device 80x25
<6> [412.461074] [IGT] kms_plane_scaling: executing
<7> [412.468758] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [412.471449] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [412.477460] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [412.477997] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [412.478519] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [412.493655] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [412.503466] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1]
<7> [412.503474] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:516:DP-1]
<7> [412.508080] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] disconnected
<7> [412.508338] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [412.508341] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [412.512539] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<7> [412.512775] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2]
<7> [412.512778] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:534:DP-2]
<7> [412.513105] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [412.513657] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected
<7> [412.513889] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:HDMI-A-2]
<7> [412.513893] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:543:HDMI-A-2]
<7> [412.514362] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4
<7> [412.518897] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:HDMI-A-2] disconnected
<7> [412.519139] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:547:DP-3]
<7> [412.519142] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:547:DP-3]
<7> [412.519468] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [412.520038] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:547:DP-3] disconnected
<7> [412.520272] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:556:DP-4]
<7> [412.520275] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:556:DP-4]
<7> [412.520670] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [412.521251] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:556:DP-4] disconnected
<7> [412.521555] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1]
<7> [412.521559] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1]
<7> [412.521838] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [412.521976] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [412.522482] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turning VDD on
<7> [412.522713] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7> [412.523280] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [412.523687] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [412.523802] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [412.523917] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [412.524058] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [412.524063] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor
<7> [412.524065] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0
<7> [412.524082] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: no
<7> [412.524194] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [412.524307] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [412.525054] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes:
<7> [412.525059] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [412.525072] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1]
<7> [412.525076] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:516:DP-1]
<7> [412.529238] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] disconnected
<7> [412.529248] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [412.529252] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [412.533437] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<7> [412.533448] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2]
<7> [412.533451] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:534:DP-2]
<7> [412.533685] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected
<7> [412.533693] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:HDMI-A-2]
<7> [412.533696] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:543:HDMI-A-2]
<7> [412.537988] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:HDMI-A-2] disconnected
<7> [412.537998] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:547:DP-3]
<7> [412.538001] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:547:DP-3]
<7> [412.538224] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:547:DP-3] disconnected
<7> [412.538232] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:556:DP-4]
<7> [412.538235] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:556:DP-4]
<7> [412.538476] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:556:DP-4] disconnected
<6> [412.538728] [IGT] kms_plane_scaling: starting subtest plane-upscale-20x20-with-rotation
<6> [412.539184] [IGT] kms_plane_scaling: starting dynamic subtest pipe-A
<7> [412.540341] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:579]
<7> [412.541061] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:150:pipe A] scaler_user index 0.0: staged scaling request for 20x20->2880x1800 scaler_users = 0x1
<7> [412.541220] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [412.541362] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [412.541491] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [412.541616] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [412.541748] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:34
<7> [412.555549] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [412.556174] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:579] from all active usage due to RMFB ioctl
<7> [412.556257] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:579] is removed
<7> [412.556306] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:150:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0
<7> [412.556798] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [412.557147] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [412.557416] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [412.557677] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [412.557933] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [412.558210] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [412.558433] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [412.558639] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [412.558842] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [412.559044] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [412.559246] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [412.559515] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [412.566207] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:579]
<7> [412.566302] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:150:pipe A] scaler_user index 0.0: staged scaling request for 20x20->2880x1800 scaler_users = 0x1
<7> [412.566549] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [412.566752] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [412.566944] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [412.567136] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [412.567335] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [412.567548] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 2055280 num active planes 1
<7> [412.567817] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:150:pipe A] scaler_user index 0.0: staged scaling request for 20x20->2880x1800 scaler_users = 0x1
<7> [412.568016] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [412.568204] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [412.568412] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [412.568598] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [412.568781] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [412.568972] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 2055280 num active planes 1
<7> [412.569223] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:150:pipe A] scaler_user index 0.0: staged scaling request for 20x20->2880x1800 scaler_users = 0x1
<7> [412.569427] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [412.569612] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [412.569794] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [412.569977] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [412.570159] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [412.570376] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 2055280 num active planes 1
<7> [412.570672] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [412.570952] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [412.571211] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [412.571458] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [412.571682] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [412.571938] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:34
<7> [412.577077] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [412.578607] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:579] from all active usage due to RMFB ioctl
<7> [412.578651] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:579] is removed
<7> [412.578675] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:150:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0
<7> [412.578914] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [412.579116] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [412.579310] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [412.579521] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [412.579724] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [412.579937] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [412.580234] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [412.580472] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [412.580678] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [412.580880] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [412.581080] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [412.581347] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [412.588386] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:579]
<7> [412.588492] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:150:pipe A] scaler_user index 0.1: staged scaling request for 20x20->2880x1800 scaler_users = 0x2
<7> [412.588711] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:64:plane 2A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [412.588905] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [412.589094] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [412.589282] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [412.589484] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [412.589787] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 2055280 num active planes 1
<7> [412.590056] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:150:pipe A] scaler_user index 0.1: staged scaling request for 20x20->2880x1800 scaler_users = 0x2
<7> [412.590198] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:64:plane 2A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [412.590334] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [412.590458] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [412.590583] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [412.590706] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [412.590833] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 2055280 num active planes 1
<7> [412.590999] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:150:pipe A] scaler_user index 0.1: staged scaling request for 20x20->2880x1800 scaler_users = 0x2
<7> [412.591124] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:64:plane 2A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [412.591242] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [412.591391] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [412.591512] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [412.591631] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [412.591754] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 2055280 num active planes 1
<7> [412.591886] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [412.592014] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [412.592145] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [412.592276] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [412.592427] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [412.592572] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:64
<7> [412.599297] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [412.601180] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:579] from all active usage due to RMFB ioctl
<7> [412.601276] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:64:plane 2A] because [FB:579] is removed
<7> [412.601359] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:150:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0
<7> [412.601820] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:64:plane 2A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [412.602311] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [412.602802] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [412.603364] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [412.603760] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [412.604025] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [412.604296] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [412.604573] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [412.604836] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [412.605052] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [412.605254] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [412.605522] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [412.610695] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:579]
<7> [412.610788] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:150:pipe A] scaler_user index 0.1: staged scaling request for 20x20->2880x1800 scaler_users = 0x2
<7> [412.611022] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:64:plane 2A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [412.611225] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [412.611433] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [412.611646] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [412.611838] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [412.612080] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 2055280 num active planes 1
<7> [412.612239] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [412.612388] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [412.612518] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [412.612645] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [412.612771] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [412.612923] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:64
<7> [412.621518] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [412.622903] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:579] from all active usage due to RMFB ioctl
<7> [412.622943] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:64:plane 2A] because [FB:579] is removed
<7> [412.622965] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:150:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0
<7> [412.623187] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:64:plane 2A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [412.623404] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [412.623599] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [412.623789] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [412.623976] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [412.624177] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [412.624393] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [412.624598] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [412.624801] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [412.625002] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [412.625201] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [412.625457] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [412.632799] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:579]
<7> [412.632907] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:150:pipe A] scaler_user index 0.2: staged scaling request for 20x20->2880x1800 scaler_users = 0x4
<7> [412.633121] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:94:plane 3A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [412.633324] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [412.633518] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [412.633705] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [412.633892] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [412.634129] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 2055280 num active planes 1
<7> [412.634287] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [412.634436] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [412.634566] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [412.634695] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [412.634826] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [412.634980] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:94
<7> [412.643728] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [412.645173] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:579] from all active usage due to RMFB ioctl
<7> [412.645197] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:94:plane 3A] because [FB:579] is removed
<7> [412.645211] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:150:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0
<7> [412.645374] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:94:plane 3A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [412.645502] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [412.645623] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [412.645745] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [412.645867] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [412.646000] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [412.646130] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [412.646263] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [412.646407] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [412.646536] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [412.646666] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [412.646829] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [412.655006] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:579]
<7> [412.655059] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:150:pipe A] scaler_user index 0.2: staged scaling request for 20x20->2880x1800 scaler_users = 0x4
<7> [412.655196] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:94:plane 3A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [412.655334] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [412.655458] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [412.655576] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [412.655691] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [412.655818] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 2055280 num active planes 1
<7> [412.655952] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [412.656082] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [412.656214] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [412.656355] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [412.656487] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [412.656641] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:94
<7> [412.665953] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [412.667221] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:579] from all active usage due to RMFB ioctl
<7> [412.667246] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:94:plane 3A] because [FB:579] is removed
<7> [412.667260] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:150:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0
<7> [412.667418] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:94:plane 3A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [412.667544] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [412.667669] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [412.667791] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [412.667910] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [412.668033] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [412.668166] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [412.668296] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [412.668439] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [412.668567] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [412.668694] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [412.668851] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [412.677206] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:579]
<7> [412.677268] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:150:pipe A] scaler_user index 0.3: staged scaling request for 20x20->2880x1800 scaler_users = 0x8
<7> [412.677434] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:124:plane 4A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [412.677561] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [412.677678] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [412.677794] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [412.677909] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [412.678030] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 2055280 num active planes 1
<7> [412.678164] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [412.678290] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [412.678429] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [412.678554] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [412.678680] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [412.678823] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:124
<7> [412.688177] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [412.689503] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:579] from all active usage due to RMFB ioctl
<7> [412.689532] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:124:plane 4A] because [FB:579] is removed
<7> [412.689545] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:150:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0
<7> [412.689674] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:124:plane 4A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [412.689794] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [412.689910] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [412.690027] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [412.690143] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [412.690268] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [412.690428] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [412.690555] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [412.690682] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [412.690809] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [412.690936] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [412.691094] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [412.699484] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:579]
<7> [412.699541] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:150:pipe A] scaler_user index 0.3: staged scaling request for 20x20->2880x1800 scaler_users = 0x8
<7> [412.699677] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:124:plane 4A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [412.699806] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [412.699928] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [412.700048] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [412.700171] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [412.700300] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 2055280 num active planes 1
<7> [412.700453] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [412.700583] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [412.700713] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [412.700846] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [412.700974] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [412.701120] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:124
<7> [412.710383] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [412.711625] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:579] from all active usage due to RMFB ioctl
<7> [412.711652] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:124:plane 4A] because [FB:579] is removed
<7> [412.711664] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:150:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0
<7> [412.711805] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:124:plane 4A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [412.711932] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [412.712050] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [412.712167] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [412.712284] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [412.712426] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [412.712557] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [412.712686] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [412.712814] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [412.712940] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [412.713065] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [412.713226] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [412.721598] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:579]
<7> [412.721669] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:150:pipe A] scaler_user index 0.4: staged scaling request for 20x20->2880x1800 scaler_users = 0x10
<7> [412.721802] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:134:plane 5A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [412.721923] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [412.722044] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [412.722162] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [412.722286] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [412.722452] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 2055280 num active planes 1
<7> [412.722695] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:150:pipe A] scaler_user index 0.4: staged scaling request for 20x20->2880x1800 scaler_users = 0x10
<7> [412.722856] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:134:plane 5A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [412.722981] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [412.723114] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [412.723238] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [412.723375] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [412.723505] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 2055280 num active planes 1
<7> [412.723639] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [412.723769] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [412.723897] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [412.724022] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [412.724147] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [412.724297] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:134
<7> [412.732591] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [412.733901] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:579] from all active usage due to RMFB ioctl
<7> [412.733927] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:134:plane 5A] because [FB:579] is removed
<7> [412.733940] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:150:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0
<7> [412.734077] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:134:plane 5A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [412.734212] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [412.734362] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [412.734580] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [412.734705] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [412.734830] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [412.734958] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [412.735086] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [412.735211] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [412.735346] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [412.735468] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [412.735624] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [412.743895] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:579]
<7> [412.743952] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:150:pipe A] scaler_user index 0.4: staged scaling request for 20x20->2880x1800 scaler_users = 0x10
<7> [412.744088] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:134:plane 5A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [412.744210] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [412.744350] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [412.744555] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [412.744729] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [412.744909] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 2055280 num active planes 1
<7> [412.745099] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:150:pipe A] scaler_user index 0.4: staged scaling request for 20x20->2880x1800 scaler_users = 0x10
<7> [412.745231] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:134:plane 5A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [412.745366] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [412.745486] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [412.745606] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [412.745725] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [412.745849] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 2055280 num active planes 1
<7> [412.745999] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:150:pipe A] scaler_user index 0.4: staged scaling request for 20x20->2880x1800 scaler_users = 0x10
<7> [412.746123] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:134:plane 5A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [412.746239] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [412.746370] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [412.746484] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [412.746599] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [412.746717] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 2055280 num active planes 1
<7> [412.746841] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [412.746966] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [412.747155] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [412.747393] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [412.747566] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [412.747779] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:134
<7> [412.754843] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [412.756785] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:579] from all active usage due to RMFB ioctl
<7> [412.756875] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:134:plane 5A] because [FB:579] is removed
<7> [412.756924] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:150:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0
<7> [412.757510] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:134:plane 5A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [412.758017] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [412.758508] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [412.758938] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [412.759260] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [412.759625] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [412.759983] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [412.760280] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [412.760493] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [412.760696] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [412.760897] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [412.761147] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<6> [412.766637] [IGT] kms_plane_scaling: finished subtest pipe-A, SUCCESS
<6> [412.767343] [IGT] kms_plane_scaling: starting dynamic subtest pipe-B
<7> [412.769112] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:579]
<7> [412.770166] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:507:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [412.770425] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:506:DDI A/PHY A][CRTC:268:pipe B] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [412.770624] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 link rate required 1926825 available 2160000
<7> [412.770823] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:268:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [412.771036] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:506:DDI A/PHY A] [CRTC:268:pipe B]
<7> [412.771226] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.enable (expected yes, found no)
<7> [412.771444] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no)
<7> [412.771649] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)
<7> [412.771853] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in lane_count (expected 4, found 0)
<7> [412.772054] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 498869/524288, found tu 0, data 0/0 link 0/0)
<7> [412.772255] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [412.772459] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [412.772660] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)
<7> [412.772860] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)
<7> [412.773063] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)
<7> [412.773265] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)
<7> [412.773471] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)
<7> [412.773675] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)
<7> [412.773876] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)
<7> [412.774079] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1801, found 0)
<7> [412.774282] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)
<7> [412.774502] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)
<7> [412.774708] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1878, found 0)
<7> [412.774912] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1878, found 0)
<7> [412.775113] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)
<7> [412.775331] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)
<7> [412.775533] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)
<7> [412.775731] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)
<7> [412.775929] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)
<7> [412.776128] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)
<7> [412.776341] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)
<7> [412.776543] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1801, found 0)
<7> [412.776742] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)
<7> [412.776941] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)
<7> [412.777141] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1878, found 0)
<7> [412.777350] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1878, found 0)
<7> [412.777551] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [412.777750] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [412.777949] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [412.778148] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)
<7> [412.778361] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [412.778561] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 513820, found 0)
<7> [412.778760] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 513820, found 0)
<7> [412.778958] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)
<7> [412.779158] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in set_context_latency (expected 1, found 0)
<7> [412.779368] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset
<7> [412.779568] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.enable (expected no, found yes)
<7> [412.779767] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes)
<7> [412.779967] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in cpu_transcoder (expected -1, found 1)
<7> [412.780165] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in lane_count (expected 0, found 4)
<7> [412.780380] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 7483046/8388608 link 498869/524288)
<7> [412.780580] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [412.780779] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [412.780976] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)
<7> [412.781173] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)
<7> [412.781384] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)
<7> [412.781582] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)
<7> [412.781781] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)
<7> [412.781980] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)
<7> [412.782178] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)
<7> [412.782390] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1801)
<7> [412.782590] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)
<7> [412.782789] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)
<7> [412.782992] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1878)
<7> [412.783192] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1878)
<7> [412.783414] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)
<7> [412.783615] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)
<7> [412.783813] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)
<7> [412.784012] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)
<7> [412.784210] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)
<7> [412.784423] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)
<7> [412.784625] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)
<7> [412.784822] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1801)
<7> [412.785020] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)
<7> [412.785217] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)
<7> [412.785426] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1878)
<7> [412.785628] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1878)
<7> [412.785827] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [412.786026] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [412.786227] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [412.786432] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in enhanced_framing (expected no, found yes)
<7> [412.786632] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [412.786832] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 513820)
<7> [412.787031] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 513820)
<7> [412.787231] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in port_clock (expected 0, found 540000)
<7> [412.787437] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in set_context_latency (expected 0, found 1)
<7> [412.787636] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset
<7> [412.787837] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:150:pipe A] releasing DPLL 0
<7> [412.788050] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:268:pipe B] scaler_user index 1.6: staged scaling request for 20x20->2880x1800 scaler_users = 0x40
<7> [412.788329] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:150:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x2
<7> [412.788854] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:268:pipe B] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x1 -> 0x2
<7> [412.789336] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:144:cursor A] ddb (4001 - 4096) -> ( 0 - 0), size 95 -> 0
<7> [412.789774] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [412.790201] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:262:cursor B] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95
<7> [412.790677] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [412.791073] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [412.791336] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [412.791591] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [412.791865] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:268:pipe B] data rate 2055280 num active planes 1
<7> [412.792139] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [412.792430] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [412.792711] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [412.792956] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [412.793090] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [412.793235] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:150:pipe A] min cdclk: 256910 kHz -> 0 kHz
<7> [412.793380] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:268:pipe B] min cdclk: 0 kHz -> 256910 kHz
<7> [412.793544] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:268:pipe B] allocated DPLL 0
<7> [412.793680] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:268:pipe B] reserving DPLL 0
<7> [412.793814] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:152
<7> [412.793940] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:150:pipe A] enable: no [modeset]
<7> [412.794075] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no
<7> [412.794211] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 2A] fb: [NOFB], visible: no
<7> [412.794354] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 3A] fb: [NOFB], visible: no
<7> [412.794486] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:124:plane 4A] fb: [NOFB], visible: no
<7> [412.794616] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:134:plane 5A] fb: [NOFB], visible: no
<7> [412.794745] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:144:cursor A] fb: [NOFB], visible: no
<7> [412.794873] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:268:pipe B] enable: yes [modeset]
<7> [412.795002] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [412.795129] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: B, pipe bpp: 30, dithering: 0
<7> [412.795255] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>
<7> [412.795394] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [412.795525] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0
<7> [412.795656] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0
<7> [412.795780] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64
<7> [412.795910] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [412.796040] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled
<7> [412.796171] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled
<7> [412.796306] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [412.796437] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0
<7> [412.796568] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [412.796700] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 4, length 14
<7> [412.796830] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB
<7> [412.796960] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB
<7> [412.797090] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0
<7> [412.797216] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range
<7> [412.797354] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined
<7> [412.797487] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1
<7> [412.797615] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 1
<7> [412.797747] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1878, vmax: 1878, flipline: 1878, pipeline full: 0, guardband: 76 vsync start: 75, vsync end: 69
<7> [412.797880] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1878, vmax vtotal: 1878
<7> [412.798032] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [412.798208] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [412.798349] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [412.798476] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa
<7> [412.798605] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa
<7> [412.798735] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa
<7> [412.798865] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820, min cdclk 256910
<7> [412.798993] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0
<7> [412.799125] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x40, scaler_id: -1, scaling_filter: 0
<7> [412.799251] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [412.799388] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0
<7> [412.799522] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [412.799655] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: fracen: yes,
<7> [412.799787] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] quot: 40960, rem: 0, den: 1,
<7> [412.799915] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 140, tx_clk_div: 0.
<7> [412.800041] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state:
<7> [412.800166] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21
<7> [412.800300] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7> [412.800425] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [412.800552] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [412.800679] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7> [412.800808] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7> [412.800942] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [412.801074] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [412.801203] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [412.801340] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [412.801471] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [412.801604] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [412.801738] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [412.801869] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [412.801998] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [412.802126] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [412.802253] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [412.802392] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [412.802521] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [412.802648] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:152:plane 1B] fb: [FB:579] 20x20 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [412.802783] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: 0, scaling_filter: 0
<7> [412.802914] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 20.000000x20.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [412.803041] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:182:plane 2B] fb: [NOFB], visible: no
<7> [412.803168] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:212:plane 3B] fb: [NOFB], visible: no
<7> [412.803300] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:242:plane 4B] fb: [NOFB], visible: no
<7> [412.803431] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:252:plane 5B] fb: [NOFB], visible: no
<7> [412.803560] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:262:cursor B] fb: [NOFB], visible: no
<7> [412.805080] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [412.805238] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B
<7> [412.805449] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa0000000)
<7> [412.805822] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]
<7> [413.013671] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:507:eDP-1] set backlight PWM = 0
<7> [413.014655] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A
<7> [413.022956] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turn panel power off
<7> [413.023272] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000
<7> [413.023504] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [413.023830] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:506:DDI A/PHY A] - short
<7> [413.024044] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [413.074789] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [413.075401] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:150:pipe A]
<7> [413.075570] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:506:DDI A/PHY A]
<7> [413.076012] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [413.076566] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:506:DDI A/PHY A] - long
<7> [413.077014] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0
<7> [413.077081] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [413.077628] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A
<7> [413.077675] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:506:DDI A/PHY A]
<7> [413.078109] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:506:DDI A/PHY A]
<7> [413.078448] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:515:DDI B/PHY B]
<7> [413.078769] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:517:DP-MST A]
<7> [413.079032] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:518:DP-MST B]
<7> [413.079237] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:519:DP-MST C]
<7> [413.079439] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:520:DP-MST D]
<7> [413.079778] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:533:DDI TC1/PHY TC1]
<7> [413.079973] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:535:DP-MST A]
<7> [413.080200] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:536:DP-MST B]
<7> [413.080329] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:537:DP-MST C]
<7> [413.080457] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:538:DP-MST D]
<7> [413.080579] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:542:DDI TC2/PHY TC2]
<7> [413.080742] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:546:DDI TC3/PHY TC3]
<7> [413.080888] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:548:DP-MST A]
<7> [413.081030] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:549:DP-MST B]
<7> [413.081168] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:550:DP-MST C]
<7> [413.081297] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:551:DP-MST D]
<7> [413.081423] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:555:DDI TC4/PHY TC4]
<7> [413.081546] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:557:DP-MST A]
<7> [413.081664] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:558:DP-MST B]
<7> [413.081783] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:559:DP-MST C]
<7> [413.081904] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:560:DP-MST D]
<7> [413.082023] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:516:DP-1]
<7> [413.082167] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [413.082320] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:534:DP-2]
<7> [413.082466] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:543:HDMI-A-2]
<7> [413.082608] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:547:DP-3]
<7> [413.082748] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:556:DP-4]
<7> [413.082935] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 4 (mbus joined: yes)
<7> [413.083134] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A
<7> [413.084323] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x2, on? 0) for [CRTC:268:pipe B]
<7> [413.084485] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0
<7> [413.086134] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turn panel power on
<7> [413.086289] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 wait for panel power cycle (489 ms remaining)
<7> [413.573737] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [413.573737] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [413.574868] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4
<7> [413.574833] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [413.581533] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [413.602189] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [413.602784] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 wait for panel power on
<7> [413.603310] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [413.634511] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [413.635061] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:506:DDI A/PHY A] - long
<7> [413.635380] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [413.635684] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:506:DDI A/PHY A]
<7> [413.808514] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [413.809235] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turning VDD on
<7> [413.809778] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [413.812850] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80
<7> [413.814071] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [413.814711] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07
<7> [413.815794] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [413.816832] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [413.817936] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Clock recovery OK
<7> [413.818181] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Using DP training pattern TPS3
<7> [413.819530] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [413.819655] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4
<7> [413.820236] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe B
<7> [413.820476] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]
<7> [413.820598] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe B
<7> [413.820774] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:507:eDP-1] set backlight PWM = 13892
<7> [413.831649] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_A
<7> [413.831811] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa2000000)
<7> [413.832002] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:150:pipe A]
<7> [413.832144] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [413.833740] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:507:eDP-1]
<7> [413.833926] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:268:pipe B]
<7> [413.836607] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe B
<7> [413.836798] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:579] from all active usage due to RMFB ioctl
<7> [413.836831] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:152:plane 1B] because [FB:579] is removed
<7> [413.836852] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:268:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0
<7> [413.837000] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:152:plane 1B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [413.837131] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [413.837280] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:152:plane 1B] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [413.837414] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:152:plane 1B] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [413.837539] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:152:plane 1B] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [413.837671] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [413.837801] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [413.837929] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [413.838055] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [413.838192] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [413.838337] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [413.838504] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [413.843042] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:580]
<7> [413.843131] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:268:pipe B] scaler_user index 1.6: staged scaling request for 20x20->2880x1800 scaler_users = 0x40
<7> [413.843316] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [413.843476] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [413.843597] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [413.843717] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [413.843840] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [413.843977] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:268:pipe B] data rate 2055280 num active planes 1
<7> [413.844113] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [413.844278] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [413.844406] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [413.844534] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [413.844661] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [413.844816] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:152
<7> [413.853866] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [413.855198] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:580] from all active usage due to RMFB ioctl
<7> [413.855223] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:152:plane 1B] because [FB:580] is removed
<7> [413.855238] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:268:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0
<7> [413.855385] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:152:plane 1B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [413.855521] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [413.855648] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:152:plane 1B] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [413.855769] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:152:plane 1B] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [413.855886] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:152:plane 1B] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [413.856013] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [413.856141] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [413.856294] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [413.856426] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [413.856556] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [413.856691] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [413.856863] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [413.865133] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:580]
<7> [413.865234] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:268:pipe B] scaler_user index 1.7: staged scaling request for 20x20->2880x1800 scaler_users = 0x80
<7> [413.865430] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:182:plane 2B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [413.865604] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:182:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [413.865747] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:182:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [413.865878] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:182:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [413.866001] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:182:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [413.866131] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:268:pipe B] data rate 2055280 num active planes 1
<7> [413.866285] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [413.866418] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [413.866547] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [413.866675] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [413.866799] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [413.866940] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:182
<7> [413.876092] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [413.877410] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:580] from all active usage due to RMFB ioctl
<7> [413.877451] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:182:plane 2B] because [FB:580] is removed
<7> [413.877469] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:268:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0
<7> [413.877657] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:182:plane 2B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [413.877800] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:182:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [413.877923] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:182:plane 2B] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [413.878045] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:182:plane 2B] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [413.878204] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:182:plane 2B] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [413.878337] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [413.878466] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [413.878594] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [413.878725] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [413.878852] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [413.878978] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [413.879129] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [413.887348] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:580]
<7> [413.887403] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:268:pipe B] scaler_user index 1.7: staged scaling request for 20x20->2880x1800 scaler_users = 0x80
<7> [413.887538] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:182:plane 2B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [413.887661] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:182:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [413.887779] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:182:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [413.887897] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:182:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [413.888018] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:182:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [413.888144] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:268:pipe B] data rate 2055280 num active planes 1
<7> [413.888300] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [413.888486] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [413.888735] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [413.888948] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [413.889094] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [413.889261] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:182
<7> [413.898280] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [413.899909] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:580] from all active usage due to RMFB ioctl
<7> [413.899995] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:182:plane 2B] because [FB:580] is removed
<7> [413.900037] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:268:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0
<7> [413.900617] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:182:plane 2B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [413.901072] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:182:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [413.901553] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:182:plane 2B] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [413.901981] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:182:plane 2B] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [413.902315] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:182:plane 2B] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [413.902645] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [413.902984] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [413.903339] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [413.903668] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [413.903868] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [413.904020] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [413.905256] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [413.909641] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:580]
<7> [413.909720] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:268:pipe B] scaler_user index 1.8: staged scaling request for 20x20->2880x1800 scaler_users = 0x100
<7> [413.909877] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:212:plane 3B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [413.910017] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:212:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [413.910149] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:212:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [413.910295] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:212:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [413.910425] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:212:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [413.910562] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:268:pipe B] data rate 2055280 num active planes 1
<7> [413.910705] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [413.910840] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [413.910976] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [413.911110] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [413.911254] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [413.911408] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:212
<7> [413.920635] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [413.921953] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:580] from all active usage due to RMFB ioctl
<7> [413.921986] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:212:plane 3B] because [FB:580] is removed
<7> [413.922002] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:268:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0
<7> [413.922225] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:212:plane 3B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [413.922361] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:212:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [413.922492] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:212:plane 3B] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [413.922619] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:212:plane 3B] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [413.922744] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:212:plane 3B] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [413.922877] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [413.923021] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [413.923169] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [413.923308] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [413.923446] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [413.923582] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [413.923750] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [413.931801] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:580]
<7> [413.931857] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:268:pipe B] scaler_user index 1.8: staged scaling request for 20x20->2880x1800 scaler_users = 0x100
<7> [413.932002] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:212:plane 3B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [413.932131] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:212:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [413.932273] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:212:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [413.932400] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:212:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [413.932526] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:212:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [413.932663] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:268:pipe B] data rate 2055280 num active planes 1
<7> [413.932805] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [413.932942] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [413.933078] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [413.933221] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [413.933359] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [413.933518] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:212
<7> [413.942751] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [413.944046] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:580] from all active usage due to RMFB ioctl
<7> [413.944072] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:212:plane 3B] because [FB:580] is removed
<7> [413.944085] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:268:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0
<7> [413.944252] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:212:plane 3B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [413.944386] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:212:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [413.944512] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:212:plane 3B] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [413.944636] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:212:plane 3B] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [413.944760] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:212:plane 3B] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [413.944892] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [413.945033] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [413.945176] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [413.945315] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [413.945450] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [413.945584] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [413.945752] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [413.954327] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:580]
<7> [413.954612] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:268:pipe B] scaler_user index 1.9: staged scaling request for 20x20->2880x1800 scaler_users = 0x200
<7> [413.955237] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [413.955719] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [413.956210] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [413.956666] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [413.957025] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [413.957349] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:268:pipe B] data rate 2055280 num active planes 1
<7> [413.957666] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [413.957966] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [413.958181] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [413.958357] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [413.958528] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [413.958720] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:242
<7> [413.965059] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [413.966365] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:580] from all active usage due to RMFB ioctl
<7> [413.966394] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:242:plane 4B] because [FB:580] is removed
<7> [413.966407] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:268:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0
<7> [413.966555] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:242:plane 4B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [413.966694] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [413.966824] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:242:plane 4B] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [413.966946] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:242:plane 4B] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [413.967068] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:242:plane 4B] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [413.967215] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [413.967350] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [413.967481] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [413.967609] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [413.967734] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [413.967860] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [413.968017] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [413.976281] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:580]
<7> [413.976343] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:268:pipe B] scaler_user index 1.9: staged scaling request for 20x20->2880x1800 scaler_users = 0x200
<7> [413.976489] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [413.976615] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [413.976737] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [413.976856] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [413.976975] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [413.977105] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:268:pipe B] data rate 2055280 num active planes 1
<7> [413.977296] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:268:pipe B] scaler_user index 1.9: staged scaling request for 20x20->2880x1800 scaler_users = 0x200
<7> [413.977426] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [413.977545] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [413.977666] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [413.977784] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [413.977902] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [413.978023] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:268:pipe B] data rate 2055280 num active planes 1
<7> [413.978161] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [413.978291] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [413.978417] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [413.978539] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [413.978663] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [413.978803] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:242
<7> [413.987196] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [413.988464] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:580] from all active usage due to RMFB ioctl
<7> [413.988489] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:242:plane 4B] because [FB:580] is removed
<7> [413.988501] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:268:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0
<7> [413.988634] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:242:plane 4B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [413.988751] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [413.988872] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:242:plane 4B] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [413.988995] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:242:plane 4B] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [413.989112] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:242:plane 4B] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [413.989273] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [413.989409] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [413.989540] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [413.989667] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [413.989794] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [413.989917] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [413.990075] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [413.998394] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:580]
<7> [413.998458] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:268:pipe B] scaler_user index 1.10: staged scaling request for 20x20->2880x1800 scaler_users = 0x400
<7> [413.998595] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:252:plane 5B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [413.998714] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:252:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [413.998831] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:252:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [413.998949] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:252:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [413.999069] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:252:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [413.999217] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:268:pipe B] data rate 2055280 num active planes 1
<7> [413.999386] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:268:pipe B] scaler_user index 1.10: staged scaling request for 20x20->2880x1800 scaler_users = 0x400
<7> [413.999519] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:252:plane 5B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [413.999638] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:252:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [413.999758] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:252:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [413.999875] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:252:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [413.999991] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:252:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [414.000112] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:268:pipe B] data rate 2055280 num active planes 1
<7> [414.000283] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:268:pipe B] scaler_user index 1.10: staged scaling request for 20x20->2880x1800 scaler_users = 0x400
<7> [414.000408] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:252:plane 5B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [414.000526] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:252:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [414.000643] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:252:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [414.000758] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:252:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [414.000872] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:252:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [414.000992] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:268:pipe B] data rate 2055280 num active planes 1
<7> [414.001123] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [414.001263] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [414.001391] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [414.001517] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [414.001643] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [414.001789] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:252
<7> [414.009389] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [414.010711] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:580] from all active usage due to RMFB ioctl
<7> [414.010742] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:252:plane 5B] because [FB:580] is removed
<7> [414.010757] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:268:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0
<7> [414.010894] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:252:plane 5B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [414.011012] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:252:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [414.011225] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:252:plane 5B] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [414.011348] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:252:plane 5B] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [414.011467] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:252:plane 5B] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [414.011600] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [414.011729] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [414.011859] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [414.011988] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [414.012119] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [414.012274] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [414.012429] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [414.020664] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:580]
<7> [414.020717] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:268:pipe B] scaler_user index 1.10: staged scaling request for 20x20->2880x1800 scaler_users = 0x400
<7> [414.020853] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:252:plane 5B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [414.020973] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:252:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [414.021090] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:252:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [414.021246] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:252:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [414.021396] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:252:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [414.021550] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:268:pipe B] data rate 2055280 num active planes 1
<7> [414.021687] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [414.021812] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [414.021942] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [414.022066] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [414.022197] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [414.022340] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:252
<7> [414.031645] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [414.033004] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:580] from all active usage due to RMFB ioctl
<7> [414.033030] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:252:plane 5B] because [FB:580] is removed
<7> [414.033048] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:268:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0
<7> [414.033187] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:252:plane 5B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [414.033313] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:252:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [414.033428] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:252:plane 5B] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [414.033543] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:252:plane 5B] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [414.033660] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:252:plane 5B] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [414.033788] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [414.033918] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [414.034047] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [414.034218] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [414.034360] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [414.034486] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [414.034657] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<6> [414.043116] [IGT] kms_plane_scaling: finished subtest pipe-B, SUCCESS
<6> [414.043560] [IGT] kms_plane_scaling: starting dynamic subtest pipe-C
<7> [414.044624] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:580]
<7> [414.045259] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:507:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [414.045407] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:506:DDI A/PHY A][CRTC:386:pipe C] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [414.045531] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 link rate required 1926825 available 2160000
<7> [414.045651] i915 0000:00:02.0: [drm:intel_psr_compute_config [i915]] PSR2 not supported in transcoder C
<7> [414.045782] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:386:pipe C] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [414.045916] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:506:DDI A/PHY A] [CRTC:386:pipe C]
<7> [414.046035] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.enable (expected yes, found no)
<7> [414.046168] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected yes, found no)
<7> [414.046300] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in cpu_transcoder (expected 1, found -1)
<7> [414.046431] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in lane_count (expected 4, found 0)
<7> [414.046560] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 498869/524288, found tu 0, data 0/0 link 0/0)
<7> [414.046688] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [414.046814] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [414.046949] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)
<7> [414.047085] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)
<7> [414.047242] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)
<7> [414.047364] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)
<7> [414.047483] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)
<7> [414.047603] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)
<7> [414.047724] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)
<7> [414.047857] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1801, found 0)
<7> [414.047985] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)
<7> [414.048110] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)
<7> [414.048247] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1878, found 0)
<7> [414.048370] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1878, found 0)
<7> [414.048491] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)
<7> [414.048615] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)
<7> [414.048740] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)
<7> [414.048872] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)
<7> [414.049003] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)
<7> [414.049128] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)
<7> [414.049265] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)
<7> [414.049387] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1801, found 0)
<7> [414.049511] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)
<7> [414.049635] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)
<7> [414.049760] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1878, found 0)
<7> [414.049887] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1878, found 0)
<7> [414.050008] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [414.050134] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [414.050274] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [414.050404] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in enhanced_framing (expected yes, found no)
<7> [414.050533] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [414.050669] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 513820, found 0)
<7> [414.050804] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 513820, found 0)
<7> [414.050935] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in port_clock (expected 540000, found 0)
<7> [414.051065] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:268:pipe B] fastset requirement not met in set_context_latency (expected 1, found 0)
<7> [414.051223] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset
<7> [414.051347] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.enable (expected no, found yes)
<7> [414.051467] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.active (expected no, found yes)
<7> [414.051586] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in cpu_transcoder (expected -1, found 2)
<7> [414.051706] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in lane_count (expected 0, found 4)
<7> [414.051825] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 7483046/8388608 link 498869/524288)
<7> [414.051944] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [414.052067] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [414.052197] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)
<7> [414.052317] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)
<7> [414.052438] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)
<7> [414.052557] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)
<7> [414.052679] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)
<7> [414.052801] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)
<7> [414.052919] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)
<7> [414.053039] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1801)
<7> [414.053160] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)
<7> [414.053280] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)
<7> [414.053399] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1878)
<7> [414.053517] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1878)
<7> [414.053640] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)
<7> [414.053761] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)
<7> [414.053881] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)
<7> [414.053999] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)
<7> [414.054117] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)
<7> [414.054254] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)
<7> [414.054381] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)
<7> [414.054500] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1801)
<7> [414.054619] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)
<7> [414.054747] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)
<7> [414.054867] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1878)
<7> [414.054989] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1878)
<7> [414.055112] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [414.055245] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [414.055366] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [414.055485] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in enhanced_framing (expected no, found yes)
<7> [414.055605] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [414.055730] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 513820)
<7> [414.055851] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 513820)
<7> [414.055971] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in port_clock (expected 0, found 540000)
<7> [414.056090] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in set_context_latency (expected 0, found 1)
<7> [414.056217] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:386:pipe C] fastset requirement not met, forcing full modeset
<7> [414.056341] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:268:pipe B] releasing DPLL 0
<7> [414.056472] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:386:pipe C] scaler_user index 2.12: staged scaling request for 20x20->2880x1800 scaler_users = 0x1000
<7> [414.056619] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xd (total dbuf slices 0xf), mbus joined? yes->no
<7> [414.056750] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:268:pipe B] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x2 -> 0x4
<7> [414.056888] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:386:pipe C] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x2 -> 0x4
<7> [414.057024] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:262:cursor B] ddb (4001 - 4096) -> ( 0 - 0), size 95 -> 0
<7> [414.057168] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:270:plane 1C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [414.057282] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:380:cursor C] ddb ( 0 - 0) -> (1953 - 2048), size 0 -> 95
<7> [414.057394] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:270:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [414.057508] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:270:plane 1C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [414.057645] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:270:plane 1C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [414.057812] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:270:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [414.057971] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:386:pipe C] data rate 2055280 num active planes 1
<7> [414.058098] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [414.058228] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [414.058351] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [414.058472] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [414.058590] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [414.058710] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:268:pipe B] min cdclk: 256910 kHz -> 0 kHz
<7> [414.058830] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:386:pipe C] min cdclk: 0 kHz -> 256910 kHz
<7> [414.058975] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:386:pipe C] allocated DPLL 0
<7> [414.059097] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:386:pipe C] reserving DPLL 0
<7> [414.059270] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:386:pipe C] attached scaler id 2.0 to PLANE:270
<7> [414.059389] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:268:pipe B] enable: no [modeset]
<7> [414.059512] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:152:plane 1B] fb: [NOFB], visible: no
<7> [414.059637] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:182:plane 2B] fb: [NOFB], visible: no
<7> [414.059759] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:212:plane 3B] fb: [NOFB], visible: no
<7> [414.059880] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:242:plane 4B] fb: [NOFB], visible: no
<7> [414.060000] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:252:plane 5B] fb: [NOFB], visible: no
<7> [414.060119] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:262:cursor B] fb: [NOFB], visible: no
<7> [414.060260] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:386:pipe C] enable: yes [modeset]
<7> [414.060385] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [414.060507] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: C, pipe bpp: 30, dithering: 0
<7> [414.060628] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>
<7> [414.060756] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [414.060907] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0
<7> [414.061037] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0
<7> [414.061170] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64
<7> [414.061293] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [414.061413] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled
<7> [414.061534] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled
<7> [414.061656] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7> [414.061775] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0
<7> [414.061893] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [414.062012] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8
<7> [414.062131] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB
<7> [414.062268] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB
<7> [414.062387] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0
<7> [414.062503] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range
<7> [414.062619] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined
<7> [414.062739] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1
<7> [414.062857] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 1
<7> [414.062982] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1878, vmax: 1878, flipline: 1878, pipeline full: 0, guardband: 76 vsync start: 75, vsync end: 69
<7> [414.063104] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1878, vmax vtotal: 1878
<7> [414.063235] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [414.063358] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [414.063478] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [414.063599] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa
<7> [414.063718] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa
<7> [414.063837] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa
<7> [414.063955] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820, min cdclk 256910
<7> [414.064075] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0
<7> [414.064210] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x1000, scaler_id: -1, scaling_filter: 0
<7> [414.064372] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [414.064524] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0
<7> [414.064653] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [414.064775] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: fracen: yes,
<7> [414.064891] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] quot: 40960, rem: 0, den: 1,
<7> [414.065009] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 140, tx_clk_div: 0.
<7> [414.065130] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state:
<7> [414.065268] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21
<7> [414.065389] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7> [414.065508] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [414.065624] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [414.065742] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7> [414.065860] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7> [414.065978] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [414.066097] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [414.066226] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [414.066345] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [414.066466] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [414.066585] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [414.066702] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [414.066818] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [414.066935] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [414.067052] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [414.067184] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [414.067303] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [414.067418] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [414.067537] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:270:plane 1C] fb: [FB:580] 20x20 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [414.067665] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: 0, scaling_filter: 0
<7> [414.067800] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 20.000000x20.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [414.067921] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:300:plane 2C] fb: [NOFB], visible: no
<7> [414.068042] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:330:plane 3C] fb: [NOFB], visible: no
<7> [414.068177] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:360:plane 4C] fb: [NOFB], visible: no
<7> [414.068304] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:370:plane 5C] fb: [NOFB], visible: no
<7> [414.068419] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:380:cursor C] fb: [NOFB], visible: no
<7> [414.069979] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C
<7> [414.070182] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x82000000)
<7> [414.070551] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]
<7> [414.277251] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:507:eDP-1] set backlight PWM = 0
<7> [414.277968] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe B
<7> [414.289747] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turn panel power off
<7> [414.290056] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000
<7> [414.290290] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [414.290616] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:506:DDI A/PHY A] - short
<7> [414.290798] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [414.341330] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [414.341833] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x2, on? 1) for [CRTC:268:pipe B]
<7> [414.342005] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:506:DDI A/PHY A]
<7> [414.342809] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [414.343357] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:506:DDI A/PHY A] - long
<7> [414.343527] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0
<7> [414.343865] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [414.344139] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A
<7> [414.344472] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:506:DDI A/PHY A]
<7> [414.344734] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:506:DDI A/PHY A]
<7> [414.345168] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:515:DDI B/PHY B]
<7> [414.345387] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:517:DP-MST A]
<7> [414.345602] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:518:DP-MST B]
<7> [414.345819] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:519:DP-MST C]
<7> [414.346038] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:520:DP-MST D]
<7> [414.346275] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:533:DDI TC1/PHY TC1]
<7> [414.346486] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:535:DP-MST A]
<7> [414.346645] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:536:DP-MST B]
<7> [414.346766] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:537:DP-MST C]
<7> [414.346900] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:538:DP-MST D]
<7> [414.347046] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:542:DDI TC2/PHY TC2]
<7> [414.347253] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:546:DDI TC3/PHY TC3]
<7> [414.347416] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:548:DP-MST A]
<7> [414.347550] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:549:DP-MST B]
<7> [414.347689] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:550:DP-MST C]
<7> [414.347879] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:551:DP-MST D]
<7> [414.348096] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:555:DDI TC4/PHY TC4]
<7> [414.348277] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:557:DP-MST A]
<7> [414.348423] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:558:DP-MST B]
<7> [414.348593] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:559:DP-MST C]
<7> [414.348716] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:560:DP-MST D]
<7> [414.348830] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:516:DP-1]
<7> [414.348971] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [414.349122] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:534:DP-2]
<7> [414.349267] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:543:HDMI-A-2]
<7> [414.349404] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:547:DP-3]
<7> [414.349559] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:556:DP-4]
<7> [414.349751] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 2 (mbus joined: no)
<7> [414.349901] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: yes -> no (pipe: *)
<7> [414.350080] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A
<7> [414.351174] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x4, on? 0) for [CRTC:386:pipe C]
<7> [414.351333] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0
<7> [414.353864] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turn panel power on
<7> [414.354016] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 wait for panel power cycle (488 ms remaining)
<7> [414.845548] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [414.935401] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [414.936224] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 wait for panel power on
<7> [414.936900] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [414.967993] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [414.968577] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:506:DDI A/PHY A] - long
<7> [414.969090] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [414.969621] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:506:DDI A/PHY A]
<7> [415.140453] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [415.141610] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turning VDD on
<7> [415.142320] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [415.145682] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80
<7> [415.146878] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [415.147492] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07
<7> [415.148572] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [415.149467] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [415.150365] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Clock recovery OK
<7> [415.150478] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Using DP training pattern TPS3
<7> [415.151774] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [415.151884] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4
<7> [415.152478] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe C
<7> [415.152712] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]
<7> [415.152828] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe C
<7> [415.152998] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:507:eDP-1] set backlight PWM = 13892
<7> [415.163880] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xd
<7> [415.164181] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B
<7> [415.164320] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x8a000000)
<7> [415.164506] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:268:pipe B]
<7> [415.164649] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [415.165872] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:507:eDP-1]
<7> [415.166142] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:386:pipe C]
<7> [415.168842] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe C
<7> [415.168995] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:580] from all active usage due to RMFB ioctl
<7> [415.169041] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:270:plane 1C] because [FB:580] is removed
<7> [415.169067] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:386:pipe C] scaler_user index 2.12: Staged freeing scaler id 0 scaler_users = 0x0
<7> [415.169207] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:270:plane 1C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [415.169325] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:270:plane 1C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [415.169491] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:270:plane 1C] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.169681] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:270:plane 1C] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.169860] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:270:plane 1C] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.170002] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:386:pipe C] data rate 0 num active planes 0
<7> [415.170167] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [415.170300] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [415.170426] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [415.170553] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [415.170726] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [415.170913] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [415.175221] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:581]
<7> [415.175288] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:386:pipe C] scaler_user index 2.12: staged scaling request for 20x20->2880x1800 scaler_users = 0x1000
<7> [415.175425] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:270:plane 1C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [415.175549] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:270:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [415.175664] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:270:plane 1C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [415.175780] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:270:plane 1C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [415.175898] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:270:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [415.176034] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:386:pipe C] data rate 2055280 num active planes 1
<7> [415.176204] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [415.176395] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [415.176534] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [415.176661] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [415.176787] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [415.176929] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:386:pipe C] attached scaler id 2.0 to PLANE:270
<7> [415.186104] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [415.187130] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:581] from all active usage due to RMFB ioctl
<7> [415.187157] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:270:plane 1C] because [FB:581] is removed
<7> [415.187175] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:386:pipe C] scaler_user index 2.12: Staged freeing scaler id 0 scaler_users = 0x0
<7> [415.187314] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:270:plane 1C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [415.187434] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:270:plane 1C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [415.187552] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:270:plane 1C] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.187670] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:270:plane 1C] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.187785] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:270:plane 1C] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.187910] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:386:pipe C] data rate 0 num active planes 0
<7> [415.188048] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [415.188173] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [415.188301] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [415.188427] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [415.188550] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [415.188710] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [415.197330] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:581]
<7> [415.197400] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:386:pipe C] scaler_user index 2.13: staged scaling request for 20x20->2880x1800 scaler_users = 0x2000
<7> [415.197545] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:300:plane 2C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [415.197663] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:300:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [415.197780] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:300:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [415.197901] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:300:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [415.198073] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:300:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [415.198207] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:386:pipe C] data rate 2055280 num active planes 1
<7> [415.198333] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [415.198463] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [415.198591] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [415.198718] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [415.198848] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [415.198997] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:386:pipe C] attached scaler id 2.0 to PLANE:300
<7> [415.208335] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [415.209674] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:581] from all active usage due to RMFB ioctl
<7> [415.209733] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:300:plane 2C] because [FB:581] is removed
<7> [415.209764] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:386:pipe C] scaler_user index 2.13: Staged freeing scaler id 0 scaler_users = 0x0
<7> [415.210098] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:300:plane 2C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [415.210338] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:300:plane 2C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [415.210565] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:300:plane 2C] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.210789] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:300:plane 2C] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.211021] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:300:plane 2C] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.211262] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:386:pipe C] data rate 0 num active planes 0
<7> [415.211475] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [415.211695] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [415.211948] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [415.212156] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [415.212358] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [415.212631] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [415.219645] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:581]
<7> [415.219741] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:386:pipe C] scaler_user index 2.13: staged scaling request for 20x20->2880x1800 scaler_users = 0x2000
<7> [415.219958] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:300:plane 2C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [415.220169] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:300:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [415.220366] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:300:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [415.220555] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:300:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [415.220740] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:300:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [415.220953] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:386:pipe C] data rate 2055280 num active planes 1
<7> [415.221116] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [415.221256] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [415.221390] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [415.221519] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [415.221647] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [415.221798] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:386:pipe C] attached scaler id 2.0 to PLANE:300
<7> [415.230543] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [415.231650] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:581] from all active usage due to RMFB ioctl
<7> [415.231690] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:300:plane 2C] because [FB:581] is removed
<7> [415.231711] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:386:pipe C] scaler_user index 2.13: Staged freeing scaler id 0 scaler_users = 0x0
<7> [415.231927] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:300:plane 2C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [415.232131] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:300:plane 2C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [415.232319] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:300:plane 2C] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.232503] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:300:plane 2C] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.232687] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:300:plane 2C] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.232883] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:386:pipe C] data rate 0 num active planes 0
<7> [415.233097] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [415.233301] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [415.233501] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [415.233699] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [415.233897] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [415.234153] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [415.241894] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:581]
<7> [415.242024] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:386:pipe C] scaler_user index 2.14: staged scaling request for 20x20->2880x1800 scaler_users = 0x4000
<7> [415.242266] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:330:plane 3C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [415.242402] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:330:plane 3C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [415.242549] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:330:plane 3C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [415.242675] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:330:plane 3C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [415.242799] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:330:plane 3C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [415.242931] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:386:pipe C] data rate 2055280 num active planes 1
<7> [415.243081] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [415.243211] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [415.243340] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [415.243465] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [415.243590] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [415.243735] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:386:pipe C] attached scaler id 2.0 to PLANE:330
<7> [415.252794] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [415.253869] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:581] from all active usage due to RMFB ioctl
<7> [415.253898] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:330:plane 3C] because [FB:581] is removed
<7> [415.253912] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:386:pipe C] scaler_user index 2.14: Staged freeing scaler id 0 scaler_users = 0x0
<7> [415.254061] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:330:plane 3C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [415.254182] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:330:plane 3C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [415.254302] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:330:plane 3C] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.254418] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:330:plane 3C] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.254532] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:330:plane 3C] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.254652] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:386:pipe C] data rate 0 num active planes 0
<7> [415.254777] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [415.254902] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [415.255040] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [415.255165] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [415.255294] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [415.255448] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [415.264035] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:581]
<7> [415.264088] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:386:pipe C] scaler_user index 2.14: staged scaling request for 20x20->2880x1800 scaler_users = 0x4000
<7> [415.264228] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:330:plane 3C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [415.264351] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:330:plane 3C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [415.264472] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:330:plane 3C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [415.264591] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:330:plane 3C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [415.264707] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:330:plane 3C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [415.264834] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:386:pipe C] data rate 2055280 num active planes 1
<7> [415.264958] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [415.265106] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [415.265234] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [415.265361] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [415.265486] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [415.265650] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:386:pipe C] attached scaler id 2.0 to PLANE:330
<7> [415.275008] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [415.276642] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:581] from all active usage due to RMFB ioctl
<7> [415.276728] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:330:plane 3C] because [FB:581] is removed
<7> [415.276768] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:386:pipe C] scaler_user index 2.14: Staged freeing scaler id 0 scaler_users = 0x0
<7> [415.277324] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:330:plane 3C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [415.277729] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:330:plane 3C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [415.277991] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:330:plane 3C] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.278279] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:330:plane 3C] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.278538] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:330:plane 3C] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.278799] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:386:pipe C] data rate 0 num active planes 0
<7> [415.278967] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [415.279143] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [415.279300] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [415.279450] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [415.279601] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [415.279792] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [415.286206] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:581]
<7> [415.286281] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:386:pipe C] scaler_user index 2.15: staged scaling request for 20x20->2880x1800 scaler_users = 0x8000
<7> [415.286428] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:360:plane 4C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [415.286562] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:360:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [415.286688] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:360:plane 4C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [415.286815] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:360:plane 4C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [415.286942] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:360:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [415.287092] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:386:pipe C] data rate 2055280 num active planes 1
<7> [415.287259] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:386:pipe C] scaler_user index 2.15: staged scaling request for 20x20->2880x1800 scaler_users = 0x8000
<7> [415.287394] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:360:plane 4C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [415.287529] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:360:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [415.287657] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:360:plane 4C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [415.287784] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:360:plane 4C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [415.287913] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:360:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [415.288052] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:386:pipe C] data rate 2055280 num active planes 1
<7> [415.288185] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [415.288318] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [415.288452] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [415.288584] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [415.288712] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [415.288864] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:386:pipe C] attached scaler id 2.0 to PLANE:360
<7> [415.297229] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [415.298335] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:581] from all active usage due to RMFB ioctl
<7> [415.298363] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:360:plane 4C] because [FB:581] is removed
<7> [415.298377] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:386:pipe C] scaler_user index 2.15: Staged freeing scaler id 0 scaler_users = 0x0
<7> [415.298521] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:360:plane 4C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [415.298647] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:360:plane 4C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [415.298771] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:360:plane 4C] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.298892] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:360:plane 4C] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.299026] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:360:plane 4C] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.299158] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:386:pipe C] data rate 0 num active planes 0
<7> [415.299294] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [415.299428] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [415.299559] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [415.299690] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [415.299820] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [415.300000] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [415.308461] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:581]
<7> [415.308514] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:386:pipe C] scaler_user index 2.15: staged scaling request for 20x20->2880x1800 scaler_users = 0x8000
<7> [415.308654] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:360:plane 4C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [415.308780] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:360:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [415.308902] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:360:plane 4C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [415.309037] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:360:plane 4C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [415.309159] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:360:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [415.310445] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:386:pipe C] data rate 2055280 num active planes 1
<7> [415.310621] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:386:pipe C] scaler_user index 2.15: staged scaling request for 20x20->2880x1800 scaler_users = 0x8000
<7> [415.310758] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:360:plane 4C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [415.310885] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:360:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [415.311019] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:360:plane 4C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [415.311141] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:360:plane 4C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [415.311262] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:360:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [415.311393] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:386:pipe C] data rate 2055280 num active planes 1
<7> [415.311545] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:386:pipe C] scaler_user index 2.15: staged scaling request for 20x20->2880x1800 scaler_users = 0x8000
<7> [415.311665] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:360:plane 4C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [415.311784] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:360:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [415.311915] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:360:plane 4C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [415.312046] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:360:plane 4C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [415.312163] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:360:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [415.312281] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:386:pipe C] data rate 2055280 num active planes 1
<7> [415.312406] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [415.312542] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [415.312681] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [415.312806] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [415.312926] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [415.315017] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:386:pipe C] attached scaler id 2.0 to PLANE:360
<7> [415.319437] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [415.320709] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:581] from all active usage due to RMFB ioctl
<7> [415.320750] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:360:plane 4C] because [FB:581] is removed
<7> [415.320770] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:386:pipe C] scaler_user index 2.15: Staged freeing scaler id 0 scaler_users = 0x0
<7> [415.321011] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:360:plane 4C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [415.321207] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:360:plane 4C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [415.321398] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:360:plane 4C] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.321587] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:360:plane 4C] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.321773] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:360:plane 4C] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.321972] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:386:pipe C] data rate 0 num active planes 0
<7> [415.322196] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [415.322404] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [415.322604] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [415.322803] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [415.323008] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [415.323258] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [415.330760] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:581]
<7> [415.330864] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:386:pipe C] scaler_user index 2.16: staged scaling request for 20x20->2880x1800 scaler_users = 0x10000
<7> [415.331101] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:370:plane 5C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [415.331329] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [415.331542] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [415.331727] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [415.331909] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [415.332123] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:386:pipe C] data rate 2055280 num active planes 1
<7> [415.332383] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:386:pipe C] scaler_user index 2.16: staged scaling request for 20x20->2880x1800 scaler_users = 0x10000
<7> [415.332580] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:370:plane 5C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [415.332768] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [415.332951] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [415.333183] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [415.333367] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [415.333558] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:386:pipe C] data rate 2055280 num active planes 1
<7> [415.333863] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:386:pipe C] scaler_user index 2.16: staged scaling request for 20x20->2880x1800 scaler_users = 0x10000
<7> [415.334106] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:370:plane 5C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [415.334292] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [415.334473] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [415.334655] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [415.334837] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [415.335034] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:386:pipe C] data rate 2055280 num active planes 1
<7> [415.335238] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [415.335438] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [415.335636] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [415.335833] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [415.336041] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [415.336268] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:386:pipe C] attached scaler id 2.0 to PLANE:370
<7> [415.341663] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [415.342856] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:581] from all active usage due to RMFB ioctl
<7> [415.342896] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:370:plane 5C] because [FB:581] is removed
<7> [415.342915] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:386:pipe C] scaler_user index 2.16: Staged freeing scaler id 0 scaler_users = 0x0
<7> [415.343143] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:370:plane 5C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [415.343333] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 5C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [415.343519] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 5C] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.343702] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 5C] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.343885] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 5C] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.344091] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:386:pipe C] data rate 0 num active planes 0
<7> [415.344295] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [415.344496] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [415.344696] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [415.344892] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [415.345100] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [415.345345] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [415.352969] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:581]
<7> [415.353069] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:386:pipe C] scaler_user index 2.16: staged scaling request for 20x20->2880x1800 scaler_users = 0x10000
<7> [415.353293] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:370:plane 5C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [415.353423] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [415.353562] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [415.353684] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [415.353804] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [415.353930] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:386:pipe C] data rate 2055280 num active planes 1
<7> [415.354078] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [415.354205] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [415.354332] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [415.354455] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [415.354581] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [415.354729] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:386:pipe C] attached scaler id 2.0 to PLANE:370
<7> [415.363903] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [415.364975] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:581] from all active usage due to RMFB ioctl
<7> [415.365016] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:370:plane 5C] because [FB:581] is removed
<7> [415.365029] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:386:pipe C] scaler_user index 2.16: Staged freeing scaler id 0 scaler_users = 0x0
<7> [415.365166] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:370:plane 5C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [415.365293] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 5C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [415.365415] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 5C] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.365549] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 5C] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.365673] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 5C] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.365803] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:386:pipe C] data rate 0 num active planes 0
<7> [415.365935] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [415.366080] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [415.366203] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [415.366329] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [415.366453] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [415.366609] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<6> [415.375432] [IGT] kms_plane_scaling: finished subtest pipe-C, SUCCESS
<6> [415.376002] [IGT] kms_plane_scaling: starting dynamic subtest pipe-D
<7> [415.377157] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:581]
<7> [415.377826] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:507:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [415.378000] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:506:DDI A/PHY A][CRTC:504:pipe D] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [415.378134] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 link rate required 1926825 available 2160000
<7> [415.378265] i915 0000:00:02.0: [drm:intel_psr_compute_config [i915]] PSR2 not supported in transcoder D
<7> [415.378407] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:504:pipe D] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [415.378550] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:506:DDI A/PHY A] [CRTC:504:pipe D]
<7> [415.378678] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.enable (expected yes, found no)
<7> [415.378817] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.active (expected yes, found no)
<7> [415.378955] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in cpu_transcoder (expected 2, found -1)
<7> [415.379110] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in lane_count (expected 4, found 0)
<7> [415.379248] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 498869/524288, found tu 0, data 0/0 link 0/0)
<7> [415.379384] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [415.379519] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [415.379652] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)
<7> [415.379784] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)
<7> [415.379919] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)
<7> [415.380065] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)
<7> [415.380198] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)
<7> [415.380331] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)
<7> [415.380463] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)
<7> [415.380595] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1801, found 0)
<7> [415.380726] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)
<7> [415.380855] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)
<7> [415.380993] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1878, found 0)
<7> [415.381126] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1878, found 0)
<7> [415.381256] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)
<7> [415.381384] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)
<7> [415.381515] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)
<7> [415.381645] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)
<7> [415.381774] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)
<7> [415.381904] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)
<7> [415.382047] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)
<7> [415.382178] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1801, found 0)
<7> [415.382305] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)
<7> [415.382432] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)
<7> [415.382557] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1878, found 0)
<7> [415.382685] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1878, found 0)
<7> [415.382815] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [415.382946] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [415.383093] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [415.383222] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in enhanced_framing (expected yes, found no)
<7> [415.383351] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [415.383476] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 513820, found 0)
<7> [415.383604] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 513820, found 0)
<7> [415.383736] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in port_clock (expected 540000, found 0)
<7> [415.383867] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:386:pipe C] fastset requirement not met in set_context_latency (expected 1, found 0)
<7> [415.384001] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:386:pipe C] fastset requirement not met, forcing full modeset
<7> [415.384129] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.enable (expected no, found yes)
<7> [415.384257] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.active (expected no, found yes)
<7> [415.384388] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in cpu_transcoder (expected -1, found 3)
<7> [415.384519] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in lane_count (expected 0, found 4)
<7> [415.384653] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 7483046/8388608 link 498869/524288)
<7> [415.384787] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [415.384917] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [415.385058] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)
<7> [415.385188] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)
<7> [415.385319] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)
<7> [415.385453] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)
<7> [415.385584] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)
<7> [415.385716] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)
<7> [415.385847] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)
<7> [415.385975] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1801)
<7> [415.386123] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)
<7> [415.386257] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)
<7> [415.386390] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1878)
<7> [415.386522] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1878)
<7> [415.386654] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)
<7> [415.386785] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)
<7> [415.386916] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)
<7> [415.387058] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)
<7> [415.387196] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)
<7> [415.387330] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)
<7> [415.387462] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)
<7> [415.387593] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1801)
<7> [415.387724] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)
<7> [415.387855] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)
<7> [415.387991] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1878)
<7> [415.388126] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1878)
<7> [415.388259] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [415.388388] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [415.388519] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [415.388648] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in enhanced_framing (expected no, found yes)
<7> [415.388776] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [415.388908] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 513820)
<7> [415.389131] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 513820)
<7> [415.389261] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in port_clock (expected 0, found 540000)
<7> [415.389391] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in set_context_latency (expected 0, found 1)
<7> [415.389518] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:504:pipe D] fastset requirement not met, forcing full modeset
<7> [415.389647] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:386:pipe C] releasing DPLL 0
<7> [415.389790] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:504:pipe D] scaler_user index 3.18: staged scaling request for 20x20->2880x1800 scaler_users = 0x40000
<7> [415.389935] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xd -> 0x3 (total dbuf slices 0xf), mbus joined? no->no
<7> [415.390076] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:386:pipe C] dbuf slices 0xc -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x4 -> 0x8
<7> [415.390202] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:504:pipe D] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x4 -> 0x8
<7> [415.390328] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:380:cursor C] ddb (1953 - 2048) -> ( 0 - 0), size 95 -> 0
<7> [415.390451] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:388:plane 1D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [415.390571] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:498:cursor D] ddb ( 0 - 0) -> (1953 - 2048), size 0 -> 95
<7> [415.390692] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:388:plane 1D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [415.390815] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:388:plane 1D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [415.390937] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:388:plane 1D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [415.391078] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:388:plane 1D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [415.391224] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:504:pipe D] data rate 2055280 num active planes 1
<7> [415.391363] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [415.391497] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [415.391632] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [415.391772] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [415.391943] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [415.392115] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:386:pipe C] min cdclk: 256910 kHz -> 0 kHz
<7> [415.392247] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:504:pipe D] min cdclk: 0 kHz -> 256910 kHz
<7> [415.392399] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:504:pipe D] allocated DPLL 0
<7> [415.392534] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:504:pipe D] reserving DPLL 0
<7> [415.392665] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:504:pipe D] attached scaler id 3.0 to PLANE:388
<7> [415.392790] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:386:pipe C] enable: no [modeset]
<7> [415.392927] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:270:plane 1C] fb: [NOFB], visible: no
<7> [415.393069] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:300:plane 2C] fb: [NOFB], visible: no
<7> [415.393203] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:330:plane 3C] fb: [NOFB], visible: no
<7> [415.393336] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:360:plane 4C] fb: [NOFB], visible: no
<7> [415.393468] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:370:plane 5C] fb: [NOFB], visible: no
<7> [415.393602] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:380:cursor C] fb: [NOFB], visible: no
<7> [415.393734] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:504:pipe D] enable: yes [modeset]
<7> [415.393866] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [415.394014] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: D, pipe bpp: 30, dithering: 0
<7> [415.394148] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>
<7> [415.394278] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [415.394409] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0
<7> [415.394550] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0
<7> [415.394725] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64
<7> [415.394867] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [415.395003] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled
<7> [415.395139] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled
<7> [415.395269] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7> [415.395402] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0
<7> [415.395535] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [415.395666] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8
<7> [415.395795] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB
<7> [415.395924] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB
<7> [415.396065] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0
<7> [415.396197] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range
<7> [415.396327] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined
<7> [415.396456] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1
<7> [415.396584] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 1
<7> [415.396713] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1878, vmax: 1878, flipline: 1878, pipeline full: 0, guardband: 76 vsync start: 75, vsync end: 69
<7> [415.396839] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1878, vmax vtotal: 1878
<7> [415.396965] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [415.397108] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [415.397242] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [415.397373] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa
<7> [415.397503] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa
<7> [415.397635] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa
<7> [415.397766] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820, min cdclk 256910
<7> [415.397896] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0
<7> [415.398046] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x40000, scaler_id: -1, scaling_filter: 0
<7> [415.398175] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [415.398305] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0
<7> [415.398434] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [415.398561] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: fracen: yes,
<7> [415.398688] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] quot: 40960, rem: 0, den: 1,
<7> [415.398816] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 140, tx_clk_div: 0.
<7> [415.398947] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state:
<7> [415.399088] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21
<7> [415.399221] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7> [415.399349] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [415.399477] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [415.399607] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7> [415.399736] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7> [415.399863] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [415.400004] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [415.400138] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [415.400266] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [415.400397] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [415.400525] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [415.400653] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [415.400780] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [415.400907] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [415.401045] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [415.401178] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [415.401307] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [415.401434] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [415.401562] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:388:plane 1D] fb: [FB:581] 20x20 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [415.401692] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: 0, scaling_filter: 0
<7> [415.401820] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 20.000000x20.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [415.401948] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:418:plane 2D] fb: [NOFB], visible: no
<7> [415.402102] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:448:plane 3D] fb: [NOFB], visible: no
<7> [415.402239] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:478:plane 4D] fb: [NOFB], visible: no
<7> [415.402409] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:488:plane 5D] fb: [NOFB], visible: no
<7> [415.402543] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:498:cursor D] fb: [NOFB], visible: no
<7> [415.403785] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D
<7> [415.403997] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating enabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x0a000000)
<7> [415.404256] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]
<7> [415.613362] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:507:eDP-1] set backlight PWM = 0
<7> [415.614418] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe C
<7> [415.621569] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turn panel power off
<7> [415.621925] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000
<7> [415.622158] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [415.622482] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:506:DDI A/PHY A] - short
<7> [415.622706] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [415.673328] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [415.673825] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x4, on? 1) for [CRTC:386:pipe C]
<7> [415.673996] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:506:DDI A/PHY A]
<7> [415.674686] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [415.675232] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:506:DDI A/PHY A] - long
<7> [415.675413] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0
<7> [415.675838] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A
<7> [415.675738] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [415.676168] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:506:DDI A/PHY A]
<7> [415.676387] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:515:DDI B/PHY B]
<7> [415.676259] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:506:DDI A/PHY A]
<7> [415.676602] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:517:DP-MST A]
<7> [415.676816] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:518:DP-MST B]
<7> [415.677038] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:519:DP-MST C]
<7> [415.677235] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:520:DP-MST D]
<7> [415.677371] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:533:DDI TC1/PHY TC1]
<7> [415.677655] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:535:DP-MST A]
<7> [415.677872] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:536:DP-MST B]
<7> [415.678080] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:537:DP-MST C]
<7> [415.678292] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:538:DP-MST D]
<7> [415.678468] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:542:DDI TC2/PHY TC2]
<7> [415.678610] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:546:DDI TC3/PHY TC3]
<7> [415.678739] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:548:DP-MST A]
<7> [415.678867] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:549:DP-MST B]
<7> [415.679001] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:550:DP-MST C]
<7> [415.679127] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:551:DP-MST D]
<7> [415.679252] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:555:DDI TC4/PHY TC4]
<7> [415.679384] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:557:DP-MST A]
<7> [415.679528] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:558:DP-MST B]
<7> [415.679685] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:559:DP-MST C]
<7> [415.679851] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:560:DP-MST D]
<7> [415.679995] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:516:DP-1]
<7> [415.680150] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [415.680297] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:534:DP-2]
<7> [415.680447] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:543:HDMI-A-2]
<7> [415.680595] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:547:DP-3]
<7> [415.680763] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:556:DP-4]
<7> [415.680987] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf
<7> [415.681228] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 2 (mbus joined: no)
<7> [415.681444] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A
<7> [415.682833] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x8, on? 0) for [CRTC:504:pipe D]
<7> [415.683040] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0
<7> [415.684786] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turn panel power on
<7> [415.684940] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 wait for panel power cycle (489 ms remaining)
<7> [416.181376] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [416.261319] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [416.261926] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 wait for panel power on
<7> [416.262577] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [416.293657] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [416.294205] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:506:DDI A/PHY A] - long
<7> [416.294707] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [416.295299] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:506:DDI A/PHY A]
<7> [416.466201] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [416.467000] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turning VDD on
<7> [416.467672] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [416.471136] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80
<7> [416.472558] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [416.473477] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07
<7> [416.474995] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [416.475922] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [416.476937] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Clock recovery OK
<7> [416.477120] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Using DP training pattern TPS3
<7> [416.478577] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [416.478746] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4
<7> [416.479829] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe D
<7> [416.480078] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]
<7> [416.480197] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe D
<7> [416.480369] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:507:eDP-1] set backlight PWM = 13892
<7> [416.491255] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3
<7> [416.491553] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C
<7> [416.491694] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x2a000000)
<7> [416.491906] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:386:pipe C]
<7> [416.492060] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [416.493354] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:507:eDP-1]
<7> [416.493548] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:504:pipe D]
<7> [416.496079] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0x2000061 0x13421c72)
<7> [416.496657] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe D
<7> [416.496829] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:581] from all active usage due to RMFB ioctl
<7> [416.496923] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:388:plane 1D] because [FB:581] is removed
<7> [416.496964] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:504:pipe D] scaler_user index 3.18: Staged freeing scaler id 0 scaler_users = 0x0
<7> [416.497112] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:388:plane 1D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [416.497230] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:388:plane 1D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [416.497353] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:388:plane 1D] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.497481] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:388:plane 1D] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.497597] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:388:plane 1D] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.497724] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:504:pipe D] data rate 0 num active planes 0
<7> [416.497895] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [416.498028] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [416.498153] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [416.498279] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [416.498419] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [416.498594] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [416.502561] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:582]
<7> [416.502641] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:504:pipe D] scaler_user index 3.18: staged scaling request for 20x20->2880x1800 scaler_users = 0x40000
<7> [416.502795] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:388:plane 1D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [416.502951] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:388:plane 1D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [416.503086] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:388:plane 1D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [416.503221] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:388:plane 1D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [416.503368] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:388:plane 1D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [416.503518] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:504:pipe D] data rate 2055280 num active planes 1
<7> [416.503715] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [416.503923] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [416.504078] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [416.504215] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [416.504357] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [416.504518] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:504:pipe D] attached scaler id 3.0 to PLANE:388
<7> [416.513466] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [416.514479] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:582] from all active usage due to RMFB ioctl
<7> [416.514506] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:388:plane 1D] because [FB:582] is removed
<7> [416.514520] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:504:pipe D] scaler_user index 3.18: Staged freeing scaler id 0 scaler_users = 0x0
<7> [416.514662] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:388:plane 1D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [416.514790] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:388:plane 1D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [416.514943] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:388:plane 1D] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.515084] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:388:plane 1D] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.515230] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:388:plane 1D] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.515372] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:504:pipe D] data rate 0 num active planes 0
<7> [416.515510] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [416.515647] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [416.515779] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [416.515935] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [416.516068] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [416.516234] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [416.524736] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:582]
<7> [416.524802] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:504:pipe D] scaler_user index 3.19: staged scaling request for 20x20->2880x1800 scaler_users = 0x80000
<7> [416.524985] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:418:plane 2D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [416.525130] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:418:plane 2D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [416.525264] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:418:plane 2D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [416.525399] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:418:plane 2D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [416.525525] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:418:plane 2D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [416.525658] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:504:pipe D] data rate 2055280 num active planes 1
<7> [416.525795] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [416.525947] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [416.526080] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [416.526216] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [416.526344] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [416.526497] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:504:pipe D] attached scaler id 3.0 to PLANE:418
<7> [416.535699] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [416.536769] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:582] from all active usage due to RMFB ioctl
<7> [416.536796] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:418:plane 2D] because [FB:582] is removed
<7> [416.536809] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:504:pipe D] scaler_user index 3.19: Staged freeing scaler id 0 scaler_users = 0x0
<7> [416.536973] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:418:plane 2D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [416.537148] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:418:plane 2D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [416.537300] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:418:plane 2D] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.537427] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:418:plane 2D] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.537553] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:418:plane 2D] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.537687] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:504:pipe D] data rate 0 num active planes 0
<7> [416.537820] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [416.537970] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [416.538106] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [416.538242] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [416.538373] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [416.538537] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [416.546982] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:582]
<7> [416.547043] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:504:pipe D] scaler_user index 3.19: staged scaling request for 20x20->2880x1800 scaler_users = 0x80000
<7> [416.547192] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:418:plane 2D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [416.547316] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:418:plane 2D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [416.547439] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:418:plane 2D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [416.547564] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:418:plane 2D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [416.547686] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:418:plane 2D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [416.547817] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:504:pipe D] data rate 2055280 num active planes 1
<7> [416.547970] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [416.548105] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [416.548236] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [416.548391] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [416.548525] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [416.548673] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:504:pipe D] attached scaler id 3.0 to PLANE:418
<7> [416.557905] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [416.558975] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:582] from all active usage due to RMFB ioctl
<7> [416.559005] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:418:plane 2D] because [FB:582] is removed
<7> [416.559018] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:504:pipe D] scaler_user index 3.19: Staged freeing scaler id 0 scaler_users = 0x0
<7> [416.559159] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:418:plane 2D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [416.559284] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:418:plane 2D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [416.559406] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:418:plane 2D] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.559528] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:418:plane 2D] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.559650] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:418:plane 2D] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.559782] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:504:pipe D] data rate 0 num active planes 0
<7> [416.559937] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [416.560072] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [416.560205] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [416.560335] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [416.560463] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [416.560624] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [416.569115] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:582]
<7> [416.569178] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:504:pipe D] scaler_user index 3.20: staged scaling request for 20x20->2880x1800 scaler_users = 0x100000
<7> [416.569319] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:448:plane 3D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [416.569445] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 3D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [416.569569] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 3D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [416.569693] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 3D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [416.569814] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 3D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [416.569972] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:504:pipe D] data rate 2055280 num active planes 1
<7> [416.570113] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [416.570250] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [416.570384] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [416.570516] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [416.570649] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [416.570800] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:504:pipe D] attached scaler id 3.0 to PLANE:448
<7> [416.580117] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [416.581173] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:582] from all active usage due to RMFB ioctl
<7> [416.581200] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:448:plane 3D] because [FB:582] is removed
<7> [416.581213] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:504:pipe D] scaler_user index 3.20: Staged freeing scaler id 0 scaler_users = 0x0
<7> [416.581355] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:448:plane 3D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [416.581479] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 3D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [416.581600] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 3D] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.581721] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 3D] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.581856] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 3D] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.581989] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:504:pipe D] data rate 0 num active planes 0
<7> [416.582122] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [416.582256] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [416.582387] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [416.582520] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [416.582650] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [416.582810] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [416.591438] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:582]
<7> [416.591500] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:504:pipe D] scaler_user index 3.20: staged scaling request for 20x20->2880x1800 scaler_users = 0x100000
<7> [416.591639] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:448:plane 3D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [416.591766] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 3D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [416.591908] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 3D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [416.592043] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 3D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [416.592169] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 3D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [416.592303] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:504:pipe D] data rate 2055280 num active planes 1
<7> [416.592464] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:504:pipe D] scaler_user index 3.20: staged scaling request for 20x20->2880x1800 scaler_users = 0x100000
<7> [416.592598] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:448:plane 3D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [416.592724] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 3D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [416.592856] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 3D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [416.592980] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 3D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [416.593102] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 3D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [416.593228] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:504:pipe D] data rate 2055280 num active planes 1
<7> [416.593362] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [416.593498] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [416.593628] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [416.593765] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [416.593915] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [416.594066] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:504:pipe D] attached scaler id 3.0 to PLANE:448
<7> [416.602355] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [416.603392] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:582] from all active usage due to RMFB ioctl
<7> [416.603420] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:448:plane 3D] because [FB:582] is removed
<7> [416.603432] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:504:pipe D] scaler_user index 3.20: Staged freeing scaler id 0 scaler_users = 0x0
<7> [416.603575] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:448:plane 3D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [416.603701] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 3D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [416.603825] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 3D] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.603986] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 3D] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.604109] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 3D] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.604239] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:504:pipe D] data rate 0 num active planes 0
<7> [416.604377] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [416.604513] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [416.604647] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [416.604779] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [416.604926] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [416.605088] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [416.613636] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:582]
<7> [416.613701] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:504:pipe D] scaler_user index 3.21: staged scaling request for 20x20->2880x1800 scaler_users = 0x200000
<7> [416.613902] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:478:plane 4D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [416.614029] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 4D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [416.614151] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 4D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [416.614283] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 4D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [416.614410] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 4D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [416.614543] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:504:pipe D] data rate 2055280 num active planes 1
<7> [416.614713] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:504:pipe D] scaler_user index 3.21: staged scaling request for 20x20->2880x1800 scaler_users = 0x200000
<7> [416.614858] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:478:plane 4D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [416.614979] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 4D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [416.615098] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 4D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [416.615218] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 4D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [416.615336] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 4D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [416.615461] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:504:pipe D] data rate 2055280 num active planes 1
<7> [416.615624] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:504:pipe D] scaler_user index 3.21: staged scaling request for 20x20->2880x1800 scaler_users = 0x200000
<7> [416.615754] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:478:plane 4D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [416.615891] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 4D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [416.616015] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 4D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [416.616138] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 4D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [416.616260] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 4D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [416.616387] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:504:pipe D] data rate 2055280 num active planes 1
<7> [416.616522] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [416.616655] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [416.616788] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [416.616944] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [416.617083] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [416.617229] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:504:pipe D] attached scaler id 3.0 to PLANE:478
<7> [416.624591] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [416.625656] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:582] from all active usage due to RMFB ioctl
<7> [416.625682] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:478:plane 4D] because [FB:582] is removed
<7> [416.625694] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:504:pipe D] scaler_user index 3.21: Staged freeing scaler id 0 scaler_users = 0x0
<7> [416.625875] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:478:plane 4D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [416.625999] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 4D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [416.626122] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 4D] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.626246] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 4D] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.626369] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 4D] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.626499] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:504:pipe D] data rate 0 num active planes 0
<7> [416.626633] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [416.626770] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [416.626917] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [416.627049] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [416.627179] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [416.627340] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [416.635842] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:582]
<7> [416.635901] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:504:pipe D] scaler_user index 3.21: staged scaling request for 20x20->2880x1800 scaler_users = 0x200000
<7> [416.636039] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:478:plane 4D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [416.636163] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 4D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [416.636285] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 4D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [416.636406] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 4D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [416.636526] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 4D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [416.636657] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:504:pipe D] data rate 2055280 num active planes 1
<7> [416.636789] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [416.636939] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [416.637076] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [416.637209] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [416.637340] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [416.637487] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:504:pipe D] attached scaler id 3.0 to PLANE:478
<7> [416.646810] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [416.647864] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:582] from all active usage due to RMFB ioctl
<7> [416.647890] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:478:plane 4D] because [FB:582] is removed
<7> [416.647903] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:504:pipe D] scaler_user index 3.21: Staged freeing scaler id 0 scaler_users = 0x0
<7> [416.648044] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:478:plane 4D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [416.648173] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 4D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [416.648297] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 4D] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.648425] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 4D] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.648546] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 4D] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.648676] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:504:pipe D] data rate 0 num active planes 0
<7> [416.648813] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [416.648969] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [416.649102] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [416.649234] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [416.649364] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [416.649522] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [416.658019] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:582]
<7> [416.658083] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:504:pipe D] scaler_user index 3.22: staged scaling request for 20x20->2880x1800 scaler_users = 0x400000
<7> [416.658225] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:488:plane 5D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [416.658353] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:488:plane 5D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [416.658475] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:488:plane 5D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [416.658596] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:488:plane 5D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [416.658718] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:488:plane 5D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [416.658874] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:504:pipe D] data rate 2055280 num active planes 1
<7> [416.659105] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [416.659276] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [416.659441] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [416.659573] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [416.659703] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [416.659863] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:504:pipe D] attached scaler id 3.0 to PLANE:488
<7> [416.669007] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [416.670031] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:582] from all active usage due to RMFB ioctl
<7> [416.670058] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:488:plane 5D] because [FB:582] is removed
<7> [416.670070] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:504:pipe D] scaler_user index 3.22: Staged freeing scaler id 0 scaler_users = 0x0
<7> [416.670213] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:488:plane 5D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [416.670338] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:488:plane 5D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [416.670460] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:488:plane 5D] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.670580] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:488:plane 5D] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.670700] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:488:plane 5D] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.670854] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:504:pipe D] data rate 0 num active planes 0
<7> [416.670996] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [416.671132] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [416.671265] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [416.671396] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [416.671526] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [416.671686] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [416.680228] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:582]
<7> [416.680280] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:504:pipe D] scaler_user index 3.22: staged scaling request for 20x20->2880x1800 scaler_users = 0x400000
<7> [416.680424] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:488:plane 5D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [416.680554] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:488:plane 5D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [416.680678] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:488:plane 5D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [416.680803] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:488:plane 5D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21
<7> [416.681003] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:488:plane 5D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22
<7> [416.681166] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:504:pipe D] data rate 2055280 num active planes 1
<7> [416.681305] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [416.681440] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [416.681571] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [416.681701] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [416.681843] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [416.681998] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:504:pipe D] attached scaler id 3.0 to PLANE:488
<7> [416.691254] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [416.692296] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:582] from all active usage due to RMFB ioctl
<7> [416.692324] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:488:plane 5D] because [FB:582] is removed
<7> [416.692336] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:504:pipe D] scaler_user index 3.22: Staged freeing scaler id 0 scaler_users = 0x0
<7> [416.692478] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:488:plane 5D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [416.692607] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:488:plane 5D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [416.692730] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:488:plane 5D] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.692866] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:488:plane 5D] blocks 5, 33, 33, 39, 39, 57, 0, 0, 19, 7, 21 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.692993] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:488:plane 5D] min_ddb 7, 38, 38, 44, 44, 64, 0, 0, 20, 9, 22 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.693122] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:504:pipe D] data rate 0 num active planes 0
<7> [416.693255] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [416.693391] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [416.693532] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [416.693666] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [416.693797] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [416.693992] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<6> [416.702856] [IGT] kms_plane_scaling: finished subtest pipe-D, SUCCESS
<6> [416.703510] [IGT] kms_plane_scaling: finished subtest plane-upscale-20x20-with-rotation, SUCCESS
<7> [416.704206] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:582]
<6> [416.704643] [IGT] kms_plane_scaling: exiting, ret=0
<7> [416.705142] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [416.750638] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:507:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [416.751228] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:506:DDI A/PHY A][CRTC:150:pipe A] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [416.751673] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 link rate required 1926825 available 2160000
<7> [416.752089] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:150:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [416.752543] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:506:DDI A/PHY A] [CRTC:150:pipe A]
<7> [416.752931] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.enable (expected no, found yes)
<7> [416.753214] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected no, found yes)
<7> [416.753447] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)
<7> [416.753655] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in lane_count (expected 0, found 4)
<7> [416.753899] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 7483046/8388608 link 498869/524288)
<7> [416.754112] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [416.754316] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [416.754515] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)
<7> [416.754660] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)
<7> [416.754781] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)
<7> [416.754916] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)
<7> [416.755039] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)
<7> [416.755160] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)
<7> [416.755283] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)
<7> [416.755409] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1801)
<7> [416.755532] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)
<7> [416.755661] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)
<7> [416.755846] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1878)
<7> [416.756022] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1878)
<7> [416.756204] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)
<7> [416.756381] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)
<7> [416.756518] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)
<7> [416.756645] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)
<7> [416.756772] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)
<7> [416.756914] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)
<7> [416.757043] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)
<7> [416.757166] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1801)
<7> [416.757288] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)
<7> [416.757409] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)
<7> [416.757529] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1878)
<7> [416.757650] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1878)
<7> [416.757775] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [416.757915] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [416.758038] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [416.758160] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)
<7> [416.758281] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [416.758402] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 513820)
<7> [416.758521] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 513820)
<7> [416.758644] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)
<7> [416.758766] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in set_context_latency (expected 0, found 1)
<7> [416.758953] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset
<7> [416.759135] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.enable (expected yes, found no)
<7> [416.759312] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.active (expected yes, found no)
<7> [416.759496] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in cpu_transcoder (expected 3, found -1)
<7> [416.759646] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in lane_count (expected 4, found 0)
<7> [416.759772] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 498869/524288, found tu 0, data 0/0 link 0/0)
<7> [416.759911] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [416.760035] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [416.760158] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)
<7> [416.760284] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)
<7> [416.760408] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)
<7> [416.760532] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)
<7> [416.760655] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)
<7> [416.760778] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)
<7> [416.760915] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)
<7> [416.761039] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1801, found 0)
<7> [416.761165] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)
<7> [416.761289] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)
<7> [416.761413] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1878, found 0)
<7> [416.761534] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1878, found 0)
<7> [416.761657] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)
<7> [416.761780] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)
<7> [416.761946] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)
<7> [416.762121] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)
<7> [416.762297] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)
<7> [416.762470] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)
<7> [416.762630] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)
<7> [416.762763] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1801, found 0)
<7> [416.762936] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)
<7> [416.763063] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)
<7> [416.763185] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1878, found 0)
<7> [416.763306] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1878, found 0)
<7> [416.763426] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [416.763548] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [416.763670] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [416.763789] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in enhanced_framing (expected yes, found no)
<7> [416.763948] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [416.764069] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 513820, found 0)
<7> [416.764190] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 513820, found 0)
<7> [416.764312] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in port_clock (expected 540000, found 0)
<7> [416.764434] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:504:pipe D] fastset requirement not met in set_context_latency (expected 1, found 0)
<7> [416.764556] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:504:pipe D] fastset requirement not met, forcing full modeset
<7> [416.764679] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:504:pipe D] releasing DPLL 0
<7> [416.764954] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7> [416.765446] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:150:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x8 -> 0x1
<7> [416.765952] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:504:pipe D] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x8 -> 0x1
<7> [416.766082] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [416.766203] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:144:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95
<7> [416.766321] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [416.766439] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [416.766555] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [416.766670] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [416.766785] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:498:cursor D] ddb (1953 - 2048) -> ( 0 - 0), size 95 -> 0
<7> [416.766935] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 2055280 num active planes 1
<7> [416.767065] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [416.767192] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [416.767315] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [416.767437] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [416.767562] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [416.767683] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:150:pipe A] min cdclk: 0 kHz -> 256910 kHz
<7> [416.767850] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:504:pipe D] min cdclk: 256910 kHz -> 0 kHz
<7> [416.768063] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:150:pipe A] allocated DPLL 0
<7> [416.768241] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:150:pipe A] reserving DPLL 0
<7> [416.768416] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:150:pipe A] enable: yes [modeset]
<7> [416.768553] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [416.768681] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [416.768807] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>
<7> [416.768952] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [416.769074] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0
<7> [416.769196] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0
<7> [416.769314] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64
<7> [416.769434] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [416.769554] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled
<7> [416.769675] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled
<7> [416.769798] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [416.769941] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0
<7> [416.770063] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [416.770186] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 4, length 14
<7> [416.770305] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB
<7> [416.770424] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB
<7> [416.770543] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0
<7> [416.770663] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range
<7> [416.770805] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined
<7> [416.771000] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1
<7> [416.771176] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 1
<7> [416.771348] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1878, vmax: 1878, flipline: 1878, pipeline full: 0, guardband: 76 vsync start: 75, vsync end: 69
<7> [416.771562] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1878, vmax vtotal: 1878
<7> [416.771716] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [416.771853] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [416.771976] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [416.772098] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa
<7> [416.772218] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa
<7> [416.772342] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa
<7> [416.772465] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820, min cdclk 256910
<7> [416.772588] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0
<7> [416.772708] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [416.772839] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [416.772959] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0
<7> [416.773079] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [416.773200] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: fracen: yes,
<7> [416.773320] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] quot: 40960, rem: 0, den: 1,
<7> [416.773439] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 140, tx_clk_div: 0.
<7> [416.773559] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state:
<7> [416.773676] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21
<7> [416.773796] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7> [416.773943] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [416.774113] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [416.774286] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7> [416.774462] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7> [416.774651] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [416.774802] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [416.774964] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [416.775087] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [416.775207] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [416.775330] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [416.775455] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [416.775578] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [416.775700] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [416.775829] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [416.775952] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [416.776075] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [416.776199] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [416.776321] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:565] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [416.776445] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [416.776567] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [416.776687] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 2A] fb: [NOFB], visible: no
<7> [416.776808] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 3A] fb: [NOFB], visible: no
<7> [416.776949] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:124:plane 4A] fb: [NOFB], visible: no
<7> [416.777073] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:134:plane 5A] fb: [NOFB], visible: no
<7> [416.777244] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:144:cursor A] fb: [NOFB], visible: no
<7> [416.777422] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:504:pipe D] enable: no [modeset]
<7> [416.777606] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:388:plane 1D] fb: [NOFB], visible: no
<7> [416.777793] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:418:plane 2D] fb: [NOFB], visible: no
<7> [416.777969] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:448:plane 3D] fb: [NOFB], visible: no
<7> [416.778091] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:478:plane 4D] fb: [NOFB], visible: no
<7> [416.778213] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:488:plane 5D] fb: [NOFB], visible: no
<7> [416.778334] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:498:cursor D] fb: [NOFB], visible: no
<7> [416.778545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A
<7> [416.778716] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x28000000)
<7> [416.779046] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]
<7> [416.981050] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:507:eDP-1] set backlight PWM = 0
<7> [416.981764] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe D
<7> [416.994027] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turn panel power off
<7> [416.994264] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000
<7> [416.994559] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [416.994827] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:506:DDI A/PHY A] - short
<7> [416.995147] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [417.045133] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [417.045745] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x8, on? 1) for [CRTC:504:pipe D]
<7> [417.046070] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:506:DDI A/PHY A]
<7> [417.047078] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [417.047626] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:506:DDI A/PHY A] - long
<7> [417.047813] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0
<7> [417.048140] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [417.048341] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A
<7> [417.048720] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:506:DDI A/PHY A]
<7> [417.049379] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0x2000071 0x13421c72)
<7> [417.049620] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:506:DDI A/PHY A]
<7> [417.049861] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:515:DDI B/PHY B]
<7> [417.050072] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:517:DP-MST A]
<7> [417.050269] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:518:DP-MST B]
<7> [417.050459] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:519:DP-MST C]
<7> [417.050612] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:520:DP-MST D]
<7> [417.050767] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:533:DDI TC1/PHY TC1]
<7> [417.050990] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:535:DP-MST A]
<7> [417.051199] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:536:DP-MST B]
<7> [417.051383] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:537:DP-MST C]
<7> [417.051512] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:538:DP-MST D]
<7> [417.051636] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:542:DDI TC2/PHY TC2]
<7> [417.051833] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:546:DDI TC3/PHY TC3]
<7> [417.052017] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:548:DP-MST A]
<7> [417.052184] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:549:DP-MST B]
<7> [417.052337] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:550:DP-MST C]
<7> [417.052457] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:551:DP-MST D]
<7> [417.052576] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:555:DDI TC4/PHY TC4]
<7> [417.052695] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:557:DP-MST A]
<7> [417.052834] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:558:DP-MST B]
<7> [417.052971] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:559:DP-MST C]
<7> [417.053107] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:560:DP-MST D]
<7> [417.053275] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf
<7> [417.053501] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: no -> yes (pipe: *)
<7> [417.053633] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 4 (mbus joined: yes)
<7> [417.053842] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A
<7> [417.054845] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:150:pipe A]
<7> [417.055017] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0
<7> [417.056678] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turn panel power on
<7> [417.056847] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 wait for panel power cycle (489 ms remaining)
<7> [417.549163] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [417.599882] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [417.600428] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 wait for panel power on
<7> [417.600987] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [417.632247] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [417.632878] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:506:DDI A/PHY A] - long
<7> [417.633389] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [417.633916] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:506:DDI A/PHY A]
<7> [417.806245] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [417.807065] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turning VDD on
<7> [417.807627] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [417.811318] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80
<7> [417.812745] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [417.813352] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07
<7> [417.814443] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [417.815348] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [417.816299] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Clock recovery OK
<7> [417.816416] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Using DP training pattern TPS3
<7> [417.817732] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [417.817849] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4
<7> [417.818438] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A
<7> [417.818678] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]
<7> [417.818824] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A
<7> [417.818996] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:507:eDP-1] set backlight PWM = 13892
<7> [417.829831] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [417.831317] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:507:eDP-1]
<7> [417.831546] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:150:pipe A]
<7> [417.833931] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D
<7> [417.834114] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating disabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0xa8000000)
<7> [417.834339] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [417.834502] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:504:pipe D]
<7> [417.835118] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [417.841136] Console: switching to colour frame buffer device 180x56
Created at 2026-02-10 01:38:15