igt@i915_pm_rpm@module-reload on fi-skl-6600u@IGT

Detail	Value
Duration	13.01 seconds
Igt-Version	IGT-Version: 2.3-gc49da3be7 (x86_64) (Linux: 6.19.0-CI_DRM_17961-g5e0595fbb024+ x86_64)
Out	Using IGT_SRANDOM=1770661824 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff88820aed5820 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] hsw_get_pipe_config+0x1b9/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x740 [i915] intel_atomic_commit_tail+0x12e0/0x1d70 [i915] intel_atomic_commit+0x2e8/0x330 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x407/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 __x64_sys_ioctl+0xa5/0x100 Starting subtest: module-reload Reloading i915 with disable_display=1 mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 2 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff88810c0f5820 has 1/2 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get+0x1a/0x30 [i915] intel_display_rpm_get+0x1f/0x30 [i915] intel_display_power_get+0x22/0x70 [i915] intel_audio_component_get_power+0x2f/0x180 [i915] snd_hdac_display_power+0x8a/0x1c0 [snd_hda_core] azx_probe_continue+0x24f/0x9f0 [snd_hda_intel] azx_probe_work+0x15/0x20 [snd_hda_intel] process_one_work+0x22e/0x6b0 worker_thread+0x1e8/0x3d0 kthread+0x11f/0x250 ret_from_fork+0x344/0x3a0 ret_from_fork_asm+0x1a/0x30 ref_tracker: intel_runtime_pm@ffff88810c0f5820 has 1/2 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get+0x1a/0x30 [i915] intel_display_rpm_get+0x1f/0x30 [i915] intel_display_power_get+0x22/0x70 [i915] intel_pps_vdd_on_unlocked+0xbd/0x360 [i915] intel_dp_aux_xfer+0x12b/0x960 [i915] intel_dp_aux_transfer+0xd4/0x330 [i915] drm_dp_dpcd_access+0xc3/0x160 [drm_display_helper] drm_dp_dpcd_read+0x87/0x160 [drm_display_helper] intel_alpm_init+0x39/0x90 [i915] intel_dp_init_connector+0x9c4/0x14e0 [i915] intel_ddi_init+0xd03/0x1220 [i915] intel_bios_for_each_encoder+0x39/0x60 [i915] intel_setup_outputs+0x1f4/0xc20 [i915] intel_display_driver_probe_nogem+0x110/0x1e0 [i915] Reloading i915 with mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff888143d8d820 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] hsw_get_pipe_config+0x1b9/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x740 [i915] intel_atomic_commit_tail+0x12e0/0x1d70 [i915] intel_atomic_commit+0x2e8/0x330 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x407/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 __x64_sys_ioctl+0xa5/0x100 Subtest module-reload: SUCCESS (13.009s)
Err	Starting subtest: module-reload Subtest module-reload: SUCCESS (13.009s)
Dmesg	<6> [288.124175] Console: switching to colour dummy device 80x25 <6> [288.125525] [IGT] i915_pm_rpm: executing <7> [288.128767] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [288.129445] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [288.129458] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [288.130091] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [288.130443] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [288.130980] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [288.131471] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [288.131483] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [288.131491] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [288.131528] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no <7> [288.131904] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [288.132263] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [288.134442] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes: <7> [288.134455] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [288.134467] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [288.134668] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [288.134679] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [288.139181] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [288.139327] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [288.139338] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [288.140316] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [288.140715] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [288.141275] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [288.141708] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [288.141718] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [288.142071] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [288.145331] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [288.145342] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [288.145771] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [288.145902] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [288.145913] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [288.150389] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [288.150480] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [288.150489] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [288.151070] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [288.151425] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [288.151990] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [288.152361] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [288.152371] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [288.152704] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [288.155748] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [288.155758] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [288.156042] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [288.162781] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [288.162793] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [288.167123] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [288.167812] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [288.167822] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [288.168334] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [288.168554] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [288.169033] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [288.169293] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [288.169301] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [288.169512] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [288.172553] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [288.172563] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [288.172888] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [288.173587] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [288.173597] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [288.178005] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [288.178964] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [288.178977] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [288.179675] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [288.179983] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [288.180530] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [288.180965] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [288.180976] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [288.181347] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [288.185161] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [288.185173] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [288.185591] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [288.186389] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [288.186401] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [288.186860] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [288.187225] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [288.187591] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [288.188015] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [288.188027] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [288.188035] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [288.188072] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no <7> [288.188449] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [288.188838] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [288.190178] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes: <7> [288.190208] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [288.190220] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [288.190264] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [288.190274] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [288.194795] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [288.194838] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [288.194849] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [288.195498] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [288.195868] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [288.196431] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [288.196842] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [288.196853] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [288.197185] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [288.200378] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [288.200388] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [288.200816] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [288.200859] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [288.200869] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [288.205335] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [288.205375] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [288.205384] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [288.206039] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [288.206404] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [288.206968] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [288.207350] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [288.207359] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [288.207891] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [288.211128] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [288.211139] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [288.211531] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [288.212287] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:144] <7> [288.344536] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [289.266471] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:58:pipe A] <7> [289.267245] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [289.268529] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [289.269250] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [289.269565] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [289.269874] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [289.270178] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [289.270438] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [289.270716] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [289.271019] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [289.271279] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [289.271539] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [289.271814] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [289.272143] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [289.272394] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [289.272659] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [289.272963] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [289.273211] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [289.273461] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [289.273744] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [289.274046] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [289.274303] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [289.274612] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [289.274891] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [289.275181] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [289.275486] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [289.275773] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [289.276070] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [289.276370] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [289.276616] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [289.276890] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [289.277148] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [289.277397] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [289.277664] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [289.277906] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [289.278147] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [289.278390] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [289.278631] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [289.278893] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [289.279133] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [289.279375] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset <7> [289.279616] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0 <7> [289.279935] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [289.280213] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [289.280493] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [289.280746] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [289.281000] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [289.281236] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [289.281469] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [289.281798] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [289.282118] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz <7> [289.282538] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [289.282941] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [289.283314] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [289.283703] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset] <7> [289.284075] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no <7> [289.284431] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [289.284713] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no <7> [289.285137] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [289.286883] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [289.494121] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0 <7> [289.496292] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [289.514443] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off <7> [289.514947] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [289.515813] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time <7> [289.516428] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short <7> [289.517283] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [289.569041] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [289.569592] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [289.570390] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long <7> [289.571718] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [289.571781] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [289.574897] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [289.575279] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A] <7> [289.576269] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [289.577310] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [289.578616] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [289.581473] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A] <7> [289.582759] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B] <7> [289.583983] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A] <7> [289.584979] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B] <7> [289.586195] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C] <7> [289.587213] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C] <7> [289.588443] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A] <7> [289.589434] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B] <7> [289.590704] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C] <7> [289.591624] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1] <7> [289.593847] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [289.597590] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:83:pipe B] <7> [289.598947] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:108:pipe C] <7> [289.702181] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [289.703967] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [289.705532] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [289.707461] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [289.711295] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [289.729872] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [289.811457] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:110:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [289.812504] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:109:DDI A/PHY A][CRTC:58:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [289.813625] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000 <7> [289.815208] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [289.817295] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:109:DDI A/PHY A] [CRTC:58:pipe A] <7> [289.818860] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [289.820761] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [289.822381] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [289.824054] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [289.825653] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [289.827372] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [289.828977] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [289.830544] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [289.832112] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [289.833591] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [289.835158] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [289.836598] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [289.838168] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [289.839714] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [289.841277] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [289.842850] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [289.844321] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [289.845865] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [289.847258] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [289.848621] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [289.849992] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [289.851352] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [289.852725] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [289.854087] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [289.855484] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [289.856835] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [289.858193] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [289.859552] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [289.860901] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [289.862253] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [289.863621] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [289.864988] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [289.866349] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [289.867731] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [289.869101] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [289.870458] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [289.871822] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [289.873179] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [289.874540] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [289.875904] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset <7> [289.877490] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [289.878853] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [289.880180] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [289.881505] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [289.882821] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [289.884150] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [289.885486] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [289.887100] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [289.888610] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [289.889976] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [289.891334] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [289.892729] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [289.894083] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:58:pipe A] allocated DPLL 0 <7> [289.895475] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:58:pipe A] reserving DPLL 0 <7> [289.896869] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: yes [modeset] <7> [289.898207] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [289.899566] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [289.900594] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [289.901934] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [289.903277] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [289.904619] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [289.905943] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [289.907221] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [289.908199] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [289.909460] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [289.910798] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [289.912140] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [289.913465] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [289.914788] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [289.915823] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [289.916636] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [289.917846] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [289.918821] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [289.919712] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [289.920570] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [289.921452] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [289.922216] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [289.922869] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [289.923533] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [289.924134] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [289.924850] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [289.925397] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [289.926011] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [289.926706] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [289.927244] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [289.927790] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [289.928386] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [289.929065] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [289.929736] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [289.930379] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [289.931033] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [289.931688] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [289.932280] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [289.932755] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [289.933262] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [289.933725] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [289.934234] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [289.934638] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [289.935082] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:111] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [289.935585] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [289.936024] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [289.936438] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [289.936872] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no <7> [289.948761] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [289.956888] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [289.957137] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [289.957556] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [289.958193] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [289.958900] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [289.959596] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A] <7> [289.959994] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B] <7> [289.960339] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A] <7> [289.960586] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B] <7> [289.960870] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C] <7> [289.961158] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C] <7> [289.961390] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A] <7> [289.961620] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B] <7> [289.961883] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C] <7> [289.962354] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:58:pipe A] <7> [289.962603] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [289.963111] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power on <7> [289.963456] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (108 ms remaining) <7> [290.078117] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [290.087922] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [290.088384] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power on <7> [290.088911] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003 <7> [290.138196] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [290.139304] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long <7> [290.140370] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [290.141371] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [290.298552] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [290.299880] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [290.301555] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [290.304094] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on <7> [290.305204] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b <7> [290.311490] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [290.312771] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [290.315322] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [290.316428] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [290.317727] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [290.321348] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Clock recovery OK <7> [290.322489] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [290.323456] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [290.326583] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [290.327561] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [290.328575] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [290.332034] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [290.333071] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [290.335011] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [290.337475] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [290.338491] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [290.340187] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 37 <7> [290.353366] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [290.358947] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1] <7> [290.360197] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [290.365657] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [290.367440] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [290.371548] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <6> [290.373077] [IGT] i915_pm_rpm: starting subtest module-reload <7> [290.373524] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [290.374879] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [290.376318] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [290.377757] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [290.377795] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [290.379078] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [290.384732] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [290.384773] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [290.386236] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [290.391931] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [290.394012] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [290.395352] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [290.397053] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [290.398444] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [290.398482] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [290.400030] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [290.405811] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [290.405851] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [290.525263] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [290.525953] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [290.539569] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [290.565425] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [290.565898] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [290.578746] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [290.611504] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [290.614071] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [290.621609] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [290.622163] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [290.622626] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [290.626621] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [290.627246] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [290.628094] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [290.628777] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [290.629260] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [290.629772] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [290.631076] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [290.738490] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [290.739736] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [290.740553] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [290.741395] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [290.745042] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:111] is removed <7> [290.745253] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [290.746154] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [290.747331] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [290.748410] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [290.749433] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [290.751020] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [290.770361] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [290.774809] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [290.775652] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [290.776492] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [290.777576] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [290.778651] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [290.779729] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [290.781146] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [290.782243] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [290.783316] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [290.784473] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [290.785541] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [290.786630] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [290.787967] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [290.789093] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [290.790188] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [290.791290] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [290.792398] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [290.793500] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [290.794362] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [290.795295] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [290.796360] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [290.797433] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [290.798492] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [290.799560] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [290.800441] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [290.801287] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [290.802356] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [290.803428] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [290.804497] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [290.805574] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [290.806522] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [290.807243] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [290.808192] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [290.809281] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [290.810352] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [290.811418] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [290.812490] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [290.813490] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [290.814367] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [290.815438] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset <7> [290.816510] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0 <7> [290.817762] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [290.818957] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [290.820252] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [290.821050] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [290.821737] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [290.822789] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [290.823863] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset] <7> [290.824922] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no <7> [290.825992] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [290.827034] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no <7> [290.829065] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [291.038178] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0 <7> [291.040535] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [291.056827] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off <7> [291.057992] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [291.059125] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short <7> [291.060331] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time <7> [291.062083] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [291.113025] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [291.113798] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [291.114320] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long <7> [291.115500] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [291.115823] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [291.117611] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [291.117808] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A] <7> [291.122066] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [291.124030] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [291.128169] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A] <7> [291.130228] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B] <7> [291.131911] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A] <7> [291.133587] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B] <7> [291.135410] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C] <7> [291.137186] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C] <7> [291.138864] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A] <7> [291.140644] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B] <7> [291.142471] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C] <7> [291.144269] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1] <7> [291.147824] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [291.219778] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [291.268898] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:110:eDP-1] removing connector from sysfs <7> [291.290927] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:118:DP-1] removing connector from sysfs <7> [291.298597] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:127:HDMI-A-1] removing connector from sysfs <7> [291.308520] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:133:DP-2] removing connector from sysfs <7> [291.316111] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:139:HDMI-A-2] removing connector from sysfs <7> [291.350041] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (265 ms remaining) <7> [291.622454] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [291.695273] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [292.362624] [IGT] Reloading i915 w/o display <5> [293.209897] Setting dangerous option force_probe - tainting kernel <6> [293.222364] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0 <7> [293.224151] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K <7> [293.224571] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [293.224866] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH <7> [293.225276] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [293.225757] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [293.226351] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [293.226719] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [293.228034] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [293.228395] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [293.228764] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [293.229094] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [293.229107] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [293.230018] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [293.230076] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [293.230489] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [293.230898] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7716 MiB [mem 0x00000000-0x1e24e0fff], io: n/a <7> [293.231232] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a <7> [293.232142] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018 <7> [293.232642] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [293.233063] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [293.233466] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [293.233873] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [293.242794] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [293.243071] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [293.243317] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [293.243563] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [293.243848] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [293.244250] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [293.244649] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no <7> [293.245059] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [293.245459] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [293.245844] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no <7> [293.246242] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes <7> [293.246645] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no <7> [293.247062] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3 <7> [293.247459] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [293.247866] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0 <7> [293.248264] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7> [293.249436] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [293.249871] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203 <7> [293.250285] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [293.250698] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [293.251121] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [293.251527] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [293.251952] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 850) <7> [293.252360] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [293.252781] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [293.253194] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [293.253603] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [293.254020] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136) <7> [293.254418] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [293.254831] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [293.255228] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [293.255637] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [293.256051] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [293.256460] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [293.256865] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [293.257261] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [293.257658] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [293.258065] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [293.258459] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [293.258864] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [293.259273] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [293.259699] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [293.260218] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [293.260651] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [293.261072] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [293.261471] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [293.261872] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [293.262268] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [293.262803] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [293.263206] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [293.263608] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [293.264034] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [293.264524] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [293.264942] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [293.265350] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [293.265772] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [293.267018] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <7> [293.268803] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [293.269211] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [293.269256] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [293.269669] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [293.269913] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [293.270092] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [293.270406] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <6> [293.270924] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [293.270812] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7> [293.271203] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec) <7> [293.271583] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec) <7> [293.271957] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec) <7> [293.272263] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec) <7> [293.272512] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec) <7> [293.272810] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec) <7> [293.273187] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec) <7> [293.273564] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec) <7> [293.273969] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec) <7> [293.274346] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec) <7> [293.274623] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec) <7> [293.274916] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec) <7> [293.275195] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec) <7> [293.275583] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec) <7> [293.276003] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec) <7> [293.281146] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available. <7> [293.285167] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [293.285655] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:109:DDI A/PHY A] Using AUX CH A (VBT) <7> [293.286148] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:109:DDI A/PHY A] <7> [293.291693] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [293.292143] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [293.292544] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [293.292955] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [293.293366] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [293.293774] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [293.294168] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP <7> [293.294566] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [293.294972] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0 <7> [293.295390] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0 <7> [293.296392] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:109:DDI A/PHY A] initial power sequencer: PPS 0 <7> [293.296833] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [293.297222] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [293.297609] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [293.298025] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [293.298416] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [293.298878] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [293.299770] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on <7> [293.300175] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [293.300589] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [293.310914] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [293.311267] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [293.311528] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [293.521804] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [293.522652] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [293.524627] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00 <7> [293.529728] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [293.548233] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [293.548290] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [293.548330] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [293.548984] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [293.550875] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [293.552475] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:110:eDP-1] DRRS type: static <7> [293.554462] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:110:eDP-1] Using native PCH PWM for backlight control <7> [293.555965] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:110:eDP-1] backlight initialized, disabled, brightness 0/937 <7> [293.558235] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [293.559631] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [293.560930] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [293.562412] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [293.564019] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [293.565553] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [293.568255] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:117:DDI B/PHY B] Using AUX CH B (VBT) <7> [293.569857] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:117:DDI B/PHY B] <7> [293.574181] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [293.576029] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:117:DDI B/PHY B] <7> [293.577338] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:117:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [293.580512] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:132:DDI C/PHY C] Using AUX CH C (VBT) <7> [293.581977] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:132:DDI C/PHY C] <7> [293.585373] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [293.587197] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:132:DDI C/PHY C] <7> [293.588512] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:132:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [293.591997] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled <6> [293.593392] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem <7> [293.594488] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] hw state readout: disabled <7> [293.596505] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] hw state readout: disabled <7> [293.598834] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] hw state readout: disabled <7> [293.600950] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] hw state readout: disabled, pipe A <7> [293.603166] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A <7> [293.605436] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] hw state readout: disabled, pipe A <7> [293.607605] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] hw state readout: disabled, pipe B <7> [293.609255] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] hw state readout: disabled, pipe B <7> [293.611476] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] hw state readout: disabled, pipe B <7> [293.613703] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] hw state readout: disabled, pipe C <7> [293.616026] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] hw state readout: disabled, pipe C <7> [293.618104] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] hw state readout: disabled, pipe C <7> [293.619855] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DDI A/PHY A] hw state readout: disabled, pipe A <7> [293.622101] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DDI B/PHY B] hw state readout: disabled, pipe A <7> [293.624190] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST A] hw state readout: disabled, pipe A <7> [293.626213] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST B] hw state readout: disabled, pipe B <7> [293.628108] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST C] hw state readout: disabled, pipe C <7> [293.630438] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:132:DDI C/PHY C] hw state readout: disabled, pipe A <7> [293.632390] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST A] hw state readout: disabled, pipe A <7> [293.633587] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST B] hw state readout: disabled, pipe B <7> [293.634807] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST C] hw state readout: disabled, pipe C <7> [293.635927] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [293.636958] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [293.638327] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [293.639664] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [293.641281] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:110:eDP-1] hw state readout: disabled <7> [293.642224] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:118:DP-1] hw state readout: disabled <7> [293.642998] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:127:HDMI-A-1] hw state readout: disabled <7> [293.643697] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:133:DP-2] hw state readout: disabled <7> [293.644482] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:139:HDMI-A-2] hw state readout: disabled <7> [293.645112] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] min_cdclk 0 kHz <7> [293.645663] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] min_cdclk 0 kHz <7> [293.646284] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] min_cdclk 0 kHz <7> [293.646996] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] min_cdclk 0 kHz <7> [293.647680] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] min_cdclk 0 kHz <7> [293.648289] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] min_cdclk 0 kHz <7> [293.649009] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] min_cdclk 0 kHz <7> [293.649554] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] min_cdclk 0 kHz <7> [293.650142] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] min_cdclk 0 kHz <7> [293.650672] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] min_cdclk 0 kHz <7> [293.651127] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] min_cdclk 0 kHz <7> [293.651731] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] min_cdclk 0 kHz <7> [293.652229] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:58:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [293.652711] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:83:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [293.653172] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:108:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [293.654052] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [setup_hw_state] <7> [293.654488] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [setup_hw_state] <7> [293.654944] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [setup_hw_state] <7> [293.655449] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [293.656153] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [293.656540] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [293.656987] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [293.657485] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7> [293.660591] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [293.660966] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [293.661299] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0 <7> [293.683769] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [293.684021] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [293.684219] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [293.684415] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [293.684613] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 0: start 0x8 <7> [293.684890] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 1: start 0x108 <7> [293.685209] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 2: start 0x208 <7> [293.685471] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 3: start 0x308 <7> [293.685748] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 4: start 0x3c8 <7> [293.686055] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 0: start 0x8 <7> [293.686309] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 1: start 0x108 <7> [293.686563] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 2: start 0x208 <7> [293.686902] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 3: start 0x308 <7> [293.687192] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 4: start 0x3c8 <7> [293.687465] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 0: start 0x8 <7> [293.687720] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 1: start 0x108 <7> [293.688103] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 2: start 0x208 <7> [293.688409] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 3: start 0x308 <7> [293.688664] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 4: start 0x3c8 <7> [293.689185] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [fastset] <7> [293.689446] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [fastset] <7> [293.689700] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [fastset] <7> [293.690240] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [293.690904] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:83:pipe B] <7> [293.691338] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:108:pipe C] <7> [293.691770] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [293.696567] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:110:eDP-1] adding connector to sysfs <7> [293.698053] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:110:eDP-1] backlight device intel_backlight registered <7> [293.698533] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:110:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [293.699405] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [293.702109] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:110:eDP-1] generating connector hotplug event <7> [293.702244] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:118:DP-1] adding connector to sysfs <7> [293.705044] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [293.706915] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:118:DP-1] generating connector hotplug event <7> [293.707023] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:127:HDMI-A-1] adding connector to sysfs <7> [293.709667] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:127:HDMI-A-1] generating connector hotplug event <7> [293.710272] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:133:DP-2] adding connector to sysfs <7> [293.713132] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [293.716957] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:133:DP-2] generating connector hotplug event <7> [293.717070] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:139:HDMI-A-2] adding connector to sysfs <7> [293.718066] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:139:HDMI-A-2] generating connector hotplug event <6> [293.718191] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7> [293.724076] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [293.754522] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [293.766249] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input35 <7> [293.770148] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [293.775629] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:58:pipe A] not active, skipping <7> [293.776113] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:83:pipe B] not active, skipping <7> [293.776522] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:108:pipe C] not active, skipping <7> [293.776945] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config <7> [293.777829] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [293.778238] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:118:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [293.778647] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [293.779068] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:127:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [293.779261] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [293.780406] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [293.781788] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [293.782233] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:133:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [293.782646] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [293.783066] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:139:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [293.784159] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [293.785196] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [293.785213] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [293.785642] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] status updated from unknown to disconnected <7> [293.785664] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] disconnected <7> [293.785686] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [293.786835] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:110:eDP-1] EDID changed, epoch counter 2 <7> [293.786868] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [293.786881] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [293.787309] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [293.787324] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [293.787334] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [293.787725] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [293.787767] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [293.789020] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [293.789440] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [293.789457] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [293.789468] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [293.789884] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [293.790282] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [293.790294] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? no <7> [293.790323] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no <7> [293.790332] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no <7> [293.790340] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no <7> [293.790348] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no <7> [293.790407] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [293.790427] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [293.790534] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [293.790549] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [293.796188] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9 <7> [293.796659] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0 <7> [293.796987] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7> [293.797327] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no <7> [293.797601] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no <7> [293.797973] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7> [293.798355] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7> [293.798651] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no <7> [293.799085] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7> [293.799503] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7> [293.799944] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7> [293.800349] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7> [293.800801] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7> [293.801198] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7> [293.801601] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7> [293.801928] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes <7> [293.802248] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7> [293.802520] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7> [293.802823] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7> [293.803225] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7> [293.803516] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no <7> [293.803850] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz <7> [293.804505] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [293.804643] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [293.804658] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [293.805082] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] disconnected <7> [293.805098] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [293.805109] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [293.805503] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [293.805516] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [293.805526] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [293.805924] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [293.805937] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [293.805947] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [293.806328] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [293.806342] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [293.806353] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [293.806628] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [293.806636] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [293.806644] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? no <7> [293.806652] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no <7> [293.806660] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no <7> [293.806668] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no <7> [293.806675] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no <7> [293.806713] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [293.806727] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [293.806833] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [293.806863] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [293.807031] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [293.807761] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [293.807810] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7> [293.808492] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [293.808517] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [293.808953] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] disconnected <7> [293.808977] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [293.808828] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [293.808988] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [293.809376] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [293.809389] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [293.809265] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [293.809400] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [293.809812] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [293.809683] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [293.810776] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [293.811331] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [293.811764] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [293.811782] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [293.812020] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9 <7> [293.812181] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [293.812195] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [293.812206] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [293.812342] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9 <7> [293.812599] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [293.812610] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [293.812628] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? no <7> [293.812636] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no <7> [293.812643] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no <7> [293.812651] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no <7> [293.812664] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no <7> [293.812662] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9 <7> [293.812961] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [293.813001] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [293.813111] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [293.813141] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [293.813225] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [293.813093] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0 <7> [293.813426] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0 <7> [293.813766] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2 <7> [293.814091] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21 <7> [293.814418] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000 <7> [293.814751] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE <7> [293.815063] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7> [293.815391] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7> [293.815670] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39 <7> [293.815978] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7> [293.816208] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7> [293.816408] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7> [293.816723] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7> [293.817080] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7> [293.817404] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7> [293.817730] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7> [293.818059] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7> [293.818378] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7> [293.818686] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no <7> [293.818935] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no <7> [293.819159] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7> [293.819409] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7> [293.819731] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7> [293.820086] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no <7> [293.820411] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no <7> [293.820736] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7> [293.821063] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7> [293.821383] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes <7> [293.821637] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7> [293.821904] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no <7> [293.822222] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7> [293.822549] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7> [293.822891] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no <7> [293.823216] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no <7> [293.823541] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no <7> [293.823863] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7> [293.824184] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no <7> [293.824500] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7> [293.824805] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7> [293.825120] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7> [293.825437] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7> [293.825760] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no <7> [293.826087] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes <7> [293.826413] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7> [293.826747] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7> [293.827068] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7> [293.827383] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7> [293.827697] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7> [293.827989] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403 <7> [293.828257] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001 <7> [293.828487] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3 <7> [293.828832] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007 <7> [293.829161] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000 <7> [293.829487] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000 <7> [293.829820] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24 <7> [293.830144] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8 <7> [293.830457] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7> [293.830793] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7> [293.831058] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes <6> [293.831275] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [293.831279] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [293.831283] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [293.845209] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6> [293.849883] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7> [293.850286] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [293.851035] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [293.853181] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [293.884561] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [293.884885] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [293.885117] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [293.885344] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [293.885571] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [293.886422] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [293.887119] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [293.887485] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [293.888021] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <6> [293.908360] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36 <6> [293.923296] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input37 <6> [293.924906] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input38 <7> [295.148625] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [296.105155] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD off <7> [296.106150] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [296.107084] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [296.107641] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [296.108055] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [296.108208] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [296.108567] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long <7> [296.108835] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [296.108987] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [296.109890] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [296.110009] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [296.115943] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [296.279772] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [296.304972] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [296.313119] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [296.313499] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [296.313813] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [296.314207] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [296.314598] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [296.315032] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [296.315857] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [296.316513] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [296.317153] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [296.318530] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [296.331961] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [296.332303] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [296.332577] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [296.332888] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [296.333708] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [296.444348] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [296.444764] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [296.445628] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [296.446265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [296.448051] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [296.456349] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [296.456766] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [296.457159] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [296.457527] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [296.458178] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [296.458405] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [296.458625] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [296.458943] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [296.459291] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [296.460239] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [296.461521] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [296.461812] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [296.462114] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [296.462760] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [296.567475] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [296.568434] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [296.570017] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [296.571734] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [296.573605] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [296.574971] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [296.576428] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [296.577831] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [296.579259] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [296.631052] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [296.644599] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:110:eDP-1] removing connector from sysfs <7> [296.653094] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:118:DP-1] removing connector from sysfs <7> [296.655778] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:127:HDMI-A-1] removing connector from sysfs <7> [296.661886] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:133:DP-2] removing connector from sysfs <7> [296.662642] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:139:HDMI-A-2] removing connector from sysfs <7> [296.689719] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [296.690144] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [296.699966] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [297.167979] [IGT] Reloading i915 as normal <5> [298.020449] Setting dangerous option force_probe - tainting kernel <6> [298.033327] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0 <7> [298.035217] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K <7> [298.035611] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [298.035890] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH <7> [298.036181] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [298.036497] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [298.036923] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [298.037194] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [298.038245] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [298.038470] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [298.038671] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [298.038896] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [298.038908] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [298.039535] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [298.039573] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [298.039886] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [298.040136] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7716 MiB [mem 0x00000000-0x1e24e0fff], io: n/a <7> [298.040468] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a <7> [298.041335] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018 <7> [298.041794] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [298.042175] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [298.042447] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [298.042700] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [298.049876] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [298.050154] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [298.050403] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [298.050650] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [298.050942] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [298.051346] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [298.051746] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no <7> [298.052159] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [298.052559] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [298.052975] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no <7> [298.053376] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes <7> [298.053774] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no <7> [298.054182] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3 <7> [298.054580] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [298.054986] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0 <7> [298.055385] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7> [298.056521] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [298.056828] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203 <7> [298.057197] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [298.057461] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [298.057726] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [298.058010] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [298.058332] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 850) <7> [298.058591] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [298.058893] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [298.059237] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [298.059514] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [298.059789] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136) <7> [298.060092] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [298.060390] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [298.060642] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [298.060932] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [298.061236] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [298.061539] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [298.061810] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [298.062156] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [298.062462] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [298.062715] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [298.062988] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [298.063289] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [298.063550] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [298.063840] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [298.064287] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [298.064591] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [298.064901] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [298.065208] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [298.065460] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [298.065712] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [298.066105] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [298.066383] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [298.066640] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [298.067005] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [298.067383] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [298.067643] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [298.067924] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [298.068232] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [298.069102] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <7> [298.070369] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [298.070643] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [298.070799] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [298.071231] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [298.071610] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [298.071680] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [298.072190] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <6> [298.072428] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [298.072505] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7> [298.072755] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec) <7> [298.073053] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec) <7> [298.073315] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec) <7> [298.073562] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec) <7> [298.073811] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec) <7> [298.074112] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec) <7> [298.074375] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec) <7> [298.074652] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec) <7> [298.074918] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec) <7> [298.075185] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec) <7> [298.075434] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec) <7> [298.075683] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec) <7> [298.075974] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec) <7> [298.076237] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec) <7> [298.076488] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec) <7> [298.081228] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available. <7> [298.085045] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [298.085524] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:109:DDI A/PHY A] Using AUX CH A (VBT) <7> [298.086051] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:109:DDI A/PHY A] <7> [298.094831] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [298.095264] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [298.095662] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [298.096081] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [298.096495] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [298.096906] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [298.097303] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP <7> [298.097696] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [298.098102] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0 <7> [298.098498] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0 <7> [298.099289] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:109:DDI A/PHY A] initial power sequencer: PPS 0 <7> [298.099728] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [298.100117] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [298.100490] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [298.100871] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [298.101242] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [298.101657] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [298.102520] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on <7> [298.102944] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [298.103366] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [298.112994] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [298.113321] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [298.113576] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [298.319571] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [298.322439] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [298.325406] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00 <7> [298.331574] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [298.348641] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [298.348687] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [298.348714] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [298.349444] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [298.351476] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [298.353205] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:110:eDP-1] DRRS type: static <7> [298.355210] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:110:eDP-1] Using native PCH PWM for backlight control <7> [298.357018] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:110:eDP-1] backlight initialized, disabled, brightness 0/937 <7> [298.359527] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [298.361182] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [298.362880] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [298.364510] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [298.366182] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [298.367920] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [298.371273] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:117:DDI B/PHY B] Using AUX CH B (VBT) <7> [298.373177] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:117:DDI B/PHY B] <7> [298.378623] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [298.380533] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:117:DDI B/PHY B] <7> [298.382213] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:117:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [298.386038] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:132:DDI C/PHY C] Using AUX CH C (VBT) <7> [298.387982] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:132:DDI C/PHY C] <7> [298.392267] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [298.394146] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:132:DDI C/PHY C] <7> [298.395812] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:132:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [298.399999] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled <6> [298.401772] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem <7> [298.402993] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] hw state readout: disabled <7> [298.405655] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] hw state readout: disabled <7> [298.408337] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] hw state readout: disabled <7> [298.410287] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] hw state readout: disabled, pipe A <7> [298.412262] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A <7> [298.414195] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] hw state readout: disabled, pipe A <7> [298.416193] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] hw state readout: disabled, pipe B <7> [298.418129] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] hw state readout: disabled, pipe B <7> [298.420086] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] hw state readout: disabled, pipe B <7> [298.422050] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] hw state readout: disabled, pipe C <7> [298.424065] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] hw state readout: disabled, pipe C <7> [298.426020] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] hw state readout: disabled, pipe C <7> [298.429481] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DDI A/PHY A] hw state readout: disabled, pipe A <7> [298.431463] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DDI B/PHY B] hw state readout: disabled, pipe A <7> [298.432959] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST A] hw state readout: disabled, pipe A <7> [298.434084] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST B] hw state readout: disabled, pipe B <7> [298.435203] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST C] hw state readout: disabled, pipe C <7> [298.436437] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:132:DDI C/PHY C] hw state readout: disabled, pipe A <7> [298.437574] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST A] hw state readout: disabled, pipe A <7> [298.438689] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST B] hw state readout: disabled, pipe B <7> [298.439806] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST C] hw state readout: disabled, pipe C <7> [298.441042] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [298.442078] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [298.442984] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [298.443890] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [298.444993] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:110:eDP-1] hw state readout: disabled <7> [298.445975] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:118:DP-1] hw state readout: disabled <7> [298.446969] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:127:HDMI-A-1] hw state readout: disabled <7> [298.447980] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:133:DP-2] hw state readout: disabled <7> [298.448964] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:139:HDMI-A-2] hw state readout: disabled <7> [298.449760] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] min_cdclk 0 kHz <7> [298.450583] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] min_cdclk 0 kHz <7> [298.451250] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] min_cdclk 0 kHz <7> [298.451901] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] min_cdclk 0 kHz <7> [298.452524] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] min_cdclk 0 kHz <7> [298.453188] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] min_cdclk 0 kHz <7> [298.453812] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] min_cdclk 0 kHz <7> [298.454467] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] min_cdclk 0 kHz <7> [298.455120] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] min_cdclk 0 kHz <7> [298.455744] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] min_cdclk 0 kHz <7> [298.456392] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] min_cdclk 0 kHz <7> [298.457030] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] min_cdclk 0 kHz <7> [298.457655] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:58:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [298.458295] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:83:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [298.458927] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:108:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [298.459932] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [setup_hw_state] <7> [298.460460] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [setup_hw_state] <7> [298.461006] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [setup_hw_state] <7> [298.461527] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [298.462168] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [298.462605] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [298.463089] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [298.463615] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7> [298.467303] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [298.467868] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [298.468392] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0 <7> [298.492738] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [298.493043] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [298.493242] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [298.493452] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [298.493657] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 0: start 0x8 <7> [298.493954] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 1: start 0x108 <7> [298.494359] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 2: start 0x208 <7> [298.494769] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 3: start 0x308 <7> [298.495277] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 4: start 0x3c8 <7> [298.495694] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 0: start 0x8 <7> [298.496120] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 1: start 0x108 <7> [298.496548] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 2: start 0x208 <7> [298.497056] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 3: start 0x308 <7> [298.497481] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 4: start 0x3c8 <7> [298.497918] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 0: start 0x8 <7> [298.498341] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 1: start 0x108 <7> [298.498765] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 2: start 0x208 <7> [298.499216] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 3: start 0x308 <7> [298.499643] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 4: start 0x3c8 <7> [298.500431] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [fastset] <7> [298.500889] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [fastset] <7> [298.501318] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [fastset] <7> [298.502065] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [298.503012] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:83:pipe B] <7> [298.503704] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:108:pipe C] <7> [298.504403] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [298.512725] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:110:eDP-1] adding connector to sysfs <7> [298.515692] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:110:eDP-1] backlight device intel_backlight registered <7> [298.516208] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:110:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [298.517250] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [298.520336] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:110:eDP-1] generating connector hotplug event <7> [298.520492] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:118:DP-1] adding connector to sysfs <7> [298.522851] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [298.526050] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:118:DP-1] generating connector hotplug event <7> [298.526211] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:127:HDMI-A-1] adding connector to sysfs <7> [298.527488] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:127:HDMI-A-1] generating connector hotplug event <7> [298.527641] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:133:DP-2] adding connector to sysfs <7> [298.529202] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [298.531749] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:133:DP-2] generating connector hotplug event <7> [298.531955] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:139:HDMI-A-2] adding connector to sysfs <7> [298.533158] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:139:HDMI-A-2] generating connector hotplug event <6> [298.533279] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7> [298.540232] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [298.573061] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [298.582693] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input39 <7> [298.585759] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [298.591035] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [298.592345] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:58:pipe A] not active, skipping <7> [298.592787] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:83:pipe B] not active, skipping <7> [298.593215] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:108:pipe C] not active, skipping <7> [298.593616] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config <7> [298.594746] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [298.595755] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:118:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [298.596223] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [298.597291] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [298.597701] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [298.598317] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [298.598762] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [298.598774] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [298.599421] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [298.600909] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [298.604143] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [298.604156] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [298.604648] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:127:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [298.605334] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [298.609880] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:133:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [298.610328] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [298.610999] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [298.611391] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [298.611973] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [298.612401] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [298.612413] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [298.612805] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [298.618570] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [298.618584] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [298.619296] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:139:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [298.620462] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [298.621040] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [298.621057] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [298.621715] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [298.622151] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [298.622552] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [298.623945] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [298.623958] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [298.623964] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [298.623999] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no <7> [298.624311] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [298.624577] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [298.626276] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] status updated from unknown to connected <7> [298.626305] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [298.626609] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes: <7> [298.626619] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [298.626627] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [298.626636] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [298.626645] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [298.631116] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [298.631130] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [298.631139] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [298.631940] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [298.632355] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [298.632942] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [298.633402] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [298.633415] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [298.633809] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [298.639260] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [298.639274] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [298.639736] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [298.639752] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [298.639765] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [298.644264] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [298.644279] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [298.644288] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [298.644882] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [298.645290] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [298.648046] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [298.648428] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [298.648440] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [298.648718] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [298.652535] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [298.652549] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [298.653256] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [298.653291] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? yes <7> [298.653302] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no <7> [298.653311] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no <7> [298.653320] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no <7> [298.653328] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no <7> [298.653442] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [298.653477] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] found preferred mode: 3200x1800 <7> [298.653486] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [298.653515] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:58:pipe A] desired mode 3200x1800 set (0,0) <7> [298.653640] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [298.653694] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] no BIOS fb, allocating a new one <7> [298.660670] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 3200x1800 fb: 0x00180000 <6> [298.662392] fbcon: i915drmfb (fb0) is primary device <6> [298.663641] Console: switching to colour frame buffer device 200x56 <6> [298.663660] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7> [298.663863] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [298.663884] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [298.663673] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9 <7> [298.664186] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0 <7> [298.664629] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [298.664595] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7> [298.664654] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [298.665036] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no <7> [298.665326] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [298.665429] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no <7> [298.665734] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [298.665850] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7> [298.666185] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [298.666255] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7> [298.666671] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no <7> [298.667111] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7> [298.667489] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [298.667502] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [298.667524] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [298.667521] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7> [298.667592] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no <7> [298.667939] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7> [298.668017] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [298.668334] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7> [298.668426] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [298.668745] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7> [298.669181] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7> [298.669586] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7> [298.670018] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes <7> [298.670419] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7> [298.670842] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7> [298.671200] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes: <7> [298.671222] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [298.671235] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [298.671248] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [298.671261] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [298.671262] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7> [298.671677] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7> [298.672096] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no <7> [298.672508] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz <7> [298.674568] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7> [298.675004] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [298.675430] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [298.676483] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [298.676930] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [298.677336] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [298.678300] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [298.678321] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [298.678303] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9 <7> [298.678335] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [298.678648] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9 <7> [298.678986] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9 <7> [298.679309] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0 <7> [298.679307] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [298.679627] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0 <7> [298.679730] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [298.679947] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2 <7> [298.680261] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21 <7> [298.680415] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [298.680577] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000 <7> [298.680931] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [298.680902] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE <7> [298.680944] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [298.681227] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7> [298.681323] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [298.681553] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7> [298.681882] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39 <7> [298.682197] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7> [298.682521] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7> [298.682847] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7> [298.683174] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7> [298.683501] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7> [298.683865] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7> [298.684193] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7> [298.684512] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7> [298.684858] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7> [298.685176] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no <7> [298.685491] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no <7> [298.685816] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7> [298.686164] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7> [298.686524] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [298.686488] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7> [298.686539] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [298.686812] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no <7> [298.687014] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [298.687030] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [298.687042] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [298.687133] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no <7> [298.687449] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7> [298.687767] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7> [298.688106] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes <7> [298.688405] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7> [298.688611] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no <7> [298.688874] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7> [298.689196] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7> [298.689529] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no <7> [298.689862] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no <7> [298.690175] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no <7> [298.690484] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7> [298.690797] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no <7> [298.691121] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7> [298.691557] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [298.691578] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [298.691439] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7> [298.691591] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [298.691747] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7> [298.692031] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7> [298.692338] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no <7> [298.692297] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [298.692660] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes <7> [298.692700] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [298.693005] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7> [298.693328] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7> [298.693327] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [298.693766] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [298.693656] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7> [298.693777] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [298.693979] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7> [298.694204] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [298.694290] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7> [298.694591] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403 <7> [298.694787] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001 <7> [298.695071] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3 <7> [298.695318] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007 <7> [298.695629] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000 <7> [298.695967] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000 <7> [298.696281] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24 <7> [298.696593] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8 <7> [298.696913] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7> [298.697222] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7> [298.697522] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes <7> [298.697703] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <6> [298.697788] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [298.697791] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [298.697793] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [298.697716] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [298.698178] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [298.698193] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? yes <7> [298.698203] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no <7> [298.698211] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no <7> [298.698219] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no <7> [298.698227] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no <7> [298.698660] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [298.698711] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] found preferred mode: 3200x1800 <7> [298.698721] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [298.698802] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:58:pipe A] desired mode 3200x1800 set (0,0) <7> [298.701310] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:110:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [298.701764] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:109:DDI A/PHY A][CRTC:58:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [298.702150] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000 <7> [298.702535] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [298.702922] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:109:DDI A/PHY A] [CRTC:58:pipe A] <7> [298.703269] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [298.703632] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [298.704018] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [298.704400] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [298.704782] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [298.705192] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [298.705568] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [298.705946] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [298.706308] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [298.706672] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [298.707052] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [298.707418] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [298.707776] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [298.708156] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [298.708534] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [298.708918] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [298.709295] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [298.709671] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [298.710043] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [298.710401] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [298.710757] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [298.711135] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [298.711511] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [298.711896] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [298.712256] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [298.712620] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [298.712999] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [298.713364] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [298.713725] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [298.714111] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [298.714490] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [298.714878] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [298.715257] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [298.715635] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [298.716024] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [298.716399] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dpll_hw_state <7> [298.716773] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [298.717136] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 <7> [298.717496] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [298.717861] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [298.718226] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [298.718592] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [298.718970] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [298.719327] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [298.719675] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset <6> [298.722450] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7> [298.723644] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [298.724073] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [298.724430] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [298.724779] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [298.725172] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [298.725529] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [298.725918] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [298.726549] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [298.727060] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [298.727429] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [298.727782] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [298.728213] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [298.728572] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:58:pipe A] allocated DPLL 0 <7> [298.728998] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:58:pipe A] reserving DPLL 0 <7> [298.729363] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: yes [modeset] <7> [298.729723] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [298.730122] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [298.730461] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [298.730812] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [298.731218] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [298.731573] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [298.731963] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [298.732325] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [298.732687] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [298.733082] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [298.733441] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [298.733802] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [298.734195] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [298.734556] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [298.734945] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [298.735304] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [298.735648] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [298.736034] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [298.736387] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [298.736724] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [298.737114] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [298.737475] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [298.737875] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [298.738233] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [298.738597] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [298.738993] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [298.739355] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [298.739718] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [298.740110] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [298.740455] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [298.740810] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [298.741193] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [298.741549] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [298.741978] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [298.742338] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [298.742699] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [298.743092] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [298.743455] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [298.743813] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [298.744189] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [298.744543] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [298.744897] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [298.745246] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [298.745601] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:111] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [298.745975] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [298.746335] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [298.746695] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [298.747101] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no <7> [298.748992] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [298.750419] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A] <7> [298.750793] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B] <7> [298.751192] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A] <7> [298.751543] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B] <7> [298.751925] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C] <7> [298.752272] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C] <7> [298.752625] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A] <7> [298.752996] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B] <7> [298.753354] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C] <7> [298.754760] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:58:pipe A] <7> [298.755187] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [298.756037] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power on <7> [298.756536] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [298.756964] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [298.766868] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [298.767262] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power on <7> [298.767640] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000000b <7> [298.968367] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [298.969512] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [298.971236] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [298.975978] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [298.976966] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [298.979440] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [298.980424] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [298.981434] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [298.985172] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Clock recovery OK <7> [298.986416] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [298.987544] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [298.991542] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [298.992905] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [298.994364] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [298.997771] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [298.999034] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [299.001613] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [299.004721] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [299.006066] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [299.007721] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 37 <7> [299.012230] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 326 us, max time under evasion is 250 us <7> [299.021407] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [299.027283] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1] <7> [299.029092] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [299.031591] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <6> [299.038599] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7> [299.039442] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [299.039518] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [299.039544] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [299.039815] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [299.039928] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [299.040248] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [299.044132] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [299.044718] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [299.046019] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [299.047417] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [299.048998] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [299.049042] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [299.049073] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [299.049207] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no <7> [299.050547] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [299.051872] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [299.054292] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [299.059309] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes: <7> [299.059362] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [299.059405] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [299.059449] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [299.059487] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [299.065286] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [299.065342] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [299.065384] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [299.068024] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [299.069773] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [299.071259] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [299.072703] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [299.072752] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [299.074021] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [299.079817] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [299.079894] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [299.081355] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [299.081407] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [299.081448] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [299.087198] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [299.087255] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [299.087295] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [299.089136] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [299.090297] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [299.094959] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [299.095772] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [299.095794] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [299.096711] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [299.101409] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [299.101433] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [299.102190] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [299.102216] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? yes <7> [299.102233] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no <7> [299.102249] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no <7> [299.102264] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no <7> [299.102278] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no <7> [299.102376] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [299.102426] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] found preferred mode: 3200x1800 <7> [299.102442] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [299.103330] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:58:pipe A] desired mode 3200x1800 set (0,0) <7> [299.103672] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [299.103899] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [299.103921] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [299.104663] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [299.105134] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [299.105636] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [299.106216] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [299.106235] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [299.106249] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [299.106316] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no <7> [299.106728] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [299.107314] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [299.111451] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes: <7> [299.111467] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [299.111478] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [299.111622] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [299.111633] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [299.116202] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [299.116371] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [299.116387] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [299.117560] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [299.118004] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [299.118590] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [299.119076] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [299.119089] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [299.119505] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [299.123160] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [299.123176] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [299.123649] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [299.123806] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [299.123820] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [299.126633] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [299.127248] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [299.127669] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [299.128065] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [299.128442] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [299.128946] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [299.128828] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [299.129092] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [299.129104] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [299.129227] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [299.129603] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [299.129740] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [299.129980] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [299.130089] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [299.130967] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [299.131359] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [299.131369] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [299.131662] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [299.136750] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [299.136766] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [299.137242] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [299.146888] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [299.146906] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [299.151364] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <6> [299.151557] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input40 <7> [299.152091] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [299.152101] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [299.152654] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [299.153033] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [299.153572] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [299.155959] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [299.155972] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [299.156354] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [299.161508] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [299.161524] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [299.161988] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [299.162951] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [299.162965] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [299.167491] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <6> [299.172235] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input41 <7> [299.173374] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [299.173394] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [299.177914] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [299.178290] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [299.178861] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <6> [299.179171] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input42 <7> [299.179827] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [299.179864] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [299.183738] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [299.187457] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [299.187470] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [299.187793] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [299.190880] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [299.190896] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [299.191345] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [299.191714] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [299.192086] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [299.192477] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [299.192489] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [299.192498] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [299.192538] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no <7> [299.192919] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [299.193268] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [299.196388] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes: <7> [299.196401] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [299.196413] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [299.196461] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [299.196472] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [299.204599] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [299.204657] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [299.204668] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [299.207125] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [299.207476] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [299.208006] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [299.208409] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [299.208420] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [299.219880] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [299.227631] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [299.227648] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [299.228224] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [299.228277] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [299.228289] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [299.232717] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [299.232760] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [299.232769] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [299.233494] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [299.233740] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [299.234187] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [299.234443] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [299.234452] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [299.234667] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [299.237726] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [299.237737] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [299.238406] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [299.239226] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:143] <7> [300.228114] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [300.279366] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:58:pipe A] <7> [300.279727] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [300.280415] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [300.281065] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [300.281610] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [300.282405] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [300.283042] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [300.283980] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [300.285153] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [300.286423] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [300.287607] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [300.288779] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [300.289935] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [300.291020] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [300.291912] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [300.292749] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [300.294078] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [300.295419] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [300.296748] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [300.298073] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [300.299395] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [300.300594] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [300.301535] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [300.302591] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [300.303499] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [300.304551] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [300.305415] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [300.306502] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [300.307413] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [300.308486] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [300.309745] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [300.310779] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [300.311678] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [300.312600] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [300.313472] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [300.314385] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [300.315273] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [300.316223] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [300.317094] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [300.318015] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [300.319185] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset <7> [300.320198] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0 <7> [300.321255] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [300.322205] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [300.323086] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [300.323986] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [300.324775] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [300.325616] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [300.326563] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [300.327689] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [300.328740] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz <7> [300.329777] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [300.330834] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [300.332161] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [300.333493] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset] <7> [300.334812] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no <7> [300.336121] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [300.337407] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no <7> [300.338804] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [300.344486] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [300.550261] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0 <7> [300.551611] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [300.556927] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off <7> [300.557391] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [300.558049] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time <7> [300.558725] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short <7> [300.559463] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [300.610781] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [300.610819] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [300.612213] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long <7> [300.612804] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [300.613469] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [300.615380] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [300.615778] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A] <7> [300.616788] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [300.617619] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [300.619076] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [300.622043] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A] <7> [300.623349] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B] <7> [300.624288] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A] <7> [300.625547] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B] <7> [300.626904] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C] <7> [300.628241] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C] <7> [300.629580] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A] <7> [300.630896] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B] <7> [300.632097] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C] <7> [300.633200] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1] <7> [300.635090] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [300.637579] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:83:pipe B] <7> [300.638660] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:108:pipe C] <7> [300.742475] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [300.744067] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [300.745031] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [300.746527] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [300.749437] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [300.771017] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [300.854856] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:110:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [300.856051] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:109:DDI A/PHY A][CRTC:58:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [300.857034] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000 <7> [300.858389] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [300.860151] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:109:DDI A/PHY A] [CRTC:58:pipe A] <7> [300.861530] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [300.862766] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [300.864048] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [300.865380] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [300.866575] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [300.868031] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [300.869049] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [300.870328] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [300.871375] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [300.872556] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [300.873635] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [300.875088] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [300.876194] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [300.877443] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [300.878466] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [300.879650] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [300.880662] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [300.881990] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [300.882831] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [300.883902] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [300.885363] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [300.886478] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [300.887707] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [300.888672] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [300.889815] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [300.890728] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [300.891828] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [300.892945] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [300.894381] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [300.895483] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [300.896696] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [300.897642] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [300.898782] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [300.899699] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [300.900743] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [300.901766] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [300.903001] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [300.904463] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [300.905660] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [300.906680] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset <7> [300.907840] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [300.908718] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [300.909601] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [300.910449] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [300.911373] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [300.912241] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [300.913203] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [300.914570] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [300.915707] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [300.916651] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [300.917673] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [300.918538] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [300.919599] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:58:pipe A] allocated DPLL 0 <7> [300.920505] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:58:pipe A] reserving DPLL 0 <7> [300.921571] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: yes [modeset] <7> [300.922505] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [300.923813] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [300.924933] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [300.926029] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [300.926846] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [300.927727] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [300.928764] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [300.929685] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [300.930732] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [300.931610] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [300.932925] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [300.933829] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [300.934744] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [300.935788] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [300.936660] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [300.937714] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [300.938579] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [300.939624] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [300.940594] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [300.941717] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [300.942654] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [300.943714] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [300.944609] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [300.945638] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [300.946541] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [300.947583] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [300.948494] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [300.949746] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [300.950843] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [300.951900] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [300.952815] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [300.953726] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [300.954664] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [300.955537] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [300.956441] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [300.957347] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [300.958304] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [300.959172] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [300.960148] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [300.961319] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [300.962284] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [300.962825] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [300.963453] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [300.964151] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:111] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [300.964699] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [300.965277] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [300.965980] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [300.966519] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no <7> [300.979001] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [300.988345] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [300.988677] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [300.989302] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [300.989991] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [300.990655] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [300.991703] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A] <7> [300.992014] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B] <7> [300.992284] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A] <7> [300.992553] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B] <7> [300.992821] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C] <7> [300.993176] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C] <7> [300.993487] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A] <7> [300.993772] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B] <7> [300.994067] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C] <7> [300.994561] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:58:pipe A] <7> [300.994850] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [300.995355] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power on <7> [300.995744] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (117 ms remaining) <7> [301.118100] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [301.169047] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [301.170218] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power on <7> [301.171242] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003 <7> [301.220156] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [301.221265] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long <7> [301.222280] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [301.223434] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [301.374662] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [301.376162] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [301.378104] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [301.381079] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on <7> [301.382657] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b <7> [301.388256] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [301.389039] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [301.392432] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [301.394260] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [301.395838] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [301.399850] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Clock recovery OK <7> [301.400945] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [301.401824] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [301.405084] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [301.406055] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [301.407046] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [301.410856] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [301.411999] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [301.413006] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [301.416577] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [301.417631] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [301.419606] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [301.422570] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [301.423548] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [301.425230] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 37 <7> [301.429155] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 380 us, max time under evasion is 250 us <7> [301.438413] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [301.443446] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1] <7> [301.444611] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [301.449300] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [301.450716] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [301.457798] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [301.459528] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [301.460374] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [301.461631] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [301.462569] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [301.462597] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [301.463402] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [301.468616] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [301.468658] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [301.470991] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [301.476665] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [301.478464] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [301.479817] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [301.481794] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [301.483166] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [301.483202] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [301.485064] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [301.490897] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [301.490937] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [301.599453] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [301.600273] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [301.613065] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [301.638579] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [301.638912] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [301.651048] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [301.703768] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [301.704604] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [301.712743] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [301.713133] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [301.713438] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [301.713726] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [301.714049] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [301.714430] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [301.714727] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [301.715041] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [301.715403] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [301.716315] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [301.803623] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [301.804813] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [301.805370] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [301.806120] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <6> [301.811597] Console: switching to colour dummy device 80x25 <7> [301.815847] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:111] is removed <7> [301.816166] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [301.817317] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [301.818773] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [301.819867] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [301.820929] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [301.822838] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [301.838711] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [301.843292] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [301.844246] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [301.845171] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [301.846072] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [301.846971] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [301.847842] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [301.848738] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [301.849656] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [301.850698] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [301.851430] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [301.852474] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [301.853553] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [301.854617] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [301.855846] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [301.857198] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [301.858229] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [301.859075] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [301.859733] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [301.860719] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [301.861798] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [301.863021] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [301.864111] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [301.865189] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [301.865962] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [301.866615] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [301.867657] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [301.868731] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [301.869807] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [301.870901] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [301.871938] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [301.872600] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [301.873495] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [301.874560] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [301.875618] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [301.876678] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [301.877753] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [301.878676] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [301.879424] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [301.880449] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [301.881530] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset <7> [301.882590] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0 <7> [301.884068] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [301.885145] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [301.886025] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [301.887125] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [301.888192] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [301.889239] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [301.890306] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset] <7> [301.891297] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no <7> [301.892019] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [301.893049] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no <7> [301.895392] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [302.102367] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0 <7> [302.104659] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [302.124593] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off <7> [302.125116] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [302.125638] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time <7> [302.126182] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short <7> [302.126640] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [302.178166] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [302.179119] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [302.179279] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long <7> [302.180294] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [302.181447] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A] <7> [302.181794] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [302.183452] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [302.185239] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [302.187090] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [302.190962] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A] <7> [302.192972] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B] <7> [302.194578] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A] <7> [302.196361] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B] <7> [302.198094] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C] <7> [302.199796] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C] <7> [302.201313] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A] <7> [302.202846] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B] <7> [302.204384] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C] <7> [302.205979] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1] <7> [302.209159] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [302.287717] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [302.326081] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:110:eDP-1] removing connector from sysfs <7> [302.365869] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:118:DP-1] removing connector from sysfs <7> [302.374324] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:127:HDMI-A-1] removing connector from sysfs <7> [302.391849] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:133:DP-2] removing connector from sysfs <7> [302.401991] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:139:HDMI-A-2] removing connector from sysfs <7> [302.430384] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (250 ms remaining) <7> [302.686534] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [302.779224] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [303.384234] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS <6> [303.385862] [IGT] i915_pm_rpm: exiting, ret=0

<6> [288.124175] Console: switching to colour dummy device 80x25

<7> [288.128767] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [288.129445] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [288.129458] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [288.130091] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [288.130443] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [288.130980] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [288.131471] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [288.131483] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [288.131491] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [288.131528] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no

<7> [288.131904] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [288.132263] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [288.134442] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes:

<7> [288.134455] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [288.134467] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [288.134668] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [288.134679] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [288.139181] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [288.139327] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [288.139338] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [288.140316] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [288.140715] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [288.141275] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [288.141708] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [288.141718] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [288.142071] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [288.145331] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [288.145342] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [288.145771] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [288.145902] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [288.145913] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [288.150389] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [288.150480] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [288.150489] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [288.151070] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [288.151425] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [288.151990] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [288.152361] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [288.152371] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [288.152704] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [288.155748] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [288.155758] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [288.156042] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [288.162781] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [288.162793] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [288.167123] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [288.167812] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [288.167822] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [288.168334] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [288.168554] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [288.169033] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [288.169293] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [288.169301] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [288.169512] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [288.172553] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [288.172563] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [288.172888] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [288.173587] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [288.173597] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [288.178005] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [288.178964] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [288.178977] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [288.179675] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [288.179983] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [288.180530] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [288.180965] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [288.180976] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [288.181347] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [288.185161] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [288.185173] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [288.185591] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [288.186389] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [288.186401] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [288.186860] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [288.187225] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [288.187591] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [288.188015] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [288.188027] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [288.188035] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [288.188072] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no

<7> [288.188449] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [288.188838] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [288.190178] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes:

<7> [288.190208] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [288.190220] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [288.190264] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [288.190274] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [288.194795] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [288.194838] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [288.194849] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [288.195498] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [288.195868] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [288.196431] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [288.196842] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [288.196853] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [288.197185] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [288.200378] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [288.200388] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [288.200816] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [288.200859] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [288.200869] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [288.205335] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [288.205375] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [288.205384] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [288.206039] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [288.206404] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [288.206968] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [288.207350] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [288.207359] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [288.207891] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [288.211128] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [288.211139] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [288.211531] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [288.212287] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:144]

<7> [288.344536] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [289.266471] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:58:pipe A]

<7> [289.267245] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [289.268529] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [289.269250] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [289.269565] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [289.269874] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [289.270178] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [289.270438] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [289.270716] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [289.271019] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [289.271279] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [289.271539] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [289.271814] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [289.272143] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [289.272394] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [289.272659] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [289.272963] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [289.273211] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [289.273461] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [289.273744] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [289.274046] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [289.274303] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [289.274612] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [289.274891] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [289.275181] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [289.275486] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [289.275773] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [289.276070] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [289.276370] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [289.276616] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [289.276890] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [289.277148] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [289.277397] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [289.277664] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [289.277906] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [289.278147] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [289.278390] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [289.278631] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [289.278893] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [289.279133] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [289.279375] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset

<7> [289.279616] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0

<7> [289.279935] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [289.280213] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [289.280493] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [289.280746] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [289.281000] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [289.281236] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [289.281469] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [289.281798] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [289.282118] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz

<7> [289.282538] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [289.282941] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [289.283314] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [289.283703] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset]

<7> [289.284075] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no

<7> [289.284431] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [289.284713] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no

<7> [289.285137] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [289.286883] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [289.494121] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0

<7> [289.496292] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [289.514443] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off

<7> [289.514947] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [289.515813] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [289.516428] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short

<7> [289.517283] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [289.569041] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [289.569592] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [289.570390] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long

<7> [289.571718] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [289.571781] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [289.574897] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [289.575279] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A]

<7> [289.576269] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [289.577310] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [289.578616] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [289.581473] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A]

<7> [289.582759] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B]

<7> [289.583983] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A]

<7> [289.584979] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B]

<7> [289.586195] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C]

<7> [289.587213] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C]

<7> [289.588443] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A]

<7> [289.589434] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B]

<7> [289.590704] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C]

<7> [289.591624] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1]

<7> [289.593847] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [289.597590] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:83:pipe B]

<7> [289.598947] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:108:pipe C]

<7> [289.702181] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [289.703967] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [289.705532] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [289.707461] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [289.711295] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [289.729872] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [289.811457] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:110:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [289.812504] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:109:DDI A/PHY A][CRTC:58:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [289.813625] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000

<7> [289.815208] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [289.817295] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:109:DDI A/PHY A] [CRTC:58:pipe A]

<7> [289.818860] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [289.820761] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [289.822381] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [289.824054] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [289.825653] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [289.827372] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [289.828977] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [289.830544] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [289.832112] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [289.833591] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [289.835158] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [289.836598] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [289.838168] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [289.839714] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [289.841277] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [289.842850] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [289.844321] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [289.845865] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [289.847258] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [289.848621] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [289.849992] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [289.851352] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [289.852725] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [289.854087] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [289.855484] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [289.856835] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [289.858193] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [289.859552] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [289.860901] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [289.862253] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [289.863621] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [289.864988] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [289.866349] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [289.867731] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [289.869101] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [289.870458] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [289.871822] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [289.873179] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [289.874540] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [289.875904] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset

<7> [289.877490] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [289.878853] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [289.880180] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [289.881505] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [289.882821] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [289.884150] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [289.885486] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [289.887100] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [289.888610] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [289.889976] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [289.891334] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [289.892729] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [289.894083] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:58:pipe A] allocated DPLL 0

<7> [289.895475] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:58:pipe A] reserving DPLL 0

<7> [289.896869] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: yes [modeset]

<7> [289.898207] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [289.899566] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [289.900594] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [289.901934] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [289.903277] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [289.904619] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [289.905943] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [289.907221] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [289.908199] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [289.909460] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [289.910798] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [289.912140] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [289.913465] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [289.914788] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [289.915823] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [289.916636] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [289.917846] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [289.918821] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [289.919712] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [289.920570] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [289.921452] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [289.922216] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [289.922869] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [289.923533] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [289.924134] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [289.924850] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [289.925397] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [289.926011] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [289.926706] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [289.927244] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [289.927790] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [289.928386] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [289.929065] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [289.929736] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [289.930379] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [289.931033] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [289.931688] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [289.932280] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [289.932755] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [289.933262] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [289.933725] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [289.934234] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [289.934638] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [289.935082] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:111] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [289.935585] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [289.936024] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [289.936438] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [289.936872] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no

<7> [289.948761] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [289.956888] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [289.957137] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [289.957556] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [289.958193] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [289.958900] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [289.959596] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A]

<7> [289.959994] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B]

<7> [289.960339] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A]

<7> [289.960586] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B]

<7> [289.960870] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C]

<7> [289.961158] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C]

<7> [289.961390] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A]

<7> [289.961620] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B]

<7> [289.961883] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C]

<7> [289.962354] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:58:pipe A]

<7> [289.962603] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [289.963111] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power on

<7> [289.963456] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (108 ms remaining)

<7> [290.078117] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [290.087922] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [290.088384] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power on

<7> [290.088911] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003

<7> [290.138196] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [290.139304] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long

<7> [290.140370] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [290.141371] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [290.298552] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [290.299880] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [290.301555] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [290.304094] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on

<7> [290.305204] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b

<7> [290.311490] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [290.312771] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [290.315322] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [290.316428] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [290.317727] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [290.321348] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Clock recovery OK

<7> [290.322489] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [290.323456] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [290.326583] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [290.327561] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [290.328575] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [290.332034] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [290.333071] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [290.335011] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [290.337475] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [290.338491] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [290.340187] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 37

<7> [290.353366] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [290.358947] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1]

<7> [290.360197] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [290.365657] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [290.367440] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [290.371548] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<6> [290.373077] [IGT] i915_pm_rpm: starting subtest module-reload

<7> [290.373524] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [290.374879] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [290.376318] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [290.377757] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [290.377795] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [290.379078] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [290.384732] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [290.384773] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [290.386236] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [290.391931] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [290.394012] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [290.395352] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [290.397053] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [290.398444] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [290.398482] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [290.400030] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [290.405811] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [290.405851] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [290.525263] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [290.525953] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [290.539569] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [290.565425] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [290.565898] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [290.578746] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [290.611504] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [290.614071] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [290.621609] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [290.622163] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [290.622626] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [290.626621] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [290.627246] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [290.628094] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [290.628777] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [290.629260] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [290.629772] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [290.631076] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [290.738490] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [290.739736] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [290.740553] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [290.741395] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [290.745042] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:111] is removed

<7> [290.745253] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [290.746154] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [290.747331] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [290.748410] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [290.749433] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [290.751020] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [290.770361] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [290.774809] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [290.775652] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [290.776492] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [290.777576] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [290.778651] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [290.779729] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [290.781146] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [290.782243] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [290.783316] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [290.784473] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [290.785541] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [290.786630] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [290.787967] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [290.789093] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [290.790188] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [290.791290] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [290.792398] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [290.793500] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [290.794362] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [290.795295] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [290.796360] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [290.797433] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [290.798492] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [290.799560] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [290.800441] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [290.801287] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [290.802356] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [290.803428] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [290.804497] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [290.805574] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [290.806522] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [290.807243] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [290.808192] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [290.809281] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [290.810352] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [290.811418] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [290.812490] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [290.813490] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [290.814367] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [290.815438] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset

<7> [290.816510] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0

<7> [290.817762] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [290.818957] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [290.820252] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [290.821050] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [290.821737] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [290.822789] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [290.823863] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset]

<7> [290.824922] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no

<7> [290.825992] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [290.827034] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no

<7> [290.829065] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [291.038178] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0

<7> [291.040535] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [291.056827] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off

<7> [291.057992] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [291.059125] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short

<7> [291.060331] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [291.062083] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [291.113025] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [291.113798] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [291.114320] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long

<7> [291.115500] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [291.115823] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [291.117611] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [291.117808] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A]

<7> [291.122066] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [291.124030] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [291.128169] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A]

<7> [291.130228] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B]

<7> [291.131911] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A]

<7> [291.133587] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B]

<7> [291.135410] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C]

<7> [291.137186] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C]

<7> [291.138864] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A]

<7> [291.140644] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B]

<7> [291.142471] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C]

<7> [291.144269] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1]

<7> [291.147824] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [291.219778] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [291.268898] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:110:eDP-1] removing connector from sysfs

<7> [291.290927] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:118:DP-1] removing connector from sysfs

<7> [291.298597] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:127:HDMI-A-1] removing connector from sysfs

<7> [291.308520] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:133:DP-2] removing connector from sysfs

<7> [291.316111] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:139:HDMI-A-2] removing connector from sysfs

<7> [291.350041] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (265 ms remaining)

<7> [291.622454] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [291.695273] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<5> [293.209897] Setting dangerous option force_probe - tainting kernel

<6> [293.222364] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0

<7> [293.224151] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K

<7> [293.224571] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [293.224866] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH

<7> [293.225276] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [293.225757] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [293.226351] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [293.226719] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [293.228034] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [293.228395] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [293.228764] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [293.229094] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [293.229107] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [293.230018] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [293.230076] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [293.230489] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [293.230898] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7716 MiB [mem 0x00000000-0x1e24e0fff], io: n/a

<7> [293.231232] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a

<7> [293.232142] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018

<7> [293.232642] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [293.233063] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [293.233466] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [293.233873] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [293.242794] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [293.243071] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [293.243317] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [293.243563] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [293.243848] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [293.244250] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [293.244649] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no

<7> [293.245059] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [293.245459] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [293.245844] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no

<7> [293.246242] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes

<7> [293.246645] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no

<7> [293.247062] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3

<7> [293.247459] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [293.247866] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0

<7> [293.248264] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0

<7> [293.249436] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [293.249871] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203

<7> [293.250285] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [293.250698] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [293.251121] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [293.251527] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [293.251952] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 850)

<7> [293.252360] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [293.252781] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [293.253194] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [293.253603] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [293.254020] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136)

<7> [293.254418] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [293.254831] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [293.255228] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [293.255637] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [293.256051] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [293.256460] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [293.256865] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [293.257261] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [293.257658] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [293.258065] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [293.258459] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [293.258864] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [293.259273] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [293.259699] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [293.260218] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [293.260651] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [293.261072] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [293.261471] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [293.261872] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [293.262268] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [293.262803] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [293.263206] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [293.263608] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [293.264034] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [293.264524] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [293.264942] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [293.265350] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [293.265772] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [293.267018] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<7> [293.268803] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [293.269211] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [293.269256] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [293.269669] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [293.269913] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [293.270092] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [293.270406] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<6> [293.270924] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [293.270812] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided

<7> [293.271203] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec)

<7> [293.271583] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec)

<7> [293.271957] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec)

<7> [293.272263] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec)

<7> [293.272512] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec)

<7> [293.272810] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec)

<7> [293.273187] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec)

<7> [293.273564] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec)

<7> [293.273969] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec)

<7> [293.274346] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec)

<7> [293.274623] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec)

<7> [293.274916] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec)

<7> [293.275195] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec)

<7> [293.275583] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec)

<7> [293.276003] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec)

<7> [293.281146] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available.

<7> [293.285167] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [293.285655] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:109:DDI A/PHY A] Using AUX CH A (VBT)

<7> [293.286148] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:109:DDI A/PHY A]

<7> [293.291693] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [293.292143] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [293.292544] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [293.292955] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [293.293366] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [293.293774] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [293.294168] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP

<7> [293.294566] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [293.294972] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0

<7> [293.295390] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0

<7> [293.296392] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:109:DDI A/PHY A] initial power sequencer: PPS 0

<7> [293.296833] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [293.297222] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [293.297609] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [293.298025] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [293.298416] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [293.298878] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [293.299770] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on

<7> [293.300175] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [293.300589] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [293.310914] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [293.311267] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [293.311528] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [293.521804] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [293.522652] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [293.524627] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00

<7> [293.529728] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [293.548233] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [293.548290] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [293.548330] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [293.548984] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [293.550875] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [293.552475] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:110:eDP-1] DRRS type: static

<7> [293.554462] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:110:eDP-1] Using native PCH PWM for backlight control

<7> [293.555965] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:110:eDP-1] backlight initialized, disabled, brightness 0/937

<7> [293.558235] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [293.559631] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [293.560930] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [293.562412] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [293.564019] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [293.565553] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [293.568255] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:117:DDI B/PHY B] Using AUX CH B (VBT)

<7> [293.569857] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:117:DDI B/PHY B]

<7> [293.574181] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [293.576029] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:117:DDI B/PHY B]

<7> [293.577338] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:117:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [293.580512] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:132:DDI C/PHY C] Using AUX CH C (VBT)

<7> [293.581977] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:132:DDI C/PHY C]

<7> [293.585373] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [293.587197] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:132:DDI C/PHY C]

<7> [293.588512] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:132:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [293.591997] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled

<6> [293.593392] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem

<7> [293.594488] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] hw state readout: disabled

<7> [293.596505] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] hw state readout: disabled

<7> [293.598834] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] hw state readout: disabled

<7> [293.600950] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] hw state readout: disabled, pipe A

<7> [293.603166] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A

<7> [293.605436] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] hw state readout: disabled, pipe A

<7> [293.607605] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] hw state readout: disabled, pipe B

<7> [293.609255] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] hw state readout: disabled, pipe B

<7> [293.611476] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] hw state readout: disabled, pipe B

<7> [293.613703] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] hw state readout: disabled, pipe C

<7> [293.616026] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] hw state readout: disabled, pipe C

<7> [293.618104] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] hw state readout: disabled, pipe C

<7> [293.619855] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [293.622101] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [293.624190] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST A] hw state readout: disabled, pipe A

<7> [293.626213] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST B] hw state readout: disabled, pipe B

<7> [293.628108] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST C] hw state readout: disabled, pipe C

<7> [293.630438] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:132:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [293.632390] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST A] hw state readout: disabled, pipe A

<7> [293.633587] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST B] hw state readout: disabled, pipe B

<7> [293.634807] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST C] hw state readout: disabled, pipe C

<7> [293.635927] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [293.636958] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [293.638327] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [293.639664] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [293.641281] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:110:eDP-1] hw state readout: disabled

<7> [293.642224] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:118:DP-1] hw state readout: disabled

<7> [293.642998] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:127:HDMI-A-1] hw state readout: disabled

<7> [293.643697] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:133:DP-2] hw state readout: disabled

<7> [293.644482] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:139:HDMI-A-2] hw state readout: disabled

<7> [293.645112] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] min_cdclk 0 kHz

<7> [293.645663] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] min_cdclk 0 kHz

<7> [293.646284] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] min_cdclk 0 kHz

<7> [293.646996] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] min_cdclk 0 kHz

<7> [293.647680] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] min_cdclk 0 kHz

<7> [293.648289] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] min_cdclk 0 kHz

<7> [293.649009] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] min_cdclk 0 kHz

<7> [293.649554] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] min_cdclk 0 kHz

<7> [293.650142] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] min_cdclk 0 kHz

<7> [293.650672] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] min_cdclk 0 kHz

<7> [293.651127] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] min_cdclk 0 kHz

<7> [293.651731] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] min_cdclk 0 kHz

<7> [293.652229] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:58:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [293.652711] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:83:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [293.653172] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:108:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [293.654052] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [setup_hw_state]

<7> [293.654488] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [setup_hw_state]

<7> [293.654944] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [setup_hw_state]

<7> [293.655449] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [293.656153] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [293.656540] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [293.656987] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [293.657485] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global

<7> [293.660591] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [293.660966] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [293.661299] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0

<7> [293.683769] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [293.684021] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [293.684219] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [293.684415] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [293.684613] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 0: start 0x8

<7> [293.684890] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 1: start 0x108

<7> [293.685209] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 2: start 0x208

<7> [293.685471] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 3: start 0x308

<7> [293.685748] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 4: start 0x3c8

<7> [293.686055] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 0: start 0x8

<7> [293.686309] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 1: start 0x108

<7> [293.686563] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 2: start 0x208

<7> [293.686902] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 3: start 0x308

<7> [293.687192] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 4: start 0x3c8

<7> [293.687465] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 0: start 0x8

<7> [293.687720] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 1: start 0x108

<7> [293.688103] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 2: start 0x208

<7> [293.688409] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 3: start 0x308

<7> [293.688664] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 4: start 0x3c8

<7> [293.689185] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [fastset]

<7> [293.689446] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [fastset]

<7> [293.689700] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [fastset]

<7> [293.690240] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [293.690904] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:83:pipe B]

<7> [293.691338] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:108:pipe C]

<7> [293.691770] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [293.696567] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:110:eDP-1] adding connector to sysfs

<7> [293.698053] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:110:eDP-1] backlight device intel_backlight registered

<7> [293.698533] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:110:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [293.699405] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [293.702109] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:110:eDP-1] generating connector hotplug event

<7> [293.702244] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:118:DP-1] adding connector to sysfs

<7> [293.705044] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [293.706915] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:118:DP-1] generating connector hotplug event

<7> [293.707023] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:127:HDMI-A-1] adding connector to sysfs

<7> [293.709667] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:127:HDMI-A-1] generating connector hotplug event

<7> [293.710272] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:133:DP-2] adding connector to sysfs

<7> [293.713132] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [293.716957] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:133:DP-2] generating connector hotplug event

<7> [293.717070] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:139:HDMI-A-2] adding connector to sysfs

<7> [293.718066] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:139:HDMI-A-2] generating connector hotplug event

<6> [293.718191] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0

<7> [293.724076] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [293.754522] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [293.766249] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input35

<7> [293.770148] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [293.775629] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:58:pipe A] not active, skipping

<7> [293.776113] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:83:pipe B] not active, skipping

<7> [293.776522] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:108:pipe C] not active, skipping

<7> [293.776945] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config

<7> [293.777829] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [293.778238] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:118:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [293.778647] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [293.779068] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:127:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [293.779261] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [293.780406] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [293.781788] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [293.782233] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:133:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [293.782646] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [293.783066] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:139:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [293.784159] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [293.785196] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [293.785213] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [293.785642] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] status updated from unknown to disconnected

<7> [293.785664] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] disconnected

<7> [293.785686] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [293.786835] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:110:eDP-1] EDID changed, epoch counter 2

<7> [293.786868] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [293.786881] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [293.787309] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [293.787324] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [293.787334] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [293.787725] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [293.787767] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [293.789020] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [293.789440] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [293.789457] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [293.789468] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [293.789884] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [293.790282] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [293.790294] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? no

<7> [293.790323] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no

<7> [293.790332] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no

<7> [293.790340] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no

<7> [293.790348] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no

<7> [293.790407] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [293.790427] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [293.790534] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [293.790549] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [293.796188] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9

<7> [293.796659] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0

<7> [293.796987] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no

<7> [293.797327] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no

<7> [293.797601] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no

<7> [293.797973] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes

<7> [293.798355] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes

<7> [293.798651] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no

<7> [293.799085] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes

<7> [293.799503] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no

<7> [293.799944] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes

<7> [293.800349] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no

<7> [293.800801] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes

<7> [293.801198] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no

<7> [293.801601] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes

<7> [293.801928] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes

<7> [293.802248] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no

<7> [293.802520] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no

<7> [293.802823] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes

<7> [293.803225] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes

<7> [293.803516] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no

<7> [293.803850] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz

<7> [293.804505] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [293.804643] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [293.804658] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [293.805082] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] disconnected

<7> [293.805098] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [293.805109] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [293.805503] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [293.805516] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [293.805526] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [293.805924] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [293.805937] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [293.805947] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [293.806328] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [293.806342] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [293.806353] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [293.806628] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [293.806636] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [293.806644] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? no

<7> [293.806652] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no

<7> [293.806660] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no

<7> [293.806668] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no

<7> [293.806675] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no

<7> [293.806713] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [293.806727] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [293.806833] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [293.806863] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [293.807031] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [293.807761] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [293.807810] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device

<7> [293.808492] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [293.808517] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [293.808953] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] disconnected

<7> [293.808977] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [293.808828] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [293.808988] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [293.809376] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [293.809389] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [293.809265] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [293.809400] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [293.809812] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [293.809683] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [293.810776] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [293.811331] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [293.811764] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [293.811782] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [293.812020] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9

<7> [293.812181] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [293.812195] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [293.812206] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [293.812342] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9

<7> [293.812599] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [293.812610] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [293.812628] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? no

<7> [293.812636] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no

<7> [293.812643] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no

<7> [293.812651] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no

<7> [293.812664] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no

<7> [293.812662] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9

<7> [293.812961] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [293.813001] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [293.813111] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [293.813141] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [293.813225] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [293.813093] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0

<7> [293.813426] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0

<7> [293.813766] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2

<7> [293.814091] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21

<7> [293.814418] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000

<7> [293.814751] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE

<7> [293.815063] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48

<7> [293.815391] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2

<7> [293.815670] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39

<7> [293.815978] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no

<7> [293.816208] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no

<7> [293.816408] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no

<7> [293.816723] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes

<7> [293.817080] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no

<7> [293.817404] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no

<7> [293.817730] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes

<7> [293.818059] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes

<7> [293.818378] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no

<7> [293.818686] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no

<7> [293.818935] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no

<7> [293.819159] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes

<7> [293.819409] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no

<7> [293.819731] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no

<7> [293.820086] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no

<7> [293.820411] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no

<7> [293.820736] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no

<7> [293.821063] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no

<7> [293.821383] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes

<7> [293.821637] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes

<7> [293.821904] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no

<7> [293.822222] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no

<7> [293.822549] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no

<7> [293.822891] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no

<7> [293.823216] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no

<7> [293.823541] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no

<7> [293.823863] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no

<7> [293.824184] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no

<7> [293.824500] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes

<7> [293.824805] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no

<7> [293.825120] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes

<7> [293.825437] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes

<7> [293.825760] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no

<7> [293.826087] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes

<7> [293.826413] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no

<7> [293.826747] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no

<7> [293.827068] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no

<7> [293.827383] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no

<7> [293.827697] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled

<7> [293.827989] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403

<7> [293.828257] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001

<7> [293.828487] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3

<7> [293.828832] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007

<7> [293.829161] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000

<7> [293.829487] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000

<7> [293.829820] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24

<7> [293.830144] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8

<7> [293.830457] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no

<7> [293.830793] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no

<7> [293.831058] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes

<6> [293.831275] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [293.831279] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [293.831283] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [293.845209] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4

<6> [293.849883] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])

<7> [293.850286] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [293.851035] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [293.853181] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [293.884561] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [293.884885] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [293.885117] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [293.885344] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [293.885571] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [293.886422] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [293.887119] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [293.887485] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [293.888021] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<6> [293.908360] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36

<6> [293.923296] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input37

<6> [293.924906] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input38

<7> [295.148625] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [296.105155] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD off

<7> [296.106150] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [296.107084] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [296.107641] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [296.108055] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [296.108208] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [296.108567] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long

<7> [296.108835] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [296.108987] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [296.109890] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [296.110009] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [296.115943] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [296.279772] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [296.304972] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [296.313119] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [296.313499] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [296.313813] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [296.314207] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [296.314598] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [296.315032] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [296.315857] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [296.316513] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [296.317153] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [296.318530] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [296.331961] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [296.332303] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [296.332577] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [296.332888] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [296.333708] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [296.444348] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [296.444764] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [296.445628] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [296.446265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [296.448051] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [296.456349] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [296.456766] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [296.457159] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [296.457527] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [296.458178] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [296.458405] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [296.458625] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [296.458943] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [296.459291] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [296.460239] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [296.461521] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [296.461812] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [296.462114] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [296.462760] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [296.567475] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [296.568434] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [296.570017] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [296.571734] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [296.573605] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [296.574971] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [296.576428] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [296.577831] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [296.579259] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [296.631052] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [296.644599] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:110:eDP-1] removing connector from sysfs

<7> [296.653094] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:118:DP-1] removing connector from sysfs

<7> [296.655778] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:127:HDMI-A-1] removing connector from sysfs

<7> [296.661886] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:133:DP-2] removing connector from sysfs

<7> [296.662642] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:139:HDMI-A-2] removing connector from sysfs

<7> [296.689719] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [296.690144] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [296.699966] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<5> [298.020449] Setting dangerous option force_probe - tainting kernel

<6> [298.033327] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0

<7> [298.035217] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K

<7> [298.035611] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [298.035890] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH

<7> [298.036181] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [298.036497] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [298.036923] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [298.037194] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [298.038245] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [298.038470] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [298.038671] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [298.038896] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [298.038908] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [298.039535] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [298.039573] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [298.039886] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [298.040136] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7716 MiB [mem 0x00000000-0x1e24e0fff], io: n/a

<7> [298.040468] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a

<7> [298.041335] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018

<7> [298.041794] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [298.042175] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [298.042447] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [298.042700] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [298.049876] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [298.050154] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [298.050403] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [298.050650] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [298.050942] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [298.051346] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [298.051746] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no

<7> [298.052159] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [298.052559] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [298.052975] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no

<7> [298.053376] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes

<7> [298.053774] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no

<7> [298.054182] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3

<7> [298.054580] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [298.054986] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0

<7> [298.055385] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0

<7> [298.056521] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [298.056828] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203

<7> [298.057197] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [298.057461] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [298.057726] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [298.058010] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [298.058332] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 850)

<7> [298.058591] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [298.058893] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [298.059237] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [298.059514] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [298.059789] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136)

<7> [298.060092] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [298.060390] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [298.060642] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [298.060932] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [298.061236] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [298.061539] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [298.061810] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [298.062156] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [298.062462] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [298.062715] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [298.062988] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [298.063289] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [298.063550] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [298.063840] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [298.064287] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [298.064591] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [298.064901] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [298.065208] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [298.065460] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [298.065712] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [298.066105] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [298.066383] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [298.066640] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [298.067005] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [298.067383] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [298.067643] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [298.067924] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [298.068232] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [298.069102] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<7> [298.070369] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [298.070643] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [298.070799] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [298.071231] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [298.071610] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [298.071680] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [298.072190] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<6> [298.072428] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [298.072505] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided

<7> [298.072755] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec)

<7> [298.073053] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec)

<7> [298.073315] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec)

<7> [298.073562] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec)

<7> [298.073811] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec)

<7> [298.074112] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec)

<7> [298.074375] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec)

<7> [298.074652] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec)

<7> [298.074918] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec)

<7> [298.075185] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec)

<7> [298.075434] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec)

<7> [298.075683] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec)

<7> [298.075974] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec)

<7> [298.076237] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec)

<7> [298.076488] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec)

<7> [298.081228] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available.

<7> [298.085045] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [298.085524] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:109:DDI A/PHY A] Using AUX CH A (VBT)

<7> [298.086051] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:109:DDI A/PHY A]

<7> [298.094831] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [298.095264] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [298.095662] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [298.096081] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [298.096495] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [298.096906] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [298.097303] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP

<7> [298.097696] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [298.098102] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0

<7> [298.098498] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0

<7> [298.099289] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:109:DDI A/PHY A] initial power sequencer: PPS 0

<7> [298.099728] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [298.100117] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [298.100490] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [298.100871] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [298.101242] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [298.101657] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [298.102520] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on

<7> [298.102944] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [298.103366] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [298.112994] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [298.113321] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [298.113576] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [298.319571] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [298.322439] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [298.325406] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00

<7> [298.331574] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [298.348641] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [298.348687] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [298.348714] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [298.349444] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [298.351476] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [298.353205] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:110:eDP-1] DRRS type: static

<7> [298.355210] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:110:eDP-1] Using native PCH PWM for backlight control

<7> [298.357018] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:110:eDP-1] backlight initialized, disabled, brightness 0/937

<7> [298.359527] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [298.361182] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [298.362880] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [298.364510] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [298.366182] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [298.367920] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [298.371273] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:117:DDI B/PHY B] Using AUX CH B (VBT)

<7> [298.373177] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:117:DDI B/PHY B]

<7> [298.378623] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [298.380533] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:117:DDI B/PHY B]

<7> [298.382213] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:117:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [298.386038] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:132:DDI C/PHY C] Using AUX CH C (VBT)

<7> [298.387982] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:132:DDI C/PHY C]

<7> [298.392267] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [298.394146] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:132:DDI C/PHY C]

<7> [298.395812] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:132:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [298.399999] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled

<6> [298.401772] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem

<7> [298.402993] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] hw state readout: disabled

<7> [298.405655] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] hw state readout: disabled

<7> [298.408337] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] hw state readout: disabled

<7> [298.410287] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] hw state readout: disabled, pipe A

<7> [298.412262] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A

<7> [298.414195] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] hw state readout: disabled, pipe A

<7> [298.416193] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] hw state readout: disabled, pipe B

<7> [298.418129] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] hw state readout: disabled, pipe B

<7> [298.420086] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] hw state readout: disabled, pipe B

<7> [298.422050] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] hw state readout: disabled, pipe C

<7> [298.424065] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] hw state readout: disabled, pipe C

<7> [298.426020] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] hw state readout: disabled, pipe C

<7> [298.429481] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [298.431463] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [298.432959] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST A] hw state readout: disabled, pipe A

<7> [298.434084] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST B] hw state readout: disabled, pipe B

<7> [298.435203] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST C] hw state readout: disabled, pipe C

<7> [298.436437] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:132:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [298.437574] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST A] hw state readout: disabled, pipe A

<7> [298.438689] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST B] hw state readout: disabled, pipe B

<7> [298.439806] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST C] hw state readout: disabled, pipe C

<7> [298.441042] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [298.442078] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [298.442984] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [298.443890] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [298.444993] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:110:eDP-1] hw state readout: disabled

<7> [298.445975] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:118:DP-1] hw state readout: disabled

<7> [298.446969] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:127:HDMI-A-1] hw state readout: disabled

<7> [298.447980] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:133:DP-2] hw state readout: disabled

<7> [298.448964] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:139:HDMI-A-2] hw state readout: disabled

<7> [298.449760] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] min_cdclk 0 kHz

<7> [298.450583] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] min_cdclk 0 kHz

<7> [298.451250] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] min_cdclk 0 kHz

<7> [298.451901] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] min_cdclk 0 kHz

<7> [298.452524] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] min_cdclk 0 kHz

<7> [298.453188] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] min_cdclk 0 kHz

<7> [298.453812] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] min_cdclk 0 kHz

<7> [298.454467] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] min_cdclk 0 kHz

<7> [298.455120] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] min_cdclk 0 kHz

<7> [298.455744] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] min_cdclk 0 kHz

<7> [298.456392] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] min_cdclk 0 kHz

<7> [298.457030] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] min_cdclk 0 kHz

<7> [298.457655] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:58:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [298.458295] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:83:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [298.458927] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:108:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [298.459932] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [setup_hw_state]

<7> [298.460460] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [setup_hw_state]

<7> [298.461006] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [setup_hw_state]

<7> [298.461527] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [298.462168] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [298.462605] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [298.463089] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [298.463615] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global

<7> [298.467303] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [298.467868] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [298.468392] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0

<7> [298.492738] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [298.493043] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [298.493242] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [298.493452] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [298.493657] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 0: start 0x8

<7> [298.493954] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 1: start 0x108

<7> [298.494359] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 2: start 0x208

<7> [298.494769] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 3: start 0x308

<7> [298.495277] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 4: start 0x3c8

<7> [298.495694] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 0: start 0x8

<7> [298.496120] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 1: start 0x108

<7> [298.496548] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 2: start 0x208

<7> [298.497056] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 3: start 0x308

<7> [298.497481] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 4: start 0x3c8

<7> [298.497918] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 0: start 0x8

<7> [298.498341] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 1: start 0x108

<7> [298.498765] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 2: start 0x208

<7> [298.499216] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 3: start 0x308

<7> [298.499643] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 4: start 0x3c8

<7> [298.500431] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [fastset]

<7> [298.500889] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [fastset]

<7> [298.501318] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [fastset]

<7> [298.502065] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [298.503012] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:83:pipe B]

<7> [298.503704] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:108:pipe C]

<7> [298.504403] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [298.512725] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:110:eDP-1] adding connector to sysfs

<7> [298.515692] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:110:eDP-1] backlight device intel_backlight registered

<7> [298.516208] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:110:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [298.517250] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [298.520336] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:110:eDP-1] generating connector hotplug event

<7> [298.520492] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:118:DP-1] adding connector to sysfs

<7> [298.522851] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [298.526050] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:118:DP-1] generating connector hotplug event

<7> [298.526211] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:127:HDMI-A-1] adding connector to sysfs

<7> [298.527488] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:127:HDMI-A-1] generating connector hotplug event

<7> [298.527641] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:133:DP-2] adding connector to sysfs

<7> [298.529202] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [298.531749] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:133:DP-2] generating connector hotplug event

<7> [298.531955] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:139:HDMI-A-2] adding connector to sysfs

<7> [298.533158] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:139:HDMI-A-2] generating connector hotplug event

<6> [298.533279] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0

<7> [298.540232] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [298.573061] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [298.582693] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input39

<7> [298.585759] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [298.591035] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [298.592345] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:58:pipe A] not active, skipping

<7> [298.592787] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:83:pipe B] not active, skipping

<7> [298.593215] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:108:pipe C] not active, skipping

<7> [298.593616] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config

<7> [298.594746] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [298.595755] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:118:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [298.596223] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [298.597291] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [298.597701] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [298.598317] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [298.598762] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [298.598774] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [298.599421] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [298.600909] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [298.604143] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [298.604156] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [298.604648] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:127:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [298.605334] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [298.609880] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:133:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [298.610328] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [298.610999] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [298.611391] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [298.611973] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [298.612401] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [298.612413] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [298.612805] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [298.618570] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [298.618584] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [298.619296] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:139:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [298.620462] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [298.621040] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [298.621057] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [298.621715] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [298.622151] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [298.622552] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [298.623945] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [298.623958] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [298.623964] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [298.623999] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no

<7> [298.624311] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [298.624577] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [298.626276] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] status updated from unknown to connected

<7> [298.626305] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [298.626609] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes:

<7> [298.626619] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [298.626627] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [298.626636] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [298.626645] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [298.631116] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [298.631130] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [298.631139] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [298.631940] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [298.632355] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [298.632942] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [298.633402] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [298.633415] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [298.633809] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [298.639260] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [298.639274] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [298.639736] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [298.639752] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [298.639765] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [298.644264] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [298.644279] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [298.644288] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [298.644882] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [298.645290] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [298.648046] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [298.648428] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [298.648440] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [298.648718] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [298.652535] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [298.652549] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [298.653256] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [298.653291] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? yes

<7> [298.653302] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no

<7> [298.653311] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no

<7> [298.653320] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no

<7> [298.653328] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no

<7> [298.653442] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [298.653477] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] found preferred mode: 3200x1800

<7> [298.653486] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [298.653515] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:58:pipe A] desired mode 3200x1800 set (0,0)

<7> [298.653640] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [298.653694] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] no BIOS fb, allocating a new one

<7> [298.660670] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 3200x1800 fb: 0x00180000

<6> [298.662392] fbcon: i915drmfb (fb0) is primary device

<6> [298.663641] Console: switching to colour frame buffer device 200x56

<6> [298.663660] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device

<7> [298.663863] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [298.663884] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [298.663673] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9

<7> [298.664186] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0

<7> [298.664629] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [298.664595] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no

<7> [298.664654] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [298.665036] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no

<7> [298.665326] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [298.665429] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no

<7> [298.665734] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [298.665850] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes

<7> [298.666185] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [298.666255] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes

<7> [298.666671] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no

<7> [298.667111] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes

<7> [298.667489] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [298.667502] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [298.667524] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [298.667521] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no

<7> [298.667592] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no

<7> [298.667939] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes

<7> [298.668017] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [298.668334] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no

<7> [298.668426] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [298.668745] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes

<7> [298.669181] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no

<7> [298.669586] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes

<7> [298.670018] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes

<7> [298.670419] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no

<7> [298.670842] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no

<7> [298.671200] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes:

<7> [298.671222] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [298.671235] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [298.671248] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [298.671261] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [298.671262] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes

<7> [298.671677] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes

<7> [298.672096] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no

<7> [298.672508] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz

<7> [298.674568] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device

<7> [298.675004] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [298.675430] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [298.676483] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [298.676930] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [298.677336] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [298.678300] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [298.678321] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [298.678303] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9

<7> [298.678335] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [298.678648] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9

<7> [298.678986] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9

<7> [298.679309] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0

<7> [298.679307] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [298.679627] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0

<7> [298.679730] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [298.679947] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2

<7> [298.680261] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21

<7> [298.680415] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [298.680577] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000

<7> [298.680931] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [298.680902] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE

<7> [298.680944] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [298.681227] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48

<7> [298.681323] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [298.681553] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2

<7> [298.681882] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39

<7> [298.682197] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no

<7> [298.682521] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no

<7> [298.682847] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no

<7> [298.683174] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes

<7> [298.683501] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no

<7> [298.683865] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no

<7> [298.684193] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes

<7> [298.684512] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes

<7> [298.684858] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no

<7> [298.685176] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no

<7> [298.685491] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no

<7> [298.685816] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes

<7> [298.686164] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no

<7> [298.686524] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [298.686488] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no

<7> [298.686539] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [298.686812] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no

<7> [298.687014] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [298.687030] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [298.687042] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [298.687133] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no

<7> [298.687449] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no

<7> [298.687767] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no

<7> [298.688106] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes

<7> [298.688405] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes

<7> [298.688611] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no

<7> [298.688874] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no

<7> [298.689196] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no

<7> [298.689529] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no

<7> [298.689862] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no

<7> [298.690175] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no

<7> [298.690484] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no

<7> [298.690797] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no

<7> [298.691121] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes

<7> [298.691557] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [298.691578] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [298.691439] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no

<7> [298.691591] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [298.691747] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes

<7> [298.692031] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes

<7> [298.692338] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no

<7> [298.692297] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [298.692660] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes

<7> [298.692700] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [298.693005] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no

<7> [298.693328] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no

<7> [298.693327] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [298.693766] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [298.693656] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no

<7> [298.693777] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [298.693979] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no

<7> [298.694204] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [298.694290] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled

<7> [298.694591] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403

<7> [298.694787] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001

<7> [298.695071] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3

<7> [298.695318] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007

<7> [298.695629] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000

<7> [298.695967] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000

<7> [298.696281] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24

<7> [298.696593] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8

<7> [298.696913] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no

<7> [298.697222] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no

<7> [298.697522] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes

<7> [298.697703] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<6> [298.697788] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [298.697791] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [298.697793] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [298.697716] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [298.698178] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [298.698193] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? yes

<7> [298.698203] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no

<7> [298.698211] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no

<7> [298.698219] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no

<7> [298.698227] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no

<7> [298.698660] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [298.698711] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] found preferred mode: 3200x1800

<7> [298.698721] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [298.698802] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:58:pipe A] desired mode 3200x1800 set (0,0)

<7> [298.701310] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:110:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [298.701764] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:109:DDI A/PHY A][CRTC:58:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [298.702150] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000

<7> [298.702535] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [298.702922] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:109:DDI A/PHY A] [CRTC:58:pipe A]

<7> [298.703269] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [298.703632] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [298.704018] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [298.704400] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [298.704782] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [298.705192] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [298.705568] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [298.705946] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [298.706308] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [298.706672] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [298.707052] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [298.707418] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [298.707776] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [298.708156] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [298.708534] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [298.708918] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [298.709295] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [298.709671] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [298.710043] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [298.710401] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [298.710757] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [298.711135] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [298.711511] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [298.711896] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [298.712256] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [298.712620] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [298.712999] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [298.713364] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [298.713725] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [298.714111] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [298.714490] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [298.714878] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [298.715257] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [298.715635] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [298.716024] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [298.716399] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dpll_hw_state

<7> [298.716773] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [298.717136] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0

<7> [298.717496] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [298.717861] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [298.718226] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [298.718592] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [298.718970] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [298.719327] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [298.719675] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset

<6> [298.722450] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4

<7> [298.723644] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [298.724073] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [298.724430] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [298.724779] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [298.725172] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [298.725529] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [298.725918] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [298.726549] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [298.727060] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [298.727429] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [298.727782] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [298.728213] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [298.728572] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:58:pipe A] allocated DPLL 0

<7> [298.728998] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:58:pipe A] reserving DPLL 0

<7> [298.729363] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: yes [modeset]

<7> [298.729723] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [298.730122] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [298.730461] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [298.730812] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [298.731218] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [298.731573] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [298.731963] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [298.732325] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [298.732687] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [298.733082] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [298.733441] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [298.733802] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [298.734195] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [298.734556] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [298.734945] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [298.735304] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [298.735648] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [298.736034] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [298.736387] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [298.736724] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [298.737114] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [298.737475] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [298.737875] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [298.738233] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [298.738597] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [298.738993] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [298.739355] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [298.739718] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [298.740110] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [298.740455] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [298.740810] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [298.741193] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [298.741549] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [298.741978] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [298.742338] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [298.742699] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [298.743092] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [298.743455] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [298.743813] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [298.744189] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [298.744543] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [298.744897] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [298.745246] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [298.745601] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:111] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [298.745975] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [298.746335] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [298.746695] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [298.747101] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no

<7> [298.748992] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [298.750419] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A]

<7> [298.750793] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B]

<7> [298.751192] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A]

<7> [298.751543] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B]

<7> [298.751925] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C]

<7> [298.752272] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C]

<7> [298.752625] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A]

<7> [298.752996] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B]

<7> [298.753354] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C]

<7> [298.754760] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:58:pipe A]

<7> [298.755187] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [298.756037] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power on

<7> [298.756536] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [298.756964] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [298.766868] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [298.767262] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power on

<7> [298.767640] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000000b

<7> [298.968367] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [298.969512] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [298.971236] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [298.975978] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [298.976966] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [298.979440] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [298.980424] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [298.981434] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [298.985172] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Clock recovery OK

<7> [298.986416] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [298.987544] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [298.991542] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [298.992905] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [298.994364] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [298.997771] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [298.999034] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [299.001613] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [299.004721] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [299.006066] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [299.007721] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 37

<7> [299.012230] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 326 us, max time under evasion is 250 us

<7> [299.021407] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [299.027283] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1]

<7> [299.029092] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [299.031591] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp

<6> [299.038599] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])

<7> [299.039442] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [299.039518] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [299.039544] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [299.039815] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [299.039928] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [299.040248] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [299.044132] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [299.044718] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [299.046019] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [299.047417] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [299.048998] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [299.049042] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [299.049073] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [299.049207] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no

<7> [299.050547] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [299.051872] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [299.054292] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [299.059309] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes:

<7> [299.059362] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [299.059405] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [299.059449] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [299.059487] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [299.065286] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [299.065342] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [299.065384] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [299.068024] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [299.069773] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [299.071259] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [299.072703] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [299.072752] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [299.074021] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [299.079817] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [299.079894] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [299.081355] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [299.081407] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [299.081448] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [299.087198] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [299.087255] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [299.087295] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [299.089136] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [299.090297] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [299.094959] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [299.095772] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [299.095794] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [299.096711] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [299.101409] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [299.101433] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [299.102190] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [299.102216] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? yes

<7> [299.102233] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no

<7> [299.102249] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no

<7> [299.102264] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no

<7> [299.102278] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no

<7> [299.102376] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [299.102426] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] found preferred mode: 3200x1800

<7> [299.102442] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [299.103330] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:58:pipe A] desired mode 3200x1800 set (0,0)

<7> [299.103672] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [299.103899] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [299.103921] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [299.104663] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [299.105134] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [299.105636] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [299.106216] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [299.106235] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [299.106249] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [299.106316] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no

<7> [299.106728] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [299.107314] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [299.111451] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes:

<7> [299.111467] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [299.111478] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [299.111622] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [299.111633] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [299.116202] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [299.116371] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [299.116387] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [299.117560] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [299.118004] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [299.118590] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [299.119076] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [299.119089] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [299.119505] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [299.123160] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [299.123176] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [299.123649] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [299.123806] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [299.123820] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [299.126633] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [299.127248] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [299.127669] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [299.128065] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [299.128442] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [299.128946] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [299.128828] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [299.129092] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [299.129104] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [299.129227] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [299.129603] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [299.129740] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [299.129980] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [299.130089] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [299.130967] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [299.131359] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [299.131369] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [299.131662] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [299.136750] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [299.136766] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [299.137242] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [299.146888] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [299.146906] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [299.151364] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<6> [299.151557] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input40

<7> [299.152091] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [299.152101] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [299.152654] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [299.153033] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [299.153572] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [299.155959] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [299.155972] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [299.156354] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [299.161508] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [299.161524] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [299.161988] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [299.162951] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [299.162965] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [299.167491] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<6> [299.172235] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input41

<7> [299.173374] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [299.173394] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [299.177914] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [299.178290] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [299.178861] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<6> [299.179171] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input42

<7> [299.179827] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [299.179864] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [299.183738] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [299.187457] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [299.187470] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [299.187793] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [299.190880] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [299.190896] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [299.191345] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [299.191714] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [299.192086] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [299.192477] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [299.192489] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [299.192498] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [299.192538] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no

<7> [299.192919] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [299.193268] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [299.196388] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes:

<7> [299.196401] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [299.196413] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [299.196461] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [299.196472] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [299.204599] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [299.204657] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [299.204668] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [299.207125] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [299.207476] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [299.208006] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [299.208409] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [299.208420] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [299.219880] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [299.227631] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [299.227648] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [299.228224] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [299.228277] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [299.228289] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [299.232717] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [299.232760] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [299.232769] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [299.233494] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [299.233740] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [299.234187] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [299.234443] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [299.234452] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [299.234667] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [299.237726] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [299.237737] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [299.238406] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [299.239226] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:143]

<7> [300.228114] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [300.279366] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:58:pipe A]

<7> [300.279727] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [300.280415] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [300.281065] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [300.281610] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [300.282405] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [300.283042] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [300.283980] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [300.285153] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [300.286423] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [300.287607] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [300.288779] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [300.289935] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [300.291020] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [300.291912] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [300.292749] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [300.294078] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [300.295419] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [300.296748] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [300.298073] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [300.299395] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [300.300594] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [300.301535] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [300.302591] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [300.303499] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [300.304551] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [300.305415] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [300.306502] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [300.307413] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [300.308486] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [300.309745] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [300.310779] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [300.311678] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [300.312600] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [300.313472] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [300.314385] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [300.315273] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [300.316223] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [300.317094] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [300.318015] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [300.319185] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset

<7> [300.320198] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0

<7> [300.321255] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [300.322205] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [300.323086] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [300.323986] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [300.324775] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [300.325616] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [300.326563] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [300.327689] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [300.328740] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz

<7> [300.329777] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [300.330834] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [300.332161] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [300.333493] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset]

<7> [300.334812] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no

<7> [300.336121] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [300.337407] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no

<7> [300.338804] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [300.344486] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [300.550261] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0

<7> [300.551611] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [300.556927] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off

<7> [300.557391] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [300.558049] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [300.558725] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short

<7> [300.559463] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [300.610781] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [300.610819] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [300.612213] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long

<7> [300.612804] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [300.613469] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [300.615380] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [300.615778] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A]

<7> [300.616788] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [300.617619] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [300.619076] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [300.622043] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A]

<7> [300.623349] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B]

<7> [300.624288] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A]

<7> [300.625547] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B]

<7> [300.626904] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C]

<7> [300.628241] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C]

<7> [300.629580] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A]

<7> [300.630896] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B]

<7> [300.632097] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C]

<7> [300.633200] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1]

<7> [300.635090] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [300.637579] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:83:pipe B]

<7> [300.638660] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:108:pipe C]

<7> [300.742475] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [300.744067] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [300.745031] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [300.746527] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [300.749437] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [300.771017] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [300.854856] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:110:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [300.856051] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:109:DDI A/PHY A][CRTC:58:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [300.857034] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000

<7> [300.858389] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [300.860151] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:109:DDI A/PHY A] [CRTC:58:pipe A]

<7> [300.861530] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [300.862766] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [300.864048] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [300.865380] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [300.866575] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [300.868031] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [300.869049] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [300.870328] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [300.871375] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [300.872556] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [300.873635] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [300.875088] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [300.876194] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [300.877443] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [300.878466] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [300.879650] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [300.880662] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [300.881990] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [300.882831] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [300.883902] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [300.885363] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [300.886478] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [300.887707] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [300.888672] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [300.889815] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [300.890728] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [300.891828] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [300.892945] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [300.894381] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [300.895483] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [300.896696] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [300.897642] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [300.898782] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [300.899699] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [300.900743] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [300.901766] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [300.903001] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [300.904463] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [300.905660] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [300.906680] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset

<7> [300.907840] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [300.908718] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [300.909601] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [300.910449] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [300.911373] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [300.912241] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [300.913203] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [300.914570] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [300.915707] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [300.916651] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [300.917673] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [300.918538] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [300.919599] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:58:pipe A] allocated DPLL 0

<7> [300.920505] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:58:pipe A] reserving DPLL 0

<7> [300.921571] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: yes [modeset]

<7> [300.922505] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [300.923813] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [300.924933] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [300.926029] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [300.926846] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [300.927727] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [300.928764] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [300.929685] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [300.930732] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [300.931610] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [300.932925] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [300.933829] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [300.934744] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [300.935788] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [300.936660] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [300.937714] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [300.938579] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [300.939624] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [300.940594] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [300.941717] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [300.942654] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [300.943714] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [300.944609] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [300.945638] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [300.946541] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [300.947583] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [300.948494] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [300.949746] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [300.950843] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [300.951900] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [300.952815] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [300.953726] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [300.954664] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [300.955537] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [300.956441] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [300.957347] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [300.958304] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [300.959172] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [300.960148] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [300.961319] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [300.962284] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [300.962825] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [300.963453] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [300.964151] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:111] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [300.964699] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [300.965277] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [300.965980] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [300.966519] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no

<7> [300.979001] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [300.988345] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [300.988677] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [300.989302] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [300.989991] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [300.990655] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [300.991703] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A]

<7> [300.992014] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B]

<7> [300.992284] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A]

<7> [300.992553] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B]

<7> [300.992821] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C]

<7> [300.993176] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C]

<7> [300.993487] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A]

<7> [300.993772] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B]

<7> [300.994067] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C]

<7> [300.994561] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:58:pipe A]

<7> [300.994850] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [300.995355] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power on

<7> [300.995744] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (117 ms remaining)

<7> [301.118100] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [301.169047] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [301.170218] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power on

<7> [301.171242] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003

<7> [301.220156] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [301.221265] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long

<7> [301.222280] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [301.223434] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [301.374662] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [301.376162] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [301.378104] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [301.381079] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on

<7> [301.382657] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b

<7> [301.388256] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [301.389039] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [301.392432] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [301.394260] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [301.395838] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [301.399850] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Clock recovery OK

<7> [301.400945] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [301.401824] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [301.405084] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [301.406055] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [301.407046] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [301.410856] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [301.411999] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [301.413006] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [301.416577] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [301.417631] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [301.419606] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [301.422570] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [301.423548] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [301.425230] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 37

<7> [301.429155] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 380 us, max time under evasion is 250 us

<7> [301.438413] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [301.443446] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1]

<7> [301.444611] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [301.449300] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [301.450716] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [301.457798] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [301.459528] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [301.460374] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [301.461631] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [301.462569] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [301.462597] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [301.463402] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [301.468616] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [301.468658] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [301.470991] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [301.476665] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [301.478464] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [301.479817] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [301.481794] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [301.483166] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [301.483202] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [301.485064] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [301.490897] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [301.490937] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [301.599453] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [301.600273] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [301.613065] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [301.638579] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [301.638912] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [301.651048] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [301.703768] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [301.704604] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [301.712743] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [301.713133] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [301.713438] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [301.713726] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [301.714049] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [301.714430] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [301.714727] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [301.715041] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [301.715403] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [301.716315] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [301.803623] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [301.804813] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [301.805370] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [301.806120] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<6> [301.811597] Console: switching to colour dummy device 80x25

<7> [301.815847] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:111] is removed

<7> [301.816166] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [301.817317] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [301.818773] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [301.819867] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [301.820929] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [301.822838] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [301.838711] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [301.843292] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [301.844246] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [301.845171] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [301.846072] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [301.846971] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [301.847842] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [301.848738] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [301.849656] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [301.850698] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [301.851430] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [301.852474] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [301.853553] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [301.854617] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [301.855846] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [301.857198] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [301.858229] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [301.859075] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [301.859733] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [301.860719] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [301.861798] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [301.863021] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [301.864111] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [301.865189] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [301.865962] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [301.866615] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [301.867657] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [301.868731] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [301.869807] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [301.870901] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [301.871938] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [301.872600] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [301.873495] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [301.874560] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [301.875618] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [301.876678] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [301.877753] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [301.878676] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [301.879424] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [301.880449] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [301.881530] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset

<7> [301.882590] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0

<7> [301.884068] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [301.885145] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [301.886025] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [301.887125] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [301.888192] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [301.889239] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [301.890306] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset]

<7> [301.891297] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no

<7> [301.892019] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [301.893049] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no

<7> [301.895392] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [302.102367] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0

<7> [302.104659] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [302.124593] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off

<7> [302.125116] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [302.125638] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [302.126182] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short

<7> [302.126640] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [302.178166] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [302.179119] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [302.179279] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long

<7> [302.180294] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [302.181447] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A]

<7> [302.181794] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [302.183452] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [302.185239] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [302.187090] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [302.190962] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A]

<7> [302.192972] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B]

<7> [302.194578] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A]

<7> [302.196361] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B]

<7> [302.198094] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C]

<7> [302.199796] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C]

<7> [302.201313] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A]

<7> [302.202846] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B]

<7> [302.204384] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C]

<7> [302.205979] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1]

<7> [302.209159] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [302.287717] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [302.326081] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:110:eDP-1] removing connector from sysfs

<7> [302.365869] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:118:DP-1] removing connector from sysfs

<7> [302.374324] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:127:HDMI-A-1] removing connector from sysfs

<7> [302.391849] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:133:DP-2] removing connector from sysfs

<7> [302.401991] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:139:HDMI-A-2] removing connector from sysfs

<7> [302.430384] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (250 ms remaining)

<7> [302.686534] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [302.779224] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<6> [303.384234] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS

<6> [303.385862] [IGT] i915_pm_rpm: exiting, ret=0

Results for igt@i915_pm_rpm@module-reload