Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.35 seconds
Igt-Version 
IGT-Version: 2.3-gc49da3be7 (x86_64) (Linux: 6.19.0-CI_DRM_17961-g5e0595fbb024+ x86_64)
Out 
Using IGT_SRANDOM=1770661845 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.348s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.348s)
Dmesg
<6> [270.445021] Console: switching to colour dummy device 80x25
<6> [270.445255] [IGT] kms_force_connector_basic: executing
<7> [270.462326] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [270.465113] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [270.485338] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [270.488662] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:528:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [270.488675] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [270.488684] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [270.493065] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<7> [270.493113] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [270.493120] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [270.497458] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<7> [270.497500] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [270.497503] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [270.501736] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<6> [270.501940] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [270.502242] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:528:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [270.502248] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [270.502251] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [270.560842] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [270.566497] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [270.566518] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [270.566777] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [270.572311] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [270.572318] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [270.572520] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] status updated from disconnected to connected
<7> [270.572564] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] probed modes:
<7> [270.572567] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [270.572570] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [270.572572] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [270.572575] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [270.572577] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [270.572597] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [270.572600] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [270.580813] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [270.580904] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [270.630847] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [270.636526] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [270.636537] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [270.636658] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [270.642127] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [270.642133] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [270.642283] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] probed modes:
<7> [270.642286] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [270.642289] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [270.642292] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [270.642294] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [270.642297] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [270.642440] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:528:HDMI-A-1] EDID override set
<7> [270.642460] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [270.642463] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [270.642620] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:528:HDMI-A-1] ELD monitor IGT
<7> [270.642622] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:528:HDMI-A-1] ELD size 24, SAD count 0
<7> [270.701382] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [270.707033] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [270.707148] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [270.707158] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [270.707162] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] probed modes:
<7> [270.707165] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [270.707168] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [270.707172] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [270.707175] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [270.707178] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [270.707181] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [270.707295] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:528:HDMI-A-1] EDID override set
<7> [270.707317] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [270.707321] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [270.707518] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:528:HDMI-A-1] ELD monitor IGT
<7> [270.707520] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:528:HDMI-A-1] ELD size 24, SAD count 0
<7> [270.707522] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:528:HDMI-A-1] EDID changed, epoch counter 4
<7> [270.765846] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [270.771503] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [270.771618] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [270.771627] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] probed modes:
<7> [270.771631] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [270.771636] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [270.771640] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [270.771645] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [270.771649] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [270.771764] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:528:HDMI-A-1] EDID override reset
<7> [270.771783] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [270.771786] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [270.830381] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [270.836048] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [270.836057] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [270.836277] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [270.841772] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [270.841777] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [270.841909] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:528:HDMI-A-1] EDID changed, epoch counter 5
<7> [270.841945] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [270.841949] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [270.841953] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] probed modes:
<7> [270.841955] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [270.841958] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [270.841960] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [270.841963] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [270.841966] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [270.842105] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:528:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [270.842109] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [270.842113] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [270.846328] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] status updated from connected to disconnected
<7> [270.846335] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<7> [270.846361] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [270.846364] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [270.846518] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [270.846560] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [270.850571] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<6> [270.850854] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [270.851254] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [270.852280] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:507:eDP-1] force updated from 0 to 0 or reprobing
<7> [270.852284] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1]
<7> [270.852288] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1]
<7> [270.852886] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [270.853320] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [270.853443] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [270.853562] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [270.853693] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [270.853696] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor
<7> [270.853698] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0
<7> [270.853708] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: no
<7> [270.853838] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [270.853952] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [270.854676] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes:
<7> [270.854679] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [270.854701] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1]
<7> [270.854704] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1]
<7> [270.855264] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [270.855735] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [270.855865] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [270.855981] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [270.856104] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [270.856107] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor
<7> [270.856109] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0
<7> [270.856118] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: no
<7> [270.856230] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [270.856343] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [270.857111] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes:
<7> [270.857114] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [270.857179] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:507:eDP-1] EDID override reset
<7> [270.857189] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1]
<7> [270.857192] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1]
<7> [270.857728] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [270.858253] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [270.858371] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [270.858482] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [270.858601] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [270.858603] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor
<7> [270.858605] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0
<7> [270.858614] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: no
<7> [270.858726] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [270.858849] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [270.859571] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes:
<7> [270.859574] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [270.859641] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:516:DP-1] EDID override reset
<7> [270.859651] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1]
<7> [270.859654] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:516:DP-1]
<7> [270.863838] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] disconnected
<7> [270.863931] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:528:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [270.863934] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [270.863937] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [270.868148] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<7> [270.868166] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [270.868168] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [270.872340] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<7> [270.872398] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:528:HDMI-A-1] EDID override reset
<7> [270.872408] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [270.872410] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [270.876636] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<7> [270.876700] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:534:DP-2] EDID override reset
<7> [270.876709] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2]
<7> [270.876712] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:534:DP-2]
<7> [270.877139] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_TC1
<7> [270.899941] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [270.921724] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [270.943507] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [270.965225] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [270.986942] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.008674] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.030411] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.052128] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.073846] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.095563] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.117282] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.138981] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.160685] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.182482] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.204219] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.225936] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.247654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.269372] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.291092] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.312818] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.314842] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [271.314852] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [271.314856] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [271.334558] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.356307] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.378027] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.399745] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.421494] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.443211] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.464929] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.486647] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.508372] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.530092] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.551833] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.573550] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.573714] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -110
<7> [271.573734] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected
<7> [271.573846] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:543:DP-3] EDID override reset
<7> [271.573860] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3]
<7> [271.573864] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:543:DP-3]
<7> [271.574088] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_TC1
<7> [271.574497] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [271.574714] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected
<7> [271.574779] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:552:DP-4] EDID override reset
<7> [271.574789] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4]
<7> [271.574792] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:552:DP-4]
<7> [271.575028] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [271.575333] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4] disconnected
<7> [271.575424] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:561:DP-5] EDID override reset
<7> [271.575439] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:561:DP-5]
<7> [271.575443] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:561:DP-5]
<7> [271.575823] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [271.576019] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:561:DP-5] disconnected
<6> [271.576513] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [271.576983] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [271.589166] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [271.589171] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [271.589214] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1]
<7> [271.589218] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1]
<7> [271.589824] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [271.590347] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [271.590495] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [271.590643] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [271.590796] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [271.590799] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor
<7> [271.590802] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0
<7> [271.590825] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: no
<7> [271.590957] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [271.591080] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [271.591947] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes:
<7> [271.591952] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [271.591956] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1]
<7> [271.591960] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:516:DP-1]
<7> [271.596180] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] disconnected
<7> [271.596186] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]
<7> [271.596188] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]
<7> [271.600406] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected
<7> [271.600409] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2]
<7> [271.600412] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:534:DP-2]
<7> [271.600773] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_TC1
<7> [271.623229] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.644980] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.666730] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.688481] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.710234] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.731962] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.753680] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.775431] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.797136] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.818853] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.840603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.862387] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.884104] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.905823] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.927573] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.949323] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.971041] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [271.992759] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [272.014542] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [272.036292] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [272.057990] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [272.079708] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [272.101478] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [272.123196] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [272.144949] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [272.166698] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [272.188449] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [272.210166] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [272.231884] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [272.253601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [272.275356] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [272.297108] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [272.297274] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -110
<7> [272.297292] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected
<7> [272.297298] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3]
<7> [272.297303] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:543:DP-3]
<7> [272.297621] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected
<7> [272.297627] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4]
<7> [272.297632] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:552:DP-4]
<7> [272.298003] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4] disconnected
<7> [272.298008] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:561:DP-5]
<7> [272.298013] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:561:DP-5]
<7> [272.298272] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:561:DP-5] disconnected
<7> [272.298275] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] enabled? yes
<7> [272.298280] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:516:DP-1] enabled? no
<7> [272.298283] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:528:HDMI-A-1] enabled? no
<7> [272.298285] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:DP-2] enabled? no
<7> [272.298288] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:DP-3] enabled? no
<7> [272.298291] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:552:DP-4] enabled? no
<7> [272.298294] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:561:DP-5] enabled? no
<7> [272.298318] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [272.298331] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] found preferred mode: 2880x1800
<7> [272.298335] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7> [272.298357] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 2880x1800 set (0,0)
<7> [272.310315] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [272.321402] Console: switching to colour frame buffer device 180x56
Created at 2026-02-10 01:37:54