<5>[ 0.000000] Linux version 6.19.0-rc7-CI_DRM_17911-gfeea7da320aa+ (kbuild@gfx-ci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Fri Jan 30 10:37:45 UTC 2026 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] Hygon HygonGenuine <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] zhaoxin Shanghai <6>[ 0.000000] x86/tme: not enabled by BIOS <4>[ 0.000000] x86/CPU: Running old microcode <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000060a39fff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000060a3a000-0x0000000063db1fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000063db2000-0x0000000063ed6fff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x0000000063ed7000-0x0000000063ffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x0000000063fff000-0x0000000063ffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000064000000-0x00000000787fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000000ffffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x63ffe000 ACPI 2.0=0x63ffe014 TPMFinalLog=0x63e0c000 SMBIOS=0x60b11000 MEMATTR=0x5bd90698 ESRT=0x5bda2798 MOKvar=0x60c46000 TPMEventLog=0x63f0e018 <6>[ 0.000000] efi: Remove mem307: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem309: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.6 present. <6>[ 0.000000] DMI: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024 <6>[ 0.000000] DMI: Memory slots populated: 8/8 <6>[ 0.000000] tsc: Detected 3400.000 MHz processor <6>[ 0.000000] tsc: Detected 3379.200 MHz TSC <7>[ 0.000011] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000013] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000021] last_pfn = 0x880000 max_arch_pfn = 0x400000000 <6>[ 0.000025] MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs <6>[ 0.000027] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.000608] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000610] last_pfn = 0x64000 max_arch_pfn = 0x400000000 <6>[ 0.005046] esrt: Reserving ESRT space from 0x000000005bda2798 to 0x000000005bda28c0. <7>[ 0.005057] e820: update [mem 0x5bda2000-0x5bda2fff] usable ==> reserved <6>[ 0.005080] Using GB pages for direct mapping <6>[ 0.005803] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes <6>[ 0.005805] printk: early log buf free: 258704(98%) <6>[ 0.005806] Secure boot disabled <6>[ 0.005809] ACPI: Early table checksum verification disabled <6>[ 0.005813] ACPI: RSDP 0x0000000063FFE014 000024 (v02 INTEL ) <6>[ 0.005817] ACPI: XSDT 0x0000000063F15228 000184 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005822] ACPI: FACP 0x0000000063FDC000 000114 (v06 INTEL MTL 00000002 01000013) <6>[ 0.005826] ACPI: DSDT 0x0000000063F55000 083F8A (v02 INTEL MTL 00000002 01000013) <6>[ 0.005828] ACPI: FACS 0x0000000063DF2000 000040 <6>[ 0.005830] ACPI: SSDT 0x0000000063FFC000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.005832] ACPI: SSDT 0x0000000063FFB000 00070D (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.005833] ACPI: SSDT 0x0000000063FFA000 0005E4 (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.005835] ACPI: SSDT 0x0000000063FF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.005837] ACPI: SSDT 0x0000000063FF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.005838] ACPI: SSDT 0x0000000063FF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.005840] ACPI: SSDT 0x0000000063FF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.005841] ACPI: SSDT 0x0000000063FF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.005843] ACPI: SSDT 0x0000000063FF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.005845] ACPI: SSDT 0x0000000063FED000 003BC8 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.005846] ACPI: DTPR 0x0000000063FEC000 000098 (v01 00000000 00000000) <6>[ 0.005848] ACPI: SSDT 0x0000000063FEB000 000D03 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.005850] ACPI: SSDT 0x0000000063FE8000 002494 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.005851] ACPI: SSDT 0x0000000063FDE000 009AB7 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.005853] ACPI: SSDT 0x0000000063FDD000 0000F9 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.005855] ACPI: HPET 0x0000000063FDB000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005856] ACPI: APIC 0x0000000063FDA000 000358 (v05 INTEL MTL 00000002 01000013) <6>[ 0.005858] ACPI: MCFG 0x0000000063FD9000 00003C (v01 INTEL MTL 00000002 01000013) <6>[ 0.005859] ACPI: SSDT 0x0000000063F45000 00FCEF (v02 INTEL MtlP_Rvp 00001000 INTL 20210930) <6>[ 0.005861] ACPI: SSDT 0x0000000063F43000 00147F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.005862] ACPI: SSDT 0x0000000063F3E000 00389C (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.005864] ACPI: SSDT 0x0000000063F38000 00535A (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.005865] ACPI: SSDT 0x0000000063FFD000 00060E (v02 INTEL Tpm2Tabl 00001000 INTL 20210930) <6>[ 0.005867] ACPI: TPM2 0x0000000063F37000 00004C (v04 INTEL MTL 00000002 01000013) <6>[ 0.005868] ACPI: LPIT 0x0000000063F36000 0000CC (v01 INTEL MTL 00000002 01000013) <6>[ 0.005870] ACPI: WSMT 0x0000000063F35000 000028 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005872] ACPI: SSDT 0x0000000063F34000 000CA6 (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.005874] ACPI: SSDT 0x0000000063F2E000 00587D (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.005875] ACPI: DBGP 0x0000000063F2D000 000034 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005877] ACPI: DBG2 0x0000000063F2C000 000054 (v00 INTEL MTL 00000002 01000013) <6>[ 0.005878] ACPI: NHLT 0x0000000063F2B000 00098B (v00 INTEL MTL 00000002 01000013) <6>[ 0.005880] ACPI: SSDT 0x0000000063F29000 001191 (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.005881] ACPI: SSDT 0x0000000063F23000 005CAE (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.005883] ACPI: ECDT 0x0000000063F22000 000069 (v01 MTL 00000002 01000013) <6>[ 0.005884] ACPI: DMAR 0x0000000063F21000 0000A8 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005886] ACPI: FPDT 0x0000000063F20000 000044 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005887] ACPI: SSDT 0x0000000063F1E000 001015 (v02 INTEL xh_mtlp3 00000000 INTL 20210930) <6>[ 0.005889] ACPI: SSDT 0x0000000063F1B000 00281A (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.005890] ACPI: SSDT 0x0000000063F18000 0028D3 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.005892] ACPI: SSDT 0x0000000063F16000 0011A0 (v02 INTEL St00Ssdt 00001000 INTL 20210930) <6>[ 0.005893] ACPI: ASF! 0x0000000063F42000 000074 (v32 INTEL MTL 00000002 01000013) <6>[ 0.005895] ACPI: PHAT 0x0000000063F14000 000810 (v01 INTEL MTL 00000005 MSFT 0100000D) <6>[ 0.005897] ACPI: BGRT 0x0000000063F13000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005898] ACPI: Reserving FACP table memory at [mem 0x63fdc000-0x63fdc113] <6>[ 0.005899] ACPI: Reserving DSDT table memory at [mem 0x63f55000-0x63fd8f89] <6>[ 0.005899] ACPI: Reserving FACS table memory at [mem 0x63df2000-0x63df203f] <6>[ 0.005900] ACPI: Reserving SSDT table memory at [mem 0x63ffc000-0x63ffc38b] <6>[ 0.005900] ACPI: Reserving SSDT table memory at [mem 0x63ffb000-0x63ffb70c] <6>[ 0.005901] ACPI: Reserving SSDT table memory at [mem 0x63ffa000-0x63ffa5e3] <6>[ 0.005901] ACPI: Reserving SSDT table memory at [mem 0x63ff9000-0x63ff91aa] <6>[ 0.005901] ACPI: Reserving SSDT table memory at [mem 0x63ff8000-0x63ff8393] <6>[ 0.005902] ACPI: Reserving SSDT table memory at [mem 0x63ff6000-0x63ff7bae] <6>[ 0.005902] ACPI: Reserving SSDT table memory at [mem 0x63ff4000-0x63ff561f] <6>[ 0.005902] ACPI: Reserving SSDT table memory at [mem 0x63ff2000-0x63ff3348] <6>[ 0.005903] ACPI: Reserving SSDT table memory at [mem 0x63ff1000-0x63ff1fba] <6>[ 0.005903] ACPI: Reserving SSDT table memory at [mem 0x63fed000-0x63ff0bc7] <6>[ 0.005904] ACPI: Reserving DTPR table memory at [mem 0x63fec000-0x63fec097] <6>[ 0.005904] ACPI: Reserving SSDT table memory at [mem 0x63feb000-0x63febd02] <6>[ 0.005904] ACPI: Reserving SSDT table memory at [mem 0x63fe8000-0x63fea493] <6>[ 0.005905] ACPI: Reserving SSDT table memory at [mem 0x63fde000-0x63fe7ab6] <6>[ 0.005905] ACPI: Reserving SSDT table memory at [mem 0x63fdd000-0x63fdd0f8] <6>[ 0.005905] ACPI: Reserving HPET table memory at [mem 0x63fdb000-0x63fdb037] <6>[ 0.005906] ACPI: Reserving APIC table memory at [mem 0x63fda000-0x63fda357] <6>[ 0.005906] ACPI: Reserving MCFG table memory at [mem 0x63fd9000-0x63fd903b] <6>[ 0.005907] ACPI: Reserving SSDT table memory at [mem 0x63f45000-0x63f54cee] <6>[ 0.005907] ACPI: Reserving SSDT table memory at [mem 0x63f43000-0x63f4447e] <6>[ 0.005907] ACPI: Reserving SSDT table memory at [mem 0x63f3e000-0x63f4189b] <6>[ 0.005908] ACPI: Reserving SSDT table memory at [mem 0x63f38000-0x63f3d359] <6>[ 0.005908] ACPI: Reserving SSDT table memory at [mem 0x63ffd000-0x63ffd60d] <6>[ 0.005908] ACPI: Reserving TPM2 table memory at [mem 0x63f37000-0x63f3704b] <6>[ 0.005909] ACPI: Reserving LPIT table memory at [mem 0x63f36000-0x63f360cb] <6>[ 0.005909] ACPI: Reserving WSMT table memory at [mem 0x63f35000-0x63f35027] <6>[ 0.005909] ACPI: Reserving SSDT table memory at [mem 0x63f34000-0x63f34ca5] <6>[ 0.005910] ACPI: Reserving SSDT table memory at [mem 0x63f2e000-0x63f3387c] <6>[ 0.005910] ACPI: Reserving DBGP table memory at [mem 0x63f2d000-0x63f2d033] <6>[ 0.005911] ACPI: Reserving DBG2 table memory at [mem 0x63f2c000-0x63f2c053] <6>[ 0.005911] ACPI: Reserving NHLT table memory at [mem 0x63f2b000-0x63f2b98a] <6>[ 0.005911] ACPI: Reserving SSDT table memory at [mem 0x63f29000-0x63f2a190] <6>[ 0.005912] ACPI: Reserving SSDT table memory at [mem 0x63f23000-0x63f28cad] <6>[ 0.005912] ACPI: Reserving ECDT table memory at [mem 0x63f22000-0x63f22068] <6>[ 0.005912] ACPI: Reserving DMAR table memory at [mem 0x63f21000-0x63f210a7] <6>[ 0.005913] ACPI: Reserving FPDT table memory at [mem 0x63f20000-0x63f20043] <6>[ 0.005914] ACPI: Reserving SSDT table memory at [mem 0x63f1e000-0x63f1f014] <6>[ 0.005914] ACPI: Reserving SSDT table memory at [mem 0x63f1b000-0x63f1d819] <6>[ 0.005914] ACPI: Reserving SSDT table memory at [mem 0x63f18000-0x63f1a8d2] <6>[ 0.005915] ACPI: Reserving SSDT table memory at [mem 0x63f16000-0x63f1719f] <6>[ 0.005915] ACPI: Reserving ASF! table memory at [mem 0x63f42000-0x63f42073] <6>[ 0.005916] ACPI: Reserving PHAT table memory at [mem 0x63f14000-0x63f1480f] <6>[ 0.005917] ACPI: Reserving BGRT table memory at [mem 0x63f13000-0x63f13037] <6>[ 0.006008] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.006219] No NUMA configuration found <6>[ 0.006220] Faking a node at [mem 0x0000000000000000-0x000000087fffffff] <6>[ 0.006227] NODE_DATA(0) allocated [mem 0x87fb52e40-0x87fb7dfff] <6>[ 0.006388] Zone ranges: <6>[ 0.006390] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.006391] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.006392] Normal [mem 0x0000000100000000-0x000000087fffffff] <6>[ 0.006393] Device empty <6>[ 0.006393] Movable zone start for each node <6>[ 0.006394] Early memory node ranges <6>[ 0.006394] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.006395] node 0: [mem 0x0000000000100000-0x0000000060a39fff] <6>[ 0.006396] node 0: [mem 0x0000000063fff000-0x0000000063ffffff] <6>[ 0.006396] node 0: [mem 0x0000000100000000-0x000000087fffffff] <6>[ 0.006398] Initmem setup node 0 [mem 0x0000000000001000-0x000000087fffffff] <6>[ 0.006404] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.006427] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.008608] On node 0, zone DMA32: 13765 pages in unavailable ranges <6>[ 0.050636] On node 0, zone Normal: 16384 pages in unavailable ranges <6>[ 0.051095] ACPI: PM-Timer IO Port: 0x1808 <4>[ 0.051100] CPU topo: Boot CPU APIC ID not the first enumerated APIC ID: 20 != 10 <4>[ 0.051101] CPU topo: [Firmware Bug]: APIC enumeration order not specification compliant <6>[ 0.051105] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.051149] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.051153] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.051154] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.051158] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.051158] ACPI: HPET id: 0x8086a201 base: 0xfed00000 <7>[ 0.051176] e820: update [mem 0x5bd41000-0x5bd5bfff] usable ==> reserved <6>[ 0.051184] TSC deadline timer available <6>[ 0.051187] CPU topo: Max. logical packages: 1 <6>[ 0.051188] CPU topo: Max. logical dies: 1 <6>[ 0.051188] CPU topo: Max. dies per package: 1 <6>[ 0.051191] CPU topo: Max. threads per core: 2 <6>[ 0.051191] CPU topo: Num. cores per package: 16 <6>[ 0.051192] CPU topo: Num. threads per package: 22 <6>[ 0.051192] CPU topo: Allowing 22 present CPUs plus 0 hotplug CPUs <6>[ 0.051213] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.051215] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.051217] PM: hibernation: Registered nosave memory: [mem 0x5bd41000-0x5bd5bfff] <6>[ 0.051219] PM: hibernation: Registered nosave memory: [mem 0x5bda2000-0x5bda2fff] <6>[ 0.051221] PM: hibernation: Registered nosave memory: [mem 0x60a3a000-0x63ffefff] <6>[ 0.051222] PM: hibernation: Registered nosave memory: [mem 0x64000000-0xffffffff] <6>[ 0.051225] [mem 0x78800000-0xfed1ffff] available for PCI devices <6>[ 0.051227] Booting paravirtualized kernel on bare hardware <6>[ 0.051229] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.051243] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:22 nr_cpu_ids:22 nr_node_ids:1 <6>[ 0.052777] percpu: Embedded 87 pages/cpu s233472 r8192 d114688 u524288 <7>[ 0.052785] pcpu-alloc: s233472 r8192 d114688 u524288 alloc=1*2097152 <7>[ 0.052786] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 <7>[ 0.052790] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 <7>[ 0.052794] pcpu-alloc: [0] 16 17 18 19 [0] 20 21 -- -- <5>[ 0.052822] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <7>[ 0.052954] blacklisting initcall simpledrm_platform_driver_init <5>[ 0.052974] random: crng init done <6>[ 0.055780] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.057189] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.057331] software IO TLB: area num 32. <6>[ 0.069506] Fallback order for Node 0: 0 <6>[ 0.069510] Built 1 zonelists, mobility grouping on. Total pages: 8260057 <6>[ 0.069511] Policy zone: Normal <6>[ 0.069521] mem auto-init: stack:off, heap alloc:on, heap free:off <6>[ 0.069522] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.069525] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) <6>[ 0.071083] stackdepot: allocating space for 8192 stack pools via memblock <4>[ 0.112895] ********************************************************** <4>[ 0.112896] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.112896] ** ** <4>[ 0.112897] ** This system shows unhashed kernel memory addresses ** <4>[ 0.112897] ** via the console, logs, and other interfaces. This ** <4>[ 0.112897] ** might reduce the security of your system. ** <4>[ 0.112897] ** ** <4>[ 0.112898] ** If you see this message and you are not debugging ** <4>[ 0.112898] ** the kernel, report this immediately to your system ** <4>[ 0.112898] ** administrator! ** <4>[ 0.112898] ** ** <4>[ 0.112899] ** Use hash_pointers=always to force this mode off ** <4>[ 0.112899] ** ** <4>[ 0.112899] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.112899] ********************************************************** <6>[ 0.114364] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=22, Nodes=1 <6>[ 0.125004] ftrace: allocating 61101 entries in 240 pages <6>[ 0.125006] ftrace: allocated 240 pages with 4 groups <6>[ 0.126784] Dynamic Preempt: voluntary <6>[ 0.127843] Running RCU self tests <6>[ 0.127844] Running RCU synchronous self tests <6>[ 0.127845] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.127845] rcu: RCU lockdep checking is enabled. <6>[ 0.127846] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=22. <6>[ 0.127847] Trampoline variant of Tasks RCU enabled. <6>[ 0.127847] Rude variant of Tasks RCU enabled. <6>[ 0.127847] Tracing variant of Tasks RCU enabled. <6>[ 0.127848] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.127848] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=22 <6>[ 0.127975] Running RCU synchronous self tests <6>[ 0.127984] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22. <6>[ 0.127989] RCU Tasks Rude: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22. <6>[ 0.127993] RCU Tasks Trace: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22. <6>[ 0.140226] NR_IRQS: 524544, nr_irqs: 2232, preallocated irqs: 16 <6>[ 0.140791] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.141395] Console: colour dummy device 80x25 <6>[ 0.141405] printk: legacy console [tty0] enabled <6>[ 0.142586] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <6>[ 0.142594] ... MAX_LOCKDEP_SUBCLASSES: 8 <6>[ 0.142598] ... MAX_LOCK_DEPTH: 48 <6>[ 0.142602] ... MAX_LOCKDEP_KEYS: 8192 <6>[ 0.142606] ... CLASSHASH_SIZE: 4096 <6>[ 0.142610] ... MAX_LOCKDEP_ENTRIES: 524288 <6>[ 0.142614] ... MAX_LOCKDEP_CHAINS: 524288 <6>[ 0.142618] ... CHAINHASH_SIZE: 262144 <6>[ 0.142622] memory used by lock dependency info: 54145 kB <6>[ 0.142627] memory used for stack traces: 4224 kB <6>[ 0.142631] per task-struct memory footprint: 1920 bytes <6>[ 0.142700] ACPI: Core revision 20250807 <6>[ 0.143697] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 0.143755] APIC: Switch to symmetric I/O mode setup <6>[ 0.143761] DMAR: Host address width 42 <6>[ 0.143765] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 0.143807] DMAR: dmar0: reg_base_addr fc800000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0ef5e <6>[ 0.143815] DMAR: DRHD base: 0x000000fc801000 flags: 0x1 <6>[ 0.143834] DMAR: dmar1: reg_base_addr fc801000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0efde <6>[ 0.143842] DMAR: SATC flags: 0x1 <6>[ 0.143853] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc801000 IOMMU 1 <6>[ 0.143859] DMAR-IR: HPET id 0 under DRHD base 0xfc801000 <6>[ 0.143863] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 0.145552] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 0.149975] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 0.149996] Calibrating delay loop (skipped), value calculated using timer frequency.. 6758.40 BogoMIPS (lpj=3379200) <6>[ 0.150064] CPU0: Thermal monitoring enabled (TM1) <6>[ 0.150070] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 0.150276] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 0.150280] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 0.150288] process: using mwait in idle threads <6>[ 0.150296] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto <6>[ 0.150309] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 0.150316] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 0.150321] VMSCAPE: Mitigation: IBPB before exit to userspace <6>[ 0.150326] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 0.150334] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 0.150352] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 0.150358] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 0.150363] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 0.150369] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 0.150375] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 0.150381] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' <6>[ 0.150388] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 0.150394] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 0.150399] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 0.150404] x86/fpu: xstate_offset[12]: 856, xstate_sizes[12]: 24 <6>[ 0.150409] x86/fpu: Enabled xstate features 0x1a07, context size is 880 bytes, using 'compacted' format. <6>[ 0.150990] Freeing SMP alternatives memory: 56K <6>[ 0.150990] pid_max: default: 32768 minimum: 301 <6>[ 0.150990] landlock: Up and running. <6>[ 0.150990] Yama: becoming mindful. <6>[ 0.150990] AppArmor: AppArmor initialized <6>[ 0.150990] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.150990] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.150990] Running RCU synchronous self tests <6>[ 0.150990] Running RCU synchronous self tests <6>[ 0.150990] smpboot: CPU0: Intel(R) Core(TM) Ultra 7 1003H (family: 0x6, model: 0xaa, stepping: 0x4) <6>[ 0.150990] Performance Events: XSAVE Architectural LBR, PEBS fmt5+-baseline, AnyThread deprecated, Meteorlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 0.151221] core: cpu_core PMU driver: <6>[ 0.151229] ... version: 5 <6>[ 0.151233] ... bit width: 48 <6>[ 0.151237] ... generic counters: 8 <6>[ 0.151241] ... generic bitmap: 00000000000000ff <6>[ 0.151246] ... fixed-purpose counters: 4 <6>[ 0.151249] ... fixed-purpose bitmap: 000000000000000f <6>[ 0.151254] ... value mask: 0000ffffffffffff <6>[ 0.151258] ... max period: 00007fffffffffff <6>[ 0.151263] ... global_ctrl mask: 0001000f000000ff <6>[ 0.151456] signal: max sigframe size: 3632 <6>[ 0.151487] Estimated ratio of average max frequency by base frequency (times 1024): 1445 <6>[ 0.151637] rcu: Hierarchical SRCU implementation. <6>[ 0.151642] rcu: Max phase no-delay instances is 400. <6>[ 0.151821] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level <6>[ 0.154557] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 0.155490] smp: Bringing up secondary CPUs ... <6>[ 0.155926] smpboot: x86: Booting SMP configuration: <6>[ 0.155935] .... node #0, CPUs: #1 #3 #6 #8 #10 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 <6>[ 0.010066] core: cpu_atom PMU driver: <6>[ 0.010066] ... version: 5 <6>[ 0.010066] ... bit width: 48 <6>[ 0.010066] ... generic counters: 8 <6>[ 0.010066] ... generic bitmap: 00000000000000ff <6>[ 0.010066] ... fixed-purpose counters: 3 <6>[ 0.010066] ... fixed-purpose bitmap: 0000000000000007 <6>[ 0.010066] ... value mask: 0000ffffffffffff <6>[ 0.010066] ... max period: 00007fffffffffff <6>[ 0.010066] ... global_ctrl mask: 00000007000000ff <5>[ 0.170330] #2 #4 #5 #7 #9 #11 <6>[ 0.177079] smp: Brought up 1 node, 22 CPUs <6>[ 0.177089] smpboot: Total of 22 processors activated (148684.80 BogoMIPS) <6>[ 0.180166] Memory: 32229528K/33040228K available (25578K kernel code, 5617K rwdata, 9656K rodata, 5720K init, 68168K bss, 780060K reserved, 0K cma-reserved) <6>[ 0.184226] devtmpfs: initialized <6>[ 0.184367] x86/mm: Memory block size: 128MB <6>[ 0.209709] ACPI: PM: Registering ACPI NVS region [mem 0x63db2000-0x63ed6fff] (1200128 bytes) <6>[ 0.210584] Running RCU synchronous self tests <6>[ 0.210604] Running RCU synchronous self tests <6>[ 0.210620] Running RCU Tasks wait API self tests <6>[ 0.210620] Running RCU Tasks Rude wait API self tests <6>[ 0.210620] Running RCU Tasks Trace wait API self tests <6>[ 0.224015] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.224225] posixtimers hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 0.224508] futex hash table entries: 8192 (1048576 bytes on 1 NUMA nodes, total 1024 KiB, linear). <6>[ 0.225836] PM: RTC time: 02:04:37, date: 2026-01-31 <6>[ 0.226724] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.228013] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.228428] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.228828] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.228890] audit: initializing netlink subsys (disabled) <5>[ 0.229031] audit: type=2000 audit(1769825077.079:1): state=initialized audit_enabled=0 res=1 <6>[ 0.229828] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.229830] thermal_sys: Registered thermal governor 'bang_bang' <6>[ 0.229837] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.229842] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.229847] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.229887] cpuidle: using governor ladder <6>[ 0.229887] cpuidle: using governor menu <6>[ 0.230101] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 0.230623] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 0.230653] PCI: Using configuration type 1 for base access <6>[ 0.231099] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.232033] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.232040] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 0.232046] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.232052] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.235557] raid6: skipped pq benchmark and selected avx2x4 <6>[ 0.235566] raid6: using avx2x2 recovery algorithm <6>[ 0.236199] fbcon: Taking over console <6>[ 0.236397] ACPI: Added _OSI(Module Device) <6>[ 0.236402] ACPI: Added _OSI(Processor Device) <6>[ 0.236406] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 0.243000] Callback from call_rcu_tasks_trace() invoked. <6>[ 0.865186] ACPI: 28 ACPI AML tables successfully acquired and loaded <6>[ 0.882791] ACPI: EC: EC started <6>[ 0.882802] ACPI: EC: interrupt blocked <6>[ 0.885540] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 0.885545] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 0.965997] Callback from call_rcu_tasks() invoked. <6>[ 1.182789] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.182807] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.259261] ACPI: Interpreter enabled <6>[ 1.259394] ACPI: PM: (supports S0 S4 S5) <6>[ 1.259399] ACPI: Using IOAPIC for interrupt routing <6>[ 1.265819] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 1.265827] PCI: Ignoring E820 reservations for host bridge windows <6>[ 1.294607] ACPI: Enabled 10 GPEs in block 00 to 7F <6>[ 1.294638] ACPI: Enabled 8 GPEs in block 80 to DF <6>[ 1.384309] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 1.753536] ACPI: \_SB_.PC00.RP01.PXP_: New power resource <6>[ 1.786933] ACPI: \_SB_.PC00.RP06.PXP_: New power resource <6>[ 1.800973] ACPI: \_SB_.PC00.RP07.PXP_: New power resource <6>[ 1.827327] ACPI: \_SB_.PC00.RP09.PXP_: New power resource <6>[ 1.839409] ACPI: \_SB_.PC00.RP10.PXP_: New power resource <6>[ 1.851965] ACPI: \_SB_.PC00.RP11.PXP_: New power resource <6>[ 1.868289] ACPI: \_SB_.PC00.RP12.PXP_: New power resource <6>[ 2.101378] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 2.101744] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 2.102080] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 2.227415] ACPI: \_TZ_.FN00: New power resource <6>[ 2.228806] ACPI: \_TZ_.FN01: New power resource <6>[ 2.229863] ACPI: \_TZ_.FN02: New power resource <6>[ 2.230937] ACPI: \_TZ_.FN03: New power resource <6>[ 2.232388] ACPI: \_TZ_.FN04: New power resource <6>[ 2.238421] ACPI: \PIN_: New power resource <6>[ 2.243938] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 2.243969] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] <6>[ 2.248049] acpi PNP0A08:00: _OSC: platform does not support [AER] <6>[ 2.256203] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME PCIeCapability LTR DPC] <6>[ 2.277801] PCI host bridge to bus 0000:00 <6>[ 2.277863] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 2.277880] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 2.277894] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 2.277911] pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff window] <6>[ 2.277926] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x3ffbfffffff window] <6>[ 2.277944] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 2.295573] pci 0000:00:00.0: [8086:7d01] type 00 class 0x060000 conventional PCI endpoint <6>[ 2.296671] pci 0000:00:02.0: [8086:7d55] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint <6>[ 2.296719] pci 0000:00:02.0: BAR 0 [mem 0x5018000000-0x5018ffffff 64bit pref] <6>[ 2.296735] pci 0000:00:02.0: BAR 2 [mem 0x4000000000-0x400fffffff 64bit pref] <6>[ 2.296789] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics <6>[ 2.296804] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 2.296866] pci 0000:00:02.0: PME# supported from D0 D3hot <6>[ 2.296954] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x00ffffff 64bit pref] <6>[ 2.296967] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x06ffffff 64bit pref]: contains BAR 0 for 7 VFs <6>[ 2.299829] pci 0000:00:04.0: [8086:7d03] type 00 class 0x118000 conventional PCI endpoint <6>[ 2.299884] pci 0000:00:04.0: BAR 0 [mem 0x501a280000-0x501a29ffff 64bit] <6>[ 2.302678] pci 0000:00:05.0: [8086:7d19] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint <6>[ 2.302719] pci 0000:00:05.0: BAR 0 [mem 0x5019000000-0x5019ffffff 64bit] <6>[ 2.302738] pci 0000:00:05.0: enabling Extended Tags <6>[ 2.304476] pci 0000:00:06.0: [8086:7ecb] type 01 class 0x060400 PCIe Root Port <6>[ 2.304518] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 2.304534] pci 0000:00:06.0: bridge window [mem 0x8c000000-0x8c0fffff] <6>[ 2.304685] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold <6>[ 2.304788] pci 0000:00:06.0: PTM enabled (root), 4ns granularity <6>[ 2.315002] pci 0000:00:07.0: [8086:7ec6] type 01 class 0x060400 PCIe Root Port <6>[ 2.315044] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 2.315059] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff] <6>[ 2.315087] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 2.315205] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 2.315287] pci 0000:00:07.0: PTM enabled (root), 4ns granularity <6>[ 2.323694] pci 0000:00:07.3: [8086:7ec7] type 01 class 0x060400 PCIe Root Port <6>[ 2.323738] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 2.323754] pci 0000:00:07.3: bridge window [mem 0x80000000-0x85ffffff] <6>[ 2.323775] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 2.323891] pci 0000:00:07.3: PME# supported from D0 D3hot D3cold <6>[ 2.323972] pci 0000:00:07.3: PTM enabled (root), 4ns granularity <6>[ 2.332656] pci 0000:00:08.0: [8086:7e4c] type 00 class 0x088000 conventional PCI endpoint <6>[ 2.332716] pci 0000:00:08.0: BAR 0 [mem 0x501a2e3000-0x501a2e3fff 64bit] <6>[ 2.333534] pci 0000:00:0a.0: [8086:7d0d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint <6>[ 2.333573] pci 0000:00:0a.0: BAR 0 [mem 0x501a240000-0x501a27ffff 64bit] <6>[ 2.333592] pci 0000:00:0a.0: enabling Extended Tags <6>[ 2.334417] pci 0000:00:0b.0: [8086:7d1d] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint <6>[ 2.334459] pci 0000:00:0b.0: BAR 0 [mem 0x5010000000-0x5017ffffff 64bit] <6>[ 2.334473] pci 0000:00:0b.0: BAR 4 [mem 0x501a2e2000-0x501a2e2fff 64bit] <6>[ 2.335332] pci 0000:00:0d.0: [8086:7ec0] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.335385] pci 0000:00:0d.0: BAR 0 [mem 0x501a2c0000-0x501a2cffff 64bit] <6>[ 2.335511] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 2.339032] pci 0000:00:0d.3: [8086:7ec3] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.339118] pci 0000:00:0d.3: BAR 0 [mem 0x501a200000-0x501a23ffff 64bit] <6>[ 2.339132] pci 0000:00:0d.3: BAR 2 [mem 0x501a2e1000-0x501a2e1fff 64bit] <6>[ 2.339200] pci 0000:00:0d.3: supports D1 D2 <6>[ 2.339208] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.341866] pci 0000:00:12.0: [8086:7e45] type 00 class 0x070000 conventional PCI endpoint <6>[ 2.341916] pci 0000:00:12.0: BAR 0 [mem 0x501a2b0000-0x501a2bffff 64bit] <6>[ 2.341989] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 2.347391] pci 0000:00:14.0: [8086:7e7d] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.347444] pci 0000:00:14.0: BAR 0 [mem 0x501a2a0000-0x501a2affff 64bit] <6>[ 2.347516] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 2.351817] pci 0000:00:14.2: [8086:7e7f] type 00 class 0x050000 conventional PCI endpoint <6>[ 2.351877] pci 0000:00:14.2: BAR 0 [mem 0x501a2d4000-0x501a2d7fff 64bit] <6>[ 2.351892] pci 0000:00:14.2: BAR 2 [mem 0x501a2e0000-0x501a2e0fff 64bit] <6>[ 2.352377] pci 0000:00:15.0: [8086:7e78] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.352465] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.365361] pci 0000:00:15.1: [8086:7e79] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.365424] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.378340] pci 0000:00:15.2: [8086:7e7a] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.378405] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.391529] pci 0000:00:15.3: [8086:7e7b] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.391595] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.404407] pci 0000:00:16.0: [8086:7e70] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.404470] pci 0000:00:16.0: BAR 0 [mem 0x501a2db000-0x501a2dbfff 64bit] <6>[ 2.404549] pci 0000:00:16.0: PME# supported from D3hot <6>[ 2.409516] pci 0000:00:16.3: [8086:7e73] type 00 class 0x070002 conventional PCI endpoint <6>[ 2.409569] pci 0000:00:16.3: BAR 0 [io 0x3020-0x3027] <6>[ 2.409580] pci 0000:00:16.3: BAR 1 [mem 0x8c121000-0x8c121fff] <6>[ 2.409986] pci 0000:00:19.0: [8086:7e50] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.410041] pci 0000:00:19.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.421782] pci 0000:00:19.1: [8086:7e51] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.421856] pci 0000:00:19.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.434464] pci 0000:00:1f.0: [8086:7e02] type 00 class 0x060100 conventional PCI endpoint <6>[ 2.437039] pci 0000:00:1f.3: [8086:7e28] type 00 class 0x040100 conventional PCI endpoint <6>[ 2.437163] pci 0000:00:1f.3: BAR 0 [mem 0x501a2d0000-0x501a2d3fff 64bit] <6>[ 2.437184] pci 0000:00:1f.3: BAR 4 [mem 0x501a000000-0x501a1fffff 64bit] <6>[ 2.437315] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 2.438173] pci 0000:00:1f.4: [8086:7e22] type 00 class 0x0c0500 conventional PCI endpoint <6>[ 2.438234] pci 0000:00:1f.4: BAR 0 [mem 0x501a2d8000-0x501a2d80ff 64bit] <6>[ 2.438251] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] <6>[ 2.440614] pci 0000:00:1f.5: [8086:7e23] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.440728] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] <6>[ 2.441141] pci 0000:00:1f.6: [8086:550a] type 00 class 0x020000 conventional PCI endpoint <6>[ 2.441230] pci 0000:00:1f.6: BAR 0 [mem 0x8c100000-0x8c11ffff] <6>[ 2.441328] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold <6>[ 2.444188] pci 0000:01:00.0: [15b7:501e] type 00 class 0x010802 PCIe Endpoint <6>[ 2.444355] pci 0000:01:00.0: BAR 0 [mem 0x8c000000-0x8c003fff 64bit] <6>[ 2.447218] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 2.447530] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 2.447849] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 2.868861] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1) <6>[ 2.868879] Low-power S0 idle used by default for system suspend <6>[ 2.984715] ACPI: EC: interrupt unblocked <6>[ 2.984732] ACPI: EC: event unblocked <6>[ 2.984992] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 2.984992] ACPI: EC: GPE=0x6e <6>[ 2.984992] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 2.984992] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 2.987076] iommu: Default domain type: Translated <6>[ 2.987076] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 2.990395] SCSI subsystem initialized <7>[ 2.991092] libata version 3.00 loaded. <6>[ 2.991338] ACPI: bus type USB registered <6>[ 2.991338] usbcore: registered new interface driver usbfs <6>[ 2.991338] usbcore: registered new interface driver hub <6>[ 2.991391] usbcore: registered new device driver usb <6>[ 2.991670] pps_core: LinuxPPS API ver. 1 registered <6>[ 2.991679] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 2.991723] PTP clock support registered <6>[ 2.993091] EDAC MC: Ver: 3.0.0 <6>[ 2.994028] efivars: Registered efivars operations <6>[ 2.996049] NetLabel: Initializing <6>[ 2.996059] NetLabel: domain hash size = 128 <6>[ 2.996068] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO <6>[ 2.996199] NetLabel: unlabeled traffic allowed by default <6>[ 2.996231] mctp: management component transport protocol core <6>[ 2.996241] NET: Registered PF_MCTP protocol family <6>[ 2.996330] PCI: Using ACPI for IRQ routing <7>[ 3.014129] PCI: pci_cache_line_size set to 64 bytes <6>[ 3.014319] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window <7>[ 3.014522] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 3.014536] e820: reserve RAM buffer [mem 0x5bd41000-0x5bffffff] <7>[ 3.014542] e820: reserve RAM buffer [mem 0x5bda2000-0x5bffffff] <7>[ 3.014546] e820: reserve RAM buffer [mem 0x60a3a000-0x63ffffff] <6>[ 3.016043] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 3.016061] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 3.016071] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 3.016096] vgaarb: loaded <6>[ 3.024991] clocksource: Switched to clocksource tsc-early <5>[ 3.033802] VFS: Disk quotas dquot_6.6.0 <6>[ 3.033849] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 3.035871] AppArmor: AppArmor Filesystem Enabled <6>[ 3.036210] pnp: PnP ACPI init <6>[ 3.037829] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 3.037849] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 3.038837] system 00:01: [io 0x1854-0x1857] has been reserved <6>[ 3.041341] system 00:03: [io 0x06a4] has been reserved <6>[ 3.041359] system 00:03: [io 0x06a0] has been reserved <4>[ 3.079189] pnp 00:04: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] <4>[ 3.079213] pnp 00:04: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] <6>[ 3.079467] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 3.079486] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 3.079508] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved <6>[ 3.079526] system 00:04: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 3.079545] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 3.079561] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 3.089648] system 00:05: [io 0x2000-0x20fe] has been reserved <4>[ 3.092227] pnp 00:07: disabling [mem 0x00000000-0x0009cfff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] <6>[ 3.097032] pnp: PnP ACPI: found 8 devices <6>[ 3.115329] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 3.115708] NET: Registered PF_INET protocol family <6>[ 3.116018] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 3.119960] tcp_listen_portaddr_hash hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 3.120198] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 3.120465] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 3.121787] TCP bind hash table entries: 65536 (order: 12, 9437184 bytes, vmalloc hugepage) <6>[ 3.123354] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 3.124181] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 3.125239] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 3.126404] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 3.126492] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2 <6>[ 3.126544] pci 0000:00:02.0: VF BAR 0 [mem 0x501b000000-0x5021ffffff 64bit pref]: assigned <6>[ 3.126564] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned <6>[ 3.126575] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff]: assigned <6>[ 3.126587] pci 0000:00:15.0: BAR 0 [mem 0x501a2d9000-0x501a2d9fff 64bit]: assigned <6>[ 3.126610] pci 0000:00:15.1: BAR 0 [mem 0x501a2da000-0x501a2dafff 64bit]: assigned <6>[ 3.126632] pci 0000:00:15.2: BAR 0 [mem 0x501a2dc000-0x501a2dcfff 64bit]: assigned <6>[ 3.126654] pci 0000:00:15.3: BAR 0 [mem 0x501a2dd000-0x501a2ddfff 64bit]: assigned <6>[ 3.126676] pci 0000:00:19.0: BAR 0 [mem 0x501a2de000-0x501a2defff 64bit]: assigned <6>[ 3.126698] pci 0000:00:19.1: BAR 0 [mem 0x501a2df000-0x501a2dffff 64bit]: assigned <6>[ 3.126720] pci 0000:00:1f.5: BAR 0 [mem 0x8c120000-0x8c120fff]: assigned <6>[ 3.126753] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 3.126767] pci 0000:00:06.0: bridge window [mem 0x8c000000-0x8c0fffff] <6>[ 3.126785] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 3.126810] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 3.126823] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff] <6>[ 3.126838] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 3.126855] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 3.126864] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff] <6>[ 3.126876] pci 0000:00:07.3: bridge window [mem 0x80000000-0x85ffffff] <6>[ 3.126889] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 3.126906] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 3.126916] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 3.126925] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 3.126936] pci_bus 0000:00: resource 7 [mem 0x80000000-0xbfffffff window] <6>[ 3.126946] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x3ffbfffffff window] <6>[ 3.126959] pci_bus 0000:01: resource 1 [mem 0x8c000000-0x8c0fffff] <6>[ 3.126969] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] <6>[ 3.126978] pci_bus 0000:02: resource 1 [mem 0x86000000-0x8bffffff] <6>[ 3.126987] pci_bus 0000:02: resource 2 [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 3.127000] pci_bus 0000:2c: resource 0 [io 0x5000-0x5fff] <6>[ 3.127008] pci_bus 0000:2c: resource 1 [mem 0x80000000-0x85ffffff] <6>[ 3.127018] pci_bus 0000:2c: resource 2 [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 3.129042] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 3.132076] PCI: CLS 0 bytes, default 64 <6>[ 3.132224] DMAR: No RMRR found <6>[ 3.132240] DMAR: No ATSR found <6>[ 3.132246] DMAR: dmar0: Using Queued invalidation <6>[ 3.132258] DMAR: dmar1: Using Queued invalidation <6>[ 3.133567] pci 0000:00:02.0: Adding to iommu group 0 <6>[ 3.135515] pci 0000:00:00.0: Adding to iommu group 1 <6>[ 3.135620] pci 0000:00:04.0: Adding to iommu group 2 <6>[ 3.135726] pci 0000:00:05.0: Adding to iommu group 3 <6>[ 3.135845] pci 0000:00:06.0: Adding to iommu group 4 <6>[ 3.135972] pci 0000:00:07.0: Adding to iommu group 5 <6>[ 3.136112] pci 0000:00:07.3: Adding to iommu group 6 <6>[ 3.136212] pci 0000:00:08.0: Adding to iommu group 7 <6>[ 3.136302] pci 0000:00:0a.0: Adding to iommu group 8 <6>[ 3.136399] pci 0000:00:0b.0: Adding to iommu group 9 <6>[ 3.136528] pci 0000:00:0d.0: Adding to iommu group 10 <6>[ 3.136599] pci 0000:00:0d.3: Adding to iommu group 10 <6>[ 3.136702] pci 0000:00:12.0: Adding to iommu group 11 <6>[ 3.136820] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 3.136887] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 3.137034] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 3.137106] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 3.137178] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 3.137247] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 3.137368] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 3.137439] pci 0000:00:16.3: Adding to iommu group 14 <6>[ 3.137560] pci 0000:00:19.0: Adding to iommu group 15 <6>[ 3.137632] pci 0000:00:19.1: Adding to iommu group 15 <6>[ 3.137792] pci 0000:00:1f.0: Adding to iommu group 16 <6>[ 3.137863] pci 0000:00:1f.3: Adding to iommu group 16 <6>[ 3.137939] pci 0000:00:1f.4: Adding to iommu group 16 <6>[ 3.138014] pci 0000:00:1f.5: Adding to iommu group 16 <6>[ 3.138096] pci 0000:00:1f.6: Adding to iommu group 16 <6>[ 3.138220] pci 0000:01:00.0: Adding to iommu group 17 <6>[ 3.162175] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 3.162189] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 3.162199] software IO TLB: mapped [mem 0x0000000056de6000-0x000000005ade6000] (64MB) <6>[ 3.166002] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 3.166329] clocksource: Switched to clocksource tsc <6>[ 3.166510] platform rtc_cmos: registered platform RTC device (no PNP device found) <5>[ 3.177385] Initialise system trusted keyrings <5>[ 3.177477] Key type blacklist registered <6>[ 3.177741] workingset: timestamp_bits=36 max_order=23 bucket_order=0 <6>[ 3.190180] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 3.190312] ntfs3: Enabled Linux POSIX ACLs support <6>[ 3.190321] ntfs3: Read-only LZX/Xpress compression included <5>[ 3.191831] integrity: Platform Keyring initialized <5>[ 3.191859] integrity: Machine keyring initialized <6>[ 3.199755] xor: automatically using best checksumming function avx <5>[ 3.199769] Key type asymmetric registered <5>[ 3.199784] Asymmetric key parser 'x509' registered <6>[ 3.199936] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) <6>[ 3.200282] io scheduler mq-deadline registered <6>[ 3.204028] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 3.206470] pcieport 0000:00:06.0: PME: Signaling with IRQ 122 <6>[ 3.208550] pcieport 0000:00:07.0: PME: Signaling with IRQ 123 <6>[ 3.210354] pcieport 0000:00:07.3: PME: Signaling with IRQ 124 <6>[ 3.212782] ACPI: AC: AC Adapter [ADP1] (on-line) <6>[ 3.213228] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 3.213634] ACPI: button: Lid Switch [LID0] <6>[ 3.214011] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 3.214254] ACPI: button: Sleep Button [SLPB] <6>[ 3.214561] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 3.214788] ACPI: button: Power Button [PWRB] <6>[ 3.322848] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 3.322863] ACPI: thermal: Thermal Zone [TZ00] (37 C) <6>[ 3.324582] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 3.324604] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled <6>[ 3.326394] ACPI: battery: Slot [BAT0] (battery present) <6>[ 3.348477] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 3.368781] serial 0000:00:12.0: enabling device (0000 -> 0002) <6>[ 3.371588] serial 0000:00:16.3: enabling device (0001 -> 0003) <6>[ 3.395410] 0000:00:16.3: ttyS4 at I/O 0x3020 (irq = 19, base_baud = 115200) is a 16550A <5>[ 3.397561] hpet_acpi_add: no address or irqs in _CRS <6>[ 3.397684] Linux agpgart interface v0.103 <6>[ 3.425725] ACPI: bus type drm_connector registered <7>[ 3.427353] initcall simpledrm_platform_driver_init blacklisted <6>[ 3.458623] loop: module loaded <6>[ 3.508421] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 3.637835] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 3.715648] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 3.850141] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <6>[ 3.978319] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002) <6>[ 4.121133] intel-lpss 0000:00:19.1: enabling device (0000 -> 0002) <5>[ 4.245843] Key type psk registered <6>[ 4.248532] nvme 0000:01:00.0: platform quirk: setting simple suspend <6>[ 4.249368] nvme nvme0: pci function 0000:01:00.0 <6>[ 4.249923] tun: Universal TUN/TAP device driver, 1.6 <6>[ 4.251245] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 4.251373] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 4.253432] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 4.256585] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 4.256614] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 4.256639] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 4.257087] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.19 <6>[ 4.257113] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.257126] usb usb1: Product: xHCI Host Controller <6>[ 4.257135] usb usb1: Manufacturer: Linux 6.19.0-rc7-CI_DRM_17911-gfeea7da320aa+ xhci-hcd <6>[ 4.257148] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 4.258307] hub 1-0:1.0: USB hub found <6>[ 4.258431] hub 1-0:1.0: 1 port detected <6>[ 4.262741] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.19 <6>[ 4.262759] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.262771] usb usb2: Product: xHCI Host Controller <6>[ 4.262780] usb usb2: Manufacturer: Linux 6.19.0-rc7-CI_DRM_17911-gfeea7da320aa+ xhci-hcd <6>[ 4.262793] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 4.264153] hub 2-0:1.0: USB hub found <6>[ 4.264224] hub 2-0:1.0: 4 ports detected <6>[ 4.297968] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 4.298006] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 4.299900] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 4.301962] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 4.301987] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 4.302014] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 4.302257] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.19 <6>[ 4.302272] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.302284] usb usb3: Product: xHCI Host Controller <6>[ 4.302293] usb usb3: Manufacturer: Linux 6.19.0-rc7-CI_DRM_17911-gfeea7da320aa+ xhci-hcd <6>[ 4.302306] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 4.303195] hub 3-0:1.0: USB hub found <6>[ 4.303249] hub 3-0:1.0: 12 ports detected <6>[ 4.324136] nvme nvme0: allocated 64 MiB host memory buffer (1 segment). <6>[ 4.345019] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.19 <6>[ 4.345038] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.345051] usb usb4: Product: xHCI Host Controller <6>[ 4.345059] usb usb4: Manufacturer: Linux 6.19.0-rc7-CI_DRM_17911-gfeea7da320aa+ xhci-hcd <6>[ 4.345085] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 4.345931] hub 4-0:1.0: USB hub found <6>[ 4.345979] hub 4-0:1.0: 2 ports detected <6>[ 4.353093] usbcore: registered new interface driver usb-storage <6>[ 4.353322] usbcore: registered new interface driver usbserial_generic <6>[ 4.353457] usbserial: USB Serial support registered for generic <6>[ 4.353552] usbcore: registered new interface driver ftdi_sio <6>[ 4.353600] usbserial: USB Serial support registered for FTDI USB Serial Device <6>[ 4.353687] usbcore: registered new interface driver pl2303 <6>[ 4.353736] usbserial: USB Serial support registered for pl2303 <6>[ 4.353898] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 4.353910] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <6>[ 4.362592] nvme nvme0: 16/0/0 default/read/poll queues <6>[ 4.378736] nvme0n1: p1 p2 <3>[ 5.054960] i8042: Can't read CTR while initializing i8042 <3>[ 5.054982] i8042 i8042: probe with driver i8042 failed with error -5 <6>[ 5.055746] mousedev: PS/2 mouse device common for all mice <6>[ 5.057160] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 5.058968] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 5.059156] rtc_cmos rtc_cmos: setting system clock to 2026-01-31T02:04:42 UTC (1769825082) <6>[ 5.059362] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 5.059422] i2c_dev: i2c /dev entries driver <6>[ 5.064095] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 5.064112] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 5.064126] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. <6>[ 5.064174] device-mapper: uevent: version 1.0.3 <6>[ 5.064604] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev <6>[ 5.064626] intel_pstate: Intel P-state driver initializing <6>[ 5.076016] intel_pstate: HWP enabled <6>[ 5.076024] sdhci: Secure Digital Host Controller Interface driver <6>[ 5.076030] sdhci: Copyright(c) Pierre Ossman <6>[ 5.076173] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 5.079518] drop_monitor: Initializing network drop monitor service <6>[ 5.079751] NET: Registered PF_INET6 protocol family <6>[ 5.081003] Segment Routing with IPv6 <6>[ 5.081040] In-situ OAM (IOAM) with IPv6 <6>[ 5.081099] NET: Registered PF_PACKET protocol family <5>[ 5.081259] Key type dns_resolver registered <4>[ 5.092364] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 5.093619] microcode: Current revision: 0x0000001c <6>[ 5.095278] IPI shorthand broadcast: enabled <6>[ 5.109963] sched_clock: Marking stable (5100000692, 9066986)->(5178950381, -69882703) <6>[ 5.111025] registered taskstats version 1 <5>[ 5.113717] Loading compiled-in X.509 certificates <6>[ 5.162774] Demotion targets for Node 0: null <6>[ 5.163253] kmemleak: Kernel memory leak detector initialized (mem pool available: 14930) <6>[ 5.163265] kmemleak: Automatic memory scanning thread started <5>[ 5.163568] Key type .fscrypt registered <5>[ 5.163573] Key type fscrypt-provisioning registered <6>[ 5.166827] Btrfs loaded, zoned=yes, fsverity=yes <5>[ 5.166930] Key type trusted registered <5>[ 5.172362] Key type encrypted registered <6>[ 5.172369] AppArmor: AppArmor sha256 policy hashing enabled <5>[ 5.172391] Loading compiled-in module X.509 certificates <5>[ 5.173065] Loaded X.509 cert 'Build time autogenerated kernel key: cd33045fac5ad15d8b5f90c70e836e004eeb4c2e' <6>[ 5.173083] ima: Allocated hash algorithm: sha256 <6>[ 5.214356] ima: No architecture policies found <6>[ 5.214517] evm: Initialising EVM extended attributes: <6>[ 5.214524] evm: security.selinux <6>[ 5.214529] evm: security.SMACK64 <6>[ 5.214533] evm: security.SMACK64EXEC <6>[ 5.214538] evm: security.SMACK64TRANSMUTE <6>[ 5.214544] evm: security.SMACK64MMAP <6>[ 5.214548] evm: security.apparmor <6>[ 5.214553] evm: security.ima <6>[ 5.214558] evm: security.capability <6>[ 5.214562] evm: HMAC attrs: 0x1 <6>[ 5.217393] PM: Magic number: 10:22:57 <6>[ 5.217410] nvme-subsystem nvme-subsys0: hash matches <6>[ 5.217538] acpi IIC1002:00: hash matches <6>[ 5.217590] memory memory89: hash matches <6>[ 5.217655] netconsole: network logging started <6>[ 5.218374] RAS: Correctable Errors collector initialized. <6>[ 5.218548] clk: Disabling unused clocks <6>[ 5.218559] PM: genpd: Disabling unused power domains <4>[ 5.219807] check access for rdinit=/init failed: -2, ignoring <6>[ 5.219814] md: Waiting for all devices to be available before autodetect <6>[ 5.219819] md: If you don't use raid, use raid=noautodetect <6>[ 5.219824] md: Autodetecting RAID arrays. <6>[ 5.219871] md: autorun ... <6>[ 5.219874] md: ... autorun DONE. <6>[ 5.271436] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd <6>[ 5.285524] usb 4-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 <6>[ 5.285578] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 <6>[ 5.285602] usb 4-1: Product: USB 10/100/1000 LAN <6>[ 5.285618] usb 4-1: Manufacturer: Realtek <6>[ 5.285633] usb 4-1: SerialNumber: 000001 <6>[ 5.295704] EXT4-fs (nvme0n1p2): mounted filesystem 50f9c5b5-0801-45a5-b2f8-ae8d17396a16 ro with ordered data mode. Quota mode: none. <6>[ 5.295777] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 5.296698] devtmpfs: mounted <6>[ 5.314236] Freeing unused decrypted memory: 2036K <6>[ 5.315489] Freeing unused kernel image (initmem) memory: 5720K <6>[ 5.315518] Write protecting the kernel read-only data: 36864k <6>[ 5.316796] Freeing unused kernel image (text/rodata gap) memory: 1044K <6>[ 5.317113] Freeing unused kernel image (rodata/data gap) memory: 584K <6>[ 5.323156] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 5.340148] Run /sbin/init as init process <7>[ 5.340154] with arguments: <7>[ 5.340155] /sbin/init <7>[ 5.340156] with environment: <7>[ 5.340157] HOME=/ <7>[ 5.340158] TERM=linux <7>[ 5.423140] systemd[1]: Inserted module 'autofs4' <7>[ 5.460514] systemd[1]: systemd 255.4-1ubuntu8.12 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <7>[ 5.460545] systemd[1]: Detected architecture x86-64. <7>[ 5.462176] systemd[1]: Hostname set to . <7>[ 5.755410] systemd[1]: Queued start job for default target graphical.target. <7>[ 5.798639] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. <7>[ 5.800747] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. <7>[ 5.802469] systemd[1]: Created slice user.slice - User and Session Slice. <7>[ 5.802754] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. <7>[ 5.803496] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. <7>[ 5.803628] systemd[1]: Expecting device dev-disk-by\x2duuid-BC00\x2dEEBB.device - /dev/disk/by-uuid/BC00-EEBB... <7>[ 5.803726] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. <7>[ 5.803824] systemd[1]: Reached target slices.target - Slice Units. <7>[ 5.803901] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. <7>[ 5.803975] systemd[1]: Reached target snapd.mounts.target - Mounted snaps. <7>[ 5.804053] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. <7>[ 5.804339] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. <7>[ 5.804762] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. <7>[ 5.805095] systemd[1]: Listening on multipathd.socket - multipathd control socket. <7>[ 5.805465] systemd[1]: Listening on syslog.socket - Syslog Socket. <7>[ 5.805758] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. <7>[ 5.805997] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. <7>[ 5.806392] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). <7>[ 5.806756] systemd[1]: Listening on systemd-journald.socket - Journal Socket. <7>[ 5.807108] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. <7>[ 5.807325] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 5.807898] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. <7>[ 5.808226] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. <7>[ 5.812293] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... <7>[ 5.815726] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... <7>[ 5.818544] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... <7>[ 5.821761] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... <7>[ 5.829739] systemd[1]: Starting systemd-journald.service - Journal Service... <7>[ 5.832616] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... <7>[ 5.835469] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... <7>[ 5.838690] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... <7>[ 5.841320] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... <7>[ 5.844509] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... <7>[ 5.848527] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... <7>[ 5.851571] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... <7>[ 5.856020] systemd-journald[311]: Collecting audit messages is disabled. <7>[ 5.856198] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... <7>[ 5.861732] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... <7>[ 5.864283] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics... <7>[ 5.864450] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). <7>[ 5.867979] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... <6>[ 5.868947] pstore: Using crash dump compression: deflate <6>[ 5.872099] pstore: Registered efi_pstore as persistent store backend <7>[ 5.872291] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... <7>[ 5.872437] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 5.872500] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 5.875957] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... <7>[ 5.881689] systemd[1]: Started systemd-journald.service - Journal Service. <6>[ 5.886402] fuse: init (API version 7.45) <6>[ 6.022147] EXT4-fs (nvme0n1p2): re-mounted 50f9c5b5-0801-45a5-b2f8-ae8d17396a16 r/w. <6>[ 6.059977] Adding 8388604k swap on /swap.img. Priority:-1 extents:66 across:952238080k SS <7>[ 6.071493] systemd-journald[311]: Received client request to flush runtime journal. <7>[ 6.093289] systemd-journald[311]: /var/log/journal/09bbc4ccef2141a7b5ecf81299acfffb/system.journal: Journal file uses a different sequence number ID, rotating. <7>[ 6.093306] systemd-journald[311]: Rotating system journal. <4>[ 6.801725] nvme nvme0: using unchecked data buffer <6>[ 6.940592] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002) <6>[ 6.945790] input: Intel HID events as /devices/platform/INTC1077:00/input/input3 <6>[ 6.954435] intel-hid INTC1077:00: platform supports 5 button array <6>[ 6.961499] intel_pmc_ssram_telemetry 0000:00:14.2: enabling device (0000 -> 0002) <6>[ 6.969436] input: Intel HID 5 button array as /devices/platform/INTC1077:00/input/input4 <3>[ 7.122907] int3472-tps68470 i2c-INT3472:0d: TPS68470 init error -121 <3>[ 7.123111] int3472-tps68470 i2c-INT3472:0d: probe with driver int3472-tps68470 failed with error -121 <4>[ 7.223733] resource: resource sanity check: requesting [mem 0x00000000fedc0000-0x00000000fedcffff], which spans more than pnp 00:04 [mem 0xfedc0000-0xfedc7fff] <4>[ 7.223760] caller igen6_probe+0x190/0x9ea [igen6_edac] mapping multiple BARs <6>[ 7.227857] ACPI: bus type thunderbolt registered <6>[ 7.234607] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 7.234611] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 7.238442] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode <6>[ 7.239532] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002) <6>[ 7.242181] EDAC MC0: Giving out device to module igen6_edac controller Intel_client_SoC MC#0: DEV 0000:00:00.0 (INTERRUPT) <6>[ 7.256801] pci 0000:00:08.0: Setting to D3hot <5>[ 7.260429] audit: type=1400 audit(1769825084.699:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=572 comm="apparmor_parser" <5>[ 7.260671] audit: type=1400 audit(1769825084.699:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=574 comm="apparmor_parser" <5>[ 7.261065] audit: type=1400 audit(1769825084.699:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=569 comm="apparmor_parser" <5>[ 7.261369] audit: type=1400 audit(1769825084.700:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=573 comm="apparmor_parser" <5>[ 7.261717] audit: type=1400 audit(1769825084.700:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=571 comm="apparmor_parser" <5>[ 7.261893] audit: type=1400 audit(1769825084.700:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=575 comm="apparmor_parser" <6>[ 7.261900] i801_smbus 0000:00:1f.4: SPD Write Disable is set <6>[ 7.262087] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt <5>[ 7.263711] audit: type=1400 audit(1769825084.702:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=576 comm="apparmor_parser" <5>[ 7.265792] audit: type=1400 audit(1769825084.704:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=577 comm="apparmor_parser" <6>[ 7.267590] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_37xx_v0.0.bin, version: 20230726*MTL_CLIENT_SILICON-release*2101*ci_tag_mtl_pv_vpu_rc_20230726_2101*648a666b8b9 <6>[ 7.267596] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS <6>[ 7.267855] idma64 idma64.0: Found Intel integrated DMA 64-bit <6>[ 7.268196] pci 0000:00:05.0: Setting to D3hot <5>[ 7.269366] audit: type=1400 audit(1769825084.708:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=578 comm="apparmor_parser" <5>[ 7.270526] audit: type=1400 audit(1769825084.709:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=579 comm="apparmor_parser" <6>[ 7.278778] EDAC MC1: Giving out device to module igen6_edac controller Intel_client_SoC MC#1: DEV 0000:00:00.0 (INTERRUPT) <6>[ 7.280649] intel_pmc_core INT33A1:00: initialized <6>[ 7.282624] EDAC igen6: v2.5.1 <6>[ 7.296314] idma64 idma64.1: Found Intel integrated DMA 64-bit <6>[ 7.320022] idma64 idma64.2: Found Intel integrated DMA 64-bit <6>[ 7.345108] idma64 idma64.3: Found Intel integrated DMA 64-bit <6>[ 7.447335] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock <6>[ 7.450764] i2c i2c-6: Successfully instantiated SPD at 0x54 <6>[ 7.453102] i2c i2c-6: Successfully instantiated SPD at 0x56 <6>[ 7.476607] usbcore: registered new device driver r8152-cfgselector <6>[ 7.482784] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 7.482789] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 7.482791] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 7.482792] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules <6>[ 7.482793] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 7.509191] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0 <6>[ 7.532777] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88 <6>[ 7.532786] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection <6>[ 7.532902] e1000e 0000:00:1f.6 eth0: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF <6>[ 7.551188] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 7.555371] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.563044] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.653844] r8152-cfgselector 4-1: reset SuperSpeed USB device number 2 using xhci_hcd <6>[ 7.664462] proc_thermal_pci 0000:00:04.0: enabling device (0000 -> 0002) <6>[ 7.670169] intel_rapl_common: Found RAPL domain package <6>[ 7.685007] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.696633] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.773100] intel_rapl_msr: PL4 support detected. <6>[ 7.775010] intel_rapl_common: Found RAPL domain package <6>[ 7.775214] intel_rapl_common: Found RAPL domain core <6>[ 7.775216] intel_rapl_common: Found RAPL domain uncore <6>[ 7.775219] intel_rapl_common: Found RAPL domain psys <6>[ 7.782120] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.792611] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 7.799019] spi-nor spi0.0: supply vcc not found, using dummy regulator <6>[ 7.799458] e1000e 0000:00:1f.6 eno0: renamed from eth0 <6>[ 7.805347] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.822950] r8152 4-1:1.0 eth0: v1.12.13 <6>[ 7.823390] usbcore: registered new interface driver r8152 <6>[ 7.825512] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <5>[ 7.826249] Creating 1 MTD partitions on "0000:00:1f.5": <5>[ 7.826280] 0x000000000000-0x000002000000 : "BIOS" <6>[ 7.830078] hid: raw HID events driver (C) Jiri Kosina <6>[ 7.834750] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.837358] usbcore: registered new interface driver cdc_ether <6>[ 7.839755] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6 <6>[ 7.841469] usbcore: registered new interface driver r8153_ecm <6>[ 7.844544] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.873625] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.878461] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.880152] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.880372] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.882079] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.883632] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.884678] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.885932] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 7.886916] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 7.890850] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.893802] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.896573] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.898544] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.900882] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.902133] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.905589] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.906141] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.909759] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.910235] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 7.913289] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 7.914128] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.918329] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.976556] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.980988] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.985410] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.988432] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.992139] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.995367] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.000519] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.004741] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.007903] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.011374] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.015564] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.018896] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.021946] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.026821] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.030296] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.034058] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.037956] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.041451] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.044407] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.050238] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.076826] r8152 4-1:1.0 enxe2015072f451: renamed from eth0 <4>[ 8.180850] block nvme0n1: No UUID available providing old NGUID <6>[ 8.459306] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.566022] loop0: detected capacity change from 0 to 8 <6>[ 8.717677] Consider using thermal netlink events interface <6>[ 10.773042] r8152 4-1:1.0 enxe2015072f451: carrier on <3>[ 16.457599] ucsi_acpi USBC000:00: error -ETIMEDOUT: PPM init failed <6>[ 18.555314] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 18.558499] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component <7>[ 26.511021] systemd-journald[311]: /var/log/journal/09bbc4ccef2141a7b5ecf81299acfffb/user-1000.journal: Journal file uses a different sequence number ID, rotating. <6>[ 27.482745] /proc/cgroups lists only v1 controllers, use cgroup.controllers of root cgroup for v2 info <7>[ 51.014522] [IGT] i915_module_load: executing <4>[ 51.014577] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <7>[ 51.135578] [IGT] i915_module_load: starting subtest load <4>[ 51.743763] ********************************************************** <4>[ 51.743764] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 51.743764] ** ** <4>[ 51.743765] ** trace_printk() being used. Allocating extra memory. ** <4>[ 51.743766] ** ** <4>[ 51.743767] ** This means that this is a DEBUG kernel and it is ** <4>[ 51.743767] ** unsafe for production use. ** <4>[ 51.743768] ** ** <4>[ 51.743769] ** If you see this message and you are not debugging ** <4>[ 51.743769] ** the kernel, report this immediately to your vendor! ** <4>[ 51.743770] ** ** <4>[ 51.743771] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 51.743771] ********************************************************** <5>[ 51.784081] Setting dangerous option force_probe - tainting kernel <6>[ 51.788698] i915 0000:00:02.0: [drm] Found meteorlake (device ID 7d55) integrated display version 14.00 stepping C0 <7>[ 51.789947] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K <7>[ 51.790225] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:no slpc:yes) <7>[ 51.790401] i915 0000:00:02.0: [drm:intel_pch_detect [i915]] PCH not involved in display, using fake PCH type 1026 for south display <7>[ 51.790571] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7>[ 51.790772] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7>[ 51.790947] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT1: Setting up Standalone Media GT <7>[ 51.791140] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K <7>[ 51.791382] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT1: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes) <7>[ 51.791646] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7>[ 51.791827] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 38400 kHz <7>[ 51.792226] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vdbox enable: 0000, instances: 0000 <7>[ 51.792370] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vebox enable: 0000, instances: 0000 <7>[ 51.792849] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vdbox enable: 0005, instances: 0005 <7>[ 51.792991] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vebox enable: 0001, instances: 0001 <7>[ 51.793480] i915 0000:00:02.0: [drm:ggtt_probe_common [i915]] Using direct GSM access <7>[ 51.793725] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7>[ 51.793858] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 0M <7>[ 51.793988] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M <6>[ 51.794131] i915 0000:00:02.0: [drm] VT-d active for gfx access <6>[ 51.794681] i915 0000:00:02.0: vgaarb: deactivate vga console <6>[ 51.795017] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7>[ 51.795026] i915 0000:00:02.0: [drm:i915_gem_stolen_lmem_setup [i915]] Using direct DSM access <7>[ 51.795260] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000078400947 <7>[ 51.795811] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 131072K, usable: 126976K <7>[ 51.796062] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 31513 MiB [mem 0x00000000-0x7b193dfff], io: n/a <7>[ 51.796225] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(6): stolen-local: 124 MiB [mem 0x00800000-0x083fffff], io: 124 MiB [mem 0x70800000-0x783fffff] <7>[ 51.796607] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x63e04018 <7>[ 51.796804] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 3.0.0 <7>[ 51.796964] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7>[ 51.797131] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7>[ 51.797297] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7>[ 51.797446] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Mailbox #2 for backlight present <7>[ 51.797609] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 51.797761] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR5 <7>[ 51.797923] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 8 <7>[ 51.798095] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 4 <7>[ 51.798257] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7>[ 51.798417] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=3200 tRP=64 tRDPRE=40 tRAS=136 tRCD=64 tRC=200 <7>[ 51.798586] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=6000 tRP=112 tRDPRE=80 tRAS=0 tRCD=112 tRC=112 <7>[ 51.798750] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=16 tRCD=120 tRC=136 <7>[ 51.798915] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 3: DCLK=5600 tRP=104 tRDPRE=80 tRAS=240 tRCD=104 tRC=344 <7>[ 51.799088] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 0: num_planes=0 deratedbw=28913 peakbw: 51200 <7>[ 51.799255] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 51.799406] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 51.799554] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 51.799702] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 0: num_planes=0 deratedbw=35532 peakbw: 51200 <7>[ 51.799850] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 51.800000] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 51.800164] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 51.800321] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 51.800470] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 51.800620] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 51.800767] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 51.800916] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 51.801065] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 51.801231] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 51.801390] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 51.801535] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 51.801682] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 51.801832] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 51.801984] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 51.802146] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 51.802304] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 51.802450] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 51.802596] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 51.803487] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7>[ 51.803675] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT METEORLAKE ", BDB version 253 <7>[ 51.803837] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7) <7>[ 51.803993] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5) <7>[ 51.804186] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7>[ 51.804342] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7>[ 51.804495] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 850) <7>[ 51.804648] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34) <7>[ 51.804795] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7>[ 51.804958] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7>[ 51.805129] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366) <7>[ 51.805278] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305) <7>[ 51.805427] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 98, min size 136) <7>[ 51.805580] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7>[ 51.805731] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7>[ 51.805879] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 51.806026] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7>[ 51.806184] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7>[ 51.806337] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7>[ 51.806484] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 51.806639] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7>[ 51.806791] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 51.806942] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 51.807099] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7>[ 51.807249] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 51.807396] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 51.807544] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 51.807696] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 51.807848] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 51.807998] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 51.808167] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a <7>[ 51.808347] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 51.808563] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7>[ 51.808765] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 51.808995] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 51.809259] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7>[ 51.809444] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7>[ 51.809604] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 51.809766] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 51.809973] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7>[ 51.810153] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7>[ 51.810329] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B <7>[ 51.810490] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C <7>[ 51.810651] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D <7>[ 51.811271] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/mtl_dmc.bin <7>[ 51.811806] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7>[ 51.813297] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us <7>[ 51.813471] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7>[ 51.813649] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 85 (85.0 usec) <7>[ 51.813806] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 86 (86.0 usec) <7>[ 51.813960] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 101 (101.0 usec) <7>[ 51.814145] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 102 (102.0 usec) <7>[ 51.814294] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 155 (155.0 usec) <7>[ 51.814442] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 6 (6.0 usec) <7>[ 51.814588] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 91 (91.0 usec) <7>[ 51.814732] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 92 (92.0 usec) <7>[ 51.814876] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 107 (107.0 usec) <7>[ 51.815020] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 108 (108.0 usec) <7>[ 51.815186] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 161 (161.0 usec) <7>[ 51.818042] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7>[ 51.818333] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x86fc0 <7>[ 51.818575] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7>[ 51.818839] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f004 = 0x42c0408 (EVT_HTP) <7>[ 51.819062] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL) <7>[ 51.819282] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x8f008 = 0x534052f4 (EVT_HTP) <7>[ 51.819484] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 1: <7>[ 51.819637] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f074 = 0x96fc0 <7>[ 51.819787] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling) <7>[ 51.819942] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f004 = 0x212c20f4 (EVT_HTP) <7>[ 51.820108] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling) <7>[ 51.820264] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f008 = 0x222021e8 (EVT_HTP) <7>[ 51.820429] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 51.820600] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f00c = 0x23f422dc (EVT_HTP) <7>[ 51.820768] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 51.820932] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f010 = 0x26ec26c0 (EVT_HTP) <7>[ 51.821020] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 4 display pipes available. <7>[ 51.821108] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 2: <7>[ 51.821275] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f474 = 0x9efc0 <7>[ 51.821438] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling) <7>[ 51.821595] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f404 = 0xa618a5e0 (EVT_HTP) <7>[ 51.821764] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling) <7>[ 51.821936] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f408 = 0xa70ca6d4 (EVT_HTP) <7>[ 51.822113] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 51.822271] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f40c = 0xa8e0a7c8 (EVT_HTP) <7>[ 51.822431] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 51.822602] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f410 = 0xabd8abac (EVT_HTP) <7>[ 51.822761] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 3: <7>[ 51.822916] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f874 = 0x53fc0 <7>[ 51.823071] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 51.823245] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f80c = 0x24a02388 (EVT_HTP) <7>[ 51.823401] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 51.823568] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f810 = 0x2798276c (EVT_HTP) <7>[ 51.823737] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 4: <7>[ 51.823898] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5fc74 = 0x5afc0 <7>[ 51.824058] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 51.824227] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5fc0c = 0x94a09388 (EVT_HTP) <7>[ 51.824391] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5fc40 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 51.824560] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5fc10 = 0x9798976c (EVT_HTP) <7>[ 51.828636] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 51.828847] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz <7>[ 51.829029] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 1305600 kHz <7>[ 51.830448] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:506:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 51.832504] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:506:DDI A/PHY A] <7>[ 51.832718] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7>[ 51.832882] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7>[ 51.833038] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7>[ 51.833210] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 51.833392] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <6>[ 51.833530] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/mtl_dmc.bin (v2.23) <7>[ 51.833574] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7>[ 51.833744] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7>[ 51.833893] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7>[ 51.834041] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 51.834384] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:506:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 51.834615] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 51.834765] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 51.834911] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 51.835055] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 51.835223] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 51.835520] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 51.835848] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 51.837258] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turning VDD on <7>[ 51.837546] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 51.838786] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 00 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 51.839159] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7>[ 51.839732] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 04 83 85 04 00 <7>[ 51.840472] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 3 <7>[ 51.840940] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] PSR2 supported <7>[ 51.842275] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 51.848097] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 51.848107] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor <7>[ 51.848112] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0 <7>[ 51.848164] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:507:eDP-1] using preferred EDID fixed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 51.848618] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:507:eDP-1] Performing OUI wait (0 ms) <7>[ 51.849119] i915 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [i915]] [CONNECTOR:507:eDP-1] Detected unsupported HDR backlight interface version 0 <7>[ 51.849296] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:507:eDP-1] DRRS type: none <7>[ 51.849541] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:507:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 51.849727] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:507:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 51.849968] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 51.850152] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 51.850310] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 51.850470] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 51.850627] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 51.850897] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 51.851187] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:515:DDI B/PHY B] Using AUX CH B (VBT) <7>[ 51.851364] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:515:DDI B/PHY B] <7>[ 51.851804] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:515:DDI B/PHY B] <7>[ 51.851946] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:515:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7>[ 51.852313] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:533:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 51.852616] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 51.852900] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:533:DDI TC1/PHY TC1] <7>[ 51.853344] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:542:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 51.853603] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected) <7>[ 51.853948] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7>[ 51.854125] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:542:DDI TC2/PHY TC2] <7>[ 51.854280] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:542:DDI TC2/PHY TC2] Using DDC pin 0xa (VBT) <7>[ 51.854526] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:546:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 51.854742] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port F/TC#3: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 51.854980] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:546:DDI TC3/PHY TC3] <7>[ 51.855310] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:555:DDI TC4/PHY TC4] Using AUX CH USBC4 (VBT) <7>[ 51.855553] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port G/TC#4: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 51.855797] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:555:DDI TC4/PHY TC4] <7>[ 51.856252] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled <6>[ 51.856439] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io:owns=io+mem <7>[ 51.857192] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:150:pipe A] hw state readout: enabled <7>[ 51.857553] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:268:pipe B] hw state readout: disabled <7>[ 51.857874] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:386:pipe C] hw state readout: disabled <7>[ 51.858199] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:504:pipe D] hw state readout: disabled <7>[ 51.858388] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] hw state readout: enabled, pipe A <7>[ 51.858584] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:64:plane 2A] hw state readout: disabled, pipe A <7>[ 51.858762] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 3A] hw state readout: disabled, pipe A <7>[ 51.858918] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:124:plane 4A] hw state readout: disabled, pipe A <7>[ 51.859077] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:134:plane 5A] hw state readout: disabled, pipe A <7>[ 51.859240] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:144:cursor A] hw state readout: disabled, pipe A <7>[ 51.859415] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B <7>[ 51.859587] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B <7>[ 51.859743] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B <7>[ 51.859898] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B <7>[ 51.860052] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B <7>[ 51.860224] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:262:cursor B] hw state readout: disabled, pipe B <7>[ 51.860393] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:270:plane 1C] hw state readout: disabled, pipe C <7>[ 51.860565] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:300:plane 2C] hw state readout: disabled, pipe C <7>[ 51.860730] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:330:plane 3C] hw state readout: disabled, pipe C <7>[ 51.860884] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:360:plane 4C] hw state readout: disabled, pipe C <7>[ 51.861038] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:370:plane 5C] hw state readout: disabled, pipe C <7>[ 51.861204] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:380:cursor C] hw state readout: disabled, pipe C <7>[ 51.861371] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:388:plane 1D] hw state readout: disabled, pipe D <7>[ 51.861542] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:418:plane 2D] hw state readout: disabled, pipe D <7>[ 51.861711] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:448:plane 3D] hw state readout: disabled, pipe D <7>[ 51.861870] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:478:plane 4D] hw state readout: disabled, pipe D <7>[ 51.862024] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:488:plane 5D] hw state readout: disabled, pipe D <7>[ 51.862187] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:498:cursor D] hw state readout: disabled, pipe D <7>[ 51.863279] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 51.863489] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:506:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 51.863662] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:515:DDI B/PHY B] hw state readout: disabled, pipe A <7>[ 51.863815] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:517:DP-MST A] hw state readout: disabled, pipe A <7>[ 51.863963] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:518:DP-MST B] hw state readout: disabled, pipe B <7>[ 51.864117] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:519:DP-MST C] hw state readout: disabled, pipe C <7>[ 51.864269] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:520:DP-MST D] hw state readout: disabled, pipe D <7>[ 51.864503] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 51.864660] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:533:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 51.864806] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:535:DP-MST A] hw state readout: disabled, pipe A <7>[ 51.864950] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:536:DP-MST B] hw state readout: disabled, pipe B <7>[ 51.865099] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:537:DP-MST C] hw state readout: disabled, pipe C <7>[ 51.865241] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:538:DP-MST D] hw state readout: disabled, pipe D <7>[ 51.865434] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 51.865586] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:542:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 51.865751] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 51.865898] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:546:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 51.866044] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:548:DP-MST A] hw state readout: disabled, pipe A <7>[ 51.866203] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:549:DP-MST B] hw state readout: disabled, pipe B <7>[ 51.866350] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:550:DP-MST C] hw state readout: disabled, pipe C <7>[ 51.866495] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:551:DP-MST D] hw state readout: disabled, pipe D <7>[ 51.866653] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port G/TC#4: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 51.866799] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:555:DDI TC4/PHY TC4] hw state readout: disabled, pipe A <7>[ 51.866942] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:557:DP-MST A] hw state readout: disabled, pipe A <7>[ 51.867091] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:558:DP-MST B] hw state readout: disabled, pipe B <7>[ 51.867236] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:559:DP-MST C] hw state readout: disabled, pipe C <7>[ 51.867381] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:560:DP-MST D] hw state readout: disabled, pipe D <7>[ 51.868339] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:150:pipe A] reserving DPLL 0 <7>[ 51.868499] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x1, on 1 <7>[ 51.868659] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 51.868812] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7>[ 51.868968] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 51.869146] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7>[ 51.869308] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7>[ 51.869468] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7>[ 51.869734] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:507:eDP-1] hw state readout: enabled <7>[ 51.869909] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:516:DP-1] hw state readout: disabled <7>[ 51.870084] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:528:HDMI-A-1] hw state readout: disabled <7>[ 51.870249] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:534:DP-2] hw state readout: disabled <7>[ 51.870413] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:543:HDMI-A-2] hw state readout: disabled <7>[ 51.870575] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:547:DP-3] hw state readout: disabled <7>[ 51.870736] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:556:DP-4] hw state readout: disabled <7>[ 51.870952] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] min_cdclk 256910 kHz <7>[ 51.871115] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:64:plane 2A] min_cdclk 0 kHz <7>[ 51.871268] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 3A] min_cdclk 0 kHz <7>[ 51.871413] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:124:plane 4A] min_cdclk 0 kHz <7>[ 51.871557] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:134:plane 5A] min_cdclk 0 kHz <7>[ 51.871701] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:144:cursor A] min_cdclk 0 kHz <7>[ 51.871847] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:150:pipe A] min_cdclk 256910 kHz <7>[ 51.871991] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:152:plane 1B] min_cdclk 0 kHz <7>[ 51.872145] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:182:plane 2B] min_cdclk 0 kHz <7>[ 51.872287] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:212:plane 3B] min_cdclk 0 kHz <7>[ 51.872429] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:242:plane 4B] min_cdclk 0 kHz <7>[ 51.872587] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:252:plane 5B] min_cdclk 0 kHz <7>[ 51.872727] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:262:cursor B] min_cdclk 0 kHz <7>[ 51.872869] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:268:pipe B] min_cdclk 0 kHz <7>[ 51.873009] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:270:plane 1C] min_cdclk 0 kHz <7>[ 51.873189] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:300:plane 2C] min_cdclk 0 kHz <7>[ 51.873336] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:330:plane 3C] min_cdclk 0 kHz <7>[ 51.873482] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:360:plane 4C] min_cdclk 0 kHz <7>[ 51.873627] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:370:plane 5C] min_cdclk 0 kHz <7>[ 51.873770] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:380:cursor C] min_cdclk 0 kHz <7>[ 51.873914] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:386:pipe C] min_cdclk 0 kHz <7>[ 51.874056] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:388:plane 1D] min_cdclk 0 kHz <7>[ 51.874217] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:418:plane 2D] min_cdclk 0 kHz <7>[ 51.874363] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:448:plane 3D] min_cdclk 0 kHz <7>[ 51.874510] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:478:plane 4D] min_cdclk 0 kHz <7>[ 51.874656] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:488:plane 5D] min_cdclk 0 kHz <7>[ 51.874801] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:498:cursor D] min_cdclk 0 kHz <7>[ 51.874946] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:504:pipe D] min_cdclk 0 kHz <7>[ 51.875305] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:150:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 51.875461] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 51.875615] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:386:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 51.875761] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:504:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 51.875906] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe A data rate 2055280 num active planes 1 <7>[ 51.876070] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe B data rate 0 num active planes 0 <7>[ 51.876248] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe C data rate 0 num active planes 0 <7>[ 51.876407] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe D data rate 0 num active planes 0 <7>[ 51.876721] i915 0000:00:02.0: [drm:intel_cmtg_sanitize [i915]] CMTG readout: CMTG A: enabled, CMTG B: n/a, Transcoder A secondary: yes, Transcoder B secondary: no <7>[ 51.877078] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:150:pipe A] enable: yes [setup_hw_state] <7>[ 51.877242] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 51.877399] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 51.877553] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 51.877705] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 51.877856] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7>[ 51.878006] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 51.878182] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 623587, link_n: 524288, tu: 64 <7>[ 51.878336] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 51.878488] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7>[ 51.878638] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7>[ 51.878788] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7>[ 51.878938] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7>[ 51.879092] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 51.879240] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7>[ 51.879388] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7>[ 51.879536] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7>[ 51.879688] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7>[ 51.879840] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7>[ 51.879991] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 51.880148] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 51.880300] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 51.880453] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 51.880605] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 51.880755] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 513820, min cdclk 256910 <7>[ 51.880905] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 51.881054] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 51.881215] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 51.881363] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 51.881514] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 51.881667] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: fracen: no, <7>[ 51.881818] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 225, tx_clk_div: 1. <7>[ 51.881969] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state: <7>[ 51.882128] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21 <7>[ 51.882275] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 51.882422] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 51.882570] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 51.882720] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 51.882870] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 51.883019] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 51.883177] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 51.883325] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 51.883472] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 51.883619] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 51.883766] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 51.883914] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 51.884065] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 51.884227] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 51.884375] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 51.884524] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 51.884677] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 51.884827] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 51.884976] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:268:pipe B] enable: no [setup_hw_state] <7>[ 51.885135] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:386:pipe C] enable: no [setup_hw_state] <7>[ 51.885288] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:504:pipe D] enable: no [setup_hw_state] <7>[ 51.885439] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] TBT PLL enabled but not in use, disabling <7>[ 51.885797] i915 0000:00:02.0: [drm:skl_get_initial_plane_config [i915]] [CRTC:150:pipe A][PLANE:34:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800 <7>[ 51.885962] i915 0000:00:02.0: [drm:initial_plane_vma [i915]] Using dma_addr=0x0000000000800000, based on initial plane programming <7>[ 51.886134] i915 0000:00:02.0: [drm:_i915_gem_object_stolen_init [i915]] creating preallocated stolen object: stolen_offset=0x0000000000000000, size=0x00000000013c7000 <7>[ 51.886655] i915 0000:00:02.0: [drm:initial_plane_vma [i915]] Initial plane fb bound to 0x0 in the ggtt (original 0xfec00000) <7>[ 51.897300] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [2048K, 832K) <7>[ 51.903306] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [1040K, 832K) <7>[ 51.903475] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [13c7000, fee00000] <7>[ 51.903620] i915 0000:00:02.0: [drm:nop_init_clock_gating [i915]] No clock gating settings or workarounds applied. <7>[ 51.903766] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: L3BANK steering: group=0x0, instance=0x0 <7>[ 51.903916] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: DSS steering: group=0x0, instance=0x0 <7>[ 51.904061] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: INSTANCE 0 steering: group=0x0, instance=0x0 <7>[ 51.904228] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7>[ 51.906753] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 7 engine workarounds on rcs'0 <7>[ 51.906925] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 whitelist workarounds on rcs'0 <7>[ 51.907092] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 7 context workarounds on rcs'0 <7>[ 51.907952] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 engine workarounds on bcs'0 <7>[ 51.908135] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 context workarounds on bcs'0 <7>[ 51.908567] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 engine workarounds on ccs'0 <7>[ 51.908728] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 context workarounds on ccs'0 <7>[ 51.909925] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 51.910121] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 24 ext-regs. <7>[ 51.910301] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7>[ 51.931332] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0x13c804f <7>[ 51.931535] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x410800 <7>[ 51.931693] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4 <7>[ 51.931847] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7>[ 51.931999] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x2f92 <7>[ 51.932163] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x7d550008 <7>[ 51.932314] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7>[ 51.932462] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7>[ 51.932607] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7>[ 51.932752] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7>[ 51.932896] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7>[ 51.933041] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7>[ 51.933197] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7>[ 51.933341] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <6>[ 51.934269] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/mtl_guc_70.bin version 70.53.0 <7>[ 51.944142] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 8ms, freq = 1750MHz -> 1750MHz vs 2200MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 51.945012] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6>[ 51.946654] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6>[ 51.946656] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <6>[ 51.947102] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled <7>[ 51.947404] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT0: GUC: Querying HW config table: size = 0, offset = 0x00000000 <7>[ 51.948201] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT0: GUC: Querying HW config table: size = 752, offset = 0x01FFC000 <7>[ 51.955939] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: OADDRM steering: group=0x0, instance=0x0 <7>[ 51.956142] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 5 GT workarounds on global <7>[ 51.957659] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'0 <7>[ 51.957841] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'0 <7>[ 51.958892] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'2 <7>[ 51.959061] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'2 <7>[ 51.959717] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vecs'0 <7>[ 51.959877] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vecs'0 <7>[ 51.960774] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on other'6 <7>[ 51.960928] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on other'6 <7>[ 51.962786] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT1: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 51.962983] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT1: GUC: capture found 24 ext-regs. <7>[ 51.963176] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT1: GUC: Used 4 KB for temporary ADS regset <7>[ 51.985333] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 0] = 0x1ffd04f <7>[ 51.985516] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 1] = 0x400000 <7>[ 51.985672] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 2] = 0x4 <7>[ 51.985825] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 3] = 0x3 <7>[ 51.985976] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 4] = 0x47fc <7>[ 51.986252] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 5] = 0x7d550008 <7>[ 51.986430] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 6] = 0x0 <7>[ 51.986583] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 7] = 0x0 <7>[ 51.986733] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 8] = 0x0 <7>[ 51.986881] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 9] = 0x0 <7>[ 51.987039] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[10] = 0x0 <7>[ 51.987352] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[11] = 0x0 <7>[ 51.987531] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[12] = 0x0 <7>[ 51.987747] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[13] = 0x0 <7>[ 51.987910] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT1: HuC: loaded by GSC = no <7>[ 51.992969] i915 0000:00:02.0: [drm:i915_gsc_proxy_component_bind [i915]] GT1: GSC proxy mei component bound <6>[ 51.993166] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops i915_gsc_proxy_component_ops [i915]) <6>[ 51.993690] i915 0000:00:02.0: [drm] GT1: GuC firmware i915/mtl_guc_70.bin version 70.53.0 <6>[ 51.993692] i915 0000:00:02.0: [drm] GT1: HuC firmware i915/mtl_huc_gsc.bin version 8.5.4 <7>[ 52.007163] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT1: GUC: init took 12ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 52.007439] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled <7>[ 52.016167] i915 0000:00:02.0: [drm:intel_huc_wait_for_auth_complete [i915]] GT1: HuC: auth took 8ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x0000C1DC, count = 0, ret = 0 <6>[ 52.016327] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for clear media <6>[ 52.017221] i915 0000:00:02.0: [drm] GT1: GUC: submission enabled <6>[ 52.017222] i915 0000:00:02.0: [drm] GT1: GUC: SLPC enabled <6>[ 52.017407] i915 0000:00:02.0: [drm] GT1: GUC: RC enabled <7>[ 52.017601] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT1: GUC: Querying HW config table: size = 0, offset = 0x00000000 <7>[ 52.018627] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT1: GUC: Querying HW config table: size = 752, offset = 0xFEDD0000 <7>[ 52.025951] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7>[ 52.026409] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7>[ 52.026818] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7>[ 52.027138] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'2 to vcs1 <7>[ 52.027383] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7>[ 52.027626] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed ccs'0 to ccs0 <7>[ 52.027867] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed other'6 to other0 <6>[ 52.029672] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized <7>[ 52.030883] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:150:pipe A] FQ 0: start 0x90008 <7>[ 52.031065] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:150:pipe A] FQ 1: start 0x90108 <7>[ 52.031253] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:150:pipe A] FQ 2: start 0x90208 <7>[ 52.031420] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:150:pipe A] FQ 3: start 0x90308 <7>[ 52.031583] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:150:pipe A] FQ 4: start 0x903c8 <7>[ 52.031739] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:268:pipe B] FQ 0: start 0x98008 <7>[ 52.031896] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:268:pipe B] FQ 1: start 0x98108 <7>[ 52.032051] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:268:pipe B] FQ 2: start 0x98208 <7>[ 52.032224] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:268:pipe B] FQ 3: start 0x98308 <7>[ 52.032387] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:268:pipe B] FQ 4: start 0x983c8 <7>[ 52.032542] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:386:pipe C] FQ 0: start 0x52008 <7>[ 52.032697] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:386:pipe C] FQ 1: start 0x52108 <7>[ 52.032851] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:386:pipe C] FQ 2: start 0x52208 <7>[ 52.033007] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:386:pipe C] FQ 3: start 0x52308 <7>[ 52.033173] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:386:pipe C] FQ 4: start 0x523c8 <7>[ 52.033334] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:504:pipe D] FQ 0: start 0x59008 <7>[ 52.033491] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:504:pipe D] FQ 1: start 0x59108 <7>[ 52.033648] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:504:pipe D] FQ 2: start 0x59208 <7>[ 52.033805] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:504:pipe D] FQ 3: start 0x59308 <7>[ 52.033961] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:504:pipe D] FQ 4: start 0x593c8 <7>[ 52.034456] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 52.034640] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:150:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 52.034814] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 2048) -> ( 0 - 4001), size 2048 -> 4001 <7>[ 52.034974] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:144:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95 <7>[ 52.035153] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm <7>[ 52.035308] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 2, 2, 2, 2, 2, 2, 0, 0, 1, 3, 1 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 <7>[ 52.035456] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 49, 49, 49, 49, 49, 49, 0, 0, 7, 73, 7 -> 49, 385, 385, 457, 457, 673, 0, 0, 0, 73, 0 <7>[ 52.035602] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 0, 82, 0 <7>[ 52.035790] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:268:pipe B] enable: no [fastset] <7>[ 52.035958] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:386:pipe C] enable: no [fastset] <7>[ 52.036145] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:504:pipe D] enable: no [fastset] <7>[ 52.037733] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 42393600 bytes of contiguous stolen space for FBC, limit: 1 <7>[ 52.037907] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:34:plane 1A] <7>[ 52.038138] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: no -> yes (pipe: A) <7>[ 52.038315] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 4 (mbus joined: yes) <7>[ 52.039872] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:268:pipe B] <7>[ 52.040289] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:386:pipe C] <7>[ 52.040628] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:504:pipe D] <7>[ 52.044424] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:507:eDP-1] adding connector to sysfs <7>[ 52.047132] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:507:eDP-1] backlight device intel_backlight registered <7>[ 52.047342] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:507:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7>[ 52.047524] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:507:eDP-1] Panel prepare <7>[ 52.047927] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 52.049114] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:507:eDP-1] generating connector hotplug event <7>[ 52.049176] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:516:DP-1] adding connector to sysfs <7>[ 52.049583] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7>[ 52.050413] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:516:DP-1] generating connector hotplug event <7>[ 52.050500] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:528:HDMI-A-1] adding connector to sysfs <7>[ 52.050757] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:528:HDMI-A-1] generating connector hotplug event <7>[ 52.050790] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:534:DP-2] adding connector to sysfs <7>[ 52.051198] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2 <7>[ 52.051937] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:534:DP-2] generating connector hotplug event <7>[ 52.051971] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:543:HDMI-A-2] adding connector to sysfs <7>[ 52.052270] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:543:HDMI-A-2] generating connector hotplug event <7>[ 52.052304] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:547:DP-3] adding connector to sysfs <7>[ 52.052690] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 52.053429] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:547:DP-3] generating connector hotplug event <7>[ 52.053463] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:556:DP-4] adding connector to sysfs <7>[ 52.053832] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY TC4 bus for card0-DP-4 <7>[ 52.054621] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:556:DP-4] generating connector hotplug event <6>[ 52.054655] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7>[ 52.057032] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected <6>[ 52.069413] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 52.073737] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 <7>[ 52.074888] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 52.075147] i915 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [i915]] aud_ts_cdclk set to M=60, N=768 <7>[ 52.075626] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 52.075631] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7>[ 52.076487] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] found possible fb from [PLANE:34:plane 1A] <7>[ 52.076668] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:268:pipe B] not active, skipping <7>[ 52.076838] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:386:pipe C] not active, skipping <6>[ 52.076960] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7>[ 52.077003] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:504:pipe D] not active, skipping <7>[ 52.077186] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] checking [PLANE:34:plane 1A] for BIOS fb <7>[ 52.077361] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:150:pipe A] area: 2880x1800, bpp: 32, size: 20736000 <7>[ 52.077494] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 52.077530] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] fb big enough [PLANE:34:plane 1A] (20738048 >= 20736000) <7>[ 52.077733] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:268:pipe B] not active, skipping <7>[ 52.077923] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:386:pipe C] not active, skipping <7>[ 52.078154] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:504:pipe D] not active, skipping <7>[ 52.078307] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] using BIOS fb for initial console <7>[ 52.078670] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:516:DP-1] <7>[ 52.079372] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 52.082347] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 52.082374] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9a01 <7>[ 52.082994] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:516:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 52.083123] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7>[ 52.083148] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7>[ 52.083216] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1] <7>[ 52.087506] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:528:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 52.087679] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:534:DP-2] <7>[ 52.088180] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 52.088452] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:534:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 52.088637] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:543:HDMI-A-2] <7>[ 52.089011] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7>[ 52.093293] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:543:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 52.093479] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:547:DP-3] <7>[ 52.093729] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 52.093966] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:547:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 52.094176] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:556:DP-4] <7>[ 52.094462] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 52.094715] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:556:DP-4] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 52.095138] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 52.095400] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] <7>[ 52.095408] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1] <7>[ 52.096684] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 52.097371] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 52.097566] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 52.097746] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 52.098040] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 52.098045] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor <7>[ 52.098050] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0 <7>[ 52.098082] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: no <7>[ 52.098235] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 52.098406] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 52.099348] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] status updated from unknown to connected <7>[ 52.099671] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 52.100265] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes: <7>[ 52.100274] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 52.100278] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] <7>[ 52.100282] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:516:DP-1] <7>[ 52.104571] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] disconnected <7>[ 52.104579] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] <7>[ 52.104583] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1] <7>[ 52.108916] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected <7>[ 52.108943] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] <7>[ 52.108957] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:534:DP-2] <7>[ 52.109631] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected <7>[ 52.109638] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:HDMI-A-2] <7>[ 52.109642] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:543:HDMI-A-2] <7>[ 52.114020] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:HDMI-A-2] disconnected <7>[ 52.114030] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:547:DP-3] <7>[ 52.114036] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:547:DP-3] <7>[ 52.114572] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:547:DP-3] disconnected <7>[ 52.114580] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:556:DP-4] <7>[ 52.114584] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:556:DP-4] <7>[ 52.114884] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:556:DP-4] disconnected <7>[ 52.114888] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] enabled? yes <7>[ 52.114892] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:516:DP-1] enabled? no <7>[ 52.114895] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:528:HDMI-A-1] enabled? no <7>[ 52.114898] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:DP-2] enabled? no <7>[ 52.114901] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:HDMI-A-2] enabled? no <7>[ 52.114903] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:547:DP-3] enabled? no <7>[ 52.114906] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:556:DP-4] enabled? no <7>[ 52.115022] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 52.115044] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] found preferred mode: 2880x1800 <7>[ 52.115047] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 52.115058] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 2880x1800 set (0,0) <7>[ 52.115156] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7>[ 52.115230] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] re-using BIOS fb <7>[ 52.115458] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 2880x1800 fb: 0x00000000 <6>[ 52.116469] fbcon: i915drmfb (fb0) is primary device <7>[ 52.117716] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:507:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 52.118063] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:506:DDI A/PHY A][CRTC:150:pipe A] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7>[ 52.118281] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 link rate required 1926825 available 2160000 <7>[ 52.118478] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:150:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 52.118655] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:506:DDI A/PHY A] [CRTC:150:pipe A] <7>[ 52.118855] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 623587/524288, found tu 64, data 7483046/8388608 link 498869/524288) <7>[ 52.119039] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in dpll_hw_state <7>[ 52.119238] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7>[ 52.119454] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 52.119629] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_hw_state: fracen: no, <7>[ 52.119811] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] multiplier: 225, tx_clk_div: 1. <7>[ 52.119981] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_rawhw_state: <7>[ 52.120174] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] tx: 0x10, cmn: 0x21 <7>[ 52.120357] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 52.120535] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 52.120712] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 52.120885] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 52.121051] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 52.121257] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7>[ 52.121448] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 52.121629] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_hw_state: fracen: yes, <7>[ 52.121795] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] quot: 40960, rem: 0, den: 1, <7>[ 52.121965] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 52.122138] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_rawhw_state: <7>[ 52.122310] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] tx: 0x10, cmn: 0x21 <7>[ 52.122469] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 52.122637] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 52.122801] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 52.122962] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 52.123156] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 52.123351] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 52.123519] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 432000, found 540000) <7>[ 52.123682] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in set_context_latency (expected 0, found 1) <7>[ 52.123840] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7>[ 52.124017] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:150:pipe A] releasing DPLL 0 <7>[ 52.124257] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 52.124441] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 <7>[ 52.124628] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 0, 73, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 <7>[ 52.124811] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 0, 82, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 <7>[ 52.124982] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 52.125157] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 52.125328] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 52.125488] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 52.125648] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 52.125803] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 52.125955] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 52.126131] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 52.126318] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 52.126498] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 52.126670] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 52.126839] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 52.127010] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 52.127179] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 52.127337] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 52.127490] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 52.127638] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 52.127798] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 52.127955] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 52.128115] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 52.128485] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200 <7>[ 52.128791] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 52.128952] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 52.129124] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 52.129286] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159 <7>[ 52.129502] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:150:pipe A] allocated DPLL 0 <7>[ 52.129688] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:150:pipe A] reserving DPLL 0 <7>[ 52.129867] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:150:pipe A] enable: yes [modeset] <7>[ 52.130030] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 52.130209] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 52.130382] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 52.130558] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 52.130725] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7>[ 52.130879] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 52.131049] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 52.131235] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 52.131395] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7>[ 52.131558] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7>[ 52.131726] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7>[ 52.131909] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7>[ 52.132068] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 52.132245] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 4, length 14 <7>[ 52.132400] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7>[ 52.132560] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7>[ 52.132583] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 52.132721] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7>[ 52.132882] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7>[ 52.132875] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 52.133047] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7>[ 52.133215] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7>[ 52.133254] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 52.133376] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 1 <7>[ 52.133542] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1878, vmax: 1878, flipline: 1878, pipeline full: 0, guardband: 76 vsync start: 75, vsync end: 69 <7>[ 52.133524] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 52.133709] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1878, vmax vtotal: 1878 <7>[ 52.133778] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 52.133868] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7>[ 52.134029] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 52.134024] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 52.134198] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 52.134357] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 52.134383] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 52.134516] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 52.134633] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 52.134681] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 52.134856] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820, min cdclk 256910 <7>[ 52.134883] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 52.135021] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 52.135189] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 52.135294] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 52.135353] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 52.135516] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 52.135539] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 52.135679] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 52.135780] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 52.135833] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: fracen: yes, <7>[ 52.135980] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] quot: 40960, rem: 0, den: 1, <7>[ 52.136021] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 52.136137] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 52.136287] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state: <7>[ 52.136266] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 52.136456] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21 <7>[ 52.136522] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 52.136632] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 52.136791] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 52.136767] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 52.136940] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 52.137006] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 52.137095] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 52.137242] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 52.137251] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 52.137394] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 52.137493] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 52.137549] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 52.137699] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 52.137733] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 52.137847] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.137996] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.137973] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 52.138158] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.138221] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 52.138308] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 52.138462] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 52.138464] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 52.138631] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.138703] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 52.138795] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.138959] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.138942] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 52.139127] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 52.139186] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 52.139278] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 52.139438] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:565] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 52.139432] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 52.139614] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 52.139682] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 52.139783] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 52.139949] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 2A] fb: [NOFB], visible: no <7>[ 52.139922] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 52.140108] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 3A] fb: [NOFB], visible: no <7>[ 52.140162] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 52.140260] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:124:plane 4A] fb: [NOFB], visible: no <7>[ 52.140446] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:134:plane 5A] fb: [NOFB], visible: no <7>[ 52.140416] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 52.140609] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:144:cursor A] fb: [NOFB], visible: no <7>[ 52.140661] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 52.140899] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 52.141145] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 52.141385] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 52.141632] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <6>[ 52.145959] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 52.147093] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <6>[ 52.147707] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 <6>[ 52.148377] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <7>[ 52.151385] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <6>[ 52.169494] i915 0000:00:02.0: [drm] GT1: Loaded GSC firmware i915/mtl_gsc_1.bin (cv1.0, r102.1.15.1926, svn 1) <7>[ 52.190769] i915 0000:00:02.0: [drm:intel_huc_wait_for_auth_complete [i915]] GT1: HuC: auth took 0ms, freq = 1150MHz -> 1150MHz vs 1300MHz, status = 0x00116C68, count = 0, ret = 0 <6>[ 52.191031] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for all workloads <7>[ 52.357159] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:507:eDP-1] set backlight PWM = 0 <7>[ 52.358408] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7>[ 52.363308] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000 <7>[ 52.363445] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turn panel power off <7>[ 52.363948] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:506:DDI A/PHY A] - short <7>[ 52.364065] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 52.364737] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 52.416540] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7>[ 52.417167] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:506:DDI A/PHY A] - long <7>[ 52.417745] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7>[ 52.419261] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 52.420244] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:506:DDI A/PHY A] <7>[ 52.420270] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:150:pipe A] <7>[ 52.421020] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:506:DDI A/PHY A] <7>[ 52.422854] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7>[ 52.423595] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7>[ 52.424807] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:34:plane 1A] <7>[ 52.425381] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0xffff0072 0x13421c72) <7>[ 52.426005] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:506:DDI A/PHY A] <7>[ 52.426346] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:515:DDI B/PHY B] <7>[ 52.426549] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:517:DP-MST A] <7>[ 52.426708] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:518:DP-MST B] <7>[ 52.426863] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:519:DP-MST C] <7>[ 52.427060] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:520:DP-MST D] <7>[ 52.427342] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:533:DDI TC1/PHY TC1] <7>[ 52.427511] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:535:DP-MST A] <7>[ 52.427671] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:536:DP-MST B] <7>[ 52.427818] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:537:DP-MST C] <7>[ 52.427965] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:538:DP-MST D] <7>[ 52.428130] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:542:DDI TC2/PHY TC2] <7>[ 52.428279] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:546:DDI TC3/PHY TC3] <7>[ 52.428427] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:548:DP-MST A] <7>[ 52.428576] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:549:DP-MST B] <7>[ 52.428723] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:550:DP-MST C] <7>[ 52.428869] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:551:DP-MST D] <7>[ 52.429015] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:555:DDI TC4/PHY TC4] <7>[ 52.429186] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:557:DP-MST A] <7>[ 52.429329] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:558:DP-MST B] <7>[ 52.429475] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:559:DP-MST C] <7>[ 52.429719] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:560:DP-MST D] <7>[ 52.430113] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 52.431095] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:150:pipe A] <7>[ 52.431311] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7>[ 52.433211] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turn panel power on <7>[ 52.433396] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 wait for panel power cycle (487 ms remaining) <7>[ 52.654094] i915 0000:00:02.0: [drm:gsc_work [i915]] GT1: GSC Proxy initialized <7>[ 52.925515] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7>[ 53.020243] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 53.020905] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 53.021608] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 53.052898] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7>[ 53.053594] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:506:DDI A/PHY A] - long <7>[ 53.054173] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20 <7>[ 53.054761] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:506:DDI A/PHY A] <7>[ 53.175611] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 53.175530] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 53.175614] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4 <7>[ 53.175614] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 53.223933] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 53.224770] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turning VDD on <7>[ 53.225358] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 53.228222] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 53.229374] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 53.230225] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07 <7>[ 53.231345] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 53.232278] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 53.233240] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 53.233386] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7>[ 53.235156] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 53.235307] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7>[ 53.235946] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7>[ 53.236255] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7>[ 53.236410] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7>[ 53.236620] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:507:eDP-1] set backlight PWM = 192000 <7>[ 53.247580] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2 <7>[ 53.249328] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:507:eDP-1] <7>[ 53.249623] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:150:pipe A] <7>[ 53.251400] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 53.253013] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0x2000071 0x13421c72) <6>[ 53.253893] Console: switching to colour frame buffer device 180x56 <7>[ 53.253783] i915 0000:00:02.0: [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=9600/192000 <7>[ 53.254263] i915 0000:00:02.0: [drm:intel_panel_actually_set_backlight [i915]] [CONNECTOR:507:eDP-1] set backlight level = 13892 <6>[ 53.272869] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7>[ 53.272883] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 14 <7>[ 53.273081] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: C0 <7>[ 53.273250] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7>[ 53.273412] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: yes <7>[ 53.273571] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: yes <7>[ 53.273729] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7>[ 53.273885] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7>[ 53.274041] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: yes <7>[ 53.274210] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7>[ 53.274366] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7>[ 53.274519] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7>[ 53.274676] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7>[ 53.274832] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7>[ 53.274986] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7>[ 53.275147] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7>[ 53.275299] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: no <7>[ 53.275451] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7>[ 53.275602] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7>[ 53.275753] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7>[ 53.275905] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7>[ 53.276054] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: yes <7>[ 53.276221] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 38400 kHz <7>[ 53.276663] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7>[ 53.276841] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D <7>[ 53.277230] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C <7>[ 53.277437] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B <7>[ 53.277637] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 53.277886] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x7d55 rev=0x08 platform=METEORLAKE (subplatform=0x0) gen=12 <7>[ 53.278028] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 12.71 <7>[ 53.278184] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 13 <7>[ 53.278319] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: B0 <7>[ 53.278450] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: C0 <7>[ 53.278578] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 0 <7>[ 53.278705] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x41 <7>[ 53.278830] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x211000 <7>[ 53.278954] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: METEORLAKE <7>[ 53.279088] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7>[ 53.279226] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7>[ 53.279352] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 46 <7>[ 53.279475] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7>[ 53.279598] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7>[ 53.279720] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7>[ 53.279842] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7>[ 53.279963] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7>[ 53.280093] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7>[ 53.280216] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7>[ 53.280340] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7>[ 53.280461] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7>[ 53.280582] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: yes <7>[ 53.280703] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: yes <7>[ 53.280811] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 53.280822] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 53.280823] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7>[ 53.280945] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7>[ 53.281035] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] <7>[ 53.281068] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7>[ 53.281044] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1] <7>[ 53.281207] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: yes <7>[ 53.281329] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: yes <7>[ 53.281449] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7>[ 53.281582] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7>[ 53.281714] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: no <7>[ 53.281845] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7>[ 53.281844] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 53.281971] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: yes <7>[ 53.282118] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7>[ 53.282249] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7>[ 53.282288] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 53.282376] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: yes <7>[ 53.282447] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 53.282500] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: yes <7>[ 53.282599] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 53.282625] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: yes <7>[ 53.282748] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7>[ 53.282826] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 53.282830] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor <7>[ 53.282836] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0 <7>[ 53.282869] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: yes <7>[ 53.282858] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: no <7>[ 53.282989] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7>[ 53.283006] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 53.283119] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7>[ 53.283164] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 53.283242] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7>[ 53.283366] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7>[ 53.283494] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: yes <7>[ 53.283626] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: no <7>[ 53.283757] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7>[ 53.283888] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7>[ 53.284002] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes: <7>[ 53.284010] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 53.284014] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] <7>[ 53.284016] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7>[ 53.284018] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:516:DP-1] <7>[ 53.284156] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7>[ 53.284285] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7>[ 53.284407] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 400003 <7>[ 53.284528] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 8 <7>[ 53.284648] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: geometry dss mask=00000000,000000ff <7>[ 53.284770] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: compute dss mask=00000000,000000ff <7>[ 53.284892] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 128 <7>[ 53.285014] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 16 <7>[ 53.285144] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7>[ 53.285269] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7>[ 53.285393] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: no <7>[ 53.285513] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 4041400 <7>[ 53.285633] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 8 <7>[ 53.285753] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: geometry dss mask=00000000,0000ff00 <7>[ 53.285874] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: compute dss mask=00000000,0000ff00 <7>[ 53.285994] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 128 <7>[ 53.286125] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 16 <7>[ 53.286245] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7>[ 53.286364] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7>[ 53.286485] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: no <6>[ 53.286607] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6>[ 53.286608] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6>[ 53.286608] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7>[ 53.288482] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] disconnected <7>[ 53.288488] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] <7>[ 53.288492] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1] <7>[ 53.292782] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected <7>[ 53.292789] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] <7>[ 53.292794] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:534:DP-2] <7>[ 53.293270] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 53.293508] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected <7>[ 53.293513] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:HDMI-A-2] <7>[ 53.293516] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:543:HDMI-A-2] <7>[ 53.293852] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7>[ 53.298092] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:HDMI-A-2] disconnected <7>[ 53.298098] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:547:DP-3] <7>[ 53.298102] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:547:DP-3] <7>[ 53.298344] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 53.298558] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:547:DP-3] disconnected <7>[ 53.298562] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:556:DP-4] <7>[ 53.298564] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:556:DP-4] <7>[ 53.298801] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 53.299009] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:556:DP-4] disconnected <7>[ 53.299012] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] enabled? yes <7>[ 53.299015] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:516:DP-1] enabled? no <7>[ 53.299017] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:528:HDMI-A-1] enabled? no <7>[ 53.299019] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:DP-2] enabled? no <7>[ 53.299021] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:HDMI-A-2] enabled? no <7>[ 53.299023] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:547:DP-3] enabled? no <7>[ 53.299025] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:556:DP-4] enabled? no <7>[ 53.299161] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 53.299181] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] found preferred mode: 2880x1800 <7>[ 53.299184] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 53.299217] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 2880x1800 set (0,0) <7>[ 53.303362] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 53.325254] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 53.325260] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 53.325464] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] <7>[ 53.325470] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1] <7>[ 53.326199] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 53.326628] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 53.326761] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 53.326901] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 53.327221] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 53.327224] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor <7>[ 53.327232] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0 <7>[ 53.327251] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: no <7>[ 53.327382] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 53.327511] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 53.328391] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes: <7>[ 53.328398] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 53.328402] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] <7>[ 53.328405] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:516:DP-1] <7>[ 53.332680] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] disconnected <7>[ 53.332685] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] <7>[ 53.332688] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1] <7>[ 53.336894] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected <7>[ 53.336899] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] <7>[ 53.336902] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:534:DP-2] <7>[ 53.337300] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected <7>[ 53.337305] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:HDMI-A-2] <7>[ 53.337308] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:543:HDMI-A-2] <7>[ 53.341667] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:HDMI-A-2] disconnected <7>[ 53.341672] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:547:DP-3] <7>[ 53.341675] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:547:DP-3] <7>[ 53.341987] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:547:DP-3] disconnected <7>[ 53.341993] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:556:DP-4] <7>[ 53.341998] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:556:DP-4] <7>[ 53.342316] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:556:DP-4] disconnected <7>[ 53.342319] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] enabled? yes <7>[ 53.342322] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:516:DP-1] enabled? no <7>[ 53.342324] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:528:HDMI-A-1] enabled? no <7>[ 53.342326] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:DP-2] enabled? no <7>[ 53.342328] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:HDMI-A-2] enabled? no <7>[ 53.342329] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:547:DP-3] enabled? no <7>[ 53.342331] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:556:DP-4] enabled? no <7>[ 53.342417] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 53.342429] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] found preferred mode: 2880x1800 <7>[ 53.342431] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 53.342451] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 2880x1800 set (0,0) <7>[ 53.347867] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 53.351379] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 53.358807] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c] <7>[ 53.381220] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 53.381298] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 53.383278] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509 <7>[ 53.403135] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 53.403210] [IGT] i915_module_load: finished subtest load, SUCCESS <7>[ 53.403432] [IGT] i915_module_load: exiting, ret=0 <7>[ 54.389468] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 54.389467] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 54.390567] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4 <7>[ 54.390768] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 55.863410] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turning VDD off <7>[ 55.864345] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 <7>[ 55.864730] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 55.865897] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 55.866400] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7>[ 58.661895] i915 0000:00:02.0: [drm:fwtable_write32 [i915]] Unclaimed access detected before write to register 0x44404 <7>[ 59.493903] i915 0000:00:02.0: [drm:fwtable_write32 [i915]] Unclaimed access detected before write to register 0x44404