Results for igt@kms_plane_scaling@plane-upscale-20x20-with-modifiers

Result: Pass

git-log-oneline i915_display_info12 igt_runner12 runtimes12 results12.json results12-i915-load.json guc_logs12.tar i915_display_info_post_exec12 boot12 dmesg12

DetailValue
Duration 3.08 seconds
Hostname
shard-dg1-14
Igt-Version
IGT-Version: 2.3-gea55f092d (x86_64) (Linux: 6.19.0-rc7-CI_DRM_17910-g69c1143407ca+ x86_64)
Out
Using IGT_SRANDOM=1769781210 for randomisation
Opened device: /dev/dri/card0
Starting subtest: plane-upscale-20x20-with-modifiers
Starting dynamic subtest: pipe-A
Trying on HDMI-A-1
Dynamic subtest pipe-A: SUCCESS (0.786s)
Starting dynamic subtest: pipe-B
Trying on HDMI-A-1
Dynamic subtest pipe-B: SUCCESS (0.755s)
Starting dynamic subtest: pipe-C
Trying on HDMI-A-1
Dynamic subtest pipe-C: SUCCESS (0.772s)
Starting dynamic subtest: pipe-D
Trying on HDMI-A-1
Dynamic subtest pipe-D: SUCCESS (0.755s)
Subtest plane-upscale-20x20-with-modifiers: SUCCESS (3.076s)
Err
Starting subtest: plane-upscale-20x20-with-modifiers
Starting dynamic subtest: pipe-A
Dynamic subtest pipe-A: SUCCESS (0.786s)
Starting dynamic subtest: pipe-B
Dynamic subtest pipe-B: SUCCESS (0.755s)
Starting dynamic subtest: pipe-C
Dynamic subtest pipe-C: SUCCESS (0.772s)
Starting dynamic subtest: pipe-D
Dynamic subtest pipe-D: SUCCESS (0.755s)
Subtest plane-upscale-20x20-with-modifiers: SUCCESS (3.076s)
Dmesg
<6> [413.815781] Console: switching to colour dummy device 80x25
<6> [413.816461] [IGT] kms_plane_scaling: executing
<7> [413.819559] i915 0000:03:00.0: [drm:i915_gem_open [i915]]
<7> [413.820739] i915 0000:03:00.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [413.821019] i915 0000:03:00.0: [drm:i915_gem_open [i915]]
<7> [413.834073] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:587:DP-1]
<7> [413.834081] i915 0000:03:00.0: [drm:intel_dp_detect [i915]] [CONNECTOR:587:DP-1]
<7> [413.834390] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [413.834573] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 01 to 00
<7> [413.834923] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling AUX_A
<7> [413.856018] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [413.877167] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [413.898319] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [413.919459] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [413.940593] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [413.961727] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [413.982874] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.004024] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.025206] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.046359] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.067507] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.088660] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.109810] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.130958] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.152107] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.173289] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.194441] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.215589] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.236736] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.257880] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.279027] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.300198] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.321352] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.342500] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.363648] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.384798] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.405953] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.427096] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.448263] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.469415] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.490560] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.511709] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.511890] i915 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110
<7> [414.511935] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:587:DP-1] disconnected
<7> [414.512731] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:606:HDMI-A-2]
<7> [414.512737] i915 0000:03:00.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:606:HDMI-A-2]
<7> [414.516952] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:606:HDMI-A-2] disconnected
<7> [414.517508] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:610:DP-2]
<7> [414.517514] i915 0000:03:00.0: [drm:intel_dp_detect [i915]] [CONNECTOR:610:DP-2]
<7> [414.521723] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:610:DP-2] disconnected
<7> [414.522192] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:618:HDMI-A-3]
<7> [414.522197] i915 0000:03:00.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:618:HDMI-A-3]
<7> [414.526510] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:618:HDMI-A-3] disconnected
<7> [414.526981] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:622:DP-3]
<7> [414.526986] i915 0000:03:00.0: [drm:intel_dp_detect [i915]] [CONNECTOR:622:DP-3]
<7> [414.531201] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:622:DP-3] disconnected
<7> [414.531742] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:630:HDMI-A-4]
<7> [414.531747] i915 0000:03:00.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:630:HDMI-A-4]
<7> [414.535982] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:630:HDMI-A-4] disconnected
<7> [414.536753] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:587:DP-1]
<7> [414.536759] i915 0000:03:00.0: [drm:intel_dp_detect [i915]] [CONNECTOR:587:DP-1]
<7> [414.557882] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.578995] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.600129] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.621271] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.642411] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.663546] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.684694] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.705843] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.726989] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.748124] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.769283] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.790429] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.811577] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.832724] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.853869] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.875015] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.896218] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.917385] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.938535] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.959692] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [414.980841] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [415.001971] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [415.023143] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [415.044302] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [415.065440] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [415.086589] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [415.107737] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [415.128883] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [415.150034] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [415.171204] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [415.192355] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [415.213501] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [415.213679] i915 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110
<7> [415.213724] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:587:DP-1] disconnected
<7> [415.213745] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:599:HDMI-A-1]
<7> [415.213752] i915 0000:03:00.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:599:HDMI-A-1]
<7> [415.238109] i915 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:599:HDMI-A-1] ELD monitor FH-DP4K
<7> [415.238115] i915 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:599:HDMI-A-1] ELD size 36, SAD count 2
<7> [415.238318] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK for addr: 0040 w(1)
<7> [415.238501] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK on first message, retry
<7> [415.238806] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK for addr: 0040 w(1)
<7> [415.238975] i915 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [415.238988] i915 0000:03:00.0: [drm:intel_hdmi_set_edid [i915]] Assuming DP dual mode adaptor presence based on VBT
<7> [415.239150] i915 0000:03:00.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 1 DVI) detected (max TMDS clock: 165000 kHz)
<7> [415.239977] i915 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "2560x1440": 60 241700 2560 2608 2640 2720 1440 1443 1448 1481 0x40 0x9 (CLOCK_HIGH)
<7> [415.239986] i915 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "2560x1600": 60 267820 2560 2608 2640 2720 1600 1603 1608 1641 0x40 0x9 (CLOCK_HIGH)
<7> [415.239992] i915 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 120 297000 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 (CLOCK_HIGH)
<7> [415.239999] i915 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "3840x2160": 30 266640 3840 3888 3920 4000 2160 2163 2168 2222 0x40 0x9 (CLOCK_HIGH)
<7> [415.240005] i915 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 120 296703 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 (CLOCK_HIGH)
<7> [415.240013] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:599:HDMI-A-1] probed modes:
<7> [415.240017] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [415.240022] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 17 151100 3840 3888 3920 4000 2160 2163 2168 2222 0x40 0x9
<7> [415.240026] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 30 133910 2560 2608 2640 2720 1600 1603 1608 1641 0x40 0x9
<7> [415.240030] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 30 120850 2560 2608 2640 2720 1440 1443 1448 1481 0x40 0x9
<7> [415.240034] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x40 0x9
<7> [415.240038] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [415.240043] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
<7> [415.240047] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
<7> [415.240051] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [415.240055] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [415.240059] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
<7> [415.240064] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9
<7> [415.240068] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
<7> [415.240072] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [415.240076] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [415.240081] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
<7> [415.240085] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
<7> [415.240089] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [415.240093] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
<7> [415.240097] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
<7> [415.240102] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [415.240106] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [415.240110] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
<7> [415.240114] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa
<7> [415.240118] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
<7> [415.240122] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [415.240155] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:606:HDMI-A-2]
<7> [415.240160] i915 0000:03:00.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:606:HDMI-A-2]
<7> [415.244462] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:606:HDMI-A-2] disconnected
<7> [415.244480] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:610:DP-2]
<7> [415.244485] i915 0000:03:00.0: [drm:intel_dp_detect [i915]] [CONNECTOR:610:DP-2]
<7> [415.248684] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:610:DP-2] disconnected
<7> [415.248702] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:618:HDMI-A-3]
<7> [415.248706] i915 0000:03:00.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:618:HDMI-A-3]
<7> [415.252914] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:618:HDMI-A-3] disconnected
<7> [415.252931] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:622:DP-3]
<7> [415.252935] i915 0000:03:00.0: [drm:intel_dp_detect [i915]] [CONNECTOR:622:DP-3]
<7> [415.257136] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:622:DP-3] disconnected
<7> [415.257153] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:630:HDMI-A-4]
<7> [415.257157] i915 0000:03:00.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:630:HDMI-A-4]
<7> [415.261467] i915 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:630:HDMI-A-4] disconnected
<6> [415.262090] [IGT] kms_plane_scaling: starting subtest plane-upscale-20x20-with-modifiers
<6> [415.262912] [IGT] kms_plane_scaling: starting dynamic subtest pipe-A
<7> [415.264654] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK for addr: 003a w(1)
<7> [415.264819] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK on first message, retry
<7> [415.265111] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK for addr: 003a w(1)
<7> [415.265315] i915 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6)
<7> [415.265768] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK for addr: 003a w(1)
<7> [415.265931] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK on first message, retry
<7> [415.266222] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK for addr: 003a w(1)
<7> [415.266469] i915 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6)
<7> [415.266929] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK for addr: 003a w(1)
<7> [415.267085] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK on first message, retry
<7> [415.267391] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK for addr: 003a w(1)
<7> [415.267591] i915 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6)
<7> [415.268665] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:637]
<7> [415.270872] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1
<7> [415.271070] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [415.271225] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 1, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [415.271494] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 16, 81, 81, 81, 129, 129, 145, 161, 30, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [415.271666] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 19, 91, 91, 91, 143, 143, 161, 179, 31, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [415.271829] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:170:pipe A] attached scaler id 0.0 to PLANE:34
<7> [415.299302] i915 0000:03:00.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [415.299515] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:637] from all active usage due to RMFB ioctl
<7> [415.299565] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:637] is removed
<7> [415.299586] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0
<7> [415.299759] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [415.299913] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [415.300068] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.300223] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.300388] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.300637] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 0 num active planes 0
<7> [415.300795] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [415.315487] i915 0000:03:00.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:34:plane 1A]
<7> [415.316439] i915 0000:03:00.0: [drm:intel_power_well_disable [i915]] disabling AUX_A
<7> [415.332655] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:637]
<7> [415.332786] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1
<7> [415.333034] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [415.333259] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [415.333473] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [415.333685] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [415.333895] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [415.334130] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 594000 num active planes 1
<7> [415.334356] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [415.334571] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [415.334829] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:170:pipe A] attached scaler id 0.0 to PLANE:34
<7> [415.335855] i915 0000:03:00.0: [drm:intel_fbc_update [i915]] reserved 20480 bytes of contiguous stolen space for FBC, limit: 1
<7> [415.336083] i915 0000:03:00.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:34:plane 1A]
<7> [415.349092] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:637] from all active usage due to RMFB ioctl
<7> [415.349175] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:637] is removed
<7> [415.349211] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0
<7> [415.349525] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [415.349786] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [415.350041] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.350317] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.350577] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.350864] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 0 num active planes 0
<7> [415.351131] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [415.351372] i915 0000:03:00.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [415.351673] i915 0000:03:00.0: [drm:gen9_enable_dc5 [i915]] Enabling DC5
<7> [415.351944] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 01
<7> [415.352260] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [415.352532] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 01 to 00
<7> [415.365538] i915 0000:03:00.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:34:plane 1A]
<7> [415.383080] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:637]
<7> [415.383388] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1
<7> [415.383920] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [415.384411] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [415.384880] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [415.385363] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [415.385826] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [415.386367] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 594000 num active planes 1
<7> [415.386851] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [415.387341] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [415.387907] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:170:pipe A] attached scaler id 0.0 to PLANE:34
<7> [415.389929] i915 0000:03:00.0: [drm:intel_fbc_update [i915]] reserved 20480 bytes of contiguous stolen space for FBC, limit: 1
<7> [415.390431] i915 0000:03:00.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:34:plane 1A]
<7> [415.399388] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:637] from all active usage due to RMFB ioctl
<7> [415.399580] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:637] is removed
<7> [415.399658] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0
<7> [415.400502] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [415.400690] i915 0000:03:00.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [415.401300] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [415.401614] i915 0000:03:00.0: [drm:gen9_enable_dc5 [i915]] Enabling DC5
<7> [415.402065] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.402452] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 01
<7> [415.402901] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.403707] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.404607] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 0 num active planes 0
<7> [415.405486] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [415.407681] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [415.408516] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 01 to 00
<7> [415.415568] i915 0000:03:00.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:34:plane 1A]
<7> [415.433583] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:637]
<7> [415.434201] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.1: staged scaling request for 20x20->1920x1080 scaler_users = 0x2
<7> [415.435284] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:64:plane 2A] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [415.436168] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [415.437074] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [415.438054] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [415.438956] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [415.439939] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 594000 num active planes 1
<7> [415.440857] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [415.441769] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [415.442849] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:170:pipe A] attached scaler id 0.0 to PLANE:64
<7> [415.449607] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:637] from all active usage due to RMFB ioctl
<7> [415.449888] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:64:plane 2A] because [FB:637] is removed
<7> [415.449999] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0
<7> [415.451052] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:64:plane 2A] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [415.451233] i915 0000:03:00.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [415.451979] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [415.452307] i915 0000:03:00.0: [drm:gen9_enable_dc5 [i915]] Enabling DC5
<7> [415.452880] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.453222] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 01
<7> [415.453788] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.454675] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.455813] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 0 num active planes 0
<7> [415.456737] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [415.459167] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [415.460131] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 01 to 00
<7> [415.466957] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:637]
<7> [415.467570] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.1: staged scaling request for 20x20->1920x1080 scaler_users = 0x2
<7> [415.468636] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:64:plane 2A] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [415.469540] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [415.470418] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [415.471308] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [415.472177] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [415.473504] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.1: staged scaling request for 20x20->1920x1080 scaler_users = 0x2
<7> [415.474461] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:64:plane 2A] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [415.475359] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [415.476222] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [415.477112] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [415.478015] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [415.478963] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 594000 num active planes 1
<7> [415.479877] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [415.480781] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [415.481860] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:170:pipe A] attached scaler id 0.0 to PLANE:64
<7> [415.485553] i915 0000:03:00.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [415.486575] i915 0000:03:00.0: [drm:gen9_enable_dc5 [i915]] Enabling DC5
<7> [415.487500] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 01
<7> [415.488512] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [415.489474] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 01 to 00
<7> [415.499409] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:637] from all active usage due to RMFB ioctl
<7> [415.499590] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:64:plane 2A] because [FB:637] is removed
<7> [415.499667] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0
<7> [415.500382] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:64:plane 2A] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [415.500962] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [415.501563] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.502148] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.502750] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.503427] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 0 num active planes 0
<7> [415.504020] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [415.516283] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:637]
<7> [415.516546] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.1: staged scaling request for 20x20->1920x1080 scaler_users = 0x2
<7> [415.517030] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:64:plane 2A] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [415.517393] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [415.517743] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [415.518091] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [415.518460] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [415.518952] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.1: staged scaling request for 20x20->1920x1080 scaler_users = 0x2
<7> [415.519340] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:64:plane 2A] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [415.519688] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [415.520031] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [415.520388] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [415.520732] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [415.521185] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.1: staged scaling request for 20x20->1920x1080 scaler_users = 0x2
<7> [415.521568] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:64:plane 2A] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [415.521915] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [415.522276] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [415.522624] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [415.522973] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [415.523396] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 594000 num active planes 1
<7> [415.523752] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [415.524104] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [415.524537] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:170:pipe A] attached scaler id 0.0 to PLANE:64
<7> [415.532411] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:637] from all active usage due to RMFB ioctl
<7> [415.532503] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:64:plane 2A] because [FB:637] is removed
<7> [415.532541] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0
<7> [415.532874] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:64:plane 2A] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [415.533138] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [415.533412] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] lines 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.533508] i915 0000:03:00.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [415.533660] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] blocks 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.533798] i915 0000:03:00.0: [drm:gen9_enable_dc5 [i915]] Enabling DC5
<7> [415.533910] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] min_ddb 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.534061] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 01
<7> [415.534185] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 0 num active planes 0
<7> [415.534449] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [415.535139] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [415.535411] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 01 to 00
<7> [415.549123] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:637]
<7> [415.549281] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.2: staged scaling request for 20x20->1920x1080 scaler_users = 0x4
<7> [415.549508] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:94:plane 3A] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [415.549703] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [415.549895] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [415.550087] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [415.550291] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [415.550573] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.2: staged scaling request for 20x20->1920x1080 scaler_users = 0x4
<7> [415.550783] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:94:plane 3A] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [415.550976] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [415.551168] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [415.551372] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [415.551564] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [415.551834] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.2: staged scaling request for 20x20->1920x1080 scaler_users = 0x4
<7> [415.552041] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:94:plane 3A] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [415.552233] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [415.552436] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [415.552630] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [415.552822] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [415.553027] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 594000 num active planes 1
<7> [415.553227] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [415.553455] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [415.553692] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:170:pipe A] attached scaler id 0.0 to PLANE:94
<7> [415.565636] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:637] from all active usage due to RMFB ioctl
<7> [415.565689] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:94:plane 3A] because [FB:637] is removed
<7> [415.565711] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0
<7> [415.565903] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:94:plane 3A] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [415.566065] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [415.566228] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.566404] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.566499] i915 0000:03:00.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [415.566566] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.566695] i915 0000:03:00.0: [drm:gen9_enable_dc5 [i915]] Enabling DC5
<7> [415.566746] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 0 num active planes 0
<7> [415.566867] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 01
<7> [415.566913] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [415.567382] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [415.567556] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 01 to 00
<7> [415.582529] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:637]
<7> [415.582631] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.2: staged scaling request for 20x20->1920x1080 scaler_users = 0x4
<7> [415.582822] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:94:plane 3A] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [415.582988] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [415.583148] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [415.583322] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [415.583484] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [415.583664] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 594000 num active planes 1
<7> [415.583832] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [415.583996] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [415.584194] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:170:pipe A] attached scaler id 0.0 to PLANE:94
<7> [415.599046] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:637] from all active usage due to RMFB ioctl
<7> [415.599098] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:94:plane 3A] because [FB:637] is removed
<7> [415.599120] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0
<7> [415.599328] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:94:plane 3A] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [415.599491] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [415.599652] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.599814] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.599974] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.600153] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 0 num active planes 0
<7> [415.600329] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [415.600372] i915 0000:03:00.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [415.600573] i915 0000:03:00.0: [drm:gen9_enable_dc5 [i915]] Enabling DC5
<7> [415.600745] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 01
<7> [415.600942] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [415.601114] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 01 to 00
<7> [415.615797] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:637]
<7> [415.615897] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.2: staged scaling request for 20x20->1920x1080 scaler_users = 0x4
<7> [415.616090] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:94:plane 3A] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [415.616262] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [415.616423] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [415.616585] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [415.616757] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [415.616946] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 594000 num active planes 1
<7> [415.617114] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [415.617291] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [415.617501] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:170:pipe A] attached scaler id 0.0 to PLANE:94
<7> [415.632433] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:637] from all active usage due to RMFB ioctl
<7> [415.632492] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:94:plane 3A] because [FB:637] is removed
<7> [415.632518] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0
<7> [415.632726] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:94:plane 3A] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [415.632889] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [415.633050] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] lines 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.633212] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] blocks 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.633393] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] min_ddb 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.633477] i915 0000:03:00.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [415.633577] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 0 num active planes 0
<7> [415.633674] i915 0000:03:00.0: [drm:gen9_enable_dc5 [i915]] Enabling DC5
<7> [415.633744] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [415.633845] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 01
<7> [415.634231] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [415.634418] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 01 to 00
<7> [415.649189] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:637]
<7> [415.649333] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.3: staged scaling request for 20x20->1920x1080 scaler_users = 0x8
<7> [415.649533] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:124:plane 4A] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [415.649696] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [415.649858] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [415.650021] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [415.650181] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [415.650372] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 594000 num active planes 1
<7> [415.650539] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [415.650704] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [415.650903] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:170:pipe A] attached scaler id 0.0 to PLANE:124
<7> [415.665649] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:637] from all active usage due to RMFB ioctl
<7> [415.665703] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:124:plane 4A] because [FB:637] is removed
<7> [415.665726] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0
<7> [415.665916] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:124:plane 4A] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [415.666077] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [415.666255] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.666323] i915 0000:03:00.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [415.666416] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.666520] i915 0000:03:00.0: [drm:gen9_enable_dc5 [i915]] Enabling DC5
<7> [415.666576] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.666691] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 01
<7> [415.666756] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 0 num active planes 0
<7> [415.666938] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [415.667434] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [415.667621] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 01 to 00
<7> [415.682559] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:637]
<7> [415.682675] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.3: staged scaling request for 20x20->1920x1080 scaler_users = 0x8
<7> [415.682897] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:124:plane 4A] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [415.683089] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [415.683300] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [415.683489] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [415.683677] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [415.683887] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 594000 num active planes 1
<7> [415.684081] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [415.684282] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [415.684513] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:170:pipe A] attached scaler id 0.0 to PLANE:124
<7> [415.699058] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:637] from all active usage due to RMFB ioctl
<7> [415.699125] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:124:plane 4A] because [FB:637] is removed
<7> [415.699153] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0
<7> [415.699407] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:124:plane 4A] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [415.699612] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [415.699817] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.700024] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.700240] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.700467] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 0 num active planes 0
<7> [415.700678] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [415.715927] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:637]
<7> [415.716052] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.3: staged scaling request for 20x20->1920x1080 scaler_users = 0x8
<7> [415.716310] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:124:plane 4A] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [415.716518] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [415.716723] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [415.716944] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [415.717166] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [415.717429] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 594000 num active planes 1
<7> [415.717662] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [415.717888] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [415.718159] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:170:pipe A] attached scaler id 0.0 to PLANE:124
<7> [415.732429] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:637] from all active usage due to RMFB ioctl
<7> [415.732511] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:124:plane 4A] because [FB:637] is removed
<7> [415.732545] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0
<7> [415.732831] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:124:plane 4A] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [415.733080] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [415.733340] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] lines 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.733589] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] blocks 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.733837] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] min_ddb 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.734112] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 0 num active planes 0
<7> [415.734386] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [415.749273] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:637]
<7> [415.749478] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.4: staged scaling request for 20x20->1920x1080 scaler_users = 0x10
<7> [415.749767] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:134:plane 5A] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [415.750017] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [415.750282] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [415.750533] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [415.750784] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [415.751144] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.4: staged scaling request for 20x20->1920x1080 scaler_users = 0x10
<7> [415.751468] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:134:plane 5A] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [415.751717] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [415.751964] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [415.752217] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [415.752475] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [415.752736] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 594000 num active planes 1
<7> [415.752989] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [415.753252] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [415.753556] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:170:pipe A] attached scaler id 0.0 to PLANE:134
<7> [415.765756] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:637] from all active usage due to RMFB ioctl
<7> [415.765834] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:134:plane 5A] because [FB:637] is removed
<7> [415.765867] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0
<7> [415.766151] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:134:plane 5A] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [415.766417] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [415.766668] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.766916] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.767167] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.767472] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 0 num active planes 0
<7> [415.767728] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [415.782663] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:637]
<7> [415.782813] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.4: staged scaling request for 20x20->1920x1080 scaler_users = 0x10
<7> [415.783100] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:134:plane 5A] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [415.783371] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [415.783618] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [415.783866] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [415.784113] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [415.784473] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.4: staged scaling request for 20x20->1920x1080 scaler_users = 0x10
<7> [415.784741] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:134:plane 5A] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [415.784990] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [415.785250] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [415.785500] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [415.785748] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [415.786071] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.4: staged scaling request for 20x20->1920x1080 scaler_users = 0x10
<7> [415.786352] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:134:plane 5A] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [415.786602] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [415.786848] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [415.787095] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [415.787351] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [415.787611] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 594000 num active planes 1
<7> [415.787865] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [415.788116] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [415.788428] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:170:pipe A] attached scaler id 0.0 to PLANE:134
<7> [415.789311] i915 0000:03:00.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [415.789604] i915 0000:03:00.0: [drm:gen9_enable_dc5 [i915]] Enabling DC5
<7> [415.789864] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 01
<7> [415.790157] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [415.790470] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 01 to 00
<7> [415.799034] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:637] from all active usage due to RMFB ioctl
<7> [415.799113] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:134:plane 5A] because [FB:637] is removed
<7> [415.799147] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0
<7> [415.799451] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:134:plane 5A] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [415.799702] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [415.799950] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.800199] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.800476] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.800751] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 0 num active planes 0
<7> [415.801008] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [415.815836] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:637]
<7> [415.815943] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.4: staged scaling request for 20x20->1920x1080 scaler_users = 0x10
<7> [415.816150] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:134:plane 5A] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [415.816338] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [415.816512] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [415.816689] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [415.816864] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [415.817058] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 594000 num active planes 1
<7> [415.817248] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [415.817427] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [415.817639] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:170:pipe A] attached scaler id 0.0 to PLANE:134
<7> [415.832390] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:637] from all active usage due to RMFB ioctl
<7> [415.832446] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:134:plane 5A] because [FB:637] is removed
<7> [415.832470] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0
<7> [415.832675] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:134:plane 5A] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [415.832851] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [415.833024] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] lines 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.833197] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] blocks 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.833386] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] min_ddb 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.833481] i915 0000:03:00.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [415.833579] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 0 num active planes 0
<7> [415.833693] i915 0000:03:00.0: [drm:gen9_enable_dc5 [i915]] Enabling DC5
<7> [415.833759] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [415.833879] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 01
<7> [415.834280] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [415.834464] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 01 to 00
<7> [415.849261] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:637]
<7> [415.849394] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.5: staged scaling request for 20x20->1920x1080 scaler_users = 0x20
<7> [415.849601] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:144:plane 6A] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [415.849775] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [415.849947] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [415.850124] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [415.850310] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [415.850506] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 594000 num active planes 1
<7> [415.850685] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [415.850860] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [415.851072] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:170:pipe A] attached scaler id 0.0 to PLANE:144
<7> [415.865660] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:637] from all active usage due to RMFB ioctl
<7> [415.865716] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:144:plane 6A] because [FB:637] is removed
<7> [415.865740] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.5: Staged freeing scaler id 0 scaler_users = 0x0
<7> [415.865945] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:144:plane 6A] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [415.866120] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:plane 6A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [415.866308] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:plane 6A] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.866404] i915 0000:03:00.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [415.866483] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:plane 6A] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.866614] i915 0000:03:00.0: [drm:gen9_enable_dc5 [i915]] Enabling DC5
<7> [415.866655] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:plane 6A] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.866799] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 01
<7> [415.866849] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 0 num active planes 0
<7> [415.867030] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [415.867551] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [415.867736] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 01 to 00
<7> [415.882543] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:637]
<7> [415.882650] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.5: staged scaling request for 20x20->1920x1080 scaler_users = 0x20
<7> [415.882854] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:144:plane 6A] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [415.883030] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [415.883207] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [415.883394] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [415.883568] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [415.883763] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 594000 num active planes 1
<7> [415.883941] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [415.884116] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [415.884338] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:170:pipe A] attached scaler id 0.0 to PLANE:144
<7> [415.899047] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:637] from all active usage due to RMFB ioctl
<7> [415.899103] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:144:plane 6A] because [FB:637] is removed
<7> [415.899126] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.5: Staged freeing scaler id 0 scaler_users = 0x0
<7> [415.899340] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:144:plane 6A] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [415.899519] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:plane 6A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [415.899692] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:plane 6A] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.899867] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:plane 6A] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.900039] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:plane 6A] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.900243] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 0 num active planes 0
<7> [415.900316] i915 0000:03:00.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [415.900421] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [415.900524] i915 0000:03:00.0: [drm:gen9_enable_dc5 [i915]] Enabling DC5
<7> [415.900709] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 01
<7> [415.900922] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [415.901111] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 01 to 00
<7> [415.915834] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:637]
<7> [415.915942] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.5: staged scaling request for 20x20->1920x1080 scaler_users = 0x20
<7> [415.916149] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:144:plane 6A] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [415.916339] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [415.916514] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [415.916688] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [415.916864] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [415.917083] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 594000 num active planes 1
<7> [415.917289] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [415.917479] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [415.917709] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:170:pipe A] attached scaler id 0.0 to PLANE:144
<7> [415.932401] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:637] from all active usage due to RMFB ioctl
<7> [415.932469] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:144:plane 6A] because [FB:637] is removed
<7> [415.932496] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.5: Staged freeing scaler id 0 scaler_users = 0x0
<7> [415.932734] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:144:plane 6A] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [415.932937] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:plane 6A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [415.933138] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:plane 6A] lines 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.933361] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:plane 6A] blocks 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.933459] i915 0000:03:00.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [415.933568] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:plane 6A] min_ddb 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.933704] i915 0000:03:00.0: [drm:gen9_enable_dc5 [i915]] Enabling DC5
<7> [415.933794] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 0 num active planes 0
<7> [415.933920] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 01
<7> [415.934002] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [415.934834] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [415.935056] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 01 to 00
<7> [415.949670] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:637]
<7> [415.949823] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.6: staged scaling request for 20x20->1920x1080 scaler_users = 0x40
<7> [415.950064] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:154:plane 7A] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [415.950284] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:154:plane 7A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [415.950488] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:154:plane 7A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [415.950694] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:154:plane 7A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [415.950900] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:154:plane 7A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [415.951128] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 594000 num active planes 1
<7> [415.951350] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [415.951561] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [415.951810] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:170:pipe A] attached scaler id 0.0 to PLANE:154
<7> [415.965742] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:637] from all active usage due to RMFB ioctl
<7> [415.965810] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 7A] because [FB:637] is removed
<7> [415.965838] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.6: Staged freeing scaler id 0 scaler_users = 0x0
<7> [415.966076] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:154:plane 7A] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [415.966298] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:154:plane 7A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [415.966394] i915 0000:03:00.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [415.966504] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:154:plane 7A] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.966636] i915 0000:03:00.0: [drm:gen9_enable_dc5 [i915]] Enabling DC5
<7> [415.966709] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:154:plane 7A] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.966850] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 01
<7> [415.966913] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:154:plane 7A] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [415.967141] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 0 num active planes 0
<7> [415.967369] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [415.967968] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [415.968185] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 01 to 00
<7> [415.982579] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:637]
<7> [415.982704] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.6: staged scaling request for 20x20->1920x1080 scaler_users = 0x40
<7> [415.982942] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:154:plane 7A] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [415.983147] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:154:plane 7A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [415.983367] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:154:plane 7A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [415.983574] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:154:plane 7A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [415.983777] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:154:plane 7A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [415.984006] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 594000 num active planes 1
<7> [415.984229] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [415.984439] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [415.984690] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:170:pipe A] attached scaler id 0.0 to PLANE:154
<7> [415.999065] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:637] from all active usage due to RMFB ioctl
<7> [415.999133] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 7A] because [FB:637] is removed
<7> [415.999161] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.6: Staged freeing scaler id 0 scaler_users = 0x0
<7> [415.999412] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:154:plane 7A] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [415.999618] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:154:plane 7A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [415.999821] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:154:plane 7A] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.000026] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:154:plane 7A] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.000235] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:154:plane 7A] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.000465] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 0 num active planes 0
<7> [416.000679] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [416.015927] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:637]
<7> [416.016070] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.6: staged scaling request for 20x20->1920x1080 scaler_users = 0x40
<7> [416.016325] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:154:plane 7A] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.016531] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:154:plane 7A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.016734] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:154:plane 7A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.016939] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:154:plane 7A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [416.017144] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:154:plane 7A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [416.017437] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.6: staged scaling request for 20x20->1920x1080 scaler_users = 0x40
<7> [416.017655] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:154:plane 7A] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.017858] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:154:plane 7A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.018059] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:154:plane 7A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.018270] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:154:plane 7A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [416.018475] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:154:plane 7A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [416.018690] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 594000 num active planes 1
<7> [416.018901] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [416.019108] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [416.019365] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:170:pipe A] attached scaler id 0.0 to PLANE:154
<7> [416.032430] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:637] from all active usage due to RMFB ioctl
<7> [416.032494] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 7A] because [FB:637] is removed
<7> [416.032522] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:170:pipe A] scaler_user index 0.6: Staged freeing scaler id 0 scaler_users = 0x0
<7> [416.032761] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:154:plane 7A] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [416.032967] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:154:plane 7A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [416.033172] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:154:plane 7A] lines 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.033391] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:154:plane 7A] blocks 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.033490] i915 0000:03:00.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [416.033595] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:154:plane 7A] min_ddb 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.033732] i915 0000:03:00.0: [drm:gen9_enable_dc5 [i915]] Enabling DC5
<7> [416.033825] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 0 num active planes 0
<7> [416.033952] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 01
<7> [416.034034] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [416.034636] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [416.034853] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 01 to 00
<6> [416.049853] [IGT] kms_plane_scaling: finished subtest pipe-A, SUCCESS
<6> [416.050829] [IGT] kms_plane_scaling: starting dynamic subtest pipe-B
<7> [416.052863] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK for addr: 003a w(1)
<7> [416.053081] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK on first message, retry
<7> [416.053436] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK for addr: 003a w(1)
<7> [416.053645] i915 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6)
<7> [416.054161] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK for addr: 003a w(1)
<7> [416.054367] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK on first message, retry
<7> [416.054709] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK for addr: 003a w(1)
<7> [416.054918] i915 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6)
<7> [416.055438] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK for addr: 003a w(1)
<7> [416.055637] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK on first message, retry
<7> [416.055976] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK for addr: 003a w(1)
<7> [416.056181] i915 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6)
<7> [416.057541] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:637]
<7> [416.060174] i915 0000:03:00.0: [drm:intel_atomic_check [i915]] [CONNECTOR:599:HDMI-A-1] Limiting display bpp to 24 (EDID bpp 0, max requested bpp 36, max platform bpp 36)
<7> [416.060406] i915 0000:03:00.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24)
<7> [416.060602] i915 0000:03:00.0: [drm:intel_atomic_check [i915]] [CRTC:308:pipe B] hw max bpp: 24, pipe bpp: 24, dithering: 0
<7> [416.060815] i915 0000:03:00.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:586:DDI A/PHY A] [CRTC:308:pipe B]
<7> [416.061017] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.enable (expected yes, found no)
<7> [416.061235] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.active (expected yes, found no)
<7> [416.061448] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)
<7> [416.061661] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in lane_count (expected 4, found 0)
<7> [416.061871] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000)
<7> [416.062081] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [416.062317] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)
<7> [416.062529] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2200, found 0)
<7> [416.062739] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)
<7> [416.062950] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2200, found 0)
<7> [416.063159] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0)
<7> [416.063379] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2052, found 0)
<7> [416.063590] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)
<7> [416.063801] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)
<7> [416.064010] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0)
<7> [416.064228] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0)
<7> [416.064438] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0)
<7> [416.064651] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0)
<7> [416.064860] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)
<7> [416.065069] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2200, found 0)
<7> [416.065285] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)
<7> [416.065495] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2200, found 0)
<7> [416.065705] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0)
<7> [416.065916] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2052, found 0)
<7> [416.066125] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)
<7> [416.066345] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)
<7> [416.066401] i915 0000:03:00.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [416.066555] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0)
<7> [416.066643] i915 0000:03:00.0: [drm:gen9_enable_dc5 [i915]] Enabling DC5
<7> [416.066765] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0)
<7> [416.066858] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 01
<7> [416.066975] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0)
<7> [416.067185] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0)
<7> [416.067401] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [416.067614] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)
<7> [416.067824] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)
<7> [416.068039] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)
<7> [416.068257] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 148500, found 0)
<7> [416.068467] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 148500, found 0)
<7> [416.068676] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in port_clock (expected 148500, found 0)
<7> [416.068886] i915 0000:03:00.0: [drm:intel_atomic_check [i915]] [CRTC:170:pipe A] fastset requirement not met, forcing full modeset
<7> [416.069098] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.enable (expected no, found yes)
<7> [416.069313] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.active (expected no, found yes)
<7> [416.069525] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in cpu_transcoder (expected -1, found 1)
<7> [416.069737] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in lane_count (expected 0, found 4)
<7> [416.069948] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040)
<7> [416.070160] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [416.070378] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)
<7> [416.070591] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2200)
<7> [416.070804] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)
<7> [416.071016] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2200)
<7> [416.071232] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008)
<7> [416.071443] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2052)
<7> [416.071652] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)
<7> [416.071862] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)
<7> [416.072074] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084)
<7> [416.072337] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089)
<7> [416.072549] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125)
<7> [416.072762] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125)
<7> [416.072971] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)
<7> [416.073183] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2200)
<7> [416.073403] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)
<7> [416.073614] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2200)
<7> [416.073824] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008)
<7> [416.074035] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2052)
<7> [416.074255] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)
<7> [416.074465] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)
<7> [416.074678] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084)
<7> [416.074890] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089)
<7> [416.075100] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125)
<7> [416.075322] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125)
<7> [416.075533] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [416.075743] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)
<7> [416.075953] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)
<7> [416.076163] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in pipe_bpp (expected 0, found 24)
<7> [416.076381] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 148500)
<7> [416.076593] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 148500)
<7> [416.076803] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in port_clock (expected 0, found 148500)
<7> [416.077016] i915 0000:03:00.0: [drm:intel_atomic_check [i915]] [CRTC:308:pipe B] fastset requirement not met, forcing full modeset
<7> [416.077205] i915 0000:03:00.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:170:pipe A] releasing DPLL 0
<7> [416.077416] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.8: staged scaling request for 20x20->1920x1080 scaler_users = 0x100
<7> [416.077632] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [CRTC:170:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x2
<7> [416.077815] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [CRTC:308:pipe B] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x2
<7> [416.078002] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:164:cursor A] ddb (2012 - 2048) -> ( 0 - 0), size 36 -> 0
<7> [416.078184] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:172:plane 1B] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.078371] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:302:cursor B] ddb ( 0 - 0) -> (2012 - 2048), size 0 -> 36
<7> [416.078553] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:172:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.078735] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:172:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.078917] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:172:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [416.079101] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:172:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [416.079320] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 594000 num active planes 1
<7> [416.079510] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [416.079695] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [416.079901] i915 0000:03:00.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:170:pipe A] min cdclk: 74250 kHz -> 0 kHz
<7> [416.080087] i915 0000:03:00.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:308:pipe B] min cdclk: 0 kHz -> 74250 kHz
<7> [416.080305] i915 0000:03:00.0: [drm:intel_find_dpll [i915]] [CRTC:308:pipe B] allocated DPLL 0
<7> [416.080494] i915 0000:03:00.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:308:pipe B] reserving DPLL 0
<7> [416.080683] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:308:pipe B] attached scaler id 1.0 to PLANE:172
<7> [416.080870] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [CRTC:170:pipe A] enable: no [modeset]
<7> [416.081061] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no
<7> [416.081254] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 2A] fb: [NOFB], visible: no
<7> [416.081442] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 3A] fb: [NOFB], visible: no
<7> [416.081629] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:124:plane 4A] fb: [NOFB], visible: no
<7> [416.081816] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:134:plane 5A] fb: [NOFB], visible: no
<7> [416.082012] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:144:plane 6A] fb: [NOFB], visible: no
<7> [416.082181] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:154:plane 7A] fb: [NOFB], visible: no
<7> [416.082356] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:164:cursor A] fb: [NOFB], visible: no
<7> [416.082525] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [CRTC:308:pipe B] enable: yes [modeset]
<7> [416.082694] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB
<7> [416.082864] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: B, pipe bpp: 24, dithering: 0
<7> [416.083033] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>
<7> [416.083203] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [416.083379] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0
<7> [416.083549] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0
<7> [416.083717] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7> [416.083885] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2
<7> [416.084056] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [416.084231] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 42, guardband: 44 vsync start: 0, vsync end: 0
<7> [416.084400] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1125, vmax vtotal: 1125
<7> [416.084569] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [416.084741] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [416.084913] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [416.085082] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5
<7> [416.085258] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [416.085428] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5
<7> [416.085599] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] port clock: 148500, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 74250
<7> [416.085769] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] linetime: 119, ips linetime: 0
<7> [416.085940] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x100, scaler_id: -1, scaling_filter: 0
<7> [416.086109] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [416.086284] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0
<7> [416.086454] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1001d0, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0
<7> [416.086625] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [416.086793] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [416.086974] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [416.087136] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [416.087340] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [416.087503] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [416.087665] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [416.087826] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [416.087988] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [416.088149] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [416.088352] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [416.088514] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [416.088676] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [416.088839] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:172:plane 1B] fb: [FB:637] 20x20 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [416.089002] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: 0, scaling_filter: 0
<7> [416.089164] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] src: 20.000000x20.000000+0.000000+0.000000 dst: 1920x1080+0+0
<7> [416.089366] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:202:plane 2B] fb: [NOFB], visible: no
<7> [416.089530] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:232:plane 3B] fb: [NOFB], visible: no
<7> [416.089691] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:262:plane 4B] fb: [NOFB], visible: no
<7> [416.089854] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:272:plane 5B] fb: [NOFB], visible: no
<7> [416.090015] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:282:plane 6B] fb: [NOFB], visible: no
<7> [416.090176] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:292:plane 7B] fb: [NOFB], visible: no
<7> [416.090377] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:302:cursor B] fb: [NOFB], visible: no
<7> [416.091084] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [416.091302] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 01 to 00
<7> [416.091668] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [416.091840] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling PW_3
<7> [416.092092] i915 0000:03:00.0: [drm:intel_disable_transcoder [i915]] disabling pipe A
<7> [416.099316] i915 0000:03:00.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A
<7> [416.099523] i915 0000:03:00.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:170:pipe A]
<7> [416.099719] i915 0000:03:00.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0
<7> [416.099904] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:586:DDI A/PHY A]
<7> [416.100065] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:588:DP-MST A]
<7> [416.100263] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:589:DP-MST B]
<7> [416.100438] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:590:DP-MST C]
<7> [416.100599] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:591:DP-MST D]
<7> [416.100760] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:605:DDI B/PHY B]
<7> [416.100922] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:609:DDI TC1/PHY C]
<7> [416.101082] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:611:DP-MST A]
<7> [416.101281] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:612:DP-MST B]
<7> [416.101443] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:613:DP-MST C]
<7> [416.101603] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:614:DP-MST D]
<7> [416.101763] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:621:DDI TC2/PHY D]
<7> [416.101922] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:623:DP-MST A]
<7> [416.102082] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:624:DP-MST B]
<7> [416.102282] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:625:DP-MST C]
<7> [416.102444] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:626:DP-MST D]
<7> [416.102605] i915 0000:03:00.0: [drm:verify_connector_state [i915]] [CONNECTOR:587:DP-1]
<7> [416.102803] i915 0000:03:00.0: [drm:verify_connector_state [i915]] [CONNECTOR:606:HDMI-A-2]
<7> [416.103000] i915 0000:03:00.0: [drm:verify_connector_state [i915]] [CONNECTOR:610:DP-2]
<7> [416.103196] i915 0000:03:00.0: [drm:verify_connector_state [i915]] [CONNECTOR:618:HDMI-A-3]
<7> [416.103432] i915 0000:03:00.0: [drm:verify_connector_state [i915]] [CONNECTOR:622:DP-3]
<7> [416.103629] i915 0000:03:00.0: [drm:verify_connector_state [i915]] [CONNECTOR:630:HDMI-A-4]
<7> [416.103912] i915 0000:03:00.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x2, on? 0) for [CRTC:308:pipe B]
<7> [416.104077] i915 0000:03:00.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0
<7> [416.104341] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A
<7> [416.104581] i915 0000:03:00.0: [drm:intel_enable_transcoder [i915]] enabling pipe B
<7> [416.122523] i915 0000:03:00.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:170:pipe A]
<7> [416.123157] i915 0000:03:00.0: [drm:verify_connector_state [i915]] [CONNECTOR:599:HDMI-A-1]
<7> [416.123441] i915 0000:03:00.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:308:pipe B]
<7> [416.125051] i915 0000:03:00.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe B
<7> [416.125254] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:637] from all active usage due to RMFB ioctl
<7> [416.125306] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:172:plane 1B] because [FB:637] is removed
<7> [416.125332] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0
<7> [416.125511] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:172:plane 1B] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [416.125668] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:172:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [416.125826] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:172:plane 1B] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.125984] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:172:plane 1B] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.126144] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:172:plane 1B] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.126326] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 0 num active planes 0
<7> [416.126488] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [416.139452] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:638]
<7> [416.139555] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.8: staged scaling request for 20x20->1920x1080 scaler_users = 0x100
<7> [416.139744] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:172:plane 1B] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.139902] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:172:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.140060] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:172:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.140252] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:172:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [416.140425] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:172:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [416.140647] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.8: staged scaling request for 20x20->1920x1080 scaler_users = 0x100
<7> [416.140815] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:172:plane 1B] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.140972] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:172:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.141128] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:172:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.141359] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:172:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [416.141519] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:172:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [416.141733] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.8: staged scaling request for 20x20->1920x1080 scaler_users = 0x100
<7> [416.141902] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:172:plane 1B] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.142059] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:172:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.142245] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:172:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.142420] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:172:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [416.142581] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:172:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [416.142748] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 594000 num active planes 1
<7> [416.142908] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [416.143071] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [416.143310] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:308:pipe B] attached scaler id 1.0 to PLANE:172
<7> [416.156042] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl
<7> [416.156094] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:172:plane 1B] because [FB:638] is removed
<7> [416.156116] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0
<7> [416.156354] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:172:plane 1B] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [416.156513] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:172:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [416.156673] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:172:plane 1B] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.156833] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:172:plane 1B] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.156991] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:172:plane 1B] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.157167] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 0 num active planes 0
<7> [416.157370] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [416.172774] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:638]
<7> [416.172874] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.8: staged scaling request for 20x20->1920x1080 scaler_users = 0x100
<7> [416.173061] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:172:plane 1B] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.173260] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:172:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.173432] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:172:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.173589] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:172:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [416.173751] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:172:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [416.173930] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 594000 num active planes 1
<7> [416.174093] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [416.174293] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [416.174487] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:308:pipe B] attached scaler id 1.0 to PLANE:172
<7> [416.189384] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl
<7> [416.189435] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:172:plane 1B] because [FB:638] is removed
<7> [416.189458] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0
<7> [416.189645] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:172:plane 1B] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [416.189803] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:172:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [416.189962] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:172:plane 1B] lines 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.190120] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:172:plane 1B] blocks 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.190287] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:172:plane 1B] min_ddb 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.190463] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 0 num active planes 0
<7> [416.190627] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [416.206227] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:638]
<7> [416.206348] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.9: staged scaling request for 20x20->1920x1080 scaler_users = 0x200
<7> [416.206531] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:202:plane 2B] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.206689] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:202:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.206848] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:202:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.207005] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:202:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [416.207162] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:202:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [416.207350] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 594000 num active planes 1
<7> [416.207512] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [416.207673] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [416.207866] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:308:pipe B] attached scaler id 1.0 to PLANE:202
<7> [416.222633] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl
<7> [416.222686] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:202:plane 2B] because [FB:638] is removed
<7> [416.222710] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0
<7> [416.222904] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:202:plane 2B] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [416.223075] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:202:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [416.223259] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:202:plane 2B] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.223431] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:202:plane 2B] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.223601] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:202:plane 2B] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.223790] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 0 num active planes 0
<7> [416.223967] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [416.239542] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:638]
<7> [416.239656] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.9: staged scaling request for 20x20->1920x1080 scaler_users = 0x200
<7> [416.239872] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:202:plane 2B] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.240058] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:202:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.240254] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:202:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.240438] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:202:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [416.240622] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:202:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [416.240827] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 594000 num active planes 1
<7> [416.241015] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [416.241202] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [416.241432] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:308:pipe B] attached scaler id 1.0 to PLANE:202
<7> [416.256050] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl
<7> [416.256114] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:202:plane 2B] because [FB:638] is removed
<7> [416.256141] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0
<7> [416.256386] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:202:plane 2B] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [416.256588] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:202:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [416.256786] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:202:plane 2B] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.257011] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:202:plane 2B] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.257235] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:202:plane 2B] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.257479] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 0 num active planes 0
<7> [416.257701] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [416.272961] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:638]
<7> [416.273107] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.9: staged scaling request for 20x20->1920x1080 scaler_users = 0x200
<7> [416.273409] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:202:plane 2B] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.273649] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:202:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.273888] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:202:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.274128] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:202:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [416.274380] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:202:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [416.274647] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 594000 num active planes 1
<7> [416.274892] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [416.275137] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [416.275445] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:308:pipe B] attached scaler id 1.0 to PLANE:202
<7> [416.289411] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl
<7> [416.289491] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:202:plane 2B] because [FB:638] is removed
<7> [416.289524] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0
<7> [416.289802] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:202:plane 2B] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [416.290042] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:202:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [416.290305] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:202:plane 2B] lines 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.290548] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:202:plane 2B] blocks 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.290788] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:202:plane 2B] min_ddb 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.291054] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 0 num active planes 0
<7> [416.291319] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [416.306248] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:638]
<7> [416.306427] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.10: staged scaling request for 20x20->1920x1080 scaler_users = 0x400
<7> [416.306709] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:232:plane 3B] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.306949] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:232:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.307187] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:232:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.307444] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:232:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [416.307683] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:232:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [416.307949] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 594000 num active planes 1
<7> [416.308198] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [416.308451] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [416.308750] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:308:pipe B] attached scaler id 1.0 to PLANE:232
<7> [416.322741] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl
<7> [416.322821] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:232:plane 3B] because [FB:638] is removed
<7> [416.322853] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0
<7> [416.323129] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:232:plane 3B] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [416.323390] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:232:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [416.323629] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:232:plane 3B] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.323871] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:232:plane 3B] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.324110] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:232:plane 3B] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.324391] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 0 num active planes 0
<7> [416.324635] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [416.339617] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:638]
<7> [416.339762] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.10: staged scaling request for 20x20->1920x1080 scaler_users = 0x400
<7> [416.340042] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:232:plane 3B] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.340305] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:232:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.340549] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:232:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.340788] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:232:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [416.341026] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:232:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [416.341305] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 594000 num active planes 1
<7> [416.341591] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [416.341834] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [416.342128] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:308:pipe B] attached scaler id 1.0 to PLANE:232
<7> [416.356072] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl
<7> [416.356147] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:232:plane 3B] because [FB:638] is removed
<7> [416.356180] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0
<7> [416.356483] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:232:plane 3B] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [416.356725] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:232:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [416.356968] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:232:plane 3B] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.357224] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:232:plane 3B] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.357465] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:232:plane 3B] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.357732] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 0 num active planes 0
<7> [416.357978] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [416.372965] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:638]
<7> [416.373111] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.10: staged scaling request for 20x20->1920x1080 scaler_users = 0x400
<7> [416.373413] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:232:plane 3B] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.373654] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:232:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.373893] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:232:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.374133] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:232:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [416.374384] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:232:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [416.374715] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.10: staged scaling request for 20x20->1920x1080 scaler_users = 0x400
<7> [416.374973] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:232:plane 3B] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.375224] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:232:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.375463] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:232:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.375703] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:232:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [416.375942] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:232:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [416.376271] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.10: staged scaling request for 20x20->1920x1080 scaler_users = 0x400
<7> [416.376526] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:232:plane 3B] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.376763] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:232:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.377003] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:232:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.377280] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:232:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [416.377519] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:232:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [416.377774] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 594000 num active planes 1
<7> [416.378021] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [416.378277] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [416.378573] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:308:pipe B] attached scaler id 1.0 to PLANE:232
<7> [416.389372] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl
<7> [416.389448] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:232:plane 3B] because [FB:638] is removed
<7> [416.389480] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0
<7> [416.389758] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:232:plane 3B] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [416.389997] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:232:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [416.390252] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:232:plane 3B] lines 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.390491] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:232:plane 3B] blocks 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.390731] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:232:plane 3B] min_ddb 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.390996] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 0 num active planes 0
<7> [416.391250] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [416.406217] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:638]
<7> [416.406376] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.11: staged scaling request for 20x20->1920x1080 scaler_users = 0x800
<7> [416.406623] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:262:plane 4B] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.406835] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:262:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.407044] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:262:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.407269] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:262:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [416.407480] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:262:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [416.407787] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.11: staged scaling request for 20x20->1920x1080 scaler_users = 0x800
<7> [416.408014] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:262:plane 4B] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.408234] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:262:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.408445] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:262:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.408656] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:262:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [416.408866] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:262:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [416.409160] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.11: staged scaling request for 20x20->1920x1080 scaler_users = 0x800
<7> [416.409395] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:262:plane 4B] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.409606] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:262:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.409816] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:262:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.410026] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:262:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [416.410245] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:262:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [416.410467] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 594000 num active planes 1
<7> [416.410685] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [416.410899] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [416.411155] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:308:pipe B] attached scaler id 1.0 to PLANE:262
<7> [416.422731] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl
<7> [416.422792] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:262:plane 4B] because [FB:638] is removed
<7> [416.422817] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.11: Staged freeing scaler id 0 scaler_users = 0x0
<7> [416.423037] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:262:plane 4B] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [416.423236] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:262:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [416.423426] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:262:plane 4B] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.423615] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:262:plane 4B] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.423803] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:262:plane 4B] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.424018] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 0 num active planes 0
<7> [416.424219] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [416.439542] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:638]
<7> [416.439647] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.11: staged scaling request for 20x20->1920x1080 scaler_users = 0x800
<7> [416.439849] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:262:plane 4B] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.440018] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:262:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.440189] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:262:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.440371] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:262:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [416.440541] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:262:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [416.440730] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 594000 num active planes 1
<7> [416.440905] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [416.441077] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [416.441290] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:308:pipe B] attached scaler id 1.0 to PLANE:262
<7> [416.456038] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl
<7> [416.456093] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:262:plane 4B] because [FB:638] is removed
<7> [416.456116] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.11: Staged freeing scaler id 0 scaler_users = 0x0
<7> [416.456326] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:262:plane 4B] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [416.456498] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:262:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [416.456668] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:262:plane 4B] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.456839] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:262:plane 4B] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.457008] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:262:plane 4B] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.457203] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 0 num active planes 0
<7> [416.457380] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [416.472837] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:638]
<7> [416.472942] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.11: staged scaling request for 20x20->1920x1080 scaler_users = 0x800
<7> [416.473144] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:262:plane 4B] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.473326] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:262:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.473495] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:262:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.473665] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:262:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [416.473834] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:262:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [416.474024] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 594000 num active planes 1
<7> [416.474206] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [416.474380] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [416.474587] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:308:pipe B] attached scaler id 1.0 to PLANE:262
<7> [416.489398] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl
<7> [416.489457] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:262:plane 4B] because [FB:638] is removed
<7> [416.489481] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.11: Staged freeing scaler id 0 scaler_users = 0x0
<7> [416.489696] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:262:plane 4B] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [416.489879] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:262:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [416.490062] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:262:plane 4B] lines 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.490261] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:262:plane 4B] blocks 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.490444] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:262:plane 4B] min_ddb 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.490650] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 0 num active planes 0
<7> [416.490841] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [416.506204] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:638]
<7> [416.506352] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.12: staged scaling request for 20x20->1920x1080 scaler_users = 0x1000
<7> [416.506588] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:272:plane 5B] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.506788] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:272:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.507005] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:272:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.507237] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:272:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [416.507454] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:272:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [416.507694] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 594000 num active planes 1
<7> [416.507918] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [416.508138] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [416.508418] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:308:pipe B] attached scaler id 1.0 to PLANE:272
<7> [416.522743] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl
<7> [416.522822] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:272:plane 5B] because [FB:638] is removed
<7> [416.522854] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.12: Staged freeing scaler id 0 scaler_users = 0x0
<7> [416.523132] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:272:plane 5B] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [416.523393] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:272:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [416.523639] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:272:plane 5B] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.523879] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:272:plane 5B] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.524121] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:272:plane 5B] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.524412] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 0 num active planes 0
<7> [416.524659] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [416.539611] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:638]
<7> [416.539756] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.12: staged scaling request for 20x20->1920x1080 scaler_users = 0x1000
<7> [416.540037] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:272:plane 5B] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.540295] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:272:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.540534] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:272:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.540778] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:272:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [416.541017] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:272:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [416.541297] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 594000 num active planes 1
<7> [416.541545] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [416.541790] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [416.542079] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:308:pipe B] attached scaler id 1.0 to PLANE:272
<7> [416.556069] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl
<7> [416.556148] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:272:plane 5B] because [FB:638] is removed
<7> [416.556181] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.12: Staged freeing scaler id 0 scaler_users = 0x0
<7> [416.556480] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:272:plane 5B] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [416.556719] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:272:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [416.556965] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:272:plane 5B] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.557216] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:272:plane 5B] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.557457] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:272:plane 5B] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.557723] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 0 num active planes 0
<7> [416.557967] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [416.572966] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:638]
<7> [416.573111] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.12: staged scaling request for 20x20->1920x1080 scaler_users = 0x1000
<7> [416.573410] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:272:plane 5B] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.573652] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:272:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.573894] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:272:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.574133] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:272:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [416.574384] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:272:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [416.574650] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 594000 num active planes 1
<7> [416.574899] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [416.575144] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [416.575447] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:308:pipe B] attached scaler id 1.0 to PLANE:272
<7> [416.589419] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl
<7> [416.589498] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:272:plane 5B] because [FB:638] is removed
<7> [416.589532] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.12: Staged freeing scaler id 0 scaler_users = 0x0
<7> [416.589807] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:272:plane 5B] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [416.590050] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:272:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [416.590308] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:272:plane 5B] lines 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.590548] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:272:plane 5B] blocks 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.590787] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:272:plane 5B] min_ddb 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.591053] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 0 num active planes 0
<7> [416.591305] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [416.606247] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:638]
<7> [416.606425] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.13: staged scaling request for 20x20->1920x1080 scaler_users = 0x2000
<7> [416.606708] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:282:plane 6B] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.606948] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.607186] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.607444] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [416.607685] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [416.607954] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 594000 num active planes 1
<7> [416.608213] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [416.608457] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [416.608749] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:308:pipe B] attached scaler id 1.0 to PLANE:282
<7> [416.622740] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl
<7> [416.622815] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:282:plane 6B] because [FB:638] is removed
<7> [416.622847] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.13: Staged freeing scaler id 0 scaler_users = 0x0
<7> [416.623127] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:282:plane 6B] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [416.623389] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [416.623629] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.623870] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.624112] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.624401] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 0 num active planes 0
<7> [416.624650] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [416.639611] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:638]
<7> [416.639756] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.13: staged scaling request for 20x20->1920x1080 scaler_users = 0x2000
<7> [416.640035] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:282:plane 6B] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.640295] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.640533] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.640776] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [416.641017] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [416.641358] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.13: staged scaling request for 20x20->1920x1080 scaler_users = 0x2000
<7> [416.641615] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:282:plane 6B] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.641854] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.642093] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.642346] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [416.642586] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [416.642901] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.13: staged scaling request for 20x20->1920x1080 scaler_users = 0x2000
<7> [416.643157] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:282:plane 6B] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.643411] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.643651] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.643890] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [416.644129] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [416.644391] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 594000 num active planes 1
<7> [416.644637] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [416.644880] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [416.645172] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:308:pipe B] attached scaler id 1.0 to PLANE:282
<7> [416.656023] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl
<7> [416.656099] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:282:plane 6B] because [FB:638] is removed
<7> [416.656131] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.13: Staged freeing scaler id 0 scaler_users = 0x0
<7> [416.656428] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:282:plane 6B] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [416.656670] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [416.656909] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.657149] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.657401] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.657668] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 0 num active planes 0
<7> [416.657913] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [416.672921] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:638]
<7> [416.673047] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.13: staged scaling request for 20x20->1920x1080 scaler_users = 0x2000
<7> [416.673308] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:282:plane 6B] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.673521] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.673731] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.673943] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [416.674153] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [416.674454] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.13: staged scaling request for 20x20->1920x1080 scaler_users = 0x2000
<7> [416.674680] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:282:plane 6B] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.674889] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.675098] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.675321] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [416.675531] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [416.675809] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.13: staged scaling request for 20x20->1920x1080 scaler_users = 0x2000
<7> [416.676037] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:282:plane 6B] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.676254] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.676465] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.676675] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [416.676886] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [416.677111] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 594000 num active planes 1
<7> [416.677357] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [416.677573] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [416.677831] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:308:pipe B] attached scaler id 1.0 to PLANE:282
<7> [416.689394] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl
<7> [416.689455] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:282:plane 6B] because [FB:638] is removed
<7> [416.689480] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.13: Staged freeing scaler id 0 scaler_users = 0x0
<7> [416.689701] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:282:plane 6B] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [416.689889] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [416.690078] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] lines 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.690281] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] blocks 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.690470] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:282:plane 6B] min_ddb 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.690679] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 0 num active planes 0
<7> [416.690873] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [416.706250] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:638]
<7> [416.706377] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.14: staged scaling request for 20x20->1920x1080 scaler_users = 0x4000
<7> [416.706572] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:292:plane 7B] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.706742] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:292:plane 7B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.706911] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:292:plane 7B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.707081] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:292:plane 7B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [416.707262] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:292:plane 7B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [416.707454] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 594000 num active planes 1
<7> [416.707629] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [416.707800] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [416.708006] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:308:pipe B] attached scaler id 1.0 to PLANE:292
<7> [416.722694] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl
<7> [416.722750] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:292:plane 7B] because [FB:638] is removed
<7> [416.722773] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.14: Staged freeing scaler id 0 scaler_users = 0x0
<7> [416.722972] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:292:plane 7B] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [416.723144] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:292:plane 7B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [416.723328] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:292:plane 7B] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.723499] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:292:plane 7B] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.723668] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:292:plane 7B] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.723859] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 0 num active planes 0
<7> [416.724035] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [416.739535] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:638]
<7> [416.739642] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.14: staged scaling request for 20x20->1920x1080 scaler_users = 0x4000
<7> [416.739843] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:292:plane 7B] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.740014] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:292:plane 7B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.740197] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:292:plane 7B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.740368] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:292:plane 7B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [416.740539] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:292:plane 7B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [416.740729] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 594000 num active planes 1
<7> [416.740905] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [416.741077] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [416.741291] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:308:pipe B] attached scaler id 1.0 to PLANE:292
<7> [416.756042] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl
<7> [416.756098] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:292:plane 7B] because [FB:638] is removed
<7> [416.756121] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.14: Staged freeing scaler id 0 scaler_users = 0x0
<7> [416.756334] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:292:plane 7B] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [416.756506] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:292:plane 7B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [416.756676] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:292:plane 7B] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.756850] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:292:plane 7B] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.757042] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:292:plane 7B] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.757264] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 0 num active planes 0
<7> [416.757453] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [416.772912] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:638]
<7> [416.773035] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.14: staged scaling request for 20x20->1920x1080 scaler_users = 0x4000
<7> [416.773285] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:292:plane 7B] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.773485] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:292:plane 7B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.773685] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:292:plane 7B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.773887] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:292:plane 7B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [416.774087] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:292:plane 7B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [416.774319] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 594000 num active planes 1
<7> [416.774525] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [416.774728] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [416.774969] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:308:pipe B] attached scaler id 1.0 to PLANE:292
<7> [416.789408] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl
<7> [416.789479] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:292:plane 7B] because [FB:638] is removed
<7> [416.789508] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:308:pipe B] scaler_user index 1.14: Staged freeing scaler id 0 scaler_users = 0x0
<7> [416.789761] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:292:plane 7B] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [416.789977] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:292:plane 7B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [416.790215] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:292:plane 7B] lines 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.790435] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:292:plane 7B] blocks 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.790653] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:292:plane 7B] min_ddb 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.790895] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:308:pipe B] data rate 0 num active planes 0
<7> [416.791119] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<6> [416.806933] [IGT] kms_plane_scaling: finished subtest pipe-B, SUCCESS
<6> [416.808056] [IGT] kms_plane_scaling: starting dynamic subtest pipe-C
<7> [416.810411] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK for addr: 003a w(1)
<7> [416.810664] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK on first message, retry
<7> [416.811039] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK for addr: 003a w(1)
<7> [416.811297] i915 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6)
<7> [416.811881] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK for addr: 003a w(1)
<7> [416.812149] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK on first message, retry
<7> [416.812628] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK for addr: 003a w(1)
<7> [416.812896] i915 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6)
<7> [416.813529] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK for addr: 003a w(1)
<7> [416.813784] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK on first message, retry
<7> [416.814200] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK for addr: 003a w(1)
<7> [416.814472] i915 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6)
<7> [416.816249] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:638]
<7> [416.819811] i915 0000:03:00.0: [drm:intel_atomic_check [i915]] [CONNECTOR:599:HDMI-A-1] Limiting display bpp to 24 (EDID bpp 0, max requested bpp 36, max platform bpp 36)
<7> [416.820099] i915 0000:03:00.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24)
<7> [416.820395] i915 0000:03:00.0: [drm:intel_atomic_check [i915]] [CRTC:446:pipe C] hw max bpp: 24, pipe bpp: 24, dithering: 0
<7> [416.820675] i915 0000:03:00.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:586:DDI A/PHY A] [CRTC:446:pipe C]
<7> [416.820938] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.enable (expected yes, found no)
<7> [416.821229] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.active (expected yes, found no)
<7> [416.821508] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in cpu_transcoder (expected 1, found -1)
<7> [416.821786] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in lane_count (expected 4, found 0)
<7> [416.822062] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000)
<7> [416.822349] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [416.822628] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)
<7> [416.822902] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2200, found 0)
<7> [416.823189] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)
<7> [416.823464] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2200, found 0)
<7> [416.823738] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0)
<7> [416.824012] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2052, found 0)
<7> [416.824297] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)
<7> [416.824575] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)
<7> [416.824850] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0)
<7> [416.825126] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0)
<7> [416.825473] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0)
<7> [416.825747] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0)
<7> [416.826022] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)
<7> [416.826306] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2200, found 0)
<7> [416.826583] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)
<7> [416.826859] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2200, found 0)
<7> [416.827135] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0)
<7> [416.827415] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2052, found 0)
<7> [416.827691] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)
<7> [416.827969] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)
<7> [416.828250] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0)
<7> [416.828524] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0)
<7> [416.828799] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0)
<7> [416.829074] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0)
<7> [416.829365] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [416.829640] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)
<7> [416.829918] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)
<7> [416.830208] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in pipe_bpp (expected 24, found 0)
<7> [416.830482] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 148500, found 0)
<7> [416.830757] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 148500, found 0)
<7> [416.831032] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:308:pipe B] fastset requirement not met in port_clock (expected 148500, found 0)
<7> [416.831314] i915 0000:03:00.0: [drm:intel_atomic_check [i915]] [CRTC:308:pipe B] fastset requirement not met, forcing full modeset
<7> [416.831591] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.enable (expected no, found yes)
<7> [416.831869] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.active (expected no, found yes)
<7> [416.832144] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in cpu_transcoder (expected -1, found 2)
<7> [416.832429] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in lane_count (expected 0, found 4)
<7> [416.832708] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040)
<7> [416.832985] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [416.833268] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)
<7> [416.833546] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2200)
<7> [416.833821] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)
<7> [416.834096] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2200)
<7> [416.834381] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008)
<7> [416.834657] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2052)
<7> [416.834935] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)
<7> [416.835218] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)
<7> [416.835493] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084)
<7> [416.835767] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089)
<7> [416.836044] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125)
<7> [416.836329] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125)
<7> [416.836603] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)
<7> [416.836880] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2200)
<7> [416.837136] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)
<7> [416.837380] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2200)
<7> [416.837619] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008)
<7> [416.837857] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2052)
<7> [416.838094] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)
<7> [416.838338] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)
<7> [416.838580] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084)
<7> [416.838819] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089)
<7> [416.839058] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125)
<7> [416.839306] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125)
<7> [416.839544] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [416.839784] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)
<7> [416.840023] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)
<7> [416.840271] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in pipe_bpp (expected 0, found 24)
<7> [416.840515] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 148500)
<7> [416.840752] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 148500)
<7> [416.840991] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in port_clock (expected 0, found 148500)
<7> [416.841235] i915 0000:03:00.0: [drm:intel_atomic_check [i915]] [CRTC:446:pipe C] fastset requirement not met, forcing full modeset
<7> [416.841474] i915 0000:03:00.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:308:pipe B] releasing DPLL 0
<7> [416.841734] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.16: staged scaling request for 20x20->1920x1080 scaler_users = 0x10000
<7> [416.842005] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [CRTC:308:pipe B] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x2 -> 0x4
<7> [416.842220] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [CRTC:446:pipe C] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x2 -> 0x4
<7> [416.842433] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:302:cursor B] ddb (2012 - 2048) -> ( 0 - 0), size 36 -> 0
<7> [416.842639] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:310:plane 1C] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.842842] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:440:cursor C] ddb ( 0 - 0) -> (2012 - 2048), size 0 -> 36
<7> [416.843045] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:310:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.843255] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:310:plane 1C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.843459] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:310:plane 1C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [416.843665] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:310:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [416.843897] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 594000 num active planes 1
<7> [416.844105] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [416.844323] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [416.844555] i915 0000:03:00.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:308:pipe B] min cdclk: 74250 kHz -> 0 kHz
<7> [416.844763] i915 0000:03:00.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:446:pipe C] min cdclk: 0 kHz -> 74250 kHz
<7> [416.845000] i915 0000:03:00.0: [drm:intel_find_dpll [i915]] [CRTC:446:pipe C] allocated DPLL 0
<7> [416.845219] i915 0000:03:00.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:446:pipe C] reserving DPLL 0
<7> [416.845433] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:446:pipe C] attached scaler id 2.0 to PLANE:310
<7> [416.845639] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [CRTC:308:pipe B] enable: no [modeset]
<7> [416.845851] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:172:plane 1B] fb: [NOFB], visible: no
<7> [416.846062] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:202:plane 2B] fb: [NOFB], visible: no
<7> [416.846279] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:232:plane 3B] fb: [NOFB], visible: no
<7> [416.846489] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:262:plane 4B] fb: [NOFB], visible: no
<7> [416.846698] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:272:plane 5B] fb: [NOFB], visible: no
<7> [416.846919] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:282:plane 6B] fb: [NOFB], visible: no
<7> [416.847106] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:292:plane 7B] fb: [NOFB], visible: no
<7> [416.847300] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:302:cursor B] fb: [NOFB], visible: no
<7> [416.847488] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [CRTC:446:pipe C] enable: yes [modeset]
<7> [416.847676] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB
<7> [416.847864] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: C, pipe bpp: 24, dithering: 0
<7> [416.848051] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>
<7> [416.848247] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [416.848435] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0
<7> [416.848621] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0
<7> [416.848807] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7> [416.848996] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2
<7> [416.849191] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [416.849380] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 42, guardband: 44 vsync start: 0, vsync end: 0
<7> [416.849567] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1125, vmax vtotal: 1125
<7> [416.849754] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [416.849941] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [416.850130] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [416.850328] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5
<7> [416.850518] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [416.850707] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5
<7> [416.850896] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] port clock: 148500, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 74250
<7> [416.851084] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] linetime: 119, ips linetime: 0
<7> [416.851281] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x10000, scaler_id: -1, scaling_filter: 0
<7> [416.851468] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [416.851657] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0
<7> [416.851843] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1001d0, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0
<7> [416.852037] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [416.852218] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [416.852389] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [416.852558] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [416.852727] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [416.852895] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [416.853064] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [416.853239] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [416.853408] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [416.853576] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [416.853744] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [416.853913] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [416.854081] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [416.854256] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:310:plane 1C] fb: [FB:638] 20x20 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [416.854428] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: 0, scaling_filter: 0
<7> [416.854599] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] src: 20.000000x20.000000+0.000000+0.000000 dst: 1920x1080+0+0
<7> [416.854770] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:340:plane 2C] fb: [NOFB], visible: no
<7> [416.854941] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:370:plane 3C] fb: [NOFB], visible: no
<7> [416.855110] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:400:plane 4C] fb: [NOFB], visible: no
<7> [416.855285] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:410:plane 5C] fb: [NOFB], visible: no
<7> [416.855454] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:420:plane 6C] fb: [NOFB], visible: no
<7> [416.855624] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:430:plane 7C] fb: [NOFB], visible: no
<7> [416.855794] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:440:cursor C] fb: [NOFB], visible: no
<7> [416.856542] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling PW_4
<7> [416.856812] i915 0000:03:00.0: [drm:intel_disable_transcoder [i915]] disabling pipe B
<7> [416.873254] i915 0000:03:00.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A
<7> [416.873459] i915 0000:03:00.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x2, on? 1) for [CRTC:308:pipe B]
<7> [416.873656] i915 0000:03:00.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0
<7> [416.873836] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:586:DDI A/PHY A]
<7> [416.873997] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:588:DP-MST A]
<7> [416.874158] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:589:DP-MST B]
<7> [416.874324] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:590:DP-MST C]
<7> [416.874484] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:591:DP-MST D]
<7> [416.874644] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:605:DDI B/PHY B]
<7> [416.874805] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:609:DDI TC1/PHY C]
<7> [416.874967] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:611:DP-MST A]
<7> [416.875128] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:612:DP-MST B]
<7> [416.875325] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:613:DP-MST C]
<7> [416.875486] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:614:DP-MST D]
<7> [416.875647] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:621:DDI TC2/PHY D]
<7> [416.875807] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:623:DP-MST A]
<7> [416.875967] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:624:DP-MST B]
<7> [416.876129] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:625:DP-MST C]
<7> [416.876329] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:626:DP-MST D]
<7> [416.876491] i915 0000:03:00.0: [drm:verify_connector_state [i915]] [CONNECTOR:587:DP-1]
<7> [416.876691] i915 0000:03:00.0: [drm:verify_connector_state [i915]] [CONNECTOR:606:HDMI-A-2]
<7> [416.876887] i915 0000:03:00.0: [drm:verify_connector_state [i915]] [CONNECTOR:610:DP-2]
<7> [416.877082] i915 0000:03:00.0: [drm:verify_connector_state [i915]] [CONNECTOR:618:HDMI-A-3]
<7> [416.877317] i915 0000:03:00.0: [drm:verify_connector_state [i915]] [CONNECTOR:622:DP-3]
<7> [416.877515] i915 0000:03:00.0: [drm:verify_connector_state [i915]] [CONNECTOR:630:HDMI-A-4]
<7> [416.877797] i915 0000:03:00.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x4, on? 0) for [CRTC:446:pipe C]
<7> [416.877964] i915 0000:03:00.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0
<7> [416.878205] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A
<7> [416.878462] i915 0000:03:00.0: [drm:intel_enable_transcoder [i915]] enabling pipe C
<7> [416.896370] i915 0000:03:00.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:308:pipe B]
<7> [416.897022] i915 0000:03:00.0: [drm:verify_connector_state [i915]] [CONNECTOR:599:HDMI-A-1]
<7> [416.897357] i915 0000:03:00.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:446:pipe C]
<7> [416.899077] i915 0000:03:00.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe C
<7> [416.899314] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl
<7> [416.899368] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:310:plane 1C] because [FB:638] is removed
<7> [416.899391] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.16: Staged freeing scaler id 0 scaler_users = 0x0
<7> [416.899568] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:310:plane 1C] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [416.899726] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:310:plane 1C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [416.899884] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:310:plane 1C] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.900043] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:310:plane 1C] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.900232] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:310:plane 1C] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.900421] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 0 num active planes 0
<7> [416.900584] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [416.913402] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:639]
<7> [416.913505] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.16: staged scaling request for 20x20->1920x1080 scaler_users = 0x10000
<7> [416.913690] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:310:plane 1C] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.913849] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:310:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.914008] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:310:plane 1C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.914169] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:310:plane 1C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [416.914338] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:310:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [416.914514] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 594000 num active planes 1
<7> [416.914676] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [416.914840] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [416.915034] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:446:pipe C] attached scaler id 2.0 to PLANE:310
<7> [416.929890] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl
<7> [416.929943] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:310:plane 1C] because [FB:639] is removed
<7> [416.929965] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.16: Staged freeing scaler id 0 scaler_users = 0x0
<7> [416.930155] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:310:plane 1C] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [416.930326] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:310:plane 1C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [416.930484] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:310:plane 1C] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.930641] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:310:plane 1C] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.930798] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:310:plane 1C] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.930975] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 0 num active planes 0
<7> [416.931136] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [416.946656] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:639]
<7> [416.946756] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.16: staged scaling request for 20x20->1920x1080 scaler_users = 0x10000
<7> [416.946946] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:310:plane 1C] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.947104] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:310:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.947273] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:310:plane 1C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.947478] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:310:plane 1C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [416.947640] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:310:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [416.947818] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 594000 num active planes 1
<7> [416.947981] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [416.948142] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [416.948379] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:446:pipe C] attached scaler id 2.0 to PLANE:310
<7> [416.963233] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl
<7> [416.963287] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:310:plane 1C] because [FB:639] is removed
<7> [416.963308] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.16: Staged freeing scaler id 0 scaler_users = 0x0
<7> [416.963494] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:310:plane 1C] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [416.963652] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:310:plane 1C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [416.963809] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:310:plane 1C] lines 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.963966] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:310:plane 1C] blocks 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.964124] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:310:plane 1C] min_ddb 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.964310] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 0 num active planes 0
<7> [416.964473] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [416.980037] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:639]
<7> [416.980182] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.17: staged scaling request for 20x20->1920x1080 scaler_users = 0x20000
<7> [416.980406] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:340:plane 2C] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.980567] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:340:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.980724] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:340:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.980882] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:340:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [416.981041] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:340:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [416.981312] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.17: staged scaling request for 20x20->1920x1080 scaler_users = 0x20000
<7> [416.981482] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:340:plane 2C] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [416.981638] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:340:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [416.981797] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:340:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [416.981956] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:340:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [416.982114] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:340:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [416.982322] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 594000 num active planes 1
<7> [416.982484] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [416.982644] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [416.982837] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:446:pipe C] attached scaler id 2.0 to PLANE:340
<7> [416.996516] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl
<7> [416.996566] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:340:plane 2C] because [FB:639] is removed
<7> [416.996588] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.17: Staged freeing scaler id 0 scaler_users = 0x0
<7> [416.996775] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:340:plane 2C] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [416.996933] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:340:plane 2C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [416.997092] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:340:plane 2C] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.997304] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:340:plane 2C] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.997463] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:340:plane 2C] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [416.997638] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 0 num active planes 0
<7> [416.997801] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [417.013388] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:639]
<7> [417.013492] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.17: staged scaling request for 20x20->1920x1080 scaler_users = 0x20000
<7> [417.013688] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:340:plane 2C] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.013857] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:340:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.014026] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:340:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.014207] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:340:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [417.014377] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:340:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [417.014613] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.17: staged scaling request for 20x20->1920x1080 scaler_users = 0x20000
<7> [417.014794] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:340:plane 2C] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.014962] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:340:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.015129] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:340:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.015306] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:340:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [417.015475] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:340:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [417.015698] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.17: staged scaling request for 20x20->1920x1080 scaler_users = 0x20000
<7> [417.015881] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:340:plane 2C] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.016049] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:340:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.016226] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:340:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.016397] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:340:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [417.016566] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:340:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [417.016745] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 594000 num active planes 1
<7> [417.016918] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [417.017089] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [417.017302] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:446:pipe C] attached scaler id 2.0 to PLANE:340
<7> [417.029900] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl
<7> [417.029954] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:340:plane 2C] because [FB:639] is removed
<7> [417.029977] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.17: Staged freeing scaler id 0 scaler_users = 0x0
<7> [417.030188] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:340:plane 2C] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [417.030360] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:340:plane 2C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [417.030530] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:340:plane 2C] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.030701] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:340:plane 2C] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.030874] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:340:plane 2C] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.031063] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 0 num active planes 0
<7> [417.031252] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [417.046662] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:639]
<7> [417.046767] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.17: staged scaling request for 20x20->1920x1080 scaler_users = 0x20000
<7> [417.046968] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:340:plane 2C] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.047138] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:340:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.047317] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:340:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.047488] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:340:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [417.047657] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:340:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [417.047846] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 594000 num active planes 1
<7> [417.048020] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [417.048202] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [417.048408] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:446:pipe C] attached scaler id 2.0 to PLANE:340
<7> [417.063231] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl
<7> [417.063286] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:340:plane 2C] because [FB:639] is removed
<7> [417.063309] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.17: Staged freeing scaler id 0 scaler_users = 0x0
<7> [417.063507] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:340:plane 2C] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [417.063676] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:340:plane 2C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [417.063846] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:340:plane 2C] lines 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.064015] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:340:plane 2C] blocks 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.064191] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:340:plane 2C] min_ddb 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.064379] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 0 num active planes 0
<7> [417.064553] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [417.080097] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:639]
<7> [417.080245] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.18: staged scaling request for 20x20->1920x1080 scaler_users = 0x40000
<7> [417.080456] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:370:plane 3C] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.080642] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 3C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.080824] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 3C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.081007] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 3C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [417.081216] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 3C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [417.081421] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 594000 num active planes 1
<7> [417.081609] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [417.081794] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [417.082037] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:446:pipe C] attached scaler id 2.0 to PLANE:370
<7> [417.096505] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl
<7> [417.096570] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:370:plane 3C] because [FB:639] is removed
<7> [417.096596] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.18: Staged freeing scaler id 0 scaler_users = 0x0
<7> [417.096831] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:370:plane 3C] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [417.097055] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 3C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [417.097284] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 3C] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.097501] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 3C] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.097720] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 3C] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.097963] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 0 num active planes 0
<7> [417.098191] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [417.113480] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:639]
<7> [417.113624] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.18: staged scaling request for 20x20->1920x1080 scaler_users = 0x40000
<7> [417.113906] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:370:plane 3C] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.114146] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 3C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.114402] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 3C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.114641] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 3C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [417.114878] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 3C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [417.115148] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 594000 num active planes 1
<7> [417.115411] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [417.115654] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [417.115947] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:446:pipe C] attached scaler id 2.0 to PLANE:370
<7> [417.129909] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl
<7> [417.129986] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:370:plane 3C] because [FB:639] is removed
<7> [417.130018] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.18: Staged freeing scaler id 0 scaler_users = 0x0
<7> [417.130310] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:370:plane 3C] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [417.130552] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 3C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [417.130790] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 3C] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.131030] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 3C] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.131283] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 3C] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.131550] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 0 num active planes 0
<7> [417.131796] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [417.146749] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:639]
<7> [417.146895] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.18: staged scaling request for 20x20->1920x1080 scaler_users = 0x40000
<7> [417.147195] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:370:plane 3C] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.147437] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 3C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.147678] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 3C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.147919] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 3C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [417.148160] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 3C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [417.148439] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 594000 num active planes 1
<7> [417.148687] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [417.148929] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [417.149232] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:446:pipe C] attached scaler id 2.0 to PLANE:370
<7> [417.163268] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl
<7> [417.163345] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:370:plane 3C] because [FB:639] is removed
<7> [417.163377] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.18: Staged freeing scaler id 0 scaler_users = 0x0
<7> [417.163652] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:370:plane 3C] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [417.163896] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 3C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [417.164134] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 3C] lines 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.164398] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 3C] blocks 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.164639] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:370:plane 3C] min_ddb 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.164908] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 0 num active planes 0
<7> [417.165154] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [417.180190] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:639]
<7> [417.180366] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.19: staged scaling request for 20x20->1920x1080 scaler_users = 0x80000
<7> [417.180639] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:400:plane 4C] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.180881] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:400:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.181118] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:400:plane 4C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.181377] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:400:plane 4C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [417.181621] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:400:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [417.181888] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 594000 num active planes 1
<7> [417.182137] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [417.182390] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [417.182686] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:446:pipe C] attached scaler id 2.0 to PLANE:400
<7> [417.196522] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl
<7> [417.196601] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:400:plane 4C] because [FB:639] is removed
<7> [417.196632] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.19: Staged freeing scaler id 0 scaler_users = 0x0
<7> [417.196909] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:400:plane 4C] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [417.197155] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:400:plane 4C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [417.197414] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:400:plane 4C] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.197657] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:400:plane 4C] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.197897] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:400:plane 4C] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.198173] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 0 num active planes 0
<7> [417.198420] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [417.213473] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:639]
<7> [417.213616] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.19: staged scaling request for 20x20->1920x1080 scaler_users = 0x80000
<7> [417.213899] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:400:plane 4C] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.214142] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:400:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.214397] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:400:plane 4C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.214638] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:400:plane 4C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [417.214879] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:400:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [417.215149] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 594000 num active planes 1
<7> [417.215410] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [417.215655] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [417.215948] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:446:pipe C] attached scaler id 2.0 to PLANE:400
<7> [417.229919] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl
<7> [417.230000] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:400:plane 4C] because [FB:639] is removed
<7> [417.230031] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.19: Staged freeing scaler id 0 scaler_users = 0x0
<7> [417.230334] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:400:plane 4C] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [417.230574] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:400:plane 4C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [417.230816] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:400:plane 4C] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.231056] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:400:plane 4C] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.231308] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:400:plane 4C] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.231572] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 0 num active planes 0
<7> [417.231817] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [417.246777] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:639]
<7> [417.246944] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.19: staged scaling request for 20x20->1920x1080 scaler_users = 0x80000
<7> [417.247245] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:400:plane 4C] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.247486] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:400:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.247725] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:400:plane 4C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.247964] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:400:plane 4C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [417.248214] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:400:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [417.248542] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.19: staged scaling request for 20x20->1920x1080 scaler_users = 0x80000
<7> [417.248798] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:400:plane 4C] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.249037] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:400:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.249289] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:400:plane 4C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.249535] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:400:plane 4C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [417.249775] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:400:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [417.250029] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 594000 num active planes 1
<7> [417.250286] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [417.250530] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [417.250822] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:446:pipe C] attached scaler id 2.0 to PLANE:400
<7> [417.263268] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl
<7> [417.263344] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:400:plane 4C] because [FB:639] is removed
<7> [417.263375] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.19: Staged freeing scaler id 0 scaler_users = 0x0
<7> [417.263654] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:400:plane 4C] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [417.263896] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:400:plane 4C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [417.264136] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:400:plane 4C] lines 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.264410] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:400:plane 4C] blocks 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.264650] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:400:plane 4C] min_ddb 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.264917] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 0 num active planes 0
<7> [417.265176] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [417.280183] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:639]
<7> [417.280359] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.20: staged scaling request for 20x20->1920x1080 scaler_users = 0x100000
<7> [417.280638] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:410:plane 5C] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.280881] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:410:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.281119] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:410:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.281371] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:410:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [417.281610] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:410:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [417.281956] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.20: staged scaling request for 20x20->1920x1080 scaler_users = 0x100000
<7> [417.282225] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:410:plane 5C] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.282463] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:410:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.282699] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:410:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.282943] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:410:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [417.283194] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:410:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [417.283529] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.20: staged scaling request for 20x20->1920x1080 scaler_users = 0x100000
<7> [417.283790] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:410:plane 5C] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.284031] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:410:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.284280] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:410:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.284519] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:410:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [417.284756] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:410:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [417.285006] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 594000 num active planes 1
<7> [417.285306] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [417.285548] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [417.285840] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:446:pipe C] attached scaler id 2.0 to PLANE:410
<7> [417.296541] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl
<7> [417.296617] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:410:plane 5C] because [FB:639] is removed
<7> [417.296649] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.20: Staged freeing scaler id 0 scaler_users = 0x0
<7> [417.296923] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:410:plane 5C] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [417.297181] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:410:plane 5C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [417.297422] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:410:plane 5C] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.297662] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:410:plane 5C] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.297902] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:410:plane 5C] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.298177] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 0 num active planes 0
<7> [417.298423] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [417.313409] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:639]
<7> [417.313524] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.20: staged scaling request for 20x20->1920x1080 scaler_users = 0x100000
<7> [417.313747] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:410:plane 5C] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.313938] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:410:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.314125] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:410:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.314328] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:410:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [417.314517] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:410:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [417.314729] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 594000 num active planes 1
<7> [417.314921] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [417.315112] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [417.315349] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:446:pipe C] attached scaler id 2.0 to PLANE:410
<7> [417.329896] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl
<7> [417.329956] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:410:plane 5C] because [FB:639] is removed
<7> [417.329981] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.20: Staged freeing scaler id 0 scaler_users = 0x0
<7> [417.330212] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:410:plane 5C] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [417.330403] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:410:plane 5C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [417.330592] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:410:plane 5C] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.330780] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:410:plane 5C] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.330970] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:410:plane 5C] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.331189] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 0 num active planes 0
<7> [417.331383] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [417.346670] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:639]
<7> [417.346784] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.20: staged scaling request for 20x20->1920x1080 scaler_users = 0x100000
<7> [417.347008] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:410:plane 5C] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.347212] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:410:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.347402] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:410:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.347592] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:410:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [417.347779] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:410:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [417.347988] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 594000 num active planes 1
<7> [417.348188] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [417.348379] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [417.348609] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:446:pipe C] attached scaler id 2.0 to PLANE:410
<7> [417.363243] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl
<7> [417.363303] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:410:plane 5C] because [FB:639] is removed
<7> [417.363328] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.20: Staged freeing scaler id 0 scaler_users = 0x0
<7> [417.363549] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:410:plane 5C] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [417.363738] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:410:plane 5C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [417.363927] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:410:plane 5C] lines 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.364113] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:410:plane 5C] blocks 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.364326] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:410:plane 5C] min_ddb 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.364536] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 0 num active planes 0
<7> [417.364730] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [417.379947] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:639]
<7> [417.380088] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.21: staged scaling request for 20x20->1920x1080 scaler_users = 0x200000
<7> [417.380320] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:420:plane 6C] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.380511] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:420:plane 6C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.380699] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:420:plane 6C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.380887] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:420:plane 6C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [417.381075] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:420:plane 6C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [417.381292] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 594000 num active planes 1
<7> [417.381484] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [417.381675] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [417.381903] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:446:pipe C] attached scaler id 2.0 to PLANE:420
<7> [417.396487] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl
<7> [417.396548] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:420:plane 6C] because [FB:639] is removed
<7> [417.396574] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.21: Staged freeing scaler id 0 scaler_users = 0x0
<7> [417.396798] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:420:plane 6C] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [417.397010] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:420:plane 6C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [417.397237] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:420:plane 6C] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.397442] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:420:plane 6C] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.397649] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:420:plane 6C] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.397879] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 0 num active planes 0
<7> [417.398088] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [417.413471] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:639]
<7> [417.413608] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.21: staged scaling request for 20x20->1920x1080 scaler_users = 0x200000
<7> [417.413873] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:420:plane 6C] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.414100] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:420:plane 6C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.414341] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:420:plane 6C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.414565] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:420:plane 6C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [417.414787] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:420:plane 6C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [417.415036] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 594000 num active planes 1
<7> [417.415284] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [417.415514] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [417.415789] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:446:pipe C] attached scaler id 2.0 to PLANE:420
<7> [417.429909] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl
<7> [417.429982] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:420:plane 6C] because [FB:639] is removed
<7> [417.430012] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.21: Staged freeing scaler id 0 scaler_users = 0x0
<7> [417.430293] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:420:plane 6C] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [417.430518] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:420:plane 6C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [417.430741] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:420:plane 6C] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.430967] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:420:plane 6C] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.431199] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:420:plane 6C] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.431450] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 0 num active planes 0
<7> [417.431682] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [417.446687] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:639]
<7> [417.446824] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.21: staged scaling request for 20x20->1920x1080 scaler_users = 0x200000
<7> [417.447119] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:420:plane 6C] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.447386] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:420:plane 6C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.447635] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:420:plane 6C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.447884] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:420:plane 6C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [417.448132] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:420:plane 6C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [417.448424] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 594000 num active planes 1
<7> [417.448679] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [417.448929] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [417.449244] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:446:pipe C] attached scaler id 2.0 to PLANE:420
<7> [417.463263] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl
<7> [417.463343] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:420:plane 6C] because [FB:639] is removed
<7> [417.463376] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.21: Staged freeing scaler id 0 scaler_users = 0x0
<7> [417.463660] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:420:plane 6C] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [417.463908] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:420:plane 6C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [417.464166] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:420:plane 6C] lines 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.464415] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:420:plane 6C] blocks 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.464662] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:420:plane 6C] min_ddb 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.464938] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 0 num active planes 0
<7> [417.465205] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [417.480098] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:639]
<7> [417.480298] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.22: staged scaling request for 20x20->1920x1080 scaler_users = 0x400000
<7> [417.480590] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:430:plane 7C] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.480843] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:430:plane 7C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.481091] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:430:plane 7C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.481355] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:430:plane 7C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [417.481604] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:430:plane 7C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [417.481884] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 594000 num active planes 1
<7> [417.482140] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [417.482406] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [417.482715] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:446:pipe C] attached scaler id 2.0 to PLANE:430
<7> [417.496563] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl
<7> [417.496645] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:430:plane 7C] because [FB:639] is removed
<7> [417.496679] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.22: Staged freeing scaler id 0 scaler_users = 0x0
<7> [417.496969] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:430:plane 7C] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [417.497241] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:430:plane 7C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [417.497490] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:430:plane 7C] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.497739] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:430:plane 7C] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.497987] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:430:plane 7C] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.498271] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 0 num active planes 0
<7> [417.498527] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [417.513482] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:639]
<7> [417.513657] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.22: staged scaling request for 20x20->1920x1080 scaler_users = 0x400000
<7> [417.513948] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:430:plane 7C] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.514214] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:430:plane 7C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.514464] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:430:plane 7C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.514712] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:430:plane 7C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [417.514958] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:430:plane 7C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [417.515320] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.22: staged scaling request for 20x20->1920x1080 scaler_users = 0x400000
<7> [417.515585] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:430:plane 7C] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.515834] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:430:plane 7C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.516085] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:430:plane 7C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.516344] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:430:plane 7C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [417.516591] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:430:plane 7C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [417.516851] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 594000 num active planes 1
<7> [417.517105] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [417.517376] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [417.517680] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:446:pipe C] attached scaler id 2.0 to PLANE:430
<7> [417.529926] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl
<7> [417.530004] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:430:plane 7C] because [FB:639] is removed
<7> [417.530038] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.22: Staged freeing scaler id 0 scaler_users = 0x0
<7> [417.530346] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:430:plane 7C] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [417.530596] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:430:plane 7C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [417.530844] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:430:plane 7C] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.531095] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:430:plane 7C] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.531357] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:430:plane 7C] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.531632] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 0 num active planes 0
<7> [417.531887] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [417.546813] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:639]
<7> [417.546965] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.22: staged scaling request for 20x20->1920x1080 scaler_users = 0x400000
<7> [417.547272] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:430:plane 7C] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.547523] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:430:plane 7C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.547770] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:430:plane 7C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.548016] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:430:plane 7C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [417.548274] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:430:plane 7C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [417.548620] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.22: staged scaling request for 20x20->1920x1080 scaler_users = 0x400000
<7> [417.548886] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:430:plane 7C] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.549134] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:430:plane 7C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.549392] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:430:plane 7C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.549639] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:430:plane 7C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [417.549884] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:430:plane 7C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [417.550216] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.22: staged scaling request for 20x20->1920x1080 scaler_users = 0x400000
<7> [417.550481] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:430:plane 7C] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.550732] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:430:plane 7C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.550979] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:430:plane 7C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.551268] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:430:plane 7C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [417.551516] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:430:plane 7C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [417.551778] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 594000 num active planes 1
<7> [417.552033] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [417.552299] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [417.552602] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:446:pipe C] attached scaler id 2.0 to PLANE:430
<7> [417.563197] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl
<7> [417.563267] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:430:plane 7C] because [FB:639] is removed
<7> [417.563295] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:446:pipe C] scaler_user index 2.22: Staged freeing scaler id 0 scaler_users = 0x0
<7> [417.563549] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:430:plane 7C] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [417.563768] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:430:plane 7C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [417.563985] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:430:plane 7C] lines 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.564233] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:430:plane 7C] blocks 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.564449] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:430:plane 7C] min_ddb 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.564692] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:446:pipe C] data rate 0 num active planes 0
<7> [417.564914] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<6> [417.580592] [IGT] kms_plane_scaling: finished subtest pipe-C, SUCCESS
<6> [417.581408] [IGT] kms_plane_scaling: starting dynamic subtest pipe-D
<7> [417.583163] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK for addr: 003a w(1)
<7> [417.583353] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK on first message, retry
<7> [417.583661] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK for addr: 003a w(1)
<7> [417.583838] i915 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6)
<7> [417.584310] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK for addr: 003a w(1)
<7> [417.584477] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK on first message, retry
<7> [417.584783] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK for addr: 003a w(1)
<7> [417.584959] i915 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6)
<7> [417.585414] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK for addr: 003a w(1)
<7> [417.585579] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK on first message, retry
<7> [417.585890] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK for addr: 003a w(1)
<7> [417.586065] i915 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6)
<7> [417.587204] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:639]
<7> [417.589468] i915 0000:03:00.0: [drm:intel_atomic_check [i915]] [CONNECTOR:599:HDMI-A-1] Limiting display bpp to 24 (EDID bpp 0, max requested bpp 36, max platform bpp 36)
<7> [417.589659] i915 0000:03:00.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24)
<7> [417.589825] i915 0000:03:00.0: [drm:intel_atomic_check [i915]] [CRTC:584:pipe D] hw max bpp: 24, pipe bpp: 24, dithering: 0
<7> [417.590007] i915 0000:03:00.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:586:DDI A/PHY A] [CRTC:584:pipe D]
<7> [417.590188] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.enable (expected yes, found no)
<7> [417.590370] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.active (expected yes, found no)
<7> [417.590552] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in cpu_transcoder (expected 2, found -1)
<7> [417.590735] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in lane_count (expected 4, found 0)
<7> [417.590916] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000)
<7> [417.591095] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [417.591278] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)
<7> [417.591458] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2200, found 0)
<7> [417.591639] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)
<7> [417.591818] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2200, found 0)
<7> [417.591998] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0)
<7> [417.592184] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2052, found 0)
<7> [417.592365] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)
<7> [417.592545] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)
<7> [417.592723] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0)
<7> [417.592902] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0)
<7> [417.593080] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0)
<7> [417.593305] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0)
<7> [417.593483] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)
<7> [417.593661] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2200, found 0)
<7> [417.593839] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)
<7> [417.594018] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2200, found 0)
<7> [417.594206] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0)
<7> [417.594385] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2052, found 0)
<7> [417.594563] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)
<7> [417.594741] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)
<7> [417.594919] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0)
<7> [417.595097] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0)
<7> [417.595280] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0)
<7> [417.595458] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0)
<7> [417.595637] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [417.595814] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)
<7> [417.595997] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)
<7> [417.596183] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in pipe_bpp (expected 24, found 0)
<7> [417.596363] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 148500, found 0)
<7> [417.596542] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 148500, found 0)
<7> [417.596722] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:446:pipe C] fastset requirement not met in port_clock (expected 148500, found 0)
<7> [417.596901] i915 0000:03:00.0: [drm:intel_atomic_check [i915]] [CRTC:446:pipe C] fastset requirement not met, forcing full modeset
<7> [417.597079] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.enable (expected no, found yes)
<7> [417.597318] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.active (expected no, found yes)
<7> [417.597499] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in cpu_transcoder (expected -1, found 3)
<7> [417.597679] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in lane_count (expected 0, found 4)
<7> [417.597859] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040)
<7> [417.598039] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [417.598225] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)
<7> [417.598406] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2200)
<7> [417.598585] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)
<7> [417.598765] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2200)
<7> [417.598944] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008)
<7> [417.599125] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2052)
<7> [417.599311] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)
<7> [417.599492] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)
<7> [417.599671] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084)
<7> [417.599850] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089)
<7> [417.600028] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125)
<7> [417.600213] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125)
<7> [417.600393] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)
<7> [417.600572] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2200)
<7> [417.600753] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)
<7> [417.600934] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2200)
<7> [417.601116] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008)
<7> [417.601306] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2052)
<7> [417.601486] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)
<7> [417.601666] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)
<7> [417.601846] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084)
<7> [417.602032] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089)
<7> [417.602234] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125)
<7> [417.602397] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125)
<7> [417.602559] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [417.602722] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)
<7> [417.602884] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)
<7> [417.603048] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in pipe_bpp (expected 0, found 24)
<7> [417.603252] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 148500)
<7> [417.603416] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 148500)
<7> [417.603580] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in port_clock (expected 0, found 148500)
<7> [417.603744] i915 0000:03:00.0: [drm:intel_atomic_check [i915]] [CRTC:584:pipe D] fastset requirement not met, forcing full modeset
<7> [417.603910] i915 0000:03:00.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:446:pipe C] releasing DPLL 0
<7> [417.604092] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.24: staged scaling request for 20x20->1920x1080 scaler_users = 0x1000000
<7> [417.604318] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [CRTC:446:pipe C] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x4 -> 0x8
<7> [417.604478] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [CRTC:584:pipe D] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x4 -> 0x8
<7> [417.604643] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:440:cursor C] ddb (2012 - 2048) -> ( 0 - 0), size 36 -> 0
<7> [417.604801] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:448:plane 1D] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.604958] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:578:cursor D] ddb ( 0 - 0) -> (2012 - 2048), size 0 -> 36
<7> [417.605114] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 1D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.605313] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 1D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.605471] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 1D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [417.605628] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 1D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [417.605810] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 594000 num active planes 1
<7> [417.605972] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [417.606132] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [417.606353] i915 0000:03:00.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:446:pipe C] min cdclk: 74250 kHz -> 0 kHz
<7> [417.606515] i915 0000:03:00.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:584:pipe D] min cdclk: 0 kHz -> 74250 kHz
<7> [417.606700] i915 0000:03:00.0: [drm:intel_find_dpll [i915]] [CRTC:584:pipe D] allocated DPLL 0
<7> [417.606863] i915 0000:03:00.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:584:pipe D] reserving DPLL 0
<7> [417.607028] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:584:pipe D] attached scaler id 3.0 to PLANE:448
<7> [417.607228] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [CRTC:446:pipe C] enable: no [modeset]
<7> [417.607392] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:310:plane 1C] fb: [NOFB], visible: no
<7> [417.607555] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:340:plane 2C] fb: [NOFB], visible: no
<7> [417.607719] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:370:plane 3C] fb: [NOFB], visible: no
<7> [417.607882] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:400:plane 4C] fb: [NOFB], visible: no
<7> [417.608045] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:410:plane 5C] fb: [NOFB], visible: no
<7> [417.608249] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:420:plane 6C] fb: [NOFB], visible: no
<7> [417.608411] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:430:plane 7C] fb: [NOFB], visible: no
<7> [417.608574] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:440:cursor C] fb: [NOFB], visible: no
<7> [417.608736] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [CRTC:584:pipe D] enable: yes [modeset]
<7> [417.608899] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB
<7> [417.609062] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: D, pipe bpp: 24, dithering: 0
<7> [417.609263] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>
<7> [417.609426] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [417.609589] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0
<7> [417.609750] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0
<7> [417.609911] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7> [417.610073] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2
<7> [417.610274] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [417.610437] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 42, guardband: 44 vsync start: 0, vsync end: 0
<7> [417.610601] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1125, vmax vtotal: 1125
<7> [417.610763] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [417.610927] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [417.611091] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [417.611296] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5
<7> [417.611458] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [417.611620] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5
<7> [417.611783] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] port clock: 148500, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 74250
<7> [417.611946] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] linetime: 119, ips linetime: 0
<7> [417.612109] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x1000000, scaler_id: -1, scaling_filter: 0
<7> [417.612312] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [417.612475] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0
<7> [417.612637] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1001d0, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0
<7> [417.612800] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [417.612960] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [417.613121] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [417.613327] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [417.613489] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [417.613653] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [417.613815] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [417.613976] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [417.614137] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [417.614338] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [417.614500] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [417.614663] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [417.614826] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [417.614987] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:448:plane 1D] fb: [FB:639] 20x20 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [417.615177] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: 0, scaling_filter: 0
<7> [417.615356] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] src: 20.000000x20.000000+0.000000+0.000000 dst: 1920x1080+0+0
<7> [417.615519] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:478:plane 2D] fb: [NOFB], visible: no
<7> [417.615680] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:508:plane 3D] fb: [NOFB], visible: no
<7> [417.615841] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:538:plane 4D] fb: [NOFB], visible: no
<7> [417.616003] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:548:plane 5D] fb: [NOFB], visible: no
<7> [417.616191] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:558:plane 6D] fb: [NOFB], visible: no
<7> [417.616367] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:568:plane 7D] fb: [NOFB], visible: no
<7> [417.616529] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:578:cursor D] fb: [NOFB], visible: no
<7> [417.617270] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling PW_5
<7> [417.617532] i915 0000:03:00.0: [drm:intel_disable_transcoder [i915]] disabling pipe C
<7> [417.630259] i915 0000:03:00.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A
<7> [417.630463] i915 0000:03:00.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x4, on? 1) for [CRTC:446:pipe C]
<7> [417.630659] i915 0000:03:00.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0
<7> [417.630838] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:586:DDI A/PHY A]
<7> [417.631001] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:588:DP-MST A]
<7> [417.631170] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:589:DP-MST B]
<7> [417.631332] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:590:DP-MST C]
<7> [417.631495] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:591:DP-MST D]
<7> [417.631656] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:605:DDI B/PHY B]
<7> [417.631816] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:609:DDI TC1/PHY C]
<7> [417.631975] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:611:DP-MST A]
<7> [417.632135] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:612:DP-MST B]
<7> [417.632333] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:613:DP-MST C]
<7> [417.632496] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:614:DP-MST D]
<7> [417.632656] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:621:DDI TC2/PHY D]
<7> [417.632815] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:623:DP-MST A]
<7> [417.632976] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:624:DP-MST B]
<7> [417.633136] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:625:DP-MST C]
<7> [417.633336] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:626:DP-MST D]
<7> [417.633497] i915 0000:03:00.0: [drm:verify_connector_state [i915]] [CONNECTOR:587:DP-1]
<7> [417.633695] i915 0000:03:00.0: [drm:verify_connector_state [i915]] [CONNECTOR:606:HDMI-A-2]
<7> [417.633893] i915 0000:03:00.0: [drm:verify_connector_state [i915]] [CONNECTOR:610:DP-2]
<7> [417.634089] i915 0000:03:00.0: [drm:verify_connector_state [i915]] [CONNECTOR:618:HDMI-A-3]
<7> [417.634328] i915 0000:03:00.0: [drm:verify_connector_state [i915]] [CONNECTOR:622:DP-3]
<7> [417.634525] i915 0000:03:00.0: [drm:verify_connector_state [i915]] [CONNECTOR:630:HDMI-A-4]
<7> [417.634809] i915 0000:03:00.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x8, on? 0) for [CRTC:584:pipe D]
<7> [417.634977] i915 0000:03:00.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0
<7> [417.635236] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A
<7> [417.635479] i915 0000:03:00.0: [drm:intel_enable_transcoder [i915]] enabling pipe D
<7> [417.653395] i915 0000:03:00.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:446:pipe C]
<7> [417.654073] i915 0000:03:00.0: [drm:verify_connector_state [i915]] [CONNECTOR:599:HDMI-A-1]
<7> [417.654371] i915 0000:03:00.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:584:pipe D]
<7> [417.656189] i915 0000:03:00.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe D
<7> [417.656396] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl
<7> [417.656447] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:448:plane 1D] because [FB:639] is removed
<7> [417.656472] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.24: Staged freeing scaler id 0 scaler_users = 0x0
<7> [417.656649] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:448:plane 1D] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [417.656807] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 1D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [417.656964] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 1D] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.657122] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 1D] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.657327] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 1D] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.657504] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 0 num active planes 0
<7> [417.657670] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [417.670422] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:640]
<7> [417.670524] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.24: staged scaling request for 20x20->1920x1080 scaler_users = 0x1000000
<7> [417.670709] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:448:plane 1D] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.670869] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 1D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.671026] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 1D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.671216] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 1D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [417.671390] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 1D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [417.671568] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 594000 num active planes 1
<7> [417.671731] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [417.671893] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [417.672085] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:584:pipe D] attached scaler id 3.0 to PLANE:448
<7> [417.686912] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:640] from all active usage due to RMFB ioctl
<7> [417.686964] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:448:plane 1D] because [FB:640] is removed
<7> [417.686986] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.24: Staged freeing scaler id 0 scaler_users = 0x0
<7> [417.687214] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:448:plane 1D] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [417.687388] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 1D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [417.687547] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 1D] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.687705] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 1D] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.687864] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 1D] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.688040] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 0 num active planes 0
<7> [417.688241] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [417.703670] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:640]
<7> [417.703771] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.24: staged scaling request for 20x20->1920x1080 scaler_users = 0x1000000
<7> [417.703961] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:448:plane 1D] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.704121] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 1D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.704291] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 1D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.704451] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 1D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [417.704608] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 1D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [417.704786] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 594000 num active planes 1
<7> [417.704948] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [417.705107] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [417.705345] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:584:pipe D] attached scaler id 3.0 to PLANE:448
<7> [417.720292] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:640] from all active usage due to RMFB ioctl
<7> [417.720343] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:448:plane 1D] because [FB:640] is removed
<7> [417.720364] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.24: Staged freeing scaler id 0 scaler_users = 0x0
<7> [417.720554] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:448:plane 1D] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [417.720714] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 1D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [417.720872] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 1D] lines 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.721032] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 1D] blocks 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.721201] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:448:plane 1D] min_ddb 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.721378] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 0 num active planes 0
<7> [417.721542] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [417.737114] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:640]
<7> [417.737253] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.25: staged scaling request for 20x20->1920x1080 scaler_users = 0x2000000
<7> [417.737452] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:478:plane 2D] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.737623] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 2D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.737794] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 2D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.737964] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 2D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [417.738133] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 2D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [417.738334] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 594000 num active planes 1
<7> [417.738510] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [417.738682] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [417.738889] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:584:pipe D] attached scaler id 3.0 to PLANE:478
<7> [417.753538] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:640] from all active usage due to RMFB ioctl
<7> [417.753598] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:478:plane 2D] because [FB:640] is removed
<7> [417.753623] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.25: Staged freeing scaler id 0 scaler_users = 0x0
<7> [417.753834] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:478:plane 2D] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [417.754018] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 2D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [417.754221] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 2D] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.754403] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 2D] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.754586] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 2D] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.754789] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 0 num active planes 0
<7> [417.754975] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [417.770441] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:640]
<7> [417.770562] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.25: staged scaling request for 20x20->1920x1080 scaler_users = 0x2000000
<7> [417.770796] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:478:plane 2D] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.770995] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 2D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.771208] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 2D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.771407] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 2D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [417.771607] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 2D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [417.771828] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 594000 num active planes 1
<7> [417.772058] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [417.772292] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [417.772557] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:584:pipe D] attached scaler id 3.0 to PLANE:478
<7> [417.786943] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:640] from all active usage due to RMFB ioctl
<7> [417.787021] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:478:plane 2D] because [FB:640] is removed
<7> [417.787052] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.25: Staged freeing scaler id 0 scaler_users = 0x0
<7> [417.787353] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:478:plane 2D] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [417.787594] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 2D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [417.787832] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 2D] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.788074] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 2D] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.788324] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 2D] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.788592] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 0 num active planes 0
<7> [417.788836] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [417.803836] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:640]
<7> [417.803981] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.25: staged scaling request for 20x20->1920x1080 scaler_users = 0x2000000
<7> [417.804276] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:478:plane 2D] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.804518] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 2D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.804757] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 2D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.804998] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 2D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [417.805248] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 2D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [417.805514] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 594000 num active planes 1
<7> [417.805760] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [417.806003] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [417.806311] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:584:pipe D] attached scaler id 3.0 to PLANE:478
<7> [417.820294] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:640] from all active usage due to RMFB ioctl
<7> [417.820375] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:478:plane 2D] because [FB:640] is removed
<7> [417.820406] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.25: Staged freeing scaler id 0 scaler_users = 0x0
<7> [417.820684] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:478:plane 2D] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [417.820925] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 2D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [417.821178] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 2D] lines 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.821417] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 2D] blocks 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.821655] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:478:plane 2D] min_ddb 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.821921] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 0 num active planes 0
<7> [417.822189] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [417.837105] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:640]
<7> [417.837300] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.26: staged scaling request for 20x20->1920x1080 scaler_users = 0x4000000
<7> [417.837582] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:508:plane 3D] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.837823] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.838062] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.838313] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [417.838552] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [417.838819] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 594000 num active planes 1
<7> [417.839065] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [417.839320] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [417.839616] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:584:pipe D] attached scaler id 3.0 to PLANE:508
<7> [417.853606] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:640] from all active usage due to RMFB ioctl
<7> [417.853681] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:508:plane 3D] because [FB:640] is removed
<7> [417.853712] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.26: Staged freeing scaler id 0 scaler_users = 0x0
<7> [417.853987] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:508:plane 3D] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [417.854249] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [417.854488] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.854728] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.854966] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.855245] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 0 num active planes 0
<7> [417.855490] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [417.870489] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:640]
<7> [417.870634] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.26: staged scaling request for 20x20->1920x1080 scaler_users = 0x4000000
<7> [417.870915] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:508:plane 3D] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.871168] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.871407] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.871647] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [417.871886] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [417.872226] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.26: staged scaling request for 20x20->1920x1080 scaler_users = 0x4000000
<7> [417.872482] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:508:plane 3D] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.872720] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.872958] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.873213] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [417.873453] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [417.873768] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.26: staged scaling request for 20x20->1920x1080 scaler_users = 0x4000000
<7> [417.874025] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:508:plane 3D] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.874273] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.874511] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.874750] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [417.874989] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [417.875248] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 594000 num active planes 1
<7> [417.875495] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [417.875737] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [417.876030] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:584:pipe D] attached scaler id 3.0 to PLANE:508
<7> [417.886893] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:640] from all active usage due to RMFB ioctl
<7> [417.886969] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:508:plane 3D] because [FB:640] is removed
<7> [417.887000] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.26: Staged freeing scaler id 0 scaler_users = 0x0
<7> [417.887299] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:508:plane 3D] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [417.887541] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [417.887783] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.888023] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.888286] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.888554] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 0 num active planes 0
<7> [417.888802] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [417.903775] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:640]
<7> [417.903904] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.26: staged scaling request for 20x20->1920x1080 scaler_users = 0x4000000
<7> [417.904168] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:508:plane 3D] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.904381] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.904590] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.904803] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [417.905014] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [417.905315] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.26: staged scaling request for 20x20->1920x1080 scaler_users = 0x4000000
<7> [417.905540] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:508:plane 3D] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.905751] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.905959] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.906180] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [417.906390] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [417.906671] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.26: staged scaling request for 20x20->1920x1080 scaler_users = 0x4000000
<7> [417.906896] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:508:plane 3D] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.907106] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.907325] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.907537] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [417.907749] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [417.907969] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 594000 num active planes 1
<7> [417.908192] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [417.908406] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [417.908665] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:584:pipe D] attached scaler id 3.0 to PLANE:508
<7> [417.920268] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:640] from all active usage due to RMFB ioctl
<7> [417.920329] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:508:plane 3D] because [FB:640] is removed
<7> [417.920354] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.26: Staged freeing scaler id 0 scaler_users = 0x0
<7> [417.920574] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:508:plane 3D] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [417.920762] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [417.920952] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] lines 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.921149] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] blocks 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.921336] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:508:plane 3D] min_ddb 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.921547] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 0 num active planes 0
<7> [417.921739] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [417.937108] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:640]
<7> [417.937248] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.27: staged scaling request for 20x20->1920x1080 scaler_users = 0x8000000
<7> [417.937452] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:538:plane 4D] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.937624] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:538:plane 4D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.937795] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:538:plane 4D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.937964] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:538:plane 4D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [417.938140] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:538:plane 4D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [417.938329] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 594000 num active planes 1
<7> [417.938504] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [417.938676] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [417.938883] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:584:pipe D] attached scaler id 3.0 to PLANE:538
<7> [417.953500] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:640] from all active usage due to RMFB ioctl
<7> [417.953556] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:538:plane 4D] because [FB:640] is removed
<7> [417.953579] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.27: Staged freeing scaler id 0 scaler_users = 0x0
<7> [417.953777] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:538:plane 4D] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [417.953947] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:538:plane 4D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [417.954116] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:538:plane 4D] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.954298] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:538:plane 4D] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.954470] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:538:plane 4D] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.954658] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 0 num active planes 0
<7> [417.954835] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [417.970410] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:640]
<7> [417.970514] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.27: staged scaling request for 20x20->1920x1080 scaler_users = 0x8000000
<7> [417.970717] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:538:plane 4D] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [417.970891] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:538:plane 4D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [417.971059] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:538:plane 4D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [417.971240] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:538:plane 4D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [417.971411] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:538:plane 4D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [417.971600] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 594000 num active planes 1
<7> [417.971776] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [417.971949] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [417.972167] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:584:pipe D] attached scaler id 3.0 to PLANE:538
<7> [417.986925] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:640] from all active usage due to RMFB ioctl
<7> [417.986985] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:538:plane 4D] because [FB:640] is removed
<7> [417.987009] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.27: Staged freeing scaler id 0 scaler_users = 0x0
<7> [417.987238] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:538:plane 4D] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [417.987424] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:538:plane 4D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [417.987606] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:538:plane 4D] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.987789] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:538:plane 4D] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.987972] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:538:plane 4D] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [417.988186] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 0 num active planes 0
<7> [417.988376] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [418.003708] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:640]
<7> [418.003829] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.27: staged scaling request for 20x20->1920x1080 scaler_users = 0x8000000
<7> [418.004064] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:538:plane 4D] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [418.004278] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:538:plane 4D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [418.004475] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:538:plane 4D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [418.004674] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:538:plane 4D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [418.004872] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:538:plane 4D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [418.005093] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 594000 num active planes 1
<7> [418.005307] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [418.005508] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [418.005753] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:584:pipe D] attached scaler id 3.0 to PLANE:538
<7> [418.020287] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:640] from all active usage due to RMFB ioctl
<7> [418.020353] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:538:plane 4D] because [FB:640] is removed
<7> [418.020380] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.27: Staged freeing scaler id 0 scaler_users = 0x0
<7> [418.020614] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:538:plane 4D] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [418.020812] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:538:plane 4D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [418.021008] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:538:plane 4D] lines 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [418.021218] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:538:plane 4D] blocks 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [418.021416] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:538:plane 4D] min_ddb 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [418.021636] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 0 num active planes 0
<7> [418.021842] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [418.037237] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:640]
<7> [418.037412] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.28: staged scaling request for 20x20->1920x1080 scaler_users = 0x10000000
<7> [418.037691] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:548:plane 5D] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [418.037929] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:548:plane 5D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [418.038184] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:548:plane 5D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [418.038423] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:548:plane 5D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [418.038661] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:548:plane 5D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [418.038927] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 594000 num active planes 1
<7> [418.039189] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [418.039433] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [418.039726] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:584:pipe D] attached scaler id 3.0 to PLANE:548
<7> [418.053613] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:640] from all active usage due to RMFB ioctl
<7> [418.053692] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:548:plane 5D] because [FB:640] is removed
<7> [418.053722] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.28: Staged freeing scaler id 0 scaler_users = 0x0
<7> [418.054001] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:548:plane 5D] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [418.054261] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:548:plane 5D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [418.054503] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:548:plane 5D] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [418.054743] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:548:plane 5D] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [418.054984] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:548:plane 5D] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [418.055265] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 0 num active planes 0
<7> [418.055512] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [418.070511] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:640]
<7> [418.070654] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.28: staged scaling request for 20x20->1920x1080 scaler_users = 0x10000000
<7> [418.070938] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:548:plane 5D] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [418.071193] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:548:plane 5D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [418.071433] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:548:plane 5D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [418.071676] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:548:plane 5D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [418.071915] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:548:plane 5D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [418.072198] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 594000 num active planes 1
<7> [418.072448] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [418.072690] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [418.072978] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:584:pipe D] attached scaler id 3.0 to PLANE:548
<7> [418.086944] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:640] from all active usage due to RMFB ioctl
<7> [418.087023] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:548:plane 5D] because [FB:640] is removed
<7> [418.087055] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.28: Staged freeing scaler id 0 scaler_users = 0x0
<7> [418.087355] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:548:plane 5D] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [418.087598] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:548:plane 5D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [418.087836] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:548:plane 5D] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [418.088076] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:548:plane 5D] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [418.088325] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:548:plane 5D] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [418.088590] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 0 num active planes 0
<7> [418.088839] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [418.103847] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:640]
<7> [418.103989] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.28: staged scaling request for 20x20->1920x1080 scaler_users = 0x10000000
<7> [418.104287] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:548:plane 5D] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [418.104527] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:548:plane 5D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [418.104765] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:548:plane 5D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [418.105007] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:548:plane 5D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [418.105260] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:548:plane 5D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [418.105527] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 594000 num active planes 1
<7> [418.105773] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [418.106017] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [418.106320] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:584:pipe D] attached scaler id 3.0 to PLANE:548
<7> [418.120280] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:640] from all active usage due to RMFB ioctl
<7> [418.120355] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:548:plane 5D] because [FB:640] is removed
<7> [418.120386] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.28: Staged freeing scaler id 0 scaler_users = 0x0
<7> [418.120665] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:548:plane 5D] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [418.120905] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:548:plane 5D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [418.121153] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:548:plane 5D] lines 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [418.121394] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:548:plane 5D] blocks 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [418.121636] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:548:plane 5D] min_ddb 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [418.121904] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 0 num active planes 0
<7> [418.122162] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [418.137106] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:640]
<7> [418.137339] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.29: staged scaling request for 20x20->1920x1080 scaler_users = 0x20000000
<7> [418.137620] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:558:plane 6D] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [418.137861] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:558:plane 6D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [418.138100] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:558:plane 6D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [418.138361] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:558:plane 6D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [418.138602] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:558:plane 6D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [418.138951] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.29: staged scaling request for 20x20->1920x1080 scaler_users = 0x20000000
<7> [418.139221] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:558:plane 6D] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [418.139461] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:558:plane 6D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [418.139698] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:558:plane 6D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [418.139937] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:558:plane 6D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [418.140183] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:558:plane 6D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [418.140434] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 594000 num active planes 1
<7> [418.140679] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [418.140922] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [418.141228] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:584:pipe D] attached scaler id 3.0 to PLANE:558
<7> [418.153618] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:640] from all active usage due to RMFB ioctl
<7> [418.153695] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:558:plane 6D] because [FB:640] is removed
<7> [418.153727] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.29: Staged freeing scaler id 0 scaler_users = 0x0
<7> [418.154003] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:558:plane 6D] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [418.154265] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:558:plane 6D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [418.154505] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:558:plane 6D] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [418.154745] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:558:plane 6D] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [418.154984] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:558:plane 6D] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [418.155264] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 0 num active planes 0
<7> [418.155509] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [418.170494] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:640]
<7> [418.170639] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.29: staged scaling request for 20x20->1920x1080 scaler_users = 0x20000000
<7> [418.170921] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:558:plane 6D] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [418.171178] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:558:plane 6D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [418.171418] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:558:plane 6D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [418.171658] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:558:plane 6D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [418.171899] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:558:plane 6D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [418.172237] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.29: staged scaling request for 20x20->1920x1080 scaler_users = 0x20000000
<7> [418.172495] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:558:plane 6D] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [418.172735] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:558:plane 6D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [418.172974] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:558:plane 6D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [418.173233] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:558:plane 6D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [418.173473] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:558:plane 6D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [418.173787] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.29: staged scaling request for 20x20->1920x1080 scaler_users = 0x20000000
<7> [418.174044] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:558:plane 6D] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [418.174294] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:558:plane 6D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [418.174531] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:558:plane 6D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [418.174773] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:558:plane 6D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [418.175012] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:558:plane 6D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [418.175275] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 594000 num active planes 1
<7> [418.175521] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [418.175764] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [418.176059] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:584:pipe D] attached scaler id 3.0 to PLANE:558
<7> [418.186896] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:640] from all active usage due to RMFB ioctl
<7> [418.186977] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:558:plane 6D] because [FB:640] is removed
<7> [418.187005] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.29: Staged freeing scaler id 0 scaler_users = 0x0
<7> [418.187267] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:558:plane 6D] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [418.187481] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:558:plane 6D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [418.187690] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:558:plane 6D] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [418.187900] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:558:plane 6D] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [418.188109] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:558:plane 6D] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [418.188354] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 0 num active planes 0
<7> [418.188571] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [418.203744] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:640]
<7> [418.203859] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.29: staged scaling request for 20x20->1920x1080 scaler_users = 0x20000000
<7> [418.204081] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:558:plane 6D] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [418.204284] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:558:plane 6D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [418.204471] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:558:plane 6D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [418.204662] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:558:plane 6D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [418.204853] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:558:plane 6D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [418.205065] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 594000 num active planes 1
<7> [418.205273] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [418.205464] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [418.205692] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:584:pipe D] attached scaler id 3.0 to PLANE:558
<7> [418.220267] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:640] from all active usage due to RMFB ioctl
<7> [418.220329] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:558:plane 6D] because [FB:640] is removed
<7> [418.220354] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.29: Staged freeing scaler id 0 scaler_users = 0x0
<7> [418.220575] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:558:plane 6D] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [418.220764] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:558:plane 6D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [418.220950] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:558:plane 6D] lines 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [418.221146] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:558:plane 6D] blocks 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [418.221332] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:558:plane 6D] min_ddb 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [418.221542] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 0 num active planes 0
<7> [418.221735] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [418.237138] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:640]
<7> [418.237278] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.30: staged scaling request for 20x20->1920x1080 scaler_users = 0x40000000
<7> [418.237495] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:568:plane 7D] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [418.237683] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:568:plane 7D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [418.237869] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:568:plane 7D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [418.238059] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:568:plane 7D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [418.238261] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:568:plane 7D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [418.238469] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 594000 num active planes 1
<7> [418.238663] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [418.238854] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [418.239083] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:584:pipe D] attached scaler id 3.0 to PLANE:568
<7> [418.253511] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:640] from all active usage due to RMFB ioctl
<7> [418.253572] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:568:plane 7D] because [FB:640] is removed
<7> [418.253597] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.30: Staged freeing scaler id 0 scaler_users = 0x0
<7> [418.253816] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:568:plane 7D] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [418.254007] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:568:plane 7D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [418.254210] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:568:plane 7D] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [418.254400] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:568:plane 7D] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [418.254588] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:568:plane 7D] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [418.254795] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 0 num active planes 0
<7> [418.254990] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [418.270429] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:640]
<7> [418.270544] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.30: staged scaling request for 20x20->1920x1080 scaler_users = 0x40000000
<7> [418.270767] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:568:plane 7D] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [418.270956] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:568:plane 7D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [418.271156] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:568:plane 7D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [418.271344] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:568:plane 7D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0
<7> [418.271531] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:568:plane 7D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0
<7> [418.271740] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 594000 num active planes 1
<7> [418.271950] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [418.272165] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [418.272416] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:584:pipe D] attached scaler id 3.0 to PLANE:568
<7> [418.286940] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:640] from all active usage due to RMFB ioctl
<7> [418.287013] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:568:plane 7D] because [FB:640] is removed
<7> [418.287042] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.30: Staged freeing scaler id 0 scaler_users = 0x0
<7> [418.287315] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:568:plane 7D] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [418.287540] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:568:plane 7D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [418.287766] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:568:plane 7D] lines 3, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [418.287990] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:568:plane 7D] blocks 6, 11, 11, 11, 17, 17, 19, 21, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [418.288227] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:568:plane 7D] min_ddb 8, 14, 14, 14, 20, 20, 22, 25, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [418.288475] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 0 num active planes 0
<7> [418.288704] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<7> [418.303812] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:640]
<7> [418.303947] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.30: staged scaling request for 20x20->1920x1080 scaler_users = 0x40000000
<7> [418.304230] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:568:plane 7D] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [418.304457] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:568:plane 7D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [418.304680] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:568:plane 7D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [418.304903] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:568:plane 7D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0
<7> [418.305139] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:568:plane 7D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0
<7> [418.305394] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 594000 num active planes 1
<7> [418.305625] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [418.305851] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [418.306135] i915 0000:03:00.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:584:pipe D] attached scaler id 3.0 to PLANE:568
<7> [418.320290] i915 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:640] from all active usage due to RMFB ioctl
<7> [418.320364] i915 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:568:plane 7D] because [FB:640] is removed
<7> [418.320393] i915 0000:03:00.0: [drm:skl_update_scaler [i915]] [CRTC:584:pipe D] scaler_user index 3.30: Staged freeing scaler id 0 scaler_users = 0x0
<7> [418.320654] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:568:plane 7D] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0
<7> [418.320878] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:568:plane 7D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [418.321100] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:568:plane 7D] lines 4, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [418.321342] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:568:plane 7D] blocks 3, 4, 4, 4, 5, 5, 6, 6, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [418.321565] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:568:plane 7D] min_ddb 5, 7, 7, 7, 7, 7, 9, 9, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [418.321812] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:584:pipe D] data rate 0 num active planes 0
<7> [418.322041] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 0
<6> [418.337824] [IGT] kms_plane_scaling: finished subtest pipe-D, SUCCESS
<6> [418.338906] [IGT] kms_plane_scaling: finished subtest plane-upscale-20x20-with-modifiers, SUCCESS
<7> [418.340499] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK for addr: 003a w(1)
<7> [418.340733] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK on first message, retry
<7> [418.341091] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK for addr: 003a w(1)
<7> [418.341325] i915 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6)
<7> [418.341878] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK for addr: 003a w(1)
<7> [418.342096] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK on first message, retry
<7> [418.342469] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK for addr: 003a w(1)
<7> [418.342695] i915 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6)
<7> [418.343238] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK for addr: 003a w(1)
<7> [418.343451] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK on first message, retry
<7> [418.343813] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpa] NAK for addr: 003a w(1)
<7> [418.344041] i915 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6)
<7> [418.344516] i915 0000:03:00.0: [drm:drm_mode_addfb2] [FB:640]
<6> [418.345987] [IGT] kms_plane_scaling: exiting, ret=0
<7> [418.346463] i915 0000:03:00.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [418.371975] i915 0000:03:00.0: [drm:intel_atomic_check [i915]] [CONNECTOR:599:HDMI-A-1] Limiting display bpp to 24 (EDID bpp 0, max requested bpp 36, max platform bpp 36)
<7> [418.372391] i915 0000:03:00.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24)
<7> [418.372743] i915 0000:03:00.0: [drm:intel_atomic_check [i915]] [CRTC:170:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0
<7> [418.373177] i915 0000:03:00.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:586:DDI A/PHY A] [CRTC:170:pipe A]
<7> [418.373535] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.enable (expected no, found yes)
<7> [418.373913] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.active (expected no, found yes)
<7> [418.374305] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)
<7> [418.374686] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in lane_count (expected 0, found 4)
<7> [418.375068] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040)
<7> [418.375637] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [418.376018] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)
<7> [418.376414] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2200)
<7> [418.376797] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)
<7> [418.377189] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2200)
<7> [418.377572] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008)
<7> [418.377951] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2052)
<7> [418.378342] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)
<7> [418.378723] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)
<7> [418.379104] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084)
<7> [418.379492] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089)
<7> [418.379870] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125)
<7> [418.380325] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125)
<7> [418.380707] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)
<7> [418.381086] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2200)
<7> [418.381484] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)
<7> [418.381865] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2200)
<7> [418.382258] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008)
<7> [418.382639] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2052)
<7> [418.383015] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)
<7> [418.383405] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)
<7> [418.383783] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084)
<7> [418.384173] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089)
<7> [418.384551] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125)
<7> [418.384931] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125)
<7> [418.385388] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [418.385766] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)
<7> [418.386160] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)
<7> [418.386539] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)
<7> [418.386916] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 148500)
<7> [418.387313] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 148500)
<7> [418.387690] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in port_clock (expected 0, found 148500)
<7> [418.388074] i915 0000:03:00.0: [drm:intel_atomic_check [i915]] [CRTC:170:pipe A] fastset requirement not met, forcing full modeset
<7> [418.388468] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.enable (expected yes, found no)
<7> [418.388845] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.active (expected yes, found no)
<7> [418.389232] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in cpu_transcoder (expected 3, found -1)
<7> [418.389610] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in lane_count (expected 4, found 0)
<7> [418.389986] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000)
<7> [418.390382] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [418.390760] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)
<7> [418.391153] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2200, found 0)
<7> [418.391534] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)
<7> [418.391914] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2200, found 0)
<7> [418.392318] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0)
<7> [418.392698] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2052, found 0)
<7> [418.393073] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)
<7> [418.393465] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)
<7> [418.393844] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0)
<7> [418.394231] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0)
<7> [418.394610] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0)
<7> [418.394990] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0)
<7> [418.395379] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)
<7> [418.395761] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2200, found 0)
<7> [418.396155] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)
<7> [418.396536] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2200, found 0)
<7> [418.396913] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0)
<7> [418.397252] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2052, found 0)
<7> [418.397567] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)
<7> [418.397881] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)
<7> [418.398206] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0)
<7> [418.398518] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0)
<7> [418.398832] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0)
<7> [418.399156] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0)
<7> [418.399467] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [418.399780] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)
<7> [418.400090] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)
<7> [418.400412] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in pipe_bpp (expected 24, found 0)
<7> [418.400725] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 148500, found 0)
<7> [418.401038] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 148500, found 0)
<7> [418.401362] i915 0000:03:00.0: [drm:intel_pipe_config_compare [i915]] [CRTC:584:pipe D] fastset requirement not met in port_clock (expected 148500, found 0)
<7> [418.401677] i915 0000:03:00.0: [drm:intel_atomic_check [i915]] [CRTC:584:pipe D] fastset requirement not met, forcing full modeset
<7> [418.401994] i915 0000:03:00.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:584:pipe D] releasing DPLL 0
<7> [418.402338] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [CRTC:170:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x8 -> 0x1
<7> [418.402597] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [CRTC:584:pipe D] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x8 -> 0x1
<7> [418.402867] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012
<7> [418.403133] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:164:cursor A] ddb ( 0 - 0) -> (2012 - 2048), size 0 -> 36
<7> [418.403391] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [418.403645] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 5, 5, 5, 8, 8, 9, 10, 0, 0, 0
<7> [418.403901] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 81, 81, 81, 129, 129, 145, 161, 30, 0, 0
<7> [418.404169] i915 0000:03:00.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 91, 91, 91, 143, 143, 161, 179, 31, 0, 0
<7> [418.404432] i915 0000:03:00.0: [drm:skl_compute_wm [i915]] [PLANE:578:cursor D] ddb (2012 - 2048) -> ( 0 - 0), size 36 -> 0
<7> [418.404722] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 594000 num active planes 1
<7> [418.404987] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 34000 required 594
<7> [418.405263] i915 0000:03:00.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [418.405558] i915 0000:03:00.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:170:pipe A] min cdclk: 0 kHz -> 74250 kHz
<7> [418.405823] i915 0000:03:00.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:584:pipe D] min cdclk: 74250 kHz -> 0 kHz
<7> [418.406130] i915 0000:03:00.0: [drm:intel_find_dpll [i915]] [CRTC:170:pipe A] allocated DPLL 0
<7> [418.406399] i915 0000:03:00.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:170:pipe A] reserving DPLL 0
<7> [418.406670] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [CRTC:170:pipe A] enable: yes [modeset]
<7> [418.406947] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB
<7> [418.407191] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
<7> [418.407421] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>
<7> [418.407653] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [418.407883] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0
<7> [418.408124] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0
<7> [418.408355] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7> [418.408589] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2
<7> [418.408819] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [418.409049] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 42, guardband: 44 vsync start: 0, vsync end: 0
<7> [418.409290] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1125, vmax vtotal: 1125
<7> [418.409520] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [418.409751] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [418.409982] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [418.410222] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5
<7> [418.410453] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [418.410688] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5
<7> [418.410920] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] port clock: 148500, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 74250
<7> [418.411167] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] linetime: 119, ips linetime: 0
<7> [418.411398] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [418.411631] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [418.411862] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0
<7> [418.412088] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1001d0, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0
<7> [418.412306] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [418.412511] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [418.412716] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [418.412921] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [418.413134] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [418.413338] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [418.413543] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [418.413749] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [418.413955] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [418.414168] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [418.414372] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [418.414575] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [418.414778] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [418.414984] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:633] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [418.415199] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [418.415403] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0
<7> [418.415610] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 2A] fb: [NOFB], visible: no
<7> [418.415815] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 3A] fb: [NOFB], visible: no
<7> [418.416019] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:124:plane 4A] fb: [NOFB], visible: no
<7> [418.416235] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:134:plane 5A] fb: [NOFB], visible: no
<7> [418.416441] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:144:plane 6A] fb: [NOFB], visible: no
<7> [418.416645] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:154:plane 7A] fb: [NOFB], visible: no
<7> [418.416850] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:164:cursor A] fb: [NOFB], visible: no
<7> [418.417051] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [CRTC:584:pipe D] enable: no [modeset]
<7> [418.417240] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:448:plane 1D] fb: [NOFB], visible: no
<7> [418.417424] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:478:plane 2D] fb: [NOFB], visible: no
<7> [418.417607] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:508:plane 3D] fb: [NOFB], visible: no
<7> [418.417791] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:538:plane 4D] fb: [NOFB], visible: no
<7> [418.417975] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:548:plane 5D] fb: [NOFB], visible: no
<7> [418.418165] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:558:plane 6D] fb: [NOFB], visible: no
<7> [418.418349] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:568:plane 7D] fb: [NOFB], visible: no
<7> [418.418531] i915 0000:03:00.0: [drm:intel_crtc_state_dump [i915]] [PLANE:578:cursor D] fb: [NOFB], visible: no
<7> [418.418976] i915 0000:03:00.0: [drm:intel_disable_transcoder [i915]] disabling pipe D
<7> [418.420134] i915 0000:03:00.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A
<7> [418.420363] i915 0000:03:00.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x8, on? 1) for [CRTC:584:pipe D]
<7> [418.420583] i915 0000:03:00.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0
<7> [418.420788] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:586:DDI A/PHY A]
<7> [418.420971] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:588:DP-MST A]
<7> [418.421164] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:589:DP-MST B]
<7> [418.421346] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:590:DP-MST C]
<7> [418.421526] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:591:DP-MST D]
<7> [418.421708] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:605:DDI B/PHY B]
<7> [418.421889] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:609:DDI TC1/PHY C]
<7> [418.422069] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:611:DP-MST A]
<7> [418.422240] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:612:DP-MST B]
<7> [418.422404] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:613:DP-MST C]
<7> [418.422568] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:614:DP-MST D]
<7> [418.422731] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:621:DDI TC2/PHY D]
<7> [418.422895] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:623:DP-MST A]
<7> [418.423058] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:624:DP-MST B]
<7> [418.423227] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:625:DP-MST C]
<7> [418.423394] i915 0000:03:00.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:626:DP-MST D]
<7> [418.423792] i915 0000:03:00.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:170:pipe A]
<7> [418.423961] i915 0000:03:00.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0
<7> [418.424188] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A
<7> [418.424438] i915 0000:03:00.0: [drm:intel_enable_transcoder [i915]] enabling pipe A
<7> [418.425042] i915 0000:03:00.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1
<7> [418.425221] i915 0000:03:00.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:34:plane 1A]
<7> [418.442049] i915 0000:03:00.0: [drm:verify_connector_state [i915]] [CONNECTOR:599:HDMI-A-1]
<7> [418.442371] i915 0000:03:00.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:170:pipe A]
<7> [418.443349] i915 0000:03:00.0: [drm:intel_power_well_disable [i915]] disabling PW_5
<7> [418.443576] i915 0000:03:00.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:584:pipe D]
<7> [418.444064] i915 0000:03:00.0: [drm:intel_power_well_disable [i915]] disabling PW_4
<7> [418.444308] i915 0000:03:00.0: [drm:intel_power_well_disable [i915]] disabling PW_3
<7> [418.444507] i915 0000:03:00.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [418.445250] i915 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [418.458592] Console: switching to colour frame buffer device 240x67
Created at 2026-01-30 14:46:17