<5>[ 0.000000] Linux version 6.19.0-rc7-CI_DRM_17902-g6a3c9a03d943+ (kbuild@gfx-ci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Thu Jan 29 03:04:21 UTC 2026 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] Hygon HygonGenuine <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] zhaoxin Shanghai <4>[ 0.000000] x86/CPU: Running old microcode <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000060a3efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000060a3f000-0x0000000063db6fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000063db7000-0x0000000063edbfff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x0000000063edc000-0x0000000063ffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x0000000063fff000-0x0000000063ffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000064000000-0x00000000787fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000000ffffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x63ffe000 ACPI 2.0=0x63ffe014 TPMFinalLog=0x63e11000 SMBIOS=0x60b16000 MEMATTR=0x5bd87018 ESRT=0x5ae00c18 MOKvar=0x60c4b000 TPMEventLog=0x63f0e018 <6>[ 0.000000] efi: Remove mem289: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem291: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.6 present. <6>[ 0.000000] DMI: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024 <6>[ 0.000000] DMI: Memory slots populated: 8/8 <6>[ 0.000000] tsc: Detected 3400.000 MHz processor <6>[ 0.000000] tsc: Detected 3379.200 MHz TSC <7>[ 0.000011] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000012] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000016] last_pfn = 0x880000 max_arch_pfn = 0x400000000 <6>[ 0.000020] MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs <6>[ 0.000022] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.000609] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000611] last_pfn = 0x64000 max_arch_pfn = 0x400000000 <6>[ 0.005042] esrt: Reserving ESRT space from 0x000000005ae00c18 to 0x000000005ae00d40. <7>[ 0.005053] e820: update [mem 0x5ae00000-0x5ae00fff] usable ==> reserved <6>[ 0.005081] Using GB pages for direct mapping <6>[ 0.005863] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes <6>[ 0.005866] printk: early log buf free: 258744(98%) <6>[ 0.005867] Secure boot disabled <6>[ 0.005870] ACPI: Early table checksum verification disabled <6>[ 0.005875] ACPI: RSDP 0x0000000063FFE014 000024 (v02 INTEL ) <6>[ 0.005880] ACPI: XSDT 0x0000000063F15228 000184 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005885] ACPI: FACP 0x0000000063FDC000 000114 (v06 INTEL MTL 00000002 01000013) <6>[ 0.005889] ACPI: DSDT 0x0000000063F55000 083F8A (v02 INTEL MTL 00000002 01000013) <6>[ 0.005892] ACPI: FACS 0x0000000063DF7000 000040 <6>[ 0.005894] ACPI: SSDT 0x0000000063FFC000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.005896] ACPI: SSDT 0x0000000063FFB000 00070D (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.005898] ACPI: SSDT 0x0000000063FFA000 0005E4 (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.005900] ACPI: SSDT 0x0000000063FF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.005902] ACPI: SSDT 0x0000000063FF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.005903] ACPI: SSDT 0x0000000063FF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.005905] ACPI: SSDT 0x0000000063FF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.005907] ACPI: SSDT 0x0000000063FF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.005909] ACPI: SSDT 0x0000000063FF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.005911] ACPI: SSDT 0x0000000063FED000 003BC8 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.005913] ACPI: DTPR 0x0000000063FEC000 000098 (v01 00000000 00000000) <6>[ 0.005915] ACPI: SSDT 0x0000000063FEB000 000D03 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.005917] ACPI: SSDT 0x0000000063FE8000 002494 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.005919] ACPI: SSDT 0x0000000063FDE000 009AB7 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.005921] ACPI: SSDT 0x0000000063FDD000 0000F9 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.005923] ACPI: HPET 0x0000000063FDB000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005925] ACPI: APIC 0x0000000063FDA000 000358 (v05 INTEL MTL 00000002 01000013) <6>[ 0.005927] ACPI: MCFG 0x0000000063FD9000 00003C (v01 INTEL MTL 00000002 01000013) <6>[ 0.005929] ACPI: SSDT 0x0000000063F45000 00FCEF (v02 INTEL MtlP_Rvp 00001000 INTL 20210930) <6>[ 0.005931] ACPI: SSDT 0x0000000063F43000 00147F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.005933] ACPI: SSDT 0x0000000063F3E000 00389C (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.005935] ACPI: SSDT 0x0000000063F38000 00535A (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.005938] ACPI: SSDT 0x0000000063FFD000 00060E (v02 INTEL Tpm2Tabl 00001000 INTL 20210930) <6>[ 0.005939] ACPI: TPM2 0x0000000063F37000 00004C (v04 INTEL MTL 00000002 01000013) <6>[ 0.005942] ACPI: LPIT 0x0000000063F36000 0000CC (v01 INTEL MTL 00000002 01000013) <6>[ 0.005944] ACPI: WSMT 0x0000000063F35000 000028 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005946] ACPI: SSDT 0x0000000063F34000 000CA6 (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.005948] ACPI: SSDT 0x0000000063F2E000 00587D (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.005949] ACPI: DBGP 0x0000000063F2D000 000034 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005951] ACPI: DBG2 0x0000000063F2C000 000054 (v00 INTEL MTL 00000002 01000013) <6>[ 0.005953] ACPI: NHLT 0x0000000063F2B000 00098B (v00 INTEL MTL 00000002 01000013) <6>[ 0.005955] ACPI: SSDT 0x0000000063F29000 001191 (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.005957] ACPI: SSDT 0x0000000063F23000 005CAE (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.005959] ACPI: ECDT 0x0000000063F22000 000069 (v01 MTL 00000002 01000013) <6>[ 0.005961] ACPI: DMAR 0x0000000063F21000 0000A8 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005963] ACPI: FPDT 0x0000000063F20000 000044 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005965] ACPI: SSDT 0x0000000063F1E000 001015 (v02 INTEL xh_mtlp3 00000000 INTL 20210930) <6>[ 0.005967] ACPI: SSDT 0x0000000063F1B000 00281A (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.005969] ACPI: SSDT 0x0000000063F18000 0028D3 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.005971] ACPI: SSDT 0x0000000063F16000 0011A0 (v02 INTEL St00Ssdt 00001000 INTL 20210930) <6>[ 0.005973] ACPI: ASF! 0x0000000063F42000 000074 (v32 INTEL MTL 00000002 01000013) <6>[ 0.005974] ACPI: PHAT 0x0000000063F14000 000810 (v01 INTEL MTL 00000005 MSFT 0100000D) <6>[ 0.005976] ACPI: BGRT 0x0000000063F13000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005977] ACPI: Reserving FACP table memory at [mem 0x63fdc000-0x63fdc113] <6>[ 0.005979] ACPI: Reserving DSDT table memory at [mem 0x63f55000-0x63fd8f89] <6>[ 0.005979] ACPI: Reserving FACS table memory at [mem 0x63df7000-0x63df703f] <6>[ 0.005980] ACPI: Reserving SSDT table memory at [mem 0x63ffc000-0x63ffc38b] <6>[ 0.005981] ACPI: Reserving SSDT table memory at [mem 0x63ffb000-0x63ffb70c] <6>[ 0.005981] ACPI: Reserving SSDT table memory at [mem 0x63ffa000-0x63ffa5e3] <6>[ 0.005982] ACPI: Reserving SSDT table memory at [mem 0x63ff9000-0x63ff91aa] <6>[ 0.005982] ACPI: Reserving SSDT table memory at [mem 0x63ff8000-0x63ff8393] <6>[ 0.005983] ACPI: Reserving SSDT table memory at [mem 0x63ff6000-0x63ff7bae] <6>[ 0.005983] ACPI: Reserving SSDT table memory at [mem 0x63ff4000-0x63ff561f] <6>[ 0.005984] ACPI: Reserving SSDT table memory at [mem 0x63ff2000-0x63ff3348] <6>[ 0.005984] ACPI: Reserving SSDT table memory at [mem 0x63ff1000-0x63ff1fba] <6>[ 0.005985] ACPI: Reserving SSDT table memory at [mem 0x63fed000-0x63ff0bc7] <6>[ 0.005986] ACPI: Reserving DTPR table memory at [mem 0x63fec000-0x63fec097] <6>[ 0.005986] ACPI: Reserving SSDT table memory at [mem 0x63feb000-0x63febd02] <6>[ 0.005987] ACPI: Reserving SSDT table memory at [mem 0x63fe8000-0x63fea493] <6>[ 0.005987] ACPI: Reserving SSDT table memory at [mem 0x63fde000-0x63fe7ab6] <6>[ 0.005988] ACPI: Reserving SSDT table memory at [mem 0x63fdd000-0x63fdd0f8] <6>[ 0.005988] ACPI: Reserving HPET table memory at [mem 0x63fdb000-0x63fdb037] <6>[ 0.005989] ACPI: Reserving APIC table memory at [mem 0x63fda000-0x63fda357] <6>[ 0.005990] ACPI: Reserving MCFG table memory at [mem 0x63fd9000-0x63fd903b] <6>[ 0.005990] ACPI: Reserving SSDT table memory at [mem 0x63f45000-0x63f54cee] <6>[ 0.005991] ACPI: Reserving SSDT table memory at [mem 0x63f43000-0x63f4447e] <6>[ 0.005992] ACPI: Reserving SSDT table memory at [mem 0x63f3e000-0x63f4189b] <6>[ 0.005992] ACPI: Reserving SSDT table memory at [mem 0x63f38000-0x63f3d359] <6>[ 0.005992] ACPI: Reserving SSDT table memory at [mem 0x63ffd000-0x63ffd60d] <6>[ 0.005993] ACPI: Reserving TPM2 table memory at [mem 0x63f37000-0x63f3704b] <6>[ 0.005994] ACPI: Reserving LPIT table memory at [mem 0x63f36000-0x63f360cb] <6>[ 0.005994] ACPI: Reserving WSMT table memory at [mem 0x63f35000-0x63f35027] <6>[ 0.005995] ACPI: Reserving SSDT table memory at [mem 0x63f34000-0x63f34ca5] <6>[ 0.005995] ACPI: Reserving SSDT table memory at [mem 0x63f2e000-0x63f3387c] <6>[ 0.005996] ACPI: Reserving DBGP table memory at [mem 0x63f2d000-0x63f2d033] <6>[ 0.005996] ACPI: Reserving DBG2 table memory at [mem 0x63f2c000-0x63f2c053] <6>[ 0.005997] ACPI: Reserving NHLT table memory at [mem 0x63f2b000-0x63f2b98a] <6>[ 0.005997] ACPI: Reserving SSDT table memory at [mem 0x63f29000-0x63f2a190] <6>[ 0.005998] ACPI: Reserving SSDT table memory at [mem 0x63f23000-0x63f28cad] <6>[ 0.005998] ACPI: Reserving ECDT table memory at [mem 0x63f22000-0x63f22068] <6>[ 0.005999] ACPI: Reserving DMAR table memory at [mem 0x63f21000-0x63f210a7] <6>[ 0.005999] ACPI: Reserving FPDT table memory at [mem 0x63f20000-0x63f20043] <6>[ 0.006000] ACPI: Reserving SSDT table memory at [mem 0x63f1e000-0x63f1f014] <6>[ 0.006000] ACPI: Reserving SSDT table memory at [mem 0x63f1b000-0x63f1d819] <6>[ 0.006001] ACPI: Reserving SSDT table memory at [mem 0x63f18000-0x63f1a8d2] <6>[ 0.006001] ACPI: Reserving SSDT table memory at [mem 0x63f16000-0x63f1719f] <6>[ 0.006002] ACPI: Reserving ASF! table memory at [mem 0x63f42000-0x63f42073] <6>[ 0.006003] ACPI: Reserving PHAT table memory at [mem 0x63f14000-0x63f1480f] <6>[ 0.006004] ACPI: Reserving BGRT table memory at [mem 0x63f13000-0x63f13037] <6>[ 0.006099] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.006319] No NUMA configuration found <6>[ 0.006319] Faking a node at [mem 0x0000000000000000-0x000000087fffffff] <6>[ 0.006326] NODE_DATA(0) allocated [mem 0x87fb52e40-0x87fb7dfff] <6>[ 0.006500] Zone ranges: <6>[ 0.006501] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.006502] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.006503] Normal [mem 0x0000000100000000-0x000000087fffffff] <6>[ 0.006504] Device empty <6>[ 0.006505] Movable zone start for each node <6>[ 0.006506] Early memory node ranges <6>[ 0.006506] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.006507] node 0: [mem 0x0000000000100000-0x0000000060a3efff] <6>[ 0.006507] node 0: [mem 0x0000000063fff000-0x0000000063ffffff] <6>[ 0.006508] node 0: [mem 0x0000000100000000-0x000000087fffffff] <6>[ 0.006509] Initmem setup node 0 [mem 0x0000000000001000-0x000000087fffffff] <6>[ 0.006516] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.006538] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.008692] On node 0, zone DMA32: 13760 pages in unavailable ranges <6>[ 0.050581] On node 0, zone Normal: 16384 pages in unavailable ranges <6>[ 0.051053] ACPI: PM-Timer IO Port: 0x1808 <4>[ 0.051058] CPU topo: Boot CPU APIC ID not the first enumerated APIC ID: 20 != 10 <4>[ 0.051059] CPU topo: [Firmware Bug]: APIC enumeration order not specification compliant <6>[ 0.051062] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.051107] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.051109] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.051111] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.051114] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.051115] ACPI: HPET id: 0x8086a201 base: 0xfed00000 <7>[ 0.051129] e820: update [mem 0x5bda0000-0x5bdbafff] usable ==> reserved <6>[ 0.051137] TSC deadline timer available <6>[ 0.051140] CPU topo: Max. logical packages: 1 <6>[ 0.051141] CPU topo: Max. logical dies: 1 <6>[ 0.051141] CPU topo: Max. dies per package: 1 <6>[ 0.051144] CPU topo: Max. threads per core: 2 <6>[ 0.051145] CPU topo: Num. cores per package: 16 <6>[ 0.051145] CPU topo: Num. threads per package: 22 <6>[ 0.051145] CPU topo: Allowing 22 present CPUs plus 0 hotplug CPUs <6>[ 0.051166] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.051168] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.051169] PM: hibernation: Registered nosave memory: [mem 0x5ae00000-0x5ae00fff] <6>[ 0.051171] PM: hibernation: Registered nosave memory: [mem 0x5bda0000-0x5bdbafff] <6>[ 0.051173] PM: hibernation: Registered nosave memory: [mem 0x60a3f000-0x63ffefff] <6>[ 0.051174] PM: hibernation: Registered nosave memory: [mem 0x64000000-0xffffffff] <6>[ 0.051177] [mem 0x78800000-0xfed1ffff] available for PCI devices <6>[ 0.051178] Booting paravirtualized kernel on bare hardware <6>[ 0.051181] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.051193] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:22 nr_cpu_ids:22 nr_node_ids:1 <6>[ 0.052657] percpu: Embedded 87 pages/cpu s233472 r8192 d114688 u524288 <7>[ 0.052663] pcpu-alloc: s233472 r8192 d114688 u524288 alloc=1*2097152 <7>[ 0.052665] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 <7>[ 0.052669] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 <7>[ 0.052671] pcpu-alloc: [0] 16 17 18 19 [0] 20 21 -- -- <5>[ 0.052696] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <7>[ 0.052820] blacklisting initcall simpledrm_platform_driver_init <5>[ 0.052842] random: crng init done <6>[ 0.055653] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.057038] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.057174] software IO TLB: area num 32. <6>[ 0.069205] Fallback order for Node 0: 0 <6>[ 0.069209] Built 1 zonelists, mobility grouping on. Total pages: 8260062 <6>[ 0.069209] Policy zone: Normal <6>[ 0.069224] mem auto-init: stack:off, heap alloc:on, heap free:off <6>[ 0.069225] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.069228] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) <6>[ 0.070774] stackdepot: allocating space for 8192 stack pools via memblock <4>[ 0.113261] ********************************************************** <4>[ 0.113262] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.113262] ** ** <4>[ 0.113263] ** This system shows unhashed kernel memory addresses ** <4>[ 0.113263] ** via the console, logs, and other interfaces. This ** <4>[ 0.113263] ** might reduce the security of your system. ** <4>[ 0.113264] ** ** <4>[ 0.113264] ** If you see this message and you are not debugging ** <4>[ 0.113264] ** the kernel, report this immediately to your system ** <4>[ 0.113264] ** administrator! ** <4>[ 0.113264] ** ** <4>[ 0.113265] ** Use hash_pointers=always to force this mode off ** <4>[ 0.113265] ** ** <4>[ 0.113265] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.113265] ********************************************************** <6>[ 0.114832] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=22, Nodes=1 <6>[ 0.125639] ftrace: allocating 61101 entries in 240 pages <6>[ 0.125640] ftrace: allocated 240 pages with 4 groups <6>[ 0.127416] Dynamic Preempt: voluntary <6>[ 0.128549] Running RCU self tests <6>[ 0.128550] Running RCU synchronous self tests <6>[ 0.128551] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.128551] rcu: RCU lockdep checking is enabled. <6>[ 0.128552] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=22. <6>[ 0.128553] Trampoline variant of Tasks RCU enabled. <6>[ 0.128553] Rude variant of Tasks RCU enabled. <6>[ 0.128553] Tracing variant of Tasks RCU enabled. <6>[ 0.128553] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.128554] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=22 <6>[ 0.128690] Running RCU synchronous self tests <6>[ 0.128699] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22. <6>[ 0.128703] RCU Tasks Rude: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22. <6>[ 0.128707] RCU Tasks Trace: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22. <6>[ 0.141293] NR_IRQS: 524544, nr_irqs: 2232, preallocated irqs: 16 <6>[ 0.141868] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.142490] Console: colour dummy device 80x25 <6>[ 0.142502] printk: legacy console [tty0] enabled <6>[ 0.144003] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <6>[ 0.144013] ... MAX_LOCKDEP_SUBCLASSES: 8 <6>[ 0.144017] ... MAX_LOCK_DEPTH: 48 <6>[ 0.144021] ... MAX_LOCKDEP_KEYS: 8192 <6>[ 0.144026] ... CLASSHASH_SIZE: 4096 <6>[ 0.144030] ... MAX_LOCKDEP_ENTRIES: 524288 <6>[ 0.144034] ... MAX_LOCKDEP_CHAINS: 524288 <6>[ 0.144039] ... CHAINHASH_SIZE: 262144 <6>[ 0.144044] memory used by lock dependency info: 54145 kB <6>[ 0.144050] memory used for stack traces: 4224 kB <6>[ 0.144054] per task-struct memory footprint: 1920 bytes <6>[ 0.144127] ACPI: Core revision 20250807 <6>[ 0.145191] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 0.145249] APIC: Switch to symmetric I/O mode setup <6>[ 0.145257] DMAR: Host address width 42 <6>[ 0.145262] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 0.145300] DMAR: dmar0: reg_base_addr fc800000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0ef5e <6>[ 0.145310] DMAR: DRHD base: 0x000000fc801000 flags: 0x1 <6>[ 0.145331] DMAR: dmar1: reg_base_addr fc801000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0efde <6>[ 0.145340] DMAR: SATC flags: 0x1 <6>[ 0.145353] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc801000 IOMMU 1 <6>[ 0.145360] DMAR-IR: HPET id 0 under DRHD base 0xfc801000 <6>[ 0.145365] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 0.147049] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 0.151481] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 0.151503] Calibrating delay loop (skipped), value calculated using timer frequency.. 6758.40 BogoMIPS (lpj=3379200) <6>[ 0.151573] CPU0: Thermal monitoring enabled (TM1) <6>[ 0.151581] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 0.151786] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 0.151793] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 0.151803] process: using mwait in idle threads <6>[ 0.151811] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto <6>[ 0.151827] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 0.151835] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 0.151842] VMSCAPE: Mitigation: IBPB before exit to userspace <6>[ 0.151848] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 0.151858] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 0.151877] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 0.151886] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 0.151894] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 0.151901] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 0.151910] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 0.151918] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' <6>[ 0.151926] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 0.151933] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 0.151940] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 0.151946] x86/fpu: xstate_offset[12]: 856, xstate_sizes[12]: 24 <6>[ 0.151953] x86/fpu: Enabled xstate features 0x1a07, context size is 880 bytes, using 'compacted' format. <6>[ 0.152497] Freeing SMP alternatives memory: 56K <6>[ 0.152497] pid_max: default: 32768 minimum: 301 <6>[ 0.152497] landlock: Up and running. <6>[ 0.152497] Yama: becoming mindful. <6>[ 0.152497] AppArmor: AppArmor initialized <6>[ 0.152497] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.152497] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.152497] Running RCU synchronous self tests <6>[ 0.152497] Running RCU synchronous self tests <6>[ 0.152497] smpboot: CPU0: Intel(R) Core(TM) Ultra 7 1002H (family: 0x6, model: 0xaa, stepping: 0x4) <6>[ 0.152497] Performance Events: XSAVE Architectural LBR, PEBS fmt5+-baseline, AnyThread deprecated, Meteorlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 0.152708] core: cpu_core PMU driver: <6>[ 0.152716] ... version: 5 <6>[ 0.152721] ... bit width: 48 <6>[ 0.152725] ... generic counters: 8 <6>[ 0.152729] ... generic bitmap: 00000000000000ff <6>[ 0.152733] ... fixed-purpose counters: 4 <6>[ 0.152737] ... fixed-purpose bitmap: 000000000000000f <6>[ 0.152742] ... value mask: 0000ffffffffffff <6>[ 0.152747] ... max period: 00007fffffffffff <6>[ 0.152751] ... global_ctrl mask: 0001000f000000ff <6>[ 0.152942] signal: max sigframe size: 3632 <6>[ 0.152974] Estimated ratio of average max frequency by base frequency (times 1024): 1505 <6>[ 0.153128] rcu: Hierarchical SRCU implementation. <6>[ 0.153133] rcu: Max phase no-delay instances is 400. <6>[ 0.153309] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level <6>[ 0.156001] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 0.156785] smp: Bringing up secondary CPUs ... <6>[ 0.157225] smpboot: x86: Booting SMP configuration: <6>[ 0.157233] .... node #0, CPUs: #1 #3 #6 #8 #10 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 <6>[ 0.010498] core: cpu_atom PMU driver: <6>[ 0.010498] ... version: 5 <6>[ 0.010498] ... bit width: 48 <6>[ 0.010498] ... generic counters: 8 <6>[ 0.010498] ... generic bitmap: 00000000000000ff <6>[ 0.010498] ... fixed-purpose counters: 3 <6>[ 0.010498] ... fixed-purpose bitmap: 0000000000000007 <6>[ 0.010498] ... value mask: 0000ffffffffffff <6>[ 0.010498] ... max period: 00007fffffffffff <6>[ 0.010498] ... global_ctrl mask: 00000007000000ff <5>[ 0.171599] #2 #4 #5 #7 #9 #11 <6>[ 0.177577] smp: Brought up 1 node, 22 CPUs <6>[ 0.177577] smpboot: Total of 22 processors activated (148684.80 BogoMIPS) <6>[ 0.180683] Memory: 32229160K/33040248K available (25578K kernel code, 5617K rwdata, 9656K rodata, 5720K init, 68168K bss, 780060K reserved, 0K cma-reserved) <6>[ 0.184728] devtmpfs: initialized <6>[ 0.184876] x86/mm: Memory block size: 128MB <6>[ 0.210075] ACPI: PM: Registering ACPI NVS region [mem 0x63db7000-0x63edbfff] (1200128 bytes) <6>[ 0.210969] Running RCU synchronous self tests <6>[ 0.210990] Running RCU synchronous self tests <6>[ 0.211010] Running RCU Tasks wait API self tests <6>[ 0.211010] Running RCU Tasks Rude wait API self tests <6>[ 0.211010] Running RCU Tasks Trace wait API self tests <6>[ 0.224524] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.224732] posixtimers hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 0.225050] futex hash table entries: 8192 (1048576 bytes on 1 NUMA nodes, total 1024 KiB, linear). <6>[ 0.226383] PM: RTC time: 06:18:53, date: 2026-01-29 <6>[ 0.227274] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.228519] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.228933] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.229350] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.229410] audit: initializing netlink subsys (disabled) <5>[ 0.229532] audit: type=2000 audit(1769667532.078:1): state=initialized audit_enabled=0 res=1 <6>[ 0.230307] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.230309] thermal_sys: Registered thermal governor 'bang_bang' <6>[ 0.230315] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.230320] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.230325] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.230367] cpuidle: using governor ladder <6>[ 0.230367] cpuidle: using governor menu <6>[ 0.230609] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 0.231164] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 0.231194] PCI: Using configuration type 1 for base access <6>[ 0.231605] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.232536] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.232543] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 0.232549] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.232554] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.235970] raid6: skipped pq benchmark and selected avx2x4 <6>[ 0.235980] raid6: using avx2x2 recovery algorithm <6>[ 0.236604] fbcon: Taking over console <6>[ 0.236802] ACPI: Added _OSI(Module Device) <6>[ 0.236807] ACPI: Added _OSI(Processor Device) <6>[ 0.236811] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 0.243508] Callback from call_rcu_tasks_trace() invoked. <6>[ 0.844490] ACPI: 28 ACPI AML tables successfully acquired and loaded <6>[ 0.863021] ACPI: EC: EC started <6>[ 0.863036] ACPI: EC: interrupt blocked <6>[ 0.868490] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 0.868499] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 0.952608] Callback from call_rcu_tasks() invoked. <6>[ 1.171270] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.171287] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.264253] ACPI: Interpreter enabled <6>[ 1.264461] ACPI: PM: (supports S0 S4 S5) <6>[ 1.264472] ACPI: Using IOAPIC for interrupt routing <6>[ 1.275307] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 1.275324] PCI: Ignoring E820 reservations for host bridge windows <6>[ 1.326149] ACPI: Enabled 10 GPEs in block 00 to 7F <6>[ 1.326200] ACPI: Enabled 8 GPEs in block 80 to DF <6>[ 1.428574] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 1.772709] ACPI: \_SB_.PC00.RP01.PXP_: New power resource <6>[ 1.806325] ACPI: \_SB_.PC00.RP06.PXP_: New power resource <6>[ 1.819697] ACPI: \_SB_.PC00.RP07.PXP_: New power resource <6>[ 1.844440] ACPI: \_SB_.PC00.RP09.PXP_: New power resource <6>[ 1.855511] ACPI: \_SB_.PC00.RP10.PXP_: New power resource <6>[ 1.868023] ACPI: \_SB_.PC00.RP11.PXP_: New power resource <6>[ 1.880427] ACPI: \_SB_.PC00.RP12.PXP_: New power resource <6>[ 2.083024] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 2.083370] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 2.083687] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 2.196566] ACPI: \_TZ_.FN00: New power resource <6>[ 2.198143] ACPI: \_TZ_.FN01: New power resource <6>[ 2.199207] ACPI: \_TZ_.FN02: New power resource <6>[ 2.200499] ACPI: \_TZ_.FN03: New power resource <6>[ 2.201328] ACPI: \_TZ_.FN04: New power resource <6>[ 2.207503] ACPI: \PIN_: New power resource <6>[ 2.213006] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 2.213037] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] <6>[ 2.217197] acpi PNP0A08:00: _OSC: platform does not support [AER] <6>[ 2.225724] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME PCIeCapability LTR DPC] <6>[ 2.248545] PCI host bridge to bus 0000:00 <6>[ 2.248609] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 2.248625] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 2.248640] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 2.248656] pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff window] <6>[ 2.248672] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x3ffbfffffff window] <6>[ 2.248690] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 2.266194] pci 0000:00:00.0: [8086:7d01] type 00 class 0x060000 conventional PCI endpoint <6>[ 2.267292] pci 0000:00:02.0: [8086:7d55] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint <6>[ 2.267340] pci 0000:00:02.0: BAR 0 [mem 0x5018000000-0x5018ffffff 64bit pref] <6>[ 2.267355] pci 0000:00:02.0: BAR 2 [mem 0x4000000000-0x400fffffff 64bit pref] <6>[ 2.267409] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics <6>[ 2.267424] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 2.267489] pci 0000:00:02.0: PME# supported from D0 D3hot <6>[ 2.268018] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x00ffffff 64bit pref] <6>[ 2.268031] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x06ffffff 64bit pref]: contains BAR 0 for 7 VFs <6>[ 2.270528] pci 0000:00:04.0: [8086:7d03] type 00 class 0x118000 conventional PCI endpoint <6>[ 2.270582] pci 0000:00:04.0: BAR 0 [mem 0x501a280000-0x501a29ffff 64bit] <6>[ 2.273305] pci 0000:00:05.0: [8086:7d19] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint <6>[ 2.273345] pci 0000:00:05.0: BAR 0 [mem 0x5019000000-0x5019ffffff 64bit] <6>[ 2.273364] pci 0000:00:05.0: enabling Extended Tags <6>[ 2.275116] pci 0000:00:06.0: [8086:7ecb] type 01 class 0x060400 PCIe Root Port <6>[ 2.275157] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 2.275174] pci 0000:00:06.0: bridge window [mem 0x8c000000-0x8c0fffff] <6>[ 2.275322] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold <6>[ 2.275424] pci 0000:00:06.0: PTM enabled (root), 4ns granularity <6>[ 2.285492] pci 0000:00:07.0: [8086:7ec6] type 01 class 0x060400 PCIe Root Port <6>[ 2.285531] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 2.285547] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff] <6>[ 2.285568] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 2.285688] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 2.285771] pci 0000:00:07.0: PTM enabled (root), 4ns granularity <6>[ 2.294808] pci 0000:00:07.3: [8086:7ec7] type 01 class 0x060400 PCIe Root Port <6>[ 2.294850] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 2.294865] pci 0000:00:07.3: bridge window [mem 0x80000000-0x85ffffff] <6>[ 2.294886] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 2.295004] pci 0000:00:07.3: PME# supported from D0 D3hot D3cold <6>[ 2.295087] pci 0000:00:07.3: PTM enabled (root), 4ns granularity <6>[ 2.304428] pci 0000:00:08.0: [8086:7e4c] type 00 class 0x088000 conventional PCI endpoint <6>[ 2.304489] pci 0000:00:08.0: BAR 0 [mem 0x501a2e3000-0x501a2e3fff 64bit] <6>[ 2.305297] pci 0000:00:0a.0: [8086:7d0d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint <6>[ 2.305335] pci 0000:00:0a.0: BAR 0 [mem 0x501a240000-0x501a27ffff 64bit] <6>[ 2.305354] pci 0000:00:0a.0: enabling Extended Tags <6>[ 2.305753] pci 0000:00:0b.0: [8086:7d1d] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint <6>[ 2.305794] pci 0000:00:0b.0: BAR 0 [mem 0x5010000000-0x5017ffffff 64bit] <6>[ 2.305809] pci 0000:00:0b.0: BAR 4 [mem 0x501a2e2000-0x501a2e2fff 64bit] <6>[ 2.306666] pci 0000:00:0d.0: [8086:7ec0] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.306767] pci 0000:00:0d.0: BAR 0 [mem 0x501a2c0000-0x501a2cffff 64bit] <6>[ 2.306857] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 2.310398] pci 0000:00:0d.3: [8086:7ec3] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.310489] pci 0000:00:0d.3: BAR 0 [mem 0x501a200000-0x501a23ffff 64bit] <6>[ 2.310502] pci 0000:00:0d.3: BAR 2 [mem 0x501a2e1000-0x501a2e1fff 64bit] <6>[ 2.310569] pci 0000:00:0d.3: supports D1 D2 <6>[ 2.310578] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.313626] pci 0000:00:12.0: [8086:7e45] type 00 class 0x070000 conventional PCI endpoint <6>[ 2.313677] pci 0000:00:12.0: BAR 0 [mem 0x501a2b0000-0x501a2bffff 64bit] <6>[ 2.313748] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 2.318657] pci 0000:00:14.0: [8086:7e7d] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.318709] pci 0000:00:14.0: BAR 0 [mem 0x501a2a0000-0x501a2affff 64bit] <6>[ 2.318781] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 2.322825] pci 0000:00:14.2: [8086:7e7f] type 00 class 0x050000 conventional PCI endpoint <6>[ 2.322884] pci 0000:00:14.2: BAR 0 [mem 0x501a2d4000-0x501a2d7fff 64bit] <6>[ 2.322899] pci 0000:00:14.2: BAR 2 [mem 0x501a2e0000-0x501a2e0fff 64bit] <6>[ 2.323382] pci 0000:00:15.0: [8086:7e78] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.323477] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.335881] pci 0000:00:15.1: [8086:7e79] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.335950] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.348069] pci 0000:00:15.2: [8086:7e7a] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.348138] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.360937] pci 0000:00:15.3: [8086:7e7b] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.361002] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.374020] pci 0000:00:16.0: [8086:7e70] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.374084] pci 0000:00:16.0: BAR 0 [mem 0x501a2db000-0x501a2dbfff 64bit] <6>[ 2.374164] pci 0000:00:16.0: PME# supported from D3hot <6>[ 2.379253] pci 0000:00:16.3: [8086:7e73] type 00 class 0x070002 conventional PCI endpoint <6>[ 2.379306] pci 0000:00:16.3: BAR 0 [io 0x3020-0x3027] <6>[ 2.379317] pci 0000:00:16.3: BAR 1 [mem 0x8c121000-0x8c121fff] <6>[ 2.379720] pci 0000:00:19.0: [8086:7e50] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.379786] pci 0000:00:19.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.391420] pci 0000:00:19.1: [8086:7e51] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.391484] pci 0000:00:19.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.404896] pci 0000:00:1f.0: [8086:7e02] type 00 class 0x060100 conventional PCI endpoint <6>[ 2.407457] pci 0000:00:1f.3: [8086:7e28] type 00 class 0x040100 conventional PCI endpoint <6>[ 2.407579] pci 0000:00:1f.3: BAR 0 [mem 0x501a2d0000-0x501a2d3fff 64bit] <6>[ 2.407600] pci 0000:00:1f.3: BAR 4 [mem 0x501a000000-0x501a1fffff 64bit] <6>[ 2.407733] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 2.408597] pci 0000:00:1f.4: [8086:7e22] type 00 class 0x0c0500 conventional PCI endpoint <6>[ 2.408659] pci 0000:00:1f.4: BAR 0 [mem 0x501a2d8000-0x501a2d80ff 64bit] <6>[ 2.408676] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] <6>[ 2.411114] pci 0000:00:1f.5: [8086:7e23] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.411229] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] <6>[ 2.411639] pci 0000:00:1f.6: [8086:550a] type 00 class 0x020000 conventional PCI endpoint <6>[ 2.411728] pci 0000:00:1f.6: BAR 0 [mem 0x8c100000-0x8c11ffff] <6>[ 2.411827] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold <6>[ 2.415104] pci 0000:01:00.0: [15b7:501e] type 00 class 0x010802 PCIe Endpoint <6>[ 2.415271] pci 0000:01:00.0: BAR 0 [mem 0x8c000000-0x8c003fff 64bit] <6>[ 2.417245] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 2.417630] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 2.417945] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 2.842227] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1) <6>[ 2.842245] Low-power S0 idle used by default for system suspend <6>[ 2.949908] ACPI: EC: interrupt unblocked <6>[ 2.949921] ACPI: EC: event unblocked <6>[ 2.949950] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 2.949956] ACPI: EC: GPE=0x6e <6>[ 2.949963] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 2.949972] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 2.951899] iommu: Default domain type: Translated <6>[ 2.951899] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 2.954595] SCSI subsystem initialized <7>[ 2.954656] libata version 3.00 loaded. <6>[ 2.954696] ACPI: bus type USB registered <6>[ 2.954814] usbcore: registered new interface driver usbfs <6>[ 2.954869] usbcore: registered new interface driver hub <6>[ 2.954936] usbcore: registered new device driver usb <6>[ 2.955099] pps_core: LinuxPPS API ver. 1 registered <6>[ 2.955103] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 2.955132] PTP clock support registered <6>[ 2.955613] EDAC MC: Ver: 3.0.0 <6>[ 2.956616] efivars: Registered efivars operations <6>[ 2.958567] NetLabel: Initializing <6>[ 2.958572] NetLabel: domain hash size = 128 <6>[ 2.958576] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO <6>[ 2.958652] NetLabel: unlabeled traffic allowed by default <6>[ 2.958669] mctp: management component transport protocol core <6>[ 2.958675] NET: Registered PF_MCTP protocol family <6>[ 2.958732] PCI: Using ACPI for IRQ routing <7>[ 2.970391] PCI: pci_cache_line_size set to 64 bytes <6>[ 2.970547] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window <7>[ 2.970730] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 2.970740] e820: reserve RAM buffer [mem 0x5ae00000-0x5bffffff] <7>[ 2.970743] e820: reserve RAM buffer [mem 0x5bda0000-0x5bffffff] <7>[ 2.970745] e820: reserve RAM buffer [mem 0x60a3f000-0x63ffffff] <6>[ 2.971653] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 2.971653] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 2.971653] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 2.971653] vgaarb: loaded <6>[ 2.980504] clocksource: Switched to clocksource tsc-early <5>[ 2.989017] VFS: Disk quotas dquot_6.6.0 <6>[ 2.989049] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 2.990307] AppArmor: AppArmor Filesystem Enabled <6>[ 2.990509] pnp: PnP ACPI init <6>[ 2.991548] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 2.991561] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 2.992244] system 00:01: [io 0x1854-0x1857] has been reserved <6>[ 2.993666] system 00:03: [io 0x06a4] has been reserved <6>[ 2.993675] system 00:03: [io 0x06a0] has been reserved <4>[ 3.015977] pnp 00:04: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] <4>[ 3.015989] pnp 00:04: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] <6>[ 3.016131] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 3.016141] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 3.016153] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved <6>[ 3.016163] system 00:04: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 3.016173] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 3.016181] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 3.021266] system 00:05: [io 0x2000-0x20fe] has been reserved <4>[ 3.022365] pnp 00:07: disabling [mem 0x00000000-0x0009cfff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] <6>[ 3.026155] pnp: PnP ACPI: found 8 devices <6>[ 3.039708] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 3.040636] NET: Registered PF_INET protocol family <6>[ 3.040888] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 3.043198] tcp_listen_portaddr_hash hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 3.043347] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 3.043587] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 3.044672] TCP bind hash table entries: 65536 (order: 12, 9437184 bytes, vmalloc hugepage) <6>[ 3.045777] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 3.046382] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 3.047138] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 3.048077] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 3.048142] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2 <6>[ 3.048177] pci 0000:00:02.0: VF BAR 0 [mem 0x501b000000-0x5021ffffff 64bit pref]: assigned <6>[ 3.048191] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned <6>[ 3.048197] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff]: assigned <6>[ 3.048204] pci 0000:00:15.0: BAR 0 [mem 0x501a2d9000-0x501a2d9fff 64bit]: assigned <6>[ 3.048219] pci 0000:00:15.1: BAR 0 [mem 0x501a2da000-0x501a2dafff 64bit]: assigned <6>[ 3.048235] pci 0000:00:15.2: BAR 0 [mem 0x501a2dc000-0x501a2dcfff 64bit]: assigned <6>[ 3.048250] pci 0000:00:15.3: BAR 0 [mem 0x501a2dd000-0x501a2ddfff 64bit]: assigned <6>[ 3.048269] pci 0000:00:19.0: BAR 0 [mem 0x501a2de000-0x501a2defff 64bit]: assigned <6>[ 3.048285] pci 0000:00:19.1: BAR 0 [mem 0x501a2df000-0x501a2dffff 64bit]: assigned <6>[ 3.048301] pci 0000:00:1f.5: BAR 0 [mem 0x8c120000-0x8c120fff]: assigned <6>[ 3.048324] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 3.048334] pci 0000:00:06.0: bridge window [mem 0x8c000000-0x8c0fffff] <6>[ 3.048345] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 3.048354] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 3.048361] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff] <6>[ 3.048369] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 3.048379] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 3.048385] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff] <6>[ 3.048393] pci 0000:00:07.3: bridge window [mem 0x80000000-0x85ffffff] <6>[ 3.048401] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 3.048411] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 3.048416] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 3.048421] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 3.048427] pci_bus 0000:00: resource 7 [mem 0x80000000-0xbfffffff window] <6>[ 3.048434] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x3ffbfffffff window] <6>[ 3.048440] pci_bus 0000:01: resource 1 [mem 0x8c000000-0x8c0fffff] <6>[ 3.048446] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] <6>[ 3.048451] pci_bus 0000:02: resource 1 [mem 0x86000000-0x8bffffff] <6>[ 3.048456] pci_bus 0000:02: resource 2 [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 3.048463] pci_bus 0000:2c: resource 0 [io 0x5000-0x5fff] <6>[ 3.048468] pci_bus 0000:2c: resource 1 [mem 0x80000000-0x85ffffff] <6>[ 3.048474] pci_bus 0000:2c: resource 2 [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 3.049906] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 3.051980] PCI: CLS 0 bytes, default 64 <6>[ 3.052090] DMAR: No RMRR found <6>[ 3.052100] DMAR: No ATSR found <6>[ 3.052104] DMAR: dmar0: Using Queued invalidation <6>[ 3.052110] DMAR: dmar1: Using Queued invalidation <6>[ 3.053031] pci 0000:00:02.0: Adding to iommu group 0 <6>[ 3.054231] pci 0000:00:00.0: Adding to iommu group 1 <6>[ 3.054301] pci 0000:00:04.0: Adding to iommu group 2 <6>[ 3.054358] pci 0000:00:05.0: Adding to iommu group 3 <6>[ 3.054437] pci 0000:00:06.0: Adding to iommu group 4 <6>[ 3.054516] pci 0000:00:07.0: Adding to iommu group 5 <6>[ 3.054580] pci 0000:00:07.3: Adding to iommu group 6 <6>[ 3.054638] pci 0000:00:08.0: Adding to iommu group 7 <6>[ 3.054693] pci 0000:00:0a.0: Adding to iommu group 8 <6>[ 3.054751] pci 0000:00:0b.0: Adding to iommu group 9 <6>[ 3.054825] pci 0000:00:0d.0: Adding to iommu group 10 <6>[ 3.054866] pci 0000:00:0d.3: Adding to iommu group 10 <6>[ 3.054930] pci 0000:00:12.0: Adding to iommu group 11 <6>[ 3.055000] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 3.055047] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 3.055130] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 3.055171] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 3.055214] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 3.055256] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 3.055325] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 3.055369] pci 0000:00:16.3: Adding to iommu group 14 <6>[ 3.055440] pci 0000:00:19.0: Adding to iommu group 15 <6>[ 3.055483] pci 0000:00:19.1: Adding to iommu group 15 <6>[ 3.055646] pci 0000:00:1f.0: Adding to iommu group 16 <6>[ 3.055689] pci 0000:00:1f.3: Adding to iommu group 16 <6>[ 3.055734] pci 0000:00:1f.4: Adding to iommu group 16 <6>[ 3.055780] pci 0000:00:1f.5: Adding to iommu group 16 <6>[ 3.055823] pci 0000:00:1f.6: Adding to iommu group 16 <6>[ 3.055903] pci 0000:01:00.0: Adding to iommu group 17 <6>[ 3.070468] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 3.070478] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 3.070485] software IO TLB: mapped [mem 0x0000000056e00000-0x000000005ae00000] (64MB) <6>[ 3.074102] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 3.074470] clocksource: Switched to clocksource tsc <6>[ 3.074594] platform rtc_cmos: registered platform RTC device (no PNP device found) <5>[ 3.081894] Initialise system trusted keyrings <5>[ 3.081957] Key type blacklist registered <6>[ 3.082261] workingset: timestamp_bits=36 max_order=23 bucket_order=0 <6>[ 3.094052] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 3.094194] ntfs3: Enabled Linux POSIX ACLs support <6>[ 3.094203] ntfs3: Read-only LZX/Xpress compression included <5>[ 3.096145] integrity: Platform Keyring initialized <5>[ 3.096172] integrity: Machine keyring initialized <6>[ 3.104043] xor: automatically using best checksumming function avx <5>[ 3.104056] Key type asymmetric registered <5>[ 3.104071] Asymmetric key parser 'x509' registered <6>[ 3.104217] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) <6>[ 3.104877] io scheduler mq-deadline registered <6>[ 3.108556] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 3.111042] pcieport 0000:00:06.0: PME: Signaling with IRQ 122 <6>[ 3.113159] pcieport 0000:00:07.0: PME: Signaling with IRQ 123 <6>[ 3.114940] pcieport 0000:00:07.3: PME: Signaling with IRQ 124 <6>[ 3.117368] ACPI: AC: AC Adapter [ADP1] (on-line) <6>[ 3.117810] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 3.118227] ACPI: button: Lid Switch [LID0] <6>[ 3.118613] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 3.118850] ACPI: button: Sleep Button [SLPB] <6>[ 3.119147] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 3.119387] ACPI: button: Power Button [PWRB] <6>[ 3.240625] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 3.240641] ACPI: thermal: Thermal Zone [TZ00] (40 C) <6>[ 3.242618] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled <6>[ 3.243044] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 3.244630] ACPI: battery: Slot [BAT0] (battery present) <6>[ 3.266371] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 3.286645] serial 0000:00:12.0: enabling device (0000 -> 0002) <6>[ 3.289209] serial 0000:00:16.3: enabling device (0001 -> 0003) <6>[ 3.313359] 0000:00:16.3: ttyS4 at I/O 0x3020 (irq = 19, base_baud = 115200) is a 16550A <5>[ 3.315497] hpet_acpi_add: no address or irqs in _CRS <6>[ 3.315627] Linux agpgart interface v0.103 <6>[ 3.343857] ACPI: bus type drm_connector registered <7>[ 3.345550] initcall simpledrm_platform_driver_init blacklisted <6>[ 3.376394] loop: module loaded <6>[ 3.430706] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 3.516671] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 3.619406] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 3.719389] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <6>[ 3.822597] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002) <6>[ 3.951918] intel-lpss 0000:00:19.1: enabling device (0000 -> 0002) <5>[ 4.077763] Key type psk registered <6>[ 4.080641] nvme 0000:01:00.0: platform quirk: setting simple suspend <6>[ 4.081544] nvme nvme0: pci function 0000:01:00.0 <6>[ 4.081984] tun: Universal TUN/TAP device driver, 1.6 <6>[ 4.083399] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 4.083582] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 4.085598] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 4.087820] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 4.087850] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 4.087874] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 4.088337] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.19 <6>[ 4.088363] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.088375] usb usb1: Product: xHCI Host Controller <6>[ 4.088385] usb usb1: Manufacturer: Linux 6.19.0-rc7-CI_DRM_17902-g6a3c9a03d943+ xhci-hcd <6>[ 4.088398] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 4.089974] hub 1-0:1.0: USB hub found <6>[ 4.090109] hub 1-0:1.0: 1 port detected <6>[ 4.095390] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.19 <6>[ 4.095409] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.095422] usb usb2: Product: xHCI Host Controller <6>[ 4.095431] usb usb2: Manufacturer: Linux 6.19.0-rc7-CI_DRM_17902-g6a3c9a03d943+ xhci-hcd <6>[ 4.095446] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 4.096600] hub 2-0:1.0: USB hub found <6>[ 4.096675] hub 2-0:1.0: 4 ports detected <6>[ 4.141835] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 4.141874] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 4.143782] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 4.146331] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 4.146357] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 4.146385] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 4.146650] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.19 <6>[ 4.146666] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.146679] usb usb3: Product: xHCI Host Controller <6>[ 4.146687] usb usb3: Manufacturer: Linux 6.19.0-rc7-CI_DRM_17902-g6a3c9a03d943+ xhci-hcd <6>[ 4.146701] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 4.147608] hub 3-0:1.0: USB hub found <6>[ 4.147659] hub 3-0:1.0: 12 ports detected <6>[ 4.159446] nvme nvme0: allocated 64 MiB host memory buffer (1 segment). <6>[ 4.189114] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.19 <6>[ 4.189133] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.189145] usb usb4: Product: xHCI Host Controller <6>[ 4.189154] usb usb4: Manufacturer: Linux 6.19.0-rc7-CI_DRM_17902-g6a3c9a03d943+ xhci-hcd <6>[ 4.189168] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 4.189985] hub 4-0:1.0: USB hub found <6>[ 4.190030] hub 4-0:1.0: 2 ports detected <6>[ 4.196607] usbcore: registered new interface driver usb-storage <6>[ 4.196823] usbcore: registered new interface driver usbserial_generic <6>[ 4.196924] usbserial: USB Serial support registered for generic <6>[ 4.197008] usbcore: registered new interface driver ftdi_sio <6>[ 4.197054] usbserial: USB Serial support registered for FTDI USB Serial Device <6>[ 4.197151] usbcore: registered new interface driver pl2303 <6>[ 4.197196] usbserial: USB Serial support registered for pl2303 <6>[ 4.197347] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 4.197360] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <6>[ 4.198096] nvme nvme0: 16/0/0 default/read/poll queues <6>[ 4.208488] nvme0n1: p1 p2 <3>[ 4.898805] i8042: Can't read CTR while initializing i8042 <3>[ 4.898817] i8042 i8042: probe with driver i8042 failed with error -5 <6>[ 4.899409] mousedev: PS/2 mouse device common for all mice <6>[ 4.900653] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 4.902545] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 4.902729] rtc_cmos rtc_cmos: setting system clock to 2026-01-29T06:18:57 UTC (1769667537) <6>[ 4.902928] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 4.902989] i2c_dev: i2c /dev entries driver <6>[ 4.908027] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 4.908043] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 4.908056] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. <6>[ 4.908099] device-mapper: uevent: version 1.0.3 <6>[ 4.908543] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev <6>[ 4.908564] intel_pstate: Intel P-state driver initializing <6>[ 4.918516] intel_pstate: HWP enabled <6>[ 4.918524] sdhci: Secure Digital Host Controller Interface driver <6>[ 4.918529] sdhci: Copyright(c) Pierre Ossman <6>[ 4.918665] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 4.921889] drop_monitor: Initializing network drop monitor service <6>[ 4.922107] NET: Registered PF_INET6 protocol family <6>[ 4.923315] Segment Routing with IPv6 <6>[ 4.923351] In-situ OAM (IOAM) with IPv6 <6>[ 4.923394] NET: Registered PF_PACKET protocol family <5>[ 4.923565] Key type dns_resolver registered <4>[ 4.937081] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 4.938644] microcode: Current revision: 0x0000001c <6>[ 4.940751] IPI shorthand broadcast: enabled <6>[ 4.954557] sched_clock: Marking stable (4945001347, 9498293)->(5025432440, -70932800) <6>[ 4.956814] registered taskstats version 1 <5>[ 4.961572] Loading compiled-in X.509 certificates <6>[ 5.005250] Demotion targets for Node 0: null <6>[ 5.005559] kmemleak: Kernel memory leak detector initialized (mem pool available: 14930) <6>[ 5.005565] kmemleak: Automatic memory scanning thread started <5>[ 5.005827] Key type .fscrypt registered <5>[ 5.005832] Key type fscrypt-provisioning registered <6>[ 5.009122] Btrfs loaded, zoned=yes, fsverity=yes <5>[ 5.009228] Key type trusted registered <5>[ 5.014305] Key type encrypted registered <6>[ 5.014318] AppArmor: AppArmor sha256 policy hashing enabled <5>[ 5.014339] Loading compiled-in module X.509 certificates <5>[ 5.015012] Loaded X.509 cert 'Build time autogenerated kernel key: 559f02af261114dc32a90aaa572c5b41723135a5' <6>[ 5.015023] ima: Allocated hash algorithm: sha256 <6>[ 5.055471] ima: No architecture policies found <6>[ 5.055608] evm: Initialising EVM extended attributes: <6>[ 5.055614] evm: security.selinux <6>[ 5.055618] evm: security.SMACK64 <6>[ 5.055622] evm: security.SMACK64EXEC <6>[ 5.055626] evm: security.SMACK64TRANSMUTE <6>[ 5.055630] evm: security.SMACK64MMAP <6>[ 5.055634] evm: security.apparmor <6>[ 5.055638] evm: security.ima <6>[ 5.055641] evm: security.capability <6>[ 5.055645] evm: HMAC attrs: 0x1 <6>[ 5.058215] PM: Magic number: 10:55:318 <6>[ 5.058220] PM: hash matches drivers/base/power/main.c:1634 <6>[ 5.058279] tty tty43: hash matches <6>[ 5.058409] memory memory172: hash matches <6>[ 5.058485] netconsole: network logging started <6>[ 5.059160] RAS: Correctable Errors collector initialized. <6>[ 5.059340] clk: Disabling unused clocks <6>[ 5.059401] PM: genpd: Disabling unused power domains <4>[ 5.060587] check access for rdinit=/init failed: -2, ignoring <6>[ 5.060593] md: Waiting for all devices to be available before autodetect <6>[ 5.060598] md: If you don't use raid, use raid=noautodetect <6>[ 5.060603] md: Autodetecting RAID arrays. <6>[ 5.060609] md: autorun ... <6>[ 5.060612] md: ... autorun DONE. <6>[ 5.120977] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd <6>[ 5.133126] EXT4-fs (nvme0n1p2): mounted filesystem f122a966-f29a-437f-8b15-4f3e9c2e449d ro with ordered data mode. Quota mode: none. <6>[ 5.133253] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 5.134252] devtmpfs: mounted <6>[ 5.135254] usb 4-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 <6>[ 5.135305] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 <6>[ 5.135328] usb 4-1: Product: USB 10/100/1000 LAN <6>[ 5.135344] usb 4-1: Manufacturer: Realtek <6>[ 5.135357] usb 4-1: SerialNumber: 000001 <6>[ 5.151641] Freeing unused decrypted memory: 2036K <6>[ 5.152910] Freeing unused kernel image (initmem) memory: 5720K <6>[ 5.152938] Write protecting the kernel read-only data: 36864k <6>[ 5.154327] Freeing unused kernel image (text/rodata gap) memory: 1044K <6>[ 5.154880] Freeing unused kernel image (rodata/data gap) memory: 584K <6>[ 5.160641] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 5.178608] Run /sbin/init as init process <7>[ 5.178615] with arguments: <7>[ 5.178616] /sbin/init <7>[ 5.178616] with environment: <7>[ 5.178617] HOME=/ <7>[ 5.178618] TERM=linux <7>[ 5.265863] systemd[1]: Inserted module 'autofs4' <7>[ 5.307267] systemd[1]: systemd 255.4-1ubuntu8.12 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <7>[ 5.307298] systemd[1]: Detected architecture x86-64. <7>[ 5.308913] systemd[1]: Hostname set to . <7>[ 5.580817] systemd[1]: Queued start job for default target graphical.target. <7>[ 5.620063] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. <7>[ 5.622005] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. <7>[ 5.623622] systemd[1]: Created slice user.slice - User and Session Slice. <7>[ 5.623883] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. <7>[ 5.624577] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. <7>[ 5.624701] systemd[1]: Expecting device dev-disk-by\x2duuid-30D0\x2d93C8.device - /dev/disk/by-uuid/30D0-93C8... <7>[ 5.624795] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. <7>[ 5.624880] systemd[1]: Reached target slices.target - Slice Units. <7>[ 5.624952] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. <7>[ 5.625022] systemd[1]: Reached target snapd.mounts.target - Mounted snaps. <7>[ 5.625097] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. <7>[ 5.625345] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. <7>[ 5.625752] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. <7>[ 5.626054] systemd[1]: Listening on multipathd.socket - multipathd control socket. <7>[ 5.626389] systemd[1]: Listening on syslog.socket - Syslog Socket. <7>[ 5.626684] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. <7>[ 5.626908] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. <7>[ 5.627220] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). <7>[ 5.627577] systemd[1]: Listening on systemd-journald.socket - Journal Socket. <7>[ 5.627889] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. <7>[ 5.628098] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 5.628410] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. <7>[ 5.628700] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. <7>[ 5.632330] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... <7>[ 5.635051] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... <7>[ 5.637687] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... <7>[ 5.640645] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... <7>[ 5.653415] systemd[1]: Starting systemd-journald.service - Journal Service... <7>[ 5.656106] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... <7>[ 5.658893] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... <7>[ 5.662009] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... <7>[ 5.664136] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... <7>[ 5.666306] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... <7>[ 5.669694] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... <7>[ 5.672651] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... <7>[ 5.675129] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... <7>[ 5.679346] systemd-journald[306]: Collecting audit messages is disabled. <7>[ 5.680438] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... <7>[ 5.683004] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics... <7>[ 5.683157] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). <7>[ 5.690393] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... <6>[ 5.693122] pstore: Using crash dump compression: deflate <6>[ 5.694729] pstore: Registered efi_pstore as persistent store backend <7>[ 5.694812] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... <7>[ 5.694911] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 5.694978] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <6>[ 5.697984] fuse: init (API version 7.45) <7>[ 5.698667] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... <7>[ 5.704176] systemd[1]: Started systemd-journald.service - Journal Service. <6>[ 5.844386] EXT4-fs (nvme0n1p2): re-mounted f122a966-f29a-437f-8b15-4f3e9c2e449d r/w. <6>[ 5.880050] Adding 8388604k swap on /swap.img. Priority:-1 extents:53 across:700645376k SS <7>[ 5.894377] systemd-journald[306]: Received client request to flush runtime journal. <7>[ 5.916052] systemd-journald[306]: /var/log/journal/a2b4beccbc4f433e8020d3144e250a00/system.journal: Journal file uses a different sequence number ID, rotating. <7>[ 5.916061] systemd-journald[306]: Rotating system journal. <4>[ 6.616819] nvme nvme0: using unchecked data buffer <6>[ 6.723907] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002) <6>[ 6.758556] intel_pmc_ssram_telemetry 0000:00:14.2: enabling device (0000 -> 0002) <6>[ 6.786316] input: Intel HID events as /devices/platform/INTC1077:00/input/input3 <6>[ 6.795375] intel-hid INTC1077:00: platform supports 5 button array <6>[ 6.801330] input: Intel HID 5 button array as /devices/platform/INTC1077:00/input/input4 <3>[ 6.875920] int3472-tps68470 i2c-INT3472:0d: TPS68470 init error -121 <3>[ 6.876083] int3472-tps68470 i2c-INT3472:0d: probe with driver int3472-tps68470 failed with error -121 <4>[ 7.022290] resource: resource sanity check: requesting [mem 0x00000000fedc0000-0x00000000fedcffff], which spans more than pnp 00:04 [mem 0xfedc0000-0xfedc7fff] <4>[ 7.022312] caller igen6_probe+0x190/0x9ea [igen6_edac] mapping multiple BARs <6>[ 7.029221] ACPI: bus type thunderbolt registered <5>[ 7.037748] audit: type=1400 audit(1769667539.633:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=540 comm="apparmor_parser" <5>[ 7.037986] audit: type=1400 audit(1769667539.633:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=539 comm="apparmor_parser" <5>[ 7.038172] audit: type=1400 audit(1769667539.633:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=538 comm="apparmor_parser" <5>[ 7.038363] audit: type=1400 audit(1769667539.633:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=542 comm="apparmor_parser" <5>[ 7.039218] audit: type=1400 audit(1769667539.634:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=541 comm="apparmor_parser" <5>[ 7.041112] audit: type=1400 audit(1769667539.636:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=543 comm="apparmor_parser" <6>[ 7.042534] EDAC MC0: Giving out device to module igen6_edac controller Intel_client_SoC MC#0: DEV 0000:00:00.0 (INTERRUPT) <5>[ 7.044259] audit: type=1400 audit(1769667539.639:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=544 comm="apparmor_parser" <5>[ 7.045296] audit: type=1400 audit(1769667539.640:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=545 comm="apparmor_parser" <5>[ 7.047847] audit: type=1400 audit(1769667539.643:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=546 comm="apparmor_parser" <6>[ 7.048289] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002) <6>[ 7.050655] idma64 idma64.0: Found Intel integrated DMA 64-bit <6>[ 7.050940] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 7.050944] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 7.051034] idma64 idma64.1: Found Intel integrated DMA 64-bit <5>[ 7.051631] audit: type=1400 audit(1769667539.647:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=547 comm="apparmor_parser" <6>[ 7.053370] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode <6>[ 7.057979] pci 0000:00:08.0: Setting to D3hot <6>[ 7.067826] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_37xx_v0.0.bin, version: 20230726*MTL_CLIENT_SILICON-release*2101*ci_tag_mtl_pv_vpu_rc_20230726_2101*648a666b8b9 <6>[ 7.067835] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS <6>[ 7.069623] pci 0000:00:05.0: Setting to D3hot <6>[ 7.082346] EDAC MC1: Giving out device to module igen6_edac controller Intel_client_SoC MC#1: DEV 0000:00:00.0 (INTERRUPT) <6>[ 7.082638] intel_pmc_core INT33A1:00: initialized <6>[ 7.086613] idma64 idma64.2: Found Intel integrated DMA 64-bit <6>[ 7.093738] EDAC igen6: v2.5.1 <6>[ 7.108347] idma64 idma64.3: Found Intel integrated DMA 64-bit <6>[ 7.153709] i801_smbus 0000:00:1f.4: SPD Write Disable is set <6>[ 7.154178] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt <6>[ 7.230930] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0 <6>[ 7.270284] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock <6>[ 7.274450] i2c i2c-6: Successfully instantiated SPD at 0x54 <6>[ 7.275829] i2c i2c-6: Successfully instantiated SPD at 0x56 <6>[ 7.293046] usbcore: registered new device driver r8152-cfgselector <6>[ 7.295469] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 7.295473] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 7.295474] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 7.295475] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules <6>[ 7.295476] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 7.300440] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 7.302178] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.312577] proc_thermal_pci 0000:00:04.0: enabling device (0000 -> 0002) <6>[ 7.326367] intel_rapl_common: Found RAPL domain package <6>[ 7.353045] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.382258] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88 <6>[ 7.382265] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection <6>[ 7.382384] e1000e 0000:00:1f.6 eth0: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF <6>[ 7.386056] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.497805] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.502468] r8152-cfgselector 4-1: reset SuperSpeed USB device number 2 using xhci_hcd <6>[ 7.520960] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.525177] intel_rapl_msr: PL4 support detected. <6>[ 7.525990] intel_rapl_common: Found RAPL domain package <6>[ 7.525995] intel_rapl_common: Found RAPL domain core <6>[ 7.525998] intel_rapl_common: Found RAPL domain uncore <6>[ 7.526001] intel_rapl_common: Found RAPL domain psys <6>[ 7.528387] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.561565] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.582810] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.585177] e1000e 0000:00:1f.6 eno0: renamed from eth0 <4>[ 7.593632] spi-nor spi0.0: supply vcc not found, using dummy regulator <6>[ 7.595379] r8152 4-1:1.0 eth0: v1.12.13 <6>[ 7.595589] usbcore: registered new interface driver r8152 <6>[ 7.600724] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.605484] usbcore: registered new interface driver cdc_ether <5>[ 7.611175] Creating 1 MTD partitions on "0000:00:1f.5": <5>[ 7.611251] 0x000000000000-0x000002000000 : "BIOS" <6>[ 7.611399] usbcore: registered new interface driver r8153_ecm <6>[ 7.613952] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.623797] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.626283] hid: raw HID events driver (C) Jiri Kosina <6>[ 7.633096] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6 <6>[ 7.663267] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.667624] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.669398] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.670158] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.671179] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.672582] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.674160] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 7.674775] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 7.675625] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.681360] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.684096] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.689147] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.689155] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.692890] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.693464] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.696058] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.697469] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.698938] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 7.700483] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 7.700566] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.703599] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.769552] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.774531] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.777987] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.780701] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.784316] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.788598] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.795564] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.802535] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.805358] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.809617] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.816188] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.821126] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.824413] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.827583] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.831781] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.835234] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.839660] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.842529] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.846211] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.850911] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.865433] r8152 4-1:1.0 enxe2015072f1a3: renamed from eth0 <4>[ 7.968923] block nvme0n1: No UUID available providing old NGUID <6>[ 8.135399] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.346425] loop0: detected capacity change from 0 to 8 <6>[ 8.492921] Consider using thermal netlink events interface <6>[ 10.584028] r8152 4-1:1.0 enxe2015072f1a3: carrier on <3>[ 16.665808] ucsi_acpi USBC000:00: error -ETIMEDOUT: PPM init failed <7>[ 17.072541] systemd-journald[306]: /var/log/journal/a2b4beccbc4f433e8020d3144e250a00/user-1000.journal: Journal file uses a different sequence number ID, rotating. <6>[ 17.746051] /proc/cgroups lists only v1 controllers, use cgroup.controllers of root cgroup for v2 info <6>[ 18.556318] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 18.560014] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component <7>[ 49.240734] [IGT] i915_module_load: executing <4>[ 49.240792] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <7>[ 49.318231] [IGT] i915_module_load: starting subtest load <4>[ 49.900758] ********************************************************** <4>[ 49.900759] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 49.900760] ** ** <4>[ 49.900760] ** trace_printk() being used. Allocating extra memory. ** <4>[ 49.900761] ** ** <4>[ 49.900762] ** This means that this is a DEBUG kernel and it is ** <4>[ 49.900763] ** unsafe for production use. ** <4>[ 49.900763] ** ** <4>[ 49.900764] ** If you see this message and you are not debugging ** <4>[ 49.900765] ** the kernel, report this immediately to your vendor! ** <4>[ 49.900765] ** ** <4>[ 49.900766] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 49.900767] ********************************************************** <5>[ 49.936262] Setting dangerous option force_probe - tainting kernel <6>[ 49.940641] i915 0000:00:02.0: [drm] Found meteorlake (device ID 7d55) integrated display version 14.00 stepping C0 <7>[ 49.941858] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K <7>[ 49.942090] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:no slpc:yes) <7>[ 49.942261] i915 0000:00:02.0: [drm:intel_pch_detect [i915]] PCH not involved in display, using fake PCH type 1026 for south display <7>[ 49.942420] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7>[ 49.942604] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7>[ 49.942765] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT1: Setting up Standalone Media GT <7>[ 49.942958] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K <7>[ 49.943175] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT1: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes) <7>[ 49.943414] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7>[ 49.943585] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 38400 kHz <7>[ 49.943864] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vdbox enable: 0000, instances: 0000 <7>[ 49.944001] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vebox enable: 0000, instances: 0000 <7>[ 49.944528] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vdbox enable: 0005, instances: 0005 <7>[ 49.944660] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vebox enable: 0001, instances: 0001 <7>[ 49.945081] i915 0000:00:02.0: [drm:ggtt_probe_common [i915]] Using direct GSM access <7>[ 49.945366] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7>[ 49.945491] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 0M <7>[ 49.945611] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M <6>[ 49.945730] i915 0000:00:02.0: [drm] VT-d active for gfx access <6>[ 49.946048] i915 0000:00:02.0: vgaarb: deactivate vga console <6>[ 49.946396] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7>[ 49.946405] i915 0000:00:02.0: [drm:i915_gem_stolen_lmem_setup [i915]] Using direct DSM access <7>[ 49.946567] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000078400947 <7>[ 49.947093] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 131072K, usable: 126976K <7>[ 49.947370] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 31513 MiB [mem 0x00000000-0x7b1942fff], io: n/a <7>[ 49.947502] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(6): stolen-local: 124 MiB [mem 0x00800000-0x083fffff], io: 124 MiB [mem 0x70800000-0x783fffff] <7>[ 49.947829] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x63e09018 <7>[ 49.948006] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 3.0.0 <7>[ 49.948167] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7>[ 49.948310] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7>[ 49.948450] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7>[ 49.948589] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Mailbox #2 for backlight present <7>[ 49.948744] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 49.948888] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR5 <7>[ 49.949045] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 8 <7>[ 49.949209] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 4 <7>[ 49.949357] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7>[ 49.949510] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=3200 tRP=64 tRDPRE=40 tRAS=136 tRCD=64 tRC=200 <7>[ 49.949673] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=6000 tRP=112 tRDPRE=80 tRAS=0 tRCD=112 tRC=112 <7>[ 49.949830] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=16 tRCD=120 tRC=136 <7>[ 49.949985] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 3: DCLK=5600 tRP=104 tRDPRE=80 tRAS=240 tRCD=104 tRC=344 <7>[ 49.950145] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 0: num_planes=0 deratedbw=28913 peakbw: 51200 <7>[ 49.950293] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 49.950438] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 49.950580] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 49.950722] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 0: num_planes=0 deratedbw=35532 peakbw: 51200 <7>[ 49.950863] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 49.951004] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 49.951156] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 49.951297] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 49.951437] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 49.951577] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 49.951720] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 49.951863] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 49.952006] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 49.952162] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 49.952303] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 49.952444] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 49.952584] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 49.952724] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 49.952863] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 49.953013] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 49.953162] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 49.953302] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 49.953442] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 49.954375] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7>[ 49.954549] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT METEORLAKE ", BDB version 253 <7>[ 49.954701] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7) <7>[ 49.954848] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5) <7>[ 49.955011] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7>[ 49.955155] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7>[ 49.955297] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 850) <7>[ 49.955438] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34) <7>[ 49.955575] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7>[ 49.955736] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7>[ 49.955879] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366) <7>[ 49.956038] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305) <7>[ 49.956180] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 98, min size 136) <7>[ 49.956319] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7>[ 49.956462] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7>[ 49.956600] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 49.956738] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7>[ 49.956875] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7>[ 49.957030] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7>[ 49.957169] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 49.957314] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7>[ 49.957457] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 49.957599] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 49.957740] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7>[ 49.957880] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 49.958036] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 49.958175] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 49.958313] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 49.958451] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 49.958593] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 49.958740] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a <7>[ 49.958922] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 49.959131] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7>[ 49.959320] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 49.959540] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 49.959783] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7>[ 49.959969] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7>[ 49.960117] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 49.960265] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 49.960462] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7>[ 49.960626] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7>[ 49.960801] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B <7>[ 49.960972] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C <7>[ 49.961122] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D <7>[ 49.961700] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/mtl_dmc.bin <7>[ 49.962669] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7>[ 49.963762] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us <7>[ 49.963928] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7>[ 49.964081] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 85 (85.0 usec) <7>[ 49.964227] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 86 (86.0 usec) <7>[ 49.964369] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 101 (101.0 usec) <7>[ 49.964523] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 102 (102.0 usec) <7>[ 49.964666] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 155 (155.0 usec) <7>[ 49.964818] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 6 (6.0 usec) <7>[ 49.964957] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 91 (91.0 usec) <7>[ 49.965098] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 92 (92.0 usec) <7>[ 49.965237] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 107 (107.0 usec) <7>[ 49.965374] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 108 (108.0 usec) <7>[ 49.965510] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 161 (161.0 usec) <7>[ 49.967699] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7>[ 49.967873] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x86fc0 <7>[ 49.968025] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7>[ 49.968171] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f004 = 0x42c0408 (EVT_HTP) <7>[ 49.968315] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL) <7>[ 49.968460] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x8f008 = 0x534052f4 (EVT_HTP) <7>[ 49.968613] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 1: <7>[ 49.968776] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f074 = 0x96fc0 <7>[ 49.968920] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling) <7>[ 49.969063] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f004 = 0x212c20f4 (EVT_HTP) <7>[ 49.969205] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling) <7>[ 49.969348] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f008 = 0x222021e8 (EVT_HTP) <7>[ 49.969490] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 49.969636] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f00c = 0x23f422dc (EVT_HTP) <7>[ 49.969787] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 49.969950] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f010 = 0x26ec26c0 (EVT_HTP) <7>[ 49.970106] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 2: <7>[ 49.970253] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f474 = 0x9efc0 <7>[ 49.970416] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling) <7>[ 49.970560] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f404 = 0xa618a5e0 (EVT_HTP) <7>[ 49.970724] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling) <7>[ 49.970864] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f408 = 0xa70ca6d4 (EVT_HTP) <7>[ 49.971005] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 49.971146] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f40c = 0xa8e0a7c8 (EVT_HTP) <7>[ 49.971287] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 49.971431] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f410 = 0xabd8abac (EVT_HTP) <7>[ 49.971595] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 3: <7>[ 49.971742] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f874 = 0x53fc0 <7>[ 49.971889] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 49.972036] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f80c = 0x24a02388 (EVT_HTP) <7>[ 49.972183] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 49.972326] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f810 = 0x2798276c (EVT_HTP) <7>[ 49.972413] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 4 display pipes available. <7>[ 49.972480] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 4: <7>[ 49.972640] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5fc74 = 0x5afc0 <7>[ 49.972793] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 49.972950] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5fc0c = 0x94a09388 (EVT_HTP) <7>[ 49.973113] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5fc40 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 49.973265] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5fc10 = 0x9798976c (EVT_HTP) <7>[ 49.979160] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 49.979337] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz <7>[ 49.979516] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 1305600 kHz <7>[ 49.981176] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:506:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 49.981681] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:506:DDI A/PHY A] <7>[ 49.981909] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7>[ 49.982065] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <6>[ 49.982219] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/mtl_dmc.bin (v2.23) <7>[ 49.982213] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7>[ 49.982377] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 49.982521] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7>[ 49.982667] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7>[ 49.982815] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7>[ 49.982960] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7>[ 49.983104] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 49.983272] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:506:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 49.983508] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 49.983678] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 49.983836] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 49.983979] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 49.984120] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 49.984412] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 49.984724] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 49.986228] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turning VDD on <7>[ 49.986498] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 49.987700] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 00 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 49.988072] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7>[ 49.989022] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 04 83 85 04 00 <7>[ 49.989881] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 3 <7>[ 49.990333] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] PSR2 supported <7>[ 49.991743] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 49.997446] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 49.997456] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor <7>[ 49.997461] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0 <7>[ 49.997507] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:507:eDP-1] using preferred EDID fixed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 49.997970] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:507:eDP-1] Performing OUI wait (0 ms) <7>[ 49.998439] i915 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [i915]] [CONNECTOR:507:eDP-1] Detected unsupported HDR backlight interface version 0 <7>[ 49.998617] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:507:eDP-1] DRRS type: none <7>[ 49.998857] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:507:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 49.999114] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:507:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 49.999338] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 49.999494] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 49.999628] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 49.999762] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 49.999894] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 50.000174] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 50.000483] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:515:DDI B/PHY B] Using AUX CH B (VBT) <7>[ 50.000653] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:515:DDI B/PHY B] <7>[ 50.001060] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:515:DDI B/PHY B] <7>[ 50.001222] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:515:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7>[ 50.001567] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:533:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 50.001940] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 50.002267] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:533:DDI TC1/PHY TC1] <7>[ 50.002603] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:542:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 50.002842] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected) <7>[ 50.003221] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7>[ 50.003406] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:542:DDI TC2/PHY TC2] <7>[ 50.003560] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:542:DDI TC2/PHY TC2] Using DDC pin 0xa (VBT) <7>[ 50.003782] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:546:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 50.004054] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port F/TC#3: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 50.004319] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:546:DDI TC3/PHY TC3] <7>[ 50.004613] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:555:DDI TC4/PHY TC4] Using AUX CH USBC4 (VBT) <7>[ 50.004835] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port G/TC#4: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 50.005068] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:555:DDI TC4/PHY TC4] <7>[ 50.005510] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled <6>[ 50.005668] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io:owns=io+mem <7>[ 50.006451] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:150:pipe A] hw state readout: enabled <7>[ 50.006773] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:268:pipe B] hw state readout: disabled <7>[ 50.007102] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:386:pipe C] hw state readout: disabled <7>[ 50.007424] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:504:pipe D] hw state readout: disabled <7>[ 50.007575] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] hw state readout: enabled, pipe A <7>[ 50.007728] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:64:plane 2A] hw state readout: disabled, pipe A <7>[ 50.007876] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 3A] hw state readout: disabled, pipe A <7>[ 50.008032] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:124:plane 4A] hw state readout: disabled, pipe A <7>[ 50.008191] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:134:plane 5A] hw state readout: disabled, pipe A <7>[ 50.008347] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:144:cursor A] hw state readout: disabled, pipe A <7>[ 50.008499] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B <7>[ 50.008645] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B <7>[ 50.008798] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B <7>[ 50.008947] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B <7>[ 50.009093] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B <7>[ 50.009237] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:262:cursor B] hw state readout: disabled, pipe B <7>[ 50.009384] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:270:plane 1C] hw state readout: disabled, pipe C <7>[ 50.009530] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:300:plane 2C] hw state readout: disabled, pipe C <7>[ 50.009682] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:330:plane 3C] hw state readout: disabled, pipe C <7>[ 50.009829] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:360:plane 4C] hw state readout: disabled, pipe C <7>[ 50.010001] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:370:plane 5C] hw state readout: disabled, pipe C <7>[ 50.010174] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:380:cursor C] hw state readout: disabled, pipe C <7>[ 50.010347] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:388:plane 1D] hw state readout: disabled, pipe D <7>[ 50.010492] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:418:plane 2D] hw state readout: disabled, pipe D <7>[ 50.010639] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:448:plane 3D] hw state readout: disabled, pipe D <7>[ 50.010807] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:478:plane 4D] hw state readout: disabled, pipe D <7>[ 50.010985] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:488:plane 5D] hw state readout: disabled, pipe D <7>[ 50.011161] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:498:cursor D] hw state readout: disabled, pipe D <7>[ 50.012275] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 50.012471] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:506:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 50.012632] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:515:DDI B/PHY B] hw state readout: disabled, pipe A <7>[ 50.012771] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:517:DP-MST A] hw state readout: disabled, pipe A <7>[ 50.012922] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:518:DP-MST B] hw state readout: disabled, pipe B <7>[ 50.013072] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:519:DP-MST C] hw state readout: disabled, pipe C <7>[ 50.013212] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:520:DP-MST D] hw state readout: disabled, pipe D <7>[ 50.013406] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 50.013550] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:533:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 50.013700] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:535:DP-MST A] hw state readout: disabled, pipe A <7>[ 50.013855] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:536:DP-MST B] hw state readout: disabled, pipe B <7>[ 50.014016] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:537:DP-MST C] hw state readout: disabled, pipe C <7>[ 50.014179] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:538:DP-MST D] hw state readout: disabled, pipe D <7>[ 50.014373] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 50.014515] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:542:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 50.014678] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 50.014833] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:546:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 50.014994] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:548:DP-MST A] hw state readout: disabled, pipe A <7>[ 50.015143] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:549:DP-MST B] hw state readout: disabled, pipe B <7>[ 50.015277] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:550:DP-MST C] hw state readout: disabled, pipe C <7>[ 50.015410] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:551:DP-MST D] hw state readout: disabled, pipe D <7>[ 50.015563] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port G/TC#4: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 50.015700] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:555:DDI TC4/PHY TC4] hw state readout: disabled, pipe A <7>[ 50.015854] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:557:DP-MST A] hw state readout: disabled, pipe A <7>[ 50.016006] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:558:DP-MST B] hw state readout: disabled, pipe B <7>[ 50.016154] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:559:DP-MST C] hw state readout: disabled, pipe C <7>[ 50.016294] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:560:DP-MST D] hw state readout: disabled, pipe D <7>[ 50.017244] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:150:pipe A] reserving DPLL 0 <7>[ 50.017394] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x1, on 1 <7>[ 50.017551] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 50.017697] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7>[ 50.017859] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 50.018017] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7>[ 50.018163] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7>[ 50.018308] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7>[ 50.018563] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:507:eDP-1] hw state readout: enabled <7>[ 50.018731] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:516:DP-1] hw state readout: disabled <7>[ 50.018900] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:528:HDMI-A-1] hw state readout: disabled <7>[ 50.019060] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:534:DP-2] hw state readout: disabled <7>[ 50.019217] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:543:HDMI-A-2] hw state readout: disabled <7>[ 50.019369] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:547:DP-3] hw state readout: disabled <7>[ 50.019544] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:556:DP-4] hw state readout: disabled <7>[ 50.019759] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] min_cdclk 256910 kHz <7>[ 50.019906] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:64:plane 2A] min_cdclk 0 kHz <7>[ 50.020049] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 3A] min_cdclk 0 kHz <7>[ 50.020183] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:124:plane 4A] min_cdclk 0 kHz <7>[ 50.020316] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:134:plane 5A] min_cdclk 0 kHz <7>[ 50.020464] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:144:cursor A] min_cdclk 0 kHz <7>[ 50.020602] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:150:pipe A] min_cdclk 256910 kHz <7>[ 50.020746] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:152:plane 1B] min_cdclk 0 kHz <7>[ 50.020888] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:182:plane 2B] min_cdclk 0 kHz <7>[ 50.021023] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:212:plane 3B] min_cdclk 0 kHz <7>[ 50.021155] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:242:plane 4B] min_cdclk 0 kHz <7>[ 50.021290] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:252:plane 5B] min_cdclk 0 kHz <7>[ 50.021431] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:262:cursor B] min_cdclk 0 kHz <7>[ 50.021569] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:268:pipe B] min_cdclk 0 kHz <7>[ 50.021708] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:270:plane 1C] min_cdclk 0 kHz <7>[ 50.021845] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:300:plane 2C] min_cdclk 0 kHz <7>[ 50.021978] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:330:plane 3C] min_cdclk 0 kHz <7>[ 50.022109] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:360:plane 4C] min_cdclk 0 kHz <7>[ 50.022241] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:370:plane 5C] min_cdclk 0 kHz <7>[ 50.022372] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:380:cursor C] min_cdclk 0 kHz <7>[ 50.022519] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:386:pipe C] min_cdclk 0 kHz <7>[ 50.022653] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:388:plane 1D] min_cdclk 0 kHz <7>[ 50.022787] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:418:plane 2D] min_cdclk 0 kHz <7>[ 50.022919] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:448:plane 3D] min_cdclk 0 kHz <7>[ 50.023051] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:478:plane 4D] min_cdclk 0 kHz <7>[ 50.023182] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:488:plane 5D] min_cdclk 0 kHz <7>[ 50.023316] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:498:cursor D] min_cdclk 0 kHz <7>[ 50.023461] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:504:pipe D] min_cdclk 0 kHz <7>[ 50.023797] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:150:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 50.023939] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 50.024078] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:386:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 50.024215] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:504:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 50.024361] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe A data rate 2055280 num active planes 1 <7>[ 50.024516] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe B data rate 0 num active planes 0 <7>[ 50.024666] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe C data rate 0 num active planes 0 <7>[ 50.024811] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe D data rate 0 num active planes 0 <7>[ 50.025027] i915 0000:00:02.0: [drm:intel_cmtg_sanitize [i915]] CMTG readout: CMTG A: enabled, CMTG B: n/a, Transcoder A secondary: yes, Transcoder B secondary: no <7>[ 50.025367] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:150:pipe A] enable: yes [setup_hw_state] <7>[ 50.025516] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 50.025663] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 50.025809] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 50.025953] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 50.026096] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7>[ 50.026237] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 50.026388] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 623587, link_n: 524288, tu: 64 <7>[ 50.026529] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 50.026669] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7>[ 50.026808] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7>[ 50.026947] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7>[ 50.027086] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7>[ 50.027224] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 50.027378] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7>[ 50.027519] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7>[ 50.027659] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7>[ 50.027800] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7>[ 50.027940] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7>[ 50.028080] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 50.028222] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 50.028408] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 50.028552] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 50.028693] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 50.028834] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 513820, min cdclk 256910 <7>[ 50.028974] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 50.029113] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 50.029284] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 50.029427] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 50.029568] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 50.029707] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: fracen: no, <7>[ 50.029845] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 225, tx_clk_div: 1. <7>[ 50.029984] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state: <7>[ 50.030121] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21 <7>[ 50.030271] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 50.030409] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 50.030548] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 50.030690] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 50.030830] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 50.030970] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 50.031108] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 50.031257] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 50.031398] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.031541] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.031683] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.031823] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 50.031962] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 50.032100] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.032246] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.032389] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.032531] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 50.032672] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 50.032813] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:268:pipe B] enable: no [setup_hw_state] <7>[ 50.032952] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:386:pipe C] enable: no [setup_hw_state] <7>[ 50.033090] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:504:pipe D] enable: no [setup_hw_state] <7>[ 50.033238] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] TBT PLL enabled but not in use, disabling <7>[ 50.033749] i915 0000:00:02.0: [drm:skl_get_initial_plane_config [i915]] [CRTC:150:pipe A][PLANE:34:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800 <7>[ 50.033901] i915 0000:00:02.0: [drm:initial_plane_vma [i915]] Using dma_addr=0x0000000000800000, based on initial plane programming <7>[ 50.034049] i915 0000:00:02.0: [drm:_i915_gem_object_stolen_init [i915]] creating preallocated stolen object: stolen_offset=0x0000000000000000, size=0x00000000013c7000 <7>[ 50.034546] i915 0000:00:02.0: [drm:initial_plane_vma [i915]] Initial plane fb bound to 0x0 in the ggtt (original 0xfec00000) <7>[ 50.043104] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [2048K, 832K) <7>[ 50.048832] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [1040K, 832K) <7>[ 50.048987] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [13c7000, fee00000] <7>[ 50.049127] i915 0000:00:02.0: [drm:nop_init_clock_gating [i915]] No clock gating settings or workarounds applied. <7>[ 50.049266] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: L3BANK steering: group=0x0, instance=0x0 <7>[ 50.049408] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: DSS steering: group=0x0, instance=0x0 <7>[ 50.049543] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: INSTANCE 0 steering: group=0x0, instance=0x0 <7>[ 50.049684] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7>[ 50.051948] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 7 engine workarounds on rcs'0 <7>[ 50.052106] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 whitelist workarounds on rcs'0 <7>[ 50.052255] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 7 context workarounds on rcs'0 <7>[ 50.053116] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 engine workarounds on bcs'0 <7>[ 50.053271] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 context workarounds on bcs'0 <7>[ 50.053681] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 engine workarounds on ccs'0 <7>[ 50.053833] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 context workarounds on ccs'0 <7>[ 50.054935] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 50.055108] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 24 ext-regs. <7>[ 50.055277] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7>[ 50.075265] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0x13c804f <7>[ 50.075462] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x410800 <7>[ 50.075610] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4 <7>[ 50.075754] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7>[ 50.075895] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x2f92 <7>[ 50.076034] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x7d550008 <7>[ 50.076183] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7>[ 50.076321] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7>[ 50.076458] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7>[ 50.076594] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7>[ 50.076730] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7>[ 50.076865] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7>[ 50.077001] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7>[ 50.077147] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <6>[ 50.078058] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/mtl_guc_70.bin version 70.53.0 <7>[ 50.087946] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 8ms, freq = 1600MHz -> 1850MHz vs 2250MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 50.088847] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6>[ 50.090404] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6>[ 50.090406] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <6>[ 50.090861] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled <7>[ 50.091203] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT0: GUC: Querying HW config table: size = 0, offset = 0x00000000 <7>[ 50.091962] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT0: GUC: Querying HW config table: size = 752, offset = 0x01FFC000 <7>[ 50.099459] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: OADDRM steering: group=0x0, instance=0x0 <7>[ 50.099651] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 5 GT workarounds on global <7>[ 50.101067] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'0 <7>[ 50.101236] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'0 <7>[ 50.102142] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'2 <7>[ 50.102300] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'2 <7>[ 50.102904] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vecs'0 <7>[ 50.103058] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vecs'0 <7>[ 50.104044] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on other'6 <7>[ 50.104215] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on other'6 <7>[ 50.106008] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT1: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 50.106204] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT1: GUC: capture found 24 ext-regs. <7>[ 50.106367] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT1: GUC: Used 4 KB for temporary ADS regset <7>[ 50.127229] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 0] = 0x1ffd04f <7>[ 50.127404] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 1] = 0x400000 <7>[ 50.127556] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 2] = 0x4 <7>[ 50.127703] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 3] = 0x3 <7>[ 50.127846] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 4] = 0x47fc <7>[ 50.127998] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 5] = 0x7d550008 <7>[ 50.128137] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 6] = 0x0 <7>[ 50.128275] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 7] = 0x0 <7>[ 50.128412] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 8] = 0x0 <7>[ 50.128548] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 9] = 0x0 <7>[ 50.128684] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[10] = 0x0 <7>[ 50.128819] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[11] = 0x0 <7>[ 50.129091] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[12] = 0x0 <7>[ 50.129241] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[13] = 0x0 <7>[ 50.129377] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT1: HuC: loaded by GSC = no <7>[ 50.133641] i915 0000:00:02.0: [drm:i915_gsc_proxy_component_bind [i915]] GT1: GSC proxy mei component bound <6>[ 50.133841] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops i915_gsc_proxy_component_ops [i915]) <6>[ 50.134349] i915 0000:00:02.0: [drm] GT1: GuC firmware i915/mtl_guc_70.bin version 70.53.0 <6>[ 50.134351] i915 0000:00:02.0: [drm] GT1: HuC firmware i915/mtl_huc_gsc.bin version 8.5.4 <7>[ 50.147531] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT1: GUC: init took 12ms, freq = 1250MHz -> 1300MHz vs 1300MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 50.147806] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled <7>[ 50.156312] i915 0000:00:02.0: [drm:intel_huc_wait_for_auth_complete [i915]] GT1: HuC: auth took 8ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x0000C1DC, count = 0, ret = 0 <6>[ 50.156468] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for clear media <6>[ 50.157352] i915 0000:00:02.0: [drm] GT1: GUC: submission enabled <6>[ 50.157354] i915 0000:00:02.0: [drm] GT1: GUC: SLPC enabled <6>[ 50.157622] i915 0000:00:02.0: [drm] GT1: GUC: RC enabled <7>[ 50.157809] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT1: GUC: Querying HW config table: size = 0, offset = 0x00000000 <7>[ 50.158462] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT1: GUC: Querying HW config table: size = 752, offset = 0xFEDBD000 <7>[ 50.165296] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7>[ 50.165642] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7>[ 50.165867] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7>[ 50.166180] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'2 to vcs1 <7>[ 50.166394] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7>[ 50.166604] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed ccs'0 to ccs0 <7>[ 50.166810] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed other'6 to other0 <6>[ 50.168716] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized <7>[ 50.169910] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:150:pipe A] FQ 0: start 0x90008 <7>[ 50.170102] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:150:pipe A] FQ 1: start 0x90108 <7>[ 50.170269] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:150:pipe A] FQ 2: start 0x90208 <7>[ 50.170434] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:150:pipe A] FQ 3: start 0x90308 <7>[ 50.170595] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:150:pipe A] FQ 4: start 0x903c8 <7>[ 50.170751] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:268:pipe B] FQ 0: start 0x98008 <7>[ 50.170912] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:268:pipe B] FQ 1: start 0x98108 <7>[ 50.171064] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:268:pipe B] FQ 2: start 0x98208 <7>[ 50.171216] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:268:pipe B] FQ 3: start 0x98308 <7>[ 50.171367] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:268:pipe B] FQ 4: start 0x983c8 <7>[ 50.171518] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:386:pipe C] FQ 0: start 0x52008 <7>[ 50.171668] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:386:pipe C] FQ 1: start 0x52108 <7>[ 50.171818] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:386:pipe C] FQ 2: start 0x52208 <7>[ 50.171980] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:386:pipe C] FQ 3: start 0x52308 <7>[ 50.172130] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:386:pipe C] FQ 4: start 0x523c8 <7>[ 50.172288] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:504:pipe D] FQ 0: start 0x59008 <7>[ 50.172441] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:504:pipe D] FQ 1: start 0x59108 <7>[ 50.172592] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:504:pipe D] FQ 2: start 0x59208 <7>[ 50.172742] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:504:pipe D] FQ 3: start 0x59308 <7>[ 50.172912] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:504:pipe D] FQ 4: start 0x593c8 <7>[ 50.173798] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 50.174419] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:150:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 50.175020] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 2048) -> ( 0 - 4001), size 2048 -> 4001 <7>[ 50.175494] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:144:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95 <7>[ 50.175985] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm <7>[ 50.176256] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 2, 2, 2, 2, 2, 2, 0, 0, 1, 3, 1 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 <7>[ 50.176498] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 49, 49, 49, 49, 49, 49, 0, 0, 7, 73, 7 -> 49, 385, 385, 457, 457, 673, 0, 0, 0, 73, 0 <7>[ 50.176739] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 0, 82, 0 <7>[ 50.177066] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:268:pipe B] enable: no [fastset] <7>[ 50.177271] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:386:pipe C] enable: no [fastset] <7>[ 50.177452] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:504:pipe D] enable: no [fastset] <7>[ 50.179651] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 42393600 bytes of contiguous stolen space for FBC, limit: 1 <7>[ 50.179828] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:34:plane 1A] <7>[ 50.180030] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: no -> yes (pipe: A) <7>[ 50.180193] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 4 (mbus joined: yes) <7>[ 50.185489] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:268:pipe B] <7>[ 50.185883] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:386:pipe C] <7>[ 50.186217] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:504:pipe D] <7>[ 50.189833] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:507:eDP-1] adding connector to sysfs <7>[ 50.192107] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:507:eDP-1] backlight device intel_backlight registered <7>[ 50.192294] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:507:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7>[ 50.192475] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:507:eDP-1] Panel prepare <7>[ 50.192842] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 50.193942] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:507:eDP-1] generating connector hotplug event <7>[ 50.193998] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:516:DP-1] adding connector to sysfs <7>[ 50.194384] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7>[ 50.195022] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:516:DP-1] generating connector hotplug event <7>[ 50.195053] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:528:HDMI-A-1] adding connector to sysfs <7>[ 50.195286] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:528:HDMI-A-1] generating connector hotplug event <7>[ 50.195315] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:534:DP-2] adding connector to sysfs <7>[ 50.195767] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2 <7>[ 50.196825] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:534:DP-2] generating connector hotplug event <7>[ 50.196863] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:543:HDMI-A-2] adding connector to sysfs <7>[ 50.197136] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:543:HDMI-A-2] generating connector hotplug event <7>[ 50.197172] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:547:DP-3] adding connector to sysfs <7>[ 50.197574] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 50.198273] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:547:DP-3] generating connector hotplug event <7>[ 50.198309] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:556:DP-4] adding connector to sysfs <7>[ 50.198685] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY TC4 bus for card0-DP-4 <7>[ 50.199427] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:556:DP-4] generating connector hotplug event <6>[ 50.199456] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7>[ 50.201801] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected <6>[ 50.213609] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 50.216751] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 <7>[ 50.217929] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 50.218150] i915 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [i915]] aud_ts_cdclk set to M=60, N=768 <7>[ 50.218710] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 50.218716] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7>[ 50.219784] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] found possible fb from [PLANE:34:plane 1A] <7>[ 50.219940] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:516:DP-1] <7>[ 50.220022] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:268:pipe B] not active, skipping <7>[ 50.220288] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:386:pipe C] not active, skipping <7>[ 50.220547] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:504:pipe D] not active, skipping <7>[ 50.220894] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] checking [PLANE:34:plane 1A] for BIOS fb <7>[ 50.221166] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:150:pipe A] area: 2880x1800, bpp: 32, size: 20736000 <7>[ 50.221462] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] fb big enough [PLANE:34:plane 1A] (20738048 >= 20736000) <7>[ 50.221740] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:268:pipe B] not active, skipping <7>[ 50.221915] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:386:pipe C] not active, skipping <7>[ 50.222200] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:504:pipe D] not active, skipping <7>[ 50.222500] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] using BIOS fb for initial console <7>[ 50.222958] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 50.224407] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:516:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.224601] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1] <7>[ 50.225637] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 50.228775] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:528:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.228998] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:534:DP-2] <7>[ 50.229477] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 50.229788] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:534:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.229995] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:543:HDMI-A-2] <7>[ 50.230371] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7>[ 50.234546] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:543:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.234744] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:547:DP-3] <7>[ 50.235041] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 50.235280] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:547:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.235467] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:556:DP-4] <7>[ 50.235763] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 50.236028] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:556:DP-4] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.236191] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <6>[ 50.236442] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7>[ 50.236551] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] <7>[ 50.236561] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1] <7>[ 50.237434] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 50.237986] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 50.238478] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 50.238679] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 50.238866] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 50.239141] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 50.239147] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor <7>[ 50.239151] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0 <7>[ 50.239175] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: no <7>[ 50.239343] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 50.239495] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 50.240366] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] status updated from unknown to connected <7>[ 50.240799] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes: <7>[ 50.240808] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 50.240815] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] <7>[ 50.240820] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:516:DP-1] <7>[ 50.241468] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 50.242271] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9a01 <7>[ 50.242828] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7>[ 50.242838] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7>[ 50.245100] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] disconnected <7>[ 50.245111] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] <7>[ 50.245116] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1] <7>[ 50.249433] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected <7>[ 50.249441] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] <7>[ 50.249446] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:534:DP-2] <7>[ 50.250005] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected <7>[ 50.250012] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:HDMI-A-2] <7>[ 50.250016] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:543:HDMI-A-2] <7>[ 50.254464] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:HDMI-A-2] disconnected <7>[ 50.254473] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:547:DP-3] <7>[ 50.254479] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:547:DP-3] <7>[ 50.255073] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:547:DP-3] disconnected <7>[ 50.255080] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:556:DP-4] <7>[ 50.255084] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:556:DP-4] <7>[ 50.255389] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:556:DP-4] disconnected <7>[ 50.255393] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] enabled? yes <7>[ 50.255396] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:516:DP-1] enabled? no <7>[ 50.255398] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:528:HDMI-A-1] enabled? no <7>[ 50.255401] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:DP-2] enabled? no <7>[ 50.255403] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:HDMI-A-2] enabled? no <7>[ 50.255405] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:547:DP-3] enabled? no <7>[ 50.255407] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:556:DP-4] enabled? no <7>[ 50.255513] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 50.255532] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] found preferred mode: 2880x1800 <7>[ 50.255535] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 50.255545] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 2880x1800 set (0,0) <7>[ 50.255652] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7>[ 50.255670] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] re-using BIOS fb <7>[ 50.255871] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 2880x1800 fb: 0x00000000 <6>[ 50.257579] fbcon: i915drmfb (fb0) is primary device <7>[ 50.259000] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:507:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 50.259288] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:506:DDI A/PHY A][CRTC:150:pipe A] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7>[ 50.259512] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 link rate required 1926825 available 2160000 <7>[ 50.259747] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:150:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 50.260100] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:506:DDI A/PHY A] [CRTC:150:pipe A] <7>[ 50.260287] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 623587/524288, found tu 64, data 7483046/8388608 link 498869/524288) <7>[ 50.260470] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in dpll_hw_state <7>[ 50.260632] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7>[ 50.260794] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 50.260989] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_hw_state: fracen: no, <7>[ 50.261166] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] multiplier: 225, tx_clk_div: 1. <7>[ 50.261338] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_rawhw_state: <7>[ 50.261502] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] tx: 0x10, cmn: 0x21 <7>[ 50.261655] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 50.261830] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 50.261985] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 50.262153] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 50.262316] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 50.262483] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7>[ 50.262637] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 50.262806] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_hw_state: fracen: yes, <7>[ 50.262967] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] quot: 40960, rem: 0, den: 1, <7>[ 50.263141] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 50.263303] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_rawhw_state: <7>[ 50.263476] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] tx: 0x10, cmn: 0x21 <7>[ 50.263646] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 50.263839] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 50.264013] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 50.264181] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 50.264331] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 50.264494] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 50.264669] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 432000, found 540000) <7>[ 50.264872] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in set_context_latency (expected 0, found 1) <7>[ 50.265046] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7>[ 50.265209] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:150:pipe A] releasing DPLL 0 <7>[ 50.265581] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 50.265778] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 <7>[ 50.265942] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 0, 73, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 <7>[ 50.266116] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 0, 82, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 <7>[ 50.266291] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 50.266449] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.266616] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.266796] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.266965] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 50.267139] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.267298] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.267452] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.267606] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 50.267779] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.267950] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.268117] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.268272] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 50.268440] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.268600] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.268834] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.268981] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 50.269141] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.269303] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.269460] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.269684] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200 <7>[ 50.269899] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 50.270110] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 50.270328] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 50.270552] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159 <7>[ 50.270891] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:150:pipe A] allocated DPLL 0 <7>[ 50.271176] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:150:pipe A] reserving DPLL 0 <7>[ 50.271448] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:150:pipe A] enable: yes [modeset] <7>[ 50.271745] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 50.272003] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 50.272256] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 50.272506] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 50.272774] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7>[ 50.273025] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 50.273281] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 50.273537] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 50.273801] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7>[ 50.274065] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7>[ 50.274319] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7>[ 50.274578] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7>[ 50.274843] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 50.275096] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 4, length 14 <7>[ 50.275352] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7>[ 50.275614] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7>[ 50.275860] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7>[ 50.276104] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7>[ 50.276350] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7>[ 50.276612] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7>[ 50.276873] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 1 <7>[ 50.277117] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1878, vmax: 1878, flipline: 1878, pipeline full: 0, guardband: 76 vsync start: 75, vsync end: 69 <7>[ 50.277359] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1878, vmax vtotal: 1878 <7>[ 50.277617] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7>[ 50.277871] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 50.278114] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 50.278357] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 50.278616] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 50.278877] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 50.279124] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820, min cdclk 256910 <7>[ 50.279370] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 50.279662] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 50.279930] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 50.280187] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 50.280448] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 50.280702] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: fracen: yes, <7>[ 50.280954] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] quot: 40960, rem: 0, den: 1, <7>[ 50.281197] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 50.281458] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state: <7>[ 50.281710] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21 <7>[ 50.281954] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 50.282194] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 50.282453] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 50.282700] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 50.282942] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 50.283183] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 50.283444] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 50.283692] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 50.283936] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.284179] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.284436] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.284685] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 50.284926] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 50.285167] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.285420] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.285663] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.285906] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 50.286148] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 50.286406] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:565] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 50.286664] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 50.286910] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 50.287157] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 2A] fb: [NOFB], visible: no <7>[ 50.287415] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 3A] fb: [NOFB], visible: no <7>[ 50.287668] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:124:plane 4A] fb: [NOFB], visible: no <7>[ 50.287914] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:134:plane 5A] fb: [NOFB], visible: no <7>[ 50.288156] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:144:cursor A] fb: [NOFB], visible: no <7>[ 50.296954] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7>[ 50.299287] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 50.299573] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 50.299742] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 50.299904] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 50.300079] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 50.300256] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 50.300475] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 50.300678] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 50.300885] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 50.301090] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 50.301262] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 50.301433] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 50.301598] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 50.301763] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 50.301927] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 50.302105] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 50.302276] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 50.302444] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 50.302610] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 50.302780] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 50.302942] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 50.303101] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 50.303267] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 50.303447] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 50.303594] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 50.303734] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 50.303873] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 50.304029] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 50.304171] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 50.304313] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 50.304452] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 50.304589] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 50.304732] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 50.304871] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 50.305031] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 50.305171] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <6>[ 50.308826] i915 0000:00:02.0: [drm] GT1: Loaded GSC firmware i915/mtl_gsc_1.bin (cv1.0, r102.1.15.1926, svn 1) <6>[ 50.310627] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 50.311452] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <6>[ 50.312032] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 <6>[ 50.312554] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <7>[ 50.329553] i915 0000:00:02.0: [drm:intel_huc_wait_for_auth_complete [i915]] GT1: HuC: auth took 0ms, freq = 1250MHz -> 1250MHz vs 1300MHz, status = 0x00116C68, count = 0, ret = 0 <6>[ 50.329783] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for all workloads <7>[ 50.499188] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:507:eDP-1] set backlight PWM = 0 <7>[ 50.500491] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7>[ 50.509019] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turn panel power off <7>[ 50.509004] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000 <7>[ 50.509641] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 50.509640] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:506:DDI A/PHY A] - short <7>[ 50.510114] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 50.562007] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7>[ 50.562631] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:506:DDI A/PHY A] - long <7>[ 50.563209] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7>[ 50.568577] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 50.570625] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:150:pipe A] <7>[ 50.570691] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:506:DDI A/PHY A] <7>[ 50.571449] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:506:DDI A/PHY A] <7>[ 50.572625] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7>[ 50.573212] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7>[ 50.573880] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:34:plane 1A] <7>[ 50.574201] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0xffff0072 0x13421c72) <7>[ 50.574452] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:506:DDI A/PHY A] <7>[ 50.574663] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:515:DDI B/PHY B] <7>[ 50.574851] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:517:DP-MST A] <7>[ 50.575003] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:518:DP-MST B] <7>[ 50.575152] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:519:DP-MST C] <7>[ 50.575300] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:520:DP-MST D] <7>[ 50.575475] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:533:DDI TC1/PHY TC1] <7>[ 50.575624] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:535:DP-MST A] <7>[ 50.575766] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:536:DP-MST B] <7>[ 50.575913] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:537:DP-MST C] <7>[ 50.576054] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:538:DP-MST D] <7>[ 50.576195] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:542:DDI TC2/PHY TC2] <7>[ 50.576336] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:546:DDI TC3/PHY TC3] <7>[ 50.576503] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:548:DP-MST A] <7>[ 50.576651] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:549:DP-MST B] <7>[ 50.576795] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:550:DP-MST C] <7>[ 50.576943] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:551:DP-MST D] <7>[ 50.577086] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:555:DDI TC4/PHY TC4] <7>[ 50.577226] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:557:DP-MST A] <7>[ 50.577392] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:558:DP-MST B] <7>[ 50.577536] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:559:DP-MST C] <7>[ 50.577677] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:560:DP-MST D] <7>[ 50.577930] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 50.579340] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:150:pipe A] <7>[ 50.579791] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7>[ 50.582316] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turn panel power on <7>[ 50.582497] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 wait for panel power cycle (487 ms remaining) <7>[ 50.795568] i915 0000:00:02.0: [drm:gsc_work [i915]] GT1: GSC Proxy initialized <7>[ 51.063861] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7>[ 51.087655] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 51.088335] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 51.088962] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 51.120076] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7>[ 51.120720] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:506:DDI A/PHY A] - long <7>[ 51.121303] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20 <7>[ 51.121968] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:506:DDI A/PHY A] <7>[ 51.277469] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.277433] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.277440] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.277445] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.295861] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 51.296923] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turning VDD on <7>[ 51.297609] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 51.300736] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 51.301918] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 51.302555] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07 <7>[ 51.303711] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 51.304592] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 51.305575] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 51.305733] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7>[ 51.307162] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 51.307299] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7>[ 51.307943] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7>[ 51.308263] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7>[ 51.308407] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7>[ 51.308652] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:507:eDP-1] set backlight PWM = 192000 <7>[ 51.319461] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2 <7>[ 51.321255] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:507:eDP-1] <7>[ 51.321513] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:150:pipe A] <7>[ 51.323144] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 51.324725] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0x2000071 0x13421c72) <6>[ 51.325382] Console: switching to colour frame buffer device 180x56 <7>[ 51.325345] i915 0000:00:02.0: [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=9600/192000 <7>[ 51.326041] i915 0000:00:02.0: [drm:intel_panel_actually_set_backlight [i915]] [CONNECTOR:507:eDP-1] set backlight level = 13892 <6>[ 51.343199] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7>[ 51.343208] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 14 <7>[ 51.343294] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 51.343313] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 51.343420] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: C0 <7>[ 51.343573] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7>[ 51.343722] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: yes <7>[ 51.343804] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] <7>[ 51.343867] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: yes <7>[ 51.343817] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1] <7>[ 51.344027] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7>[ 51.344219] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7>[ 51.344384] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: yes <7>[ 51.344541] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7>[ 51.344693] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7>[ 51.344841] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7>[ 51.344935] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 51.344999] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7>[ 51.345143] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7>[ 51.345288] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7>[ 51.345435] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7>[ 51.345432] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 51.345583] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: no <7>[ 51.345637] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 51.345733] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7>[ 51.345836] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 51.345875] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7>[ 51.346039] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7>[ 51.346151] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 51.346156] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor <7>[ 51.346164] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0 <7>[ 51.346185] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7>[ 51.346189] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: no <7>[ 51.346328] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: yes <7>[ 51.346382] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 51.346471] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 38400 kHz <7>[ 51.346571] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 51.347487] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes: <7>[ 51.347494] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 51.347498] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] <7>[ 51.347441] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7>[ 51.347501] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:516:DP-1] <7>[ 51.347606] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D <7>[ 51.347954] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C <7>[ 51.348155] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B <7>[ 51.348519] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x7d55 rev=0x08 platform=METEORLAKE (subplatform=0x0) gen=12 <7>[ 51.348651] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 12.71 <7>[ 51.348778] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 13 <7>[ 51.348929] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: B0 <7>[ 51.349053] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: C0 <7>[ 51.349175] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 0 <7>[ 51.349292] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x41 <7>[ 51.349407] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x211000 <7>[ 51.349522] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: METEORLAKE <7>[ 51.349635] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7>[ 51.349748] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7>[ 51.349875] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 46 <7>[ 51.349991] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7>[ 51.350105] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7>[ 51.350219] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7>[ 51.350331] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7>[ 51.350443] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7>[ 51.350555] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7>[ 51.350668] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7>[ 51.350781] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7>[ 51.350917] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7>[ 51.351028] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: yes <7>[ 51.351138] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: yes <7>[ 51.351248] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7>[ 51.351360] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7>[ 51.351471] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7>[ 51.351583] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: yes <7>[ 51.351694] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: yes <7>[ 51.351814] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7>[ 51.351928] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7>[ 51.352040] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: no <7>[ 51.352152] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7>[ 51.352263] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: yes <7>[ 51.352375] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] disconnected <7>[ 51.352380] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] <7>[ 51.352374] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7>[ 51.352383] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1] <7>[ 51.352483] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7>[ 51.352595] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: yes <7>[ 51.352707] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: yes <7>[ 51.352828] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: yes <7>[ 51.352940] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7>[ 51.353050] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: yes <7>[ 51.353160] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7>[ 51.353272] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7>[ 51.353383] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7>[ 51.353492] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7>[ 51.353601] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: yes <7>[ 51.353710] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: no <7>[ 51.353832] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7>[ 51.353945] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7>[ 51.354055] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7>[ 51.354165] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7>[ 51.354273] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7>[ 51.354382] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 400003 <7>[ 51.354490] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 8 <7>[ 51.354601] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: geometry dss mask=00000000,000000ff <7>[ 51.354713] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: compute dss mask=00000000,000000ff <7>[ 51.354864] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 128 <7>[ 51.354998] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 16 <7>[ 51.355110] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7>[ 51.355219] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7>[ 51.355330] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: no <7>[ 51.355441] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 4041400 <7>[ 51.355551] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 8 <7>[ 51.355661] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: geometry dss mask=00000000,0000ff00 <7>[ 51.355787] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: compute dss mask=00000000,0000ff00 <7>[ 51.355904] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 128 <7>[ 51.356016] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 16 <7>[ 51.356126] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7>[ 51.356236] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7>[ 51.356345] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: no <6>[ 51.356452] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6>[ 51.356453] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6>[ 51.356453] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7>[ 51.356580] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected <7>[ 51.356584] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] <7>[ 51.356588] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:534:DP-2] <7>[ 51.356994] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 51.357262] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected <7>[ 51.357266] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:HDMI-A-2] <7>[ 51.357270] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:543:HDMI-A-2] <7>[ 51.357605] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7>[ 51.361845] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:HDMI-A-2] disconnected <7>[ 51.361849] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:547:DP-3] <7>[ 51.361852] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:547:DP-3] <7>[ 51.362105] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 51.362310] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:547:DP-3] disconnected <7>[ 51.362313] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:556:DP-4] <7>[ 51.362316] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:556:DP-4] <7>[ 51.362563] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 51.362795] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:556:DP-4] disconnected <7>[ 51.362798] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] enabled? yes <7>[ 51.362801] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:516:DP-1] enabled? no <7>[ 51.362803] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:528:HDMI-A-1] enabled? no <7>[ 51.362805] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:DP-2] enabled? no <7>[ 51.362807] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:HDMI-A-2] enabled? no <7>[ 51.362809] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:547:DP-3] enabled? no <7>[ 51.362811] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:556:DP-4] enabled? no <7>[ 51.362902] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 51.362917] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] found preferred mode: 2880x1800 <7>[ 51.362920] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 51.362944] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 2880x1800 set (0,0) <7>[ 51.375527] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 51.397280] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 51.397293] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 51.397666] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] <7>[ 51.397678] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1] <7>[ 51.398595] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 51.399104] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 51.399299] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 51.399479] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 51.399756] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 51.399761] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor <7>[ 51.399768] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0 <7>[ 51.399794] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: no <7>[ 51.400001] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 51.400180] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 51.401206] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes: <7>[ 51.401216] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 51.401221] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] <7>[ 51.401225] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:516:DP-1] <7>[ 51.405437] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] disconnected <7>[ 51.405443] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] <7>[ 51.405448] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1] <7>[ 51.409649] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected <7>[ 51.409655] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] <7>[ 51.409658] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:534:DP-2] <7>[ 51.410131] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected <7>[ 51.410136] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:HDMI-A-2] <7>[ 51.410140] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:543:HDMI-A-2] <7>[ 51.414474] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:HDMI-A-2] disconnected <7>[ 51.414480] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:547:DP-3] <7>[ 51.414484] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:547:DP-3] <7>[ 51.414871] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:547:DP-3] disconnected <7>[ 51.414876] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:556:DP-4] <7>[ 51.414879] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:556:DP-4] <7>[ 51.415219] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:556:DP-4] disconnected <7>[ 51.415223] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] enabled? yes <7>[ 51.415227] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:516:DP-1] enabled? no <7>[ 51.415230] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:528:HDMI-A-1] enabled? no <7>[ 51.415232] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:DP-2] enabled? no <7>[ 51.415235] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:HDMI-A-2] enabled? no <7>[ 51.415238] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:547:DP-3] enabled? no <7>[ 51.415240] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:556:DP-4] enabled? no <7>[ 51.415363] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 51.415381] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] found preferred mode: 2880x1800 <7>[ 51.415384] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 51.415419] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 2880x1800 set (0,0) <7>[ 51.419956] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 51.424616] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 51.430855] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c] <7>[ 51.464436] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 51.464555] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 51.466949] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509 <7>[ 51.497421] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 51.497494] [IGT] i915_module_load: finished subtest load, SUCCESS <7>[ 51.497702] [IGT] i915_module_load: exiting, ret=0 <7>[ 51.541003] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 52.407579] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 52.407650] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 52.408399] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 52.408564] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4 <7>[ 53.922913] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turning VDD off <7>[ 53.923896] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 <7>[ 53.924313] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 53.925212] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 53.925695] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02