<5>[ 0.000000] Linux version 6.19.0-rc7-CI_DRM_17892-ge81ccbb3ef7a+ (kbuild2@gfx-ci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Tue Jan 27 04:55:48 UTC 2026 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] Hygon HygonGenuine <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] zhaoxin Shanghai <6>[ 0.000000] x86/tme: not enabled by BIOS <4>[ 0.000000] x86/CPU: Running old microcode <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000060a39fff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000060a3a000-0x0000000063db1fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000063db2000-0x0000000063ed6fff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x0000000063ed7000-0x0000000063ffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x0000000063fff000-0x0000000063ffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000064000000-0x00000000787fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000000ffffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x63ffe000 ACPI 2.0=0x63ffe014 TPMFinalLog=0x63e0c000 SMBIOS=0x60b11000 MEMATTR=0x5bd90698 ESRT=0x5bda2798 MOKvar=0x60c46000 TPMEventLog=0x63f0e018 <6>[ 0.000000] efi: Remove mem307: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem309: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.6 present. <6>[ 0.000000] DMI: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024 <6>[ 0.000000] DMI: Memory slots populated: 8/8 <6>[ 0.000000] tsc: Detected 3400.000 MHz processor <6>[ 0.000000] tsc: Detected 3379.200 MHz TSC <7>[ 0.000011] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000012] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000016] last_pfn = 0x880000 max_arch_pfn = 0x400000000 <6>[ 0.000020] MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs <6>[ 0.000022] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.000608] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000610] last_pfn = 0x64000 max_arch_pfn = 0x400000000 <6>[ 0.005027] esrt: Reserving ESRT space from 0x000000005bda2798 to 0x000000005bda28c0. <7>[ 0.005039] e820: update [mem 0x5bda2000-0x5bda2fff] usable ==> reserved <6>[ 0.005074] Using GB pages for direct mapping <6>[ 0.005900] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes <6>[ 0.005902] printk: early log buf free: 258704(98%) <6>[ 0.005904] Secure boot disabled <6>[ 0.005906] ACPI: Early table checksum verification disabled <6>[ 0.005911] ACPI: RSDP 0x0000000063FFE014 000024 (v02 INTEL ) <6>[ 0.005916] ACPI: XSDT 0x0000000063F15228 000184 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005921] ACPI: FACP 0x0000000063FDC000 000114 (v06 INTEL MTL 00000002 01000013) <6>[ 0.005925] ACPI: DSDT 0x0000000063F55000 083F8A (v02 INTEL MTL 00000002 01000013) <6>[ 0.005927] ACPI: FACS 0x0000000063DF2000 000040 <6>[ 0.005928] ACPI: SSDT 0x0000000063FFC000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.005930] ACPI: SSDT 0x0000000063FFB000 00070D (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.005931] ACPI: SSDT 0x0000000063FFA000 0005E4 (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.005933] ACPI: SSDT 0x0000000063FF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.005935] ACPI: SSDT 0x0000000063FF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.005936] ACPI: SSDT 0x0000000063FF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.005938] ACPI: SSDT 0x0000000063FF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.005939] ACPI: SSDT 0x0000000063FF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.005941] ACPI: SSDT 0x0000000063FF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.005943] ACPI: SSDT 0x0000000063FED000 003BC8 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.005944] ACPI: DTPR 0x0000000063FEC000 000098 (v01 00000000 00000000) <6>[ 0.005946] ACPI: SSDT 0x0000000063FEB000 000D03 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.005947] ACPI: SSDT 0x0000000063FE8000 002494 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.005949] ACPI: SSDT 0x0000000063FDE000 009AB7 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.005950] ACPI: SSDT 0x0000000063FDD000 0000F9 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.005952] ACPI: HPET 0x0000000063FDB000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005954] ACPI: APIC 0x0000000063FDA000 000358 (v05 INTEL MTL 00000002 01000013) <6>[ 0.005955] ACPI: MCFG 0x0000000063FD9000 00003C (v01 INTEL MTL 00000002 01000013) <6>[ 0.005957] ACPI: SSDT 0x0000000063F45000 00FCEF (v02 INTEL MtlP_Rvp 00001000 INTL 20210930) <6>[ 0.005958] ACPI: SSDT 0x0000000063F43000 00147F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.005960] ACPI: SSDT 0x0000000063F3E000 00389C (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.005961] ACPI: SSDT 0x0000000063F38000 00535A (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.005963] ACPI: SSDT 0x0000000063FFD000 00060E (v02 INTEL Tpm2Tabl 00001000 INTL 20210930) <6>[ 0.005964] ACPI: TPM2 0x0000000063F37000 00004C (v04 INTEL MTL 00000002 01000013) <6>[ 0.005966] ACPI: LPIT 0x0000000063F36000 0000CC (v01 INTEL MTL 00000002 01000013) <6>[ 0.005967] ACPI: WSMT 0x0000000063F35000 000028 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005969] ACPI: SSDT 0x0000000063F34000 000CA6 (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.005970] ACPI: SSDT 0x0000000063F2E000 00587D (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.005972] ACPI: DBGP 0x0000000063F2D000 000034 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005973] ACPI: DBG2 0x0000000063F2C000 000054 (v00 INTEL MTL 00000002 01000013) <6>[ 0.005975] ACPI: NHLT 0x0000000063F2B000 00098B (v00 INTEL MTL 00000002 01000013) <6>[ 0.005976] ACPI: SSDT 0x0000000063F29000 001191 (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.005978] ACPI: SSDT 0x0000000063F23000 005CAE (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.005979] ACPI: ECDT 0x0000000063F22000 000069 (v01 MTL 00000002 01000013) <6>[ 0.005981] ACPI: DMAR 0x0000000063F21000 0000A8 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005982] ACPI: FPDT 0x0000000063F20000 000044 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005984] ACPI: SSDT 0x0000000063F1E000 001015 (v02 INTEL xh_mtlp3 00000000 INTL 20210930) <6>[ 0.005985] ACPI: SSDT 0x0000000063F1B000 00281A (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.005987] ACPI: SSDT 0x0000000063F18000 0028D3 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.005989] ACPI: SSDT 0x0000000063F16000 0011A0 (v02 INTEL St00Ssdt 00001000 INTL 20210930) <6>[ 0.005990] ACPI: ASF! 0x0000000063F42000 000074 (v32 INTEL MTL 00000002 01000013) <6>[ 0.005992] ACPI: PHAT 0x0000000063F14000 000810 (v01 INTEL MTL 00000005 MSFT 0100000D) <6>[ 0.005993] ACPI: BGRT 0x0000000063F13000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005994] ACPI: Reserving FACP table memory at [mem 0x63fdc000-0x63fdc113] <6>[ 0.005996] ACPI: Reserving DSDT table memory at [mem 0x63f55000-0x63fd8f89] <6>[ 0.005996] ACPI: Reserving FACS table memory at [mem 0x63df2000-0x63df203f] <6>[ 0.005997] ACPI: Reserving SSDT table memory at [mem 0x63ffc000-0x63ffc38b] <6>[ 0.005997] ACPI: Reserving SSDT table memory at [mem 0x63ffb000-0x63ffb70c] <6>[ 0.005997] ACPI: Reserving SSDT table memory at [mem 0x63ffa000-0x63ffa5e3] <6>[ 0.005998] ACPI: Reserving SSDT table memory at [mem 0x63ff9000-0x63ff91aa] <6>[ 0.005998] ACPI: Reserving SSDT table memory at [mem 0x63ff8000-0x63ff8393] <6>[ 0.005999] ACPI: Reserving SSDT table memory at [mem 0x63ff6000-0x63ff7bae] <6>[ 0.005999] ACPI: Reserving SSDT table memory at [mem 0x63ff4000-0x63ff561f] <6>[ 0.005999] ACPI: Reserving SSDT table memory at [mem 0x63ff2000-0x63ff3348] <6>[ 0.006000] ACPI: Reserving SSDT table memory at [mem 0x63ff1000-0x63ff1fba] <6>[ 0.006000] ACPI: Reserving SSDT table memory at [mem 0x63fed000-0x63ff0bc7] <6>[ 0.006000] ACPI: Reserving DTPR table memory at [mem 0x63fec000-0x63fec097] <6>[ 0.006001] ACPI: Reserving SSDT table memory at [mem 0x63feb000-0x63febd02] <6>[ 0.006001] ACPI: Reserving SSDT table memory at [mem 0x63fe8000-0x63fea493] <6>[ 0.006001] ACPI: Reserving SSDT table memory at [mem 0x63fde000-0x63fe7ab6] <6>[ 0.006002] ACPI: Reserving SSDT table memory at [mem 0x63fdd000-0x63fdd0f8] <6>[ 0.006002] ACPI: Reserving HPET table memory at [mem 0x63fdb000-0x63fdb037] <6>[ 0.006003] ACPI: Reserving APIC table memory at [mem 0x63fda000-0x63fda357] <6>[ 0.006003] ACPI: Reserving MCFG table memory at [mem 0x63fd9000-0x63fd903b] <6>[ 0.006003] ACPI: Reserving SSDT table memory at [mem 0x63f45000-0x63f54cee] <6>[ 0.006004] ACPI: Reserving SSDT table memory at [mem 0x63f43000-0x63f4447e] <6>[ 0.006004] ACPI: Reserving SSDT table memory at [mem 0x63f3e000-0x63f4189b] <6>[ 0.006004] ACPI: Reserving SSDT table memory at [mem 0x63f38000-0x63f3d359] <6>[ 0.006005] ACPI: Reserving SSDT table memory at [mem 0x63ffd000-0x63ffd60d] <6>[ 0.006005] ACPI: Reserving TPM2 table memory at [mem 0x63f37000-0x63f3704b] <6>[ 0.006006] ACPI: Reserving LPIT table memory at [mem 0x63f36000-0x63f360cb] <6>[ 0.006006] ACPI: Reserving WSMT table memory at [mem 0x63f35000-0x63f35027] <6>[ 0.006006] ACPI: Reserving SSDT table memory at [mem 0x63f34000-0x63f34ca5] <6>[ 0.006007] ACPI: Reserving SSDT table memory at [mem 0x63f2e000-0x63f3387c] <6>[ 0.006007] ACPI: Reserving DBGP table memory at [mem 0x63f2d000-0x63f2d033] <6>[ 0.006008] ACPI: Reserving DBG2 table memory at [mem 0x63f2c000-0x63f2c053] <6>[ 0.006008] ACPI: Reserving NHLT table memory at [mem 0x63f2b000-0x63f2b98a] <6>[ 0.006008] ACPI: Reserving SSDT table memory at [mem 0x63f29000-0x63f2a190] <6>[ 0.006009] ACPI: Reserving SSDT table memory at [mem 0x63f23000-0x63f28cad] <6>[ 0.006009] ACPI: Reserving ECDT table memory at [mem 0x63f22000-0x63f22068] <6>[ 0.006009] ACPI: Reserving DMAR table memory at [mem 0x63f21000-0x63f210a7] <6>[ 0.006010] ACPI: Reserving FPDT table memory at [mem 0x63f20000-0x63f20043] <6>[ 0.006010] ACPI: Reserving SSDT table memory at [mem 0x63f1e000-0x63f1f014] <6>[ 0.006011] ACPI: Reserving SSDT table memory at [mem 0x63f1b000-0x63f1d819] <6>[ 0.006011] ACPI: Reserving SSDT table memory at [mem 0x63f18000-0x63f1a8d2] <6>[ 0.006011] ACPI: Reserving SSDT table memory at [mem 0x63f16000-0x63f1719f] <6>[ 0.006012] ACPI: Reserving ASF! table memory at [mem 0x63f42000-0x63f42073] <6>[ 0.006012] ACPI: Reserving PHAT table memory at [mem 0x63f14000-0x63f1480f] <6>[ 0.006013] ACPI: Reserving BGRT table memory at [mem 0x63f13000-0x63f13037] <6>[ 0.006111] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.006320] No NUMA configuration found <6>[ 0.006321] Faking a node at [mem 0x0000000000000000-0x000000087fffffff] <6>[ 0.006329] NODE_DATA(0) allocated [mem 0x87fb52e40-0x87fb7dfff] <6>[ 0.006486] Zone ranges: <6>[ 0.006488] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.006489] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.006490] Normal [mem 0x0000000100000000-0x000000087fffffff] <6>[ 0.006491] Device empty <6>[ 0.006491] Movable zone start for each node <6>[ 0.006492] Early memory node ranges <6>[ 0.006493] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.006493] node 0: [mem 0x0000000000100000-0x0000000060a39fff] <6>[ 0.006494] node 0: [mem 0x0000000063fff000-0x0000000063ffffff] <6>[ 0.006494] node 0: [mem 0x0000000100000000-0x000000087fffffff] <6>[ 0.006496] Initmem setup node 0 [mem 0x0000000000001000-0x000000087fffffff] <6>[ 0.006502] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.006524] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.008706] On node 0, zone DMA32: 13765 pages in unavailable ranges <6>[ 0.050747] On node 0, zone Normal: 16384 pages in unavailable ranges <6>[ 0.051220] ACPI: PM-Timer IO Port: 0x1808 <4>[ 0.051224] CPU topo: Boot CPU APIC ID not the first enumerated APIC ID: 20 != 10 <4>[ 0.051224] CPU topo: [Firmware Bug]: APIC enumeration order not specification compliant <6>[ 0.051228] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.051273] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.051275] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.051277] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.051279] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.051280] ACPI: HPET id: 0x8086a201 base: 0xfed00000 <7>[ 0.051292] e820: update [mem 0x5bd41000-0x5bd5bfff] usable ==> reserved <6>[ 0.051301] TSC deadline timer available <6>[ 0.051303] CPU topo: Max. logical packages: 1 <6>[ 0.051303] CPU topo: Max. logical dies: 1 <6>[ 0.051303] CPU topo: Max. dies per package: 1 <6>[ 0.051305] CPU topo: Max. threads per core: 2 <6>[ 0.051305] CPU topo: Num. cores per package: 16 <6>[ 0.051306] CPU topo: Num. threads per package: 22 <6>[ 0.051306] CPU topo: Allowing 22 present CPUs plus 0 hotplug CPUs <6>[ 0.051327] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.051328] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.051330] PM: hibernation: Registered nosave memory: [mem 0x5bd41000-0x5bd5bfff] <6>[ 0.051331] PM: hibernation: Registered nosave memory: [mem 0x5bda2000-0x5bda2fff] <6>[ 0.051333] PM: hibernation: Registered nosave memory: [mem 0x60a3a000-0x63ffefff] <6>[ 0.051334] PM: hibernation: Registered nosave memory: [mem 0x64000000-0xffffffff] <6>[ 0.051336] [mem 0x78800000-0xfed1ffff] available for PCI devices <6>[ 0.051337] Booting paravirtualized kernel on bare hardware <6>[ 0.051340] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.051351] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:22 nr_cpu_ids:22 nr_node_ids:1 <6>[ 0.052880] percpu: Embedded 87 pages/cpu s233472 r8192 d114688 u524288 <7>[ 0.052885] pcpu-alloc: s233472 r8192 d114688 u524288 alloc=1*2097152 <7>[ 0.052886] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 <7>[ 0.052889] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 <7>[ 0.052892] pcpu-alloc: [0] 16 17 18 19 [0] 20 21 -- -- <5>[ 0.052911] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <7>[ 0.053032] blacklisting initcall simpledrm_platform_driver_init <5>[ 0.053052] random: crng init done <6>[ 0.055863] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.057263] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.057398] software IO TLB: area num 32. <6>[ 0.068795] Fallback order for Node 0: 0 <6>[ 0.068799] Built 1 zonelists, mobility grouping on. Total pages: 8260057 <6>[ 0.068801] Policy zone: Normal <6>[ 0.068815] mem auto-init: stack:off, heap alloc:on, heap free:off <6>[ 0.068816] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.068820] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) <6>[ 0.070272] stackdepot: allocating space for 8192 stack pools via memblock <4>[ 0.112046] ********************************************************** <4>[ 0.112047] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.112047] ** ** <4>[ 0.112048] ** This system shows unhashed kernel memory addresses ** <4>[ 0.112048] ** via the console, logs, and other interfaces. This ** <4>[ 0.112048] ** might reduce the security of your system. ** <4>[ 0.112048] ** ** <4>[ 0.112049] ** If you see this message and you are not debugging ** <4>[ 0.112049] ** the kernel, report this immediately to your system ** <4>[ 0.112049] ** administrator! ** <4>[ 0.112049] ** ** <4>[ 0.112050] ** Use hash_pointers=always to force this mode off ** <4>[ 0.112050] ** ** <4>[ 0.112050] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.112050] ********************************************************** <6>[ 0.113513] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=22, Nodes=1 <6>[ 0.124076] ftrace: allocating 61100 entries in 240 pages <6>[ 0.124078] ftrace: allocated 240 pages with 4 groups <6>[ 0.125859] Dynamic Preempt: voluntary <6>[ 0.126911] Running RCU self tests <6>[ 0.126912] Running RCU synchronous self tests <6>[ 0.126913] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.126913] rcu: RCU lockdep checking is enabled. <6>[ 0.126914] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=22. <6>[ 0.126915] Trampoline variant of Tasks RCU enabled. <6>[ 0.126915] Rude variant of Tasks RCU enabled. <6>[ 0.126915] Tracing variant of Tasks RCU enabled. <6>[ 0.126916] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.126916] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=22 <6>[ 0.127039] Running RCU synchronous self tests <6>[ 0.127047] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22. <6>[ 0.127053] RCU Tasks Rude: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22. <6>[ 0.127057] RCU Tasks Trace: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22. <6>[ 0.139336] NR_IRQS: 524544, nr_irqs: 2232, preallocated irqs: 16 <6>[ 0.139902] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.140509] Console: colour dummy device 80x25 <6>[ 0.140521] printk: legacy console [tty0] enabled <6>[ 0.141697] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <6>[ 0.141705] ... MAX_LOCKDEP_SUBCLASSES: 8 <6>[ 0.141709] ... MAX_LOCK_DEPTH: 48 <6>[ 0.141713] ... MAX_LOCKDEP_KEYS: 8192 <6>[ 0.141717] ... CLASSHASH_SIZE: 4096 <6>[ 0.141720] ... MAX_LOCKDEP_ENTRIES: 524288 <6>[ 0.141724] ... MAX_LOCKDEP_CHAINS: 524288 <6>[ 0.141728] ... CHAINHASH_SIZE: 262144 <6>[ 0.141732] memory used by lock dependency info: 54145 kB <6>[ 0.141737] memory used for stack traces: 4224 kB <6>[ 0.141741] per task-struct memory footprint: 1920 bytes <6>[ 0.141810] ACPI: Core revision 20250807 <6>[ 0.142777] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 0.142834] APIC: Switch to symmetric I/O mode setup <6>[ 0.142840] DMAR: Host address width 42 <6>[ 0.142844] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 0.142885] DMAR: dmar0: reg_base_addr fc800000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0ef5e <6>[ 0.142893] DMAR: DRHD base: 0x000000fc801000 flags: 0x1 <6>[ 0.142912] DMAR: dmar1: reg_base_addr fc801000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0efde <6>[ 0.142920] DMAR: SATC flags: 0x1 <6>[ 0.142934] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc801000 IOMMU 1 <6>[ 0.142939] DMAR-IR: HPET id 0 under DRHD base 0xfc801000 <6>[ 0.142944] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 0.144636] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 0.149061] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 0.149081] Calibrating delay loop (skipped), value calculated using timer frequency.. 6758.40 BogoMIPS (lpj=3379200) <6>[ 0.149148] CPU0: Thermal monitoring enabled (TM1) <6>[ 0.149153] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 0.149359] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 0.149364] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 0.149372] process: using mwait in idle threads <6>[ 0.149379] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto <6>[ 0.149391] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 0.149398] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 0.149403] VMSCAPE: Mitigation: IBPB before exit to userspace <6>[ 0.149408] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 0.149416] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 0.149434] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 0.149440] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 0.149445] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 0.149451] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 0.149457] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 0.149463] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' <6>[ 0.149470] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 0.149475] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 0.149480] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 0.149486] x86/fpu: xstate_offset[12]: 856, xstate_sizes[12]: 24 <6>[ 0.149491] x86/fpu: Enabled xstate features 0x1a07, context size is 880 bytes, using 'compacted' format. <6>[ 0.150074] Freeing SMP alternatives memory: 56K <6>[ 0.150074] pid_max: default: 32768 minimum: 301 <6>[ 0.150074] landlock: Up and running. <6>[ 0.150074] Yama: becoming mindful. <6>[ 0.150074] AppArmor: AppArmor initialized <6>[ 0.150074] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.150074] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.150074] Running RCU synchronous self tests <6>[ 0.150074] Running RCU synchronous self tests <6>[ 0.150074] smpboot: CPU0: Intel(R) Core(TM) Ultra 7 1003H (family: 0x6, model: 0xaa, stepping: 0x4) <6>[ 0.150074] Performance Events: XSAVE Architectural LBR, PEBS fmt5+-baseline, AnyThread deprecated, Meteorlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 0.150280] core: cpu_core PMU driver: <6>[ 0.150289] ... version: 5 <6>[ 0.150293] ... bit width: 48 <6>[ 0.150297] ... generic counters: 8 <6>[ 0.150301] ... generic bitmap: 00000000000000ff <6>[ 0.150306] ... fixed-purpose counters: 4 <6>[ 0.150309] ... fixed-purpose bitmap: 000000000000000f <6>[ 0.150314] ... value mask: 0000ffffffffffff <6>[ 0.150319] ... max period: 00007fffffffffff <6>[ 0.150324] ... global_ctrl mask: 0001000f000000ff <6>[ 0.150516] signal: max sigframe size: 3632 <6>[ 0.150548] Estimated ratio of average max frequency by base frequency (times 1024): 1445 <6>[ 0.150682] rcu: Hierarchical SRCU implementation. <6>[ 0.150688] rcu: Max phase no-delay instances is 400. <6>[ 0.150862] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level <6>[ 0.153705] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 0.154686] smp: Bringing up secondary CPUs ... <6>[ 0.155121] smpboot: x86: Booting SMP configuration: <6>[ 0.155129] .... node #0, CPUs: #1 #3 #6 #8 #10 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 <6>[ 0.010035] core: cpu_atom PMU driver: <6>[ 0.010035] ... version: 5 <6>[ 0.010035] ... bit width: 48 <6>[ 0.010035] ... generic counters: 8 <6>[ 0.010035] ... generic bitmap: 00000000000000ff <6>[ 0.010035] ... fixed-purpose counters: 3 <6>[ 0.010035] ... fixed-purpose bitmap: 0000000000000007 <6>[ 0.010035] ... value mask: 0000ffffffffffff <6>[ 0.010035] ... max period: 00007fffffffffff <6>[ 0.010035] ... global_ctrl mask: 00000007000000ff <5>[ 0.169532] #2 #4 #5 #7 #9 #11 <6>[ 0.176159] smp: Brought up 1 node, 22 CPUs <6>[ 0.176163] smpboot: Total of 22 processors activated (148684.80 BogoMIPS) <6>[ 0.179311] Memory: 32229564K/33040228K available (25578K kernel code, 5617K rwdata, 9656K rodata, 5720K init, 68168K bss, 780060K reserved, 0K cma-reserved) <6>[ 0.183339] devtmpfs: initialized <6>[ 0.183458] x86/mm: Memory block size: 128MB <6>[ 0.208954] ACPI: PM: Registering ACPI NVS region [mem 0x63db2000-0x63ed6fff] (1200128 bytes) <6>[ 0.209869] Running RCU synchronous self tests <6>[ 0.209887] Running RCU synchronous self tests <6>[ 0.210109] Running RCU Tasks wait API self tests <6>[ 0.210118] Running RCU Tasks Rude wait API self tests <6>[ 0.210118] Running RCU Tasks Trace wait API self tests <6>[ 0.223100] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.223315] posixtimers hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 0.223607] futex hash table entries: 8192 (1048576 bytes on 1 NUMA nodes, total 1024 KiB, linear). <6>[ 0.224944] PM: RTC time: 13:19:12, date: 2026-01-27 <6>[ 0.225831] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.227172] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.227584] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.227972] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.228032] audit: initializing netlink subsys (disabled) <5>[ 0.228109] audit: type=2000 audit(1769519952.079:1): state=initialized audit_enabled=0 res=1 <6>[ 0.228885] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.228887] thermal_sys: Registered thermal governor 'bang_bang' <6>[ 0.228893] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.228898] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.228903] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.228953] cpuidle: using governor ladder <6>[ 0.228953] cpuidle: using governor menu <6>[ 0.229181] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 0.229676] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 0.229706] PCI: Using configuration type 1 for base access <6>[ 0.230181] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.231116] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.231118] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 0.231124] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.231130] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.234455] raid6: skipped pq benchmark and selected avx2x4 <6>[ 0.234465] raid6: using avx2x2 recovery algorithm <6>[ 0.235103] fbcon: Taking over console <6>[ 0.235295] ACPI: Added _OSI(Module Device) <6>[ 0.235300] ACPI: Added _OSI(Processor Device) <6>[ 0.235305] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 0.242086] Callback from call_rcu_tasks_trace() invoked. <6>[ 0.909420] ACPI: 28 ACPI AML tables successfully acquired and loaded <6>[ 0.920222] ACPI: EC: EC started <6>[ 0.920232] ACPI: EC: interrupt blocked <6>[ 0.922939] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 0.922945] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 0.960081] Callback from call_rcu_tasks() invoked. <6>[ 1.221787] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.221804] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.316333] ACPI: Interpreter enabled <6>[ 1.316542] ACPI: PM: (supports S0 S4 S5) <6>[ 1.316551] ACPI: Using IOAPIC for interrupt routing <6>[ 1.328375] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 1.328392] PCI: Ignoring E820 reservations for host bridge windows <6>[ 1.376743] ACPI: Enabled 10 GPEs in block 00 to 7F <6>[ 1.376783] ACPI: Enabled 8 GPEs in block 80 to DF <6>[ 1.478966] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 1.799543] ACPI: \_SB_.PC00.RP01.PXP_: New power resource <6>[ 1.832823] ACPI: \_SB_.PC00.RP06.PXP_: New power resource <6>[ 1.843884] ACPI: \_SB_.PC00.RP07.PXP_: New power resource <6>[ 1.858948] ACPI: \_SB_.PC00.RP09.PXP_: New power resource <6>[ 1.865377] ACPI: \_SB_.PC00.RP10.PXP_: New power resource <6>[ 1.872824] ACPI: \_SB_.PC00.RP11.PXP_: New power resource <6>[ 1.880310] ACPI: \_SB_.PC00.RP12.PXP_: New power resource <6>[ 2.105613] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 2.105967] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 2.106284] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 2.231188] ACPI: \_TZ_.FN00: New power resource <6>[ 2.232267] ACPI: \_TZ_.FN01: New power resource <6>[ 2.233357] ACPI: \_TZ_.FN02: New power resource <6>[ 2.234425] ACPI: \_TZ_.FN03: New power resource <6>[ 2.235498] ACPI: \_TZ_.FN04: New power resource <6>[ 2.241510] ACPI: \PIN_: New power resource <6>[ 2.247032] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 2.247063] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] <6>[ 2.251099] acpi PNP0A08:00: _OSC: platform does not support [AER] <6>[ 2.259435] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME PCIeCapability LTR DPC] <6>[ 2.282452] PCI host bridge to bus 0000:00 <6>[ 2.282514] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 2.282531] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 2.282545] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 2.282561] pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff window] <6>[ 2.282576] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x3ffbfffffff window] <6>[ 2.282594] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 2.300044] pci 0000:00:00.0: [8086:7d01] type 00 class 0x060000 conventional PCI endpoint <6>[ 2.301472] pci 0000:00:02.0: [8086:7d55] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint <6>[ 2.301521] pci 0000:00:02.0: BAR 0 [mem 0x5018000000-0x5018ffffff 64bit pref] <6>[ 2.301536] pci 0000:00:02.0: BAR 2 [mem 0x4000000000-0x400fffffff 64bit pref] <6>[ 2.301590] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics <6>[ 2.301605] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 2.301667] pci 0000:00:02.0: PME# supported from D0 D3hot <6>[ 2.301757] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x00ffffff 64bit pref] <6>[ 2.301770] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x06ffffff 64bit pref]: contains BAR 0 for 7 VFs <6>[ 2.305127] pci 0000:00:04.0: [8086:7d03] type 00 class 0x118000 conventional PCI endpoint <6>[ 2.305182] pci 0000:00:04.0: BAR 0 [mem 0x501a280000-0x501a29ffff 64bit] <6>[ 2.307650] pci 0000:00:05.0: [8086:7d19] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint <6>[ 2.307689] pci 0000:00:05.0: BAR 0 [mem 0x5019000000-0x5019ffffff 64bit] <6>[ 2.307708] pci 0000:00:05.0: enabling Extended Tags <6>[ 2.309724] pci 0000:00:06.0: [8086:7ecb] type 01 class 0x060400 PCIe Root Port <6>[ 2.309765] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 2.309782] pci 0000:00:06.0: bridge window [mem 0x8c000000-0x8c0fffff] <6>[ 2.309930] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold <6>[ 2.310036] pci 0000:00:06.0: PTM enabled (root), 4ns granularity <6>[ 2.319984] pci 0000:00:07.0: [8086:7ec6] type 01 class 0x060400 PCIe Root Port <6>[ 2.320026] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 2.320042] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff] <6>[ 2.320063] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 2.320180] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 2.320266] pci 0000:00:07.0: PTM enabled (root), 4ns granularity <6>[ 2.329131] pci 0000:00:07.3: [8086:7ec7] type 01 class 0x060400 PCIe Root Port <6>[ 2.329178] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 2.329193] pci 0000:00:07.3: bridge window [mem 0x80000000-0x85ffffff] <6>[ 2.329214] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 2.329332] pci 0000:00:07.3: PME# supported from D0 D3hot D3cold <6>[ 2.329418] pci 0000:00:07.3: PTM enabled (root), 4ns granularity <6>[ 2.338287] pci 0000:00:08.0: [8086:7e4c] type 00 class 0x088000 conventional PCI endpoint <6>[ 2.338348] pci 0000:00:08.0: BAR 0 [mem 0x501a2e3000-0x501a2e3fff 64bit] <6>[ 2.339173] pci 0000:00:0a.0: [8086:7d0d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint <6>[ 2.339212] pci 0000:00:0a.0: BAR 0 [mem 0x501a240000-0x501a27ffff 64bit] <6>[ 2.339230] pci 0000:00:0a.0: enabling Extended Tags <6>[ 2.339629] pci 0000:00:0b.0: [8086:7d1d] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint <6>[ 2.339671] pci 0000:00:0b.0: BAR 0 [mem 0x5010000000-0x5017ffffff 64bit] <6>[ 2.339685] pci 0000:00:0b.0: BAR 4 [mem 0x501a2e2000-0x501a2e2fff 64bit] <6>[ 2.340987] pci 0000:00:0d.0: [8086:7ec0] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.341041] pci 0000:00:0d.0: BAR 0 [mem 0x501a2c0000-0x501a2cffff 64bit] <6>[ 2.341132] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 2.344824] pci 0000:00:0d.3: [8086:7ec3] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.344917] pci 0000:00:0d.3: BAR 0 [mem 0x501a200000-0x501a23ffff 64bit] <6>[ 2.344931] pci 0000:00:0d.3: BAR 2 [mem 0x501a2e1000-0x501a2e1fff 64bit] <6>[ 2.344999] pci 0000:00:0d.3: supports D1 D2 <6>[ 2.345008] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.347652] pci 0000:00:12.0: [8086:7e45] type 00 class 0x070000 conventional PCI endpoint <6>[ 2.347702] pci 0000:00:12.0: BAR 0 [mem 0x501a2b0000-0x501a2bffff 64bit] <6>[ 2.347771] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 2.353494] pci 0000:00:14.0: [8086:7e7d] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.353545] pci 0000:00:14.0: BAR 0 [mem 0x501a2a0000-0x501a2affff 64bit] <6>[ 2.353618] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 2.357718] pci 0000:00:14.2: [8086:7e7f] type 00 class 0x050000 conventional PCI endpoint <6>[ 2.357780] pci 0000:00:14.2: BAR 0 [mem 0x501a2d4000-0x501a2d7fff 64bit] <6>[ 2.357796] pci 0000:00:14.2: BAR 2 [mem 0x501a2e0000-0x501a2e0fff 64bit] <6>[ 2.358287] pci 0000:00:15.0: [8086:7e78] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.358381] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.370589] pci 0000:00:15.1: [8086:7e79] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.371080] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.383456] pci 0000:00:15.2: [8086:7e7a] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.383528] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.396466] pci 0000:00:15.3: [8086:7e7b] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.396532] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.409610] pci 0000:00:16.0: [8086:7e70] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.409674] pci 0000:00:16.0: BAR 0 [mem 0x501a2db000-0x501a2dbfff 64bit] <6>[ 2.409754] pci 0000:00:16.0: PME# supported from D3hot <6>[ 2.414652] pci 0000:00:16.3: [8086:7e73] type 00 class 0x070002 conventional PCI endpoint <6>[ 2.414705] pci 0000:00:16.3: BAR 0 [io 0x3020-0x3027] <6>[ 2.414716] pci 0000:00:16.3: BAR 1 [mem 0x8c121000-0x8c121fff] <6>[ 2.415112] pci 0000:00:19.0: [8086:7e50] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.415189] pci 0000:00:19.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.425869] pci 0000:00:19.1: [8086:7e51] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.425937] pci 0000:00:19.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.438506] pci 0000:00:1f.0: [8086:7e02] type 00 class 0x060100 conventional PCI endpoint <6>[ 2.441075] pci 0000:00:1f.3: [8086:7e28] type 00 class 0x040100 conventional PCI endpoint <6>[ 2.441200] pci 0000:00:1f.3: BAR 0 [mem 0x501a2d0000-0x501a2d3fff 64bit] <6>[ 2.441220] pci 0000:00:1f.3: BAR 4 [mem 0x501a000000-0x501a1fffff 64bit] <6>[ 2.441352] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 2.442193] pci 0000:00:1f.4: [8086:7e22] type 00 class 0x0c0500 conventional PCI endpoint <6>[ 2.442254] pci 0000:00:1f.4: BAR 0 [mem 0x501a2d8000-0x501a2d80ff 64bit] <6>[ 2.442271] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] <6>[ 2.444603] pci 0000:00:1f.5: [8086:7e23] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.444717] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] <6>[ 2.445109] pci 0000:00:1f.6: [8086:550a] type 00 class 0x020000 conventional PCI endpoint <6>[ 2.445198] pci 0000:00:1f.6: BAR 0 [mem 0x8c100000-0x8c11ffff] <6>[ 2.445295] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold <6>[ 2.448303] pci 0000:01:00.0: [15b7:501e] type 00 class 0x010802 PCIe Endpoint <6>[ 2.448471] pci 0000:01:00.0: BAR 0 [mem 0x8c000000-0x8c003fff 64bit] <6>[ 2.450303] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 2.450617] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 2.450924] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 2.878468] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1) <6>[ 2.878486] Low-power S0 idle used by default for system suspend <6>[ 2.998035] ACPI: EC: interrupt unblocked <6>[ 2.998051] ACPI: EC: event unblocked <6>[ 2.998076] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 2.998089] ACPI: EC: GPE=0x6e <6>[ 2.998100] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 2.998120] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 2.999837] iommu: Default domain type: Translated <6>[ 2.999837] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 3.001961] SCSI subsystem initialized <7>[ 3.002418] libata version 3.00 loaded. <6>[ 3.003208] ACPI: bus type USB registered <6>[ 3.003346] usbcore: registered new interface driver usbfs <6>[ 3.003413] usbcore: registered new interface driver hub <6>[ 3.003492] usbcore: registered new device driver usb <6>[ 3.003678] pps_core: LinuxPPS API ver. 1 registered <6>[ 3.003684] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 3.003708] PTP clock support registered <6>[ 3.004094] EDAC MC: Ver: 3.0.0 <6>[ 3.005080] efivars: Registered efivars operations <6>[ 3.006726] NetLabel: Initializing <6>[ 3.006732] NetLabel: domain hash size = 128 <6>[ 3.006736] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO <6>[ 3.006821] NetLabel: unlabeled traffic allowed by default <6>[ 3.006840] mctp: management component transport protocol core <6>[ 3.006846] NET: Registered PF_MCTP protocol family <6>[ 3.006906] PCI: Using ACPI for IRQ routing <7>[ 3.019657] PCI: pci_cache_line_size set to 64 bytes <6>[ 3.019842] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window <7>[ 3.020027] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 3.020037] e820: reserve RAM buffer [mem 0x5bd41000-0x5bffffff] <7>[ 3.020041] e820: reserve RAM buffer [mem 0x5bda2000-0x5bffffff] <7>[ 3.020043] e820: reserve RAM buffer [mem 0x60a3a000-0x63ffffff] <6>[ 3.020363] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 3.020363] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 3.020363] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 3.020363] vgaarb: loaded <6>[ 3.029420] clocksource: Switched to clocksource tsc-early <5>[ 3.037529] VFS: Disk quotas dquot_6.6.0 <6>[ 3.037560] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 3.038877] AppArmor: AppArmor Filesystem Enabled <6>[ 3.039089] pnp: PnP ACPI init <6>[ 3.040135] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 3.040148] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 3.040762] system 00:01: [io 0x1854-0x1857] has been reserved <6>[ 3.042352] system 00:03: [io 0x06a4] has been reserved <6>[ 3.042363] system 00:03: [io 0x06a0] has been reserved <4>[ 3.066462] pnp 00:04: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] <4>[ 3.066486] pnp 00:04: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] <6>[ 3.066753] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 3.066771] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 3.066792] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved <6>[ 3.066811] system 00:04: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 3.066829] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 3.066845] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 3.075252] system 00:05: [io 0x2000-0x20fe] has been reserved <4>[ 3.077022] pnp 00:07: disabling [mem 0x00000000-0x0009cfff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] <6>[ 3.082075] pnp: PnP ACPI: found 8 devices <6>[ 3.100355] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 3.101043] NET: Registered PF_INET protocol family <6>[ 3.101336] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 3.105204] tcp_listen_portaddr_hash hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 3.105354] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 3.105577] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 3.106683] TCP bind hash table entries: 65536 (order: 12, 9437184 bytes, vmalloc hugepage) <6>[ 3.107734] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 3.108362] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 3.109194] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 3.109965] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 3.110018] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2 <6>[ 3.110061] pci 0000:00:02.0: VF BAR 0 [mem 0x501b000000-0x5021ffffff 64bit pref]: assigned <6>[ 3.110072] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned <6>[ 3.110078] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff]: assigned <6>[ 3.110084] pci 0000:00:15.0: BAR 0 [mem 0x501a2d9000-0x501a2d9fff 64bit]: assigned <6>[ 3.110100] pci 0000:00:15.1: BAR 0 [mem 0x501a2da000-0x501a2dafff 64bit]: assigned <6>[ 3.110115] pci 0000:00:15.2: BAR 0 [mem 0x501a2dc000-0x501a2dcfff 64bit]: assigned <6>[ 3.110130] pci 0000:00:15.3: BAR 0 [mem 0x501a2dd000-0x501a2ddfff 64bit]: assigned <6>[ 3.110145] pci 0000:00:19.0: BAR 0 [mem 0x501a2de000-0x501a2defff 64bit]: assigned <6>[ 3.110160] pci 0000:00:19.1: BAR 0 [mem 0x501a2df000-0x501a2dffff 64bit]: assigned <6>[ 3.110175] pci 0000:00:1f.5: BAR 0 [mem 0x8c120000-0x8c120fff]: assigned <6>[ 3.110198] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 3.110207] pci 0000:00:06.0: bridge window [mem 0x8c000000-0x8c0fffff] <6>[ 3.110218] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 3.110227] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 3.110235] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff] <6>[ 3.110242] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 3.110251] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 3.110257] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff] <6>[ 3.110269] pci 0000:00:07.3: bridge window [mem 0x80000000-0x85ffffff] <6>[ 3.110276] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 3.110286] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 3.110292] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 3.110297] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 3.110302] pci_bus 0000:00: resource 7 [mem 0x80000000-0xbfffffff window] <6>[ 3.110307] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x3ffbfffffff window] <6>[ 3.110313] pci_bus 0000:01: resource 1 [mem 0x8c000000-0x8c0fffff] <6>[ 3.110318] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] <6>[ 3.110323] pci_bus 0000:02: resource 1 [mem 0x86000000-0x8bffffff] <6>[ 3.110328] pci_bus 0000:02: resource 2 [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 3.110334] pci_bus 0000:2c: resource 0 [io 0x5000-0x5fff] <6>[ 3.110338] pci_bus 0000:2c: resource 1 [mem 0x80000000-0x85ffffff] <6>[ 3.110343] pci_bus 0000:2c: resource 2 [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 3.111511] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 3.113633] PCI: CLS 0 bytes, default 64 <6>[ 3.113738] DMAR: No RMRR found <6>[ 3.113766] DMAR: No ATSR found <6>[ 3.113770] DMAR: dmar0: Using Queued invalidation <6>[ 3.113777] DMAR: dmar1: Using Queued invalidation <6>[ 3.114713] pci 0000:00:02.0: Adding to iommu group 0 <6>[ 3.115927] pci 0000:00:00.0: Adding to iommu group 1 <6>[ 3.115986] pci 0000:00:04.0: Adding to iommu group 2 <6>[ 3.116053] pci 0000:00:05.0: Adding to iommu group 3 <6>[ 3.116134] pci 0000:00:06.0: Adding to iommu group 4 <6>[ 3.116207] pci 0000:00:07.0: Adding to iommu group 5 <6>[ 3.116272] pci 0000:00:07.3: Adding to iommu group 6 <6>[ 3.116334] pci 0000:00:08.0: Adding to iommu group 7 <6>[ 3.116389] pci 0000:00:0a.0: Adding to iommu group 8 <6>[ 3.116447] pci 0000:00:0b.0: Adding to iommu group 9 <6>[ 3.116520] pci 0000:00:0d.0: Adding to iommu group 10 <6>[ 3.116564] pci 0000:00:0d.3: Adding to iommu group 10 <6>[ 3.116632] pci 0000:00:12.0: Adding to iommu group 11 <6>[ 3.116703] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 3.116744] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 3.116831] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 3.116873] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 3.116916] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 3.116961] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 3.117032] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 3.117085] pci 0000:00:16.3: Adding to iommu group 14 <6>[ 3.117161] pci 0000:00:19.0: Adding to iommu group 15 <6>[ 3.117204] pci 0000:00:19.1: Adding to iommu group 15 <6>[ 3.117309] pci 0000:00:1f.0: Adding to iommu group 16 <6>[ 3.117378] pci 0000:00:1f.3: Adding to iommu group 16 <6>[ 3.117427] pci 0000:00:1f.4: Adding to iommu group 16 <6>[ 3.117471] pci 0000:00:1f.5: Adding to iommu group 16 <6>[ 3.117518] pci 0000:00:1f.6: Adding to iommu group 16 <6>[ 3.117599] pci 0000:01:00.0: Adding to iommu group 17 <6>[ 3.132863] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 3.132872] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 3.132878] software IO TLB: mapped [mem 0x0000000056de6000-0x000000005ade6000] (64MB) <6>[ 3.136087] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 3.136348] clocksource: Switched to clocksource tsc <6>[ 3.136460] platform rtc_cmos: registered platform RTC device (no PNP device found) <5>[ 3.146104] Initialise system trusted keyrings <5>[ 3.146201] Key type blacklist registered <6>[ 3.146405] workingset: timestamp_bits=36 max_order=23 bucket_order=0 <6>[ 3.159151] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 3.159289] ntfs3: Enabled Linux POSIX ACLs support <6>[ 3.159297] ntfs3: Read-only LZX/Xpress compression included <5>[ 3.160912] integrity: Platform Keyring initialized <5>[ 3.160943] integrity: Machine keyring initialized <6>[ 3.168987] xor: automatically using best checksumming function avx <5>[ 3.169001] Key type asymmetric registered <5>[ 3.169017] Asymmetric key parser 'x509' registered <6>[ 3.169174] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) <6>[ 3.169475] io scheduler mq-deadline registered <6>[ 3.173245] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 3.175796] pcieport 0000:00:06.0: PME: Signaling with IRQ 122 <6>[ 3.178015] pcieport 0000:00:07.0: PME: Signaling with IRQ 123 <6>[ 3.179888] pcieport 0000:00:07.3: PME: Signaling with IRQ 124 <6>[ 3.182331] ACPI: AC: AC Adapter [ADP1] (on-line) <6>[ 3.182771] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 3.183202] ACPI: button: Lid Switch [LID0] <6>[ 3.183564] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 3.183809] ACPI: button: Sleep Button [SLPB] <6>[ 3.184124] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 3.184355] ACPI: button: Power Button [PWRB] <6>[ 3.307625] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 3.307640] ACPI: thermal: Thermal Zone [TZ00] (42 C) <6>[ 3.309320] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled <6>[ 3.309505] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 3.311226] ACPI: battery: Slot [BAT0] (battery present) <6>[ 3.333143] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 3.352306] serial 0000:00:12.0: enabling device (0000 -> 0002) <6>[ 3.354984] serial 0000:00:16.3: enabling device (0001 -> 0003) <6>[ 3.379423] 0000:00:16.3: ttyS4 at I/O 0x3020 (irq = 19, base_baud = 115200) is a 16550A <5>[ 3.381558] hpet_acpi_add: no address or irqs in _CRS <6>[ 3.381682] Linux agpgart interface v0.103 <6>[ 3.410060] ACPI: bus type drm_connector registered <7>[ 3.411654] initcall simpledrm_platform_driver_init blacklisted <6>[ 3.442558] loop: module loaded <6>[ 3.492949] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 3.625002] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 3.757844] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 3.887217] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <6>[ 3.978979] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002) <6>[ 4.108701] intel-lpss 0000:00:19.1: enabling device (0000 -> 0002) <5>[ 4.215072] Key type psk registered <6>[ 4.217662] nvme 0000:01:00.0: platform quirk: setting simple suspend <6>[ 4.218389] tun: Universal TUN/TAP device driver, 1.6 <6>[ 4.218600] nvme nvme0: pci function 0000:01:00.0 <6>[ 4.219165] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 4.219252] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 4.220996] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 4.223156] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 4.223173] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 4.223185] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 4.223468] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.19 <6>[ 4.223482] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.223488] usb usb1: Product: xHCI Host Controller <6>[ 4.223493] usb usb1: Manufacturer: Linux 6.19.0-rc7-CI_DRM_17892-ge81ccbb3ef7a+ xhci-hcd <6>[ 4.223500] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 4.224279] hub 1-0:1.0: USB hub found <6>[ 4.224358] hub 1-0:1.0: 1 port detected <6>[ 4.227721] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.19 <6>[ 4.227730] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.227736] usb usb2: Product: xHCI Host Controller <6>[ 4.227741] usb usb2: Manufacturer: Linux 6.19.0-rc7-CI_DRM_17892-ge81ccbb3ef7a+ xhci-hcd <6>[ 4.227747] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 4.228321] hub 2-0:1.0: USB hub found <6>[ 4.228370] hub 2-0:1.0: 4 ports detected <6>[ 4.248541] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 4.248563] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 4.250128] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 4.251376] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 4.251391] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 4.251402] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 4.251547] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.19 <6>[ 4.251554] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.251560] usb usb3: Product: xHCI Host Controller <6>[ 4.251564] usb usb3: Manufacturer: Linux 6.19.0-rc7-CI_DRM_17892-ge81ccbb3ef7a+ xhci-hcd <6>[ 4.251571] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 4.252139] hub 3-0:1.0: USB hub found <6>[ 4.252176] hub 3-0:1.0: 12 ports detected <6>[ 4.285547] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.19 <6>[ 4.285566] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.285578] usb usb4: Product: xHCI Host Controller <6>[ 4.285587] usb usb4: Manufacturer: Linux 6.19.0-rc7-CI_DRM_17892-ge81ccbb3ef7a+ xhci-hcd <6>[ 4.285600] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 4.286559] hub 4-0:1.0: USB hub found <6>[ 4.286607] hub 4-0:1.0: 2 ports detected <6>[ 4.295673] usbcore: registered new interface driver usb-storage <6>[ 4.295913] usbcore: registered new interface driver usbserial_generic <6>[ 4.296014] usbserial: USB Serial support registered for generic <6>[ 4.296108] usbcore: registered new interface driver ftdi_sio <6>[ 4.296156] usbserial: USB Serial support registered for FTDI USB Serial Device <6>[ 4.296249] usbcore: registered new interface driver pl2303 <6>[ 4.296292] usbserial: USB Serial support registered for pl2303 <6>[ 4.296444] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 4.296456] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <6>[ 4.298073] nvme nvme0: allocated 64 MiB host memory buffer (1 segment). <6>[ 4.336880] nvme nvme0: 16/0/0 default/read/poll queues <6>[ 4.347093] nvme0n1: p1 p2 <3>[ 5.001595] i8042: Can't read CTR while initializing i8042 <3>[ 5.001614] i8042 i8042: probe with driver i8042 failed with error -5 <6>[ 5.002771] mousedev: PS/2 mouse device common for all mice <6>[ 5.004578] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 5.006981] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 5.007212] rtc_cmos rtc_cmos: setting system clock to 2026-01-27T13:19:17 UTC (1769519957) <6>[ 5.007513] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 5.007618] i2c_dev: i2c /dev entries driver <6>[ 5.013689] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 5.013718] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 5.013737] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. <6>[ 5.013799] device-mapper: uevent: version 1.0.3 <6>[ 5.014422] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev <6>[ 5.014454] intel_pstate: Intel P-state driver initializing <6>[ 5.028178] intel_pstate: HWP enabled <6>[ 5.028229] sdhci: Secure Digital Host Controller Interface driver <6>[ 5.028248] sdhci: Copyright(c) Pierre Ossman <6>[ 5.028644] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 5.036868] drop_monitor: Initializing network drop monitor service <6>[ 5.037436] NET: Registered PF_INET6 protocol family <6>[ 5.040344] Segment Routing with IPv6 <6>[ 5.040393] In-situ OAM (IOAM) with IPv6 <6>[ 5.040473] NET: Registered PF_PACKET protocol family <5>[ 5.040737] Key type dns_resolver registered <4>[ 5.054653] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 5.056606] microcode: Current revision: 0x0000001c <6>[ 5.058955] IPI shorthand broadcast: enabled <6>[ 5.074362] sched_clock: Marking stable (5065001406, 9035521)->(5143219978, -69183051) <6>[ 5.077803] registered taskstats version 1 <5>[ 5.082499] Loading compiled-in X.509 certificates <6>[ 5.129974] Demotion targets for Node 0: null <6>[ 5.130239] kmemleak: Kernel memory leak detector initialized (mem pool available: 14930) <6>[ 5.130256] kmemleak: Automatic memory scanning thread started <5>[ 5.130503] Key type .fscrypt registered <5>[ 5.130508] Key type fscrypt-provisioning registered <6>[ 5.133811] Btrfs loaded, zoned=yes, fsverity=yes <5>[ 5.133919] Key type trusted registered <5>[ 5.139105] Key type encrypted registered <6>[ 5.139115] AppArmor: AppArmor sha256 policy hashing enabled <5>[ 5.139139] Loading compiled-in module X.509 certificates <5>[ 5.139816] Loaded X.509 cert 'Build time autogenerated kernel key: 04a9392e60d3653d2e2cd1119d702fd8bebda67c' <6>[ 5.139827] ima: Allocated hash algorithm: sha256 <6>[ 5.180350] ima: No architecture policies found <6>[ 5.180506] evm: Initialising EVM extended attributes: <6>[ 5.180513] evm: security.selinux <6>[ 5.180518] evm: security.SMACK64 <6>[ 5.180522] evm: security.SMACK64EXEC <6>[ 5.180527] evm: security.SMACK64TRANSMUTE <6>[ 5.180532] evm: security.SMACK64MMAP <6>[ 5.180537] evm: security.apparmor <6>[ 5.180541] evm: security.ima <6>[ 5.180545] evm: security.capability <6>[ 5.180549] evm: HMAC attrs: 0x1 <6>[ 5.183288] PM: Magic number: 10:647:332 <6>[ 5.183349] tty tty53: hash matches <6>[ 5.183485] memory memory182: hash matches <6>[ 5.183566] netconsole: network logging started <6>[ 5.184295] RAS: Correctable Errors collector initialized. <6>[ 5.184472] clk: Disabling unused clocks <6>[ 5.184484] PM: genpd: Disabling unused power domains <4>[ 5.185398] check access for rdinit=/init failed: -2, ignoring <6>[ 5.185404] md: Waiting for all devices to be available before autodetect <6>[ 5.185409] md: If you don't use raid, use raid=noautodetect <6>[ 5.185414] md: Autodetecting RAID arrays. <6>[ 5.185421] md: autorun ... <6>[ 5.185424] md: ... autorun DONE. <6>[ 5.223398] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd <6>[ 5.237512] usb 4-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 <6>[ 5.237590] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 <6>[ 5.237617] usb 4-1: Product: USB 10/100/1000 LAN <6>[ 5.237636] usb 4-1: Manufacturer: Realtek <6>[ 5.237651] usb 4-1: SerialNumber: 000001 <6>[ 5.261464] EXT4-fs (nvme0n1p2): mounted filesystem 50f9c5b5-0801-45a5-b2f8-ae8d17396a16 ro with ordered data mode. Quota mode: none. <6>[ 5.261538] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 5.262468] devtmpfs: mounted <6>[ 5.280500] Freeing unused decrypted memory: 2036K <6>[ 5.281796] Freeing unused kernel image (initmem) memory: 5720K <6>[ 5.281823] Write protecting the kernel read-only data: 36864k <6>[ 5.283422] Freeing unused kernel image (text/rodata gap) memory: 1044K <6>[ 5.284034] Freeing unused kernel image (rodata/data gap) memory: 584K <6>[ 5.290212] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 5.308133] Run /sbin/init as init process <7>[ 5.308140] with arguments: <7>[ 5.308141] /sbin/init <7>[ 5.308142] with environment: <7>[ 5.308142] HOME=/ <7>[ 5.308143] TERM=linux <7>[ 5.390695] systemd[1]: Inserted module 'autofs4' <7>[ 5.433829] systemd[1]: systemd 255.4-1ubuntu8.12 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <7>[ 5.433860] systemd[1]: Detected architecture x86-64. <7>[ 5.435490] systemd[1]: Hostname set to . <7>[ 5.724847] systemd[1]: Queued start job for default target graphical.target. <7>[ 5.763099] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. <7>[ 5.765207] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. <7>[ 5.766887] systemd[1]: Created slice user.slice - User and Session Slice. <7>[ 5.767176] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. <7>[ 5.767890] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. <7>[ 5.768025] systemd[1]: Expecting device dev-disk-by\x2duuid-BC00\x2dEEBB.device - /dev/disk/by-uuid/BC00-EEBB... <7>[ 5.768129] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. <7>[ 5.768220] systemd[1]: Reached target slices.target - Slice Units. <7>[ 5.768295] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. <7>[ 5.768369] systemd[1]: Reached target snapd.mounts.target - Mounted snaps. <7>[ 5.768449] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. <7>[ 5.768721] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. <7>[ 5.769158] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. <7>[ 5.769477] systemd[1]: Listening on multipathd.socket - multipathd control socket. <7>[ 5.769843] systemd[1]: Listening on syslog.socket - Syslog Socket. <7>[ 5.770217] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. <7>[ 5.770465] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. <7>[ 5.770802] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). <7>[ 5.771190] systemd[1]: Listening on systemd-journald.socket - Journal Socket. <7>[ 5.771529] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. <7>[ 5.771746] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 5.772320] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. <7>[ 5.772648] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. <7>[ 5.776590] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... <7>[ 5.779954] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... <7>[ 5.783156] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... <7>[ 5.786328] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... <7>[ 5.796521] systemd[1]: Starting systemd-journald.service - Journal Service... <7>[ 5.802145] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... <7>[ 5.805866] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... <7>[ 5.809772] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... <7>[ 5.811974] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... <7>[ 5.814915] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... <7>[ 5.817197] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... <7>[ 5.820106] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... <7>[ 5.823232] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... <7>[ 5.824812] systemd-journald[309]: Collecting audit messages is disabled. <7>[ 5.827349] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... <7>[ 5.832675] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics... <7>[ 5.833513] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). <7>[ 5.838201] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... <6>[ 5.841298] pstore: Using crash dump compression: deflate <6>[ 5.842467] pstore: Registered efi_pstore as persistent store backend <7>[ 5.842814] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... <7>[ 5.842944] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 5.843014] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 5.846819] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... <6>[ 5.849235] fuse: init (API version 7.45) <7>[ 5.851997] systemd[1]: Started systemd-journald.service - Journal Service. <6>[ 5.993358] EXT4-fs (nvme0n1p2): re-mounted 50f9c5b5-0801-45a5-b2f8-ae8d17396a16 r/w. <6>[ 6.019327] Adding 8388604k swap on /swap.img. Priority:-1 extents:66 across:952238080k SS <7>[ 6.039961] systemd-journald[309]: Received client request to flush runtime journal. <7>[ 6.061592] systemd-journald[309]: /var/log/journal/09bbc4ccef2141a7b5ecf81299acfffb/system.journal: Journal file uses a different sequence number ID, rotating. <7>[ 6.061625] systemd-journald[309]: Rotating system journal. <4>[ 6.796375] nvme nvme0: using unchecked data buffer <6>[ 6.923893] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002) <6>[ 6.946991] input: Intel HID events as /devices/platform/INTC1077:00/input/input3 <6>[ 6.952649] intel_pmc_ssram_telemetry 0000:00:14.2: enabling device (0000 -> 0002) <6>[ 6.954261] intel-hid INTC1077:00: platform supports 5 button array <6>[ 6.970011] input: Intel HID 5 button array as /devices/platform/INTC1077:00/input/input4 <3>[ 7.132644] int3472-tps68470 i2c-INT3472:0d: TPS68470 init error -121 <3>[ 7.132894] int3472-tps68470 i2c-INT3472:0d: probe with driver int3472-tps68470 failed with error -121 <5>[ 7.169834] audit: type=1400 audit(1769519959.660:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=568 comm="apparmor_parser" <5>[ 7.170011] audit: type=1400 audit(1769519959.660:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=569 comm="apparmor_parser" <5>[ 7.170440] audit: type=1400 audit(1769519959.661:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=572 comm="apparmor_parser" <5>[ 7.170951] audit: type=1400 audit(1769519959.661:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=570 comm="apparmor_parser" <5>[ 7.171385] audit: type=1400 audit(1769519959.662:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=571 comm="apparmor_parser" <5>[ 7.173420] audit: type=1400 audit(1769519959.664:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=573 comm="apparmor_parser" <5>[ 7.175834] audit: type=1400 audit(1769519959.666:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=574 comm="apparmor_parser" <5>[ 7.176208] audit: type=1400 audit(1769519959.667:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=575 comm="apparmor_parser" <5>[ 7.178926] audit: type=1400 audit(1769519959.669:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=576 comm="apparmor_parser" <5>[ 7.181578] audit: type=1400 audit(1769519959.672:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=577 comm="apparmor_parser" <4>[ 7.241836] resource: resource sanity check: requesting [mem 0x00000000fedc0000-0x00000000fedcffff], which spans more than pnp 00:04 [mem 0xfedc0000-0xfedc7fff] <4>[ 7.241880] caller igen6_probe+0x190/0x9ea [igen6_edac] mapping multiple BARs <6>[ 7.247289] pci 0000:00:08.0: Setting to D3hot <6>[ 7.255583] EDAC MC0: Giving out device to module igen6_edac controller Intel_client_SoC MC#0: DEV 0000:00:00.0 (INTERRUPT) <6>[ 7.259097] pci 0000:00:05.0: Setting to D3hot <6>[ 7.261009] ACPI: bus type thunderbolt registered <6>[ 7.271082] pci 0000:00:0b.0: Setting to D3hot <6>[ 7.284370] intel_pmc_core INT33A1:00: initialized <6>[ 7.298700] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002) <6>[ 7.300247] EDAC MC1: Giving out device to module igen6_edac controller Intel_client_SoC MC#1: DEV 0000:00:00.0 (INTERRUPT) <6>[ 7.303938] EDAC igen6: v2.5.1 <6>[ 7.319834] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_37xx_v0.0.bin, version: 20230726*MTL_CLIENT_SILICON-release*2101*ci_tag_mtl_pv_vpu_rc_20230726_2101*648a666b8b9 <6>[ 7.319840] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS <6>[ 7.382229] idma64 idma64.0: Found Intel integrated DMA 64-bit <6>[ 7.391909] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 7.391916] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 7.401929] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode <6>[ 7.406080] idma64 idma64.1: Found Intel integrated DMA 64-bit <6>[ 7.418311] i801_smbus 0000:00:1f.4: SPD Write Disable is set <6>[ 7.418445] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt <6>[ 7.430277] idma64 idma64.2: Found Intel integrated DMA 64-bit <6>[ 7.452118] idma64 idma64.3: Found Intel integrated DMA 64-bit <6>[ 7.484195] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0 <6>[ 7.488799] usbcore: registered new device driver r8152-cfgselector <6>[ 7.531777] i2c i2c-6: Successfully instantiated SPD at 0x54 <6>[ 7.535098] i2c i2c-6: Successfully instantiated SPD at 0x56 <6>[ 7.621673] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 7.621678] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 7.621679] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 7.621680] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules <6>[ 7.621681] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 7.626747] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock <6>[ 7.642475] r8152-cfgselector 4-1: reset SuperSpeed USB device number 2 using xhci_hcd <6>[ 7.669128] proc_thermal_pci 0000:00:04.0: enabling device (0000 -> 0002) <6>[ 7.684149] intel_rapl_common: Found RAPL domain package <6>[ 7.752176] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88 <6>[ 7.752182] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection <6>[ 7.752300] e1000e 0000:00:1f.6 eth0: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF <6>[ 7.773744] intel_rapl_msr: PL4 support detected. <6>[ 7.777776] intel_rapl_common: Found RAPL domain package <6>[ 7.777782] intel_rapl_common: Found RAPL domain core <6>[ 7.777784] intel_rapl_common: Found RAPL domain uncore <6>[ 7.777789] intel_rapl_common: Found RAPL domain psys <6>[ 7.796980] r8152 4-1:1.0 eth1: v1.12.13 <6>[ 7.798900] usbcore: registered new interface driver r8152 <6>[ 7.805774] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 7.810315] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.825321] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.831710] usbcore: registered new interface driver cdc_ether <6>[ 7.843393] e1000e 0000:00:1f.6 eno0: renamed from eth0 <6>[ 7.844271] usbcore: registered new interface driver r8153_ecm <4>[ 7.847030] spi-nor spi0.0: supply vcc not found, using dummy regulator <6>[ 7.855716] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <5>[ 7.867662] Creating 1 MTD partitions on "0000:00:1f.5": <5>[ 7.867696] 0x000000000000-0x000002000000 : "BIOS" <6>[ 7.875487] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.886568] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.890922] hid: raw HID events driver (C) Jiri Kosina <6>[ 7.899325] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6 <6>[ 7.927369] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.931944] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.933025] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.933494] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.935103] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.936022] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.936487] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.938007] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 7.938196] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.938455] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 7.942562] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.944506] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.947543] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.948307] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.950839] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.952080] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.954203] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.954725] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.956927] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.957399] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 7.959239] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 7.959991] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.963505] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.028741] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.033561] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.038438] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.041469] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.045906] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.050091] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.055450] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.061866] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.066427] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.069146] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.073167] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.076746] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.079816] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.082721] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.087636] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.091666] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.094860] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.099091] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.102760] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.107797] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.119454] r8152 4-1:1.0 enxe2015072f451: renamed from eth1 <4>[ 8.229757] block nvme0n1: No UUID available providing old NGUID <6>[ 8.420479] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.588871] loop0: detected capacity change from 0 to 8 <6>[ 8.798151] Consider using thermal netlink events interface <6>[ 10.804119] r8152 4-1:1.0 enxe2015072f451: carrier on <3>[ 16.481623] ucsi_acpi USBC000:00: error -ETIMEDOUT: PPM init failed <6>[ 18.555264] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 18.557105] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component <7>[ 23.212953] systemd-journald[309]: /var/log/journal/09bbc4ccef2141a7b5ecf81299acfffb/user-1000.journal: Journal file uses a different sequence number ID, rotating. <6>[ 23.964234] /proc/cgroups lists only v1 controllers, use cgroup.controllers of root cgroup for v2 info <7>[ 48.053977] [IGT] i915_module_load: executing <4>[ 48.054028] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <7>[ 48.172222] [IGT] i915_module_load: starting subtest load <4>[ 48.781365] ********************************************************** <4>[ 48.781366] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 48.781366] ** ** <4>[ 48.781367] ** trace_printk() being used. Allocating extra memory. ** <4>[ 48.781368] ** ** <4>[ 48.781369] ** This means that this is a DEBUG kernel and it is ** <4>[ 48.781369] ** unsafe for production use. ** <4>[ 48.781370] ** ** <4>[ 48.781371] ** If you see this message and you are not debugging ** <4>[ 48.781371] ** the kernel, report this immediately to your vendor! ** <4>[ 48.781372] ** ** <4>[ 48.781373] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 48.781373] ********************************************************** <5>[ 48.819067] Setting dangerous option force_probe - tainting kernel <6>[ 48.823612] i915 0000:00:02.0: [drm] Found meteorlake (device ID 7d55) integrated display version 14.00 stepping C0 <7>[ 48.824831] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K <7>[ 48.825068] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:no slpc:yes) <7>[ 48.825241] i915 0000:00:02.0: [drm:intel_pch_detect [i915]] PCH not involved in display, using fake PCH type 1026 for south display <7>[ 48.825424] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7>[ 48.825623] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7>[ 48.825799] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT1: Setting up Standalone Media GT <7>[ 48.825989] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K <7>[ 48.826229] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT1: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes) <7>[ 48.826488] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7>[ 48.826671] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 38400 kHz <7>[ 48.827198] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vdbox enable: 0000, instances: 0000 <7>[ 48.827344] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vebox enable: 0000, instances: 0000 <7>[ 48.827819] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vdbox enable: 0005, instances: 0005 <7>[ 48.827959] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vebox enable: 0001, instances: 0001 <7>[ 48.828367] i915 0000:00:02.0: [drm:ggtt_probe_common [i915]] Using direct GSM access <7>[ 48.828641] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7>[ 48.828778] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 0M <7>[ 48.828910] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M <6>[ 48.829039] i915 0000:00:02.0: [drm] VT-d active for gfx access <6>[ 48.829381] i915 0000:00:02.0: vgaarb: deactivate vga console <6>[ 48.829763] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7>[ 48.829772] i915 0000:00:02.0: [drm:i915_gem_stolen_lmem_setup [i915]] Using direct DSM access <7>[ 48.829954] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000078400947 <7>[ 48.830432] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 131072K, usable: 126976K <7>[ 48.830728] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 31513 MiB [mem 0x00000000-0x7b193dfff], io: n/a <7>[ 48.830872] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(6): stolen-local: 124 MiB [mem 0x00800000-0x083fffff], io: 124 MiB [mem 0x70800000-0x783fffff] <7>[ 48.831235] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x63e04018 <7>[ 48.831430] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 3.0.0 <7>[ 48.831614] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7>[ 48.831772] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7>[ 48.831921] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7>[ 48.832070] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Mailbox #2 for backlight present <7>[ 48.832241] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 48.832394] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR5 <7>[ 48.832565] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 8 <7>[ 48.832749] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 4 <7>[ 48.832910] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7>[ 48.833074] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=3200 tRP=64 tRDPRE=40 tRAS=136 tRCD=64 tRC=200 <7>[ 48.833247] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=6000 tRP=112 tRDPRE=80 tRAS=0 tRCD=112 tRC=112 <7>[ 48.833415] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=16 tRCD=120 tRC=136 <7>[ 48.833581] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 3: DCLK=5600 tRP=104 tRDPRE=80 tRAS=240 tRCD=104 tRC=344 <7>[ 48.833762] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 0: num_planes=0 deratedbw=28913 peakbw: 51200 <7>[ 48.833922] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 48.834080] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 48.834234] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 48.834388] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 0: num_planes=0 deratedbw=35532 peakbw: 51200 <7>[ 48.834541] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 48.834709] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 48.834861] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 48.835012] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 48.835162] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 48.835326] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 48.835480] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 48.835631] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 48.835806] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 48.835957] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 48.836108] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 48.836258] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 48.836408] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 48.836557] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 48.836709] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 48.836876] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 48.837024] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 48.837172] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 48.837323] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 48.837952] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7>[ 48.838118] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT METEORLAKE ", BDB version 253 <7>[ 48.838279] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7) <7>[ 48.838431] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5) <7>[ 48.838581] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7>[ 48.838733] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7>[ 48.838907] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 850) <7>[ 48.839059] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34) <7>[ 48.839207] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7>[ 48.839369] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7>[ 48.839521] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366) <7>[ 48.839673] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305) <7>[ 48.839844] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 98, min size 136) <7>[ 48.839999] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7>[ 48.840156] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7>[ 48.840305] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 48.840466] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7>[ 48.840613] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7>[ 48.840764] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7>[ 48.840966] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 48.841123] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7>[ 48.841277] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 48.841431] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 48.841584] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7>[ 48.841737] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 48.841905] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 48.842057] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 48.842206] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 48.842354] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 48.842503] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 48.842657] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a <7>[ 48.842837] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 48.843082] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7>[ 48.843275] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 48.843502] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 48.843752] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7>[ 48.843957] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7>[ 48.844113] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 48.844269] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 48.844472] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7>[ 48.844632] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7>[ 48.844808] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B <7>[ 48.844984] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C <7>[ 48.845150] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D <7>[ 48.845776] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/mtl_dmc.bin <7>[ 48.846622] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7>[ 48.847821] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us <7>[ 48.848028] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7>[ 48.848211] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 85 (85.0 usec) <7>[ 48.848367] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 86 (86.0 usec) <7>[ 48.848519] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 101 (101.0 usec) <7>[ 48.848669] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 102 (102.0 usec) <7>[ 48.848817] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 155 (155.0 usec) <7>[ 48.848964] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 6 (6.0 usec) <7>[ 48.849140] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 91 (91.0 usec) <7>[ 48.849286] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 92 (92.0 usec) <7>[ 48.849429] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 107 (107.0 usec) <7>[ 48.849574] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 108 (108.0 usec) <7>[ 48.849716] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 161 (161.0 usec) <7>[ 48.852437] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7>[ 48.852685] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x86fc0 <7>[ 48.852877] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7>[ 48.853059] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f004 = 0x42c0408 (EVT_HTP) <7>[ 48.853245] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL) <7>[ 48.853414] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x8f008 = 0x534052f4 (EVT_HTP) <7>[ 48.853582] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 1: <7>[ 48.853738] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f074 = 0x96fc0 <7>[ 48.853903] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling) <7>[ 48.854066] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f004 = 0x212c20f4 (EVT_HTP) <7>[ 48.854226] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling) <7>[ 48.854402] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f008 = 0x222021e8 (EVT_HTP) <7>[ 48.854560] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 48.854717] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f00c = 0x23f422dc (EVT_HTP) <7>[ 48.854876] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 48.855034] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f010 = 0x26ec26c0 (EVT_HTP) <7>[ 48.855207] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 2: <7>[ 48.855391] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f474 = 0x9efc0 <7>[ 48.855550] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling) <7>[ 48.855703] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f404 = 0xa618a5e0 (EVT_HTP) <7>[ 48.855863] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling) <7>[ 48.856016] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f408 = 0xa70ca6d4 (EVT_HTP) <7>[ 48.856172] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 48.856348] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f40c = 0xa8e0a7c8 (EVT_HTP) <7>[ 48.856508] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 48.856661] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f410 = 0xabd8abac (EVT_HTP) <7>[ 48.856825] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 3: <7>[ 48.856994] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f874 = 0x53fc0 <7>[ 48.857008] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 4 display pipes available. <7>[ 48.857164] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 48.857332] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f80c = 0x24a02388 (EVT_HTP) <7>[ 48.857513] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 48.857676] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f810 = 0x2798276c (EVT_HTP) <7>[ 48.857847] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 4: <7>[ 48.858009] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5fc74 = 0x5afc0 <7>[ 48.858172] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 48.858338] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5fc0c = 0x94a09388 (EVT_HTP) <7>[ 48.858532] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5fc40 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 48.858694] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5fc10 = 0x9798976c (EVT_HTP) <7>[ 48.864598] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 48.864806] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz <7>[ 48.864980] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 1305600 kHz <7>[ 48.866667] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:505:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 48.867174] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:505:DDI A/PHY A] <7>[ 48.867392] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7>[ 48.867563] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <6>[ 48.867717] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/mtl_dmc.bin (v2.23) <7>[ 48.867744] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7>[ 48.867981] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 48.868184] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7>[ 48.868350] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7>[ 48.868512] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7>[ 48.868679] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7>[ 48.869019] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 48.869251] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:505:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 48.869489] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 48.869640] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 48.869807] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 48.869960] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 48.870123] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 48.870405] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 48.870723] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 48.871907] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 turning VDD on <7>[ 48.872173] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 48.873401] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 00 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 48.873773] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7>[ 48.874439] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 04 83 85 04 00 <7>[ 48.875184] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 3 <7>[ 48.875637] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] PSR2 supported <7>[ 48.876925] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 48.882734] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 48.882744] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD monitor <7>[ 48.882749] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD size 20, SAD count 0 <7>[ 48.882805] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:506:eDP-1] using preferred EDID fixed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 48.883273] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:506:eDP-1] Performing OUI wait (0 ms) <7>[ 48.883733] i915 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [i915]] [CONNECTOR:506:eDP-1] Detected unsupported HDR backlight interface version 0 <7>[ 48.883906] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:506:eDP-1] DRRS type: none <7>[ 48.884134] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:506:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 48.884340] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:506:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 48.884569] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 48.884722] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 48.884882] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 48.885027] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 48.885169] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 48.885462] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 48.885789] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:514:DDI B/PHY B] Using AUX CH B (VBT) <7>[ 48.885993] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:514:DDI B/PHY B] <7>[ 48.886469] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:514:DDI B/PHY B] <7>[ 48.886632] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:514:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7>[ 48.887055] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:532:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 48.887546] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 48.887854] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:532:DDI TC1/PHY TC1] <7>[ 48.888211] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:541:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 48.888507] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected) <7>[ 48.888892] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7>[ 48.889105] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:541:DDI TC2/PHY TC2] <7>[ 48.889364] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:541:DDI TC2/PHY TC2] Using DDC pin 0xa (VBT) <7>[ 48.889681] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:545:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 48.889942] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port F/TC#3: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 48.890183] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:545:DDI TC3/PHY TC3] <7>[ 48.890537] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:554:DDI TC4/PHY TC4] Using AUX CH USBC4 (VBT) <7>[ 48.890803] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port G/TC#4: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 48.891063] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:554:DDI TC4/PHY TC4] <7>[ 48.891545] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled <6>[ 48.891732] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io:owns=io+mem <7>[ 48.892518] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:149:pipe A] hw state readout: enabled <7>[ 48.892861] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:267:pipe B] hw state readout: disabled <7>[ 48.893195] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:385:pipe C] hw state readout: disabled <7>[ 48.893536] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:503:pipe D] hw state readout: disabled <7>[ 48.893728] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: enabled, pipe A <7>[ 48.893917] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A <7>[ 48.894075] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A <7>[ 48.894231] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A <7>[ 48.894386] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A <7>[ 48.894577] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:143:cursor A] hw state readout: disabled, pipe A <7>[ 48.894760] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 1B] hw state readout: disabled, pipe B <7>[ 48.894948] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:181:plane 2B] hw state readout: disabled, pipe B <7>[ 48.895105] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 3B] hw state readout: disabled, pipe B <7>[ 48.895260] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:241:plane 4B] hw state readout: disabled, pipe B <7>[ 48.895415] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:251:plane 5B] hw state readout: disabled, pipe B <7>[ 48.895587] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:261:cursor B] hw state readout: disabled, pipe B <7>[ 48.895762] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:269:plane 1C] hw state readout: disabled, pipe C <7>[ 48.895948] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:299:plane 2C] hw state readout: disabled, pipe C <7>[ 48.896127] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:329:plane 3C] hw state readout: disabled, pipe C <7>[ 48.896286] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:359:plane 4C] hw state readout: disabled, pipe C <7>[ 48.896440] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:369:plane 5C] hw state readout: disabled, pipe C <7>[ 48.896612] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:379:cursor C] hw state readout: disabled, pipe C <7>[ 48.896780] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:387:plane 1D] hw state readout: disabled, pipe D <7>[ 48.896951] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:417:plane 2D] hw state readout: disabled, pipe D <7>[ 48.897117] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:447:plane 3D] hw state readout: disabled, pipe D <7>[ 48.897272] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:477:plane 4D] hw state readout: disabled, pipe D <7>[ 48.897429] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:487:plane 5D] hw state readout: disabled, pipe D <7>[ 48.897600] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:497:cursor D] hw state readout: disabled, pipe D <7>[ 48.898721] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 48.898935] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:505:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 48.899103] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:514:DDI B/PHY B] hw state readout: disabled, pipe A <7>[ 48.899252] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:516:DP-MST A] hw state readout: disabled, pipe A <7>[ 48.899397] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:517:DP-MST B] hw state readout: disabled, pipe B <7>[ 48.899541] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:518:DP-MST C] hw state readout: disabled, pipe C <7>[ 48.899710] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:519:DP-MST D] hw state readout: disabled, pipe D <7>[ 48.899936] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 48.900097] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:532:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 48.900242] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:534:DP-MST A] hw state readout: disabled, pipe A <7>[ 48.900387] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:535:DP-MST B] hw state readout: disabled, pipe B <7>[ 48.900530] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:536:DP-MST C] hw state readout: disabled, pipe C <7>[ 48.900687] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:537:DP-MST D] hw state readout: disabled, pipe D <7>[ 48.900888] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 48.901042] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:541:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 48.901199] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 48.901349] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:545:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 48.901495] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:547:DP-MST A] hw state readout: disabled, pipe A <7>[ 48.901640] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:548:DP-MST B] hw state readout: disabled, pipe B <7>[ 48.901803] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:549:DP-MST C] hw state readout: disabled, pipe C <7>[ 48.901949] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:550:DP-MST D] hw state readout: disabled, pipe D <7>[ 48.902109] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port G/TC#4: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 48.902257] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:554:DDI TC4/PHY TC4] hw state readout: disabled, pipe A <7>[ 48.902414] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:556:DP-MST A] hw state readout: disabled, pipe A <7>[ 48.902559] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:557:DP-MST B] hw state readout: disabled, pipe B <7>[ 48.902704] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:558:DP-MST C] hw state readout: disabled, pipe C <7>[ 48.902860] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:559:DP-MST D] hw state readout: disabled, pipe D <7>[ 48.903826] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:149:pipe A] reserving DPLL 0 <7>[ 48.903984] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x1, on 1 <7>[ 48.904142] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 48.904296] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7>[ 48.904458] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 48.904618] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7>[ 48.904785] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7>[ 48.904942] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7>[ 48.905218] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:506:eDP-1] hw state readout: enabled <7>[ 48.905389] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:515:DP-1] hw state readout: disabled <7>[ 48.905556] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:527:HDMI-A-1] hw state readout: disabled <7>[ 48.905723] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:533:DP-2] hw state readout: disabled <7>[ 48.905905] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:542:HDMI-A-2] hw state readout: disabled <7>[ 48.906071] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:546:DP-3] hw state readout: disabled <7>[ 48.906234] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:555:DP-4] hw state readout: disabled <7>[ 48.906455] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 256910 kHz <7>[ 48.906610] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:63:plane 2A] min_cdclk 0 kHz <7>[ 48.906757] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 3A] min_cdclk 0 kHz <7>[ 48.906948] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:123:plane 4A] min_cdclk 0 kHz <7>[ 48.907106] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 5A] min_cdclk 0 kHz <7>[ 48.907252] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:143:cursor A] min_cdclk 0 kHz <7>[ 48.907397] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:149:pipe A] min_cdclk 256910 kHz <7>[ 48.907540] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 1B] min_cdclk 0 kHz <7>[ 48.907682] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:181:plane 2B] min_cdclk 0 kHz <7>[ 48.907823] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 3B] min_cdclk 0 kHz <7>[ 48.907986] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:241:plane 4B] min_cdclk 0 kHz <7>[ 48.908131] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:251:plane 5B] min_cdclk 0 kHz <7>[ 48.908274] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:261:cursor B] min_cdclk 0 kHz <7>[ 48.908419] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:267:pipe B] min_cdclk 0 kHz <7>[ 48.908567] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:269:plane 1C] min_cdclk 0 kHz <7>[ 48.908712] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:299:plane 2C] min_cdclk 0 kHz <7>[ 48.908853] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:329:plane 3C] min_cdclk 0 kHz <7>[ 48.909011] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:359:plane 4C] min_cdclk 0 kHz <7>[ 48.909153] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:369:plane 5C] min_cdclk 0 kHz <7>[ 48.909293] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:379:cursor C] min_cdclk 0 kHz <7>[ 48.909434] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:385:pipe C] min_cdclk 0 kHz <7>[ 48.909574] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:387:plane 1D] min_cdclk 0 kHz <7>[ 48.909717] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:417:plane 2D] min_cdclk 0 kHz <7>[ 48.909860] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:447:plane 3D] min_cdclk 0 kHz <7>[ 48.910022] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:477:plane 4D] min_cdclk 0 kHz <7>[ 48.910166] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:487:plane 5D] min_cdclk 0 kHz <7>[ 48.910311] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:497:cursor D] min_cdclk 0 kHz <7>[ 48.910455] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:503:pipe D] min_cdclk 0 kHz <7>[ 48.910801] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:149:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 48.910954] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:267:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 48.911119] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:385:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 48.911270] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:503:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 48.911417] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe A data rate 2055280 num active planes 1 <7>[ 48.911584] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe B data rate 0 num active planes 0 <7>[ 48.911743] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe C data rate 0 num active planes 0 <7>[ 48.911911] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe D data rate 0 num active planes 0 <7>[ 48.912247] i915 0000:00:02.0: [drm:intel_cmtg_sanitize [i915]] CMTG readout: CMTG A: enabled, CMTG B: n/a, Transcoder A secondary: yes, Transcoder B secondary: no <7>[ 48.912603] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:149:pipe A] enable: yes [setup_hw_state] <7>[ 48.912765] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 48.912921] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 48.913087] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 48.913244] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 48.913397] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7>[ 48.913549] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 48.913700] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 623587, link_n: 524288, tu: 64 <7>[ 48.913851] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 48.914003] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7>[ 48.914173] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7>[ 48.914333] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7>[ 48.914485] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7>[ 48.914660] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 48.914843] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7>[ 48.915029] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7>[ 48.915242] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7>[ 48.915427] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7>[ 48.915613] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7>[ 48.915762] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 48.915911] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 48.916059] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 48.916230] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 48.916382] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 48.916532] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 513820, min cdclk 256910 <7>[ 48.916682] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 48.916829] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 48.916976] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 48.917126] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 48.917285] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 48.917434] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: fracen: no, <7>[ 48.917584] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 225, tx_clk_div: 1. <7>[ 48.917732] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state: <7>[ 48.917879] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21 <7>[ 48.918026] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 48.918174] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 48.918336] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 48.918484] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 48.918635] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 48.918784] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 48.918960] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 48.919106] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 48.919265] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 48.919411] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 48.919556] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 48.919706] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 48.919854] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 48.920002] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 48.920148] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 48.920304] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 48.920449] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 48.920594] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 48.920740] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:267:pipe B] enable: no [setup_hw_state] <7>[ 48.920893] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:385:pipe C] enable: no [setup_hw_state] <7>[ 48.921043] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:503:pipe D] enable: no [setup_hw_state] <7>[ 48.921193] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] TBT PLL enabled but not in use, disabling <7>[ 48.921704] i915 0000:00:02.0: [drm:skl_get_initial_plane_config [i915]] [CRTC:149:pipe A][PLANE:33:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800 <7>[ 48.921977] i915 0000:00:02.0: [drm:initial_plane_vma [i915]] Using dma_addr=0x0000000000800000, based on initial plane programming <7>[ 48.922232] i915 0000:00:02.0: [drm:_i915_gem_object_stolen_init [i915]] creating preallocated stolen object: stolen_offset=0x0000000000000000, size=0x00000000013c7000 <7>[ 48.922886] i915 0000:00:02.0: [drm:initial_plane_vma [i915]] Initial plane fb bound to 0x0 in the ggtt (original 0xfec00000) <7>[ 48.931388] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [2048K, 832K) <7>[ 48.937635] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [1040K, 832K) <7>[ 48.937819] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [13c7000, fee00000] <7>[ 48.937972] i915 0000:00:02.0: [drm:nop_init_clock_gating [i915]] No clock gating settings or workarounds applied. <7>[ 48.938118] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: L3BANK steering: group=0x0, instance=0x0 <7>[ 48.938270] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: DSS steering: group=0x0, instance=0x0 <7>[ 48.938416] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: INSTANCE 0 steering: group=0x0, instance=0x0 <7>[ 48.938569] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7>[ 48.940826] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 7 engine workarounds on rcs'0 <7>[ 48.941159] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 whitelist workarounds on rcs'0 <7>[ 48.941323] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 7 context workarounds on rcs'0 <7>[ 48.942210] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 engine workarounds on bcs'0 <7>[ 48.942376] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 context workarounds on bcs'0 <7>[ 48.942817] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 engine workarounds on ccs'0 <7>[ 48.942998] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 context workarounds on ccs'0 <7>[ 48.944337] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 48.944526] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 24 ext-regs. <7>[ 48.944706] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7>[ 48.966517] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0x13c804f <7>[ 48.966713] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x410800 <7>[ 48.966870] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4 <7>[ 48.967021] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7>[ 48.967174] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x2f92 <7>[ 48.967325] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x7d550008 <7>[ 48.967473] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7>[ 48.967623] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7>[ 48.967789] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7>[ 48.967938] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7>[ 48.968084] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7>[ 48.968230] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7>[ 48.968375] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7>[ 48.968536] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <6>[ 48.969483] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/mtl_guc_70.bin version 70.53.0 <7>[ 48.979663] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 8ms, freq = 1750MHz -> 1700MHz vs 2200MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 48.981618] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6>[ 48.984199] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6>[ 48.984203] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <6>[ 48.984714] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled <7>[ 48.985074] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT0: GUC: Querying HW config table: size = 0, offset = 0x00000000 <7>[ 48.986088] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT0: GUC: Querying HW config table: size = 752, offset = 0x01FFC000 <7>[ 48.993063] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: OADDRM steering: group=0x0, instance=0x0 <7>[ 48.993235] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 5 GT workarounds on global <7>[ 48.994625] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'0 <7>[ 48.994786] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'0 <7>[ 48.995523] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'2 <7>[ 48.995717] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'2 <7>[ 48.996641] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vecs'0 <7>[ 48.996802] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vecs'0 <7>[ 48.997479] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on other'6 <7>[ 48.997674] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on other'6 <7>[ 48.999678] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT1: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 48.999872] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT1: GUC: capture found 24 ext-regs. <7>[ 49.000052] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT1: GUC: Used 4 KB for temporary ADS regset <7>[ 49.022096] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 0] = 0x1ffd04f <7>[ 49.022276] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 1] = 0x400000 <7>[ 49.022462] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 2] = 0x4 <7>[ 49.022618] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 3] = 0x3 <7>[ 49.022788] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 4] = 0x47fc <7>[ 49.022939] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 5] = 0x7d550008 <7>[ 49.023089] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 6] = 0x0 <7>[ 49.023237] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 7] = 0x0 <7>[ 49.023432] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 8] = 0x0 <7>[ 49.023593] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 9] = 0x0 <7>[ 49.023739] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[10] = 0x0 <7>[ 49.023883] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[11] = 0x0 <7>[ 49.024026] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[12] = 0x0 <7>[ 49.024167] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[13] = 0x0 <7>[ 49.024315] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT1: HuC: loaded by GSC = no <7>[ 49.027101] i915 0000:00:02.0: [drm:i915_gsc_proxy_component_bind [i915]] GT1: GSC proxy mei component bound <6>[ 49.027289] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops i915_gsc_proxy_component_ops [i915]) <6>[ 49.027879] i915 0000:00:02.0: [drm] GT1: GuC firmware i915/mtl_guc_70.bin version 70.53.0 <6>[ 49.027882] i915 0000:00:02.0: [drm] GT1: HuC firmware i915/mtl_huc_gsc.bin version 8.5.4 <7>[ 49.042019] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT1: GUC: init took 12ms, freq = 1200MHz -> 1300MHz vs 1300MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 49.042290] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled <7>[ 49.051276] i915 0000:00:02.0: [drm:intel_huc_wait_for_auth_complete [i915]] GT1: HuC: auth took 8ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x0000C1DC, count = 0, ret = 0 <6>[ 49.051438] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for clear media <6>[ 49.052348] i915 0000:00:02.0: [drm] GT1: GUC: submission enabled <6>[ 49.052350] i915 0000:00:02.0: [drm] GT1: GUC: SLPC enabled <6>[ 49.052535] i915 0000:00:02.0: [drm] GT1: GUC: RC enabled <7>[ 49.052764] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT1: GUC: Querying HW config table: size = 0, offset = 0x00000000 <7>[ 49.053796] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT1: GUC: Querying HW config table: size = 752, offset = 0xFEDA5000 <7>[ 49.059847] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7>[ 49.060009] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7>[ 49.060157] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7>[ 49.060299] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'2 to vcs1 <7>[ 49.060438] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7>[ 49.060604] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed ccs'0 to ccs0 <7>[ 49.060739] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed other'6 to other0 <6>[ 49.062345] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized <7>[ 49.063614] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:149:pipe A] FQ 0: start 0x90008 <7>[ 49.063798] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:149:pipe A] FQ 1: start 0x90108 <7>[ 49.063969] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:149:pipe A] FQ 2: start 0x90208 <7>[ 49.064131] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:149:pipe A] FQ 3: start 0x90308 <7>[ 49.064288] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:149:pipe A] FQ 4: start 0x903c8 <7>[ 49.064442] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:267:pipe B] FQ 0: start 0x98008 <7>[ 49.064598] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:267:pipe B] FQ 1: start 0x98108 <7>[ 49.064765] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:267:pipe B] FQ 2: start 0x98208 <7>[ 49.064918] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:267:pipe B] FQ 3: start 0x98308 <7>[ 49.065069] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:267:pipe B] FQ 4: start 0x983c8 <7>[ 49.065219] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:385:pipe C] FQ 0: start 0x52008 <7>[ 49.065370] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:385:pipe C] FQ 1: start 0x52108 <7>[ 49.065519] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:385:pipe C] FQ 2: start 0x52208 <7>[ 49.065679] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:385:pipe C] FQ 3: start 0x52308 <7>[ 49.065833] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:385:pipe C] FQ 4: start 0x523c8 <7>[ 49.065986] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:503:pipe D] FQ 0: start 0x59008 <7>[ 49.066137] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:503:pipe D] FQ 1: start 0x59108 <7>[ 49.066287] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:503:pipe D] FQ 2: start 0x59208 <7>[ 49.066437] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:503:pipe D] FQ 3: start 0x59308 <7>[ 49.066586] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:503:pipe D] FQ 4: start 0x593c8 <7>[ 49.067039] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 49.067206] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:149:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 49.067368] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 2048) -> ( 0 - 4001), size 2048 -> 4001 <7>[ 49.067519] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95 <7>[ 49.067670] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm <7>[ 49.067838] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 2, 2, 2, 2, 2, 2, 0, 0, 1, 3, 1 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 <7>[ 49.067989] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 49, 49, 49, 49, 49, 49, 0, 0, 7, 73, 7 -> 49, 385, 385, 457, 457, 673, 0, 0, 0, 73, 0 <7>[ 49.068139] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 0, 82, 0 <7>[ 49.068339] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:267:pipe B] enable: no [fastset] <7>[ 49.068511] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:385:pipe C] enable: no [fastset] <7>[ 49.068675] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:503:pipe D] enable: no [fastset] <7>[ 49.070448] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 42393600 bytes of contiguous stolen space for FBC, limit: 1 <7>[ 49.070628] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:33:plane 1A] <7>[ 49.070883] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: no -> yes (pipe: A) <7>[ 49.071057] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 4 (mbus joined: yes) <7>[ 49.074042] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:267:pipe B] <7>[ 49.074483] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:385:pipe C] <7>[ 49.074837] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:503:pipe D] <7>[ 49.079398] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:506:eDP-1] adding connector to sysfs <7>[ 49.084272] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:506:eDP-1] backlight device intel_backlight registered <7>[ 49.084937] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:506:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7>[ 49.085547] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:506:eDP-1] Panel prepare <7>[ 49.086783] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 49.089196] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:506:eDP-1] generating connector hotplug event <7>[ 49.089321] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:515:DP-1] adding connector to sysfs <7>[ 49.090023] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7>[ 49.091008] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:515:DP-1] generating connector hotplug event <7>[ 49.091053] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:527:HDMI-A-1] adding connector to sysfs <7>[ 49.091330] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:527:HDMI-A-1] generating connector hotplug event <7>[ 49.091374] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:533:DP-2] adding connector to sysfs <7>[ 49.091791] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2 <7>[ 49.092463] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:533:DP-2] generating connector hotplug event <7>[ 49.092509] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:542:HDMI-A-2] adding connector to sysfs <7>[ 49.093018] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:542:HDMI-A-2] generating connector hotplug event <7>[ 49.093054] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:546:DP-3] adding connector to sysfs <7>[ 49.093430] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 49.094064] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:546:DP-3] generating connector hotplug event <7>[ 49.094103] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:555:DP-4] adding connector to sysfs <7>[ 49.094463] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY TC4 bus for card0-DP-4 <7>[ 49.095217] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:555:DP-4] generating connector hotplug event <6>[ 49.095248] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7>[ 49.098353] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected <6>[ 49.111182] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 49.114462] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 <7>[ 49.116585] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 49.116818] i915 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [i915]] aud_ts_cdclk set to M=60, N=768 <7>[ 49.117024] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 49.117030] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7>[ 49.118647] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:515:DP-1] <7>[ 49.119179] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] found possible fb from [PLANE:33:plane 1A] <7>[ 49.119400] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:267:pipe B] not active, skipping <7>[ 49.119583] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:385:pipe C] not active, skipping <7>[ 49.119750] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:503:pipe D] not active, skipping <7>[ 49.119908] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] checking [PLANE:33:plane 1A] for BIOS fb <7>[ 49.120058] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:149:pipe A] area: 2880x1800, bpp: 32, size: 20736000 <7>[ 49.120206] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] fb big enough [PLANE:33:plane 1A] (20738048 >= 20736000) <7>[ 49.120368] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:267:pipe B] not active, skipping <7>[ 49.120521] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:385:pipe C] not active, skipping <7>[ 49.120692] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:503:pipe D] not active, skipping <7>[ 49.120846] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] using BIOS fb for initial console <7>[ 49.121187] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 49.123886] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 49.124588] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:515:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 49.124807] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1] <7>[ 49.129230] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:527:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 49.129439] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:533:DP-2] <7>[ 49.130085] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 49.130362] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:533:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 49.130536] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:542:HDMI-A-2] <7>[ 49.131033] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7>[ 49.135488] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:542:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 49.135738] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:546:DP-3] <7>[ 49.136122] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 49.136391] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:546:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 49.136578] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:555:DP-4] <7>[ 49.136880] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 49.137123] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:555:DP-4] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 49.137319] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <6>[ 49.137497] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7>[ 49.137572] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] <7>[ 49.137585] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:506:eDP-1] <7>[ 49.138437] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 49.138969] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 49.139503] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 49.139694] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 49.139878] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 49.140165] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 49.140171] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD monitor <7>[ 49.140175] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD size 20, SAD count 0 <7>[ 49.140211] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] VRR capable: no <7>[ 49.140388] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 49.140558] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 49.141514] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] status updated from unknown to connected <7>[ 49.141712] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 49.142102] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] probed modes: <7>[ 49.142109] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 49.142113] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:DP-1] <7>[ 49.142117] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:515:DP-1] <7>[ 49.143261] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9a01 <7>[ 49.143811] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7>[ 49.143823] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7>[ 49.146523] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:DP-1] disconnected <7>[ 49.146530] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] <7>[ 49.146534] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1] <7>[ 49.150959] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected <7>[ 49.150966] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] <7>[ 49.150970] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:533:DP-2] <7>[ 49.151441] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] disconnected <7>[ 49.151448] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-2] <7>[ 49.151452] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:542:HDMI-A-2] <7>[ 49.155983] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-2] disconnected <7>[ 49.155989] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:546:DP-3] <7>[ 49.155992] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:546:DP-3] <7>[ 49.156291] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:546:DP-3] disconnected <7>[ 49.156295] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:555:DP-4] <7>[ 49.156297] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:555:DP-4] <7>[ 49.156637] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:555:DP-4] disconnected <7>[ 49.156642] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:eDP-1] enabled? yes <7>[ 49.156648] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:515:DP-1] enabled? no <7>[ 49.156652] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:527:HDMI-A-1] enabled? no <7>[ 49.156655] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:DP-2] enabled? no <7>[ 49.156659] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:HDMI-A-2] enabled? no <7>[ 49.156662] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:546:DP-3] enabled? no <7>[ 49.156665] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:555:DP-4] enabled? no <7>[ 49.156643] i915 0000:00:02.0: [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=9600/192000 <7>[ 49.156926] i915 0000:00:02.0: [drm:intel_panel_actually_set_backlight [i915]] [CONNECTOR:506:eDP-1] set backlight level = 13892 <7>[ 49.157424] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 49.157473] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:eDP-1] found preferred mode: 2880x1800 <7>[ 49.157476] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 49.157490] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7>[ 49.157695] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7>[ 49.157718] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] re-using BIOS fb <7>[ 49.157982] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 2880x1800 fb: 0x00000000 <6>[ 49.159794] fbcon: i915drmfb (fb0) is primary device <7>[ 49.160885] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:506:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 49.161099] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:505:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7>[ 49.161268] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 link rate required 1926825 available 2160000 <7>[ 49.161443] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 49.161679] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:505:DDI A/PHY A] [CRTC:149:pipe A] <7>[ 49.161856] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 623587/524288, found tu 64, data 7483046/8388608 link 498869/524288) <7>[ 49.162039] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in dpll_hw_state <7>[ 49.162223] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7>[ 49.162404] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 49.162580] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_hw_state: fracen: no, <7>[ 49.162795] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] multiplier: 225, tx_clk_div: 1. <7>[ 49.162969] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_rawhw_state: <7>[ 49.163130] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] tx: 0x10, cmn: 0x21 <7>[ 49.163285] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 49.163440] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 49.163596] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 49.163778] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 49.163949] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 49.164140] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7>[ 49.164399] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 49.164594] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_hw_state: fracen: yes, <7>[ 49.164782] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] quot: 40960, rem: 0, den: 1, <7>[ 49.164953] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 49.165128] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_rawhw_state: <7>[ 49.165313] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] tx: 0x10, cmn: 0x21 <7>[ 49.165493] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 49.165682] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 49.165881] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 49.166052] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 49.166217] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 49.166373] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 49.166542] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 432000, found 540000) <7>[ 49.166726] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in set_context_latency (expected 0, found 1) <7>[ 49.166966] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7>[ 49.167176] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:149:pipe A] releasing DPLL 0 <7>[ 49.167431] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 49.167628] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 <7>[ 49.167833] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 0, 73, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 <7>[ 49.168019] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 0, 82, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 <7>[ 49.168201] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:63:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 49.168371] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:63:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.168548] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:63:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.168730] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:63:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.168921] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:93:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 49.169096] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:93:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.169283] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:93:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.169525] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:93:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.169713] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 49.169902] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:123:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.170087] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:123:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.170259] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.170429] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:133:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 49.170601] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:133:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.170768] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:133:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.170946] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:133:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.171116] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:143:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 49.171283] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:143:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.171456] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:143:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.171628] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:143:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.171828] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200 <7>[ 49.172094] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 49.172340] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 49.172522] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 49.172686] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159 <7>[ 49.172894] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:149:pipe A] allocated DPLL 0 <7>[ 49.173118] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:149:pipe A] reserving DPLL 0 <7>[ 49.173320] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:149:pipe A] enable: yes [modeset] <7>[ 49.173504] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 49.173665] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 49.173821] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 49.174004] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 49.174181] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7>[ 49.174355] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 49.174523] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 49.174735] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 49.174947] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7>[ 49.175132] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7>[ 49.175303] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7>[ 49.175475] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7>[ 49.175655] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 49.175833] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 4, length 14 <7>[ 49.176011] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7>[ 49.176166] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7>[ 49.176334] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7>[ 49.176502] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7>[ 49.176661] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7>[ 49.176823] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7>[ 49.176986] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 1 <7>[ 49.177235] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1878, vmax: 1878, flipline: 1878, pipeline full: 0, guardband: 76 vsync start: 75, vsync end: 69 <7>[ 49.177426] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1878, vmax vtotal: 1878 <7>[ 49.177594] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7>[ 49.177762] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 49.177916] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 49.178079] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 49.178239] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 49.178394] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 49.178558] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820, min cdclk 256910 <7>[ 49.178715] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 49.178866] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 49.179014] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 49.179176] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 49.179332] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 49.179498] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: fracen: yes, <7>[ 49.179713] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] quot: 40960, rem: 0, den: 1, <7>[ 49.179913] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 49.180069] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state: <7>[ 49.180242] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21 <7>[ 49.180413] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 49.180591] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 49.180759] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 49.180914] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 49.181063] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 49.181226] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 49.181388] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 49.181557] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 49.181722] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 49.181873] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 49.182020] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 49.182168] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 49.182373] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 49.182575] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 49.182740] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 49.182904] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 49.183055] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 49.183206] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 49.183384] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:564] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 49.183556] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 49.183719] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 49.183879] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7>[ 49.184026] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7>[ 49.184172] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7>[ 49.184397] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7>[ 49.184588] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7>[ 49.193281] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 49.193495] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 49.193709] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 49.193898] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 49.194071] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 49.194226] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 49.194382] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 49.194540] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 49.194740] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 49.194919] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 49.195099] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 49.195263] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 49.195412] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 49.195561] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 49.195735] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 49.195920] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 49.196090] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 49.196243] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 49.196358] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7>[ 49.196394] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 49.196542] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 49.196715] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 49.196882] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 49.197050] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 49.197203] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 49.197353] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 49.197507] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 49.197682] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 49.197835] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 49.198016] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 49.198195] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 49.198342] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 49.198489] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 49.198638] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 49.198819] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 49.199021] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 49.199206] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <6>[ 49.204733] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 49.206287] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <6>[ 49.206953] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 <6>[ 49.207571] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <6>[ 49.210356] i915 0000:00:02.0: [drm] GT1: Loaded GSC firmware i915/mtl_gsc_1.bin (cv1.0, r102.1.15.1926, svn 1) <7>[ 49.231198] i915 0000:00:02.0: [drm:intel_huc_wait_for_auth_complete [i915]] GT1: HuC: auth took 0ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x00116C68, count = 0, ret = 0 <6>[ 49.231400] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for all workloads <7>[ 49.409118] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:506:eDP-1] set backlight PWM = 0 <7>[ 49.409874] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7>[ 49.420040] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 turn panel power off <7>[ 49.420389] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 49.420804] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 49.420622] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000 <7>[ 49.421287] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:505:DDI A/PHY A] - short <7>[ 49.471178] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 49.472256] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A] <7>[ 49.472237] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:505:DDI A/PHY A] <7>[ 49.472753] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7>[ 49.473379] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:505:DDI A/PHY A] - long <7>[ 49.473884] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7>[ 49.474273] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7>[ 49.474238] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:505:DDI A/PHY A] <7>[ 49.474795] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7>[ 49.475578] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:33:plane 1A] <7>[ 49.475920] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0xffff0072 0x13421c72) <7>[ 49.476205] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:505:DDI A/PHY A] <7>[ 49.476428] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:514:DDI B/PHY B] <7>[ 49.476589] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:516:DP-MST A] <7>[ 49.476743] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:517:DP-MST B] <7>[ 49.476894] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:518:DP-MST C] <7>[ 49.477044] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:519:DP-MST D] <7>[ 49.477203] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:532:DDI TC1/PHY TC1] <7>[ 49.477350] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:534:DP-MST A] <7>[ 49.477497] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:535:DP-MST B] <7>[ 49.477645] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:536:DP-MST C] <7>[ 49.477792] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:537:DP-MST D] <7>[ 49.477942] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:541:DDI TC2/PHY TC2] <7>[ 49.478095] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:545:DDI TC3/PHY TC3] <7>[ 49.478264] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:547:DP-MST A] <7>[ 49.478411] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:548:DP-MST B] <7>[ 49.478557] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:549:DP-MST C] <7>[ 49.478702] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:550:DP-MST D] <7>[ 49.478847] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:554:DDI TC4/PHY TC4] <7>[ 49.478992] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:556:DP-MST A] <7>[ 49.479136] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:557:DP-MST B] <7>[ 49.479298] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:558:DP-MST C] <7>[ 49.479447] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:559:DP-MST D] <7>[ 49.479701] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 49.481290] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A] <7>[ 49.481835] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7>[ 49.484336] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 turn panel power on <7>[ 49.484536] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 wait for panel power cycle (488 ms remaining) <7>[ 49.692058] i915 0000:00:02.0: [drm:gsc_work [i915]] GT1: GSC Proxy initialized <7>[ 49.993871] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7>[ 50.042948] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 50.043616] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 50.044315] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 50.075619] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7>[ 50.076260] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:505:DDI A/PHY A] - long <7>[ 50.076840] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20 <7>[ 50.077540] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:505:DDI A/PHY A] <7>[ 50.208940] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 50.208911] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 50.209708] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 50.210872] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4 <7>[ 50.247116] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 50.248175] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 turning VDD on <7>[ 50.248914] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 50.252592] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 50.253809] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:506:eDP-1][ENCODER:505:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 50.254644] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:506:eDP-1][ENCODER:505:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07 <7>[ 50.255850] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:506:eDP-1][ENCODER:505:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 50.256792] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:506:eDP-1][ENCODER:505:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 50.257764] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:506:eDP-1][ENCODER:505:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 50.257916] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:506:eDP-1][ENCODER:505:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7>[ 50.259305] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:506:eDP-1][ENCODER:505:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 50.259450] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:506:eDP-1][ENCODER:505:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7>[ 50.260174] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7>[ 50.260475] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7>[ 50.260650] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7>[ 50.260855] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:506:eDP-1] set backlight PWM = 13892 <7>[ 50.271674] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2 <7>[ 50.273433] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:506:eDP-1] <7>[ 50.273738] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:149:pipe A] <7>[ 50.275397] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 50.276931] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0x2000071 0x13421c72) <6>[ 50.277535] Console: switching to colour frame buffer device 180x56 <6>[ 50.295275] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7>[ 50.295283] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 14 <7>[ 50.295420] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 50.295445] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 50.295453] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: C0 <7>[ 50.295623] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7>[ 50.295776] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: yes <7>[ 50.295927] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: yes <7>[ 50.296080] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7>[ 50.296231] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7>[ 50.296335] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] <7>[ 50.296382] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: yes <7>[ 50.296532] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7>[ 50.296357] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:506:eDP-1] <7>[ 50.296701] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7>[ 50.296851] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7>[ 50.297000] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7>[ 50.297150] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7>[ 50.297298] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7>[ 50.297446] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7>[ 50.297599] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: no <7>[ 50.297776] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7>[ 50.297938] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7>[ 50.298098] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7>[ 50.298258] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7>[ 50.298281] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 50.298410] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: yes <7>[ 50.298554] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 38400 kHz <7>[ 50.298818] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 50.299044] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 50.299259] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7>[ 50.299264] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 50.299445] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D <7>[ 50.299588] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 50.299595] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD monitor <7>[ 50.299605] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD size 20, SAD count 0 <7>[ 50.299745] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] VRR capable: no <7>[ 50.299971] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 50.300183] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 50.300704] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C <7>[ 50.301909] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B <7>[ 50.302864] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x7d55 rev=0x08 platform=METEORLAKE (subplatform=0x0) gen=12 <7>[ 50.303209] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 12.71 <7>[ 50.303503] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] probed modes: <7>[ 50.303511] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 50.303514] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:DP-1] <7>[ 50.303518] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:515:DP-1] <7>[ 50.303545] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 13 <7>[ 50.303883] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: B0 <7>[ 50.304124] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: C0 <7>[ 50.304304] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 0 <7>[ 50.304480] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x41 <7>[ 50.304652] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x211000 <7>[ 50.304836] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: METEORLAKE <7>[ 50.305010] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7>[ 50.305181] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7>[ 50.305356] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 46 <7>[ 50.305525] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7>[ 50.305694] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7>[ 50.305872] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7>[ 50.306037] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7>[ 50.306203] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7>[ 50.306371] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7>[ 50.306498] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7>[ 50.306617] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7>[ 50.306735] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7>[ 50.306861] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: yes <7>[ 50.306979] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: yes <7>[ 50.307098] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7>[ 50.307218] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7>[ 50.307337] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7>[ 50.307455] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: yes <7>[ 50.307572] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: yes <7>[ 50.307689] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7>[ 50.307865] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:DP-1] disconnected <7>[ 50.307808] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7>[ 50.307870] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] <7>[ 50.307877] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1] <7>[ 50.307937] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: no <7>[ 50.308056] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7>[ 50.308175] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: yes <7>[ 50.308292] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7>[ 50.308408] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7>[ 50.308527] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: yes <7>[ 50.308646] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: yes <7>[ 50.308766] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: yes <7>[ 50.308884] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7>[ 50.309013] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: yes <7>[ 50.309132] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7>[ 50.309251] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7>[ 50.309370] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7>[ 50.309489] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7>[ 50.309606] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: yes <7>[ 50.309722] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: no <7>[ 50.309840] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7>[ 50.309966] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7>[ 50.310085] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7>[ 50.310202] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7>[ 50.310318] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7>[ 50.310436] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 400003 <7>[ 50.310556] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 8 <7>[ 50.310674] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: geometry dss mask=00000000,000000ff <7>[ 50.310792] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: compute dss mask=00000000,000000ff <7>[ 50.310910] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 128 <7>[ 50.311040] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 16 <7>[ 50.311159] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7>[ 50.311278] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7>[ 50.311396] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: no <7>[ 50.311513] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 4041400 <7>[ 50.311630] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 8 <7>[ 50.311749] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: geometry dss mask=00000000,0000ff00 <7>[ 50.311867] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: compute dss mask=00000000,0000ff00 <7>[ 50.311991] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 128 <7>[ 50.312109] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 16 <7>[ 50.312206] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected <7>[ 50.312209] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] <7>[ 50.312225] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7>[ 50.312212] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:533:DP-2] <7>[ 50.312344] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7>[ 50.312462] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: no <6>[ 50.312579] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6>[ 50.312580] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6>[ 50.312580] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7>[ 50.312584] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 50.312837] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] disconnected <7>[ 50.312841] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-2] <7>[ 50.312844] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:542:HDMI-A-2] <7>[ 50.313205] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7>[ 50.317605] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-2] disconnected <7>[ 50.317610] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:546:DP-3] <7>[ 50.317613] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:546:DP-3] <7>[ 50.317869] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 50.318089] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:546:DP-3] disconnected <7>[ 50.318092] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:555:DP-4] <7>[ 50.318095] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:555:DP-4] <7>[ 50.318355] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 50.318571] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:555:DP-4] disconnected <7>[ 50.318574] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:eDP-1] enabled? yes <7>[ 50.318577] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:515:DP-1] enabled? no <7>[ 50.318579] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:527:HDMI-A-1] enabled? no <7>[ 50.318581] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:DP-2] enabled? no <7>[ 50.318583] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:HDMI-A-2] enabled? no <7>[ 50.318585] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:546:DP-3] enabled? no <7>[ 50.318586] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:555:DP-4] enabled? no <7>[ 50.318722] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 50.318738] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:eDP-1] found preferred mode: 2880x1800 <7>[ 50.318741] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 50.318766] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7>[ 50.327822] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 50.349510] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 50.349520] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 50.349812] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] <7>[ 50.349820] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:506:eDP-1] <7>[ 50.350682] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 50.351163] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 50.351350] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 50.351532] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 50.351735] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 50.351739] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD monitor <7>[ 50.351745] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD size 20, SAD count 0 <7>[ 50.351762] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] VRR capable: no <7>[ 50.351900] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 50.352067] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 50.352913] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] probed modes: <7>[ 50.352920] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 50.352924] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:DP-1] <7>[ 50.352927] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:515:DP-1] <7>[ 50.357288] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:DP-1] disconnected <7>[ 50.357293] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] <7>[ 50.357297] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1] <7>[ 50.361642] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected <7>[ 50.361646] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] <7>[ 50.361649] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:533:DP-2] <7>[ 50.361997] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] disconnected <7>[ 50.362000] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-2] <7>[ 50.362002] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:542:HDMI-A-2] <7>[ 50.366385] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-2] disconnected <7>[ 50.366389] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:546:DP-3] <7>[ 50.366392] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:546:DP-3] <7>[ 50.366643] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:546:DP-3] disconnected <7>[ 50.366646] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:555:DP-4] <7>[ 50.366649] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:555:DP-4] <7>[ 50.366879] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:555:DP-4] disconnected <7>[ 50.366881] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:eDP-1] enabled? yes <7>[ 50.366884] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:515:DP-1] enabled? no <7>[ 50.366886] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:527:HDMI-A-1] enabled? no <7>[ 50.366888] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:DP-2] enabled? no <7>[ 50.366890] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:HDMI-A-2] enabled? no <7>[ 50.366892] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:546:DP-3] enabled? no <7>[ 50.366894] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:555:DP-4] enabled? no <7>[ 50.366983] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 50.366996] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:eDP-1] found preferred mode: 2880x1800 <7>[ 50.366999] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 50.367020] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7>[ 50.371975] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 50.387146] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 50.394135] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c] <7>[ 50.427782] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 50.427913] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 50.430794] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509 <7>[ 50.460728] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 50.460824] [IGT] i915_module_load: finished subtest load, SUCCESS <7>[ 50.461217] [IGT] i915_module_load: exiting, ret=0 <7>[ 50.496020] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 51.388355] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.453886] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.453973] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.454112] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4 <7>[ 52.958731] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 turning VDD off <7>[ 52.959651] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 <7>[ 52.960186] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 52.961158] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 52.961525] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02