<5>[ 0.000000] Linux version 6.19.0-rc5-CI_DRM_17821-g733664f1edf3+ (kbuild2@gfx-ci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Wed Jan 14 17:25:00 UTC 2026 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] Hygon HygonGenuine <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] zhaoxin Shanghai <6>[ 0.000000] x86/tme: not enabled by BIOS <4>[ 0.000000] x86/CPU: Running old microcode <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000060a3efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000060a3f000-0x0000000063db6fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000063db7000-0x0000000063edbfff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x0000000063edc000-0x0000000063ffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x0000000063fff000-0x0000000063ffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000064000000-0x00000000787fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000000ffffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x63ffe000 ACPI 2.0=0x63ffe014 TPMFinalLog=0x63e11000 SMBIOS=0x60b16000 MEMATTR=0x5bd8b018 ESRT=0x5bd9bb98 MOKvar=0x60c4b000 TPMEventLog=0x63f0e018 <6>[ 0.000000] efi: Remove mem301: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem303: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.6 present. <6>[ 0.000000] DMI: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024 <6>[ 0.000000] DMI: Memory slots populated: 8/8 <6>[ 0.000000] tsc: Detected 3400.000 MHz processor <6>[ 0.000000] tsc: Detected 3379.200 MHz TSC <7>[ 0.000011] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000013] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000016] last_pfn = 0x880000 max_arch_pfn = 0x400000000 <6>[ 0.000021] MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs <6>[ 0.000023] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.000606] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000608] last_pfn = 0x64000 max_arch_pfn = 0x400000000 <6>[ 0.005038] esrt: Reserving ESRT space from 0x000000005bd9bb98 to 0x000000005bd9bcc0. <7>[ 0.005050] e820: update [mem 0x5bd9b000-0x5bd9bfff] usable ==> reserved <6>[ 0.005084] Using GB pages for direct mapping <6>[ 0.005888] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes <6>[ 0.005890] printk: early log buf free: 258704(98%) <6>[ 0.005891] Secure boot disabled <6>[ 0.005894] ACPI: Early table checksum verification disabled <6>[ 0.005899] ACPI: RSDP 0x0000000063FFE014 000024 (v02 INTEL ) <6>[ 0.005904] ACPI: XSDT 0x0000000063F15228 000184 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005909] ACPI: FACP 0x0000000063FDC000 000114 (v06 INTEL MTL 00000002 01000013) <6>[ 0.005914] ACPI: DSDT 0x0000000063F55000 083F8A (v02 INTEL MTL 00000002 01000013) <6>[ 0.005916] ACPI: FACS 0x0000000063DF7000 000040 <6>[ 0.005918] ACPI: SSDT 0x0000000063FFC000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.005920] ACPI: SSDT 0x0000000063FFB000 00070D (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.005922] ACPI: SSDT 0x0000000063FFA000 0005E4 (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.005925] ACPI: SSDT 0x0000000063FF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.005927] ACPI: SSDT 0x0000000063FF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.005929] ACPI: SSDT 0x0000000063FF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.005931] ACPI: SSDT 0x0000000063FF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.005933] ACPI: SSDT 0x0000000063FF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.005935] ACPI: SSDT 0x0000000063FF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.005937] ACPI: SSDT 0x0000000063FED000 003BC8 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.005939] ACPI: DTPR 0x0000000063FEC000 000098 (v01 00000000 00000000) <6>[ 0.005941] ACPI: SSDT 0x0000000063FEB000 000D03 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.005943] ACPI: SSDT 0x0000000063FE8000 002494 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.005945] ACPI: SSDT 0x0000000063FDE000 009AB7 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.005947] ACPI: SSDT 0x0000000063FDD000 0000F9 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.005950] ACPI: HPET 0x0000000063FDB000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005952] ACPI: APIC 0x0000000063FDA000 000358 (v05 INTEL MTL 00000002 01000013) <6>[ 0.005954] ACPI: MCFG 0x0000000063FD9000 00003C (v01 INTEL MTL 00000002 01000013) <6>[ 0.005956] ACPI: SSDT 0x0000000063F45000 00FCEF (v02 INTEL MtlP_Rvp 00001000 INTL 20210930) <6>[ 0.005957] ACPI: SSDT 0x0000000063F43000 00147F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.005960] ACPI: SSDT 0x0000000063F3E000 00389C (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.005962] ACPI: SSDT 0x0000000063F38000 00535A (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.005964] ACPI: SSDT 0x0000000063FFD000 00060E (v02 INTEL Tpm2Tabl 00001000 INTL 20210930) <6>[ 0.005966] ACPI: TPM2 0x0000000063F37000 00004C (v04 INTEL MTL 00000002 01000013) <6>[ 0.005968] ACPI: LPIT 0x0000000063F36000 0000CC (v01 INTEL MTL 00000002 01000013) <6>[ 0.005970] ACPI: WSMT 0x0000000063F35000 000028 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005972] ACPI: SSDT 0x0000000063F34000 000CA6 (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.005974] ACPI: SSDT 0x0000000063F2E000 00587D (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.005976] ACPI: DBGP 0x0000000063F2D000 000034 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005978] ACPI: DBG2 0x0000000063F2C000 000054 (v00 INTEL MTL 00000002 01000013) <6>[ 0.005981] ACPI: NHLT 0x0000000063F2B000 00098B (v00 INTEL MTL 00000002 01000013) <6>[ 0.005983] ACPI: SSDT 0x0000000063F29000 001191 (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.005985] ACPI: SSDT 0x0000000063F23000 005CAE (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.005987] ACPI: ECDT 0x0000000063F22000 000069 (v01 MTL 00000002 01000013) <6>[ 0.005990] ACPI: DMAR 0x0000000063F21000 0000A8 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005992] ACPI: FPDT 0x0000000063F20000 000044 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005994] ACPI: SSDT 0x0000000063F1E000 001015 (v02 INTEL xh_mtlp3 00000000 INTL 20210930) <6>[ 0.005996] ACPI: SSDT 0x0000000063F1B000 00281A (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.005998] ACPI: SSDT 0x0000000063F18000 0028D3 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.006000] ACPI: SSDT 0x0000000063F16000 0011A0 (v02 INTEL St00Ssdt 00001000 INTL 20210930) <6>[ 0.006003] ACPI: ASF! 0x0000000063F42000 000074 (v32 INTEL MTL 00000002 01000013) <6>[ 0.006005] ACPI: PHAT 0x0000000063F14000 000810 (v01 INTEL MTL 00000005 MSFT 0100000D) <6>[ 0.006007] ACPI: BGRT 0x0000000063F13000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.006009] ACPI: Reserving FACP table memory at [mem 0x63fdc000-0x63fdc113] <6>[ 0.006010] ACPI: Reserving DSDT table memory at [mem 0x63f55000-0x63fd8f89] <6>[ 0.006011] ACPI: Reserving FACS table memory at [mem 0x63df7000-0x63df703f] <6>[ 0.006011] ACPI: Reserving SSDT table memory at [mem 0x63ffc000-0x63ffc38b] <6>[ 0.006012] ACPI: Reserving SSDT table memory at [mem 0x63ffb000-0x63ffb70c] <6>[ 0.006012] ACPI: Reserving SSDT table memory at [mem 0x63ffa000-0x63ffa5e3] <6>[ 0.006013] ACPI: Reserving SSDT table memory at [mem 0x63ff9000-0x63ff91aa] <6>[ 0.006013] ACPI: Reserving SSDT table memory at [mem 0x63ff8000-0x63ff8393] <6>[ 0.006014] ACPI: Reserving SSDT table memory at [mem 0x63ff6000-0x63ff7bae] <6>[ 0.006015] ACPI: Reserving SSDT table memory at [mem 0x63ff4000-0x63ff561f] <6>[ 0.006015] ACPI: Reserving SSDT table memory at [mem 0x63ff2000-0x63ff3348] <6>[ 0.006016] ACPI: Reserving SSDT table memory at [mem 0x63ff1000-0x63ff1fba] <6>[ 0.006016] ACPI: Reserving SSDT table memory at [mem 0x63fed000-0x63ff0bc7] <6>[ 0.006017] ACPI: Reserving DTPR table memory at [mem 0x63fec000-0x63fec097] <6>[ 0.006017] ACPI: Reserving SSDT table memory at [mem 0x63feb000-0x63febd02] <6>[ 0.006018] ACPI: Reserving SSDT table memory at [mem 0x63fe8000-0x63fea493] <6>[ 0.006019] ACPI: Reserving SSDT table memory at [mem 0x63fde000-0x63fe7ab6] <6>[ 0.006019] ACPI: Reserving SSDT table memory at [mem 0x63fdd000-0x63fdd0f8] <6>[ 0.006020] ACPI: Reserving HPET table memory at [mem 0x63fdb000-0x63fdb037] <6>[ 0.006020] ACPI: Reserving APIC table memory at [mem 0x63fda000-0x63fda357] <6>[ 0.006021] ACPI: Reserving MCFG table memory at [mem 0x63fd9000-0x63fd903b] <6>[ 0.006021] ACPI: Reserving SSDT table memory at [mem 0x63f45000-0x63f54cee] <6>[ 0.006022] ACPI: Reserving SSDT table memory at [mem 0x63f43000-0x63f4447e] <6>[ 0.006022] ACPI: Reserving SSDT table memory at [mem 0x63f3e000-0x63f4189b] <6>[ 0.006023] ACPI: Reserving SSDT table memory at [mem 0x63f38000-0x63f3d359] <6>[ 0.006024] ACPI: Reserving SSDT table memory at [mem 0x63ffd000-0x63ffd60d] <6>[ 0.006024] ACPI: Reserving TPM2 table memory at [mem 0x63f37000-0x63f3704b] <6>[ 0.006024] ACPI: Reserving LPIT table memory at [mem 0x63f36000-0x63f360cb] <6>[ 0.006025] ACPI: Reserving WSMT table memory at [mem 0x63f35000-0x63f35027] <6>[ 0.006026] ACPI: Reserving SSDT table memory at [mem 0x63f34000-0x63f34ca5] <6>[ 0.006026] ACPI: Reserving SSDT table memory at [mem 0x63f2e000-0x63f3387c] <6>[ 0.006027] ACPI: Reserving DBGP table memory at [mem 0x63f2d000-0x63f2d033] <6>[ 0.006027] ACPI: Reserving DBG2 table memory at [mem 0x63f2c000-0x63f2c053] <6>[ 0.006028] ACPI: Reserving NHLT table memory at [mem 0x63f2b000-0x63f2b98a] <6>[ 0.006029] ACPI: Reserving SSDT table memory at [mem 0x63f29000-0x63f2a190] <6>[ 0.006029] ACPI: Reserving SSDT table memory at [mem 0x63f23000-0x63f28cad] <6>[ 0.006030] ACPI: Reserving ECDT table memory at [mem 0x63f22000-0x63f22068] <6>[ 0.006030] ACPI: Reserving DMAR table memory at [mem 0x63f21000-0x63f210a7] <6>[ 0.006031] ACPI: Reserving FPDT table memory at [mem 0x63f20000-0x63f20043] <6>[ 0.006031] ACPI: Reserving SSDT table memory at [mem 0x63f1e000-0x63f1f014] <6>[ 0.006033] ACPI: Reserving SSDT table memory at [mem 0x63f1b000-0x63f1d819] <6>[ 0.006033] ACPI: Reserving SSDT table memory at [mem 0x63f18000-0x63f1a8d2] <6>[ 0.006034] ACPI: Reserving SSDT table memory at [mem 0x63f16000-0x63f1719f] <6>[ 0.006034] ACPI: Reserving ASF! table memory at [mem 0x63f42000-0x63f42073] <6>[ 0.006035] ACPI: Reserving PHAT table memory at [mem 0x63f14000-0x63f1480f] <6>[ 0.006036] ACPI: Reserving BGRT table memory at [mem 0x63f13000-0x63f13037] <6>[ 0.006140] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.006397] No NUMA configuration found <6>[ 0.006398] Faking a node at [mem 0x0000000000000000-0x000000087fffffff] <6>[ 0.006407] NODE_DATA(0) allocated [mem 0x87fb52e40-0x87fb7dfff] <6>[ 0.006567] Zone ranges: <6>[ 0.006568] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.006570] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.006571] Normal [mem 0x0000000100000000-0x000000087fffffff] <6>[ 0.006572] Device empty <6>[ 0.006573] Movable zone start for each node <6>[ 0.006574] Early memory node ranges <6>[ 0.006574] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.006575] node 0: [mem 0x0000000000100000-0x0000000060a3efff] <6>[ 0.006575] node 0: [mem 0x0000000063fff000-0x0000000063ffffff] <6>[ 0.006576] node 0: [mem 0x0000000100000000-0x000000087fffffff] <6>[ 0.006577] Initmem setup node 0 [mem 0x0000000000001000-0x000000087fffffff] <6>[ 0.006584] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.006606] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.008756] On node 0, zone DMA32: 13760 pages in unavailable ranges <6>[ 0.050901] On node 0, zone Normal: 16384 pages in unavailable ranges <6>[ 0.051655] ACPI: PM-Timer IO Port: 0x1808 <4>[ 0.051661] CPU topo: Boot CPU APIC ID not the first enumerated APIC ID: 20 != 10 <4>[ 0.051662] CPU topo: [Firmware Bug]: APIC enumeration order not specification compliant <6>[ 0.051665] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.051711] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.051714] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.051715] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.051719] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.051720] ACPI: HPET id: 0x8086a201 base: 0xfed00000 <7>[ 0.051736] e820: update [mem 0x5bd45000-0x5bd5ffff] usable ==> reserved <6>[ 0.051745] TSC deadline timer available <6>[ 0.051748] CPU topo: Max. logical packages: 1 <6>[ 0.051748] CPU topo: Max. logical dies: 1 <6>[ 0.051749] CPU topo: Max. dies per package: 1 <6>[ 0.051752] CPU topo: Max. threads per core: 2 <6>[ 0.051753] CPU topo: Num. cores per package: 16 <6>[ 0.051753] CPU topo: Num. threads per package: 22 <6>[ 0.051754] CPU topo: Allowing 22 present CPUs plus 0 hotplug CPUs <6>[ 0.051777] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.051779] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.051780] PM: hibernation: Registered nosave memory: [mem 0x5bd45000-0x5bd5ffff] <6>[ 0.051782] PM: hibernation: Registered nosave memory: [mem 0x5bd9b000-0x5bd9bfff] <6>[ 0.051783] PM: hibernation: Registered nosave memory: [mem 0x60a3f000-0x63ffefff] <6>[ 0.051785] PM: hibernation: Registered nosave memory: [mem 0x64000000-0xffffffff] <6>[ 0.051788] [mem 0x78800000-0xfed1ffff] available for PCI devices <6>[ 0.051789] Booting paravirtualized kernel on bare hardware <6>[ 0.051791] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.051804] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:22 nr_cpu_ids:22 nr_node_ids:1 <6>[ 0.053309] percpu: Embedded 87 pages/cpu s233472 r8192 d114688 u524288 <7>[ 0.053315] pcpu-alloc: s233472 r8192 d114688 u524288 alloc=1*2097152 <7>[ 0.053317] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 <7>[ 0.053320] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 <7>[ 0.053322] pcpu-alloc: [0] 16 17 18 19 [0] 20 21 -- -- <5>[ 0.053342] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <7>[ 0.053441] blacklisting initcall simpledrm_platform_driver_init <5>[ 0.053461] random: crng init done <6>[ 0.056272] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.057688] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.057834] software IO TLB: area num 32. <6>[ 0.069245] Fallback order for Node 0: 0 <6>[ 0.069252] Built 1 zonelists, mobility grouping on. Total pages: 8260062 <6>[ 0.069252] Policy zone: Normal <6>[ 0.069269] mem auto-init: stack:off, heap alloc:on, heap free:off <6>[ 0.069270] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.069273] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) <6>[ 0.070713] stackdepot: allocating space for 8192 stack pools via memblock <4>[ 0.114328] ********************************************************** <4>[ 0.114329] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.114329] ** ** <4>[ 0.114329] ** This system shows unhashed kernel memory addresses ** <4>[ 0.114330] ** via the console, logs, and other interfaces. This ** <4>[ 0.114330] ** might reduce the security of your system. ** <4>[ 0.114330] ** ** <4>[ 0.114330] ** If you see this message and you are not debugging ** <4>[ 0.114331] ** the kernel, report this immediately to your system ** <4>[ 0.114331] ** administrator! ** <4>[ 0.114331] ** ** <4>[ 0.114331] ** Use hash_pointers=always to force this mode off ** <4>[ 0.114331] ** ** <4>[ 0.114332] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.114332] ********************************************************** <6>[ 0.115969] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=22, Nodes=1 <6>[ 0.126786] ftrace: allocating 61093 entries in 240 pages <6>[ 0.126788] ftrace: allocated 240 pages with 4 groups <6>[ 0.128656] Dynamic Preempt: voluntary <6>[ 0.129711] Running RCU self tests <6>[ 0.129712] Running RCU synchronous self tests <6>[ 0.129712] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.129713] rcu: RCU lockdep checking is enabled. <6>[ 0.129713] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=22. <6>[ 0.129714] Trampoline variant of Tasks RCU enabled. <6>[ 0.129714] Rude variant of Tasks RCU enabled. <6>[ 0.129714] Tracing variant of Tasks RCU enabled. <6>[ 0.129715] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.129715] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=22 <6>[ 0.129843] Running RCU synchronous self tests <6>[ 0.129851] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22. <6>[ 0.129856] RCU Tasks Rude: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22. <6>[ 0.129860] RCU Tasks Trace: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22. <6>[ 0.142464] NR_IRQS: 524544, nr_irqs: 2232, preallocated irqs: 16 <6>[ 0.143049] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.143654] Console: colour dummy device 80x25 <6>[ 0.143664] printk: legacy console [tty0] enabled <6>[ 0.144856] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <6>[ 0.144864] ... MAX_LOCKDEP_SUBCLASSES: 8 <6>[ 0.144868] ... MAX_LOCK_DEPTH: 48 <6>[ 0.144871] ... MAX_LOCKDEP_KEYS: 8192 <6>[ 0.144875] ... CLASSHASH_SIZE: 4096 <6>[ 0.144879] ... MAX_LOCKDEP_ENTRIES: 524288 <6>[ 0.144883] ... MAX_LOCKDEP_CHAINS: 524288 <6>[ 0.144886] ... CHAINHASH_SIZE: 262144 <6>[ 0.144890] memory used by lock dependency info: 54145 kB <6>[ 0.144895] memory used for stack traces: 4224 kB <6>[ 0.144899] per task-struct memory footprint: 1920 bytes <6>[ 0.144967] ACPI: Core revision 20250807 <6>[ 0.145964] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 0.146022] APIC: Switch to symmetric I/O mode setup <6>[ 0.146028] DMAR: Host address width 42 <6>[ 0.146032] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 0.146070] DMAR: dmar0: reg_base_addr fc800000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0ef5e <6>[ 0.146078] DMAR: DRHD base: 0x000000fc801000 flags: 0x1 <6>[ 0.146097] DMAR: dmar1: reg_base_addr fc801000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0efde <6>[ 0.146105] DMAR: SATC flags: 0x1 <6>[ 0.146115] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc801000 IOMMU 1 <6>[ 0.146120] DMAR-IR: HPET id 0 under DRHD base 0xfc801000 <6>[ 0.146125] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 0.147828] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 0.152224] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 0.152248] Calibrating delay loop (skipped), value calculated using timer frequency.. 6758.40 BogoMIPS (lpj=3379200) <6>[ 0.152319] CPU0: Thermal monitoring enabled (TM1) <6>[ 0.152326] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 0.152533] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 0.152541] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 0.152552] process: using mwait in idle threads <6>[ 0.152561] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto <6>[ 0.152574] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 0.152581] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 0.152586] VMSCAPE: Mitigation: IBPB before exit to userspace <6>[ 0.152591] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 0.152599] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 0.152616] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 0.152623] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 0.152627] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 0.152632] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 0.152638] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 0.152644] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' <6>[ 0.152651] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 0.152656] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 0.152661] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 0.152666] x86/fpu: xstate_offset[12]: 856, xstate_sizes[12]: 24 <6>[ 0.152671] x86/fpu: Enabled xstate features 0x1a07, context size is 880 bytes, using 'compacted' format. <6>[ 0.153241] Freeing SMP alternatives memory: 56K <6>[ 0.153241] pid_max: default: 32768 minimum: 301 <6>[ 0.153241] landlock: Up and running. <6>[ 0.153241] Yama: becoming mindful. <6>[ 0.153241] AppArmor: AppArmor initialized <6>[ 0.153241] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.153241] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.153241] Running RCU synchronous self tests <6>[ 0.153241] Running RCU synchronous self tests <6>[ 0.153241] smpboot: CPU0: Intel(R) Core(TM) Ultra 7 1003H (family: 0x6, model: 0xaa, stepping: 0x4) <6>[ 0.153241] Performance Events: XSAVE Architectural LBR, PEBS fmt5+-baseline, AnyThread deprecated, Meteorlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 0.153453] core: cpu_core PMU driver: <6>[ 0.153463] ... version: 5 <6>[ 0.153467] ... bit width: 48 <6>[ 0.153471] ... generic counters: 8 <6>[ 0.153475] ... generic bitmap: 00000000000000ff <6>[ 0.153479] ... fixed-purpose counters: 4 <6>[ 0.153483] ... fixed-purpose bitmap: 000000000000000f <6>[ 0.153488] ... value mask: 0000ffffffffffff <6>[ 0.153492] ... max period: 00007fffffffffff <6>[ 0.153497] ... global_ctrl mask: 0001000f000000ff <6>[ 0.153688] signal: max sigframe size: 3632 <6>[ 0.153720] Estimated ratio of average max frequency by base frequency (times 1024): 1445 <6>[ 0.153867] rcu: Hierarchical SRCU implementation. <6>[ 0.153872] rcu: Max phase no-delay instances is 400. <6>[ 0.154050] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level <6>[ 0.156761] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 0.157541] smp: Bringing up secondary CPUs ... <6>[ 0.157982] smpboot: x86: Booting SMP configuration: <6>[ 0.157989] .... node #0, CPUs: #1 #3 #6 #8 #10 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 <6>[ 0.010054] core: cpu_atom PMU driver: <6>[ 0.010054] ... version: 5 <6>[ 0.010054] ... bit width: 48 <6>[ 0.010054] ... generic counters: 8 <6>[ 0.010054] ... generic bitmap: 00000000000000ff <6>[ 0.010054] ... fixed-purpose counters: 3 <6>[ 0.010054] ... fixed-purpose bitmap: 0000000000000007 <6>[ 0.010054] ... value mask: 0000ffffffffffff <6>[ 0.010054] ... max period: 00007fffffffffff <6>[ 0.010054] ... global_ctrl mask: 00000007000000ff <5>[ 0.172440] #2 #4 #5 #7 #9 #11 <6>[ 0.178325] smp: Brought up 1 node, 22 CPUs <6>[ 0.178325] smpboot: Total of 22 processors activated (148684.80 BogoMIPS) <6>[ 0.181624] Memory: 32229804K/33040248K available (25574K kernel code, 5612K rwdata, 9656K rodata, 5720K init, 68176K bss, 780124K reserved, 0K cma-reserved) <6>[ 0.185526] devtmpfs: initialized <6>[ 0.185636] x86/mm: Memory block size: 128MB <6>[ 0.211080] ACPI: PM: Registering ACPI NVS region [mem 0x63db7000-0x63edbfff] (1200128 bytes) <6>[ 0.211973] Running RCU synchronous self tests <6>[ 0.211992] Running RCU synchronous self tests <6>[ 0.212245] Running RCU Tasks wait API self tests <6>[ 0.212270] Running RCU Tasks Rude wait API self tests <6>[ 0.212270] Running RCU Tasks Trace wait API self tests <6>[ 0.225266] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.225475] posixtimers hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 0.225775] futex hash table entries: 8192 (1048576 bytes on 1 NUMA nodes, total 1024 KiB, linear). <6>[ 0.227101] PM: RTC time: 17:40:01, date: 2026-01-15 <6>[ 0.227995] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.229297] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.229709] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.230113] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.230172] audit: initializing netlink subsys (disabled) <5>[ 0.230253] audit: type=2000 audit(1768498801.078:1): state=initialized audit_enabled=0 res=1 <6>[ 0.231056] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.231058] thermal_sys: Registered thermal governor 'bang_bang' <6>[ 0.231064] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.231069] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.231074] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.231120] cpuidle: using governor ladder <6>[ 0.231120] cpuidle: using governor menu <6>[ 0.231566] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 0.232583] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 0.232637] PCI: Using configuration type 1 for base access <6>[ 0.232888] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.234398] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.234398] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 0.234398] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.234398] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.239086] raid6: skipped pq benchmark and selected avx2x4 <6>[ 0.239100] raid6: using avx2x2 recovery algorithm <6>[ 0.240158] fbcon: Taking over console <6>[ 0.240503] ACPI: Added _OSI(Module Device) <6>[ 0.240512] ACPI: Added _OSI(Processor Device) <6>[ 0.240521] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 0.244253] Callback from call_rcu_tasks_trace() invoked. <6>[ 0.883516] ACPI: 28 ACPI AML tables successfully acquired and loaded <6>[ 0.902829] ACPI: EC: EC started <6>[ 0.902845] ACPI: EC: interrupt blocked <6>[ 0.907733] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 0.907744] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 0.964245] Callback from call_rcu_tasks() invoked. <6>[ 1.216169] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.216185] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.280246] ACPI: Interpreter enabled <6>[ 1.280246] ACPI: PM: (supports S0 S4 S5) <6>[ 1.280246] ACPI: Using IOAPIC for interrupt routing <6>[ 1.285813] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 1.285823] PCI: Ignoring E820 reservations for host bridge windows <6>[ 1.326019] ACPI: Enabled 10 GPEs in block 00 to 7F <6>[ 1.326059] ACPI: Enabled 8 GPEs in block 80 to DF <6>[ 1.409712] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 1.711730] ACPI: \_SB_.PC00.RP01.PXP_: New power resource <6>[ 1.745670] ACPI: \_SB_.PC00.RP06.PXP_: New power resource <6>[ 1.759718] ACPI: \_SB_.PC00.RP07.PXP_: New power resource <6>[ 1.776583] ACPI: \_SB_.PC00.RP09.PXP_: New power resource <6>[ 1.783434] ACPI: \_SB_.PC00.RP10.PXP_: New power resource <6>[ 1.790802] ACPI: \_SB_.PC00.RP11.PXP_: New power resource <6>[ 1.803950] ACPI: \_SB_.PC00.RP12.PXP_: New power resource <6>[ 2.111486] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 2.111830] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 2.112142] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 2.232306] ACPI: \_TZ_.FN00: New power resource <6>[ 2.232933] ACPI: \_TZ_.FN01: New power resource <6>[ 2.233862] ACPI: \_TZ_.FN02: New power resource <6>[ 2.234462] ACPI: \_TZ_.FN03: New power resource <6>[ 2.235057] ACPI: \_TZ_.FN04: New power resource <6>[ 2.238247] ACPI: \PIN_: New power resource <6>[ 2.241168] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 2.241186] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] <6>[ 2.244535] acpi PNP0A08:00: _OSC: platform does not support [AER] <6>[ 2.252300] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME PCIeCapability LTR DPC] <6>[ 2.274294] PCI host bridge to bus 0000:00 <6>[ 2.274361] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 2.274378] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 2.274394] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 2.274411] pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff window] <6>[ 2.274426] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x3ffbfffffff window] <6>[ 2.274445] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 2.289703] pci 0000:00:00.0: [8086:7d01] type 00 class 0x060000 conventional PCI endpoint <6>[ 2.290819] pci 0000:00:01.0: [8086:7ecc] type 01 class 0x060400 PCIe Root Port <6>[ 2.290858] pci 0000:00:01.0: PCI bridge to [bus 01] <6>[ 2.290872] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] <6>[ 2.290886] pci 0000:00:01.0: bridge window [mem 0x8c100000-0x8c1fffff] <6>[ 2.291016] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold <6>[ 2.291117] pci 0000:00:01.0: PTM enabled (root), 4ns granularity <6>[ 2.301246] pci 0000:00:02.0: [8086:7d55] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint <6>[ 2.301246] pci 0000:00:02.0: BAR 0 [mem 0x5018000000-0x5018ffffff 64bit pref] <6>[ 2.301246] pci 0000:00:02.0: BAR 2 [mem 0x4000000000-0x400fffffff 64bit pref] <6>[ 2.301246] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics <6>[ 2.301246] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 2.301247] pci 0000:00:02.0: PME# supported from D0 D3hot <6>[ 2.301247] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x00ffffff 64bit pref] <6>[ 2.301247] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x06ffffff 64bit pref]: contains BAR 0 for 7 VFs <6>[ 2.303584] pci 0000:00:04.0: [8086:7d03] type 00 class 0x118000 conventional PCI endpoint <6>[ 2.303638] pci 0000:00:04.0: BAR 0 [mem 0x501a280000-0x501a29ffff 64bit] <6>[ 2.306338] pci 0000:00:05.0: [8086:7d19] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint <6>[ 2.306379] pci 0000:00:05.0: BAR 0 [mem 0x5019000000-0x5019ffffff 64bit] <6>[ 2.306398] pci 0000:00:05.0: enabling Extended Tags <6>[ 2.308396] pci 0000:00:06.0: [8086:7ecb] type 01 class 0x060400 PCIe Root Port <6>[ 2.308523] pci 0000:00:06.0: PCI bridge to [bus 02] <6>[ 2.308585] pci 0000:00:06.0: bridge window [mem 0x8c000000-0x8c0fffff] <6>[ 2.308970] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold <6>[ 2.309168] pci 0000:00:06.0: PTM enabled (root), 4ns granularity <6>[ 2.319067] pci 0000:00:07.0: [8086:7ec6] type 01 class 0x060400 PCIe Root Port <6>[ 2.319115] pci 0000:00:07.0: PCI bridge to [bus 03-2c] <6>[ 2.319131] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff] <6>[ 2.319152] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 2.319273] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 2.320243] pci 0000:00:07.0: PTM enabled (root), 4ns granularity <6>[ 2.328299] pci 0000:00:07.3: [8086:7ec7] type 01 class 0x060400 PCIe Root Port <6>[ 2.328340] pci 0000:00:07.3: PCI bridge to [bus 2d-56] <6>[ 2.328356] pci 0000:00:07.3: bridge window [mem 0x80000000-0x85ffffff] <6>[ 2.328377] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 2.328494] pci 0000:00:07.3: PME# supported from D0 D3hot D3cold <6>[ 2.328577] pci 0000:00:07.3: PTM enabled (root), 4ns granularity <6>[ 2.337229] pci 0000:00:08.0: [8086:7e4c] type 00 class 0x088000 conventional PCI endpoint <6>[ 2.337350] pci 0000:00:08.0: BAR 0 [mem 0x501a2e3000-0x501a2e3fff 64bit] <6>[ 2.338263] pci 0000:00:0a.0: [8086:7d0d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint <6>[ 2.338303] pci 0000:00:0a.0: BAR 0 [mem 0x501a240000-0x501a27ffff 64bit] <6>[ 2.338322] pci 0000:00:0a.0: enabling Extended Tags <6>[ 2.338723] pci 0000:00:0b.0: [8086:7d1d] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint <6>[ 2.338765] pci 0000:00:0b.0: BAR 0 [mem 0x5010000000-0x5017ffffff 64bit] <6>[ 2.338780] pci 0000:00:0b.0: BAR 4 [mem 0x501a2e2000-0x501a2e2fff 64bit] <6>[ 2.340459] pci 0000:00:0d.0: [8086:7ec0] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.340506] pci 0000:00:0d.0: BAR 0 [mem 0x501a2c0000-0x501a2cffff 64bit] <6>[ 2.340576] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 2.342714] pci 0000:00:0d.3: [8086:7ec3] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.342826] pci 0000:00:0d.3: BAR 0 [mem 0x501a200000-0x501a23ffff 64bit] <6>[ 2.342835] pci 0000:00:0d.3: BAR 2 [mem 0x501a2e1000-0x501a2e1fff 64bit] <6>[ 2.342893] pci 0000:00:0d.3: supports D1 D2 <6>[ 2.342897] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.344499] pci 0000:00:12.0: [8086:7e45] type 00 class 0x070000 conventional PCI endpoint <6>[ 2.344539] pci 0000:00:12.0: BAR 0 [mem 0x501a2b0000-0x501a2bffff 64bit] <6>[ 2.344591] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 2.347620] pci 0000:00:14.0: [8086:7e7d] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.347664] pci 0000:00:14.0: BAR 0 [mem 0x501a2a0000-0x501a2affff 64bit] <6>[ 2.347723] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 2.350300] pci 0000:00:14.2: [8086:7e7f] type 00 class 0x050000 conventional PCI endpoint <6>[ 2.350349] pci 0000:00:14.2: BAR 0 [mem 0x501a2d4000-0x501a2d7fff 64bit] <6>[ 2.350358] pci 0000:00:14.2: BAR 2 [mem 0x501a2e0000-0x501a2e0fff 64bit] <6>[ 2.350697] pci 0000:00:15.0: [8086:7e78] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.350775] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.361668] pci 0000:00:15.1: [8086:7e79] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.361730] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.372661] pci 0000:00:15.2: [8086:7e7a] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.372717] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.383667] pci 0000:00:15.3: [8086:7e7b] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.383721] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.394785] pci 0000:00:16.0: [8086:7e70] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.394839] pci 0000:00:16.0: BAR 0 [mem 0x501a2db000-0x501a2dbfff 64bit] <6>[ 2.394902] pci 0000:00:16.0: PME# supported from D3hot <6>[ 2.397782] pci 0000:00:16.3: [8086:7e73] type 00 class 0x070002 conventional PCI endpoint <6>[ 2.397824] pci 0000:00:16.3: BAR 0 [io 0x4020-0x4027] <6>[ 2.397830] pci 0000:00:16.3: BAR 1 [mem 0x8c261000-0x8c261fff] <6>[ 2.398094] pci 0000:00:19.0: [8086:7e50] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.398148] pci 0000:00:19.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.408788] pci 0000:00:19.1: [8086:7e51] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.408842] pci 0000:00:19.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.419724] pci 0000:00:1f.0: [8086:7e02] type 00 class 0x060100 conventional PCI endpoint <6>[ 2.421308] pci 0000:00:1f.3: [8086:7e28] type 00 class 0x040100 conventional PCI endpoint <6>[ 2.421424] pci 0000:00:1f.3: BAR 0 [mem 0x501a2d0000-0x501a2d3fff 64bit] <6>[ 2.421438] pci 0000:00:1f.3: BAR 4 [mem 0x501a000000-0x501a1fffff 64bit] <6>[ 2.421552] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 2.422062] pci 0000:00:1f.4: [8086:7e22] type 00 class 0x0c0500 conventional PCI endpoint <6>[ 2.422112] pci 0000:00:1f.4: BAR 0 [mem 0x501a2d8000-0x501a2d80ff 64bit] <6>[ 2.422123] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] <6>[ 2.423584] pci 0000:00:1f.5: [8086:7e23] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.423688] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] <6>[ 2.423947] pci 0000:00:1f.6: [8086:550a] type 00 class 0x020000 conventional PCI endpoint <6>[ 2.424028] pci 0000:00:1f.6: BAR 0 [mem 0x8c240000-0x8c25ffff] <6>[ 2.424111] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold <6>[ 2.425898] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint <6>[ 2.425989] pci 0000:01:00.0: BAR 0 [mem 0x8c180000-0x8c19ffff] <6>[ 2.425996] pci 0000:01:00.0: BAR 1 [mem 0x8c100000-0x8c17ffff] <6>[ 2.426003] pci 0000:01:00.0: BAR 2 [io 0x3000-0x301f] <6>[ 2.426010] pci 0000:01:00.0: BAR 3 [mem 0x8c1a0000-0x8c1a3fff] <6>[ 2.426022] pci 0000:01:00.0: ROM [mem 0xfffc0000-0xffffffff pref] <6>[ 2.426170] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold <6>[ 2.426896] pci 0000:00:01.0: PCI bridge to [bus 01] <6>[ 2.427540] pci 0000:02:00.0: [2646:2263] type 00 class 0x010802 PCIe Endpoint <6>[ 2.427602] pci 0000:02:00.0: BAR 0 [mem 0x8c000000-0x8c003fff 64bit] <6>[ 2.428724] pci 0000:00:06.0: PCI bridge to [bus 02] <6>[ 2.428920] pci 0000:00:07.0: PCI bridge to [bus 03-2c] <6>[ 2.429119] pci 0000:00:07.3: PCI bridge to [bus 2d-56] <6>[ 2.866241] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1) <6>[ 2.866241] Low-power S0 idle used by default for system suspend <6>[ 2.983960] ACPI: EC: interrupt unblocked <6>[ 2.983975] ACPI: EC: event unblocked <6>[ 2.984269] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 2.984269] ACPI: EC: GPE=0x6e <6>[ 2.984269] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 2.984269] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 2.985699] iommu: Default domain type: Translated <6>[ 2.985699] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 2.989631] SCSI subsystem initialized <7>[ 2.989743] libata version 3.00 loaded. <6>[ 2.989743] ACPI: bus type USB registered <6>[ 2.990359] usbcore: registered new interface driver usbfs <6>[ 2.990452] usbcore: registered new interface driver hub <6>[ 2.990567] usbcore: registered new device driver usb <6>[ 2.990842] pps_core: LinuxPPS API ver. 1 registered <6>[ 2.990851] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 2.990903] PTP clock support registered <6>[ 2.991357] EDAC MC: Ver: 3.0.0 <6>[ 2.993287] efivars: Registered efivars operations <6>[ 2.995744] NetLabel: Initializing <6>[ 2.995755] NetLabel: domain hash size = 128 <6>[ 2.995764] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO <6>[ 2.995904] NetLabel: unlabeled traffic allowed by default <6>[ 2.995938] mctp: management component transport protocol core <6>[ 2.995949] NET: Registered PF_MCTP protocol family <6>[ 2.996044] PCI: Using ACPI for IRQ routing <7>[ 3.013759] PCI: pci_cache_line_size set to 64 bytes <6>[ 3.014022] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window <7>[ 3.014215] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 3.014229] e820: reserve RAM buffer [mem 0x5bd45000-0x5bffffff] <7>[ 3.014234] e820: reserve RAM buffer [mem 0x5bd9b000-0x5bffffff] <7>[ 3.014239] e820: reserve RAM buffer [mem 0x60a3f000-0x63ffffff] <6>[ 3.014755] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 3.014755] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 3.014755] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 3.014755] vgaarb: loaded <6>[ 3.023646] clocksource: Switched to clocksource tsc-early <5>[ 3.032126] VFS: Disk quotas dquot_6.6.0 <6>[ 3.032172] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 3.034282] AppArmor: AppArmor Filesystem Enabled <6>[ 3.034635] pnp: PnP ACPI init <6>[ 3.036218] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 3.036247] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 3.037245] system 00:01: [io 0x1854-0x1857] has been reserved <6>[ 3.039782] system 00:03: [io 0x06a4] has been reserved <6>[ 3.039800] system 00:03: [io 0x06a0] has been reserved <4>[ 3.076044] pnp 00:04: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] <4>[ 3.076072] pnp 00:04: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] <6>[ 3.076325] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 3.076344] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 3.076364] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved <6>[ 3.076382] system 00:04: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 3.076401] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 3.076417] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 3.085887] system 00:05: [io 0x2000-0x20fe] has been reserved <4>[ 3.088666] pnp 00:07: disabling [mem 0x00000000-0x0009cfff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] <6>[ 3.093383] pnp: PnP ACPI: found 8 devices <6>[ 3.111931] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 3.112454] NET: Registered PF_INET protocol family <6>[ 3.112776] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 3.116700] tcp_listen_portaddr_hash hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 3.116934] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 3.117234] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 3.118543] TCP bind hash table entries: 65536 (order: 12, 9437184 bytes, vmalloc hugepage) <6>[ 3.120005] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 3.120786] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 3.121843] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 3.123005] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 3.123086] pci 0000:01:00.0: ROM [mem 0xfffc0000-0xffffffff pref]: can't claim; no compatible bridge window <6>[ 3.123111] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2 <6>[ 3.123168] pci 0000:00:02.0: VF BAR 0 [mem 0x501b000000-0x5021ffffff 64bit pref]: assigned <6>[ 3.123188] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]: assigned <6>[ 3.123200] pci 0000:00:07.3: bridge window [io 0x6000-0x6fff]: assigned <6>[ 3.123211] pci 0000:00:15.0: BAR 0 [mem 0x501a2d9000-0x501a2d9fff 64bit]: assigned <6>[ 3.123235] pci 0000:00:15.1: BAR 0 [mem 0x501a2da000-0x501a2dafff 64bit]: assigned <6>[ 3.123257] pci 0000:00:15.2: BAR 0 [mem 0x501a2dc000-0x501a2dcfff 64bit]: assigned <6>[ 3.123279] pci 0000:00:15.3: BAR 0 [mem 0x501a2dd000-0x501a2ddfff 64bit]: assigned <6>[ 3.123301] pci 0000:00:19.0: BAR 0 [mem 0x501a2de000-0x501a2defff 64bit]: assigned <6>[ 3.123322] pci 0000:00:19.1: BAR 0 [mem 0x501a2df000-0x501a2dffff 64bit]: assigned <6>[ 3.123344] pci 0000:00:1f.5: BAR 0 [mem 0x8c200000-0x8c200fff]: assigned <6>[ 3.123382] pci 0000:01:00.0: ROM [mem 0x8c1c0000-0x8c1fffff pref]: assigned <6>[ 3.123395] pci 0000:00:01.0: PCI bridge to [bus 01] <6>[ 3.123406] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] <6>[ 3.123420] pci 0000:00:01.0: bridge window [mem 0x8c100000-0x8c1fffff] <6>[ 3.123442] pci 0000:00:06.0: PCI bridge to [bus 02] <6>[ 3.123495] pci 0000:00:06.0: bridge window [mem 0x8c000000-0x8c0fffff] <6>[ 3.123556] pci 0000:00:07.0: PCI bridge to [bus 03-2c] <6>[ 3.123613] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff] <6>[ 3.123625] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff] <6>[ 3.123638] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 3.123654] pci 0000:00:07.3: PCI bridge to [bus 2d-56] <6>[ 3.123674] pci 0000:00:07.3: bridge window [io 0x6000-0x6fff] <6>[ 3.123686] pci 0000:00:07.3: bridge window [mem 0x80000000-0x85ffffff] <6>[ 3.123699] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 3.123716] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 3.123726] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 3.123736] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 3.123746] pci_bus 0000:00: resource 7 [mem 0x80000000-0xbfffffff window] <6>[ 3.123757] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x3ffbfffffff window] <6>[ 3.123769] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] <6>[ 3.123778] pci_bus 0000:01: resource 1 [mem 0x8c100000-0x8c1fffff] <6>[ 3.123788] pci_bus 0000:02: resource 1 [mem 0x8c000000-0x8c0fffff] <6>[ 3.123798] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff] <6>[ 3.123807] pci_bus 0000:03: resource 1 [mem 0x86000000-0x8bffffff] <6>[ 3.123817] pci_bus 0000:03: resource 2 [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 3.123829] pci_bus 0000:2d: resource 0 [io 0x6000-0x6fff] <6>[ 3.123838] pci_bus 0000:2d: resource 1 [mem 0x80000000-0x85ffffff] <6>[ 3.123848] pci_bus 0000:2d: resource 2 [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 3.125824] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 3.129042] PCI: CLS 64 bytes, default 64 <6>[ 3.129197] DMAR: No RMRR found <6>[ 3.129212] DMAR: No ATSR found <6>[ 3.129219] DMAR: dmar0: Using Queued invalidation <6>[ 3.129230] DMAR: dmar1: Using Queued invalidation <6>[ 3.130504] pci 0000:00:02.0: Adding to iommu group 0 <6>[ 3.132477] pci 0000:00:00.0: Adding to iommu group 1 <6>[ 3.132611] pci 0000:00:01.0: Adding to iommu group 2 <6>[ 3.132712] pci 0000:00:04.0: Adding to iommu group 3 <6>[ 3.132811] pci 0000:00:05.0: Adding to iommu group 4 <6>[ 3.132938] pci 0000:00:06.0: Adding to iommu group 5 <6>[ 3.133066] pci 0000:00:07.0: Adding to iommu group 6 <6>[ 3.133187] pci 0000:00:07.3: Adding to iommu group 7 <6>[ 3.133295] pci 0000:00:08.0: Adding to iommu group 8 <6>[ 3.133401] pci 0000:00:0a.0: Adding to iommu group 9 <6>[ 3.133498] pci 0000:00:0b.0: Adding to iommu group 10 <6>[ 3.133621] pci 0000:00:0d.0: Adding to iommu group 11 <6>[ 3.133693] pci 0000:00:0d.3: Adding to iommu group 11 <6>[ 3.133812] pci 0000:00:12.0: Adding to iommu group 12 <6>[ 3.133931] pci 0000:00:14.0: Adding to iommu group 13 <6>[ 3.134005] pci 0000:00:14.2: Adding to iommu group 13 <6>[ 3.134158] pci 0000:00:15.0: Adding to iommu group 14 <6>[ 3.134230] pci 0000:00:15.1: Adding to iommu group 14 <6>[ 3.134303] pci 0000:00:15.2: Adding to iommu group 14 <6>[ 3.134379] pci 0000:00:15.3: Adding to iommu group 14 <6>[ 3.134502] pci 0000:00:16.0: Adding to iommu group 15 <6>[ 3.134580] pci 0000:00:16.3: Adding to iommu group 15 <6>[ 3.134701] pci 0000:00:19.0: Adding to iommu group 16 <6>[ 3.134774] pci 0000:00:19.1: Adding to iommu group 16 <6>[ 3.134936] pci 0000:00:1f.0: Adding to iommu group 17 <6>[ 3.135010] pci 0000:00:1f.3: Adding to iommu group 17 <6>[ 3.135093] pci 0000:00:1f.4: Adding to iommu group 17 <6>[ 3.135168] pci 0000:00:1f.5: Adding to iommu group 17 <6>[ 3.135242] pci 0000:00:1f.6: Adding to iommu group 17 <6>[ 3.135360] pci 0000:01:00.0: Adding to iommu group 18 <6>[ 3.135483] pci 0000:02:00.0: Adding to iommu group 19 <6>[ 3.162402] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 3.162417] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 3.162427] software IO TLB: mapped [mem 0x0000000056ddd000-0x000000005addd000] (64MB) <6>[ 3.166238] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 3.166580] clocksource: Switched to clocksource tsc <6>[ 3.166770] platform rtc_cmos: registered platform RTC device (no PNP device found) <5>[ 3.177686] Initialise system trusted keyrings <5>[ 3.177780] Key type blacklist registered <6>[ 3.178119] workingset: timestamp_bits=36 max_order=23 bucket_order=0 <6>[ 3.190856] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 3.190997] ntfs3: Enabled Linux POSIX ACLs support <6>[ 3.191006] ntfs3: Read-only LZX/Xpress compression included <5>[ 3.192546] integrity: Platform Keyring initialized <5>[ 3.192574] integrity: Machine keyring initialized <6>[ 3.200504] xor: automatically using best checksumming function avx <5>[ 3.200518] Key type asymmetric registered <5>[ 3.200532] Asymmetric key parser 'x509' registered <6>[ 3.200682] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) <6>[ 3.201048] io scheduler mq-deadline registered <6>[ 3.204684] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 3.207076] pcieport 0000:00:01.0: PME: Signaling with IRQ 122 <6>[ 3.209352] pcieport 0000:00:06.0: PME: Signaling with IRQ 123 <6>[ 3.211378] pcieport 0000:00:07.0: PME: Signaling with IRQ 124 <6>[ 3.213201] pcieport 0000:00:07.3: PME: Signaling with IRQ 125 <6>[ 3.215701] ACPI: AC: AC Adapter [ADP1] (on-line) <6>[ 3.216157] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 3.216553] ACPI: button: Lid Switch [LID0] <6>[ 3.216959] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 3.217227] ACPI: button: Sleep Button [SLPB] <6>[ 3.217532] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 3.217776] ACPI: button: Power Button [PWRB] <6>[ 3.322959] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 3.322967] ACPI: thermal: Thermal Zone [TZ00] (36 C) <6>[ 3.324130] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled <6>[ 3.324502] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 3.326254] ACPI: battery: Slot [BAT0] (battery present) <6>[ 3.346932] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 3.359521] serial 0000:00:12.0: enabling device (0000 -> 0002) <6>[ 3.361317] serial 0000:00:16.3: enabling device (0001 -> 0003) <6>[ 3.383853] 0000:00:16.3: ttyS4 at I/O 0x4020 (irq = 19, base_baud = 115200) is a 16550A <5>[ 3.385384] hpet_acpi_add: no address or irqs in _CRS <6>[ 3.385467] Linux agpgart interface v0.103 <6>[ 3.412643] ACPI: bus type drm_connector registered <7>[ 3.413840] initcall simpledrm_platform_driver_init blacklisted <6>[ 3.435772] loop: module loaded <6>[ 3.467448] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 3.580153] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 3.714175] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 3.857978] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <6>[ 3.990239] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002) <6>[ 4.119450] intel-lpss 0000:00:19.1: enabling device (0000 -> 0002) <5>[ 4.266334] Key type psk registered <6>[ 4.268070] nvme 0000:02:00.0: platform quirk: setting simple suspend <6>[ 4.268832] tun: Universal TUN/TAP device driver, 1.6 <6>[ 4.269717] nvme nvme0: pci function 0000:02:00.0 <6>[ 4.270024] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 4.270123] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 4.271888] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 4.273490] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 4.273508] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 4.273521] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 4.273819] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.19 <6>[ 4.273833] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.273840] usb usb1: Product: xHCI Host Controller <6>[ 4.273844] usb usb1: Manufacturer: Linux 6.19.0-rc5-CI_DRM_17821-g733664f1edf3+ xhci-hcd <6>[ 4.273851] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 4.274624] hub 1-0:1.0: USB hub found <6>[ 4.274704] hub 1-0:1.0: 1 port detected <4>[ 4.276313] nvme nvme0: missing or invalid SUBNQN field. <6>[ 4.277485] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.19 <6>[ 4.277495] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.277502] usb usb2: Product: xHCI Host Controller <6>[ 4.277507] usb usb2: Manufacturer: Linux 6.19.0-rc5-CI_DRM_17821-g733664f1edf3+ xhci-hcd <6>[ 4.277513] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 4.278250] hub 2-0:1.0: USB hub found <6>[ 4.278304] hub 2-0:1.0: 4 ports detected <6>[ 4.288999] nvme nvme0: 15/0/0 default/read/poll queues <6>[ 4.299593] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 4.299615] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 4.301195] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 4.301266] nvme0n1: p1 p2 <6>[ 4.302668] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 4.302682] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 4.302694] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 4.302828] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.19 <6>[ 4.302836] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.302843] usb usb3: Product: xHCI Host Controller <6>[ 4.302847] usb usb3: Manufacturer: Linux 6.19.0-rc5-CI_DRM_17821-g733664f1edf3+ xhci-hcd <6>[ 4.302854] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 4.304040] hub 3-0:1.0: USB hub found <6>[ 4.304081] hub 3-0:1.0: 12 ports detected <6>[ 4.329078] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.19 <6>[ 4.329087] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.329094] usb usb4: Product: xHCI Host Controller <6>[ 4.329099] usb usb4: Manufacturer: Linux 6.19.0-rc5-CI_DRM_17821-g733664f1edf3+ xhci-hcd <6>[ 4.329105] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 4.329599] hub 4-0:1.0: USB hub found <6>[ 4.329630] hub 4-0:1.0: 2 ports detected <6>[ 4.334649] usbcore: registered new interface driver usb-storage <6>[ 4.334857] usbcore: registered new interface driver usbserial_generic <6>[ 4.334952] usbserial: USB Serial support registered for generic <6>[ 4.335044] usbcore: registered new interface driver ftdi_sio <6>[ 4.335102] usbserial: USB Serial support registered for FTDI USB Serial Device <6>[ 4.335190] usbcore: registered new interface driver pl2303 <6>[ 4.335240] usbserial: USB Serial support registered for pl2303 <6>[ 4.335390] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 4.335402] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 5.036309] i8042: Can't read CTR while initializing i8042 <3>[ 5.036320] i8042 i8042: probe with driver i8042 failed with error -5 <6>[ 5.037021] mousedev: PS/2 mouse device common for all mice <6>[ 5.038555] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 5.040479] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 5.040658] rtc_cmos rtc_cmos: setting system clock to 2026-01-15T17:40:05 UTC (1768498805) <6>[ 5.040848] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 5.040904] i2c_dev: i2c /dev entries driver <6>[ 5.045789] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 5.045807] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 5.045820] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. <6>[ 5.045863] device-mapper: uevent: version 1.0.3 <6>[ 5.046288] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev <6>[ 5.046309] intel_pstate: Intel P-state driver initializing <6>[ 5.057760] intel_pstate: HWP enabled <6>[ 5.057768] sdhci: Secure Digital Host Controller Interface driver <6>[ 5.057773] sdhci: Copyright(c) Pierre Ossman <6>[ 5.057897] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 5.061257] drop_monitor: Initializing network drop monitor service <6>[ 5.061474] NET: Registered PF_INET6 protocol family <6>[ 5.062746] Segment Routing with IPv6 <6>[ 5.062786] In-situ OAM (IOAM) with IPv6 <6>[ 5.062836] NET: Registered PF_PACKET protocol family <5>[ 5.063092] Key type dns_resolver registered <4>[ 5.075968] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 5.077303] microcode: Current revision: 0x0000001c <6>[ 5.078886] IPI shorthand broadcast: enabled <6>[ 5.093408] sched_clock: Marking stable (5084002438, 9054348)->(5164484364, -71427578) <6>[ 5.095156] registered taskstats version 1 <5>[ 5.098628] Loading compiled-in X.509 certificates <6>[ 5.147165] Demotion targets for Node 0: null <6>[ 5.147471] kmemleak: Kernel memory leak detector initialized (mem pool available: 14930) <6>[ 5.147483] kmemleak: Automatic memory scanning thread started <5>[ 5.147749] Key type .fscrypt registered <5>[ 5.147754] Key type fscrypt-provisioning registered <6>[ 5.151300] Btrfs loaded, zoned=yes, fsverity=yes <5>[ 5.151420] Key type trusted registered <5>[ 5.157427] Key type encrypted registered <6>[ 5.157458] AppArmor: AppArmor sha256 policy hashing enabled <5>[ 5.157491] Loading compiled-in module X.509 certificates <5>[ 5.158142] Loaded X.509 cert 'Build time autogenerated kernel key: 6cb54436007e09e8b80608c52d2a5ae421e6b5b9' <6>[ 5.158152] ima: Allocated hash algorithm: sha256 <6>[ 5.199401] ima: No architecture policies found <6>[ 5.199562] evm: Initialising EVM extended attributes: <6>[ 5.199569] evm: security.selinux <6>[ 5.199574] evm: security.SMACK64 <6>[ 5.199578] evm: security.SMACK64EXEC <6>[ 5.199583] evm: security.SMACK64TRANSMUTE <6>[ 5.199589] evm: security.SMACK64MMAP <6>[ 5.199593] evm: security.apparmor <6>[ 5.199598] evm: security.ima <6>[ 5.199602] evm: security.capability <6>[ 5.199606] evm: HMAC attrs: 0x1 <6>[ 5.202398] PM: Magic number: 10:33:694 <6>[ 5.202645] netconsole: network logging started <6>[ 5.203355] RAS: Correctable Errors collector initialized. <6>[ 5.203531] clk: Disabling unused clocks <6>[ 5.203543] PM: genpd: Disabling unused power domains <4>[ 5.204823] check access for rdinit=/init failed: -2, ignoring <6>[ 5.204830] md: Waiting for all devices to be available before autodetect <6>[ 5.204835] md: If you don't use raid, use raid=noautodetect <6>[ 5.204839] md: Autodetecting RAID arrays. <6>[ 5.205882] md: autorun ... <6>[ 5.205887] md: ... autorun DONE. <6>[ 5.227232] EXT4-fs (nvme0n1p2): mounted filesystem 8b63c25a-3023-4306-9b91-4e52c14811e3 ro with ordered data mode. Quota mode: none. <6>[ 5.227298] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 5.227704] devtmpfs: mounted <6>[ 5.246591] Freeing unused decrypted memory: 2036K <6>[ 5.247828] Freeing unused kernel image (initmem) memory: 5720K <6>[ 5.247856] Write protecting the kernel read-only data: 36864k <6>[ 5.248941] Freeing unused kernel image (text/rodata gap) memory: 1048K <6>[ 5.249394] Freeing unused kernel image (rodata/data gap) memory: 584K <6>[ 5.255591] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 5.276150] Run /sbin/init as init process <7>[ 5.276156] with arguments: <7>[ 5.276157] /sbin/init <7>[ 5.276158] with environment: <7>[ 5.276159] HOME=/ <7>[ 5.276159] TERM=linux <7>[ 5.340805] systemd[1]: Inserted module 'autofs4' <7>[ 5.377039] systemd[1]: systemd 255.4-1ubuntu8.8 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <7>[ 5.377080] systemd[1]: Detected architecture x86-64. <7>[ 5.378027] systemd[1]: Hostname set to . <7>[ 5.620006] systemd[1]: Queued start job for default target graphical.target. <7>[ 5.660076] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. <7>[ 5.661998] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. <7>[ 5.663830] systemd[1]: Created slice user.slice - User and Session Slice. <7>[ 5.664112] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. <7>[ 5.664822] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. <7>[ 5.664959] systemd[1]: Expecting device dev-disk-by\x2duuid-3868\x2dBF9D.device - /dev/disk/by-uuid/3868-BF9D... <7>[ 5.665065] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. <7>[ 5.665161] systemd[1]: Reached target slices.target - Slice Units. <7>[ 5.665237] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. <7>[ 5.665312] systemd[1]: Reached target snapd.mounts.target - Mounted snaps. <7>[ 5.665391] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. <7>[ 5.665657] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. <7>[ 5.666077] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. <7>[ 5.666395] systemd[1]: Listening on multipathd.socket - multipathd control socket. <7>[ 5.666752] systemd[1]: Listening on syslog.socket - Syslog Socket. <7>[ 5.667047] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. <7>[ 5.667303] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. <7>[ 5.667652] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). <7>[ 5.668019] systemd[1]: Listening on systemd-journald.socket - Journal Socket. <7>[ 5.668345] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. <7>[ 5.668558] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 5.668884] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. <7>[ 5.669198] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. <7>[ 5.672501] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... <7>[ 5.675588] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... <7>[ 5.679125] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... <7>[ 5.684563] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... <7>[ 5.692740] systemd[1]: Starting systemd-journald.service - Journal Service... <7>[ 5.695967] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... <7>[ 5.699728] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... <7>[ 5.705406] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... <7>[ 5.709176] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... <7>[ 5.712994] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... <7>[ 5.717277] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... <7>[ 5.719297] systemd-journald[309]: Collecting audit messages is disabled. <7>[ 5.721443] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... <7>[ 5.725276] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... <7>[ 5.728880] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... <7>[ 5.731746] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics... <7>[ 5.731905] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). <7>[ 5.735279] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... <7>[ 5.739350] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... <7>[ 5.739428] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 5.739497] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <6>[ 5.741279] pstore: Using crash dump compression: deflate <7>[ 5.743480] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... <6>[ 5.743940] pstore: Registered efi_pstore as persistent store backend <6>[ 5.746627] fuse: init (API version 7.45) <7>[ 5.748944] systemd[1]: Started systemd-journald.service - Journal Service. <6>[ 5.878100] EXT4-fs (nvme0n1p2): re-mounted 8b63c25a-3023-4306-9b91-4e52c14811e3 r/w. <6>[ 5.904112] Adding 8388604k swap on /swap.img. Priority:-1 extents:66 across:173604864k SS <7>[ 5.920004] systemd-journald[309]: Received client request to flush runtime journal. <7>[ 5.936766] systemd-journald[309]: /var/log/journal/0337b68cee5945d88e67c05e0be7343f/system.journal: Journal file uses a different sequence number ID, rotating. <7>[ 5.936779] systemd-journald[309]: Rotating system journal. <4>[ 6.678687] nvme nvme0: using unchecked data buffer <6>[ 6.798932] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002) <6>[ 6.839247] intel_pmc_ssram_telemetry 0000:00:14.2: enabling device (0000 -> 0002) <6>[ 6.865913] input: Intel HID events as /devices/platform/INTC1077:00/input/input3 <6>[ 6.886898] intel-hid INTC1077:00: platform supports 5 button array <6>[ 6.897289] input: Intel HID 5 button array as /devices/platform/INTC1077:00/input/input4 <3>[ 6.959893] int3472-tps68470 i2c-INT3472:0d: TPS68470 init error -121 <3>[ 6.960168] int3472-tps68470 i2c-INT3472:0d: probe with driver int3472-tps68470 failed with error -121 <4>[ 7.056095] resource: resource sanity check: requesting [mem 0x00000000fedc0000-0x00000000fedcffff], which spans more than pnp 00:04 [mem 0xfedc0000-0xfedc7fff] <4>[ 7.056124] caller igen6_probe+0x190/0x9ea [igen6_edac] mapping multiple BARs <6>[ 7.077709] EDAC MC0: Giving out device to module igen6_edac controller Intel_client_SoC MC#0: DEV 0000:00:00.0 (INTERRUPT) <6>[ 7.077827] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 7.077831] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 7.078152] ACPI: bus type thunderbolt registered <6>[ 7.081009] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode <6>[ 7.085675] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002) <6>[ 7.102447] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_37xx_v0.0.bin, version: 20230726*MTL_CLIENT_SILICON-release*2101*ci_tag_mtl_pv_vpu_rc_20230726_2101*648a666b8b9 <6>[ 7.102455] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS <6>[ 7.104775] EDAC MC1: Giving out device to module igen6_edac controller Intel_client_SoC MC#1: DEV 0000:00:00.0 (INTERRUPT) <6>[ 7.104845] pci 0000:00:08.0: Setting to D3hot <6>[ 7.109016] EDAC igen6: v2.5.1 <6>[ 7.116131] pci 0000:00:05.0: Setting to D3hot <6>[ 7.122140] idma64 idma64.0: Found Intel integrated DMA 64-bit <6>[ 7.124331] i801_smbus 0000:00:1f.4: SPD Write Disable is set <6>[ 7.124449] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt <6>[ 7.128805] intel_pmc_core INT33A1:00: initialized <6>[ 7.129140] idma64 idma64.1: Found Intel integrated DMA 64-bit <6>[ 7.169292] idma64 idma64.2: Found Intel integrated DMA 64-bit <6>[ 7.195682] idma64 idma64.3: Found Intel integrated DMA 64-bit <5>[ 7.200840] audit: type=1400 audit(1768498807.658:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=563 comm="apparmor_parser" <5>[ 7.201332] audit: type=1400 audit(1768498807.659:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=560 comm="apparmor_parser" <5>[ 7.201606] audit: type=1400 audit(1768498807.659:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=561 comm="apparmor_parser" <5>[ 7.202263] audit: type=1400 audit(1768498807.660:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=564 comm="apparmor_parser" <5>[ 7.203377] audit: type=1400 audit(1768498807.661:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=565 comm="apparmor_parser" <5>[ 7.203701] audit: type=1400 audit(1768498807.661:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=566 comm="apparmor_parser" <5>[ 7.205762] audit: type=1400 audit(1768498807.663:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=567 comm="apparmor_parser" <5>[ 7.208862] audit: type=1400 audit(1768498807.666:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=568 comm="apparmor_parser" <5>[ 7.211265] audit: type=1400 audit(1768498807.669:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=569 comm="apparmor_parser" <5>[ 7.211952] audit: type=1400 audit(1768498807.669:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=570 comm="apparmor_parser" <6>[ 7.250987] i2c i2c-6: Successfully instantiated SPD at 0x54 <6>[ 7.252560] i2c i2c-6: Successfully instantiated SPD at 0x56 <6>[ 7.273598] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0 <6>[ 7.292802] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 7.292813] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 7.292816] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 7.292818] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules <6>[ 7.292819] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 7.307841] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock <6>[ 7.346053] proc_thermal_pci 0000:00:04.0: enabling device (0000 -> 0002) <6>[ 7.356926] intel_rapl_common: Found RAPL domain package <6>[ 7.414100] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88 <6>[ 7.414108] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection <6>[ 7.414228] e1000e 0000:00:1f.6 eth0: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF <6>[ 7.415183] e1000e 0000:01:00.0: Disabling ASPM L1 <6>[ 7.415332] e1000e 0000:01:00.0: enabling device (0000 -> 0002) <6>[ 7.418367] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode <6>[ 7.489168] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock <6>[ 7.536210] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 7.539659] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.584336] e1000e 0000:01:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 68:05:ca:2d:ba:34 <6>[ 7.584344] e1000e 0000:01:00.0 eth1: Intel(R) PRO/1000 Network Connection <6>[ 7.584358] e1000e 0000:01:00.0 eth1: MAC: 3, PHY: 8, PBA No: E46981-008 <6>[ 7.592497] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.609772] intel_rapl_msr: PL4 support detected. <6>[ 7.624624] intel_rapl_common: Found RAPL domain package <6>[ 7.624630] intel_rapl_common: Found RAPL domain core <6>[ 7.624632] intel_rapl_common: Found RAPL domain uncore <6>[ 7.624635] intel_rapl_common: Found RAPL domain psys <6>[ 7.635563] e1000e 0000:00:1f.6 eno0: renamed from eth0 <4>[ 7.638128] spi-nor spi0.0: supply vcc not found, using dummy regulator <6>[ 7.638535] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.643818] e1000e 0000:01:00.0 enp1s0: renamed from eth1 <6>[ 7.649932] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <5>[ 7.658268] Creating 1 MTD partitions on "0000:00:1f.5": <5>[ 7.658286] 0x000000000000-0x000002000000 : "BIOS" <6>[ 7.672947] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.757165] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.766463] hid: raw HID events driver (C) Jiri Kosina <6>[ 7.773430] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6 <6>[ 7.800355] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.804091] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.805648] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.805781] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.807164] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.808402] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.809120] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.809954] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 7.810378] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 7.813087] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.818862] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.823667] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.823897] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.826539] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.826597] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.829348] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.829455] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.831902] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.832173] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 7.833699] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 7.834462] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.837455] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.891680] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.896355] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.899628] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.903836] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.907970] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.911209] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.915295] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.920223] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.923120] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.926539] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.930354] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.934786] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.938517] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.941524] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.944491] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.948106] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.951843] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.954958] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.960611] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.967242] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 8.028231] block nvme0n1: No UUID available providing old NGUID <6>[ 8.201750] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.229826] /proc/cgroups lists only v1 controllers, use cgroup.controllers of root cgroup for v2 info <6>[ 8.508772] loop0: detected capacity change from 0 to 8 <6>[ 8.715160] Consider using thermal netlink events interface <6>[ 10.633456] e1000e 0000:01:00.0 enp1s0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None <3>[ 16.727461] ucsi_acpi USBC000:00: error -ETIMEDOUT: PPM init failed <7>[ 17.883964] systemd-journald[309]: /var/log/journal/0337b68cee5945d88e67c05e0be7343f/user-1000.journal: Journal file uses a different sequence number ID, rotating. <6>[ 18.556690] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 18.558597] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component <7>[ 49.548322] [IGT] i915_module_load: executing <4>[ 49.548370] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <7>[ 49.640703] [IGT] i915_module_load: starting subtest load <4>[ 50.140994] ********************************************************** <4>[ 50.140996] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 50.140996] ** ** <4>[ 50.140997] ** trace_printk() being used. Allocating extra memory. ** <4>[ 50.140998] ** ** <4>[ 50.140999] ** This means that this is a DEBUG kernel and it is ** <4>[ 50.140999] ** unsafe for production use. ** <4>[ 50.141000] ** ** <4>[ 50.141001] ** If you see this message and you are not debugging ** <4>[ 50.141001] ** the kernel, report this immediately to your vendor! ** <4>[ 50.141002] ** ** <4>[ 50.141003] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 50.141004] ********************************************************** <5>[ 50.171878] Setting dangerous option force_probe - tainting kernel <6>[ 50.176520] i915 0000:00:02.0: [drm] Found meteorlake (device ID 7d55) integrated display version 14.00 stepping C0 <7>[ 50.177662] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K <7>[ 50.177869] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:no slpc:yes) <7>[ 50.178018] i915 0000:00:02.0: [drm:intel_pch_detect [i915]] PCH not involved in display, using fake PCH type 1026 for south display <7>[ 50.178185] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7>[ 50.178369] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7>[ 50.178512] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT1: Setting up Standalone Media GT <7>[ 50.178668] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K <7>[ 50.178879] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT1: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes) <7>[ 50.179113] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7>[ 50.179263] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 38400 kHz <7>[ 50.179544] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vdbox enable: 0000, instances: 0000 <7>[ 50.179654] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vebox enable: 0000, instances: 0000 <7>[ 50.180132] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vdbox enable: 0005, instances: 0005 <7>[ 50.180237] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vebox enable: 0001, instances: 0001 <7>[ 50.180649] i915 0000:00:02.0: [drm:ggtt_probe_common [i915]] Using direct GSM access <7>[ 50.180892] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7>[ 50.180998] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 0M <7>[ 50.181120] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M <6>[ 50.181219] i915 0000:00:02.0: [drm] VT-d active for gfx access <6>[ 50.181622] i915 0000:00:02.0: vgaarb: deactivate vga console <6>[ 50.181970] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7>[ 50.181980] i915 0000:00:02.0: [drm:i915_gem_stolen_lmem_setup [i915]] Using direct DSM access <7>[ 50.182155] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000078400947 <7>[ 50.182642] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 131072K, usable: 126976K <7>[ 50.182881] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 31513 MiB [mem 0x00000000-0x7b1933fff], io: n/a <7>[ 50.182986] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(6): stolen-local: 124 MiB [mem 0x00800000-0x083fffff], io: 124 MiB [mem 0x70800000-0x783fffff] <7>[ 50.183355] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x63e09018 <7>[ 50.183530] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 3.0.0 <7>[ 50.183670] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7>[ 50.183803] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7>[ 50.183934] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7>[ 50.184079] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Mailbox #2 for backlight present <7>[ 50.184235] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 50.184374] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR5 <7>[ 50.184527] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 8 <7>[ 50.184671] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 4 <7>[ 50.184812] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7>[ 50.184955] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=3200 tRP=64 tRDPRE=40 tRAS=136 tRCD=64 tRC=200 <7>[ 50.185125] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=6000 tRP=112 tRDPRE=80 tRAS=0 tRCD=112 tRC=112 <7>[ 50.185280] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=16 tRCD=120 tRC=136 <7>[ 50.185427] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 3: DCLK=5600 tRP=104 tRDPRE=80 tRAS=240 tRCD=104 tRC=344 <7>[ 50.185564] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 0: num_planes=0 deratedbw=28913 peakbw: 51200 <7>[ 50.185699] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 50.185831] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 50.185962] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 50.186101] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 0: num_planes=0 deratedbw=35532 peakbw: 51200 <7>[ 50.186234] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 50.186363] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 50.186492] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 50.186623] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 50.186760] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 50.186890] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 50.187016] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 50.187156] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 50.187286] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 50.187411] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 50.187538] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 50.187669] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 50.187803] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 50.187934] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 50.188069] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 50.188200] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 50.188329] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 50.188458] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 50.188582] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 50.189021] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7>[ 50.189232] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT METEORLAKE ", BDB version 253 <7>[ 50.189370] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7) <7>[ 50.189505] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5) <7>[ 50.189639] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7>[ 50.189768] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7>[ 50.189897] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 848) <7>[ 50.190025] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34) <7>[ 50.190173] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7>[ 50.190327] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7>[ 50.190475] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366) <7>[ 50.190603] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305) <7>[ 50.190731] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 98, min size 136) <7>[ 50.190861] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7>[ 50.190990] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7>[ 50.191135] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 50.191267] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7>[ 50.191395] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7>[ 50.191526] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7>[ 50.191657] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 50.191788] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7>[ 50.191917] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 50.192045] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 50.192279] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7>[ 50.192412] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 50.192541] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 50.192670] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 50.192801] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 50.192928] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 50.193051] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 50.193207] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a <7>[ 50.193373] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 50.193574] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7>[ 50.193756] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 50.193967] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 50.194244] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7>[ 50.194464] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7>[ 50.194634] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 50.194796] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 50.194997] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <6>[ 50.195182] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem <7>[ 50.195200] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7>[ 50.195364] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B <7>[ 50.195513] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C <7>[ 50.195658] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D <7>[ 50.196294] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/mtl_dmc.bin <7>[ 50.197205] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7>[ 50.198184] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us <7>[ 50.198343] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7>[ 50.198515] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 85 (85.0 usec) <7>[ 50.198711] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 86 (86.0 usec) <7>[ 50.198867] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 101 (101.0 usec) <7>[ 50.199004] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 102 (102.0 usec) <7>[ 50.199143] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7>[ 50.199212] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 155 (155.0 usec) <7>[ 50.199359] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x86fc0 <7>[ 50.199417] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 6 (6.0 usec) <7>[ 50.199572] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7>[ 50.199617] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 91 (91.0 usec) <7>[ 50.199780] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f004 = 0x42c0408 (EVT_HTP) <7>[ 50.199817] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 92 (92.0 usec) <7>[ 50.199992] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL) <7>[ 50.200019] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 107 (107.0 usec) <7>[ 50.200233] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x8f008 = 0x534052f4 (EVT_HTP) <7>[ 50.200244] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 108 (108.0 usec) <7>[ 50.200442] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 161 (161.0 usec) <7>[ 50.200454] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 1: <7>[ 50.200660] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f074 = 0x96fc0 <7>[ 50.200807] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling) <7>[ 50.200949] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f004 = 0x212c20f4 (EVT_HTP) <7>[ 50.201100] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling) <7>[ 50.201243] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f008 = 0x222021e8 (EVT_HTP) <7>[ 50.201378] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 50.201511] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f00c = 0x23f422dc (EVT_HTP) <7>[ 50.201645] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 50.201778] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f010 = 0x26ec26c0 (EVT_HTP) <7>[ 50.201914] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 2: <7>[ 50.202069] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f474 = 0x9efc0 <7>[ 50.202207] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling) <7>[ 50.202338] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f404 = 0xa618a5e0 (EVT_HTP) <7>[ 50.202467] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling) <7>[ 50.202601] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f408 = 0xa70ca6d4 (EVT_HTP) <7>[ 50.202729] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 50.202858] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f40c = 0xa8e0a7c8 (EVT_HTP) <7>[ 50.202990] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 50.203131] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f410 = 0xabd8abac (EVT_HTP) <7>[ 50.203268] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 3: <7>[ 50.203399] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f874 = 0x53fc0 <7>[ 50.203543] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 50.203673] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f80c = 0x24a02388 (EVT_HTP) <7>[ 50.203799] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 50.203947] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f810 = 0x2798276c (EVT_HTP) <7>[ 50.204094] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 4: <7>[ 50.204224] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5fc74 = 0x5afc0 <7>[ 50.204353] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 50.204481] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5fc0c = 0x94a09388 (EVT_HTP) <7>[ 50.204609] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5fc40 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 50.204738] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5fc10 = 0x9798976c (EVT_HTP) <7>[ 50.210677] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 4 display pipes available. <6>[ 50.213777] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/mtl_dmc.bin (v2.23) <7>[ 50.216491] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 50.216659] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz <7>[ 50.216807] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 1305600 kHz <7>[ 50.216970] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:505:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 50.217168] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:505:DDI A/PHY A] <7>[ 50.217391] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7>[ 50.217562] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7>[ 50.217719] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7>[ 50.217860] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 50.217993] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7>[ 50.218138] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7>[ 50.218275] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7>[ 50.218419] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7>[ 50.218560] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 50.218718] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:505:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 50.218951] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 50.219101] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 50.219235] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 50.219363] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 50.219489] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 50.219760] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 50.220140] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 50.221246] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 turning VDD on <7>[ 50.221537] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 50.222927] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 00 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 50.223315] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7>[ 50.223938] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 04 83 85 04 00 <7>[ 50.224715] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 3 <7>[ 50.225151] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] PSR2 supported <7>[ 50.226465] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 50.232935] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 50.232946] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD monitor <7>[ 50.232952] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD size 20, SAD count 0 <7>[ 50.233007] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:506:eDP-1] using preferred EDID fixed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 50.233480] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:506:eDP-1] Performing OUI wait (0 ms) <7>[ 50.233979] i915 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [i915]] [CONNECTOR:506:eDP-1] Detected unsupported HDR backlight interface version 0 <7>[ 50.234161] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:506:eDP-1] DRRS type: none <7>[ 50.234398] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:506:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 50.234590] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:506:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 50.234781] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 50.234917] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 50.235049] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 50.235198] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 50.235330] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 50.235605] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 50.235893] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:514:DDI B/PHY B] Using AUX CH B (VBT) <7>[ 50.236053] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:514:DDI B/PHY B] <7>[ 50.236518] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:514:DDI B/PHY B] <7>[ 50.236660] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:514:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7>[ 50.237032] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:532:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 50.237311] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 50.237778] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:532:DDI TC1/PHY TC1] <7>[ 50.238141] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:541:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 50.238483] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected) <7>[ 50.238850] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7>[ 50.239005] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:541:DDI TC2/PHY TC2] <7>[ 50.239203] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:541:DDI TC2/PHY TC2] Using DDC pin 0xa (VBT) <7>[ 50.239491] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:545:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 50.239742] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port F/TC#3: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 50.239983] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:545:DDI TC3/PHY TC3] <7>[ 50.240362] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:554:DDI TC4/PHY TC4] Using AUX CH USBC4 (VBT) <7>[ 50.240613] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port G/TC#4: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 50.240858] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:554:DDI TC4/PHY TC4] <7>[ 50.241833] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:149:pipe A] hw state readout: enabled <7>[ 50.242171] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:267:pipe B] hw state readout: disabled <7>[ 50.242509] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:385:pipe C] hw state readout: disabled <7>[ 50.242834] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:503:pipe D] hw state readout: disabled <7>[ 50.242987] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: enabled, pipe A <7>[ 50.243158] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A <7>[ 50.243311] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A <7>[ 50.243458] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A <7>[ 50.243604] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A <7>[ 50.243750] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:143:cursor A] hw state readout: disabled, pipe A <7>[ 50.243891] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 1B] hw state readout: disabled, pipe B <7>[ 50.244033] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:181:plane 2B] hw state readout: disabled, pipe B <7>[ 50.244203] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 3B] hw state readout: disabled, pipe B <7>[ 50.244348] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:241:plane 4B] hw state readout: disabled, pipe B <7>[ 50.244493] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:251:plane 5B] hw state readout: disabled, pipe B <7>[ 50.244633] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:261:cursor B] hw state readout: disabled, pipe B <7>[ 50.244776] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:269:plane 1C] hw state readout: disabled, pipe C <7>[ 50.244920] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:299:plane 2C] hw state readout: disabled, pipe C <7>[ 50.245072] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:329:plane 3C] hw state readout: disabled, pipe C <7>[ 50.245217] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:359:plane 4C] hw state readout: disabled, pipe C <7>[ 50.245380] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:369:plane 5C] hw state readout: disabled, pipe C <7>[ 50.245548] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:379:cursor C] hw state readout: disabled, pipe C <7>[ 50.245695] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:387:plane 1D] hw state readout: disabled, pipe D <7>[ 50.245835] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:417:plane 2D] hw state readout: disabled, pipe D <7>[ 50.246127] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:447:plane 3D] hw state readout: disabled, pipe D <7>[ 50.246340] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:477:plane 4D] hw state readout: disabled, pipe D <7>[ 50.246558] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:487:plane 5D] hw state readout: disabled, pipe D <7>[ 50.246732] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:497:cursor D] hw state readout: disabled, pipe D <7>[ 50.247720] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 50.247931] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:505:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 50.248141] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:514:DDI B/PHY B] hw state readout: disabled, pipe A <7>[ 50.248282] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:516:DP-MST A] hw state readout: disabled, pipe A <7>[ 50.248416] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:517:DP-MST B] hw state readout: disabled, pipe B <7>[ 50.248547] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:518:DP-MST C] hw state readout: disabled, pipe C <7>[ 50.248677] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:519:DP-MST D] hw state readout: disabled, pipe D <7>[ 50.248895] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 50.249083] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:532:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 50.249217] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:534:DP-MST A] hw state readout: disabled, pipe A <7>[ 50.249351] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:535:DP-MST B] hw state readout: disabled, pipe B <7>[ 50.249495] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:536:DP-MST C] hw state readout: disabled, pipe C <7>[ 50.249631] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:537:DP-MST D] hw state readout: disabled, pipe D <7>[ 50.249819] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 50.250006] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:541:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 50.250178] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 50.250316] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:545:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 50.250449] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:547:DP-MST A] hw state readout: disabled, pipe A <7>[ 50.250580] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:548:DP-MST B] hw state readout: disabled, pipe B <7>[ 50.250713] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:549:DP-MST C] hw state readout: disabled, pipe C <7>[ 50.250899] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:550:DP-MST D] hw state readout: disabled, pipe D <7>[ 50.251082] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port G/TC#4: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 50.251225] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:554:DDI TC4/PHY TC4] hw state readout: disabled, pipe A <7>[ 50.251359] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:556:DP-MST A] hw state readout: disabled, pipe A <7>[ 50.251488] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:557:DP-MST B] hw state readout: disabled, pipe B <7>[ 50.251616] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:558:DP-MST C] hw state readout: disabled, pipe C <7>[ 50.251743] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:559:DP-MST D] hw state readout: disabled, pipe D <7>[ 50.252554] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:149:pipe A] reserving DPLL 0 <7>[ 50.252705] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x1, on 1 <7>[ 50.252849] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 50.253034] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7>[ 50.253224] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 50.253376] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7>[ 50.253516] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7>[ 50.253653] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7>[ 50.253972] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:506:eDP-1] hw state readout: enabled <7>[ 50.254152] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:515:DP-1] hw state readout: disabled <7>[ 50.254311] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:527:HDMI-A-1] hw state readout: disabled <7>[ 50.254473] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:533:DP-2] hw state readout: disabled <7>[ 50.254627] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:542:HDMI-A-2] hw state readout: disabled <7>[ 50.254828] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:546:DP-3] hw state readout: disabled <7>[ 50.255017] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:555:DP-4] hw state readout: disabled <7>[ 50.255253] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 256910 kHz <7>[ 50.255394] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:63:plane 2A] min_cdclk 0 kHz <7>[ 50.255524] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 3A] min_cdclk 0 kHz <7>[ 50.255652] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:123:plane 4A] min_cdclk 0 kHz <7>[ 50.255782] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 5A] min_cdclk 0 kHz <7>[ 50.255944] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:143:cursor A] min_cdclk 0 kHz <7>[ 50.256128] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:149:pipe A] min_cdclk 256910 kHz <7>[ 50.256265] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 1B] min_cdclk 0 kHz <7>[ 50.256392] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:181:plane 2B] min_cdclk 0 kHz <7>[ 50.256516] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 3B] min_cdclk 0 kHz <7>[ 50.256643] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:241:plane 4B] min_cdclk 0 kHz <7>[ 50.256769] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:251:plane 5B] min_cdclk 0 kHz <7>[ 50.256903] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:261:cursor B] min_cdclk 0 kHz <7>[ 50.257028] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:267:pipe B] min_cdclk 0 kHz <7>[ 50.257181] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:269:plane 1C] min_cdclk 0 kHz <7>[ 50.257311] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:299:plane 2C] min_cdclk 0 kHz <7>[ 50.257433] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:329:plane 3C] min_cdclk 0 kHz <7>[ 50.257554] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:359:plane 4C] min_cdclk 0 kHz <7>[ 50.257678] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:369:plane 5C] min_cdclk 0 kHz <7>[ 50.257801] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:379:cursor C] min_cdclk 0 kHz <7>[ 50.257925] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:385:pipe C] min_cdclk 0 kHz <7>[ 50.258047] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:387:plane 1D] min_cdclk 0 kHz <7>[ 50.258192] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:417:plane 2D] min_cdclk 0 kHz <7>[ 50.258324] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:447:plane 3D] min_cdclk 0 kHz <7>[ 50.258452] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:477:plane 4D] min_cdclk 0 kHz <7>[ 50.258575] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:487:plane 5D] min_cdclk 0 kHz <7>[ 50.258701] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:497:cursor D] min_cdclk 0 kHz <7>[ 50.258828] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:503:pipe D] min_cdclk 0 kHz <7>[ 50.259164] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:149:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 50.259308] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:267:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 50.259446] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:385:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 50.259583] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:503:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 50.259714] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe A data rate 2055280 num active planes 1 <7>[ 50.259863] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe B data rate 0 num active planes 0 <7>[ 50.260012] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe C data rate 0 num active planes 0 <7>[ 50.260168] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe D data rate 0 num active planes 0 <7>[ 50.260391] i915 0000:00:02.0: [drm:intel_cmtg_sanitize [i915]] CMTG readout: CMTG A: enabled, CMTG B: n/a, Transcoder A secondary: yes, Transcoder B secondary: no <7>[ 50.260732] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:149:pipe A] enable: yes [setup_hw_state] <7>[ 50.260876] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 50.261012] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 50.261167] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 50.261309] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 50.261449] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7>[ 50.261584] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 50.261717] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 623587, link_n: 524288, tu: 64 <7>[ 50.261849] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 50.261981] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7>[ 50.262154] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7>[ 50.262289] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7>[ 50.262419] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7>[ 50.262547] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 50.262677] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7>[ 50.262802] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7>[ 50.262936] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7>[ 50.263086] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7>[ 50.263232] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7>[ 50.263364] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 50.263493] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 50.263624] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 50.263755] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 50.263887] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 50.264018] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 513820, min cdclk 256910 <7>[ 50.264162] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 50.264297] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 50.264426] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 50.264555] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 50.264685] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 50.264813] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: clock: 432000, fracen: no, <7>[ 50.264942] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 225, tx_clk_div: 1. <7>[ 50.265077] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state: <7>[ 50.265209] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21 <7>[ 50.265336] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 50.265466] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 50.265598] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 50.265726] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 50.265855] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 50.265983] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 50.266126] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 50.266262] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 50.266392] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.266521] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.266652] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.266784] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 50.266912] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 50.267039] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.267190] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.267323] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.267450] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 50.267579] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 50.267708] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:267:pipe B] enable: no [setup_hw_state] <7>[ 50.267835] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:385:pipe C] enable: no [setup_hw_state] <7>[ 50.267961] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:503:pipe D] enable: no [setup_hw_state] <7>[ 50.268115] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] TBT PLL enabled but not in use, disabling <7>[ 50.268475] i915 0000:00:02.0: [drm:skl_get_initial_plane_config [i915]] [CRTC:149:pipe A][PLANE:33:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800 <7>[ 50.268622] i915 0000:00:02.0: [drm:initial_plane_vma [i915]] Using dma_addr=0x0000000000800000, based on initial plane programming <7>[ 50.268741] i915 0000:00:02.0: [drm:_i915_gem_object_stolen_init [i915]] creating preallocated stolen object: stolen_offset=0x0000000000000000, size=0x00000000013c7000 <7>[ 50.269286] i915 0000:00:02.0: [drm:initial_plane_vma [i915]] Initial plane fb bound to 0x0 in the ggtt (original 0xfec00000) <7>[ 50.271808] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [2048K, 832K) <7>[ 50.276231] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [1040K, 832K) <7>[ 50.276371] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [13c7000, fee00000] <7>[ 50.276488] i915 0000:00:02.0: [drm:nop_init_clock_gating [i915]] No clock gating settings or workarounds applied. <7>[ 50.276598] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: L3BANK steering: group=0x0, instance=0x0 <7>[ 50.276722] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: DSS steering: group=0x0, instance=0x0 <7>[ 50.276838] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: INSTANCE 0 steering: group=0x0, instance=0x0 <7>[ 50.276963] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7>[ 50.279565] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 7 engine workarounds on rcs'0 <7>[ 50.279707] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 whitelist workarounds on rcs'0 <7>[ 50.279835] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 7 context workarounds on rcs'0 <7>[ 50.281082] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 engine workarounds on bcs'0 <7>[ 50.281222] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 context workarounds on bcs'0 <7>[ 50.281721] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 engine workarounds on ccs'0 <7>[ 50.281856] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 context workarounds on ccs'0 <7>[ 50.283161] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 50.283326] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 24 ext-regs. <7>[ 50.283486] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7>[ 50.304763] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0x13c804f <7>[ 50.304940] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x410800 <7>[ 50.305088] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4 <7>[ 50.305224] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7>[ 50.305354] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x2f92 <7>[ 50.305478] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x7d550008 <7>[ 50.305603] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7>[ 50.305724] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7>[ 50.305845] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7>[ 50.305968] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7>[ 50.306108] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7>[ 50.306231] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7>[ 50.306349] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7>[ 50.306469] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <6>[ 50.307455] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/mtl_guc_70.bin version 70.53.0 <7>[ 50.317164] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 8ms, freq = 1650MHz -> 2150MHz vs 2200MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 50.318173] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6>[ 50.319942] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6>[ 50.319944] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <6>[ 50.320399] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled <7>[ 50.320719] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT0: GUC: Querying HW config table: size = 0, offset = 0x00000000 <7>[ 50.321568] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT0: GUC: Querying HW config table: size = 752, offset = 0x01FFC000 <7>[ 50.330614] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: OADDRM steering: group=0x0, instance=0x0 <7>[ 50.330776] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 5 GT workarounds on global <7>[ 50.331746] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'0 <7>[ 50.331892] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'0 <7>[ 50.332556] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'2 <7>[ 50.332685] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'2 <7>[ 50.333575] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vecs'0 <7>[ 50.333708] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vecs'0 <7>[ 50.334336] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on other'6 <7>[ 50.334466] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on other'6 <7>[ 50.336433] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT1: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 50.336610] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT1: GUC: capture found 24 ext-regs. <7>[ 50.336771] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT1: GUC: Used 4 KB for temporary ADS regset <7>[ 50.359669] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 0] = 0x1ffd04f <7>[ 50.359829] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 1] = 0x400000 <7>[ 50.359958] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 2] = 0x4 <7>[ 50.360095] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 3] = 0x3 <7>[ 50.360222] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 4] = 0x47fc <7>[ 50.360348] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 5] = 0x7d550008 <7>[ 50.360467] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 6] = 0x0 <7>[ 50.360588] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 7] = 0x0 <7>[ 50.360709] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 8] = 0x0 <7>[ 50.360832] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 9] = 0x0 <7>[ 50.360955] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[10] = 0x0 <7>[ 50.361217] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[11] = 0x0 <7>[ 50.361348] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[12] = 0x0 <7>[ 50.361466] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[13] = 0x0 <7>[ 50.361582] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT1: HuC: loaded by GSC = no <7>[ 50.365382] i915 0000:00:02.0: [drm:i915_gsc_proxy_component_bind [i915]] GT1: GSC proxy mei component bound <6>[ 50.365539] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops i915_gsc_proxy_component_ops [i915]) <6>[ 50.366110] i915 0000:00:02.0: [drm] GT1: GuC firmware i915/mtl_guc_70.bin version 70.53.0 <6>[ 50.366112] i915 0000:00:02.0: [drm] GT1: HuC firmware i915/mtl_huc_gsc.bin version 8.5.4 <7>[ 50.380136] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT1: GUC: init took 12ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 50.380386] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled <7>[ 50.389152] i915 0000:00:02.0: [drm:intel_huc_wait_for_auth_complete [i915]] GT1: HuC: auth took 8ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x0000C1DC, count = 0, ret = 0 <6>[ 50.389304] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for clear media <6>[ 50.390216] i915 0000:00:02.0: [drm] GT1: GUC: submission enabled <6>[ 50.390217] i915 0000:00:02.0: [drm] GT1: GUC: SLPC enabled <6>[ 50.390420] i915 0000:00:02.0: [drm] GT1: GUC: RC enabled <7>[ 50.390648] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT1: GUC: Querying HW config table: size = 0, offset = 0x00000000 <7>[ 50.391619] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT1: GUC: Querying HW config table: size = 752, offset = 0xFEDA5000 <7>[ 50.397577] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7>[ 50.397721] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7>[ 50.397836] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7>[ 50.397942] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'2 to vcs1 <7>[ 50.398050] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7>[ 50.398192] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed ccs'0 to ccs0 <7>[ 50.398292] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed other'6 to other0 <6>[ 50.399936] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized <7>[ 50.401370] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:149:pipe A] FQ 0: start 0x90008 <7>[ 50.401533] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:149:pipe A] FQ 1: start 0x90108 <7>[ 50.401679] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:149:pipe A] FQ 2: start 0x90208 <7>[ 50.401817] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:149:pipe A] FQ 3: start 0x90308 <7>[ 50.401952] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:149:pipe A] FQ 4: start 0x903c8 <7>[ 50.402146] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:267:pipe B] FQ 0: start 0x98008 <7>[ 50.402283] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:267:pipe B] FQ 1: start 0x98108 <7>[ 50.402423] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:267:pipe B] FQ 2: start 0x98208 <7>[ 50.402555] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:267:pipe B] FQ 3: start 0x98308 <7>[ 50.402689] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:267:pipe B] FQ 4: start 0x983c8 <7>[ 50.402815] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:385:pipe C] FQ 0: start 0x52008 <7>[ 50.402940] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:385:pipe C] FQ 1: start 0x52108 <7>[ 50.403074] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:385:pipe C] FQ 2: start 0x52208 <7>[ 50.403206] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:385:pipe C] FQ 3: start 0x52308 <7>[ 50.403336] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:385:pipe C] FQ 4: start 0x523c8 <7>[ 50.403464] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:503:pipe D] FQ 0: start 0x59008 <7>[ 50.403594] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:503:pipe D] FQ 1: start 0x59108 <7>[ 50.403721] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:503:pipe D] FQ 2: start 0x59208 <7>[ 50.403848] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:503:pipe D] FQ 3: start 0x59308 <7>[ 50.403976] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:503:pipe D] FQ 4: start 0x593c8 <7>[ 50.404412] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 50.404564] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:149:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 50.404708] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 2048) -> ( 0 - 4001), size 2048 -> 4001 <7>[ 50.404844] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95 <7>[ 50.404974] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm <7>[ 50.405192] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 2, 2, 2, 2, 2, 2, 0, 0, 1, 3, 1 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 <7>[ 50.405327] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 49, 49, 49, 49, 49, 49, 0, 0, 7, 73, 7 -> 49, 385, 385, 457, 457, 673, 0, 0, 0, 73, 0 <7>[ 50.405459] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 0, 82, 0 <7>[ 50.405868] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:267:pipe B] enable: no [fastset] <7>[ 50.406024] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:385:pipe C] enable: no [fastset] <7>[ 50.406185] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:503:pipe D] enable: no [fastset] <7>[ 50.408122] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 42393600 bytes of contiguous stolen space for FBC, limit: 1 <7>[ 50.408281] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:33:plane 1A] <7>[ 50.408474] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: no -> yes (pipe: A) <7>[ 50.408627] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 4 (mbus joined: yes) <7>[ 50.414414] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:267:pipe B] <7>[ 50.414799] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:385:pipe C] <7>[ 50.415192] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:503:pipe D] <7>[ 50.418860] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:506:eDP-1] adding connector to sysfs <7>[ 50.421462] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:506:eDP-1] backlight device intel_backlight registered <7>[ 50.421648] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:506:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7>[ 50.421809] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:506:eDP-1] Panel prepare <7>[ 50.422221] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 50.423530] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:506:eDP-1] generating connector hotplug event <7>[ 50.423593] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:515:DP-1] adding connector to sysfs <7>[ 50.423973] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7>[ 50.424762] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:515:DP-1] generating connector hotplug event <7>[ 50.424803] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:527:HDMI-A-1] adding connector to sysfs <7>[ 50.425119] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:527:HDMI-A-1] generating connector hotplug event <7>[ 50.425155] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:533:DP-2] adding connector to sysfs <7>[ 50.425507] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2 <7>[ 50.426340] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:533:DP-2] generating connector hotplug event <7>[ 50.426378] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:542:HDMI-A-2] adding connector to sysfs <7>[ 50.426702] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:542:HDMI-A-2] generating connector hotplug event <7>[ 50.426735] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:546:DP-3] adding connector to sysfs <7>[ 50.427131] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 50.427924] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:546:DP-3] generating connector hotplug event <7>[ 50.427961] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:555:DP-4] adding connector to sysfs <7>[ 50.428464] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY TC4 bus for card0-DP-4 <7>[ 50.429912] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:555:DP-4] generating connector hotplug event <6>[ 50.429944] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7>[ 50.432589] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected <6>[ 50.447036] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 50.451752] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 <7>[ 50.453040] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 50.453531] i915 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [i915]] aud_ts_cdclk set to M=60, N=768 <7>[ 50.454514] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 50.454521] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7>[ 50.455606] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:515:DP-1] <7>[ 50.456321] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] found possible fb from [PLANE:33:plane 1A] <7>[ 50.456479] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:267:pipe B] not active, skipping <7>[ 50.456625] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:385:pipe C] not active, skipping <7>[ 50.456770] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:503:pipe D] not active, skipping <7>[ 50.456926] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] checking [PLANE:33:plane 1A] for BIOS fb <7>[ 50.457093] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:149:pipe A] area: 2880x1800, bpp: 32, size: 20736000 <7>[ 50.457255] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] fb big enough [PLANE:33:plane 1A] (20738048 >= 20736000) <7>[ 50.457409] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:267:pipe B] not active, skipping <7>[ 50.457564] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:385:pipe C] not active, skipping <7>[ 50.457706] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:503:pipe D] not active, skipping <7>[ 50.457851] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] using BIOS fb for initial console <7>[ 50.458234] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 50.461788] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 50.462451] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:515:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.462650] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1] <7>[ 50.466948] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:527:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.467111] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:533:DP-2] <7>[ 50.467860] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 50.468132] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:533:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.468301] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:542:HDMI-A-2] <7>[ 50.468722] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7>[ 50.473027] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:542:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.473201] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:546:DP-3] <7>[ 50.473508] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 50.473759] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:546:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.473905] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:555:DP-4] <7>[ 50.474174] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 50.474406] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:555:DP-4] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.474570] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 50.474972] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] <6>[ 50.474888] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7>[ 50.474989] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:506:eDP-1] <7>[ 50.475745] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 50.476474] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 50.476957] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 50.477173] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 50.477384] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 50.477649] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 50.477654] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD monitor <7>[ 50.477658] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD size 20, SAD count 0 <7>[ 50.477678] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] VRR capable: no <7>[ 50.477826] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 50.477967] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 50.478909] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] status updated from unknown to connected <7>[ 50.479182] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 50.479576] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] probed modes: <7>[ 50.479582] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 50.479587] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:DP-1] <7>[ 50.479590] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:515:DP-1] <7>[ 50.480786] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9a01 <7>[ 50.481691] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7>[ 50.481718] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7>[ 50.483843] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:DP-1] disconnected <7>[ 50.483851] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] <7>[ 50.483856] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1] <7>[ 50.488203] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected <7>[ 50.488210] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] <7>[ 50.488214] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:533:DP-2] <7>[ 50.488638] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] disconnected <7>[ 50.488642] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-2] <7>[ 50.488646] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:542:HDMI-A-2] <7>[ 50.492976] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-2] disconnected <7>[ 50.492987] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:546:DP-3] <7>[ 50.492993] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:546:DP-3] <7>[ 50.493406] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:546:DP-3] disconnected <7>[ 50.493412] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:555:DP-4] <7>[ 50.493417] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:555:DP-4] <7>[ 50.493811] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:555:DP-4] disconnected <7>[ 50.493817] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:eDP-1] enabled? yes <7>[ 50.493823] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:515:DP-1] enabled? no <7>[ 50.493826] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:527:HDMI-A-1] enabled? no <7>[ 50.493829] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:DP-2] enabled? no <7>[ 50.493832] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:HDMI-A-2] enabled? no <7>[ 50.493835] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:546:DP-3] enabled? no <7>[ 50.493838] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:555:DP-4] enabled? no <7>[ 50.493997] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 50.494026] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:eDP-1] found preferred mode: 2880x1800 <7>[ 50.494030] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 50.494051] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7>[ 50.494377] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7>[ 50.494407] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] re-using BIOS fb <7>[ 50.494713] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 2880x1800 fb: 0x00000000 <6>[ 50.497042] fbcon: i915drmfb (fb0) is primary device <7>[ 50.498905] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:506:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 50.499278] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:505:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7>[ 50.499531] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 link rate required 1926825 available 2160000 <7>[ 50.499773] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 50.500018] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:505:DDI A/PHY A] [CRTC:149:pipe A] <7>[ 50.500348] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 623587/524288, found tu 64, data 7483046/8388608 link 498869/524288) <7>[ 50.500602] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in dpll_hw_state <7>[ 50.500826] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7>[ 50.501050] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 50.501293] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_hw_state: clock: 432000, fracen: no, <7>[ 50.501521] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] multiplier: 225, tx_clk_div: 1. <7>[ 50.501742] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_rawhw_state: <7>[ 50.501956] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] tx: 0x10, cmn: 0x21 <7>[ 50.502183] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 50.502391] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 50.502596] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 50.502799] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 50.503001] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 50.503224] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7>[ 50.503426] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 50.503626] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_hw_state: clock: 540000, fracen: yes, <7>[ 50.503828] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] quot: 40960, rem: 0, den: 1, <7>[ 50.504028] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 50.504242] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_rawhw_state: <7>[ 50.504444] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] tx: 0x10, cmn: 0x21 <7>[ 50.504644] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 50.504846] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 50.505048] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 50.505261] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 50.505464] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 50.505671] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 50.505880] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 432000, found 540000) <7>[ 50.506102] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in set_context_latency (expected 0, found 1) <7>[ 50.506306] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7>[ 50.506510] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:149:pipe A] releasing DPLL 0 <7>[ 50.506976] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 50.507213] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 <7>[ 50.507370] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 0, 73, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 <7>[ 50.507517] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 0, 82, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 <7>[ 50.507655] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:63:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 50.507789] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:63:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.507922] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:63:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.508052] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:63:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.508222] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:93:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 50.508371] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:93:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.508511] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:93:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.508642] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:93:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.508771] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 50.508897] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:123:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.509101] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:123:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.509255] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.509408] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:133:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 50.509556] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:133:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.509685] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:133:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.509809] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:133:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.509934] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:143:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 50.510083] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:143:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.510217] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:143:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.510359] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:143:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.510552] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200 <7>[ 50.510806] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 50.511032] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 50.511259] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 50.511475] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159 <7>[ 50.511733] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:149:pipe A] allocated DPLL 0 <7>[ 50.511885] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:149:pipe A] reserving DPLL 0 <7>[ 50.512036] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:149:pipe A] enable: yes [modeset] <7>[ 50.512210] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 50.512368] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 50.512522] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 50.512664] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 50.512802] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7>[ 50.512937] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 50.513083] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 50.513220] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 50.513352] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7>[ 50.513487] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7>[ 50.513617] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7>[ 50.513749] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7>[ 50.513879] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 50.514008] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 4, length 14 <7>[ 50.514384] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7>[ 50.514543] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7>[ 50.514692] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7>[ 50.514826] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7>[ 50.514958] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7>[ 50.515118] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7>[ 50.515256] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 1 <7>[ 50.515410] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1878, vmax: 1878, flipline: 1878, pipeline full: 0, guardband: 76 vsync start: 75, vsync end: 69 <7>[ 50.515557] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1878, vmax vtotal: 1878 <7>[ 50.515697] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7>[ 50.515824] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 50.515951] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 50.516102] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 50.516249] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 50.516396] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 50.516527] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820, min cdclk 256910 <7>[ 50.516660] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 50.516789] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 50.516917] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 50.517048] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 50.517207] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 50.517345] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: clock: 540000, fracen: yes, <7>[ 50.517478] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] quot: 40960, rem: 0, den: 1, <7>[ 50.517608] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 50.517736] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state: <7>[ 50.517864] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21 <7>[ 50.517990] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 50.518142] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 50.518276] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 50.518407] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 50.518539] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 50.518670] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 50.518796] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 50.518923] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 50.519051] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.519210] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.519343] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.519479] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 50.519608] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 50.519735] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.519871] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.519998] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.520148] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 50.520285] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 50.520413] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:564] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 50.520544] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 50.520675] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 50.520804] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7>[ 50.520931] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7>[ 50.521086] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7>[ 50.521238] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7>[ 50.521391] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7>[ 50.524502] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 50.524676] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 50.524819] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 50.524956] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 50.525134] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 50.525281] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 50.525432] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 50.525574] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 50.525703] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 50.525795] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7>[ 50.525843] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 50.525973] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 50.526127] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 50.526259] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 50.526388] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 50.526516] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 50.526645] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 50.526774] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 50.526903] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 50.527030] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 50.527174] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 50.527314] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 50.527449] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 50.527582] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 50.527714] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 50.527841] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 50.528178] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 50.528312] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 50.528445] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 50.528573] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 50.528702] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 50.528831] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 50.528954] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 50.529087] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 50.529218] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 50.529351] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 50.529479] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <6>[ 50.534450] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 50.536203] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <6>[ 50.537168] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 <6>[ 50.538228] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <6>[ 50.544129] i915 0000:00:02.0: [drm] GT1: Loaded GSC firmware i915/mtl_gsc_1.bin (cv1.0, r102.1.15.1926, svn 1) <7>[ 50.564690] i915 0000:00:02.0: [drm:intel_huc_wait_for_auth_complete [i915]] GT1: HuC: auth took 0ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x00116C68, count = 0, ret = 0 <6>[ 50.565041] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for all workloads <7>[ 50.729635] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:506:eDP-1] set backlight PWM = 0 <7>[ 50.730822] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7>[ 50.738568] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 turn panel power off <7>[ 50.738559] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000 <7>[ 50.739053] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 50.739442] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 50.739430] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:505:DDI A/PHY A] - short <7>[ 50.789262] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 50.790207] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:505:DDI A/PHY A] <7>[ 50.790236] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A] <7>[ 50.791576] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7>[ 50.792270] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7>[ 50.792351] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:505:DDI A/PHY A] - long <7>[ 50.792896] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7>[ 50.792987] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7>[ 50.793481] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:505:DDI A/PHY A] <7>[ 50.793959] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:33:plane 1A] <7>[ 50.794907] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0xffff0072 0x13421c72) <7>[ 50.795876] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:505:DDI A/PHY A] <7>[ 50.796443] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:514:DDI B/PHY B] <7>[ 50.796830] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:516:DP-MST A] <7>[ 50.797129] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:517:DP-MST B] <7>[ 50.797396] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:518:DP-MST C] <7>[ 50.797646] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:519:DP-MST D] <7>[ 50.797891] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:532:DDI TC1/PHY TC1] <7>[ 50.798198] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:534:DP-MST A] <7>[ 50.798444] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:535:DP-MST B] <7>[ 50.798686] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:536:DP-MST C] <7>[ 50.798915] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:537:DP-MST D] <7>[ 50.799039] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:541:DDI TC2/PHY TC2] <7>[ 50.799186] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:545:DDI TC3/PHY TC3] <7>[ 50.799309] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:547:DP-MST A] <7>[ 50.799431] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:548:DP-MST B] <7>[ 50.799553] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:549:DP-MST C] <7>[ 50.799672] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:550:DP-MST D] <7>[ 50.799798] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:554:DDI TC4/PHY TC4] <7>[ 50.799925] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:556:DP-MST A] <7>[ 50.800049] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:557:DP-MST B] <7>[ 50.800201] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:558:DP-MST C] <7>[ 50.800327] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:559:DP-MST D] <7>[ 50.800627] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 50.802049] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A] <7>[ 50.802269] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7>[ 50.804006] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 turn panel power on <7>[ 50.804190] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 wait for panel power cycle (486 ms remaining) <7>[ 51.035686] i915 0000:00:02.0: [drm:gsc_work [i915]] GT1: GSC Proxy initialized <7>[ 51.297631] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7>[ 51.372113] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 51.372722] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 51.373373] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 51.404801] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7>[ 51.405783] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:505:DDI A/PHY A] - long <7>[ 51.406436] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20 <7>[ 51.408304] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:505:DDI A/PHY A] <7>[ 51.514876] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.514907] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.514907] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.515283] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.577187] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 51.578194] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 turning VDD on <7>[ 51.578830] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 51.582796] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 51.583761] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:506:eDP-1][ENCODER:505:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 51.584446] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:506:eDP-1][ENCODER:505:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07 <7>[ 51.585581] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:506:eDP-1][ENCODER:505:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 51.586342] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:506:eDP-1][ENCODER:505:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 51.587416] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:506:eDP-1][ENCODER:505:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 51.587600] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:506:eDP-1][ENCODER:505:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7>[ 51.589163] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:506:eDP-1][ENCODER:505:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 51.589301] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:506:eDP-1][ENCODER:505:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7>[ 51.589948] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7>[ 51.590243] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7>[ 51.590384] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7>[ 51.590594] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:506:eDP-1] set backlight PWM = 192000 <7>[ 51.601575] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2 <7>[ 51.603380] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:506:eDP-1] <7>[ 51.603619] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:149:pipe A] <7>[ 51.605150] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 51.606523] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0x2000071 0x13421c72) <7>[ 51.607211] i915 0000:00:02.0: [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=9600/192000 <6>[ 51.607550] Console: switching to colour frame buffer device 180x56 <7>[ 51.607816] i915 0000:00:02.0: [drm:intel_panel_actually_set_backlight [i915]] [CONNECTOR:506:eDP-1] set backlight level = 13892 <6>[ 51.636010] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7>[ 51.636021] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 14 <7>[ 51.636198] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: C0 <7>[ 51.636340] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7>[ 51.636475] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: yes <7>[ 51.636607] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: yes <7>[ 51.636737] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7>[ 51.636869] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7>[ 51.637003] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: yes <7>[ 51.637153] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7>[ 51.637290] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7>[ 51.637420] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7>[ 51.637549] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7>[ 51.637677] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7>[ 51.637811] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7>[ 51.637941] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7>[ 51.638085] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: no <7>[ 51.638218] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7>[ 51.638350] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7>[ 51.638479] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7>[ 51.638607] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7>[ 51.638734] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: yes <7>[ 51.638863] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 38400 kHz <7>[ 51.639604] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7>[ 51.639813] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D <7>[ 51.640175] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C <7>[ 51.640365] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B <7>[ 51.640546] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 51.640775] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x7d55 rev=0x08 platform=METEORLAKE (subplatform=0x0) gen=12 <7>[ 51.640877] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 12.71 <7>[ 51.640973] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 13 <7>[ 51.641075] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: B0 <7>[ 51.641170] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: C0 <7>[ 51.641262] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 0 <7>[ 51.641351] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x41 <7>[ 51.641442] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x211000 <7>[ 51.641533] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: METEORLAKE <7>[ 51.641622] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7>[ 51.641711] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7>[ 51.641802] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 46 <7>[ 51.641892] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7>[ 51.641982] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7>[ 51.642079] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7>[ 51.642168] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7>[ 51.642256] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7>[ 51.642345] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7>[ 51.642435] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7>[ 51.642524] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7>[ 51.642613] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7>[ 51.642704] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: yes <7>[ 51.642793] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: yes <7>[ 51.642880] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7>[ 51.642968] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7>[ 51.643064] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7>[ 51.643157] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: yes <7>[ 51.643247] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: yes <7>[ 51.643336] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7>[ 51.643425] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7>[ 51.643514] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: no <7>[ 51.643604] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7>[ 51.643693] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: yes <7>[ 51.643782] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7>[ 51.643871] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7>[ 51.643959] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: yes <7>[ 51.644049] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: yes <7>[ 51.644162] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: yes <7>[ 51.644250] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7>[ 51.644338] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: yes <7>[ 51.644427] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7>[ 51.644515] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7>[ 51.644604] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7>[ 51.644692] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7>[ 51.644779] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: yes <7>[ 51.644867] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: no <7>[ 51.644954] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7>[ 51.645041] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7>[ 51.645172] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7>[ 51.645264] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7>[ 51.645352] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7>[ 51.645441] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 400003 <7>[ 51.645529] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 8 <7>[ 51.645615] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: geometry dss mask=00000000,000000ff <7>[ 51.645703] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: compute dss mask=00000000,000000ff <7>[ 51.645791] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 128 <7>[ 51.645880] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 16 <7>[ 51.645968] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7>[ 51.646056] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7>[ 51.646174] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: no <7>[ 51.646263] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 4041400 <7>[ 51.646350] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 8 <7>[ 51.646446] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: geometry dss mask=00000000,0000ff00 <7>[ 51.646540] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: compute dss mask=00000000,0000ff00 <7>[ 51.646631] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 128 <7>[ 51.646721] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 16 <7>[ 51.646810] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7>[ 51.646898] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7>[ 51.646988] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: no <6>[ 51.647086] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6>[ 51.647087] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6>[ 51.647088] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7>[ 51.657020] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 51.657030] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 51.657239] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] <7>[ 51.657246] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:506:eDP-1] <7>[ 51.657968] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 51.658407] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 51.658526] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 51.658646] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 51.658840] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 51.658844] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD monitor <7>[ 51.658850] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD size 20, SAD count 0 <7>[ 51.658869] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] VRR capable: no <7>[ 51.658986] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 51.659141] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 51.660756] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] probed modes: <7>[ 51.660764] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 51.660767] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:DP-1] <7>[ 51.660770] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:515:DP-1] <7>[ 51.664999] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:DP-1] disconnected <7>[ 51.665005] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] <7>[ 51.665008] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1] <7>[ 51.669242] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected <7>[ 51.669247] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] <7>[ 51.669250] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:533:DP-2] <7>[ 51.669568] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 51.669779] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] disconnected <7>[ 51.669783] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-2] <7>[ 51.669785] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:542:HDMI-A-2] <7>[ 51.670085] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7>[ 51.674327] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-2] disconnected <7>[ 51.674331] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:546:DP-3] <7>[ 51.674334] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:546:DP-3] <7>[ 51.674551] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 51.674743] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:546:DP-3] disconnected <7>[ 51.674746] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:555:DP-4] <7>[ 51.674748] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:555:DP-4] <7>[ 51.674957] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 51.675159] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:555:DP-4] disconnected <7>[ 51.675162] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:eDP-1] enabled? yes <7>[ 51.675165] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:515:DP-1] enabled? no <7>[ 51.675166] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:527:HDMI-A-1] enabled? no <7>[ 51.675168] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:DP-2] enabled? no <7>[ 51.675170] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:HDMI-A-2] enabled? no <7>[ 51.675172] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:546:DP-3] enabled? no <7>[ 51.675173] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:555:DP-4] enabled? no <7>[ 51.675271] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 51.675288] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:eDP-1] found preferred mode: 2880x1800 <7>[ 51.675291] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 51.675318] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7>[ 51.679486] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 51.690359] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 51.690376] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 51.690892] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] <7>[ 51.690910] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:506:eDP-1] <7>[ 51.692288] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 51.692847] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 51.692763] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 51.693053] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 51.693300] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 51.693722] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 51.693730] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD monitor <7>[ 51.693755] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD size 20, SAD count 0 <7>[ 51.693847] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] VRR capable: no <7>[ 51.694053] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 51.694245] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 51.695250] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] probed modes: <7>[ 51.695265] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 51.695269] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:DP-1] <7>[ 51.695272] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:515:DP-1] <7>[ 51.698887] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c] <7>[ 51.699562] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:DP-1] disconnected <7>[ 51.699569] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] <7>[ 51.699573] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1] <7>[ 51.703766] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected <7>[ 51.703772] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] <7>[ 51.703775] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:533:DP-2] <7>[ 51.704206] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] disconnected <7>[ 51.704212] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-2] <7>[ 51.704216] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:542:HDMI-A-2] <7>[ 51.708572] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-2] disconnected <7>[ 51.708577] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:546:DP-3] <7>[ 51.708580] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:546:DP-3] <7>[ 51.708833] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:546:DP-3] disconnected <7>[ 51.708836] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:555:DP-4] <7>[ 51.708838] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:555:DP-4] <7>[ 51.709075] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:555:DP-4] disconnected <7>[ 51.709081] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:eDP-1] enabled? yes <7>[ 51.709094] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:515:DP-1] enabled? no <7>[ 51.709098] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:527:HDMI-A-1] enabled? no <7>[ 51.709101] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:DP-2] enabled? no <7>[ 51.709103] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:HDMI-A-2] enabled? no <7>[ 51.709106] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:546:DP-3] enabled? no <7>[ 51.709109] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:555:DP-4] enabled? no <7>[ 51.709226] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 51.709245] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:eDP-1] found preferred mode: 2880x1800 <7>[ 51.709248] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 51.709279] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7>[ 51.709583] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 51.735448] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 51.735599] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 51.738453] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509 <7>[ 51.768265] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 51.768349] [IGT] i915_module_load: finished subtest load, SUCCESS <7>[ 51.768582] [IGT] i915_module_load: exiting, ret=0 <7>[ 52.729540] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 52.729640] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 52.729781] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4 <7>[ 52.729863] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 54.202913] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 turning VDD off <7>[ 54.203993] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 <7>[ 54.204579] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 54.205434] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 54.205872] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02