Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.02 seconds
Igt-Version 
IGT-Version: 2.3-g1022f2615 (x86_64) (Linux: 6.19.0-rc4-CI_DRM_17775-g1124404e817b+ x86_64)
Out 
Using IGT_SRANDOM=1767779693 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.023s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.023s)
Dmesg
<6> [238.963023] Console: switching to colour dummy device 80x25
<6> [238.964052] [IGT] kms_force_connector_basic: executing
<7> [239.158613] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [239.159473] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [239.159966] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [239.160789] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:75:VGA-1] force updated from 0 to 0 or reprobing
<7> [239.160801] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [239.160810] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [239.161098] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [239.161388] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [239.161835] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [239.162090] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [239.162547] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [239.162805] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [239.162813] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [239.163069] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [239.164448] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [239.164457] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [239.164717] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [239.164976] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<7> [239.165047] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [239.165055] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [239.165448] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [239.165712] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [239.166128] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [239.166405] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [239.166844] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [239.167098] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [239.167105] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [239.167419] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [239.168708] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [239.168716] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [239.168973] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [239.169251] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<7> [239.169392] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [239.169400] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [239.169668] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [239.169925] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [239.170326] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [239.170581] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [239.170981] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [239.171259] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [239.171268] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [239.171559] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [239.172834] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [239.172841] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [239.173096] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [239.173411] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<6> [239.174253] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [239.174746] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:75:VGA-1] force updated from 0 to 2 or reprobing
<7> [239.174758] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [239.174767] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] status updated from disconnected to connected
<7> [239.174796] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [239.174892] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [239.175099] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [239.175527] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [239.176057] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [239.176382] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [239.176406] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [239.176668] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [239.178035] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [239.178051] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [239.178498] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] probed modes:
<7> [239.178510] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [239.178522] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [239.178532] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [239.178539] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [239.178545] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [239.178612] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [239.178790] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [239.179059] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [239.179555] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [239.179829] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [239.179845] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [239.180105] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [239.181478] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [239.181496] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [239.181860] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] probed modes:
<7> [239.181868] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [239.181874] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [239.181880] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [239.181886] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [239.181891] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [239.182198] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:75:VGA-1] EDID override set
<7> [239.182270] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [239.182354] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:75:VGA-1] ELD monitor IGT
<7> [239.182364] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:75:VGA-1] ELD size 24, SAD count 0
<7> [239.182630] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [239.182645] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [239.182655] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] probed modes:
<7> [239.182661] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [239.182667] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [239.182672] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [239.182678] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [239.182683] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [239.182689] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [239.182895] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:75:VGA-1] EDID override set
<7> [239.182932] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [239.182977] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:75:VGA-1] ELD monitor IGT
<7> [239.182982] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:75:VGA-1] ELD size 24, SAD count 0
<7> [239.182987] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:75:VGA-1] EDID changed, epoch counter 56
<7> [239.183145] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [239.183156] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] probed modes:
<7> [239.183161] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [239.183167] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [239.183173] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [239.183179] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [239.183184] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [239.183489] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:75:VGA-1] EDID override reset
<7> [239.183549] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [239.183739] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [239.184033] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [239.184505] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [239.184787] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [239.184803] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [239.185062] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [239.186500] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [239.186518] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [239.186883] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [239.186899] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [239.186910] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] probed modes:
<7> [239.186917] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [239.186923] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [239.186929] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [239.186934] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [239.186940] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [239.187382] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:75:VGA-1] force updated from 2 to 0 or reprobing
<7> [239.187392] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [239.187399] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [239.187683] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [239.187942] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [239.188348] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [239.188640] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [239.189048] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [239.189375] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [239.189386] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [239.189704] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [239.191028] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [239.191036] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [239.191321] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [239.191654] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] status updated from connected to disconnected
<7> [239.191670] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<7> [239.191684] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [239.191774] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [239.191789] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:75:VGA-1] EDID changed, epoch counter 58
<7> [239.191891] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [239.191899] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [239.192177] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [239.192503] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [239.193129] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [239.193567] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [239.194117] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [239.194577] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [239.194589] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [239.194992] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [239.196728] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [239.196742] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [239.197157] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [239.197658] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<6> [239.199093] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [239.199992] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [239.201112] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:71:LVDS-1] force updated from 0 to 0 or reprobing
<7> [239.201126] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1]
<7> [239.201145] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD monitor
<7> [239.201155] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD size 20, SAD count 0
<7> [239.201311] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1] probed modes:
<7> [239.201321] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [239.201394] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1]
<7> [239.201408] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD monitor
<7> [239.201416] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD size 20, SAD count 0
<7> [239.201532] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1] probed modes:
<7> [239.201540] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [239.201794] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:71:LVDS-1] EDID override reset
<7> [239.201841] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1]
<7> [239.201853] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD monitor
<7> [239.201861] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD size 20, SAD count 0
<7> [239.201963] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1] probed modes:
<7> [239.201971] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [239.202416] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:75:VGA-1] force updated from 0 to 0 or reprobing
<7> [239.202428] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [239.202439] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [239.202857] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [239.203286] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [239.203873] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [239.204307] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [239.204875] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [239.205325] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [239.205336] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [239.205727] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [239.208356] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [239.208371] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [239.208771] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [239.209144] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<7> [239.209275] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [239.209288] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [239.209692] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [239.210066] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [239.210681] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [239.211054] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [239.211629] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [239.212000] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [239.212009] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [239.212427] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [239.214114] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [239.214125] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [239.214541] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [239.214935] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<7> [239.215308] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:75:VGA-1] EDID override reset
<7> [239.215370] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [239.215383] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [239.215681] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [239.215941] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [239.216359] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [239.216618] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [239.217039] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [239.217447] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [239.217456] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [239.217829] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [239.219533] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [239.219544] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [239.219920] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [239.220371] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<7> [239.220853] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:78:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [239.220866] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1]
<7> [239.220877] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:78:HDMI-A-1]
<7> [239.272775] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [239.289297] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [239.289310] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [239.289690] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [239.305296] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [239.305308] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [239.305772] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1] disconnected
<7> [239.306025] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1]
<7> [239.306049] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:78:HDMI-A-1]
<7> [239.358344] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [239.374285] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [239.374295] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [239.374545] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [239.390279] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [239.390291] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [239.390583] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1] disconnected
<7> [239.390833] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:78:HDMI-A-1] EDID override reset
<7> [239.390866] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1]
<7> [239.390874] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:78:HDMI-A-1]
<7> [239.442874] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [239.459322] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [239.459339] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [239.459744] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [239.475269] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [239.475279] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [239.475546] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1] disconnected
<7> [239.475785] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:86:DP-1] EDID override reset
<7> [239.475817] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:86:DP-1]
<7> [239.475824] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:86:DP-1]
<7> [239.480121] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:86:DP-1] disconnected
<7> [239.480608] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:91:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [239.480619] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2]
<7> [239.480627] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:91:HDMI-A-2]
<7> [239.481156] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [239.481530] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [239.482049] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [239.482406] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [239.482415] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [239.482767] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [239.484271] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [239.484280] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [239.484544] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2] disconnected
<7> [239.484618] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2]
<7> [239.484625] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:91:HDMI-A-2]
<7> [239.485049] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [239.485349] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [239.485816] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [239.486070] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [239.486077] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [239.486358] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [239.487670] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [239.487678] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [239.487936] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2] disconnected
<7> [239.488144] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:91:HDMI-A-2] EDID override reset
<7> [239.488176] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2]
<7> [239.488183] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:91:HDMI-A-2]
<7> [239.488666] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [239.488926] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [239.489344] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [239.489599] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [239.489606] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [239.489856] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [239.491150] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [239.491158] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [239.491489] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2] disconnected
<7> [239.491839] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:95:HDMI-A-3] force updated from 0 to 0 or reprobing
<7> [239.491848] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3]
<7> [239.491855] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-3]
<7> [239.492298] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [239.492565] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [239.492978] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [239.493264] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [239.493271] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [239.493563] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [239.494881] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [239.494889] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [239.495149] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3] disconnected
<7> [239.495209] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3]
<7> [239.495238] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-3]
<7> [239.495703] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [239.495956] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [239.496366] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [239.496625] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [239.496631] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [239.496881] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [239.498165] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [239.498173] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [239.498469] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3] disconnected
<7> [239.498718] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:95:HDMI-A-3] EDID override reset
<7> [239.498752] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3]
<7> [239.498759] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-3]
<7> [239.499188] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [239.499488] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [239.499939] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [239.500193] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [239.500199] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [239.500491] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [239.501821] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [239.501829] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [239.502088] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3] disconnected
<7> [239.502326] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:99:DP-2] EDID override reset
<7> [239.502378] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:99:DP-2]
<7> [239.502389] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:99:DP-2]
<7> [239.506688] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:99:DP-2] disconnected
<7> [239.506889] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:103:DP-3] EDID override reset
<7> [239.506921] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-3]
<7> [239.506928] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-3]
<7> [239.511250] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-3] disconnected
<6> [239.513417] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [239.514042] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [239.517763] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [239.517785] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [239.517995] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1]
<7> [239.518025] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD monitor
<7> [239.518040] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD size 20, SAD count 0
<7> [239.518280] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1] probed modes:
<7> [239.518293] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [239.518310] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [239.518324] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [239.518944] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [239.519704] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [239.520845] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [239.521153] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [239.521742] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [239.522006] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [239.522014] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [239.522333] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [239.523681] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [239.523689] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [239.523945] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [239.524204] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<7> [239.524246] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1]
<7> [239.524259] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:78:HDMI-A-1]
<7> [239.575892] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [239.592280] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [239.592306] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [239.592562] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [239.608271] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [239.608288] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [239.608545] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1] disconnected
<7> [239.608557] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:86:DP-1]
<7> [239.608564] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:86:DP-1]
<7> [239.612844] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:86:DP-1] disconnected
<7> [239.612864] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2]
<7> [239.612876] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:91:HDMI-A-2]
<7> [239.613614] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [239.613965] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [239.614514] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [239.614857] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [239.614866] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [239.615195] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [239.616678] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [239.616690] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [239.616977] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2] disconnected
<7> [239.616987] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3]
<7> [239.616994] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-3]
<7> [239.617453] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [239.617710] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [239.618126] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [239.618433] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [239.618443] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [239.618733] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [239.620046] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [239.620054] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [239.620343] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3] disconnected
<7> [239.620353] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:99:DP-2]
<7> [239.620360] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:99:DP-2]
<7> [239.624702] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:99:DP-2] disconnected
<7> [239.624721] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-3]
<7> [239.624733] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-3]
<7> [239.629314] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-3] disconnected
<7> [239.629337] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:71:LVDS-1] enabled? yes
<7> [239.629348] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:75:VGA-1] enabled? no
<7> [239.629355] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:78:HDMI-A-1] enabled? no
<7> [239.629363] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:86:DP-1] enabled? no
<7> [239.629370] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:91:HDMI-A-2] enabled? no
<7> [239.629377] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:95:HDMI-A-3] enabled? no
<7> [239.629384] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:99:DP-2] enabled? no
<7> [239.629391] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:103:DP-3] enabled? no
<7> [239.629438] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [239.629471] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:71:LVDS-1] found preferred mode: 1366x768
<7> [239.629479] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1366x768 config
<7> [239.629514] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:51:pipe A] desired mode 1366x768 set (0,0)
<7> [239.634129] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [239.651700] Console: switching to colour frame buffer device 170x48
Created at 2026-01-07 12:48:58