igt@i915_pm_rpm@module-reload on fi-skl-6600u@IGT

Detail	Value
Duration	12.76 seconds
Igt-Version	IGT-Version: 2.3-g2997c9167 (x86_64) (Linux: 6.19.0-rc4-CI_DRM_17766-gf5136cded03e+ x86_64)
Out	Using IGT_SRANDOM=1767619376 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff888120d31818 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] hsw_get_pipe_config+0x1b9/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x740 [i915] intel_atomic_commit_tail+0x1276/0x1cb0 [i915] intel_atomic_commit+0x2e8/0x330 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x407/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 __x64_sys_ioctl+0xa5/0x100 Starting subtest: module-reload Reloading i915 with disable_display=1 mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 2 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff888104b59818 has 1/2 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get+0x1a/0x30 [i915] intel_display_rpm_get+0x1f/0x30 [i915] intel_display_power_get+0x22/0x70 [i915] intel_audio_component_get_power+0x2f/0x180 [i915] snd_hdac_display_power+0x8a/0x1c0 [snd_hda_core] azx_probe_continue+0x24f/0x9f0 [snd_hda_intel] azx_probe_work+0x15/0x20 [snd_hda_intel] process_one_work+0x22e/0x6b0 worker_thread+0x1e8/0x3d0 kthread+0x11f/0x250 ret_from_fork+0x344/0x3a0 ret_from_fork_asm+0x1a/0x30 ref_tracker: intel_runtime_pm@ffff888104b59818 has 1/2 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get+0x1a/0x30 [i915] intel_display_rpm_get+0x1f/0x30 [i915] intel_display_power_get+0x22/0x70 [i915] intel_pps_vdd_on_unlocked+0xbd/0x360 [i915] intel_dp_aux_xfer+0x12b/0x960 [i915] intel_dp_aux_transfer+0xd4/0x330 [i915] drm_dp_dpcd_access+0xc3/0x160 [drm_display_helper] drm_dp_dpcd_read+0x87/0x160 [drm_display_helper] intel_alpm_init+0x39/0x90 [i915] intel_dp_init_connector+0x9c4/0x14e0 [i915] intel_ddi_init+0xd03/0x1220 [i915] intel_bios_for_each_encoder+0x39/0x60 [i915] intel_setup_outputs+0x1f4/0xc20 [i915] intel_display_driver_probe_nogem+0x110/0x1e0 [i915] Reloading i915 with mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff88810db41818 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] hsw_get_pipe_config+0x1b9/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x740 [i915] intel_atomic_commit_tail+0x1276/0x1cb0 [i915] intel_atomic_commit+0x2e8/0x330 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x407/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 __x64_sys_ioctl+0xa5/0x100 Subtest module-reload: SUCCESS (12.757s)
Err	Starting subtest: module-reload Subtest module-reload: SUCCESS (12.757s)
Dmesg	<6> [276.583348] Console: switching to colour dummy device 80x25 <6> [276.585036] [IGT] i915_pm_rpm: executing <7> [276.587974] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [276.588840] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [276.588853] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [276.589435] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [276.589794] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [276.590031] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [276.590303] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [276.590312] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [276.590319] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [276.590354] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no <7> [276.590630] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [276.590942] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [276.592886] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes: <7> [276.592899] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [276.592910] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [276.593009] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [276.593017] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [276.597387] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [276.597481] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [276.597489] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [276.598239] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [276.598513] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [276.599043] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [276.599440] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [276.599450] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [276.599764] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [276.602827] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [276.602836] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [276.603087] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [276.603194] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [276.603202] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [276.607569] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [276.607655] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [276.607663] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [276.608164] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [276.608413] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [276.608907] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [276.609153] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [276.609160] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [276.609374] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [276.612441] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [276.612449] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [276.612711] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [276.619421] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [276.619433] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [276.623779] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [276.624475] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [276.624488] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [276.625028] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [276.625263] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [276.625715] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [276.625999] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [276.626006] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [276.626220] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [276.629301] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [276.629320] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [276.629618] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [276.630267] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [276.630275] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [276.634651] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [276.635633] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [276.635646] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [276.636284] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [276.636645] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [276.637159] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [276.637545] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [276.637555] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [276.637898] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [276.641869] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [276.641881] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [276.642302] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [276.643133] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [276.643145] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [276.643607] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [276.643976] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [276.644341] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [276.644766] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [276.644776] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [276.644784] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [276.644819] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no <7> [276.645199] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [276.645577] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [276.646943] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes: <7> [276.646959] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [276.646971] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [276.647016] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [276.647026] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [276.651542] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [276.651587] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [276.651598] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [276.652224] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [276.652628] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [276.653183] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [276.653580] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [276.653590] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [276.653924] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [276.657140] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [276.657151] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [276.657566] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [276.657609] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [276.657619] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [276.662076] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [276.662117] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [276.662127] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [276.662778] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [276.663130] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [276.663706] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [276.664088] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [276.664097] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [276.664476] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [276.667710] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [276.667720] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [276.668123] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [276.668889] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:143] <7> [276.907587] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [277.723754] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:57:pipe A] <7> [277.724263] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [277.725461] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [277.726240] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [277.726675] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [277.727095] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [277.727535] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [277.727961] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [277.728361] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [277.728776] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [277.729180] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [277.729584] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [277.729967] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [277.730350] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [277.730766] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [277.731153] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [277.731551] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [277.731940] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [277.732325] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [277.732738] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [277.733131] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [277.733533] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [277.733917] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [277.734302] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [277.734702] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [277.735106] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [277.735511] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [277.735897] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [277.736281] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [277.736680] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [277.736990] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [277.737231] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [277.737493] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [277.737772] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [277.738012] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [277.738251] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [277.738510] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [277.738796] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [277.739038] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [277.739280] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [277.739541] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset <7> [277.739839] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0 <7> [277.740139] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [277.740395] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [277.740654] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [277.740927] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [277.741159] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [277.741393] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [277.741720] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [277.742109] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [277.742414] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz <7> [277.742744] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [277.743030] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [277.743271] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [277.743534] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset] <7> [277.743839] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [277.744081] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [277.744319] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [277.744791] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [277.746307] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [277.953694] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0 <7> [277.955593] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [277.970805] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off <7> [277.971323] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [277.972087] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time <7> [277.972681] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short <7> [277.973493] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [278.025296] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [278.025259] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [278.026658] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long <7> [278.027243] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [278.027920] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [278.031112] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [278.031489] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A] <7> [278.032464] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [278.033393] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [278.034588] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [278.037354] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A] <7> [278.038398] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B] <7> [278.039311] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A] <7> [278.040376] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B] <7> [278.041239] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C] <7> [278.042271] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C] <7> [278.043190] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A] <7> [278.044243] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B] <7> [278.045100] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C] <7> [278.046275] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1] <7> [278.048522] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [278.052105] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:82:pipe B] <7> [278.053493] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:107:pipe C] <7> [278.153928] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [278.155726] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [278.157011] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [278.158551] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [278.161773] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [278.185847] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [278.265366] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:109:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [278.266545] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:108:DDI A/PHY A][CRTC:57:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [278.268098] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000 <7> [278.269693] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [278.272176] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:108:DDI A/PHY A] [CRTC:57:pipe A] <7> [278.273995] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [278.275585] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [278.277176] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [278.278872] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [278.280513] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [278.282088] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [278.283678] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [278.285278] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [278.286822] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [278.288371] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [278.289942] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [278.291528] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [278.292955] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [278.294411] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [278.295836] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [278.297270] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [278.298732] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [278.300088] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [278.301483] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [278.302832] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [278.304199] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [278.305550] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [278.306914] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [278.308260] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [278.309618] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [278.310973] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [278.312334] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [278.313687] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [278.315038] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [278.316392] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [278.317755] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [278.319117] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [278.320508] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [278.321855] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [278.323217] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [278.324568] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [278.325962] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [278.327342] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [278.328696] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [278.329962] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset <7> [278.331015] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [278.331907] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [278.332787] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [278.333666] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [278.334552] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [278.335419] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [278.336301] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [278.337376] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [278.338378] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [278.339157] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [278.339832] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [278.340503] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [278.341152] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:57:pipe A] allocated DPLL 0 <7> [278.341834] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:57:pipe A] reserving DPLL 0 <7> [278.342514] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: yes [modeset] <7> [278.343167] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [278.343862] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [278.344530] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [278.345153] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [278.345858] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [278.346528] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [278.347179] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [278.347856] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [278.348376] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [278.348914] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [278.349432] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [278.349975] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [278.350511] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [278.351032] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [278.351575] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [278.352095] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [278.352630] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [278.353147] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [278.353685] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [278.354202] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [278.354747] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [278.355266] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [278.355803] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [278.356323] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [278.356863] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [278.357298] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [278.357755] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [278.358192] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [278.358655] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [278.359025] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [278.359474] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [278.359903] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [278.360337] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [278.360792] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [278.361224] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [278.361690] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [278.362123] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [278.362580] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [278.363019] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [278.363476] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [278.363906] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [278.364339] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [278.364792] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [278.365224] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:110] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [278.365678] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [278.366074] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [278.366449] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [278.366832] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [278.378522] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [278.388539] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [278.388772] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [278.389156] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [278.389749] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [278.390442] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [278.391302] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A] <7> [278.391623] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B] <7> [278.391836] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A] <7> [278.392043] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B] <7> [278.392249] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C] <7> [278.392577] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C] <7> [278.392904] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A] <7> [278.393229] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B] <7> [278.393569] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C] <7> [278.394117] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:57:pipe A] <7> [278.394355] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [278.394779] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power on <7> [278.395148] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (132 ms remaining) <7> [278.529935] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [278.580700] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [278.581877] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power on <7> [278.582947] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003 <7> [278.632252] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [278.633236] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long <7> [278.634122] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [278.636679] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [278.782601] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [278.783900] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [278.786805] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [278.790148] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on <7> [278.792050] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b <7> [278.798072] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [278.799295] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [278.803607] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [278.805458] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [278.806975] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [278.810817] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Clock recovery OK <7> [278.812187] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [278.813346] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [278.816585] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [278.817540] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [278.818560] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [278.821681] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [278.822893] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [278.824051] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [278.827300] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [278.828279] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [278.830476] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [278.833235] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [278.834276] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [278.836111] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 37 <7> [278.849070] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [278.856060] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1] <7> [278.857267] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [278.862181] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [278.863083] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [278.868269] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [278.870812] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <6> [278.872610] [IGT] i915_pm_rpm: starting subtest module-reload <7> [278.872282] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [278.874128] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [278.875783] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [278.875827] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [278.877406] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [278.884303] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [278.884355] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [278.886188] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [278.892068] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [278.894121] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [278.895667] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [278.898079] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [278.899861] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [278.899904] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [278.901551] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [278.907592] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [278.907622] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [279.014203] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [279.014948] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [279.027687] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [279.053270] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [279.053733] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [279.066655] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [279.112355] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [279.117118] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [279.132422] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [279.133097] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [279.136604] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [279.137230] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [279.138048] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [279.138870] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [279.139576] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [279.140214] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [279.140851] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [279.142397] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [279.248572] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [279.249434] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [279.249823] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [279.250363] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [279.252774] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:110] is removed <7> [279.253126] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [279.253742] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [279.254265] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [279.255181] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [279.255767] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [279.256713] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [279.265917] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [279.268028] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [279.268642] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [279.269189] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [279.269818] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [279.270362] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [279.270967] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [279.271563] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [279.272002] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [279.272475] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [279.273037] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [279.273478] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [279.274062] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [279.274475] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [279.274992] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [279.275406] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [279.275896] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [279.276322] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [279.276807] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [279.277241] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [279.277810] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [279.278316] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [279.278810] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [279.279312] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [279.279801] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [279.280296] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [279.280772] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [279.281290] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [279.281764] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [279.282324] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [279.282940] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [279.283414] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [279.284010] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [279.284461] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [279.284943] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [279.285368] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [279.285842] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [279.286265] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [279.286809] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [279.287218] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [279.287869] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset <7> [279.288350] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0 <7> [279.289012] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [279.289481] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [279.290083] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [279.290494] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [279.290926] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [279.291423] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [279.291879] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset] <7> [279.292396] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [279.292888] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [279.293395] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [279.294862] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [279.497989] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0 <7> [279.500356] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [279.519233] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off <7> [279.519756] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [279.520232] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time <7> [279.520820] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short <7> [279.521324] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [279.573267] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [279.573463] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [279.574430] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long <7> [279.575444] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [279.576241] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [279.576895] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A] <7> [279.577989] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [279.579210] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [279.580610] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [279.583731] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A] <7> [279.585136] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B] <7> [279.586323] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A] <7> [279.587972] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B] <7> [279.589155] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C] <7> [279.590583] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C] <7> [279.591815] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A] <7> [279.593259] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B] <7> [279.594371] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C] <7> [279.595819] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1] <7> [279.598453] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [279.665447] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [279.713595] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:109:eDP-1] removing connector from sysfs <7> [279.732410] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:117:DP-1] removing connector from sysfs <7> [279.741195] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:126:HDMI-A-1] removing connector from sysfs <7> [279.759238] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:132:DP-2] removing connector from sysfs <7> [279.764001] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:138:HDMI-A-2] removing connector from sysfs <7> [279.795743] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (279 ms remaining) <7> [280.081875] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [280.092745] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [280.693477] [IGT] Reloading i915 w/o display <5> [281.526272] Setting dangerous option force_probe - tainting kernel <6> [281.539171] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0 <7> [281.541046] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K <7> [281.541459] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [281.541746] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH <7> [281.542115] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [281.542570] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [281.543171] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [281.543516] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [281.544615] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [281.544972] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [281.545291] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [281.545609] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [281.545622] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [281.546414] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [281.546452] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [281.546754] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [281.547100] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7716 MiB [mem 0x00000000-0x1e24e6fff], io: n/a <7> [281.547411] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a <7> [281.548374] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018 <7> [281.548832] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [281.549083] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [281.549330] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [281.549624] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [281.558702] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [281.558983] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [281.559231] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [281.559500] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [281.559799] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [281.560208] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [281.560615] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no <7> [281.561024] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [281.561429] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [281.561785] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no <7> [281.562108] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes <7> [281.562467] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no <7> [281.562760] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3 <7> [281.563053] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [281.563311] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0 <7> [281.563566] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7> [281.564535] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [281.564852] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203 <7> [281.565178] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [281.565453] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [281.565748] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [281.566078] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [281.566345] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 848) <7> [281.566605] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [281.566889] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [281.567203] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [281.567463] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [281.567743] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136) <7> [281.568100] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [281.568367] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [281.568633] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [281.568921] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [281.569234] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [281.569493] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [281.569760] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [281.570071] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [281.570321] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [281.570571] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [281.570939] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [281.571215] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [281.571496] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [281.571806] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [281.572193] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [281.572471] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [281.572755] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [281.573069] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [281.573322] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [281.573634] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [281.574037] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [281.574306] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [281.574563] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [281.574858] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [281.575238] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [281.575498] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [281.575771] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [281.576092] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [281.577131] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <7> [281.578518] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [281.578880] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [281.579261] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [281.579673] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <6> [281.580890] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [281.581103] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [281.581709] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [281.582047] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [281.582301] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7> [281.582550] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec) <7> [281.582828] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec) <7> [281.583134] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec) <7> [281.583382] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec) <7> [281.583734] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec) <7> [281.584109] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec) <7> [281.584506] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec) <7> [281.584904] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec) <7> [281.585288] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec) <7> [281.585649] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec) <7> [281.585964] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec) <7> [281.586221] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec) <7> [281.586603] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec) <7> [281.587056] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec) <7> [281.587432] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec) <7> [281.591554] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available. <7> [281.595435] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [281.595903] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI A/PHY A] Using AUX CH A (VBT) <7> [281.596355] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:108:DDI A/PHY A] <7> [281.604916] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [281.605341] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [281.605764] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [281.606135] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [281.607352] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [281.607750] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [281.608121] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP <7> [281.608491] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [281.608890] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0 <7> [281.609204] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0 <7> [281.609914] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:108:DDI A/PHY A] initial power sequencer: PPS 0 <7> [281.610328] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [281.610704] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [281.611064] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [281.611419] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [281.611792] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [281.612195] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [281.615456] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on <7> [281.615911] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [281.616318] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [281.627818] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [281.628125] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [281.628379] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [281.835683] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [281.836539] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [281.838849] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00 <7> [281.844385] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [281.865404] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [281.865449] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [281.865476] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [281.866042] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [281.867709] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [281.869114] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:109:eDP-1] DRRS type: static <7> [281.871075] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:109:eDP-1] Using native PCH PWM for backlight control <7> [281.872718] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:109:eDP-1] backlight initialized, disabled, brightness 0/937 <7> [281.875024] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [281.876728] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [281.878037] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [281.879559] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [281.880885] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [281.882471] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [281.885368] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:116:DDI B/PHY B] Using AUX CH B (VBT) <7> [281.887208] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:116:DDI B/PHY B] <7> [281.891859] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [281.893324] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:116:DDI B/PHY B] <7> [281.894623] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:116:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [281.898330] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:131:DDI C/PHY C] Using AUX CH C (VBT) <7> [281.899920] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:131:DDI C/PHY C] <7> [281.903704] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [281.905174] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:131:DDI C/PHY C] <7> [281.906437] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:131:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [281.911348] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] hw state readout: disabled <7> [281.913436] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] hw state readout: disabled <7> [281.915577] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] hw state readout: disabled <7> [281.917142] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [281.918881] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] hw state readout: disabled, pipe A <7> [281.920394] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] hw state readout: disabled, pipe A <7> [281.922631] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] hw state readout: disabled, pipe B <7> [281.924258] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] hw state readout: disabled, pipe B <7> [281.925869] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] hw state readout: disabled, pipe B <7> [281.927596] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] hw state readout: disabled, pipe C <7> [281.929208] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] hw state readout: disabled, pipe C <7> [281.930932] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] hw state readout: disabled, pipe C <7> [281.932742] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI A/PHY A] hw state readout: disabled, pipe A <7> [281.934498] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:116:DDI B/PHY B] hw state readout: disabled, pipe A <7> [281.935991] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DP-MST A] hw state readout: disabled, pipe A <7> [281.937577] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST B] hw state readout: disabled, pipe B <7> [281.939032] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST C] hw state readout: disabled, pipe C <7> [281.941144] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:131:DDI C/PHY C] hw state readout: disabled, pipe A <7> [281.942599] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DP-MST A] hw state readout: disabled, pipe A <7> [281.944398] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST B] hw state readout: disabled, pipe B <7> [281.946053] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST C] hw state readout: disabled, pipe C <7> [281.947632] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [281.948946] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [281.949919] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [281.950933] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [281.952145] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:eDP-1] hw state readout: disabled <7> [281.953398] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:117:DP-1] hw state readout: disabled <7> [281.954521] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:126:HDMI-A-1] hw state readout: disabled <7> [281.955565] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:132:DP-2] hw state readout: disabled <7> [281.956609] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:138:HDMI-A-2] hw state readout: disabled <7> [281.957475] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [281.958062] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] min_cdclk 0 kHz <7> [281.958809] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] min_cdclk 0 kHz <7> [281.959439] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] min_cdclk 0 kHz <7> [281.960081] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] min_cdclk 0 kHz <7> [281.960772] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] min_cdclk 0 kHz <7> [281.961319] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] min_cdclk 0 kHz <7> [281.961939] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] min_cdclk 0 kHz <7> [281.962604] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] min_cdclk 0 kHz <7> [281.963216] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] min_cdclk 0 kHz <7> [281.964005] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] min_cdclk 0 kHz <7> [281.964594] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] min_cdclk 0 kHz <7> [281.965189] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:57:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [281.965865] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:82:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [281.966388] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:107:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [281.967207] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [setup_hw_state] <7> [281.967642] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [setup_hw_state] <7> [281.968107] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [setup_hw_state] <7> [281.968697] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [281.969291] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [281.969686] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [281.970141] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [281.970555] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7> [281.973924] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [281.974356] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [281.974805] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0 <7> [281.998593] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [281.998883] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [281.999082] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [281.999279] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [281.999478] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 0: start 0x8 <7> [281.999764] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 1: start 0x108 <7> [282.000147] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 2: start 0x208 <7> [282.000532] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 3: start 0x308 <7> [282.000947] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 4: start 0x3c8 <7> [282.001329] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 0: start 0x8 <7> [282.001631] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 1: start 0x108 <7> [282.001956] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 2: start 0x208 <7> [282.002314] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 3: start 0x308 <7> [282.002762] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 4: start 0x3c8 <7> [282.003150] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 0: start 0x8 <7> [282.003536] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 1: start 0x108 <7> [282.003941] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 2: start 0x208 <7> [282.004317] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 3: start 0x308 <7> [282.004675] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 4: start 0x3c8 <7> [282.005204] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [fastset] <7> [282.005464] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [fastset] <7> [282.005752] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [fastset] <7> [282.006245] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [282.006919] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:82:pipe B] <7> [282.007343] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:107:pipe C] <7> [282.007819] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [282.013901] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:109:eDP-1] adding connector to sysfs <7> [282.019276] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:109:eDP-1] backlight device intel_backlight registered <7> [282.019788] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:109:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [282.020990] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [282.023639] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:eDP-1] generating connector hotplug event <7> [282.023963] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:117:DP-1] adding connector to sysfs <7> [282.026453] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [282.029302] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:117:DP-1] generating connector hotplug event <7> [282.029456] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:126:HDMI-A-1] adding connector to sysfs <7> [282.030626] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:126:HDMI-A-1] generating connector hotplug event <7> [282.030783] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:132:DP-2] adding connector to sysfs <7> [282.031885] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [282.035836] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:132:DP-2] generating connector hotplug event <7> [282.035950] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:138:HDMI-A-2] adding connector to sysfs <7> [282.037026] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:138:HDMI-A-2] generating connector hotplug event <6> [282.037163] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7> [282.042995] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [282.075604] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [282.085878] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input35 <7> [282.087313] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [282.092078] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [282.092537] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:117:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [282.093759] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [282.094168] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:126:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [282.094584] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [282.095030] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:132:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [282.095446] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [282.095872] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:138:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [282.096279] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [282.096877] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:57:pipe A] not active, skipping <7> [282.097299] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:82:pipe B] not active, skipping <7> [282.097714] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:107:pipe C] not active, skipping <7> [282.098098] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config <7> [282.100043] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [282.101070] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [282.101230] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [282.101245] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [282.101656] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] status updated from unknown to disconnected <7> [282.101713] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] disconnected <7> [282.101734] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [282.101992] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:109:eDP-1] EDID changed, epoch counter 2 <7> [282.102021] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [282.102033] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [282.102431] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [282.102444] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [282.102455] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [282.102852] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [282.102865] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [282.102876] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [282.103260] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [282.103273] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [282.103284] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [282.103687] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [282.103703] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [282.103712] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? no <7> [282.103721] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no <7> [282.103729] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no <7> [282.103737] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no <7> [282.103745] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no <7> [282.103804] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [282.103824] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [282.103932] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [282.103947] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [282.106684] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9 <7> [282.107134] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0 <7> [282.107544] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7> [282.107990] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no <7> [282.108396] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no <7> [282.108855] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7> [282.109269] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7> [282.109699] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no <7> [282.110112] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7> [282.110525] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7> [282.110955] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7> [282.111369] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7> [282.111822] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7> [282.112231] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7> [282.112640] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7> [282.113091] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes <7> [282.113500] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7> [282.113950] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7> [282.114363] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7> [282.114814] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7> [282.115225] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no <7> [282.115634] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz <7> [282.116270] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [282.116412] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [282.116427] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [282.116850] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] disconnected <7> [282.116866] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [282.116877] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [282.117269] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [282.117282] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [282.117293] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [282.117704] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [282.117717] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [282.117728] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [282.118115] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [282.118128] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [282.118140] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [282.118531] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [282.118543] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [282.118551] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? no <7> [282.118560] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no <7> [282.118569] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no <7> [282.118578] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no <7> [282.118586] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no <7> [282.118650] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [282.118690] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [282.118788] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [282.119210] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [282.119324] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [282.120437] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7> [282.120898] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [282.121328] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [282.121775] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [282.122200] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [282.122619] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [282.123402] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9 <7> [282.123755] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9 <7> [282.124076] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9 <7> [282.124396] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0 <7> [282.124734] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0 <7> [282.125050] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2 <7> [282.125359] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21 <7> [282.125617] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000 <7> [282.125907] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE <7> [282.126171] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7> [282.126425] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7> [282.126761] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39 <7> [282.127079] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7> [282.127401] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7> [282.127740] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7> [282.128059] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7> [282.128380] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7> [282.128715] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7> [282.129033] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7> [282.129361] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7> [282.129803] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7> [282.130123] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no <7> [282.130430] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no <7> [282.130763] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7> [282.131081] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7> [282.131397] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7> [282.131745] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no <7> [282.132071] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no <7> [282.132397] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7> [282.132741] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7> [282.133060] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes <7> [282.133372] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7> [282.133709] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no <7> [282.134022] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7> [282.134336] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7> [282.134656] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no <7> [282.135000] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no <7> [282.135322] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no <7> [282.135640] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7> [282.135975] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no <7> [282.136292] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7> [282.136610] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7> [282.136940] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7> [282.137257] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7> [282.137574] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no <7> [282.137910] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes <7> [282.138228] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7> [282.138546] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7> [282.138874] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7> [282.139190] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7> [282.139505] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7> [282.139840] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403 <7> [282.140163] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001 <7> [282.140485] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3 <7> [282.140826] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007 <7> [282.141149] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000 <7> [282.141473] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000 <7> [282.141801] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24 <7> [282.142116] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8 <7> [282.142433] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7> [282.142765] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7> [282.143082] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes <6> [282.143398] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [282.143402] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [282.143406] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [282.158954] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6> [282.160942] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7> [282.161505] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [282.162328] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [282.164500] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [282.196513] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [282.196965] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [282.197339] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [282.197733] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [282.198088] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [282.198444] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [282.198818] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [282.199163] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [282.199504] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <6> [282.221713] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36 <6> [282.234349] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input37 <6> [282.237479] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input38 <7> [283.444263] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [284.420625] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD off <7> [284.420985] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [284.421245] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [284.421618] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [284.421910] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [284.422837] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [284.423295] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [284.423840] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [284.423825] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long <7> [284.424895] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [284.426122] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [284.433815] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [284.594139] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [284.618977] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [284.627030] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [284.627406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [284.627699] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [284.627978] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [284.628257] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [284.628503] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [284.628743] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [284.629111] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [284.629432] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [284.630225] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [284.630877] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [284.631857] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [284.643970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [284.644308] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [284.644580] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [284.644902] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [284.645631] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [284.758809] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [284.759188] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [284.760018] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [284.760626] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [284.763235] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [284.770266] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [284.770529] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [284.770745] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [284.771109] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [284.771477] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [284.771852] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [284.772203] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [284.772556] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [284.773265] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [284.774216] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [284.775066] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [284.775444] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [284.775813] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [284.776563] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [284.864499] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [284.865443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [284.867022] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [284.868684] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [284.870671] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [284.872043] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [284.873400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [284.874758] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [284.876344] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [284.936099] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [284.950553] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:109:eDP-1] removing connector from sysfs <7> [284.961326] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:117:DP-1] removing connector from sysfs <7> [284.964510] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:126:HDMI-A-1] removing connector from sysfs <7> [284.973648] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:132:DP-2] removing connector from sysfs <7> [284.974578] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:138:HDMI-A-2] removing connector from sysfs <7> [285.004968] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [285.005280] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [285.014990] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [285.476803] [IGT] Reloading i915 as normal <5> [286.420029] Setting dangerous option force_probe - tainting kernel <6> [286.432838] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0 <7> [286.434801] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K <7> [286.435210] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [286.435493] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH <7> [286.435755] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [286.436098] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [286.436702] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [286.437088] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [286.438419] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [286.438773] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [286.439120] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [286.439476] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [286.439490] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [286.440448] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [286.440506] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [286.440908] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [286.441285] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7716 MiB [mem 0x00000000-0x1e24e6fff], io: n/a <7> [286.441616] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a <7> [286.442629] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018 <7> [286.443137] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [286.443536] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [286.443950] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [286.444345] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [286.451898] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [286.452234] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [286.452491] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [286.452746] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [286.453089] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [286.453422] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [286.453689] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no <7> [286.453988] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [286.454329] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [286.454588] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no <7> [286.454845] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes <7> [286.455224] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no <7> [286.455551] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3 <7> [286.455807] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [286.456077] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0 <7> [286.456368] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7> [286.457208] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [286.457497] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203 <7> [286.457760] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [286.458062] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [286.458377] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [286.458637] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [286.458942] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 848) <7> [286.459330] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [286.459726] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [286.460138] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [286.460533] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [286.460876] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136) <7> [286.461151] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [286.461403] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [286.461726] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [286.462140] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [286.462533] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [286.462935] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [286.463311] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [286.463589] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [286.463840] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [286.464119] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [286.464470] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [286.464854] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [286.465260] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [286.465671] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [286.466139] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [286.466422] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [286.466684] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [286.467049] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [286.467432] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [286.467814] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [286.468320] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [286.468623] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [286.468894] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [286.469186] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [286.469667] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [286.470073] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [286.470463] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [286.470825] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [286.471776] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <7> [286.473245] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [286.473602] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [286.473872] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [286.474271] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [286.474633] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <6> [286.475055] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [286.475331] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [286.475695] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [286.475988] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7> [286.476286] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec) <7> [286.476534] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec) <7> [286.476781] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec) <7> [286.477041] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec) <7> [286.477330] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec) <7> [286.477578] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec) <7> [286.477826] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec) <7> [286.478095] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec) <7> [286.478415] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec) <7> [286.478787] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec) <7> [286.479190] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec) <7> [286.479566] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec) <7> [286.479988] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec) <7> [286.480331] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec) <7> [286.480579] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec) <7> [286.485300] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available. <7> [286.489020] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [286.489471] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI A/PHY A] Using AUX CH A (VBT) <7> [286.489916] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:108:DDI A/PHY A] <7> [286.495949] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [286.496367] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [286.496749] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [286.497213] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [286.497612] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [286.498026] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [286.498405] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP <7> [286.498780] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [286.499186] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0 <7> [286.499564] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0 <7> [286.502440] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:108:DDI A/PHY A] initial power sequencer: PPS 0 <7> [286.502876] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [286.503258] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [286.503619] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [286.503994] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [286.504350] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [286.504752] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [286.505390] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on <7> [286.505785] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [286.506236] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [286.516069] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [286.516393] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [286.516640] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [286.725714] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [286.726621] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [286.728540] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00 <7> [286.733216] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [286.754280] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [286.754320] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [286.754343] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [286.754671] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [286.755826] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [286.757522] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:109:eDP-1] DRRS type: static <7> [286.759551] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:109:eDP-1] Using native PCH PWM for backlight control <7> [286.761377] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:109:eDP-1] backlight initialized, disabled, brightness 0/937 <7> [286.763818] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [286.765464] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [286.767100] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [286.768736] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [286.770347] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [286.772043] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [286.775412] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:116:DDI B/PHY B] Using AUX CH B (VBT) <7> [286.777291] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:116:DDI B/PHY B] <7> [286.782711] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [286.784595] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:116:DDI B/PHY B] <7> [286.786274] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:116:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [286.790103] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:131:DDI C/PHY C] Using AUX CH C (VBT) <7> [286.792058] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:131:DDI C/PHY C] <7> [286.796345] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [286.798220] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:131:DDI C/PHY C] <7> [286.799884] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:131:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [286.804965] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] hw state readout: disabled <7> [286.807593] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] hw state readout: disabled <7> [286.810178] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] hw state readout: disabled <7> [286.812160] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [286.814178] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] hw state readout: disabled, pipe A <7> [286.816158] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] hw state readout: disabled, pipe A <7> [286.818106] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] hw state readout: disabled, pipe B <7> [286.820110] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] hw state readout: disabled, pipe B <7> [286.822083] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] hw state readout: disabled, pipe B <7> [286.824059] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] hw state readout: disabled, pipe C <7> [286.826003] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] hw state readout: disabled, pipe C <7> [286.827946] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] hw state readout: disabled, pipe C <7> [286.829824] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI A/PHY A] hw state readout: disabled, pipe A <7> [286.831746] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:116:DDI B/PHY B] hw state readout: disabled, pipe A <7> [286.833478] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DP-MST A] hw state readout: disabled, pipe A <7> [286.835037] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST B] hw state readout: disabled, pipe B <7> [286.836515] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST C] hw state readout: disabled, pipe C <7> [286.838298] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:131:DDI C/PHY C] hw state readout: disabled, pipe A <7> [286.840034] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DP-MST A] hw state readout: disabled, pipe A <7> [286.841804] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST B] hw state readout: disabled, pipe B <7> [286.843111] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST C] hw state readout: disabled, pipe C <7> [286.844368] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [286.845646] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [286.848181] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [286.849469] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [286.850970] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:eDP-1] hw state readout: disabled <7> [286.852087] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:117:DP-1] hw state readout: disabled <7> [286.859084] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:126:HDMI-A-1] hw state readout: disabled <7> [286.860115] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:132:DP-2] hw state readout: disabled <7> [286.860954] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:138:HDMI-A-2] hw state readout: disabled <7> [286.861576] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [286.862236] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] min_cdclk 0 kHz <7> [286.862863] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] min_cdclk 0 kHz <7> [286.863492] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] min_cdclk 0 kHz <7> [286.864141] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] min_cdclk 0 kHz <7> [286.864757] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] min_cdclk 0 kHz <7> [286.865410] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] min_cdclk 0 kHz <7> [286.866048] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] min_cdclk 0 kHz <7> [286.866669] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] min_cdclk 0 kHz <7> [286.867297] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] min_cdclk 0 kHz <7> [286.867938] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] min_cdclk 0 kHz <7> [286.868556] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] min_cdclk 0 kHz <7> [286.869208] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:57:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [286.869751] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:82:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [286.870266] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:107:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [286.872359] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [setup_hw_state] <7> [286.872930] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [setup_hw_state] <7> [286.873423] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [setup_hw_state] <7> [286.873933] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [286.874590] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [286.875036] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [286.875481] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [286.876992] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7> [286.881009] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [286.881507] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [286.881961] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0 <7> [286.909822] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [286.910130] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [286.910344] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [286.910555] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [286.910769] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 0: start 0x8 <7> [286.911083] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 1: start 0x108 <7> [286.911502] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 2: start 0x208 <7> [286.911939] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 3: start 0x308 <7> [286.912364] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 4: start 0x3c8 <7> [286.912788] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 0: start 0x8 <7> [286.913220] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 1: start 0x108 <7> [286.913646] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 2: start 0x208 <7> [286.914093] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 3: start 0x308 <7> [286.914519] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 4: start 0x3c8 <7> [286.914956] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 0: start 0x8 <7> [286.915378] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 1: start 0x108 <7> [286.915802] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 2: start 0x208 <7> [286.916235] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 3: start 0x308 <7> [286.916661] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 4: start 0x3c8 <7> [286.917501] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [fastset] <7> [286.917982] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [fastset] <7> [286.918388] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [fastset] <7> [286.919176] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [286.920195] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:82:pipe B] <7> [286.920926] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:107:pipe C] <7> [286.921608] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [286.928684] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:109:eDP-1] adding connector to sysfs <7> [286.930614] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:109:eDP-1] backlight device intel_backlight registered <7> [286.931149] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:109:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [286.932200] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [286.936574] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:eDP-1] generating connector hotplug event <7> [286.936735] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:117:DP-1] adding connector to sysfs <7> [286.940330] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [286.944953] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:117:DP-1] generating connector hotplug event <7> [286.945114] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:126:HDMI-A-1] adding connector to sysfs <7> [286.946746] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:126:HDMI-A-1] generating connector hotplug event <7> [286.947436] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:132:DP-2] adding connector to sysfs <7> [286.949472] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [286.951814] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:132:DP-2] generating connector hotplug event <7> [286.952100] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:138:HDMI-A-2] adding connector to sysfs <7> [286.953172] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:138:HDMI-A-2] generating connector hotplug event <6> [286.953268] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7> [286.958544] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [286.991483] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [287.000707] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input39 <7> [287.004630] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [287.009309] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [287.011053] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:57:pipe A] not active, skipping <7> [287.011474] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:82:pipe B] not active, skipping <7> [287.011814] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:107:pipe C] not active, skipping <7> [287.012175] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config <7> [287.013685] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [287.014228] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:117:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [287.014677] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [287.016010] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [287.016436] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [287.017039] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [287.017495] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [287.017507] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [287.017920] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [287.021167] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [287.023032] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [287.023044] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [287.023556] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:126:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [287.024184] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [287.028723] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:132:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [287.029218] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [287.029898] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [287.030346] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [287.031010] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [287.031457] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [287.031468] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [287.031877] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [287.035343] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [287.035356] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [287.035806] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:138:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [287.036958] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [287.037398] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [287.037414] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [287.039146] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [287.039575] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [287.040007] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [287.041057] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [287.041072] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [287.041080] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [287.041119] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no <7> [287.041533] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [287.041954] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [287.044134] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] status updated from unknown to connected <7> [287.044173] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [287.044588] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes: <7> [287.044600] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [287.044611] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [287.044624] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [287.044636] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [287.049341] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [287.049361] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [287.049373] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [287.050934] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [287.051364] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [287.051962] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [287.052533] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [287.052545] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [287.053039] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [287.056521] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [287.056534] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [287.057076] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [287.057092] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [287.057104] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [287.061638] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [287.061658] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [287.061670] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [287.062508] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [287.062931] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [287.063514] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [287.064031] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [287.064044] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [287.064451] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [287.067962] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [287.067977] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [287.068459] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [287.068474] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? yes <7> [287.068484] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no <7> [287.068493] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no <7> [287.068501] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no <7> [287.068509] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no <7> [287.068568] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [287.068603] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] found preferred mode: 3200x1800 <7> [287.068612] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [287.068645] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:57:pipe A] desired mode 3200x1800 set (0,0) <7> [287.068782] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [287.068839] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] no BIOS fb, allocating a new one <7> [287.075644] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 3200x1800 fb: 0x00180000 <6> [287.077193] fbcon: i915drmfb (fb0) is primary device <6> [287.078437] Console: switching to colour frame buffer device 200x56 <6> [287.078454] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7> [287.078468] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9 <7> [287.078924] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0 <7> [287.079268] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7> [287.079553] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no <7> [287.079940] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no <7> [287.080355] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7> [287.080770] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7> [287.081198] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no <7> [287.081600] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7> [287.082035] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7> [287.082443] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7> [287.082830] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7> [287.083264] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7> [287.083677] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7> [287.084099] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7> [287.084508] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes <7> [287.084927] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7> [287.085332] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7> [287.085739] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7> [287.086153] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7> [287.086557] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no <7> [287.086977] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz <7> [287.087769] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [287.087789] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [287.089306] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [287.089333] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [287.090419] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [287.090832] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [287.091230] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [287.091750] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [287.091762] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [287.091780] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [287.091842] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no <7> [287.092246] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [287.092637] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [287.094872] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes: <7> [287.094892] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [287.094901] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [287.094930] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [287.094943] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [287.096169] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7> [287.096526] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [287.096869] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [287.097228] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [287.097566] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [287.097903] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [287.100073] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [287.100095] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [287.100108] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [287.101412] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9 <7> [287.101710] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9 <7> [287.101942] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9 <7> [287.102168] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0 <7> [287.102483] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0 <7> [287.102804] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2 <7> [287.103138] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21 <7> [287.103459] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000 <7> [287.103779] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE <7> [287.104104] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7> [287.104384] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7> [287.104587] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39 <7> [287.104827] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7> [287.105168] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7> [287.105491] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7> [287.105811] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7> [287.106139] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7> [287.106458] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7> [287.106775] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7> [287.107099] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7> [287.107295] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7> [287.107488] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no <7> [287.107681] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no <7> [287.107872] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7> [287.108162] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7> [287.108465] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7> [287.108696] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no <7> [287.108890] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no <7> [287.109215] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7> [287.109539] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7> [287.109860] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes <7> [287.110184] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7> [287.110500] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no <7> [287.110818] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7> [287.111150] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7> [287.111460] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no <7> [287.111657] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no <7> [287.111865] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no <7> [287.112163] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7> [287.112480] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no <7> [287.112797] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7> [287.113134] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7> [287.113456] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7> [287.113774] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7> [287.114102] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no <7> [287.114405] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes <7> [287.114601] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7> [287.114808] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7> [287.115109] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7> [287.115431] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7> [287.115752] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7> [287.116089] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403 <7> [287.116412] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001 <7> [287.116726] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3 <7> [287.117056] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007 <7> [287.117367] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000 <7> [287.117613] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000 <7> [287.117821] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24 <7> [287.118084] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8 <7> [287.118395] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7> [287.118716] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7> [287.119050] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes <6> [287.119373] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [287.119377] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [287.119382] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [287.119433] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [287.119848] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [287.120457] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [287.120851] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [287.120861] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [287.121180] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [287.124621] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [287.124633] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [287.125168] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [287.125185] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [287.125197] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [287.129678] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [287.129701] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [287.129714] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [287.132200] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [287.132567] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [287.133118] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [287.133444] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [287.133456] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [287.133792] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [287.137238] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [287.137254] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [287.137654] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [287.137670] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? yes <7> [287.137680] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no <7> [287.137688] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no <7> [287.137697] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no <7> [287.137705] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no <7> [287.138575] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [287.138626] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] found preferred mode: 3200x1800 <7> [287.138637] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [287.138717] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:57:pipe A] desired mode 3200x1800 set (0,0) <7> [287.139718] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:109:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [287.140056] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:108:DDI A/PHY A][CRTC:57:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [287.140340] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000 <7> [287.140705] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [287.141095] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:108:DDI A/PHY A] [CRTC:57:pipe A] <7> [287.141453] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [287.141812] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [287.142171] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [287.142520] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [287.142771] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [287.143070] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [287.143436] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [287.143801] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [287.144176] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [287.144536] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [287.144887] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <6> [287.145047] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7> [287.145177] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [287.145427] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [287.145753] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [287.146151] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [287.146521] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [287.146888] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [287.147285] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [287.147637] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [287.148022] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [287.148277] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [287.148563] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [287.148949] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [287.149317] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [287.149681] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [287.150062] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [287.150414] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [287.150691] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [287.150953] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [287.151300] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [287.151667] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [287.152069] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [287.152435] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [287.152796] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [287.153178] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [287.153531] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dpll_hw_state <7> [287.153883] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [287.154275] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 <7> [287.154641] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [287.155022] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [287.155380] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [287.155735] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [287.156097] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [287.156349] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [287.156595] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset <7> [287.157722] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [287.158122] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [287.158470] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [287.158750] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [287.159053] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [287.159402] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [287.159761] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [287.160341] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [287.160759] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [287.161185] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [287.161533] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [287.161886] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [287.162267] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:57:pipe A] allocated DPLL 0 <7> [287.162629] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:57:pipe A] reserving DPLL 0 <7> [287.163003] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: yes [modeset] <7> [287.163352] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [287.163699] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [287.164062] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [287.164426] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [287.164788] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [287.165172] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [287.165529] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [287.165877] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [287.166242] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [287.166601] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [287.166967] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [287.167335] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [287.167672] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [287.168025] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [287.168360] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [287.168700] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [287.169063] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [287.169433] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [287.169795] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [287.170161] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [287.170524] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [287.170860] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [287.171220] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [287.171563] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [287.171904] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [287.172256] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [287.172590] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [287.172838] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [287.173184] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [287.173563] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [287.173937] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [287.174309] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [287.174657] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [287.175006] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [287.175341] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [287.175578] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [287.175813] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [287.176141] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [287.176491] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [287.176844] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [287.177202] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [287.177548] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [287.177882] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [287.178167] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:110] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [287.178404] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [287.178689] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [287.179054] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [287.179407] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [287.181109] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [287.182341] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A] <7> [287.182715] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B] <7> [287.183074] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A] <7> [287.183381] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B] <7> [287.183625] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C] <7> [287.183901] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C] <7> [287.184273] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A] <7> [287.184634] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B] <7> [287.185005] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C] <7> [287.186039] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:57:pipe A] <7> [287.186428] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [287.187260] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power on <7> [287.187757] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [287.188163] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [287.198947] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [287.199340] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power on <7> [287.199731] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000000b <7> [287.403397] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [287.404155] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [287.405219] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [287.408228] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [287.409010] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [287.410613] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [287.411147] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [287.411634] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [287.414012] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Clock recovery OK <7> [287.414638] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [287.415321] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [287.417731] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [287.418490] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [287.419345] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [287.422220] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [287.423166] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [287.425271] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [287.427733] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [287.429034] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [287.431012] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 37 <7> [287.435249] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 375 us, max time under evasion is 250 us <7> [287.444661] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [287.453458] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1] <7> [287.455577] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [287.459380] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <6> [287.467471] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7> [287.468774] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [287.469085] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [287.469121] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [287.469575] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [287.469257] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [287.469627] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [287.472606] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [287.473535] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [287.475044] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [287.476736] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [287.478461] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [287.478506] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [287.478540] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [287.478679] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no <7> [287.480398] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [287.481906] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [287.489293] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes: <7> [287.489351] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [287.489398] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [287.489447] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [287.489490] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [287.491181] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [287.495474] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [287.495540] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [287.495585] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [287.501186] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [287.502784] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [287.507039] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [287.508775] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [287.508820] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [287.513994] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [287.521383] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [287.521446] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [287.524113] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [287.524176] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [287.524223] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [287.531079] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [287.531119] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [287.531148] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [287.532987] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [287.533967] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [287.535524] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [287.536574] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [287.536601] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [287.538008] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [287.542695] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [287.542720] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [287.543908] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [287.544162] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? yes <7> [287.544183] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no <7> [287.544199] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no <7> [287.544215] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no <7> [287.544230] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no <7> [287.544332] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [287.544387] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] found preferred mode: 3200x1800 <7> [287.544404] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [287.545804] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:57:pipe A] desired mode 3200x1800 set (0,0) <7> [287.547081] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [287.548462] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [287.548518] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [287.549604] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [287.550215] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [287.550722] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [287.552394] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [287.552726] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [287.552742] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [287.553187] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no <7> [287.553630] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [287.554046] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [287.557841] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes: <7> [287.557859] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [287.557873] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [287.558107] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [287.558121] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [287.562717] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [287.562881] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [287.562901] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [287.564142] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [287.564357] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [287.564610] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [287.564839] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [287.565286] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [287.565679] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [287.565853] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [287.566388] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [287.566400] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [287.566451] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [287.566778] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [287.566799] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [287.567371] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [287.567759] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [287.568311] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [287.570117] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [287.570130] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [287.570568] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [287.570713] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [287.570723] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [287.575261] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [287.575392] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [287.575403] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [287.576086] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [287.576460] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [287.577120] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [287.577509] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [287.577519] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [287.577875] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [287.581275] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [287.581289] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [287.581725] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [287.589396] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [287.589416] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [287.593976] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <6> [287.594068] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input40 <7> [287.594990] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [287.595003] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [287.595667] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [287.596046] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [287.596609] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [287.597172] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <6> [287.597290] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input41 <7> [287.597184] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [287.597566] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [287.601995] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [287.602009] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [287.602445] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [287.603481] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [287.603494] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [287.608034] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [287.609011] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [287.609025] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [287.610445] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [287.610824] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [287.611604] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [287.612108] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [287.612119] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [287.612486] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [287.615799] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [287.615810] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [287.616273] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [287.617079] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [287.617092] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [287.617552] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [287.617922] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [287.618326] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [287.618739] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [287.618749] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [287.618757] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [287.618797] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no <7> [287.619178] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [287.619552] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <6> [287.619847] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input42 <7> [287.620917] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes: <7> [287.620930] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [287.620973] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [287.621020] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [287.621031] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [287.625575] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [287.625630] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [287.625640] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [287.626402] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [287.626774] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [287.627616] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [287.628050] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [287.628061] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [287.628412] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [287.631846] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [287.631862] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [287.632863] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [287.632916] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [287.632927] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [287.637850] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [287.637902] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [287.637913] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [287.638610] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [287.639014] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [287.639584] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [287.640005] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [287.640016] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [287.640382] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [287.643811] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [287.643823] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [287.644259] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [287.646045] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:142] <7> [288.698798] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:57:pipe A] <7> [288.699431] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [288.700555] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [288.701086] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [288.701390] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [288.701641] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [288.701890] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [288.702173] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [288.702490] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [288.702740] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [288.703013] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [288.703292] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [288.703531] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [288.703769] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [288.704050] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [288.704308] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [288.704547] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [288.704787] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [288.705046] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [288.705308] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [288.705547] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [288.705784] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [288.706042] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [288.706302] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [288.706541] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [288.706796] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [288.707146] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [288.707432] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [288.707687] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [288.708011] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [288.708287] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [288.708537] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [288.708836] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [288.709110] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [288.709387] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [288.709632] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [288.709879] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [288.710147] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [288.710418] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [288.710660] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [288.710900] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset <7> [288.711164] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0 <7> [288.711468] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [288.711725] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [288.711958] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [288.712208] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [288.712558] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [288.712835] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [288.713090] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [288.713411] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [288.713679] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz <7> [288.713950] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [288.714218] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [288.714475] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [288.714731] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset] <7> [288.715012] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [288.715285] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [288.715525] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [288.715937] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [288.717404] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [288.771645] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [288.922348] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0 <7> [288.924248] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [288.930306] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off <7> [288.931152] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [288.932003] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short <7> [288.933699] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time <7> [288.934953] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [288.986302] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [288.987409] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long <7> [288.988410] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [288.990126] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [288.992056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [288.994051] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [288.994460] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A] <7> [288.996450] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [288.996584] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [288.997921] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [289.000633] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A] <7> [289.001727] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B] <7> [289.002712] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A] <7> [289.003930] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B] <7> [289.004913] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C] <7> [289.006121] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C] <7> [289.007413] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A] <7> [289.008611] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B] <7> [289.009649] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C] <7> [289.010782] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1] <7> [289.012775] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [289.015835] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:82:pipe B] <7> [289.017166] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:107:pipe C] <7> [289.114754] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [289.116567] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [289.117804] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [289.119337] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [289.121708] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [289.141090] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [289.233853] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:109:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [289.234973] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:108:DDI A/PHY A][CRTC:57:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [289.235963] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000 <7> [289.237656] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [289.239286] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:108:DDI A/PHY A] [CRTC:57:pipe A] <7> [289.240828] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [289.242412] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [289.244361] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [289.246194] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [289.247838] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [289.249460] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [289.250926] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [289.252568] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [289.254265] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [289.255719] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [289.257268] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [289.258812] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [289.260365] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [289.261727] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [289.263248] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [289.264833] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [289.266246] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [289.267752] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [289.269105] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [289.270462] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [289.271807] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [289.273169] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [289.274682] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [289.276079] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [289.277437] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [289.278804] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [289.280184] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [289.281545] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [289.282897] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [289.284275] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [289.285629] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [289.286998] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [289.288342] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [289.289722] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [289.291073] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [289.292427] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [289.293785] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [289.295163] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [289.296523] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [289.297894] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset <7> [289.299481] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [289.300764] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [289.302079] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [289.303376] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [289.304661] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [289.305973] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [289.307125] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [289.308235] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [289.309709] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [289.311082] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [289.312395] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [289.313714] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [289.315049] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:57:pipe A] allocated DPLL 0 <7> [289.316306] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:57:pipe A] reserving DPLL 0 <7> [289.317377] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: yes [modeset] <7> [289.318475] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [289.319361] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [289.320443] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [289.321366] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [289.322455] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [289.323322] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [289.324366] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [289.325547] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [289.326641] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [289.327514] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [289.328586] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [289.329502] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [289.330559] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [289.331470] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [289.332529] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [289.333614] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [289.334654] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [289.335536] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [289.336438] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [289.337447] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [289.338490] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [289.339358] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [289.340422] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [289.341308] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [289.342483] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [289.343383] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [289.344608] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [289.345957] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [289.347329] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [289.348549] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [289.349424] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [289.350002] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [289.350654] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [289.351532] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [289.352433] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [289.353305] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [289.354218] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [289.354980] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [289.355572] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [289.356403] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [289.357310] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [289.357940] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [289.358599] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [289.359258] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:110] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [289.359881] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [289.360471] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [289.360994] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [289.361465] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [289.374127] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [289.383904] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [289.384388] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [289.385292] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [289.386201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [289.387080] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [289.388196] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A] <7> [289.388655] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B] <7> [289.389115] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A] <7> [289.389550] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B] <7> [289.389979] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C] <7> [289.390436] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C] <7> [289.390872] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A] <7> [289.391333] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B] <7> [289.391767] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C] <7> [289.392527] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:57:pipe A] <7> [289.392988] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [289.393754] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power on <7> [289.394357] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (98 ms remaining) <7> [289.498465] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [289.508157] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [289.508553] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power on <7> [289.508933] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003 <7> [289.558414] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [289.559520] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long <7> [289.560528] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [289.561608] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [289.713295] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [289.714600] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [289.715900] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [289.719363] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on <7> [289.721002] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b <7> [289.728647] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [289.729902] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [289.733570] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [289.735155] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [289.736706] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [289.740719] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Clock recovery OK <7> [289.742337] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [289.743713] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [289.751525] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [289.752582] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [289.753789] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [289.758567] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [289.760095] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [289.762860] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [289.765749] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [289.766756] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [289.768394] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 37 <7> [289.772458] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 388 us, max time under evasion is 250 us <7> [289.781653] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [289.786733] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1] <7> [289.787904] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [289.793134] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [289.795956] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [289.803591] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [289.805005] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [289.805978] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [289.807150] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [289.808152] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [289.808180] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [289.809917] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [289.815293] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [289.815336] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [289.819871] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [289.828328] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [289.829974] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [289.831273] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [289.832742] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [289.834115] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [289.834150] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [289.835295] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [289.840173] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [289.840202] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [289.937617] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [289.938437] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [289.951248] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [289.976745] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [289.977109] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [289.989202] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [290.045345] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [290.049532] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [290.058054] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [290.058522] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [290.058845] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [290.059211] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [290.059644] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [290.059966] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [290.060334] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [290.060738] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [290.061110] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [290.062177] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [290.151671] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [290.152804] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [290.153324] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [290.153963] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <6> [290.159491] Console: switching to colour dummy device 80x25 <7> [290.161378] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:110] is removed <7> [290.161644] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [290.162683] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [290.163727] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [290.164680] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [290.165632] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [290.167104] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [290.181981] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [290.185603] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [290.186486] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [290.187228] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [290.188267] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [290.189395] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [290.190520] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [290.191480] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [290.192486] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [290.193456] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [290.194438] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [290.195417] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [290.196447] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [290.197506] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [290.198549] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [290.199549] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [290.200533] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [290.201508] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [290.202485] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [290.203446] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [290.204451] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [290.205418] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [290.206389] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [290.207361] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [290.208333] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [290.209311] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [290.210285] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [290.211256] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [290.212235] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [290.213207] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [290.214192] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [290.215163] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [290.216141] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [290.217103] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [290.218082] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [290.218996] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [290.219989] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [290.220972] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [290.221943] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [290.222917] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [290.223923] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset <7> [290.224890] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0 <7> [290.226239] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [290.227834] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [290.228702] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [290.229565] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [290.230514] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [290.231477] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [290.232439] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset] <7> [290.233383] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [290.234070] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [290.234687] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [290.236801] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [290.442452] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0 <7> [290.444123] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [290.451689] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off <7> [290.452202] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [290.452942] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time <7> [290.453419] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short <7> [290.454168] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [290.505416] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [290.505675] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [290.506577] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long <7> [290.507746] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [290.508287] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A] <7> [290.509222] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [290.510367] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [290.510587] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [290.512443] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [290.516305] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A] <7> [290.518373] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B] <7> [290.520181] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A] <7> [290.521834] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B] <7> [290.523456] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C] <7> [290.525163] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C] <7> [290.526958] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A] <7> [290.528760] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B] <7> [290.530528] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C] <7> [290.532197] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1] <7> [290.535330] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [290.609058] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [290.655270] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:109:eDP-1] removing connector from sysfs <7> [290.683385] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:117:DP-1] removing connector from sysfs <7> [290.690942] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:126:HDMI-A-1] removing connector from sysfs <7> [290.703000] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:132:DP-2] removing connector from sysfs <7> [290.708637] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:138:HDMI-A-2] removing connector from sysfs <7> [290.735487] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (272 ms remaining) <7> [291.010688] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [291.021305] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [291.632393] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS <6> [291.633816] [IGT] i915_pm_rpm: exiting, ret=0

<6> [276.583348] Console: switching to colour dummy device 80x25

<7> [276.587974] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [276.588840] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [276.588853] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [276.589435] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [276.589794] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [276.590031] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [276.590303] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [276.590312] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [276.590319] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [276.590354] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no

<7> [276.590630] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [276.590942] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [276.592886] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:

<7> [276.592899] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [276.592910] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [276.593009] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [276.593017] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [276.597387] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [276.597481] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [276.597489] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [276.598239] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [276.598513] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [276.599043] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [276.599440] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [276.599450] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [276.599764] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [276.602827] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [276.602836] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [276.603087] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [276.603194] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [276.603202] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [276.607569] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [276.607655] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [276.607663] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [276.608164] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [276.608413] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [276.608907] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [276.609153] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [276.609160] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [276.609374] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [276.612441] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [276.612449] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [276.612711] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [276.619421] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [276.619433] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [276.623779] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [276.624475] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [276.624488] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [276.625028] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [276.625263] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [276.625715] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [276.625999] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [276.626006] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [276.626220] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [276.629301] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [276.629320] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [276.629618] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [276.630267] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [276.630275] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [276.634651] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [276.635633] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [276.635646] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [276.636284] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [276.636645] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [276.637159] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [276.637545] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [276.637555] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [276.637898] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [276.641869] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [276.641881] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [276.642302] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [276.643133] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [276.643145] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [276.643607] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [276.643976] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [276.644341] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [276.644766] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [276.644776] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [276.644784] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [276.644819] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no

<7> [276.645199] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [276.645577] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [276.646943] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:

<7> [276.646959] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [276.646971] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [276.647016] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [276.647026] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [276.651542] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [276.651587] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [276.651598] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [276.652224] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [276.652628] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [276.653183] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [276.653580] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [276.653590] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [276.653924] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [276.657140] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [276.657151] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [276.657566] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [276.657609] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [276.657619] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [276.662076] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [276.662117] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [276.662127] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [276.662778] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [276.663130] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [276.663706] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [276.664088] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [276.664097] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [276.664476] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [276.667710] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [276.667720] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [276.668123] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [276.668889] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:143]

<7> [276.907587] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [277.723754] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:57:pipe A]

<7> [277.724263] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [277.725461] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [277.726240] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [277.726675] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [277.727095] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [277.727535] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [277.727961] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [277.728361] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [277.728776] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [277.729180] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [277.729584] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [277.729967] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [277.730350] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [277.730766] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [277.731153] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [277.731551] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [277.731940] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [277.732325] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [277.732738] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [277.733131] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [277.733533] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [277.733917] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [277.734302] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [277.734702] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [277.735106] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [277.735511] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [277.735897] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [277.736281] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [277.736680] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [277.736990] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [277.737231] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [277.737493] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [277.737772] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [277.738012] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [277.738251] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [277.738510] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [277.738796] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [277.739038] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [277.739280] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [277.739541] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset

<7> [277.739839] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0

<7> [277.740139] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [277.740395] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [277.740654] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [277.740927] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [277.741159] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [277.741393] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [277.741720] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [277.742109] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [277.742414] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz

<7> [277.742744] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [277.743030] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [277.743271] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [277.743534] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset]

<7> [277.743839] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [277.744081] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [277.744319] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [277.744791] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [277.746307] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [277.953694] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0

<7> [277.955593] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [277.970805] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off

<7> [277.971323] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [277.972087] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [277.972681] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short

<7> [277.973493] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [278.025296] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [278.025259] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [278.026658] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long

<7> [278.027243] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [278.027920] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [278.031112] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [278.031489] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A]

<7> [278.032464] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [278.033393] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [278.034588] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [278.037354] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A]

<7> [278.038398] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B]

<7> [278.039311] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A]

<7> [278.040376] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B]

<7> [278.041239] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C]

<7> [278.042271] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C]

<7> [278.043190] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A]

<7> [278.044243] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B]

<7> [278.045100] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C]

<7> [278.046275] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1]

<7> [278.048522] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [278.052105] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:82:pipe B]

<7> [278.053493] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:107:pipe C]

<7> [278.153928] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [278.155726] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [278.157011] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [278.158551] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [278.161773] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [278.185847] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [278.265366] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:109:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [278.266545] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:108:DDI A/PHY A][CRTC:57:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [278.268098] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000

<7> [278.269693] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [278.272176] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:108:DDI A/PHY A] [CRTC:57:pipe A]

<7> [278.273995] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [278.275585] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [278.277176] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [278.278872] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [278.280513] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [278.282088] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [278.283678] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [278.285278] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [278.286822] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [278.288371] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [278.289942] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [278.291528] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [278.292955] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [278.294411] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [278.295836] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [278.297270] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [278.298732] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [278.300088] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [278.301483] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [278.302832] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [278.304199] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [278.305550] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [278.306914] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [278.308260] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [278.309618] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [278.310973] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [278.312334] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [278.313687] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [278.315038] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [278.316392] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [278.317755] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [278.319117] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [278.320508] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [278.321855] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [278.323217] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [278.324568] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [278.325962] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [278.327342] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [278.328696] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [278.329962] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset

<7> [278.331015] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [278.331907] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [278.332787] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [278.333666] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [278.334552] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [278.335419] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [278.336301] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [278.337376] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [278.338378] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [278.339157] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [278.339832] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [278.340503] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [278.341152] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:57:pipe A] allocated DPLL 0

<7> [278.341834] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:57:pipe A] reserving DPLL 0

<7> [278.342514] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: yes [modeset]

<7> [278.343167] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [278.343862] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [278.344530] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [278.345153] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [278.345858] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [278.346528] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [278.347179] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [278.347856] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [278.348376] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [278.348914] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [278.349432] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [278.349975] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [278.350511] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [278.351032] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [278.351575] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [278.352095] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [278.352630] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [278.353147] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [278.353685] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [278.354202] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [278.354747] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [278.355266] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [278.355803] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [278.356323] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [278.356863] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [278.357298] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [278.357755] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [278.358192] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [278.358655] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [278.359025] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [278.359474] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [278.359903] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [278.360337] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [278.360792] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [278.361224] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [278.361690] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [278.362123] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [278.362580] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [278.363019] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [278.363476] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [278.363906] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [278.364339] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [278.364792] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [278.365224] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:110] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [278.365678] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [278.366074] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [278.366449] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [278.366832] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [278.378522] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [278.388539] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [278.388772] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [278.389156] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [278.389749] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [278.390442] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [278.391302] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A]

<7> [278.391623] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B]

<7> [278.391836] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A]

<7> [278.392043] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B]

<7> [278.392249] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C]

<7> [278.392577] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C]

<7> [278.392904] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A]

<7> [278.393229] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B]

<7> [278.393569] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C]

<7> [278.394117] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:57:pipe A]

<7> [278.394355] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [278.394779] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power on

<7> [278.395148] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (132 ms remaining)

<7> [278.529935] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [278.580700] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [278.581877] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power on

<7> [278.582947] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003

<7> [278.632252] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [278.633236] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long

<7> [278.634122] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [278.636679] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [278.782601] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [278.783900] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [278.786805] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [278.790148] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on

<7> [278.792050] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b

<7> [278.798072] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [278.799295] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [278.803607] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [278.805458] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [278.806975] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [278.810817] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Clock recovery OK

<7> [278.812187] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [278.813346] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [278.816585] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [278.817540] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [278.818560] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [278.821681] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [278.822893] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [278.824051] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [278.827300] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [278.828279] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [278.830476] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [278.833235] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [278.834276] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [278.836111] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 37

<7> [278.849070] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [278.856060] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1]

<7> [278.857267] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [278.862181] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [278.863083] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [278.868269] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [278.870812] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<6> [278.872610] [IGT] i915_pm_rpm: starting subtest module-reload

<7> [278.872282] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [278.874128] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [278.875783] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [278.875827] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [278.877406] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [278.884303] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [278.884355] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [278.886188] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [278.892068] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [278.894121] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [278.895667] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [278.898079] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [278.899861] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [278.899904] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [278.901551] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [278.907592] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [278.907622] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [279.014203] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [279.014948] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [279.027687] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [279.053270] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [279.053733] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [279.066655] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [279.112355] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [279.117118] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [279.132422] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [279.133097] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [279.136604] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [279.137230] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [279.138048] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [279.138870] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [279.139576] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [279.140214] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [279.140851] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [279.142397] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [279.248572] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [279.249434] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [279.249823] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [279.250363] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [279.252774] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:110] is removed

<7> [279.253126] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [279.253742] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [279.254265] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [279.255181] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [279.255767] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [279.256713] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [279.265917] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [279.268028] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [279.268642] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [279.269189] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [279.269818] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [279.270362] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [279.270967] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [279.271563] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [279.272002] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [279.272475] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [279.273037] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [279.273478] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [279.274062] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [279.274475] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [279.274992] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [279.275406] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [279.275896] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [279.276322] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [279.276807] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [279.277241] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [279.277810] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [279.278316] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [279.278810] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [279.279312] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [279.279801] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [279.280296] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [279.280772] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [279.281290] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [279.281764] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [279.282324] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [279.282940] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [279.283414] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [279.284010] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [279.284461] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [279.284943] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [279.285368] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [279.285842] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [279.286265] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [279.286809] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [279.287218] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [279.287869] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset

<7> [279.288350] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0

<7> [279.289012] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [279.289481] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [279.290083] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [279.290494] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [279.290926] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [279.291423] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [279.291879] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset]

<7> [279.292396] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [279.292888] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [279.293395] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [279.294862] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [279.497989] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0

<7> [279.500356] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [279.519233] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off

<7> [279.519756] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [279.520232] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [279.520820] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short

<7> [279.521324] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [279.573267] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [279.573463] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [279.574430] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long

<7> [279.575444] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [279.576241] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [279.576895] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A]

<7> [279.577989] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [279.579210] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [279.580610] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [279.583731] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A]

<7> [279.585136] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B]

<7> [279.586323] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A]

<7> [279.587972] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B]

<7> [279.589155] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C]

<7> [279.590583] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C]

<7> [279.591815] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A]

<7> [279.593259] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B]

<7> [279.594371] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C]

<7> [279.595819] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1]

<7> [279.598453] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [279.665447] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [279.713595] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:109:eDP-1] removing connector from sysfs

<7> [279.732410] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:117:DP-1] removing connector from sysfs

<7> [279.741195] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:126:HDMI-A-1] removing connector from sysfs

<7> [279.759238] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:132:DP-2] removing connector from sysfs

<7> [279.764001] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:138:HDMI-A-2] removing connector from sysfs

<7> [279.795743] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (279 ms remaining)

<7> [280.081875] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [280.092745] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<5> [281.526272] Setting dangerous option force_probe - tainting kernel

<6> [281.539171] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0

<7> [281.541046] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K

<7> [281.541459] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [281.541746] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH

<7> [281.542115] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [281.542570] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [281.543171] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [281.543516] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [281.544615] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [281.544972] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [281.545291] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [281.545609] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [281.545622] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [281.546414] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [281.546452] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [281.546754] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [281.547100] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7716 MiB [mem 0x00000000-0x1e24e6fff], io: n/a

<7> [281.547411] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a

<7> [281.548374] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018

<7> [281.548832] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [281.549083] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [281.549330] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [281.549624] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [281.558702] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [281.558983] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [281.559231] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [281.559500] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [281.559799] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [281.560208] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [281.560615] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no

<7> [281.561024] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [281.561429] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [281.561785] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no

<7> [281.562108] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes

<7> [281.562467] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no

<7> [281.562760] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3

<7> [281.563053] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [281.563311] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0

<7> [281.563566] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0

<7> [281.564535] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [281.564852] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203

<7> [281.565178] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [281.565453] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [281.565748] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [281.566078] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [281.566345] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 848)

<7> [281.566605] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [281.566889] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [281.567203] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [281.567463] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [281.567743] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136)

<7> [281.568100] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [281.568367] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [281.568633] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [281.568921] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [281.569234] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [281.569493] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [281.569760] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [281.570071] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [281.570321] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [281.570571] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [281.570939] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [281.571215] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [281.571496] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [281.571806] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [281.572193] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [281.572471] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [281.572755] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [281.573069] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [281.573322] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [281.573634] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [281.574037] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [281.574306] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [281.574563] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [281.574858] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [281.575238] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [281.575498] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [281.575771] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [281.576092] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [281.577131] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<7> [281.578518] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [281.578880] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [281.579261] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [281.579673] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<6> [281.580890] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [281.581103] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [281.581709] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [281.582047] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [281.582301] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided

<7> [281.582550] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec)

<7> [281.582828] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec)

<7> [281.583134] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec)

<7> [281.583382] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec)

<7> [281.583734] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec)

<7> [281.584109] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec)

<7> [281.584506] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec)

<7> [281.584904] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec)

<7> [281.585288] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec)

<7> [281.585649] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec)

<7> [281.585964] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec)

<7> [281.586221] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec)

<7> [281.586603] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec)

<7> [281.587056] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec)

<7> [281.587432] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec)

<7> [281.591554] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available.

<7> [281.595435] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [281.595903] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI A/PHY A] Using AUX CH A (VBT)

<7> [281.596355] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:108:DDI A/PHY A]

<7> [281.604916] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [281.605341] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [281.605764] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [281.606135] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [281.607352] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [281.607750] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [281.608121] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP

<7> [281.608491] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [281.608890] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0

<7> [281.609204] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0

<7> [281.609914] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:108:DDI A/PHY A] initial power sequencer: PPS 0

<7> [281.610328] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [281.610704] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [281.611064] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [281.611419] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [281.611792] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [281.612195] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [281.615456] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on

<7> [281.615911] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [281.616318] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [281.627818] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [281.628125] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [281.628379] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [281.835683] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [281.836539] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [281.838849] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00

<7> [281.844385] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [281.865404] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [281.865449] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [281.865476] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [281.866042] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [281.867709] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [281.869114] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:109:eDP-1] DRRS type: static

<7> [281.871075] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:109:eDP-1] Using native PCH PWM for backlight control

<7> [281.872718] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:109:eDP-1] backlight initialized, disabled, brightness 0/937

<7> [281.875024] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [281.876728] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [281.878037] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [281.879559] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [281.880885] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [281.882471] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [281.885368] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:116:DDI B/PHY B] Using AUX CH B (VBT)

<7> [281.887208] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:116:DDI B/PHY B]

<7> [281.891859] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [281.893324] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:116:DDI B/PHY B]

<7> [281.894623] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:116:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [281.898330] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:131:DDI C/PHY C] Using AUX CH C (VBT)

<7> [281.899920] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:131:DDI C/PHY C]

<7> [281.903704] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [281.905174] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:131:DDI C/PHY C]

<7> [281.906437] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:131:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [281.911348] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] hw state readout: disabled

<7> [281.913436] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] hw state readout: disabled

<7> [281.915577] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] hw state readout: disabled

<7> [281.917142] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A

<7> [281.918881] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] hw state readout: disabled, pipe A

<7> [281.920394] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] hw state readout: disabled, pipe A

<7> [281.922631] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] hw state readout: disabled, pipe B

<7> [281.924258] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] hw state readout: disabled, pipe B

<7> [281.925869] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] hw state readout: disabled, pipe B

<7> [281.927596] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] hw state readout: disabled, pipe C

<7> [281.929208] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] hw state readout: disabled, pipe C

<7> [281.930932] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] hw state readout: disabled, pipe C

<7> [281.932742] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [281.934498] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:116:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [281.935991] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DP-MST A] hw state readout: disabled, pipe A

<7> [281.937577] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST B] hw state readout: disabled, pipe B

<7> [281.939032] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST C] hw state readout: disabled, pipe C

<7> [281.941144] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:131:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [281.942599] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DP-MST A] hw state readout: disabled, pipe A

<7> [281.944398] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST B] hw state readout: disabled, pipe B

<7> [281.946053] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST C] hw state readout: disabled, pipe C

<7> [281.947632] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [281.948946] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [281.949919] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [281.950933] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [281.952145] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:eDP-1] hw state readout: disabled

<7> [281.953398] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:117:DP-1] hw state readout: disabled

<7> [281.954521] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:126:HDMI-A-1] hw state readout: disabled

<7> [281.955565] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:132:DP-2] hw state readout: disabled

<7> [281.956609] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:138:HDMI-A-2] hw state readout: disabled

<7> [281.957475] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz

<7> [281.958062] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] min_cdclk 0 kHz

<7> [281.958809] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] min_cdclk 0 kHz

<7> [281.959439] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] min_cdclk 0 kHz

<7> [281.960081] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] min_cdclk 0 kHz

<7> [281.960772] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] min_cdclk 0 kHz

<7> [281.961319] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] min_cdclk 0 kHz

<7> [281.961939] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] min_cdclk 0 kHz

<7> [281.962604] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] min_cdclk 0 kHz

<7> [281.963216] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] min_cdclk 0 kHz

<7> [281.964005] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] min_cdclk 0 kHz

<7> [281.964594] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] min_cdclk 0 kHz

<7> [281.965189] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:57:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [281.965865] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:82:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [281.966388] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:107:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [281.967207] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [setup_hw_state]

<7> [281.967642] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [setup_hw_state]

<7> [281.968107] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [setup_hw_state]

<7> [281.968697] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [281.969291] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [281.969686] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [281.970141] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [281.970555] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global

<7> [281.973924] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [281.974356] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [281.974805] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0

<7> [281.998593] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [281.998883] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [281.999082] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [281.999279] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [281.999478] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 0: start 0x8

<7> [281.999764] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 1: start 0x108

<7> [282.000147] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 2: start 0x208

<7> [282.000532] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 3: start 0x308

<7> [282.000947] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 4: start 0x3c8

<7> [282.001329] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 0: start 0x8

<7> [282.001631] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 1: start 0x108

<7> [282.001956] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 2: start 0x208

<7> [282.002314] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 3: start 0x308

<7> [282.002762] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 4: start 0x3c8

<7> [282.003150] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 0: start 0x8

<7> [282.003536] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 1: start 0x108

<7> [282.003941] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 2: start 0x208

<7> [282.004317] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 3: start 0x308

<7> [282.004675] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 4: start 0x3c8

<7> [282.005204] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [fastset]

<7> [282.005464] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [fastset]

<7> [282.005752] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [fastset]

<7> [282.006245] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [282.006919] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:82:pipe B]

<7> [282.007343] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:107:pipe C]

<7> [282.007819] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [282.013901] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:109:eDP-1] adding connector to sysfs

<7> [282.019276] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:109:eDP-1] backlight device intel_backlight registered

<7> [282.019788] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:109:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [282.020990] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [282.023639] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:eDP-1] generating connector hotplug event

<7> [282.023963] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:117:DP-1] adding connector to sysfs

<7> [282.026453] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [282.029302] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:117:DP-1] generating connector hotplug event

<7> [282.029456] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:126:HDMI-A-1] adding connector to sysfs

<7> [282.030626] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:126:HDMI-A-1] generating connector hotplug event

<7> [282.030783] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:132:DP-2] adding connector to sysfs

<7> [282.031885] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [282.035836] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:132:DP-2] generating connector hotplug event

<7> [282.035950] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:138:HDMI-A-2] adding connector to sysfs

<7> [282.037026] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:138:HDMI-A-2] generating connector hotplug event

<6> [282.037163] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0

<7> [282.042995] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [282.075604] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [282.085878] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input35

<7> [282.087313] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [282.092078] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [282.092537] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:117:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [282.093759] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [282.094168] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:126:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [282.094584] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [282.095030] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:132:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [282.095446] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [282.095872] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:138:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [282.096279] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [282.096877] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:57:pipe A] not active, skipping

<7> [282.097299] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:82:pipe B] not active, skipping

<7> [282.097714] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:107:pipe C] not active, skipping

<7> [282.098098] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config

<7> [282.100043] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [282.101070] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [282.101230] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [282.101245] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [282.101656] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] status updated from unknown to disconnected

<7> [282.101713] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] disconnected

<7> [282.101734] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [282.101992] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:109:eDP-1] EDID changed, epoch counter 2

<7> [282.102021] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [282.102033] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [282.102431] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [282.102444] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [282.102455] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [282.102852] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [282.102865] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [282.102876] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [282.103260] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [282.103273] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [282.103284] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [282.103687] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [282.103703] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [282.103712] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? no

<7> [282.103721] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no

<7> [282.103729] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no

<7> [282.103737] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no

<7> [282.103745] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no

<7> [282.103804] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [282.103824] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [282.103932] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [282.103947] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [282.106684] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9

<7> [282.107134] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0

<7> [282.107544] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no

<7> [282.107990] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no

<7> [282.108396] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no

<7> [282.108855] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes

<7> [282.109269] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes

<7> [282.109699] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no

<7> [282.110112] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes

<7> [282.110525] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no

<7> [282.110955] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes

<7> [282.111369] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no

<7> [282.111822] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes

<7> [282.112231] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no

<7> [282.112640] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes

<7> [282.113091] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes

<7> [282.113500] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no

<7> [282.113950] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no

<7> [282.114363] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes

<7> [282.114814] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes

<7> [282.115225] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no

<7> [282.115634] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz

<7> [282.116270] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [282.116412] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [282.116427] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [282.116850] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] disconnected

<7> [282.116866] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [282.116877] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [282.117269] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [282.117282] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [282.117293] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [282.117704] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [282.117717] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [282.117728] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [282.118115] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [282.118128] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [282.118140] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [282.118531] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [282.118543] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [282.118551] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? no

<7> [282.118560] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no

<7> [282.118569] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no

<7> [282.118578] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no

<7> [282.118586] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no

<7> [282.118650] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [282.118690] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [282.118788] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [282.119210] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [282.119324] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [282.120437] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device

<7> [282.120898] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [282.121328] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [282.121775] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [282.122200] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [282.122619] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [282.123402] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9

<7> [282.123755] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9

<7> [282.124076] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9

<7> [282.124396] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0

<7> [282.124734] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0

<7> [282.125050] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2

<7> [282.125359] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21

<7> [282.125617] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000

<7> [282.125907] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE

<7> [282.126171] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48

<7> [282.126425] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2

<7> [282.126761] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39

<7> [282.127079] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no

<7> [282.127401] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no

<7> [282.127740] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no

<7> [282.128059] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes

<7> [282.128380] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no

<7> [282.128715] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no

<7> [282.129033] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes

<7> [282.129361] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes

<7> [282.129803] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no

<7> [282.130123] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no

<7> [282.130430] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no

<7> [282.130763] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes

<7> [282.131081] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no

<7> [282.131397] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no

<7> [282.131745] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no

<7> [282.132071] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no

<7> [282.132397] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no

<7> [282.132741] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no

<7> [282.133060] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes

<7> [282.133372] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes

<7> [282.133709] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no

<7> [282.134022] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no

<7> [282.134336] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no

<7> [282.134656] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no

<7> [282.135000] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no

<7> [282.135322] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no

<7> [282.135640] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no

<7> [282.135975] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no

<7> [282.136292] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes

<7> [282.136610] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no

<7> [282.136940] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes

<7> [282.137257] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes

<7> [282.137574] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no

<7> [282.137910] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes

<7> [282.138228] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no

<7> [282.138546] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no

<7> [282.138874] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no

<7> [282.139190] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no

<7> [282.139505] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled

<7> [282.139840] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403

<7> [282.140163] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001

<7> [282.140485] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3

<7> [282.140826] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007

<7> [282.141149] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000

<7> [282.141473] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000

<7> [282.141801] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24

<7> [282.142116] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8

<7> [282.142433] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no

<7> [282.142765] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no

<7> [282.143082] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes

<6> [282.143398] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [282.143402] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [282.143406] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [282.158954] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4

<6> [282.160942] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])

<7> [282.161505] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [282.162328] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [282.164500] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [282.196513] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [282.196965] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [282.197339] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [282.197733] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [282.198088] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [282.198444] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [282.198818] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [282.199163] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [282.199504] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<6> [282.221713] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36

<6> [282.234349] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input37

<6> [282.237479] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input38

<7> [283.444263] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [284.420625] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD off

<7> [284.420985] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [284.421245] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [284.421618] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [284.421910] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [284.422837] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [284.423295] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [284.423840] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [284.423825] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long

<7> [284.424895] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [284.426122] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [284.433815] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [284.594139] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [284.618977] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [284.627030] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [284.627406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [284.627699] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [284.627978] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [284.628257] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [284.628503] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [284.628743] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [284.629111] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [284.629432] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [284.630225] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [284.630877] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [284.631857] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [284.643970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [284.644308] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [284.644580] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [284.644902] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [284.645631] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [284.758809] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [284.759188] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [284.760018] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [284.760626] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [284.763235] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [284.770266] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [284.770529] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [284.770745] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [284.771109] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [284.771477] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [284.771852] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [284.772203] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [284.772556] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [284.773265] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [284.774216] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [284.775066] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [284.775444] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [284.775813] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [284.776563] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [284.864499] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [284.865443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [284.867022] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [284.868684] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [284.870671] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [284.872043] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [284.873400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [284.874758] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [284.876344] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [284.936099] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [284.950553] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:109:eDP-1] removing connector from sysfs

<7> [284.961326] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:117:DP-1] removing connector from sysfs

<7> [284.964510] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:126:HDMI-A-1] removing connector from sysfs

<7> [284.973648] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:132:DP-2] removing connector from sysfs

<7> [284.974578] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:138:HDMI-A-2] removing connector from sysfs

<7> [285.004968] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [285.005280] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [285.014990] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<5> [286.420029] Setting dangerous option force_probe - tainting kernel

<6> [286.432838] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0

<7> [286.434801] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K

<7> [286.435210] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [286.435493] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH

<7> [286.435755] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [286.436098] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [286.436702] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [286.437088] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [286.438419] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [286.438773] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [286.439120] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [286.439476] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [286.439490] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [286.440448] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [286.440506] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [286.440908] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [286.441285] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7716 MiB [mem 0x00000000-0x1e24e6fff], io: n/a

<7> [286.441616] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a

<7> [286.442629] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018

<7> [286.443137] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [286.443536] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [286.443950] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [286.444345] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [286.451898] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [286.452234] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [286.452491] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [286.452746] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [286.453089] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [286.453422] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [286.453689] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no

<7> [286.453988] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [286.454329] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [286.454588] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no

<7> [286.454845] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes

<7> [286.455224] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no

<7> [286.455551] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3

<7> [286.455807] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [286.456077] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0

<7> [286.456368] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0

<7> [286.457208] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [286.457497] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203

<7> [286.457760] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [286.458062] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [286.458377] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [286.458637] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [286.458942] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 848)

<7> [286.459330] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [286.459726] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [286.460138] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [286.460533] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [286.460876] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136)

<7> [286.461151] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [286.461403] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [286.461726] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [286.462140] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [286.462533] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [286.462935] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [286.463311] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [286.463589] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [286.463840] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [286.464119] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [286.464470] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [286.464854] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [286.465260] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [286.465671] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [286.466139] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [286.466422] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [286.466684] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [286.467049] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [286.467432] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [286.467814] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [286.468320] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [286.468623] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [286.468894] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [286.469186] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [286.469667] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [286.470073] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [286.470463] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [286.470825] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [286.471776] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<7> [286.473245] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [286.473602] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [286.473872] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [286.474271] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [286.474633] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<6> [286.475055] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [286.475331] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [286.475695] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [286.475988] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided

<7> [286.476286] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec)

<7> [286.476534] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec)

<7> [286.476781] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec)

<7> [286.477041] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec)

<7> [286.477330] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec)

<7> [286.477578] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec)

<7> [286.477826] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec)

<7> [286.478095] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec)

<7> [286.478415] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec)

<7> [286.478787] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec)

<7> [286.479190] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec)

<7> [286.479566] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec)

<7> [286.479988] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec)

<7> [286.480331] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec)

<7> [286.480579] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec)

<7> [286.485300] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available.

<7> [286.489020] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [286.489471] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI A/PHY A] Using AUX CH A (VBT)

<7> [286.489916] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:108:DDI A/PHY A]

<7> [286.495949] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [286.496367] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [286.496749] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [286.497213] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [286.497612] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [286.498026] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [286.498405] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP

<7> [286.498780] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [286.499186] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0

<7> [286.499564] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0

<7> [286.502440] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:108:DDI A/PHY A] initial power sequencer: PPS 0

<7> [286.502876] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [286.503258] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [286.503619] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [286.503994] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [286.504350] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [286.504752] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [286.505390] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on

<7> [286.505785] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [286.506236] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [286.516069] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [286.516393] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [286.516640] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [286.725714] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [286.726621] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [286.728540] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00

<7> [286.733216] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [286.754280] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [286.754320] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [286.754343] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [286.754671] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [286.755826] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [286.757522] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:109:eDP-1] DRRS type: static

<7> [286.759551] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:109:eDP-1] Using native PCH PWM for backlight control

<7> [286.761377] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:109:eDP-1] backlight initialized, disabled, brightness 0/937

<7> [286.763818] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [286.765464] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [286.767100] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [286.768736] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [286.770347] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [286.772043] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [286.775412] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:116:DDI B/PHY B] Using AUX CH B (VBT)

<7> [286.777291] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:116:DDI B/PHY B]

<7> [286.782711] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [286.784595] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:116:DDI B/PHY B]

<7> [286.786274] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:116:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [286.790103] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:131:DDI C/PHY C] Using AUX CH C (VBT)

<7> [286.792058] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:131:DDI C/PHY C]

<7> [286.796345] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [286.798220] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:131:DDI C/PHY C]

<7> [286.799884] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:131:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [286.804965] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] hw state readout: disabled

<7> [286.807593] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] hw state readout: disabled

<7> [286.810178] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] hw state readout: disabled

<7> [286.812160] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A

<7> [286.814178] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] hw state readout: disabled, pipe A

<7> [286.816158] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] hw state readout: disabled, pipe A

<7> [286.818106] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] hw state readout: disabled, pipe B

<7> [286.820110] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] hw state readout: disabled, pipe B

<7> [286.822083] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] hw state readout: disabled, pipe B

<7> [286.824059] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] hw state readout: disabled, pipe C

<7> [286.826003] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] hw state readout: disabled, pipe C

<7> [286.827946] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] hw state readout: disabled, pipe C

<7> [286.829824] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [286.831746] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:116:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [286.833478] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DP-MST A] hw state readout: disabled, pipe A

<7> [286.835037] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST B] hw state readout: disabled, pipe B

<7> [286.836515] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST C] hw state readout: disabled, pipe C

<7> [286.838298] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:131:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [286.840034] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DP-MST A] hw state readout: disabled, pipe A

<7> [286.841804] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST B] hw state readout: disabled, pipe B

<7> [286.843111] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST C] hw state readout: disabled, pipe C

<7> [286.844368] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [286.845646] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [286.848181] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [286.849469] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [286.850970] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:eDP-1] hw state readout: disabled

<7> [286.852087] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:117:DP-1] hw state readout: disabled

<7> [286.859084] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:126:HDMI-A-1] hw state readout: disabled

<7> [286.860115] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:132:DP-2] hw state readout: disabled

<7> [286.860954] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:138:HDMI-A-2] hw state readout: disabled

<7> [286.861576] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz

<7> [286.862236] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] min_cdclk 0 kHz

<7> [286.862863] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] min_cdclk 0 kHz

<7> [286.863492] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] min_cdclk 0 kHz

<7> [286.864141] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] min_cdclk 0 kHz

<7> [286.864757] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] min_cdclk 0 kHz

<7> [286.865410] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] min_cdclk 0 kHz

<7> [286.866048] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] min_cdclk 0 kHz

<7> [286.866669] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] min_cdclk 0 kHz

<7> [286.867297] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] min_cdclk 0 kHz

<7> [286.867938] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] min_cdclk 0 kHz

<7> [286.868556] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] min_cdclk 0 kHz

<7> [286.869208] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:57:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [286.869751] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:82:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [286.870266] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:107:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [286.872359] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [setup_hw_state]

<7> [286.872930] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [setup_hw_state]

<7> [286.873423] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [setup_hw_state]

<7> [286.873933] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [286.874590] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [286.875036] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [286.875481] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [286.876992] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global

<7> [286.881009] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [286.881507] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [286.881961] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0

<7> [286.909822] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [286.910130] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [286.910344] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [286.910555] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [286.910769] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 0: start 0x8

<7> [286.911083] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 1: start 0x108

<7> [286.911502] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 2: start 0x208

<7> [286.911939] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 3: start 0x308

<7> [286.912364] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 4: start 0x3c8

<7> [286.912788] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 0: start 0x8

<7> [286.913220] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 1: start 0x108

<7> [286.913646] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 2: start 0x208

<7> [286.914093] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 3: start 0x308

<7> [286.914519] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 4: start 0x3c8

<7> [286.914956] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 0: start 0x8

<7> [286.915378] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 1: start 0x108

<7> [286.915802] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 2: start 0x208

<7> [286.916235] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 3: start 0x308

<7> [286.916661] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 4: start 0x3c8

<7> [286.917501] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [fastset]

<7> [286.917982] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [fastset]

<7> [286.918388] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [fastset]

<7> [286.919176] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [286.920195] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:82:pipe B]

<7> [286.920926] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:107:pipe C]

<7> [286.921608] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [286.928684] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:109:eDP-1] adding connector to sysfs

<7> [286.930614] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:109:eDP-1] backlight device intel_backlight registered

<7> [286.931149] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:109:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [286.932200] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [286.936574] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:eDP-1] generating connector hotplug event

<7> [286.936735] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:117:DP-1] adding connector to sysfs

<7> [286.940330] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [286.944953] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:117:DP-1] generating connector hotplug event

<7> [286.945114] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:126:HDMI-A-1] adding connector to sysfs

<7> [286.946746] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:126:HDMI-A-1] generating connector hotplug event

<7> [286.947436] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:132:DP-2] adding connector to sysfs

<7> [286.949472] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [286.951814] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:132:DP-2] generating connector hotplug event

<7> [286.952100] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:138:HDMI-A-2] adding connector to sysfs

<7> [286.953172] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:138:HDMI-A-2] generating connector hotplug event

<6> [286.953268] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0

<7> [286.958544] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [286.991483] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [287.000707] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input39

<7> [287.004630] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [287.009309] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [287.011053] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:57:pipe A] not active, skipping

<7> [287.011474] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:82:pipe B] not active, skipping

<7> [287.011814] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:107:pipe C] not active, skipping

<7> [287.012175] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config

<7> [287.013685] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [287.014228] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:117:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [287.014677] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [287.016010] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [287.016436] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [287.017039] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [287.017495] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [287.017507] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [287.017920] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [287.021167] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [287.023032] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [287.023044] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [287.023556] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:126:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [287.024184] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [287.028723] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:132:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [287.029218] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [287.029898] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [287.030346] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [287.031010] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [287.031457] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [287.031468] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [287.031877] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [287.035343] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [287.035356] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [287.035806] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:138:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [287.036958] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [287.037398] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [287.037414] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [287.039146] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [287.039575] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [287.040007] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [287.041057] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [287.041072] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [287.041080] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [287.041119] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no

<7> [287.041533] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [287.041954] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [287.044134] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] status updated from unknown to connected

<7> [287.044173] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [287.044588] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:

<7> [287.044600] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [287.044611] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [287.044624] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [287.044636] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [287.049341] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [287.049361] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [287.049373] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [287.050934] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [287.051364] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [287.051962] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [287.052533] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [287.052545] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [287.053039] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [287.056521] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [287.056534] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [287.057076] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [287.057092] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [287.057104] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [287.061638] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [287.061658] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [287.061670] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [287.062508] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [287.062931] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [287.063514] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [287.064031] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [287.064044] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [287.064451] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [287.067962] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [287.067977] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [287.068459] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [287.068474] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? yes

<7> [287.068484] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no

<7> [287.068493] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no

<7> [287.068501] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no

<7> [287.068509] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no

<7> [287.068568] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [287.068603] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] found preferred mode: 3200x1800

<7> [287.068612] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [287.068645] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:57:pipe A] desired mode 3200x1800 set (0,0)

<7> [287.068782] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [287.068839] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] no BIOS fb, allocating a new one

<7> [287.075644] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 3200x1800 fb: 0x00180000

<6> [287.077193] fbcon: i915drmfb (fb0) is primary device

<6> [287.078437] Console: switching to colour frame buffer device 200x56

<6> [287.078454] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device

<7> [287.078468] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9

<7> [287.078924] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0

<7> [287.079268] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no

<7> [287.079553] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no

<7> [287.079940] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no

<7> [287.080355] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes

<7> [287.080770] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes

<7> [287.081198] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no

<7> [287.081600] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes

<7> [287.082035] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no

<7> [287.082443] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes

<7> [287.082830] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no

<7> [287.083264] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes

<7> [287.083677] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no

<7> [287.084099] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes

<7> [287.084508] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes

<7> [287.084927] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no

<7> [287.085332] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no

<7> [287.085739] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes

<7> [287.086153] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes

<7> [287.086557] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no

<7> [287.086977] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz

<7> [287.087769] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [287.087789] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [287.089306] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [287.089333] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [287.090419] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [287.090832] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [287.091230] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [287.091750] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [287.091762] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [287.091780] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [287.091842] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no

<7> [287.092246] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [287.092637] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [287.094872] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:

<7> [287.094892] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [287.094901] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [287.094930] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [287.094943] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [287.096169] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device

<7> [287.096526] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [287.096869] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [287.097228] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [287.097566] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [287.097903] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [287.100073] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [287.100095] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [287.100108] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [287.101412] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9

<7> [287.101710] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9

<7> [287.101942] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9

<7> [287.102168] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0

<7> [287.102483] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0

<7> [287.102804] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2

<7> [287.103138] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21

<7> [287.103459] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000

<7> [287.103779] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE

<7> [287.104104] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48

<7> [287.104384] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2

<7> [287.104587] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39

<7> [287.104827] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no

<7> [287.105168] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no

<7> [287.105491] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no

<7> [287.105811] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes

<7> [287.106139] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no

<7> [287.106458] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no

<7> [287.106775] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes

<7> [287.107099] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes

<7> [287.107295] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no

<7> [287.107488] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no

<7> [287.107681] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no

<7> [287.107872] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes

<7> [287.108162] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no

<7> [287.108465] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no

<7> [287.108696] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no

<7> [287.108890] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no

<7> [287.109215] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no

<7> [287.109539] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no

<7> [287.109860] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes

<7> [287.110184] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes

<7> [287.110500] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no

<7> [287.110818] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no

<7> [287.111150] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no

<7> [287.111460] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no

<7> [287.111657] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no

<7> [287.111865] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no

<7> [287.112163] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no

<7> [287.112480] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no

<7> [287.112797] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes

<7> [287.113134] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no

<7> [287.113456] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes

<7> [287.113774] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes

<7> [287.114102] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no

<7> [287.114405] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes

<7> [287.114601] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no

<7> [287.114808] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no

<7> [287.115109] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no

<7> [287.115431] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no

<7> [287.115752] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled

<7> [287.116089] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403

<7> [287.116412] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001

<7> [287.116726] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3

<7> [287.117056] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007

<7> [287.117367] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000

<7> [287.117613] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000

<7> [287.117821] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24

<7> [287.118084] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8

<7> [287.118395] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no

<7> [287.118716] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no

<7> [287.119050] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes

<6> [287.119373] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [287.119377] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [287.119382] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [287.119433] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [287.119848] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [287.120457] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [287.120851] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [287.120861] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [287.121180] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [287.124621] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [287.124633] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [287.125168] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [287.125185] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [287.125197] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [287.129678] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [287.129701] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [287.129714] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [287.132200] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [287.132567] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [287.133118] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [287.133444] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [287.133456] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [287.133792] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [287.137238] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [287.137254] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [287.137654] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [287.137670] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? yes

<7> [287.137680] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no

<7> [287.137688] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no

<7> [287.137697] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no

<7> [287.137705] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no

<7> [287.138575] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [287.138626] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] found preferred mode: 3200x1800

<7> [287.138637] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [287.138717] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:57:pipe A] desired mode 3200x1800 set (0,0)

<7> [287.139718] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:109:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [287.140056] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:108:DDI A/PHY A][CRTC:57:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [287.140340] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000

<7> [287.140705] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [287.141095] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:108:DDI A/PHY A] [CRTC:57:pipe A]

<7> [287.141453] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [287.141812] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [287.142171] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [287.142520] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [287.142771] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [287.143070] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [287.143436] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [287.143801] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [287.144176] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [287.144536] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [287.144887] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<6> [287.145047] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4

<7> [287.145177] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [287.145427] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [287.145753] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [287.146151] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [287.146521] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [287.146888] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [287.147285] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [287.147637] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [287.148022] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [287.148277] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [287.148563] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [287.148949] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [287.149317] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [287.149681] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [287.150062] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [287.150414] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [287.150691] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [287.150953] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [287.151300] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [287.151667] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [287.152069] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [287.152435] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [287.152796] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [287.153178] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [287.153531] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dpll_hw_state

<7> [287.153883] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [287.154275] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0

<7> [287.154641] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [287.155022] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [287.155380] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [287.155735] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [287.156097] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [287.156349] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [287.156595] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset

<7> [287.157722] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [287.158122] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [287.158470] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [287.158750] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [287.159053] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [287.159402] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [287.159761] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [287.160341] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [287.160759] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [287.161185] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [287.161533] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [287.161886] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [287.162267] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:57:pipe A] allocated DPLL 0

<7> [287.162629] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:57:pipe A] reserving DPLL 0

<7> [287.163003] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: yes [modeset]

<7> [287.163352] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [287.163699] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [287.164062] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [287.164426] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [287.164788] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [287.165172] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [287.165529] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [287.165877] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [287.166242] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [287.166601] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [287.166967] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [287.167335] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [287.167672] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [287.168025] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [287.168360] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [287.168700] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [287.169063] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [287.169433] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [287.169795] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [287.170161] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [287.170524] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [287.170860] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [287.171220] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [287.171563] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [287.171904] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [287.172256] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [287.172590] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [287.172838] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [287.173184] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [287.173563] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [287.173937] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [287.174309] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [287.174657] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [287.175006] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [287.175341] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [287.175578] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [287.175813] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [287.176141] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [287.176491] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [287.176844] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [287.177202] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [287.177548] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [287.177882] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [287.178167] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:110] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [287.178404] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [287.178689] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [287.179054] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [287.179407] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [287.181109] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [287.182341] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A]

<7> [287.182715] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B]

<7> [287.183074] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A]

<7> [287.183381] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B]

<7> [287.183625] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C]

<7> [287.183901] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C]

<7> [287.184273] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A]

<7> [287.184634] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B]

<7> [287.185005] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C]

<7> [287.186039] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:57:pipe A]

<7> [287.186428] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [287.187260] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power on

<7> [287.187757] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [287.188163] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [287.198947] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [287.199340] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power on

<7> [287.199731] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000000b

<7> [287.403397] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [287.404155] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [287.405219] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [287.408228] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [287.409010] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [287.410613] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [287.411147] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [287.411634] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [287.414012] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Clock recovery OK

<7> [287.414638] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [287.415321] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [287.417731] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [287.418490] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [287.419345] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [287.422220] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [287.423166] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [287.425271] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [287.427733] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [287.429034] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [287.431012] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 37

<7> [287.435249] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 375 us, max time under evasion is 250 us

<7> [287.444661] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [287.453458] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1]

<7> [287.455577] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [287.459380] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp

<6> [287.467471] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])

<7> [287.468774] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [287.469085] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [287.469121] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [287.469575] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [287.469257] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [287.469627] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [287.472606] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [287.473535] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [287.475044] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [287.476736] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [287.478461] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [287.478506] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [287.478540] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [287.478679] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no

<7> [287.480398] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [287.481906] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [287.489293] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:

<7> [287.489351] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [287.489398] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [287.489447] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [287.489490] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [287.491181] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [287.495474] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [287.495540] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [287.495585] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [287.501186] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [287.502784] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [287.507039] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [287.508775] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [287.508820] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [287.513994] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [287.521383] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [287.521446] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [287.524113] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [287.524176] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [287.524223] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [287.531079] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [287.531119] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [287.531148] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [287.532987] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [287.533967] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [287.535524] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [287.536574] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [287.536601] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [287.538008] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [287.542695] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [287.542720] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [287.543908] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [287.544162] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? yes

<7> [287.544183] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no

<7> [287.544199] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no

<7> [287.544215] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no

<7> [287.544230] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no

<7> [287.544332] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [287.544387] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] found preferred mode: 3200x1800

<7> [287.544404] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [287.545804] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:57:pipe A] desired mode 3200x1800 set (0,0)

<7> [287.547081] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [287.548462] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [287.548518] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [287.549604] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [287.550215] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [287.550722] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [287.552394] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [287.552726] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [287.552742] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [287.553187] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no

<7> [287.553630] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [287.554046] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [287.557841] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:

<7> [287.557859] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [287.557873] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [287.558107] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [287.558121] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [287.562717] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [287.562881] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [287.562901] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [287.564142] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [287.564357] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [287.564610] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [287.564839] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [287.565286] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [287.565679] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [287.565853] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [287.566388] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [287.566400] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [287.566451] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [287.566778] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [287.566799] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [287.567371] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [287.567759] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [287.568311] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [287.570117] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [287.570130] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [287.570568] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [287.570713] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [287.570723] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [287.575261] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [287.575392] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [287.575403] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [287.576086] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [287.576460] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [287.577120] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [287.577509] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [287.577519] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [287.577875] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [287.581275] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [287.581289] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [287.581725] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [287.589396] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [287.589416] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [287.593976] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<6> [287.594068] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input40

<7> [287.594990] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [287.595003] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [287.595667] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [287.596046] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [287.596609] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [287.597172] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<6> [287.597290] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input41

<7> [287.597184] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [287.597566] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [287.601995] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [287.602009] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [287.602445] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [287.603481] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [287.603494] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [287.608034] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [287.609011] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [287.609025] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [287.610445] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [287.610824] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [287.611604] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [287.612108] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [287.612119] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [287.612486] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [287.615799] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [287.615810] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [287.616273] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [287.617079] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [287.617092] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [287.617552] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [287.617922] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [287.618326] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [287.618739] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [287.618749] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [287.618757] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [287.618797] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no

<7> [287.619178] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [287.619552] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<6> [287.619847] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input42

<7> [287.620917] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:

<7> [287.620930] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [287.620973] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [287.621020] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [287.621031] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [287.625575] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [287.625630] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [287.625640] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [287.626402] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [287.626774] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [287.627616] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [287.628050] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [287.628061] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [287.628412] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [287.631846] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [287.631862] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [287.632863] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [287.632916] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [287.632927] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [287.637850] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [287.637902] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [287.637913] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [287.638610] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [287.639014] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [287.639584] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [287.640005] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [287.640016] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [287.640382] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [287.643811] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [287.643823] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [287.644259] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [287.646045] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:142]

<7> [288.698798] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:57:pipe A]

<7> [288.699431] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [288.700555] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [288.701086] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [288.701390] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [288.701641] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [288.701890] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [288.702173] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [288.702490] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [288.702740] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [288.703013] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [288.703292] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [288.703531] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [288.703769] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [288.704050] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [288.704308] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [288.704547] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [288.704787] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [288.705046] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [288.705308] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [288.705547] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [288.705784] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [288.706042] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [288.706302] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [288.706541] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [288.706796] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [288.707146] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [288.707432] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [288.707687] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [288.708011] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [288.708287] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [288.708537] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [288.708836] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [288.709110] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [288.709387] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [288.709632] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [288.709879] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [288.710147] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [288.710418] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [288.710660] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [288.710900] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset

<7> [288.711164] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0

<7> [288.711468] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [288.711725] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [288.711958] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [288.712208] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [288.712558] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [288.712835] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [288.713090] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [288.713411] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [288.713679] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz

<7> [288.713950] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [288.714218] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [288.714475] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [288.714731] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset]

<7> [288.715012] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [288.715285] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [288.715525] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [288.715937] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [288.717404] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [288.771645] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [288.922348] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0

<7> [288.924248] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [288.930306] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off

<7> [288.931152] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [288.932003] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short

<7> [288.933699] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [288.934953] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [288.986302] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [288.987409] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long

<7> [288.988410] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [288.990126] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [288.992056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [288.994051] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [288.994460] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A]

<7> [288.996450] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [288.996584] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [288.997921] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [289.000633] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A]

<7> [289.001727] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B]

<7> [289.002712] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A]

<7> [289.003930] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B]

<7> [289.004913] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C]

<7> [289.006121] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C]

<7> [289.007413] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A]

<7> [289.008611] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B]

<7> [289.009649] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C]

<7> [289.010782] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1]

<7> [289.012775] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [289.015835] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:82:pipe B]

<7> [289.017166] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:107:pipe C]

<7> [289.114754] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [289.116567] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [289.117804] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [289.119337] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [289.121708] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [289.141090] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [289.233853] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:109:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [289.234973] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:108:DDI A/PHY A][CRTC:57:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [289.235963] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000

<7> [289.237656] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [289.239286] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:108:DDI A/PHY A] [CRTC:57:pipe A]

<7> [289.240828] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [289.242412] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [289.244361] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [289.246194] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [289.247838] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [289.249460] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [289.250926] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [289.252568] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [289.254265] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [289.255719] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [289.257268] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [289.258812] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [289.260365] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [289.261727] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [289.263248] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [289.264833] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [289.266246] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [289.267752] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [289.269105] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [289.270462] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [289.271807] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [289.273169] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [289.274682] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [289.276079] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [289.277437] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [289.278804] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [289.280184] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [289.281545] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [289.282897] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [289.284275] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [289.285629] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [289.286998] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [289.288342] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [289.289722] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [289.291073] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [289.292427] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [289.293785] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [289.295163] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [289.296523] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [289.297894] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset

<7> [289.299481] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [289.300764] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [289.302079] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [289.303376] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [289.304661] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [289.305973] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [289.307125] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [289.308235] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [289.309709] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [289.311082] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [289.312395] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [289.313714] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [289.315049] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:57:pipe A] allocated DPLL 0

<7> [289.316306] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:57:pipe A] reserving DPLL 0

<7> [289.317377] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: yes [modeset]

<7> [289.318475] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [289.319361] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [289.320443] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [289.321366] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [289.322455] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [289.323322] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [289.324366] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [289.325547] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [289.326641] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [289.327514] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [289.328586] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [289.329502] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [289.330559] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [289.331470] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [289.332529] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [289.333614] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [289.334654] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [289.335536] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [289.336438] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [289.337447] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [289.338490] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [289.339358] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [289.340422] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [289.341308] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [289.342483] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [289.343383] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [289.344608] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [289.345957] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [289.347329] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [289.348549] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [289.349424] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [289.350002] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [289.350654] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [289.351532] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [289.352433] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [289.353305] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [289.354218] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [289.354980] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [289.355572] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [289.356403] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [289.357310] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [289.357940] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [289.358599] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [289.359258] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:110] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [289.359881] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [289.360471] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [289.360994] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [289.361465] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [289.374127] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [289.383904] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [289.384388] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [289.385292] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [289.386201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [289.387080] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [289.388196] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A]

<7> [289.388655] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B]

<7> [289.389115] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A]

<7> [289.389550] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B]

<7> [289.389979] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C]

<7> [289.390436] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C]

<7> [289.390872] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A]

<7> [289.391333] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B]

<7> [289.391767] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C]

<7> [289.392527] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:57:pipe A]

<7> [289.392988] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [289.393754] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power on

<7> [289.394357] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (98 ms remaining)

<7> [289.498465] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [289.508157] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [289.508553] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power on

<7> [289.508933] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003

<7> [289.558414] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [289.559520] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long

<7> [289.560528] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [289.561608] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [289.713295] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [289.714600] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [289.715900] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [289.719363] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on

<7> [289.721002] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b

<7> [289.728647] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [289.729902] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [289.733570] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [289.735155] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [289.736706] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [289.740719] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Clock recovery OK

<7> [289.742337] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [289.743713] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [289.751525] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [289.752582] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [289.753789] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [289.758567] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [289.760095] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [289.762860] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [289.765749] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [289.766756] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [289.768394] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 37

<7> [289.772458] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 388 us, max time under evasion is 250 us

<7> [289.781653] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [289.786733] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1]

<7> [289.787904] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [289.793134] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [289.795956] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [289.803591] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [289.805005] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [289.805978] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [289.807150] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [289.808152] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [289.808180] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [289.809917] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [289.815293] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [289.815336] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [289.819871] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [289.828328] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [289.829974] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [289.831273] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [289.832742] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [289.834115] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [289.834150] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [289.835295] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [289.840173] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [289.840202] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [289.937617] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [289.938437] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [289.951248] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [289.976745] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [289.977109] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [289.989202] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [290.045345] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [290.049532] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [290.058054] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [290.058522] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [290.058845] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [290.059211] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [290.059644] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [290.059966] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [290.060334] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [290.060738] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [290.061110] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [290.062177] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [290.151671] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [290.152804] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [290.153324] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [290.153963] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<6> [290.159491] Console: switching to colour dummy device 80x25

<7> [290.161378] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:110] is removed

<7> [290.161644] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [290.162683] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [290.163727] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [290.164680] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [290.165632] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [290.167104] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [290.181981] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [290.185603] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [290.186486] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [290.187228] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [290.188267] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [290.189395] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [290.190520] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [290.191480] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [290.192486] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [290.193456] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [290.194438] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [290.195417] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [290.196447] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [290.197506] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [290.198549] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [290.199549] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [290.200533] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [290.201508] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [290.202485] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [290.203446] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [290.204451] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [290.205418] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [290.206389] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [290.207361] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [290.208333] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [290.209311] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [290.210285] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [290.211256] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [290.212235] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [290.213207] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [290.214192] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [290.215163] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [290.216141] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [290.217103] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [290.218082] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [290.218996] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [290.219989] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [290.220972] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [290.221943] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [290.222917] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [290.223923] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset

<7> [290.224890] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0

<7> [290.226239] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [290.227834] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [290.228702] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [290.229565] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [290.230514] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [290.231477] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [290.232439] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset]

<7> [290.233383] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [290.234070] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [290.234687] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [290.236801] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [290.442452] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0

<7> [290.444123] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [290.451689] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off

<7> [290.452202] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [290.452942] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [290.453419] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short

<7> [290.454168] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [290.505416] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [290.505675] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [290.506577] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long

<7> [290.507746] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [290.508287] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A]

<7> [290.509222] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [290.510367] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [290.510587] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [290.512443] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [290.516305] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A]

<7> [290.518373] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B]

<7> [290.520181] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A]

<7> [290.521834] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B]

<7> [290.523456] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C]

<7> [290.525163] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C]

<7> [290.526958] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A]

<7> [290.528760] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B]

<7> [290.530528] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C]

<7> [290.532197] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1]

<7> [290.535330] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [290.609058] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [290.655270] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:109:eDP-1] removing connector from sysfs

<7> [290.683385] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:117:DP-1] removing connector from sysfs

<7> [290.690942] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:126:HDMI-A-1] removing connector from sysfs

<7> [290.703000] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:132:DP-2] removing connector from sysfs

<7> [290.708637] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:138:HDMI-A-2] removing connector from sysfs

<7> [290.735487] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (272 ms remaining)

<7> [291.010688] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [291.021305] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<6> [291.632393] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS

<6> [291.633816] [IGT] i915_pm_rpm: exiting, ret=0

Results for igt@i915_pm_rpm@module-reload