igt@i915_pm_rpm@module-reload on fi-skl-6600u@IGT

Detail	Value
Duration	12.61 seconds
Igt-Version	IGT-Version: 2.3-gb4d90c9c0 (x86_64) (Linux: 6.19.0-rc4-CI_DRM_17764-g211191d88d04+ x86_64)
Out	Using IGT_SRANDOM=1767601942 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff888114c21818 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] hsw_get_pipe_config+0x1b9/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x740 [i915] intel_atomic_commit_tail+0x1276/0x1cb0 [i915] intel_atomic_commit+0x2e8/0x330 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x407/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 __x64_sys_ioctl+0xa5/0x100 Starting subtest: module-reload Reloading i915 with disable_display=1 mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 2 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff888109f39818 has 1/2 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get+0x1a/0x30 [i915] intel_display_rpm_get+0x1f/0x30 [i915] intel_display_power_get+0x22/0x70 [i915] intel_audio_component_get_power+0x2f/0x180 [i915] snd_hdac_display_power+0x8a/0x1c0 [snd_hda_core] azx_probe_continue+0x24f/0x9f0 [snd_hda_intel] azx_probe_work+0x15/0x20 [snd_hda_intel] process_one_work+0x22e/0x6b0 worker_thread+0x1e8/0x3d0 kthread+0x11f/0x250 ret_from_fork+0x344/0x3a0 ret_from_fork_asm+0x1a/0x30 ref_tracker: intel_runtime_pm@ffff888109f39818 has 1/2 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get+0x1a/0x30 [i915] intel_display_rpm_get+0x1f/0x30 [i915] intel_display_power_get+0x22/0x70 [i915] intel_pps_vdd_on_unlocked+0xbd/0x360 [i915] intel_dp_aux_xfer+0x12b/0x960 [i915] intel_dp_aux_transfer+0xd4/0x330 [i915] drm_dp_dpcd_access+0xc3/0x160 [drm_display_helper] drm_dp_dpcd_read+0x87/0x160 [drm_display_helper] intel_alpm_init+0x39/0x90 [i915] intel_dp_init_connector+0x9c4/0x14e0 [i915] intel_ddi_init+0xd03/0x1220 [i915] intel_bios_for_each_encoder+0x39/0x60 [i915] intel_setup_outputs+0x1f4/0xc20 [i915] intel_display_driver_probe_nogem+0x110/0x1e0 [i915] Reloading i915 with mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff88813ec31818 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] hsw_get_pipe_config+0x1b9/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x740 [i915] intel_atomic_commit_tail+0x1276/0x1cb0 [i915] intel_atomic_commit+0x2e8/0x330 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x407/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 __x64_sys_ioctl+0xa5/0x100 Subtest module-reload: SUCCESS (12.605s)
Err	Starting subtest: module-reload Subtest module-reload: SUCCESS (12.605s)
Dmesg	<6> [292.153725] Console: switching to colour dummy device 80x25 <6> [292.154861] [IGT] i915_pm_rpm: executing <7> [292.158697] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [292.159575] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [292.159590] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [292.160270] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [292.160528] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [292.160819] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [292.161096] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [292.161108] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [292.161152] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [292.161193] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no <7> [292.161480] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [292.161746] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [292.163621] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes: <7> [292.163632] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [292.163640] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [292.163751] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [292.163759] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [292.168109] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [292.168212] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [292.168220] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [292.168948] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.169221] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [292.170067] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.170423] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.170433] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.170657] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [292.173770] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.173779] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [292.174047] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [292.174176] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [292.174192] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [292.178641] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [292.178727] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [292.178734] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [292.179221] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.179554] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [292.180074] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.180472] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.180481] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.180812] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [292.183953] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.183962] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [292.184267] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [292.191552] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [292.191564] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [292.195934] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [292.196854] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [292.196867] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [292.197542] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.197870] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [292.198272] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.198545] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.198553] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.198882] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [292.202069] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.202080] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [292.202495] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [292.203465] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [292.203476] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [292.207930] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [292.208808] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [292.208820] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [292.209508] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.209862] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [292.210269] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.210519] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.210526] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.210838] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [292.214642] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.214651] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [292.214937] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [292.215651] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [292.215664] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [292.216094] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [292.216475] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [292.216809] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [292.217142] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [292.217152] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [292.217159] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [292.217194] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no <7> [292.217483] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [292.217704] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [292.219009] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes: <7> [292.219020] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [292.219032] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [292.219074] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [292.219084] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [292.223563] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [292.223596] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [292.223604] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [292.224088] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.224367] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [292.224935] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.225358] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.225368] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.225706] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [292.228848] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.228856] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [292.229139] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [292.229181] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [292.229192] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [292.233616] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [292.233646] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [292.233654] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [292.234155] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.234504] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [292.235037] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.235443] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.235452] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.235788] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [292.238935] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.238946] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [292.239336] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [292.240080] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:143] <7> [292.481703] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [293.284881] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:57:pipe A] <7> [293.285548] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [293.286380] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [293.286627] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [293.286867] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [293.287125] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [293.287395] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [293.287635] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [293.287873] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [293.288145] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [293.288400] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [293.288639] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [293.288878] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [293.289138] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [293.289396] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [293.289634] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [293.289873] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [293.290129] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [293.290387] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [293.290625] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [293.290863] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [293.291117] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [293.291376] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [293.291614] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [293.291853] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [293.292091] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [293.292346] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [293.292607] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [293.292845] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [293.293094] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [293.293352] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [293.293614] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [293.293942] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [293.294205] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [293.294469] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [293.294760] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [293.295028] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [293.295291] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [293.295564] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [293.295925] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [293.296326] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset <7> [293.296708] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0 <7> [293.297154] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [293.297550] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [293.297925] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [293.298320] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [293.298669] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [293.298914] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [293.299192] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [293.299639] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [293.300075] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz <7> [293.300694] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [293.301074] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [293.301454] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [293.301820] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset] <7> [293.302163] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [293.302455] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [293.302714] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [293.303172] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [293.304753] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [293.512343] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0 <7> [293.515396] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [293.526290] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off <7> [293.527101] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [293.527964] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short <7> [293.529792] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time <7> [293.530982] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [293.582994] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [293.583976] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long <7> [293.584865] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [293.586596] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [293.588788] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [293.590061] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [293.591399] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [293.593654] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A] <7> [293.596324] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [293.597774] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [293.600621] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A] <7> [293.602042] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B] <7> [293.603033] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A] <7> [293.604126] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B] <7> [293.604942] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C] <7> [293.605795] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C] <7> [293.606837] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A] <7> [293.607699] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B] <7> [293.608758] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C] <7> [293.609637] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1] <7> [293.611847] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [293.613885] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:82:pipe B] <7> [293.614522] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:107:pipe C] <7> [293.720657] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [293.722717] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [293.724459] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [293.726517] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [293.729722] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [293.752447] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [293.824964] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:109:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [293.826231] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:108:DDI A/PHY A][CRTC:57:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [293.827735] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000 <7> [293.828940] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [293.830547] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:108:DDI A/PHY A] [CRTC:57:pipe A] <7> [293.831475] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [293.832453] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [293.833429] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [293.834581] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [293.835462] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [293.836926] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [293.837929] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [293.838869] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [293.839757] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [293.840711] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [293.841592] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [293.842503] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [293.843456] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [293.844424] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [293.845297] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [293.846283] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [293.847434] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [293.848415] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [293.849299] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [293.850222] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [293.851034] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [293.851941] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [293.852871] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [293.853884] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [293.854965] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [293.855864] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [293.857153] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [293.857996] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [293.858900] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [293.859845] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [293.861067] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [293.862411] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [293.863745] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [293.865082] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [293.866417] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [293.867569] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [293.868538] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [293.869844] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [293.871185] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [293.872537] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset <7> [293.874075] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [293.875397] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [293.876612] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [293.877658] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [293.878541] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [293.879595] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [293.880502] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [293.881788] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [293.882807] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [293.883894] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [293.884790] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [293.886037] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [293.887034] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:57:pipe A] allocated DPLL 0 <7> [293.888162] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:57:pipe A] reserving DPLL 0 <7> [293.889026] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: yes [modeset] <7> [293.889951] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [293.891003] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [293.891881] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [293.892918] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [293.893821] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [293.894985] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [293.895945] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [293.896901] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [293.897777] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [293.898715] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [293.899605] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [293.900507] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [293.901370] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [293.902327] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [293.903209] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [293.904304] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [293.905168] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [293.906429] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [293.907767] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [293.909129] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [293.910450] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [293.911773] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [293.912842] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [293.913790] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [293.915146] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [293.916315] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [293.917198] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [293.918044] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [293.918822] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [293.919596] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [293.920486] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [293.921368] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [293.922251] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [293.923123] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [293.923955] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [293.924764] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [293.925422] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [293.925854] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [293.926306] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [293.926810] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [293.927269] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [293.927765] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [293.928203] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [293.928704] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:110] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [293.929158] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [293.929717] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [293.930173] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [293.930667] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [293.943187] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [293.951537] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [293.951999] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [293.952417] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [293.953387] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [293.954421] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [293.955256] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A] <7> [293.955563] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B] <7> [293.955929] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A] <7> [293.956317] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B] <7> [293.956678] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C] <7> [293.957029] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C] <7> [293.957398] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A] <7> [293.957709] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B] <7> [293.957965] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C] <7> [293.958435] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:57:pipe A] <7> [293.958685] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [293.959246] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power on <7> [293.959741] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (129 ms remaining) <7> [294.096575] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [294.173281] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [294.174471] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power on <7> [294.175591] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003 <7> [294.224969] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [294.226081] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long <7> [294.227085] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [294.228187] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [294.384509] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [294.386013] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [294.387426] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [294.390841] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on <7> [294.392754] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b <7> [294.398296] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [294.399264] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [294.402491] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [294.403701] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [294.404895] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [294.409160] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Clock recovery OK <7> [294.410757] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [294.412194] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [294.416303] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [294.417540] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [294.418544] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [294.421967] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [294.422981] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [294.425214] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [294.427935] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [294.429156] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [294.430664] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 37 <7> [294.443856] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [294.448867] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1] <7> [294.450122] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [294.454833] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <6> [294.458464] [IGT] i915_pm_rpm: starting subtest module-reload <7> [294.457978] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [294.463698] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [294.465583] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [294.466893] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [294.468421] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [294.470368] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [294.470408] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [294.471778] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [294.477518] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [294.477557] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [294.479143] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [294.484819] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [294.486589] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [294.487906] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [294.489394] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [294.490757] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [294.490792] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [294.492048] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [294.497611] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [294.497647] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [294.612669] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [294.613529] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [294.625953] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [294.651707] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [294.652175] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [294.664904] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [294.702869] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [294.704040] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [294.712021] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [294.712559] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [294.712994] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [294.715138] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [294.715611] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [294.716043] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [294.716756] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [294.717135] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [294.717564] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [294.719119] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [294.809906] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [294.810683] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [294.810989] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [294.811317] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [294.813176] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:110] is removed <7> [294.813343] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [294.813891] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [294.814508] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [294.815033] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [294.815609] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [294.816515] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [294.827442] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [294.829566] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [294.830058] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [294.830627] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [294.831306] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [294.831962] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [294.832634] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [294.833324] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [294.833976] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [294.834654] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [294.835336] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [294.835996] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [294.836771] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [294.837599] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [294.838290] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [294.838946] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [294.839631] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [294.840306] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [294.840959] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [294.841625] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [294.842311] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [294.842962] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [294.843694] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [294.844362] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [294.845013] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [294.846379] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [294.847046] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [294.847725] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [294.848397] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [294.849050] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [294.849720] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [294.850386] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [294.851034] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [294.851705] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [294.852374] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [294.853022] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [294.853714] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [294.854383] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [294.855033] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [294.855706] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [294.856374] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset <7> [294.857024] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0 <7> [294.857827] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [294.858588] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [294.859415] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [294.860087] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [294.860726] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [294.861379] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [294.862028] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset] <7> [294.862709] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [294.863370] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [294.864017] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [294.865545] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [295.073297] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0 <7> [295.075934] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [295.097428] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off <7> [295.098550] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [295.099671] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short <7> [295.101140] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time <7> [295.102446] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [295.153422] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [295.154491] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long <7> [295.155495] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [295.155822] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [295.159703] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [295.160686] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [295.162373] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A] <7> [295.163865] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [295.165151] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [295.169269] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A] <7> [295.171051] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B] <7> [295.172593] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A] <7> [295.174119] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B] <7> [295.175512] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C] <7> [295.176775] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C] <7> [295.178134] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A] <7> [295.179619] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B] <7> [295.181128] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C] <7> [295.182621] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1] <7> [295.185466] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [295.261739] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [295.282702] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:109:eDP-1] removing connector from sysfs <7> [295.290136] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:117:DP-1] removing connector from sysfs <7> [295.295849] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:126:HDMI-A-1] removing connector from sysfs <7> [295.308966] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:132:DP-2] removing connector from sysfs <7> [295.309821] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:138:HDMI-A-2] removing connector from sysfs <7> [295.336358] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (321 ms remaining) <7> [295.664458] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [295.675265] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [296.362104] [IGT] Reloading i915 w/o display <5> [297.228686] Setting dangerous option force_probe - tainting kernel <6> [297.241025] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0 <7> [297.243381] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K <7> [297.243777] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [297.244099] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH <7> [297.244385] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [297.244702] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [297.245196] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [297.245557] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [297.246909] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [297.247194] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [297.247411] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [297.247625] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [297.247636] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [297.248377] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [297.248419] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [297.248682] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [297.248992] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7716 MiB [mem 0x00000000-0x1e24e6fff], io: n/a <7> [297.249219] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a <7> [297.249936] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018 <7> [297.250295] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [297.250599] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [297.250863] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [297.251156] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [297.260085] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [297.260384] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [297.260648] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [297.260911] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [297.261263] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [297.261597] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [297.261876] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no <7> [297.262232] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [297.262632] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [297.263024] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no <7> [297.263321] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes <7> [297.263650] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no <7> [297.263927] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3 <7> [297.264313] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [297.264648] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0 <7> [297.264932] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7> [297.265797] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [297.266141] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203 <7> [297.266423] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [297.266702] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [297.267021] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [297.267445] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [297.267843] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 848) <7> [297.268254] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [297.268670] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [297.269108] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [297.269531] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [297.269941] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136) <7> [297.270346] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [297.270753] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [297.271182] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [297.271602] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [297.272023] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [297.272437] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [297.272820] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [297.273222] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [297.273594] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [297.273970] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [297.274403] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [297.274803] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [297.275247] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [297.275664] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [297.276187] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [297.276615] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [297.277009] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [297.277429] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [297.277813] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [297.278218] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [297.278728] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [297.279135] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [297.279510] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [297.279830] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [297.280310] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [297.280653] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [297.280922] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [297.281265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [297.282181] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <7> [297.283357] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [297.283662] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [297.283937] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [297.284317] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [297.284806] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <6> [297.285620] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [297.285559] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [297.286015] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [297.286359] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7> [297.286675] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec) <7> [297.286942] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec) <7> [297.287227] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec) <7> [297.287591] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec) <7> [297.287892] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec) <7> [297.288202] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec) <7> [297.288536] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec) <7> [297.288804] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec) <7> [297.289114] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec) <7> [297.289431] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec) <7> [297.289698] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec) <7> [297.289964] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec) <7> [297.290267] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec) <7> [297.290653] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec) <7> [297.290936] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec) <7> [297.296008] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available. <7> [297.300288] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [297.300780] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI A/PHY A] Using AUX CH A (VBT) <7> [297.301305] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:108:DDI A/PHY A] <7> [297.308060] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [297.308504] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [297.308904] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [297.309460] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [297.309927] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [297.310351] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [297.310757] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP <7> [297.311328] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [297.311739] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0 <7> [297.312185] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0 <7> [297.312830] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:108:DDI A/PHY A] initial power sequencer: PPS 0 <7> [297.313290] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [297.313673] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [297.314079] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [297.314465] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [297.314844] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [297.315283] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [297.315901] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on <7> [297.316233] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [297.316587] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [297.327090] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [297.327411] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [297.327664] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [297.532363] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [297.533366] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [297.535424] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00 <7> [297.539922] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [297.559694] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [297.559747] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [297.559778] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [297.560557] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [297.562452] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [297.564279] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:109:eDP-1] DRRS type: static <7> [297.567161] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:109:eDP-1] Using native PCH PWM for backlight control <7> [297.569386] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:109:eDP-1] backlight initialized, disabled, brightness 0/937 <7> [297.572166] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [297.574317] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [297.575915] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [297.577788] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [297.579368] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [297.581292] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [297.585579] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:116:DDI B/PHY B] Using AUX CH B (VBT) <7> [297.588288] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:116:DDI B/PHY B] <7> [297.595835] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [297.598369] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:116:DDI B/PHY B] <7> [297.600636] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:116:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [297.605882] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:131:DDI C/PHY C] Using AUX CH C (VBT) <7> [297.608499] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:131:DDI C/PHY C] <7> [297.614078] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [297.616658] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:131:DDI C/PHY C] <7> [297.618961] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:131:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [297.623725] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] hw state readout: disabled <7> [297.625735] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] hw state readout: disabled <7> [297.627731] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] hw state readout: disabled <7> [297.629261] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [297.630359] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] hw state readout: disabled, pipe A <7> [297.631012] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] hw state readout: disabled, pipe A <7> [297.631803] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] hw state readout: disabled, pipe B <7> [297.632500] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] hw state readout: disabled, pipe B <7> [297.633263] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] hw state readout: disabled, pipe B <7> [297.633918] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] hw state readout: disabled, pipe C <7> [297.634758] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] hw state readout: disabled, pipe C <7> [297.635462] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] hw state readout: disabled, pipe C <7> [297.636375] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI A/PHY A] hw state readout: disabled, pipe A <7> [297.637387] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:116:DDI B/PHY B] hw state readout: disabled, pipe A <7> [297.638305] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DP-MST A] hw state readout: disabled, pipe A <7> [297.639203] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST B] hw state readout: disabled, pipe B <7> [297.639773] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST C] hw state readout: disabled, pipe C <7> [297.640310] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:131:DDI C/PHY C] hw state readout: disabled, pipe A <7> [297.640985] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DP-MST A] hw state readout: disabled, pipe A <7> [297.641692] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST B] hw state readout: disabled, pipe B <7> [297.642388] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST C] hw state readout: disabled, pipe C <7> [297.643165] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [297.643829] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [297.644386] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [297.645163] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [297.646125] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:eDP-1] hw state readout: disabled <7> [297.646947] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:117:DP-1] hw state readout: disabled <7> [297.647796] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:126:HDMI-A-1] hw state readout: disabled <7> [297.648397] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:132:DP-2] hw state readout: disabled <7> [297.648834] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:138:HDMI-A-2] hw state readout: disabled <7> [297.649321] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [297.649876] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] min_cdclk 0 kHz <7> [297.650455] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] min_cdclk 0 kHz <7> [297.651003] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] min_cdclk 0 kHz <7> [297.651573] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] min_cdclk 0 kHz <7> [297.652018] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] min_cdclk 0 kHz <7> [297.652426] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] min_cdclk 0 kHz <7> [297.652964] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] min_cdclk 0 kHz <7> [297.653537] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] min_cdclk 0 kHz <7> [297.654099] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] min_cdclk 0 kHz <7> [297.654647] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] min_cdclk 0 kHz <7> [297.655204] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] min_cdclk 0 kHz <7> [297.655623] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:57:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [297.656080] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:82:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [297.656625] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:107:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [297.657500] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [setup_hw_state] <7> [297.657965] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [setup_hw_state] <7> [297.658377] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [setup_hw_state] <7> [297.658700] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [297.659188] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [297.659582] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [297.659993] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [297.660470] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7> [297.663409] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [297.663891] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [297.664238] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0 <7> [297.685834] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [297.686111] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [297.686316] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [297.686518] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [297.686722] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 0: start 0x8 <7> [297.686990] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 1: start 0x108 <7> [297.687301] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 2: start 0x208 <7> [297.687695] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 3: start 0x308 <7> [297.688111] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 4: start 0x3c8 <7> [297.688507] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 0: start 0x8 <7> [297.688895] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 1: start 0x108 <7> [297.689296] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 2: start 0x208 <7> [297.689609] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 3: start 0x308 <7> [297.689874] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 4: start 0x3c8 <7> [297.690262] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 0: start 0x8 <7> [297.690645] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 1: start 0x108 <7> [297.690910] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 2: start 0x208 <7> [297.691191] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 3: start 0x308 <7> [297.691489] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 4: start 0x3c8 <7> [297.692209] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [fastset] <7> [297.692618] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [fastset] <7> [297.693016] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [fastset] <7> [297.693741] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [297.694466] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:82:pipe B] <7> [297.694893] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:107:pipe C] <7> [297.695515] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [297.702744] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:109:eDP-1] adding connector to sysfs <7> [297.704375] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:109:eDP-1] backlight device intel_backlight registered <7> [297.704871] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:109:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [297.705921] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [297.708337] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:eDP-1] generating connector hotplug event <7> [297.708490] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:117:DP-1] adding connector to sysfs <7> [297.710060] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [297.714625] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:117:DP-1] generating connector hotplug event <7> [297.714892] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:126:HDMI-A-1] adding connector to sysfs <7> [297.719324] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:126:HDMI-A-1] generating connector hotplug event <7> [297.719494] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:132:DP-2] adding connector to sysfs <7> [297.721156] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [297.724009] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:132:DP-2] generating connector hotplug event <7> [297.724190] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:138:HDMI-A-2] adding connector to sysfs <7> [297.725932] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:138:HDMI-A-2] generating connector hotplug event <6> [297.726106] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7> [297.732800] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [297.768617] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [297.779974] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input35 <7> [297.781902] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [297.786732] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [297.787411] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:117:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [297.787840] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [297.788305] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:126:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [297.788722] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [297.789117] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:132:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [297.789935] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:57:pipe A] not active, skipping <7> [297.790352] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:82:pipe B] not active, skipping <7> [297.790749] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:107:pipe C] not active, skipping <7> [297.791160] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config <7> [297.791567] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [297.791953] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:138:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [297.792384] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [297.794199] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [297.795223] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [297.795385] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [297.795400] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [297.795815] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] status updated from unknown to disconnected <7> [297.795830] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] disconnected <7> [297.795841] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:109:eDP-1] EDID changed, epoch counter 2 <7> [297.795868] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [297.795879] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [297.796298] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [297.797484] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [297.797639] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [297.797654] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [297.798105] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [297.798119] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [297.798130] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [297.798525] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [297.798537] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [297.798548] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [297.798932] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [297.798943] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [297.798952] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? no <7> [297.798961] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no <7> [297.798970] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no <7> [297.798979] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no <7> [297.798987] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no <7> [297.799069] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [297.799091] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [297.799206] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [297.799221] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [297.801901] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9 <7> [297.802396] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0 <7> [297.802810] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7> [297.803240] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no <7> [297.803652] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no <7> [297.804099] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7> [297.804509] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7> [297.804917] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no <7> [297.805357] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7> [297.805771] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7> [297.806215] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7> [297.806631] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7> [297.807057] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7> [297.807466] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7> [297.807878] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7> [297.808319] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes <7> [297.808733] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7> [297.809168] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7> [297.809577] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7> [297.809986] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7> [297.810359] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no <7> [297.810745] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz <7> [297.811462] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [297.812169] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [297.812194] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [297.812607] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] disconnected <7> [297.812630] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [297.812642] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [297.813058] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [297.813071] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [297.813083] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [297.813467] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [297.813480] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [297.813491] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [297.813880] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [297.813892] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [297.813903] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [297.814304] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [297.814351] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [297.814369] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? no <7> [297.814378] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no <7> [297.814387] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no <7> [297.814396] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no <7> [297.814405] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no <7> [297.814701] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [297.814739] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [297.814858] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [297.814886] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [297.814966] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [297.815518] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [297.815651] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [297.815665] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [297.816101] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] disconnected <7> [297.816116] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [297.816128] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [297.816520] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [297.816533] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [297.816545] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [297.816930] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [297.816943] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [297.816954] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [297.817410] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [297.817423] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [297.817435] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [297.817823] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [297.817835] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [297.817844] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? no <7> [297.817853] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no <7> [297.817862] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no <7> [297.817870] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no <7> [297.817879] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no <7> [297.817937] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [297.817958] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [297.818080] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [297.818109] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [297.818252] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [297.820085] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7> [297.820534] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [297.820949] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [297.821379] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [297.821784] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [297.822272] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [297.823044] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9 <7> [297.823369] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9 <7> [297.823686] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9 <7> [297.824009] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0 <7> [297.824341] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0 <7> [297.824663] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2 <7> [297.824979] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21 <7> [297.825364] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000 <7> [297.825683] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE <7> [297.825998] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7> [297.826321] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7> [297.826631] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39 <7> [297.826950] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7> [297.827292] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7> [297.827617] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7> [297.827943] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7> [297.828284] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7> [297.828597] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7> [297.828919] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7> [297.829250] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7> [297.829573] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7> [297.829891] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no <7> [297.830224] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no <7> [297.830545] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7> [297.830868] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7> [297.831199] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7> [297.831524] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no <7> [297.831851] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no <7> [297.832574] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7> [297.832902] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7> [297.833244] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes <7> [297.833557] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7> [297.833879] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no <7> [297.834218] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7> [297.834545] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7> [297.834849] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no <7> [297.835175] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no <7> [297.835488] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no <7> [297.835809] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7> [297.836143] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no <7> [297.836464] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7> [297.836781] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7> [297.837117] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7> [297.837429] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7> [297.837744] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no <7> [297.837988] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes <7> [297.838225] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7> [297.838418] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7> [297.838609] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7> [297.838800] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7> [297.838992] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7> [297.839268] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403 <7> [297.839463] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001 <7> [297.839656] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3 <7> [297.839912] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007 <7> [297.840241] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000 <7> [297.840554] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000 <7> [297.840866] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24 <7> [297.841198] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8 <7> [297.841521] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7> [297.841843] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7> [297.842174] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes <6> [297.842488] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [297.842492] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [297.842496] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [297.855907] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6> [297.856907] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7> [297.857511] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [297.858398] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [297.860379] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [297.894086] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [297.894505] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [297.894873] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [297.895264] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [297.895621] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [297.895983] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [297.896523] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [297.896879] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [297.897238] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <6> [297.924178] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36 <6> [297.932465] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input37 <6> [297.946510] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input38 <7> [299.204470] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [300.099157] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD off <7> [300.100107] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [300.102160] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [300.102559] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long <7> [300.102951] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [300.103532] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [300.103599] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [300.103903] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [300.104172] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [300.104927] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [300.105513] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [300.112041] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [300.177439] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [300.203191] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [300.211237] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [300.211565] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [300.211812] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [300.212060] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [300.212316] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [300.212399] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [300.212742] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [300.213113] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [300.213743] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [300.214952] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [300.227181] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [300.227476] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [300.227705] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [300.227926] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [300.228574] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [300.352882] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [300.353298] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [300.354135] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [300.354769] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [300.355933] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [300.363244] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [300.363506] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [300.363721] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [300.363931] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [300.364171] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [300.364426] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [300.364711] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [300.364920] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [300.365263] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [300.365950] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [300.366743] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [300.367122] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [300.367475] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [300.368235] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [300.451385] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [300.452113] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [300.453252] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [300.454187] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [300.455511] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [300.456061] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [300.456671] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [300.457543] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [300.458255] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [300.491220] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [300.510252] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:109:eDP-1] removing connector from sysfs <7> [300.516561] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:117:DP-1] removing connector from sysfs <7> [300.522627] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:126:HDMI-A-1] removing connector from sysfs <7> [300.531871] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:132:DP-2] removing connector from sysfs <7> [300.536887] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:138:HDMI-A-2] removing connector from sysfs <7> [300.571427] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (30 ms remaining) <7> [300.603223] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [300.613154] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [301.050788] [IGT] Reloading i915 as normal <5> [301.920395] Setting dangerous option force_probe - tainting kernel <6> [301.933258] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0 <7> [301.934974] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K <7> [301.935428] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [301.935700] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH <7> [301.936015] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [301.936588] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [301.937306] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [301.937674] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [301.939134] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [301.939519] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [301.939846] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [301.940216] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [301.940236] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [301.941411] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [301.941469] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [301.941876] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [301.942354] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7716 MiB [mem 0x00000000-0x1e24e6fff], io: n/a <7> [301.942690] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a <7> [301.943700] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018 <7> [301.944179] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [301.944581] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [301.945020] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [301.945432] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [301.956001] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [301.956315] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [301.956580] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [301.956844] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [301.957151] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [301.957580] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [301.958020] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no <7> [301.958448] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [301.958873] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [301.959318] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no <7> [301.959748] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes <7> [301.960187] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no <7> [301.960615] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3 <7> [301.961064] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [301.961478] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0 <7> [301.961888] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7> [301.963016] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [301.963455] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203 <7> [301.963877] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [301.964310] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [301.964729] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [301.965157] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [301.965580] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 848) <7> [301.966032] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [301.966468] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [301.966904] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [301.967354] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [301.967787] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136) <7> [301.968217] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [301.968636] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [301.969070] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [301.969502] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [301.969933] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [301.970375] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [301.970792] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [301.971223] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [301.971648] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [301.972083] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [301.972503] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [301.972927] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [301.973379] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [301.973835] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [301.974387] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [301.974847] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [301.975296] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [301.975725] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [301.976162] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [301.976586] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [301.977145] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [301.977576] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [301.978025] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [301.978472] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [301.979019] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [301.979450] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [301.979883] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [301.980328] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [301.981679] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <7> [301.983241] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [301.983708] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [301.984143] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [301.984573] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <6> [301.985430] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [301.985750] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [301.986422] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [301.986773] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [301.987220] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7> [301.987622] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec) <7> [301.987997] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec) <7> [301.988287] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec) <7> [301.988565] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec) <7> [301.988845] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec) <7> [301.989130] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec) <7> [301.989457] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec) <7> [301.989725] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec) <7> [301.990065] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec) <7> [301.990366] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec) <7> [301.990634] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec) <7> [301.990935] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec) <7> [301.991247] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec) <7> [301.991555] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec) <7> [301.991823] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec) <7> [301.996390] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available. <7> [302.002334] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [302.002825] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI A/PHY A] Using AUX CH A (VBT) <7> [302.003556] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:108:DDI A/PHY A] <7> [302.014062] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [302.014367] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [302.014630] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [302.014908] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [302.017028] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [302.017457] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [302.017864] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP <7> [302.018427] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [302.018832] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0 <7> [302.019263] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0 <7> [302.020138] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:108:DDI A/PHY A] initial power sequencer: PPS 0 <7> [302.020570] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [302.020982] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [302.021337] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [302.021689] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [302.022072] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [302.022365] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [302.023123] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on <7> [302.023409] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [302.023700] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [302.034121] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [302.034438] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [302.034694] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [302.245016] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [302.245789] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [302.248248] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00 <7> [302.252011] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [302.267316] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [302.267354] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [302.267377] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [302.267770] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [302.268920] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [302.270177] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:109:eDP-1] DRRS type: static <7> [302.271792] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:109:eDP-1] Using native PCH PWM for backlight control <7> [302.273378] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:109:eDP-1] backlight initialized, disabled, brightness 0/937 <7> [302.275799] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [302.277412] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [302.279052] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [302.280635] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [302.282232] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [302.283907] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [302.287314] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:116:DDI B/PHY B] Using AUX CH B (VBT) <7> [302.291759] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:116:DDI B/PHY B] <7> [302.303265] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [302.305169] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:116:DDI B/PHY B] <7> [302.306893] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:116:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [302.318113] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:131:DDI C/PHY C] Using AUX CH C (VBT) <7> [302.320868] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:131:DDI C/PHY C] <7> [302.324793] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [302.326760] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:131:DDI C/PHY C] <7> [302.328430] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:131:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [302.333398] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] hw state readout: disabled <7> [302.336076] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] hw state readout: disabled <7> [302.338787] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] hw state readout: disabled <7> [302.340699] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [302.342354] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] hw state readout: disabled, pipe A <7> [302.343560] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] hw state readout: disabled, pipe A <7> [302.344798] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] hw state readout: disabled, pipe B <7> [302.346071] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] hw state readout: disabled, pipe B <7> [302.347257] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] hw state readout: disabled, pipe B <7> [302.348469] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] hw state readout: disabled, pipe C <7> [302.349656] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] hw state readout: disabled, pipe C <7> [302.350805] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] hw state readout: disabled, pipe C <7> [302.351694] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI A/PHY A] hw state readout: disabled, pipe A <7> [302.352585] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:116:DDI B/PHY B] hw state readout: disabled, pipe A <7> [302.353379] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DP-MST A] hw state readout: disabled, pipe A <7> [302.354174] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST B] hw state readout: disabled, pipe B <7> [302.354929] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST C] hw state readout: disabled, pipe C <7> [302.355827] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:131:DDI C/PHY C] hw state readout: disabled, pipe A <7> [302.356630] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DP-MST A] hw state readout: disabled, pipe A <7> [302.357438] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST B] hw state readout: disabled, pipe B <7> [302.358215] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST C] hw state readout: disabled, pipe C <7> [302.359104] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [302.359977] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [302.360649] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [302.361369] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [302.362235] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:eDP-1] hw state readout: disabled <7> [302.363015] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:117:DP-1] hw state readout: disabled <7> [302.363749] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:126:HDMI-A-1] hw state readout: disabled <7> [302.364531] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:132:DP-2] hw state readout: disabled <7> [302.365289] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:138:HDMI-A-2] hw state readout: disabled <7> [302.365885] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [302.366518] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] min_cdclk 0 kHz <7> [302.367131] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] min_cdclk 0 kHz <7> [302.367733] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] min_cdclk 0 kHz <7> [302.368386] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] min_cdclk 0 kHz <7> [302.368977] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] min_cdclk 0 kHz <7> [302.369475] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] min_cdclk 0 kHz <7> [302.369995] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] min_cdclk 0 kHz <7> [302.370485] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] min_cdclk 0 kHz <7> [302.371009] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] min_cdclk 0 kHz <7> [302.371505] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] min_cdclk 0 kHz <7> [302.372028] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] min_cdclk 0 kHz <7> [302.372526] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:57:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [302.372939] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:82:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [302.373488] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:107:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [302.374367] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [setup_hw_state] <7> [302.374871] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [setup_hw_state] <7> [302.375398] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [setup_hw_state] <7> [302.375895] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [302.376511] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [302.376930] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [302.377404] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [302.377916] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7> [302.381038] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [302.381511] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [302.381937] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0 <7> [302.411201] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [302.411613] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [302.412002] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [302.412356] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [302.414968] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 0: start 0x8 <7> [302.415425] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 1: start 0x108 <7> [302.415851] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 2: start 0x208 <7> [302.416306] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 3: start 0x308 <7> [302.416734] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 4: start 0x3c8 <7> [302.417175] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 0: start 0x8 <7> [302.417598] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 1: start 0x108 <7> [302.418051] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 2: start 0x208 <7> [302.418476] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 3: start 0x308 <7> [302.418901] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 4: start 0x3c8 <7> [302.419350] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 0: start 0x8 <7> [302.419777] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 1: start 0x108 <7> [302.420230] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 2: start 0x208 <7> [302.420658] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 3: start 0x308 <7> [302.421109] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 4: start 0x3c8 <7> [302.422170] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [fastset] <7> [302.422607] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [fastset] <7> [302.423050] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [fastset] <7> [302.423781] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [302.424732] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:82:pipe B] <7> [302.425452] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:107:pipe C] <7> [302.426143] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [302.433961] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:109:eDP-1] adding connector to sysfs <7> [302.436546] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:109:eDP-1] backlight device intel_backlight registered <7> [302.437111] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:109:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [302.438174] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [302.441053] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:eDP-1] generating connector hotplug event <7> [302.442440] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:117:DP-1] adding connector to sysfs <7> [302.444136] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [302.446350] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:117:DP-1] generating connector hotplug event <7> [302.446481] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:126:HDMI-A-1] adding connector to sysfs <7> [302.447971] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:126:HDMI-A-1] generating connector hotplug event <7> [302.448235] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:132:DP-2] adding connector to sysfs <7> [302.449910] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [302.452539] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:132:DP-2] generating connector hotplug event <7> [302.452667] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:138:HDMI-A-2] adding connector to sysfs <7> [302.454018] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:138:HDMI-A-2] generating connector hotplug event <6> [302.454155] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7> [302.459612] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [302.493380] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [302.503206] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input39 <7> [302.506024] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [302.510972] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [302.512438] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:57:pipe A] not active, skipping <7> [302.512878] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:82:pipe B] not active, skipping <7> [302.513313] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:107:pipe C] not active, skipping <7> [302.513709] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config <7> [302.515684] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:117:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [302.516164] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [302.517857] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [302.518318] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [302.518894] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [302.519576] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [302.519589] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [302.520165] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [302.521627] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [302.522650] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [302.523439] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [302.523450] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [302.523834] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:126:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [302.525185] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [302.529608] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:132:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [302.530144] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [302.530894] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [302.531346] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [302.533995] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [302.534463] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [302.534475] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [302.534877] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [302.538512] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [302.538526] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [302.539177] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:138:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [302.540079] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [302.540088] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [302.540097] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [302.540741] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [302.541204] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [302.541603] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [302.542059] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [302.542071] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [302.542080] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [302.542119] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no <7> [302.542519] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [302.542912] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [302.545098] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] status updated from unknown to connected <7> [302.545135] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [302.545522] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes: <7> [302.545533] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [302.545545] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [302.545559] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [302.545570] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [302.550182] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [302.550202] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [302.550215] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [302.551799] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [302.552243] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [302.552815] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [302.553741] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [302.553754] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [302.554166] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [302.557534] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [302.557547] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [302.558096] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [302.558112] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [302.558123] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [302.562620] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [302.562637] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [302.562649] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [302.563350] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [302.563740] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [302.564344] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [302.564765] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [302.564775] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [302.565207] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [302.568569] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [302.568583] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [302.569037] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [302.569052] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? yes <7> [302.569061] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no <7> [302.569070] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no <7> [302.569077] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no <7> [302.569085] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no <7> [302.569147] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [302.569182] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] found preferred mode: 3200x1800 <7> [302.569191] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [302.569221] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:57:pipe A] desired mode 3200x1800 set (0,0) <7> [302.569352] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [302.569408] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] no BIOS fb, allocating a new one <7> [302.576163] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 3200x1800 fb: 0x00180000 <6> [302.577671] fbcon: i915drmfb (fb0) is primary device <6> [302.578865] Console: switching to colour frame buffer device 200x56 <6> [302.578882] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7> [302.578897] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9 <7> [302.579353] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0 <7> [302.579768] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7> [302.580193] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no <7> [302.580567] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no <7> [302.580982] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7> [302.581384] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7> [302.581792] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no <7> [302.582213] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7> [302.582620] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7> [302.583057] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7> [302.583464] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7> [302.583872] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7> [302.584297] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7> [302.584710] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7> [302.585135] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes <7> [302.585451] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [302.585472] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [302.585548] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7> [302.585979] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7> [302.586387] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7> [302.586792] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7> [302.587067] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [302.587093] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [302.587227] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no <7> [302.587639] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz <7> [302.588374] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [302.588796] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [302.589263] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [302.590185] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [302.590200] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [302.590218] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [302.590285] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no <7> [302.590703] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [302.591161] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [302.594196] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes: <7> [302.594221] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [302.594235] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [302.594249] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [302.594262] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [302.598859] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [302.598881] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [302.598894] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [302.600570] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [302.601024] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [302.601623] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [302.603484] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [302.603498] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [302.603916] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [302.607602] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [302.607617] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [302.608585] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [302.608604] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [302.608617] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [302.613476] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [302.613498] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [302.613510] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [302.616052] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [302.616467] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [302.617240] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [302.617682] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [302.617695] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [302.618297] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [302.620040] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7> [302.622548] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [302.622564] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [302.623072] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [302.623087] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? yes <7> [302.623098] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no <7> [302.623107] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no <7> [302.623117] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no <7> [302.623125] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no <7> [302.623508] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [302.623563] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] found preferred mode: 3200x1800 <7> [302.623574] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [302.623651] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:57:pipe A] desired mode 3200x1800 set (0,0) <7> [302.625771] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:109:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [302.626332] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:108:DDI A/PHY A][CRTC:57:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [302.626366] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [302.626753] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000 <7> [302.626773] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [302.627195] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [302.627615] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:108:DDI A/PHY A] [CRTC:57:pipe A] <7> [302.628020] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [302.628048] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [302.628441] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [302.628476] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [302.628862] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [302.628908] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [302.629377] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [302.629812] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [302.629989] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9 <7> [302.630315] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9 <7> [302.630293] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [302.630630] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9 <7> [302.630724] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [302.630982] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0 <7> [302.631184] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [302.631300] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0 <7> [302.631621] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2 <7> [302.631614] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [302.631970] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21 <7> [302.632083] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [302.632291] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000 <7> [302.632514] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [302.632611] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE <7> [302.632930] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7> [302.632971] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [302.633275] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7> [302.633402] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [302.633590] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39 <7> [302.633833] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [302.633901] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7> [302.634310] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7> [302.634286] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [302.634623] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7> [302.634717] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [302.634966] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7> [302.635157] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [302.635284] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7> [302.635599] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7> [302.635589] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [302.635912] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7> [302.636035] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [302.636257] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7> [302.636463] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [302.636577] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7> [302.636894] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no <7> [302.636897] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [302.637256] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no <7> [302.637333] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [302.637572] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7> [302.637761] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [302.637892] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7> [302.638202] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [302.638273] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7> [302.638581] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no <7> [302.638635] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [302.638899] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no <7> [302.639072] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [302.639271] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7> [302.639500] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [302.639573] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7> [302.639892] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes <7> [302.639932] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [302.640250] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7> [302.640372] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [302.640575] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no <7> [302.640803] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [302.640904] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7> [302.641249] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7> [302.641268] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [302.641567] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no <7> [302.641701] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [302.641889] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no <7> [302.642142] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [302.642238] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no <7> [302.642548] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7> [302.642575] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [302.642867] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no <7> [302.643030] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [302.643232] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7> [302.643464] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dpll_hw_state <7> [302.643555] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7> [302.643875] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7> [302.643892] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [302.644239] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7> [302.644339] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 <7> [302.644554] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no <7> [302.644768] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [302.644877] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes <7> [302.645249] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7> [302.645209] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [302.645578] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7> [302.645636] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [302.645898] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7> [302.646083] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [302.646235] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7> [302.646554] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7> [302.646512] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [302.646873] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403 <7> [302.646963] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [302.647217] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001 <7> [302.647395] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset <7> [302.647526] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3 <7> [302.647843] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007 <7> [302.647969] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [302.648180] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000 <7> [302.648426] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [302.648487] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000 <7> [302.648804] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24 <7> [302.648845] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [302.649138] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8 <7> [302.649289] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [302.649443] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7> [302.649706] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [302.649766] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7> [302.650133] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes <7> [302.650136] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <6> [302.650450] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [302.650454] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [302.650457] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [302.650561] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [302.654058] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [302.654513] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [302.654889] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [302.655280] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [302.655650] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [302.656042] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:57:pipe A] allocated DPLL 0 <7> [302.656421] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:57:pipe A] reserving DPLL 0 <7> [302.656807] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: yes [modeset] <7> [302.657198] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [302.657572] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [302.657959] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [302.658330] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [302.658700] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [302.659124] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [302.659496] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [302.659878] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [302.660276] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [302.660646] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [302.661049] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [302.661422] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [302.661789] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [302.662189] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [302.662560] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [302.662931] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [302.663318] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [302.663686] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [302.664073] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [302.664445] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [302.664813] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [302.665193] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [302.665564] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [302.665955] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [302.666324] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [302.666700] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [302.667100] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [302.667477] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [302.667852] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [302.668253] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [302.668631] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [302.669029] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [302.669402] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [302.669773] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [302.670168] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [302.670540] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [302.670916] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [302.671309] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [302.671678] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [302.672070] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [302.672449] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [302.672824] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [302.673226] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [302.673602] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:110] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [302.674002] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [302.674379] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [302.674755] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [302.675140] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [302.677229] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [302.678419] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A] <7> [302.678815] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B] <7> [302.679199] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A] <7> [302.679568] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B] <7> [302.679952] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C] <7> [302.680314] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C] <7> [302.680680] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A] <6> [302.680982] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7> [302.681060] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B] <7> [302.681427] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C] <7> [302.682641] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:57:pipe A] <7> [302.683062] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [302.683749] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power on <7> [302.684290] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [302.684694] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [302.695181] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [302.695597] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power on <7> [302.696047] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000000b <7> [302.898011] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [302.899206] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [302.900920] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [302.905054] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [302.906026] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [302.909216] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [302.910719] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [302.912161] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [302.917164] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Clock recovery OK <7> [302.918291] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [302.919421] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [302.924541] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [302.926284] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [302.928106] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [302.933176] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [302.934382] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [302.937455] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [302.941437] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [302.943121] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [302.945378] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 37 <7> [302.951003] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 410 us, max time under evasion is 250 us <7> [302.958228] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [302.966483] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1] <7> [302.968400] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [302.971243] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <6> [302.979903] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7> [302.981047] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [302.982810] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [302.982857] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [302.983481] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [302.983183] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [302.983539] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [302.990132] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [302.993108] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [302.994691] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [302.995874] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [302.996272] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [303.004308] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [303.004364] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [303.004402] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [303.004546] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no <7> [303.006263] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [303.007733] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [303.020269] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes: <7> [303.020306] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [303.020338] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [303.020371] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [303.020400] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [303.030136] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [303.030164] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [303.030181] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [303.032130] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [303.032738] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [303.033455] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [303.035143] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [303.035163] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [303.035691] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [303.039903] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [303.039925] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [303.040865] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [303.040891] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [303.040909] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [303.045827] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [303.045853] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [303.045868] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [303.047295] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [303.047761] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [303.049997] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [303.050523] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [303.050536] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [303.050901] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [303.056292] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [303.056601] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [303.056844] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [303.057112] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [303.057480] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [303.057983] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [303.057849] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [303.058009] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [303.058429] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [303.058257] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [303.058444] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? yes <7> [303.058454] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no <7> [303.058462] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no <7> [303.058470] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no <7> [303.058478] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no <7> [303.058541] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [303.058574] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] found preferred mode: 3200x1800 <7> [303.058583] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [303.058623] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [303.059013] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [303.059398] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [303.059411] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:57:pipe A] desired mode 3200x1800 set (0,0) <7> [303.059409] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [303.059638] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [303.059862] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [303.060230] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [303.060598] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [303.063193] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [303.063208] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [303.063218] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [303.063259] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no <7> [303.063633] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [303.064014] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [303.070360] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes: <7> [303.070376] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [303.070387] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [303.070546] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [303.070556] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [303.076655] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [303.076787] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [303.076798] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [303.078110] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [303.078616] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [303.079781] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [303.080318] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [303.080330] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [303.080701] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <6> [303.083074] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input40 <7> [303.085450] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [303.085474] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [303.085900] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [303.086252] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [303.086265] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <6> [303.092984] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input41 <7> [303.093386] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [303.095721] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [303.095738] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [303.096842] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [303.097249] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [303.097789] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [303.098471] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [303.098483] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [303.098856] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <6> [303.100636] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input42 <7> [303.102501] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [303.102513] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [303.103210] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [303.139202] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [303.139216] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [303.143586] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [303.146644] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [303.146659] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [303.147350] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [303.147725] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [303.148495] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [303.149021] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [303.149033] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [303.149422] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [303.155010] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [303.155026] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [303.157643] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [303.158801] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [303.158815] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [303.163329] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [303.164033] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [303.164046] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [303.164712] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [303.165137] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [303.165682] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [303.166095] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [303.166105] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [303.166468] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [303.169731] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [303.169744] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [303.170203] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [303.171040] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [303.171052] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [303.171515] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [303.171881] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [303.172269] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [303.172685] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [303.172695] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [303.172703] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [303.172739] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no <7> [303.173134] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [303.173487] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [303.174810] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes: <7> [303.174822] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [303.174833] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [303.174879] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [303.174889] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [303.179422] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [303.179472] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [303.179483] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [303.180155] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [303.180524] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [303.181057] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [303.181460] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [303.181470] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [303.181837] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [303.185115] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [303.185127] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [303.185565] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [303.185615] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [303.185626] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [303.190132] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [303.190180] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [303.190190] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [303.190855] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [303.191231] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [303.191786] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [303.192192] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [303.192202] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [303.192558] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [303.197806] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [303.197818] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [303.198289] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [303.199032] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:142] <7> [304.231653] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:57:pipe A] <7> [304.232243] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [304.233644] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [304.234524] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [304.235945] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [304.237298] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [304.238633] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [304.240068] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [304.241419] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [304.242758] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [304.244105] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [304.245498] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [304.246858] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [304.248218] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [304.249578] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [304.250955] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [304.252260] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [304.253673] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [304.254903] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [304.255807] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [304.256695] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [304.257598] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [304.258504] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [304.259393] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [304.260114] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [304.260796] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [304.261459] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [304.262106] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [304.262778] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [304.263446] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [304.264093] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [304.264759] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [304.265326] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [304.265864] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [304.266414] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [304.266905] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [304.267416] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [304.267929] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [304.268412] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [304.268905] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [304.269472] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset <7> [304.270021] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0 <7> [304.270672] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [304.271153] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [304.271556] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [304.271984] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [304.272394] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [304.272793] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [304.273230] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [304.273731] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [304.274226] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz <7> [304.274681] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [304.275107] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [304.275509] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [304.275939] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset] <7> [304.276350] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [304.276751] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [304.277116] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [304.277699] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [304.279521] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [304.326219] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [304.488332] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0 <7> [304.490203] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [304.511705] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off <7> [304.512202] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [304.513039] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time <7> [304.513730] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short <7> [304.514640] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [304.565987] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [304.566236] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [304.567145] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long <7> [304.567865] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [304.568156] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [304.572078] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [304.572496] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A] <7> [304.573412] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [304.574420] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [304.576205] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [304.579488] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A] <7> [304.581163] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B] <7> [304.582586] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A] <7> [304.584040] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B] <7> [304.585134] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C] <7> [304.586582] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C] <7> [304.588108] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A] <7> [304.589417] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B] <7> [304.590734] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C] <7> [304.592043] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1] <7> [304.594121] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [304.597683] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:82:pipe B] <7> [304.599085] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:107:pipe C] <7> [304.696638] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [304.698400] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [304.700007] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [304.701872] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [304.707312] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [304.727612] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [304.814484] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:109:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [304.815555] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:108:DDI A/PHY A][CRTC:57:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [304.816487] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000 <7> [304.818016] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [304.819520] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:108:DDI A/PHY A] [CRTC:57:pipe A] <7> [304.820815] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [304.822961] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [304.823978] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [304.825117] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [304.826018] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [304.826992] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [304.827987] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [304.828886] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [304.830324] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [304.831948] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [304.833392] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [304.834802] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [304.836147] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [304.837480] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [304.838821] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [304.840092] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [304.841157] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [304.842248] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [304.844094] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [304.845246] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [304.846134] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [304.847500] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [304.848475] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [304.849433] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [304.850570] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [304.851882] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [304.853311] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [304.854773] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [304.856212] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [304.857555] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [304.858959] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [304.860309] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [304.861696] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [304.863067] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [304.864458] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [304.865808] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [304.867189] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [304.868538] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [304.869942] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [304.871301] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset <7> [304.873067] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [304.874046] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [304.875433] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [304.876778] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [304.878169] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [304.879531] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [304.880889] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [304.882538] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [304.884088] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [304.885462] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [304.886813] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [304.888126] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [304.889440] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:57:pipe A] allocated DPLL 0 <7> [304.890761] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:57:pipe A] reserving DPLL 0 <7> [304.892119] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: yes [modeset] <7> [304.893475] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [304.894810] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [304.896134] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [304.897477] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [304.898800] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [304.900144] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [304.901479] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [304.902814] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [304.904152] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [304.905493] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [304.906813] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [304.908163] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [304.909496] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [304.910843] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [304.912179] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [304.913550] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [304.914883] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [304.916249] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [304.917606] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [304.918957] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [304.920162] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [304.921064] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [304.921948] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [304.922810] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [304.923708] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [304.924617] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [304.925526] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [304.926430] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [304.927334] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [304.928233] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [304.929078] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [304.929722] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [304.930386] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [304.931050] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [304.931698] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [304.932369] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [304.933041] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [304.933688] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [304.934355] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [304.935030] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [304.935677] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [304.936369] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [304.937032] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [304.937681] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:110] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [304.938271] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [304.938790] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [304.939333] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [304.939854] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [304.951987] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [304.960541] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [304.960982] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [304.963147] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [304.964055] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [304.964848] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [304.965893] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A] <7> [304.966288] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B] <7> [304.966664] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A] <7> [304.967058] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B] <7> [304.967437] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C] <7> [304.967799] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C] <7> [304.968178] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A] <7> [304.968537] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B] <7> [304.968913] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C] <7> [304.969548] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:57:pipe A] <7> [304.969969] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [304.970645] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power on <7> [304.971186] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (97 ms remaining) <7> [305.072075] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [305.092049] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [305.092488] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power on <7> [305.092947] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003 <7> [305.142993] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [305.144155] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long <7> [305.145092] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [305.146152] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [305.293388] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [305.295310] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [305.297074] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [305.300595] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on <7> [305.302075] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b <7> [305.313535] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [305.314749] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [305.317182] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [305.318074] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [305.318888] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [305.322363] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Clock recovery OK <7> [305.323178] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [305.323799] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [305.328622] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [305.329228] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [305.329836] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [305.334604] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [305.335135] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [305.338276] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [305.339540] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [305.340044] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [305.340759] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 37 <7> [305.355984] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [305.362719] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1] <7> [305.363282] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [305.364953] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [305.366148] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [305.370136] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [305.370814] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [305.371202] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [305.371838] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [305.372369] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [305.372384] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [305.372793] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [305.376253] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [305.376266] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [305.376675] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [305.381170] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [305.381844] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [305.382257] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [305.382795] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [305.383186] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [305.383197] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [305.383535] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [305.386831] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [305.386843] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [305.530688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [305.531648] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [305.544086] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [305.569494] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [305.569830] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [305.581994] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [305.635682] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [305.636868] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [305.647123] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [305.647564] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [305.647866] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [305.650740] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [305.651225] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [305.651643] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [305.652160] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [305.652585] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [305.653291] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [305.655112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [305.770378] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [305.771197] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [305.771648] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [305.771964] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <6> [305.775401] Console: switching to colour dummy device 80x25 <7> [305.776649] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:110] is removed <7> [305.776796] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [305.777332] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [305.777774] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [305.778210] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [305.778632] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [305.780187] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [305.789540] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [305.791163] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [305.791578] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [305.791949] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [305.792268] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [305.792579] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [305.792924] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [305.793242] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [305.793543] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [305.793875] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [305.794177] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [305.794411] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [305.794673] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [305.795002] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [305.795351] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [305.795710] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [305.796116] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [305.796482] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [305.796845] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [305.797243] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [305.797592] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [305.797950] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [305.798199] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [305.798501] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [305.798865] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [305.799273] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [305.799639] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [305.800032] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [305.800392] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [305.800744] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [305.801129] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [305.801382] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [305.801643] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [305.802082] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [305.802449] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [305.802815] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [305.803289] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [305.803647] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [305.803962] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [305.804197] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [305.804431] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset <7> [305.804663] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0 <7> [305.805089] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [305.805368] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [305.805661] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [305.805935] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [305.806284] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [305.806645] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [305.807048] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset] <7> [305.807411] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [305.807769] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [305.808148] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [305.808937] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [306.016142] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0 <7> [306.018056] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [306.025720] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off <7> [306.026197] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [306.026972] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time <7> [306.027420] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short <7> [306.028470] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [306.079217] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [306.079954] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long <7> [306.080117] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [306.080633] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [306.081212] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [306.082154] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [306.083536] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A] <7> [306.084961] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [306.086023] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [306.088346] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A] <7> [306.089486] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B] <7> [306.090462] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A] <7> [306.091460] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B] <7> [306.092433] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C] <7> [306.093405] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C] <7> [306.094388] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A] <7> [306.095354] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B] <7> [306.096330] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C] <7> [306.097301] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1] <7> [306.099314] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [306.159579] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [306.196747] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:109:eDP-1] removing connector from sysfs <7> [306.213668] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:117:DP-1] removing connector from sysfs <7> [306.219080] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:126:HDMI-A-1] removing connector from sysfs <7> [306.227340] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:132:DP-2] removing connector from sysfs <7> [306.230632] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:138:HDMI-A-2] removing connector from sysfs <7> [306.259114] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (322 ms remaining) <7> [306.584048] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [306.593948] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [307.065681] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS <6> [307.066991] [IGT] i915_pm_rpm: exiting, ret=0

<6> [292.153725] Console: switching to colour dummy device 80x25

<7> [292.158697] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [292.159575] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [292.159590] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [292.160270] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [292.160528] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [292.160819] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [292.161096] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [292.161108] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [292.161152] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [292.161193] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no

<7> [292.161480] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [292.161746] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [292.163621] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:

<7> [292.163632] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [292.163640] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [292.163751] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [292.163759] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [292.168109] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [292.168212] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [292.168220] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [292.168948] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.169221] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [292.170067] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.170423] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.170433] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.170657] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [292.173770] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.173779] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [292.174047] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [292.174176] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [292.174192] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [292.178641] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [292.178727] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [292.178734] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [292.179221] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.179554] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [292.180074] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.180472] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.180481] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.180812] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [292.183953] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.183962] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [292.184267] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [292.191552] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [292.191564] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [292.195934] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [292.196854] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [292.196867] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [292.197542] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.197870] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [292.198272] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.198545] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.198553] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.198882] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [292.202069] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.202080] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [292.202495] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [292.203465] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [292.203476] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [292.207930] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [292.208808] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [292.208820] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [292.209508] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.209862] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [292.210269] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.210519] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.210526] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.210838] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [292.214642] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.214651] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [292.214937] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [292.215651] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [292.215664] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [292.216094] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [292.216475] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [292.216809] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [292.217142] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [292.217152] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [292.217159] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [292.217194] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no

<7> [292.217483] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [292.217704] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [292.219009] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:

<7> [292.219020] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [292.219032] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [292.219074] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [292.219084] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [292.223563] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [292.223596] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [292.223604] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [292.224088] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.224367] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [292.224935] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.225358] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.225368] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.225706] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [292.228848] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.228856] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [292.229139] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [292.229181] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [292.229192] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [292.233616] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [292.233646] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [292.233654] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [292.234155] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.234504] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [292.235037] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.235443] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.235452] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.235788] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [292.238935] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.238946] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [292.239336] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [292.240080] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:143]

<7> [292.481703] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [293.284881] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:57:pipe A]

<7> [293.285548] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [293.286380] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [293.286627] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [293.286867] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [293.287125] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [293.287395] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [293.287635] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [293.287873] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [293.288145] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [293.288400] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [293.288639] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [293.288878] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [293.289138] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [293.289396] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [293.289634] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [293.289873] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [293.290129] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [293.290387] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [293.290625] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [293.290863] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [293.291117] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [293.291376] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [293.291614] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [293.291853] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [293.292091] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [293.292346] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [293.292607] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [293.292845] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [293.293094] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [293.293352] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [293.293614] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [293.293942] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [293.294205] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [293.294469] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [293.294760] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [293.295028] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [293.295291] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [293.295564] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [293.295925] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [293.296326] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset

<7> [293.296708] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0

<7> [293.297154] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [293.297550] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [293.297925] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [293.298320] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [293.298669] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [293.298914] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [293.299192] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [293.299639] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [293.300075] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz

<7> [293.300694] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [293.301074] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [293.301454] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [293.301820] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset]

<7> [293.302163] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [293.302455] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [293.302714] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [293.303172] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [293.304753] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [293.512343] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0

<7> [293.515396] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [293.526290] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off

<7> [293.527101] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [293.527964] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short

<7> [293.529792] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [293.530982] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [293.582994] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [293.583976] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long

<7> [293.584865] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [293.586596] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [293.588788] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [293.590061] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [293.591399] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [293.593654] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A]

<7> [293.596324] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [293.597774] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [293.600621] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A]

<7> [293.602042] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B]

<7> [293.603033] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A]

<7> [293.604126] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B]

<7> [293.604942] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C]

<7> [293.605795] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C]

<7> [293.606837] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A]

<7> [293.607699] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B]

<7> [293.608758] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C]

<7> [293.609637] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1]

<7> [293.611847] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [293.613885] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:82:pipe B]

<7> [293.614522] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:107:pipe C]

<7> [293.720657] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [293.722717] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [293.724459] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [293.726517] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [293.729722] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [293.752447] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [293.824964] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:109:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [293.826231] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:108:DDI A/PHY A][CRTC:57:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [293.827735] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000

<7> [293.828940] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [293.830547] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:108:DDI A/PHY A] [CRTC:57:pipe A]

<7> [293.831475] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [293.832453] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [293.833429] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [293.834581] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [293.835462] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [293.836926] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [293.837929] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [293.838869] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [293.839757] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [293.840711] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [293.841592] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [293.842503] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [293.843456] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [293.844424] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [293.845297] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [293.846283] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [293.847434] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [293.848415] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [293.849299] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [293.850222] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [293.851034] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [293.851941] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [293.852871] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [293.853884] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [293.854965] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [293.855864] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [293.857153] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [293.857996] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [293.858900] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [293.859845] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [293.861067] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [293.862411] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [293.863745] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [293.865082] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [293.866417] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [293.867569] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [293.868538] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [293.869844] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [293.871185] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [293.872537] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset

<7> [293.874075] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [293.875397] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [293.876612] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [293.877658] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [293.878541] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [293.879595] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [293.880502] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [293.881788] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [293.882807] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [293.883894] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [293.884790] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [293.886037] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [293.887034] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:57:pipe A] allocated DPLL 0

<7> [293.888162] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:57:pipe A] reserving DPLL 0

<7> [293.889026] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: yes [modeset]

<7> [293.889951] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [293.891003] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [293.891881] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [293.892918] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [293.893821] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [293.894985] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [293.895945] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [293.896901] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [293.897777] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [293.898715] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [293.899605] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [293.900507] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [293.901370] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [293.902327] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [293.903209] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [293.904304] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [293.905168] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [293.906429] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [293.907767] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [293.909129] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [293.910450] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [293.911773] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [293.912842] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [293.913790] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [293.915146] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [293.916315] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [293.917198] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [293.918044] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [293.918822] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [293.919596] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [293.920486] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [293.921368] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [293.922251] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [293.923123] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [293.923955] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [293.924764] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [293.925422] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [293.925854] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [293.926306] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [293.926810] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [293.927269] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [293.927765] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [293.928203] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [293.928704] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:110] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [293.929158] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [293.929717] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [293.930173] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [293.930667] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [293.943187] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [293.951537] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [293.951999] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [293.952417] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [293.953387] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [293.954421] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [293.955256] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A]

<7> [293.955563] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B]

<7> [293.955929] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A]

<7> [293.956317] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B]

<7> [293.956678] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C]

<7> [293.957029] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C]

<7> [293.957398] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A]

<7> [293.957709] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B]

<7> [293.957965] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C]

<7> [293.958435] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:57:pipe A]

<7> [293.958685] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [293.959246] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power on

<7> [293.959741] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (129 ms remaining)

<7> [294.096575] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [294.173281] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [294.174471] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power on

<7> [294.175591] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003

<7> [294.224969] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [294.226081] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long

<7> [294.227085] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [294.228187] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [294.384509] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [294.386013] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [294.387426] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [294.390841] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on

<7> [294.392754] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b

<7> [294.398296] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [294.399264] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [294.402491] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [294.403701] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [294.404895] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [294.409160] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Clock recovery OK

<7> [294.410757] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [294.412194] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [294.416303] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [294.417540] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [294.418544] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [294.421967] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [294.422981] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [294.425214] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [294.427935] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [294.429156] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [294.430664] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 37

<7> [294.443856] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [294.448867] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1]

<7> [294.450122] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [294.454833] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<6> [294.458464] [IGT] i915_pm_rpm: starting subtest module-reload

<7> [294.457978] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [294.463698] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [294.465583] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [294.466893] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [294.468421] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [294.470368] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [294.470408] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [294.471778] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [294.477518] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [294.477557] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [294.479143] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [294.484819] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [294.486589] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [294.487906] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [294.489394] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [294.490757] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [294.490792] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [294.492048] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [294.497611] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [294.497647] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [294.612669] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [294.613529] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [294.625953] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [294.651707] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [294.652175] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [294.664904] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [294.702869] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [294.704040] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [294.712021] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [294.712559] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [294.712994] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [294.715138] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [294.715611] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [294.716043] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [294.716756] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [294.717135] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [294.717564] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [294.719119] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [294.809906] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [294.810683] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [294.810989] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [294.811317] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [294.813176] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:110] is removed

<7> [294.813343] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [294.813891] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [294.814508] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [294.815033] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [294.815609] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [294.816515] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [294.827442] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [294.829566] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [294.830058] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [294.830627] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [294.831306] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [294.831962] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [294.832634] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [294.833324] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [294.833976] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [294.834654] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [294.835336] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [294.835996] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [294.836771] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [294.837599] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [294.838290] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [294.838946] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [294.839631] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [294.840306] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [294.840959] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [294.841625] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [294.842311] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [294.842962] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [294.843694] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [294.844362] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [294.845013] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [294.846379] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [294.847046] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [294.847725] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [294.848397] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [294.849050] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [294.849720] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [294.850386] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [294.851034] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [294.851705] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [294.852374] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [294.853022] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [294.853714] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [294.854383] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [294.855033] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [294.855706] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [294.856374] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset

<7> [294.857024] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0

<7> [294.857827] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [294.858588] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [294.859415] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [294.860087] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [294.860726] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [294.861379] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [294.862028] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset]

<7> [294.862709] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [294.863370] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [294.864017] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [294.865545] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [295.073297] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0

<7> [295.075934] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [295.097428] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off

<7> [295.098550] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [295.099671] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short

<7> [295.101140] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [295.102446] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [295.153422] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [295.154491] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long

<7> [295.155495] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [295.155822] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [295.159703] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [295.160686] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [295.162373] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A]

<7> [295.163865] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [295.165151] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [295.169269] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A]

<7> [295.171051] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B]

<7> [295.172593] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A]

<7> [295.174119] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B]

<7> [295.175512] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C]

<7> [295.176775] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C]

<7> [295.178134] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A]

<7> [295.179619] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B]

<7> [295.181128] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C]

<7> [295.182621] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1]

<7> [295.185466] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [295.261739] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [295.282702] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:109:eDP-1] removing connector from sysfs

<7> [295.290136] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:117:DP-1] removing connector from sysfs

<7> [295.295849] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:126:HDMI-A-1] removing connector from sysfs

<7> [295.308966] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:132:DP-2] removing connector from sysfs

<7> [295.309821] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:138:HDMI-A-2] removing connector from sysfs

<7> [295.336358] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (321 ms remaining)

<7> [295.664458] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [295.675265] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<5> [297.228686] Setting dangerous option force_probe - tainting kernel

<6> [297.241025] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0

<7> [297.243381] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K

<7> [297.243777] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [297.244099] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH

<7> [297.244385] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [297.244702] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [297.245196] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [297.245557] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [297.246909] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [297.247194] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [297.247411] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [297.247625] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [297.247636] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [297.248377] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [297.248419] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [297.248682] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [297.248992] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7716 MiB [mem 0x00000000-0x1e24e6fff], io: n/a

<7> [297.249219] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a

<7> [297.249936] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018

<7> [297.250295] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [297.250599] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [297.250863] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [297.251156] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [297.260085] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [297.260384] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [297.260648] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [297.260911] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [297.261263] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [297.261597] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [297.261876] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no

<7> [297.262232] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [297.262632] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [297.263024] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no

<7> [297.263321] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes

<7> [297.263650] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no

<7> [297.263927] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3

<7> [297.264313] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [297.264648] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0

<7> [297.264932] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0

<7> [297.265797] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [297.266141] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203

<7> [297.266423] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [297.266702] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [297.267021] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [297.267445] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [297.267843] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 848)

<7> [297.268254] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [297.268670] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [297.269108] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [297.269531] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [297.269941] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136)

<7> [297.270346] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [297.270753] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [297.271182] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [297.271602] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [297.272023] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [297.272437] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [297.272820] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [297.273222] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [297.273594] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [297.273970] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [297.274403] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [297.274803] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [297.275247] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [297.275664] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [297.276187] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [297.276615] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [297.277009] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [297.277429] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [297.277813] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [297.278218] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [297.278728] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [297.279135] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [297.279510] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [297.279830] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [297.280310] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [297.280653] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [297.280922] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [297.281265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [297.282181] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<7> [297.283357] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [297.283662] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [297.283937] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [297.284317] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [297.284806] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<6> [297.285620] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [297.285559] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [297.286015] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [297.286359] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided

<7> [297.286675] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec)

<7> [297.286942] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec)

<7> [297.287227] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec)

<7> [297.287591] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec)

<7> [297.287892] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec)

<7> [297.288202] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec)

<7> [297.288536] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec)

<7> [297.288804] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec)

<7> [297.289114] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec)

<7> [297.289431] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec)

<7> [297.289698] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec)

<7> [297.289964] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec)

<7> [297.290267] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec)

<7> [297.290653] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec)

<7> [297.290936] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec)

<7> [297.296008] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available.

<7> [297.300288] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [297.300780] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI A/PHY A] Using AUX CH A (VBT)

<7> [297.301305] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:108:DDI A/PHY A]

<7> [297.308060] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [297.308504] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [297.308904] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [297.309460] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [297.309927] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [297.310351] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [297.310757] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP

<7> [297.311328] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [297.311739] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0

<7> [297.312185] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0

<7> [297.312830] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:108:DDI A/PHY A] initial power sequencer: PPS 0

<7> [297.313290] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [297.313673] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [297.314079] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [297.314465] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [297.314844] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [297.315283] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [297.315901] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on

<7> [297.316233] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [297.316587] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [297.327090] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [297.327411] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [297.327664] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [297.532363] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [297.533366] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [297.535424] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00

<7> [297.539922] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [297.559694] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [297.559747] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [297.559778] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [297.560557] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [297.562452] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [297.564279] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:109:eDP-1] DRRS type: static

<7> [297.567161] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:109:eDP-1] Using native PCH PWM for backlight control

<7> [297.569386] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:109:eDP-1] backlight initialized, disabled, brightness 0/937

<7> [297.572166] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [297.574317] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [297.575915] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [297.577788] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [297.579368] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [297.581292] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [297.585579] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:116:DDI B/PHY B] Using AUX CH B (VBT)

<7> [297.588288] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:116:DDI B/PHY B]

<7> [297.595835] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [297.598369] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:116:DDI B/PHY B]

<7> [297.600636] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:116:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [297.605882] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:131:DDI C/PHY C] Using AUX CH C (VBT)

<7> [297.608499] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:131:DDI C/PHY C]

<7> [297.614078] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [297.616658] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:131:DDI C/PHY C]

<7> [297.618961] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:131:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [297.623725] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] hw state readout: disabled

<7> [297.625735] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] hw state readout: disabled

<7> [297.627731] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] hw state readout: disabled

<7> [297.629261] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A

<7> [297.630359] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] hw state readout: disabled, pipe A

<7> [297.631012] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] hw state readout: disabled, pipe A

<7> [297.631803] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] hw state readout: disabled, pipe B

<7> [297.632500] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] hw state readout: disabled, pipe B

<7> [297.633263] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] hw state readout: disabled, pipe B

<7> [297.633918] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] hw state readout: disabled, pipe C

<7> [297.634758] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] hw state readout: disabled, pipe C

<7> [297.635462] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] hw state readout: disabled, pipe C

<7> [297.636375] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [297.637387] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:116:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [297.638305] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DP-MST A] hw state readout: disabled, pipe A

<7> [297.639203] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST B] hw state readout: disabled, pipe B

<7> [297.639773] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST C] hw state readout: disabled, pipe C

<7> [297.640310] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:131:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [297.640985] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DP-MST A] hw state readout: disabled, pipe A

<7> [297.641692] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST B] hw state readout: disabled, pipe B

<7> [297.642388] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST C] hw state readout: disabled, pipe C

<7> [297.643165] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [297.643829] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [297.644386] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [297.645163] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [297.646125] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:eDP-1] hw state readout: disabled

<7> [297.646947] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:117:DP-1] hw state readout: disabled

<7> [297.647796] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:126:HDMI-A-1] hw state readout: disabled

<7> [297.648397] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:132:DP-2] hw state readout: disabled

<7> [297.648834] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:138:HDMI-A-2] hw state readout: disabled

<7> [297.649321] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz

<7> [297.649876] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] min_cdclk 0 kHz

<7> [297.650455] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] min_cdclk 0 kHz

<7> [297.651003] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] min_cdclk 0 kHz

<7> [297.651573] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] min_cdclk 0 kHz

<7> [297.652018] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] min_cdclk 0 kHz

<7> [297.652426] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] min_cdclk 0 kHz

<7> [297.652964] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] min_cdclk 0 kHz

<7> [297.653537] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] min_cdclk 0 kHz

<7> [297.654099] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] min_cdclk 0 kHz

<7> [297.654647] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] min_cdclk 0 kHz

<7> [297.655204] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] min_cdclk 0 kHz

<7> [297.655623] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:57:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [297.656080] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:82:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [297.656625] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:107:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [297.657500] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [setup_hw_state]

<7> [297.657965] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [setup_hw_state]

<7> [297.658377] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [setup_hw_state]

<7> [297.658700] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [297.659188] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [297.659582] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [297.659993] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [297.660470] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global

<7> [297.663409] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [297.663891] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [297.664238] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0

<7> [297.685834] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [297.686111] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [297.686316] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [297.686518] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [297.686722] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 0: start 0x8

<7> [297.686990] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 1: start 0x108

<7> [297.687301] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 2: start 0x208

<7> [297.687695] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 3: start 0x308

<7> [297.688111] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 4: start 0x3c8

<7> [297.688507] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 0: start 0x8

<7> [297.688895] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 1: start 0x108

<7> [297.689296] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 2: start 0x208

<7> [297.689609] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 3: start 0x308

<7> [297.689874] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 4: start 0x3c8

<7> [297.690262] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 0: start 0x8

<7> [297.690645] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 1: start 0x108

<7> [297.690910] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 2: start 0x208

<7> [297.691191] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 3: start 0x308

<7> [297.691489] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 4: start 0x3c8

<7> [297.692209] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [fastset]

<7> [297.692618] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [fastset]

<7> [297.693016] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [fastset]

<7> [297.693741] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [297.694466] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:82:pipe B]

<7> [297.694893] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:107:pipe C]

<7> [297.695515] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [297.702744] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:109:eDP-1] adding connector to sysfs

<7> [297.704375] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:109:eDP-1] backlight device intel_backlight registered

<7> [297.704871] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:109:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [297.705921] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [297.708337] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:eDP-1] generating connector hotplug event

<7> [297.708490] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:117:DP-1] adding connector to sysfs

<7> [297.710060] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [297.714625] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:117:DP-1] generating connector hotplug event

<7> [297.714892] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:126:HDMI-A-1] adding connector to sysfs

<7> [297.719324] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:126:HDMI-A-1] generating connector hotplug event

<7> [297.719494] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:132:DP-2] adding connector to sysfs

<7> [297.721156] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [297.724009] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:132:DP-2] generating connector hotplug event

<7> [297.724190] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:138:HDMI-A-2] adding connector to sysfs

<7> [297.725932] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:138:HDMI-A-2] generating connector hotplug event

<6> [297.726106] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0

<7> [297.732800] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [297.768617] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [297.779974] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input35

<7> [297.781902] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [297.786732] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [297.787411] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:117:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [297.787840] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [297.788305] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:126:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [297.788722] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [297.789117] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:132:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [297.789935] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:57:pipe A] not active, skipping

<7> [297.790352] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:82:pipe B] not active, skipping

<7> [297.790749] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:107:pipe C] not active, skipping

<7> [297.791160] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config

<7> [297.791567] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [297.791953] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:138:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [297.792384] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [297.794199] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [297.795223] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [297.795385] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [297.795400] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [297.795815] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] status updated from unknown to disconnected

<7> [297.795830] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] disconnected

<7> [297.795841] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:109:eDP-1] EDID changed, epoch counter 2

<7> [297.795868] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [297.795879] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [297.796298] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [297.797484] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [297.797639] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [297.797654] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [297.798105] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [297.798119] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [297.798130] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [297.798525] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [297.798537] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [297.798548] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [297.798932] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [297.798943] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [297.798952] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? no

<7> [297.798961] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no

<7> [297.798970] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no

<7> [297.798979] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no

<7> [297.798987] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no

<7> [297.799069] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [297.799091] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [297.799206] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [297.799221] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [297.801901] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9

<7> [297.802396] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0

<7> [297.802810] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no

<7> [297.803240] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no

<7> [297.803652] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no

<7> [297.804099] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes

<7> [297.804509] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes

<7> [297.804917] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no

<7> [297.805357] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes

<7> [297.805771] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no

<7> [297.806215] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes

<7> [297.806631] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no

<7> [297.807057] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes

<7> [297.807466] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no

<7> [297.807878] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes

<7> [297.808319] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes

<7> [297.808733] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no

<7> [297.809168] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no

<7> [297.809577] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes

<7> [297.809986] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes

<7> [297.810359] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no

<7> [297.810745] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz

<7> [297.811462] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [297.812169] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [297.812194] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [297.812607] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] disconnected

<7> [297.812630] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [297.812642] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [297.813058] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [297.813071] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [297.813083] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [297.813467] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [297.813480] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [297.813491] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [297.813880] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [297.813892] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [297.813903] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [297.814304] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [297.814351] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [297.814369] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? no

<7> [297.814378] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no

<7> [297.814387] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no

<7> [297.814396] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no

<7> [297.814405] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no

<7> [297.814701] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [297.814739] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [297.814858] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [297.814886] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [297.814966] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [297.815518] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [297.815651] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [297.815665] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [297.816101] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] disconnected

<7> [297.816116] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [297.816128] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [297.816520] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [297.816533] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [297.816545] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [297.816930] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [297.816943] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [297.816954] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [297.817410] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [297.817423] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [297.817435] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [297.817823] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [297.817835] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [297.817844] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? no

<7> [297.817853] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no

<7> [297.817862] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no

<7> [297.817870] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no

<7> [297.817879] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no

<7> [297.817937] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [297.817958] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [297.818080] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [297.818109] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [297.818252] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [297.820085] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device

<7> [297.820534] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [297.820949] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [297.821379] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [297.821784] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [297.822272] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [297.823044] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9

<7> [297.823369] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9

<7> [297.823686] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9

<7> [297.824009] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0

<7> [297.824341] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0

<7> [297.824663] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2

<7> [297.824979] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21

<7> [297.825364] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000

<7> [297.825683] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE

<7> [297.825998] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48

<7> [297.826321] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2

<7> [297.826631] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39

<7> [297.826950] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no

<7> [297.827292] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no

<7> [297.827617] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no

<7> [297.827943] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes

<7> [297.828284] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no

<7> [297.828597] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no

<7> [297.828919] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes

<7> [297.829250] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes

<7> [297.829573] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no

<7> [297.829891] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no

<7> [297.830224] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no

<7> [297.830545] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes

<7> [297.830868] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no

<7> [297.831199] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no

<7> [297.831524] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no

<7> [297.831851] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no

<7> [297.832574] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no

<7> [297.832902] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no

<7> [297.833244] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes

<7> [297.833557] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes

<7> [297.833879] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no

<7> [297.834218] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no

<7> [297.834545] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no

<7> [297.834849] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no

<7> [297.835175] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no

<7> [297.835488] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no

<7> [297.835809] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no

<7> [297.836143] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no

<7> [297.836464] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes

<7> [297.836781] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no

<7> [297.837117] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes

<7> [297.837429] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes

<7> [297.837744] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no

<7> [297.837988] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes

<7> [297.838225] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no

<7> [297.838418] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no

<7> [297.838609] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no

<7> [297.838800] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no

<7> [297.838992] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled

<7> [297.839268] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403

<7> [297.839463] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001

<7> [297.839656] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3

<7> [297.839912] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007

<7> [297.840241] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000

<7> [297.840554] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000

<7> [297.840866] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24

<7> [297.841198] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8

<7> [297.841521] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no

<7> [297.841843] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no

<7> [297.842174] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes

<6> [297.842488] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [297.842492] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [297.842496] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [297.855907] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4

<6> [297.856907] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])

<7> [297.857511] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [297.858398] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [297.860379] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [297.894086] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [297.894505] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [297.894873] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [297.895264] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [297.895621] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [297.895983] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [297.896523] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [297.896879] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [297.897238] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<6> [297.924178] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36

<6> [297.932465] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input37

<6> [297.946510] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input38

<7> [299.204470] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [300.099157] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD off

<7> [300.100107] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [300.102160] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [300.102559] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long

<7> [300.102951] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [300.103532] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [300.103599] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [300.103903] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [300.104172] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [300.104927] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [300.105513] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [300.112041] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [300.177439] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [300.203191] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [300.211237] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [300.211565] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [300.211812] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [300.212060] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [300.212316] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [300.212399] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [300.212742] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [300.213113] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [300.213743] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [300.214952] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [300.227181] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [300.227476] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [300.227705] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [300.227926] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [300.228574] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [300.352882] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [300.353298] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [300.354135] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [300.354769] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [300.355933] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [300.363244] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [300.363506] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [300.363721] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [300.363931] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [300.364171] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [300.364426] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [300.364711] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [300.364920] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [300.365263] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [300.365950] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [300.366743] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [300.367122] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [300.367475] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [300.368235] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [300.451385] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [300.452113] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [300.453252] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [300.454187] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [300.455511] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [300.456061] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [300.456671] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [300.457543] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [300.458255] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [300.491220] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [300.510252] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:109:eDP-1] removing connector from sysfs

<7> [300.516561] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:117:DP-1] removing connector from sysfs

<7> [300.522627] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:126:HDMI-A-1] removing connector from sysfs

<7> [300.531871] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:132:DP-2] removing connector from sysfs

<7> [300.536887] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:138:HDMI-A-2] removing connector from sysfs

<7> [300.571427] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (30 ms remaining)

<7> [300.603223] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [300.613154] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<5> [301.920395] Setting dangerous option force_probe - tainting kernel

<6> [301.933258] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0

<7> [301.934974] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K

<7> [301.935428] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [301.935700] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH

<7> [301.936015] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [301.936588] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [301.937306] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [301.937674] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [301.939134] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [301.939519] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [301.939846] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [301.940216] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [301.940236] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [301.941411] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [301.941469] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [301.941876] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [301.942354] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7716 MiB [mem 0x00000000-0x1e24e6fff], io: n/a

<7> [301.942690] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a

<7> [301.943700] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018

<7> [301.944179] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [301.944581] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [301.945020] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [301.945432] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [301.956001] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [301.956315] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [301.956580] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [301.956844] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [301.957151] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [301.957580] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [301.958020] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no

<7> [301.958448] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [301.958873] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [301.959318] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no

<7> [301.959748] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes

<7> [301.960187] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no

<7> [301.960615] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3

<7> [301.961064] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [301.961478] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0

<7> [301.961888] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0

<7> [301.963016] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [301.963455] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203

<7> [301.963877] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [301.964310] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [301.964729] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [301.965157] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [301.965580] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 848)

<7> [301.966032] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [301.966468] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [301.966904] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [301.967354] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [301.967787] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136)

<7> [301.968217] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [301.968636] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [301.969070] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [301.969502] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [301.969933] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [301.970375] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [301.970792] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [301.971223] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [301.971648] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [301.972083] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [301.972503] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [301.972927] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [301.973379] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [301.973835] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [301.974387] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [301.974847] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [301.975296] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [301.975725] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [301.976162] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [301.976586] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [301.977145] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [301.977576] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [301.978025] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [301.978472] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [301.979019] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [301.979450] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [301.979883] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [301.980328] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [301.981679] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<7> [301.983241] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [301.983708] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [301.984143] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [301.984573] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<6> [301.985430] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [301.985750] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [301.986422] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [301.986773] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [301.987220] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided

<7> [301.987622] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec)

<7> [301.987997] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec)

<7> [301.988287] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec)

<7> [301.988565] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec)

<7> [301.988845] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec)

<7> [301.989130] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec)

<7> [301.989457] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec)

<7> [301.989725] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec)

<7> [301.990065] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec)

<7> [301.990366] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec)

<7> [301.990634] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec)

<7> [301.990935] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec)

<7> [301.991247] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec)

<7> [301.991555] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec)

<7> [301.991823] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec)

<7> [301.996390] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available.

<7> [302.002334] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [302.002825] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI A/PHY A] Using AUX CH A (VBT)

<7> [302.003556] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:108:DDI A/PHY A]

<7> [302.014062] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [302.014367] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [302.014630] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [302.014908] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [302.017028] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [302.017457] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [302.017864] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP

<7> [302.018427] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [302.018832] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0

<7> [302.019263] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0

<7> [302.020138] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:108:DDI A/PHY A] initial power sequencer: PPS 0

<7> [302.020570] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [302.020982] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [302.021337] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [302.021689] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [302.022072] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [302.022365] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [302.023123] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on

<7> [302.023409] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [302.023700] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [302.034121] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [302.034438] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [302.034694] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [302.245016] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [302.245789] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [302.248248] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00

<7> [302.252011] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [302.267316] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [302.267354] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [302.267377] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [302.267770] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [302.268920] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [302.270177] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:109:eDP-1] DRRS type: static

<7> [302.271792] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:109:eDP-1] Using native PCH PWM for backlight control

<7> [302.273378] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:109:eDP-1] backlight initialized, disabled, brightness 0/937

<7> [302.275799] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [302.277412] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [302.279052] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [302.280635] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [302.282232] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [302.283907] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [302.287314] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:116:DDI B/PHY B] Using AUX CH B (VBT)

<7> [302.291759] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:116:DDI B/PHY B]

<7> [302.303265] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [302.305169] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:116:DDI B/PHY B]

<7> [302.306893] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:116:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [302.318113] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:131:DDI C/PHY C] Using AUX CH C (VBT)

<7> [302.320868] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:131:DDI C/PHY C]

<7> [302.324793] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [302.326760] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:131:DDI C/PHY C]

<7> [302.328430] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:131:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [302.333398] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] hw state readout: disabled

<7> [302.336076] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] hw state readout: disabled

<7> [302.338787] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] hw state readout: disabled

<7> [302.340699] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A

<7> [302.342354] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] hw state readout: disabled, pipe A

<7> [302.343560] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] hw state readout: disabled, pipe A

<7> [302.344798] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] hw state readout: disabled, pipe B

<7> [302.346071] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] hw state readout: disabled, pipe B

<7> [302.347257] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] hw state readout: disabled, pipe B

<7> [302.348469] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] hw state readout: disabled, pipe C

<7> [302.349656] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] hw state readout: disabled, pipe C

<7> [302.350805] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] hw state readout: disabled, pipe C

<7> [302.351694] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [302.352585] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:116:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [302.353379] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DP-MST A] hw state readout: disabled, pipe A

<7> [302.354174] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST B] hw state readout: disabled, pipe B

<7> [302.354929] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST C] hw state readout: disabled, pipe C

<7> [302.355827] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:131:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [302.356630] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DP-MST A] hw state readout: disabled, pipe A

<7> [302.357438] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST B] hw state readout: disabled, pipe B

<7> [302.358215] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST C] hw state readout: disabled, pipe C

<7> [302.359104] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [302.359977] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [302.360649] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [302.361369] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [302.362235] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:eDP-1] hw state readout: disabled

<7> [302.363015] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:117:DP-1] hw state readout: disabled

<7> [302.363749] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:126:HDMI-A-1] hw state readout: disabled

<7> [302.364531] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:132:DP-2] hw state readout: disabled

<7> [302.365289] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:138:HDMI-A-2] hw state readout: disabled

<7> [302.365885] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz

<7> [302.366518] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] min_cdclk 0 kHz

<7> [302.367131] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] min_cdclk 0 kHz

<7> [302.367733] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] min_cdclk 0 kHz

<7> [302.368386] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] min_cdclk 0 kHz

<7> [302.368977] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] min_cdclk 0 kHz

<7> [302.369475] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] min_cdclk 0 kHz

<7> [302.369995] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] min_cdclk 0 kHz

<7> [302.370485] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] min_cdclk 0 kHz

<7> [302.371009] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] min_cdclk 0 kHz

<7> [302.371505] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] min_cdclk 0 kHz

<7> [302.372028] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] min_cdclk 0 kHz

<7> [302.372526] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:57:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [302.372939] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:82:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [302.373488] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:107:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [302.374367] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [setup_hw_state]

<7> [302.374871] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [setup_hw_state]

<7> [302.375398] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [setup_hw_state]

<7> [302.375895] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [302.376511] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [302.376930] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [302.377404] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [302.377916] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global

<7> [302.381038] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [302.381511] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [302.381937] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0

<7> [302.411201] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [302.411613] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [302.412002] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [302.412356] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [302.414968] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 0: start 0x8

<7> [302.415425] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 1: start 0x108

<7> [302.415851] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 2: start 0x208

<7> [302.416306] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 3: start 0x308

<7> [302.416734] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 4: start 0x3c8

<7> [302.417175] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 0: start 0x8

<7> [302.417598] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 1: start 0x108

<7> [302.418051] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 2: start 0x208

<7> [302.418476] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 3: start 0x308

<7> [302.418901] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 4: start 0x3c8

<7> [302.419350] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 0: start 0x8

<7> [302.419777] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 1: start 0x108

<7> [302.420230] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 2: start 0x208

<7> [302.420658] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 3: start 0x308

<7> [302.421109] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 4: start 0x3c8

<7> [302.422170] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [fastset]

<7> [302.422607] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [fastset]

<7> [302.423050] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [fastset]

<7> [302.423781] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [302.424732] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:82:pipe B]

<7> [302.425452] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:107:pipe C]

<7> [302.426143] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [302.433961] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:109:eDP-1] adding connector to sysfs

<7> [302.436546] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:109:eDP-1] backlight device intel_backlight registered

<7> [302.437111] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:109:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [302.438174] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [302.441053] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:eDP-1] generating connector hotplug event

<7> [302.442440] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:117:DP-1] adding connector to sysfs

<7> [302.444136] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [302.446350] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:117:DP-1] generating connector hotplug event

<7> [302.446481] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:126:HDMI-A-1] adding connector to sysfs

<7> [302.447971] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:126:HDMI-A-1] generating connector hotplug event

<7> [302.448235] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:132:DP-2] adding connector to sysfs

<7> [302.449910] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [302.452539] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:132:DP-2] generating connector hotplug event

<7> [302.452667] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:138:HDMI-A-2] adding connector to sysfs

<7> [302.454018] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:138:HDMI-A-2] generating connector hotplug event

<6> [302.454155] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0

<7> [302.459612] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [302.493380] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [302.503206] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input39

<7> [302.506024] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [302.510972] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [302.512438] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:57:pipe A] not active, skipping

<7> [302.512878] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:82:pipe B] not active, skipping

<7> [302.513313] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:107:pipe C] not active, skipping

<7> [302.513709] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config

<7> [302.515684] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:117:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [302.516164] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [302.517857] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [302.518318] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [302.518894] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [302.519576] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [302.519589] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [302.520165] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [302.521627] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [302.522650] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [302.523439] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [302.523450] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [302.523834] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:126:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [302.525185] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [302.529608] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:132:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [302.530144] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [302.530894] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [302.531346] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [302.533995] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [302.534463] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [302.534475] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [302.534877] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [302.538512] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [302.538526] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [302.539177] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:138:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [302.540079] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [302.540088] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [302.540097] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [302.540741] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [302.541204] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [302.541603] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [302.542059] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [302.542071] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [302.542080] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [302.542119] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no

<7> [302.542519] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [302.542912] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [302.545098] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] status updated from unknown to connected

<7> [302.545135] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [302.545522] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:

<7> [302.545533] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [302.545545] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [302.545559] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [302.545570] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [302.550182] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [302.550202] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [302.550215] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [302.551799] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [302.552243] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [302.552815] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [302.553741] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [302.553754] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [302.554166] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [302.557534] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [302.557547] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [302.558096] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [302.558112] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [302.558123] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [302.562620] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [302.562637] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [302.562649] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [302.563350] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [302.563740] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [302.564344] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [302.564765] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [302.564775] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [302.565207] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [302.568569] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [302.568583] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [302.569037] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [302.569052] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? yes

<7> [302.569061] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no

<7> [302.569070] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no

<7> [302.569077] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no

<7> [302.569085] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no

<7> [302.569147] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [302.569182] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] found preferred mode: 3200x1800

<7> [302.569191] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [302.569221] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:57:pipe A] desired mode 3200x1800 set (0,0)

<7> [302.569352] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [302.569408] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] no BIOS fb, allocating a new one

<7> [302.576163] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 3200x1800 fb: 0x00180000

<6> [302.577671] fbcon: i915drmfb (fb0) is primary device

<6> [302.578865] Console: switching to colour frame buffer device 200x56

<6> [302.578882] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device

<7> [302.578897] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9

<7> [302.579353] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0

<7> [302.579768] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no

<7> [302.580193] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no

<7> [302.580567] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no

<7> [302.580982] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes

<7> [302.581384] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes

<7> [302.581792] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no

<7> [302.582213] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes

<7> [302.582620] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no

<7> [302.583057] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes

<7> [302.583464] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no

<7> [302.583872] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes

<7> [302.584297] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no

<7> [302.584710] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes

<7> [302.585135] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes

<7> [302.585451] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [302.585472] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [302.585548] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no

<7> [302.585979] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no

<7> [302.586387] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes

<7> [302.586792] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes

<7> [302.587067] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [302.587093] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [302.587227] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no

<7> [302.587639] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz

<7> [302.588374] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [302.588796] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [302.589263] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [302.590185] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [302.590200] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [302.590218] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [302.590285] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no

<7> [302.590703] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [302.591161] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [302.594196] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:

<7> [302.594221] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [302.594235] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [302.594249] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [302.594262] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [302.598859] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [302.598881] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [302.598894] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [302.600570] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [302.601024] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [302.601623] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [302.603484] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [302.603498] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [302.603916] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [302.607602] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [302.607617] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [302.608585] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [302.608604] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [302.608617] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [302.613476] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [302.613498] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [302.613510] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [302.616052] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [302.616467] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [302.617240] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [302.617682] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [302.617695] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [302.618297] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [302.620040] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device

<7> [302.622548] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [302.622564] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [302.623072] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [302.623087] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? yes

<7> [302.623098] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no

<7> [302.623107] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no

<7> [302.623117] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no

<7> [302.623125] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no

<7> [302.623508] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [302.623563] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] found preferred mode: 3200x1800

<7> [302.623574] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [302.623651] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:57:pipe A] desired mode 3200x1800 set (0,0)

<7> [302.625771] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:109:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [302.626332] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:108:DDI A/PHY A][CRTC:57:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [302.626366] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [302.626753] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000

<7> [302.626773] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [302.627195] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [302.627615] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:108:DDI A/PHY A] [CRTC:57:pipe A]

<7> [302.628020] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [302.628048] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [302.628441] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [302.628476] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [302.628862] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [302.628908] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [302.629377] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [302.629812] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [302.629989] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9

<7> [302.630315] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9

<7> [302.630293] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [302.630630] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9

<7> [302.630724] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [302.630982] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0

<7> [302.631184] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [302.631300] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0

<7> [302.631621] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2

<7> [302.631614] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [302.631970] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21

<7> [302.632083] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [302.632291] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000

<7> [302.632514] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [302.632611] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE

<7> [302.632930] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48

<7> [302.632971] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [302.633275] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2

<7> [302.633402] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [302.633590] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39

<7> [302.633833] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [302.633901] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no

<7> [302.634310] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no

<7> [302.634286] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [302.634623] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no

<7> [302.634717] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [302.634966] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes

<7> [302.635157] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [302.635284] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no

<7> [302.635599] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no

<7> [302.635589] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [302.635912] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes

<7> [302.636035] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [302.636257] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes

<7> [302.636463] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [302.636577] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no

<7> [302.636894] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no

<7> [302.636897] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [302.637256] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no

<7> [302.637333] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [302.637572] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes

<7> [302.637761] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [302.637892] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no

<7> [302.638202] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [302.638273] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no

<7> [302.638581] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no

<7> [302.638635] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [302.638899] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no

<7> [302.639072] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [302.639271] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no

<7> [302.639500] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [302.639573] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no

<7> [302.639892] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes

<7> [302.639932] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [302.640250] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes

<7> [302.640372] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [302.640575] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no

<7> [302.640803] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [302.640904] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no

<7> [302.641249] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no

<7> [302.641268] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [302.641567] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no

<7> [302.641701] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [302.641889] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no

<7> [302.642142] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [302.642238] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no

<7> [302.642548] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no

<7> [302.642575] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [302.642867] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no

<7> [302.643030] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [302.643232] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes

<7> [302.643464] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dpll_hw_state

<7> [302.643555] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no

<7> [302.643875] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes

<7> [302.643892] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [302.644239] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes

<7> [302.644339] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0

<7> [302.644554] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no

<7> [302.644768] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [302.644877] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes

<7> [302.645249] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no

<7> [302.645209] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [302.645578] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no

<7> [302.645636] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [302.645898] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no

<7> [302.646083] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [302.646235] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no

<7> [302.646554] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled

<7> [302.646512] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [302.646873] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403

<7> [302.646963] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [302.647217] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001

<7> [302.647395] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset

<7> [302.647526] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3

<7> [302.647843] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007

<7> [302.647969] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [302.648180] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000

<7> [302.648426] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [302.648487] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000

<7> [302.648804] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24

<7> [302.648845] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [302.649138] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8

<7> [302.649289] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [302.649443] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no

<7> [302.649706] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [302.649766] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no

<7> [302.650133] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes

<7> [302.650136] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<6> [302.650450] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [302.650454] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [302.650457] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [302.650561] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [302.654058] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [302.654513] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [302.654889] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [302.655280] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [302.655650] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [302.656042] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:57:pipe A] allocated DPLL 0

<7> [302.656421] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:57:pipe A] reserving DPLL 0

<7> [302.656807] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: yes [modeset]

<7> [302.657198] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [302.657572] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [302.657959] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [302.658330] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [302.658700] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [302.659124] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [302.659496] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [302.659878] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [302.660276] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [302.660646] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [302.661049] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [302.661422] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [302.661789] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [302.662189] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [302.662560] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [302.662931] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [302.663318] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [302.663686] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [302.664073] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [302.664445] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [302.664813] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [302.665193] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [302.665564] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [302.665955] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [302.666324] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [302.666700] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [302.667100] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [302.667477] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [302.667852] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [302.668253] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [302.668631] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [302.669029] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [302.669402] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [302.669773] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [302.670168] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [302.670540] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [302.670916] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [302.671309] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [302.671678] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [302.672070] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [302.672449] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [302.672824] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [302.673226] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [302.673602] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:110] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [302.674002] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [302.674379] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [302.674755] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [302.675140] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [302.677229] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [302.678419] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A]

<7> [302.678815] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B]

<7> [302.679199] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A]

<7> [302.679568] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B]

<7> [302.679952] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C]

<7> [302.680314] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C]

<7> [302.680680] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A]

<6> [302.680982] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4

<7> [302.681060] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B]

<7> [302.681427] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C]

<7> [302.682641] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:57:pipe A]

<7> [302.683062] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [302.683749] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power on

<7> [302.684290] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [302.684694] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [302.695181] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [302.695597] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power on

<7> [302.696047] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000000b

<7> [302.898011] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [302.899206] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [302.900920] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [302.905054] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [302.906026] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [302.909216] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [302.910719] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [302.912161] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [302.917164] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Clock recovery OK

<7> [302.918291] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [302.919421] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [302.924541] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [302.926284] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [302.928106] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [302.933176] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [302.934382] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [302.937455] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [302.941437] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [302.943121] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [302.945378] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 37

<7> [302.951003] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 410 us, max time under evasion is 250 us

<7> [302.958228] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [302.966483] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1]

<7> [302.968400] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [302.971243] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp

<6> [302.979903] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])

<7> [302.981047] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [302.982810] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [302.982857] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [302.983481] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [302.983183] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [302.983539] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [302.990132] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [302.993108] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [302.994691] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [302.995874] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [302.996272] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [303.004308] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [303.004364] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [303.004402] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [303.004546] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no

<7> [303.006263] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [303.007733] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [303.020269] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:

<7> [303.020306] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [303.020338] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [303.020371] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [303.020400] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [303.030136] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [303.030164] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [303.030181] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [303.032130] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [303.032738] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [303.033455] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [303.035143] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [303.035163] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [303.035691] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [303.039903] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [303.039925] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [303.040865] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [303.040891] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [303.040909] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [303.045827] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [303.045853] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [303.045868] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [303.047295] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [303.047761] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [303.049997] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [303.050523] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [303.050536] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [303.050901] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [303.056292] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [303.056601] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [303.056844] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [303.057112] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [303.057480] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [303.057983] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [303.057849] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [303.058009] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [303.058429] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [303.058257] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [303.058444] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? yes

<7> [303.058454] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no

<7> [303.058462] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no

<7> [303.058470] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no

<7> [303.058478] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no

<7> [303.058541] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [303.058574] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] found preferred mode: 3200x1800

<7> [303.058583] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [303.058623] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [303.059013] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [303.059398] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [303.059411] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:57:pipe A] desired mode 3200x1800 set (0,0)

<7> [303.059409] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [303.059638] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [303.059862] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [303.060230] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [303.060598] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [303.063193] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [303.063208] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [303.063218] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [303.063259] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no

<7> [303.063633] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [303.064014] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [303.070360] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:

<7> [303.070376] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [303.070387] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [303.070546] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [303.070556] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [303.076655] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [303.076787] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [303.076798] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [303.078110] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [303.078616] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [303.079781] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [303.080318] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [303.080330] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [303.080701] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<6> [303.083074] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input40

<7> [303.085450] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [303.085474] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [303.085900] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [303.086252] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [303.086265] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<6> [303.092984] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input41

<7> [303.093386] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [303.095721] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [303.095738] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [303.096842] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [303.097249] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [303.097789] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [303.098471] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [303.098483] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [303.098856] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<6> [303.100636] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input42

<7> [303.102501] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [303.102513] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [303.103210] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [303.139202] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [303.139216] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [303.143586] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [303.146644] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [303.146659] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [303.147350] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [303.147725] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [303.148495] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [303.149021] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [303.149033] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [303.149422] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [303.155010] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [303.155026] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [303.157643] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [303.158801] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [303.158815] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [303.163329] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [303.164033] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [303.164046] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [303.164712] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [303.165137] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [303.165682] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [303.166095] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [303.166105] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [303.166468] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [303.169731] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [303.169744] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [303.170203] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [303.171040] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [303.171052] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [303.171515] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [303.171881] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [303.172269] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [303.172685] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [303.172695] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [303.172703] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [303.172739] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no

<7> [303.173134] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [303.173487] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [303.174810] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:

<7> [303.174822] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [303.174833] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [303.174879] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [303.174889] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [303.179422] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [303.179472] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [303.179483] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [303.180155] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [303.180524] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [303.181057] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [303.181460] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [303.181470] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [303.181837] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [303.185115] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [303.185127] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [303.185565] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [303.185615] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [303.185626] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [303.190132] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [303.190180] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [303.190190] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [303.190855] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [303.191231] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [303.191786] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [303.192192] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [303.192202] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [303.192558] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [303.197806] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [303.197818] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [303.198289] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [303.199032] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:142]

<7> [304.231653] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:57:pipe A]

<7> [304.232243] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [304.233644] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [304.234524] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [304.235945] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [304.237298] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [304.238633] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [304.240068] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [304.241419] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [304.242758] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [304.244105] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [304.245498] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [304.246858] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [304.248218] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [304.249578] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [304.250955] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [304.252260] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [304.253673] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [304.254903] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [304.255807] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [304.256695] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [304.257598] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [304.258504] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [304.259393] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [304.260114] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [304.260796] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [304.261459] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [304.262106] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [304.262778] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [304.263446] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [304.264093] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [304.264759] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [304.265326] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [304.265864] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [304.266414] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [304.266905] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [304.267416] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [304.267929] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [304.268412] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [304.268905] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [304.269472] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset

<7> [304.270021] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0

<7> [304.270672] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [304.271153] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [304.271556] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [304.271984] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [304.272394] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [304.272793] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [304.273230] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [304.273731] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [304.274226] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz

<7> [304.274681] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [304.275107] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [304.275509] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [304.275939] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset]

<7> [304.276350] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [304.276751] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [304.277116] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [304.277699] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [304.279521] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [304.326219] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [304.488332] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0

<7> [304.490203] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [304.511705] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off

<7> [304.512202] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [304.513039] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [304.513730] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short

<7> [304.514640] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [304.565987] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [304.566236] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [304.567145] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long

<7> [304.567865] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [304.568156] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [304.572078] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [304.572496] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A]

<7> [304.573412] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [304.574420] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [304.576205] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [304.579488] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A]

<7> [304.581163] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B]

<7> [304.582586] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A]

<7> [304.584040] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B]

<7> [304.585134] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C]

<7> [304.586582] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C]

<7> [304.588108] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A]

<7> [304.589417] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B]

<7> [304.590734] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C]

<7> [304.592043] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1]

<7> [304.594121] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [304.597683] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:82:pipe B]

<7> [304.599085] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:107:pipe C]

<7> [304.696638] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [304.698400] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [304.700007] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [304.701872] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [304.707312] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [304.727612] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [304.814484] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:109:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [304.815555] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:108:DDI A/PHY A][CRTC:57:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [304.816487] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000

<7> [304.818016] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [304.819520] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:108:DDI A/PHY A] [CRTC:57:pipe A]

<7> [304.820815] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [304.822961] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [304.823978] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [304.825117] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [304.826018] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [304.826992] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [304.827987] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [304.828886] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [304.830324] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [304.831948] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [304.833392] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [304.834802] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [304.836147] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [304.837480] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [304.838821] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [304.840092] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [304.841157] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [304.842248] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [304.844094] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [304.845246] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [304.846134] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [304.847500] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [304.848475] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [304.849433] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [304.850570] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [304.851882] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [304.853311] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [304.854773] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [304.856212] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [304.857555] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [304.858959] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [304.860309] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [304.861696] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [304.863067] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [304.864458] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [304.865808] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [304.867189] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [304.868538] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [304.869942] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [304.871301] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset

<7> [304.873067] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [304.874046] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [304.875433] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [304.876778] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [304.878169] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [304.879531] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [304.880889] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [304.882538] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [304.884088] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [304.885462] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [304.886813] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [304.888126] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [304.889440] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:57:pipe A] allocated DPLL 0

<7> [304.890761] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:57:pipe A] reserving DPLL 0

<7> [304.892119] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: yes [modeset]

<7> [304.893475] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [304.894810] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [304.896134] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [304.897477] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [304.898800] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [304.900144] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [304.901479] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [304.902814] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [304.904152] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [304.905493] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [304.906813] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [304.908163] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [304.909496] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [304.910843] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [304.912179] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [304.913550] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [304.914883] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [304.916249] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [304.917606] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [304.918957] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [304.920162] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [304.921064] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [304.921948] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [304.922810] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [304.923708] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [304.924617] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [304.925526] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [304.926430] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [304.927334] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [304.928233] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [304.929078] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [304.929722] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [304.930386] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [304.931050] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [304.931698] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [304.932369] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [304.933041] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [304.933688] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [304.934355] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [304.935030] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [304.935677] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [304.936369] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [304.937032] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [304.937681] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:110] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [304.938271] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [304.938790] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [304.939333] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [304.939854] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [304.951987] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [304.960541] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [304.960982] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [304.963147] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [304.964055] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [304.964848] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [304.965893] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A]

<7> [304.966288] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B]

<7> [304.966664] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A]

<7> [304.967058] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B]

<7> [304.967437] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C]

<7> [304.967799] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C]

<7> [304.968178] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A]

<7> [304.968537] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B]

<7> [304.968913] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C]

<7> [304.969548] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:57:pipe A]

<7> [304.969969] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [304.970645] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power on

<7> [304.971186] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (97 ms remaining)

<7> [305.072075] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [305.092049] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [305.092488] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power on

<7> [305.092947] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003

<7> [305.142993] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [305.144155] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long

<7> [305.145092] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [305.146152] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [305.293388] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [305.295310] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [305.297074] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [305.300595] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on

<7> [305.302075] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b

<7> [305.313535] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [305.314749] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [305.317182] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [305.318074] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [305.318888] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [305.322363] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Clock recovery OK

<7> [305.323178] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [305.323799] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [305.328622] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [305.329228] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [305.329836] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [305.334604] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [305.335135] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [305.338276] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [305.339540] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [305.340044] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [305.340759] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 37

<7> [305.355984] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [305.362719] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1]

<7> [305.363282] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [305.364953] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [305.366148] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [305.370136] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [305.370814] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [305.371202] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [305.371838] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [305.372369] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [305.372384] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [305.372793] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [305.376253] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [305.376266] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [305.376675] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [305.381170] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [305.381844] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [305.382257] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [305.382795] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [305.383186] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [305.383197] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [305.383535] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [305.386831] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [305.386843] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [305.530688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [305.531648] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [305.544086] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [305.569494] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [305.569830] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [305.581994] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [305.635682] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [305.636868] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [305.647123] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [305.647564] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [305.647866] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [305.650740] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [305.651225] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [305.651643] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [305.652160] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [305.652585] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [305.653291] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [305.655112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [305.770378] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [305.771197] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [305.771648] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [305.771964] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<6> [305.775401] Console: switching to colour dummy device 80x25

<7> [305.776649] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:110] is removed

<7> [305.776796] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [305.777332] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [305.777774] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [305.778210] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [305.778632] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [305.780187] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [305.789540] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [305.791163] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [305.791578] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [305.791949] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [305.792268] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [305.792579] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [305.792924] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [305.793242] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [305.793543] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [305.793875] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [305.794177] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [305.794411] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [305.794673] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [305.795002] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [305.795351] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [305.795710] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [305.796116] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [305.796482] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [305.796845] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [305.797243] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [305.797592] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [305.797950] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [305.798199] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [305.798501] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [305.798865] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [305.799273] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [305.799639] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [305.800032] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [305.800392] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [305.800744] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [305.801129] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [305.801382] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [305.801643] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [305.802082] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [305.802449] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [305.802815] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [305.803289] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [305.803647] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [305.803962] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [305.804197] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [305.804431] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset

<7> [305.804663] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0

<7> [305.805089] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [305.805368] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [305.805661] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [305.805935] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [305.806284] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [305.806645] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [305.807048] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset]

<7> [305.807411] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [305.807769] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [305.808148] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [305.808937] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [306.016142] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0

<7> [306.018056] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [306.025720] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off

<7> [306.026197] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [306.026972] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [306.027420] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short

<7> [306.028470] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [306.079217] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [306.079954] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long

<7> [306.080117] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [306.080633] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [306.081212] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [306.082154] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [306.083536] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A]

<7> [306.084961] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [306.086023] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [306.088346] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A]

<7> [306.089486] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B]

<7> [306.090462] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A]

<7> [306.091460] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B]

<7> [306.092433] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C]

<7> [306.093405] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C]

<7> [306.094388] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A]

<7> [306.095354] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B]

<7> [306.096330] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C]

<7> [306.097301] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1]

<7> [306.099314] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [306.159579] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [306.196747] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:109:eDP-1] removing connector from sysfs

<7> [306.213668] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:117:DP-1] removing connector from sysfs

<7> [306.219080] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:126:HDMI-A-1] removing connector from sysfs

<7> [306.227340] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:132:DP-2] removing connector from sysfs

<7> [306.230632] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:138:HDMI-A-2] removing connector from sysfs

<7> [306.259114] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (322 ms remaining)

<7> [306.584048] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [306.593948] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<6> [307.065681] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS

<6> [307.066991] [IGT] i915_pm_rpm: exiting, ret=0

Results for igt@i915_pm_rpm@module-reload