Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.02 seconds
Igt-Version 
IGT-Version: 2.3-gf7b9a7230 (x86_64) (Linux: 6.19.0-rc2-CI_DRM_17733-gcab246648fd8+ x86_64)
Out 
Using IGT_SRANDOM=1766498151 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.022s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.022s)
Dmesg
<6> [244.164969] Console: switching to colour dummy device 80x25
<6> [244.165848] [IGT] kms_force_connector_basic: executing
<7> [244.375738] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [244.376612] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [244.377352] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [244.378611] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:75:VGA-1] force updated from 0 to 0 or reprobing
<7> [244.378627] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [244.378641] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [244.379040] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [244.379440] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [244.380040] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [244.380332] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [244.380769] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [244.381030] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [244.381038] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [244.381295] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [244.382661] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [244.382670] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [244.382929] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [244.383188] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<7> [244.383269] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [244.383277] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [244.383582] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [244.383869] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [244.384304] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [244.384729] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [244.385249] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [244.385657] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [244.385668] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [244.386058] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [244.387766] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [244.387777] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [244.388151] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [244.388687] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<7> [244.388854] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [244.388864] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [244.389246] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [244.389669] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [244.390252] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [244.390671] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [244.391232] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [244.391646] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [244.391656] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [244.392048] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [244.393501] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [244.393509] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [244.393767] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [244.394025] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<6> [244.394996] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [244.395533] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:75:VGA-1] force updated from 0 to 2 or reprobing
<7> [244.395550] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [244.395559] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] status updated from disconnected to connected
<7> [244.395584] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [244.395676] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [244.395904] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [244.396268] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [244.396740] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [244.397040] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [244.397059] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [244.397316] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [244.398705] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [244.398722] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [244.399066] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] probed modes:
<7> [244.399074] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [244.399080] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [244.399086] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [244.399092] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [244.399098] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [244.399166] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [244.399384] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [244.399745] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [244.400166] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [244.400441] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [244.400464] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [244.400780] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [244.402113] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [244.402131] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [244.402552] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] probed modes:
<7> [244.402564] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [244.402575] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [244.402585] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [244.402596] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [244.402605] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [244.402917] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:75:VGA-1] EDID override set
<7> [244.402954] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [244.403009] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:75:VGA-1] ELD monitor IGT
<7> [244.403014] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:75:VGA-1] ELD size 24, SAD count 0
<7> [244.403190] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [244.403203] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [244.403213] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] probed modes:
<7> [244.403218] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [244.403224] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [244.403230] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [244.403235] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [244.403241] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [244.403246] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [244.403564] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:75:VGA-1] EDID override set
<7> [244.403629] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [244.403706] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:75:VGA-1] ELD monitor IGT
<7> [244.403715] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:75:VGA-1] ELD size 24, SAD count 0
<7> [244.403723] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:75:VGA-1] EDID changed, epoch counter 56
<7> [244.403933] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [244.403945] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] probed modes:
<7> [244.403950] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [244.403956] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [244.403962] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [244.403967] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [244.403972] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [244.404141] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:75:VGA-1] EDID override reset
<7> [244.404178] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [244.404366] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [244.404713] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [244.405226] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [244.405517] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [244.405540] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [244.405860] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [244.407231] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [244.407250] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [244.407721] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [244.407737] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [244.407748] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] probed modes:
<7> [244.407755] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [244.407761] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [244.407767] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [244.407772] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [244.407778] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [244.408102] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:75:VGA-1] force updated from 2 to 0 or reprobing
<7> [244.408111] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [244.408118] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [244.408398] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [244.408700] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [244.409173] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [244.409452] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [244.409895] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [244.410149] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [244.410155] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [244.410433] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [244.411862] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [244.411871] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [244.412128] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [244.412385] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] status updated from connected to disconnected
<7> [244.412401] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<7> [244.412425] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [244.412983] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [244.413373] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:75:VGA-1] EDID changed, epoch counter 58
<7> [244.413520] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [244.413531] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [244.413835] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [244.414093] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [244.414514] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [244.414794] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [244.415208] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [244.415498] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [244.415508] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [244.415796] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [244.417074] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [244.417082] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [244.417341] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [244.417662] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<6> [244.418559] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [244.419169] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [244.419940] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:71:LVDS-1] force updated from 0 to 0 or reprobing
<7> [244.419952] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1]
<7> [244.419966] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD monitor
<7> [244.419973] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD size 20, SAD count 0
<7> [244.420062] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1] probed modes:
<7> [244.420068] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [244.420108] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1]
<7> [244.420117] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD monitor
<7> [244.420121] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD size 20, SAD count 0
<7> [244.420190] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1] probed modes:
<7> [244.420195] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [244.420356] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:71:LVDS-1] EDID override reset
<7> [244.420386] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1]
<7> [244.420394] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD monitor
<7> [244.420399] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD size 20, SAD count 0
<7> [244.420558] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1] probed modes:
<7> [244.420564] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [244.420818] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:75:VGA-1] force updated from 0 to 0 or reprobing
<7> [244.420826] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [244.420832] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [244.421133] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [244.421392] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [244.421935] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [244.422199] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [244.422666] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [244.422929] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [244.422937] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [244.423195] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [244.424698] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [244.424707] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [244.424982] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [244.425319] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<7> [244.425403] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [244.425459] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [244.425755] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [244.426012] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [244.426499] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [244.426772] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [244.427189] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [244.427494] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [244.427504] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [244.427780] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [244.429048] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [244.429055] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [244.429309] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [244.429669] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<7> [244.429873] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:75:VGA-1] EDID override reset
<7> [244.429907] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [244.429914] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [244.430183] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [244.430473] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [244.430934] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [244.431185] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [244.431634] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [244.431891] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [244.431897] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [244.432152] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [244.433451] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [244.433458] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [244.433712] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [244.433968] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<7> [244.434264] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:78:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [244.434273] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1]
<7> [244.434280] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:78:HDMI-A-1]
<7> [244.486024] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [244.502481] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [244.502501] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [244.502762] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [244.518466] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [244.518476] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [244.518740] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1] disconnected
<7> [244.518820] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1]
<7> [244.518828] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:78:HDMI-A-1]
<7> [244.570469] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [244.586470] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [244.586482] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [244.586742] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [244.602477] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [244.602488] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [244.602757] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1] disconnected
<7> [244.602971] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:78:HDMI-A-1] EDID override reset
<7> [244.603004] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1]
<7> [244.603011] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:78:HDMI-A-1]
<7> [244.655077] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [244.671489] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [244.671501] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [244.671784] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [244.687475] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [244.687484] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [244.687739] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1] disconnected
<7> [244.687993] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:86:DP-1] EDID override reset
<7> [244.688028] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:86:DP-1]
<7> [244.688036] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:86:DP-1]
<7> [244.692340] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:86:DP-1] disconnected
<7> [244.692772] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:91:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [244.692784] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2]
<7> [244.692793] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:91:HDMI-A-2]
<7> [244.693297] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [244.693807] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [244.694459] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [244.694916] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [244.694929] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [244.695380] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [244.697219] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [244.697233] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [244.697680] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2] disconnected
<7> [244.697791] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2]
<7> [244.697804] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:91:HDMI-A-2]
<7> [244.698462] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [244.698890] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [244.699443] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [244.699854] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [244.699865] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [244.700245] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [244.701863] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [244.701875] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [244.702263] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2] disconnected
<7> [244.702630] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:91:HDMI-A-2] EDID override reset
<7> [244.702684] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2]
<7> [244.702695] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:91:HDMI-A-2]
<7> [244.703278] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [244.703592] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [244.704006] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [244.704262] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [244.704269] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [244.704536] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [244.705864] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [244.705872] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [244.706132] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2] disconnected
<7> [244.706483] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:95:HDMI-A-3] force updated from 0 to 0 or reprobing
<7> [244.706496] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3]
<7> [244.706507] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-3]
<7> [244.706965] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [244.707218] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [244.707684] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [244.707942] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [244.707948] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [244.708198] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [244.709594] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [244.709602] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [244.709865] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3] disconnected
<7> [244.709933] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3]
<7> [244.709941] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-3]
<7> [244.710367] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [244.710653] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [244.711099] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [244.711351] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [244.711357] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [244.711651] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [244.712929] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [244.712936] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [244.713194] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3] disconnected
<7> [244.713390] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:95:HDMI-A-3] EDID override reset
<7> [244.713483] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3]
<7> [244.713495] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-3]
<7> [244.713943] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [244.714195] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [244.714653] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [244.714908] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [244.714914] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [244.715162] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [244.716494] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [244.716501] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [244.716761] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3] disconnected
<7> [244.716960] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:99:DP-2] EDID override reset
<7> [244.716992] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:99:DP-2]
<7> [244.716999] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:99:DP-2]
<7> [244.721296] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:99:DP-2] disconnected
<7> [244.721566] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:103:DP-3] EDID override reset
<7> [244.721613] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-3]
<7> [244.721621] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-3]
<7> [244.725951] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-3] disconnected
<6> [244.728591] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [244.729220] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [244.737080] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [244.737107] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [244.737312] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1]
<7> [244.737344] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD monitor
<7> [244.737359] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD size 20, SAD count 0
<7> [244.737597] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1] probed modes:
<7> [244.737607] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [244.737619] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [244.737629] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [244.738314] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [244.739144] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [244.740288] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [244.740586] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [244.741021] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [244.741276] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [244.741284] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [244.741600] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [244.742924] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [244.742932] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [244.743186] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [244.743558] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<7> [244.743570] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1]
<7> [244.743577] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:78:HDMI-A-1]
<7> [244.795479] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [244.811500] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [244.811514] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [244.811793] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [244.827508] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [244.827518] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [244.827775] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1] disconnected
<7> [244.827786] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:86:DP-1]
<7> [244.827794] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:86:DP-1]
<7> [244.832052] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:86:DP-1] disconnected
<7> [244.832069] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2]
<7> [244.832080] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:91:HDMI-A-2]
<7> [244.832723] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [244.833076] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [244.833622] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [244.833968] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [244.833977] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [244.834318] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [244.835822] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [244.835830] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [244.836090] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2] disconnected
<7> [244.836100] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3]
<7> [244.836107] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-3]
<7> [244.836538] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [244.836793] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [244.837238] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [244.837681] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [244.837692] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [244.838086] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [244.839900] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [244.839910] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [244.840302] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3] disconnected
<7> [244.840317] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:99:DP-2]
<7> [244.840328] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:99:DP-2]
<7> [244.844845] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:99:DP-2] disconnected
<7> [244.844858] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-3]
<7> [244.844865] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-3]
<7> [244.849170] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-3] disconnected
<7> [244.849190] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:71:LVDS-1] enabled? yes
<7> [244.849197] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:75:VGA-1] enabled? no
<7> [244.849202] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:78:HDMI-A-1] enabled? no
<7> [244.849207] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:86:DP-1] enabled? no
<7> [244.849212] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:91:HDMI-A-2] enabled? no
<7> [244.849217] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:95:HDMI-A-3] enabled? no
<7> [244.849222] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:99:DP-2] enabled? no
<7> [244.849226] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:103:DP-3] enabled? no
<7> [244.849261] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [244.849284] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:71:LVDS-1] found preferred mode: 1366x768
<7> [244.849290] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1366x768 config
<7> [244.849318] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:51:pipe A] desired mode 1366x768 set (0,0)
<7> [244.853202] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [244.870713] Console: switching to colour frame buffer device 170x48
Created at 2025-12-24 18:40:16