<5>[ 0.000000] Linux version 6.19.0-rc1-CI_DRM_17704-g31985bb0a701+ (kbuild2@gfx-ci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Thu Dec 18 10:58:30 UTC 2025 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] Hygon HygonGenuine <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] zhaoxin Shanghai <6>[ 0.000000] x86/tme: not enabled by BIOS <4>[ 0.000000] x86/CPU: Running old microcode <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000060a3efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000060a3f000-0x0000000063db6fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000063db7000-0x0000000063edbfff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x0000000063edc000-0x0000000063ffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x0000000063fff000-0x0000000063ffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000064000000-0x00000000787fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000000ffffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x63ffe000 ACPI 2.0=0x63ffe014 TPMFinalLog=0x63e11000 SMBIOS=0x60b16000 MEMATTR=0x5bd8b018 ESRT=0x5bd9b918 MOKvar=0x60c4b000 TPMEventLog=0x63f0e018 <6>[ 0.000000] efi: Remove mem304: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem306: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.6 present. <6>[ 0.000000] DMI: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024 <6>[ 0.000000] DMI: Memory slots populated: 8/8 <6>[ 0.000000] tsc: Detected 3400.000 MHz processor <6>[ 0.000000] tsc: Detected 3379.200 MHz TSC <7>[ 0.000011] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000012] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000016] last_pfn = 0x880000 max_arch_pfn = 0x400000000 <6>[ 0.000020] MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs <6>[ 0.000021] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.000604] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000606] last_pfn = 0x64000 max_arch_pfn = 0x400000000 <6>[ 0.005046] esrt: Reserving ESRT space from 0x000000005bd9b918 to 0x000000005bd9ba40. <7>[ 0.005057] e820: update [mem 0x5bd9b000-0x5bd9bfff] usable ==> reserved <6>[ 0.005085] Using GB pages for direct mapping <6>[ 0.005824] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes <6>[ 0.005827] printk: early log buf free: 258704(98%) <6>[ 0.005828] Secure boot disabled <6>[ 0.005830] ACPI: Early table checksum verification disabled <6>[ 0.005835] ACPI: RSDP 0x0000000063FFE014 000024 (v02 INTEL ) <6>[ 0.005840] ACPI: XSDT 0x0000000063F15228 000184 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005845] ACPI: FACP 0x0000000063FDC000 000114 (v06 INTEL MTL 00000002 01000013) <6>[ 0.005849] ACPI: DSDT 0x0000000063F55000 083F8A (v02 INTEL MTL 00000002 01000013) <6>[ 0.005851] ACPI: FACS 0x0000000063DF7000 000040 <6>[ 0.005852] ACPI: SSDT 0x0000000063FFC000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.005854] ACPI: SSDT 0x0000000063FFB000 00070D (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.005857] ACPI: SSDT 0x0000000063FFA000 0005E4 (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.005859] ACPI: SSDT 0x0000000063FF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.005861] ACPI: SSDT 0x0000000063FF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.005863] ACPI: SSDT 0x0000000063FF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.005865] ACPI: SSDT 0x0000000063FF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.005867] ACPI: SSDT 0x0000000063FF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.005869] ACPI: SSDT 0x0000000063FF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.005871] ACPI: SSDT 0x0000000063FED000 003BC8 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.005873] ACPI: DTPR 0x0000000063FEC000 000098 (v01 00000000 00000000) <6>[ 0.005876] ACPI: SSDT 0x0000000063FEB000 000D03 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.005878] ACPI: SSDT 0x0000000063FE8000 002494 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.005880] ACPI: SSDT 0x0000000063FDE000 009AB7 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.005882] ACPI: SSDT 0x0000000063FDD000 0000F9 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.005884] ACPI: HPET 0x0000000063FDB000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005886] ACPI: APIC 0x0000000063FDA000 000358 (v05 INTEL MTL 00000002 01000013) <6>[ 0.005888] ACPI: MCFG 0x0000000063FD9000 00003C (v01 INTEL MTL 00000002 01000013) <6>[ 0.005891] ACPI: SSDT 0x0000000063F45000 00FCEF (v02 INTEL MtlP_Rvp 00001000 INTL 20210930) <6>[ 0.005893] ACPI: SSDT 0x0000000063F43000 00147F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.005894] ACPI: SSDT 0x0000000063F3E000 00389C (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.005896] ACPI: SSDT 0x0000000063F38000 00535A (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.005898] ACPI: SSDT 0x0000000063FFD000 00060E (v02 INTEL Tpm2Tabl 00001000 INTL 20210930) <6>[ 0.005901] ACPI: TPM2 0x0000000063F37000 00004C (v04 INTEL MTL 00000002 01000013) <6>[ 0.005902] ACPI: LPIT 0x0000000063F36000 0000CC (v01 INTEL MTL 00000002 01000013) <6>[ 0.005904] ACPI: WSMT 0x0000000063F35000 000028 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005905] ACPI: SSDT 0x0000000063F34000 000CA6 (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.005907] ACPI: SSDT 0x0000000063F2E000 00587D (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.005909] ACPI: DBGP 0x0000000063F2D000 000034 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005911] ACPI: DBG2 0x0000000063F2C000 000054 (v00 INTEL MTL 00000002 01000013) <6>[ 0.005913] ACPI: NHLT 0x0000000063F2B000 00098B (v00 INTEL MTL 00000002 01000013) <6>[ 0.005916] ACPI: SSDT 0x0000000063F29000 001191 (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.005917] ACPI: SSDT 0x0000000063F23000 005CAE (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.005919] ACPI: ECDT 0x0000000063F22000 000069 (v01 MTL 00000002 01000013) <6>[ 0.005921] ACPI: DMAR 0x0000000063F21000 0000A8 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005923] ACPI: FPDT 0x0000000063F20000 000044 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005926] ACPI: SSDT 0x0000000063F1E000 001015 (v02 INTEL xh_mtlp3 00000000 INTL 20210930) <6>[ 0.005928] ACPI: SSDT 0x0000000063F1B000 00281A (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.005930] ACPI: SSDT 0x0000000063F18000 0028D3 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.005932] ACPI: SSDT 0x0000000063F16000 0011A0 (v02 INTEL St00Ssdt 00001000 INTL 20210930) <6>[ 0.005934] ACPI: ASF! 0x0000000063F42000 000074 (v32 INTEL MTL 00000002 01000013) <6>[ 0.005936] ACPI: PHAT 0x0000000063F14000 000810 (v01 INTEL MTL 00000005 MSFT 0100000D) <6>[ 0.005938] ACPI: BGRT 0x0000000063F13000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005940] ACPI: Reserving FACP table memory at [mem 0x63fdc000-0x63fdc113] <6>[ 0.005941] ACPI: Reserving DSDT table memory at [mem 0x63f55000-0x63fd8f89] <6>[ 0.005942] ACPI: Reserving FACS table memory at [mem 0x63df7000-0x63df703f] <6>[ 0.005943] ACPI: Reserving SSDT table memory at [mem 0x63ffc000-0x63ffc38b] <6>[ 0.005943] ACPI: Reserving SSDT table memory at [mem 0x63ffb000-0x63ffb70c] <6>[ 0.005944] ACPI: Reserving SSDT table memory at [mem 0x63ffa000-0x63ffa5e3] <6>[ 0.005945] ACPI: Reserving SSDT table memory at [mem 0x63ff9000-0x63ff91aa] <6>[ 0.005945] ACPI: Reserving SSDT table memory at [mem 0x63ff8000-0x63ff8393] <6>[ 0.005945] ACPI: Reserving SSDT table memory at [mem 0x63ff6000-0x63ff7bae] <6>[ 0.005946] ACPI: Reserving SSDT table memory at [mem 0x63ff4000-0x63ff561f] <6>[ 0.005946] ACPI: Reserving SSDT table memory at [mem 0x63ff2000-0x63ff3348] <6>[ 0.005947] ACPI: Reserving SSDT table memory at [mem 0x63ff1000-0x63ff1fba] <6>[ 0.005947] ACPI: Reserving SSDT table memory at [mem 0x63fed000-0x63ff0bc7] <6>[ 0.005948] ACPI: Reserving DTPR table memory at [mem 0x63fec000-0x63fec097] <6>[ 0.005948] ACPI: Reserving SSDT table memory at [mem 0x63feb000-0x63febd02] <6>[ 0.005949] ACPI: Reserving SSDT table memory at [mem 0x63fe8000-0x63fea493] <6>[ 0.005949] ACPI: Reserving SSDT table memory at [mem 0x63fde000-0x63fe7ab6] <6>[ 0.005950] ACPI: Reserving SSDT table memory at [mem 0x63fdd000-0x63fdd0f8] <6>[ 0.005950] ACPI: Reserving HPET table memory at [mem 0x63fdb000-0x63fdb037] <6>[ 0.005951] ACPI: Reserving APIC table memory at [mem 0x63fda000-0x63fda357] <6>[ 0.005951] ACPI: Reserving MCFG table memory at [mem 0x63fd9000-0x63fd903b] <6>[ 0.005951] ACPI: Reserving SSDT table memory at [mem 0x63f45000-0x63f54cee] <6>[ 0.005952] ACPI: Reserving SSDT table memory at [mem 0x63f43000-0x63f4447e] <6>[ 0.005953] ACPI: Reserving SSDT table memory at [mem 0x63f3e000-0x63f4189b] <6>[ 0.005953] ACPI: Reserving SSDT table memory at [mem 0x63f38000-0x63f3d359] <6>[ 0.005954] ACPI: Reserving SSDT table memory at [mem 0x63ffd000-0x63ffd60d] <6>[ 0.005955] ACPI: Reserving TPM2 table memory at [mem 0x63f37000-0x63f3704b] <6>[ 0.005955] ACPI: Reserving LPIT table memory at [mem 0x63f36000-0x63f360cb] <6>[ 0.005956] ACPI: Reserving WSMT table memory at [mem 0x63f35000-0x63f35027] <6>[ 0.005956] ACPI: Reserving SSDT table memory at [mem 0x63f34000-0x63f34ca5] <6>[ 0.005957] ACPI: Reserving SSDT table memory at [mem 0x63f2e000-0x63f3387c] <6>[ 0.005958] ACPI: Reserving DBGP table memory at [mem 0x63f2d000-0x63f2d033] <6>[ 0.005958] ACPI: Reserving DBG2 table memory at [mem 0x63f2c000-0x63f2c053] <6>[ 0.005959] ACPI: Reserving NHLT table memory at [mem 0x63f2b000-0x63f2b98a] <6>[ 0.005960] ACPI: Reserving SSDT table memory at [mem 0x63f29000-0x63f2a190] <6>[ 0.005960] ACPI: Reserving SSDT table memory at [mem 0x63f23000-0x63f28cad] <6>[ 0.005961] ACPI: Reserving ECDT table memory at [mem 0x63f22000-0x63f22068] <6>[ 0.005961] ACPI: Reserving DMAR table memory at [mem 0x63f21000-0x63f210a7] <6>[ 0.005962] ACPI: Reserving FPDT table memory at [mem 0x63f20000-0x63f20043] <6>[ 0.005962] ACPI: Reserving SSDT table memory at [mem 0x63f1e000-0x63f1f014] <6>[ 0.005963] ACPI: Reserving SSDT table memory at [mem 0x63f1b000-0x63f1d819] <6>[ 0.005964] ACPI: Reserving SSDT table memory at [mem 0x63f18000-0x63f1a8d2] <6>[ 0.005965] ACPI: Reserving SSDT table memory at [mem 0x63f16000-0x63f1719f] <6>[ 0.005965] ACPI: Reserving ASF! table memory at [mem 0x63f42000-0x63f42073] <6>[ 0.005966] ACPI: Reserving PHAT table memory at [mem 0x63f14000-0x63f1480f] <6>[ 0.005967] ACPI: Reserving BGRT table memory at [mem 0x63f13000-0x63f13037] <6>[ 0.006069] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.006280] No NUMA configuration found <6>[ 0.006281] Faking a node at [mem 0x0000000000000000-0x000000087fffffff] <6>[ 0.006289] NODE_DATA(0) allocated [mem 0x87fb52e40-0x87fb7dfff] <6>[ 0.006442] Zone ranges: <6>[ 0.006443] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.006444] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.006445] Normal [mem 0x0000000100000000-0x000000087fffffff] <6>[ 0.006446] Device empty <6>[ 0.006446] Movable zone start for each node <6>[ 0.006447] Early memory node ranges <6>[ 0.006447] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.006448] node 0: [mem 0x0000000000100000-0x0000000060a3efff] <6>[ 0.006449] node 0: [mem 0x0000000063fff000-0x0000000063ffffff] <6>[ 0.006449] node 0: [mem 0x0000000100000000-0x000000087fffffff] <6>[ 0.006451] Initmem setup node 0 [mem 0x0000000000001000-0x000000087fffffff] <6>[ 0.006457] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.006480] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.008663] On node 0, zone DMA32: 13760 pages in unavailable ranges <6>[ 0.050741] On node 0, zone Normal: 16384 pages in unavailable ranges <6>[ 0.051214] ACPI: PM-Timer IO Port: 0x1808 <4>[ 0.051220] CPU topo: Boot CPU APIC ID not the first enumerated APIC ID: 20 != 10 <4>[ 0.051220] CPU topo: [Firmware Bug]: APIC enumeration order not specification compliant <6>[ 0.051224] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.051268] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.051271] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.051272] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.051275] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.051276] ACPI: HPET id: 0x8086a201 base: 0xfed00000 <7>[ 0.051288] e820: update [mem 0x5bd45000-0x5bd5ffff] usable ==> reserved <6>[ 0.051296] TSC deadline timer available <6>[ 0.051298] CPU topo: Max. logical packages: 1 <6>[ 0.051299] CPU topo: Max. logical dies: 1 <6>[ 0.051299] CPU topo: Max. dies per package: 1 <6>[ 0.051301] CPU topo: Max. threads per core: 2 <6>[ 0.051302] CPU topo: Num. cores per package: 16 <6>[ 0.051303] CPU topo: Num. threads per package: 22 <6>[ 0.051303] CPU topo: Allowing 22 present CPUs plus 0 hotplug CPUs <6>[ 0.051323] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.051324] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.051326] PM: hibernation: Registered nosave memory: [mem 0x5bd45000-0x5bd5ffff] <6>[ 0.051327] PM: hibernation: Registered nosave memory: [mem 0x5bd9b000-0x5bd9bfff] <6>[ 0.051329] PM: hibernation: Registered nosave memory: [mem 0x60a3f000-0x63ffefff] <6>[ 0.051331] PM: hibernation: Registered nosave memory: [mem 0x64000000-0xffffffff] <6>[ 0.051333] [mem 0x78800000-0xfed1ffff] available for PCI devices <6>[ 0.051334] Booting paravirtualized kernel on bare hardware <6>[ 0.051336] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.051348] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:22 nr_cpu_ids:22 nr_node_ids:1 <6>[ 0.052805] percpu: Embedded 87 pages/cpu s233472 r8192 d114688 u524288 <7>[ 0.052810] pcpu-alloc: s233472 r8192 d114688 u524288 alloc=1*2097152 <7>[ 0.052812] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 <7>[ 0.052815] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 <7>[ 0.052817] pcpu-alloc: [0] 16 17 18 19 [0] 20 21 -- -- <5>[ 0.052842] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <7>[ 0.052958] blacklisting initcall simpledrm_platform_driver_init <5>[ 0.052979] random: crng init done <6>[ 0.055800] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.057212] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.057350] software IO TLB: area num 32. <6>[ 0.068734] Fallback order for Node 0: 0 <6>[ 0.068738] Built 1 zonelists, mobility grouping on. Total pages: 8260062 <6>[ 0.068739] Policy zone: Normal <6>[ 0.068756] mem auto-init: stack:off, heap alloc:on, heap free:off <6>[ 0.068757] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.068761] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) <6>[ 0.070197] stackdepot: allocating space for 8192 stack pools via memblock <4>[ 0.113608] ********************************************************** <4>[ 0.113608] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.113609] ** ** <4>[ 0.113609] ** This system shows unhashed kernel memory addresses ** <4>[ 0.113609] ** via the console, logs, and other interfaces. This ** <4>[ 0.113609] ** might reduce the security of your system. ** <4>[ 0.113610] ** ** <4>[ 0.113610] ** If you see this message and you are not debugging ** <4>[ 0.113610] ** the kernel, report this immediately to your system ** <4>[ 0.113610] ** administrator! ** <4>[ 0.113610] ** ** <4>[ 0.113611] ** Use hash_pointers=always to force this mode off ** <4>[ 0.113611] ** ** <4>[ 0.113611] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.113611] ********************************************************** <6>[ 0.115200] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=22, Nodes=1 <6>[ 0.125808] ftrace: allocating 61067 entries in 240 pages <6>[ 0.125810] ftrace: allocated 240 pages with 4 groups <6>[ 0.127570] Dynamic Preempt: voluntary <6>[ 0.128688] Running RCU self tests <6>[ 0.128689] Running RCU synchronous self tests <6>[ 0.128690] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.128690] rcu: RCU lockdep checking is enabled. <6>[ 0.128691] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=22. <6>[ 0.128692] Trampoline variant of Tasks RCU enabled. <6>[ 0.128692] Rude variant of Tasks RCU enabled. <6>[ 0.128692] Tracing variant of Tasks RCU enabled. <6>[ 0.128693] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.128693] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=22 <6>[ 0.128827] Running RCU synchronous self tests <6>[ 0.128836] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22. <6>[ 0.128841] RCU Tasks Rude: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22. <6>[ 0.128845] RCU Tasks Trace: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22. <6>[ 0.141421] NR_IRQS: 524544, nr_irqs: 2232, preallocated irqs: 16 <6>[ 0.141993] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.142578] Console: colour dummy device 80x25 <6>[ 0.142588] printk: legacy console [tty0] enabled <6>[ 0.143759] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <6>[ 0.143767] ... MAX_LOCKDEP_SUBCLASSES: 8 <6>[ 0.143771] ... MAX_LOCK_DEPTH: 48 <6>[ 0.143775] ... MAX_LOCKDEP_KEYS: 8192 <6>[ 0.143778] ... CLASSHASH_SIZE: 4096 <6>[ 0.143782] ... MAX_LOCKDEP_ENTRIES: 524288 <6>[ 0.143786] ... MAX_LOCKDEP_CHAINS: 524288 <6>[ 0.143790] ... CHAINHASH_SIZE: 262144 <6>[ 0.143794] memory used by lock dependency info: 54145 kB <6>[ 0.143798] memory used for stack traces: 4224 kB <6>[ 0.143802] per task-struct memory footprint: 1920 bytes <6>[ 0.143871] ACPI: Core revision 20250807 <6>[ 0.144840] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 0.144897] APIC: Switch to symmetric I/O mode setup <6>[ 0.144903] DMAR: Host address width 42 <6>[ 0.144907] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 0.144946] DMAR: dmar0: reg_base_addr fc800000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0ef5e <6>[ 0.144954] DMAR: DRHD base: 0x000000fc801000 flags: 0x1 <6>[ 0.144974] DMAR: dmar1: reg_base_addr fc801000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0efde <6>[ 0.144981] DMAR: SATC flags: 0x1 <6>[ 0.144993] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc801000 IOMMU 1 <6>[ 0.144999] DMAR-IR: HPET id 0 under DRHD base 0xfc801000 <6>[ 0.145003] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 0.146709] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 0.151071] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 0.151094] Calibrating delay loop (skipped), value calculated using timer frequency.. 6758.40 BogoMIPS (lpj=3379200) <6>[ 0.151163] CPU0: Thermal monitoring enabled (TM1) <6>[ 0.151169] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 0.151376] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 0.151381] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 0.151391] process: using mwait in idle threads <6>[ 0.151402] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto <6>[ 0.151418] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 0.151429] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 0.151436] VMSCAPE: Mitigation: IBPB before exit to userspace <6>[ 0.151443] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 0.151454] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 0.151475] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 0.151483] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 0.151491] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 0.151499] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 0.151508] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 0.151516] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' <6>[ 0.151526] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 0.151534] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 0.151542] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 0.151550] x86/fpu: xstate_offset[12]: 856, xstate_sizes[12]: 24 <6>[ 0.151558] x86/fpu: Enabled xstate features 0x1a07, context size is 880 bytes, using 'compacted' format. <6>[ 0.152087] Freeing SMP alternatives memory: 56K <6>[ 0.152087] pid_max: default: 32768 minimum: 301 <6>[ 0.152087] landlock: Up and running. <6>[ 0.152087] Yama: becoming mindful. <6>[ 0.152087] AppArmor: AppArmor initialized <6>[ 0.152087] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.152087] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.152087] Running RCU synchronous self tests <6>[ 0.152087] Running RCU synchronous self tests <6>[ 0.152087] smpboot: CPU0: Intel(R) Core(TM) Ultra 7 1003H (family: 0x6, model: 0xaa, stepping: 0x4) <6>[ 0.152087] Performance Events: XSAVE Architectural LBR, PEBS fmt5+-baseline, AnyThread deprecated, Meteorlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 0.152271] core: cpu_core PMU driver: <6>[ 0.152280] ... version: 5 <6>[ 0.152284] ... bit width: 48 <6>[ 0.152289] ... generic counters: 8 <6>[ 0.152292] ... generic bitmap: 00000000000000ff <6>[ 0.152297] ... fixed-purpose counters: 4 <6>[ 0.152301] ... fixed-purpose bitmap: 000000000000000f <6>[ 0.152306] ... value mask: 0000ffffffffffff <6>[ 0.152311] ... max period: 00007fffffffffff <6>[ 0.152315] ... global_ctrl mask: 0001000f000000ff <6>[ 0.152515] signal: max sigframe size: 3632 <6>[ 0.152547] Estimated ratio of average max frequency by base frequency (times 1024): 1445 <6>[ 0.152696] rcu: Hierarchical SRCU implementation. <6>[ 0.152701] rcu: Max phase no-delay instances is 400. <6>[ 0.152876] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level <6>[ 0.155508] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 0.156277] smp: Bringing up secondary CPUs ... <6>[ 0.156709] smpboot: x86: Booting SMP configuration: <6>[ 0.156716] .... node #0, CPUs: #1 #3 #6 #8 #10 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 <6>[ 0.009964] core: cpu_atom PMU driver: <6>[ 0.009964] ... version: 5 <6>[ 0.009964] ... bit width: 48 <6>[ 0.009964] ... generic counters: 8 <6>[ 0.009964] ... generic bitmap: 00000000000000ff <6>[ 0.009964] ... fixed-purpose counters: 3 <6>[ 0.009964] ... fixed-purpose bitmap: 0000000000000007 <6>[ 0.009964] ... value mask: 0000ffffffffffff <6>[ 0.009964] ... max period: 00007fffffffffff <6>[ 0.009964] ... global_ctrl mask: 00000007000000ff <5>[ 0.170531] #2 #4 #5 #7 #9 #11 <6>[ 0.177168] smp: Brought up 1 node, 22 CPUs <6>[ 0.177168] smpboot: Total of 22 processors activated (148684.80 BogoMIPS) <6>[ 0.180431] Memory: 32229152K/33040248K available (25566K kernel code, 5612K rwdata, 9656K rodata, 5716K init, 68180K bss, 780064K reserved, 0K cma-reserved) <6>[ 0.184362] devtmpfs: initialized <6>[ 0.184472] x86/mm: Memory block size: 128MB <6>[ 0.209944] ACPI: PM: Registering ACPI NVS region [mem 0x63db7000-0x63edbfff] (1200128 bytes) <6>[ 0.210890] Running RCU synchronous self tests <6>[ 0.210910] Running RCU synchronous self tests <6>[ 0.211119] Running RCU Tasks wait API self tests <6>[ 0.211132] Running RCU Tasks Rude wait API self tests <6>[ 0.211132] Running RCU Tasks Trace wait API self tests <6>[ 0.224112] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.224324] posixtimers hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 0.224619] futex hash table entries: 8192 (1048576 bytes on 1 NUMA nodes, total 1024 KiB, linear). <6>[ 0.225936] PM: RTC time: 14:42:23, date: 2025-12-18 <6>[ 0.226803] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.228037] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.228453] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.228873] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.228929] audit: initializing netlink subsys (disabled) <5>[ 0.228973] audit: type=2000 audit(1766068943.077:1): state=initialized audit_enabled=0 res=1 <6>[ 0.229841] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.229843] thermal_sys: Registered thermal governor 'bang_bang' <6>[ 0.229849] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.229854] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.229859] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.229906] cpuidle: using governor ladder <6>[ 0.229906] cpuidle: using governor menu <6>[ 0.230200] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 0.230699] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 0.230729] PCI: Using configuration type 1 for base access <6>[ 0.231145] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.231363] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.231363] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 0.231363] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.231363] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.235347] raid6: skipped pq benchmark and selected avx2x4 <6>[ 0.235355] raid6: using avx2x2 recovery algorithm <6>[ 0.235974] fbcon: Taking over console <6>[ 0.236173] ACPI: Added _OSI(Module Device) <6>[ 0.236178] ACPI: Added _OSI(Processor Device) <6>[ 0.236182] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 0.243101] Callback from call_rcu_tasks_trace() invoked. <6>[ 0.906890] ACPI: 28 ACPI AML tables successfully acquired and loaded <6>[ 0.918064] ACPI: EC: EC started <6>[ 0.918075] ACPI: EC: interrupt blocked <6>[ 0.920817] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 0.920822] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 0.961099] Callback from call_rcu_tasks() invoked. <6>[ 1.213977] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.213986] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.280428] ACPI: Interpreter enabled <6>[ 1.280634] ACPI: PM: (supports S0 S4 S5) <6>[ 1.280644] ACPI: Using IOAPIC for interrupt routing <6>[ 1.291792] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 1.291809] PCI: Ignoring E820 reservations for host bridge windows <6>[ 1.342089] ACPI: Enabled 10 GPEs in block 00 to 7F <6>[ 1.342089] ACPI: Enabled 8 GPEs in block 80 to DF <6>[ 1.426944] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 1.778540] ACPI: \_SB_.PC00.RP01.PXP_: New power resource <6>[ 1.811059] ACPI: \_SB_.PC00.RP06.PXP_: New power resource <6>[ 1.824824] ACPI: \_SB_.PC00.RP07.PXP_: New power resource <6>[ 1.849918] ACPI: \_SB_.PC00.RP09.PXP_: New power resource <6>[ 1.861206] ACPI: \_SB_.PC00.RP10.PXP_: New power resource <6>[ 1.874117] ACPI: \_SB_.PC00.RP11.PXP_: New power resource <6>[ 1.886131] ACPI: \_SB_.PC00.RP12.PXP_: New power resource <6>[ 2.088360] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 2.088736] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 2.089047] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 2.197802] ACPI: \_TZ_.FN00: New power resource <6>[ 2.198616] ACPI: \_TZ_.FN01: New power resource <6>[ 2.199252] ACPI: \_TZ_.FN02: New power resource <6>[ 2.199871] ACPI: \_TZ_.FN03: New power resource <6>[ 2.200500] ACPI: \_TZ_.FN04: New power resource <6>[ 2.203241] ACPI: \PIN_: New power resource <6>[ 2.206294] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 2.206312] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] <6>[ 2.208739] acpi PNP0A08:00: _OSC: platform does not support [AER] <6>[ 2.213392] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME PCIeCapability LTR DPC] <6>[ 2.227768] PCI host bridge to bus 0000:00 <6>[ 2.227807] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 2.227816] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 2.227823] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 2.227831] pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff window] <6>[ 2.227840] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x3ffbfffffff window] <6>[ 2.227850] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 2.237929] pci 0000:00:00.0: [8086:7d01] type 00 class 0x060000 conventional PCI endpoint <6>[ 2.238625] pci 0000:00:02.0: [8086:7d55] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint <6>[ 2.238660] pci 0000:00:02.0: BAR 0 [mem 0x5018000000-0x5018ffffff 64bit pref] <6>[ 2.238668] pci 0000:00:02.0: BAR 2 [mem 0x4000000000-0x400fffffff 64bit pref] <6>[ 2.238704] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics <6>[ 2.238712] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 2.238760] pci 0000:00:02.0: PME# supported from D0 D3hot <6>[ 2.238821] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x00ffffff 64bit pref] <6>[ 2.238827] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x06ffffff 64bit pref]: contains BAR 0 for 7 VFs <6>[ 2.240336] pci 0000:00:04.0: [8086:7d03] type 00 class 0x118000 conventional PCI endpoint <6>[ 2.240379] pci 0000:00:04.0: BAR 0 [mem 0x501a280000-0x501a29ffff 64bit] <6>[ 2.241873] pci 0000:00:05.0: [8086:7d19] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint <6>[ 2.241901] pci 0000:00:05.0: BAR 0 [mem 0x5019000000-0x5019ffffff 64bit] <6>[ 2.241913] pci 0000:00:05.0: enabling Extended Tags <6>[ 2.243389] pci 0000:00:06.0: [8086:7ecb] type 01 class 0x060400 PCIe Root Port <6>[ 2.243426] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 2.243437] pci 0000:00:06.0: bridge window [mem 0x8c000000-0x8c0fffff] <6>[ 2.243560] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold <6>[ 2.243638] pci 0000:00:06.0: PTM enabled (root), 4ns granularity <6>[ 2.249894] pci 0000:00:07.0: [8086:7ec6] type 01 class 0x060400 PCIe Root Port <6>[ 2.249926] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 2.249936] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff] <6>[ 2.249956] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 2.250049] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 2.250115] pci 0000:00:07.0: PTM enabled (root), 4ns granularity <6>[ 2.255430] pci 0000:00:07.3: [8086:7ec7] type 01 class 0x060400 PCIe Root Port <6>[ 2.255468] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 2.255478] pci 0000:00:07.3: bridge window [mem 0x80000000-0x85ffffff] <6>[ 2.255492] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 2.255525] pci 0000:00:07.3: PME# supported from D0 D3hot D3cold <6>[ 2.255525] pci 0000:00:07.3: PTM enabled (root), 4ns granularity <6>[ 2.263759] pci 0000:00:08.0: [8086:7e4c] type 00 class 0x088000 conventional PCI endpoint <6>[ 2.263819] pci 0000:00:08.0: BAR 0 [mem 0x501a2e3000-0x501a2e3fff 64bit] <6>[ 2.264656] pci 0000:00:0a.0: [8086:7d0d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint <6>[ 2.264695] pci 0000:00:0a.0: BAR 0 [mem 0x501a240000-0x501a27ffff 64bit] <6>[ 2.264714] pci 0000:00:0a.0: enabling Extended Tags <6>[ 2.265119] pci 0000:00:0b.0: [8086:7d1d] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint <6>[ 2.265161] pci 0000:00:0b.0: BAR 0 [mem 0x5010000000-0x5017ffffff 64bit] <6>[ 2.265175] pci 0000:00:0b.0: BAR 4 [mem 0x501a2e2000-0x501a2e2fff 64bit] <6>[ 2.266038] pci 0000:00:0d.0: [8086:7ec0] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.266120] pci 0000:00:0d.0: BAR 0 [mem 0x501a2c0000-0x501a2cffff 64bit] <6>[ 2.266234] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 2.269591] pci 0000:00:0d.3: [8086:7ec3] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.269689] pci 0000:00:0d.3: BAR 0 [mem 0x501a200000-0x501a23ffff 64bit] <6>[ 2.269704] pci 0000:00:0d.3: BAR 2 [mem 0x501a2e1000-0x501a2e1fff 64bit] <6>[ 2.269771] pci 0000:00:0d.3: supports D1 D2 <6>[ 2.269780] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.272580] pci 0000:00:12.0: [8086:7e45] type 00 class 0x070000 conventional PCI endpoint <6>[ 2.272630] pci 0000:00:12.0: BAR 0 [mem 0x501a2b0000-0x501a2bffff 64bit] <6>[ 2.272700] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 2.277681] pci 0000:00:14.0: [8086:7e7d] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.277733] pci 0000:00:14.0: BAR 0 [mem 0x501a2a0000-0x501a2affff 64bit] <6>[ 2.277805] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 2.282473] pci 0000:00:14.2: [8086:7e7f] type 00 class 0x050000 conventional PCI endpoint <6>[ 2.282533] pci 0000:00:14.2: BAR 0 [mem 0x501a2d4000-0x501a2d7fff 64bit] <6>[ 2.282548] pci 0000:00:14.2: BAR 2 [mem 0x501a2e0000-0x501a2e0fff 64bit] <6>[ 2.283090] pci 0000:00:15.0: [8086:7e78] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.283160] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.296364] pci 0000:00:15.1: [8086:7e79] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.296423] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.307526] pci 0000:00:15.2: [8086:7e7a] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.307585] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.318484] pci 0000:00:15.3: [8086:7e7b] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.318549] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.329518] pci 0000:00:16.0: [8086:7e70] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.329572] pci 0000:00:16.0: BAR 0 [mem 0x501a2db000-0x501a2dbfff 64bit] <6>[ 2.329635] pci 0000:00:16.0: PME# supported from D3hot <6>[ 2.332565] pci 0000:00:16.3: [8086:7e73] type 00 class 0x070002 conventional PCI endpoint <6>[ 2.332607] pci 0000:00:16.3: BAR 0 [io 0x3020-0x3027] <6>[ 2.332613] pci 0000:00:16.3: BAR 1 [mem 0x8c121000-0x8c121fff] <6>[ 2.332873] pci 0000:00:19.0: [8086:7e50] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.332929] pci 0000:00:19.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.342551] pci 0000:00:19.1: [8086:7e51] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.342608] pci 0000:00:19.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.353524] pci 0000:00:1f.0: [8086:7e02] type 00 class 0x060100 conventional PCI endpoint <6>[ 2.355085] pci 0000:00:1f.3: [8086:7e28] type 00 class 0x040100 conventional PCI endpoint <6>[ 2.355196] pci 0000:00:1f.3: BAR 0 [mem 0x501a2d0000-0x501a2d3fff 64bit] <6>[ 2.355211] pci 0000:00:1f.3: BAR 4 [mem 0x501a000000-0x501a1fffff 64bit] <6>[ 2.355328] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 2.355840] pci 0000:00:1f.4: [8086:7e22] type 00 class 0x0c0500 conventional PCI endpoint <6>[ 2.355890] pci 0000:00:1f.4: BAR 0 [mem 0x501a2d8000-0x501a2d80ff 64bit] <6>[ 2.355901] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] <6>[ 2.357265] pci 0000:00:1f.5: [8086:7e23] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.357366] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] <6>[ 2.357630] pci 0000:00:1f.6: [8086:550a] type 00 class 0x020000 conventional PCI endpoint <6>[ 2.357711] pci 0000:00:1f.6: BAR 0 [mem 0x8c100000-0x8c11ffff] <6>[ 2.357794] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold <6>[ 2.359616] pci 0000:01:00.0: [15b7:501e] type 00 class 0x010802 PCIe Endpoint <6>[ 2.359681] pci 0000:01:00.0: BAR 0 [mem 0x8c000000-0x8c003fff 64bit] <6>[ 2.361157] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 2.361364] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 2.361559] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 2.785093] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1) <6>[ 2.785111] Low-power S0 idle used by default for system suspend <6>[ 2.904054] ACPI: EC: interrupt unblocked <6>[ 2.904071] ACPI: EC: event unblocked <6>[ 2.904089] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 2.904103] ACPI: EC: GPE=0x6e <6>[ 2.904118] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 2.904137] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 2.905688] iommu: Default domain type: Translated <6>[ 2.905688] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 2.909963] SCSI subsystem initialized <7>[ 2.910263] libata version 3.00 loaded. <6>[ 2.910461] ACPI: bus type USB registered <6>[ 2.910669] usbcore: registered new interface driver usbfs <6>[ 2.910767] usbcore: registered new interface driver hub <6>[ 2.910767] usbcore: registered new device driver usb <6>[ 2.910767] pps_core: LinuxPPS API ver. 1 registered <6>[ 2.910767] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 2.910767] PTP clock support registered <6>[ 2.911338] EDAC MC: Ver: 3.0.0 <6>[ 2.913118] efivars: Registered efivars operations <6>[ 2.916036] NetLabel: Initializing <6>[ 2.916047] NetLabel: domain hash size = 128 <6>[ 2.916055] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO <6>[ 2.916179] NetLabel: unlabeled traffic allowed by default <6>[ 2.916210] mctp: management component transport protocol core <6>[ 2.916221] NET: Registered PF_MCTP protocol family <6>[ 2.916320] PCI: Using ACPI for IRQ routing <7>[ 2.933145] PCI: pci_cache_line_size set to 64 bytes <6>[ 2.933335] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window <7>[ 2.933539] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 2.933552] e820: reserve RAM buffer [mem 0x5bd45000-0x5bffffff] <7>[ 2.933558] e820: reserve RAM buffer [mem 0x5bd9b000-0x5bffffff] <7>[ 2.933562] e820: reserve RAM buffer [mem 0x60a3f000-0x63ffffff] <6>[ 2.935139] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 2.935157] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 2.935167] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 2.935193] vgaarb: loaded <6>[ 2.944104] clocksource: Switched to clocksource tsc-early <5>[ 2.952940] VFS: Disk quotas dquot_6.6.0 <6>[ 2.952995] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 2.955087] AppArmor: AppArmor Filesystem Enabled <6>[ 2.955429] pnp: PnP ACPI init <6>[ 2.957061] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 2.957082] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 2.958166] system 00:01: [io 0x1854-0x1857] has been reserved <6>[ 2.960620] system 00:03: [io 0x06a4] has been reserved <6>[ 2.960638] system 00:03: [io 0x06a0] has been reserved <4>[ 2.996939] pnp 00:04: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] <4>[ 2.996963] pnp 00:04: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] <6>[ 2.998082] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 2.998103] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 2.998126] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved <6>[ 2.998146] system 00:04: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 2.998165] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 2.998181] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 3.007397] system 00:05: [io 0x2000-0x20fe] has been reserved <4>[ 3.009260] pnp 00:07: disabling [mem 0x00000000-0x0009cfff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] <6>[ 3.014845] pnp: PnP ACPI: found 8 devices <6>[ 3.033086] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 3.034128] NET: Registered PF_INET protocol family <6>[ 3.034431] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 3.038427] tcp_listen_portaddr_hash hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 3.038655] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 3.038934] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 3.040231] TCP bind hash table entries: 65536 (order: 12, 9437184 bytes, vmalloc hugepage) <6>[ 3.041712] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 3.042497] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 3.043546] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 3.044722] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 3.044811] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2 <6>[ 3.044864] pci 0000:00:02.0: VF BAR 0 [mem 0x501b000000-0x5021ffffff 64bit pref]: assigned <6>[ 3.044884] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned <6>[ 3.044896] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff]: assigned <6>[ 3.044908] pci 0000:00:15.0: BAR 0 [mem 0x501a2d9000-0x501a2d9fff 64bit]: assigned <6>[ 3.044931] pci 0000:00:15.1: BAR 0 [mem 0x501a2da000-0x501a2dafff 64bit]: assigned <6>[ 3.044953] pci 0000:00:15.2: BAR 0 [mem 0x501a2dc000-0x501a2dcfff 64bit]: assigned <6>[ 3.045088] pci 0000:00:15.3: BAR 0 [mem 0x501a2dd000-0x501a2ddfff 64bit]: assigned <6>[ 3.045110] pci 0000:00:19.0: BAR 0 [mem 0x501a2de000-0x501a2defff 64bit]: assigned <6>[ 3.045132] pci 0000:00:19.1: BAR 0 [mem 0x501a2df000-0x501a2dffff 64bit]: assigned <6>[ 3.045158] pci 0000:00:1f.5: BAR 0 [mem 0x8c120000-0x8c120fff]: assigned <6>[ 3.045190] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 3.045205] pci 0000:00:06.0: bridge window [mem 0x8c000000-0x8c0fffff] <6>[ 3.045222] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 3.045241] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 3.045253] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff] <6>[ 3.045266] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 3.045282] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 3.045298] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff] <6>[ 3.045310] pci 0000:00:07.3: bridge window [mem 0x80000000-0x85ffffff] <6>[ 3.045323] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 3.045340] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 3.045350] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 3.045360] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 3.045371] pci_bus 0000:00: resource 7 [mem 0x80000000-0xbfffffff window] <6>[ 3.045381] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x3ffbfffffff window] <6>[ 3.045393] pci_bus 0000:01: resource 1 [mem 0x8c000000-0x8c0fffff] <6>[ 3.045404] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] <6>[ 3.045412] pci_bus 0000:02: resource 1 [mem 0x86000000-0x8bffffff] <6>[ 3.045422] pci_bus 0000:02: resource 2 [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 3.045434] pci_bus 0000:2c: resource 0 [io 0x5000-0x5fff] <6>[ 3.045443] pci_bus 0000:2c: resource 1 [mem 0x80000000-0x85ffffff] <6>[ 3.045453] pci_bus 0000:2c: resource 2 [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 3.047546] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 3.050581] PCI: CLS 0 bytes, default 64 <6>[ 3.050726] DMAR: No RMRR found <6>[ 3.050741] DMAR: No ATSR found <6>[ 3.050748] DMAR: dmar0: Using Queued invalidation <6>[ 3.050759] DMAR: dmar1: Using Queued invalidation <6>[ 3.052060] pci 0000:00:02.0: Adding to iommu group 0 <6>[ 3.054070] pci 0000:00:00.0: Adding to iommu group 1 <6>[ 3.054178] pci 0000:00:04.0: Adding to iommu group 2 <6>[ 3.054283] pci 0000:00:05.0: Adding to iommu group 3 <6>[ 3.054401] pci 0000:00:06.0: Adding to iommu group 4 <6>[ 3.054537] pci 0000:00:07.0: Adding to iommu group 5 <6>[ 3.054672] pci 0000:00:07.3: Adding to iommu group 6 <6>[ 3.054772] pci 0000:00:08.0: Adding to iommu group 7 <6>[ 3.054866] pci 0000:00:0a.0: Adding to iommu group 8 <6>[ 3.054969] pci 0000:00:0b.0: Adding to iommu group 9 <6>[ 3.055099] pci 0000:00:0d.0: Adding to iommu group 10 <6>[ 3.055170] pci 0000:00:0d.3: Adding to iommu group 10 <6>[ 3.055276] pci 0000:00:12.0: Adding to iommu group 11 <6>[ 3.055398] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 3.055473] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 3.055616] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 3.055689] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 3.055759] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 3.055834] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 3.055949] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 3.056031] pci 0000:00:16.3: Adding to iommu group 14 <6>[ 3.056148] pci 0000:00:19.0: Adding to iommu group 15 <6>[ 3.056224] pci 0000:00:19.1: Adding to iommu group 15 <6>[ 3.056377] pci 0000:00:1f.0: Adding to iommu group 16 <6>[ 3.056453] pci 0000:00:1f.3: Adding to iommu group 16 <6>[ 3.056529] pci 0000:00:1f.4: Adding to iommu group 16 <6>[ 3.056607] pci 0000:00:1f.5: Adding to iommu group 16 <6>[ 3.056686] pci 0000:00:1f.6: Adding to iommu group 16 <6>[ 3.056800] pci 0000:01:00.0: Adding to iommu group 17 <6>[ 3.081084] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 3.081098] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 3.081108] software IO TLB: mapped [mem 0x0000000056dec000-0x000000005adec000] (64MB) <6>[ 3.084959] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 3.085358] clocksource: Switched to clocksource tsc <6>[ 3.085552] platform rtc_cmos: registered platform RTC device (no PNP device found) <5>[ 3.096465] Initialise system trusted keyrings <5>[ 3.096557] Key type blacklist registered <6>[ 3.096896] workingset: timestamp_bits=36 max_order=23 bucket_order=0 <6>[ 3.109509] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 3.109651] ntfs3: Enabled Linux POSIX ACLs support <6>[ 3.109660] ntfs3: Read-only LZX/Xpress compression included <5>[ 3.111330] integrity: Platform Keyring initialized <5>[ 3.111359] integrity: Machine keyring initialized <6>[ 3.119276] xor: automatically using best checksumming function avx <5>[ 3.119290] Key type asymmetric registered <5>[ 3.119304] Asymmetric key parser 'x509' registered <6>[ 3.119458] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) <6>[ 3.119915] io scheduler mq-deadline registered <6>[ 3.123763] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 3.126301] pcieport 0000:00:06.0: PME: Signaling with IRQ 122 <6>[ 3.128405] pcieport 0000:00:07.0: PME: Signaling with IRQ 123 <6>[ 3.130298] pcieport 0000:00:07.3: PME: Signaling with IRQ 124 <6>[ 3.132760] ACPI: AC: AC Adapter [ADP1] (on-line) <6>[ 3.133214] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 3.133735] ACPI: button: Lid Switch [LID0] <6>[ 3.134120] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 3.134361] ACPI: button: Sleep Button [SLPB] <6>[ 3.134664] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 3.134915] ACPI: button: Power Button [PWRB] <6>[ 3.244954] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 3.244978] ACPI: thermal: Thermal Zone [TZ00] (36 C) <6>[ 3.246653] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 3.246766] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled <6>[ 3.248476] ACPI: battery: Slot [BAT0] (battery present) <6>[ 3.269897] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 3.290567] serial 0000:00:12.0: enabling device (0000 -> 0002) <6>[ 3.293659] serial 0000:00:16.3: enabling device (0001 -> 0003) <6>[ 3.317557] 0000:00:16.3: ttyS4 at I/O 0x3020 (irq = 19, base_baud = 115200) is a 16550A <5>[ 3.319769] hpet_acpi_add: no address or irqs in _CRS <6>[ 3.319891] Linux agpgart interface v0.103 <6>[ 3.348116] ACPI: bus type drm_connector registered <7>[ 3.349834] initcall simpledrm_platform_driver_init blacklisted <6>[ 3.381998] loop: module loaded <6>[ 3.436510] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 3.568694] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 3.699940] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 3.829869] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <6>[ 3.959254] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002) <6>[ 4.086454] intel-lpss 0000:00:19.1: enabling device (0000 -> 0002) <5>[ 4.212146] Key type psk registered <6>[ 4.215298] nvme 0000:01:00.0: platform quirk: setting simple suspend <6>[ 4.216621] tun: Universal TUN/TAP device driver, 1.6 <6>[ 4.216746] nvme nvme0: pci function 0000:01:00.0 <6>[ 4.217879] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 4.218832] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 4.220931] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 4.223426] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 4.223458] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 4.223489] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 4.223948] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.19 <6>[ 4.223979] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.223992] usb usb1: Product: xHCI Host Controller <6>[ 4.224001] usb usb1: Manufacturer: Linux 6.19.0-rc1-CI_DRM_17704-g31985bb0a701+ xhci-hcd <6>[ 4.224015] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 4.225203] hub 1-0:1.0: USB hub found <6>[ 4.225320] hub 1-0:1.0: 1 port detected <6>[ 4.229628] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.19 <6>[ 4.229645] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.229658] usb usb2: Product: xHCI Host Controller <6>[ 4.229667] usb usb2: Manufacturer: Linux 6.19.0-rc1-CI_DRM_17704-g31985bb0a701+ xhci-hcd <6>[ 4.229680] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 4.230563] hub 2-0:1.0: USB hub found <6>[ 4.230632] hub 2-0:1.0: 4 ports detected <6>[ 4.266571] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 4.266617] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 4.268548] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 4.270732] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 4.270759] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 4.270782] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 4.271034] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.19 <6>[ 4.271050] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.271063] usb usb3: Product: xHCI Host Controller <6>[ 4.271073] usb usb3: Manufacturer: Linux 6.19.0-rc1-CI_DRM_17704-g31985bb0a701+ xhci-hcd <6>[ 4.271087] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 4.272021] hub 3-0:1.0: USB hub found <6>[ 4.272077] hub 3-0:1.0: 12 ports detected <6>[ 4.294416] nvme nvme0: allocated 64 MiB host memory buffer (1 segment). <6>[ 4.317328] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.19 <6>[ 4.317360] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.317377] usb usb4: Product: xHCI Host Controller <6>[ 4.317389] usb usb4: Manufacturer: Linux 6.19.0-rc1-CI_DRM_17704-g31985bb0a701+ xhci-hcd <6>[ 4.317408] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 4.318794] hub 4-0:1.0: USB hub found <6>[ 4.318879] hub 4-0:1.0: 2 ports detected <6>[ 4.328680] usbcore: registered new interface driver usb-storage <6>[ 4.329481] usbcore: registered new interface driver usbserial_generic <6>[ 4.329671] usbserial: USB Serial support registered for generic <6>[ 4.329823] usbcore: registered new interface driver ftdi_sio <6>[ 4.329889] usbserial: USB Serial support registered for FTDI USB Serial Device <6>[ 4.330039] usbcore: registered new interface driver pl2303 <6>[ 4.330102] usbserial: USB Serial support registered for pl2303 <6>[ 4.330344] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 4.330361] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 5.031402] i8042: Can't read CTR while initializing i8042 <3>[ 5.031422] i8042 i8042: probe with driver i8042 failed with error -5 <6>[ 5.033166] mousedev: PS/2 mouse device common for all mice <6>[ 5.033558] nvme nvme0: 16/0/0 default/read/poll queues <6>[ 5.035174] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 5.037758] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 5.038002] rtc_cmos rtc_cmos: setting system clock to 2025-12-18T14:42:28 UTC (1766068948) <6>[ 5.038294] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 5.038405] i2c_dev: i2c /dev entries driver <6>[ 5.044826] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 5.044856] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 5.044874] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. <6>[ 5.044940] device-mapper: uevent: version 1.0.3 <6>[ 5.045640] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev <6>[ 5.045670] intel_pstate: Intel P-state driver initializing <6>[ 5.055449] nvme0n1: p1 p2 <6>[ 5.065796] intel_pstate: HWP enabled <6>[ 5.065828] sdhci: Secure Digital Host Controller Interface driver <6>[ 5.065842] sdhci: Copyright(c) Pierre Ossman <6>[ 5.066245] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 5.074478] drop_monitor: Initializing network drop monitor service <6>[ 5.075045] NET: Registered PF_INET6 protocol family <6>[ 5.078447] Segment Routing with IPv6 <6>[ 5.078575] In-situ OAM (IOAM) with IPv6 <6>[ 5.078723] NET: Registered PF_PACKET protocol family <5>[ 5.079108] Key type dns_resolver registered <4>[ 5.093410] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 5.095146] microcode: Current revision: 0x0000001c <6>[ 5.097390] IPI shorthand broadcast: enabled <6>[ 5.118995] sched_clock: Marking stable (5110000952, 8964700)->(5190002082, -71036430) <6>[ 5.121513] registered taskstats version 1 <5>[ 5.129375] Loading compiled-in X.509 certificates <6>[ 5.175412] Demotion targets for Node 0: null <6>[ 5.175688] kmemleak: Kernel memory leak detector initialized (mem pool available: 14930) <6>[ 5.175699] kmemleak: Automatic memory scanning thread started <5>[ 5.175958] Key type .fscrypt registered <5>[ 5.175962] Key type fscrypt-provisioning registered <6>[ 5.179249] Btrfs loaded, zoned=yes, fsverity=yes <5>[ 5.179384] Key type trusted registered <5>[ 5.185096] Key type encrypted registered <6>[ 5.185125] AppArmor: AppArmor sha256 policy hashing enabled <5>[ 5.185194] Loading compiled-in module X.509 certificates <5>[ 5.186948] Loaded X.509 cert 'Build time autogenerated kernel key: 8f202b7f276f707552355985c25a3ba23375527e' <6>[ 5.186987] ima: Allocated hash algorithm: sha256 <6>[ 5.228977] ima: No architecture policies found <6>[ 5.229279] evm: Initialising EVM extended attributes: <6>[ 5.229293] evm: security.selinux <6>[ 5.229304] evm: security.SMACK64 <6>[ 5.229314] evm: security.SMACK64EXEC <6>[ 5.229324] evm: security.SMACK64TRANSMUTE <6>[ 5.229336] evm: security.SMACK64MMAP <6>[ 5.229347] evm: security.apparmor <6>[ 5.229357] evm: security.ima <6>[ 5.229366] evm: security.capability <6>[ 5.229377] evm: HMAC attrs: 0x1 <6>[ 5.233117] PM: Magic number: 5:559:738 <6>[ 5.233359] netconsole: network logging started <6>[ 5.234087] RAS: Correctable Errors collector initialized. <6>[ 5.234262] clk: Disabling unused clocks <6>[ 5.234273] PM: genpd: Disabling unused power domains <4>[ 5.234492] check access for rdinit=/init failed: -2, ignoring <6>[ 5.234499] md: Waiting for all devices to be available before autodetect <6>[ 5.234504] md: If you don't use raid, use raid=noautodetect <6>[ 5.234508] md: Autodetecting RAID arrays. <6>[ 5.235584] md: autorun ... <6>[ 5.235588] md: ... autorun DONE. <6>[ 5.249244] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd <6>[ 5.263100] usb 4-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 <6>[ 5.263126] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 <6>[ 5.263139] usb 4-1: Product: USB 10/100/1000 LAN <6>[ 5.263148] usb 4-1: Manufacturer: Realtek <6>[ 5.263157] usb 4-1: SerialNumber: 000001 <6>[ 5.312081] EXT4-fs (nvme0n1p2): mounted filesystem 025420cd-c844-4e26-bc37-f17331faa4f5 ro with ordered data mode. Quota mode: none. <6>[ 5.312144] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 5.313029] devtmpfs: mounted <6>[ 5.330805] Freeing unused decrypted memory: 2036K <6>[ 5.332095] Freeing unused kernel image (initmem) memory: 5716K <6>[ 5.332155] Write protecting the kernel read-only data: 36864k <6>[ 5.333442] Freeing unused kernel image (text/rodata gap) memory: 1056K <6>[ 5.334119] Freeing unused kernel image (rodata/data gap) memory: 584K <6>[ 5.340489] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 5.349077] Run /sbin/init as init process <7>[ 5.349084] with arguments: <7>[ 5.349085] /sbin/init <7>[ 5.349086] with environment: <7>[ 5.349087] HOME=/ <7>[ 5.349087] TERM=linux <7>[ 5.432189] systemd[1]: Inserted module 'autofs4' <7>[ 5.474381] systemd[1]: systemd 255.4-1ubuntu8.8 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <7>[ 5.474414] systemd[1]: Detected architecture x86-64. <7>[ 5.476293] systemd[1]: Hostname set to . <7>[ 5.755938] systemd[1]: Queued start job for default target graphical.target. <7>[ 5.803761] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. <7>[ 5.805858] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. <7>[ 5.807585] systemd[1]: Created slice user.slice - User and Session Slice. <7>[ 5.807863] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. <7>[ 5.808594] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. <7>[ 5.808728] systemd[1]: Expecting device dev-disk-by\x2duuid-E53D\x2dCF06.device - /dev/disk/by-uuid/E53D-CF06... <7>[ 5.808823] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. <7>[ 5.808912] systemd[1]: Reached target slices.target - Slice Units. <7>[ 5.809006] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. <7>[ 5.809083] systemd[1]: Reached target snapd.mounts.target - Mounted snaps. <7>[ 5.809163] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. <7>[ 5.809424] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. <7>[ 5.809837] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. <7>[ 5.810172] systemd[1]: Listening on multipathd.socket - multipathd control socket. <7>[ 5.810531] systemd[1]: Listening on syslog.socket - Syslog Socket. <7>[ 5.810828] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. <7>[ 5.811075] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. <7>[ 5.811410] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). <7>[ 5.811783] systemd[1]: Listening on systemd-journald.socket - Journal Socket. <7>[ 5.812112] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. <7>[ 5.812327] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 5.812664] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. <7>[ 5.812979] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. <7>[ 5.816744] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... <7>[ 5.819795] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... <7>[ 5.823183] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... <7>[ 5.828717] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... <7>[ 5.837164] systemd[1]: Starting systemd-journald.service - Journal Service... <7>[ 5.841605] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... <7>[ 5.847246] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... <7>[ 5.850508] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... <7>[ 5.854374] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... <7>[ 5.858164] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... <7>[ 5.859958] systemd-journald[309]: Collecting audit messages is disabled. <7>[ 5.861359] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... <7>[ 5.872062] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... <7>[ 5.874597] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... <7>[ 5.877248] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... <7>[ 5.881155] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics... <7>[ 5.881947] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). <7>[ 5.886987] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... <6>[ 5.890198] pstore: Using crash dump compression: deflate <6>[ 5.891997] pstore: Registered efi_pstore as persistent store backend <7>[ 5.892136] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... <7>[ 5.892224] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 5.892293] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 5.896604] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... <6>[ 5.897179] fuse: init (API version 7.45) <7>[ 5.905749] systemd[1]: Started systemd-journald.service - Journal Service. <6>[ 6.050057] EXT4-fs (nvme0n1p2): re-mounted 025420cd-c844-4e26-bc37-f17331faa4f5 r/w. <6>[ 6.071649] Adding 8388604k swap on /swap.img. Priority:-1 extents:66 across:354877440k SS <7>[ 6.079642] systemd-journald[309]: Received client request to flush runtime journal. <7>[ 6.105104] systemd-journald[309]: /var/log/journal/04d478aecf7541429ca46e6ba0f49fb5/system.journal: Journal file uses a different sequence number ID, rotating. <7>[ 6.105121] systemd-journald[309]: Rotating system journal. <4>[ 6.828910] nvme nvme0: using unchecked data buffer <6>[ 6.959790] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002) <6>[ 6.978524] intel_pmc_ssram_telemetry 0000:00:14.2: enabling device (0000 -> 0002) <6>[ 7.031478] input: Intel HID events as /devices/platform/INTC1077:00/input/input3 <6>[ 7.049136] intel-hid INTC1077:00: platform supports 5 button array <6>[ 7.072891] input: Intel HID 5 button array as /devices/platform/INTC1077:00/input/input4 <3>[ 7.145551] int3472-tps68470 i2c-INT3472:0d: TPS68470 init error -121 <3>[ 7.145722] int3472-tps68470 i2c-INT3472:0d: probe with driver int3472-tps68470 failed with error -121 <4>[ 7.232007] resource: resource sanity check: requesting [mem 0x00000000fedc0000-0x00000000fedcffff], which spans more than pnp 00:04 [mem 0xfedc0000-0xfedc7fff] <4>[ 7.232033] caller igen6_probe+0x190/0x9ea [igen6_edac] mapping multiple BARs <6>[ 7.234007] ACPI: bus type thunderbolt registered <6>[ 7.234729] pci 0000:00:08.0: Setting to D3hot <6>[ 7.246014] pci 0000:00:05.0: Setting to D3hot <6>[ 7.247852] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002) <5>[ 7.251168] audit: type=1400 audit(1766068950.712:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=555 comm="apparmor_parser" <5>[ 7.251593] audit: type=1400 audit(1766068950.712:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=556 comm="apparmor_parser" <5>[ 7.251860] audit: type=1400 audit(1766068950.712:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=558 comm="apparmor_parser" <5>[ 7.252524] audit: type=1400 audit(1766068950.713:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=559 comm="apparmor_parser" <5>[ 7.254426] audit: type=1400 audit(1766068950.715:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=560 comm="apparmor_parser" <5>[ 7.256192] audit: type=1400 audit(1766068950.717:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=561 comm="apparmor_parser" <6>[ 7.258623] intel_pmc_core INT33A1:00: initialized <5>[ 7.258800] audit: type=1400 audit(1766068950.719:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=562 comm="apparmor_parser" <5>[ 7.261518] audit: type=1400 audit(1766068950.722:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=564 comm="apparmor_parser" <5>[ 7.262078] audit: type=1400 audit(1766068950.722:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=563 comm="apparmor_parser" <5>[ 7.262537] audit: type=1400 audit(1766068950.723:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=565 comm="apparmor_parser" <6>[ 7.273538] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_37xx_v0.0.bin, version: 20230726*MTL_CLIENT_SILICON-release*2101*ci_tag_mtl_pv_vpu_rc_20230726_2101*648a666b8b9 <6>[ 7.273546] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS <6>[ 7.274040] EDAC MC0: Giving out device to module igen6_edac controller Intel_client_SoC MC#0: DEV 0000:00:00.0 (INTERRUPT) <6>[ 7.281726] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 7.281729] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 7.287438] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode <6>[ 7.330356] EDAC MC1: Giving out device to module igen6_edac controller Intel_client_SoC MC#1: DEV 0000:00:00.0 (INTERRUPT) <6>[ 7.331320] idma64 idma64.0: Found Intel integrated DMA 64-bit <6>[ 7.333713] EDAC igen6: v2.5.1 <6>[ 7.351537] idma64 idma64.1: Found Intel integrated DMA 64-bit <6>[ 7.356250] i801_smbus 0000:00:1f.4: SPD Write Disable is set <6>[ 7.356444] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt <6>[ 7.403180] idma64 idma64.2: Found Intel integrated DMA 64-bit <6>[ 7.438271] idma64 idma64.3: Found Intel integrated DMA 64-bit <6>[ 7.509164] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock <6>[ 7.520615] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0 <6>[ 7.599703] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88 <6>[ 7.599710] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection <6>[ 7.599823] e1000e 0000:00:1f.6 eth0: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF <6>[ 7.645743] intel_rapl_msr: PL4 support detected. <6>[ 7.649542] intel_rapl_common: Found RAPL domain package <6>[ 7.649547] intel_rapl_common: Found RAPL domain core <6>[ 7.649733] intel_rapl_common: Found RAPL domain uncore <6>[ 7.649736] intel_rapl_common: Found RAPL domain psys <6>[ 7.835750] usbcore: registered new device driver r8152-cfgselector <4>[ 7.835955] spi-nor spi0.0: supply vcc not found, using dummy regulator <6>[ 7.837172] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 7.837177] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 7.837179] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 7.837180] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules <6>[ 7.837181] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 7.854568] e1000e 0000:00:1f.6 eno0: renamed from eth0 <6>[ 7.864461] hid: raw HID events driver (C) Jiri Kosina <5>[ 7.867560] Creating 1 MTD partitions on "0000:00:1f.5": <5>[ 7.867588] 0x000000000000-0x000002000000 : "BIOS" <6>[ 7.869358] proc_thermal_pci 0000:00:04.0: enabling device (0000 -> 0002) <6>[ 7.872679] intel_rapl_common: Found RAPL domain package <6>[ 7.874655] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6 <6>[ 7.886321] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 7.891852] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.904455] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.917164] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.934421] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.936618] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.936709] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.944069] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.949520] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.949640] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.953128] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 7.954111] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 7.956041] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.960918] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.961583] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.965921] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.967975] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.971032] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.972285] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.977752] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.979611] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.981611] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 7.984123] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 7.984299] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.985324] r8152-cfgselector 4-1: reset SuperSpeed USB device number 2 using xhci_hcd <6>[ 7.989683] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.055781] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.058880] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.062874] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.066040] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.069872] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.074712] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.079881] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.084628] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.088210] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.091686] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.098538] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.101861] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.106265] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.110392] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.115365] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.118911] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.124257] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.129564] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.135535] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.145490] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 8.227727] block nvme0n1: No UUID available providing old NGUID <6>[ 8.228898] r8152 4-1:1.0 eth0: v1.12.13 <6>[ 8.229146] usbcore: registered new interface driver r8152 <6>[ 8.236072] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.238036] usbcore: registered new interface driver cdc_ether <6>[ 8.242221] usbcore: registered new interface driver r8153_ecm <6>[ 8.304502] r8152 4-1:1.0 enxe2015072f492: renamed from eth0 <6>[ 8.345918] evm: overlay not supported <6>[ 8.483277] loop0: detected capacity change from 0 to 8 <6>[ 8.684622] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.695991] Consider using thermal netlink events interface <6>[ 11.044930] r8152 4-1:1.0 enxe2015072f492: carrier on <3>[ 16.470652] ucsi_acpi USBC000:00: error -ETIMEDOUT: PPM init failed <6>[ 19.069646] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 19.072965] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component <7>[ 25.107569] systemd-journald[309]: /var/log/journal/04d478aecf7541429ca46e6ba0f49fb5/user-1000.journal: Journal file uses a different sequence number ID, rotating. <6>[ 25.809480] /proc/cgroups lists only v1 controllers, use cgroup.controllers of root cgroup for v2 info <7>[ 47.939146] [IGT] i915_module_load: executing <4>[ 47.939194] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <7>[ 48.063306] [IGT] i915_module_load: starting subtest load <4>[ 48.656497] ********************************************************** <4>[ 48.656498] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 48.656499] ** ** <4>[ 48.656499] ** trace_printk() being used. Allocating extra memory. ** <4>[ 48.656500] ** ** <4>[ 48.656501] ** This means that this is a DEBUG kernel and it is ** <4>[ 48.656501] ** unsafe for production use. ** <4>[ 48.656502] ** ** <4>[ 48.656503] ** If you see this message and you are not debugging ** <4>[ 48.656503] ** the kernel, report this immediately to your vendor! ** <4>[ 48.656504] ** ** <4>[ 48.656505] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 48.656505] ********************************************************** <5>[ 48.691106] Setting dangerous option force_probe - tainting kernel <6>[ 48.695893] i915 0000:00:02.0: [drm] Found meteorlake (device ID 7d55) integrated display version 14.00 stepping C0 <7>[ 48.697204] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K <7>[ 48.697478] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:no slpc:yes) <7>[ 48.697659] i915 0000:00:02.0: [drm:intel_pch_detect [i915]] PCH not involved in display, using fake PCH type 1026 for south display <7>[ 48.697828] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7>[ 48.698064] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7>[ 48.698247] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT1: Setting up Standalone Media GT <7>[ 48.698451] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K <7>[ 48.698721] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT1: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes) <7>[ 48.698983] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7>[ 48.699170] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 38400 kHz <7>[ 48.699684] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vdbox enable: 0000, instances: 0000 <7>[ 48.699829] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vebox enable: 0000, instances: 0000 <7>[ 48.700309] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vdbox enable: 0005, instances: 0005 <7>[ 48.700451] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vebox enable: 0001, instances: 0001 <7>[ 48.700870] i915 0000:00:02.0: [drm:ggtt_probe_common [i915]] Using direct GSM access <7>[ 48.701178] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7>[ 48.701315] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 0M <7>[ 48.701448] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M <6>[ 48.701576] i915 0000:00:02.0: [drm] VT-d active for gfx access <6>[ 48.701955] i915 0000:00:02.0: vgaarb: deactivate vga console <6>[ 48.702344] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7>[ 48.702352] i915 0000:00:02.0: [drm:i915_gem_stolen_lmem_setup [i915]] Using direct DSM access <7>[ 48.702533] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000078400947 <7>[ 48.703006] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 131072K, usable: 126976K <7>[ 48.703280] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 31513 MiB [mem 0x00000000-0x7b1943fff], io: n/a <7>[ 48.703422] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(6): stolen-local: 124 MiB [mem 0x00800000-0x083fffff], io: 124 MiB [mem 0x70800000-0x783fffff] <7>[ 48.703798] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x63e09018 <7>[ 48.704006] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 3.0.0 <7>[ 48.704162] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7>[ 48.704311] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7>[ 48.704459] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7>[ 48.704604] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Mailbox #2 for backlight present <7>[ 48.704764] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 48.704918] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR5 <7>[ 48.705097] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 8 <7>[ 48.705269] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 4 <7>[ 48.705427] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7>[ 48.705591] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=3200 tRP=64 tRDPRE=40 tRAS=136 tRCD=64 tRC=200 <7>[ 48.705771] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=6000 tRP=112 tRDPRE=80 tRAS=0 tRCD=112 tRC=112 <7>[ 48.705939] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=16 tRCD=120 tRC=136 <7>[ 48.706120] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 3: DCLK=5600 tRP=104 tRDPRE=80 tRAS=240 tRCD=104 tRC=344 <7>[ 48.706298] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 0: num_planes=0 deratedbw=28913 peakbw: 51200 <7>[ 48.706457] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 48.706609] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 48.706760] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 48.706909] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 0: num_planes=0 deratedbw=35532 peakbw: 51200 <7>[ 48.707073] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 48.707228] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 48.707376] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 48.707524] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 48.707681] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 48.707832] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 48.707999] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 48.708157] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 48.708310] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 48.708460] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 48.708626] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 48.708787] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 48.708937] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 48.709114] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 48.709264] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 48.709410] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 48.709554] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 48.709697] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 48.709840] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 48.710336] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7>[ 48.710503] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT METEORLAKE ", BDB version 253 <7>[ 48.710665] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7) <7>[ 48.710821] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5) <7>[ 48.710983] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7>[ 48.711159] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7>[ 48.711313] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 848) <7>[ 48.711466] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34) <7>[ 48.711618] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7>[ 48.711783] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7>[ 48.711938] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366) <7>[ 48.712112] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305) <7>[ 48.712262] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 98, min size 136) <7>[ 48.712412] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7>[ 48.712574] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7>[ 48.712726] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 48.712876] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7>[ 48.713046] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7>[ 48.713200] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7>[ 48.713353] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 48.713525] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7>[ 48.713676] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 48.713824] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 48.713968] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7>[ 48.714129] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 48.714282] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 48.714430] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 48.714577] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 48.714723] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 48.714869] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 48.715044] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a <7>[ 48.715221] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 48.715439] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7>[ 48.715648] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 48.715879] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 48.716194] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7>[ 48.716569] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7>[ 48.716822] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 48.717088] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 48.717367] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <6>[ 48.717738] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem <7>[ 48.717761] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7>[ 48.717944] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B <7>[ 48.718139] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C <7>[ 48.718315] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D <7>[ 48.718905] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/mtl_dmc.bin <7>[ 48.719930] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7>[ 48.720863] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us <7>[ 48.721049] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7>[ 48.721209] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 85 (85.0 usec) <7>[ 48.721362] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 86 (86.0 usec) <7>[ 48.721513] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 101 (101.0 usec) <7>[ 48.721660] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 102 (102.0 usec) <7>[ 48.721807] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 155 (155.0 usec) <7>[ 48.721956] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 6 (6.0 usec) <7>[ 48.722123] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 91 (91.0 usec) <7>[ 48.722266] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 92 (92.0 usec) <7>[ 48.722410] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 107 (107.0 usec) <7>[ 48.722560] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 108 (108.0 usec) <7>[ 48.722704] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 161 (161.0 usec) <7>[ 48.724914] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7>[ 48.725115] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x86fc0 <7>[ 48.725280] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7>[ 48.725545] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f004 = 0x42c0408 (EVT_HTP) <7>[ 48.725764] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL) <7>[ 48.725954] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x8f008 = 0x534052f4 (EVT_HTP) <7>[ 48.726241] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 1: <7>[ 48.726497] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f074 = 0x96fc0 <7>[ 48.726711] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling) <7>[ 48.726922] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f004 = 0x212c20f4 (EVT_HTP) <7>[ 48.727135] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling) <7>[ 48.727345] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f008 = 0x222021e8 (EVT_HTP) <7>[ 48.727533] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 48.727731] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f00c = 0x23f422dc (EVT_HTP) <7>[ 48.727928] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 48.728166] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f010 = 0x26ec26c0 (EVT_HTP) <7>[ 48.728377] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 2: <7>[ 48.728607] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f474 = 0x9efc0 <7>[ 48.728602] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 4 display pipes available. <7>[ 48.728845] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling) <7>[ 48.729089] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f404 = 0xa618a5e0 (EVT_HTP) <7>[ 48.729292] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling) <7>[ 48.729500] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f408 = 0xa70ca6d4 (EVT_HTP) <7>[ 48.729705] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 48.729922] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f40c = 0xa8e0a7c8 (EVT_HTP) <7>[ 48.730161] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 48.730377] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f410 = 0xabd8abac (EVT_HTP) <7>[ 48.730596] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 3: <7>[ 48.730809] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f874 = 0x53fc0 <7>[ 48.731016] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 48.731242] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f80c = 0x24a02388 (EVT_HTP) <7>[ 48.731463] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 48.731674] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f810 = 0x2798276c (EVT_HTP) <7>[ 48.731898] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 4: <7>[ 48.732128] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5fc74 = 0x5afc0 <7>[ 48.732357] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 48.732565] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5fc0c = 0x94a09388 (EVT_HTP) <7>[ 48.732768] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5fc40 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 48.732993] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5fc10 = 0x9798976c (EVT_HTP) <7>[ 48.736464] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 48.736662] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz <7>[ 48.736831] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 1305600 kHz <7>[ 48.737130] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:505:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 48.737427] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:505:DDI A/PHY A] <7>[ 48.737652] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7>[ 48.737827] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7>[ 48.738005] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7>[ 48.738178] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 48.738357] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7>[ 48.738534] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7>[ 48.738702] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7>[ 48.738857] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7>[ 48.739070] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 48.739321] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:505:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 48.741074] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 48.741325] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 48.741554] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 48.741763] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 48.741968] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <6>[ 48.742111] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/mtl_dmc.bin (v2.23) <7>[ 48.742320] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 48.742745] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 48.744142] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 turning VDD on <7>[ 48.744454] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 48.745718] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 00 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 48.746095] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7>[ 48.746665] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 04 83 85 04 00 <7>[ 48.747390] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 3 <7>[ 48.747830] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] PSR2 supported <7>[ 48.749092] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 48.754811] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 48.754822] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD monitor <7>[ 48.754826] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD size 20, SAD count 0 <7>[ 48.754877] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:506:eDP-1] using preferred EDID fixed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 48.755341] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:506:eDP-1] Performing OUI wait (0 ms) <7>[ 48.755804] i915 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [i915]] [CONNECTOR:506:eDP-1] Detected unsupported HDR backlight interface version 0 <7>[ 48.755987] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:506:eDP-1] DRRS type: none <7>[ 48.756233] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:506:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 48.756435] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:506:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 48.756642] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 48.756790] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 48.756937] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 48.757099] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 48.757259] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 48.757550] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 48.757840] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:514:DDI B/PHY B] Using AUX CH B (VBT) <7>[ 48.758024] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:514:DDI B/PHY B] <7>[ 48.758490] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:514:DDI B/PHY B] <7>[ 48.758645] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:514:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7>[ 48.759011] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:532:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 48.759302] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 48.759590] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:532:DDI TC1/PHY TC1] <7>[ 48.759905] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:541:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 48.760169] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected) <7>[ 48.760562] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7>[ 48.760739] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:541:DDI TC2/PHY TC2] <7>[ 48.760887] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:541:DDI TC2/PHY TC2] Using DDC pin 0xa (VBT) <7>[ 48.761168] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:545:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 48.761412] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port F/TC#3: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 48.761667] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:545:DDI TC3/PHY TC3] <7>[ 48.761985] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:554:DDI TC4/PHY TC4] Using AUX CH USBC4 (VBT) <7>[ 48.762218] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port G/TC#4: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 48.762488] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:554:DDI TC4/PHY TC4] <7>[ 48.763432] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:149:pipe A] hw state readout: enabled <7>[ 48.763769] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:267:pipe B] hw state readout: disabled <7>[ 48.764099] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:385:pipe C] hw state readout: disabled <7>[ 48.764473] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:503:pipe D] hw state readout: disabled <7>[ 48.764649] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: enabled, pipe A <7>[ 48.764807] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A <7>[ 48.764967] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A <7>[ 48.765144] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A <7>[ 48.765306] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A <7>[ 48.765476] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:143:cursor A] hw state readout: disabled, pipe A <7>[ 48.765633] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 1B] hw state readout: disabled, pipe B <7>[ 48.765790] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:181:plane 2B] hw state readout: disabled, pipe B <7>[ 48.765949] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 3B] hw state readout: disabled, pipe B <7>[ 48.766118] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:241:plane 4B] hw state readout: disabled, pipe B <7>[ 48.766305] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:251:plane 5B] hw state readout: disabled, pipe B <7>[ 48.766490] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:261:cursor B] hw state readout: disabled, pipe B <7>[ 48.766645] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:269:plane 1C] hw state readout: disabled, pipe C <7>[ 48.766799] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:299:plane 2C] hw state readout: disabled, pipe C <7>[ 48.766950] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:329:plane 3C] hw state readout: disabled, pipe C <7>[ 48.767118] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:359:plane 4C] hw state readout: disabled, pipe C <7>[ 48.767295] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:369:plane 5C] hw state readout: disabled, pipe C <7>[ 48.767472] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:379:cursor C] hw state readout: disabled, pipe C <7>[ 48.767626] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:387:plane 1D] hw state readout: disabled, pipe D <7>[ 48.767777] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:417:plane 2D] hw state readout: disabled, pipe D <7>[ 48.767928] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:447:plane 3D] hw state readout: disabled, pipe D <7>[ 48.768120] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:477:plane 4D] hw state readout: disabled, pipe D <7>[ 48.768277] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:487:plane 5D] hw state readout: disabled, pipe D <7>[ 48.768434] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:497:cursor D] hw state readout: disabled, pipe D <7>[ 48.769364] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 48.769602] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:505:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 48.769770] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:514:DDI B/PHY B] hw state readout: disabled, pipe A <7>[ 48.769923] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:516:DP-MST A] hw state readout: disabled, pipe A <7>[ 48.770082] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:517:DP-MST B] hw state readout: disabled, pipe B <7>[ 48.770252] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:518:DP-MST C] hw state readout: disabled, pipe C <7>[ 48.770427] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:519:DP-MST D] hw state readout: disabled, pipe D <7>[ 48.770662] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 48.770816] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:532:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 48.770959] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:534:DP-MST A] hw state readout: disabled, pipe A <7>[ 48.771115] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:535:DP-MST B] hw state readout: disabled, pipe B <7>[ 48.771289] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:536:DP-MST C] hw state readout: disabled, pipe C <7>[ 48.771451] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:537:DP-MST D] hw state readout: disabled, pipe D <7>[ 48.771666] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 48.771819] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:541:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 48.771986] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 48.772145] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:545:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 48.772314] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:547:DP-MST A] hw state readout: disabled, pipe A <7>[ 48.772477] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:548:DP-MST B] hw state readout: disabled, pipe B <7>[ 48.772622] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:549:DP-MST C] hw state readout: disabled, pipe C <7>[ 48.772760] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:550:DP-MST D] hw state readout: disabled, pipe D <7>[ 48.772914] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port G/TC#4: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 48.773097] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:554:DDI TC4/PHY TC4] hw state readout: disabled, pipe A <7>[ 48.773264] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:556:DP-MST A] hw state readout: disabled, pipe A <7>[ 48.773424] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:557:DP-MST B] hw state readout: disabled, pipe B <7>[ 48.773573] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:558:DP-MST C] hw state readout: disabled, pipe C <7>[ 48.773715] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:559:DP-MST D] hw state readout: disabled, pipe D <7>[ 48.774511] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:149:pipe A] reserving DPLL 0 <7>[ 48.774684] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x1, on 1 <7>[ 48.774844] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 48.775002] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7>[ 48.775165] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 48.775320] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7>[ 48.775475] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7>[ 48.775628] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7>[ 48.775899] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:506:eDP-1] hw state readout: enabled <7>[ 48.776090] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:515:DP-1] hw state readout: disabled <7>[ 48.776267] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:527:HDMI-A-1] hw state readout: disabled <7>[ 48.776449] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:533:DP-2] hw state readout: disabled <7>[ 48.776618] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:542:HDMI-A-2] hw state readout: disabled <7>[ 48.776786] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:546:DP-3] hw state readout: disabled <7>[ 48.776951] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:555:DP-4] hw state readout: disabled <7>[ 48.777324] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 256910 kHz <7>[ 48.777482] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:63:plane 2A] min_cdclk 0 kHz <7>[ 48.777629] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 3A] min_cdclk 0 kHz <7>[ 48.777772] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:123:plane 4A] min_cdclk 0 kHz <7>[ 48.777917] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 5A] min_cdclk 0 kHz <7>[ 48.778074] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:143:cursor A] min_cdclk 0 kHz <7>[ 48.778234] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:149:pipe A] min_cdclk 256910 kHz <7>[ 48.778389] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 1B] min_cdclk 0 kHz <7>[ 48.778536] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:181:plane 2B] min_cdclk 0 kHz <7>[ 48.778674] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 3B] min_cdclk 0 kHz <7>[ 48.778813] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:241:plane 4B] min_cdclk 0 kHz <7>[ 48.778954] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:251:plane 5B] min_cdclk 0 kHz <7>[ 48.779107] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:261:cursor B] min_cdclk 0 kHz <7>[ 48.779255] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:267:pipe B] min_cdclk 0 kHz <7>[ 48.779402] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:269:plane 1C] min_cdclk 0 kHz <7>[ 48.779549] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:299:plane 2C] min_cdclk 0 kHz <7>[ 48.779692] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:329:plane 3C] min_cdclk 0 kHz <7>[ 48.779833] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:359:plane 4C] min_cdclk 0 kHz <7>[ 48.779985] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:369:plane 5C] min_cdclk 0 kHz <7>[ 48.780139] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:379:cursor C] min_cdclk 0 kHz <7>[ 48.780288] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:385:pipe C] min_cdclk 0 kHz <7>[ 48.780434] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:387:plane 1D] min_cdclk 0 kHz <7>[ 48.780578] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:417:plane 2D] min_cdclk 0 kHz <7>[ 48.780722] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:447:plane 3D] min_cdclk 0 kHz <7>[ 48.780863] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:477:plane 4D] min_cdclk 0 kHz <7>[ 48.781014] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:487:plane 5D] min_cdclk 0 kHz <7>[ 48.781165] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:497:cursor D] min_cdclk 0 kHz <7>[ 48.781304] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:503:pipe D] min_cdclk 0 kHz <7>[ 48.781645] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:149:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 48.781797] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:267:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 48.781947] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:385:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 48.782112] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:503:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 48.782263] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe A data rate 2055280 num active planes 1 <7>[ 48.782426] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe B data rate 0 num active planes 0 <7>[ 48.782582] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe C data rate 0 num active planes 0 <7>[ 48.782734] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe D data rate 0 num active planes 0 <7>[ 48.782962] i915 0000:00:02.0: [drm:intel_cmtg_sanitize [i915]] CMTG readout: CMTG A: enabled, CMTG B: n/a, Transcoder A secondary: yes, Transcoder B secondary: no <7>[ 48.783333] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:149:pipe A] enable: yes [setup_hw_state] <7>[ 48.783495] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 48.783651] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 48.783804] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 48.783953] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 48.784122] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7>[ 48.784276] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 48.784425] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 623587, link_n: 524288, tu: 64 <7>[ 48.784574] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 48.784723] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7>[ 48.784870] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7>[ 48.785033] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7>[ 48.785185] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7>[ 48.785331] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 48.785479] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7>[ 48.785625] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7>[ 48.785771] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7>[ 48.785918] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7>[ 48.786072] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 48.786226] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 48.786378] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 48.786526] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 48.786670] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 48.786815] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 513820, min cdclk 256910 <7>[ 48.786960] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 48.787115] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 48.787261] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 48.787407] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 48.787552] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 48.787697] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: clock: 432000, fracen: no, <7>[ 48.787841] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 225, tx_clk_div: 1. <7>[ 48.787991] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state: <7>[ 48.788144] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21 <7>[ 48.788294] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 48.788440] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 48.788584] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 48.788728] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 48.788875] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 48.789037] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 48.789190] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 48.789339] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 48.789485] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 48.789632] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 48.789777] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 48.789919] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 48.790079] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 48.790226] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 48.790371] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 48.790515] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 48.790660] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 48.790804] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 48.790946] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:267:pipe B] enable: no [setup_hw_state] <7>[ 48.791106] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:385:pipe C] enable: no [setup_hw_state] <7>[ 48.791259] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:503:pipe D] enable: no [setup_hw_state] <7>[ 48.791407] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] TBT PLL enabled but not in use, disabling <7>[ 48.791773] i915 0000:00:02.0: [drm:skl_get_initial_plane_config [i915]] [CRTC:149:pipe A][PLANE:33:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800 <7>[ 48.791942] i915 0000:00:02.0: [drm:intel_initial_plane_config [i915]] Using dma_addr=0x0000000000800000, based on initial plane programming <7>[ 48.792130] i915 0000:00:02.0: [drm:_i915_gem_object_stolen_init [i915]] creating preallocated stolen object: stolen_offset=0x0000000000000000, size=0x00000000013c7000 <7>[ 48.792645] i915 0000:00:02.0: [drm:intel_initial_plane_config [i915]] Initial plane fb bound to 0x0 in the ggtt (original 0xfec00000) <7>[ 48.803201] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [2048K, 832K) <7>[ 48.809787] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [1040K, 832K) <7>[ 48.809954] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [13c7000, fee00000] <7>[ 48.810132] i915 0000:00:02.0: [drm:nop_init_clock_gating [i915]] No clock gating settings or workarounds applied. <7>[ 48.810285] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: L3BANK steering: group=0x0, instance=0x0 <7>[ 48.810438] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: DSS steering: group=0x0, instance=0x0 <7>[ 48.810583] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: INSTANCE 0 steering: group=0x0, instance=0x0 <7>[ 48.810734] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7>[ 48.813180] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 7 engine workarounds on rcs'0 <7>[ 48.813348] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 whitelist workarounds on rcs'0 <7>[ 48.813505] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 7 context workarounds on rcs'0 <7>[ 48.814432] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 engine workarounds on bcs'0 <7>[ 48.814599] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 context workarounds on bcs'0 <7>[ 48.815268] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 engine workarounds on ccs'0 <7>[ 48.815428] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 context workarounds on ccs'0 <7>[ 48.816690] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 48.816877] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 24 ext-regs. <7>[ 48.817070] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7>[ 48.838681] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0x13c804f <7>[ 48.838859] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x410800 <7>[ 48.839029] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4 <7>[ 48.839186] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7>[ 48.839337] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x2f92 <7>[ 48.839484] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x7d550008 <7>[ 48.839629] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7>[ 48.839773] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7>[ 48.839916] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7>[ 48.840076] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7>[ 48.840230] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7>[ 48.840376] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7>[ 48.840520] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7>[ 48.840666] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <6>[ 48.841538] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/mtl_guc_70.bin version 70.53.0 <7>[ 48.851188] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 8ms, freq = 1700MHz -> 2000MHz vs 2200MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 48.852063] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6>[ 48.853578] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6>[ 48.853581] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <6>[ 48.854034] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled <7>[ 48.854321] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT0: GUC: Querying HW config table: size = 0, offset = 0x00000000 <7>[ 48.855025] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT0: GUC: Querying HW config table: size = 752, offset = 0x01FFC000 <7>[ 48.862342] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: OADDRM steering: group=0x0, instance=0x0 <7>[ 48.862515] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 5 GT workarounds on global <7>[ 48.863700] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'0 <7>[ 48.863869] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'0 <7>[ 48.864755] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'2 <7>[ 48.864907] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'2 <7>[ 48.865566] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vecs'0 <7>[ 48.865713] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vecs'0 <7>[ 48.866615] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on other'6 <7>[ 48.866767] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on other'6 <7>[ 48.868861] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT1: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 48.869060] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT1: GUC: capture found 24 ext-regs. <7>[ 48.869235] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT1: GUC: Used 4 KB for temporary ADS regset <7>[ 48.892027] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 0] = 0x1ffd04f <7>[ 48.892199] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 1] = 0x400000 <7>[ 48.892351] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 2] = 0x4 <7>[ 48.892501] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 3] = 0x3 <7>[ 48.892646] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 4] = 0x47fc <7>[ 48.892789] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 5] = 0x7d550008 <7>[ 48.892929] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 6] = 0x0 <7>[ 48.893253] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 7] = 0x0 <7>[ 48.893415] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 8] = 0x0 <7>[ 48.893562] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 9] = 0x0 <7>[ 48.893706] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[10] = 0x0 <7>[ 48.893848] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[11] = 0x0 <7>[ 48.894002] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[12] = 0x0 <7>[ 48.894152] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[13] = 0x0 <7>[ 48.894297] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT1: HuC: loaded by GSC = no <7>[ 48.897518] i915 0000:00:02.0: [drm:i915_gsc_proxy_component_bind [i915]] GT1: GSC proxy mei component bound <6>[ 48.897691] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops i915_gsc_proxy_component_ops [i915]) <6>[ 48.898093] i915 0000:00:02.0: [drm] GT1: GuC firmware i915/mtl_guc_70.bin version 70.53.0 <6>[ 48.898097] i915 0000:00:02.0: [drm] GT1: HuC firmware i915/mtl_huc_gsc.bin version 8.5.4 <7>[ 48.912040] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT1: GUC: init took 12ms, freq = 1050MHz -> 1300MHz vs 1300MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 48.912306] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled <7>[ 48.921045] i915 0000:00:02.0: [drm:intel_huc_wait_for_auth_complete [i915]] GT1: HuC: auth took 8ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x0000C1DC, count = 0, ret = 0 <6>[ 48.921202] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for clear media <6>[ 48.922100] i915 0000:00:02.0: [drm] GT1: GUC: submission enabled <6>[ 48.922101] i915 0000:00:02.0: [drm] GT1: GUC: SLPC enabled <6>[ 48.922284] i915 0000:00:02.0: [drm] GT1: GUC: RC enabled <7>[ 48.922500] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT1: GUC: Querying HW config table: size = 0, offset = 0x00000000 <7>[ 48.923660] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT1: GUC: Querying HW config table: size = 752, offset = 0xFEDD1000 <7>[ 48.931658] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7>[ 48.931968] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7>[ 48.932281] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7>[ 48.932558] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'2 to vcs1 <7>[ 48.932821] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7>[ 48.933060] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed ccs'0 to ccs0 <7>[ 48.933232] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed other'6 to other0 <6>[ 48.935290] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized <7>[ 48.936797] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:149:pipe A] FQ 0: start 0x90008 <7>[ 48.936984] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:149:pipe A] FQ 1: start 0x90108 <7>[ 48.937159] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:149:pipe A] FQ 2: start 0x90208 <7>[ 48.937319] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:149:pipe A] FQ 3: start 0x90308 <7>[ 48.937475] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:149:pipe A] FQ 4: start 0x903c8 <7>[ 48.937629] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:267:pipe B] FQ 0: start 0x98008 <7>[ 48.937785] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:267:pipe B] FQ 1: start 0x98108 <7>[ 48.937936] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:267:pipe B] FQ 2: start 0x98208 <7>[ 48.938112] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:267:pipe B] FQ 3: start 0x98308 <7>[ 48.938269] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:267:pipe B] FQ 4: start 0x983c8 <7>[ 48.938416] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:385:pipe C] FQ 0: start 0x52008 <7>[ 48.938567] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:385:pipe C] FQ 1: start 0x52108 <7>[ 48.938715] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:385:pipe C] FQ 2: start 0x52208 <7>[ 48.938867] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:385:pipe C] FQ 3: start 0x52308 <7>[ 48.939039] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:385:pipe C] FQ 4: start 0x523c8 <7>[ 48.939196] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:503:pipe D] FQ 0: start 0x59008 <7>[ 48.939348] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:503:pipe D] FQ 1: start 0x59108 <7>[ 48.939499] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:503:pipe D] FQ 2: start 0x59208 <7>[ 48.939652] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:503:pipe D] FQ 3: start 0x59308 <7>[ 48.939803] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:503:pipe D] FQ 4: start 0x593c8 <7>[ 48.940266] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 48.940428] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:149:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 48.940593] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 2048) -> ( 0 - 4001), size 2048 -> 4001 <7>[ 48.940753] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95 <7>[ 48.940909] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm <7>[ 48.941072] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 2, 2, 2, 2, 2, 2, 0, 0, 1, 3, 1 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 <7>[ 48.941228] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 49, 49, 49, 49, 49, 49, 0, 0, 7, 73, 7 -> 49, 385, 385, 457, 457, 673, 0, 0, 0, 73, 0 <7>[ 48.941382] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 0, 82, 0 <7>[ 48.941576] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:267:pipe B] enable: no [fastset] <7>[ 48.941750] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:385:pipe C] enable: no [fastset] <7>[ 48.941915] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:503:pipe D] enable: no [fastset] <7>[ 48.945086] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 42393600 bytes of contiguous stolen space for FBC, limit: 1 <7>[ 48.945269] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:33:plane 1A] <7>[ 48.945490] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: no -> yes (pipe: A) <7>[ 48.945675] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 4 (mbus joined: yes) <7>[ 48.956634] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:267:pipe B] <7>[ 48.957077] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:385:pipe C] <7>[ 48.957426] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:503:pipe D] <7>[ 48.963494] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:506:eDP-1] adding connector to sysfs <7>[ 48.966150] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:506:eDP-1] backlight device intel_backlight registered <7>[ 48.966357] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:506:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7>[ 48.966543] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:506:eDP-1] Panel prepare <7>[ 48.966943] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 48.968293] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:506:eDP-1] generating connector hotplug event <7>[ 48.968363] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:515:DP-1] adding connector to sysfs <7>[ 48.968737] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7>[ 48.969491] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:515:DP-1] generating connector hotplug event <7>[ 48.969529] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:527:HDMI-A-1] adding connector to sysfs <7>[ 48.969830] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:527:HDMI-A-1] generating connector hotplug event <7>[ 48.969859] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:533:DP-2] adding connector to sysfs <7>[ 48.970336] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2 <7>[ 48.970950] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:533:DP-2] generating connector hotplug event <7>[ 48.970991] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:542:HDMI-A-2] adding connector to sysfs <7>[ 48.971306] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:542:HDMI-A-2] generating connector hotplug event <7>[ 48.971338] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:546:DP-3] adding connector to sysfs <7>[ 48.971715] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 48.972549] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:546:DP-3] generating connector hotplug event <7>[ 48.972591] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:555:DP-4] adding connector to sysfs <7>[ 48.972968] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY TC4 bus for card0-DP-4 <7>[ 48.973855] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:555:DP-4] generating connector hotplug event <6>[ 48.973884] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7>[ 48.976350] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected <6>[ 48.988505] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 48.991662] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 <7>[ 48.992773] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 48.993005] i915 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [i915]] aud_ts_cdclk set to M=60, N=768 <7>[ 48.994167] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 48.994176] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7>[ 48.994724] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:515:DP-1] <7>[ 48.995069] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] found possible fb from [PLANE:33:plane 1A] <7>[ 48.995345] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:267:pipe B] not active, skipping <7>[ 48.995595] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:385:pipe C] not active, skipping <7>[ 48.995828] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:503:pipe D] not active, skipping <7>[ 48.996165] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] checking [PLANE:33:plane 1A] for BIOS fb <7>[ 48.996384] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:149:pipe A] area: 2880x1800, bpp: 32, size: 20736000 <7>[ 48.996597] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] fb big enough [PLANE:33:plane 1A] (20738048 >= 20736000) <7>[ 48.996808] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:267:pipe B] not active, skipping <7>[ 48.997027] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:385:pipe C] not active, skipping <7>[ 48.997240] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:503:pipe D] not active, skipping <7>[ 48.997451] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] using BIOS fb for initial console <7>[ 48.997819] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 48.999100] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:515:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 48.999300] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1] <7>[ 49.000344] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 49.003581] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:527:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 49.003753] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:533:DP-2] <7>[ 49.004966] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 49.005250] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:533:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 49.005442] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:542:HDMI-A-2] <7>[ 49.005826] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7>[ 49.010130] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:542:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 49.010292] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:546:DP-3] <7>[ 49.010550] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 49.010780] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:546:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 49.010938] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:555:DP-4] <7>[ 49.011218] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 49.011464] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:555:DP-4] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 49.011657] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 49.011987] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] <6>[ 49.011921] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7>[ 49.012004] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:506:eDP-1] <7>[ 49.012808] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 49.013537] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 49.014258] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 49.014537] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 49.014782] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 49.015139] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 49.015147] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD monitor <7>[ 49.015153] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD size 20, SAD count 0 <7>[ 49.015188] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] VRR capable: no <7>[ 49.015429] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 49.015650] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 49.016764] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] status updated from unknown to connected <7>[ 49.017152] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 49.017630] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] probed modes: <7>[ 49.017639] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 49.017646] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:DP-1] <7>[ 49.017651] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:515:DP-1] <7>[ 49.018245] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9a01 <7>[ 49.019216] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7>[ 49.019252] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7>[ 49.022024] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:DP-1] disconnected <7>[ 49.022033] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] <7>[ 49.022038] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1] <7>[ 49.026433] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected <7>[ 49.026441] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] <7>[ 49.026445] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:533:DP-2] <7>[ 49.027021] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] disconnected <7>[ 49.027027] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-2] <7>[ 49.027032] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:542:HDMI-A-2] <7>[ 49.031532] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-2] disconnected <7>[ 49.031542] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:546:DP-3] <7>[ 49.031547] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:546:DP-3] <7>[ 49.031935] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:546:DP-3] disconnected <7>[ 49.031941] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:555:DP-4] <7>[ 49.031944] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:555:DP-4] <7>[ 49.032357] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:555:DP-4] disconnected <7>[ 49.032362] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:eDP-1] enabled? yes <7>[ 49.032366] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:515:DP-1] enabled? no <7>[ 49.032370] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:527:HDMI-A-1] enabled? no <7>[ 49.032373] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:DP-2] enabled? no <7>[ 49.032376] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:HDMI-A-2] enabled? no <7>[ 49.032379] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:546:DP-3] enabled? no <7>[ 49.032381] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:555:DP-4] enabled? no <7>[ 49.032544] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 49.032566] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:eDP-1] found preferred mode: 2880x1800 <7>[ 49.032570] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 49.032586] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7>[ 49.032847] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7>[ 49.032872] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] re-using BIOS fb <7>[ 49.033198] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 2880x1800 fb: 0x00000000 <6>[ 49.034532] fbcon: i915drmfb (fb0) is primary device <7>[ 49.035914] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:506:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 49.036150] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:505:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 max link_bpp 30.0000 <7>[ 49.036331] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 link rate required 1926825 available 2160000 <7>[ 49.036515] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 49.036694] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:505:DDI A/PHY A] [CRTC:149:pipe A] <7>[ 49.036867] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 623587/524288, found tu 64, data 7483046/8388608 link 498869/524288) <7>[ 49.037089] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in dpll_hw_state <7>[ 49.037264] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7>[ 49.037433] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 49.037598] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_hw_state: clock: 432000, fracen: no, <7>[ 49.037756] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] multiplier: 225, tx_clk_div: 1. <7>[ 49.037913] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_rawhw_state: <7>[ 49.038087] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] tx: 0x10, cmn: 0x21 <7>[ 49.038244] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 49.038408] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 49.038577] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 49.038739] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 49.038899] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 49.039078] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7>[ 49.039237] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 49.039391] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_hw_state: clock: 540000, fracen: yes, <7>[ 49.039549] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] quot: 40960, rem: 0, den: 1, <7>[ 49.039705] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 49.039860] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_rawhw_state: <7>[ 49.040042] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] tx: 0x10, cmn: 0x21 <7>[ 49.040217] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 49.040395] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 49.040558] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 49.040710] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 49.040876] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 49.041046] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 49.041221] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 432000, found 540000) <7>[ 49.041404] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in set_context_latency (expected 0, found 1) <7>[ 49.041578] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7>[ 49.041751] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:149:pipe A] releasing DPLL 0 <7>[ 49.041979] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 49.042170] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 <7>[ 49.042340] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 0, 73, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 <7>[ 49.042514] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 0, 82, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 <7>[ 49.042705] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:63:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 49.042878] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:63:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.043057] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:63:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.043225] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:63:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.043390] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:93:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 49.043551] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:93:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.043717] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:93:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.043901] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:93:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.044094] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 49.044275] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:123:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.044449] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:123:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.044613] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.044787] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:133:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 49.044963] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:133:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.045229] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:133:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.045406] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:133:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.045566] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:143:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 49.045712] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:143:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.045857] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:143:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.046065] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:143:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.046449] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200 <7>[ 49.046640] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 49.046845] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 49.047043] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 49.047217] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159 <7>[ 49.047452] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:149:pipe A] allocated DPLL 0 <7>[ 49.047649] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:149:pipe A] reserving DPLL 0 <7>[ 49.047839] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:149:pipe A] enable: yes [modeset] <7>[ 49.048037] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 49.048216] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 49.048396] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 49.048584] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 49.048768] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7>[ 49.048941] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 49.049123] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 49.049282] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 49.049442] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7>[ 49.049616] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7>[ 49.049789] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7>[ 49.049960] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7>[ 49.050136] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 49.050330] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 4, length 14 <7>[ 49.050518] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7>[ 49.050680] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7>[ 49.050832] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7>[ 49.050987] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7>[ 49.051140] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7>[ 49.051321] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7>[ 49.051508] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 1 <7>[ 49.051681] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1878, vmax: 1878, flipline: 1878, pipeline full: 0, guardband: 76 vsync start: 75, vsync end: 69 <7>[ 49.051838] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1878, vmax vtotal: 1878 <7>[ 49.052000] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 49.052166] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 49.052339] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 49.052517] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 49.052697] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 49.052861] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820, min cdclk 256910 <7>[ 49.053025] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 49.053188] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 49.053362] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 49.053530] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 49.053700] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 49.053868] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: clock: 540000, fracen: yes, <7>[ 49.054059] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] quot: 40960, rem: 0, den: 1, <7>[ 49.054224] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 49.054374] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state: <7>[ 49.054526] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21 <7>[ 49.054678] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 49.054828] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 49.054985] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 49.055143] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 49.055318] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 49.055492] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 49.055664] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 49.055833] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 49.056001] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 49.056163] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 49.056325] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 49.056488] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 49.056652] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 49.056817] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 49.056985] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 49.057140] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 49.057315] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 49.057491] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 49.057644] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:564] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 49.057798] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 49.057950] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 49.058122] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7>[ 49.058277] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7>[ 49.058432] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7>[ 49.058586] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7>[ 49.058740] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7>[ 49.068271] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7>[ 49.074360] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 49.074709] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 49.074965] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 49.075222] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 49.075468] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 49.075702] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 49.075926] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 49.076154] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 49.076377] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 49.076597] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 49.076816] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 49.077067] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 49.077353] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 49.077538] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 49.077695] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 49.077849] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 49.078014] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 49.078171] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 49.078350] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 49.078522] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 49.078679] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 49.078828] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 49.078982] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 49.079130] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 49.079276] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 49.079422] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 49.079567] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 49.079712] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 49.079857] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 49.080038] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <6>[ 49.080121] i915 0000:00:02.0: [drm] GT1: Loaded GSC firmware i915/mtl_gsc_1.bin (cv1.0, r102.1.15.1926, svn 1) <7>[ 49.080195] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 49.080350] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 49.080509] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 49.080667] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 49.080818] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 49.080964] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <6>[ 49.087560] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 49.089210] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <6>[ 49.090201] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 <6>[ 49.091019] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <7>[ 49.100887] i915 0000:00:02.0: [drm:intel_huc_wait_for_auth_complete [i915]] GT1: HuC: auth took 0ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x00116C68, count = 0, ret = 0 <6>[ 49.101103] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for all workloads <7>[ 49.271283] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:506:eDP-1] set backlight PWM = 0 <7>[ 49.272436] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7>[ 49.281238] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000 <7>[ 49.281375] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 turn panel power off <7>[ 49.281841] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:505:DDI A/PHY A] - short <7>[ 49.281961] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 49.282392] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 49.334325] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7>[ 49.334950] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:505:DDI A/PHY A] - long <7>[ 49.335510] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7>[ 49.337169] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 49.338177] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A] <7>[ 49.338531] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:505:DDI A/PHY A] <7>[ 49.339119] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:505:DDI A/PHY A] <7>[ 49.340028] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7>[ 49.340735] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7>[ 49.341556] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:33:plane 1A] <7>[ 49.341910] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0xffff0072 0x13421c72) <7>[ 49.342247] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:505:DDI A/PHY A] <7>[ 49.342498] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:514:DDI B/PHY B] <7>[ 49.342737] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:516:DP-MST A] <7>[ 49.342989] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:517:DP-MST B] <7>[ 49.343239] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:518:DP-MST C] <7>[ 49.343406] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:519:DP-MST D] <7>[ 49.343560] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:532:DDI TC1/PHY TC1] <7>[ 49.343711] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:534:DP-MST A] <7>[ 49.343857] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:535:DP-MST B] <7>[ 49.344026] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:536:DP-MST C] <7>[ 49.344175] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:537:DP-MST D] <7>[ 49.344323] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:541:DDI TC2/PHY TC2] <7>[ 49.344467] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:545:DDI TC3/PHY TC3] <7>[ 49.344613] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:547:DP-MST A] <7>[ 49.344756] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:548:DP-MST B] <7>[ 49.344901] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:549:DP-MST C] <7>[ 49.345085] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:550:DP-MST D] <7>[ 49.345245] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:554:DDI TC4/PHY TC4] <7>[ 49.345393] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:556:DP-MST A] <7>[ 49.345538] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:557:DP-MST B] <7>[ 49.345684] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:558:DP-MST C] <7>[ 49.345830] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:559:DP-MST D] <7>[ 49.346091] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 49.347005] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A] <7>[ 49.347190] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7>[ 49.348808] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 turn panel power on <7>[ 49.349022] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 wait for panel power cycle (489 ms remaining) <7>[ 49.564235] i915 0000:00:02.0: [drm:gsc_work [i915]] GT1: GSC Proxy initialized <7>[ 49.847526] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7>[ 49.858331] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 49.859005] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 49.859611] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 49.891524] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7>[ 49.892168] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:505:DDI A/PHY A] - long <7>[ 49.892733] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20 <7>[ 49.893303] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:505:DDI A/PHY A] <7>[ 50.042289] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 50.042312] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 50.042324] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4 <7>[ 50.042297] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 50.063734] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 50.064680] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 turning VDD on <7>[ 50.065348] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 50.068625] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 50.069565] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:506:eDP-1][ENCODER:505:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 50.070389] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:506:eDP-1][ENCODER:505:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07 <7>[ 50.071453] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:506:eDP-1][ENCODER:505:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 50.072197] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:506:eDP-1][ENCODER:505:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 50.073181] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:506:eDP-1][ENCODER:505:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 50.073323] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:506:eDP-1][ENCODER:505:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7>[ 50.074709] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:506:eDP-1][ENCODER:505:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 50.074851] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:506:eDP-1][ENCODER:505:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7>[ 50.075515] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7>[ 50.075803] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7>[ 50.075952] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7>[ 50.076173] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:506:eDP-1] set backlight PWM = 192000 <7>[ 50.087061] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2 <7>[ 50.088853] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:506:eDP-1] <7>[ 50.089126] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:149:pipe A] <7>[ 50.090593] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 50.091958] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0x2000071 0x13421c72) <6>[ 50.092943] Console: switching to colour frame buffer device 180x56 <7>[ 50.092792] i915 0000:00:02.0: [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=9600/192000 <7>[ 50.093500] i915 0000:00:02.0: [drm:intel_panel_actually_set_backlight [i915]] [CONNECTOR:506:eDP-1] set backlight level = 13892 <6>[ 50.121602] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7>[ 50.121612] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 14 <7>[ 50.121790] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: C0 <7>[ 50.121949] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7>[ 50.122128] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: yes <7>[ 50.122287] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: yes <7>[ 50.122441] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7>[ 50.122592] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7>[ 50.122743] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: yes <7>[ 50.122894] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7>[ 50.123069] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7>[ 50.123229] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7>[ 50.123383] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7>[ 50.123535] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7>[ 50.123686] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7>[ 50.123836] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7>[ 50.124000] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: no <7>[ 50.124155] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7>[ 50.124310] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7>[ 50.124468] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7>[ 50.124620] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7>[ 50.124771] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: yes <7>[ 50.124921] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 38400 kHz <7>[ 50.125531] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7>[ 50.125705] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D <7>[ 50.126034] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C <7>[ 50.126244] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B <7>[ 50.126513] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x7d55 rev=0x08 platform=METEORLAKE (subplatform=0x0) gen=12 <7>[ 50.126658] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 12.71 <7>[ 50.126795] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 13 <7>[ 50.126926] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: B0 <7>[ 50.127079] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: C0 <7>[ 50.127208] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 0 <7>[ 50.127333] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x41 <7>[ 50.127456] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x211000 <7>[ 50.127577] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: METEORLAKE <7>[ 50.127698] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7>[ 50.127821] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7>[ 50.127943] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 46 <7>[ 50.128093] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7>[ 50.128214] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7>[ 50.128338] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7>[ 50.128459] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7>[ 50.128583] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7>[ 50.128703] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7>[ 50.128822] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7>[ 50.128940] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7>[ 50.129078] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7>[ 50.129198] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: yes <7>[ 50.129317] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: yes <7>[ 50.129435] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7>[ 50.129553] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7>[ 50.129673] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7>[ 50.129791] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: yes <7>[ 50.129910] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: yes <7>[ 50.130046] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7>[ 50.130166] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7>[ 50.130285] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: no <7>[ 50.130403] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7>[ 50.130523] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: yes <7>[ 50.130642] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7>[ 50.130761] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7>[ 50.130880] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: yes <7>[ 50.131025] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: yes <7>[ 50.131154] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: yes <7>[ 50.131277] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7>[ 50.131398] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: yes <7>[ 50.131519] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7>[ 50.131640] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7>[ 50.131762] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7>[ 50.131890] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7>[ 50.132027] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: yes <7>[ 50.132154] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: no <7>[ 50.132272] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7>[ 50.132389] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7>[ 50.132509] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7>[ 50.132665] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7>[ 50.132843] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7>[ 50.133006] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 400003 <7>[ 50.133139] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 8 <7>[ 50.133259] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: geometry dss mask=00000000,000000ff <7>[ 50.133378] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: compute dss mask=00000000,000000ff <7>[ 50.133496] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 128 <7>[ 50.133611] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 16 <7>[ 50.133728] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7>[ 50.133847] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7>[ 50.133966] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: no <7>[ 50.134113] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 4041400 <7>[ 50.134240] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 8 <7>[ 50.134363] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: geometry dss mask=00000000,0000ff00 <7>[ 50.134485] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: compute dss mask=00000000,0000ff00 <7>[ 50.134603] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 128 <7>[ 50.134722] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 16 <7>[ 50.134841] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7>[ 50.134961] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7>[ 50.135101] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: no <6>[ 50.135224] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6>[ 50.135225] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6>[ 50.135225] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7>[ 50.142665] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 50.142676] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 50.142896] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] <7>[ 50.142904] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:506:eDP-1] <7>[ 50.143676] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 50.144101] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 50.144233] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 50.144363] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 50.144571] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 50.144575] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD monitor <7>[ 50.144582] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD size 20, SAD count 0 <7>[ 50.144601] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] VRR capable: no <7>[ 50.144729] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 50.144856] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 50.145703] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] probed modes: <7>[ 50.145711] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 50.145714] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:DP-1] <7>[ 50.145717] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:515:DP-1] <7>[ 50.150038] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:DP-1] disconnected <7>[ 50.150044] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] <7>[ 50.150048] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1] <7>[ 50.154358] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected <7>[ 50.154364] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] <7>[ 50.154367] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:533:DP-2] <7>[ 50.154713] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 50.154937] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] disconnected <7>[ 50.154942] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-2] <7>[ 50.154944] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:542:HDMI-A-2] <7>[ 50.155291] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7>[ 50.159562] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-2] disconnected <7>[ 50.159566] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:546:DP-3] <7>[ 50.159570] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:546:DP-3] <7>[ 50.159807] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 50.160034] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:546:DP-3] disconnected <7>[ 50.160038] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:555:DP-4] <7>[ 50.160041] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:555:DP-4] <7>[ 50.160275] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 50.160479] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:555:DP-4] disconnected <7>[ 50.160482] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:eDP-1] enabled? yes <7>[ 50.160485] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:515:DP-1] enabled? no <7>[ 50.160487] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:527:HDMI-A-1] enabled? no <7>[ 50.160489] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:DP-2] enabled? no <7>[ 50.160491] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:HDMI-A-2] enabled? no <7>[ 50.160492] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:546:DP-3] enabled? no <7>[ 50.160494] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:555:DP-4] enabled? no <7>[ 50.160592] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 50.160614] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:eDP-1] found preferred mode: 2880x1800 <7>[ 50.160616] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 50.160644] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7>[ 50.165116] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 50.176041] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 50.176065] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 50.176754] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] <7>[ 50.176776] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:506:eDP-1] <7>[ 50.178355] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 50.179207] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 50.179695] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 50.179640] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 50.180019] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 50.180375] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 50.180381] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD monitor <7>[ 50.180402] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD size 20, SAD count 0 <7>[ 50.180454] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] VRR capable: no <7>[ 50.180637] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 50.180818] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 50.182512] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] probed modes: <7>[ 50.182534] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 50.182540] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:DP-1] <7>[ 50.182544] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:515:DP-1] <7>[ 50.183217] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c] <7>[ 50.186856] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:DP-1] disconnected <7>[ 50.186863] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] <7>[ 50.186867] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1] <7>[ 50.191214] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected <7>[ 50.191219] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] <7>[ 50.191222] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:533:DP-2] <7>[ 50.191685] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] disconnected <7>[ 50.191690] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-2] <7>[ 50.191693] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:542:HDMI-A-2] <7>[ 50.196123] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-2] disconnected <7>[ 50.196128] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:546:DP-3] <7>[ 50.196132] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:546:DP-3] <7>[ 50.196486] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:546:DP-3] disconnected <7>[ 50.196490] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:555:DP-4] <7>[ 50.196494] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:555:DP-4] <7>[ 50.196840] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:555:DP-4] disconnected <7>[ 50.196843] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:eDP-1] enabled? yes <7>[ 50.196851] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:515:DP-1] enabled? no <7>[ 50.196854] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:527:HDMI-A-1] enabled? no <7>[ 50.196857] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:DP-2] enabled? no <7>[ 50.196859] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:HDMI-A-2] enabled? no <7>[ 50.196862] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:546:DP-3] enabled? no <7>[ 50.196864] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:555:DP-4] enabled? no <7>[ 50.196996] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 50.197017] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:eDP-1] found preferred mode: 2880x1800 <7>[ 50.197021] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 50.197058] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7>[ 50.197216] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 50.209858] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 50.209938] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 50.221577] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509 <7>[ 50.253775] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 50.253849] [IGT] i915_module_load: finished subtest load, SUCCESS <7>[ 50.254106] [IGT] i915_module_load: exiting, ret=0 <7>[ 50.344471] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 51.255069] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.255129] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.255470] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.256168] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4 <7>[ 52.729543] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 turning VDD off <7>[ 52.730487] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 <7>[ 52.730801] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 52.731934] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 52.732435] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02