Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Duration 0.02 seconds
Igt-Version 
IGT-Version: 2.2-g46d3dad03 (x86_64) (Linux: 6.18.0-rc7-CI_DRM_17596-g943d0e69375e+ x86_64)
Out 
Using IGT_SRANDOM=1764257111 for randomisation
Opened device: /dev/dri/card1
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.024s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.024s)
Dmesg
<6> [262.779027] Console: switching to colour dummy device 80x25
<6> [262.779928] [IGT] kms_force_connector_basic: executing
<7> [263.028668] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [263.030050] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [263.030539] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [263.031381] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:71:VGA-1] force updated from 0 to 0 or reprobing
<7> [263.031393] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1]
<7> [263.031402] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:71:VGA-1] force=1
<7> [263.031770] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [263.032063] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [263.032639] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [263.033056] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [263.033636] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [263.034039] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [263.034051] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [263.034454] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [263.036264] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [263.036275] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [263.036716] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [263.037116] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1] disconnected
<7> [263.037208] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1]
<7> [263.037218] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:71:VGA-1] force=1
<7> [263.037639] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [263.038040] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [263.038627] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [263.039023] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [263.039565] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [263.039993] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [263.040003] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [263.040407] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [263.042152] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [263.042162] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [263.042540] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [263.043015] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1] disconnected
<7> [263.043181] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1]
<7> [263.043192] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:71:VGA-1] force=1
<7> [263.043605] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [263.044018] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [263.044581] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [263.044995] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [263.045588] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [263.045931] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [263.045939] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [263.046205] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [263.047512] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [263.047520] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [263.047830] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [263.048152] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1] disconnected
<6> [263.049051] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [263.049553] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:71:VGA-1] force updated from 0 to 2 or reprobing
<7> [263.049566] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1]
<7> [263.049576] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1] status updated from disconnected to connected
<7> [263.049608] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [263.049751] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [263.049875] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [263.050293] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [263.050747] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [263.051034] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [263.051052] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [263.051318] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [263.052705] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [263.052721] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [263.053074] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1] probed modes:
<7> [263.053082] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [263.053088] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [263.053095] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [263.053100] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [263.053106] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [263.053175] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1]
<7> [263.053364] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [263.053681] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [263.054246] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [263.054513] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [263.054528] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [263.054842] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [263.056224] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [263.056240] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [263.056602] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1] probed modes:
<7> [263.056640] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [263.056651] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [263.056661] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [263.056669] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [263.056678] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [263.057082] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:71:VGA-1] EDID override set
<7> [263.057118] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1]
<7> [263.057172] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:VGA-1] ELD monitor IGT
<7> [263.057178] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:VGA-1] ELD size 24, SAD count 0
<7> [263.057350] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [263.057361] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [263.057371] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1] probed modes:
<7> [263.057376] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [263.057381] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [263.057387] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [263.057393] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [263.057398] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [263.057403] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [263.057601] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:71:VGA-1] EDID override set
<7> [263.057715] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1]
<7> [263.057790] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:VGA-1] ELD monitor IGT
<7> [263.057799] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:VGA-1] ELD size 24, SAD count 0
<7> [263.057808] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:71:VGA-1] EDID changed, epoch counter 56
<7> [263.058067] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [263.058080] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1] probed modes:
<7> [263.058085] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [263.058091] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [263.058097] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [263.058102] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [263.058108] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [263.058279] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:71:VGA-1] EDID override reset
<7> [263.058316] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1]
<7> [263.058496] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [263.058830] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [263.059341] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [263.059633] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [263.059656] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [263.059974] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [263.061361] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [263.061380] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [263.061871] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [263.061894] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [263.061906] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1] probed modes:
<7> [263.061913] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [263.061919] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [263.061925] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [263.061930] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [263.061936] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [263.062240] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:71:VGA-1] force updated from 2 to 0 or reprobing
<7> [263.062249] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1]
<7> [263.062256] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:71:VGA-1] force=1
<7> [263.062542] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [263.062853] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [263.063392] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [263.063843] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [263.064287] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [263.064551] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [263.064558] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [263.064885] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [263.066222] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [263.066229] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [263.066493] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [263.066825] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1] status updated from connected to disconnected
<7> [263.066846] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1] disconnected
<7> [263.066867] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [263.066954] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:71:VGA-1] EDID changed, epoch counter 58
<7> [263.067010] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [263.067086] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1]
<7> [263.067094] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:71:VGA-1] force=1
<7> [263.067382] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [263.067747] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [263.068332] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [263.068774] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [263.069344] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [263.069801] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [263.069812] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [263.070217] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [263.071918] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [263.071930] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [263.072340] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [263.072835] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1] disconnected
<6> [263.074200] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [263.075400] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [263.076525] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:67:LVDS-1] force updated from 0 to 0 or reprobing
<7> [263.076541] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:67:LVDS-1]
<7> [263.076561] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:67:LVDS-1] ELD monitor
<7> [263.076571] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:67:LVDS-1] ELD size 20, SAD count 0
<7> [263.076713] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:67:LVDS-1] probed modes:
<7> [263.076724] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [263.076787] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:67:LVDS-1]
<7> [263.076800] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:67:LVDS-1] ELD monitor
<7> [263.076808] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:67:LVDS-1] ELD size 20, SAD count 0
<7> [263.076918] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:67:LVDS-1] probed modes:
<7> [263.076926] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [263.077187] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:67:LVDS-1] EDID override reset
<7> [263.077234] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:67:LVDS-1]
<7> [263.077247] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:67:LVDS-1] ELD monitor
<7> [263.077254] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:67:LVDS-1] ELD size 20, SAD count 0
<7> [263.077358] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:67:LVDS-1] probed modes:
<7> [263.077367] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [263.077663] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:71:VGA-1] force updated from 0 to 0 or reprobing
<7> [263.077672] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1]
<7> [263.077678] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:71:VGA-1] force=1
<7> [263.078049] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [263.078315] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [263.078745] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [263.079034] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [263.079463] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [263.079750] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [263.079761] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [263.080076] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [263.081684] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [263.081693] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [263.081964] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [263.082231] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1] disconnected
<7> [263.082303] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1]
<7> [263.082311] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:71:VGA-1] force=1
<7> [263.082584] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [263.082920] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [263.083410] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [263.083701] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [263.084165] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [263.084427] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [263.084433] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [263.084766] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [263.086111] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [263.086119] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [263.086384] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [263.086684] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1] disconnected
<7> [263.086948] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:71:VGA-1] EDID override reset
<7> [263.086982] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1]
<7> [263.086989] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:71:VGA-1] force=1
<7> [263.087268] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [263.087533] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [263.088026] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [263.088291] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [263.088730] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [263.089008] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [263.089015] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [263.089279] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [263.090606] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [263.090628] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [263.090896] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [263.091161] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1] disconnected
<7> [263.091459] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:74:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [263.091468] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:74:HDMI-A-1]
<7> [263.091475] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:74:HDMI-A-1]
<7> [263.143304] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [263.159678] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [263.159689] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [263.159961] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [263.175697] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [263.175706] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [263.175971] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:74:HDMI-A-1] disconnected
<7> [263.176052] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:74:HDMI-A-1]
<7> [263.176060] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:74:HDMI-A-1]
<7> [263.227712] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [263.243686] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [263.243695] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [263.243950] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [263.259674] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [263.259683] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [263.259980] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:74:HDMI-A-1] disconnected
<7> [263.260223] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:74:HDMI-A-1] EDID override reset
<7> [263.260259] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:74:HDMI-A-1]
<7> [263.260267] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:74:HDMI-A-1]
<7> [263.312230] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [263.328689] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [263.328703] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [263.328993] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [263.344687] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [263.344697] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [263.344967] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:74:HDMI-A-1] disconnected
<7> [263.345208] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:82:DP-1] EDID override reset
<7> [263.345241] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:82:DP-1]
<7> [263.345248] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:82:DP-1]
<7> [263.349562] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:82:DP-1] disconnected
<7> [263.350111] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:87:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [263.350125] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:87:HDMI-A-2]
<7> [263.350136] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:87:HDMI-A-2]
<7> [263.350748] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [263.351140] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [263.351687] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [263.352079] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [263.352088] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [263.352462] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [263.354279] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [263.354290] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [263.354727] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:87:HDMI-A-2] disconnected
<7> [263.354820] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:87:HDMI-A-2]
<7> [263.354831] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:87:HDMI-A-2]
<7> [263.355455] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [263.355784] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [263.356215] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [263.356478] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [263.356485] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [263.356771] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [263.358091] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [263.358099] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [263.358367] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:87:HDMI-A-2] disconnected
<7> [263.358601] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:87:HDMI-A-2] EDID override reset
<7> [263.358698] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:87:HDMI-A-2]
<7> [263.358710] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:87:HDMI-A-2]
<7> [263.359335] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [263.359783] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [263.360416] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [263.360837] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [263.360848] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [263.361234] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [263.362639] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [263.362648] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [263.362999] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:87:HDMI-A-2] disconnected
<7> [263.363333] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:91:HDMI-A-3] force updated from 0 to 0 or reprobing
<7> [263.363343] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-3]
<7> [263.363350] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:91:HDMI-A-3]
<7> [263.363837] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [263.364234] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [263.364816] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [263.365203] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [263.365212] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [263.365584] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [263.367401] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [263.367412] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [263.367856] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-3] disconnected
<7> [263.367953] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-3]
<7> [263.367965] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:91:HDMI-A-3]
<7> [263.368526] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [263.368982] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [263.369539] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [263.369960] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [263.369969] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [263.370356] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [263.372086] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [263.372096] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [263.372479] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-3] disconnected
<7> [263.372824] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:91:HDMI-A-3] EDID override reset
<7> [263.372875] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-3]
<7> [263.372886] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:91:HDMI-A-3]
<7> [263.373447] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [263.373895] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [263.374435] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [263.374860] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [263.374869] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [263.375262] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [263.377001] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [263.377011] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [263.377395] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-3] disconnected
<7> [263.377766] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:95:DP-2] EDID override reset
<7> [263.377824] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-2]
<7> [263.377835] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-2]
<7> [263.382264] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-2] disconnected
<7> [263.382568] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:99:DP-3] EDID override reset
<7> [263.382646] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:99:DP-3]
<7> [263.382657] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:99:DP-3]
<7> [263.387104] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:99:DP-3] disconnected
<6> [263.388983] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [263.389874] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [263.408068] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [263.408099] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [263.408342] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:67:LVDS-1]
<7> [263.408381] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:67:LVDS-1] ELD monitor
<7> [263.408399] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:67:LVDS-1] ELD size 20, SAD count 0
<7> [263.408698] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:67:LVDS-1] probed modes:
<7> [263.408728] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [263.408764] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1]
<7> [263.408796] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:71:VGA-1] force=1
<7> [263.409493] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [263.410495] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [263.411638] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [263.411932] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [263.412362] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [263.412681] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [263.412692] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [263.412981] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [263.414321] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [263.414329] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [263.414594] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [263.414920] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1] disconnected
<7> [263.414937] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:74:HDMI-A-1]
<7> [263.414948] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:74:HDMI-A-1]
<7> [263.466716] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [263.482687] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [263.482702] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [263.482984] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [263.498681] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [263.498690] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [263.498952] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:74:HDMI-A-1] disconnected
<7> [263.498963] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:82:DP-1]
<7> [263.498971] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:82:DP-1]
<7> [263.503274] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:82:DP-1] disconnected
<7> [263.503292] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:87:HDMI-A-2]
<7> [263.503303] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:87:HDMI-A-2]
<7> [263.503940] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [263.504527] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [263.505350] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [263.505703] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [263.505712] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [263.506004] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [263.507439] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [263.507447] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [263.507750] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:87:HDMI-A-2] disconnected
<7> [263.507764] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-3]
<7> [263.507774] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:91:HDMI-A-3]
<7> [263.508277] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [263.508540] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [263.508994] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [263.509264] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [263.509270] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [263.509557] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [263.510987] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [263.510996] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [263.511267] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-3] disconnected
<7> [263.511277] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-2]
<7> [263.511284] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-2]
<7> [263.515596] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-2] disconnected
<7> [263.515664] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:99:DP-3]
<7> [263.515712] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:99:DP-3]
<7> [263.520154] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:99:DP-3] disconnected
<7> [263.520181] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:67:LVDS-1] enabled? yes
<7> [263.520194] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:71:VGA-1] enabled? no
<7> [263.520203] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:74:HDMI-A-1] enabled? no
<7> [263.520213] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:82:DP-1] enabled? no
<7> [263.520222] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:87:HDMI-A-2] enabled? no
<7> [263.520232] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:91:HDMI-A-3] enabled? no
<7> [263.520242] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:95:DP-2] enabled? no
<7> [263.520252] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:99:DP-3] enabled? no
<7> [263.520315] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [263.520359] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:67:LVDS-1] found preferred mode: 1366x768
<7> [263.520371] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1366x768 config
<7> [263.520422] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:49:pipe A] desired mode 1366x768 set (0,0)
<7> [263.524367] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [263.541871] Console: switching to colour frame buffer device 170x48
Created at 2025-11-27 17:50:40