Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Duration 0.04 seconds
Igt-Version 
IGT-Version: 2.2-g72d5c74eb (x86_64) (Linux: 6.18.0-rc7-CI_DRM_17586-gcc835cfc1699+ x86_64)
Out 
Using IGT_SRANDOM=1764095718 for randomisation
Opened device: /dev/dri/card1
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.040s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.040s)
Dmesg
<6> [169.894051] Console: switching to colour dummy device 80x25
<6> [169.894769] [IGT] kms_force_connector_basic: executing
<7> [169.899341] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [169.900502] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [169.901154] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [169.902435] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:123:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [169.902447] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]
<7> [169.902459] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]
<7> [169.903071] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.903355] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [169.903833] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.904236] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.904245] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [169.904526] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [169.907835] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.907844] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [169.908162] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected
<7> [169.908233] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]
<7> [169.908241] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]
<7> [169.908894] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.909202] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [169.909662] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.910059] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.910067] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [169.910429] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [169.913633] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.913642] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [169.913957] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected
<7> [169.914318] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:135:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [169.914327] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]
<7> [169.914335] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]
<7> [169.914930] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [169.915214] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [169.915668] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [169.916009] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [169.916016] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [169.916377] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [169.919523] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [169.919532] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [169.919908] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected
<7> [169.919977] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]
<7> [169.919985] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]
<7> [169.920507] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [169.920803] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [169.921306] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [169.921649] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [169.921658] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [169.921942] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [169.925029] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [169.925038] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [169.925336] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected
<7> [169.925376] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]
<7> [169.925384] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]
<7> [169.925931] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.926206] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [169.926658] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.926979] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.926987] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [169.927295] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [169.930386] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.930394] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [169.930754] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected
<6> [169.931523] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [169.932131] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:123:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [169.932150] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]
<7> [169.932158] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:123:HDMI-A-1]
<7> [169.932711] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.933071] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [169.933514] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.933857] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.933876] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [169.934162] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [169.937277] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.937291] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [169.937671] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] status updated from disconnected to connected
<7> [169.937721] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [169.937854] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [169.938036] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] probed modes:
<7> [169.938051] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [169.938062] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [169.938072] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [169.938082] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [169.938092] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [169.938185] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]
<7> [169.938195] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:123:HDMI-A-1]
<7> [169.938921] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.939299] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [169.939922] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.940347] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.940366] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [169.940961] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [169.944477] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.944497] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [169.945330] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] probed modes:
<7> [169.945342] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [169.945353] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [169.945363] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [169.945373] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [169.945382] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [169.946067] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:123:HDMI-A-1] EDID override set
<7> [169.946118] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]
<7> [169.946129] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:123:HDMI-A-1]
<7> [169.946834] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:123:HDMI-A-1] ELD monitor IGT
<7> [169.946846] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:123:HDMI-A-1] ELD size 24, SAD count 0
<7> [169.947100] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [169.947493] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [169.948245] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [169.948692] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [169.949043] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [169.949067] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [169.949086] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] probed modes:
<7> [169.949095] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [169.949104] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [169.949113] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [169.949122] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [169.949131] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [169.949140] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [169.949515] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:123:HDMI-A-1] EDID override set
<7> [169.949846] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]
<7> [169.949858] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:123:HDMI-A-1]
<7> [169.950249] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:123:HDMI-A-1] ELD monitor IGT
<7> [169.950257] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:123:HDMI-A-1] ELD size 24, SAD count 0
<7> [169.950264] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:123:HDMI-A-1] EDID changed, epoch counter 4
<7> [169.950506] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [169.951010] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [169.951475] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [169.952002] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [169.952346] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [169.952368] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] probed modes:
<7> [169.952377] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [169.952387] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [169.952397] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [169.952406] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [169.952416] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [169.952770] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:123:HDMI-A-1] EDID override reset
<7> [169.952836] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]
<7> [169.952845] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:123:HDMI-A-1]
<7> [169.953516] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.954071] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [169.954530] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.954850] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.954868] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [169.955181] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [169.958280] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.958294] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [169.958702] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:123:HDMI-A-1] EDID changed, epoch counter 5
<7> [169.958905] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [169.958922] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [169.958936] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] probed modes:
<7> [169.958942] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [169.958948] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [169.958955] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [169.958961] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [169.958966] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [169.959324] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:123:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [169.959334] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]
<7> [169.959341] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]
<7> [169.959915] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.960211] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [169.960705] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.961034] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.961041] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [169.961352] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [169.964605] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.964616] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [169.964920] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] status updated from connected to disconnected
<7> [169.964937] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected
<7> [169.964952] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [169.965045] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [169.965155] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]
<7> [169.965166] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]
<7> [169.965684] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.966066] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [169.966731] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.967153] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.967162] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [169.967534] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [169.971079] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.971090] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [169.971522] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected
<6> [169.972520] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [169.973842] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [169.975257] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:106:eDP-1] force updated from 0 to 0 or reprobing
<7> [169.975272] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1]
<7> [169.975284] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1]
<7> [169.975993] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
<7> [169.976387] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
<7> [169.976782] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
<7> [169.977254] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [169.977269] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor
<7> [169.977279] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0
<7> [169.977315] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no
<7> [169.977634] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [169.977960] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no
<7> [169.979560] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes:
<7> [169.979596] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa
<7> [169.979604] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa
<7> [169.979683] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1]
<7> [169.979691] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1]
<7> [169.980042] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
<7> [169.980313] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
<7> [169.980672] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
<7> [169.981017] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [169.981027] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor
<7> [169.981033] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0
<7> [169.981059] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no
<7> [169.981347] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [169.981810] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no
<7> [169.983056] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes:
<7> [169.983067] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa
<7> [169.983078] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa
<7> [169.983326] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:106:eDP-1] EDID override reset
<7> [169.983374] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1]
<7> [169.983382] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1]
<7> [169.983758] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
<7> [169.984076] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
<7> [169.984349] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
<7> [169.984690] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [169.984702] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor
<7> [169.984711] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0
<7> [169.984746] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no
<7> [169.985061] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [169.985366] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no
<7> [169.986604] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes:
<7> [169.986614] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa
<7> [169.986624] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa
<7> [169.986927] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:114:DP-1] EDID override reset
<7> [169.986964] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1]
<7> [169.986972] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]
<7> [169.991395] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected
<7> [169.991835] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:123:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [169.991845] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]
<7> [169.991853] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]
<7> [169.992403] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.992702] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [169.993221] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.993567] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.993715] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [169.994014] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [169.997126] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.997135] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [169.997447] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected
<7> [169.997535] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]
<7> [169.997543] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]
<7> [169.998167] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.998448] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [169.998925] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.999301] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.999310] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [169.999610] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [170.002724] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [170.002732] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [170.003044] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected
<7> [170.003270] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:123:HDMI-A-1] EDID override reset
<7> [170.003306] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]
<7> [170.003313] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]
<7> [170.003887] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [170.004188] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [170.004681] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [170.005046] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [170.005055] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [170.005354] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [170.008448] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [170.008456] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [170.008844] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected
<7> [170.009101] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:129:DP-2] EDID override reset
<7> [170.009137] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2]
<7> [170.009145] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]
<7> [170.013531] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected
<7> [170.013944] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:135:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [170.013954] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]
<7> [170.013962] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]
<7> [170.014488] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [170.014838] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [170.015325] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [170.015675] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [170.015685] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [170.015996] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [170.019078] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [170.019086] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [170.019376] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected
<7> [170.019460] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]
<7> [170.019467] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]
<7> [170.020009] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [170.020295] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [170.020734] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [170.021080] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [170.021088] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [170.021375] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [170.024450] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [170.024457] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [170.024781] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected
<7> [170.025090] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:135:HDMI-A-2] EDID override reset
<7> [170.025137] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]
<7> [170.025147] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]
<7> [170.025799] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [170.026129] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [170.026590] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [170.026976] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [170.026985] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [170.027351] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [170.030536] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [170.030544] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [170.030880] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected
<6> [170.032348] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [170.033123] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [170.056383] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [170.056391] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [170.056475] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1]
<7> [170.056485] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1]
<7> [170.056845] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
<7> [170.057190] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
<7> [170.057523] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
<7> [170.057983] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [170.057996] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor
<7> [170.058004] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0
<7> [170.058041] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no
<7> [170.058306] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [170.058575] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no
<7> [170.059883] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes:
<7> [170.059892] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa
<7> [170.059899] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa
<7> [170.059908] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1]
<7> [170.059914] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]
<7> [170.064283] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected
<7> [170.064295] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]
<7> [170.064303] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]
<7> [170.064857] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [170.065131] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [170.065565] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [170.065962] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [170.065972] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [170.066252] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [170.069317] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [170.069326] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [170.069646] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected
<7> [170.069659] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2]
<7> [170.069669] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]
<7> [170.074044] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected
<7> [170.074055] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]
<7> [170.074062] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]
<7> [170.074563] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [170.074831] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [170.075312] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [170.075602] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [170.075611] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [170.075896] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [170.079051] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [170.079059] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [170.079345] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected
<7> [170.079353] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] enabled? yes
<7> [170.079360] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:114:DP-1] enabled? no
<7> [170.079365] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:123:HDMI-A-1] enabled? no
<7> [170.079369] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:129:DP-2] enabled? no
<7> [170.079374] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:135:HDMI-A-2] enabled? no
<7> [170.079412] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [170.079433] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] found preferred mode: 3200x1800
<7> [170.079438] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config
<7> [170.079463] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:56:pipe A] desired mode 3200x1800 set (0,0)
<7> [170.089715] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [170.106605] Console: switching to colour frame buffer device 200x56
Created at 2025-11-26 09:13:19