igt@i915_pm_rpm@module-reload on fi-skl-6600u@IGT

Detail	Value
Duration	13.35 seconds
Igt-Version	IGT-Version: 2.2-g254cd1023 (x86_64) (Linux: 6.18.0-rc6-CI_DRM_17575-g13909978d70f+ x86_64)
Out	Using IGT_SRANDOM=1763647112 for randomisation Opened device: /dev/dri/card1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff888130dd17f8 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x64/0x220 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x1f/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] hsw_get_pipe_config+0x1bb/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x750 [i915] intel_atomic_commit_tail+0x121e/0x1c40 [i915] intel_atomic_commit+0x2e5/0x330 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x407/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 __x64_sys_ioctl+0xa5/0x100 Starting subtest: module-reload Reloading i915 with disable_display=1 mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 2 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff888239a0d7f8 has 1/2 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x64/0x220 [i915] i915_display_rpm_get+0x1a/0x30 [i915] intel_display_rpm_get+0x1e/0x30 [i915] intel_display_power_get+0x22/0x70 [i915] intel_audio_component_get_power+0x2f/0x180 [i915] snd_hdac_display_power+0x86/0x140 [snd_hda_core] azx_probe_continue+0x24f/0x9c0 [snd_hda_intel] azx_probe_work+0x15/0x20 [snd_hda_intel] process_one_work+0x22e/0x6f0 worker_thread+0x1e8/0x3d0 kthread+0x11f/0x250 ret_from_fork+0x2d7/0x310 ret_from_fork_asm+0x1a/0x30 ref_tracker: intel_runtime_pm@ffff888239a0d7f8 has 1/2 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x64/0x220 [i915] i915_display_rpm_get+0x1a/0x30 [i915] intel_display_rpm_get+0x1e/0x30 [i915] intel_display_power_get+0x22/0x70 [i915] intel_pps_vdd_on_unlocked+0xbd/0x360 [i915] intel_dp_aux_xfer+0x122/0x810 [i915] intel_dp_aux_transfer+0xd4/0x340 [i915] drm_dp_dpcd_access+0xc3/0x160 [drm_display_helper] drm_dp_dpcd_read+0x87/0x160 [drm_display_helper] intel_alpm_init+0x39/0x90 [i915] intel_dp_init_connector+0x9c1/0x14e0 [i915] intel_ddi_init+0xcef/0x1210 [i915] intel_bios_for_each_encoder+0x39/0x60 [i915] intel_setup_outputs+0x1f4/0xc20 [i915] intel_display_driver_probe_nogem+0x16a/0x260 [i915] Reloading i915 with mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff8882348657f8 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x64/0x220 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x1f/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] hsw_get_pipe_config+0x1bb/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x750 [i915] intel_atomic_commit_tail+0x121e/0x1c40 [i915] intel_atomic_commit+0x2e5/0x330 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x407/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 __x64_sys_ioctl+0xa5/0x100 Subtest module-reload: SUCCESS (13.354s)
Err	Starting subtest: module-reload Subtest module-reload: SUCCESS (13.354s)
Dmesg	<6> [288.416149] Console: switching to colour dummy device 80x25 <6> [288.417587] [IGT] i915_pm_rpm: executing <7> [288.421372] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [288.422380] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] <7> [288.422394] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1] <7> [288.423105] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [288.423406] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [288.423979] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [288.424506] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [288.424519] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor <7> [288.424528] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0 <7> [288.424599] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no <7> [288.424981] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [288.425353] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [288.427458] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes: <7> [288.427471] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [288.427482] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [288.427687] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] <7> [288.427698] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [288.432200] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected <7> [288.432290] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] <7> [288.432298] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [288.433180] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [288.433615] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [288.434185] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [288.434619] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [288.434629] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [288.434934] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [288.438061] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [288.438073] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [288.438392] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected <7> [288.438480] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] <7> [288.438487] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [288.442912] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected <7> [288.442997] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] <7> [288.443004] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [288.443522] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [288.443821] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [288.444321] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [288.444635] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [288.444644] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [288.444957] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [288.448000] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [288.448008] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [288.448300] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected <7> [288.454912] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] <7> [288.454923] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [288.459295] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected <7> [288.460037] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] <7> [288.460046] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [288.460603] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [288.460918] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [288.461354] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [288.461793] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [288.461803] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [288.462088] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [288.465142] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [288.465150] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [288.465437] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected <7> [288.466257] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] <7> [288.466269] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [288.470784] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected <7> [288.471416] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] <7> [288.471424] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [288.471996] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [288.472385] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [288.472966] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [288.473401] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [288.473409] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [288.473721] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [288.476854] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [288.476862] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [288.477165] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected <7> [288.477917] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] <7> [288.477929] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1] <7> [288.478362] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [288.478754] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [288.479119] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [288.479422] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [288.479431] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor <7> [288.479437] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0 <7> [288.479462] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no <7> [288.479738] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [288.480057] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [288.481933] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes: <7> [288.481945] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [288.481956] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [288.482001] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] <7> [288.482010] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [288.486440] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected <7> [288.486474] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] <7> [288.486482] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [288.487080] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [288.487471] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [288.488054] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [288.488467] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [288.488476] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [288.488800] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [288.491933] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [288.491942] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [288.492229] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected <7> [288.492276] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] <7> [288.492283] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [288.496770] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected <7> [288.496800] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] <7> [288.496808] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [288.497347] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [288.497624] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [288.498170] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [288.498573] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [288.498582] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [288.498937] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [288.502114] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [288.502122] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [288.502411] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected <7> [288.503081] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:140] <7> [288.626073] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [289.549614] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:56:pipe A] <7> [289.550194] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [289.551210] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [289.551625] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [289.551938] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [289.552248] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [289.552576] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [289.552930] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [289.553240] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [289.553566] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [289.553916] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [289.554227] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [289.554538] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [289.554889] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [289.555185] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [289.555480] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [289.555827] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [289.556170] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [289.556455] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [289.556764] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [289.557095] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [289.557385] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [289.557688] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [289.557984] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [289.558277] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [289.558657] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [289.558986] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [289.559269] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [289.559646] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [289.559975] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [289.560269] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [289.560690] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [289.561105] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [289.561514] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [289.561937] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [289.562349] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [289.562781] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [289.563184] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [289.563577] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [289.563906] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [289.564200] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset <7> [289.564499] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:56:pipe A] releasing DPLL 0 <7> [289.564874] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [289.565220] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [289.565488] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [289.565787] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [289.566107] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [289.566375] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [289.566744] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [289.567130] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [289.567454] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz <7> [289.567813] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [289.568145] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [289.568417] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [289.568744] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [modeset] <7> [289.569072] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [289.569346] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [289.569711] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [289.570205] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [289.572100] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [289.775948] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 0 <7> [289.778075] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [289.788114] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power off <7> [289.789075] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [289.790023] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - short <7> [289.791895] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power off time <7> [289.793396] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [289.844779] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [289.846013] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long <7> [289.847158] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [289.849282] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [289.852373] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:105:DDI A/PHY A] <7> [289.852402] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [289.854010] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A] <7> [289.856639] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:56:pipe A] <7> [289.858616] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [289.860057] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [289.863067] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A] <7> [289.864366] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B] <7> [289.865551] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A] <7> [289.866892] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B] <7> [289.868233] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C] <7> [289.869554] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C] <7> [289.870726] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A] <7> [289.871899] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B] <7> [289.873180] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C] <7> [289.874216] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1] <7> [289.876119] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A] <7> [289.878301] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:80:pipe B] <7> [289.878988] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:104:pipe C] <7> [289.984057] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [289.986022] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [289.987411] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [289.989058] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [289.993307] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [290.011769] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [290.090301] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:106:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [290.091775] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:105:DDI A/PHY A][CRTC:56:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 max link_bpp 24.0000 <7> [290.092995] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000 <7> [290.094429] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [290.095790] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:105:DDI A/PHY A] [CRTC:56:pipe A] <7> [290.097479] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [290.098704] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [290.100388] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [290.101640] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [290.103184] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [290.104369] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [290.105839] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [290.107017] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [290.108360] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [290.109556] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [290.110944] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [290.112159] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [290.113572] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [290.115136] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [290.116569] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [290.117718] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [290.119070] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [290.120211] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [290.121556] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [290.122715] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [290.124096] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [290.125571] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [290.127234] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [290.128920] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [290.130582] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [290.132237] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [290.133445] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [290.134452] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [290.135790] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [290.137270] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [290.138721] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [290.140216] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [290.141650] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [290.142672] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [290.143943] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [290.145424] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [290.146884] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [290.148349] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [290.149760] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [290.150781] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset <7> [290.152388] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [290.153842] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [290.155253] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [290.156708] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [290.158077] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [290.159411] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [290.160652] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [290.161925] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [290.163093] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [290.164185] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [290.165372] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [290.166351] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [290.167485] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:56:pipe A] allocated DPLL 0 <7> [290.168866] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:56:pipe A] reserving DPLL 0 <7> [290.169965] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: yes [modeset] <7> [290.171025] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [290.172187] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [290.173176] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [290.174337] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [290.175347] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [290.176485] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [290.177813] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [290.179022] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [290.180049] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [290.181222] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [290.182211] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [290.183363] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [290.184397] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [290.185582] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [290.186465] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [290.187131] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [290.187911] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [290.188567] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [290.189295] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [290.189980] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [290.190749] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [290.191368] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [290.192032] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [290.192816] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [290.193603] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [290.194569] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [290.195430] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [290.196169] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [290.196892] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [290.197458] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [290.197975] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [290.198667] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [290.199368] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [290.200093] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [290.200822] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [290.201497] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [290.202192] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [290.202824] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [290.203289] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [290.203781] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [290.204309] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [290.204705] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [290.205146] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:107] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [290.205557] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [290.206040] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [290.206488] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [290.206930] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [290.218615] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [290.226833] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [290.227293] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [290.227989] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [290.228853] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [290.229670] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [290.230729] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A] <7> [290.231159] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B] <7> [290.231609] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A] <7> [290.232006] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B] <7> [290.232409] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C] <7> [290.232857] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C] <7> [290.233271] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A] <7> [290.233695] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B] <7> [290.234103] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C] <7> [290.234792] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:56:pipe A] <7> [290.235227] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [290.235969] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power on <7> [290.236534] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (115 ms remaining) <7> [290.359956] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [290.369656] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [290.370146] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power on <7> [290.370681] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003 <7> [290.419816] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [290.421074] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long <7> [290.422218] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [290.423434] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A] <7> [290.570926] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [290.572351] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [290.573807] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [290.576743] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turning VDD on <7> [290.578131] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b <7> [290.584886] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [290.585725] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [290.588870] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [290.590215] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [290.591696] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [290.595297] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Clock recovery OK <7> [290.596384] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [290.597484] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [290.602420] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [290.603612] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [290.604746] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [290.608677] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [290.610282] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [290.611929] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [290.616269] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [290.617937] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [290.620773] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [290.624345] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [290.625958] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [290.628265] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 37 <7> [290.640044] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [290.647764] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1] <7> [290.649320] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A] <7> [290.655733] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [290.656045] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <6> [290.661887] [IGT] i915_pm_rpm: starting subtest module-reload <7> [290.662019] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [290.664225] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [290.665807] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [290.667615] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [290.669280] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [290.669318] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [290.670877] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [290.677022] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [290.677057] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [290.678791] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [290.684844] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [290.686837] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [290.688387] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [290.690890] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [290.692643] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [290.692681] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [290.694244] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [290.699261] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [290.699290] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [290.802091] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [290.802982] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [290.815688] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [290.841218] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [290.841713] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [290.854657] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [290.896130] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [290.899286] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [290.916615] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [290.917335] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [290.918079] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [290.921531] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [290.922217] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [290.923861] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [290.925189] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [290.925939] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [290.926842] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [290.931556] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [291.034447] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [291.035290] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [291.035693] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [291.036221] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [291.047841] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:107] is removed <7> [291.047975] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [291.048925] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [291.049702] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [291.050412] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [291.051531] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [291.052776] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [291.056914] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [291.058076] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [291.058884] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [291.059638] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [291.060338] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [291.061065] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [291.061713] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [291.062182] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [291.062831] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [291.063671] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [291.064372] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [291.065198] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [291.065924] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [291.066471] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [291.066986] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [291.067676] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [291.068379] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [291.069111] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [291.069820] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [291.070537] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [291.071112] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [291.071678] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [291.072362] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [291.073156] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [291.073922] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [291.074672] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [291.075367] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [291.075991] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [291.076596] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [291.077065] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [291.077790] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [291.078523] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [291.079224] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [291.079940] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [291.080650] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [291.081120] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [291.081670] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [291.082371] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [291.083103] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [291.083821] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [291.084540] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset <7> [291.085237] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:56:pipe A] releasing DPLL 0 <7> [291.085955] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [291.087303] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [291.088219] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [291.088943] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [291.089638] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [291.090318] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [291.090900] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [modeset] <7> [291.091455] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [291.091972] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [291.092546] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [291.095319] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [291.303917] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 0 <7> [291.306021] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [291.327243] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power off <7> [291.328234] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [291.329185] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - short <7> [291.330316] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power off time <7> [291.331872] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [291.382770] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [291.382946] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [291.384584] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long <7> [291.385620] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:105:DDI A/PHY A] <7> [291.386038] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [291.386290] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:56:pipe A] <7> [291.387807] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A] <7> [291.388691] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [291.390468] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [291.394137] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A] <7> [291.395974] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B] <7> [291.397202] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A] <7> [291.398909] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B] <7> [291.400314] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C] <7> [291.401882] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C] <7> [291.402993] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A] <7> [291.404413] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B] <7> [291.405686] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C] <7> [291.407057] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1] <7> [291.410219] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A] <7> [291.482456] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [291.532255] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:106:eDP-1] removing connector from sysfs <7> [291.552886] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:114:DP-1] removing connector from sysfs <7> [291.559197] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:123:HDMI-A-1] removing connector from sysfs <7> [291.568320] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:129:DP-2] removing connector from sysfs <7> [291.576708] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:135:HDMI-A-2] removing connector from sysfs <7> [291.603490] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (282 ms remaining) <7> [291.888115] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [291.977250] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [292.727447] [IGT] Reloading i915 w/o display <5> [293.631755] Setting dangerous option force_probe - tainting kernel <6> [293.643737] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0 <7> [293.645828] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K <7> [293.646349] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [293.646675] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH <7> [293.647052] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [293.647556] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [293.648197] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [293.648616] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [293.649749] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [293.650038] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [293.650291] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [293.650595] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [293.650608] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [293.651361] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [293.651401] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [293.651751] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [293.652089] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7717 MiB [mem 0x00000000-0x1e252ffff], io: n/a <7> [293.652341] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a <7> [293.653135] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018 <7> [293.653535] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [293.653914] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [293.654212] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [293.654525] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [293.664490] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [293.664804] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [293.665082] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [293.665358] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [293.665693] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [293.666065] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [293.666431] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no <7> [293.666823] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [293.667188] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [293.667559] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no <7> [293.667916] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes <7> [293.668215] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no <7> [293.668491] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3 <7> [293.668774] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [293.669017] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0 <7> [293.669259] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7> [293.670472] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [293.670865] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203 <7> [293.671212] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [293.671573] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [293.671928] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [293.672232] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [293.672563] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 848) <7> [293.672931] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [293.673235] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [293.673671] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [293.674039] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [293.674371] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136) <7> [293.674700] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [293.675056] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [293.675361] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [293.675697] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [293.676062] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [293.676445] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [293.676770] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [293.677081] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [293.677374] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [293.677704] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [293.678021] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [293.678304] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [293.678619] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [293.678960] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [293.679408] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [293.679801] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [293.680146] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [293.680462] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [293.680773] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [293.681074] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [293.681469] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [293.681785] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [293.682143] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [293.682476] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [293.682883] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [293.683185] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [293.683504] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [293.683836] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [293.684811] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <7> [293.685989] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [293.686321] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [293.686725] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [293.687157] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [293.687207] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <6> [293.688153] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [293.688066] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [293.688904] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [293.689245] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7> [293.689614] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec) <7> [293.689949] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec) <7> [293.690247] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec) <7> [293.690573] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec) <7> [293.690892] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec) <7> [293.691189] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec) <7> [293.691528] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec) <7> [293.691837] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec) <7> [293.692180] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec) <7> [293.692589] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec) <7> [293.692915] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec) <7> [293.693232] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec) <7> [293.693550] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec) <7> [293.693866] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec) <7> [293.694163] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec) <7> [293.703717] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [293.714661] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [293.715222] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:105:DDI A/PHY A] Using AUX CH A (VBT) <7> [293.718086] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:105:DDI A/PHY A] <7> [293.724455] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [293.724807] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [293.725113] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [293.725417] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [293.725874] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [293.726234] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [293.726573] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP <7> [293.726934] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [293.727240] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0 <7> [293.727616] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0 <7> [293.728131] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:105:DDI A/PHY A] initial power sequencer: PPS 0 <7> [293.728487] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [293.728787] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [293.729071] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [293.729354] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [293.729664] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [293.730050] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [293.730655] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turning VDD on <7> [293.730973] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [293.731304] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [293.741614] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [293.742010] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [293.742326] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [293.946281] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [293.948414] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [293.951149] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00 <7> [293.955840] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [293.974486] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [293.974551] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor <7> [293.974596] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0 <7> [293.975173] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:106:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [293.976890] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:106:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [293.978677] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:106:eDP-1] DRRS type: static <7> [293.980709] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:106:eDP-1] Using native PCH PWM for backlight control <7> [293.982299] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:106:eDP-1] backlight initialized, disabled, brightness 0/937 <7> [293.984679] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [293.986405] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [293.988026] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [293.989680] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [293.991230] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [293.992978] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [293.995992] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:113:DDI B/PHY B] Using AUX CH B (VBT) <7> [293.998003] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:113:DDI B/PHY B] <7> [294.002747] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [294.004410] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:113:DDI B/PHY B] <7> [294.005922] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:113:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [294.009906] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:128:DDI C/PHY C] Using AUX CH C (VBT) <7> [294.011652] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:128:DDI C/PHY C] <7> [294.015593] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [294.017210] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:128:DDI C/PHY C] <7> [294.018825] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:128:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [294.023741] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:56:pipe A] hw state readout: disabled <7> [294.025676] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe B] hw state readout: disabled <7> [294.027307] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:104:pipe C] hw state readout: disabled <7> [294.028402] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [294.029805] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] hw state readout: disabled, pipe A <7> [294.031233] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] hw state readout: disabled, pipe A <7> [294.032410] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:57:plane 1B] hw state readout: disabled, pipe B <7> [294.033226] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:66:plane 2B] hw state readout: disabled, pipe B <7> [294.034087] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:75:cursor B] hw state readout: disabled, pipe B <7> [294.035100] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 1C] hw state readout: disabled, pipe C <7> [294.036108] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:90:plane 2C] hw state readout: disabled, pipe C <7> [294.037107] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:99:cursor C] hw state readout: disabled, pipe C <7> [294.038018] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:105:DDI A/PHY A] hw state readout: disabled, pipe A <7> [294.038815] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:113:DDI B/PHY B] hw state readout: disabled, pipe A <7> [294.039559] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:115:DP-MST A] hw state readout: disabled, pipe A <7> [294.040238] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:116:DP-MST B] hw state readout: disabled, pipe B <7> [294.040931] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DP-MST C] hw state readout: disabled, pipe C <7> [294.042251] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:128:DDI C/PHY C] hw state readout: disabled, pipe A <7> [294.043036] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:130:DP-MST A] hw state readout: disabled, pipe A <7> [294.043782] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:131:DP-MST B] hw state readout: disabled, pipe B <7> [294.044517] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:132:DP-MST C] hw state readout: disabled, pipe C <7> [294.045321] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [294.046168] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [294.046983] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [294.047853] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [294.048849] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:106:eDP-1] hw state readout: disabled <7> [294.049704] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:114:DP-1] hw state readout: disabled <7> [294.050425] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:123:HDMI-A-1] hw state readout: disabled <7> [294.051155] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:129:DP-2] hw state readout: disabled <7> [294.051869] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:135:HDMI-A-2] hw state readout: disabled <7> [294.052486] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [294.053070] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] min_cdclk 0 kHz <7> [294.053681] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] min_cdclk 0 kHz <7> [294.054267] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:56:pipe A] min_cdclk 0 kHz <7> [294.054869] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:57:plane 1B] min_cdclk 0 kHz <7> [294.055462] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:66:plane 2B] min_cdclk 0 kHz <7> [294.056044] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:75:cursor B] min_cdclk 0 kHz <7> [294.056677] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe B] min_cdclk 0 kHz <7> [294.057261] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 1C] min_cdclk 0 kHz <7> [294.057866] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:90:plane 2C] min_cdclk 0 kHz <7> [294.058463] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:99:cursor C] min_cdclk 0 kHz <7> [294.059017] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:104:pipe C] min_cdclk 0 kHz <7> [294.059536] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:56:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [294.060022] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:80:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [294.060535] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:104:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [294.061233] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [setup_hw_state] <7> [294.061763] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe B] enable: no [setup_hw_state] <7> [294.062267] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:104:pipe C] enable: no [setup_hw_state] <7> [294.062788] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [294.063379] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [294.063849] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [294.064320] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [294.064847] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7> [294.068058] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [294.068579] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [294.069063] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0 <7> [294.094256] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [294.094592] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [294.094863] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [294.095121] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [294.095383] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 0: start 0x8 <7> [294.095799] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 1: start 0x108 <7> [294.096235] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 2: start 0x208 <7> [294.096705] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 3: start 0x308 <7> [294.097136] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 4: start 0x3c8 <7> [294.097558] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 0: start 0x8 <7> [294.097956] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 1: start 0x108 <7> [294.098255] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 2: start 0x208 <7> [294.098605] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 3: start 0x308 <7> [294.098938] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 4: start 0x3c8 <7> [294.099223] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 0: start 0x8 <7> [294.099524] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 1: start 0x108 <7> [294.099866] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 2: start 0x208 <7> [294.100149] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 3: start 0x308 <7> [294.100444] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 4: start 0x3c8 <7> [294.101078] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [fastset] <7> [294.101371] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe B] enable: no [fastset] <7> [294.101766] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:104:pipe C] enable: no [fastset] <7> [294.102482] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A] <7> [294.103339] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe B] <7> [294.103862] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:104:pipe C] <7> [294.104461] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [294.110846] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:106:eDP-1] adding connector to sysfs <7> [294.112379] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:106:eDP-1] backlight device intel_backlight registered <7> [294.112965] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:106:eDP-1] Registered panel device 'card1-eDP-1', has fwnode: yes <7> [294.114044] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card1-eDP-1 <7> [294.116556] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:106:eDP-1] generating connector hotplug event <7> [294.116708] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:114:DP-1] adding connector to sysfs <7> [294.118310] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card1-DP-1 <7> [294.120764] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:114:DP-1] generating connector hotplug event <7> [294.120915] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:123:HDMI-A-1] adding connector to sysfs <7> [294.122280] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:123:HDMI-A-1] generating connector hotplug event <7> [294.122481] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:129:DP-2] adding connector to sysfs <7> [294.124712] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card1-DP-2 <7> [294.129410] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:129:DP-2] generating connector hotplug event <7> [294.129831] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:135:HDMI-A-2] adding connector to sysfs <7> [294.131850] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:135:HDMI-A-2] generating connector hotplug event <6> [294.131985] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 1 <7> [294.138837] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [294.178738] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [294.192724] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input35 <7> [294.196535] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [294.201163] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [294.201675] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:114:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [294.202130] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [294.202797] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:123:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [294.203252] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [294.203704] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:129:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [294.204174] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [294.204651] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:135:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [294.205097] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [294.206991] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:56:pipe A] not active, skipping <7> [294.207507] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:80:pipe B] not active, skipping <7> [294.207941] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:104:pipe C] not active, skipping <7> [294.208370] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config <7> [294.209113] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [294.210154] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [294.210305] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] <7> [294.210319] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1] <7> [294.210799] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] status updated from unknown to disconnected <7> [294.210818] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] disconnected <7> [294.210838] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [294.210972] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:106:eDP-1] EDID changed, epoch counter 2 <7> [294.210998] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] <7> [294.211008] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [294.211464] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected <7> [294.211477] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] <7> [294.211487] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [294.211898] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected <7> [294.211910] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] <7> [294.211920] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [294.212330] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected <7> [294.212343] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] <7> [294.212352] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [294.212792] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected <7> [294.212803] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [294.212812] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] enabled? no <7> [294.212820] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:114:DP-1] enabled? no <7> [294.212827] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:123:HDMI-A-1] enabled? no <7> [294.212835] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:129:DP-2] enabled? no <7> [294.212842] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:135:HDMI-A-2] enabled? no <7> [294.212903] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [294.212923] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [294.212975] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [294.212990] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [294.214987] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9 <7> [294.215496] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0 <7> [294.215944] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7> [294.216391] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no <7> [294.216857] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no <7> [294.217292] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7> [294.217754] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7> [294.218194] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no <7> [294.218684] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7> [294.219126] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7> [294.219597] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7> [294.220042] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7> [294.220508] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7> [294.220958] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7> [294.221414] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7> [294.221885] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes <7> [294.222336] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7> [294.222823] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7> [294.223266] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7> [294.223730] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7> [294.224168] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no <7> [294.224637] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz <7> [294.225266] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [294.225374] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] <7> [294.225385] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1] <7> [294.225830] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] disconnected <7> [294.225844] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] <7> [294.225855] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [294.226275] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected <7> [294.226287] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] <7> [294.226298] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [294.226734] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected <7> [294.226747] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] <7> [294.226757] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [294.227185] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected <7> [294.227196] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] <7> [294.227205] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [294.227646] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected <7> [294.227660] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [294.227668] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] enabled? no <7> [294.227676] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:114:DP-1] enabled? no <7> [294.227684] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:123:HDMI-A-1] enabled? no <7> [294.227692] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:129:DP-2] enabled? no <7> [294.227699] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:135:HDMI-A-2] enabled? no <7> [294.227755] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [294.227773] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [294.227821] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [294.227852] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [294.227858] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [294.228363] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7> [294.228703] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [294.229022] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [294.229334] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [294.230607] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [294.231159] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [294.232742] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9 <7> [294.233065] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9 <7> [294.233322] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9 <7> [294.233620] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0 <7> [294.233887] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0 <7> [294.234140] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2 <7> [294.234401] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21 <7> [294.234810] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000 <7> [294.235179] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE <7> [294.235596] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7> [294.235978] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7> [294.236360] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39 <7> [294.236770] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7> [294.237156] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7> [294.237568] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7> [294.237955] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7> [294.238340] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7> [294.238754] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7> [294.239139] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7> [294.239547] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7> [294.239934] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7> [294.240318] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no <7> [294.240731] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no <7> [294.241117] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7> [294.241528] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7> [294.241914] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7> [294.242299] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no <7> [294.242698] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no <7> [294.243083] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7> [294.243473] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7> [294.243856] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes <7> [294.244238] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7> [294.244630] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no <7> [294.245009] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7> [294.245304] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7> [294.245629] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no <7> [294.245983] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no <7> [294.246236] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no <7> [294.246530] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7> [294.246898] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no <7> [294.247151] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7> [294.247402] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7> [294.247674] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7> [294.248018] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7> [294.248388] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no <7> [294.248787] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes <7> [294.249168] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7> [294.249552] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7> [294.249929] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7> [294.250312] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7> [294.250698] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7> [294.251081] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403 <7> [294.251481] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001 <7> [294.251864] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3 <7> [294.252245] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007 <7> [294.252645] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000 <7> [294.253022] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000 <7> [294.253305] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24 <7> [294.253581] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8 <7> [294.253898] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7> [294.254150] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7> [294.254402] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes <6> [294.254670] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [294.254674] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [294.254679] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [294.268681] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6> [294.270213] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7> [294.270776] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [294.271652] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [294.273731] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [294.305659] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [294.305976] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [294.306241] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [294.306531] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [294.306909] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [294.307302] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [294.307709] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [294.308100] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [294.308491] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <6> [294.329156] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36 <6> [294.334779] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input37 <6> [294.348523] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input38 <7> [295.604798] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [296.538179] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turning VDD off <7> [296.538581] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [296.538879] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [296.539296] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [296.539625] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [296.540590] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [296.540968] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [296.541211] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [296.541418] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long <7> [296.541955] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [296.543717] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A] <7> [296.549524] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [296.673707] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [296.698566] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [296.707942] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [296.708684] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [296.709321] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [296.709306] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [296.710108] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [296.710914] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [296.711899] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [296.712125] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [296.712881] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [296.713670] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [296.727556] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [296.728120] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [296.728650] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [296.729393] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [296.730571] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [296.872049] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [296.872365] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [296.873453] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [296.874105] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [296.875674] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [296.883339] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [296.883695] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [296.883962] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [296.884222] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [296.884549] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [296.884948] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [296.885342] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [296.885958] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [296.886338] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [296.887232] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [296.887990] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [296.888272] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [296.888583] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [296.889313] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [296.988273] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [296.988635] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [296.989289] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [296.989885] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [296.990541] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [296.991050] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [296.991581] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [296.992043] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [296.992900] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [297.033711] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [297.049680] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:106:eDP-1] removing connector from sysfs <7> [297.058304] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:114:DP-1] removing connector from sysfs <7> [297.064700] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:123:HDMI-A-1] removing connector from sysfs <7> [297.081336] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:129:DP-2] removing connector from sysfs <7> [297.082561] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:135:HDMI-A-2] removing connector from sysfs <7> [297.109748] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [297.110110] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [297.119431] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [297.676519] [IGT] Reloading i915 as normal <5> [298.582076] Setting dangerous option force_probe - tainting kernel <6> [298.593668] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0 <7> [298.595153] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K <7> [298.595614] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [298.595929] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH <7> [298.596282] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [298.596647] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [298.597148] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [298.597453] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [298.598501] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [298.598853] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [298.599117] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [298.599413] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [298.599426] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [298.600075] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [298.600114] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [298.600458] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [298.600776] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7717 MiB [mem 0x00000000-0x1e252ffff], io: n/a <7> [298.601020] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a <7> [298.602004] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018 <7> [298.602362] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [298.602655] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [298.602928] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [298.603202] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [298.612513] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [298.612832] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [298.613116] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [298.613443] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [298.613906] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [298.614288] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [298.614698] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no <7> [298.615102] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [298.615518] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [298.615908] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no <7> [298.616300] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes <7> [298.616701] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no <7> [298.617088] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3 <7> [298.617487] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [298.617876] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0 <7> [298.618267] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7> [298.619426] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [298.619904] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203 <7> [298.620379] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [298.620844] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [298.621306] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [298.621866] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [298.622346] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 848) <7> [298.622805] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [298.623269] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [298.623748] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [298.624212] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [298.624683] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136) <7> [298.625133] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [298.625595] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [298.626042] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [298.626512] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [298.626968] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [298.627441] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [298.627902] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [298.628344] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [298.628773] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [298.629208] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [298.629659] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [298.630091] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [298.630545] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [298.631007] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [298.631565] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [298.632030] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [298.632484] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [298.632921] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [298.633362] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [298.633798] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [298.634366] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [298.634804] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [298.635241] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [298.635707] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [298.636251] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [298.636700] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [298.637141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [298.637593] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [298.638899] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <7> [298.640136] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [298.641711] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [298.642216] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [298.642679] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [298.643134] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [298.644433] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [298.644991] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <6> [298.645870] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [298.645960] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7> [298.646415] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec) <7> [298.646852] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec) <7> [298.647288] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec) <7> [298.647766] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec) <7> [298.648201] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec) <7> [298.648575] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec) <7> [298.649010] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec) <7> [298.649483] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec) <7> [298.649918] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec) <7> [298.650362] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec) <7> [298.650795] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec) <7> [298.651230] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec) <7> [298.651669] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec) <7> [298.652092] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec) <7> [298.652537] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec) <7> [298.658488] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [298.662364] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [298.662879] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:105:DDI A/PHY A] Using AUX CH A (VBT) <7> [298.663373] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:105:DDI A/PHY A] <7> [298.671409] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [298.671901] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [298.672304] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [298.672791] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [298.674686] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [298.675144] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [298.675613] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP <7> [298.676045] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [298.676518] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0 <7> [298.676950] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0 <7> [298.678606] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:105:DDI A/PHY A] initial power sequencer: PPS 0 <7> [298.679097] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [298.679531] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [298.679924] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [298.680322] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [298.680751] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [298.681195] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [298.682260] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turning VDD on <7> [298.682733] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [298.683181] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [298.693525] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [298.693888] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [298.694173] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [298.898109] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [298.900033] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [298.901735] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00 <7> [298.905478] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [298.922973] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [298.923016] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor <7> [298.923043] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0 <7> [298.923617] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:106:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [298.925416] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:106:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [298.927280] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:106:eDP-1] DRRS type: static <7> [298.929494] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:106:eDP-1] Using native PCH PWM for backlight control <7> [298.931318] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:106:eDP-1] backlight initialized, disabled, brightness 0/937 <7> [298.933380] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [298.934589] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [298.935795] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [298.937213] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [298.938454] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [298.939919] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [298.942800] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:113:DDI B/PHY B] Using AUX CH B (VBT) <7> [298.944175] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:113:DDI B/PHY B] <7> [298.948140] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [298.949513] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:113:DDI B/PHY B] <7> [298.950987] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:113:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [298.954016] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:128:DDI C/PHY C] Using AUX CH C (VBT) <7> [298.955687] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:128:DDI C/PHY C] <7> [298.959040] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [298.960495] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:128:DDI C/PHY C] <7> [298.961993] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:128:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [298.966974] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:56:pipe A] hw state readout: disabled <7> [298.969919] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe B] hw state readout: disabled <7> [298.972182] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:104:pipe C] hw state readout: disabled <7> [298.973675] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [298.975266] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] hw state readout: disabled, pipe A <7> [298.976731] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] hw state readout: disabled, pipe A <7> [298.978252] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:57:plane 1B] hw state readout: disabled, pipe B <7> [298.979827] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:66:plane 2B] hw state readout: disabled, pipe B <7> [298.981429] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:75:cursor B] hw state readout: disabled, pipe B <7> [298.983042] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 1C] hw state readout: disabled, pipe C <7> [298.984585] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:90:plane 2C] hw state readout: disabled, pipe C <7> [298.986159] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:99:cursor C] hw state readout: disabled, pipe C <7> [298.987659] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:105:DDI A/PHY A] hw state readout: disabled, pipe A <7> [298.989079] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:113:DDI B/PHY B] hw state readout: disabled, pipe A <7> [298.990110] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:115:DP-MST A] hw state readout: disabled, pipe A <7> [298.991260] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:116:DP-MST B] hw state readout: disabled, pipe B <7> [298.992444] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DP-MST C] hw state readout: disabled, pipe C <7> [298.993731] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:128:DDI C/PHY C] hw state readout: disabled, pipe A <7> [298.994905] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:130:DP-MST A] hw state readout: disabled, pipe A <7> [298.995960] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:131:DP-MST B] hw state readout: disabled, pipe B <7> [298.996839] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:132:DP-MST C] hw state readout: disabled, pipe C <7> [298.997862] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [298.998543] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [298.999240] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [298.999952] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [299.000957] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:106:eDP-1] hw state readout: disabled <7> [299.001819] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:114:DP-1] hw state readout: disabled <7> [299.002629] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:123:HDMI-A-1] hw state readout: disabled <7> [299.003297] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:129:DP-2] hw state readout: disabled <7> [299.004086] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:135:HDMI-A-2] hw state readout: disabled <7> [299.004731] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [299.005298] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] min_cdclk 0 kHz <7> [299.006045] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] min_cdclk 0 kHz <7> [299.006723] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:56:pipe A] min_cdclk 0 kHz <7> [299.007200] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:57:plane 1B] min_cdclk 0 kHz <7> [299.007673] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:66:plane 2B] min_cdclk 0 kHz <7> [299.008195] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:75:cursor B] min_cdclk 0 kHz <7> [299.008697] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe B] min_cdclk 0 kHz <7> [299.009213] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 1C] min_cdclk 0 kHz <7> [299.009808] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:90:plane 2C] min_cdclk 0 kHz <7> [299.010322] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:99:cursor C] min_cdclk 0 kHz <7> [299.010834] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:104:pipe C] min_cdclk 0 kHz <7> [299.011302] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:56:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [299.011782] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:80:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [299.012242] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:104:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [299.012912] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [setup_hw_state] <7> [299.013386] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe B] enable: no [setup_hw_state] <7> [299.013936] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:104:pipe C] enable: no [setup_hw_state] <7> [299.014539] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [299.015128] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [299.015574] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [299.015997] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [299.016411] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7> [299.019235] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [299.019677] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [299.020054] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0 <7> [299.045310] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [299.045665] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [299.045917] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [299.046167] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [299.046446] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 0: start 0x8 <7> [299.046877] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 1: start 0x108 <7> [299.047308] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 2: start 0x208 <7> [299.047952] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 3: start 0x308 <7> [299.048394] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 4: start 0x3c8 <7> [299.048824] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 0: start 0x8 <7> [299.049259] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 1: start 0x108 <7> [299.049738] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 2: start 0x208 <7> [299.050170] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 3: start 0x308 <7> [299.050611] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 4: start 0x3c8 <7> [299.051042] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 0: start 0x8 <7> [299.051480] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 1: start 0x108 <7> [299.051910] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 2: start 0x208 <7> [299.052348] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 3: start 0x308 <7> [299.052777] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 4: start 0x3c8 <7> [299.053611] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [fastset] <7> [299.054058] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe B] enable: no [fastset] <7> [299.054523] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:104:pipe C] enable: no [fastset] <7> [299.055252] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A] <7> [299.056204] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe B] <7> [299.056915] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:104:pipe C] <7> [299.057615] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [299.064655] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:106:eDP-1] adding connector to sysfs <7> [299.067821] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:106:eDP-1] backlight device intel_backlight registered <7> [299.068393] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:106:eDP-1] Registered panel device 'card1-eDP-1', has fwnode: yes <7> [299.069545] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card1-eDP-1 <7> [299.072612] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:106:eDP-1] generating connector hotplug event <7> [299.072770] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:114:DP-1] adding connector to sysfs <7> [299.074468] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card1-DP-1 <7> [299.078343] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:114:DP-1] generating connector hotplug event <7> [299.078508] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:123:HDMI-A-1] adding connector to sysfs <7> [299.080073] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:123:HDMI-A-1] generating connector hotplug event <7> [299.080228] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:129:DP-2] adding connector to sysfs <7> [299.082374] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card1-DP-2 <7> [299.084638] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:129:DP-2] generating connector hotplug event <7> [299.084748] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:135:HDMI-A-2] adding connector to sysfs <7> [299.086043] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:135:HDMI-A-2] generating connector hotplug event <6> [299.086173] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 1 <7> [299.093706] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [299.128881] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [299.139269] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input39 <7> [299.141258] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [299.146316] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [299.147192] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:56:pipe A] not active, skipping <7> [299.147673] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:80:pipe B] not active, skipping <7> [299.148110] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:104:pipe C] not active, skipping <7> [299.148553] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config <7> [299.150315] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [299.151919] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [299.153218] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:114:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [299.153751] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [299.154763] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [299.155124] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [299.156135] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [299.156555] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [299.156566] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [299.156996] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [299.160565] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [299.160578] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [299.161104] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:123:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [299.161782] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [299.166366] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:129:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [299.166863] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [299.167815] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [299.168256] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [299.169108] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [299.169630] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [299.169641] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [299.170062] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [299.173730] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [299.173742] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [299.174225] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:135:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [299.175457] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [299.175954] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] <7> [299.175970] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1] <7> [299.177065] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [299.177507] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [299.177837] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [299.179396] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [299.179411] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor <7> [299.179421] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0 <7> [299.179459] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no <7> [299.179900] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [299.180273] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [299.182095] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] status updated from unknown to connected <7> [299.183348] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [299.183753] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes: <7> [299.183766] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [299.183777] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [299.183789] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] <7> [299.183801] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [299.188717] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected <7> [299.188737] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] <7> [299.188749] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [299.192456] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [299.192946] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [299.193840] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [299.194320] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [299.194352] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [299.194763] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [299.198322] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [299.198376] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [299.198719] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected <7> [299.198731] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] <7> [299.198739] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [299.203127] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected <7> [299.203143] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] <7> [299.203153] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [299.203890] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [299.204322] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [299.205078] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [299.205679] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [299.205691] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [299.206017] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [299.209399] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [299.209409] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [299.209756] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected <7> [299.209765] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] enabled? yes <7> [299.209772] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:114:DP-1] enabled? no <7> [299.209778] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:123:HDMI-A-1] enabled? no <7> [299.209783] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:129:DP-2] enabled? no <7> [299.209788] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:135:HDMI-A-2] enabled? no <7> [299.209830] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [299.209856] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] found preferred mode: 3200x1800 <7> [299.209861] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [299.209884] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:56:pipe A] desired mode 3200x1800 set (0,0) <7> [299.209934] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [299.209975] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] no BIOS fb, allocating a new one <7> [299.216555] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 3200x1800 fb: 0x00180000 <6> [299.218808] fbcon: i915drmfb (fb0) is primary device <6> [299.219787] Console: switching to colour frame buffer device 200x56 <6> [299.219804] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7> [299.223582] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9 <7> [299.224193] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [299.224210] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [299.224086] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0 <7> [299.224538] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7> [299.225028] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] <7> [299.224970] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no <7> [299.225050] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1] <7> [299.225477] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no <7> [299.225796] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [299.225936] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7> [299.226296] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [299.226590] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7> [299.226791] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [299.227089] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no <7> [299.227554] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7> [299.227973] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7> [299.228557] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [299.228573] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor <7> [299.228594] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0 <7> [299.228434] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7> [299.228660] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no <7> [299.228907] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7> [299.229176] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [299.229543] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7> [299.229682] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [299.230040] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7> [299.230522] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7> [299.230975] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes <7> [299.231453] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7> [299.231903] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7> [299.232379] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7> [299.232803] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7> [299.233204] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no <7> [299.233661] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz <7> [299.235143] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes: <7> [299.235165] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [299.235176] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [299.235189] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] <7> [299.235200] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [299.235388] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7> [299.235869] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [299.236249] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [299.236633] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [299.237047] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [299.237515] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [299.238298] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9 <7> [299.238687] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9 <7> [299.239046] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9 <7> [299.239492] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0 <7> [299.239880] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0 <7> [299.240263] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2 <7> [299.240656] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21 <7> [299.241039] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000 <7> [299.241427] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE <7> [299.241795] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7> [299.242252] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected <7> [299.242270] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] <7> [299.242162] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7> [299.242282] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [299.242586] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39 <7> [299.242973] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7> [299.243339] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7> [299.243470] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [299.243778] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7> [299.243972] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [299.244203] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7> [299.244640] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7> [299.244688] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [299.245238] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [299.245081] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7> [299.245248] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [299.245511] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7> [299.245821] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [299.245925] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7> [299.246369] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7> [299.246699] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no <7> [299.247033] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no <7> [299.247392] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7> [299.247724] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7> [299.248046] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7> [299.248407] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no <7> [299.248778] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no <7> [299.249104] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7> [299.249494] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7> [299.249832] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes <7> [299.250260] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [299.250179] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7> [299.250272] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [299.250614] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no <7> [299.250979] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected <7> [299.250994] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] <7> [299.251010] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7> [299.251005] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [299.251454] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7> [299.251832] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no <7> [299.252194] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no <7> [299.252894] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no <7> [299.253270] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7> [299.253654] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no <7> [299.254020] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7> [299.254415] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7> [299.254797] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7> [299.255179] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7> [299.255569] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no <7> [299.255951] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes <7> [299.256443] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected <7> [299.256460] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] <7> [299.256345] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7> [299.256472] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [299.256750] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7> [299.257162] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7> [299.257239] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [299.257634] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7> [299.257751] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [299.258061] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7> [299.258457] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [299.258513] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403 <7> [299.258980] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [299.258945] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001 <7> [299.258990] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [299.259381] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3 <7> [299.259510] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [299.259806] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007 <7> [299.260191] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000 <7> [299.260547] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000 <7> [299.260891] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24 <7> [299.261218] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8 <7> [299.261562] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7> [299.261908] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7> [299.262246] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes <6> [299.262623] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [299.262626] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [299.262629] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [299.263023] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [299.263034] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [299.263500] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected <7> [299.263513] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] enabled? yes <7> [299.263523] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:114:DP-1] enabled? no <7> [299.263531] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:123:HDMI-A-1] enabled? no <7> [299.263538] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:129:DP-2] enabled? no <7> [299.263545] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:135:HDMI-A-2] enabled? no <7> [299.263901] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [299.263945] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] found preferred mode: 3200x1800 <7> [299.263954] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [299.264022] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:56:pipe A] desired mode 3200x1800 set (0,0) <7> [299.265421] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:106:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [299.265959] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:105:DDI A/PHY A][CRTC:56:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 max link_bpp 24.0000 <7> [299.266422] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000 <7> [299.266840] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [299.267263] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:105:DDI A/PHY A] [CRTC:56:pipe A] <7> [299.267677] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [299.268074] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [299.268520] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [299.268923] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [299.269320] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [299.269759] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [299.270158] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [299.270591] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [299.270977] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [299.271307] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [299.271649] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [299.271961] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [299.272304] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [299.272722] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [299.273116] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [299.273531] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [299.273884] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [299.274204] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [299.274611] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [299.275001] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [299.275418] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [299.275778] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [299.276120] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [299.276460] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [299.276849] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [299.277240] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [299.277660] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [299.278024] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [299.278362] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [299.278687] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [299.278998] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [299.279294] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [299.279615] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [299.279919] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [299.280220] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [299.280550] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dpll_hw_state <7> [299.280929] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [299.281265] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 <7> [299.281662] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [299.282033] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [299.282473] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [299.282801] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [299.283061] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [299.283396] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [299.283784] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset <7> [299.284645] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [299.284960] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [299.285242] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [299.285548] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [299.285808] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [299.286105] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [299.286503] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [299.286984] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [299.287453] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [299.287850] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [299.288251] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [299.288675] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [299.289075] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:56:pipe A] allocated DPLL 0 <7> [299.289487] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:56:pipe A] reserving DPLL 0 <7> [299.289891] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: yes [modeset] <7> [299.290303] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [299.290731] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [299.291111] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [299.291496] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [299.291899] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [299.292303] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [299.292718] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [299.293127] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [299.293569] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [299.293978] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <6> [299.294250] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7> [299.294402] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [299.294798] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [299.295197] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [299.295618] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [299.296018] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [299.296424] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [299.296809] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [299.297209] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [299.297621] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [299.298021] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [299.298425] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [299.298827] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [299.299224] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [299.299640] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [299.300056] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [299.300479] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [299.300891] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [299.301304] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [299.301714] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [299.302129] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [299.302555] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [299.302963] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [299.303372] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [299.303772] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [299.304175] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [299.304585] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [299.304976] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [299.305391] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [299.305804] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [299.306215] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [299.306637] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [299.307046] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [299.307461] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:107] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [299.307857] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [299.308258] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [299.308678] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [299.309080] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [299.310284] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [299.311509] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A] <7> [299.311943] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B] <7> [299.312370] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A] <7> [299.312775] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B] <7> [299.313179] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C] <7> [299.313602] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C] <7> [299.314007] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A] <7> [299.314439] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B] <7> [299.314821] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C] <7> [299.315856] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:56:pipe A] <7> [299.316296] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [299.317115] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power on <7> [299.317653] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [299.318094] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [299.328371] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [299.328825] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power on <7> [299.329240] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000000b <7> [299.534297] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [299.534919] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [299.535921] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [299.538756] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [299.539464] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [299.541013] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [299.541632] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [299.542188] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [299.544444] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Clock recovery OK <7> [299.544997] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [299.545594] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [299.547885] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [299.548713] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [299.549603] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [299.552789] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [299.553851] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [299.555780] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [299.558356] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [299.559648] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [299.561450] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 37 <7> [299.566177] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 336 us, max time under evasion is 250 us <7> [299.575465] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [299.582291] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1] <7> [299.583902] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A] <7> [299.586727] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <6> [299.594824] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7> [299.595651] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [299.595782] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [299.595808] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [299.596181] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] <7> [299.596201] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [299.596230] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1] <7> [299.601212] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [299.601869] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [299.603260] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [299.604605] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [299.606202] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [299.606251] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor <7> [299.606287] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0 <7> [299.606492] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no <7> [299.607932] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [299.609382] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [299.615620] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [299.640582] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes: <7> [299.640630] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [299.640672] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [299.640716] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] <7> [299.640754] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [299.646688] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected <7> [299.646741] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] <7> [299.646781] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [299.649457] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [299.650934] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [299.652572] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [299.654113] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [299.654148] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [299.655858] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [299.662407] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [299.662431] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [299.663381] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected <7> [299.663409] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] <7> [299.663428] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [299.668793] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected <7> [299.668833] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] <7> [299.668852] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [299.671185] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [299.671811] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [299.673030] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [299.673848] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [299.673867] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [299.674856] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [299.679224] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [299.679239] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [299.680165] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected <7> [299.680185] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] enabled? yes <7> [299.680199] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:114:DP-1] enabled? no <7> [299.680210] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:123:HDMI-A-1] enabled? no <7> [299.680221] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:129:DP-2] enabled? no <7> [299.680232] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:135:HDMI-A-2] enabled? no <7> [299.680574] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [299.680622] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] found preferred mode: 3200x1800 <7> [299.680634] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [299.681429] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:56:pipe A] desired mode 3200x1800 set (0,0) <7> [299.682366] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [299.682392] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] <7> [299.682413] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1] <7> [299.683161] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [299.683701] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [299.684245] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [299.686219] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [299.686235] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor <7> [299.686247] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0 <7> [299.686313] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no <7> [299.686822] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [299.687256] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [299.690380] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes: <7> [299.690402] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [299.690414] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [299.690591] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] <7> [299.690600] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [299.692940] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [299.693485] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [299.693843] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [299.694109] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [299.694416] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [299.694815] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [299.695117] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected <7> [299.695254] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] <7> [299.695217] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [299.695266] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [299.695643] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [299.696048] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [299.696263] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [299.696827] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [299.697881] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [299.698574] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [299.698586] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [299.699003] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [299.702530] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [299.702543] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [299.703008] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected <7> [299.703145] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] <7> [299.703158] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [299.708304] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected <7> [299.708459] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] <7> [299.708470] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [299.709146] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [299.709558] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [299.710145] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [299.710480] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [299.710488] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [299.710734] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [299.713964] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [299.714069] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [299.714558] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected <7> [299.721747] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] <7> [299.721763] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [299.726356] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected <7> [299.727213] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] <7> [299.727226] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [299.727935] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [299.728346] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [299.729581] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [299.730174] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [299.730185] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [299.730767] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [299.734124] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [299.734138] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [299.734708] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected <7> [299.735774] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] <7> [299.735786] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <6> [299.739879] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input40 <7> [299.740896] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected <7> [299.741879] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] <7> [299.741891] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [299.742743] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [299.743138] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [299.743774] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <6> [299.745376] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input41 <7> [299.746441] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [299.746454] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [299.746862] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <6> [299.749900] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input42 <7> [299.750493] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [299.750504] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [299.752999] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected <7> [299.753789] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] <7> [299.753807] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1] <7> [299.754262] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [299.754668] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [299.755036] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [299.755733] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [299.755747] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor <7> [299.755756] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0 <7> [299.755803] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no <7> [299.756182] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [299.756566] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [299.760578] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes: <7> [299.760592] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [299.760602] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [299.760664] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] <7> [299.760674] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [299.765181] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected <7> [299.765225] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] <7> [299.765233] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [299.766490] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [299.766917] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [299.772219] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [299.774756] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [299.774770] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [299.779340] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [299.786748] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [299.786763] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [299.787253] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected <7> [299.787306] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] <7> [299.788512] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [299.793060] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected <7> [299.793113] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] <7> [299.793124] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [299.793876] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [299.794273] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [299.794872] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [299.795282] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [299.795292] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [299.795715] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [299.799131] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [299.799143] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [299.799649] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected <7> [299.800362] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:139] <7> [300.837736] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:56:pipe A] <7> [300.838258] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [300.839527] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [300.839978] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [300.840436] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [300.840878] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [300.841328] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [300.841759] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [300.842187] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [300.842647] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [300.843077] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [300.843532] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [300.843963] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [300.844433] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [300.844861] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [300.845289] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [300.845739] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [300.846143] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [300.846588] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [300.847027] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [300.847465] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [300.847896] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [300.848338] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [300.848772] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [300.849222] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [300.849673] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [300.850105] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [300.850571] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [300.850991] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [300.851434] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [300.851888] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [300.852341] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [300.852765] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [300.853199] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [300.853640] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [300.854069] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [300.854531] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [300.854956] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [300.855397] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [300.855831] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [300.856258] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset <7> [300.856709] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:56:pipe A] releasing DPLL 0 <7> [300.857206] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [300.857676] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [300.858094] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [300.858522] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [300.858941] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [300.859387] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [300.859803] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [300.860323] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [300.860802] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz <7> [300.861285] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [300.861753] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [300.862158] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [300.862589] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [modeset] <7> [300.863005] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [300.863459] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [300.863873] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [300.864528] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [300.866523] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [301.029805] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [301.071687] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 0 <7> [301.073401] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [301.094890] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power off <7> [301.095419] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [301.096121] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power off time <7> [301.096771] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - short <7> [301.097521] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [301.148471] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [301.148430] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [301.149996] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long <7> [301.150632] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [301.151384] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [301.154052] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:56:pipe A] <7> [301.154183] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:105:DDI A/PHY A] <7> [301.156053] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [301.156755] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A] <7> [301.157637] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [301.159842] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A] <7> [301.161495] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B] <7> [301.162968] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A] <7> [301.164384] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B] <7> [301.165798] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C] <7> [301.167149] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C] <7> [301.168249] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A] <7> [301.169435] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B] <7> [301.170476] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C] <7> [301.171633] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1] <7> [301.173580] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A] <7> [301.176201] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:80:pipe B] <7> [301.177595] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:104:pipe C] <7> [301.279941] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [301.281791] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [301.282983] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [301.284429] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [301.288068] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [301.305481] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [301.395628] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:106:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [301.396710] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:105:DDI A/PHY A][CRTC:56:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 max link_bpp 24.0000 <7> [301.397692] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000 <7> [301.399214] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [301.400735] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:105:DDI A/PHY A] [CRTC:56:pipe A] <7> [301.402365] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [301.403883] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [301.405354] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [301.407536] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [301.409067] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [301.410579] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [301.412109] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [301.413768] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [301.415329] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [301.416829] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [301.418350] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [301.419823] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [301.421340] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [301.422858] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [301.424375] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [301.425853] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [301.427424] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [301.428918] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [301.430427] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [301.431920] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [301.433409] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [301.434895] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [301.436401] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [301.437870] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [301.439361] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [301.440853] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [301.442349] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [301.443839] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [301.445381] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [301.446864] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [301.448391] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [301.449881] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [301.451408] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [301.452913] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [301.454443] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [301.455924] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [301.457455] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [301.458940] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [301.460454] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [301.461933] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset <7> [301.463676] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [301.465156] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [301.466621] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [301.468064] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [301.469523] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [301.470972] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [301.472423] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [301.474153] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [301.475789] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [301.477270] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [301.478765] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [301.480232] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [301.481726] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:56:pipe A] allocated DPLL 0 <7> [301.483203] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:56:pipe A] reserving DPLL 0 <7> [301.484722] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: yes [modeset] <7> [301.486203] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [301.487746] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [301.489229] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [301.490713] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [301.492184] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [301.493670] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [301.495147] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [301.496654] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [301.498146] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [301.499642] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [301.501113] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [301.502222] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [301.503206] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [301.504222] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [301.505221] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [301.506224] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [301.507202] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [301.508196] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [301.509192] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [301.510187] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [301.510981] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [301.511718] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [301.512444] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [301.513161] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [301.513908] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [301.514657] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [301.515413] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [301.516118] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [301.516872] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [301.517613] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [301.518346] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [301.519065] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [301.519735] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [301.520318] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [301.520887] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [301.521481] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [301.522053] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [301.522648] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [301.523221] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [301.523815] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [301.524402] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [301.524973] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [301.525571] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:107] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [301.526152] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [301.526747] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [301.527341] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [301.527912] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [301.540392] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [301.548528] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [301.548955] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [301.549578] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [301.550387] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [301.551116] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [301.551959] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A] <7> [301.552223] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B] <7> [301.552490] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A] <7> [301.552838] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B] <7> [301.553190] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C] <7> [301.553575] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C] <7> [301.553926] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A] <7> [301.554230] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B] <7> [301.554515] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C] <7> [301.554974] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:56:pipe A] <7> [301.555372] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [301.555961] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power on <7> [301.556446] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (94 ms remaining) <7> [301.655709] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [301.730017] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [301.731405] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power on <7> [301.733114] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003 <7> [301.781768] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [301.783008] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long <7> [301.784170] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [301.785350] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A] <7> [301.939549] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [301.940970] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [301.944015] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [301.947091] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turning VDD on <7> [301.948715] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b <7> [301.954496] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [301.955423] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [301.958580] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [301.959824] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [301.960989] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [301.964207] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Clock recovery OK <7> [301.965353] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [301.966481] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [301.970508] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [301.971637] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [301.972785] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [301.976364] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [301.977812] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [301.980009] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [301.982817] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [301.983928] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [301.985713] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 37 <7> [301.990418] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 395 us, max time under evasion is 250 us <7> [301.998793] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [302.006633] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1] <7> [302.008358] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A] <7> [302.015018] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [302.016068] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [302.022887] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [302.024980] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [302.026604] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [302.028388] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [302.030115] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [302.030154] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [302.032106] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [302.039550] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [302.039594] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [302.042094] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [302.048715] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [302.050900] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [302.052294] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [302.055044] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [302.056762] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [302.056799] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [302.058985] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [302.065195] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [302.065232] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [302.168999] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [302.169807] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [302.182453] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [302.207903] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [302.208362] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [302.221432] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [302.284127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [302.286379] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [302.294145] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [302.294786] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [302.295187] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [302.295635] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [302.296237] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [302.296843] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [302.297536] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [302.298125] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [302.298736] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [302.299968] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [302.393021] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [302.394568] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [302.395783] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [302.397004] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <6> [302.404723] Console: switching to colour dummy device 80x25 <7> [302.412842] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:107] is removed <7> [302.413231] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [302.415352] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [302.417018] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [302.418633] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [302.420306] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [302.422833] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [302.449155] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [302.453492] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [302.454863] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [302.456180] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [302.457468] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [302.458751] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [302.460010] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [302.461335] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [302.462586] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [302.463765] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [302.464873] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [302.465899] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [302.467056] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [302.468158] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [302.469323] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [302.470259] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [302.471313] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [302.472748] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [302.473857] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [302.475071] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [302.476069] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [302.477218] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [302.478217] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [302.479375] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [302.480375] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [302.481789] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [302.483073] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [302.484233] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [302.485312] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [302.486539] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [302.487574] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [302.488760] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [302.489755] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [302.490934] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [302.492132] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [302.493594] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [302.495077] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [302.496552] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [302.498003] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [302.499219] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [302.500326] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset <7> [302.501566] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:56:pipe A] releasing DPLL 0 <7> [302.503446] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [302.505061] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [302.506805] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [302.508071] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [302.509105] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [302.510540] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [302.511606] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [modeset] <7> [302.512583] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [302.513549] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [302.514479] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [302.516176] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [302.719570] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 0 <7> [302.721866] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [302.735064] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power off <7> [302.735572] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [302.736213] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power off time <7> [302.736757] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - short <7> [302.737383] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [302.788565] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [302.788983] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [302.789797] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long <7> [302.791203] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [302.791662] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:56:pipe A] <7> [302.791745] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:105:DDI A/PHY A] <7> [302.794251] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [302.794465] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A] <7> [302.796385] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [302.799850] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A] <7> [302.801470] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B] <7> [302.803151] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A] <7> [302.804729] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B] <7> [302.806107] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C] <7> [302.807520] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C] <7> [302.808898] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A] <7> [302.810461] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B] <7> [302.811700] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C] <7> [302.813473] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1] <7> [302.816459] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A] <7> [302.883969] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [302.927937] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:106:eDP-1] removing connector from sysfs <7> [302.938407] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:114:DP-1] removing connector from sysfs <7> [302.943060] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:123:HDMI-A-1] removing connector from sysfs <7> [302.954220] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:129:DP-2] removing connector from sysfs <7> [302.959484] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:135:HDMI-A-2] removing connector from sysfs <7> [302.991485] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (299 ms remaining) <7> [303.295871] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [303.335654] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [304.018097] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS <6> [304.019211] [IGT] i915_pm_rpm: exiting, ret=0

<6> [288.416149] Console: switching to colour dummy device 80x25

<7> [288.421372] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [288.422380] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1]

<7> [288.422394] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1]

<7> [288.423105] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [288.423406] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [288.423979] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [288.424506] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [288.424519] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor

<7> [288.424528] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0

<7> [288.424599] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no

<7> [288.424981] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [288.425353] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [288.427458] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes:

<7> [288.427471] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [288.427482] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [288.427687] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1]

<7> [288.427698] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [288.432200] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected

<7> [288.432290] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]

<7> [288.432298] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [288.433180] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [288.433615] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [288.434185] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [288.434619] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [288.434629] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [288.434934] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [288.438061] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [288.438073] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [288.438392] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected

<7> [288.438480] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2]

<7> [288.438487] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [288.442912] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected

<7> [288.442997] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]

<7> [288.443004] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [288.443522] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [288.443821] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [288.444321] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [288.444635] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [288.444644] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [288.444957] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [288.448000] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [288.448008] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [288.448300] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected

<7> [288.454912] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1]

<7> [288.454923] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [288.459295] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected

<7> [288.460037] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]

<7> [288.460046] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [288.460603] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [288.460918] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [288.461354] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [288.461793] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [288.461803] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [288.462088] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [288.465142] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [288.465150] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [288.465437] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected

<7> [288.466257] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2]

<7> [288.466269] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [288.470784] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected

<7> [288.471416] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]

<7> [288.471424] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [288.471996] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [288.472385] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [288.472966] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [288.473401] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [288.473409] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [288.473721] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [288.476854] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [288.476862] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [288.477165] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected

<7> [288.477917] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1]

<7> [288.477929] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1]

<7> [288.478362] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [288.478754] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [288.479119] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [288.479422] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [288.479431] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor

<7> [288.479437] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0

<7> [288.479462] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no

<7> [288.479738] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [288.480057] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [288.481933] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes:

<7> [288.481945] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [288.481956] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [288.482001] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1]

<7> [288.482010] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [288.486440] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected

<7> [288.486474] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]

<7> [288.486482] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [288.487080] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [288.487471] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [288.488054] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [288.488467] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [288.488476] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [288.488800] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [288.491933] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [288.491942] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [288.492229] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected

<7> [288.492276] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2]

<7> [288.492283] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [288.496770] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected

<7> [288.496800] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]

<7> [288.496808] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [288.497347] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [288.497624] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [288.498170] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [288.498573] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [288.498582] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [288.498937] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [288.502114] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [288.502122] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [288.502411] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected

<7> [288.503081] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:140]

<7> [288.626073] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [289.549614] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:56:pipe A]

<7> [289.550194] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [289.551210] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [289.551625] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [289.551938] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [289.552248] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [289.552576] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [289.552930] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [289.553240] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [289.553566] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [289.553916] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [289.554227] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [289.554538] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [289.554889] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [289.555185] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [289.555480] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [289.555827] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [289.556170] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [289.556455] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [289.556764] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [289.557095] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [289.557385] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [289.557688] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [289.557984] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [289.558277] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [289.558657] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [289.558986] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [289.559269] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [289.559646] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [289.559975] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [289.560269] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [289.560690] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [289.561105] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [289.561514] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [289.561937] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [289.562349] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [289.562781] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [289.563184] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [289.563577] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [289.563906] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [289.564200] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset

<7> [289.564499] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:56:pipe A] releasing DPLL 0

<7> [289.564874] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [289.565220] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [289.565488] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [289.565787] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [289.566107] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [289.566375] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [289.566744] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [289.567130] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [289.567454] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz

<7> [289.567813] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [289.568145] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [289.568417] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [289.568744] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [modeset]

<7> [289.569072] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [289.569346] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [289.569711] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [289.570205] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [289.572100] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [289.775948] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 0

<7> [289.778075] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [289.788114] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power off

<7> [289.789075] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [289.790023] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - short

<7> [289.791895] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [289.793396] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [289.844779] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [289.846013] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long

<7> [289.847158] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [289.849282] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [289.852373] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:105:DDI A/PHY A]

<7> [289.852402] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [289.854010] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A]

<7> [289.856639] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:56:pipe A]

<7> [289.858616] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [289.860057] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [289.863067] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A]

<7> [289.864366] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B]

<7> [289.865551] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A]

<7> [289.866892] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B]

<7> [289.868233] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C]

<7> [289.869554] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C]

<7> [289.870726] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A]

<7> [289.871899] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B]

<7> [289.873180] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C]

<7> [289.874216] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1]

<7> [289.876119] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A]

<7> [289.878301] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:80:pipe B]

<7> [289.878988] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:104:pipe C]

<7> [289.984057] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [289.986022] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [289.987411] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [289.989058] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [289.993307] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [290.011769] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [290.090301] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:106:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [290.091775] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:105:DDI A/PHY A][CRTC:56:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 max link_bpp 24.0000

<7> [290.092995] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000

<7> [290.094429] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [290.095790] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:105:DDI A/PHY A] [CRTC:56:pipe A]

<7> [290.097479] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [290.098704] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [290.100388] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [290.101640] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [290.103184] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [290.104369] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [290.105839] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [290.107017] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [290.108360] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [290.109556] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [290.110944] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [290.112159] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [290.113572] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [290.115136] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [290.116569] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [290.117718] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [290.119070] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [290.120211] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [290.121556] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [290.122715] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [290.124096] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [290.125571] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [290.127234] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [290.128920] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [290.130582] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [290.132237] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [290.133445] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [290.134452] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [290.135790] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [290.137270] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [290.138721] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [290.140216] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [290.141650] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [290.142672] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [290.143943] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [290.145424] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [290.146884] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [290.148349] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [290.149760] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [290.150781] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset

<7> [290.152388] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [290.153842] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [290.155253] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [290.156708] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [290.158077] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [290.159411] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [290.160652] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [290.161925] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [290.163093] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [290.164185] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [290.165372] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [290.166351] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [290.167485] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:56:pipe A] allocated DPLL 0

<7> [290.168866] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:56:pipe A] reserving DPLL 0

<7> [290.169965] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: yes [modeset]

<7> [290.171025] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [290.172187] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [290.173176] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [290.174337] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [290.175347] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [290.176485] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [290.177813] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [290.179022] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [290.180049] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [290.181222] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [290.182211] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [290.183363] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [290.184397] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [290.185582] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [290.186465] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [290.187131] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [290.187911] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [290.188567] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [290.189295] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [290.189980] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [290.190749] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [290.191368] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [290.192032] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [290.192816] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [290.193603] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [290.194569] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [290.195430] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [290.196169] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [290.196892] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [290.197458] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [290.197975] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [290.198667] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [290.199368] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [290.200093] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [290.200822] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [290.201497] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [290.202192] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [290.202824] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [290.203289] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [290.203781] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [290.204309] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [290.204705] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [290.205146] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:107] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [290.205557] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [290.206040] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [290.206488] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [290.206930] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [290.218615] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [290.226833] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [290.227293] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [290.227989] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [290.228853] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [290.229670] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [290.230729] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A]

<7> [290.231159] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B]

<7> [290.231609] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A]

<7> [290.232006] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B]

<7> [290.232409] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C]

<7> [290.232857] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C]

<7> [290.233271] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A]

<7> [290.233695] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B]

<7> [290.234103] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C]

<7> [290.234792] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:56:pipe A]

<7> [290.235227] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [290.235969] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power on

<7> [290.236534] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (115 ms remaining)

<7> [290.359956] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [290.369656] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [290.370146] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power on

<7> [290.370681] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003

<7> [290.419816] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [290.421074] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long

<7> [290.422218] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [290.423434] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A]

<7> [290.570926] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [290.572351] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [290.573807] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [290.576743] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turning VDD on

<7> [290.578131] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b

<7> [290.584886] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [290.585725] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [290.588870] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [290.590215] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [290.591696] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [290.595297] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Clock recovery OK

<7> [290.596384] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [290.597484] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [290.602420] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [290.603612] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [290.604746] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [290.608677] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [290.610282] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [290.611929] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [290.616269] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [290.617937] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [290.620773] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [290.624345] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [290.625958] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [290.628265] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 37

<7> [290.640044] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [290.647764] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1]

<7> [290.649320] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A]

<7> [290.655733] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [290.656045] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<6> [290.661887] [IGT] i915_pm_rpm: starting subtest module-reload

<7> [290.662019] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [290.664225] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [290.665807] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [290.667615] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [290.669280] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [290.669318] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [290.670877] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [290.677022] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [290.677057] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [290.678791] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [290.684844] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [290.686837] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [290.688387] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [290.690890] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [290.692643] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [290.692681] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [290.694244] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [290.699261] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [290.699290] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [290.802091] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [290.802982] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [290.815688] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [290.841218] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [290.841713] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [290.854657] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [290.896130] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [290.899286] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [290.916615] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [290.917335] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [290.918079] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [290.921531] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [290.922217] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [290.923861] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [290.925189] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [290.925939] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [290.926842] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [290.931556] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [291.034447] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [291.035290] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [291.035693] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [291.036221] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [291.047841] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:107] is removed

<7> [291.047975] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [291.048925] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [291.049702] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [291.050412] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [291.051531] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [291.052776] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [291.056914] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [291.058076] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [291.058884] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [291.059638] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [291.060338] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [291.061065] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [291.061713] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [291.062182] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [291.062831] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [291.063671] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [291.064372] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [291.065198] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [291.065924] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [291.066471] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [291.066986] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [291.067676] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [291.068379] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [291.069111] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [291.069820] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [291.070537] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [291.071112] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [291.071678] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [291.072362] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [291.073156] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [291.073922] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [291.074672] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [291.075367] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [291.075991] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [291.076596] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [291.077065] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [291.077790] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [291.078523] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [291.079224] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [291.079940] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [291.080650] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [291.081120] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [291.081670] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [291.082371] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [291.083103] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [291.083821] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [291.084540] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset

<7> [291.085237] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:56:pipe A] releasing DPLL 0

<7> [291.085955] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [291.087303] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [291.088219] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [291.088943] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [291.089638] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [291.090318] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [291.090900] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [modeset]

<7> [291.091455] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [291.091972] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [291.092546] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [291.095319] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [291.303917] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 0

<7> [291.306021] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [291.327243] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power off

<7> [291.328234] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [291.329185] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - short

<7> [291.330316] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [291.331872] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [291.382770] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [291.382946] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [291.384584] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long

<7> [291.385620] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:105:DDI A/PHY A]

<7> [291.386038] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [291.386290] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:56:pipe A]

<7> [291.387807] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A]

<7> [291.388691] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [291.390468] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [291.394137] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A]

<7> [291.395974] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B]

<7> [291.397202] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A]

<7> [291.398909] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B]

<7> [291.400314] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C]

<7> [291.401882] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C]

<7> [291.402993] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A]

<7> [291.404413] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B]

<7> [291.405686] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C]

<7> [291.407057] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1]

<7> [291.410219] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A]

<7> [291.482456] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [291.532255] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:106:eDP-1] removing connector from sysfs

<7> [291.552886] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:114:DP-1] removing connector from sysfs

<7> [291.559197] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:123:HDMI-A-1] removing connector from sysfs

<7> [291.568320] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:129:DP-2] removing connector from sysfs

<7> [291.576708] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:135:HDMI-A-2] removing connector from sysfs

<7> [291.603490] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (282 ms remaining)

<7> [291.888115] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [291.977250] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<6> [292.727447] [IGT] Reloading i915 w/o display

<5> [293.631755] Setting dangerous option force_probe - tainting kernel

<6> [293.643737] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0

<7> [293.645828] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K

<7> [293.646349] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [293.646675] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH

<7> [293.647052] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [293.647556] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [293.648197] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [293.648616] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [293.649749] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [293.650038] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [293.650291] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [293.650595] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [293.650608] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [293.651361] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [293.651401] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [293.651751] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [293.652089] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7717 MiB [mem 0x00000000-0x1e252ffff], io: n/a

<7> [293.652341] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a

<7> [293.653135] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018

<7> [293.653535] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [293.653914] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [293.654212] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [293.654525] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [293.664490] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [293.664804] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [293.665082] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [293.665358] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [293.665693] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [293.666065] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [293.666431] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no

<7> [293.666823] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [293.667188] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [293.667559] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no

<7> [293.667916] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes

<7> [293.668215] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no

<7> [293.668491] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3

<7> [293.668774] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [293.669017] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0

<7> [293.669259] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0

<7> [293.670472] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [293.670865] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203

<7> [293.671212] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [293.671573] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [293.671928] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [293.672232] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [293.672563] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 848)

<7> [293.672931] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [293.673235] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [293.673671] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [293.674039] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [293.674371] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136)

<7> [293.674700] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [293.675056] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [293.675361] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [293.675697] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [293.676062] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [293.676445] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [293.676770] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [293.677081] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [293.677374] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [293.677704] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [293.678021] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [293.678304] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [293.678619] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [293.678960] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [293.679408] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [293.679801] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [293.680146] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [293.680462] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [293.680773] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [293.681074] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [293.681469] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [293.681785] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [293.682143] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [293.682476] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [293.682883] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [293.683185] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [293.683504] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [293.683836] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [293.684811] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<7> [293.685989] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [293.686321] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [293.686725] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [293.687157] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [293.687207] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<6> [293.688153] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [293.688066] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [293.688904] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [293.689245] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided

<7> [293.689614] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec)

<7> [293.689949] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec)

<7> [293.690247] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec)

<7> [293.690573] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec)

<7> [293.690892] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec)

<7> [293.691189] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec)

<7> [293.691528] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec)

<7> [293.691837] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec)

<7> [293.692180] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec)

<7> [293.692589] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec)

<7> [293.692915] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec)

<7> [293.693232] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec)

<7> [293.693550] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec)

<7> [293.693866] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec)

<7> [293.694163] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec)

<7> [293.703717] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [293.714661] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [293.715222] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:105:DDI A/PHY A] Using AUX CH A (VBT)

<7> [293.718086] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:105:DDI A/PHY A]

<7> [293.724455] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [293.724807] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [293.725113] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [293.725417] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [293.725874] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [293.726234] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [293.726573] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP

<7> [293.726934] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [293.727240] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0

<7> [293.727616] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0

<7> [293.728131] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:105:DDI A/PHY A] initial power sequencer: PPS 0

<7> [293.728487] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [293.728787] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [293.729071] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [293.729354] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [293.729664] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [293.730050] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [293.730655] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turning VDD on

<7> [293.730973] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [293.731304] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [293.741614] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [293.742010] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [293.742326] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [293.946281] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [293.948414] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [293.951149] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00

<7> [293.955840] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [293.974486] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [293.974551] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor

<7> [293.974596] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0

<7> [293.975173] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:106:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [293.976890] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:106:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [293.978677] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:106:eDP-1] DRRS type: static

<7> [293.980709] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:106:eDP-1] Using native PCH PWM for backlight control

<7> [293.982299] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:106:eDP-1] backlight initialized, disabled, brightness 0/937

<7> [293.984679] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [293.986405] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [293.988026] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [293.989680] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [293.991230] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [293.992978] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [293.995992] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:113:DDI B/PHY B] Using AUX CH B (VBT)

<7> [293.998003] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:113:DDI B/PHY B]

<7> [294.002747] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [294.004410] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:113:DDI B/PHY B]

<7> [294.005922] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:113:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [294.009906] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:128:DDI C/PHY C] Using AUX CH C (VBT)

<7> [294.011652] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:128:DDI C/PHY C]

<7> [294.015593] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [294.017210] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:128:DDI C/PHY C]

<7> [294.018825] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:128:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [294.023741] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:56:pipe A] hw state readout: disabled

<7> [294.025676] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe B] hw state readout: disabled

<7> [294.027307] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:104:pipe C] hw state readout: disabled

<7> [294.028402] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A

<7> [294.029805] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] hw state readout: disabled, pipe A

<7> [294.031233] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] hw state readout: disabled, pipe A

<7> [294.032410] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:57:plane 1B] hw state readout: disabled, pipe B

<7> [294.033226] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:66:plane 2B] hw state readout: disabled, pipe B

<7> [294.034087] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:75:cursor B] hw state readout: disabled, pipe B

<7> [294.035100] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 1C] hw state readout: disabled, pipe C

<7> [294.036108] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:90:plane 2C] hw state readout: disabled, pipe C

<7> [294.037107] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:99:cursor C] hw state readout: disabled, pipe C

<7> [294.038018] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:105:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [294.038815] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:113:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [294.039559] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:115:DP-MST A] hw state readout: disabled, pipe A

<7> [294.040238] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:116:DP-MST B] hw state readout: disabled, pipe B

<7> [294.040931] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DP-MST C] hw state readout: disabled, pipe C

<7> [294.042251] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:128:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [294.043036] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:130:DP-MST A] hw state readout: disabled, pipe A

<7> [294.043782] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:131:DP-MST B] hw state readout: disabled, pipe B

<7> [294.044517] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:132:DP-MST C] hw state readout: disabled, pipe C

<7> [294.045321] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [294.046168] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [294.046983] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [294.047853] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [294.048849] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:106:eDP-1] hw state readout: disabled

<7> [294.049704] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:114:DP-1] hw state readout: disabled

<7> [294.050425] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:123:HDMI-A-1] hw state readout: disabled

<7> [294.051155] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:129:DP-2] hw state readout: disabled

<7> [294.051869] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:135:HDMI-A-2] hw state readout: disabled

<7> [294.052486] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz

<7> [294.053070] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] min_cdclk 0 kHz

<7> [294.053681] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] min_cdclk 0 kHz

<7> [294.054267] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:56:pipe A] min_cdclk 0 kHz

<7> [294.054869] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:57:plane 1B] min_cdclk 0 kHz

<7> [294.055462] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:66:plane 2B] min_cdclk 0 kHz

<7> [294.056044] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:75:cursor B] min_cdclk 0 kHz

<7> [294.056677] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe B] min_cdclk 0 kHz

<7> [294.057261] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 1C] min_cdclk 0 kHz

<7> [294.057866] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:90:plane 2C] min_cdclk 0 kHz

<7> [294.058463] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:99:cursor C] min_cdclk 0 kHz

<7> [294.059017] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:104:pipe C] min_cdclk 0 kHz

<7> [294.059536] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:56:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [294.060022] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:80:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [294.060535] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:104:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [294.061233] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [setup_hw_state]

<7> [294.061763] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe B] enable: no [setup_hw_state]

<7> [294.062267] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:104:pipe C] enable: no [setup_hw_state]

<7> [294.062788] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [294.063379] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [294.063849] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [294.064320] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [294.064847] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global

<7> [294.068058] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [294.068579] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [294.069063] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0

<7> [294.094256] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [294.094592] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [294.094863] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [294.095121] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [294.095383] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 0: start 0x8

<7> [294.095799] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 1: start 0x108

<7> [294.096235] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 2: start 0x208

<7> [294.096705] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 3: start 0x308

<7> [294.097136] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 4: start 0x3c8

<7> [294.097558] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 0: start 0x8

<7> [294.097956] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 1: start 0x108

<7> [294.098255] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 2: start 0x208

<7> [294.098605] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 3: start 0x308

<7> [294.098938] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 4: start 0x3c8

<7> [294.099223] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 0: start 0x8

<7> [294.099524] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 1: start 0x108

<7> [294.099866] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 2: start 0x208

<7> [294.100149] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 3: start 0x308

<7> [294.100444] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 4: start 0x3c8

<7> [294.101078] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [fastset]

<7> [294.101371] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe B] enable: no [fastset]

<7> [294.101766] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:104:pipe C] enable: no [fastset]

<7> [294.102482] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A]

<7> [294.103339] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe B]

<7> [294.103862] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:104:pipe C]

<7> [294.104461] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [294.110846] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:106:eDP-1] adding connector to sysfs

<7> [294.112379] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:106:eDP-1] backlight device intel_backlight registered

<7> [294.112965] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:106:eDP-1] Registered panel device 'card1-eDP-1', has fwnode: yes

<7> [294.114044] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card1-eDP-1

<7> [294.116556] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:106:eDP-1] generating connector hotplug event

<7> [294.116708] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:114:DP-1] adding connector to sysfs

<7> [294.118310] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card1-DP-1

<7> [294.120764] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:114:DP-1] generating connector hotplug event

<7> [294.120915] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:123:HDMI-A-1] adding connector to sysfs

<7> [294.122280] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:123:HDMI-A-1] generating connector hotplug event

<7> [294.122481] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:129:DP-2] adding connector to sysfs

<7> [294.124712] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card1-DP-2

<7> [294.129410] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:129:DP-2] generating connector hotplug event

<7> [294.129831] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:135:HDMI-A-2] adding connector to sysfs

<7> [294.131850] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:135:HDMI-A-2] generating connector hotplug event

<6> [294.131985] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 1

<7> [294.138837] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [294.178738] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [294.192724] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input35

<7> [294.196535] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [294.201163] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [294.201675] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:114:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [294.202130] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [294.202797] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:123:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [294.203252] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [294.203704] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:129:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [294.204174] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [294.204651] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:135:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [294.205097] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [294.206991] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:56:pipe A] not active, skipping

<7> [294.207507] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:80:pipe B] not active, skipping

<7> [294.207941] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:104:pipe C] not active, skipping

<7> [294.208370] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config

<7> [294.209113] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [294.210154] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [294.210305] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1]

<7> [294.210319] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1]

<7> [294.210799] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] status updated from unknown to disconnected

<7> [294.210818] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] disconnected

<7> [294.210838] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [294.210972] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:106:eDP-1] EDID changed, epoch counter 2

<7> [294.210998] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1]

<7> [294.211008] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [294.211464] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected

<7> [294.211477] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]

<7> [294.211487] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [294.211898] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected

<7> [294.211910] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2]

<7> [294.211920] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [294.212330] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected

<7> [294.212343] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]

<7> [294.212352] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [294.212792] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected

<7> [294.212803] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [294.212812] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] enabled? no

<7> [294.212820] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:114:DP-1] enabled? no

<7> [294.212827] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:123:HDMI-A-1] enabled? no

<7> [294.212835] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:129:DP-2] enabled? no

<7> [294.212842] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:135:HDMI-A-2] enabled? no

<7> [294.212903] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [294.212923] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [294.212975] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [294.212990] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [294.214987] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9

<7> [294.215496] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0

<7> [294.215944] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no

<7> [294.216391] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no

<7> [294.216857] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no

<7> [294.217292] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes

<7> [294.217754] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes

<7> [294.218194] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no

<7> [294.218684] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes

<7> [294.219126] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no

<7> [294.219597] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes

<7> [294.220042] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no

<7> [294.220508] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes

<7> [294.220958] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no

<7> [294.221414] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes

<7> [294.221885] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes

<7> [294.222336] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no

<7> [294.222823] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no

<7> [294.223266] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes

<7> [294.223730] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes

<7> [294.224168] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no

<7> [294.224637] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz

<7> [294.225266] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [294.225374] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1]

<7> [294.225385] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1]

<7> [294.225830] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] disconnected

<7> [294.225844] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1]

<7> [294.225855] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [294.226275] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected

<7> [294.226287] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]

<7> [294.226298] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [294.226734] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected

<7> [294.226747] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2]

<7> [294.226757] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [294.227185] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected

<7> [294.227196] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]

<7> [294.227205] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [294.227646] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected

<7> [294.227660] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [294.227668] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] enabled? no

<7> [294.227676] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:114:DP-1] enabled? no

<7> [294.227684] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:123:HDMI-A-1] enabled? no

<7> [294.227692] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:129:DP-2] enabled? no

<7> [294.227699] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:135:HDMI-A-2] enabled? no

<7> [294.227755] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [294.227773] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [294.227821] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [294.227852] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [294.227858] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [294.228363] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device

<7> [294.228703] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [294.229022] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [294.229334] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [294.230607] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [294.231159] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [294.232742] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9

<7> [294.233065] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9

<7> [294.233322] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9

<7> [294.233620] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0

<7> [294.233887] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0

<7> [294.234140] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2

<7> [294.234401] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21

<7> [294.234810] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000

<7> [294.235179] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE

<7> [294.235596] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48

<7> [294.235978] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2

<7> [294.236360] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39

<7> [294.236770] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no

<7> [294.237156] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no

<7> [294.237568] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no

<7> [294.237955] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes

<7> [294.238340] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no

<7> [294.238754] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no

<7> [294.239139] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes

<7> [294.239547] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes

<7> [294.239934] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no

<7> [294.240318] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no

<7> [294.240731] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no

<7> [294.241117] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes

<7> [294.241528] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no

<7> [294.241914] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no

<7> [294.242299] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no

<7> [294.242698] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no

<7> [294.243083] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no

<7> [294.243473] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no

<7> [294.243856] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes

<7> [294.244238] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes

<7> [294.244630] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no

<7> [294.245009] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no

<7> [294.245304] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no

<7> [294.245629] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no

<7> [294.245983] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no

<7> [294.246236] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no

<7> [294.246530] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no

<7> [294.246898] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no

<7> [294.247151] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes

<7> [294.247402] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no

<7> [294.247674] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes

<7> [294.248018] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes

<7> [294.248388] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no

<7> [294.248787] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes

<7> [294.249168] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no

<7> [294.249552] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no

<7> [294.249929] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no

<7> [294.250312] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no

<7> [294.250698] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled

<7> [294.251081] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403

<7> [294.251481] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001

<7> [294.251864] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3

<7> [294.252245] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007

<7> [294.252645] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000

<7> [294.253022] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000

<7> [294.253305] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24

<7> [294.253581] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8

<7> [294.253898] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no

<7> [294.254150] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no

<7> [294.254402] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes

<6> [294.254670] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [294.254674] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [294.254679] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [294.268681] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4

<6> [294.270213] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])

<7> [294.270776] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [294.271652] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [294.273731] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [294.305659] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [294.305976] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [294.306241] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [294.306531] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [294.306909] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [294.307302] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [294.307709] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [294.308100] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [294.308491] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<6> [294.329156] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36

<6> [294.334779] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input37

<6> [294.348523] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input38

<7> [295.604798] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [296.538179] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turning VDD off

<7> [296.538581] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [296.538879] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [296.539296] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [296.539625] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [296.540590] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [296.540968] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [296.541211] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [296.541418] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long

<7> [296.541955] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [296.543717] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A]

<7> [296.549524] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [296.673707] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [296.698566] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [296.707942] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [296.708684] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [296.709321] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [296.709306] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [296.710108] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [296.710914] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [296.711899] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [296.712125] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [296.712881] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [296.713670] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [296.727556] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [296.728120] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [296.728650] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [296.729393] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [296.730571] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [296.872049] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [296.872365] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [296.873453] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [296.874105] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [296.875674] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [296.883339] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [296.883695] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [296.883962] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [296.884222] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [296.884549] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [296.884948] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [296.885342] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [296.885958] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [296.886338] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [296.887232] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [296.887990] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [296.888272] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [296.888583] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [296.889313] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [296.988273] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [296.988635] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [296.989289] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [296.989885] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [296.990541] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [296.991050] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [296.991581] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [296.992043] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [296.992900] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [297.033711] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [297.049680] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:106:eDP-1] removing connector from sysfs

<7> [297.058304] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:114:DP-1] removing connector from sysfs

<7> [297.064700] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:123:HDMI-A-1] removing connector from sysfs

<7> [297.081336] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:129:DP-2] removing connector from sysfs

<7> [297.082561] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:135:HDMI-A-2] removing connector from sysfs

<7> [297.109748] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [297.110110] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [297.119431] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<6> [297.676519] [IGT] Reloading i915 as normal

<5> [298.582076] Setting dangerous option force_probe - tainting kernel

<6> [298.593668] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0

<7> [298.595153] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K

<7> [298.595614] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [298.595929] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH

<7> [298.596282] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [298.596647] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [298.597148] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [298.597453] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [298.598501] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [298.598853] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [298.599117] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [298.599413] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [298.599426] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [298.600075] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [298.600114] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [298.600458] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [298.600776] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7717 MiB [mem 0x00000000-0x1e252ffff], io: n/a

<7> [298.601020] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a

<7> [298.602004] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018

<7> [298.602362] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [298.602655] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [298.602928] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [298.603202] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [298.612513] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [298.612832] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [298.613116] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [298.613443] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [298.613906] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [298.614288] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [298.614698] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no

<7> [298.615102] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [298.615518] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [298.615908] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no

<7> [298.616300] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes

<7> [298.616701] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no

<7> [298.617088] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3

<7> [298.617487] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [298.617876] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0

<7> [298.618267] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0

<7> [298.619426] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [298.619904] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203

<7> [298.620379] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [298.620844] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [298.621306] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [298.621866] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [298.622346] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 848)

<7> [298.622805] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [298.623269] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [298.623748] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [298.624212] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [298.624683] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136)

<7> [298.625133] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [298.625595] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [298.626042] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [298.626512] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [298.626968] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [298.627441] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [298.627902] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [298.628344] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [298.628773] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [298.629208] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [298.629659] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [298.630091] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [298.630545] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [298.631007] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [298.631565] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [298.632030] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [298.632484] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [298.632921] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [298.633362] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [298.633798] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [298.634366] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [298.634804] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [298.635241] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [298.635707] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [298.636251] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [298.636700] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [298.637141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [298.637593] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [298.638899] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<7> [298.640136] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [298.641711] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [298.642216] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [298.642679] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [298.643134] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [298.644433] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [298.644991] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<6> [298.645870] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [298.645960] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided

<7> [298.646415] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec)

<7> [298.646852] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec)

<7> [298.647288] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec)

<7> [298.647766] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec)

<7> [298.648201] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec)

<7> [298.648575] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec)

<7> [298.649010] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec)

<7> [298.649483] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec)

<7> [298.649918] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec)

<7> [298.650362] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec)

<7> [298.650795] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec)

<7> [298.651230] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec)

<7> [298.651669] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec)

<7> [298.652092] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec)

<7> [298.652537] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec)

<7> [298.658488] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [298.662364] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [298.662879] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:105:DDI A/PHY A] Using AUX CH A (VBT)

<7> [298.663373] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:105:DDI A/PHY A]

<7> [298.671409] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [298.671901] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [298.672304] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [298.672791] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [298.674686] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [298.675144] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [298.675613] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP

<7> [298.676045] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [298.676518] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0

<7> [298.676950] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0

<7> [298.678606] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:105:DDI A/PHY A] initial power sequencer: PPS 0

<7> [298.679097] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [298.679531] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [298.679924] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [298.680322] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [298.680751] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [298.681195] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [298.682260] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turning VDD on

<7> [298.682733] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [298.683181] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [298.693525] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [298.693888] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [298.694173] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [298.898109] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [298.900033] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [298.901735] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00

<7> [298.905478] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [298.922973] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [298.923016] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor

<7> [298.923043] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0

<7> [298.923617] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:106:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [298.925416] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:106:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [298.927280] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:106:eDP-1] DRRS type: static

<7> [298.929494] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:106:eDP-1] Using native PCH PWM for backlight control

<7> [298.931318] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:106:eDP-1] backlight initialized, disabled, brightness 0/937

<7> [298.933380] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [298.934589] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [298.935795] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [298.937213] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [298.938454] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [298.939919] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [298.942800] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:113:DDI B/PHY B] Using AUX CH B (VBT)

<7> [298.944175] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:113:DDI B/PHY B]

<7> [298.948140] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [298.949513] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:113:DDI B/PHY B]

<7> [298.950987] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:113:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [298.954016] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:128:DDI C/PHY C] Using AUX CH C (VBT)

<7> [298.955687] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:128:DDI C/PHY C]

<7> [298.959040] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [298.960495] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:128:DDI C/PHY C]

<7> [298.961993] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:128:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [298.966974] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:56:pipe A] hw state readout: disabled

<7> [298.969919] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe B] hw state readout: disabled

<7> [298.972182] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:104:pipe C] hw state readout: disabled

<7> [298.973675] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A

<7> [298.975266] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] hw state readout: disabled, pipe A

<7> [298.976731] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] hw state readout: disabled, pipe A

<7> [298.978252] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:57:plane 1B] hw state readout: disabled, pipe B

<7> [298.979827] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:66:plane 2B] hw state readout: disabled, pipe B

<7> [298.981429] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:75:cursor B] hw state readout: disabled, pipe B

<7> [298.983042] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 1C] hw state readout: disabled, pipe C

<7> [298.984585] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:90:plane 2C] hw state readout: disabled, pipe C

<7> [298.986159] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:99:cursor C] hw state readout: disabled, pipe C

<7> [298.987659] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:105:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [298.989079] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:113:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [298.990110] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:115:DP-MST A] hw state readout: disabled, pipe A

<7> [298.991260] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:116:DP-MST B] hw state readout: disabled, pipe B

<7> [298.992444] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DP-MST C] hw state readout: disabled, pipe C

<7> [298.993731] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:128:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [298.994905] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:130:DP-MST A] hw state readout: disabled, pipe A

<7> [298.995960] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:131:DP-MST B] hw state readout: disabled, pipe B

<7> [298.996839] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:132:DP-MST C] hw state readout: disabled, pipe C

<7> [298.997862] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [298.998543] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [298.999240] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [298.999952] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [299.000957] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:106:eDP-1] hw state readout: disabled

<7> [299.001819] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:114:DP-1] hw state readout: disabled

<7> [299.002629] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:123:HDMI-A-1] hw state readout: disabled

<7> [299.003297] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:129:DP-2] hw state readout: disabled

<7> [299.004086] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:135:HDMI-A-2] hw state readout: disabled

<7> [299.004731] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz

<7> [299.005298] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] min_cdclk 0 kHz

<7> [299.006045] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] min_cdclk 0 kHz

<7> [299.006723] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:56:pipe A] min_cdclk 0 kHz

<7> [299.007200] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:57:plane 1B] min_cdclk 0 kHz

<7> [299.007673] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:66:plane 2B] min_cdclk 0 kHz

<7> [299.008195] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:75:cursor B] min_cdclk 0 kHz

<7> [299.008697] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe B] min_cdclk 0 kHz

<7> [299.009213] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 1C] min_cdclk 0 kHz

<7> [299.009808] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:90:plane 2C] min_cdclk 0 kHz

<7> [299.010322] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:99:cursor C] min_cdclk 0 kHz

<7> [299.010834] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:104:pipe C] min_cdclk 0 kHz

<7> [299.011302] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:56:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [299.011782] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:80:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [299.012242] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:104:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [299.012912] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [setup_hw_state]

<7> [299.013386] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe B] enable: no [setup_hw_state]

<7> [299.013936] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:104:pipe C] enable: no [setup_hw_state]

<7> [299.014539] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [299.015128] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [299.015574] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [299.015997] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [299.016411] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global

<7> [299.019235] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [299.019677] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [299.020054] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0

<7> [299.045310] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [299.045665] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [299.045917] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [299.046167] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [299.046446] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 0: start 0x8

<7> [299.046877] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 1: start 0x108

<7> [299.047308] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 2: start 0x208

<7> [299.047952] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 3: start 0x308

<7> [299.048394] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 4: start 0x3c8

<7> [299.048824] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 0: start 0x8

<7> [299.049259] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 1: start 0x108

<7> [299.049738] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 2: start 0x208

<7> [299.050170] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 3: start 0x308

<7> [299.050611] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 4: start 0x3c8

<7> [299.051042] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 0: start 0x8

<7> [299.051480] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 1: start 0x108

<7> [299.051910] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 2: start 0x208

<7> [299.052348] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 3: start 0x308

<7> [299.052777] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 4: start 0x3c8

<7> [299.053611] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [fastset]

<7> [299.054058] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe B] enable: no [fastset]

<7> [299.054523] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:104:pipe C] enable: no [fastset]

<7> [299.055252] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A]

<7> [299.056204] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe B]

<7> [299.056915] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:104:pipe C]

<7> [299.057615] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [299.064655] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:106:eDP-1] adding connector to sysfs

<7> [299.067821] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:106:eDP-1] backlight device intel_backlight registered

<7> [299.068393] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:106:eDP-1] Registered panel device 'card1-eDP-1', has fwnode: yes

<7> [299.069545] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card1-eDP-1

<7> [299.072612] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:106:eDP-1] generating connector hotplug event

<7> [299.072770] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:114:DP-1] adding connector to sysfs

<7> [299.074468] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card1-DP-1

<7> [299.078343] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:114:DP-1] generating connector hotplug event

<7> [299.078508] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:123:HDMI-A-1] adding connector to sysfs

<7> [299.080073] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:123:HDMI-A-1] generating connector hotplug event

<7> [299.080228] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:129:DP-2] adding connector to sysfs

<7> [299.082374] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card1-DP-2

<7> [299.084638] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:129:DP-2] generating connector hotplug event

<7> [299.084748] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:135:HDMI-A-2] adding connector to sysfs

<7> [299.086043] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:135:HDMI-A-2] generating connector hotplug event

<6> [299.086173] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 1

<7> [299.093706] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [299.128881] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [299.139269] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input39

<7> [299.141258] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [299.146316] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [299.147192] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:56:pipe A] not active, skipping

<7> [299.147673] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:80:pipe B] not active, skipping

<7> [299.148110] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:104:pipe C] not active, skipping

<7> [299.148553] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config

<7> [299.150315] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [299.151919] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [299.153218] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:114:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [299.153751] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [299.154763] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [299.155124] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [299.156135] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [299.156555] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [299.156566] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [299.156996] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [299.160565] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [299.160578] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [299.161104] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:123:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [299.161782] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [299.166366] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:129:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [299.166863] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [299.167815] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [299.168256] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [299.169108] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [299.169630] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [299.169641] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [299.170062] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [299.173730] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [299.173742] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [299.174225] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:135:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [299.175457] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [299.175954] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1]

<7> [299.175970] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1]

<7> [299.177065] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [299.177507] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [299.177837] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [299.179396] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [299.179411] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor

<7> [299.179421] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0

<7> [299.179459] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no

<7> [299.179900] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [299.180273] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [299.182095] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] status updated from unknown to connected

<7> [299.183348] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [299.183753] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes:

<7> [299.183766] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [299.183777] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [299.183789] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1]

<7> [299.183801] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [299.188717] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected

<7> [299.188737] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]

<7> [299.188749] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [299.192456] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [299.192946] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [299.193840] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [299.194320] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [299.194352] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [299.194763] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [299.198322] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [299.198376] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [299.198719] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected

<7> [299.198731] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2]

<7> [299.198739] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [299.203127] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected

<7> [299.203143] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]

<7> [299.203153] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [299.203890] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [299.204322] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [299.205078] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [299.205679] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [299.205691] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [299.206017] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [299.209399] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [299.209409] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [299.209756] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected

<7> [299.209765] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] enabled? yes

<7> [299.209772] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:114:DP-1] enabled? no

<7> [299.209778] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:123:HDMI-A-1] enabled? no

<7> [299.209783] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:129:DP-2] enabled? no

<7> [299.209788] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:135:HDMI-A-2] enabled? no

<7> [299.209830] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [299.209856] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] found preferred mode: 3200x1800

<7> [299.209861] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [299.209884] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:56:pipe A] desired mode 3200x1800 set (0,0)

<7> [299.209934] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [299.209975] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] no BIOS fb, allocating a new one

<7> [299.216555] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 3200x1800 fb: 0x00180000

<6> [299.218808] fbcon: i915drmfb (fb0) is primary device

<6> [299.219787] Console: switching to colour frame buffer device 200x56

<6> [299.219804] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device

<7> [299.223582] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9

<7> [299.224193] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [299.224210] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [299.224086] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0

<7> [299.224538] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no

<7> [299.225028] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1]

<7> [299.224970] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no

<7> [299.225050] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1]

<7> [299.225477] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no

<7> [299.225796] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [299.225936] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes

<7> [299.226296] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [299.226590] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes

<7> [299.226791] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [299.227089] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no

<7> [299.227554] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes

<7> [299.227973] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no

<7> [299.228557] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [299.228573] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor

<7> [299.228594] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0

<7> [299.228434] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes

<7> [299.228660] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no

<7> [299.228907] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no

<7> [299.229176] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [299.229543] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes

<7> [299.229682] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [299.230040] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no

<7> [299.230522] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes

<7> [299.230975] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes

<7> [299.231453] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no

<7> [299.231903] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no

<7> [299.232379] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes

<7> [299.232803] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes

<7> [299.233204] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no

<7> [299.233661] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz

<7> [299.235143] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes:

<7> [299.235165] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [299.235176] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [299.235189] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1]

<7> [299.235200] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [299.235388] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device

<7> [299.235869] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [299.236249] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [299.236633] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [299.237047] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [299.237515] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [299.238298] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9

<7> [299.238687] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9

<7> [299.239046] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9

<7> [299.239492] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0

<7> [299.239880] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0

<7> [299.240263] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2

<7> [299.240656] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21

<7> [299.241039] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000

<7> [299.241427] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE

<7> [299.241795] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48

<7> [299.242252] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected

<7> [299.242270] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]

<7> [299.242162] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2

<7> [299.242282] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [299.242586] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39

<7> [299.242973] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no

<7> [299.243339] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no

<7> [299.243470] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [299.243778] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no

<7> [299.243972] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [299.244203] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes

<7> [299.244640] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no

<7> [299.244688] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [299.245238] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [299.245081] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no

<7> [299.245248] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [299.245511] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes

<7> [299.245821] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [299.245925] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes

<7> [299.246369] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no

<7> [299.246699] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no

<7> [299.247033] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no

<7> [299.247392] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes

<7> [299.247724] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no

<7> [299.248046] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no

<7> [299.248407] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no

<7> [299.248778] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no

<7> [299.249104] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no

<7> [299.249494] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no

<7> [299.249832] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes

<7> [299.250260] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [299.250179] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes

<7> [299.250272] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [299.250614] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no

<7> [299.250979] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected

<7> [299.250994] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2]

<7> [299.251010] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no

<7> [299.251005] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [299.251454] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no

<7> [299.251832] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no

<7> [299.252194] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no

<7> [299.252894] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no

<7> [299.253270] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no

<7> [299.253654] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no

<7> [299.254020] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes

<7> [299.254415] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no

<7> [299.254797] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes

<7> [299.255179] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes

<7> [299.255569] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no

<7> [299.255951] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes

<7> [299.256443] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected

<7> [299.256460] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]

<7> [299.256345] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no

<7> [299.256472] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [299.256750] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no

<7> [299.257162] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no

<7> [299.257239] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [299.257634] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no

<7> [299.257751] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [299.258061] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled

<7> [299.258457] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [299.258513] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403

<7> [299.258980] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [299.258945] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001

<7> [299.258990] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [299.259381] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3

<7> [299.259510] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [299.259806] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007

<7> [299.260191] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000

<7> [299.260547] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000

<7> [299.260891] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24

<7> [299.261218] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8

<7> [299.261562] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no

<7> [299.261908] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no

<7> [299.262246] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes

<6> [299.262623] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [299.262626] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [299.262629] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [299.263023] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [299.263034] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [299.263500] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected

<7> [299.263513] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] enabled? yes

<7> [299.263523] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:114:DP-1] enabled? no

<7> [299.263531] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:123:HDMI-A-1] enabled? no

<7> [299.263538] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:129:DP-2] enabled? no

<7> [299.263545] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:135:HDMI-A-2] enabled? no

<7> [299.263901] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [299.263945] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] found preferred mode: 3200x1800

<7> [299.263954] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [299.264022] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:56:pipe A] desired mode 3200x1800 set (0,0)

<7> [299.265421] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:106:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [299.265959] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:105:DDI A/PHY A][CRTC:56:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 max link_bpp 24.0000

<7> [299.266422] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000

<7> [299.266840] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [299.267263] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:105:DDI A/PHY A] [CRTC:56:pipe A]

<7> [299.267677] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [299.268074] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [299.268520] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [299.268923] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [299.269320] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [299.269759] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [299.270158] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [299.270591] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [299.270977] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [299.271307] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [299.271649] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [299.271961] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [299.272304] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [299.272722] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [299.273116] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [299.273531] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [299.273884] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [299.274204] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [299.274611] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [299.275001] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [299.275418] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [299.275778] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [299.276120] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [299.276460] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [299.276849] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [299.277240] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [299.277660] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [299.278024] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [299.278362] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [299.278687] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [299.278998] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [299.279294] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [299.279615] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [299.279919] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [299.280220] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [299.280550] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dpll_hw_state

<7> [299.280929] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [299.281265] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0

<7> [299.281662] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [299.282033] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [299.282473] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [299.282801] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [299.283061] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [299.283396] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [299.283784] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset

<7> [299.284645] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [299.284960] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [299.285242] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [299.285548] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [299.285808] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [299.286105] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [299.286503] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [299.286984] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [299.287453] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [299.287850] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [299.288251] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [299.288675] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [299.289075] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:56:pipe A] allocated DPLL 0

<7> [299.289487] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:56:pipe A] reserving DPLL 0

<7> [299.289891] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: yes [modeset]

<7> [299.290303] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [299.290731] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [299.291111] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [299.291496] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [299.291899] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [299.292303] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [299.292718] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [299.293127] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [299.293569] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [299.293978] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<6> [299.294250] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4

<7> [299.294402] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [299.294798] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [299.295197] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [299.295618] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [299.296018] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [299.296424] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [299.296809] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [299.297209] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [299.297621] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [299.298021] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [299.298425] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [299.298827] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [299.299224] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [299.299640] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [299.300056] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [299.300479] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [299.300891] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [299.301304] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [299.301714] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [299.302129] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [299.302555] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [299.302963] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [299.303372] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [299.303772] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [299.304175] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [299.304585] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [299.304976] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [299.305391] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [299.305804] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [299.306215] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [299.306637] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [299.307046] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [299.307461] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:107] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [299.307857] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [299.308258] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [299.308678] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [299.309080] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [299.310284] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [299.311509] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A]

<7> [299.311943] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B]

<7> [299.312370] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A]

<7> [299.312775] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B]

<7> [299.313179] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C]

<7> [299.313602] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C]

<7> [299.314007] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A]

<7> [299.314439] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B]

<7> [299.314821] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C]

<7> [299.315856] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:56:pipe A]

<7> [299.316296] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [299.317115] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power on

<7> [299.317653] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [299.318094] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [299.328371] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [299.328825] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power on

<7> [299.329240] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000000b

<7> [299.534297] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [299.534919] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [299.535921] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [299.538756] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [299.539464] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [299.541013] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [299.541632] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [299.542188] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [299.544444] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Clock recovery OK

<7> [299.544997] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [299.545594] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [299.547885] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [299.548713] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [299.549603] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [299.552789] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [299.553851] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [299.555780] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [299.558356] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [299.559648] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [299.561450] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 37

<7> [299.566177] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 336 us, max time under evasion is 250 us

<7> [299.575465] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [299.582291] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1]

<7> [299.583902] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A]

<7> [299.586727] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp

<6> [299.594824] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])

<7> [299.595651] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [299.595782] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [299.595808] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [299.596181] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1]

<7> [299.596201] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [299.596230] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1]

<7> [299.601212] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [299.601869] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [299.603260] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [299.604605] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [299.606202] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [299.606251] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor

<7> [299.606287] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0

<7> [299.606492] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no

<7> [299.607932] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [299.609382] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [299.615620] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [299.640582] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes:

<7> [299.640630] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [299.640672] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [299.640716] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1]

<7> [299.640754] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [299.646688] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected

<7> [299.646741] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]

<7> [299.646781] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [299.649457] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [299.650934] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [299.652572] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [299.654113] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [299.654148] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [299.655858] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [299.662407] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [299.662431] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [299.663381] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected

<7> [299.663409] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2]

<7> [299.663428] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [299.668793] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected

<7> [299.668833] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]

<7> [299.668852] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [299.671185] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [299.671811] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [299.673030] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [299.673848] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [299.673867] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [299.674856] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [299.679224] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [299.679239] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [299.680165] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected

<7> [299.680185] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] enabled? yes

<7> [299.680199] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:114:DP-1] enabled? no

<7> [299.680210] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:123:HDMI-A-1] enabled? no

<7> [299.680221] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:129:DP-2] enabled? no

<7> [299.680232] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:135:HDMI-A-2] enabled? no

<7> [299.680574] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [299.680622] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] found preferred mode: 3200x1800

<7> [299.680634] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [299.681429] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:56:pipe A] desired mode 3200x1800 set (0,0)

<7> [299.682366] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [299.682392] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1]

<7> [299.682413] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1]

<7> [299.683161] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [299.683701] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [299.684245] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [299.686219] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [299.686235] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor

<7> [299.686247] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0

<7> [299.686313] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no

<7> [299.686822] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [299.687256] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [299.690380] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes:

<7> [299.690402] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [299.690414] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [299.690591] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1]

<7> [299.690600] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [299.692940] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [299.693485] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [299.693843] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [299.694109] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [299.694416] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [299.694815] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [299.695117] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected

<7> [299.695254] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]

<7> [299.695217] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [299.695266] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [299.695643] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [299.696048] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [299.696263] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [299.696827] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [299.697881] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [299.698574] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [299.698586] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [299.699003] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [299.702530] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [299.702543] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [299.703008] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected

<7> [299.703145] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2]

<7> [299.703158] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [299.708304] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected

<7> [299.708459] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]

<7> [299.708470] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [299.709146] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [299.709558] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [299.710145] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [299.710480] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [299.710488] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [299.710734] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [299.713964] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [299.714069] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [299.714558] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected

<7> [299.721747] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1]

<7> [299.721763] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [299.726356] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected

<7> [299.727213] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]

<7> [299.727226] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [299.727935] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [299.728346] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [299.729581] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [299.730174] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [299.730185] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [299.730767] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [299.734124] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [299.734138] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [299.734708] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected

<7> [299.735774] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2]

<7> [299.735786] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<6> [299.739879] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input40

<7> [299.740896] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected

<7> [299.741879] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]

<7> [299.741891] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [299.742743] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [299.743138] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [299.743774] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<6> [299.745376] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input41

<7> [299.746441] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [299.746454] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [299.746862] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<6> [299.749900] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input42

<7> [299.750493] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [299.750504] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [299.752999] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected

<7> [299.753789] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1]

<7> [299.753807] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1]

<7> [299.754262] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [299.754668] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [299.755036] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [299.755733] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [299.755747] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor

<7> [299.755756] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0

<7> [299.755803] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no

<7> [299.756182] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [299.756566] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [299.760578] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes:

<7> [299.760592] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [299.760602] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [299.760664] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1]

<7> [299.760674] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [299.765181] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected

<7> [299.765225] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]

<7> [299.765233] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [299.766490] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [299.766917] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [299.772219] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [299.774756] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [299.774770] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [299.779340] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [299.786748] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [299.786763] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [299.787253] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected

<7> [299.787306] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2]

<7> [299.788512] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [299.793060] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected

<7> [299.793113] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]

<7> [299.793124] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [299.793876] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [299.794273] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [299.794872] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [299.795282] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [299.795292] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [299.795715] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [299.799131] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [299.799143] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [299.799649] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected

<7> [299.800362] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:139]

<7> [300.837736] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:56:pipe A]

<7> [300.838258] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [300.839527] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [300.839978] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [300.840436] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [300.840878] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [300.841328] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [300.841759] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [300.842187] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [300.842647] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [300.843077] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [300.843532] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [300.843963] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [300.844433] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [300.844861] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [300.845289] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [300.845739] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [300.846143] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [300.846588] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [300.847027] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [300.847465] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [300.847896] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [300.848338] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [300.848772] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [300.849222] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [300.849673] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [300.850105] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [300.850571] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [300.850991] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [300.851434] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [300.851888] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [300.852341] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [300.852765] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [300.853199] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [300.853640] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [300.854069] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [300.854531] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [300.854956] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [300.855397] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [300.855831] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [300.856258] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset

<7> [300.856709] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:56:pipe A] releasing DPLL 0

<7> [300.857206] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [300.857676] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [300.858094] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [300.858522] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [300.858941] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [300.859387] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [300.859803] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [300.860323] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [300.860802] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz

<7> [300.861285] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [300.861753] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [300.862158] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [300.862589] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [modeset]

<7> [300.863005] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [300.863459] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [300.863873] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [300.864528] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [300.866523] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [301.029805] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [301.071687] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 0

<7> [301.073401] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [301.094890] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power off

<7> [301.095419] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [301.096121] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [301.096771] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - short

<7> [301.097521] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [301.148471] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [301.148430] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [301.149996] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long

<7> [301.150632] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [301.151384] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [301.154052] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:56:pipe A]

<7> [301.154183] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:105:DDI A/PHY A]

<7> [301.156053] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [301.156755] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A]

<7> [301.157637] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [301.159842] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A]

<7> [301.161495] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B]

<7> [301.162968] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A]

<7> [301.164384] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B]

<7> [301.165798] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C]

<7> [301.167149] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C]

<7> [301.168249] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A]

<7> [301.169435] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B]

<7> [301.170476] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C]

<7> [301.171633] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1]

<7> [301.173580] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A]

<7> [301.176201] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:80:pipe B]

<7> [301.177595] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:104:pipe C]

<7> [301.279941] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [301.281791] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [301.282983] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [301.284429] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [301.288068] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [301.305481] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [301.395628] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:106:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [301.396710] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:105:DDI A/PHY A][CRTC:56:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 max link_bpp 24.0000

<7> [301.397692] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000

<7> [301.399214] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [301.400735] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:105:DDI A/PHY A] [CRTC:56:pipe A]

<7> [301.402365] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [301.403883] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [301.405354] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [301.407536] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [301.409067] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [301.410579] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [301.412109] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [301.413768] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [301.415329] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [301.416829] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [301.418350] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [301.419823] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [301.421340] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [301.422858] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [301.424375] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [301.425853] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [301.427424] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [301.428918] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [301.430427] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [301.431920] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [301.433409] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [301.434895] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [301.436401] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [301.437870] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [301.439361] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [301.440853] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [301.442349] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [301.443839] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [301.445381] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [301.446864] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [301.448391] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [301.449881] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [301.451408] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [301.452913] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [301.454443] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [301.455924] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [301.457455] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [301.458940] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [301.460454] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [301.461933] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset

<7> [301.463676] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [301.465156] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [301.466621] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [301.468064] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [301.469523] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [301.470972] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [301.472423] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [301.474153] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [301.475789] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [301.477270] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [301.478765] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [301.480232] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [301.481726] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:56:pipe A] allocated DPLL 0

<7> [301.483203] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:56:pipe A] reserving DPLL 0

<7> [301.484722] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: yes [modeset]

<7> [301.486203] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [301.487746] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [301.489229] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [301.490713] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [301.492184] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [301.493670] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [301.495147] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [301.496654] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [301.498146] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [301.499642] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [301.501113] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [301.502222] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [301.503206] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [301.504222] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [301.505221] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [301.506224] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [301.507202] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [301.508196] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [301.509192] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [301.510187] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [301.510981] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [301.511718] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [301.512444] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [301.513161] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [301.513908] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [301.514657] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [301.515413] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [301.516118] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [301.516872] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [301.517613] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [301.518346] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [301.519065] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [301.519735] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [301.520318] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [301.520887] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [301.521481] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [301.522053] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [301.522648] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [301.523221] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [301.523815] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [301.524402] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [301.524973] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [301.525571] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:107] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [301.526152] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [301.526747] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [301.527341] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [301.527912] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [301.540392] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [301.548528] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [301.548955] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [301.549578] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [301.550387] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [301.551116] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [301.551959] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A]

<7> [301.552223] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B]

<7> [301.552490] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A]

<7> [301.552838] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B]

<7> [301.553190] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C]

<7> [301.553575] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C]

<7> [301.553926] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A]

<7> [301.554230] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B]

<7> [301.554515] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C]

<7> [301.554974] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:56:pipe A]

<7> [301.555372] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [301.555961] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power on

<7> [301.556446] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (94 ms remaining)

<7> [301.655709] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [301.730017] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [301.731405] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power on

<7> [301.733114] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003

<7> [301.781768] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [301.783008] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long

<7> [301.784170] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [301.785350] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A]

<7> [301.939549] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [301.940970] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [301.944015] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [301.947091] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turning VDD on

<7> [301.948715] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b

<7> [301.954496] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [301.955423] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [301.958580] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [301.959824] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [301.960989] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [301.964207] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Clock recovery OK

<7> [301.965353] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [301.966481] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [301.970508] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [301.971637] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [301.972785] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [301.976364] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [301.977812] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [301.980009] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [301.982817] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [301.983928] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [301.985713] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 37

<7> [301.990418] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 395 us, max time under evasion is 250 us

<7> [301.998793] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [302.006633] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1]

<7> [302.008358] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A]

<7> [302.015018] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [302.016068] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [302.022887] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [302.024980] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [302.026604] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [302.028388] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [302.030115] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [302.030154] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [302.032106] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [302.039550] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [302.039594] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [302.042094] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [302.048715] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [302.050900] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [302.052294] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [302.055044] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [302.056762] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [302.056799] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [302.058985] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [302.065195] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [302.065232] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [302.168999] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [302.169807] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [302.182453] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [302.207903] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [302.208362] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [302.221432] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [302.284127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [302.286379] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [302.294145] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [302.294786] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [302.295187] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [302.295635] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [302.296237] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [302.296843] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [302.297536] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [302.298125] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [302.298736] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [302.299968] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [302.393021] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [302.394568] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [302.395783] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [302.397004] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<6> [302.404723] Console: switching to colour dummy device 80x25

<7> [302.412842] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:107] is removed

<7> [302.413231] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [302.415352] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [302.417018] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [302.418633] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [302.420306] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [302.422833] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [302.449155] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [302.453492] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [302.454863] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [302.456180] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [302.457468] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [302.458751] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [302.460010] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [302.461335] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [302.462586] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [302.463765] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [302.464873] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [302.465899] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [302.467056] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [302.468158] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [302.469323] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [302.470259] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [302.471313] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [302.472748] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [302.473857] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [302.475071] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [302.476069] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [302.477218] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [302.478217] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [302.479375] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [302.480375] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [302.481789] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [302.483073] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [302.484233] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [302.485312] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [302.486539] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [302.487574] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [302.488760] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [302.489755] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [302.490934] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [302.492132] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [302.493594] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [302.495077] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [302.496552] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [302.498003] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [302.499219] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [302.500326] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset

<7> [302.501566] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:56:pipe A] releasing DPLL 0

<7> [302.503446] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [302.505061] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [302.506805] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [302.508071] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [302.509105] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [302.510540] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [302.511606] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [modeset]

<7> [302.512583] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [302.513549] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [302.514479] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [302.516176] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [302.719570] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 0

<7> [302.721866] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [302.735064] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power off

<7> [302.735572] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [302.736213] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [302.736757] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - short

<7> [302.737383] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [302.788565] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [302.788983] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [302.789797] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long

<7> [302.791203] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [302.791662] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:56:pipe A]

<7> [302.791745] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:105:DDI A/PHY A]

<7> [302.794251] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [302.794465] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A]

<7> [302.796385] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [302.799850] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A]

<7> [302.801470] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B]

<7> [302.803151] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A]

<7> [302.804729] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B]

<7> [302.806107] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C]

<7> [302.807520] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C]

<7> [302.808898] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A]

<7> [302.810461] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B]

<7> [302.811700] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C]

<7> [302.813473] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1]

<7> [302.816459] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A]

<7> [302.883969] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [302.927937] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:106:eDP-1] removing connector from sysfs

<7> [302.938407] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:114:DP-1] removing connector from sysfs

<7> [302.943060] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:123:HDMI-A-1] removing connector from sysfs

<7> [302.954220] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:129:DP-2] removing connector from sysfs

<7> [302.959484] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:135:HDMI-A-2] removing connector from sysfs

<7> [302.991485] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (299 ms remaining)

<7> [303.295871] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [303.335654] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<6> [304.018097] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS

<6> [304.019211] [IGT] i915_pm_rpm: exiting, ret=0

Results for igt@i915_pm_rpm@module-reload