igt@i915_pm_rpm@module-reload on fi-skl-6600u@IGT

Detail	Value
Duration	12.74 seconds
Igt-Version	IGT-Version: 2.2-g784deedaa (x86_64) (Linux: 6.18.0-rc6-CI_DRM_17572-ga95032b2166b+ x86_64)
Out	Using IGT_SRANDOM=1763592775 for randomisation Opened device: /dev/dri/card1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff88810b2717f8 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x64/0x220 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x1f/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] hsw_get_pipe_config+0x1bb/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x750 [i915] intel_atomic_commit_tail+0x121e/0x1c40 [i915] intel_atomic_commit+0x2e5/0x330 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x407/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 __x64_sys_ioctl+0xa5/0x100 Starting subtest: module-reload Reloading i915 with disable_display=1 mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 2 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff88810ca017f8 has 1/2 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x64/0x220 [i915] i915_display_rpm_get+0x1a/0x30 [i915] intel_display_rpm_get+0x1e/0x30 [i915] intel_display_power_get+0x22/0x70 [i915] intel_audio_component_get_power+0x2f/0x180 [i915] snd_hdac_display_power+0x86/0x140 [snd_hda_core] azx_probe_continue+0x24f/0x9c0 [snd_hda_intel] azx_probe_work+0x15/0x20 [snd_hda_intel] process_one_work+0x22e/0x6f0 worker_thread+0x1e8/0x3d0 kthread+0x11f/0x250 ret_from_fork+0x2d7/0x310 ret_from_fork_asm+0x1a/0x30 ref_tracker: intel_runtime_pm@ffff88810ca017f8 has 1/2 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x64/0x220 [i915] i915_display_rpm_get+0x1a/0x30 [i915] intel_display_rpm_get+0x1e/0x30 [i915] intel_display_power_get+0x22/0x70 [i915] intel_pps_vdd_on_unlocked+0xbd/0x360 [i915] intel_dp_aux_xfer+0x122/0x810 [i915] intel_dp_aux_transfer+0xd4/0x340 [i915] drm_dp_dpcd_access+0xc3/0x160 [drm_display_helper] drm_dp_dpcd_read+0x87/0x160 [drm_display_helper] intel_alpm_init+0x39/0x90 [i915] intel_dp_init_connector+0x9c1/0x14e0 [i915] intel_ddi_init+0xcef/0x1210 [i915] intel_bios_for_each_encoder+0x39/0x60 [i915] intel_setup_outputs+0x1f4/0xc20 [i915] intel_display_driver_probe_nogem+0x16a/0x260 [i915] Reloading i915 with mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff88813f89d7f8 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x64/0x220 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x1f/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] hsw_get_pipe_config+0x1bb/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x750 [i915] intel_atomic_commit_tail+0x121e/0x1c40 [i915] intel_atomic_commit+0x2e5/0x330 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x407/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 __x64_sys_ioctl+0xa5/0x100 Subtest module-reload: SUCCESS (12.740s)
Err	Starting subtest: module-reload Subtest module-reload: SUCCESS (12.740s)
Dmesg	<6> [281.419363] Console: switching to colour dummy device 80x25 <6> [281.420951] [IGT] i915_pm_rpm: executing <7> [281.424929] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [281.425659] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] <7> [281.425673] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1] <7> [281.426294] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [281.426547] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [281.426928] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [281.427340] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [281.427353] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor <7> [281.427362] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0 <7> [281.427413] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no <7> [281.427771] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [281.428125] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [281.430029] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes: <7> [281.430038] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [281.430046] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [281.430147] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] <7> [281.430154] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [281.434488] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected <7> [281.434648] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] <7> [281.434659] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [281.435476] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [281.435764] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [281.436222] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [281.436506] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [281.436513] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [281.436853] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [281.439982] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [281.439992] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [281.440292] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected <7> [281.440386] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] <7> [281.440393] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [281.444766] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected <7> [281.444885] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] <7> [281.444896] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [281.445523] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [281.445912] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [281.446440] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [281.446842] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [281.446851] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [281.447194] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [281.450377] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [281.450387] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [281.450805] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected <7> [281.459857] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] <7> [281.459868] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [281.464226] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected <7> [281.464967] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] <7> [281.464976] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [281.465481] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [281.465766] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [281.466214] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [281.466493] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [281.466502] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [281.466806] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [281.469854] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [281.469864] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [281.470167] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected <7> [281.470879] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] <7> [281.470895] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [281.475215] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected <7> [281.475917] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] <7> [281.475926] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [281.476415] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [281.476687] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [281.477139] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [281.477389] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [281.477397] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [281.477721] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [281.480784] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [281.480792] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [281.481064] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected <7> [281.481567] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] <7> [281.481575] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1] <7> [281.481905] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [281.482181] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [281.482397] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [281.482692] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [281.482705] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor <7> [281.482713] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0 <7> [281.482748] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no <7> [281.482992] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [281.483275] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [281.484783] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes: <7> [281.484793] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [281.484800] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [281.484834] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] <7> [281.484841] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [281.489175] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected <7> [281.489226] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] <7> [281.489233] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [281.489703] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [281.490045] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [281.490551] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [281.490918] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [281.490927] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [281.491251] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [281.494352] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [281.494362] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [281.494683] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected <7> [281.494740] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] <7> [281.494751] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [281.499081] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected <7> [281.499112] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] <7> [281.499119] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [281.499619] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [281.499863] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [281.500257] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [281.500513] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [281.500520] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [281.500771] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [281.503820] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [281.503828] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [281.504092] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected <7> [281.504636] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:140] <7> [281.579987] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [282.548736] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:56:pipe A] <7> [282.549121] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [282.549428] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [282.549731] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [282.550051] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [282.550314] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [282.550605] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [282.550910] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [282.551177] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [282.551429] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [282.551703] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [282.552013] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [282.552266] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [282.552517] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [282.552818] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [282.553112] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [282.553366] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [282.553636] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [282.553927] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [282.554184] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [282.554424] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [282.554683] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [282.554970] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [282.555212] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [282.555453] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [282.555719] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [282.556000] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [282.556242] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [282.556514] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [282.556789] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [282.557059] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [282.557303] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [282.557646] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [282.557958] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [282.558202] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [282.558454] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [282.558793] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [282.559056] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [282.559300] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [282.559593] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [282.559972] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset <7> [282.560363] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:56:pipe A] releasing DPLL 0 <7> [282.560813] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [282.561212] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [282.561598] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [282.561970] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [282.562319] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [282.562670] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [282.562939] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [282.563239] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [282.563509] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz <7> [282.563823] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [282.564186] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [282.564564] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [282.564960] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [modeset] <7> [282.565336] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [282.565723] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [282.565971] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [282.566383] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [282.568202] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [282.778063] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 0 <7> [282.780044] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [282.793220] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power off <7> [282.793749] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [282.794321] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power off time <7> [282.795079] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - short <7> [282.795761] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [282.846974] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [282.847495] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [282.848354] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long <7> [282.849680] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [282.849797] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [282.852366] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:105:DDI A/PHY A] <7> [282.852768] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:56:pipe A] <7> [282.853682] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A] <7> [282.854675] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [282.856112] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [282.859195] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A] <7> [282.860735] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B] <7> [282.862076] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A] <7> [282.863419] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B] <7> [282.864723] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C] <7> [282.866136] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C] <7> [282.867455] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A] <7> [282.868814] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B] <7> [282.869873] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C] <7> [282.871081] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1] <7> [282.873744] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A] <7> [282.876217] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:80:pipe B] <7> [282.877420] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:104:pipe C] <7> [282.978108] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [282.980193] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [282.981887] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [282.983988] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [282.988738] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [283.006802] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [283.089460] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:106:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [283.090695] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:105:DDI A/PHY A][CRTC:56:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 max link_bpp 24.0000 <7> [283.092125] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000 <7> [283.093249] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [283.094440] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:105:DDI A/PHY A] [CRTC:56:pipe A] <7> [283.095425] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [283.096854] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [283.098053] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [283.100704] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [283.102046] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [283.103459] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [283.104655] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [283.106161] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [283.107191] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [283.108400] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [283.109477] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [283.110853] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [283.111872] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [283.113129] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [283.114170] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [283.115370] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [283.116441] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [283.117681] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [283.118690] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [283.119924] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [283.121019] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [283.122383] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [283.123762] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [283.125302] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [283.126834] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [283.128360] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [283.129881] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [283.131231] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [283.132276] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [283.133694] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [283.135250] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [283.136789] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [283.138308] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [283.139837] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [283.141129] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [283.142466] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [283.143514] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [283.144735] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [283.145781] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [283.147087] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset <7> [283.148336] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [283.149507] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [283.150523] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [283.151902] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [283.153319] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [283.154803] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [283.156308] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [283.158133] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [283.159766] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [283.160975] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [283.161885] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [283.163176] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [283.164538] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:56:pipe A] allocated DPLL 0 <7> [283.165875] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:56:pipe A] reserving DPLL 0 <7> [283.167231] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: yes [modeset] <7> [283.168544] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [283.169507] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [283.170525] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [283.171410] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [283.172487] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [283.173376] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [283.174449] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [283.175386] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [283.176461] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [283.177333] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [283.178538] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [283.179611] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [283.180517] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [283.181786] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [283.183109] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [283.184443] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [283.185770] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [283.187066] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [283.187909] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [283.188534] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [283.189141] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [283.189863] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [283.190410] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [283.191021] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [283.191736] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [283.192312] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [283.192904] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [283.193744] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [283.194358] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [283.194971] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [283.195563] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [283.196148] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [283.196599] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [283.197096] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [283.197504] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [283.197972] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [283.198492] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [283.199150] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [283.199695] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [283.200124] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [283.200532] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [283.200973] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [283.201478] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:107] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [283.201945] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [283.202438] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [283.202899] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [283.203516] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [283.215688] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [283.224349] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [283.224760] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [283.225395] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [283.226182] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [283.226953] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [283.227892] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A] <7> [283.228282] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B] <7> [283.228683] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A] <7> [283.229053] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B] <7> [283.229419] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C] <7> [283.229826] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C] <7> [283.230193] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A] <7> [283.230561] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B] <7> [283.230947] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C] <7> [283.231596] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:56:pipe A] <7> [283.232003] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [283.232598] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power on <7> [283.233070] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (117 ms remaining) <7> [283.354046] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [283.424423] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [283.425691] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power on <7> [283.427208] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003 <7> [283.475978] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [283.477095] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long <7> [283.478116] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [283.479226] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A] <7> [283.633997] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [283.635513] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [283.637056] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [283.640446] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turning VDD on <7> [283.642343] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b <7> [283.650301] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [283.651567] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [283.655352] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [283.656961] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [283.658505] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [283.662326] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Clock recovery OK <7> [283.664076] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [283.665556] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [283.669970] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [283.671653] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [283.673187] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [283.677308] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [283.678828] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [283.681473] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [283.684932] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [283.686415] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [283.688490] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 37 <7> [283.700712] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [283.708449] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1] <7> [283.710292] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A] <7> [283.715473] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [283.716108] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [283.721173] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <6> [283.723292] [IGT] i915_pm_rpm: starting subtest module-reload <7> [283.723377] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [283.724716] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [283.726182] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [283.727500] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [283.727534] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [283.728813] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [283.734797] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [283.734834] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [283.736646] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [283.742748] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [283.744529] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [283.745881] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [283.747986] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [283.749427] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [283.749462] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [283.751298] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [283.757358] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [283.757396] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [283.869131] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [283.869974] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [283.882769] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [283.908171] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [283.908553] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [283.921757] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [283.968651] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [283.972849] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [283.982654] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [283.983261] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [283.986456] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [283.987037] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [283.991421] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [283.992009] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [283.992540] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [283.993341] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [283.994671] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [284.005813] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [284.105861] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [284.106835] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [284.107267] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [284.107678] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [284.118955] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:107] is removed <7> [284.119136] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [284.120848] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [284.121865] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [284.122818] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [284.123784] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [284.126039] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [284.134330] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [284.137927] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [284.138725] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [284.139480] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [284.140189] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [284.141340] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [284.142265] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [284.143252] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [284.144160] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [284.145098] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [284.146011] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [284.146908] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [284.147811] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [284.148786] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [284.149692] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [284.150560] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [284.151476] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [284.152396] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [284.153295] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [284.154192] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [284.155121] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [284.156014] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [284.156916] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [284.157807] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [284.158708] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [284.159599] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [284.160460] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [284.161368] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [284.162268] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [284.163175] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [284.164068] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [284.164975] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [284.165869] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [284.166775] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [284.167680] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [284.168515] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [284.169415] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [284.170315] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [284.171217] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [284.172116] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [284.173046] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset <7> [284.173954] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:56:pipe A] releasing DPLL 0 <7> [284.174975] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [284.175993] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [284.177088] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [284.178001] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [284.178889] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [284.179779] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [284.180692] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [modeset] <7> [284.181556] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [284.182465] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [284.183360] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [284.185344] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [284.394052] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 0 <7> [284.396425] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [284.404259] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power off <7> [284.404740] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [284.405389] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power off time <7> [284.406061] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - short <7> [284.406439] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [284.457986] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [284.459267] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long <7> [284.459676] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [284.460455] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [284.461678] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:105:DDI A/PHY A] <7> [284.462356] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:56:pipe A] <7> [284.463332] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A] <7> [284.464748] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [284.466516] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [284.470505] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A] <7> [284.472558] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B] <7> [284.474414] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A] <7> [284.476066] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B] <7> [284.477757] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C] <7> [284.479540] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C] <7> [284.481129] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A] <7> [284.482809] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B] <7> [284.484382] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C] <7> [284.485903] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1] <7> [284.488990] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A] <7> [284.566338] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [284.609781] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:106:eDP-1] removing connector from sysfs <7> [284.622858] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:114:DP-1] removing connector from sysfs <7> [284.628293] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:123:HDMI-A-1] removing connector from sysfs <7> [284.640918] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:129:DP-2] removing connector from sysfs <7> [284.644479] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:135:HDMI-A-2] removing connector from sysfs <7> [284.665201] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (296 ms remaining) <7> [284.970323] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [285.032676] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [285.736383] [IGT] Reloading i915 w/o display <5> [286.511952] Setting dangerous option force_probe - tainting kernel <6> [286.523852] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0 <7> [286.525645] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K <7> [286.526156] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [286.526420] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH <7> [286.526702] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [286.527121] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [286.527730] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [286.528082] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [286.529254] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [286.529488] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [286.529712] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [286.529961] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [286.529971] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [286.530666] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [286.530721] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [286.530994] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [286.531227] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7717 MiB [mem 0x00000000-0x1e252ffff], io: n/a <7> [286.531417] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a <7> [286.532275] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018 <7> [286.532688] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [286.532954] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [286.533218] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [286.533466] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [286.541614] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [286.541896] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [286.542168] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [286.542424] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [286.542736] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [286.543090] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [286.543412] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no <7> [286.543762] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [286.544085] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [286.544407] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no <7> [286.544741] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes <7> [286.545066] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no <7> [286.545393] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3 <7> [286.545734] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [286.546058] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0 <7> [286.546382] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7> [286.547461] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [286.547911] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203 <7> [286.548325] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [286.548749] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [286.549160] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [286.549584] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [286.549998] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 848) <7> [286.550408] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [286.550830] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [286.551246] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [286.551682] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [286.552096] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136) <7> [286.552495] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [286.552907] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [286.553305] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [286.553730] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [286.554142] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [286.554552] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [286.554956] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [286.555357] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [286.555767] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [286.556169] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [286.556575] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [286.556936] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [286.557346] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [286.557786] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [286.558303] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [286.558748] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [286.559160] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [286.559574] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [286.559973] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [286.560374] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [286.560908] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [286.561310] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [286.561732] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [286.562153] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [286.562674] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [286.563084] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [286.563489] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [286.563912] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [286.565181] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <7> [286.566375] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [286.567882] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [286.568354] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [286.568811] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [286.569234] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [286.570536] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [286.571110] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [286.571537] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7> [286.571966] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec) <7> [286.572395] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec) <7> [286.572811] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec) <7> [286.573214] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec) <7> [286.573632] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec) <7> [286.574037] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec) <7> [286.574440] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec) <7> [286.574852] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec) <7> [286.575253] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec) <7> [286.575664] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec) <7> [286.576084] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec) <7> [286.576500] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec) <7> [286.576928] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec) <7> [286.577352] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec) <7> [286.577718] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec) <6> [286.578537] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [286.583268] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [286.592791] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [286.593156] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:105:DDI A/PHY A] Using AUX CH A (VBT) <7> [286.593487] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:105:DDI A/PHY A] <7> [286.601667] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [286.601989] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [286.602256] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [286.602518] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [286.603036] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [286.603474] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [286.603927] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP <7> [286.604350] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [286.604770] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0 <7> [286.605183] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0 <7> [286.605776] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:105:DDI A/PHY A] initial power sequencer: PPS 0 <7> [286.606244] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [286.606723] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [286.607125] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [286.607526] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [286.607947] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [286.608409] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [286.609096] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turning VDD on <7> [286.609521] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [286.609965] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [286.619756] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [286.620090] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [286.620347] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [286.828182] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [286.829101] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [286.831004] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00 <7> [286.836094] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [286.855724] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [286.855773] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor <7> [286.855805] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0 <7> [286.856190] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:106:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [286.857634] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:106:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [286.859616] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:106:eDP-1] DRRS type: static <7> [286.862062] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:106:eDP-1] Using native PCH PWM for backlight control <7> [286.864114] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:106:eDP-1] backlight initialized, disabled, brightness 0/937 <7> [286.867061] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [286.869010] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [286.870576] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [286.871717] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [286.872862] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [286.874056] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [286.876408] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:113:DDI B/PHY B] Using AUX CH B (VBT) <7> [286.877547] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:113:DDI B/PHY B] <7> [286.880204] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [286.881152] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:113:DDI B/PHY B] <7> [286.882001] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:113:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [286.883935] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:128:DDI C/PHY C] Using AUX CH C (VBT) <7> [286.884717] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:128:DDI C/PHY C] <7> [286.886394] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [286.887132] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:128:DDI C/PHY C] <7> [286.887779] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:128:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [286.889744] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:56:pipe A] hw state readout: disabled <7> [286.890737] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe B] hw state readout: disabled <7> [286.891728] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:104:pipe C] hw state readout: disabled <7> [286.892390] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [286.893014] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] hw state readout: disabled, pipe A <7> [286.893623] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] hw state readout: disabled, pipe A <7> [286.894165] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:57:plane 1B] hw state readout: disabled, pipe B <7> [286.894790] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:66:plane 2B] hw state readout: disabled, pipe B <7> [286.895390] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:75:cursor B] hw state readout: disabled, pipe B <7> [286.896013] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 1C] hw state readout: disabled, pipe C <7> [286.896667] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:90:plane 2C] hw state readout: disabled, pipe C <7> [286.897261] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:99:cursor C] hw state readout: disabled, pipe C <7> [286.897907] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:105:DDI A/PHY A] hw state readout: disabled, pipe A <7> [286.898506] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:113:DDI B/PHY B] hw state readout: disabled, pipe A <7> [286.899080] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:115:DP-MST A] hw state readout: disabled, pipe A <7> [286.899637] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:116:DP-MST B] hw state readout: disabled, pipe B <7> [286.900166] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DP-MST C] hw state readout: disabled, pipe C <7> [286.901235] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:128:DDI C/PHY C] hw state readout: disabled, pipe A <7> [286.901723] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:130:DP-MST A] hw state readout: disabled, pipe A <7> [286.902183] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:131:DP-MST B] hw state readout: disabled, pipe B <7> [286.902664] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:132:DP-MST C] hw state readout: disabled, pipe C <7> [286.903184] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [286.903805] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [286.904318] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [286.904841] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [286.905480] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:106:eDP-1] hw state readout: disabled <7> [286.906057] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:114:DP-1] hw state readout: disabled <7> [286.906627] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:123:HDMI-A-1] hw state readout: disabled <7> [286.907184] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:129:DP-2] hw state readout: disabled <7> [286.907755] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:135:HDMI-A-2] hw state readout: disabled <7> [286.908210] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [286.908631] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] min_cdclk 0 kHz <7> [286.909040] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] min_cdclk 0 kHz <7> [286.909451] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:56:pipe A] min_cdclk 0 kHz <7> [286.909880] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:57:plane 1B] min_cdclk 0 kHz <7> [286.910292] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:66:plane 2B] min_cdclk 0 kHz <7> [286.910714] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:75:cursor B] min_cdclk 0 kHz <7> [286.911150] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe B] min_cdclk 0 kHz <7> [286.911588] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 1C] min_cdclk 0 kHz <7> [286.912014] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:90:plane 2C] min_cdclk 0 kHz <7> [286.912440] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:99:cursor C] min_cdclk 0 kHz <7> [286.912877] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:104:pipe C] min_cdclk 0 kHz <7> [286.913313] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:56:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [286.913732] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:80:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [286.914139] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:104:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [286.914748] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [setup_hw_state] <7> [286.915167] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe B] enable: no [setup_hw_state] <7> [286.915596] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:104:pipe C] enable: no [setup_hw_state] <7> [286.916027] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [286.916509] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [286.916876] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [286.917238] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [286.917660] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7> [286.920609] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [286.921052] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [286.921465] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0 <7> [286.946398] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [286.946692] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [286.946895] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [286.947111] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [286.947319] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 0: start 0x8 <7> [286.947607] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 1: start 0x108 <7> [286.948017] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 2: start 0x208 <7> [286.948429] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 3: start 0x308 <7> [286.948866] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 4: start 0x3c8 <7> [286.949281] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 0: start 0x8 <7> [286.949707] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 1: start 0x108 <7> [286.950124] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 2: start 0x208 <7> [286.950544] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 3: start 0x308 <7> [286.951075] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 4: start 0x3c8 <7> [286.951491] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 0: start 0x8 <7> [286.951916] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 1: start 0x108 <7> [286.952331] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 2: start 0x208 <7> [286.952769] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 3: start 0x308 <7> [286.953185] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 4: start 0x3c8 <7> [286.953926] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [fastset] <7> [286.954347] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe B] enable: no [fastset] <7> [286.954774] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:104:pipe C] enable: no [fastset] <7> [286.955485] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A] <7> [286.956431] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe B] <7> [286.957123] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:104:pipe C] <7> [286.957802] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [286.964460] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:106:eDP-1] adding connector to sysfs <7> [286.965863] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:106:eDP-1] backlight device intel_backlight registered <7> [286.966232] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:106:eDP-1] Registered panel device 'card1-eDP-1', has fwnode: yes <7> [286.967249] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card1-eDP-1 <7> [286.969768] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:106:eDP-1] generating connector hotplug event <7> [286.969911] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:114:DP-1] adding connector to sysfs <7> [286.971457] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card1-DP-1 <7> [286.973712] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:114:DP-1] generating connector hotplug event <7> [286.973862] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:123:HDMI-A-1] adding connector to sysfs <7> [286.977679] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:123:HDMI-A-1] generating connector hotplug event <7> [286.977831] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:129:DP-2] adding connector to sysfs <7> [286.981985] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card1-DP-2 <7> [286.985951] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:129:DP-2] generating connector hotplug event <7> [286.986076] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:135:HDMI-A-2] adding connector to sysfs <7> [286.988971] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:135:HDMI-A-2] generating connector hotplug event <6> [286.989065] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 1 <7> [286.996009] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [287.032172] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [287.042481] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input35 <7> [287.045808] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [287.051091] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [287.051574] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:114:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [287.052000] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [287.052396] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:123:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [287.053366] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [287.053816] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:129:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [287.054233] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [287.054646] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:135:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [287.055057] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [287.055666] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:56:pipe A] not active, skipping <7> [287.056089] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:80:pipe B] not active, skipping <7> [287.056479] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:104:pipe C] not active, skipping <7> [287.056905] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config <7> [287.059158] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [287.060224] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [287.060380] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] <7> [287.060394] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1] <7> [287.060841] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] status updated from unknown to disconnected <7> [287.060862] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] disconnected <7> [287.060885] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [287.061245] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:106:eDP-1] EDID changed, epoch counter 2 <7> [287.061275] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] <7> [287.061287] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [287.061725] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected <7> [287.061948] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] <7> [287.061961] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [287.062357] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected <7> [287.062370] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] <7> [287.062380] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [287.062811] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected <7> [287.063018] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] <7> [287.063032] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [287.063430] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected <7> [287.063441] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [287.063449] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] enabled? no <7> [287.063458] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:114:DP-1] enabled? no <7> [287.063465] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:123:HDMI-A-1] enabled? no <7> [287.063473] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:129:DP-2] enabled? no <7> [287.063481] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:135:HDMI-A-2] enabled? no <7> [287.063537] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [287.063579] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [287.064407] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [287.064426] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [287.067044] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9 <7> [287.067523] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0 <7> [287.067973] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7> [287.068389] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no <7> [287.068818] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no <7> [287.069235] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7> [287.069661] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7> [287.070074] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no <7> [287.070481] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7> [287.070915] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7> [287.071329] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7> [287.071778] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7> [287.072193] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7> [287.072632] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7> [287.073048] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7> [287.073463] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes <7> [287.073905] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7> [287.074316] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7> [287.074740] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7> [287.075150] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7> [287.075576] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no <7> [287.075986] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz <7> [287.076938] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [287.077076] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] <7> [287.077091] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1] <7> [287.077500] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] disconnected <7> [287.077515] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] <7> [287.077525] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [287.077940] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected <7> [287.077952] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] <7> [287.077963] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [287.078354] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected <7> [287.078366] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] <7> [287.078376] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [287.078774] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected <7> [287.078786] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] <7> [287.078796] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [287.079193] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected <7> [287.079204] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [287.079213] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] enabled? no <7> [287.079221] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:114:DP-1] enabled? no <7> [287.079229] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:123:HDMI-A-1] enabled? no <7> [287.079236] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:129:DP-2] enabled? no <7> [287.079244] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:135:HDMI-A-2] enabled? no <7> [287.079303] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [287.079320] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [287.079369] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [287.079399] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [287.079404] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [287.080499] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7> [287.080937] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [287.081367] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [287.081805] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [287.082227] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [287.082662] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [287.083442] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9 <7> [287.084349] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9 <7> [287.084695] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9 <7> [287.085014] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0 <7> [287.085325] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0 <7> [287.085654] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2 <7> [287.085970] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21 <7> [287.086293] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000 <7> [287.086692] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE <7> [287.087020] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7> [287.087345] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7> [287.087687] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39 <7> [287.088012] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7> [287.088339] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7> [287.088762] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7> [287.089087] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7> [287.089416] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7> [287.089770] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7> [287.090097] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7> [287.090422] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7> [287.090758] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7> [287.091085] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no <7> [287.091414] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no <7> [287.091756] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7> [287.092081] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7> [287.092408] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7> [287.092755] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no <7> [287.093078] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no <7> [287.093398] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7> [287.093732] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7> [287.094049] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes <7> [287.094364] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7> [287.094692] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no <7> [287.095017] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7> [287.095343] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7> [287.095681] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no <7> [287.096005] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no <7> [287.096333] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no <7> [287.096681] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7> [287.097010] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no <7> [287.097332] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7> [287.097676] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7> [287.098004] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7> [287.098329] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7> [287.098668] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no <7> [287.098987] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes <7> [287.099312] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7> [287.099649] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7> [287.099971] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7> [287.100296] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7> [287.100626] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7> [287.100945] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403 <7> [287.101271] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001 <7> [287.101619] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3 <7> [287.101946] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007 <7> [287.102271] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000 <7> [287.102614] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000 <7> [287.102935] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24 <7> [287.103257] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8 <7> [287.103598] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7> [287.103917] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7> [287.104234] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes <6> [287.104551] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [287.104574] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [287.104579] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [287.119929] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6> [287.121804] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7> [287.122341] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [287.123157] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [287.126102] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [287.155747] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [287.156030] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [287.156263] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [287.156492] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [287.157200] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [287.157449] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [287.157705] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [287.157934] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [287.158162] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <6> [287.187187] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36 <6> [287.193344] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input37 <6> [287.200096] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input38 <7> [288.335184] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [289.396830] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turning VDD off <7> [289.397744] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [289.398614] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [289.400005] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [289.401381] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long <7> [289.402760] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [289.406366] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A] <7> [289.406220] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [289.407625] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [289.410662] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [289.414602] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [289.433666] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [289.550784] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [289.575749] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [289.582665] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [289.583000] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [289.583257] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [289.583474] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [289.583715] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [289.583959] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [289.584046] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [289.584746] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [289.585383] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [289.586994] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [289.599733] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [289.600070] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [289.600327] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [289.600596] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [289.601289] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [289.708043] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [289.708332] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [289.709302] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [289.709942] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [289.711914] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [289.719035] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [289.719308] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [289.719531] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [289.719847] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [289.720184] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [289.720519] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [289.720863] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [289.721194] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [289.721485] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [289.722266] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [289.723141] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [289.723521] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [289.723908] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [289.724673] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [289.812900] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [289.813588] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [289.814742] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [289.816069] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [289.818041] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [289.819490] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [289.820755] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [289.822253] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [289.823716] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [289.879108] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [289.897791] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:106:eDP-1] removing connector from sysfs <7> [289.906375] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:114:DP-1] removing connector from sysfs <7> [289.907952] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:123:HDMI-A-1] removing connector from sysfs <7> [289.915401] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:129:DP-2] removing connector from sysfs <7> [289.921148] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:135:HDMI-A-2] removing connector from sysfs <7> [289.948863] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [289.949279] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [289.959773] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [290.473399] [IGT] Reloading i915 as normal <5> [291.260080] Setting dangerous option force_probe - tainting kernel <6> [291.271598] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0 <7> [291.273263] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K <7> [291.273865] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [291.274174] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH <7> [291.274428] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [291.274753] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [291.275213] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [291.275439] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [291.276427] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [291.276667] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [291.276883] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [291.277094] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [291.277103] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [291.277758] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [291.277797] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [291.278046] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [291.278277] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7717 MiB [mem 0x00000000-0x1e252ffff], io: n/a <7> [291.278468] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a <7> [291.279259] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018 <7> [291.279731] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [291.280109] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [291.280479] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [291.280842] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [291.287556] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [291.287843] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [291.288085] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [291.288326] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [291.288605] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [291.288854] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [291.289040] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no <7> [291.289225] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [291.289408] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [291.289609] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no <7> [291.289874] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes <7> [291.290059] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no <7> [291.290241] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3 <7> [291.290423] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [291.290665] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0 <7> [291.290938] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7> [291.291716] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [291.291994] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203 <7> [291.292252] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [291.292508] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [291.292891] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [291.293236] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [291.293491] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 848) <7> [291.293843] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [291.294128] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [291.294400] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [291.294689] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [291.294990] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136) <7> [291.295236] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [291.295481] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [291.295750] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [291.296055] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [291.296380] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [291.296669] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [291.296974] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [291.297222] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [291.297467] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [291.297729] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [291.298029] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [291.298275] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [291.298528] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [291.298822] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [291.299290] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [291.299596] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [291.299909] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [291.300161] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [291.300405] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [291.300678] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [291.301074] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [291.301326] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [291.301600] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [291.301975] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [291.302302] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [291.302583] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [291.302907] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [291.303166] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [291.304059] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <7> [291.305226] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [291.305510] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [291.305800] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [291.306109] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [291.307626] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [291.308223] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [291.308587] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [291.308846] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7> [291.309098] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec) <7> [291.309348] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec) <7> [291.309623] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec) <7> [291.309874] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec) <7> [291.310126] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec) <7> [291.310376] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec) <7> [291.310735] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec) <7> [291.311027] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec) <7> [291.311277] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec) <7> [291.311527] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec) <7> [291.311828] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec) <7> [291.312133] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec) <7> [291.312385] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec) <7> [291.312683] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec) <7> [291.312979] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec) <6> [291.313341] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [291.317438] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [291.321147] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [291.321626] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:105:DDI A/PHY A] Using AUX CH A (VBT) <7> [291.322051] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:105:DDI A/PHY A] <7> [291.330619] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [291.331045] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [291.331431] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [291.331829] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [291.332228] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [291.332619] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [291.333003] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP <7> [291.333383] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [291.333804] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0 <7> [291.334189] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0 <7> [291.335454] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:105:DDI A/PHY A] initial power sequencer: PPS 0 <7> [291.335912] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [291.336278] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [291.336658] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [291.337018] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [291.337376] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [291.337805] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [291.338459] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turning VDD on <7> [291.338883] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [291.339296] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [291.349602] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [291.349923] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [291.350171] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [291.556285] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [291.557971] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [291.559427] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00 <7> [291.562788] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [291.578269] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [291.578312] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor <7> [291.578340] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0 <7> [291.578863] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:106:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [291.580049] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:106:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [291.581379] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:106:eDP-1] DRRS type: static <7> [291.582910] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:106:eDP-1] Using native PCH PWM for backlight control <7> [291.584222] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:106:eDP-1] backlight initialized, disabled, brightness 0/937 <7> [291.586202] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [291.587337] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [291.588458] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [291.589782] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [291.590869] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [291.592295] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [291.594838] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:113:DDI B/PHY B] Using AUX CH B (VBT) <7> [291.596507] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:113:DDI B/PHY B] <7> [291.602046] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [291.603612] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:113:DDI B/PHY B] <7> [291.605232] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:113:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [291.608988] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:128:DDI C/PHY C] Using AUX CH C (VBT) <7> [291.610848] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:128:DDI C/PHY C] <7> [291.614783] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [291.616663] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:128:DDI C/PHY C] <7> [291.618307] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:128:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [291.622531] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:56:pipe A] hw state readout: disabled <7> [291.624415] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe B] hw state readout: disabled <7> [291.626171] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:104:pipe C] hw state readout: disabled <7> [291.627364] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [291.628590] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] hw state readout: disabled, pipe A <7> [291.629787] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] hw state readout: disabled, pipe A <7> [291.631007] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:57:plane 1B] hw state readout: disabled, pipe B <7> [291.632159] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:66:plane 2B] hw state readout: disabled, pipe B <7> [291.633029] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:75:cursor B] hw state readout: disabled, pipe B <7> [291.633986] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 1C] hw state readout: disabled, pipe C <7> [291.634814] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:90:plane 2C] hw state readout: disabled, pipe C <7> [291.635453] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:99:cursor C] hw state readout: disabled, pipe C <7> [291.636077] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:105:DDI A/PHY A] hw state readout: disabled, pipe A <7> [291.636841] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:113:DDI B/PHY B] hw state readout: disabled, pipe A <7> [291.637445] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:115:DP-MST A] hw state readout: disabled, pipe A <7> [291.638068] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:116:DP-MST B] hw state readout: disabled, pipe B <7> [291.638757] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DP-MST C] hw state readout: disabled, pipe C <7> [291.639326] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:128:DDI C/PHY C] hw state readout: disabled, pipe A <7> [291.639867] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:130:DP-MST A] hw state readout: disabled, pipe A <7> [291.640482] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:131:DP-MST B] hw state readout: disabled, pipe B <7> [291.641033] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:132:DP-MST C] hw state readout: disabled, pipe C <7> [291.641847] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [291.642478] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [291.643130] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [291.643809] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [291.644369] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:106:eDP-1] hw state readout: disabled <7> [291.644923] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:114:DP-1] hw state readout: disabled <7> [291.645453] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:123:HDMI-A-1] hw state readout: disabled <7> [291.646173] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:129:DP-2] hw state readout: disabled <7> [291.646780] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:135:HDMI-A-2] hw state readout: disabled <7> [291.647188] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [291.647622] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] min_cdclk 0 kHz <7> [291.648117] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] min_cdclk 0 kHz <7> [291.648522] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:56:pipe A] min_cdclk 0 kHz <7> [291.648986] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:57:plane 1B] min_cdclk 0 kHz <7> [291.649466] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:66:plane 2B] min_cdclk 0 kHz <7> [291.650037] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:75:cursor B] min_cdclk 0 kHz <7> [291.650513] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe B] min_cdclk 0 kHz <7> [291.650948] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 1C] min_cdclk 0 kHz <7> [291.651382] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:90:plane 2C] min_cdclk 0 kHz <7> [291.651845] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:99:cursor C] min_cdclk 0 kHz <7> [291.652264] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:104:pipe C] min_cdclk 0 kHz <7> [291.652732] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:56:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [291.653085] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:80:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [291.653434] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:104:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [291.654047] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [setup_hw_state] <7> [291.654403] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe B] enable: no [setup_hw_state] <7> [291.654760] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:104:pipe C] enable: no [setup_hw_state] <7> [291.655119] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [291.655523] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [291.655836] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [291.656143] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [291.656471] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7> [291.659670] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [291.660121] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [291.660447] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0 <7> [291.683172] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [291.683429] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [291.683646] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [291.683925] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [291.684122] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 0: start 0x8 <7> [291.684374] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 1: start 0x108 <7> [291.684656] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 2: start 0x208 <7> [291.684964] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 3: start 0x308 <7> [291.685221] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 4: start 0x3c8 <7> [291.685481] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 0: start 0x8 <7> [291.685993] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 1: start 0x108 <7> [291.686334] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 2: start 0x208 <7> [291.686706] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 3: start 0x308 <7> [291.687063] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 4: start 0x3c8 <7> [291.687321] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 0: start 0x8 <7> [291.687597] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 1: start 0x108 <7> [291.687910] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 2: start 0x208 <7> [291.688167] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 3: start 0x308 <7> [291.688422] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 4: start 0x3c8 <7> [291.688981] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [fastset] <7> [291.689329] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe B] enable: no [fastset] <7> [291.689625] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:104:pipe C] enable: no [fastset] <7> [291.690117] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A] <7> [291.690732] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe B] <7> [291.691150] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:104:pipe C] <7> [291.691581] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [291.699156] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:106:eDP-1] adding connector to sysfs <7> [291.702064] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:106:eDP-1] backlight device intel_backlight registered <7> [291.702447] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:106:eDP-1] Registered panel device 'card1-eDP-1', has fwnode: yes <7> [291.703512] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card1-eDP-1 <7> [291.707195] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:106:eDP-1] generating connector hotplug event <7> [291.707300] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:114:DP-1] adding connector to sysfs <7> [291.708844] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card1-DP-1 <7> [291.711707] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:114:DP-1] generating connector hotplug event <7> [291.711866] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:123:HDMI-A-1] adding connector to sysfs <7> [291.713326] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:123:HDMI-A-1] generating connector hotplug event <7> [291.713486] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:129:DP-2] adding connector to sysfs <7> [291.715061] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card1-DP-2 <7> [291.717839] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:129:DP-2] generating connector hotplug event <7> [291.717995] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:135:HDMI-A-2] adding connector to sysfs <7> [291.719436] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:135:HDMI-A-2] generating connector hotplug event <6> [291.719573] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 1 <7> [291.725328] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [291.760941] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [291.771230] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input39 <7> [291.774491] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [291.780121] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [291.781355] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:56:pipe A] not active, skipping <7> [291.781822] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:80:pipe B] not active, skipping <7> [291.782226] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:104:pipe C] not active, skipping <7> [291.782648] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config <7> [291.784853] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:114:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [291.785308] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [291.786346] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [291.786787] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [291.787369] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [291.788468] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [291.788482] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [291.788845] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [291.788943] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [291.789833] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [291.792508] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [291.792520] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [291.793215] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:123:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [291.793676] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [291.798214] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:129:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [291.798729] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [291.799415] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [291.799864] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [291.800706] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [291.801157] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [291.801168] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [291.803175] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [291.807219] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [291.807231] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [291.807912] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:135:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [291.809049] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] <7> [291.809061] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [291.809064] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1] <7> [291.809709] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [291.810120] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [291.810517] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [291.813149] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [291.813166] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor <7> [291.813176] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0 <7> [291.813215] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no <7> [291.813694] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [291.814097] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [291.816134] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] status updated from unknown to connected <7> [291.816171] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [291.816585] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes: <7> [291.816597] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [291.816608] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [291.816621] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] <7> [291.816668] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [291.821233] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected <7> [291.821252] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] <7> [291.821263] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [291.822279] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [291.822728] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [291.824258] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [291.824745] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [291.824757] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [291.825127] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [291.834164] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [291.834181] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [291.834856] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected <7> [291.834872] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] <7> [291.834884] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [291.839361] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected <7> [291.839376] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] <7> [291.839384] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [291.841619] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [291.842062] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [291.842672] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [291.843117] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [291.843128] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [291.843511] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [291.847059] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [291.847071] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [291.847581] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected <7> [291.847595] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] enabled? yes <7> [291.847604] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:114:DP-1] enabled? no <7> [291.847611] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:123:HDMI-A-1] enabled? no <7> [291.847618] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:129:DP-2] enabled? no <7> [291.847625] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:135:HDMI-A-2] enabled? no <7> [291.847682] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [291.847717] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] found preferred mode: 3200x1800 <7> [291.847726] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [291.847756] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:56:pipe A] desired mode 3200x1800 set (0,0) <7> [291.847828] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [291.847885] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] no BIOS fb, allocating a new one <7> [291.854870] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 3200x1800 fb: 0x00180000 <6> [291.856348] fbcon: i915drmfb (fb0) is primary device <6> [291.857318] Console: switching to colour frame buffer device 200x56 <6> [291.857335] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7> [291.864273] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [291.864291] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [291.864075] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9 <7> [291.864517] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0 <7> [291.865121] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] <7> [291.865144] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1] <7> [291.865146] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7> [291.865645] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no <7> [291.865852] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [291.866069] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no <7> [291.866296] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [291.866523] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7> [291.866751] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [291.866984] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7> [291.867385] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no <7> [291.867820] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7> [291.868230] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7> [291.868826] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [291.868841] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor <7> [291.868862] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0 <7> [291.868676] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7> [291.868931] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no <7> [291.869094] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7> [291.869386] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [291.869589] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7> [291.870020] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [291.870022] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7> [291.870472] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7> [291.870918] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes <7> [291.871325] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7> [291.871752] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7> [291.872121] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7> [291.872509] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7> [291.872966] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no <7> [291.873370] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz <7> [291.873921] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes: <7> [291.873943] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [291.873954] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [291.873967] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] <7> [291.874056] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [291.878290] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7> [291.878655] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected <7> [291.878675] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] <7> [291.878686] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [291.878832] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [291.879251] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [291.880479] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [291.881081] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [291.881602] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [291.882296] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9 <7> [291.882654] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9 <7> [291.882979] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9 <7> [291.883045] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [291.883297] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0 <7> [291.883477] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [291.883659] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0 <7> [291.883983] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2 <7> [291.884082] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [291.884311] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21 <7> [291.884568] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [291.884579] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [291.884664] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000 <7> [291.884992] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE <7> [291.884980] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [291.885319] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7> [291.885670] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7> [291.885998] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39 <7> [291.886325] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7> [291.886678] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7> [291.887006] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7> [291.887327] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7> [291.887679] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7> [291.888002] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7> [291.888320] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7> [291.888670] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7> [291.888990] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7> [291.889314] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no <7> [291.889669] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no <7> [291.889989] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7> [291.890293] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7> [291.890641] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7> [291.890959] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no <7> [291.891276] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no <7> [291.891616] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7> [291.891935] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7> [291.892254] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes <7> [291.892594] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7> [291.892911] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no <7> [291.893231] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7> [291.893578] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7> [291.893905] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no <7> [291.894227] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no <7> [291.894555] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no <7> [291.894880] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7> [291.895116] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [291.895129] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [291.895203] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no <7> [291.895591] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected <7> [291.895608] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] <7> [291.895528] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7> [291.895620] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [291.895858] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7> [291.896178] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7> [291.896507] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7> [291.896835] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no <7> [291.897151] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes <7> [291.897465] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7> [291.897798] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7> [291.898059] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7> [291.898313] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7> [291.898650] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7> [291.898965] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403 <7> [291.899283] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001 <7> [291.899620] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3 <7> [291.899941] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007 <7> [291.900164] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected <7> [291.900183] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] <7> [291.900195] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [291.900261] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000 <7> [291.900608] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000 <7> [291.900929] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24 <7> [291.901245] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8 <7> [291.901575] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7> [291.901885] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7> [291.901869] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [291.902202] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes <7> [291.902288] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <6> [291.902515] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [291.902518] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [291.902522] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [291.902948] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [291.903401] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [291.903412] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [291.904557] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [291.909133] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [291.909149] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [291.911363] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected <7> [291.911380] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] enabled? yes <7> [291.911390] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:114:DP-1] enabled? no <7> [291.911399] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:123:HDMI-A-1] enabled? no <7> [291.911407] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:129:DP-2] enabled? no <7> [291.911414] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:135:HDMI-A-2] enabled? no <7> [291.912633] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [291.912680] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] found preferred mode: 3200x1800 <7> [291.912690] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [291.912759] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:56:pipe A] desired mode 3200x1800 set (0,0) <7> [291.915680] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:106:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [291.916084] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:105:DDI A/PHY A][CRTC:56:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 max link_bpp 24.0000 <7> [291.916431] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000 <7> [291.916894] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [291.917273] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:105:DDI A/PHY A] [CRTC:56:pipe A] <7> [291.917654] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [291.918000] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [291.918358] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [291.918723] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [291.919080] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [291.919444] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [291.919822] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [291.920186] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [291.920553] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [291.920925] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [291.921302] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [291.921717] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [291.922180] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [291.922567] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [291.922930] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [291.923295] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [291.923663] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [291.924022] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [291.924382] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [291.924750] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [291.925106] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [291.925452] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [291.925823] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [291.926184] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [291.926555] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [291.926910] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [291.927283] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [291.927673] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [291.928026] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [291.928388] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [291.928756] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [291.929118] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [291.929479] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [291.929850] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [291.930213] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [291.930586] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dpll_hw_state <7> [291.930946] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [291.931307] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 <7> [291.931658] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [291.932007] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [291.932365] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [291.932729] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [291.933087] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [291.933449] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [291.933820] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset <7> [291.934457] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [291.934828] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [291.935176] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [291.935519] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [291.935888] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [291.936238] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [291.936605] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [291.937078] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [291.937873] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [291.938220] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [291.938595] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [291.938943] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [291.939299] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:56:pipe A] allocated DPLL 0 <6> [291.939719] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7> [291.939683] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:56:pipe A] reserving DPLL 0 <7> [291.940039] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: yes [modeset] <7> [291.940391] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [291.940770] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [291.941123] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [291.941477] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [291.941855] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [291.942205] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [291.942580] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [291.942923] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [291.943276] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [291.943673] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [291.944027] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [291.944386] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [291.944759] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [291.945111] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [291.945467] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [291.945844] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [291.946195] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [291.946574] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [291.946925] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [291.947280] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [291.947658] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [291.948013] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [291.948372] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [291.948747] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [291.949098] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [291.949446] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [291.949810] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [291.950153] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [291.950503] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [291.950892] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [291.951242] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [291.951621] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [291.951973] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [291.952316] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [291.952680] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [291.953022] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [291.953365] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [291.953750] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [291.954117] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [291.954471] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [291.954852] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [291.955187] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [291.955530] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:107] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [291.955901] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [291.956244] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [291.956611] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [291.956946] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [291.958558] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [291.959621] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A] <7> [291.959985] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B] <7> [291.960344] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A] <7> [291.960719] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B] <7> [291.961075] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C] <7> [291.961430] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C] <7> [291.961812] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A] <7> [291.962161] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B] <7> [291.962508] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C] <7> [291.963482] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:56:pipe A] <7> [291.963888] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [291.964607] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power on <7> [291.965087] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [291.965472] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [291.975588] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [291.975982] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power on <7> [291.976368] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000000b <7> [292.189238] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [292.189577] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [292.190213] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [292.191885] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [292.192567] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [292.193823] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [292.194182] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [292.194512] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [292.196009] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Clock recovery OK <7> [292.196355] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [292.196699] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [292.198300] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [292.198663] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [292.199003] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [292.202479] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [292.202808] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [292.203024] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [292.206495] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [292.206815] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [292.207393] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [292.208167] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [292.208514] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [292.209106] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 37 <7> [292.225143] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [292.227264] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1] <7> [292.227672] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A] <7> [292.228495] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <6> [292.230367] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7> [292.230664] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [292.230738] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [292.230748] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [292.230875] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] <7> [292.230888] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1] <7> [292.231224] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [292.232610] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [292.232744] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [292.233131] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [292.233475] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [292.234149] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [292.234164] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor <7> [292.234173] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0 <7> [292.234212] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no <7> [292.234519] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [292.234824] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [292.237248] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes: <7> [292.237261] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [292.237272] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [292.237284] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] <7> [292.237221] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [292.237295] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [292.242136] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected <7> [292.242156] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] <7> [292.242168] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [292.243076] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.243453] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [292.244409] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.244876] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.244889] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.245180] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [292.248768] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.248781] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [292.249133] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected <7> [292.249146] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] <7> [292.249164] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [292.253579] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected <7> [292.253600] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] <7> [292.253612] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [292.254243] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.254606] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [292.255124] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.255492] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.255503] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.255852] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [292.259238] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.259252] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [292.259684] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected <7> [292.259698] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] enabled? yes <7> [292.259708] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:114:DP-1] enabled? no <7> [292.259715] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:123:HDMI-A-1] enabled? no <7> [292.259722] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:129:DP-2] enabled? no <7> [292.259729] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:135:HDMI-A-2] enabled? no <7> [292.259777] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [292.259806] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] found preferred mode: 3200x1800 <7> [292.259814] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [292.259860] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:56:pipe A] desired mode 3200x1800 set (0,0) <7> [292.259882] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] <7> [292.259892] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1] <7> [292.260463] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [292.260836] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [292.261167] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [292.261779] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [292.261816] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [292.261828] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor <7> [292.261837] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0 <7> [292.261873] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no <7> [292.262252] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [292.262603] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [292.264565] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes: <7> [292.264578] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [292.264590] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [292.264703] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] <7> [292.264713] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [292.269630] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected <7> [292.269760] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] <7> [292.269774] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [292.270641] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.270768] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [292.271042] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [292.271175] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [292.271566] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [292.271669] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.272115] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.271956] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [292.272125] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.272321] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [292.272498] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [292.272707] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [292.273070] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [292.273450] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [292.273889] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [292.276633] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.276646] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [292.277043] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected <7> [292.277171] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] <7> [292.277182] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [292.281962] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected <7> [292.282096] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] <7> [292.282107] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [292.282979] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.283327] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [292.284042] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.284419] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.284430] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.284991] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [292.288361] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.288373] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [292.288816] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected <7> [292.296027] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] <7> [292.296043] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <6> [292.297113] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input40 <7> [292.302079] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected <7> [292.303105] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] <7> [292.303127] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [292.303905] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.304257] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <6> [292.307570] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input41 <7> [292.308910] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.309339] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.309351] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.311602] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [292.314975] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.314987] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [292.316227] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected <7> [292.317240] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] <7> [292.317253] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [292.322001] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected <7> [292.322784] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] <7> [292.322797] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [292.323455] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.323827] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <6> [292.325384] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input42 <7> [292.326591] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.327016] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.327028] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.327374] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [292.334747] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.334763] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [292.335215] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected <7> [292.336521] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] <7> [292.336696] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1] <7> [292.337161] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [292.337522] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [292.337932] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [292.338677] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [292.338691] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor <7> [292.338700] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0 <7> [292.338736] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no <7> [292.339142] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [292.339521] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [292.342445] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes: <7> [292.342458] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [292.342470] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [292.342523] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] <7> [292.342551] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [292.347632] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected <7> [292.347691] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] <7> [292.347701] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [292.348379] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.348807] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [292.351666] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.352103] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.352114] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.352485] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [292.362202] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.362216] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [292.362696] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected <7> [292.363334] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] <7> [292.363347] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [292.369889] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected <7> [292.369941] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] <7> [292.369952] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [292.376346] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.376898] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [292.377451] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.377859] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.377870] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.378215] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [292.381447] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.381456] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [292.381860] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected <7> [292.382602] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:139] <7> [293.421277] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:56:pipe A] <7> [293.421929] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [293.422433] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [293.422704] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [293.423089] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [293.423476] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [293.423896] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [293.424289] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [293.424700] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [293.425087] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [293.425473] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [293.425898] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [293.426293] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [293.426694] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [293.427085] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [293.427478] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [293.427885] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [293.428275] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [293.428680] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [293.429067] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [293.429462] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [293.429880] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [293.430272] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [293.430681] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [293.431076] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [293.431472] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [293.431885] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [293.432278] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [293.432671] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [293.433060] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [293.433447] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [293.433849] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [293.434224] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [293.434620] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [293.434916] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [293.435152] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [293.435387] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [293.435643] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [293.435927] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [293.436161] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [293.436395] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset <7> [293.436653] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:56:pipe A] releasing DPLL 0 <7> [293.437064] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [293.437468] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [293.437852] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [293.438206] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [293.438571] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [293.438919] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [293.439162] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [293.439463] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [293.439770] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz <7> [293.440175] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [293.440562] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [293.440919] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [293.441279] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [modeset] <7> [293.441655] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [293.441978] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [293.442316] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [293.442785] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [293.444585] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [293.601039] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [293.649923] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 0 <7> [293.651664] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [293.660830] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power off <7> [293.661352] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [293.661923] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power off time <7> [293.662687] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - short <7> [293.663348] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [293.714978] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [293.715976] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long <7> [293.716872] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [293.717449] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [293.719644] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [293.723012] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:105:DDI A/PHY A] <7> [293.723247] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:56:pipe A] <7> [293.724309] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A] <7> [293.725109] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [293.726744] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [293.730149] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A] <7> [293.731768] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B] <7> [293.733108] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A] <7> [293.734559] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B] <7> [293.736110] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C] <7> [293.737435] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C] <7> [293.738920] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A] <7> [293.740280] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B] <7> [293.741738] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C] <7> [293.743136] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1] <7> [293.745817] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A] <7> [293.749209] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:80:pipe B] <7> [293.750619] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:104:pipe C] <7> [293.850166] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [293.851747] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [293.853257] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [293.855261] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [293.859255] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [293.876759] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [293.965696] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:106:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [293.966713] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:105:DDI A/PHY A][CRTC:56:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 max link_bpp 24.0000 <7> [293.967513] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000 <7> [293.968417] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [293.969663] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:105:DDI A/PHY A] [CRTC:56:pipe A] <7> [293.970676] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [293.971505] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [293.973107] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [293.974070] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [293.975289] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [293.976585] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [293.978093] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [293.979633] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [293.981031] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [293.982388] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [293.983749] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [293.985079] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [293.986337] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [293.987321] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [293.988497] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [293.989479] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [293.990523] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [293.991445] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [293.992559] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [293.993473] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [293.994524] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [293.995725] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [293.996737] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [293.997740] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [293.998844] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [293.999903] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [294.001041] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [294.001949] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [294.003018] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [294.003898] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [294.005198] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [294.006251] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [294.007319] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [294.008254] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [294.009310] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [294.010210] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [294.011246] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [294.012166] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [294.013246] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [294.014242] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset <7> [294.015510] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [294.016509] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [294.017579] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [294.018385] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [294.019275] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [294.020359] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [294.021252] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [294.022485] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [294.023836] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [294.024936] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [294.025870] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [294.026944] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [294.027821] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:56:pipe A] allocated DPLL 0 <7> [294.028945] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:56:pipe A] reserving DPLL 0 <7> [294.029897] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: yes [modeset] <7> [294.031040] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [294.032144] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [294.033191] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [294.034106] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [294.035099] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [294.036054] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [294.037106] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [294.038006] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [294.039068] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [294.039980] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [294.041035] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [294.041932] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [294.043132] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [294.044089] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [294.045181] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [294.046053] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [294.047114] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [294.048001] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [294.049033] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [294.049951] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [294.051025] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [294.051900] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [294.052988] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [294.053894] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [294.054978] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [294.055881] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [294.056923] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [294.057816] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [294.058899] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [294.059850] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [294.060900] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [294.061775] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [294.062876] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [294.063802] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [294.064875] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [294.065789] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [294.066869] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [294.067747] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [294.068789] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [294.069936] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [294.071102] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [294.072007] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [294.073050] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:107] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [294.073935] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [294.075015] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [294.075951] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [294.077026] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [294.089705] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [294.102200] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [294.102768] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [294.103680] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [294.104704] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [294.105700] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [294.106990] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A] <7> [294.107547] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B] <7> [294.108062] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A] <7> [294.108599] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B] <7> [294.109116] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C] <7> [294.109664] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C] <7> [294.110156] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A] <7> [294.110606] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B] <7> [294.111037] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C] <7> [294.111780] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:56:pipe A] <7> [294.112241] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [294.113008] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power on <7> [294.113610] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (106 ms remaining) <7> [294.226021] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [294.276028] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [294.276891] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power on <7> [294.277684] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003 <7> [294.326970] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [294.328093] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long <7> [294.329118] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [294.331620] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A] <7> [294.480815] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [294.482171] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [294.483494] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [294.486027] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turning VDD on <7> [294.487315] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b <7> [294.493996] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [294.495249] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [294.498959] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [294.500703] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [294.502206] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [294.506009] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Clock recovery OK <7> [294.507413] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [294.508872] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [294.513012] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [294.514577] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [294.516088] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [294.520271] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [294.521656] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [294.524235] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [294.527569] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [294.529048] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [294.531179] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 37 <7> [294.535958] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 384 us, max time under evasion is 250 us <7> [294.543331] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [294.550908] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1] <7> [294.552416] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A] <7> [294.557276] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [294.558674] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [294.563101] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [294.570159] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [294.571594] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [294.573609] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [294.575003] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [294.575038] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [294.576886] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [294.582836] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [294.582872] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [294.590731] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [294.596471] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [294.598014] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [294.599298] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [294.601164] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [294.602698] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [294.602733] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [294.603989] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [294.609561] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [294.609586] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [294.700189] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [294.701041] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [294.713720] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [294.739118] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [294.739493] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [294.751694] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [294.794409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [294.795638] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [294.803570] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [294.803895] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [294.804157] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [294.804414] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [294.805013] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [294.805314] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [294.805691] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [294.806026] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [294.806291] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [294.807142] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [294.886610] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [294.887477] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [294.887875] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [294.888444] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <6> [294.892042] Console: switching to colour dummy device 80x25 <7> [294.898767] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:107] is removed <7> [294.898895] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [294.899454] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [294.900289] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [294.901107] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [294.901911] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [294.903120] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [294.910198] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [294.911186] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [294.912076] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [294.912911] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [294.913712] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [294.914479] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [294.915156] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [294.915999] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [294.916818] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [294.917632] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [294.918420] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [294.919224] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [294.920040] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [294.920597] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [294.921200] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [294.922011] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [294.922844] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [294.923661] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [294.924444] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [294.925249] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [294.925999] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [294.926636] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [294.927416] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [294.928261] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [294.929067] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [294.929876] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [294.930671] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [294.931324] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [294.931877] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [294.932431] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [294.933223] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [294.934039] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [294.934850] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [294.935677] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [294.936456] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [294.937054] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [294.937697] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [294.938404] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [294.939231] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [294.940040] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [294.940854] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset <7> [294.941488] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:56:pipe A] releasing DPLL 0 <7> [294.942399] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [294.943684] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [294.944737] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [294.945588] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [294.946381] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [294.947211] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [294.948097] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [modeset] <7> [294.948939] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [294.949795] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [294.950619] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [294.952414] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [295.161863] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 0 <7> [295.164177] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [295.180776] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power off <7> [295.181895] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [295.182998] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - short <7> [295.184290] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power off time <7> [295.186057] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [295.236987] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [295.238273] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long <7> [295.239406] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [295.240966] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [295.243826] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:56:pipe A] <7> [295.243897] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:105:DDI A/PHY A] <7> [295.245749] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A] <7> [295.246150] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [295.248014] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [295.251683] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A] <7> [295.253138] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B] <7> [295.254459] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A] <7> [295.255892] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B] <7> [295.257056] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C] <7> [295.258447] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C] <7> [295.259719] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A] <7> [295.261097] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B] <7> [295.262286] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C] <7> [295.263742] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1] <7> [295.266909] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A] <7> [295.337908] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [295.372019] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:106:eDP-1] removing connector from sysfs <7> [295.387406] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:114:DP-1] removing connector from sysfs <7> [295.391327] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:123:HDMI-A-1] removing connector from sysfs <7> [295.401510] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:129:DP-2] removing connector from sysfs <7> [295.405328] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:135:HDMI-A-2] removing connector from sysfs <7> [295.427456] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (315 ms remaining) <7> [295.746183] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [295.777736] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [296.465412] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS <6> [296.466467] [IGT] i915_pm_rpm: exiting, ret=0

<6> [281.419363] Console: switching to colour dummy device 80x25

<7> [281.424929] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [281.425659] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1]

<7> [281.425673] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1]

<7> [281.426294] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [281.426547] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [281.426928] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [281.427340] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [281.427353] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor

<7> [281.427362] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0

<7> [281.427413] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no

<7> [281.427771] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [281.428125] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [281.430029] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes:

<7> [281.430038] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [281.430046] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [281.430147] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1]

<7> [281.430154] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [281.434488] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected

<7> [281.434648] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]

<7> [281.434659] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [281.435476] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [281.435764] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [281.436222] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [281.436506] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [281.436513] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [281.436853] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [281.439982] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [281.439992] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [281.440292] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected

<7> [281.440386] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2]

<7> [281.440393] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [281.444766] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected

<7> [281.444885] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]

<7> [281.444896] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [281.445523] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [281.445912] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [281.446440] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [281.446842] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [281.446851] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [281.447194] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [281.450377] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [281.450387] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [281.450805] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected

<7> [281.459857] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1]

<7> [281.459868] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [281.464226] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected

<7> [281.464967] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]

<7> [281.464976] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [281.465481] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [281.465766] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [281.466214] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [281.466493] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [281.466502] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [281.466806] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [281.469854] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [281.469864] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [281.470167] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected

<7> [281.470879] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2]

<7> [281.470895] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [281.475215] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected

<7> [281.475917] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]

<7> [281.475926] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [281.476415] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [281.476687] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [281.477139] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [281.477389] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [281.477397] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [281.477721] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [281.480784] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [281.480792] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [281.481064] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected

<7> [281.481567] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1]

<7> [281.481575] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1]

<7> [281.481905] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [281.482181] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [281.482397] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [281.482692] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [281.482705] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor

<7> [281.482713] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0

<7> [281.482748] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no

<7> [281.482992] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [281.483275] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [281.484783] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes:

<7> [281.484793] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [281.484800] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [281.484834] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1]

<7> [281.484841] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [281.489175] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected

<7> [281.489226] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]

<7> [281.489233] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [281.489703] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [281.490045] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [281.490551] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [281.490918] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [281.490927] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [281.491251] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [281.494352] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [281.494362] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [281.494683] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected

<7> [281.494740] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2]

<7> [281.494751] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [281.499081] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected

<7> [281.499112] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]

<7> [281.499119] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [281.499619] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [281.499863] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [281.500257] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [281.500513] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [281.500520] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [281.500771] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [281.503820] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [281.503828] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [281.504092] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected

<7> [281.504636] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:140]

<7> [281.579987] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [282.548736] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:56:pipe A]

<7> [282.549121] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [282.549428] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [282.549731] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [282.550051] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [282.550314] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [282.550605] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [282.550910] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [282.551177] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [282.551429] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [282.551703] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [282.552013] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [282.552266] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [282.552517] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [282.552818] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [282.553112] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [282.553366] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [282.553636] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [282.553927] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [282.554184] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [282.554424] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [282.554683] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [282.554970] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [282.555212] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [282.555453] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [282.555719] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [282.556000] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [282.556242] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [282.556514] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [282.556789] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [282.557059] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [282.557303] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [282.557646] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [282.557958] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [282.558202] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [282.558454] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [282.558793] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [282.559056] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [282.559300] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [282.559593] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [282.559972] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset

<7> [282.560363] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:56:pipe A] releasing DPLL 0

<7> [282.560813] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [282.561212] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [282.561598] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [282.561970] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [282.562319] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [282.562670] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [282.562939] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [282.563239] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [282.563509] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz

<7> [282.563823] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [282.564186] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [282.564564] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [282.564960] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [modeset]

<7> [282.565336] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [282.565723] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [282.565971] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [282.566383] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [282.568202] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [282.778063] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 0

<7> [282.780044] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [282.793220] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power off

<7> [282.793749] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [282.794321] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [282.795079] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - short

<7> [282.795761] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [282.846974] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [282.847495] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [282.848354] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long

<7> [282.849680] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [282.849797] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [282.852366] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:105:DDI A/PHY A]

<7> [282.852768] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:56:pipe A]

<7> [282.853682] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A]

<7> [282.854675] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [282.856112] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [282.859195] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A]

<7> [282.860735] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B]

<7> [282.862076] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A]

<7> [282.863419] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B]

<7> [282.864723] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C]

<7> [282.866136] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C]

<7> [282.867455] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A]

<7> [282.868814] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B]

<7> [282.869873] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C]

<7> [282.871081] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1]

<7> [282.873744] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A]

<7> [282.876217] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:80:pipe B]

<7> [282.877420] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:104:pipe C]

<7> [282.978108] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [282.980193] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [282.981887] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [282.983988] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [282.988738] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [283.006802] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [283.089460] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:106:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [283.090695] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:105:DDI A/PHY A][CRTC:56:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 max link_bpp 24.0000

<7> [283.092125] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000

<7> [283.093249] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [283.094440] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:105:DDI A/PHY A] [CRTC:56:pipe A]

<7> [283.095425] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [283.096854] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [283.098053] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [283.100704] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [283.102046] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [283.103459] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [283.104655] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [283.106161] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [283.107191] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [283.108400] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [283.109477] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [283.110853] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [283.111872] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [283.113129] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [283.114170] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [283.115370] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [283.116441] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [283.117681] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [283.118690] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [283.119924] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [283.121019] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [283.122383] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [283.123762] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [283.125302] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [283.126834] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [283.128360] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [283.129881] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [283.131231] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [283.132276] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [283.133694] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [283.135250] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [283.136789] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [283.138308] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [283.139837] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [283.141129] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [283.142466] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [283.143514] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [283.144735] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [283.145781] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [283.147087] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset

<7> [283.148336] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [283.149507] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [283.150523] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [283.151902] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [283.153319] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [283.154803] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [283.156308] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [283.158133] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [283.159766] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [283.160975] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [283.161885] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [283.163176] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [283.164538] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:56:pipe A] allocated DPLL 0

<7> [283.165875] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:56:pipe A] reserving DPLL 0

<7> [283.167231] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: yes [modeset]

<7> [283.168544] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [283.169507] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [283.170525] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [283.171410] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [283.172487] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [283.173376] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [283.174449] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [283.175386] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [283.176461] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [283.177333] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [283.178538] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [283.179611] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [283.180517] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [283.181786] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [283.183109] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [283.184443] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [283.185770] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [283.187066] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [283.187909] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [283.188534] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [283.189141] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [283.189863] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [283.190410] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [283.191021] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [283.191736] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [283.192312] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [283.192904] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [283.193744] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [283.194358] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [283.194971] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [283.195563] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [283.196148] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [283.196599] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [283.197096] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [283.197504] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [283.197972] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [283.198492] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [283.199150] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [283.199695] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [283.200124] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [283.200532] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [283.200973] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [283.201478] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:107] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [283.201945] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [283.202438] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [283.202899] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [283.203516] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [283.215688] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [283.224349] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [283.224760] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [283.225395] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [283.226182] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [283.226953] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [283.227892] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A]

<7> [283.228282] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B]

<7> [283.228683] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A]

<7> [283.229053] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B]

<7> [283.229419] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C]

<7> [283.229826] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C]

<7> [283.230193] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A]

<7> [283.230561] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B]

<7> [283.230947] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C]

<7> [283.231596] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:56:pipe A]

<7> [283.232003] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [283.232598] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power on

<7> [283.233070] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (117 ms remaining)

<7> [283.354046] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [283.424423] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [283.425691] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power on

<7> [283.427208] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003

<7> [283.475978] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [283.477095] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long

<7> [283.478116] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [283.479226] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A]

<7> [283.633997] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [283.635513] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [283.637056] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [283.640446] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turning VDD on

<7> [283.642343] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b

<7> [283.650301] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [283.651567] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [283.655352] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [283.656961] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [283.658505] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [283.662326] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Clock recovery OK

<7> [283.664076] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [283.665556] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [283.669970] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [283.671653] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [283.673187] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [283.677308] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [283.678828] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [283.681473] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [283.684932] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [283.686415] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [283.688490] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 37

<7> [283.700712] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [283.708449] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1]

<7> [283.710292] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A]

<7> [283.715473] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [283.716108] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [283.721173] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<6> [283.723292] [IGT] i915_pm_rpm: starting subtest module-reload

<7> [283.723377] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [283.724716] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [283.726182] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [283.727500] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [283.727534] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [283.728813] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [283.734797] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [283.734834] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [283.736646] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [283.742748] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [283.744529] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [283.745881] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [283.747986] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [283.749427] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [283.749462] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [283.751298] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [283.757358] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [283.757396] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [283.869131] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [283.869974] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [283.882769] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [283.908171] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [283.908553] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [283.921757] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [283.968651] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [283.972849] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [283.982654] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [283.983261] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [283.986456] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [283.987037] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [283.991421] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [283.992009] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [283.992540] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [283.993341] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [283.994671] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [284.005813] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [284.105861] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [284.106835] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [284.107267] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [284.107678] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [284.118955] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:107] is removed

<7> [284.119136] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [284.120848] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [284.121865] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [284.122818] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [284.123784] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [284.126039] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [284.134330] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [284.137927] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [284.138725] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [284.139480] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [284.140189] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [284.141340] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [284.142265] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [284.143252] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [284.144160] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [284.145098] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [284.146011] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [284.146908] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [284.147811] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [284.148786] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [284.149692] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [284.150560] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [284.151476] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [284.152396] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [284.153295] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [284.154192] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [284.155121] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [284.156014] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [284.156916] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [284.157807] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [284.158708] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [284.159599] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [284.160460] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [284.161368] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [284.162268] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [284.163175] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [284.164068] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [284.164975] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [284.165869] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [284.166775] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [284.167680] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [284.168515] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [284.169415] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [284.170315] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [284.171217] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [284.172116] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [284.173046] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset

<7> [284.173954] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:56:pipe A] releasing DPLL 0

<7> [284.174975] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [284.175993] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [284.177088] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [284.178001] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [284.178889] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [284.179779] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [284.180692] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [modeset]

<7> [284.181556] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [284.182465] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [284.183360] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [284.185344] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [284.394052] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 0

<7> [284.396425] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [284.404259] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power off

<7> [284.404740] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [284.405389] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [284.406061] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - short

<7> [284.406439] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [284.457986] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [284.459267] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long

<7> [284.459676] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [284.460455] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [284.461678] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:105:DDI A/PHY A]

<7> [284.462356] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:56:pipe A]

<7> [284.463332] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A]

<7> [284.464748] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [284.466516] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [284.470505] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A]

<7> [284.472558] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B]

<7> [284.474414] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A]

<7> [284.476066] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B]

<7> [284.477757] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C]

<7> [284.479540] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C]

<7> [284.481129] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A]

<7> [284.482809] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B]

<7> [284.484382] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C]

<7> [284.485903] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1]

<7> [284.488990] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A]

<7> [284.566338] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [284.609781] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:106:eDP-1] removing connector from sysfs

<7> [284.622858] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:114:DP-1] removing connector from sysfs

<7> [284.628293] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:123:HDMI-A-1] removing connector from sysfs

<7> [284.640918] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:129:DP-2] removing connector from sysfs

<7> [284.644479] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:135:HDMI-A-2] removing connector from sysfs

<7> [284.665201] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (296 ms remaining)

<7> [284.970323] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [285.032676] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<6> [285.736383] [IGT] Reloading i915 w/o display

<5> [286.511952] Setting dangerous option force_probe - tainting kernel

<6> [286.523852] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0

<7> [286.525645] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K

<7> [286.526156] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [286.526420] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH

<7> [286.526702] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [286.527121] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [286.527730] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [286.528082] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [286.529254] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [286.529488] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [286.529712] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [286.529961] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [286.529971] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [286.530666] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [286.530721] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [286.530994] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [286.531227] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7717 MiB [mem 0x00000000-0x1e252ffff], io: n/a

<7> [286.531417] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a

<7> [286.532275] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018

<7> [286.532688] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [286.532954] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [286.533218] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [286.533466] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [286.541614] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [286.541896] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [286.542168] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [286.542424] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [286.542736] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [286.543090] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [286.543412] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no

<7> [286.543762] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [286.544085] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [286.544407] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no

<7> [286.544741] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes

<7> [286.545066] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no

<7> [286.545393] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3

<7> [286.545734] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [286.546058] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0

<7> [286.546382] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0

<7> [286.547461] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [286.547911] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203

<7> [286.548325] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [286.548749] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [286.549160] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [286.549584] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [286.549998] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 848)

<7> [286.550408] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [286.550830] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [286.551246] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [286.551682] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [286.552096] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136)

<7> [286.552495] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [286.552907] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [286.553305] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [286.553730] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [286.554142] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [286.554552] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [286.554956] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [286.555357] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [286.555767] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [286.556169] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [286.556575] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [286.556936] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [286.557346] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [286.557786] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [286.558303] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [286.558748] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [286.559160] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [286.559574] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [286.559973] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [286.560374] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [286.560908] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [286.561310] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [286.561732] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [286.562153] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [286.562674] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [286.563084] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [286.563489] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [286.563912] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [286.565181] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<7> [286.566375] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [286.567882] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [286.568354] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [286.568811] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [286.569234] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [286.570536] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [286.571110] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [286.571537] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided

<7> [286.571966] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec)

<7> [286.572395] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec)

<7> [286.572811] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec)

<7> [286.573214] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec)

<7> [286.573632] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec)

<7> [286.574037] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec)

<7> [286.574440] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec)

<7> [286.574852] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec)

<7> [286.575253] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec)

<7> [286.575664] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec)

<7> [286.576084] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec)

<7> [286.576500] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec)

<7> [286.576928] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec)

<7> [286.577352] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec)

<7> [286.577718] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec)

<6> [286.578537] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [286.583268] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [286.592791] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [286.593156] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:105:DDI A/PHY A] Using AUX CH A (VBT)

<7> [286.593487] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:105:DDI A/PHY A]

<7> [286.601667] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [286.601989] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [286.602256] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [286.602518] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [286.603036] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [286.603474] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [286.603927] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP

<7> [286.604350] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [286.604770] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0

<7> [286.605183] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0

<7> [286.605776] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:105:DDI A/PHY A] initial power sequencer: PPS 0

<7> [286.606244] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [286.606723] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [286.607125] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [286.607526] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [286.607947] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [286.608409] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [286.609096] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turning VDD on

<7> [286.609521] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [286.609965] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [286.619756] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [286.620090] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [286.620347] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [286.828182] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [286.829101] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [286.831004] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00

<7> [286.836094] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [286.855724] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [286.855773] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor

<7> [286.855805] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0

<7> [286.856190] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:106:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [286.857634] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:106:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [286.859616] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:106:eDP-1] DRRS type: static

<7> [286.862062] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:106:eDP-1] Using native PCH PWM for backlight control

<7> [286.864114] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:106:eDP-1] backlight initialized, disabled, brightness 0/937

<7> [286.867061] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [286.869010] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [286.870576] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [286.871717] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [286.872862] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [286.874056] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [286.876408] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:113:DDI B/PHY B] Using AUX CH B (VBT)

<7> [286.877547] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:113:DDI B/PHY B]

<7> [286.880204] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [286.881152] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:113:DDI B/PHY B]

<7> [286.882001] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:113:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [286.883935] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:128:DDI C/PHY C] Using AUX CH C (VBT)

<7> [286.884717] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:128:DDI C/PHY C]

<7> [286.886394] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [286.887132] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:128:DDI C/PHY C]

<7> [286.887779] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:128:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [286.889744] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:56:pipe A] hw state readout: disabled

<7> [286.890737] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe B] hw state readout: disabled

<7> [286.891728] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:104:pipe C] hw state readout: disabled

<7> [286.892390] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A

<7> [286.893014] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] hw state readout: disabled, pipe A

<7> [286.893623] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] hw state readout: disabled, pipe A

<7> [286.894165] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:57:plane 1B] hw state readout: disabled, pipe B

<7> [286.894790] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:66:plane 2B] hw state readout: disabled, pipe B

<7> [286.895390] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:75:cursor B] hw state readout: disabled, pipe B

<7> [286.896013] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 1C] hw state readout: disabled, pipe C

<7> [286.896667] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:90:plane 2C] hw state readout: disabled, pipe C

<7> [286.897261] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:99:cursor C] hw state readout: disabled, pipe C

<7> [286.897907] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:105:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [286.898506] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:113:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [286.899080] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:115:DP-MST A] hw state readout: disabled, pipe A

<7> [286.899637] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:116:DP-MST B] hw state readout: disabled, pipe B

<7> [286.900166] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DP-MST C] hw state readout: disabled, pipe C

<7> [286.901235] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:128:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [286.901723] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:130:DP-MST A] hw state readout: disabled, pipe A

<7> [286.902183] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:131:DP-MST B] hw state readout: disabled, pipe B

<7> [286.902664] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:132:DP-MST C] hw state readout: disabled, pipe C

<7> [286.903184] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [286.903805] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [286.904318] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [286.904841] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [286.905480] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:106:eDP-1] hw state readout: disabled

<7> [286.906057] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:114:DP-1] hw state readout: disabled

<7> [286.906627] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:123:HDMI-A-1] hw state readout: disabled

<7> [286.907184] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:129:DP-2] hw state readout: disabled

<7> [286.907755] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:135:HDMI-A-2] hw state readout: disabled

<7> [286.908210] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz

<7> [286.908631] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] min_cdclk 0 kHz

<7> [286.909040] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] min_cdclk 0 kHz

<7> [286.909451] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:56:pipe A] min_cdclk 0 kHz

<7> [286.909880] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:57:plane 1B] min_cdclk 0 kHz

<7> [286.910292] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:66:plane 2B] min_cdclk 0 kHz

<7> [286.910714] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:75:cursor B] min_cdclk 0 kHz

<7> [286.911150] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe B] min_cdclk 0 kHz

<7> [286.911588] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 1C] min_cdclk 0 kHz

<7> [286.912014] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:90:plane 2C] min_cdclk 0 kHz

<7> [286.912440] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:99:cursor C] min_cdclk 0 kHz

<7> [286.912877] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:104:pipe C] min_cdclk 0 kHz

<7> [286.913313] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:56:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [286.913732] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:80:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [286.914139] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:104:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [286.914748] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [setup_hw_state]

<7> [286.915167] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe B] enable: no [setup_hw_state]

<7> [286.915596] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:104:pipe C] enable: no [setup_hw_state]

<7> [286.916027] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [286.916509] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [286.916876] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [286.917238] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [286.917660] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global

<7> [286.920609] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [286.921052] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [286.921465] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0

<7> [286.946398] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [286.946692] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [286.946895] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [286.947111] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [286.947319] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 0: start 0x8

<7> [286.947607] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 1: start 0x108

<7> [286.948017] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 2: start 0x208

<7> [286.948429] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 3: start 0x308

<7> [286.948866] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 4: start 0x3c8

<7> [286.949281] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 0: start 0x8

<7> [286.949707] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 1: start 0x108

<7> [286.950124] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 2: start 0x208

<7> [286.950544] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 3: start 0x308

<7> [286.951075] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 4: start 0x3c8

<7> [286.951491] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 0: start 0x8

<7> [286.951916] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 1: start 0x108

<7> [286.952331] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 2: start 0x208

<7> [286.952769] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 3: start 0x308

<7> [286.953185] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 4: start 0x3c8

<7> [286.953926] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [fastset]

<7> [286.954347] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe B] enable: no [fastset]

<7> [286.954774] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:104:pipe C] enable: no [fastset]

<7> [286.955485] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A]

<7> [286.956431] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe B]

<7> [286.957123] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:104:pipe C]

<7> [286.957802] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [286.964460] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:106:eDP-1] adding connector to sysfs

<7> [286.965863] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:106:eDP-1] backlight device intel_backlight registered

<7> [286.966232] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:106:eDP-1] Registered panel device 'card1-eDP-1', has fwnode: yes

<7> [286.967249] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card1-eDP-1

<7> [286.969768] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:106:eDP-1] generating connector hotplug event

<7> [286.969911] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:114:DP-1] adding connector to sysfs

<7> [286.971457] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card1-DP-1

<7> [286.973712] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:114:DP-1] generating connector hotplug event

<7> [286.973862] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:123:HDMI-A-1] adding connector to sysfs

<7> [286.977679] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:123:HDMI-A-1] generating connector hotplug event

<7> [286.977831] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:129:DP-2] adding connector to sysfs

<7> [286.981985] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card1-DP-2

<7> [286.985951] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:129:DP-2] generating connector hotplug event

<7> [286.986076] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:135:HDMI-A-2] adding connector to sysfs

<7> [286.988971] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:135:HDMI-A-2] generating connector hotplug event

<6> [286.989065] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 1

<7> [286.996009] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [287.032172] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [287.042481] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input35

<7> [287.045808] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [287.051091] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [287.051574] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:114:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [287.052000] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [287.052396] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:123:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [287.053366] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [287.053816] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:129:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [287.054233] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [287.054646] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:135:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [287.055057] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [287.055666] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:56:pipe A] not active, skipping

<7> [287.056089] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:80:pipe B] not active, skipping

<7> [287.056479] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:104:pipe C] not active, skipping

<7> [287.056905] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config

<7> [287.059158] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [287.060224] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [287.060380] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1]

<7> [287.060394] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1]

<7> [287.060841] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] status updated from unknown to disconnected

<7> [287.060862] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] disconnected

<7> [287.060885] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [287.061245] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:106:eDP-1] EDID changed, epoch counter 2

<7> [287.061275] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1]

<7> [287.061287] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [287.061725] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected

<7> [287.061948] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]

<7> [287.061961] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [287.062357] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected

<7> [287.062370] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2]

<7> [287.062380] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [287.062811] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected

<7> [287.063018] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]

<7> [287.063032] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [287.063430] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected

<7> [287.063441] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [287.063449] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] enabled? no

<7> [287.063458] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:114:DP-1] enabled? no

<7> [287.063465] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:123:HDMI-A-1] enabled? no

<7> [287.063473] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:129:DP-2] enabled? no

<7> [287.063481] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:135:HDMI-A-2] enabled? no

<7> [287.063537] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [287.063579] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [287.064407] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [287.064426] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [287.067044] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9

<7> [287.067523] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0

<7> [287.067973] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no

<7> [287.068389] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no

<7> [287.068818] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no

<7> [287.069235] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes

<7> [287.069661] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes

<7> [287.070074] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no

<7> [287.070481] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes

<7> [287.070915] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no

<7> [287.071329] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes

<7> [287.071778] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no

<7> [287.072193] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes

<7> [287.072632] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no

<7> [287.073048] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes

<7> [287.073463] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes

<7> [287.073905] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no

<7> [287.074316] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no

<7> [287.074740] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes

<7> [287.075150] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes

<7> [287.075576] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no

<7> [287.075986] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz

<7> [287.076938] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [287.077076] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1]

<7> [287.077091] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1]

<7> [287.077500] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] disconnected

<7> [287.077515] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1]

<7> [287.077525] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [287.077940] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected

<7> [287.077952] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]

<7> [287.077963] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [287.078354] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected

<7> [287.078366] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2]

<7> [287.078376] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [287.078774] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected

<7> [287.078786] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]

<7> [287.078796] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [287.079193] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected

<7> [287.079204] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [287.079213] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] enabled? no

<7> [287.079221] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:114:DP-1] enabled? no

<7> [287.079229] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:123:HDMI-A-1] enabled? no

<7> [287.079236] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:129:DP-2] enabled? no

<7> [287.079244] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:135:HDMI-A-2] enabled? no

<7> [287.079303] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [287.079320] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [287.079369] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [287.079399] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [287.079404] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [287.080499] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device

<7> [287.080937] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [287.081367] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [287.081805] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [287.082227] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [287.082662] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [287.083442] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9

<7> [287.084349] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9

<7> [287.084695] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9

<7> [287.085014] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0

<7> [287.085325] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0

<7> [287.085654] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2

<7> [287.085970] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21

<7> [287.086293] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000

<7> [287.086692] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE

<7> [287.087020] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48

<7> [287.087345] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2

<7> [287.087687] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39

<7> [287.088012] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no

<7> [287.088339] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no

<7> [287.088762] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no

<7> [287.089087] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes

<7> [287.089416] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no

<7> [287.089770] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no

<7> [287.090097] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes

<7> [287.090422] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes

<7> [287.090758] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no

<7> [287.091085] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no

<7> [287.091414] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no

<7> [287.091756] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes

<7> [287.092081] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no

<7> [287.092408] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no

<7> [287.092755] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no

<7> [287.093078] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no

<7> [287.093398] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no

<7> [287.093732] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no

<7> [287.094049] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes

<7> [287.094364] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes

<7> [287.094692] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no

<7> [287.095017] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no

<7> [287.095343] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no

<7> [287.095681] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no

<7> [287.096005] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no

<7> [287.096333] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no

<7> [287.096681] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no

<7> [287.097010] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no

<7> [287.097332] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes

<7> [287.097676] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no

<7> [287.098004] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes

<7> [287.098329] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes

<7> [287.098668] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no

<7> [287.098987] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes

<7> [287.099312] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no

<7> [287.099649] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no

<7> [287.099971] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no

<7> [287.100296] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no

<7> [287.100626] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled

<7> [287.100945] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403

<7> [287.101271] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001

<7> [287.101619] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3

<7> [287.101946] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007

<7> [287.102271] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000

<7> [287.102614] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000

<7> [287.102935] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24

<7> [287.103257] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8

<7> [287.103598] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no

<7> [287.103917] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no

<7> [287.104234] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes

<6> [287.104551] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [287.104574] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [287.104579] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [287.119929] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4

<6> [287.121804] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])

<7> [287.122341] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [287.123157] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [287.126102] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [287.155747] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [287.156030] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [287.156263] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [287.156492] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [287.157200] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [287.157449] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [287.157705] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [287.157934] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [287.158162] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<6> [287.187187] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36

<6> [287.193344] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input37

<6> [287.200096] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input38

<7> [288.335184] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [289.396830] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turning VDD off

<7> [289.397744] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [289.398614] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [289.400005] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [289.401381] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long

<7> [289.402760] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [289.406366] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A]

<7> [289.406220] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [289.407625] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [289.410662] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [289.414602] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [289.433666] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [289.550784] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [289.575749] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [289.582665] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [289.583000] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [289.583257] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [289.583474] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [289.583715] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [289.583959] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [289.584046] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [289.584746] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [289.585383] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [289.586994] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [289.599733] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [289.600070] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [289.600327] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [289.600596] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [289.601289] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [289.708043] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [289.708332] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [289.709302] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [289.709942] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [289.711914] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [289.719035] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [289.719308] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [289.719531] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [289.719847] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [289.720184] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [289.720519] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [289.720863] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [289.721194] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [289.721485] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [289.722266] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [289.723141] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [289.723521] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [289.723908] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [289.724673] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [289.812900] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [289.813588] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [289.814742] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [289.816069] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [289.818041] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [289.819490] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [289.820755] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [289.822253] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [289.823716] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [289.879108] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [289.897791] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:106:eDP-1] removing connector from sysfs

<7> [289.906375] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:114:DP-1] removing connector from sysfs

<7> [289.907952] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:123:HDMI-A-1] removing connector from sysfs

<7> [289.915401] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:129:DP-2] removing connector from sysfs

<7> [289.921148] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:135:HDMI-A-2] removing connector from sysfs

<7> [289.948863] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [289.949279] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [289.959773] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<6> [290.473399] [IGT] Reloading i915 as normal

<5> [291.260080] Setting dangerous option force_probe - tainting kernel

<6> [291.271598] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0

<7> [291.273263] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K

<7> [291.273865] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [291.274174] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH

<7> [291.274428] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [291.274753] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [291.275213] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [291.275439] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [291.276427] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [291.276667] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [291.276883] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [291.277094] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [291.277103] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [291.277758] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [291.277797] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [291.278046] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [291.278277] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7717 MiB [mem 0x00000000-0x1e252ffff], io: n/a

<7> [291.278468] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a

<7> [291.279259] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018

<7> [291.279731] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [291.280109] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [291.280479] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [291.280842] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [291.287556] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [291.287843] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [291.288085] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [291.288326] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [291.288605] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [291.288854] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [291.289040] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no

<7> [291.289225] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [291.289408] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [291.289609] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no

<7> [291.289874] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes

<7> [291.290059] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no

<7> [291.290241] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3

<7> [291.290423] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [291.290665] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0

<7> [291.290938] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0

<7> [291.291716] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [291.291994] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203

<7> [291.292252] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [291.292508] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [291.292891] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [291.293236] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [291.293491] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 848)

<7> [291.293843] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [291.294128] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [291.294400] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [291.294689] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [291.294990] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136)

<7> [291.295236] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [291.295481] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [291.295750] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [291.296055] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [291.296380] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [291.296669] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [291.296974] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [291.297222] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [291.297467] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [291.297729] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [291.298029] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [291.298275] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [291.298528] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [291.298822] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [291.299290] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [291.299596] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [291.299909] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [291.300161] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [291.300405] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [291.300678] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [291.301074] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [291.301326] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [291.301600] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [291.301975] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [291.302302] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [291.302583] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [291.302907] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [291.303166] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [291.304059] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<7> [291.305226] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [291.305510] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [291.305800] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [291.306109] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [291.307626] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [291.308223] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [291.308587] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [291.308846] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided

<7> [291.309098] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec)

<7> [291.309348] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec)

<7> [291.309623] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec)

<7> [291.309874] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec)

<7> [291.310126] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec)

<7> [291.310376] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec)

<7> [291.310735] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec)

<7> [291.311027] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec)

<7> [291.311277] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec)

<7> [291.311527] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec)

<7> [291.311828] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec)

<7> [291.312133] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec)

<7> [291.312385] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec)

<7> [291.312683] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec)

<7> [291.312979] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec)

<6> [291.313341] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [291.317438] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [291.321147] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [291.321626] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:105:DDI A/PHY A] Using AUX CH A (VBT)

<7> [291.322051] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:105:DDI A/PHY A]

<7> [291.330619] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [291.331045] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [291.331431] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [291.331829] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [291.332228] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [291.332619] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [291.333003] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP

<7> [291.333383] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [291.333804] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0

<7> [291.334189] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0

<7> [291.335454] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:105:DDI A/PHY A] initial power sequencer: PPS 0

<7> [291.335912] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [291.336278] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [291.336658] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [291.337018] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [291.337376] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [291.337805] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [291.338459] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turning VDD on

<7> [291.338883] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [291.339296] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [291.349602] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [291.349923] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [291.350171] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [291.556285] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [291.557971] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [291.559427] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00

<7> [291.562788] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [291.578269] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [291.578312] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor

<7> [291.578340] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0

<7> [291.578863] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:106:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [291.580049] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:106:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [291.581379] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:106:eDP-1] DRRS type: static

<7> [291.582910] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:106:eDP-1] Using native PCH PWM for backlight control

<7> [291.584222] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:106:eDP-1] backlight initialized, disabled, brightness 0/937

<7> [291.586202] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [291.587337] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [291.588458] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [291.589782] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [291.590869] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [291.592295] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [291.594838] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:113:DDI B/PHY B] Using AUX CH B (VBT)

<7> [291.596507] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:113:DDI B/PHY B]

<7> [291.602046] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [291.603612] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:113:DDI B/PHY B]

<7> [291.605232] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:113:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [291.608988] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:128:DDI C/PHY C] Using AUX CH C (VBT)

<7> [291.610848] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:128:DDI C/PHY C]

<7> [291.614783] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [291.616663] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:128:DDI C/PHY C]

<7> [291.618307] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:128:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [291.622531] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:56:pipe A] hw state readout: disabled

<7> [291.624415] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe B] hw state readout: disabled

<7> [291.626171] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:104:pipe C] hw state readout: disabled

<7> [291.627364] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A

<7> [291.628590] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] hw state readout: disabled, pipe A

<7> [291.629787] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] hw state readout: disabled, pipe A

<7> [291.631007] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:57:plane 1B] hw state readout: disabled, pipe B

<7> [291.632159] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:66:plane 2B] hw state readout: disabled, pipe B

<7> [291.633029] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:75:cursor B] hw state readout: disabled, pipe B

<7> [291.633986] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 1C] hw state readout: disabled, pipe C

<7> [291.634814] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:90:plane 2C] hw state readout: disabled, pipe C

<7> [291.635453] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:99:cursor C] hw state readout: disabled, pipe C

<7> [291.636077] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:105:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [291.636841] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:113:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [291.637445] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:115:DP-MST A] hw state readout: disabled, pipe A

<7> [291.638068] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:116:DP-MST B] hw state readout: disabled, pipe B

<7> [291.638757] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DP-MST C] hw state readout: disabled, pipe C

<7> [291.639326] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:128:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [291.639867] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:130:DP-MST A] hw state readout: disabled, pipe A

<7> [291.640482] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:131:DP-MST B] hw state readout: disabled, pipe B

<7> [291.641033] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:132:DP-MST C] hw state readout: disabled, pipe C

<7> [291.641847] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [291.642478] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [291.643130] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [291.643809] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [291.644369] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:106:eDP-1] hw state readout: disabled

<7> [291.644923] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:114:DP-1] hw state readout: disabled

<7> [291.645453] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:123:HDMI-A-1] hw state readout: disabled

<7> [291.646173] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:129:DP-2] hw state readout: disabled

<7> [291.646780] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:135:HDMI-A-2] hw state readout: disabled

<7> [291.647188] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz

<7> [291.647622] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] min_cdclk 0 kHz

<7> [291.648117] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] min_cdclk 0 kHz

<7> [291.648522] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:56:pipe A] min_cdclk 0 kHz

<7> [291.648986] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:57:plane 1B] min_cdclk 0 kHz

<7> [291.649466] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:66:plane 2B] min_cdclk 0 kHz

<7> [291.650037] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:75:cursor B] min_cdclk 0 kHz

<7> [291.650513] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe B] min_cdclk 0 kHz

<7> [291.650948] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 1C] min_cdclk 0 kHz

<7> [291.651382] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:90:plane 2C] min_cdclk 0 kHz

<7> [291.651845] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:99:cursor C] min_cdclk 0 kHz

<7> [291.652264] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:104:pipe C] min_cdclk 0 kHz

<7> [291.652732] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:56:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [291.653085] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:80:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [291.653434] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:104:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [291.654047] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [setup_hw_state]

<7> [291.654403] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe B] enable: no [setup_hw_state]

<7> [291.654760] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:104:pipe C] enable: no [setup_hw_state]

<7> [291.655119] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [291.655523] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [291.655836] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [291.656143] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [291.656471] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global

<7> [291.659670] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [291.660121] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [291.660447] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0

<7> [291.683172] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [291.683429] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [291.683646] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [291.683925] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [291.684122] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 0: start 0x8

<7> [291.684374] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 1: start 0x108

<7> [291.684656] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 2: start 0x208

<7> [291.684964] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 3: start 0x308

<7> [291.685221] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 4: start 0x3c8

<7> [291.685481] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 0: start 0x8

<7> [291.685993] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 1: start 0x108

<7> [291.686334] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 2: start 0x208

<7> [291.686706] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 3: start 0x308

<7> [291.687063] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 4: start 0x3c8

<7> [291.687321] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 0: start 0x8

<7> [291.687597] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 1: start 0x108

<7> [291.687910] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 2: start 0x208

<7> [291.688167] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 3: start 0x308

<7> [291.688422] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 4: start 0x3c8

<7> [291.688981] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [fastset]

<7> [291.689329] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe B] enable: no [fastset]

<7> [291.689625] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:104:pipe C] enable: no [fastset]

<7> [291.690117] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A]

<7> [291.690732] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe B]

<7> [291.691150] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:104:pipe C]

<7> [291.691581] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [291.699156] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:106:eDP-1] adding connector to sysfs

<7> [291.702064] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:106:eDP-1] backlight device intel_backlight registered

<7> [291.702447] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:106:eDP-1] Registered panel device 'card1-eDP-1', has fwnode: yes

<7> [291.703512] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card1-eDP-1

<7> [291.707195] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:106:eDP-1] generating connector hotplug event

<7> [291.707300] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:114:DP-1] adding connector to sysfs

<7> [291.708844] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card1-DP-1

<7> [291.711707] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:114:DP-1] generating connector hotplug event

<7> [291.711866] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:123:HDMI-A-1] adding connector to sysfs

<7> [291.713326] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:123:HDMI-A-1] generating connector hotplug event

<7> [291.713486] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:129:DP-2] adding connector to sysfs

<7> [291.715061] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card1-DP-2

<7> [291.717839] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:129:DP-2] generating connector hotplug event

<7> [291.717995] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:135:HDMI-A-2] adding connector to sysfs

<7> [291.719436] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:135:HDMI-A-2] generating connector hotplug event

<6> [291.719573] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 1

<7> [291.725328] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [291.760941] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [291.771230] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input39

<7> [291.774491] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [291.780121] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [291.781355] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:56:pipe A] not active, skipping

<7> [291.781822] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:80:pipe B] not active, skipping

<7> [291.782226] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:104:pipe C] not active, skipping

<7> [291.782648] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config

<7> [291.784853] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:114:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [291.785308] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [291.786346] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [291.786787] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [291.787369] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [291.788468] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [291.788482] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [291.788845] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [291.788943] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [291.789833] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [291.792508] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [291.792520] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [291.793215] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:123:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [291.793676] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [291.798214] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:129:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [291.798729] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [291.799415] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [291.799864] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [291.800706] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [291.801157] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [291.801168] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [291.803175] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [291.807219] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [291.807231] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [291.807912] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:135:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [291.809049] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1]

<7> [291.809061] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [291.809064] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1]

<7> [291.809709] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [291.810120] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [291.810517] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [291.813149] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [291.813166] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor

<7> [291.813176] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0

<7> [291.813215] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no

<7> [291.813694] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [291.814097] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [291.816134] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] status updated from unknown to connected

<7> [291.816171] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [291.816585] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes:

<7> [291.816597] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [291.816608] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [291.816621] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1]

<7> [291.816668] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [291.821233] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected

<7> [291.821252] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]

<7> [291.821263] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [291.822279] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [291.822728] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [291.824258] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [291.824745] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [291.824757] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [291.825127] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [291.834164] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [291.834181] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [291.834856] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected

<7> [291.834872] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2]

<7> [291.834884] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [291.839361] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected

<7> [291.839376] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]

<7> [291.839384] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [291.841619] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [291.842062] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [291.842672] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [291.843117] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [291.843128] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [291.843511] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [291.847059] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [291.847071] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [291.847581] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected

<7> [291.847595] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] enabled? yes

<7> [291.847604] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:114:DP-1] enabled? no

<7> [291.847611] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:123:HDMI-A-1] enabled? no

<7> [291.847618] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:129:DP-2] enabled? no

<7> [291.847625] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:135:HDMI-A-2] enabled? no

<7> [291.847682] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [291.847717] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] found preferred mode: 3200x1800

<7> [291.847726] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [291.847756] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:56:pipe A] desired mode 3200x1800 set (0,0)

<7> [291.847828] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [291.847885] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] no BIOS fb, allocating a new one

<7> [291.854870] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 3200x1800 fb: 0x00180000

<6> [291.856348] fbcon: i915drmfb (fb0) is primary device

<6> [291.857318] Console: switching to colour frame buffer device 200x56

<6> [291.857335] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device

<7> [291.864273] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [291.864291] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [291.864075] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9

<7> [291.864517] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0

<7> [291.865121] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1]

<7> [291.865144] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1]

<7> [291.865146] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no

<7> [291.865645] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no

<7> [291.865852] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [291.866069] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no

<7> [291.866296] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [291.866523] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes

<7> [291.866751] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [291.866984] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes

<7> [291.867385] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no

<7> [291.867820] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes

<7> [291.868230] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no

<7> [291.868826] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [291.868841] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor

<7> [291.868862] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0

<7> [291.868676] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes

<7> [291.868931] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no

<7> [291.869094] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no

<7> [291.869386] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [291.869589] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes

<7> [291.870020] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [291.870022] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no

<7> [291.870472] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes

<7> [291.870918] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes

<7> [291.871325] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no

<7> [291.871752] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no

<7> [291.872121] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes

<7> [291.872509] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes

<7> [291.872966] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no

<7> [291.873370] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz

<7> [291.873921] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes:

<7> [291.873943] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [291.873954] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [291.873967] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1]

<7> [291.874056] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [291.878290] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device

<7> [291.878655] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected

<7> [291.878675] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]

<7> [291.878686] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [291.878832] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [291.879251] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [291.880479] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [291.881081] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [291.881602] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [291.882296] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9

<7> [291.882654] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9

<7> [291.882979] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9

<7> [291.883045] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [291.883297] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0

<7> [291.883477] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [291.883659] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0

<7> [291.883983] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2

<7> [291.884082] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [291.884311] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21

<7> [291.884568] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [291.884579] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [291.884664] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000

<7> [291.884992] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE

<7> [291.884980] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [291.885319] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48

<7> [291.885670] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2

<7> [291.885998] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39

<7> [291.886325] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no

<7> [291.886678] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no

<7> [291.887006] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no

<7> [291.887327] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes

<7> [291.887679] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no

<7> [291.888002] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no

<7> [291.888320] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes

<7> [291.888670] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes

<7> [291.888990] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no

<7> [291.889314] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no

<7> [291.889669] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no

<7> [291.889989] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes

<7> [291.890293] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no

<7> [291.890641] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no

<7> [291.890959] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no

<7> [291.891276] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no

<7> [291.891616] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no

<7> [291.891935] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no

<7> [291.892254] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes

<7> [291.892594] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes

<7> [291.892911] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no

<7> [291.893231] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no

<7> [291.893578] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no

<7> [291.893905] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no

<7> [291.894227] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no

<7> [291.894555] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no

<7> [291.894880] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no

<7> [291.895116] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [291.895129] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [291.895203] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no

<7> [291.895591] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected

<7> [291.895608] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2]

<7> [291.895528] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes

<7> [291.895620] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [291.895858] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no

<7> [291.896178] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes

<7> [291.896507] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes

<7> [291.896835] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no

<7> [291.897151] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes

<7> [291.897465] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no

<7> [291.897798] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no

<7> [291.898059] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no

<7> [291.898313] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no

<7> [291.898650] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled

<7> [291.898965] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403

<7> [291.899283] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001

<7> [291.899620] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3

<7> [291.899941] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007

<7> [291.900164] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected

<7> [291.900183] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]

<7> [291.900195] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [291.900261] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000

<7> [291.900608] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000

<7> [291.900929] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24

<7> [291.901245] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8

<7> [291.901575] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no

<7> [291.901885] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no

<7> [291.901869] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [291.902202] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes

<7> [291.902288] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<6> [291.902515] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [291.902518] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [291.902522] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [291.902948] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [291.903401] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [291.903412] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [291.904557] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [291.909133] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [291.909149] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [291.911363] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected

<7> [291.911380] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] enabled? yes

<7> [291.911390] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:114:DP-1] enabled? no

<7> [291.911399] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:123:HDMI-A-1] enabled? no

<7> [291.911407] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:129:DP-2] enabled? no

<7> [291.911414] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:135:HDMI-A-2] enabled? no

<7> [291.912633] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [291.912680] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] found preferred mode: 3200x1800

<7> [291.912690] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [291.912759] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:56:pipe A] desired mode 3200x1800 set (0,0)

<7> [291.915680] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:106:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [291.916084] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:105:DDI A/PHY A][CRTC:56:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 max link_bpp 24.0000

<7> [291.916431] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000

<7> [291.916894] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [291.917273] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:105:DDI A/PHY A] [CRTC:56:pipe A]

<7> [291.917654] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [291.918000] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [291.918358] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [291.918723] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [291.919080] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [291.919444] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [291.919822] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [291.920186] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [291.920553] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [291.920925] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [291.921302] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [291.921717] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [291.922180] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [291.922567] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [291.922930] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [291.923295] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [291.923663] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [291.924022] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [291.924382] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [291.924750] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [291.925106] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [291.925452] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [291.925823] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [291.926184] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [291.926555] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [291.926910] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [291.927283] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [291.927673] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [291.928026] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [291.928388] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [291.928756] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [291.929118] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [291.929479] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [291.929850] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [291.930213] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [291.930586] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dpll_hw_state

<7> [291.930946] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [291.931307] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0

<7> [291.931658] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [291.932007] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [291.932365] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [291.932729] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [291.933087] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [291.933449] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [291.933820] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset

<7> [291.934457] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [291.934828] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [291.935176] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [291.935519] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [291.935888] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [291.936238] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [291.936605] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [291.937078] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [291.937873] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [291.938220] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [291.938595] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [291.938943] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [291.939299] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:56:pipe A] allocated DPLL 0

<6> [291.939719] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4

<7> [291.939683] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:56:pipe A] reserving DPLL 0

<7> [291.940039] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: yes [modeset]

<7> [291.940391] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [291.940770] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [291.941123] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [291.941477] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [291.941855] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [291.942205] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [291.942580] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [291.942923] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [291.943276] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [291.943673] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [291.944027] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [291.944386] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [291.944759] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [291.945111] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [291.945467] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [291.945844] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [291.946195] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [291.946574] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [291.946925] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [291.947280] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [291.947658] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [291.948013] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [291.948372] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [291.948747] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [291.949098] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [291.949446] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [291.949810] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [291.950153] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [291.950503] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [291.950892] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [291.951242] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [291.951621] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [291.951973] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [291.952316] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [291.952680] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [291.953022] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [291.953365] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [291.953750] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [291.954117] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [291.954471] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [291.954852] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [291.955187] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [291.955530] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:107] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [291.955901] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [291.956244] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [291.956611] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [291.956946] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [291.958558] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [291.959621] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A]

<7> [291.959985] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B]

<7> [291.960344] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A]

<7> [291.960719] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B]

<7> [291.961075] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C]

<7> [291.961430] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C]

<7> [291.961812] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A]

<7> [291.962161] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B]

<7> [291.962508] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C]

<7> [291.963482] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:56:pipe A]

<7> [291.963888] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [291.964607] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power on

<7> [291.965087] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [291.965472] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [291.975588] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [291.975982] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power on

<7> [291.976368] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000000b

<7> [292.189238] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [292.189577] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [292.190213] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [292.191885] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [292.192567] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [292.193823] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [292.194182] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [292.194512] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [292.196009] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Clock recovery OK

<7> [292.196355] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [292.196699] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [292.198300] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [292.198663] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [292.199003] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [292.202479] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [292.202808] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [292.203024] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [292.206495] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [292.206815] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [292.207393] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [292.208167] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [292.208514] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [292.209106] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 37

<7> [292.225143] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [292.227264] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1]

<7> [292.227672] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A]

<7> [292.228495] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp

<6> [292.230367] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])

<7> [292.230664] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [292.230738] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [292.230748] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [292.230875] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1]

<7> [292.230888] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1]

<7> [292.231224] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [292.232610] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [292.232744] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [292.233131] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [292.233475] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [292.234149] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [292.234164] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor

<7> [292.234173] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0

<7> [292.234212] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no

<7> [292.234519] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [292.234824] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [292.237248] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes:

<7> [292.237261] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [292.237272] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [292.237284] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1]

<7> [292.237221] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [292.237295] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [292.242136] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected

<7> [292.242156] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]

<7> [292.242168] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [292.243076] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.243453] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [292.244409] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.244876] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.244889] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.245180] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [292.248768] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.248781] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [292.249133] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected

<7> [292.249146] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2]

<7> [292.249164] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [292.253579] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected

<7> [292.253600] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]

<7> [292.253612] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [292.254243] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.254606] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [292.255124] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.255492] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.255503] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.255852] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [292.259238] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.259252] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [292.259684] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected

<7> [292.259698] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] enabled? yes

<7> [292.259708] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:114:DP-1] enabled? no

<7> [292.259715] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:123:HDMI-A-1] enabled? no

<7> [292.259722] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:129:DP-2] enabled? no

<7> [292.259729] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:135:HDMI-A-2] enabled? no

<7> [292.259777] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [292.259806] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] found preferred mode: 3200x1800

<7> [292.259814] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [292.259860] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:56:pipe A] desired mode 3200x1800 set (0,0)

<7> [292.259882] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1]

<7> [292.259892] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1]

<7> [292.260463] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [292.260836] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [292.261167] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [292.261779] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [292.261816] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [292.261828] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor

<7> [292.261837] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0

<7> [292.261873] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no

<7> [292.262252] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [292.262603] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [292.264565] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes:

<7> [292.264578] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [292.264590] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [292.264703] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1]

<7> [292.264713] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [292.269630] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected

<7> [292.269760] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]

<7> [292.269774] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [292.270641] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.270768] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [292.271042] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [292.271175] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [292.271566] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [292.271669] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.272115] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.271956] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [292.272125] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.272321] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [292.272498] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [292.272707] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [292.273070] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [292.273450] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [292.273889] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [292.276633] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.276646] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [292.277043] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected

<7> [292.277171] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2]

<7> [292.277182] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [292.281962] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected

<7> [292.282096] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]

<7> [292.282107] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [292.282979] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.283327] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [292.284042] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.284419] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.284430] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.284991] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [292.288361] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.288373] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [292.288816] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected

<7> [292.296027] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1]

<7> [292.296043] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<6> [292.297113] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input40

<7> [292.302079] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected

<7> [292.303105] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]

<7> [292.303127] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [292.303905] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.304257] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<6> [292.307570] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input41

<7> [292.308910] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.309339] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.309351] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.311602] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [292.314975] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.314987] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [292.316227] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected

<7> [292.317240] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2]

<7> [292.317253] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [292.322001] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected

<7> [292.322784] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]

<7> [292.322797] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [292.323455] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.323827] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<6> [292.325384] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input42

<7> [292.326591] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.327016] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.327028] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.327374] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [292.334747] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.334763] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [292.335215] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected

<7> [292.336521] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1]

<7> [292.336696] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1]

<7> [292.337161] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [292.337522] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [292.337932] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [292.338677] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [292.338691] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor

<7> [292.338700] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0

<7> [292.338736] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no

<7> [292.339142] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [292.339521] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [292.342445] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes:

<7> [292.342458] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [292.342470] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [292.342523] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1]

<7> [292.342551] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [292.347632] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected

<7> [292.347691] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]

<7> [292.347701] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [292.348379] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.348807] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [292.351666] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.352103] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.352114] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.352485] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [292.362202] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.362216] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [292.362696] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected

<7> [292.363334] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2]

<7> [292.363347] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [292.369889] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected

<7> [292.369941] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]

<7> [292.369952] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [292.376346] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.376898] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [292.377451] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.377859] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.377870] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.378215] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [292.381447] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.381456] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [292.381860] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected

<7> [292.382602] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:139]

<7> [293.421277] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:56:pipe A]

<7> [293.421929] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [293.422433] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [293.422704] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [293.423089] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [293.423476] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [293.423896] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [293.424289] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [293.424700] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [293.425087] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [293.425473] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [293.425898] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [293.426293] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [293.426694] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [293.427085] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [293.427478] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [293.427885] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [293.428275] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [293.428680] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [293.429067] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [293.429462] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [293.429880] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [293.430272] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [293.430681] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [293.431076] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [293.431472] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [293.431885] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [293.432278] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [293.432671] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [293.433060] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [293.433447] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [293.433849] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [293.434224] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [293.434620] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [293.434916] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [293.435152] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [293.435387] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [293.435643] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [293.435927] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [293.436161] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [293.436395] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset

<7> [293.436653] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:56:pipe A] releasing DPLL 0

<7> [293.437064] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [293.437468] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [293.437852] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [293.438206] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [293.438571] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [293.438919] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [293.439162] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [293.439463] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [293.439770] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz

<7> [293.440175] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [293.440562] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [293.440919] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [293.441279] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [modeset]

<7> [293.441655] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [293.441978] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [293.442316] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [293.442785] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [293.444585] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [293.601039] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [293.649923] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 0

<7> [293.651664] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [293.660830] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power off

<7> [293.661352] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [293.661923] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [293.662687] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - short

<7> [293.663348] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [293.714978] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [293.715976] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long

<7> [293.716872] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [293.717449] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [293.719644] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [293.723012] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:105:DDI A/PHY A]

<7> [293.723247] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:56:pipe A]

<7> [293.724309] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A]

<7> [293.725109] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [293.726744] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [293.730149] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A]

<7> [293.731768] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B]

<7> [293.733108] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A]

<7> [293.734559] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B]

<7> [293.736110] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C]

<7> [293.737435] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C]

<7> [293.738920] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A]

<7> [293.740280] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B]

<7> [293.741738] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C]

<7> [293.743136] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1]

<7> [293.745817] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A]

<7> [293.749209] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:80:pipe B]

<7> [293.750619] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:104:pipe C]

<7> [293.850166] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [293.851747] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [293.853257] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [293.855261] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [293.859255] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [293.876759] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [293.965696] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:106:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [293.966713] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:105:DDI A/PHY A][CRTC:56:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 max link_bpp 24.0000

<7> [293.967513] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000

<7> [293.968417] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [293.969663] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:105:DDI A/PHY A] [CRTC:56:pipe A]

<7> [293.970676] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [293.971505] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [293.973107] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [293.974070] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [293.975289] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [293.976585] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [293.978093] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [293.979633] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [293.981031] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [293.982388] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [293.983749] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [293.985079] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [293.986337] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [293.987321] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [293.988497] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [293.989479] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [293.990523] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [293.991445] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [293.992559] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [293.993473] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [293.994524] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [293.995725] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [293.996737] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [293.997740] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [293.998844] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [293.999903] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [294.001041] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [294.001949] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [294.003018] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [294.003898] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [294.005198] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [294.006251] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [294.007319] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [294.008254] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [294.009310] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [294.010210] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [294.011246] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [294.012166] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [294.013246] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [294.014242] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset

<7> [294.015510] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [294.016509] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [294.017579] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [294.018385] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [294.019275] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [294.020359] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [294.021252] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [294.022485] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [294.023836] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [294.024936] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [294.025870] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [294.026944] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [294.027821] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:56:pipe A] allocated DPLL 0

<7> [294.028945] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:56:pipe A] reserving DPLL 0

<7> [294.029897] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: yes [modeset]

<7> [294.031040] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [294.032144] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [294.033191] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [294.034106] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [294.035099] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [294.036054] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [294.037106] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [294.038006] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [294.039068] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [294.039980] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [294.041035] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [294.041932] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [294.043132] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [294.044089] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [294.045181] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [294.046053] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [294.047114] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [294.048001] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [294.049033] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [294.049951] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [294.051025] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [294.051900] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [294.052988] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [294.053894] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [294.054978] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [294.055881] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [294.056923] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [294.057816] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [294.058899] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [294.059850] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [294.060900] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [294.061775] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [294.062876] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [294.063802] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [294.064875] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [294.065789] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [294.066869] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [294.067747] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [294.068789] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [294.069936] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [294.071102] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [294.072007] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [294.073050] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:107] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [294.073935] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [294.075015] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [294.075951] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [294.077026] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [294.089705] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [294.102200] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [294.102768] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [294.103680] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [294.104704] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [294.105700] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [294.106990] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A]

<7> [294.107547] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B]

<7> [294.108062] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A]

<7> [294.108599] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B]

<7> [294.109116] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C]

<7> [294.109664] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C]

<7> [294.110156] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A]

<7> [294.110606] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B]

<7> [294.111037] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C]

<7> [294.111780] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:56:pipe A]

<7> [294.112241] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [294.113008] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power on

<7> [294.113610] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (106 ms remaining)

<7> [294.226021] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [294.276028] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [294.276891] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power on

<7> [294.277684] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003

<7> [294.326970] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [294.328093] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long

<7> [294.329118] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [294.331620] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A]

<7> [294.480815] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [294.482171] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [294.483494] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [294.486027] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turning VDD on

<7> [294.487315] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b

<7> [294.493996] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [294.495249] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [294.498959] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [294.500703] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [294.502206] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [294.506009] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Clock recovery OK

<7> [294.507413] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [294.508872] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [294.513012] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [294.514577] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [294.516088] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [294.520271] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [294.521656] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [294.524235] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [294.527569] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [294.529048] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [294.531179] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 37

<7> [294.535958] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 384 us, max time under evasion is 250 us

<7> [294.543331] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [294.550908] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1]

<7> [294.552416] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A]

<7> [294.557276] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [294.558674] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [294.563101] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [294.570159] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [294.571594] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [294.573609] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [294.575003] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [294.575038] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [294.576886] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [294.582836] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [294.582872] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [294.590731] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [294.596471] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [294.598014] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [294.599298] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [294.601164] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [294.602698] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [294.602733] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [294.603989] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [294.609561] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [294.609586] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [294.700189] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [294.701041] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [294.713720] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [294.739118] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [294.739493] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [294.751694] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [294.794409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [294.795638] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [294.803570] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [294.803895] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [294.804157] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [294.804414] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [294.805013] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [294.805314] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [294.805691] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [294.806026] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [294.806291] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [294.807142] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [294.886610] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [294.887477] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [294.887875] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [294.888444] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<6> [294.892042] Console: switching to colour dummy device 80x25

<7> [294.898767] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:107] is removed

<7> [294.898895] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [294.899454] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [294.900289] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [294.901107] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [294.901911] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [294.903120] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [294.910198] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [294.911186] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [294.912076] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [294.912911] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [294.913712] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [294.914479] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [294.915156] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [294.915999] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [294.916818] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [294.917632] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [294.918420] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [294.919224] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [294.920040] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [294.920597] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [294.921200] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [294.922011] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [294.922844] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [294.923661] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [294.924444] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [294.925249] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [294.925999] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [294.926636] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [294.927416] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [294.928261] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [294.929067] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [294.929876] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [294.930671] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [294.931324] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [294.931877] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [294.932431] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [294.933223] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [294.934039] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [294.934850] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [294.935677] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [294.936456] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [294.937054] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [294.937697] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [294.938404] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [294.939231] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [294.940040] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [294.940854] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset

<7> [294.941488] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:56:pipe A] releasing DPLL 0

<7> [294.942399] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [294.943684] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [294.944737] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [294.945588] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [294.946381] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [294.947211] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [294.948097] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [modeset]

<7> [294.948939] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [294.949795] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [294.950619] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [294.952414] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [295.161863] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 0

<7> [295.164177] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [295.180776] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power off

<7> [295.181895] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [295.182998] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - short

<7> [295.184290] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [295.186057] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [295.236987] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [295.238273] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long

<7> [295.239406] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [295.240966] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [295.243826] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:56:pipe A]

<7> [295.243897] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:105:DDI A/PHY A]

<7> [295.245749] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A]

<7> [295.246150] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [295.248014] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [295.251683] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A]

<7> [295.253138] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B]

<7> [295.254459] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A]

<7> [295.255892] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B]

<7> [295.257056] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C]

<7> [295.258447] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C]

<7> [295.259719] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A]

<7> [295.261097] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B]

<7> [295.262286] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C]

<7> [295.263742] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1]

<7> [295.266909] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A]

<7> [295.337908] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [295.372019] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:106:eDP-1] removing connector from sysfs

<7> [295.387406] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:114:DP-1] removing connector from sysfs

<7> [295.391327] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:123:HDMI-A-1] removing connector from sysfs

<7> [295.401510] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:129:DP-2] removing connector from sysfs

<7> [295.405328] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:135:HDMI-A-2] removing connector from sysfs

<7> [295.427456] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (315 ms remaining)

<7> [295.746183] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [295.777736] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<6> [296.465412] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS

<6> [296.466467] [IGT] i915_pm_rpm: exiting, ret=0

Results for igt@i915_pm_rpm@module-reload