Results for igt@kms_pm_dc@dc6-dpms

Result: Fail

git-log-oneline i915_display_info21 igt_runner21 runtimes21 results21.json results21-i915-load.json i915_display_info_post_exec21 boot21 dmesg21

DetailValue
Duration 3.34 seconds
Hostname 
shard-rkl-6
Igt-Version 
IGT-Version: 2.2-gcddd42d00 (x86_64) (Linux: 6.17.0-CI_DRM_17327-gf929eafc9534+ x86_64)
Out 
Using IGT_SRANDOM=1759972799 for randomisation
Opened device: /dev/dri/card0
DMC: fw loaded: yes
Starting subtest: dc6-dpms
Stack trace:
  #0 ../lib/igt_core.c:2075 __igt_fail_assert()
  #1 [check_dc_counter.part.0+0x66]
  #2 [test_dc_state_dpms+0x72]
  #3 ../tests/intel/kms_pm_dc.c:827 __igt_unique____real_main733()
  #4 [main+0x2d]
  #5 [__libc_init_first+0x8a]
  #6 [__libc_start_main+0x8b]
  #7 [_start+0x25]
Subtest dc6-dpms: FAIL (3.338s)
Err 
Starting subtest: dc6-dpms
(kms_pm_dc:2033) CRITICAL: Test assertion failure function check_dc_counter, file ../tests/intel/kms_pm_dc.c:329:
(kms_pm_dc:2033) CRITICAL: Failed assertion: dc_state_wait_entry(data->debugfs_fd, dc_flag, prev_dc_count)
(kms_pm_dc:2033) CRITICAL: DC6 state is not achieved
i915_power_domain_info:
Runtime power status: enabled
Power well/domain         Use count
always-on                 0
  DISPLAY_CORE            0
  PIPE_A                  0
  PIPE_B                  0
  PIPE_C                  0
  PIPE_D                  0
  PIPE_PANEL_FITTER_A     0
  PIPE_PANEL_FITTER_B     0
  PIPE_PANEL_FITTER_C     0
  PIPE_PANEL_FITTER_D     0
  TRANSCODER_A            0
  TRANSCODER_B            0
  TRANSCODER_C            0
  TRANSCODER_D            0
  TRANSCODER_EDP          0
  TRANSCODER_DSI_A        0
  TRANSCODER_DSI_C        0
  TRANSCODER_VDSC_PW2     0
  PORT_DDI_LANES_A        0
  PORT_DDI_LANES_B        0
  PORT_DDI_LANES_C        0
  PORT_DDI_LANES_D        0
  PORT_DDI_LANES_E        0
  PORT_DDI_LANES_F        0
  PORT_DDI_LANES_TC1      0
  PORT_DDI_LANES_TC2      0
  PORT_DDI_LANES_TC3      0
  PORT_DDI_LANES_TC4      0
  PORT_DDI_LANES_TC5      0
  PORT_DDI_LANES_TC6      0
  PORT_DDI_IO_A           0
  PORT_DDI_IO_B           0
  PORT_DDI_IO_C           0
  PORT_DDI_IO_D           0
  PORT_DDI_IO_E           0
  PORT_DDI_IO_F           0
  PORT_DDI_IO_TC1         0
  PORT_DDI_IO_TC2         0
  PORT_DDI_IO_TC3         0
  PORT_DDI_IO_TC4         0
  PORT_DDI_IO_TC5         0
  PORT_DDI_IO_TC6         0
  PORT_DSI                0
  PORT_CRT                0
  PORT_OTHER              0
  VGA                     0
  AUDIO_MMIO              0
  AUDIO_PLAYBACK          0
  AUX_IO_A                0
  AUX_IO_B                0
  AUX_IO_C                0
  AUX_IO_D                0
  AUX_IO_E                0
  AUX_IO_F                0
  AUX_A                   0
  AUX_B                   0
  AUX_C                   0
  AUX_D                   0
  AUX_E                   0
  AUX_F                   0
  AUX_USBC1               0
  AUX_USBC2               0
  AUX_USBC3               0
  AUX_USBC4               0
  AUX_USBC5               0
  AUX_USBC6               0
  AUX_TBT1                0
  AUX_TBT2                0
  AUX_TBT3                0
  AUX_TBT4                0
  AUX_TBT5                0
  AUX_TBT6                0
  GMBUS                   0
  GT_IRQ                  0
  DC_OFF                  0
  TC_COLD_OFF             0
  INIT                    0
PW_1                      0
DC_off                    0
  PIPE_B                  0
  PIPE_C                  0
  PIPE_PANEL_FITTER_B     0
  PIPE_PANEL_FITTER_C     0
  TRANSCODER_B            0
  TRANSCODER_C            0
  PORT_DDI_LANES_TC1      0
  PORT_DDI_LANES_TC2      0
  VGA                     0
  AUDIO_MMIO              0
  AUDIO_PLAYBACK          0
  AUX_A                   0
  AUX_B                   0
  AUX_USBC1               0
  AUX_USBC2               0
  DC_OFF                  0
  INIT                    0
PW_3                      0
  PIPE_B                  0
  PIPE_C                  0
  PIPE_PANEL_FITTER_B     0
  PIPE_PANEL_FITTER_C     0
  TRANSCODER_B            0
  TRANSCODER_C            0
  PORT_DDI_LANES_TC1      0
  PORT_DDI_LANES_TC2      0
  VGA                     0
  AUDIO_MMIO              0
  AUDIO_PLAYBACK          0
  AUX_USBC1               0
  AUX_USBC2               0
  INIT                    0
PW_4                      0
  PIPE_C                  0
  PIPE_PANEL_FITTER_C     0
  TRANSCODER_C            0
  INIT                    0
DDI_IO_A                  0
  PORT_DDI_IO_A           0
DDI_IO_B                  0
  PORT_DDI_IO_B           0
DDI_IO_TC1                0
  PORT_DDI_IO_TC1         0
DDI_IO_TC2                0
  PORT_DDI_IO_TC2         0
AUX_A                     0
  AUX_IO_A                0
  AUX_A                   0
AUX_B                     0
  AUX_IO_B                0
  AUX_B                   0
AUX_USBC1                 0
  AUX_USBC1               0
AUX_USBC2                 0
  AUX_USBC2               0
Subtest dc6-dpms failed.
**** DEBUG ****
(kms_pm_dc:2033) DEBUG: Test requirement passed: igt_pm_pc8_plus_residencies_enabled(data.msr_fd)
(kms_pm_dc:2033) DEBUG: Test requirement passed: !(!str)
(kms_pm_dc:2033) CRITICAL: Test assertion failure function check_dc_counter, file ../tests/intel/kms_pm_dc.c:329:
(kms_pm_dc:2033) CRITICAL: Failed assertion: dc_state_wait_entry(data->debugfs_fd, dc_flag, prev_dc_count)
(kms_pm_dc:2033) CRITICAL: DC6 state is not achieved
i915_power_domain_info:
Runtime power status: enabled
Power well/domain         Use count
always-on                 0
  DISPLAY_CORE            0
  PIPE_A                  0
  PIPE_B                  0
  PIPE_C                  0
  PIPE_D                  0
  PIPE_PANEL_FITTER_A     0
  PIPE_PANEL_FITTER_B     0
  PIPE_PANEL_FITTER_C     0
  PIPE_PANEL_FITTER_D     0
  TRANSCODER_A            0
  TRANSCODER_B            0
  TRANSCODER_C            0
  TRANSCODER_D            0
  TRANSCODER_EDP          0
  TRANSCODER_DSI_A        0
  TRANSCODER_DSI_C        0
  TRANSCODER_VDSC_PW2     0
  PORT_DDI_LANES_A        0
  PORT_DDI_LANES_B        0
  PORT_DDI_LANES_C        0
  PORT_DDI_LANES_D        0
  PORT_DDI_LANES_E        0
  PORT_DDI_LANES_F        0
  PORT_DDI_LANES_TC1      0
  PORT_DDI_LANES_TC2      0
  PORT_DDI_LANES_TC3      0
  PORT_DDI_LANES_TC4      0
  PORT_DDI_LANES_TC5      0
  PORT_DDI_LANES_TC6      0
  PORT_DDI_IO_A           0
  PORT_DDI_IO_B           0
  PORT_DDI_IO_C           0
  PORT_DDI_IO_D           0
  PORT_DDI_IO_E           0
  PORT_DDI_IO_F           0
  PORT_DDI_IO_TC1         0
  PORT_DDI_IO_TC2         0
  PORT_DDI_IO_TC3         0
  PORT_DDI_IO_TC4         0
  PORT_DDI_IO_TC5         0
  PORT_DDI_IO_TC6         0
  PORT_DSI                0
  PORT_CRT                0
  PORT_OTHER              0
  VGA                     0
  AUDIO_MMIO              0
  AUDIO_PLAYBACK          0
  AUX_IO_A                0
  AUX_IO_B                0
  AUX_IO_C                0
  AUX_IO_D                0
  AUX_IO_E                0
  AUX_IO_F                0
  AUX_A                   0
  AUX_B                   0
  AUX_C                   0
  AUX_D                   0
  AUX_E                   0
  AUX_F                   0
  AUX_USBC1               0
  AUX_USBC2               0
  AUX_USBC3               0
  AUX_USBC4               0
  AUX_USBC5               0
  AUX_USBC6               0
  AUX_TBT1                0
  AUX_TBT2                0
  AUX_TBT3                0
  AUX_TBT4                0
  AUX_TBT5                0
  AUX_TBT6                0
  GMBUS                   0
  GT_IRQ                  0
  DC_OFF                  0
  TC_COLD_OFF             0
  INIT                    0
PW_1                      0
DC_off                    0
  PIPE_B                  0
  PIPE_C                  0
  PIPE_PANEL_FITTER_B     0
  PIPE_PANEL_FITTER_C     0
  TRANSCODER_B            0
  TRANSCODER_C            0
  PORT_DDI_LANES_TC1      0
  PORT_DDI_LANES_TC2      0
  VGA                     0
  AUDIO_MMIO              0
  AUDIO_PLAYBACK          0
  AUX_A                   0
  AUX_B                   0
  AUX_USBC1               0
  AUX_USBC2               0
  DC_OFF                  0
  INIT                    0
PW_3                      0
  PIPE_B                  0
  PIPE_C                  0
  PIPE_PANEL_FITTER_B     0
  PIPE_PANEL_FITTER_C     0
  TRANSCODER_B            0
  TRANSCODER_C            0
  PORT_DDI_LANES_TC1      0
  PORT_DDI_LANES_TC2      0
  VGA                     0
  AUDIO_MMIO              0
  AUDIO_PLAYBACK          0
  AUX_USBC1               0
  AUX_USBC2               0
  INIT                    0
PW_4                      0
  PIPE_C                  0
  PIPE_PANEL_FITTER_C     0
  TRANSCODER_C            0
  INIT                    0
DDI_IO_A                  0
  PORT_DDI_IO_A           0
DDI_IO_B                  0
  PORT_DDI_IO_B           0
DDI_IO_TC1                0
  PORT_DDI_IO_TC1         0
DDI_IO_TC2                0
  PORT_DDI_IO_TC2         0
AUX_A                     0
  AUX_IO_A                0
  AUX_A                   0
AUX_B                     0
  AUX_IO_B                0
  AUX_B                   0
AUX_USBC1                 0
  AUX_USBC1               0
AUX_USBC2                 0
  AUX_USBC2               0
(kms_pm_dc:2033) igt_core-INFO: Stack trace:
(kms_pm_dc:2033) igt_core-INFO:   #0 ../lib/igt_core.c:2075 __igt_fail_assert()
(kms_pm_dc:2033) igt_core-INFO:   #1 [check_dc_counter.part.0+0x66]
(kms_pm_dc:2033) igt_core-INFO:   #2 [test_dc_state_dpms+0x72]
(kms_pm_dc:2033) igt_core-INFO:   #3 ../tests/intel/kms_pm_dc.c:827 __igt_unique____real_main733()
(kms_pm_dc:2033) igt_core-INFO:   #4 [main+0x2d]
(kms_pm_dc:2033) igt_core-INFO:   #5 [__libc_init_first+0x8a]
(kms_pm_dc:2033) igt_core-INFO:   #6 [__libc_start_main+0x8b]
(kms_pm_dc:2033) igt_core-INFO:   #7 [_start+0x25]
****  END  ****
Subtest dc6-dpms: FAIL (3.338s)
Dmesg
<6> [63.169689] [IGT] kms_pm_dc: executing
<7> [63.181740] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [63.183198] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [63.183497] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [63.198286] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [64.187741] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [64.193017] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [64.193703] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [64.193957] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [64.194303] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [64.194470] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [64.194915] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [64.219381] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [64.220284] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [64.221048] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [64.221907] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [64.222855] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [64.223795] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [64.224637] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [64.225153] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [64.225365] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [64.225845] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [64.226015] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [64.226551] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [64.227289] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [64.227458] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [64.236070] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [64.237472] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [64.237652] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [64.243460] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [64.249524] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [64.255665] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [64.260546] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [64.260778] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [64.265870] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:148:HDMI-A-1]
<7> [64.265877] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [64.266552] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [64.267983] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [64.268437] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [64.268748] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [64.268911] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [64.269126] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [64.293354] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [64.293623] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [64.293995] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [64.294497] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [64.295019] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [64.295592] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [64.296057] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [64.296560] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [64.297048] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [64.298178] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [64.298657] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [64.299593] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [64.301495] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [64.302177] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [64.314836] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [64.315014] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [64.319830] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:148:HDMI-A-1] disconnected
<7> [64.320001] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [64.324703] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [64.329552] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [64.334442] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [64.339322] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [64.339524] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:158:HDMI-A-2]
<7> [64.339496] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [64.339529] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [64.345376] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [64.346739] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [64.347126] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [64.347468] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [64.347633] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [64.347828] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [64.371304] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [64.371629] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [64.372086] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [64.372673] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [64.373314] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [64.373994] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [64.374596] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [64.375299] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [64.375971] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [64.377249] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [64.377860] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [64.379155] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [64.379898] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [64.380063] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [64.389961] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [64.390173] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [64.394903] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:158:HDMI-A-2] disconnected
<7> [64.394971] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [64.400949] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [64.405931] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [64.410739] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [64.415605] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [64.415775] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [64.415886] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:162:DP-1]
<7> [64.415891] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [64.420443] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [64.421850] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [64.422113] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [64.422433] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [64.422596] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [64.422789] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [64.446310] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [64.446627] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [64.447069] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [64.447654] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [64.448281] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [64.448963] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [64.449565] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [64.450225] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [64.450831] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [64.451530] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [64.452077] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [64.452809] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [64.455205] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [64.456141] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [64.466414] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [64.466599] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [64.472500] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:162:DP-1] disconnected
<7> [64.472589] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [64.478596] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [64.483577] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [64.488399] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [64.493285] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [64.493491] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:169:HDMI-A-3]
<7> [64.493455] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [64.493496] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [64.498061] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [64.499480] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [64.499739] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [64.500043] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [64.500242] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [64.500454] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [64.524282] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [64.524605] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [64.525063] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [64.525657] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [64.526290] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [64.526963] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [64.527591] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [64.528269] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [64.528933] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [64.529656] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [64.530302] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [64.531130] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [64.533627] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [64.534425] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [64.544695] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [64.544871] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [64.550773] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:169:HDMI-A-3] disconnected
<7> [64.550858] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [64.555695] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [64.560580] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [64.565446] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [64.570333] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [64.570548] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:148:HDMI-A-1]
<7> [64.570505] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [64.570553] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [64.575185] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [64.576556] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [64.576818] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [64.577141] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [64.577340] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [64.577538] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [64.601234] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [64.601571] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [64.602016] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [64.602557] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [64.603179] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [64.603900] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [64.604535] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [64.605190] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [64.605764] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [64.606516] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [64.607229] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [64.608045] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [64.610250] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [64.610921] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [64.621278] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [64.621434] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [64.626208] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:148:HDMI-A-1] disconnected
<7> [64.626254] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:158:HDMI-A-2]
<7> [64.626258] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [64.632253] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:158:HDMI-A-2] disconnected
<7> [64.632358] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [64.638344] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [64.643286] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [64.648174] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [64.653043] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:162:DP-1]
<7> [64.653026] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [64.653048] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [64.653231] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [64.657824] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [64.659245] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [64.659496] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [64.659805] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [64.659971] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [64.660225] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [64.684340] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [64.684699] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [64.685262] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [64.685795] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [64.686487] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [64.687038] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [64.687790] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [64.688461] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [64.689077] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [64.689757] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [64.690430] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [64.691251] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [64.693443] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [64.694046] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [64.704455] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [64.704670] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [64.709385] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:162:DP-1] disconnected
<7> [64.709427] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:169:HDMI-A-3]
<7> [64.709431] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [64.714237] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:169:HDMI-A-3] disconnected
<7> [64.714308] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [64.719133] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [64.724001] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [64.728864] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [64.733754] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [64.733923] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<6> [64.736502] [IGT] kms_pm_dc: starting subtest dc6-dpms
<7> [64.738554] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [64.739950] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [64.740265] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [64.740571] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [64.740732] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [64.740923] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [64.764290] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [64.764590] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [64.765026] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [64.765612] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [64.766253] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [64.766921] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [64.767521] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [64.768175] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [64.768814] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [64.769487] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [64.770040] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [64.770802] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [64.772849] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [64.773618] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [64.783909] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [64.785113] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [64.785310] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [64.790061] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [64.794930] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [64.801058] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [64.805887] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<6> [68.074434] [IGT] kms_pm_dc: finished subtest dc6-dpms, FAIL
<6> [68.074818] [IGT] kms_pm_dc: exiting, ret=98
<7> [68.076756] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [68.077047] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
Created at 2025-10-09 08:47:45