<5>[ 0.000000] Linux version 6.14.0-CI_DRM_16367-g71dac8dae6cc+ (kbuild@gfx-ci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Thu Apr 3 11:48:47 UTC 2025
<6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast ro
<6>[ 0.000000] KERNEL supported cpus:
<6>[ 0.000000] Intel GenuineIntel
<6>[ 0.000000] AMD AuthenticAMD
<6>[ 0.000000] Hygon HygonGenuine
<6>[ 0.000000] Centaur CentaurHauls
<6>[ 0.000000] zhaoxin Shanghai
<6>[ 0.000000] x86/tme: not enabled by BIOS
<6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
<6>[ 0.000000] BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000060a3efff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000060a3f000-0x0000000063db6fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000063db7000-0x0000000063edbfff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x0000000063edc000-0x0000000063ffefff] ACPI data
<6>[ 0.000000] BIOS-e820: [mem 0x0000000063fff000-0x0000000063ffffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000064000000-0x00000000787fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000000ffffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable
<6>[ 0.000000] NX (Execute Disable) protection: active
<6>[ 0.000000] APIC: Static calls initialized
<6>[ 0.000000] efi: EFI v2.7 by Intel
<6>[ 0.000000] efi: ACPI=0x63ffe000 ACPI 2.0=0x63ffe014 TPMFinalLog=0x63e11000 SMBIOS=0x60b16000 MEMATTR=0x5bd95698 ESRT=0x5bda7898 MOKvar=0x60c4b000 TPMEventLog=0x63f0f018
<6>[ 0.000000] efi: Remove mem301: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
<6>[ 0.000000] efi: Remove mem303: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved
<6>[ 0.000000] SMBIOS 3.6 present.
<6>[ 0.000000] DMI: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024
<6>[ 0.000000] DMI: Memory slots populated: 8/8
<6>[ 0.000000] tsc: Detected 3400.000 MHz processor
<6>[ 0.000000] tsc: Detected 3379.200 MHz TSC
<7>[ 0.000010] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[ 0.000011] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[ 0.000015] last_pfn = 0x880000 max_arch_pfn = 0x400000000
<6>[ 0.000019] MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs
<6>[ 0.000021] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
<6>[ 0.000603] x2apic: enabled by BIOS, switching to x2apic ops
<6>[ 0.000605] last_pfn = 0x64000 max_arch_pfn = 0x400000000
<6>[ 0.004865] esrt: Reserving ESRT space from 0x000000005bda7898 to 0x000000005bda79c0.
<7>[ 0.004876] e820: update [mem 0x5bda7000-0x5bda7fff] usable ==> reserved
<6>[ 0.004903] Using GB pages for direct mapping
<6>[ 0.005647] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes
<6>[ 0.005650] printk: early log buf free: 258872(98%)
<6>[ 0.005651] Secure boot disabled
<6>[ 0.005654] ACPI: Early table checksum verification disabled
<6>[ 0.005659] ACPI: RSDP 0x0000000063FFE014 000024 (v02 INTEL )
<6>[ 0.005664] ACPI: XSDT 0x0000000063F15228 000184 (v01 INTEL MTL 00000002 01000013)
<6>[ 0.005669] ACPI: FACP 0x0000000063FDC000 000114 (v06 INTEL MTL 00000002 01000013)
<6>[ 0.005673] ACPI: DSDT 0x0000000063F55000 083F8A (v02 INTEL MTL 00000002 01000013)
<6>[ 0.005675] ACPI: FACS 0x0000000063DF7000 000040
<6>[ 0.005676] ACPI: SSDT 0x0000000063FFC000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930)
<6>[ 0.005678] ACPI: SSDT 0x0000000063FFB000 00070D (v02 PmRef Cpu0Ist 00003000 INTL 20210930)
<6>[ 0.005680] ACPI: SSDT 0x0000000063FFA000 0005E4 (v02 PmRef Cpu0Hwp 00003000 INTL 20210930)
<6>[ 0.005682] ACPI: SSDT 0x0000000063FF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930)
<6>[ 0.005683] ACPI: SSDT 0x0000000063FF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930)
<6>[ 0.005684] ACPI: SSDT 0x0000000063FF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930)
<6>[ 0.005686] ACPI: SSDT 0x0000000063FF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930)
<6>[ 0.005688] ACPI: SSDT 0x0000000063FF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930)
<6>[ 0.005690] ACPI: SSDT 0x0000000063FF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930)
<6>[ 0.005692] ACPI: SSDT 0x0000000063FED000 003BC8 (v02 CpuRef CpuSsdt 00003000 INTL 20210930)
<6>[ 0.005694] ACPI: DTPR 0x0000000063FEC000 000098 (v01 00000000 00000000)
<6>[ 0.005696] ACPI: SSDT 0x0000000063FEB000 000D03 (v02 INTEL PDatTabl 00001000 INTL 20210930)
<6>[ 0.005697] ACPI: SSDT 0x0000000063FE8000 002494 (v02 INTEL IgfxSsdt 00003000 INTL 20210930)
<6>[ 0.005699] ACPI: SSDT 0x0000000063FDE000 009AB7 (v02 INTEL TcssSsdt 00001000 INTL 20210930)
<6>[ 0.005701] ACPI: SSDT 0x0000000063FDD000 0000F9 (v02 INTEL IpuSsdt 00001000 INTL 20210930)
<6>[ 0.005703] ACPI: HPET 0x0000000063FDB000 000038 (v01 INTEL MTL 00000002 01000013)
<6>[ 0.005705] ACPI: APIC 0x0000000063FDA000 000358 (v05 INTEL MTL 00000002 01000013)
<6>[ 0.005707] ACPI: MCFG 0x0000000063FD9000 00003C (v01 INTEL MTL 00000002 01000013)
<6>[ 0.005708] ACPI: SSDT 0x0000000063F45000 00FCEF (v02 INTEL MtlP_Rvp 00001000 INTL 20210930)
<6>[ 0.005710] ACPI: SSDT 0x0000000063F43000 00147F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930)
<6>[ 0.005712] ACPI: SSDT 0x0000000063F3E000 00389C (v02 INTEL Ther_Rvp 00001000 INTL 20210930)
<6>[ 0.005713] ACPI: SSDT 0x0000000063F38000 00535A (v02 DptfTb DptfTabl 00001000 INTL 20210930)
<6>[ 0.005714] ACPI: SSDT 0x0000000063FFD000 00060E (v02 INTEL Tpm2Tabl 00001000 INTL 20210930)
<6>[ 0.005716] ACPI: TPM2 0x0000000063F37000 00004C (v04 INTEL MTL 00000002 01000013)
<6>[ 0.005718] ACPI: LPIT 0x0000000063F36000 0000CC (v01 INTEL MTL 00000002 01000013)
<6>[ 0.005720] ACPI: WSMT 0x0000000063F35000 000028 (v01 INTEL MTL 00000002 01000013)
<6>[ 0.005722] ACPI: SSDT 0x0000000063F34000 000CA6 (v02 INTEL PtidDevc 00001000 INTL 20210930)
<6>[ 0.005724] ACPI: SSDT 0x0000000063F2E000 00587D (v02 INTEL TbtTypeC 00000000 INTL 20210930)
<6>[ 0.005725] ACPI: DBGP 0x0000000063F2D000 000034 (v01 INTEL MTL 00000002 01000013)
<6>[ 0.005727] ACPI: DBG2 0x0000000063F2C000 000054 (v00 INTEL MTL 00000002 01000013)
<6>[ 0.005729] ACPI: NHLT 0x0000000063F2B000 00098B (v00 INTEL MTL 00000002 01000013)
<6>[ 0.005730] ACPI: SSDT 0x0000000063F29000 001191 (v02 INTEL UsbCTabl 00001000 INTL 20210930)
<6>[ 0.005732] ACPI: SSDT 0x0000000063F23000 005CAE (v02 INTEL EcSsdt 00000000 INTL 20210930)
<6>[ 0.005734] ACPI: ECDT 0x0000000063F22000 000069 (v01 MTL 00000002 01000013)
<6>[ 0.005735] ACPI: DMAR 0x0000000063F21000 0000A8 (v01 INTEL MTL 00000002 01000013)
<6>[ 0.005737] ACPI: FPDT 0x0000000063F20000 000044 (v01 INTEL MTL 00000002 01000013)
<6>[ 0.005739] ACPI: SSDT 0x0000000063F1E000 001015 (v02 INTEL xh_mtlp3 00000000 INTL 20210930)
<6>[ 0.005741] ACPI: SSDT 0x0000000063F1B000 00281A (v02 SocGpe SocGpe 00003000 INTL 20210930)
<6>[ 0.005742] ACPI: SSDT 0x0000000063F18000 0028D3 (v02 SocCmn SocCmn 00003000 INTL 20210930)
<6>[ 0.005744] ACPI: SSDT 0x0000000063F16000 0011A0 (v02 INTEL St00Ssdt 00001000 INTL 20210930)
<6>[ 0.005745] ACPI: ASF! 0x0000000063F42000 000074 (v32 INTEL MTL 00000002 01000013)
<6>[ 0.005747] ACPI: PHAT 0x0000000063F14000 000810 (v01 INTEL MTL 00000005 MSFT 0100000D)
<6>[ 0.005749] ACPI: BGRT 0x0000000063F13000 000038 (v01 INTEL MTL 00000002 01000013)
<6>[ 0.005751] ACPI: Reserving FACP table memory at [mem 0x63fdc000-0x63fdc113]
<6>[ 0.005752] ACPI: Reserving DSDT table memory at [mem 0x63f55000-0x63fd8f89]
<6>[ 0.005753] ACPI: Reserving FACS table memory at [mem 0x63df7000-0x63df703f]
<6>[ 0.005753] ACPI: Reserving SSDT table memory at [mem 0x63ffc000-0x63ffc38b]
<6>[ 0.005754] ACPI: Reserving SSDT table memory at [mem 0x63ffb000-0x63ffb70c]
<6>[ 0.005754] ACPI: Reserving SSDT table memory at [mem 0x63ffa000-0x63ffa5e3]
<6>[ 0.005755] ACPI: Reserving SSDT table memory at [mem 0x63ff9000-0x63ff91aa]
<6>[ 0.005755] ACPI: Reserving SSDT table memory at [mem 0x63ff8000-0x63ff8393]
<6>[ 0.005756] ACPI: Reserving SSDT table memory at [mem 0x63ff6000-0x63ff7bae]
<6>[ 0.005756] ACPI: Reserving SSDT table memory at [mem 0x63ff4000-0x63ff561f]
<6>[ 0.005756] ACPI: Reserving SSDT table memory at [mem 0x63ff2000-0x63ff3348]
<6>[ 0.005757] ACPI: Reserving SSDT table memory at [mem 0x63ff1000-0x63ff1fba]
<6>[ 0.005757] ACPI: Reserving SSDT table memory at [mem 0x63fed000-0x63ff0bc7]
<6>[ 0.005758] ACPI: Reserving DTPR table memory at [mem 0x63fec000-0x63fec097]
<6>[ 0.005758] ACPI: Reserving SSDT table memory at [mem 0x63feb000-0x63febd02]
<6>[ 0.005759] ACPI: Reserving SSDT table memory at [mem 0x63fe8000-0x63fea493]
<6>[ 0.005759] ACPI: Reserving SSDT table memory at [mem 0x63fde000-0x63fe7ab6]
<6>[ 0.005759] ACPI: Reserving SSDT table memory at [mem 0x63fdd000-0x63fdd0f8]
<6>[ 0.005760] ACPI: Reserving HPET table memory at [mem 0x63fdb000-0x63fdb037]
<6>[ 0.005760] ACPI: Reserving APIC table memory at [mem 0x63fda000-0x63fda357]
<6>[ 0.005761] ACPI: Reserving MCFG table memory at [mem 0x63fd9000-0x63fd903b]
<6>[ 0.005761] ACPI: Reserving SSDT table memory at [mem 0x63f45000-0x63f54cee]
<6>[ 0.005761] ACPI: Reserving SSDT table memory at [mem 0x63f43000-0x63f4447e]
<6>[ 0.005762] ACPI: Reserving SSDT table memory at [mem 0x63f3e000-0x63f4189b]
<6>[ 0.005762] ACPI: Reserving SSDT table memory at [mem 0x63f38000-0x63f3d359]
<6>[ 0.005763] ACPI: Reserving SSDT table memory at [mem 0x63ffd000-0x63ffd60d]
<6>[ 0.005763] ACPI: Reserving TPM2 table memory at [mem 0x63f37000-0x63f3704b]
<6>[ 0.005764] ACPI: Reserving LPIT table memory at [mem 0x63f36000-0x63f360cb]
<6>[ 0.005764] ACPI: Reserving WSMT table memory at [mem 0x63f35000-0x63f35027]
<6>[ 0.005765] ACPI: Reserving SSDT table memory at [mem 0x63f34000-0x63f34ca5]
<6>[ 0.005766] ACPI: Reserving SSDT table memory at [mem 0x63f2e000-0x63f3387c]
<6>[ 0.005766] ACPI: Reserving DBGP table memory at [mem 0x63f2d000-0x63f2d033]
<6>[ 0.005767] ACPI: Reserving DBG2 table memory at [mem 0x63f2c000-0x63f2c053]
<6>[ 0.005767] ACPI: Reserving NHLT table memory at [mem 0x63f2b000-0x63f2b98a]
<6>[ 0.005767] ACPI: Reserving SSDT table memory at [mem 0x63f29000-0x63f2a190]
<6>[ 0.005768] ACPI: Reserving SSDT table memory at [mem 0x63f23000-0x63f28cad]
<6>[ 0.005768] ACPI: Reserving ECDT table memory at [mem 0x63f22000-0x63f22068]
<6>[ 0.005769] ACPI: Reserving DMAR table memory at [mem 0x63f21000-0x63f210a7]
<6>[ 0.005769] ACPI: Reserving FPDT table memory at [mem 0x63f20000-0x63f20043]
<6>[ 0.005770] ACPI: Reserving SSDT table memory at [mem 0x63f1e000-0x63f1f014]
<6>[ 0.005770] ACPI: Reserving SSDT table memory at [mem 0x63f1b000-0x63f1d819]
<6>[ 0.005771] ACPI: Reserving SSDT table memory at [mem 0x63f18000-0x63f1a8d2]
<6>[ 0.005771] ACPI: Reserving SSDT table memory at [mem 0x63f16000-0x63f1719f]
<6>[ 0.005771] ACPI: Reserving ASF! table memory at [mem 0x63f42000-0x63f42073]
<6>[ 0.005772] ACPI: Reserving PHAT table memory at [mem 0x63f14000-0x63f1480f]
<6>[ 0.005773] ACPI: Reserving BGRT table memory at [mem 0x63f13000-0x63f13037]
<6>[ 0.005855] APIC: Switched APIC routing to: cluster x2apic
<6>[ 0.006134] No NUMA configuration found
<6>[ 0.006134] Faking a node at [mem 0x0000000000000000-0x000000087fffffff]
<6>[ 0.006141] NODE_DATA(0) allocated [mem 0x87fb52fc0-0x87fb7dfff]
<6>[ 0.006281] Zone ranges:
<6>[ 0.006282] DMA [mem 0x0000000000001000-0x0000000000ffffff]
<6>[ 0.006283] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
<6>[ 0.006284] Normal [mem 0x0000000100000000-0x000000087fffffff]
<6>[ 0.006285] Device empty
<6>[ 0.006285] Movable zone start for each node
<6>[ 0.006286] Early memory node ranges
<6>[ 0.006286] node 0: [mem 0x0000000000001000-0x000000000009efff]
<6>[ 0.006288] node 0: [mem 0x0000000000100000-0x0000000060a3efff]
<6>[ 0.006288] node 0: [mem 0x0000000063fff000-0x0000000063ffffff]
<6>[ 0.006289] node 0: [mem 0x0000000100000000-0x000000087fffffff]
<6>[ 0.006290] Initmem setup node 0 [mem 0x0000000000001000-0x000000087fffffff]
<6>[ 0.006296] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[ 0.006324] On node 0, zone DMA: 97 pages in unavailable ranges
<6>[ 0.009305] On node 0, zone DMA32: 13760 pages in unavailable ranges
<6>[ 0.051960] On node 0, zone Normal: 16384 pages in unavailable ranges
<6>[ 0.052662] ACPI: PM-Timer IO Port: 0x1808
<4>[ 0.052668] CPU topo: Boot CPU APIC ID not the first enumerated APIC ID: 20 != 10
<4>[ 0.052669] CPU topo: [Firmware Bug]: APIC enumeration order not specification compliant
<6>[ 0.052673] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
<6>[ 0.052721] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
<6>[ 0.052723] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[ 0.052725] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>[ 0.052727] ACPI: Using ACPI (MADT) for SMP configuration information
<6>[ 0.052728] ACPI: HPET id: 0x8086a201 base: 0xfed00000
<7>[ 0.052741] e820: update [mem 0x5bd46000-0x5bd60fff] usable ==> reserved
<6>[ 0.052749] TSC deadline timer available
<6>[ 0.052751] CPU topo: Max. logical packages: 1
<6>[ 0.052751] CPU topo: Max. logical dies: 1
<6>[ 0.052751] CPU topo: Max. dies per package: 1
<6>[ 0.052753] CPU topo: Max. threads per core: 2
<6>[ 0.052754] CPU topo: Num. cores per package: 16
<6>[ 0.052754] CPU topo: Num. threads per package: 22
<6>[ 0.052754] CPU topo: Allowing 22 present CPUs plus 0 hotplug CPUs
<6>[ 0.052770] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[ 0.052772] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
<6>[ 0.052773] PM: hibernation: Registered nosave memory: [mem 0x5bd46000-0x5bd60fff]
<6>[ 0.052774] PM: hibernation: Registered nosave memory: [mem 0x5bda7000-0x5bda7fff]
<6>[ 0.052775] PM: hibernation: Registered nosave memory: [mem 0x60a3f000-0x63db6fff]
<6>[ 0.052776] PM: hibernation: Registered nosave memory: [mem 0x63db7000-0x63edbfff]
<6>[ 0.052776] PM: hibernation: Registered nosave memory: [mem 0x63edc000-0x63ffefff]
<6>[ 0.052777] PM: hibernation: Registered nosave memory: [mem 0x64000000-0x787fffff]
<6>[ 0.052778] PM: hibernation: Registered nosave memory: [mem 0x78800000-0xfed1ffff]
<6>[ 0.052778] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
<6>[ 0.052778] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
<6>[ 0.052781] [mem 0x78800000-0xfed1ffff] available for PCI devices
<6>[ 0.052782] Booting paravirtualized kernel on bare hardware
<6>[ 0.052784] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
<6>[ 0.052795] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:22 nr_cpu_ids:22 nr_node_ids:1
<6>[ 0.054278] percpu: Embedded 91 pages/cpu s249856 r8192 d114688 u524288
<7>[ 0.054283] pcpu-alloc: s249856 r8192 d114688 u524288 alloc=1*2097152
<7>[ 0.054284] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07
<7>[ 0.054287] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15
<7>[ 0.054289] pcpu-alloc: [0] 16 17 18 19 [0] 20 21 -- --
<5>[ 0.054310] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast ro
<5>[ 0.054395] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space.
<5>[ 0.054411] random: crng init done
<6>[ 0.057234] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
<6>[ 0.058633] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
<6>[ 0.058766] Fallback order for Node 0: 0
<6>[ 0.058769] Built 1 zonelists, mobility grouping on. Total pages: 8260062
<6>[ 0.058770] Policy zone: Normal
<6>[ 0.058782] mem auto-init: stack:off, heap alloc:on, heap free:off
<6>[ 0.058783] stackdepot: allocating hash table via alloc_large_system_hash
<6>[ 0.058785] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear)
<6>[ 0.060281] software IO TLB: area num 32.
<4>[ 0.119289] **********************************************************
<4>[ 0.119290] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.119291] ** **
<4>[ 0.119291] ** This system shows unhashed kernel memory addresses **
<4>[ 0.119291] ** via the console, logs, and other interfaces. This **
<4>[ 0.119292] ** might reduce the security of your system. **
<4>[ 0.119292] ** **
<4>[ 0.119292] ** If you see this message and you are not debugging **
<4>[ 0.119292] ** the kernel, report this immediately to your system **
<4>[ 0.119292] ** administrator! **
<4>[ 0.119293] ** **
<4>[ 0.119293] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.119293] **********************************************************
<6>[ 0.120717] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=22, Nodes=1
<6>[ 0.121122] ftrace: allocating 59569 entries in 233 pages
<6>[ 0.148687] ftrace: allocated 233 pages with 5 groups
<6>[ 0.150213] Dynamic Preempt: voluntary
<6>[ 0.151133] Running RCU self tests
<6>[ 0.151133] Running RCU synchronous self tests
<6>[ 0.151134] rcu: Preemptible hierarchical RCU implementation.
<6>[ 0.151135] rcu: RCU lockdep checking is enabled.
<6>[ 0.151135] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=22.
<6>[ 0.151136] Trampoline variant of Tasks RCU enabled.
<6>[ 0.151136] Rude variant of Tasks RCU enabled.
<6>[ 0.151136] Tracing variant of Tasks RCU enabled.
<6>[ 0.151137] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
<6>[ 0.151137] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=22
<6>[ 0.151222] Running RCU synchronous self tests
<6>[ 0.151231] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22.
<6>[ 0.151236] RCU Tasks Rude: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22.
<6>[ 0.151240] RCU Tasks Trace: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22.
<6>[ 0.162573] NR_IRQS: 524544, nr_irqs: 2232, preallocated irqs: 16
<6>[ 0.163099] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[ 0.163454] Console: colour dummy device 80x25
<6>[ 0.163463] printk: legacy console [tty0] enabled
<6>[ 0.164609] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<6>[ 0.164617] ... MAX_LOCKDEP_SUBCLASSES: 8
<6>[ 0.164620] ... MAX_LOCK_DEPTH: 48
<6>[ 0.164624] ... MAX_LOCKDEP_KEYS: 8192
<6>[ 0.164628] ... CLASSHASH_SIZE: 4096
<6>[ 0.164632] ... MAX_LOCKDEP_ENTRIES: 524288
<6>[ 0.164636] ... MAX_LOCKDEP_CHAINS: 524288
<6>[ 0.164640] ... CHAINHASH_SIZE: 262144
<6>[ 0.164644] memory used by lock dependency info: 54145 kB
<6>[ 0.164648] memory used for stack traces: 4224 kB
<6>[ 0.164652] per task-struct memory footprint: 1920 bytes
<6>[ 0.164727] ACPI: Core revision 20240827
<6>[ 0.165729] hpet: HPET dysfunctional in PC10. Force disabled.
<6>[ 0.165788] APIC: Switch to symmetric I/O mode setup
<6>[ 0.165794] DMAR: Host address width 42
<6>[ 0.165797] DMAR: DRHD base: 0x000000fc800000 flags: 0x0
<6>[ 0.165839] DMAR: dmar0: reg_base_addr fc800000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0ef5e
<6>[ 0.165847] DMAR: DRHD base: 0x000000fc801000 flags: 0x1
<6>[ 0.165865] DMAR: dmar1: reg_base_addr fc801000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0efde
<6>[ 0.165873] DMAR: SATC flags: 0x1
<6>[ 0.165885] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc801000 IOMMU 1
<6>[ 0.165890] DMAR-IR: HPET id 0 under DRHD base 0xfc801000
<6>[ 0.165895] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>[ 0.167608] DMAR-IR: Enabled IRQ remapping in x2apic mode
<6>[ 0.171916] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns
<6>[ 0.171936] Calibrating delay loop (skipped), value calculated using timer frequency.. 6758.40 BogoMIPS (lpj=3379200)
<6>[ 0.172000] CPU0: Thermal monitoring enabled (TM1)
<6>[ 0.172006] x86/cpu: User Mode Instruction Prevention (UMIP) activated
<6>[ 0.172208] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
<6>[ 0.172212] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
<6>[ 0.172220] process: using mwait in idle threads
<6>[ 0.172228] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
<6>[ 0.172236] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
<6>[ 0.172240] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
<6>[ 0.172248] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
<6>[ 0.172254] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
<6>[ 0.172271] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
<6>[ 0.172278] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
<6>[ 0.172283] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
<6>[ 0.172287] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
<6>[ 0.172293] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
<6>[ 0.172299] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
<6>[ 0.172304] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
<6>[ 0.172309] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
<6>[ 0.172315] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
<6>[ 0.172930] Freeing SMP alternatives memory: 48K
<6>[ 0.172930] pid_max: default: 32768 minimum: 301
<6>[ 0.172930] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm
<6>[ 0.172930] landlock: Up and running.
<6>[ 0.172930] Yama: becoming mindful.
<6>[ 0.172930] AppArmor: AppArmor initialized
<6>[ 0.172930] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.172930] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.172930] Running RCU synchronous self tests
<6>[ 0.172930] Running RCU synchronous self tests
<6>[ 0.172930] smpboot: CPU0: Intel(R) Core(TM) Ultra 7 1003H (family: 0x6, model: 0xaa, stepping: 0x4)
<6>[ 0.172930] Running RCU Tasks wait API self tests
<6>[ 0.172930] Running RCU Tasks Rude wait API self tests
<6>[ 0.172930] Running RCU Tasks Trace wait API self tests
<6>[ 0.172930] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Meteorlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
<6>[ 0.173171] core: cpu_core PMU driver:
<6>[ 0.173179] ... version: 5
<6>[ 0.173183] ... bit width: 48
<6>[ 0.173187] ... generic registers: 8
<6>[ 0.173190] ... value mask: 0000ffffffffffff
<6>[ 0.173195] ... max period: 00007fffffffffff
<6>[ 0.173199] ... fixed-purpose events: 4
<6>[ 0.173203] ... event mask: 0001000f000000ff
<6>[ 0.173257] signal: max sigframe size: 3632
<6>[ 0.173286] Estimated ratio of average max frequency by base frequency (times 1024): 1445
<6>[ 0.173413] rcu: Hierarchical SRCU implementation.
<6>[ 0.173418] rcu: Max phase no-delay instances is 400.
<6>[ 0.173588] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level
<6>[ 0.176260] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
<6>[ 0.177080] smp: Bringing up secondary CPUs ...
<6>[ 0.179227] smpboot: x86: Booting SMP configuration:
<6>[ 0.179235] .... node #0, CPUs: #1
<6>[ 0.179314] Callback from call_rcu_tasks_trace() invoked.
<4>[ 0.182071] #3 #6 #8 #10 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21
<6>[ 0.009687] core: cpu_atom PMU driver:
<6>[ 0.009687] ... version: 5
<6>[ 0.009687] ... bit width: 48
<6>[ 0.009687] ... generic registers: 8
<6>[ 0.009687] ... value mask: 0000ffffffffffff
<6>[ 0.009687] ... max period: 00007fffffffffff
<6>[ 0.009687] ... fixed-purpose events: 3
<6>[ 0.009687] ... event mask: 00000007000000ff
<4>[ 0.211046] #2 #4 #5 #7 #9 #11
<6>[ 0.223976] smp: Brought up 1 node, 22 CPUs
<6>[ 0.223992] smpboot: Total of 22 processors activated (148684.80 BogoMIPS)
<6>[ 0.227000] Memory: 32228096K/33040248K available (24298K kernel code, 5580K rwdata, 9252K rodata, 5628K init, 68404K bss, 778304K reserved, 0K cma-reserved)
<6>[ 0.231216] devtmpfs: initialized
<6>[ 0.231328] x86/mm: Memory block size: 128MB
<6>[ 0.250086] ACPI: PM: Registering ACPI NVS region [mem 0x63db7000-0x63edbfff] (1200128 bytes)
<6>[ 0.250603] Running RCU synchronous self tests
<6>[ 0.250621] Running RCU synchronous self tests
<6>[ 0.250935] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[ 0.251037] futex hash table entries: 8192 (order: 8, 1048576 bytes, linear)
<6>[ 0.251495] pinctrl core: initialized pinctrl subsystem
<6>[ 0.252255] PM: RTC time: 14:26:25, date: 2025-04-03
<6>[ 0.253146] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[ 0.254220] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
<6>[ 0.254622] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[ 0.255031] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[ 0.255091] audit: initializing netlink subsys (disabled)
<5>[ 0.255124] audit: type=2000 audit(1743690385.083:1): state=initialized audit_enabled=0 res=1
<6>[ 0.255661] thermal_sys: Registered thermal governor 'fair_share'
<6>[ 0.255663] thermal_sys: Registered thermal governor 'bang_bang'
<6>[ 0.255669] thermal_sys: Registered thermal governor 'step_wise'
<6>[ 0.255677] thermal_sys: Registered thermal governor 'user_space'
<6>[ 0.256023] thermal_sys: Registered thermal governor 'power_allocator'
<6>[ 0.256075] EISA bus registered
<6>[ 0.256107] cpuidle: using governor ladder
<6>[ 0.256107] cpuidle: using governor menu
<6>[ 0.256107] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[ 0.256461] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
<6>[ 0.256954] PCI: Using configuration type 1 for base access
<6>[ 0.257107] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
<6>[ 0.258035] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
<6>[ 0.258035] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
<6>[ 0.258035] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
<6>[ 0.258035] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
<6>[ 0.276931] raid6: avx2x4 gen() 57442 MB/s
<6>[ 0.293930] raid6: avx2x2 gen() 59484 MB/s
<6>[ 0.310930] raid6: avx2x1 gen() 57884 MB/s
<6>[ 0.310935] raid6: using algorithm avx2x2 gen() 59484 MB/s
<6>[ 0.327930] raid6: .... xor() 42489 MB/s, rmw enabled
<6>[ 0.327936] raid6: using avx2x2 recovery algorithm
<6>[ 0.328435] fbcon: Taking over console
<6>[ 0.328620] ACPI: Added _OSI(Module Device)
<6>[ 0.328624] ACPI: Added _OSI(Processor Device)
<6>[ 0.328628] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[ 0.328633] ACPI: Added _OSI(Processor Aggregator Device)
<6>[ 1.073495] ACPI: 28 ACPI AML tables successfully acquired and loaded
<6>[ 1.086301] ACPI: EC: EC started
<6>[ 1.086314] ACPI: EC: interrupt blocked
<6>[ 1.089432] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 1.089438] ACPI: EC: Boot ECDT EC used to handle transactions
<6>[ 1.204941] Callback from call_rcu_tasks() invoked.
<6>[ 1.364696] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.364706] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.435643] ACPI: Interpreter enabled
<6>[ 1.435840] ACPI: PM: (supports S0 S4 S5)
<6>[ 1.435849] ACPI: Using IOAPIC for interrupt routing
<6>[ 1.447476] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[ 1.447493] PCI: Ignoring E820 reservations for host bridge windows
<6>[ 1.498433] ACPI: Enabled 10 GPEs in block 00 to 7F
<6>[ 1.498472] ACPI: Enabled 8 GPEs in block 80 to DF
<6>[ 1.599689] ACPI: \_SB_.PC00.PAUD: New power resource
<6>[ 1.898930] ACPI: \_SB_.PC00.RP01.PXP_: New power resource
<6>[ 1.918111] ACPI: \_SB_.PC00.RP06.PXP_: New power resource
<6>[ 1.925932] ACPI: \_SB_.PC00.RP07.PXP_: New power resource
<6>[ 1.940707] ACPI: \_SB_.PC00.RP09.PXP_: New power resource
<6>[ 1.947278] ACPI: \_SB_.PC00.RP10.PXP_: New power resource
<6>[ 1.954296] ACPI: \_SB_.PC00.RP11.PXP_: New power resource
<6>[ 1.962028] ACPI: \_SB_.PC00.RP12.PXP_: New power resource
<6>[ 2.151964] ACPI: \_SB_.PC00.TBT0: New power resource
<6>[ 2.152301] ACPI: \_SB_.PC00.TBT1: New power resource
<6>[ 2.152610] ACPI: \_SB_.PC00.D3C_: New power resource
<6>[ 2.268795] ACPI: \_TZ_.FN00: New power resource
<6>[ 2.269823] ACPI: \_TZ_.FN01: New power resource
<6>[ 2.270802] ACPI: \_TZ_.FN02: New power resource
<6>[ 2.271335] ACPI: \_TZ_.FN03: New power resource
<6>[ 2.271930] ACPI: \_TZ_.FN04: New power resource
<6>[ 2.277665] ACPI: \PIN_: New power resource
<6>[ 2.283195] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
<6>[ 2.283226] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
<6>[ 2.287481] acpi PNP0A08:00: _OSC: platform does not support [AER]
<6>[ 2.295512] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME PCIeCapability LTR DPC]
<6>[ 2.318256] PCI host bridge to bus 0000:00
<6>[ 2.318317] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
<6>[ 2.318334] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
<6>[ 2.318348] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[ 2.318364] pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff window]
<6>[ 2.318380] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x3ffbfffffff window]
<6>[ 2.318398] pci_bus 0000:00: root bus resource [bus 00-fe]
<6>[ 2.330662] pci 0000:00:00.0: [8086:7d01] type 00 class 0x060000 conventional PCI endpoint
<6>[ 2.331299] pci 0000:00:02.0: [8086:7d55] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
<6>[ 2.331335] pci 0000:00:02.0: BAR 0 [mem 0x5018000000-0x5018ffffff 64bit pref]
<6>[ 2.331343] pci 0000:00:02.0: BAR 2 [mem 0x4000000000-0x400fffffff 64bit pref]
<6>[ 2.331379] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics
<6>[ 2.331387] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6>[ 2.331434] pci 0000:00:02.0: PME# supported from D0 D3hot
<6>[ 2.331471] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x00ffffff 64bit pref]
<6>[ 2.331477] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x06ffffff 64bit pref]: contains BAR 0 for 7 VFs
<6>[ 2.332901] pci 0000:00:04.0: [8086:7d03] type 00 class 0x118000 conventional PCI endpoint
<6>[ 2.332944] pci 0000:00:04.0: BAR 0 [mem 0x501a280000-0x501a29ffff 64bit]
<6>[ 2.334310] pci 0000:00:05.0: [8086:7d19] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint
<6>[ 2.334337] pci 0000:00:05.0: BAR 0 [mem 0x5019000000-0x5019ffffff 64bit]
<6>[ 2.334349] pci 0000:00:05.0: enabling Extended Tags
<6>[ 2.335443] pci 0000:00:06.0: [8086:7ecb] type 01 class 0x060400 PCIe Root Port
<6>[ 2.335568] pci 0000:00:06.0: PCI bridge to [bus 01]
<6>[ 2.335647] pci 0000:00:06.0: bridge window [mem 0x8c000000-0x8c0fffff]
<6>[ 2.335988] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
<6>[ 2.336125] pci 0000:00:06.0: PTM enabled (root), 4ns granularity
<6>[ 2.343116] pci 0000:00:07.0: [8086:7ec6] type 01 class 0x060400 PCIe Root Port
<6>[ 2.343147] pci 0000:00:07.0: PCI bridge to [bus 02-2b]
<6>[ 2.343157] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff]
<6>[ 2.343171] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref]
<6>[ 2.343268] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<6>[ 2.343312] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
<6>[ 2.348560] pci 0000:00:07.3: [8086:7ec7] type 01 class 0x060400 PCIe Root Port
<6>[ 2.348598] pci 0000:00:07.3: PCI bridge to [bus 2c-55]
<6>[ 2.348607] pci 0000:00:07.3: bridge window [mem 0x80000000-0x85ffffff]
<6>[ 2.348621] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref]
<6>[ 2.348716] pci 0000:00:07.3: PME# supported from D0 D3hot D3cold
<6>[ 2.348754] pci 0000:00:07.3: PTM enabled (root), 4ns granularity
<6>[ 2.353713] pci 0000:00:08.0: [8086:7e4c] type 00 class 0x088000 conventional PCI endpoint
<6>[ 2.353757] pci 0000:00:08.0: BAR 0 [mem 0x501a2e3000-0x501a2e3fff 64bit]
<6>[ 2.354166] pci 0000:00:0a.0: [8086:7d0d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
<6>[ 2.354193] pci 0000:00:0a.0: BAR 0 [mem 0x501a240000-0x501a27ffff 64bit]
<6>[ 2.354204] pci 0000:00:0a.0: enabling Extended Tags
<6>[ 2.354392] pci 0000:00:0b.0: [8086:7d1d] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint
<6>[ 2.354422] pci 0000:00:0b.0: BAR 0 [mem 0x5010000000-0x5017ffffff 64bit]
<6>[ 2.354430] pci 0000:00:0b.0: BAR 4 [mem 0x501a2e2000-0x501a2e2fff 64bit]
<6>[ 2.354869] pci 0000:00:0d.0: [8086:7ec0] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 2.354931] pci 0000:00:0d.0: BAR 0 [mem 0x501a2c0000-0x501a2cffff 64bit]
<6>[ 2.354999] pci 0000:00:0d.0: PME# supported from D3hot D3cold
<6>[ 2.356848] pci 0000:00:0d.3: [8086:7ec3] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 2.356947] pci 0000:00:0d.3: BAR 0 [mem 0x501a200000-0x501a23ffff 64bit]
<6>[ 2.356955] pci 0000:00:0d.3: BAR 2 [mem 0x501a2e1000-0x501a2e1fff 64bit]
<6>[ 2.357368] pci 0000:00:0d.3: supports D1 D2
<6>[ 2.357373] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.358815] pci 0000:00:12.0: [8086:7e45] type 00 class 0x070000 conventional PCI endpoint
<6>[ 2.358854] pci 0000:00:12.0: BAR 0 [mem 0x501a2b0000-0x501a2bffff 64bit]
<6>[ 2.358905] pci 0000:00:12.0: PME# supported from D0 D3hot
<6>[ 2.361951] pci 0000:00:14.0: [8086:7e7d] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 2.361992] pci 0000:00:14.0: BAR 0 [mem 0x501a2a0000-0x501a2affff 64bit]
<6>[ 2.362044] pci 0000:00:14.0: PME# supported from D3hot D3cold
<6>[ 2.364457] pci 0000:00:14.2: [8086:7e7f] type 00 class 0x050000 conventional PCI endpoint
<6>[ 2.364505] pci 0000:00:14.2: BAR 0 [mem 0x501a2d4000-0x501a2d7fff 64bit]
<6>[ 2.364513] pci 0000:00:14.2: BAR 2 [mem 0x501a2e0000-0x501a2e0fff 64bit]
<6>[ 2.364800] pci 0000:00:15.0: [8086:7e78] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.364880] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.366361] pci 0000:00:15.1: [8086:7e79] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.366439] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.367901] pci 0000:00:15.2: [8086:7e7a] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.368026] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.369693] pci 0000:00:15.3: [8086:7e7b] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.369775] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.371223] pci 0000:00:16.0: [8086:7e70] type 00 class 0x078000 conventional PCI endpoint
<6>[ 2.371276] pci 0000:00:16.0: BAR 0 [mem 0x501a2db000-0x501a2dbfff 64bit]
<6>[ 2.371339] pci 0000:00:16.0: PME# supported from D3hot
<6>[ 2.374359] pci 0000:00:16.3: [8086:7e73] type 00 class 0x070002 conventional PCI endpoint
<6>[ 2.374401] pci 0000:00:16.3: BAR 0 [io 0x3020-0x3027]
<6>[ 2.374407] pci 0000:00:16.3: BAR 1 [mem 0x8c121000-0x8c121fff]
<6>[ 2.374699] pci 0000:00:19.0: [8086:7e50] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.374784] pci 0000:00:19.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.375383] pci 0000:00:19.1: [8086:7e51] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.375462] pci 0000:00:19.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.377166] pci 0000:00:1f.0: [8086:7e02] type 00 class 0x060100 conventional PCI endpoint
<6>[ 2.378615] pci 0000:00:1f.3: [8086:7e28] type 00 class 0x040100 conventional PCI endpoint
<6>[ 2.378730] pci 0000:00:1f.3: BAR 0 [mem 0x501a2d0000-0x501a2d3fff 64bit]
<6>[ 2.378745] pci 0000:00:1f.3: BAR 4 [mem 0x501a000000-0x501a1fffff 64bit]
<6>[ 2.378856] pci 0000:00:1f.3: PME# supported from D3hot D3cold
<6>[ 2.379266] pci 0000:00:1f.4: [8086:7e22] type 00 class 0x0c0500 conventional PCI endpoint
<6>[ 2.379317] pci 0000:00:1f.4: BAR 0 [mem 0x501a2d8000-0x501a2d80ff 64bit]
<6>[ 2.379327] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf]
<6>[ 2.380960] pci 0000:00:1f.5: [8086:7e23] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.381060] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
<6>[ 2.381266] pci 0000:00:1f.6: [8086:550a] type 00 class 0x020000 conventional PCI endpoint
<6>[ 2.381346] pci 0000:00:1f.6: BAR 0 [mem 0x8c100000-0x8c11ffff]
<6>[ 2.381427] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
<6>[ 2.381930] pci 0000:01:00.0: [2646:2263] type 00 class 0x010802 PCIe Endpoint
<6>[ 2.381930] pci 0000:01:00.0: BAR 0 [mem 0x8c000000-0x8c003fff 64bit]
<6>[ 2.383676] pci 0000:00:06.0: PCI bridge to [bus 01]
<6>[ 2.383857] pci 0000:00:07.0: PCI bridge to [bus 02-2b]
<6>[ 2.384022] pci 0000:00:07.3: PCI bridge to [bus 2c-55]
<6>[ 2.804169] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1)
<6>[ 7.480668] Low-power S0 idle used by default for system suspend
<6>[ 7.620396] ACPI: EC: interrupt unblocked
<6>[ 7.620408] ACPI: EC: event unblocked
<6>[ 7.620444] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 7.620451] ACPI: EC: GPE=0x6e
<6>[ 7.620458] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete
<6>[ 7.620468] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
<6>[ 7.622055] iommu: Default domain type: Translated
<6>[ 7.622055] iommu: DMA domain TLB invalidation policy: lazy mode
<5>[ 7.624397] SCSI subsystem initialized
<7>[ 7.624466] libata version 3.00 loaded.
<6>[ 7.624466] ACPI: bus type USB registered
<6>[ 7.624466] usbcore: registered new interface driver usbfs
<6>[ 7.624466] usbcore: registered new interface driver hub
<6>[ 7.624466] usbcore: registered new device driver usb
<6>[ 7.625213] pps_core: LinuxPPS API ver. 1 registered
<6>[ 7.625218] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[ 7.625241] PTP clock support registered
<6>[ 7.625331] EDAC MC: Ver: 3.0.0
<6>[ 7.626157] efivars: Registered efivars operations
<6>[ 7.628087] NetLabel: Initializing
<6>[ 7.628093] NetLabel: domain hash size = 128
<6>[ 7.628097] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
<6>[ 7.628175] NetLabel: unlabeled traffic allowed by default
<6>[ 7.628191] mctp: management component transport protocol core
<6>[ 7.628196] NET: Registered PF_MCTP protocol family
<6>[ 7.628244] PCI: Using ACPI for IRQ routing
<7>[ 7.641641] PCI: pci_cache_line_size set to 64 bytes
<6>[ 7.641896] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
<7>[ 7.642283] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
<7>[ 7.642292] e820: reserve RAM buffer [mem 0x5bd46000-0x5bffffff]
<7>[ 7.642295] e820: reserve RAM buffer [mem 0x5bda7000-0x5bffffff]
<7>[ 7.642297] e820: reserve RAM buffer [mem 0x60a3f000-0x63ffffff]
<6>[ 7.642541] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6>[ 7.642541] pci 0000:00:02.0: vgaarb: bridge control possible
<6>[ 7.642541] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
<6>[ 7.642541] vgaarb: loaded
<6>[ 7.643197] clocksource: Switched to clocksource tsc-early
<5>[ 7.651342] VFS: Disk quotas dquot_6.6.0
<6>[ 7.651371] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[ 7.652415] AppArmor: AppArmor Filesystem Enabled
<6>[ 7.652606] pnp: PnP ACPI init
<6>[ 7.653619] system 00:00: [io 0x0680-0x069f] has been reserved
<6>[ 7.653631] system 00:00: [io 0x164e-0x164f] has been reserved
<6>[ 7.654240] system 00:01: [io 0x1854-0x1857] has been reserved
<6>[ 7.655594] system 00:03: [io 0x06a4] has been reserved
<6>[ 7.655603] system 00:03: [io 0x06a0] has been reserved
<4>[ 7.676505] pnp 00:04: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref]
<4>[ 7.676518] pnp 00:04: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref]
<6>[ 7.676662] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved
<6>[ 7.676673] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved
<6>[ 7.676686] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved
<6>[ 7.676702] system 00:04: [mem 0xfc800000-0xfc81ffff] could not be reserved
<6>[ 7.676712] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved
<6>[ 7.676721] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved
<6>[ 7.682796] system 00:05: [io 0x2000-0x20fe] has been reserved
<4>[ 7.683858] pnp 00:07: disabling [mem 0x00000000-0x0009cfff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref]
<6>[ 7.686638] pnp: PnP ACPI: found 8 devices
<6>[ 7.698509] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<6>[ 7.698954] NET: Registered PF_INET protocol family
<6>[ 7.699260] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 7.703191] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear)
<6>[ 7.703421] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[ 7.703739] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 7.705015] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage)
<6>[ 7.706580] TCP: Hash tables configured (established 262144 bind 65536)
<6>[ 7.707381] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 7.708484] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 7.709680] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[ 7.709776] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2
<6>[ 7.709832] pci 0000:00:02.0: VF BAR 0 [mem 0x501b000000-0x5021ffffff 64bit pref]: assigned
<6>[ 7.709853] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned
<6>[ 7.709865] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff]: assigned
<6>[ 7.709877] pci 0000:00:15.0: BAR 0 [mem 0x501a2d9000-0x501a2d9fff 64bit]: assigned
<6>[ 7.709929] pci 0000:00:15.1: BAR 0 [mem 0x501a2da000-0x501a2dafff 64bit]: assigned
<6>[ 7.709981] pci 0000:00:15.2: BAR 0 [mem 0x501a2dc000-0x501a2dcfff 64bit]: assigned
<6>[ 7.710032] pci 0000:00:15.3: BAR 0 [mem 0x501a2dd000-0x501a2ddfff 64bit]: assigned
<6>[ 7.710084] pci 0000:00:19.0: BAR 0 [mem 0x501a2de000-0x501a2defff 64bit]: assigned
<6>[ 7.710135] pci 0000:00:19.1: BAR 0 [mem 0x501a2df000-0x501a2dffff 64bit]: assigned
<6>[ 7.710185] pci 0000:00:1f.5: BAR 0 [mem 0x8c120000-0x8c120fff]: assigned
<6>[ 7.710220] pci 0000:00:06.0: PCI bridge to [bus 01]
<6>[ 7.710316] pci 0000:00:06.0: bridge window [mem 0x8c000000-0x8c0fffff]
<6>[ 7.710406] pci 0000:00:07.0: PCI bridge to [bus 02-2b]
<6>[ 7.710424] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]
<6>[ 7.710438] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff]
<6>[ 7.710451] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref]
<6>[ 7.710473] pci 0000:00:07.3: PCI bridge to [bus 2c-55]
<6>[ 7.710483] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff]
<6>[ 7.710496] pci 0000:00:07.3: bridge window [mem 0x80000000-0x85ffffff]
<6>[ 7.710509] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref]
<6>[ 7.710527] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
<6>[ 7.710538] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
<6>[ 7.710548] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[ 7.710559] pci_bus 0000:00: resource 7 [mem 0x80000000-0xbfffffff window]
<6>[ 7.710571] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x3ffbfffffff window]
<6>[ 7.710583] pci_bus 0000:01: resource 1 [mem 0x8c000000-0x8c0fffff]
<6>[ 7.710594] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
<6>[ 7.710603] pci_bus 0000:02: resource 1 [mem 0x86000000-0x8bffffff]
<6>[ 7.710614] pci_bus 0000:02: resource 2 [mem 0x4010000000-0x480fffffff 64bit pref]
<6>[ 7.710626] pci_bus 0000:2c: resource 0 [io 0x5000-0x5fff]
<6>[ 7.710636] pci_bus 0000:2c: resource 1 [mem 0x80000000-0x85ffffff]
<6>[ 7.710646] pci_bus 0000:2c: resource 2 [mem 0x4810000000-0x500fffffff 64bit pref]
<6>[ 7.712900] pci 0000:00:0d.0: enabling device (0000 -> 0002)
<6>[ 7.716225] PCI: CLS 0 bytes, default 64
<6>[ 7.716364] DMAR: No RMRR found
<6>[ 7.716380] DMAR: No ATSR found
<6>[ 7.716387] DMAR: dmar0: Using Queued invalidation
<6>[ 7.716421] DMAR: dmar1: Using Queued invalidation
<6>[ 7.717765] pci 0000:00:02.0: Adding to iommu group 0
<6>[ 7.719817] pci 0000:00:00.0: Adding to iommu group 1
<6>[ 7.719917] pci 0000:00:04.0: Adding to iommu group 2
<6>[ 7.720010] pci 0000:00:05.0: Adding to iommu group 3
<6>[ 7.720120] pci 0000:00:06.0: Adding to iommu group 4
<6>[ 7.720228] pci 0000:00:07.0: Adding to iommu group 5
<6>[ 7.720356] pci 0000:00:07.3: Adding to iommu group 6
<6>[ 7.720443] pci 0000:00:08.0: Adding to iommu group 7
<6>[ 7.720526] pci 0000:00:0a.0: Adding to iommu group 8
<6>[ 7.720615] pci 0000:00:0b.0: Adding to iommu group 9
<6>[ 7.720738] pci 0000:00:0d.0: Adding to iommu group 10
<6>[ 7.720803] pci 0000:00:0d.3: Adding to iommu group 10
<6>[ 7.720904] pci 0000:00:12.0: Adding to iommu group 11
<6>[ 7.721011] pci 0000:00:14.0: Adding to iommu group 12
<6>[ 7.721079] pci 0000:00:14.2: Adding to iommu group 12
<6>[ 7.721223] pci 0000:00:15.0: Adding to iommu group 13
<6>[ 7.721293] pci 0000:00:15.1: Adding to iommu group 13
<6>[ 7.721359] pci 0000:00:15.2: Adding to iommu group 13
<6>[ 7.721424] pci 0000:00:15.3: Adding to iommu group 13
<6>[ 7.721541] pci 0000:00:16.0: Adding to iommu group 14
<6>[ 7.721608] pci 0000:00:16.3: Adding to iommu group 14
<6>[ 7.721732] pci 0000:00:19.0: Adding to iommu group 15
<6>[ 7.721800] pci 0000:00:19.1: Adding to iommu group 15
<6>[ 7.721958] pci 0000:00:1f.0: Adding to iommu group 16
<6>[ 7.722031] pci 0000:00:1f.3: Adding to iommu group 16
<6>[ 7.722103] pci 0000:00:1f.4: Adding to iommu group 16
<6>[ 7.722179] pci 0000:00:1f.5: Adding to iommu group 16
<6>[ 7.722247] pci 0000:00:1f.6: Adding to iommu group 16
<6>[ 7.722359] pci 0000:01:00.0: Adding to iommu group 17
<6>[ 7.748268] DMAR: Intel(R) Virtualization Technology for Directed I/O
<6>[ 7.748282] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[ 7.748293] software IO TLB: mapped [mem 0x0000000056deb000-0x000000005adeb000] (64MB)
<6>[ 7.749915] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns
<6>[ 7.750004] clocksource: Switched to clocksource tsc
<6>[ 7.750180] platform rtc_cmos: registered platform RTC device (no PNP device found)
<5>[ 7.757871] Initialise system trusted keyrings
<5>[ 7.757971] Key type blacklist registered
<6>[ 7.758227] workingset: timestamp_bits=36 max_order=23 bucket_order=0
<6>[ 7.770250] zbud: loaded
<6>[ 7.771861] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 7.772002] ntfs3: Enabled Linux POSIX ACLs support
<6>[ 7.772012] ntfs3: Read-only LZX/Xpress compression included
<5>[ 7.772498] integrity: Platform Keyring initialized
<5>[ 7.772527] integrity: Machine keyring initialized
<6>[ 7.780976] xor: automatically using best checksumming function avx
<5>[ 7.780990] Key type asymmetric registered
<5>[ 7.781006] Asymmetric key parser 'x509' registered
<6>[ 7.781152] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
<6>[ 7.781470] io scheduler mq-deadline registered
<6>[ 7.782797] ledtrig-cpu: registered to indicate activity on CPUs
<6>[ 7.785854] pcieport 0000:00:06.0: PME: Signaling with IRQ 122
<6>[ 7.788380] pcieport 0000:00:07.0: PME: Signaling with IRQ 123
<6>[ 7.790237] pcieport 0000:00:07.3: PME: Signaling with IRQ 124
<6>[ 7.790574] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<6>[ 7.798678] ACPI: AC: AC Adapter [ADP1] (on-line)
<6>[ 7.799066] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:00/PNP0C0D:00/input/input0
<6>[ 7.799402] ACPI: button: Lid Switch [LID0]
<6>[ 7.799734] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
<6>[ 7.799921] ACPI: button: Sleep Button [SLPB]
<6>[ 7.800161] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
<6>[ 7.800338] ACPI: button: Power Button [PWRB]
<6>[ 7.907076] thermal LNXTHERM:00: registered as thermal_zone0
<6>[ 7.907090] ACPI: thermal: Thermal Zone [TZ00] (39 C)
<6>[ 7.908629] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[ 7.908677] ACPI: battery: Slot [BAT1] (battery absent)
<6>[ 7.910213] ACPI: battery: Slot [BAT0] (battery present)
<6>[ 7.931600] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
<6>[ 7.947755] serial 0000:00:12.0: enabling device (0000 -> 0002)
<6>[ 7.950488] serial 0000:00:16.3: enabling device (0001 -> 0003)
<6>[ 7.974499] 0000:00:16.3: ttyS4 at I/O 0x3020 (irq = 19, base_baud = 115200) is a 16550A
<4>[ 7.976555] hpet_acpi_add: no address or irqs in _CRS
<6>[ 7.976670] Linux agpgart interface v0.103
<6>[ 8.004925] ACPI: bus type drm_connector registered
<6>[ 8.033315] loop: module loaded
<6>[ 8.089727] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
<6>[ 8.233810] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
<6>[ 8.330889] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
<6>[ 8.430764] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
<6>[ 8.562716] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002)
<6>[ 8.677701] intel-lpss 0000:00:19.1: enabling device (0000 -> 0002)
<5>[ 8.798832] Key type psk registered
<6>[ 8.801527] nvme 0000:01:00.0: platform quirk: setting simple suspend
<6>[ 8.802471] tun: Universal TUN/TAP device driver, 1.6
<6>[ 8.802483] nvme nvme0: pci function 0000:01:00.0
<6>[ 8.803404] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 8.803538] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
<6>[ 8.805653] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 8.808285] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 8.808314] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
<6>[ 8.808337] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 8.808811] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 8.808846] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 8.808859] usb usb1: Product: xHCI Host Controller
<6>[ 8.808868] usb usb1: Manufacturer: Linux 6.14.0-CI_DRM_16367-g71dac8dae6cc+ xhci-hcd
<6>[ 8.808881] usb usb1: SerialNumber: 0000:00:0d.0
<4>[ 8.808915] nvme nvme0: missing or invalid SUBNQN field.
<6>[ 8.811122] hub 1-0:1.0: USB hub found
<6>[ 8.811219] hub 1-0:1.0: 1 port detected
<6>[ 8.815759] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 8.815777] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 8.815790] usb usb2: Product: xHCI Host Controller
<6>[ 8.815798] usb usb2: Manufacturer: Linux 6.14.0-CI_DRM_16367-g71dac8dae6cc+ xhci-hcd
<6>[ 8.815811] usb usb2: SerialNumber: 0000:00:0d.0
<6>[ 8.816562] hub 2-0:1.0: USB hub found
<6>[ 8.816618] hub 2-0:1.0: 4 ports detected
<6>[ 8.822632] nvme nvme0: 15/0/0 default/read/poll queues
<6>[ 8.834337] nvme0n1: p1 p2
<6>[ 8.851250] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 8.851285] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
<6>[ 8.853159] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 8.854888] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 8.854917] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
<6>[ 8.854938] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 8.855184] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 8.855200] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 8.855212] usb usb3: Product: xHCI Host Controller
<6>[ 8.855221] usb usb3: Manufacturer: Linux 6.14.0-CI_DRM_16367-g71dac8dae6cc+ xhci-hcd
<6>[ 8.855234] usb usb3: SerialNumber: 0000:00:14.0
<6>[ 8.855939] hub 3-0:1.0: USB hub found
<6>[ 8.856003] hub 3-0:1.0: 12 ports detected
<6>[ 8.896979] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 8.896996] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 8.897009] usb usb4: Product: xHCI Host Controller
<6>[ 8.897018] usb usb4: Manufacturer: Linux 6.14.0-CI_DRM_16367-g71dac8dae6cc+ xhci-hcd
<6>[ 8.897031] usb usb4: SerialNumber: 0000:00:14.0
<6>[ 8.897666] hub 4-0:1.0: USB hub found
<6>[ 8.898583] hub 4-0:1.0: 2 ports detected
<6>[ 8.904222] usbcore: registered new interface driver usb-storage
<6>[ 8.904388] usbcore: registered new interface driver usbserial_generic
<6>[ 8.904475] usbserial: USB Serial support registered for generic
<6>[ 8.904534] usbcore: registered new interface driver ftdi_sio
<6>[ 8.904579] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[ 8.904642] usbcore: registered new interface driver pl2303
<6>[ 8.904682] usbserial: USB Serial support registered for pl2303
<6>[ 8.904831] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>[ 8.904843] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<3>[ 9.605712] i8042: Can't read CTR while initializing i8042
<3>[ 9.605724] i8042 i8042: probe with driver i8042 failed with error -5
<6>[ 9.606250] mousedev: PS/2 mouse device common for all mice
<6>[ 9.607319] rtc_cmos rtc_cmos: RTC can wake from S4
<6>[ 9.608955] rtc_cmos rtc_cmos: registered as rtc0
<6>[ 9.609126] rtc_cmos rtc_cmos: setting system clock to 2025-04-03T14:26:34 UTC (1743690394)
<6>[ 9.609295] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
<6>[ 9.609352] i2c_dev: i2c /dev entries driver
<6>[ 9.613898] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0)
<6>[ 9.613915] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
<4>[ 9.613928] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
<6>[ 9.613976] device-mapper: uevent: version 1.0.3
<6>[ 9.614341] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
<6>[ 9.614476] platform eisa.0: Probing EISA bus 0
<4>[ 9.614491] platform eisa.0: EISA: Cannot allocate resource for mainboard
<4>[ 9.614508] platform eisa.0: Cannot allocate resource for EISA slot 1
<4>[ 9.614524] platform eisa.0: Cannot allocate resource for EISA slot 2
<4>[ 9.614539] platform eisa.0: Cannot allocate resource for EISA slot 3
<4>[ 9.614554] platform eisa.0: Cannot allocate resource for EISA slot 4
<4>[ 9.614568] platform eisa.0: Cannot allocate resource for EISA slot 5
<4>[ 9.614583] platform eisa.0: Cannot allocate resource for EISA slot 6
<4>[ 9.614598] platform eisa.0: Cannot allocate resource for EISA slot 7
<4>[ 9.614612] platform eisa.0: Cannot allocate resource for EISA slot 8
<6>[ 9.614624] platform eisa.0: EISA: Detected 0 cards
<6>[ 9.614636] intel_pstate: Intel P-state driver initializing
<6>[ 9.625733] intel_pstate: HWP enabled
<6>[ 9.625740] sdhci: Secure Digital Host Controller Interface driver
<6>[ 9.625745] sdhci: Copyright(c) Pierre Ossman
<6>[ 9.625832] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 9.628337] drop_monitor: Initializing network drop monitor service
<6>[ 9.628546] NET: Registered PF_INET6 protocol family
<6>[ 9.631259] Segment Routing with IPv6
<6>[ 9.631301] In-situ OAM (IOAM) with IPv6
<6>[ 9.631345] NET: Registered PF_PACKET protocol family
<5>[ 9.631467] Key type dns_resolver registered
<4>[ 9.643545] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<6>[ 9.644918] microcode: Current revision: 0x0000001c
<6>[ 9.646742] IPI shorthand broadcast: enabled
<6>[ 9.657554] sched_clock: Marking stable (9648001240, 8687345)->(9743242791, -86554206)
<6>[ 9.658989] registered taskstats version 1
<5>[ 9.662632] Loading compiled-in X.509 certificates
<6>[ 9.693976] Demotion targets for Node 0: null
<6>[ 9.694266] kmemleak: Kernel memory leak detector initialized (mem pool available: 14933)
<6>[ 9.694278] kmemleak: Automatic memory scanning thread started
<5>[ 9.694531] Key type .fscrypt registered
<5>[ 9.694537] Key type fscrypt-provisioning registered
<6>[ 9.697708] Btrfs loaded, zoned=yes, fsverity=yes
<5>[ 9.697830] Key type trusted registered
<5>[ 9.701720] Key type encrypted registered
<6>[ 9.701729] AppArmor: AppArmor sha256 policy hashing enabled
<5>[ 9.701878] Loading compiled-in module X.509 certificates
<5>[ 9.702589] Loaded X.509 cert 'Build time autogenerated kernel key: 6424b45029a378180ab0081e9a105922a9dc35ac'
<6>[ 9.702600] ima: Allocated hash algorithm: sha256
<6>[ 9.743043] ima: No architecture policies found
<6>[ 9.743173] evm: Initialising EVM extended attributes:
<6>[ 9.743179] evm: security.selinux
<6>[ 9.743183] evm: security.SMACK64
<6>[ 9.743187] evm: security.SMACK64EXEC
<6>[ 9.743191] evm: security.SMACK64TRANSMUTE
<6>[ 9.743195] evm: security.SMACK64MMAP
<6>[ 9.743199] evm: security.apparmor
<6>[ 9.743202] evm: security.ima
<6>[ 9.743206] evm: security.capability
<6>[ 9.743209] evm: HMAC attrs: 0x1
<6>[ 9.745490] PM: Magic number: 5:72:434
<6>[ 9.745538] thermal cooling_device26: hash matches
<6>[ 9.745796] printk: legacy console [netcon0] enabled
<6>[ 9.745803] netconsole: network logging started
<6>[ 9.746454] RAS: Correctable Errors collector initialized.
<6>[ 9.746622] clk: Disabling unused clocks
<6>[ 9.746634] PM: genpd: Disabling unused power domains
<6>[ 9.747372] md: Waiting for all devices to be available before autodetect
<6>[ 9.747378] md: If you don't use raid, use raid=noautodetect
<6>[ 9.747383] md: Autodetecting RAID arrays.
<6>[ 9.747390] md: autorun ...
<6>[ 9.747393] md: ... autorun DONE.
<6>[ 9.768581] EXT4-fs (nvme0n1p2): mounted filesystem 8b63c25a-3023-4306-9b91-4e52c14811e3 ro with ordered data mode. Quota mode: none.
<6>[ 9.768642] VFS: Mounted root (ext4 filesystem) readonly on device 259:2.
<6>[ 9.769078] devtmpfs: mounted
<6>[ 9.781897] Freeing unused decrypted memory: 2028K
<6>[ 9.783157] Freeing unused kernel image (initmem) memory: 5628K
<6>[ 9.783183] Write protecting the kernel read-only data: 34816k
<6>[ 9.784216] Freeing unused kernel image (text/rodata gap) memory: 276K
<6>[ 9.784841] Freeing unused kernel image (rodata/data gap) memory: 988K
<6>[ 9.790892] x86/mm: Checked W+X mappings: passed, no W+X pages found.
<6>[ 9.790930] Run /sbin/init as init process
<7>[ 9.790934] with arguments:
<7>[ 9.790935] /sbin/init
<7>[ 9.790936] with environment:
<7>[ 9.790937] HOME=/
<7>[ 9.790938] TERM=linux
<7>[ 9.790938] BOOT_IMAGE=/boot/drm_intel
<6>[ 9.824977] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
<6>[ 9.839549] usb 4-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
<6>[ 9.839566] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
<6>[ 9.839573] usb 4-1: Product: USB 10/100/1000 LAN
<6>[ 9.839578] usb 4-1: Manufacturer: Realtek
<6>[ 9.839582] usb 4-1: SerialNumber: 000001
<7>[ 9.852568] systemd[1]: Inserted module 'autofs4'
<7>[ 9.873511] systemd[1]: systemd 255.4-1ubuntu8.5 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
<7>[ 9.873554] systemd[1]: Detected architecture x86-64.
<7>[ 9.874768] systemd[1]: Hostname set to <shard-mtlp-4>.
<7>[ 10.123378] systemd[1]: Queued start job for default target graphical.target.
<7>[ 10.159654] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
<7>[ 10.161533] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
<7>[ 10.163074] systemd[1]: Created slice user.slice - User and Session Slice.
<7>[ 10.163337] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
<7>[ 10.164054] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
<7>[ 10.164187] systemd[1]: Expecting device dev-disk-by\x2duuid-3868\x2dBF9D.device - /dev/disk/by-uuid/3868-BF9D...
<7>[ 10.164280] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
<7>[ 10.164370] systemd[1]: Reached target slices.target - Slice Units.
<7>[ 10.164445] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
<7>[ 10.164519] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
<7>[ 10.164598] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
<7>[ 10.164880] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
<7>[ 10.165302] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
<7>[ 10.165606] systemd[1]: Listening on multipathd.socket - multipathd control socket.
<7>[ 10.165957] systemd[1]: Listening on syslog.socket - Syslog Socket.
<7>[ 10.166257] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
<7>[ 10.166489] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
<7>[ 10.166820] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
<7>[ 10.167174] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
<7>[ 10.167480] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
<7>[ 10.167693] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 10.168019] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
<7>[ 10.168308] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
<7>[ 10.171727] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
<7>[ 10.176798] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
<7>[ 10.179792] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
<7>[ 10.183281] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
<7>[ 10.189012] systemd[1]: Starting systemd-journald.service - Journal Service...
<7>[ 10.191922] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
<7>[ 10.194571] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
<7>[ 10.197594] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
<7>[ 10.200367] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
<7>[ 10.202812] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
<7>[ 10.205791] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
<7>[ 10.208068] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
<7>[ 10.210483] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
<7>[ 10.215966] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
<7>[ 10.216645] systemd-journald[308]: Collecting audit messages is disabled.
<7>[ 10.222870] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
<7>[ 10.223050] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
<6>[ 10.226018] pstore: Using crash dump compression: deflate
<7>[ 10.226977] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
<6>[ 10.227562] pstore: Registered efi_pstore as persistent store backend
<7>[ 10.232543] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
<7>[ 10.232634] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 10.232710] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<6>[ 10.233478] fuse: init (API version 7.42)
<7>[ 10.235912] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
<7>[ 10.241641] systemd[1]: Started systemd-journald.service - Journal Service.
<6>[ 10.356737] EXT4-fs (nvme0n1p2): re-mounted 8b63c25a-3023-4306-9b91-4e52c14811e3 r/w. Quota mode: none.
<6>[ 10.395988] Adding 8388604k swap on /swap.img. Priority:-2 extents:66 across:173604864k SS
<7>[ 10.411119] systemd-journald[308]: Received client request to flush runtime journal.
<7>[ 10.427460] systemd-journald[308]: /var/log/journal/0337b68cee5945d88e67c05e0be7343f/system.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 10.427472] systemd-journald[308]: Rotating system journal.
<4>[ 11.152697] nvme nvme0: using unchecked data buffer
<6>[ 11.286198] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002)
<6>[ 11.318613] input: Intel HID events as /devices/platform/INTC1077:00/input/input3
<6>[ 11.342463] intel-hid INTC1077:00: platform supports 5 button array
<6>[ 11.353743] input: Intel HID 5 button array as /devices/platform/INTC1077:00/input/input4
<6>[ 11.387145] pci 0000:00:08.0: Setting to D3hot
<6>[ 11.398797] pci 0000:00:05.0: Setting to D3hot
<6>[ 11.411188] pci 0000:00:0b.0: Setting to D3hot
<6>[ 11.422857] pci 0000:00:14.2: enabling device (0000 -> 0002)
<3>[ 11.457406] int3472-tps68470 i2c-INT3472:0d: TPS68470 init error -121
<3>[ 11.468999] int3472-tps68470 i2c-INT3472:0d: probe with driver int3472-tps68470 failed with error -121
<4>[ 11.584500] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform
<6>[ 11.585036] intel_pmc_core INT33A1:00: initialized
<4>[ 11.591648] resource: resource sanity check: requesting [mem 0x00000000fedc0000-0x00000000fedcffff], which spans more than pnp 00:04 [mem 0xfedc0000-0xfedc7fff]
<4>[ 11.591668] caller igen6_probe+0x196/0x940 [igen6_edac] mapping multiple BARs
<6>[ 11.597874] ACPI: bus type thunderbolt registered
<6>[ 11.610784] EDAC MC0: Giving out device to module igen6_edac controller Intel_client_SoC MC#0: DEV 0000:00:00.0 (INTERRUPT)
<6>[ 11.622270] idma64 idma64.0: Found Intel integrated DMA 64-bit
<6>[ 11.622470] i801_smbus 0000:00:1f.4: SPD Write Disable is set
<6>[ 11.622764] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
<6>[ 11.637879] idma64 idma64.1: Found Intel integrated DMA 64-bit
<5>[ 11.638221] audit: type=1400 audit(1743690396.527:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=568 comm="apparmor_parser"
<5>[ 11.638898] audit: type=1400 audit(1743690396.527:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=567 comm="apparmor_parser"
<5>[ 11.639348] audit: type=1400 audit(1743690396.528:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=565 comm="apparmor_parser"
<5>[ 11.640534] audit: type=1400 audit(1743690396.529:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=569 comm="apparmor_parser"
<5>[ 11.644047] audit: type=1400 audit(1743690396.533:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=570 comm="apparmor_parser"
<6>[ 11.644298] EDAC MC1: Giving out device to module igen6_edac controller Intel_client_SoC MC#1: DEV 0000:00:00.0 (INTERRUPT)
<7>[ 11.644641] EDAC igen6 MC1: HANDLING IBECC MEMORY ERROR
<7>[ 11.644646] EDAC igen6 MC1: ADDR 0x7fffffffe0
<7>[ 11.644648] EDAC igen6 MC0: HANDLING IBECC MEMORY ERROR
<7>[ 11.644650] EDAC igen6 MC0: ADDR 0x7fffffffe0
<5>[ 11.644888] audit: type=1400 audit(1743690396.534:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=571 comm="apparmor_parser"
<6>[ 11.645880] EDAC igen6: v2.5.1
<5>[ 11.648861] audit: type=1400 audit(1743690396.538:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=572 comm="apparmor_parser"
<5>[ 11.652672] audit: type=1400 audit(1743690396.541:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=573 comm="apparmor_parser"
<5>[ 11.654806] audit: type=1400 audit(1743690396.544:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=574 comm="apparmor_parser"
<5>[ 11.658456] audit: type=1400 audit(1743690396.547:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=575 comm="apparmor_parser"
<6>[ 11.667141] e1000e: Intel(R) PRO/1000 Network Driver
<6>[ 11.667147] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<6>[ 11.674146] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
<6>[ 11.676009] idma64 idma64.2: Found Intel integrated DMA 64-bit
<6>[ 11.743181] idma64 idma64.3: Found Intel integrated DMA 64-bit
<6>[ 11.908512] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
<6>[ 11.986641] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88
<6>[ 11.986651] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
<6>[ 11.986780] e1000e 0000:00:1f.6 eth0: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF
<6>[ 12.041554] intel_rapl_msr: PL4 support detected.
<6>[ 12.042481] intel_rapl_common: Found RAPL domain package
<6>[ 12.042487] intel_rapl_common: Found RAPL domain core
<6>[ 12.042490] intel_rapl_common: Found RAPL domain uncore
<6>[ 12.042493] intel_rapl_common: Found RAPL domain psys
<6>[ 12.211382] i2c i2c-6: Successfully instantiated SPD at 0x54
<6>[ 12.212300] i2c i2c-6: Successfully instantiated SPD at 0x56
<6>[ 12.224174] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
<6>[ 12.224180] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
<6>[ 12.224182] RAPL PMU: hw unit of domain package 2^-14 Joules
<6>[ 12.224183] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
<6>[ 12.224184] RAPL PMU: hw unit of domain psys 2^-14 Joules
<6>[ 12.225178] usbcore: registered new device driver r8152-cfgselector
<6>[ 12.237133] cryptd: max_cpu_qlen set to 1000
<6>[ 12.239267] e1000e 0000:00:1f.6 eno0: renamed from eth0
<6>[ 12.254883] AES CTR mode by8 optimization enabled
<6>[ 12.260766] proc_thermal_pci 0000:00:04.0: enabling device (0000 -> 0002)
<6>[ 12.266889] intel_rapl_common: Found RAPL domain package
<6>[ 12.273682] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002)
<6>[ 12.288855] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<4>[ 12.290036] spi-nor spi0.0: supply vcc not found, using dummy regulator
<6>[ 12.291661] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_37xx_v0.0.bin, version: 20230726*MTL_CLIENT_SILICON-release*2101*ci_tag_mtl_pv_vpu_rc_20230726_2101*648a666b8b9
<6>[ 12.291667] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS
<5>[ 12.313315] Creating 1 MTD partitions on "0000:00:1f.5":
<5>[ 12.313339] 0x000000000000-0x000002000000 : "BIOS"
<6>[ 12.366212] r8152-cfgselector 4-1: reset SuperSpeed USB device number 2 using xhci_hcd
<6>[ 12.376306] hid: raw HID events driver (C) Jiri Kosina
<6>[ 12.382719] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
<6>[ 12.417214] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 12.419600] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 12.421177] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 12.423019] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 12.424534] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 12.425198] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 12.430812] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 12.433659] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 12.437206] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 12.440839] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 12.443971] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0
<6>[ 12.445755] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 12.447672] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 12.598272] r8152 4-1:1.0 eth0: v1.12.13
<6>[ 12.598398] usbcore: registered new interface driver r8152
<6>[ 12.605656] usbcore: registered new interface driver cdc_ether
<6>[ 12.607344] usbcore: registered new interface driver r8153_ecm
<6>[ 12.632682] r8152 4-1:1.0 enx00e04c6814c9: renamed from eth0
<4>[ 12.694352] block nvme0n1: No UUID available providing old NGUID
<6>[ 13.115952] loop0: detected capacity change from 0 to 8
<6>[ 13.332069] Consider using thermal netlink events interface
<6>[ 15.391564] r8152 4-1:1.0 enx00e04c6814c9: carrier on
<4>[ 22.675613] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component
<3>[ 25.652837] ucsi_acpi USBC000:00: error -ETIMEDOUT: PPM init failed
<7>[ 33.336040] systemd-journald[308]: /var/log/journal/0337b68cee5945d88e67c05e0be7343f/user-1000.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 49.522531] [IGT] i915_module_load: executing
<7>[ 49.540053] [IGT] i915_module_load: starting subtest load
<4>[ 49.992323] **********************************************************
<4>[ 49.992324] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 49.992325] ** **
<4>[ 49.992326] ** trace_printk() being used. Allocating extra memory. **
<4>[ 49.992326] ** **
<4>[ 49.992327] ** This means that this is a DEBUG kernel and it is **
<4>[ 49.992328] ** unsafe for production use. **
<4>[ 49.992329] ** **
<4>[ 49.992329] ** If you see this message and you are not debugging **
<4>[ 49.992330] ** the kernel, report this immediately to your vendor! **
<4>[ 49.992331] ** **
<4>[ 49.992332] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 49.992333] **********************************************************
<5>[ 50.033536] Setting dangerous option force_probe - tainting kernel
<6>[ 50.037787] i915 0000:00:02.0: [drm] Found meteorlake (device ID 7d55) integrated display version 14.00 stepping C0
<7>[ 50.038982] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K
<7>[ 50.039217] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:no slpc:yes)
<7>[ 50.039373] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)
<7>[ 50.039558] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT
<7>[ 50.039716] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT1: Setting up Standalone Media GT
<7>[ 50.039849] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K
<7>[ 50.040042] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT1: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes)
<7>[ 50.040261] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing
<7>[ 50.040402] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 38400 kHz
<7>[ 50.040911] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vdbox enable: 0000, instances: 0000
<7>[ 50.041024] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vebox enable: 0000, instances: 0000
<7>[ 50.041445] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vdbox enable: 0005, instances: 0005
<7>[ 50.041548] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vebox enable: 0001, instances: 0001
<7>[ 50.042036] i915 0000:00:02.0: [drm:ggtt_probe_common [i915]] Using direct GSM access
<7>[ 50.042261] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M
<7>[ 50.042364] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 0M
<7>[ 50.042462] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M
<6>[ 50.042559] i915 0000:00:02.0: [drm] VT-d active for gfx access
<6>[ 50.042880] i915 0000:00:02.0: vgaarb: deactivate vga console
<6>[ 50.043164] i915 0000:00:02.0: [drm] Using Transparent Hugepages
<7>[ 50.043173] i915 0000:00:02.0: [drm:i915_gem_stolen_lmem_setup [i915]] Using direct DSM access
<7>[ 50.043319] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000078400947
<7>[ 50.043798] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 131072K, usable: 126976K
<7>[ 50.044029] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 31514 MiB [mem 0x00000000-0x7b1a85fff], io: n/a
<7>[ 50.044131] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(6): stolen-local: 124 MiB [mem 0x00800000-0x083fffff], io: 124 MiB [mem 0x70800000-0x783fffff]
<7>[ 50.044429] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x63e09018
<7>[ 50.044599] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 3.0.0
<7>[ 50.044747] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported
<7>[ 50.044883] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported
<7>[ 50.045013] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported
<7>[ 50.045136] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Mailbox #2 for backlight present
<7>[ 50.045276] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA)
<7>[ 50.045405] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR5
<7>[ 50.045511] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num qgv points 4
<7>[ 50.045613] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 8
<7>[ 50.045715] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Watermark level 0 adjustment needed: yes
<7>[ 50.045817] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=3200 tRP=64 tRDPRE=40 tRAS=136 tRCD=64 tRC=200
<7>[ 50.045971] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=6000 tRP=112 tRDPRE=80 tRAS=0 tRCD=112 tRC=112
<7>[ 50.046121] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=16 tRCD=120 tRC=136
<7>[ 50.046268] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 3: DCLK=5600 tRP=104 tRDPRE=80 tRAS=240 tRCD=104 tRC=344
<7>[ 50.046407] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 0: num_planes=0 deratedbw=28913 peakbw: 51200
<7>[ 50.046542] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000
<7>[ 50.046675] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 50.046822] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600
<7>[ 50.046951] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 0: num_planes=0 deratedbw=35532 peakbw: 51200
<7>[ 50.047076] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000
<7>[ 50.047202] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 50.047328] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600
<7>[ 50.047457] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200
<7>[ 50.047585] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000
<7>[ 50.047716] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 50.047842] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600
<7>[ 50.047968] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200
<7>[ 50.048096] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000
<7>[ 50.048223] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 50.048348] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600
<7>[ 50.048472] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200
<7>[ 50.048594] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000
<7>[ 50.048723] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 50.048848] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600
<7>[ 50.048973] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200
<7>[ 50.049096] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000
<7>[ 50.049218] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 50.049340] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600
<7>[ 50.050079] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz
<7>[ 50.050224] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT METEORLAKE ", BDB version 253
<7>[ 50.050356] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7)
<7>[ 50.050490] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5)
<7>[ 50.050620] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100)
<7>[ 50.050765] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)
<7>[ 50.050893] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 848)
<7>[ 50.051021] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34)
<7>[ 50.051147] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers
<7>[ 50.051284] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)
<7>[ 50.051413] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366)
<7>[ 50.051541] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305)
<7>[ 50.051668] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 98, min size 136)
<7>[ 50.051811] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822)
<7>[ 50.051941] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210)
<7>[ 50.052065] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7>[ 50.052192] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2
<7>[ 50.052318] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806
<7>[ 50.052449] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6
<7>[ 50.052577] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6
<7>[ 50.052706] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2
<7>[ 50.052831] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6
<7>[ 50.052957] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6
<7>[ 50.053088] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping
<7>[ 50.053213] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[ 50.053336] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[ 50.053457] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 50.053581] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[ 50.053714] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 50.053841] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 50.053972] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a
<7>[ 50.054128] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7>[ 50.054359] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7>[ 50.054534] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 50.054755] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf
<7>[ 50.054989] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.
<7>[ 50.055153] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7>[ 50.055288] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7>[ 50.055425] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7>[ 50.055611] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<6>[ 50.055782] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
<7>[ 50.055800] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A
<7>[ 50.055958] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B
<7>[ 50.056098] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C
<7>[ 50.056236] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D
<7>[ 50.056471] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/mtl_dmc.bin
<7>[ 50.057842] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1
<7>[ 50.058878] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us
<7>[ 50.059038] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 7 (7.0 usec)
<7>[ 50.059183] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 91 (91.0 usec)
<7>[ 50.059323] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 92 (92.0 usec)
<7>[ 50.059457] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 107 (107.0 usec)
<7>[ 50.059590] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 108 (108.0 usec)
<7>[ 50.059728] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 161 (161.0 usec)
<7>[ 50.061244] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:
<7>[ 50.061398] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x86fc0
<7>[ 50.061541] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7>[ 50.061677] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f004 = 0x42c0408 (EVT_HTP)
<7>[ 50.061829] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)
<7>[ 50.061962] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x8f008 = 0x534052f4 (EVT_HTP)
<7>[ 50.062104] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 1:
<7>[ 50.062237] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f074 = 0x96fc0
<7>[ 50.062373] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)
<7>[ 50.062501] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f004 = 0x212c20f4 (EVT_HTP)
<7>[ 50.062627] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)
<7>[ 50.062821] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f008 = 0x222021e8 (EVT_HTP)
<7>[ 50.062955] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)
<7>[ 50.063084] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f00c = 0x23f422dc (EVT_HTP)
<7>[ 50.063212] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 50.063342] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f010 = 0x26ec26c0 (EVT_HTP)
<7>[ 50.063477] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 2:
<7>[ 50.063605] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f474 = 0x9efc0
<7>[ 50.063748] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)
<7>[ 50.063873] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f404 = 0xa618a5e0 (EVT_HTP)
<7>[ 50.063999] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)
<7>[ 50.064125] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f408 = 0xa70ca6d4 (EVT_HTP)
<7>[ 50.064251] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)
<7>[ 50.064374] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f40c = 0xa8e0a7c8 (EVT_HTP)
<7>[ 50.064497] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 50.064618] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f410 = 0xabd8abac (EVT_HTP)
<7>[ 50.064764] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 3:
<7>[ 50.064891] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f874 = 0x53fc0
<7>[ 50.065031] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)
<7>[ 50.065162] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f80c = 0x24a02388 (EVT_HTP)
<7>[ 50.065292] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 50.065420] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f810 = 0x2798276c (EVT_HTP)
<7>[ 50.065550] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 4:
<7>[ 50.065678] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5fc74 = 0x5afc0
<7>[ 50.065824] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)
<7>[ 50.065961] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5fc0c = 0x94a09388 (EVT_HTP)
<7>[ 50.066098] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5fc40 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 50.066233] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5fc10 = 0x9798976c (EVT_HTP)
<7>[ 50.074954] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 4 display pipes available.
<6>[ 50.075083] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/mtl_dmc.bin (v2.23)
<7>[ 50.077384] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 50.077567] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz
<7>[ 50.077745] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 1305600 kHz
<7>[ 50.077932] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:240:DDI A/PHY A] Using AUX CH A (VBT)
<7>[ 50.078126] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:240:DDI A/PHY A]
<7>[ 50.078364] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2
<7>[ 50.078530] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2
<7>[ 50.078697] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless
<7>[ 50.078860] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7>[ 50.079017] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300
<7>[ 50.079173] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002
<7>[ 50.079327] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName
<7>[ 50.079476] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz
<7>[ 50.079626] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7>[ 50.079810] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:240:DDI A/PHY A] initial power sequencer: PPS 0
<7>[ 50.080049] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 50.080214] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 50.080375] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 50.080534] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 50.080695] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200
<7>[ 50.080977] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 50.081303] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A
<7>[ 50.082856] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 50.083169] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7>[ 50.085516] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 00 c4 41 00 00 01 c0 02 00 00 00 00 0b 80
<7>[ 50.086279] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
<7>[ 50.087457] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 04 83 85 04 00
<7>[ 50.089316] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 3
<7>[ 50.090021] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] PSR2 supported
<7>[ 50.091675] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 50.098550] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7>[ 50.098561] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] ELD monitor
<7>[ 50.098566] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] ELD size 20, SAD count 0
<7>[ 50.098614] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:241:eDP-1] using preferred EDID fixed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7>[ 50.099397] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:241:eDP-1] Performing OUI wait (0 ms)
<7>[ 50.100179] i915 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [i915]] [CONNECTOR:241:eDP-1] Detected unsupported HDR backlight interface version 0
<7>[ 50.100361] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:241:eDP-1] DRRS type: none
<7>[ 50.100603] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:241:eDP-1] Using native PCH PWM for backlight control (controller=0)
<7>[ 50.100825] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:241:eDP-1] backlight initialized, enabled, brightness 192000/192000
<7>[ 50.101032] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 50.101191] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 50.101336] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 50.101486] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 50.101647] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200
<7>[ 50.101975] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 50.102257] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:249:DDI B/PHY B] Using AUX CH B (VBT)
<7>[ 50.102406] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:249:DDI B/PHY B]
<7>[ 50.102858] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:249:DDI B/PHY B]
<7>[ 50.103019] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:249:DDI B/PHY B] Using DDC pin 0x2 (VBT)
<7>[ 50.103371] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:267:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)
<7>[ 50.103634] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected)
<7>[ 50.103907] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:267:DDI TC1/PHY TC1]
<7>[ 50.104198] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:276:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)
<7>[ 50.104416] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected)
<7>[ 50.104681] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy)
<7>[ 50.104874] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:276:DDI TC2/PHY TC2]
<7>[ 50.105014] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:276:DDI TC2/PHY TC2] Using DDC pin 0xa (VBT)
<7>[ 50.105229] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:280:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)
<7>[ 50.105434] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port F/TC#3: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected)
<7>[ 50.105639] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:280:DDI TC3/PHY TC3]
<7>[ 50.105941] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:289:DDI TC4/PHY TC4] Using AUX CH USBC4 (VBT)
<7>[ 50.106140] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port G/TC#4: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected)
<7>[ 50.106339] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:289:DDI TC4/PHY TC4]
<7>[ 50.107064] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe A] hw state readout: enabled
<7>[ 50.107331] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:134:pipe B] hw state readout: disabled
<7>[ 50.107588] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:186:pipe C] hw state readout: disabled
<7>[ 50.107860] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:238:pipe D] hw state readout: disabled
<7>[ 50.108019] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:32:plane 1A] hw state readout: enabled, pipe A
<7>[ 50.108159] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:41:plane 2A] hw state readout: disabled, pipe A
<7>[ 50.108297] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:50:plane 3A] hw state readout: disabled, pipe A
<7>[ 50.108429] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 4A] hw state readout: disabled, pipe A
<7>[ 50.108559] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 5A] hw state readout: disabled, pipe A
<7>[ 50.108689] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor A] hw state readout: disabled, pipe A
<7>[ 50.108840] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1B] hw state readout: disabled, pipe B
<7>[ 50.108982] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2B] hw state readout: disabled, pipe B
<7>[ 50.109125] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:plane 3B] hw state readout: disabled, pipe B
<7>[ 50.109269] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:111:plane 4B] hw state readout: disabled, pipe B
<7>[ 50.109407] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:120:plane 5B] hw state readout: disabled, pipe B
<7>[ 50.109538] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:129:cursor B] hw state readout: disabled, pipe B
<7>[ 50.109669] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:136:plane 1C] hw state readout: disabled, pipe C
<7>[ 50.109817] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:145:plane 2C] hw state readout: disabled, pipe C
<7>[ 50.109956] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:154:plane 3C] hw state readout: disabled, pipe C
<7>[ 50.110102] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:163:plane 4C] hw state readout: disabled, pipe C
<7>[ 50.110244] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:172:plane 5C] hw state readout: disabled, pipe C
<7>[ 50.110373] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:181:cursor C] hw state readout: disabled, pipe C
<7>[ 50.110502] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:188:plane 1D] hw state readout: disabled, pipe D
<7>[ 50.110631] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:197:plane 2D] hw state readout: disabled, pipe D
<7>[ 50.110770] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:206:plane 3D] hw state readout: disabled, pipe D
<7>[ 50.110904] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:215:plane 4D] hw state readout: disabled, pipe D
<7>[ 50.111055] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:224:plane 5D] hw state readout: disabled, pipe D
<7>[ 50.111208] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:233:cursor D] hw state readout: disabled, pipe D
<7>[ 50.111976] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
<7>[ 50.112180] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:240:DDI A/PHY A] hw state readout: enabled, pipe A
<7>[ 50.112333] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:249:DDI B/PHY B] hw state readout: disabled, pipe A
<7>[ 50.112464] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:251:DP-MST A] hw state readout: disabled, pipe A
<7>[ 50.112588] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:252:DP-MST B] hw state readout: disabled, pipe B
<7>[ 50.112719] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:253:DP-MST C] hw state readout: disabled, pipe C
<7>[ 50.112846] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:254:DP-MST D] hw state readout: disabled, pipe D
<7>[ 50.113053] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected)
<7>[ 50.113206] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:267:DDI TC1/PHY TC1] hw state readout: disabled, pipe A
<7>[ 50.113330] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:269:DP-MST A] hw state readout: disabled, pipe A
<7>[ 50.113452] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:270:DP-MST B] hw state readout: disabled, pipe B
<7>[ 50.113572] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:271:DP-MST C] hw state readout: disabled, pipe C
<7>[ 50.113703] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:272:DP-MST D] hw state readout: disabled, pipe D
<7>[ 50.113868] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected)
<7>[ 50.114003] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:276:DDI TC2/PHY TC2] hw state readout: disabled, pipe A
<7>[ 50.114141] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port F/TC#3: sanitize mode (disconnected)
<7>[ 50.114269] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:280:DDI TC3/PHY TC3] hw state readout: disabled, pipe A
<7>[ 50.114393] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:282:DP-MST A] hw state readout: disabled, pipe A
<7>[ 50.114517] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:283:DP-MST B] hw state readout: disabled, pipe B
<7>[ 50.114640] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:284:DP-MST C] hw state readout: disabled, pipe C
<7>[ 50.114775] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:285:DP-MST D] hw state readout: disabled, pipe D
<7>[ 50.114918] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port G/TC#4: sanitize mode (disconnected)
<7>[ 50.115070] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:289:DDI TC4/PHY TC4] hw state readout: disabled, pipe A
<7>[ 50.115230] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:291:DP-MST A] hw state readout: disabled, pipe A
<7>[ 50.115355] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:292:DP-MST B] hw state readout: disabled, pipe B
<7>[ 50.115477] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:293:DP-MST C] hw state readout: disabled, pipe C
<7>[ 50.115598] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:294:DP-MST D] hw state readout: disabled, pipe D
<7>[ 50.115825] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:241:eDP-1] hw state readout: enabled
<7>[ 50.115990] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:250:DP-1] hw state readout: disabled
<7>[ 50.116156] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:262:HDMI-A-1] hw state readout: disabled
<7>[ 50.116300] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:268:DP-2] hw state readout: disabled
<7>[ 50.116438] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:277:HDMI-A-2] hw state readout: disabled
<7>[ 50.116575] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:281:DP-3] hw state readout: disabled
<7>[ 50.116719] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:290:DP-4] hw state readout: disabled
<7>[ 50.116925] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:32:plane 1A] min_cdclk 256910 kHz
<7>[ 50.117071] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:41:plane 2A] min_cdclk 0 kHz
<7>[ 50.117212] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:50:plane 3A] min_cdclk 0 kHz
<7>[ 50.117360] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 4A] min_cdclk 0 kHz
<7>[ 50.117485] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 5A] min_cdclk 0 kHz
<7>[ 50.117609] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor A] min_cdclk 0 kHz
<7>[ 50.117762] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1B] min_cdclk 0 kHz
<7>[ 50.117889] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2B] min_cdclk 0 kHz
<7>[ 50.118015] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:plane 3B] min_cdclk 0 kHz
<7>[ 50.118140] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:111:plane 4B] min_cdclk 0 kHz
<7>[ 50.118266] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:120:plane 5B] min_cdclk 0 kHz
<7>[ 50.118389] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:129:cursor B] min_cdclk 0 kHz
<7>[ 50.118512] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:136:plane 1C] min_cdclk 0 kHz
<7>[ 50.118638] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:145:plane 2C] min_cdclk 0 kHz
<7>[ 50.118774] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:154:plane 3C] min_cdclk 0 kHz
<7>[ 50.118904] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:163:plane 4C] min_cdclk 0 kHz
<7>[ 50.119053] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:172:plane 5C] min_cdclk 0 kHz
<7>[ 50.119189] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:181:cursor C] min_cdclk 0 kHz
<7>[ 50.119320] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:188:plane 1D] min_cdclk 0 kHz
<7>[ 50.119440] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:197:plane 2D] min_cdclk 0 kHz
<7>[ 50.119559] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:206:plane 3D] min_cdclk 0 kHz
<7>[ 50.119676] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:215:plane 4D] min_cdclk 0 kHz
<7>[ 50.119807] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:224:plane 5D] min_cdclk 0 kHz
<7>[ 50.119937] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:233:cursor D] min_cdclk 0 kHz
<7>[ 50.120277] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:82:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no
<7>[ 50.120415] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:134:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 50.120546] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:186:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 50.120680] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:238:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 50.120828] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe A data rate 2055280 num active planes 1
<7>[ 50.120990] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe B data rate 0 num active planes 0
<7>[ 50.121150] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe C data rate 0 num active planes 0
<7>[ 50.121310] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe D data rate 0 num active planes 0
<7>[ 50.121521] i915 0000:00:02.0: [drm:intel_cmtg_sanitize [i915]] CMTG readout: CMTG A: enabled, CMTG B: n/a, Transcoder A secondary: yes, Transcoder B secondary: no
<7>[ 50.121807] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe A] enable: yes [setup_hw_state]
<7>[ 50.121947] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 50.122090] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
<7>[ 50.122223] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>
<7>[ 50.122360] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 50.122497] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0
<7>[ 50.122630] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0
<7>[ 50.122773] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 623587, link_n: 524288, tu: 64
<7>[ 50.122915] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 50.123041] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled
<7>[ 50.123178] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled
<7>[ 50.123308] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7>[ 50.123436] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0
<7>[ 50.123563] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7>[ 50.123709] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1
<7>[ 50.123838] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0
<7>[ 50.123969] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0
<7>[ 50.124098] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0
<7>[ 50.124231] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa
<7>[ 50.124358] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa
<7>[ 50.124485] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa
<7>[ 50.124610] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa
<7>[ 50.124752] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa
<7>[ 50.124881] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 513820
<7>[ 50.125007] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0
<7>[ 50.125133] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 50.125258] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 50.125383] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0
<7>[ 50.125508] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7>[ 50.125631] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0
<7>[ 50.125774] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 50.125903] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 50.126030] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.126153] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.126276] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.126401] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 50.126525] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 50.126651] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.126800] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.126933] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.127083] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 50.127240] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:134:pipe B] enable: no [setup_hw_state]
<7>[ 50.127393] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:186:pipe C] enable: no [setup_hw_state]
<7>[ 50.127545] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:238:pipe D] enable: no [setup_hw_state]
<7>[ 50.128052] i915 0000:00:02.0: [drm:skl_get_initial_plane_config [i915]] [CRTC:82:pipe A][PLANE:32:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800
<7>[ 50.128198] i915 0000:00:02.0: [drm:initial_plane_vma [i915]] Using dma_addr=0x0000000000800000, based on initial plane programming
<7>[ 50.128351] i915 0000:00:02.0: [drm:_i915_gem_object_stolen_init [i915]] creating preallocated stolen object: stolen_offset=0x0000000000000000, size=0x00000000013c7000
<7>[ 50.128858] i915 0000:00:02.0: [drm:initial_plane_vma [i915]] Initial plane fb bound to 0x0 in the ggtt (original 0xfec00000)
<7>[ 50.131973] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [2048K, 832K)
<7>[ 50.137605] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [1040K, 832K)
<7>[ 50.137756] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [13c7000, fee00000]
<7>[ 50.137871] i915 0000:00:02.0: [drm:nop_init_clock_gating [i915]] No clock gating settings or workarounds applied.
<7>[ 50.137980] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: L3BANK steering: group=0x0, instance=0x0
<7>[ 50.138106] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: DSS steering: group=0x0, instance=0x0
<7>[ 50.138225] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: INSTANCE 0 steering: group=0x0, instance=0x0
<7>[ 50.138348] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global
<7>[ 50.140629] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 7 engine workarounds on rcs'0
<7>[ 50.140784] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 whitelist workarounds on rcs'0
<7>[ 50.140913] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 7 context workarounds on rcs'0
<7>[ 50.141725] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 engine workarounds on bcs'0
<7>[ 50.141859] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 context workarounds on bcs'0
<7>[ 50.142190] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 engine workarounds on ccs'0
<7>[ 50.142315] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 context workarounds on ccs'0
<7>[ 50.144868] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)
<7>[ 50.145029] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 24 ext-regs.
<7>[ 50.145178] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset
<7>[ 50.164338] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0x13c804f
<7>[ 50.164502] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x410000
<7>[ 50.164639] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4
<7>[ 50.164825] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3
<7>[ 50.164954] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x2f92
<7>[ 50.165080] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x7d550008
<7>[ 50.165204] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0
<7>[ 50.165326] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0
<7>[ 50.165448] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0
<7>[ 50.165571] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0
<7>[ 50.165702] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0
<7>[ 50.165822] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0
<7>[ 50.165939] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0
<7>[ 50.166056] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0
<6>[ 50.166950] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/mtl_guc_70.bin version 70.36.0
<7>[ 50.176791] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 8ms, freq = 1750MHz -> 2100MHz vs 2200MHz, status = 0x8002F034, count = 0, ret = 0
<7>[ 50.177631] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<6>[ 50.180324] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled
<6>[ 50.180327] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled
<6>[ 50.180763] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled
<7>[ 50.181037] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT0: GUC: Querying HW config table: size = 0, offset = 0x00000000
<7>[ 50.181940] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT0: GUC: Querying HW config table: size = 752, offset = 0x01FFC000
<7>[ 50.188769] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: OADDRM steering: group=0x0, instance=0x0
<7>[ 50.188906] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 5 GT workarounds on global
<7>[ 50.189978] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'0
<7>[ 50.190107] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'0
<7>[ 50.190635] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'2
<7>[ 50.190774] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'2
<7>[ 50.191505] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vecs'0
<7>[ 50.191626] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vecs'0
<7>[ 50.192132] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on other'6
<7>[ 50.192251] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on other'6
<7>[ 50.195658] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT1: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)
<7>[ 50.195833] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT1: GUC: capture found 24 ext-regs.
<7>[ 50.195978] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT1: GUC: Used 4 KB for temporary ADS regset
<7>[ 50.216531] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 0] = 0x1ffd04f
<7>[ 50.216680] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 1] = 0x400000
<7>[ 50.216838] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 2] = 0x4
<7>[ 50.216968] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 3] = 0x3
<7>[ 50.217095] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 4] = 0x47fc
<7>[ 50.217222] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 5] = 0x7d550008
<7>[ 50.217346] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 6] = 0x0
<7>[ 50.217469] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 7] = 0x0
<7>[ 50.217595] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 8] = 0x0
<7>[ 50.217731] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 9] = 0x0
<7>[ 50.217852] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[10] = 0x0
<7>[ 50.217972] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[11] = 0x0
<7>[ 50.218091] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[12] = 0x0
<7>[ 50.218213] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[13] = 0x0
<7>[ 50.218333] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT1: HuC: loaded by GSC = no
<7>[ 50.222174] i915 0000:00:02.0: [drm:i915_gsc_proxy_component_bind [i915]] GT1: GSC proxy mei component bound
<6>[ 50.222322] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops i915_gsc_proxy_component_ops [i915])
<6>[ 50.222738] i915 0000:00:02.0: [drm] GT1: GuC firmware i915/mtl_guc_70.bin version 70.36.0
<6>[ 50.222742] i915 0000:00:02.0: [drm] GT1: HuC firmware i915/mtl_huc_gsc.bin version 8.5.4
<7>[ 50.236763] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT1: GUC: init took 12ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x8002F034, count = 0, ret = 0
<7>[ 50.237010] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled
<7>[ 50.244953] i915 0000:00:02.0: [drm:intel_huc_wait_for_auth_complete [i915]] GT1: HuC: auth took 7ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x0000C1DC, count = 0, ret = 0
<6>[ 50.245454] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for clear media
<6>[ 50.246631] i915 0000:00:02.0: [drm] GT1: GUC: submission enabled
<6>[ 50.246638] i915 0000:00:02.0: [drm] GT1: GUC: SLPC enabled
<6>[ 50.247019] i915 0000:00:02.0: [drm] GT1: GUC: RC enabled
<7>[ 50.247291] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT1: GUC: Querying HW config table: size = 0, offset = 0x00000000
<7>[ 50.248783] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT1: GUC: Querying HW config table: size = 752, offset = 0xFEDA5000
<7>[ 50.254730] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0
<7>[ 50.254851] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0
<7>[ 50.254960] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0
<7>[ 50.255064] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'2 to vcs1
<7>[ 50.255169] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0
<7>[ 50.255273] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed ccs'0 to ccs0
<7>[ 50.255373] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed other'6 to other0
<6>[ 50.256815] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized
<7>[ 50.258029] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[ 50.258181] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[ 50.258436] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[ 50.258602] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[ 50.258773] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] ddb ( 0 - 2048) -> ( 0 - 4001), size 2048 -> 4001
<7>[ 50.258905] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:77:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95
<7>[ 50.259035] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7>[ 50.259166] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] lines 2, 2, 2, 2, 2, 2, 0, 0, 1, 3, 1 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7>[ 50.259297] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] blocks 49, 49, 49, 49, 49, 49, 0, 0, 7, 73, 7 -> 49, 385, 385, 457, 457, 673, 0, 0, 0, 73, 0
<7>[ 50.259423] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 0, 82, 0
<7>[ 50.259550] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7>[ 50.259710] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7>[ 50.259865] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7>[ 50.260008] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7>[ 50.260147] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7>[ 50.260286] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (40143 kHz) > old min cdclk (0 kHz)
<7>[ 50.261901] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0xffff0072 0x1341b072)
<7>[ 50.262069] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:240:DDI A/PHY A]
<7>[ 50.262210] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DDI B/PHY B]
<7>[ 50.262344] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:251:DP-MST A]
<7>[ 50.262475] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:252:DP-MST B]
<7>[ 50.262603] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:253:DP-MST C]
<7>[ 50.262748] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:254:DP-MST D]
<7>[ 50.262883] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DDI TC1/PHY TC1]
<7>[ 50.263014] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:269:DP-MST A]
<7>[ 50.263144] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:270:DP-MST B]
<7>[ 50.263270] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DP-MST C]
<7>[ 50.263395] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:272:DP-MST D]
<7>[ 50.263519] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:276:DDI TC2/PHY TC2]
<7>[ 50.263642] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DDI TC3/PHY TC3]
<7>[ 50.263782] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:282:DP-MST A]
<7>[ 50.263907] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:283:DP-MST B]
<7>[ 50.264031] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DP-MST C]
<7>[ 50.264158] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:285:DP-MST D]
<7>[ 50.264284] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DDI TC4/PHY TC4]
<7>[ 50.264404] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:291:DP-MST A]
<7>[ 50.264528] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:292:DP-MST B]
<7>[ 50.264652] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:293:DP-MST C]
<7>[ 50.264800] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:294:DP-MST D]
<7>[ 50.265034] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 42393600 bytes of contiguous stolen space for FBC, limit: 1
<7>[ 50.265180] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:32:plane 1A]
<7>[ 50.265371] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: no -> yes (pipe: A)
<7>[ 50.265523] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 4 (mbus joined: yes)
<7>[ 50.274402] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0x2000071 0x1341b072)
<7>[ 50.278240] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:241:eDP-1] adding connector to sysfs
<7>[ 50.280814] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:241:eDP-1] backlight device intel_backlight registered
<7>[ 50.281177] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
<7>[ 50.282679] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:241:eDP-1] generating connector hotplug event
<7>[ 50.282822] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:250:DP-1] adding connector to sysfs
<7>[ 50.283282] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1
<7>[ 50.284097] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:250:DP-1] generating connector hotplug event
<7>[ 50.284138] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:262:HDMI-A-1] adding connector to sysfs
<7>[ 50.284411] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:262:HDMI-A-1] generating connector hotplug event
<7>[ 50.284444] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:268:DP-2] adding connector to sysfs
<7>[ 50.284781] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2
<7>[ 50.285323] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:268:DP-2] generating connector hotplug event
<7>[ 50.285354] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:277:HDMI-A-2] adding connector to sysfs
<7>[ 50.285607] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:277:HDMI-A-2] generating connector hotplug event
<7>[ 50.285634] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:281:DP-3] adding connector to sysfs
<7>[ 50.285943] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3
<7>[ 50.286515] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:281:DP-3] generating connector hotplug event
<7>[ 50.286547] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:290:DP-4] adding connector to sysfs
<7>[ 50.286869] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY TC4 bus for card0-DP-4
<7>[ 50.287450] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:290:DP-4] generating connector hotplug event
<6>[ 50.287475] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0
<7>[ 50.289871] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected
<6>[ 50.299806] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6>[ 50.302359] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
<7>[ 50.303518] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7>[ 50.303730] i915 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [i915]] aud_ts_cdclk set to M=60, N=768
<7>[ 50.305536] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] found possible fb from [PLANE:32:plane 1A]
<7>[ 50.305636] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix
<7>[ 50.305686] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:134:pipe B] not active, skipping
<7>[ 50.305855] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:186:pipe C] not active, skipping
<7>[ 50.306004] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:238:pipe D] not active, skipping
<7>[ 50.306151] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] checking [PLANE:32:plane 1A] for BIOS fb
<7>[ 50.306324] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:82:pipe A] area: 2880x1800, bpp: 32, size: 20736000
<6>[ 50.306380] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])
<7>[ 50.306503] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] fb big enough [PLANE:32:plane 1A] (20738048 >= 20736000)
<7>[ 50.306685] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:134:pipe B] not active, skipping
<7>[ 50.306855] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010
<7>[ 50.306901] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:186:pipe C] not active, skipping
<7>[ 50.307082] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:238:pipe D] not active, skipping
<7>[ 50.307261] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] using BIOS fb for initial console
<7>[ 50.307587] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7>[ 50.307654] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:250:DP-1]
<7>[ 50.309655] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 50.311480] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9a01
<7>[ 50.311915] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL
<7>[ 50.311927] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled
<7>[ 50.312782] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:250:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 50.312936] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:262:HDMI-A-1]
<7>[ 50.318176] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:262:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 50.318320] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:268:DP-2]
<7>[ 50.318676] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 50.318924] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:268:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 50.319077] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:277:HDMI-A-2]
<7>[ 50.319373] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy)
<7>[ 50.323783] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:277:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 50.323927] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:281:DP-3]
<7>[ 50.324161] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 50.324365] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:281:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 50.324501] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:290:DP-4]
<7>[ 50.324743] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt)
<7>[ 50.324944] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:290:DP-4] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 50.325081] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[ 50.325207] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:241:eDP-1]
<7>[ 50.325243] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:241:eDP-1]
<7>[ 50.327224] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 50.328406] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 50.328723] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7>[ 50.329009] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7>[ 50.329392] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7>[ 50.329400] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] ELD monitor
<7>[ 50.329408] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] ELD size 20, SAD count 0
<7>[ 50.329443] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] VRR capable: no
<7>[ 50.329624] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 50.330569] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 50.330737] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 50.332468] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:241:eDP-1] status updated from unknown to connected
<7>[ 50.332765] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[ 50.332802] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:241:eDP-1] probed modes:
<7>[ 50.332819] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7>[ 50.332833] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:250:DP-1]
<7>[ 50.332846] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:250:DP-1]
<7>[ 50.337728] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:250:DP-1] disconnected
<7>[ 50.337739] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:262:HDMI-A-1]
<7>[ 50.337746] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:262:HDMI-A-1]
<7>[ 50.342723] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:262:HDMI-A-1] disconnected
<7>[ 50.342733] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:268:DP-2]
<7>[ 50.342741] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:268:DP-2]
<7>[ 50.343099] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:268:DP-2] disconnected
<7>[ 50.343108] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:277:HDMI-A-2]
<7>[ 50.343116] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:277:HDMI-A-2]
<7>[ 50.347762] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:277:HDMI-A-2] disconnected
<7>[ 50.347773] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:281:DP-3]
<7>[ 50.347780] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:281:DP-3]
<7>[ 50.348009] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:281:DP-3] disconnected
<7>[ 50.348017] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:290:DP-4]
<7>[ 50.348025] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:290:DP-4]
<7>[ 50.348243] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:290:DP-4] disconnected
<7>[ 50.348250] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:241:eDP-1] enabled? yes
<7>[ 50.348255] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:250:DP-1] enabled? no
<7>[ 50.348256] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:HDMI-A-1] enabled? no
<7>[ 50.348258] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:268:DP-2] enabled? no
<7>[ 50.348259] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:277:HDMI-A-2] enabled? no
<7>[ 50.348261] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:281:DP-3] enabled? no
<7>[ 50.348262] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:290:DP-4] enabled? no
<7>[ 50.348356] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 50.348374] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:241:eDP-1] found preferred mode: 2880x1800
<7>[ 50.348376] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7>[ 50.348386] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 50.348454] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<7>[ 50.348468] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] re-using BIOS fb
<7>[ 50.348684] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 2880x1800 fb: 0x00000000
<6>[ 50.349578] fbcon: i915drmfb (fb0) is primary device
<7>[ 50.350425] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:241:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7>[ 50.350596] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:240:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 max link_bpp 30.0000
<7>[ 50.350769] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 link rate required 1926825 available 2160000
<7>[ 50.350925] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7>[ 50.351076] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:240:DDI A/PHY A] [CRTC:82:pipe A]
<7>[ 50.351219] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 623587/524288, found tu 64, data 7483046/8388608 link 498869/524288)
<7>[ 50.351374] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10
<7>[ 50.351515] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:
<7>[ 50.351481] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A
<7>[ 50.351654] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] c10pll_hw_state: fracen: no,
<7>[ 50.351744] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A
<7>[ 50.351807] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] multiplier: 225, tx_clk_div: 1.
<7>[ 50.351947] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] c10pll_rawhw_state:
<7>[ 50.351975] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A
<7>[ 50.352082] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21
<7>[ 50.352217] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7>[ 50.352198] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A
<7>[ 50.352352] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 50.352417] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B
<7>[ 50.352485] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 50.352617] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 50.352634] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B
<7>[ 50.352753] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7>[ 50.352879] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:
<7>[ 50.352861] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B
<7>[ 50.353038] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] c10pll_hw_state: fracen: yes,
<7>[ 50.353085] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B
<7>[ 50.353172] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] quot: 40960, rem: 0, den: 1,
<7>[ 50.353303] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] multiplier: 140, tx_clk_div: 0.
<7>[ 50.353299] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C
<7>[ 50.353427] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] c10pll_rawhw_state:
<7>[ 50.353549] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21
<7>[ 50.353513] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C
<7>[ 50.353669] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7>[ 50.353739] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C
<7>[ 50.353801] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 50.353931] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 50.353958] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C
<7>[ 50.354070] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7>[ 50.354195] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7>[ 50.354174] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D
<7>[ 50.354322] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30)
<7>[ 50.354386] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D
<7>[ 50.354469] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in port_clock (expected 432000, found 540000)
<7>[ 50.354608] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7>[ 50.354599] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D
<7>[ 50.354803] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7>[ 50.354815] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D
<7>[ 50.354953] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7>[ 50.355038] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E
<7>[ 50.355103] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 0, 73, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7>[ 50.355241] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 0, 82, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7>[ 50.355250] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E
<7>[ 50.355381] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:41:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 50.355460] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E
<7>[ 50.355513] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:41:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 50.355648] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:41:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 50.355669] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E
<7>[ 50.355780] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:41:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 50.355902] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:50:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 50.355881] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F
<7>[ 50.356023] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:50:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 50.356090] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F
<7>[ 50.356146] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:50:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 50.356275] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:50:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 50.356299] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F
<7>[ 50.356406] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:59:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 50.356529] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:59:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 50.356510] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F
<7>[ 50.356651] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:59:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 50.356724] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G
<7>[ 50.356778] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:59:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 50.356905] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 50.356938] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G
<7>[ 50.357048] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 50.357185] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 50.357156] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G
<7>[ 50.357316] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 50.357366] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G
<7>[ 50.357436] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:77:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 50.357555] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:77:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 50.357577] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H
<7>[ 50.357689] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:77:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 50.357792] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H
<7>[ 50.357836] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:77:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 50.358012] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe A] enable: yes [modeset]
<7>[ 50.358009] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H
<7>[ 50.358174] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 50.358228] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H
<7>[ 50.358317] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7>[ 50.358450] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>
<7>[ 50.358440] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I
<7>[ 50.358581] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 50.358651] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I
<7>[ 50.358712] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0
<7>[ 50.358840] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0
<7>[ 50.358866] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I
<7>[ 50.358975] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64
<7>[ 50.359109] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 50.359079] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I
<7>[ 50.359238] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled
<7>[ 50.359379] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled
<7>[ 50.359517] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7>[ 50.359646] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0
<7>[ 50.359783] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7>[ 50.359928] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 4, length 14
<7>[ 50.360073] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB
<7>[ 50.360214] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB
<7>[ 50.360354] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0
<7>[ 50.360496] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range
<7>[ 50.360637] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined
<7>[ 50.360788] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1
<7>[ 50.360931] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vblank delay: 1, framestart delay: 1, MSA timing delay: 0
<7>[ 50.361068] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1878, vmax: 1878, flipline: 1878, pipeline full: 0, guardband: 77 vsync start: 75, vsync end: 69
<7>[ 50.361197] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1878, vmax vtotal: 1878
<7>[ 50.361324] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7>[ 50.361456] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7>[ 50.361591] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa
<7>[ 50.361736] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa
<7>[ 50.361894] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa
<7>[ 50.362039] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820
<7>[ 50.362189] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0
<7>[ 50.362337] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 50.362477] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 50.362613] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0
<7>[ 50.362769] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000
<7>[ 50.362921] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7>[ 50.363068] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 50.363216] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000
<6>[ 50.363392] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
<7>[ 50.363346] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.363483] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.363632] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.363802] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 50.363940] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 50.364078] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<6>[ 50.364161] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
<7>[ 50.364218] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.364366] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.364500] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<6>[ 50.364582] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
<7>[ 50.364642] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:32:plane 1A] fb: [FB:299] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7>[ 50.364796] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0
<6>[ 50.365010] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
<7>[ 50.364944] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7>[ 50.365082] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:41:plane 2A] fb: [NOFB], visible: no
<7>[ 50.365235] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:50:plane 3A] fb: [NOFB], visible: no
<7>[ 50.365397] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:59:plane 4A] fb: [NOFB], visible: no
<7>[ 50.365554] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:68:plane 5A] fb: [NOFB], visible: no
<7>[ 50.365691] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:77:cursor A] fb: [NOFB], visible: no
<7>[ 50.374434] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]
<6>[ 50.403214] i915 0000:00:02.0: [drm] GT1: Loaded GSC firmware i915/mtl_gsc_1.bin (cv1.0, r102.1.15.1926, svn 1)
<7>[ 50.423886] i915 0000:00:02.0: [drm:intel_huc_wait_for_auth_complete [i915]] GT1: HuC: auth took 0ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x00116C68, count = 0, ret = 0
<6>[ 50.424206] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for all workloads
<7>[ 50.580205] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:241:eDP-1] set backlight PWM = 0
<7>[ 50.581607] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A
<7>[ 50.586609] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 turn panel power off
<7>[ 50.587085] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 wait for panel power off time
<7>[ 50.587016] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000
<7>[ 50.587530] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7>[ 50.587587] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:240:DDI A/PHY A] - short
<7>[ 50.637741] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7>[ 50.638609] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:240:DDI A/PHY A]
<7>[ 50.638667] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A
<7>[ 50.639631] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7>[ 50.639953] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:32:plane 1A]
<7>[ 50.640186] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:240:DDI A/PHY A] - long
<7>[ 50.640605] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0x2000071 0x13421c72)
<7>[ 50.640698] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10
<7>[ 50.640982] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:240:DDI A/PHY A]
<7>[ 50.641225] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DDI B/PHY B]
<7>[ 50.641300] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:240:DDI A/PHY A]
<7>[ 50.641458] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:251:DP-MST A]
<7>[ 50.641722] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:252:DP-MST B]
<7>[ 50.641945] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:253:DP-MST C]
<7>[ 50.642169] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:254:DP-MST D]
<7>[ 50.642387] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DDI TC1/PHY TC1]
<7>[ 50.642603] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:269:DP-MST A]
<7>[ 50.642829] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:270:DP-MST B]
<7>[ 50.643049] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DP-MST C]
<7>[ 50.643273] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:272:DP-MST D]
<7>[ 50.643494] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:276:DDI TC2/PHY TC2]
<7>[ 50.643636] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DDI TC3/PHY TC3]
<7>[ 50.643817] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:282:DP-MST A]
<7>[ 50.643946] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:283:DP-MST B]
<7>[ 50.644092] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DP-MST C]
<7>[ 50.644243] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:285:DP-MST D]
<7>[ 50.644372] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DDI TC4/PHY TC4]
<7>[ 50.644495] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:291:DP-MST A]
<7>[ 50.644618] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:292:DP-MST B]
<7>[ 50.644758] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:293:DP-MST C]
<7>[ 50.644936] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:294:DP-MST D]
<7>[ 50.645163] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A
<7>[ 50.646654] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 turn panel power on
<7>[ 50.646832] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 wait for panel power cycle (492 ms remaining)
<7>[ 50.885498] i915 0000:00:02.0: [drm:gsc_work [i915]] GT1: GSC Proxy initialized
<7>[ 51.147831] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060
<7>[ 51.148519] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7>[ 51.149288] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 wait for panel power on
<7>[ 51.149933] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7>[ 51.181310] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7>[ 51.181869] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:240:DDI A/PHY A] - long
<7>[ 51.182383] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20
<7>[ 51.182917] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:240:DDI A/PHY A]
<7>[ 51.350028] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7>[ 51.353087] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 51.353553] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7>[ 51.357746] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80
<7>[ 51.358620] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:241:eDP-1][ENCODER:240:DDI A/PHY A][DPRX] Reloading eDP link rates
<7>[ 51.359603] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:241:eDP-1][ENCODER:240:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07
<7>[ 51.360654] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:241:eDP-1][ENCODER:240:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7>[ 51.361363] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:241:eDP-1][ENCODER:240:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7>[ 51.362547] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:241:eDP-1][ENCODER:240:DDI A/PHY A][DPRX] Clock recovery OK
<7>[ 51.362676] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:241:eDP-1][ENCODER:240:DDI A/PHY A][DPRX] Using DP training pattern TPS3
<7>[ 51.364284] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:241:eDP-1][ENCODER:240:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7>[ 51.364411] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:241:eDP-1][ENCODER:240:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4
<7>[ 51.365038] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A
<7>[ 51.365296] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]
<7>[ 51.365432] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A
<7>[ 51.365624] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:241:eDP-1] set backlight PWM = 192000
<7>[ 51.376613] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7>[ 51.378582] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:241:eDP-1]
<7>[ 51.378811] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:82:pipe A]
<7>[ 51.380156] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp
<6>[ 51.382043] Console: switching to colour frame buffer device 180x56
<6>[ 51.389450] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
<7>[ 51.399358] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 51.399393] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected)
<7>[ 51.399347] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 51.399345] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected)
<7>[ 51.402597] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 14
<7>[ 51.402750] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: C0
<7>[ 51.402892] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no
<7>[ 51.403033] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: yes
<7>[ 51.403182] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: yes
<7>[ 51.403321] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes
<7>[ 51.403461] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes
<7>[ 51.403632] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: yes
<7>[ 51.403824] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes
<7>[ 51.403978] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no
<7>[ 51.404118] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes
<7>[ 51.404250] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no
<7>[ 51.404382] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes
<7>[ 51.404526] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no
<7>[ 51.404657] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes
<7>[ 51.404788] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: no
<7>[ 51.404918] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no
<7>[ 51.405047] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no
<7>[ 51.405175] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes
<7>[ 51.405301] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes
<7>[ 51.405428] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: yes
<7>[ 51.405572] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 38400 kHz
<7>[ 51.405749] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]]
<7>[ 51.405763] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 51.405969] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:241:eDP-1]
<7>[ 51.405980] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:241:eDP-1]
<7>[ 51.407028] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device
<7>[ 51.407131] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 51.407377] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D
<7>[ 51.408216] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C
<7>[ 51.408917] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B
<7>[ 51.410005] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x7d55 rev=0x08 platform=METEORLAKE (subplatform=0x0) gen=12
<7>[ 51.410112] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 12.71
<7>[ 51.410211] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 13
<7>[ 51.410309] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: B0
<7>[ 51.410311] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 51.410435] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: C0
<7>[ 51.410470] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7>[ 51.410537] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 0
<7>[ 51.410630] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x41
<7>[ 51.410612] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7>[ 51.410720] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x211000
<7>[ 51.410829] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7>[ 51.410834] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] ELD monitor
<7>[ 51.410838] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] ELD size 20, SAD count 0
<7>[ 51.410810] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: METEORLAKE
<7>[ 51.410854] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] VRR capable: no
<7>[ 51.410903] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48
<7>[ 51.410994] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2
<7>[ 51.410991] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 51.411083] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 46
<7>[ 51.411177] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no
<7>[ 51.411275] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no
<7>[ 51.411389] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no
<7>[ 51.411493] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes
<7>[ 51.411590] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no
<7>[ 51.411686] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no
<7>[ 51.411789] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes
<7>[ 51.411843] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 51.411890] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes
<7>[ 51.411986] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no
<7>[ 51.411984] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 51.412079] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: yes
<7>[ 51.412170] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: yes
<7>[ 51.412262] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes
<7>[ 51.412398] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no
<7>[ 51.412502] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no
<7>[ 51.412603] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: yes
<7>[ 51.412698] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: yes
<7>[ 51.412798] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no
<7>[ 51.412895] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no
<7>[ 51.412991] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: no
<7>[ 51.413085] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes
<7>[ 51.413181] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: yes
<7>[ 51.413276] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no
<7>[ 51.413363] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:241:eDP-1] probed modes:
<7>[ 51.413376] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7>[ 51.413384] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:250:DP-1]
<7>[ 51.413384] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no
<7>[ 51.413392] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:250:DP-1]
<7>[ 51.413477] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: yes
<7>[ 51.413571] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: yes
<7>[ 51.413661] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: yes
<7>[ 51.413750] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no
<7>[ 51.413842] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: yes
<7>[ 51.413930] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes
<7>[ 51.414018] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no
<7>[ 51.414107] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes
<7>[ 51.414195] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes
<7>[ 51.414283] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: yes
<7>[ 51.414393] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: no
<7>[ 51.414483] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no
<7>[ 51.414571] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no
<7>[ 51.414658] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no
<7>[ 51.414744] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no
<7>[ 51.414830] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled
<7>[ 51.414918] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 400003
<7>[ 51.415008] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 8
<7>[ 51.415097] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: geometry dss mask=00000000,000000ff
<7>[ 51.415186] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: compute dss mask=00000000,000000ff
<7>[ 51.415284] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 128
<7>[ 51.415375] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 16
<7>[ 51.415464] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no
<7>[ 51.415554] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no
<7>[ 51.415640] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: no
<7>[ 51.415726] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 4041400
<7>[ 51.415813] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 8
<7>[ 51.415900] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: geometry dss mask=00000000,0000ff00
<7>[ 51.415987] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: compute dss mask=00000000,0000ff00
<7>[ 51.416077] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 128
<7>[ 51.416165] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 16
<7>[ 51.416254] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no
<7>[ 51.416362] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no
<7>[ 51.416449] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: no
<6>[ 51.416537] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled
<6>[ 51.416537] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled
<6>[ 51.416538] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled
<7>[ 51.418278] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:250:DP-1] disconnected
<7>[ 51.418297] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:262:HDMI-A-1]
<7>[ 51.418310] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:262:HDMI-A-1]
<7>[ 51.423184] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:262:HDMI-A-1] disconnected
<7>[ 51.423194] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:268:DP-2]
<7>[ 51.423201] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:268:DP-2]
<7>[ 51.423550] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 51.423753] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:268:DP-2] disconnected
<7>[ 51.423761] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:277:HDMI-A-2]
<7>[ 51.423768] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:277:HDMI-A-2]
<7>[ 51.424019] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy)
<7>[ 51.429117] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:277:HDMI-A-2] disconnected
<7>[ 51.429127] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:281:DP-3]
<7>[ 51.429134] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:281:DP-3]
<7>[ 51.429365] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 51.429571] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:281:DP-3] disconnected
<7>[ 51.429580] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:290:DP-4]
<7>[ 51.429588] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:290:DP-4]
<7>[ 51.429796] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt)
<7>[ 51.429970] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:290:DP-4] disconnected
<7>[ 51.429977] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:241:eDP-1] enabled? yes
<7>[ 51.429984] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:250:DP-1] enabled? no
<7>[ 51.429985] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:HDMI-A-1] enabled? no
<7>[ 51.429987] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:268:DP-2] enabled? no
<7>[ 51.429988] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:277:HDMI-A-2] enabled? no
<7>[ 51.429989] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:281:DP-3] enabled? no
<7>[ 51.429990] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:290:DP-4] enabled? no
<7>[ 51.430096] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 51.430111] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:241:eDP-1] found preferred mode: 2880x1800
<7>[ 51.430112] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7>[ 51.430138] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 51.432503] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7>[ 51.443218] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]]
<7>[ 51.443236] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 51.443469] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:241:eDP-1]
<7>[ 51.443482] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:241:eDP-1]
<7>[ 51.444771] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 51.446851] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 51.446987] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7>[ 51.447115] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7>[ 51.447328] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7>[ 51.447333] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] ELD monitor
<7>[ 51.447339] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] ELD size 20, SAD count 0
<7>[ 51.447356] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] VRR capable: no
<7>[ 51.447468] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 51.448370] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 51.448496] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 51.450440] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:241:eDP-1] probed modes:
<7>[ 51.450456] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7>[ 51.450465] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:250:DP-1]
<7>[ 51.450474] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:250:DP-1]
<7>[ 51.454631] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:250:DP-1] disconnected
<7>[ 51.454641] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:262:HDMI-A-1]
<7>[ 51.454648] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:262:HDMI-A-1]
<7>[ 51.459529] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:262:HDMI-A-1] disconnected
<7>[ 51.459539] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:268:DP-2]
<7>[ 51.459546] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:268:DP-2]
<7>[ 51.459881] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:268:DP-2] disconnected
<7>[ 51.459889] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:277:HDMI-A-2]
<7>[ 51.459896] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:277:HDMI-A-2]
<7>[ 51.464478] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:277:HDMI-A-2] disconnected
<7>[ 51.464488] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:281:DP-3]
<7>[ 51.464495] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:281:DP-3]
<7>[ 51.464894] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:281:DP-3] disconnected
<7>[ 51.464903] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:290:DP-4]
<7>[ 51.464911] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:290:DP-4]
<7>[ 51.465134] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:290:DP-4] disconnected
<7>[ 51.465141] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:241:eDP-1] enabled? yes
<7>[ 51.465144] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:250:DP-1] enabled? no
<7>[ 51.465145] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:HDMI-A-1] enabled? no
<7>[ 51.465147] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:268:DP-2] enabled? no
<7>[ 51.465148] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:277:HDMI-A-2] enabled? no
<7>[ 51.465149] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:281:DP-3] enabled? no
<7>[ 51.465150] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:290:DP-4] enabled? no
<7>[ 51.465226] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 51.465240] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:241:eDP-1] found preferred mode: 2880x1800
<7>[ 51.465241] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7>[ 51.465267] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 51.476837] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7>[ 51.478983] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7>[ 51.481371] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]
<7>[ 51.499121] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7>[ 51.499176] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7>[ 51.501068] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:508
<7>[ 51.516713] i915 0000:00:02.0: [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=9600/192000
<7>[ 51.516943] i915 0000:00:02.0: [drm:intel_panel_actually_set_backlight [i915]] [CONNECTOR:241:eDP-1] set backlight level = 13892
<7>[ 51.532109] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7>[ 51.532199] [IGT] i915_module_load: finished subtest load, SUCCESS
<7>[ 51.532267] [IGT] i915_module_load: exiting, ret=0
<7>[ 51.602320] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7>[ 52.469990] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected)
<7>[ 52.470010] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 52.470933] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 52.470967] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected)
<7>[ 53.921215] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 turning VDD off
<7>[ 53.921653] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
<7>[ 53.922125] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7>[ 53.922726] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7>[ 53.923096] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7>[ 55.683021] i915 0000:00:02.0: [drm:fwtable_write32 [i915]] Unclaimed access detected before write to register 0x60910