<5>[ 0.000000] Linux version 6.12.0-CI_DRM_15720-gf8f85a38f6c7+ (kbuild2@gfx-ci) (gcc (Ubuntu 13.2.0-23ubuntu4) 13.2.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Tue Nov 19 13:30:17 UTC 2024
<6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/sda2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,snd_hda_intel ro
<6>[ 0.000000] KERNEL supported cpus:
<6>[ 0.000000] Intel GenuineIntel
<6>[ 0.000000] AMD AuthenticAMD
<6>[ 0.000000] Hygon HygonGenuine
<6>[ 0.000000] Centaur CentaurHauls
<6>[ 0.000000] zhaoxin Shanghai
<6>[ 0.000000] BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ede6fff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000003ede7000-0x000000003ee1efff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x000000003ee1f000-0x000000003ee27fff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000003ee28000-0x000000003ee6efff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x000000003ee6f000-0x000000003eebcfff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000003eebd000-0x000000003eebefff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x000000003eebf000-0x000000003ef41fff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000003ef42000-0x000000003efbefff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x000000003efbf000-0x000000003efeefff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000003efef000-0x000000003effefff] ACPI data
<6>[ 0.000000] BIOS-e820: [mem 0x000000003efff000-0x000000003effffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000fff03fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fffff000-0x00000000ffffffff] reserved
<6>[ 0.000000] NX (Execute Disable) protection: active
<6>[ 0.000000] APIC: Static calls initialized
<7>[ 0.000000] e820: update [mem 0x3d320018-0x3d330057] usable ==> usable
<6>[ 0.000000] extended physical RAM map:
<6>[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000008efff] usable
<6>[ 0.000000] reserve setup_data: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
<6>[ 0.000000] reserve setup_data: [mem 0x0000000000090000-0x000000000009ffff] usable
<6>[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000003d320017] usable
<6>[ 0.000000] reserve setup_data: [mem 0x000000003d320018-0x000000003d330057] usable
<6>[ 0.000000] reserve setup_data: [mem 0x000000003d330058-0x000000003ede6fff] usable
<6>[ 0.000000] reserve setup_data: [mem 0x000000003ede7000-0x000000003ee1efff] reserved
<6>[ 0.000000] reserve setup_data: [mem 0x000000003ee1f000-0x000000003ee27fff] usable
<6>[ 0.000000] reserve setup_data: [mem 0x000000003ee28000-0x000000003ee6efff] reserved
<6>[ 0.000000] reserve setup_data: [mem 0x000000003ee6f000-0x000000003eebcfff] usable
<6>[ 0.000000] reserve setup_data: [mem 0x000000003eebd000-0x000000003eebefff] reserved
<6>[ 0.000000] reserve setup_data: [mem 0x000000003eebf000-0x000000003ef41fff] usable
<6>[ 0.000000] reserve setup_data: [mem 0x000000003ef42000-0x000000003efbefff] ACPI NVS
<6>[ 0.000000] reserve setup_data: [mem 0x000000003efbf000-0x000000003efeefff] usable
<6>[ 0.000000] reserve setup_data: [mem 0x000000003efef000-0x000000003effefff] ACPI data
<6>[ 0.000000] reserve setup_data: [mem 0x000000003efff000-0x000000003effffff] usable
<6>[ 0.000000] reserve setup_data: [mem 0x00000000fff00000-0x00000000fff03fff] reserved
<6>[ 0.000000] reserve setup_data: [mem 0x00000000fffff000-0x00000000ffffffff] reserved
<6>[ 0.000000] efi: EFI v2.0 by
<6>[ 0.000000] efi: ACPI 2.0=0x3effe014 SMBIOS=0x3eebe000 MOKvar=0x3ede7000
<6>[ 0.000000] efi: Not removing mem112: MMIO range=[0xfff00000-0xfff03fff] (16KB) from e820 map
<6>[ 0.000000] efi: Not removing mem113: MMIO range=[0xfffff000-0xffffffff] (4KB) from e820 map
<6>[ 0.000000] SMBIOS 2.5 present.
<6>[ 0.000000] DMI: /D510MO, BIOS MOPNV10J.86A.0311.2010.0802.2346 08/02/2010
<6>[ 0.000000] DMI: Memory slots populated: 2/2
<6>[ 0.000000] tsc: Fast TSC calibration using PIT
<6>[ 0.000000] tsc: Detected 1666.662 MHz processor
<7>[ 0.003034] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[ 0.003049] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[ 0.003076] last_pfn = 0x3f000 max_arch_pfn = 0x400000000
<6>[ 0.003095] MTRR map: 8 entries (4 fixed + 4 variable; max 18), built from 7 variable MTRRs
<6>[ 0.003103] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
<6>[ 0.024186] printk: log_buf_len: 1048576 bytes
<6>[ 0.024196] printk: early log buf free: 257760(98%)
<6>[ 0.024201] Secure boot disabled
<6>[ 0.024211] ACPI: Early table checksum verification disabled
<6>[ 0.024229] ACPI: RSDP 0x000000003EFFE014 000024 (v02 INTEL )
<6>[ 0.024246] ACPI: XSDT 0x000000003EFFE120 00004C (v01 INTEL MOPNV10J 00000137 01000013)
<6>[ 0.024269] ACPI: FACP 0x000000003EFFD000 0000F4 (v03 INTEL MOPNV10J 00000137 MSFT 0100000D)
<4>[ 0.024289] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20240827/tbfadt-560)
<4>[ 0.024302] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/24 (20240827/tbfadt-560)
<4>[ 0.024313] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20240827/tbfadt-665)
<4>[ 0.024323] ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 24, using default 32 (20240827/tbfadt-665)
<6>[ 0.024339] ACPI: DSDT 0x000000003EFF9000 0039A2 (v01 INTEL MOPNV10J 00000137 MSFT 0100000D)
<6>[ 0.024357] ACPI: FACS 0x000000003EF87000 000040
<6>[ 0.024371] ACPI: FACS 0x000000003EF87000 000040
<6>[ 0.024385] ACPI: APIC 0x000000003EFF8000 000084 (v02 INTEL MOPNV10J 00000137 MSFT 0100000D)
<6>[ 0.024402] ACPI: MCFG 0x000000003EFF7000 00003C (v01 INTEL MOPNV10J 00000137 MSFT 0100000D)
<6>[ 0.024419] ACPI: HPET 0x000000003EFF6000 000038 (v01 INTEL MOPNV10J 00000137 MSFT 0100000D)
<6>[ 0.024435] ACPI: SSDT 0x000000003EFF2000 00377C (v01 INTEL SSDT PM 00000137 MSFT 0100000D)
<6>[ 0.024449] ACPI: Reserving FACP table memory at [mem 0x3effd000-0x3effd0f3]
<6>[ 0.024457] ACPI: Reserving DSDT table memory at [mem 0x3eff9000-0x3effc9a1]
<6>[ 0.024463] ACPI: Reserving FACS table memory at [mem 0x3ef87000-0x3ef8703f]
<6>[ 0.024468] ACPI: Reserving FACS table memory at [mem 0x3ef87000-0x3ef8703f]
<6>[ 0.024472] ACPI: Reserving APIC table memory at [mem 0x3eff8000-0x3eff8083]
<6>[ 0.024477] ACPI: Reserving MCFG table memory at [mem 0x3eff7000-0x3eff703b]
<6>[ 0.024482] ACPI: Reserving HPET table memory at [mem 0x3eff6000-0x3eff6037]
<6>[ 0.024487] ACPI: Reserving SSDT table memory at [mem 0x3eff2000-0x3eff577b]
<6>[ 0.025099] No NUMA configuration found
<6>[ 0.025107] Faking a node at [mem 0x0000000000000000-0x000000003effffff]
<6>[ 0.025175] NODE_DATA(0) allocated [mem 0x3efc3fc0-0x3efeefff]
<6>[ 0.026315] Zone ranges:
<6>[ 0.026324] DMA [mem 0x0000000000001000-0x0000000000ffffff]
<6>[ 0.026333] DMA32 [mem 0x0000000001000000-0x000000003effffff]
<6>[ 0.026340] Normal empty
<6>[ 0.026345] Device empty
<6>[ 0.026350] Movable zone start for each node
<6>[ 0.026359] Early memory node ranges
<6>[ 0.026361] node 0: [mem 0x0000000000001000-0x000000000008efff]
<6>[ 0.026367] node 0: [mem 0x0000000000090000-0x000000000009ffff]
<6>[ 0.026372] node 0: [mem 0x0000000000100000-0x000000003ede6fff]
<6>[ 0.026378] node 0: [mem 0x000000003ee1f000-0x000000003ee27fff]
<6>[ 0.026383] node 0: [mem 0x000000003ee6f000-0x000000003eebcfff]
<6>[ 0.026388] node 0: [mem 0x000000003eebf000-0x000000003ef41fff]
<6>[ 0.026393] node 0: [mem 0x000000003efbf000-0x000000003efeefff]
<6>[ 0.026398] node 0: [mem 0x000000003efff000-0x000000003effffff]
<6>[ 0.026404] Initmem setup node 0 [mem 0x0000000000001000-0x000000003effffff]
<6>[ 0.026453] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[ 0.026463] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[ 0.026630] On node 0, zone DMA: 96 pages in unavailable ranges
<6>[ 0.036566] On node 0, zone DMA32: 56 pages in unavailable ranges
<6>[ 0.036617] On node 0, zone DMA32: 71 pages in unavailable ranges
<6>[ 0.036630] On node 0, zone DMA32: 2 pages in unavailable ranges
<6>[ 0.036705] On node 0, zone DMA32: 125 pages in unavailable ranges
<6>[ 0.036720] On node 0, zone DMA32: 16 pages in unavailable ranges
<6>[ 0.039210] On node 0, zone DMA32: 4096 pages in unavailable ranges
<6>[ 0.039228] Reserving Intel graphics memory at [mem 0x3f800000-0x3fffffff]
<6>[ 0.039526] ACPI: PM-Timer IO Port: 0x408
<6>[ 0.039566] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
<6>[ 0.039574] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
<6>[ 0.039579] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
<6>[ 0.039584] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
<6>[ 0.039665] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
<6>[ 0.039684] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[ 0.039692] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>[ 0.039712] ACPI: Using ACPI (MADT) for SMP configuration information
<6>[ 0.039719] ACPI: HPET id: 0x8086a201 base: 0xfed00000
<6>[ 0.039771] CPU topo: Max. logical packages: 1
<6>[ 0.039776] CPU topo: Max. logical dies: 1
<6>[ 0.039779] CPU topo: Max. dies per package: 1
<6>[ 0.039806] CPU topo: Max. threads per core: 2
<6>[ 0.039810] CPU topo: Num. cores per package: 2
<6>[ 0.039814] CPU topo: Num. threads per package: 4
<6>[ 0.039817] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
<6>[ 0.039974] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[ 0.039989] PM: hibernation: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
<6>[ 0.040002] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
<6>[ 0.040015] PM: hibernation: Registered nosave memory: [mem 0x3d320000-0x3d320fff]
<6>[ 0.040028] PM: hibernation: Registered nosave memory: [mem 0x3d330000-0x3d330fff]
<6>[ 0.040041] PM: hibernation: Registered nosave memory: [mem 0x3ede7000-0x3ee1efff]
<6>[ 0.040054] PM: hibernation: Registered nosave memory: [mem 0x3ee28000-0x3ee6efff]
<6>[ 0.040068] PM: hibernation: Registered nosave memory: [mem 0x3eebd000-0x3eebefff]
<6>[ 0.040081] PM: hibernation: Registered nosave memory: [mem 0x3ef42000-0x3efbefff]
<6>[ 0.040095] PM: hibernation: Registered nosave memory: [mem 0x3efef000-0x3effefff]
<6>[ 0.040109] [mem 0x40000000-0xffefffff] available for PCI devices
<6>[ 0.040118] Booting paravirtualized kernel on bare hardware
<6>[ 0.040126] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
<6>[ 0.040198] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
<6>[ 0.042354] percpu: Embedded 91 pages/cpu s249856 r8192 d114688 u524288
<7>[ 0.042409] pcpu-alloc: s249856 r8192 d114688 u524288 alloc=1*2097152
<7>[ 0.042422] pcpu-alloc: [0] 0 1 2 3
<5>[ 0.042564] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/sda2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,snd_hda_intel ro
<5>[ 0.043324] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space.
<6>[ 0.043899] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
<6>[ 0.044244] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.044469] Fallback order for Node 0: 0
<6>[ 0.044490] Built 1 zonelists, mobility grouping on. Total pages: 257680
<6>[ 0.044497] Policy zone: DMA32
<6>[ 0.044570] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
<6>[ 0.044577] stackdepot: allocating hash table via alloc_large_system_hash
<6>[ 0.044602] stackdepot hash table entries: 65536 (order: 8, 1048576 bytes, linear)
<4>[ 0.085271] **********************************************************
<4>[ 0.085282] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.085285] ** **
<4>[ 0.085287] ** This system shows unhashed kernel memory addresses **
<4>[ 0.085290] ** via the console, logs, and other interfaces. This **
<4>[ 0.085293] ** might reduce the security of your system. **
<4>[ 0.085295] ** **
<4>[ 0.085298] ** If you see this message and you are not debugging **
<4>[ 0.085301] ** the kernel, report this immediately to your system **
<4>[ 0.085303] ** administrator! **
<4>[ 0.085306] ** **
<4>[ 0.085309] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.085311] **********************************************************
<6>[ 0.137842] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
<6>[ 0.144414] ftrace: allocating 59411 entries in 233 pages
<6>[ 0.168336] ftrace: allocated 233 pages with 5 groups
<6>[ 0.178815] Dynamic Preempt: voluntary
<6>[ 0.184136] Running RCU self tests
<6>[ 0.184145] Running RCU synchronous self tests
<6>[ 0.184232] rcu: Preemptible hierarchical RCU implementation.
<6>[ 0.184237] rcu: RCU lockdep checking is enabled.
<6>[ 0.184239] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
<6>[ 0.184247] Trampoline variant of Tasks RCU enabled.
<6>[ 0.184249] Rude variant of Tasks RCU enabled.
<6>[ 0.184251] Tracing variant of Tasks RCU enabled.
<6>[ 0.184254] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
<6>[ 0.184258] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
<6>[ 0.184656] Running RCU synchronous self tests
<6>[ 0.184721] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
<6>[ 0.184755] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
<6>[ 0.184786] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
<6>[ 0.334549] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
<6>[ 0.337640] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[ 0.339333] Console: colour dummy device 80x25
<6>[ 0.339412] printk: legacy console [tty0] enabled
<4>[ 0.352330] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<4>[ 0.352434] ... MAX_LOCKDEP_SUBCLASSES: 8
<4>[ 0.352490] ... MAX_LOCK_DEPTH: 48
<4>[ 0.352545] ... MAX_LOCKDEP_KEYS: 8192
<4>[ 0.352602] ... CLASSHASH_SIZE: 4096
<4>[ 0.352659] ... MAX_LOCKDEP_ENTRIES: 524288
<4>[ 0.352718] ... MAX_LOCKDEP_CHAINS: 524288
<4>[ 0.352776] ... CHAINHASH_SIZE: 262144
<4>[ 0.352835] memory used by lock dependency info: 54145 kB
<4>[ 0.352902] memory used for stack traces: 4224 kB
<4>[ 0.352963] per task-struct memory footprint: 1920 bytes
<6>[ 0.353995] ACPI: Core revision 20240827
<6>[ 0.358058] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
<6>[ 0.358361] APIC: Switch to symmetric I/O mode setup
<6>[ 0.361320] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
<6>[ 0.366281] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1806220cd04, max_idle_ns: 440795235813 ns
<6>[ 0.366473] Calibrating delay loop (skipped), value calculated using timer frequency.. 3333.32 BogoMIPS (lpj=1666662)
<6>[ 0.366633] CPU0: Thermal monitoring enabled (TM1)
<6>[ 0.367006] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
<6>[ 0.367083] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
<6>[ 0.367177] process: using mwait in idle threads
<6>[ 0.367478] x86/fpu: x87 FPU will use FXSAVE
<6>[ 0.527158] Freeing SMP alternatives memory: 48K
<6>[ 0.527265] pid_max: default: 32768 minimum: 301
<6>[ 0.560877] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm
<6>[ 0.562454] landlock: Up and running.
<6>[ 0.562510] Yama: becoming mindful.
<6>[ 0.564905] AppArmor: AppArmor initialized
<6>[ 0.568879] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
<6>[ 0.569004] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
<6>[ 0.583445] Running RCU synchronous self tests
<6>[ 0.583526] Running RCU synchronous self tests
<6>[ 0.686671] smpboot: CPU0: Intel(R) Atom(TM) CPU D510 @ 1.66GHz (family: 0x6, model: 0x1c, stepping: 0xa)
<6>[ 0.699218] Running RCU Tasks wait API self tests
<6>[ 0.801694] Running RCU Tasks Rude wait API self tests
<6>[ 0.802257] Running RCU Tasks Trace wait API self tests
<6>[ 0.802577] Performance Events: PEBS fmt0+, Atom events, 8-deep LBR, Intel PMU driver.
<6>[ 0.802811] ... version: 3
<6>[ 0.802867] ... bit width: 40
<6>[ 0.802919] ... generic registers: 2
<6>[ 0.802970] ... value mask: 000000ffffffffff
<6>[ 0.803032] ... max period: 000000007fffffff
<6>[ 0.803094] ... fixed-purpose events: 3
<6>[ 0.803145] ... event mask: 0000000700000003
<6>[ 0.804584] signal: max sigframe size: 1440
<6>[ 0.805958] rcu: Hierarchical SRCU implementation.
<6>[ 0.806034] rcu: Max phase no-delay instances is 400.
<6>[ 0.809625] Callback from call_rcu_tasks_trace() invoked.
<6>[ 0.809998] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
<6>[ 0.842966] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
<6>[ 0.846361] smp: Bringing up secondary CPUs ...
<6>[ 0.855496] smpboot: x86: Booting SMP configuration:
<6>[ 0.855617] .... node #0, CPUs: #2 #1 #3
<6>[ 0.879571] smp: Brought up 1 node, 4 CPUs
<6>[ 0.879694] smpboot: Total of 4 processors activated (13333.29 BogoMIPS)
<6>[ 0.893396] Memory: 876964K/1030720K available (24576K kernel code, 5563K rwdata, 9188K rodata, 5596K init, 68448K bss, 140612K reserved, 0K cma-reserved)
<6>[ 0.898641] devtmpfs: initialized
<6>[ 0.902146] x86/mm: Memory block size: 128MB
<6>[ 0.931988] ACPI: PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
<6>[ 0.932180] ACPI: PM: Registering ACPI NVS region [mem 0x3ef42000-0x3efbefff] (512000 bytes)
<6>[ 0.938735] Running RCU synchronous self tests
<6>[ 0.938900] Running RCU synchronous self tests
<6>[ 0.939556] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[ 0.939632] futex hash table entries: 1024 (order: 5, 131072 bytes, linear)
<6>[ 0.944657] pinctrl core: initialized pinctrl subsystem
<6>[ 0.950449] PM: RTC time: 15:12:40, date: 2024-11-19
<6>[ 0.964909] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[ 0.973909] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
<6>[ 0.974265] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[ 0.974636] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[ 0.975684] audit: initializing netlink subsys (disabled)
<5>[ 0.977784] audit: type=2000 audit(1732029160.616:1): state=initialized audit_enabled=0 res=1
<6>[ 0.988097] thermal_sys: Registered thermal governor 'fair_share'
<6>[ 0.988122] thermal_sys: Registered thermal governor 'bang_bang'
<6>[ 0.988208] thermal_sys: Registered thermal governor 'step_wise'
<6>[ 0.988281] thermal_sys: Registered thermal governor 'user_space'
<6>[ 0.988353] thermal_sys: Registered thermal governor 'power_allocator'
<6>[ 0.989229] EISA bus registered
<6>[ 0.989624] cpuidle: using governor ladder
<6>[ 0.990502] cpuidle: using governor menu
<6>[ 0.991897] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
<6>[ 0.992000] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[ 0.999319] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f]
<6>[ 0.999463] PCI: not using ECAM ([mem 0xf8000000-0xfbffffff] not reserved)
<6>[ 0.999567] PCI: Using configuration type 1 for base access
<4>[ 1.000284] mtrr: your CPUs had inconsistent variable MTRR settings
<6>[ 1.000362] mtrr: probably your BIOS does not setup all CPUs.
<6>[ 1.000445] mtrr: corrected configuration.
<6>[ 1.002697] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
<6>[ 1.009482] Callback from call_rcu_tasks() invoked.
<6>[ 1.019673] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
<6>[ 1.019805] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
<6>[ 1.078714] raid6: sse2x4 gen() 1791 MB/s
<6>[ 1.095719] raid6: sse2x2 gen() 1530 MB/s
<6>[ 1.112714] raid6: sse2x1 gen() 1144 MB/s
<6>[ 1.112802] raid6: using algorithm sse2x4 gen() 1791 MB/s
<6>[ 1.129727] raid6: .... xor() 773 MB/s, rmw enabled
<6>[ 1.129803] raid6: using ssse3x2 recovery algorithm
<6>[ 1.137981] fbcon: Taking over console
<6>[ 1.139712] ACPI: Added _OSI(Module Device)
<6>[ 1.139785] ACPI: Added _OSI(Processor Device)
<6>[ 1.139847] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[ 1.139909] ACPI: Added _OSI(Processor Aggregator Device)
<6>[ 1.953577] ACPI: 2 ACPI AML tables successfully acquired and loaded
<5>[ 2.039255] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
<6>[ 2.132028] ACPI: Interpreter enabled
<6>[ 2.133789] ACPI: PM: (supports S0 S1 S3 S4 S5)
<6>[ 2.133884] ACPI: Using IOAPIC for interrupt routing
<6>[ 2.143918] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f]
<6>[ 2.156813] PCI: ECAM [mem 0xf8000000-0xfbffffff] reserved as ACPI motherboard resource
<6>[ 2.157094] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[ 2.157197] PCI: Using E820 reservations for host bridge windows
<6>[ 2.169590] ACPI: Enabled 11 GPEs in block 00 to 1F
<6>[ 2.735106] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
<6>[ 2.735395] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
<6>[ 2.767242] PCI host bridge to bus 0000:00
<6>[ 2.767824] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
<6>[ 2.767942] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
<6>[ 2.768065] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[ 2.768237] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff window]
<6>[ 2.768515] pci_bus 0000:00: root bus resource [bus 00-3f]
<6>[ 2.768947] pci 0000:00:00.0: [8086:a000] type 00 class 0x060000 conventional PCI endpoint
<6>[ 2.771764] pci 0000:00:02.0: [8086:a001] type 00 class 0x030000 conventional PCI endpoint
<6>[ 2.771903] pci 0000:00:02.0: BAR 0 [mem 0xf0200000-0xf027ffff]
<6>[ 2.771993] pci 0000:00:02.0: BAR 1 [io 0x20c0-0x20c7]
<6>[ 2.772090] pci 0000:00:02.0: BAR 2 [mem 0xe0000000-0xefffffff pref]
<6>[ 2.772183] pci 0000:00:02.0: BAR 3 [mem 0xf0100000-0xf01fffff]
<6>[ 2.772567] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6>[ 2.780328] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint
<6>[ 2.780837] pci 0000:00:1b.0: BAR 0 [mem 0xf0280000-0xf0283fff 64bit]
<6>[ 2.781491] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
<6>[ 2.788789] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 PCIe Root Port
<6>[ 2.788971] pci 0000:00:1c.0: PCI bridge to [bus 01]
<6>[ 2.789059] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
<6>[ 2.789168] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
<6>[ 2.789751] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>[ 2.796661] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400 PCIe Root Port
<6>[ 2.796827] pci 0000:00:1c.1: PCI bridge to [bus 02]
<6>[ 2.797381] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
<6>[ 2.804355] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400 PCIe Root Port
<6>[ 2.804505] pci 0000:00:1c.2: PCI bridge to [bus 03]
<6>[ 2.805068] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
<6>[ 2.812358] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400 PCIe Root Port
<6>[ 2.812514] pci 0000:00:1c.3: PCI bridge to [bus 04]
<6>[ 2.813077] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
<6>[ 2.820150] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 conventional PCI endpoint
<6>[ 2.820370] pci 0000:00:1d.0: BAR 4 [io 0x2080-0x209f]
<6>[ 2.827278] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 conventional PCI endpoint
<6>[ 2.827531] pci 0000:00:1d.1: BAR 4 [io 0x2060-0x207f]
<6>[ 2.834289] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 conventional PCI endpoint
<6>[ 2.834883] pci 0000:00:1d.2: BAR 4 [io 0x2040-0x205f]
<6>[ 2.841662] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 conventional PCI endpoint
<6>[ 2.841883] pci 0000:00:1d.3: BAR 4 [io 0x2020-0x203f]
<6>[ 2.849149] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 conventional PCI endpoint
<6>[ 2.849302] pci 0000:00:1d.7: BAR 0 [mem 0xf0284400-0xf02847ff]
<6>[ 2.849818] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
<6>[ 2.856566] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 conventional PCI bridge
<6>[ 2.856734] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
<6>[ 2.863990] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100 conventional PCI endpoint
<6>[ 2.864538] pci 0000:00:1f.0: [Firmware Bug]: Tiger Point LPC.BM_STS cleared
<6>[ 2.871806] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601 conventional PCI endpoint
<6>[ 2.871958] pci 0000:00:1f.2: BAR 0 [io 0x20b8-0x20bf]
<6>[ 2.872055] pci 0000:00:1f.2: BAR 1 [io 0x20cc-0x20cf]
<6>[ 2.872154] pci 0000:00:1f.2: BAR 2 [io 0x20b0-0x20b7]
<6>[ 2.872241] pci 0000:00:1f.2: BAR 3 [io 0x20c8-0x20cb]
<6>[ 2.872327] pci 0000:00:1f.2: BAR 4 [io 0x20a0-0x20af]
<6>[ 2.872442] pci 0000:00:1f.2: BAR 5 [mem 0xf0284000-0xf02843ff]
<6>[ 2.872846] pci 0000:00:1f.2: PME# supported from D3hot
<6>[ 2.879567] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 conventional PCI endpoint
<6>[ 2.879766] pci 0000:00:1f.3: BAR 4 [io 0x2000-0x201f]
<6>[ 2.883651] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
<6>[ 2.883797] pci 0000:01:00.0: BAR 0 [io 0x1000-0x10ff]
<6>[ 2.883913] pci 0000:01:00.0: BAR 2 [mem 0xf0004000-0xf0004fff 64bit pref]
<6>[ 2.884024] pci 0000:01:00.0: BAR 4 [mem 0xf0000000-0xf0003fff 64bit pref]
<6>[ 2.884149] pci 0000:01:00.0: ROM [mem 0xfffe0000-0xffffffff pref]
<6>[ 2.885166] pci 0000:01:00.0: supports D1 D2
<6>[ 2.885234] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.888587] pci 0000:00:1c.0: PCI bridge to [bus 01]
<6>[ 2.890032] pci 0000:00:1c.1: PCI bridge to [bus 02]
<6>[ 2.891384] pci 0000:00:1c.2: PCI bridge to [bus 03]
<6>[ 2.892771] pci 0000:00:1c.3: PCI bridge to [bus 04]
<6>[ 2.892990] pci_bus 0000:05: extended config space not accessible
<6>[ 2.894243] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
<6>[ 2.894392] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
<6>[ 2.894559] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
<6>[ 2.894689] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
<6>[ 2.894824] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xf7ffffff window] (subtractive decode)
<6>[ 2.904062] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
<6>[ 2.912512] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
<6>[ 2.912607] ACPI: PCI: Interrupt link LNKB disabled
<6>[ 2.921271] ACPI: PCI: Interrupt link LNKC configured for IRQ 9
<6>[ 2.929699] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
<6>[ 2.937634] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
<6>[ 2.937725] ACPI: PCI: Interrupt link LNKE disabled
<6>[ 2.945870] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
<6>[ 2.945962] ACPI: PCI: Interrupt link LNKF disabled
<6>[ 2.953604] ACPI: PCI: Interrupt link LNKG configured for IRQ 9
<6>[ 2.961362] ACPI: PCI: Interrupt link LNKH configured for IRQ 10
<6>[ 3.009554] iommu: Default domain type: Translated
<6>[ 3.009654] iommu: DMA domain TLB invalidation policy: lazy mode
<5>[ 3.029456] SCSI subsystem initialized
<7>[ 3.031612] libata version 3.00 loaded.
<6>[ 3.033662] ACPI: bus type USB registered
<6>[ 3.034930] usbcore: registered new interface driver usbfs
<6>[ 3.035659] usbcore: registered new interface driver hub
<6>[ 3.036271] usbcore: registered new device driver usb
<6>[ 3.038282] pps_core: LinuxPPS API ver. 1 registered
<6>[ 3.038357] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[ 3.038699] PTP clock support registered
<6>[ 3.042642] EDAC MC: Ver: 3.0.0
<6>[ 3.050662] efivars: Registered efivars operations
<6>[ 3.068639] NetLabel: Initializing
<6>[ 3.068708] NetLabel: domain hash size = 128
<6>[ 3.068764] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
<6>[ 3.069896] NetLabel: unlabeled traffic allowed by default
<6>[ 3.070160] mctp: management component transport protocol core
<6>[ 3.070234] NET: Registered PF_MCTP protocol family
<6>[ 3.070798] PCI: Using ACPI for IRQ routing
<7>[ 3.075192] PCI: pci_cache_line_size set to 64 bytes
<7>[ 3.075347] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
<7>[ 3.075466] e820: reserve RAM buffer [mem 0x3d320018-0x3fffffff]
<7>[ 3.075507] e820: reserve RAM buffer [mem 0x3ede7000-0x3fffffff]
<7>[ 3.075558] e820: reserve RAM buffer [mem 0x3ee28000-0x3fffffff]
<7>[ 3.075608] e820: reserve RAM buffer [mem 0x3eebd000-0x3fffffff]
<7>[ 3.075657] e820: reserve RAM buffer [mem 0x3ef42000-0x3fffffff]
<7>[ 3.075706] e820: reserve RAM buffer [mem 0x3efef000-0x3fffffff]
<7>[ 3.075755] e820: reserve RAM buffer [mem 0x3f000000-0x3fffffff]
<6>[ 3.079845] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6>[ 3.079967] pci 0000:00:02.0: vgaarb: bridge control possible
<6>[ 3.080039] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
<6>[ 3.080499] vgaarb: loaded
<6>[ 3.083396] hpet: 3 channels of 0 reserved for per-cpu timers
<6>[ 3.083618] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
<6>[ 3.083716] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
<6>[ 3.087425] clocksource: Switched to clocksource tsc-early
<5>[ 3.177969] VFS: Disk quotas dquot_6.6.0
<6>[ 3.178859] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[ 3.194619] AppArmor: AppArmor Filesystem Enabled
<6>[ 3.195804] pnp: PnP ACPI init
<6>[ 3.200970] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
<6>[ 3.201137] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
<6>[ 3.201273] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
<6>[ 3.201408] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
<6>[ 3.201542] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
<6>[ 3.201833] system 00:00: [mem 0x000c0000-0x000dffff] could not be reserved
<6>[ 3.202003] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
<6>[ 3.202168] system 00:00: [mem 0xfff00000-0xffffffff] could not be reserved
<6>[ 3.220346] system 00:02: [io 0x0500-0x053f] has been reserved
<6>[ 3.220493] system 00:02: [io 0x0400-0x047f] has been reserved
<6>[ 3.220624] system 00:02: [io 0x0680-0x06ff] has been reserved
<6>[ 3.220842] system 00:02: [io 0x0295-0x0296] has been reserved
<6>[ 3.286691] pnp: PnP ACPI: found 7 devices
<6>[ 3.415857] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<6>[ 3.420394] NET: Registered PF_INET protocol family
<6>[ 3.421408] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
<6>[ 3.430968] tcp_listen_portaddr_hash hash table entries: 512 (order: 3, 36864 bytes, linear)
<6>[ 3.431253] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[ 3.432020] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
<6>[ 3.434046] TCP bind hash table entries: 8192 (order: 8, 1179648 bytes, linear)
<6>[ 3.436103] TCP: Hash tables configured (established 8192 bind 8192)
<6>[ 3.437416] UDP hash table entries: 512 (order: 4, 81920 bytes, linear)
<6>[ 3.437985] UDP-Lite hash table entries: 512 (order: 4, 81920 bytes, linear)
<6>[ 3.441648] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[ 3.442329] pci 0000:01:00.0: ROM [mem 0xfffe0000-0xffffffff pref]: can't claim; no compatible bridge window
<6>[ 3.442510] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x001fffff] to [bus 01] add_size 100000 add_align 100000
<6>[ 3.442662] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
<6>[ 3.442854] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
<6>[ 3.443005] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
<6>[ 3.443149] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
<6>[ 3.443274] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
<6>[ 3.443459] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000
<6>[ 3.443603] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
<6>[ 3.443773] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
<6>[ 3.443925] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
<6>[ 3.444524] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd01fffff]: assigned
<6>[ 3.444624] pci 0000:00:1c.1: bridge window [mem 0xd0200000-0xd03fffff]: assigned
<6>[ 3.444720] pci 0000:00:1c.1: bridge window [mem 0xd0400000-0xd05fffff 64bit pref]: assigned
<6>[ 3.444945] pci 0000:00:1c.2: bridge window [mem 0xd0600000-0xd07fffff]: assigned
<6>[ 3.445048] pci 0000:00:1c.2: bridge window [mem 0xd0800000-0xd09fffff 64bit pref]: assigned
<6>[ 3.445149] pci 0000:00:1c.3: bridge window [mem 0xd0a00000-0xd0bfffff]: assigned
<6>[ 3.445242] pci 0000:00:1c.3: bridge window [mem 0xd0c00000-0xd0dfffff 64bit pref]: assigned
<6>[ 3.445345] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]: assigned
<6>[ 3.445429] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]: assigned
<6>[ 3.445513] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]: assigned
<6>[ 3.446080] pci 0000:01:00.0: ROM [mem 0xd0000000-0xd001ffff pref]: assigned
<6>[ 3.446190] pci 0000:00:1c.0: PCI bridge to [bus 01]
<6>[ 3.446262] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
<6>[ 3.446345] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd01fffff]
<6>[ 3.446430] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
<6>[ 3.446531] pci 0000:00:1c.1: PCI bridge to [bus 02]
<6>[ 3.446599] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
<6>[ 3.446680] pci 0000:00:1c.1: bridge window [mem 0xd0200000-0xd03fffff]
<6>[ 3.446805] pci 0000:00:1c.1: bridge window [mem 0xd0400000-0xd05fffff 64bit pref]
<6>[ 3.446908] pci 0000:00:1c.2: PCI bridge to [bus 03]
<6>[ 3.446976] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
<6>[ 3.447057] pci 0000:00:1c.2: bridge window [mem 0xd0600000-0xd07fffff]
<6>[ 3.447142] pci 0000:00:1c.2: bridge window [mem 0xd0800000-0xd09fffff 64bit pref]
<6>[ 3.447243] pci 0000:00:1c.3: PCI bridge to [bus 04]
<6>[ 3.447310] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
<6>[ 3.447391] pci 0000:00:1c.3: bridge window [mem 0xd0a00000-0xd0bfffff]
<6>[ 3.447476] pci 0000:00:1c.3: bridge window [mem 0xd0c00000-0xd0dfffff 64bit pref]
<6>[ 3.447580] pci 0000:00:1e.0: PCI bridge to [bus 05]
<6>[ 3.447670] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
<6>[ 3.447782] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
<6>[ 3.447859] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[ 3.447939] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xf7ffffff window]
<6>[ 3.448020] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
<6>[ 3.448089] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd01fffff]
<6>[ 3.448163] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
<6>[ 3.448249] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
<6>[ 3.448318] pci_bus 0000:02: resource 1 [mem 0xd0200000-0xd03fffff]
<6>[ 3.448392] pci_bus 0000:02: resource 2 [mem 0xd0400000-0xd05fffff 64bit pref]
<6>[ 3.448478] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
<6>[ 3.448547] pci_bus 0000:03: resource 1 [mem 0xd0600000-0xd07fffff]
<6>[ 3.448621] pci_bus 0000:03: resource 2 [mem 0xd0800000-0xd09fffff 64bit pref]
<6>[ 3.448707] pci_bus 0000:04: resource 0 [io 0x5000-0x5fff]
<6>[ 3.448850] pci_bus 0000:04: resource 1 [mem 0xd0a00000-0xd0bfffff]
<6>[ 3.448963] pci_bus 0000:04: resource 2 [mem 0xd0c00000-0xd0dfffff 64bit pref]
<6>[ 3.449066] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
<6>[ 3.449143] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
<6>[ 3.449217] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[ 3.449298] pci_bus 0000:05: resource 7 [mem 0xd0000000-0xf7ffffff window]
<6>[ 3.480677] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x7c0 took 27936 usecs
<6>[ 3.509576] pci 0000:00:1d.1: quirk_usb_early_handoff+0x0/0x7c0 took 27980 usecs
<6>[ 3.539250] pci 0000:00:1d.2: quirk_usb_early_handoff+0x0/0x7c0 took 28835 usecs
<6>[ 3.568557] pci 0000:00:1d.3: quirk_usb_early_handoff+0x0/0x7c0 took 28476 usecs
<6>[ 3.598342] pci 0000:00:1d.7: quirk_usb_early_handoff+0x0/0x7c0 took 28943 usecs
<6>[ 3.598528] PCI: CLS 64 bytes, default 64
<5>[ 3.631272] Initialise system trusted keyrings
<5>[ 3.632113] Key type blacklist registered
<6>[ 3.633894] workingset: timestamp_bits=36 max_order=18 bucket_order=0
<6>[ 3.755903] zbud: loaded
<6>[ 3.774603] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 3.776981] ntfs3: Enabled Linux POSIX ACLs support
<6>[ 3.777061] ntfs3: Read-only LZX/Xpress compression included
<5>[ 3.781471] integrity: Platform Keyring initialized
<5>[ 3.781692] integrity: Machine keyring initialized
<6>[ 3.841843] xor: measuring software checksum speed
<6>[ 3.842447] prefetch64-sse : 6244 MB/sec
<6>[ 3.843204] generic_sse : 4720 MB/sec
<6>[ 3.843268] xor: using function: prefetch64-sse (6244 MB/sec)
<5>[ 3.843346] Key type asymmetric registered
<5>[ 3.843490] Asymmetric key parser 'x509' registered
<6>[ 3.844716] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
<6>[ 3.846718] io scheduler mq-deadline registered
<6>[ 3.853415] ledtrig-cpu: registered to indicate activity on CPUs
<6>[ 3.870440] pcieport 0000:00:1c.1: enabling device (0000 -> 0003)
<6>[ 3.886235] pcieport 0000:00:1c.2: enabling device (0000 -> 0003)
<6>[ 3.901778] pcieport 0000:00:1c.3: enabling device (0000 -> 0003)
<6>[ 3.919674] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<6>[ 3.935308] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
<6>[ 3.938412] ACPI: button: Sleep Button [SLPB]
<6>[ 3.940956] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
<6>[ 3.942815] ACPI: button: Power Button [PWRF]
<6>[ 4.014923] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[ 4.042375] 00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
<6>[ 4.081942] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
<6>[ 4.285832] Linux agpgart interface v0.103
<6>[ 4.290660] ACPI: bus type drm_connector registered
<6>[ 4.431467] loop: module loaded
<6>[ 4.617300] tsc: Refined TSC clocksource calibration: 1666.686 MHz
<6>[ 4.617523] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x180638bc796, max_idle_ns: 440795240246 ns
<6>[ 4.618123] clocksource: Switched to clocksource tsc
<5>[ 4.755601] Key type psk registered
<7>[ 4.769629] ahci 0000:00:1f.2: version 3.0
<6>[ 4.787212] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
<6>[ 4.787358] ahci 0000:00:1f.2: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode
<6>[ 4.787458] ahci 0000:00:1f.2: 2/4 ports implemented (port mask 0x3)
<6>[ 4.787535] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part
<6>[ 4.818618] scsi host0: ahci
<6>[ 4.828290] scsi host1: ahci
<6>[ 4.836375] scsi host2: ahci
<6>[ 4.844585] scsi host3: ahci
<6>[ 4.848922] ata1: SATA max UDMA/133 abar m1024@0xf0284000 port 0xf0284100 irq 24 lpm-pol 3
<6>[ 4.849037] ata2: SATA max UDMA/133 abar m1024@0xf0284000 port 0xf0284180 irq 24 lpm-pol 3
<6>[ 4.849133] ata3: DUMMY
<6>[ 4.849173] ata4: DUMMY
<6>[ 4.860911] tun: Universal TUN/TAP device driver, 1.6
<6>[ 4.885894] ehci-pci 0000:00:1d.7: EHCI Host Controller
<6>[ 4.887099] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
<6>[ 4.887562] ehci-pci 0000:00:1d.7: debug port 1
<6>[ 4.894009] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf0284400
<6>[ 4.899905] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
<6>[ 4.904340] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
<6>[ 4.904527] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 4.904628] usb usb1: Product: EHCI Host Controller
<6>[ 4.904704] usb usb1: Manufacturer: Linux 6.12.0-CI_DRM_15720-gf8f85a38f6c7+ ehci_hcd
<6>[ 4.905497] usb usb1: SerialNumber: 0000:00:1d.7
<6>[ 4.915264] hub 1-0:1.0: USB hub found
<6>[ 4.916036] hub 1-0:1.0: 8 ports detected
<6>[ 4.933686] uhci_hcd 0000:00:1d.0: UHCI Host Controller
<6>[ 4.934549] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
<6>[ 4.934914] uhci_hcd 0000:00:1d.0: detected 2 ports
<6>[ 4.935214] uhci_hcd 0000:00:1d.0: irq 23, io port 0x00002080
<6>[ 4.939386] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12
<6>[ 4.939545] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 4.939642] usb usb2: Product: UHCI Host Controller
<6>[ 4.939711] usb usb2: Manufacturer: Linux 6.12.0-CI_DRM_15720-gf8f85a38f6c7+ uhci_hcd
<6>[ 4.939944] usb usb2: SerialNumber: 0000:00:1d.0
<6>[ 4.947643] hub 2-0:1.0: USB hub found
<6>[ 4.948574] hub 2-0:1.0: 2 ports detected
<6>[ 4.973423] uhci_hcd 0000:00:1d.1: UHCI Host Controller
<6>[ 4.973861] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
<6>[ 4.974050] uhci_hcd 0000:00:1d.1: detected 2 ports
<6>[ 4.974808] uhci_hcd 0000:00:1d.1: irq 19, io port 0x00002060
<6>[ 4.978115] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12
<6>[ 4.978238] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 4.978332] usb usb3: Product: UHCI Host Controller
<6>[ 4.978400] usb usb3: Manufacturer: Linux 6.12.0-CI_DRM_15720-gf8f85a38f6c7+ uhci_hcd
<6>[ 4.978498] usb usb3: SerialNumber: 0000:00:1d.1
<6>[ 4.985971] hub 3-0:1.0: USB hub found
<6>[ 4.986422] hub 3-0:1.0: 2 ports detected
<6>[ 5.008599] uhci_hcd 0000:00:1d.2: UHCI Host Controller
<6>[ 5.008971] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
<6>[ 5.009232] uhci_hcd 0000:00:1d.2: detected 2 ports
<6>[ 5.009684] uhci_hcd 0000:00:1d.2: irq 18, io port 0x00002040
<6>[ 5.012960] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12
<6>[ 5.013083] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 5.013177] usb usb4: Product: UHCI Host Controller
<6>[ 5.013246] usb usb4: Manufacturer: Linux 6.12.0-CI_DRM_15720-gf8f85a38f6c7+ uhci_hcd
<6>[ 5.013344] usb usb4: SerialNumber: 0000:00:1d.2
<6>[ 5.020446] hub 4-0:1.0: USB hub found
<6>[ 5.021159] hub 4-0:1.0: 2 ports detected
<6>[ 5.042930] uhci_hcd 0000:00:1d.3: UHCI Host Controller
<6>[ 5.043202] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
<6>[ 5.043384] uhci_hcd 0000:00:1d.3: detected 2 ports
<6>[ 5.043923] uhci_hcd 0000:00:1d.3: irq 16, io port 0x00002020
<6>[ 5.047112] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12
<6>[ 5.047236] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 5.047330] usb usb5: Product: UHCI Host Controller
<6>[ 5.047399] usb usb5: Manufacturer: Linux 6.12.0-CI_DRM_15720-gf8f85a38f6c7+ uhci_hcd
<6>[ 5.047497] usb usb5: SerialNumber: 0000:00:1d.3
<6>[ 5.054945] hub 5-0:1.0: USB hub found
<6>[ 5.055393] hub 5-0:1.0: 2 ports detected
<6>[ 5.065462] usbcore: registered new interface driver usb-storage
<6>[ 5.067069] usbcore: registered new interface driver usbserial_generic
<6>[ 5.067937] usbserial: USB Serial support registered for generic
<6>[ 5.068536] usbcore: registered new interface driver ftdi_sio
<6>[ 5.069105] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[ 5.069669] usbcore: registered new interface driver pl2303
<6>[ 5.070142] usbserial: USB Serial support registered for pl2303
<6>[ 5.071218] i8042: PNP: No PS/2 controller found.
<6>[ 5.075312] mousedev: PS/2 mouse device common for all mice
<6>[ 5.083313] rtc_cmos 00:01: RTC can wake from S4
<6>[ 5.092298] rtc_cmos 00:01: registered as rtc0
<6>[ 5.092594] rtc_cmos 00:01: setting system clock to 2024-11-19T15:12:45 UTC (1732029165)
<6>[ 5.094402] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
<6>[ 5.095078] i2c_dev: i2c /dev entries driver
<6>[ 5.102984] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0)
<6>[ 5.103096] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
<4>[ 5.103190] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
<6>[ 5.103586] device-mapper: uevent: version 1.0.3
<6>[ 5.107226] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
<6>[ 5.108436] platform eisa.0: Probing EISA bus 0
<4>[ 5.108570] platform eisa.0: EISA: Cannot allocate resource for mainboard
<4>[ 5.108779] platform eisa.0: Cannot allocate resource for EISA slot 1
<4>[ 5.108908] platform eisa.0: Cannot allocate resource for EISA slot 2
<4>[ 5.109033] platform eisa.0: Cannot allocate resource for EISA slot 3
<4>[ 5.109157] platform eisa.0: Cannot allocate resource for EISA slot 4
<4>[ 5.109280] platform eisa.0: Cannot allocate resource for EISA slot 5
<4>[ 5.109403] platform eisa.0: Cannot allocate resource for EISA slot 6
<4>[ 5.109561] platform eisa.0: Cannot allocate resource for EISA slot 7
<4>[ 5.109685] platform eisa.0: Cannot allocate resource for EISA slot 8
<6>[ 5.109832] platform eisa.0: EISA: Detected 0 cards
<6>[ 5.109906] intel_pstate: CPU model not supported
<6>[ 5.109967] sdhci: Secure Digital Host Controller Interface driver
<6>[ 5.110036] sdhci: Copyright(c) Pierre Ossman
<6>[ 5.111058] sdhci-pltfm: SDHCI platform and OF driver helper
<7>[ 5.126247] simple-framebuffer simple-framebuffer.0: [drm:simpledrm_probe] display mode={"": 60 28800 800 800 800 800 600 600 600 600 0x40 0x0}
<7>[ 5.126306] simple-framebuffer simple-framebuffer.0: [drm:simpledrm_probe] framebuffer format=XR24 little-endian (0x34325258), size=800x600, stride=3200 byte
<7>[ 5.126594] simple-framebuffer simple-framebuffer.0: [drm:simpledrm_probe] using I/O memory framebuffer at [mem 0xe0000000-0xe01d4fff flags 0x200]
<7>[ 5.129900] simple-framebuffer simple-framebuffer.0: [drm:drm_fb_build_fourcc_list] adding native format XR24 little-endian (0x34325258)
<7>[ 5.136063] simple-framebuffer simple-framebuffer.0: [drm:drm_sysfs_connector_add] [CONNECTOR:36:Unknown-1] adding connector to sysfs
<7>[ 5.138554] simple-framebuffer simple-framebuffer.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:36:Unknown-1] generating connector hotplug event
<6>[ 5.139094] [drm] Initialized simpledrm 1.0.0 for simple-framebuffer.0 on minor 0
<7>[ 5.139801] simple-framebuffer simple-framebuffer.0: [drm:drm_client_modeset_probe]
<7>[ 5.140417] simple-framebuffer simple-framebuffer.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:Unknown-1]
<7>[ 5.140479] simple-framebuffer simple-framebuffer.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:Unknown-1] status updated from unknown to connected
<7>[ 5.140711] simple-framebuffer simple-framebuffer.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:Unknown-1] probed modes:
<7>[ 5.140832] simple-framebuffer simple-framebuffer.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 28800 800 800 800 800 600 600 600 600 0x48 0x0
<7>[ 5.140865] simple-framebuffer simple-framebuffer.0: [drm:drm_client_modeset_probe] [CONNECTOR:36:Unknown-1] enabled? yes
<7>[ 5.141025] simple-framebuffer simple-framebuffer.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 5.141095] simple-framebuffer simple-framebuffer.0: [drm:drm_client_modeset_probe] [CONNECTOR:36:Unknown-1] looking for cmdline mode
<7>[ 5.141121] simple-framebuffer simple-framebuffer.0: [drm:drm_client_modeset_probe] [CONNECTOR:36:Unknown-1] looking for preferred mode, tile 0
<7>[ 5.141145] simple-framebuffer simple-framebuffer.0: [drm:drm_client_modeset_probe] [CONNECTOR:36:Unknown-1] Found mode 800x600
<7>[ 5.141167] simple-framebuffer simple-framebuffer.0: [drm:drm_client_modeset_probe] picking CRTCs for 4096x4096 config
<7>[ 5.141269] simple-framebuffer simple-framebuffer.0: [drm:drm_client_modeset_probe] [CRTC:34:crtc-0] desired mode 800x600 set (0,0)
<7>[ 5.141455] simple-framebuffer simple-framebuffer.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<7>[ 5.141516] simple-framebuffer simple-framebuffer.0: [drm:drm_fbdev_shmem_driver_fbdev_probe] surface width(800), height(600) and bpp(32)
<7>[ 5.142673] simple-framebuffer simple-framebuffer.0: [drm:drm_mode_addfb2] [FB:37]
<6>[ 5.160154] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
<4>[ 5.161827] ata1.00: Model 'INTEL SSDSC2KW240H6', rev ' LSF036C', applying quirks: zeroaftertrim
<6>[ 5.162168] ata1.00: ATA-10: INTEL SSDSC2KW240H6, LSF036C, max UDMA/133
<6>[ 5.162382] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 32), AA
<6>[ 5.163119] ata1.00: Features: Dev-Sleep
<6>[ 5.164302] ata1.00: configured for UDMA/133
<6>[ 5.172217] Console: switching to colour frame buffer device 100x37
<5>[ 5.172323] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2KW24 036C PQ: 0 ANSI: 5
<6>[ 5.184617] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
<6>[ 5.190000] drop_monitor: Initializing network drop monitor service
<5>[ 5.193641] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
<5>[ 5.193965] sd 0:0:0:0: Attached scsi generic sg0 type 0
<6>[ 5.195061] NET: Registered PF_INET6 protocol family
<5>[ 5.197217] sd 0:0:0:0: [sda] Write Protect is off
<7>[ 5.200000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[ 5.200654] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[ 5.207185] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
<6>[ 5.223531] Segment Routing with IPv6
<6>[ 5.227701] In-situ OAM (IOAM) with IPv6
<6>[ 5.231433] NET: Registered PF_PACKET protocol family
<5>[ 5.236284] Key type dns_resolver registered
<6>[ 5.252588] microcode: Current revision: 0x00000107
<6>[ 5.258590] sda: sda1 sda2
<6>[ 5.265225] IPI shorthand broadcast: enabled
<5>[ 5.270270] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[ 5.507517] sched_clock: Marking stable (5483023420, 23721294)->(5546810444, -40065730)
<6>[ 5.513907] ata2: SATA link down (SStatus 0 SControl 300)
<6>[ 5.525171] registered taskstats version 1
<5>[ 5.537831] Loading compiled-in X.509 certificates
<6>[ 6.056851] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
<6>[ 6.064698] ata1.00: configured for UDMA/133
<6>[ 6.071122] Demotion targets for Node 0: null
<6>[ 6.075429] kmemleak: Kernel memory leak detector initialized (mem pool available: 14949)
<6>[ 6.075465] kmemleak: Automatic memory scanning thread started
<5>[ 6.082687] Key type .fscrypt registered
<5>[ 6.085146] Key type fscrypt-provisioning registered
<6>[ 6.135646] Btrfs loaded, zoned=yes, fsverity=yes
<5>[ 6.159847] Key type encrypted registered
<6>[ 6.163389] AppArmor: AppArmor sha256 policy hashing enabled
<6>[ 6.186356] ima: No TPM chip found, activating TPM-bypass!
<5>[ 6.188987] Loading compiled-in module X.509 certificates
<5>[ 6.203902] Loaded X.509 cert 'Build time autogenerated kernel key: 161b58d105803e05905b0d71a2120e72359db952'
<6>[ 6.208999] ima: Allocated hash algorithm: sha256
<6>[ 6.212497] ima: No architecture policies found
<6>[ 6.217056] evm: Initialising EVM extended attributes:
<6>[ 6.219668] evm: security.selinux
<6>[ 6.222106] evm: security.SMACK64
<6>[ 6.224481] evm: security.SMACK64EXEC
<6>[ 6.226862] evm: security.SMACK64TRANSMUTE
<6>[ 6.229286] evm: security.SMACK64MMAP
<6>[ 6.231626] evm: security.apparmor
<6>[ 6.233822] evm: security.ima
<6>[ 6.235920] evm: security.capability
<6>[ 6.237960] evm: HMAC attrs: 0x1
<6>[ 6.271689] PM: Magic number: 0:219:235
<6>[ 6.274610] printk: legacy console [netcon0] enabled
<6>[ 6.276395] netconsole: network logging started
<4>[ 6.308083] ACPI: \_PR_.CPU0: _PSS evaluation failed: AE_NOT_FOUND
<4>[ 6.314489] ACPI: \_PR_.CPU1: _PSS evaluation failed: AE_NOT_FOUND
<4>[ 6.321365] ACPI: \_PR_.CPU2: _PSS evaluation failed: AE_NOT_FOUND
<4>[ 6.327139] ACPI: \_PR_.CPU3: _PSS evaluation failed: AE_NOT_FOUND
<6>[ 6.335883] RAS: Correctable Errors collector initialized.
<6>[ 6.342778] clk: Disabling unused clocks
<6>[ 6.348397] PM: genpd: Disabling unused power domains
<6>[ 6.354029] md: Waiting for all devices to be available before autodetect
<6>[ 6.355773] md: If you don't use raid, use raid=noautodetect
<6>[ 6.357652] md: Autodetecting RAID arrays.
<6>[ 6.360071] md: autorun ...
<6>[ 6.362219] md: ... autorun DONE.
<6>[ 6.859846] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
<6>[ 6.866029] ata1.00: configured for UDMA/133
<6>[ 7.235575] EXT4-fs (sda2): mounted filesystem 9b666f7d-f6c4-4be4-b8e1-b52612b06654 ro with ordered data mode. Quota mode: none.
<6>[ 7.241626] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
<6>[ 7.249516] devtmpfs: mounted
<6>[ 7.406061] Freeing unused decrypted memory: 2028K
<6>[ 7.417375] Freeing unused kernel image (initmem) memory: 5596K
<6>[ 7.420149] Write protecting the kernel read-only data: 34816k
<6>[ 7.426961] Freeing unused kernel image (rodata/data gap) memory: 1052K
<6>[ 7.516880] x86/mm: Checked W+X mappings: passed, no W+X pages found.
<6>[ 7.521227] Run /sbin/init as init process
<7>[ 7.522968] with arguments:
<7>[ 7.522985] /sbin/init
<7>[ 7.522997] with environment:
<7>[ 7.523008] HOME=/
<7>[ 7.523019] TERM=linux
<7>[ 7.523030] BOOT_IMAGE=/boot/drm_intel
<3>[ 8.013408] systemd[1]: Failed to find module 'autofs4'
<7>[ 8.342914] systemd[1]: systemd 255.4-1ubuntu8.4 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
<7>[ 8.351291] systemd[1]: Detected architecture x86-64.
<7>[ 8.388297] systemd[1]: Hostname set to <fi-pnv-d510>.
<6>[ 9.216894] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
<6>[ 9.223713] ata1.00: configured for UDMA/133
<4>[ 10.242055] ata1: limiting SATA link speed to 1.5 Gbps
<3>[ 10.244933] ata1.00: exception Emask 0x10 SAct 0x10000000 SErr 0x4050000 action 0xe frozen
<3>[ 10.247626] ata1.00: irq_stat 0x00000040, connection status changed
<3>[ 10.250501] ata1: SError: { PHYRdyChg CommWake DevExch }
<3>[ 10.253426] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 10.256322] ata1.00: cmd 60/08:e0:00:42:e1/00:00:00:00:00/40 tag 28 ncq dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 10.261697] ata1.00: status: { DRDY }
<6>[ 10.264834] ata1: hard resetting link
<6>[ 10.992857] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 10.998281] ata1.00: configured for UDMA/133
<6>[ 11.001183] sd 0:0:0:0: [sda] tag#28 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
<6>[ 11.006981] sd 0:0:0:0: [sda] tag#28 Sense Key : Illegal Request [current]
<6>[ 11.010022] sd 0:0:0:0: [sda] tag#28 Add. Sense: Unaligned write command
<6>[ 11.013010] sd 0:0:0:0: [sda] tag#28 CDB: Read(10) 28 00 00 e1 42 00 00 00 08 00
<3>[ 11.016138] I/O error, dev sda, sector 14762496 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
<6>[ 11.021973] ata1: EH complete
<6>[ 11.856865] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 11.862046] ata1.00: configured for UDMA/133
<3>[ 12.008840] ata1.00: exception Emask 0x10 SAct 0x1000 SErr 0x4050000 action 0xe frozen
<3>[ 12.011347] ata1.00: irq_stat 0x00000040, connection status changed
<3>[ 12.013793] ata1: SError: { PHYRdyChg CommWake DevExch }
<3>[ 12.016205] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 12.018578] ata1.00: cmd 60/08:60:b8:c3:62/00:00:00:00:00/40 tag 12 ncq dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 12.023189] ata1.00: status: { DRDY }
<6>[ 12.025552] ata1: hard resetting link
<6>[ 12.753841] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 12.760701] ata1.00: configured for UDMA/133
<6>[ 12.763303] ata1: EH complete
<3>[ 13.227846] ata1.00: exception Emask 0x10 SAct 0x100000 SErr 0x4050000 action 0xe frozen
<3>[ 13.230367] ata1.00: irq_stat 0x00000040, connection status changed
<3>[ 13.232917] ata1: SError: { PHYRdyChg CommWake DevExch }
<3>[ 13.235322] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 13.237595] ata1.00: cmd 60/a8:a0:50:e9:d6/00:00:00:00:00/40 tag 20 ncq dma 86016 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 13.242188] ata1.00: status: { DRDY }
<6>[ 13.244516] ata1: hard resetting link
<6>[ 13.968844] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 13.974472] ata1.00: configured for UDMA/133
<6>[ 13.977597] sd 0:0:0:0: [sda] tag#20 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
<6>[ 13.982307] sd 0:0:0:0: [sda] tag#20 Sense Key : Illegal Request [current]
<6>[ 13.984858] sd 0:0:0:0: [sda] tag#20 Add. Sense: Unaligned write command
<6>[ 13.987374] sd 0:0:0:0: [sda] tag#20 CDB: Read(10) 28 00 00 d6 e9 50 00 00 a8 00
<3>[ 13.990063] I/O error, dev sda, sector 14084432 op 0x0:(READ) flags 0x80700 phys_seg 20 prio class 0
<6>[ 13.994949] ata1: EH complete
<7>[ 14.588129] systemd[1]: Configuration file /run/systemd/system/systemd-networkd-wait-online.service.d/10-netplan.conf is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
<7>[ 14.607371] systemd[1]: Configuration file /run/systemd/system/netplan-ovs-cleanup.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
<7>[ 15.660428] systemd[1]: Queued start job for default target graphical.target.
<7>[ 15.845707] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
<7>[ 15.891457] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
<7>[ 15.929634] systemd[1]: Created slice user.slice - User and Session Slice.
<7>[ 15.948583] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
<7>[ 15.964719] systemd[1]: Starting of proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point unsupported.
<7>[ 15.980928] systemd[1]: Expecting device dev-disk-by\x2duuid-0C27\x2dDAF3.device - /dev/disk/by-uuid/0C27-DAF3...
<7>[ 15.995175] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
<7>[ 16.005996] systemd[1]: Reached target slices.target - Slice Units.
<7>[ 16.016136] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
<7>[ 16.026442] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
<7>[ 16.037148] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
<7>[ 16.051267] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
<7>[ 16.075002] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
<7>[ 16.092321] systemd[1]: Listening on multipathd.socket - multipathd control socket.
<7>[ 16.111347] systemd[1]: Listening on syslog.socket - Syslog Socket.
<7>[ 16.128625] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
<7>[ 16.144914] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
<7>[ 16.164085] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
<7>[ 16.183038] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
<7>[ 16.200691] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
<7>[ 16.218934] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 16.232697] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
<7>[ 16.250629] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
<7>[ 16.333797] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
<7>[ 16.404516] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
<7>[ 16.490400] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
<4>[ 16.498175] ata1.00: limiting speed to UDMA/100:PIO4
<3>[ 16.502229] ata1.00: exception Emask 0x10 SAct 0x8 SErr 0x4050000 action 0xe frozen
<3>[ 16.502253] ata1.00: irq_stat 0x00000040, connection status changed
<3>[ 16.502266] ata1: SError: { PHYRdyChg CommWake DevExch }
<3>[ 16.502287] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 16.502302] ata1.00: cmd 60/08:18:d8:a5:62/00:00:00:00:00/40 tag 3 ncq dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 16.502340] ata1.00: status: { DRDY }
<6>[ 16.524401] ata1: hard resetting link
<7>[ 16.589591] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
<7>[ 16.706284] systemd[1]: Starting systemd-journald.service - Journal Service...
<7>[ 16.785142] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
<7>[ 16.876123] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
<7>[ 16.976608] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
<7>[ 17.061285] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
<7>[ 17.152175] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
<7>[ 17.225475] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
<6>[ 17.256123] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 17.268445] ata1.00: configured for UDMA/100
<6>[ 17.277431] ata1: EH complete
<7>[ 17.310395] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
<7>[ 17.441563] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
<7>[ 17.559862] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
<7>[ 17.631700] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
<7>[ 17.674022] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
<7>[ 17.697440] systemd-journald[181]: Collecting audit messages is disabled.
<7>[ 17.762910] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
<7>[ 17.886518] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
<7>[ 17.912230] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 17.913299] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 17.988534] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
<7>[ 18.111443] systemd[1]: Started systemd-journald.service - Journal Service.
<5>[ 18.365162] random: crng init done
<6>[ 18.653569] pstore: Using crash dump compression: deflate
<6>[ 18.690553] fuse: init (API version 7.41)
<6>[ 18.747460] pstore: Registered efi_pstore as persistent store backend
<6>[ 20.005913] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 20.016593] ata1.00: configured for UDMA/100
<6>[ 21.132398] EXT4-fs (sda2): re-mounted 9b666f7d-f6c4-4be4-b8e1-b52612b06654 r/w. Quota mode: none.
<6>[ 21.916920] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 21.919788] ata1.00: configured for UDMA/100
<6>[ 22.014824] Adding 4194300k swap on /swap.img. Priority:-2 extents:35 across:147218428k SS
<7>[ 22.485391] systemd-journald[181]: Received client request to flush runtime journal.
<6>[ 23.163925] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 23.167192] ata1.00: configured for UDMA/100
<7>[ 23.460676] systemd-journald[181]: /var/log/journal/5417a49cea5840e88754911a4faa584b/system.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 23.460920] systemd-journald[181]: Rotating system journal.
<4>[ 24.423904] ata1.00: limiting speed to UDMA/33:PIO4
<6>[ 25.153897] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 25.157053] ata1.00: configured for UDMA/33
<6>[ 27.030111] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 27.033332] ata1.00: configured for UDMA/33
<6>[ 27.828948] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 27.832778] ata1.00: configured for UDMA/33
<6>[ 31.578912] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 31.583619] ata1.00: configured for UDMA/33
<6>[ 32.733240] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 32.736590] ata1.00: configured for UDMA/33
<6>[ 34.860085] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 34.866003] ata1.00: configured for UDMA/33
<6>[ 35.701837] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 35.704556] ata1.00: configured for UDMA/33
<6>[ 35.909630] parport_pc 00:04: reported by Plug and Play ACPI
<6>[ 35.923111] parport0: PC-style at 0x378, irq 7 [PCSPP]
<6>[ 36.077614] r8169 0000:01:00.0: enabling device (0000 -> 0003)
<4>[ 36.086254] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
<6>[ 36.378630] r8169 0000:01:00.0 eth0: RTL8168d/8111d, 00:27:0e:09:d0:f1, XID 281, IRQ 25
<6>[ 36.378677] r8169 0000:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
<6>[ 36.850931] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 36.854969] ata1.00: configured for UDMA/33
<4>[ 37.001376] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000428-0x0000000000000429 (\GPE0) (20240827/utaddress-204)
<6>[ 37.001516] ACPI: OSL: Resource conflict; ACPI support missing from driver?
<4>[ 37.001623] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000518-0x000000000000051B (\BGPO) (20240827/utaddress-204)
<4>[ 37.012899] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x000000000000050C-0x000000000000050F (\IGPO) (20240827/utaddress-204)
<6>[ 37.013035] ACPI: OSL: Resource conflict; ACPI support missing from driver?
<4>[ 37.022135] lpc_ich: Resource conflict(s) found affecting gpio_ich
<6>[ 37.080871] i801_smbus 0000:00:1f.3: enabling device (0000 -> 0001)
<6>[ 37.110343] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
<6>[ 37.141960] i2c i2c-0: Successfully instantiated SPD at 0x50
<6>[ 37.146120] i2c i2c-0: Successfully instantiated SPD at 0x51
<3>[ 37.231620] ata1.00: exception Emask 0x10 SAct 0x80000000 SErr 0x4050000 action 0xe frozen
<3>[ 37.235365] ata1.00: irq_stat 0x00000040, connection status changed
<3>[ 37.238978] ata1: SError: { PHYRdyChg CommWake DevExch }
<3>[ 37.242620] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 37.246135] ata1.00: cmd 60/08:f8:38:59:a3/00:00:16:00:00/40 tag 31 ncq dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 37.253460] ata1.00: status: { DRDY }
<6>[ 37.257080] ata1: hard resetting link
<6>[ 37.984948] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 37.989002] ata1.00: configured for UDMA/33
<6>[ 37.989266] ata1: EH complete
<6>[ 38.018188] intel_powerclamp: No package C-state available
<3>[ 38.292874] ata1.00: exception Emask 0x10 SAct 0x400 SErr 0x4050000 action 0xe frozen
<3>[ 38.297091] ata1.00: irq_stat 0x00000040, connection status changed
<3>[ 38.300639] ata1: SError: { PHYRdyChg CommWake DevExch }
<3>[ 38.304029] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 38.307379] ata1.00: cmd 60/08:50:d0:4b:e1/00:00:00:00:00/40 tag 10 ncq dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 38.314011] ata1.00: status: { DRDY }
<6>[ 38.317365] ata1: hard resetting link
<6>[ 39.052912] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 39.056321] ata1.00: configured for UDMA/33
<6>[ 39.056514] sd 0:0:0:0: [sda] tag#10 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
<6>[ 39.056582] sd 0:0:0:0: [sda] tag#10 Sense Key : Illegal Request [current]
<6>[ 39.056640] sd 0:0:0:0: [sda] tag#10 Add. Sense: Unaligned write command
<6>[ 39.056698] sd 0:0:0:0: [sda] tag#10 CDB: Read(10) 28 00 00 e1 4b d0 00 00 08 00
<3>[ 39.056797] I/O error, dev sda, sector 14765008 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
<6>[ 39.062698] ata1: EH complete
<6>[ 39.136594] gpio_ich gpio_ich.2.auto: GPIO from 512 to 561
<6>[ 39.202496] ppdev: user-space parallel port driver
<4>[ 39.282003] at24 0-0050: supply vcc not found, using dummy regulator
<6>[ 39.418854] at24 0-0050: 256 byte spd EEPROM, read-only
<4>[ 39.420624] at24 0-0051: supply vcc not found, using dummy regulator
<6>[ 39.531441] r8169 0000:01:00.0 enp1s0: renamed from eth0
<6>[ 39.560236] at24 0-0051: 256 byte spd EEPROM, read-only
<6>[ 40.428373] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 40.432231] ata1.00: configured for UDMA/33
<6>[ 41.603831] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 41.606462] ata1.00: configured for UDMA/33
<5>[ 41.722866] audit: type=1400 audit(1732029202.129:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=458 comm="apparmor_parser"
<5>[ 41.729571] audit: type=1400 audit(1732029202.136:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=460 comm="apparmor_parser"
<5>[ 41.740932] audit: type=1400 audit(1732029202.148:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=459 comm="apparmor_parser"
<5>[ 41.842721] audit: type=1400 audit(1732029202.249:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=463 comm="apparmor_parser"
<5>[ 41.851585] audit: type=1400 audit(1732029202.258:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=465 comm="apparmor_parser"
<5>[ 41.902429] audit: type=1400 audit(1732029202.309:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=464 comm="apparmor_parser"
<5>[ 41.912384] audit: type=1400 audit(1732029202.319:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=466 comm="apparmor_parser"
<5>[ 41.928069] audit: type=1400 audit(1732029202.335:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=462 comm="apparmor_parser"
<5>[ 41.940984] audit: type=1400 audit(1732029202.348:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=467 comm="apparmor_parser"
<5>[ 41.953193] audit: type=1400 audit(1732029202.360:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chrome" pid=469 comm="apparmor_parser"
<6>[ 42.994438] RTL8211B Gigabit Ethernet r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC)
<6>[ 43.207716] r8169 0000:01:00.0 enp1s0: Link is Down
<3>[ 43.265903] ata1.00: exception Emask 0x10 SAct 0x2000 SErr 0x4050000 action 0xe frozen
<3>[ 43.269523] ata1.00: irq_stat 0x00000040, connection status changed
<3>[ 43.273160] ata1: SError: { PHYRdyChg CommWake DevExch }
<3>[ 43.276902] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 43.280288] ata1.00: cmd 60/08:68:50:c2:c5/00:00:01:00:00/40 tag 13 ncq dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 43.287001] ata1.00: status: { DRDY }
<6>[ 43.290279] ata1: hard resetting link
<6>[ 44.026831] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 44.029639] ata1.00: configured for UDMA/33
<6>[ 44.029913] sd 0:0:0:0: [sda] tag#13 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
<6>[ 44.029995] sd 0:0:0:0: [sda] tag#13 Sense Key : Illegal Request [current]
<6>[ 44.030070] sd 0:0:0:0: [sda] tag#13 Add. Sense: Unaligned write command
<6>[ 44.030147] sd 0:0:0:0: [sda] tag#13 CDB: Read(10) 28 00 01 c5 c2 50 00 00 08 00
<3>[ 44.030192] I/O error, dev sda, sector 29737552 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
<6>[ 44.035878] ata1: EH complete
<6>[ 44.918837] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 44.921517] ata1.00: configured for UDMA/33
<6>[ 45.509712] r8169 0000:01:00.0 enp1s0: Link is Up - 1Gbps/Full - flow control off
<6>[ 46.833840] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 46.836451] ata1.00: configured for UDMA/33
<6>[ 47.752833] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 47.755503] ata1.00: configured for UDMA/33
<6>[ 48.568885] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 48.571531] ata1.00: configured for UDMA/33
<3>[ 49.890230] ata1.00: exception Emask 0x10 SAct 0x2000400 SErr 0x4050000 action 0xe frozen
<3>[ 49.894084] ata1.00: irq_stat 0x00000040, connection status changed
<3>[ 49.894103] ata1: SError: { PHYRdyChg CommWake DevExch }
<3>[ 49.894126] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 49.894139] ata1.00: cmd 60/18:50:28:a2:a5/00:00:03:00:00/40 tag 10 ncq dma 12288 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 49.894176] ata1.00: status: { DRDY }
<3>[ 49.894194] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 49.894206] ata1.00: cmd 60/90:c8:10:af:65/00:00:00:00:00/40 tag 25 ncq dma 73728 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 49.894240] ata1.00: status: { DRDY }
<6>[ 49.894272] ata1: hard resetting link
<6>[ 50.632882] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 50.635821] ata1.00: configured for UDMA/33
<6>[ 50.636008] sd 0:0:0:0: [sda] tag#10 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
<6>[ 50.636074] sd 0:0:0:0: [sda] tag#10 Sense Key : Illegal Request [current]
<6>[ 50.636129] sd 0:0:0:0: [sda] tag#10 Add. Sense: Unaligned write command
<6>[ 50.636186] sd 0:0:0:0: [sda] tag#10 CDB: Read(10) 28 00 03 a5 a2 28 00 00 18 00
<3>[ 50.636218] I/O error, dev sda, sector 61186600 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
<6>[ 50.641151] sd 0:0:0:0: [sda] tag#25 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
<6>[ 50.641251] sd 0:0:0:0: [sda] tag#25 Sense Key : Illegal Request [current]
<6>[ 50.641334] sd 0:0:0:0: [sda] tag#25 Add. Sense: Unaligned write command
<6>[ 50.641394] sd 0:0:0:0: [sda] tag#25 CDB: Read(10) 28 00 00 65 af 10 00 00 90 00
<3>[ 50.641428] I/O error, dev sda, sector 6663952 op 0x0:(READ) flags 0x80700 phys_seg 13 prio class 3
<6>[ 50.646501] ata1: EH complete
<4>[ 55.052883] kauditd_printk_skb: 110 callbacks suppressed
<5>[ 55.052903] audit: type=1400 audit(1732029215.457:122): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="rsyslogd" pid=669 comm="apparmor_parser"
<6>[ 60.671968] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 60.677965] ata1.00: configured for UDMA/33
<6>[ 63.976849] loop0: detected capacity change from 0 to 8
<5>[ 65.872984] audit: type=1400 audit(1732029226.280:123): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=946 comm="apparmor_parser"
<5>[ 65.891570] audit: type=1400 audit(1732029226.298:124): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=946 comm="apparmor_parser"
<6>[ 66.037689] perf: interrupt took too long (2521 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
<6>[ 68.186881] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 68.192800] ata1.00: configured for UDMA/33
<6>[ 69.015009] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 69.018956] ata1.00: configured for UDMA/33
<6>[ 70.160427] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 70.166782] ata1.00: configured for UDMA/33
<3>[ 70.797529] ata1.00: exception Emask 0x10 SAct 0x20000 SErr 0x4040000 action 0xe frozen
<3>[ 70.797874] ata1.00: irq_stat 0x00000040, connection status changed
<3>[ 70.798076] ata1: SError: { CommWake DevExch }
<3>[ 70.798235] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 70.798390] ata1.00: cmd 60/08:88:00:aa:a2/00:00:03:00:00/40 tag 17 ncq dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 70.799942] ata1.00: status: { DRDY }
<6>[ 70.800113] ata1: hard resetting link
<6>[ 71.524893] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 71.530468] ata1.00: configured for UDMA/33
<6>[ 71.530708] ata1: EH complete
<6>[ 72.332871] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 72.337357] ata1.00: configured for UDMA/33
<6>[ 74.667924] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 74.672449] ata1.00: configured for UDMA/33
<6>[ 76.117951] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 76.121862] ata1.00: configured for UDMA/33
<6>[ 77.006881] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 77.009840] ata1.00: configured for UDMA/33
<6>[ 78.256868] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 78.259801] ata1.00: configured for UDMA/33
<6>[ 79.345833] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 79.348550] ata1.00: configured for UDMA/33
<6>[ 80.250835] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 80.254226] ata1.00: configured for UDMA/33
<7>[ 81.967461] systemd-journald[181]: /var/log/journal/5417a49cea5840e88754911a4faa584b/user-1000.journal: Journal file uses a different sequence number ID, rotating.
<6>[ 82.973923] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 82.977003] ata1.00: configured for UDMA/33
<6>[ 83.835003] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 83.837918] ata1.00: configured for UDMA/33
<3>[ 139.908803] ata1.00: exception Emask 0x40 SAct 0xc07c00 SErr 0x8d0800 action 0x6 frozen
<3>[ 139.909035] ata1: SError: { HostInt PHYRdyChg CommWake 10B8B LinkSeq }
<3>[ 139.909188] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 139.909317] ata1.00: cmd 60/a8:50:08:cd:61/00:00:00:00:00/40 tag 10 ncq dma 86016 in
res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x44 (timeout)
<3>[ 139.909643] ata1.00: status: { DRDY }
<3>[ 139.909904] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 139.910094] ata1.00: cmd 60/08:58:b0:cd:61/00:00:00:00:00/40 tag 11 ncq dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x44 (timeout)
<3>[ 139.910539] ata1.00: status: { DRDY }
<3>[ 139.910719] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 139.910905] ata1.00: cmd 60/50:60:b8:cd:61/00:00:00:00:00/40 tag 12 ncq dma 40960 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x44 (timeout)
<3>[ 139.911352] ata1.00: status: { DRDY }
<3>[ 139.911458] ata1.00: failed command: WRITE FPDMA QUEUED
<3>[ 139.911588] ata1.00: cmd 61/20:68:00:71:1d/00:00:02:00:00/40 tag 13 ncq dma 16384 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x44 (timeout)
<3>[ 139.912033] ata1.00: status: { DRDY }
<3>[ 139.912191] ata1.00: failed command: WRITE FPDMA QUEUED
<3>[ 139.912376] ata1.00: cmd 61/10:70:d0:a1:19/00:00:02:00:00/40 tag 14 ncq dma 8192 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x44 (timeout)
<3>[ 139.912872] ata1.00: status: { DRDY }
<3>[ 139.912981] ata1.00: failed command: WRITE FPDMA QUEUED
<3>[ 139.913113] ata1.00: cmd 61/08:b0:18:c2:00/00:00:0e:00:00/40 tag 22 ncq dma 4096 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x44 (timeout)
<3>[ 139.913440] ata1.00: status: { DRDY }
<3>[ 139.915800] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 139.918285] ata1.00: cmd 60/08:b8:40:a7:62/00:00:01:00:00/40 tag 23 ncq dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x44 (timeout)
<3>[ 139.923036] ata1.00: status: { DRDY }
<6>[ 139.925474] ata1: hard resetting link
<6>[ 140.231038] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 140.233919] ata1.00: configured for UDMA/33
<6>[ 140.234134] sd 0:0:0:0: [sda] tag#10 FAILED Result: hostbyte=DID_TIME_OUT driverbyte=DRIVER_OK cmd_age=56s
<6>[ 140.234200] sd 0:0:0:0: [sda] tag#10 CDB: Read(10) 28 00 00 61 cd 08 00 00 a8 00
<3>[ 140.234233] I/O error, dev sda, sector 6409480 op 0x0:(READ) flags 0x80700 phys_seg 21 prio class 0
<6>[ 140.239580] sd 0:0:0:0: [sda] tag#12 FAILED Result: hostbyte=DID_TIME_OUT driverbyte=DRIVER_OK cmd_age=56s
<6>[ 140.239728] sd 0:0:0:0: [sda] tag#12 CDB: Read(10) 28 00 00 61 cd b8 00 00 50 00
<3>[ 140.239780] I/O error, dev sda, sector 6409656 op 0x0:(READ) flags 0x80700 phys_seg 10 prio class 0
<6>[ 140.245035] ata1: EH complete
<6>[ 141.440629] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 141.443594] ata1.00: configured for UDMA/33
<6>[ 142.920515] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 142.923476] ata1.00: configured for UDMA/33
<6>[ 143.720466] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 143.723423] ata1.00: configured for UDMA/33
<6>[ 145.552304] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 145.555107] ata1.00: configured for UDMA/33
<6>[ 149.132045] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 149.134759] ata1.00: configured for UDMA/33
<6>[ 150.159994] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 150.164351] ata1.00: configured for UDMA/33
<6>[ 150.606703] perf: interrupt took too long (3175 > 3151), lowering kernel.perf_event_max_sample_rate to 63000
<6>[ 151.463903] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 151.466788] ata1.00: configured for UDMA/33
<6>[ 152.615864] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 152.618658] ata1.00: configured for UDMA/33
<6>[ 154.199727] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 154.202466] ata1.00: configured for UDMA/33
<6>[ 155.624696] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 155.627433] ata1.00: configured for UDMA/33
<6>[ 156.575594] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 156.578205] ata1.00: configured for UDMA/33
<3>[ 157.111707] ata1.00: exception Emask 0x10 SAct 0x2 SErr 0x4050000 action 0xe frozen
<3>[ 157.115243] ata1.00: irq_stat 0x00000040, connection status changed
<3>[ 157.118686] ata1: SError: { PHYRdyChg CommWake DevExch }
<3>[ 157.121933] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 157.125181] ata1.00: cmd 60/08:08:d8:64:d7/00:00:01:00:00/40 tag 1 ncq dma 4096 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 157.131718] ata1.00: status: { DRDY }
<6>[ 157.135096] ata1: hard resetting link
<6>[ 157.863607] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 157.866707] ata1.00: configured for UDMA/33
<6>[ 157.866902] sd 0:0:0:0: [sda] tag#1 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
<6>[ 157.866969] sd 0:0:0:0: [sda] tag#1 Sense Key : Illegal Request [current]
<6>[ 157.867025] sd 0:0:0:0: [sda] tag#1 Add. Sense: Unaligned write command
<6>[ 157.867081] sd 0:0:0:0: [sda] tag#1 CDB: Read(10) 28 00 01 d7 64 d8 00 00 08 00
<3>[ 157.867113] I/O error, dev sda, sector 30893272 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
<6>[ 157.872174] ata1: EH complete
<3>[ 160.360432] ata1.00: exception Emask 0x10 SAct 0x2 SErr 0x4050000 action 0xe frozen
<3>[ 160.363414] ata1.00: irq_stat 0x00000040, connection status changed
<3>[ 160.366431] ata1: SError: { PHYRdyChg CommWake DevExch }
<3>[ 160.369434] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 160.372434] ata1.00: cmd 60/08:08:e0:a1:a2/00:00:05:00:00/40 tag 1 ncq dma 4096 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 160.378187] ata1.00: status: { DRDY }
<6>[ 160.381132] ata1: hard resetting link
<6>[ 161.103391] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 161.106247] ata1.00: configured for UDMA/33
<6>[ 161.106478] ata1: EH complete
<3>[ 162.837427] ata1.00: exception Emask 0x10 SAct 0x40 SErr 0x4050000 action 0xe frozen
<3>[ 162.841157] ata1.00: irq_stat 0x00000040, connection status changed
<3>[ 162.844734] ata1: SError: { PHYRdyChg CommWake DevExch }
<3>[ 162.847905] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 162.851123] ata1.00: cmd 60/08:30:10:a1:a2/00:00:05:00:00/40 tag 6 ncq dma 4096 in
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 162.857364] ata1.00: status: { DRDY }
<6>[ 162.860945] ata1: hard resetting link
<6>[ 163.583317] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 163.586254] ata1.00: configured for UDMA/33
<6>[ 163.586418] ata1: EH complete
<6>[ 165.303173] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 165.305814] ata1.00: configured for UDMA/33
<6>[ 166.671106] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 166.673817] ata1.00: configured for UDMA/33
<3>[ 166.798139] ata1.00: exception Emask 0x10 SAct 0x38000000 SErr 0x4050000 action 0xe frozen
<3>[ 166.800928] ata1.00: irq_stat 0x00000040, connection status changed
<3>[ 166.803666] ata1: SError: { PHYRdyChg CommWake DevExch }
<3>[ 166.806469] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 166.809176] ata1.00: cmd 60/b0:d8:00:e4:e1/00:00:00:00:00/40 tag 27 ncq dma 90112 in
res 40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 166.814495] ata1.00: status: { DRDY }
<3>[ 166.817164] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 166.819819] ata1.00: cmd 60/08:e0:b0:e4:e1/00:00:00:00:00/40 tag 28 ncq dma 4096 in
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 166.825047] ata1.00: status: { DRDY }
<3>[ 166.827646] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 166.830193] ata1.00: cmd 60/50:e8:b8:e4:e1/00:00:00:00:00/40 tag 29 ncq dma 40960 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 166.835091] ata1.00: status: { DRDY }
<6>[ 166.837583] ata1: hard resetting link
<6>[ 167.559105] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 167.561854] ata1.00: configured for UDMA/33
<6>[ 167.562118] sd 0:0:0:0: [sda] tag#27 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
<6>[ 167.562190] sd 0:0:0:0: [sda] tag#27 Sense Key : Illegal Request [current]
<6>[ 167.562253] sd 0:0:0:0: [sda] tag#27 Add. Sense: Unaligned write command
<6>[ 167.562313] sd 0:0:0:0: [sda] tag#27 CDB: Read(10) 28 00 00 e1 e4 00 00 00 b0 00
<3>[ 167.562347] I/O error, dev sda, sector 14803968 op 0x0:(READ) flags 0x80700 phys_seg 22 prio class 0
<6>[ 167.567854] sd 0:0:0:0: [sda] tag#29 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
<6>[ 167.567921] sd 0:0:0:0: [sda] tag#29 Sense Key : Illegal Request [current]
<6>[ 167.568065] sd 0:0:0:0: [sda] tag#29 Add. Sense: Unaligned write command
<6>[ 167.568137] sd 0:0:0:0: [sda] tag#29 CDB: Read(10) 28 00 00 e1 e4 b8 00 00 50 00
<3>[ 167.568173] I/O error, dev sda, sector 14804152 op 0x0:(READ) flags 0x80700 phys_seg 10 prio class 0
<6>[ 167.573425] ata1: EH complete
<3>[ 167.942061] ata1.00: exception Emask 0x10 SAct 0x8 SErr 0x4050000 action 0xe frozen
<3>[ 167.944809] ata1.00: irq_stat 0x00000040, connection status changed
<3>[ 167.947454] ata1: SError: { PHYRdyChg CommWake DevExch }
<3>[ 167.950387] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 167.953042] ata1.00: cmd 60/08:18:98:a6:a2/00:00:03:00:00/40 tag 3 ncq dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 167.958442] ata1.00: status: { DRDY }
<6>[ 167.961153] ata1: hard resetting link
<6>[ 168.687086] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 168.690733] ata1.00: configured for UDMA/33
<6>[ 168.691112] ata1: EH complete
<6>[ 169.927000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 169.930346] ata1.00: configured for UDMA/33
<3>[ 170.029990] ata1.00: exception Emask 0x10 SAct 0x20000 SErr 0x4050000 action 0xe frozen
<3>[ 170.032694] ata1.00: irq_stat 0x00000040, connection status changed
<3>[ 170.035443] ata1: SError: { PHYRdyChg CommWake DevExch }
<3>[ 170.038354] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 170.040976] ata1.00: cmd 60/08:88:e8:a1:a2/00:00:05:00:00/40 tag 17 ncq dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 170.046423] ata1.00: status: { DRDY }
<6>[ 170.049088] ata1: hard resetting link
<6>[ 170.774950] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 170.777559] ata1.00: configured for UDMA/33
<6>[ 170.777721] ata1: EH complete
<6>[ 171.678937] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 171.681600] ata1.00: configured for UDMA/33
<3>[ 172.223931] ata1.00: exception Emask 0x10 SAct 0x400000 SErr 0x4050000 action 0xe frozen
<3>[ 172.226661] ata1.00: irq_stat 0x00000040, connection status changed
<3>[ 172.229370] ata1: SError: { PHYRdyChg CommWake DevExch }
<3>[ 172.232211] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 172.234865] ata1.00: cmd 60/08:b0:b0:a2:a2/00:00:05:00:00/40 tag 22 ncq dma 4096 in
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 172.240108] ata1.00: status: { DRDY }
<6>[ 172.242828] ata1: hard resetting link
<6>[ 172.966848] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 172.969786] ata1.00: configured for UDMA/33
<6>[ 172.969975] ata1: EH complete
<6>[ 173.996951] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 174.000164] ata1.00: configured for UDMA/33
<6>[ 177.546649] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 177.549494] ata1.00: configured for UDMA/33
<6>[ 179.094756] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 179.097738] ata1.00: configured for UDMA/33