Results for igt@kms_atomic_transition@plane-all-modeset-transition-fencing-internal-panels

Result: Fail

git-log-oneline i915_display_info8 igt_runner8 runtimes8 results8.json results8-i915-load.json guc_logs8.tar i915_display_info_post_exec8 boot8 dmesg8

pstore-001-dmesg8 pstore-002-dmesg8

DetailValue
Duration 1.59 seconds
Hostname 
shard-mtlp-6
Igt-Version 
IGT-Version: 2.3-ge94da70d0 (x86_64) (Linux: 7.0.0-rc5-CI_DRM_18228-ge7f370d78d32+ x86_64)
Out 
Using IGT_SRANDOM=1774652611 for randomisation
Opened device: /dev/dri/card0
Starting subtest: plane-all-modeset-transition-fencing-internal-panels
Starting dynamic subtest: pipe-A-eDP-1
Using (pipe A + eDP-1) to run the subtest.
Running test on pipe A with resolution 2880x1800 and sprite size 2048x1800 alpha 1
Stack trace:
  #0 ../lib/igt_core.c:2075 __igt_fail_assert()
  #1 ../lib/igt_kms.c:4958 do_display_commit()
  #2 ../lib/igt_kms.c:5064 igt_display_commit2()
  #3 ../tests/kms_atomic_transition.c:649 __igt_unique____real_main1180()
  #4 ../tests/kms_atomic_transition.c:1180 main()
  #5 [__libc_init_first+0x8a]
  #6 [__libc_start_main+0x8b]
  #7 [_start+0x25]
Dynamic subtest pipe-A-eDP-1: FAIL (0.303s)
Starting dynamic subtest: pipe-B-eDP-1
Using (pipe B + eDP-1) to run the subtest.
Running test on pipe B with resolution 2880x1800 and sprite size 2048x1800 alpha 1
Dynamic subtest pipe-B-eDP-1: SUCCESS (1.015s)
Subtest plane-all-modeset-transition-fencing-internal-panels: FAIL (1.592s)
Err 
Starting subtest: plane-all-modeset-transition-fencing-internal-panels
Starting dynamic subtest: pipe-A-eDP-1
(kms_atomic_transition:2895) igt_kms-CRITICAL: Test assertion failure function do_display_commit, file ../lib/igt_kms.c:4958:
(kms_atomic_transition:2895) igt_kms-CRITICAL: Failed assertion: ret == 0
(kms_atomic_transition:2895) igt_kms-CRITICAL: Last errno: 22, Invalid argument
(kms_atomic_transition:2895) igt_kms-CRITICAL: error: -22 != 0
Dynamic subtest pipe-A-eDP-1 failed.
**** DEBUG ****
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.5: Setting property "CRTC_H" to 0x100/256
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.5: Setting property "FB_ID" to 0x239/569
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.5: Setting property "CRTC_ID" to 0x97/151
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.5: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_atomic_transition:2895) igt_kms-DEBUG: display:     eDP-1: preparing atomic, CRTC: A
(kms_atomic_transition:2895) igt_kms-DEBUG: eDP-1: Setting property "CRTC_ID" to 0x97/151
(kms_atomic_transition:2895) igt_kms-DEBUG: display: }
(kms_atomic_transition:2895) igt_fb-DEBUG: igt_create_fb_with_bo_size(width=512, height=512, format=AR24(0x34325241), modifier=0x0, size=0)
(kms_atomic_transition:2895) igt_fb-DEBUG: igt_create_fb_with_bo_size(handle=3, pitch=2048)
(kms_atomic_transition:2895) ioctl_wrappers-DEBUG: Test requirement passed: igt_has_fb_modifiers(fd)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: A.0: plane_set_fb(566)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: A.0: plane_set_size (2880x1800)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: A.0: fb_set_size(2880x1800)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: A.0: fb_set_size(2880x1800)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: A.0: plane_set_size (2880x1800)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: A.3: plane_set_fb(570)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: A.3: plane_set_size (512x512)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: A.3: fb_set_position(0,0)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: A.3: fb_set_size(512x512)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: A.3: fb_set_size(512x512)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: A.3: plane_set_size (512x512)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: A.5: plane_set_fb(569)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: A.5: plane_set_size (256x256)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: A.5: fb_set_position(0,0)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: A.5: fb_set_size(256x256)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: A.5: fb_set_size(256x256)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: A.5: plane_set_size (256x256)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: commit {
(kms_atomic_transition:2895) igt_kms-DEBUG: Pipe A: Setting property "MODE_ID" to 0x238/568
(kms_atomic_transition:2895) igt_kms-DEBUG: Pipe A: Setting property "ACTIVE" to 0x1/1
(kms_atomic_transition:2895) igt_kms-DEBUG: display:     populating plane data: A.0, fb 566
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x236/566
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x97/151
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_atomic_transition:2895) igt_kms-DEBUG: display:     populating plane data: A.3, fb 570
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.3: Setting property "SRC_X" to 0x0/0
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.3: Setting property "SRC_Y" to 0x0/0
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.3: Setting property "SRC_W" to 0x2000000/33554432
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.3: Setting property "SRC_H" to 0x2000000/33554432
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.3: Setting property "CRTC_W" to 0x200/512
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.3: Setting property "CRTC_H" to 0x200/512
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.3: Setting property "FB_ID" to 0x23a/570
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.3: Setting property "CRTC_ID" to 0x97/151
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.3: Setting property "COLOR_ENCODING" to 0x1/1
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.3: Setting property "COLOR_RANGE" to 0x0/0
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.3: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_atomic_transition:2895) igt_kms-DEBUG: display:     populating plane data: A.5, fb 569
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.5: Setting property "SRC_X" to 0x0/0
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.5: Setting property "SRC_Y" to 0x0/0
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.5: Setting property "SRC_W" to 0x1000000/16777216
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.5: Setting property "SRC_H" to 0x1000000/16777216
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.5: Setting property "CRTC_W" to 0x100/256
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.5: Setting property "CRTC_H" to 0x100/256
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.5: Setting property "FB_ID" to 0x239/569
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.5: Setting property "CRTC_ID" to 0x97/151
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.5: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_atomic_transition:2895) igt_kms-DEBUG: display:     eDP-1: preparing atomic, CRTC: A
(kms_atomic_transition:2895) igt_kms-DEBUG: eDP-1: Setting property "CRTC_ID" to 0x97/151
(kms_atomic_transition:2895) igt_kms-DEBUG: display: }
(kms_atomic_transition:2895) igt_fb-DEBUG: igt_create_fb_with_bo_size(width=1024, height=1024, format=AR24(0x34325241), modifier=0x0, size=0)
(kms_atomic_transition:2895) igt_fb-DEBUG: igt_create_fb_with_bo_size(handle=3, pitch=4096)
(kms_atomic_transition:2895) ioctl_wrappers-DEBUG: Test requirement passed: igt_has_fb_modifiers(fd)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: A.0: plane_set_fb(566)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: A.0: plane_set_size (2880x1800)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: A.0: fb_set_size(2880x1800)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: A.0: fb_set_size(2880x1800)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: A.0: plane_set_size (2880x1800)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: A.3: plane_set_fb(570)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: A.3: plane_set_size (1024x1024)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: A.3: fb_set_position(0,0)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: A.3: fb_set_size(1024x1024)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: A.3: fb_set_size(1024x1024)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: A.3: plane_set_size (1024x1024)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: A.5: plane_set_fb(569)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: A.5: plane_set_size (256x256)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: A.5: fb_set_position(0,0)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: A.5: fb_set_size(256x256)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: A.5: fb_set_size(256x256)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: A.5: plane_set_size (256x256)
(kms_atomic_transition:2895) igt_kms-DEBUG: display: commit {
(kms_atomic_transition:2895) igt_kms-DEBUG: Pipe A: Setting property "MODE_ID" to 0x238/568
(kms_atomic_transition:2895) igt_kms-DEBUG: Pipe A: Setting property "ACTIVE" to 0x1/1
(kms_atomic_transition:2895) igt_kms-DEBUG: display:     populating plane data: A.0, fb 566
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x236/566
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x97/151
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_atomic_transition:2895) igt_kms-DEBUG: display:     populating plane data: A.3, fb 570
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.3: Setting property "SRC_X" to 0x0/0
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.3: Setting property "SRC_Y" to 0x0/0
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.3: Setting property "SRC_W" to 0x4000000/67108864
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.3: Setting property "SRC_H" to 0x4000000/67108864
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.3: Setting property "CRTC_W" to 0x400/1024
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.3: Setting property "CRTC_H" to 0x400/1024
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.3: Setting property "FB_ID" to 0x23a/570
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.3: Setting property "CRTC_ID" to 0x97/151
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.3: Setting property "COLOR_ENCODING" to 0x1/1
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.3: Setting property "COLOR_RANGE" to 0x0/0
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.3: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_atomic_transition:2895) igt_kms-DEBUG: display:     populating plane data: A.5, fb 569
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.5: Setting property "SRC_X" to 0x0/0
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.5: Setting property "SRC_Y" to 0x0/0
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.5: Setting property "SRC_W" to 0x1000000/16777216
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.5: Setting property "SRC_H" to 0x1000000/16777216
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.5: Setting property "CRTC_W" to 0x100/256
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.5: Setting property "CRTC_H" to 0x100/256
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.5: Setting property "FB_ID" to 0x239/569
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.5: Setting property "CRTC_ID" to 0x97/151
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.5: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_atomic_transition:2895) igt_kms-DEBUG: display:     eDP-1: preparing atomic, CRTC: A
(kms_atomic_transition:2895) igt_kms-DEBUG: eDP-1: Setting property "CRTC_ID" to 0x97/151
(kms_atomic_transition:2895) igt_kms-DEBUG: display: }
(kms_atomic_transition:2895) igt_fb-DEBUG: igt_create_fb_with_bo_size(width=2048, height=1800, format=AR24(0x34325241), modifier=0x0, size=0)
(kms_atomic_transition:2895) igt_fb-DEBUG: igt_create_fb_with_bo_size(handle=3, pitch=8192)
(kms_atomic_transition:2895) ioctl_wrappers-DEBUG: Test requirement passed: igt_has_fb_modifiers(fd)
(kms_atomic_transition:2895) INFO: Running test on pipe A with resolution 2880x1800 and sprite size 2048x1800 alpha 1
(kms_atomic_transition:2895) igt_kms-DEBUG: display: commit {
(kms_atomic_transition:2895) igt_kms-DEBUG: Pipe A: Setting property "MODE_ID" to 0x238/568
(kms_atomic_transition:2895) igt_kms-DEBUG: Pipe A: Setting property "ACTIVE" to 0x1/1
(kms_atomic_transition:2895) igt_kms-DEBUG: display:     populating plane data: A.0, fb 566
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x236/566
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x97/151
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_atomic_transition:2895) igt_kms-DEBUG: display:     populating plane data: A.3, fb 570
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.3: Setting property "SRC_X" to 0x0/0
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.3: Setting property "SRC_Y" to 0x0/0
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.3: Setting property "SRC_W" to 0x4000000/67108864
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.3: Setting property "SRC_H" to 0x4000000/67108864
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.3: Setting property "CRTC_W" to 0x400/1024
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.3: Setting property "CRTC_H" to 0x400/1024
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.3: Setting property "FB_ID" to 0x23a/570
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.3: Setting property "CRTC_ID" to 0x97/151
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.3: Setting property "COLOR_ENCODING" to 0x1/1
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.3: Setting property "COLOR_RANGE" to 0x0/0
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.3: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_atomic_transition:2895) igt_kms-DEBUG: display:     populating plane data: A.5, fb 569
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.5: Setting property "SRC_X" to 0x0/0
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.5: Setting property "SRC_Y" to 0x0/0
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.5: Setting property "SRC_W" to 0x1000000/16777216
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.5: Setting property "SRC_H" to 0x1000000/16777216
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.5: Setting property "CRTC_W" to 0x100/256
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.5: Setting property "CRTC_H" to 0x100/256
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.5: Setting property "FB_ID" to 0x239/569
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.5: Setting property "CRTC_ID" to 0x97/151
(kms_atomic_transition:2895) igt_kms-DEBUG: plane A.5: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_atomic_transition:2895) igt_kms-DEBUG: display:     eDP-1: preparing atomic, CRTC: A
(kms_atomic_transition:2895) igt_kms-DEBUG: eDP-1: Setting property "CRTC_ID" to 0x97/151
(kms_atomic_transition:2895) igt_kms-DEBUG: display: }
(kms_atomic_transition:2895) igt_kms-CRITICAL: Test assertion failure function do_display_commit, file ../lib/igt_kms.c:4958:
(kms_atomic_transition:2895) igt_kms-CRITICAL: Failed assertion: ret == 0
(kms_atomic_transition:2895) igt_kms-CRITICAL: Last errno: 22, Invalid argument
(kms_atomic_transition:2895) igt_kms-CRITICAL: error: -22 != 0
(kms_atomic_transition:2895) igt_core-INFO: Stack trace:
(kms_atomic_transition:2895) igt_core-INFO:   #0 ../lib/igt_core.c:2075 __igt_fail_assert()
(kms_atomic_transition:2895) igt_core-INFO:   #1 ../lib/igt_kms.c:4958 do_display_commit()
(kms_atomic_transition:2895) igt_core-INFO:   #2 ../lib/igt_kms.c:5064 igt_display_commit2()
(kms_atomic_transition:2895) igt_core-INFO:   #3 ../tests/kms_atomic_transition.c:649 __igt_unique____real_main1180()
(kms_atomic_transition:2895) igt_core-INFO:   #4 ../tests/kms_atomic_transition.c:1180 main()
(kms_atomic_transition:2895) igt_core-INFO:   #5 [__libc_init_first+0x8a]
(kms_atomic_transition:2895) igt_core-INFO:   #6 [__libc_start_main+0x8b]
(kms_atomic_transition:2895) igt_core-INFO:   #7 [_start+0x25]
****  END  ****
Dynamic subtest pipe-A-eDP-1: FAIL (0.303s)
Starting dynamic subtest: pipe-B-eDP-1
Dynamic subtest pipe-B-eDP-1: SUCCESS (1.015s)
Subtest plane-all-modeset-transition-fencing-internal-panels: FAIL (1.592s)
Dmesg
<6> [268.462187] Console: switching to colour dummy device 80x25
<6> [268.462522] [IGT] kms_atomic_transition: executing
<7> [268.467004] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [268.468057] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [268.483833] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [268.485745] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [268.486139] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [268.486503] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [268.489302] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:DP-1]
<7> [268.489311] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:517:DP-1]
<7> [268.493541] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:DP-1] disconnected
<7> [268.493789] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [268.493792] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [268.497983] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [268.498223] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2]
<7> [268.498226] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:535:DP-2]
<7> [268.498455] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [268.498667] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2] disconnected
<7> [268.498899] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-2]
<7> [268.498902] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:544:HDMI-A-2]
<7> [268.499188] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4
<7> [268.503470] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-2] disconnected
<7> [268.503719] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:548:DP-3]
<7> [268.503722] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:548:DP-3]
<7> [268.503948] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [268.504144] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:548:DP-3] disconnected
<7> [268.504376] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:557:DP-4]
<7> [268.504379] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:557:DP-4]
<7> [268.504597] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [268.504803] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:557:DP-4] disconnected
<7> [268.505127] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [268.505131] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:508:eDP-1]
<7> [268.505295] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [268.505432] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [268.505626] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 turning VDD on
<7> [268.505886] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7> [268.507032] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [268.507443] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [268.507561] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [268.507687] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [268.507828] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [268.507833] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [268.507836] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [268.507852] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] VRR capable: no
<7> [268.507966] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [268.508079] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [268.508610] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [268.508613] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [268.508624] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:DP-1]
<7> [268.508627] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:517:DP-1]
<7> [268.512850] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:DP-1] disconnected
<7> [268.512859] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [268.512862] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [268.517050] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [268.517059] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2]
<7> [268.517061] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:535:DP-2]
<7> [268.517292] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2] disconnected
<7> [268.517300] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-2]
<7> [268.517302] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:544:HDMI-A-2]
<7> [268.521553] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-2] disconnected
<7> [268.521562] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:548:DP-3]
<7> [268.521564] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:548:DP-3]
<7> [268.521812] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:548:DP-3] disconnected
<7> [268.521819] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:557:DP-4]
<7> [268.521822] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:557:DP-4]
<7> [268.522060] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:557:DP-4] disconnected
<6> [268.522609] [IGT] kms_atomic_transition: starting subtest plane-all-modeset-transition-fencing-internal-panels
<6> [268.523635] [IGT] kms_atomic_transition: starting dynamic subtest pipe-A-eDP-1
<7> [268.741607] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - short
<7> [268.793799] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - long
<6> [268.827358] [IGT] kms_atomic_transition: finished subtest pipe-A-eDP-1, FAIL
<6> [268.828999] [IGT] kms_atomic_transition: starting dynamic subtest pipe-B-eDP-1
<7> [269.372656] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - long
<6> [269.844108] [IGT] kms_atomic_transition: finished subtest pipe-B-eDP-1, SUCCESS
<7> [270.055628] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - short
<7> [270.107902] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - long
<6> [270.115978] [IGT] kms_atomic_transition: finished subtest plane-all-modeset-transition-fencing-internal-panels, FAIL
<6> [270.116820] [IGT] kms_atomic_transition: exiting, ret=98
<7> [270.117477] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [270.133788] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [270.134338] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [270.134902] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [270.135500] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [270.138330] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:508:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [270.138605] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:507:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [270.138808] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 HDR no link rate required 1926825 available 2160000
<7> [270.138992] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [270.139176] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:507:DDI A/PHY A] [CRTC:151:pipe A]
<7> [270.139338] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected no, found yes)
<7> [270.139511] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes)
<7> [270.139699] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)
<7> [270.139831] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 0, found 4)
<7> [270.139966] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 7483046/8388608 link 498869/524288)
<7> [270.140100] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [270.140227] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [270.140358] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)
<7> [270.140492] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)
<7> [270.140625] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)
<7> [270.140774] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)
<7> [270.140906] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)
<7> [270.141037] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)
<7> [270.141165] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)
<7> [270.141292] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1801)
<7> [270.141424] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)
<7> [270.141550] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)
<7> [270.141698] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1878)
<7> [270.141827] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1878)
<7> [270.141952] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)
<7> [270.142077] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)
<7> [270.142202] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)
<7> [270.142326] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)
<7> [270.142449] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)
<7> [270.142573] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)
<7> [270.142721] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)
<7> [270.142845] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1801)
<7> [270.142968] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)
<7> [270.143090] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)
<7> [270.143213] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1878)
<7> [270.143443] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1878)
<7> [270.143688] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [270.143868] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [270.144049] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [270.144232] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)
<7> [270.144366] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [270.144491] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 513820)
<7> [270.144614] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 513820)
<7> [270.144759] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)
<7> [270.144879] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in set_context_latency (expected 0, found 1)
<7> [270.145000] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset
<7> [270.145180] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7> [270.145302] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1
<7> [270.145426] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [270.145544] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95
<7> [270.145688] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [270.145807] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [270.145925] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [270.146043] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [270.146178] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [270.146305] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [270.146433] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [270.146644] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [270.146853] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [270.147042] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [270.147298] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 0 kHz -> 256910 kHz
<7> [270.147510] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 32114 kHz
<7> [270.147662] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Can change cdclk via squashing
<7> [270.147791] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 307200 kHz, actual 307200 kHz
<7> [270.147917] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0
<7> [270.148066] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:151:pipe A] allocated DPLL 0
<7> [270.148198] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:151:pipe A] reserving DPLL 0
<7> [270.148336] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: yes [modeset]
<7> [270.148467] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [270.148596] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [270.148745] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>
<7> [270.148876] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [270.149009] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0
<7> [270.149135] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0
<7> [270.149261] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64
<7> [270.149387] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [270.149514] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled
<7> [270.149652] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled
<7> [270.149847] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [270.150360] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0
<7> [270.150883] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [270.151352] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 4, length 14
<7> [270.151879] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB
<7> [270.152187] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB
<7> [270.152511] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0
<7> [270.152853] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range
<7> [270.153158] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined
<7> [270.153465] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1
<7> [270.153647] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 1
<7> [270.153796] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1878, vmax: 1878, flipline: 1878, pipeline full: 0, guardband: 76 vsync start: 75, vsync end: 69
<7> [270.153947] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1878, vmax vtotal: 1878
<7> [270.154095] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [270.154239] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [270.154387] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [270.154534] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa
<7> [270.154703] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa
<7> [270.154848] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa
<7> [270.154990] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820, min cdclk 256910
<7> [270.155127] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0
<7> [270.155258] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [270.155393] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [270.155526] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0
<7> [270.155680] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [270.155814] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: fracen: yes,
<7> [270.155945] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] quot: 40960, rem: 0, den: 1,
<7> [270.156079] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 140, tx_clk_div: 0.
<7> [270.156211] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state:
<7> [270.156345] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21
<7> [270.156480] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7> [270.156614] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [270.156761] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [270.156892] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7> [270.157024] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7> [270.157156] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [270.157288] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [270.157419] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [270.157556] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [270.157705] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [270.157834] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [270.157965] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [270.158096] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [270.158226] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [270.158359] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [270.158492] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [270.158625] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [270.158778] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [270.158910] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:509] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [270.159041] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [270.159171] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [270.159300] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no
<7> [270.159432] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no
<7> [270.159564] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no
<7> [270.159709] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no
<7> [270.159842] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no
<7> [270.160067] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [270.160210] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [270.160513] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [270.160732] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A
<7> [270.160923] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa8000000)
<7> [270.161090] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [270.161268] i915 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [i915]] aud_ts_cdclk set to M=60, N=768
<7> [270.161404] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:507:DDI A/PHY A]
<7> [270.161537] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:516:DDI B/PHY B]
<7> [270.161676] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:518:DP-MST A]
<7> [270.161808] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:519:DP-MST B]
<7> [270.161939] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:520:DP-MST C]
<7> [270.162069] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:521:DP-MST D]
<7> [270.162194] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:534:DDI TC1/PHY TC1]
<7> [270.162321] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:536:DP-MST A]
<7> [270.162448] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:537:DP-MST B]
<7> [270.162576] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:538:DP-MST C]
<7> [270.162715] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:539:DP-MST D]
<7> [270.162844] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:543:DDI TC2/PHY TC2]
<7> [270.162973] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:547:DDI TC3/PHY TC3]
<7> [270.163102] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:549:DP-MST A]
<7> [270.163231] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:550:DP-MST B]
<7> [270.163357] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:551:DP-MST C]
<7> [270.163484] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:552:DP-MST D]
<7> [270.163612] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:556:DDI TC4/PHY TC4]
<7> [270.163753] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:558:DP-MST A]
<7> [270.163880] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:559:DP-MST B]
<7> [270.164008] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:560:DP-MST C]
<7> [270.164140] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:561:DP-MST D]
<7> [270.164302] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf
<7> [270.164537] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: no -> yes (pipe: *)
<7> [270.164681] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 4 (mbus joined: yes)
<7> [270.164891] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A
<7> [270.165672] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A]
<7> [270.165824] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0
<7> [270.168047] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 turn panel power on
<7> [270.168199] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power cycle (445 ms remaining)
<7> [270.621217] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [270.662125] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [270.662785] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power on
<7> [270.663466] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [270.694556] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [270.695118] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - long
<7> [270.695641] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [270.696237] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:507:DDI A/PHY A]
<7> [270.863343] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [270.864484] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 turning VDD on
<7> [270.865383] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [270.871048] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80
<7> [270.872852] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [270.873513] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07
<7> [270.874709] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [270.875885] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [270.876953] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Clock recovery OK
<7> [270.877143] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using DP training pattern TPS3
<7> [270.878614] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [270.878815] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4
<7> [270.879543] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A
<7> [270.879956] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]
<7> [270.880150] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A
<7> [270.880403] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:508:eDP-1] set backlight PWM = 13892
<7> [270.891157] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [270.893065] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:508:eDP-1]
<7> [270.893423] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A]
<7> [270.897397] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [270.902455] Console: switching to colour frame buffer device 180x56
Created at 2026-03-28 00:13:46