<5>[ 0.000000] Linux version 6.14.0-rc7-CI_DRM_16301-ga123616cf3af+ (kbuild2@gfx-ci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Fri Mar 21 19:07:33 UTC 2025
<6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast ro
<6>[ 0.000000] KERNEL supported cpus:
<6>[ 0.000000] Intel GenuineIntel
<6>[ 0.000000] AMD AuthenticAMD
<6>[ 0.000000] Hygon HygonGenuine
<6>[ 0.000000] Centaur CentaurHauls
<6>[ 0.000000] zhaoxin Shanghai
<6>[ 0.000000] x86/tme: not enabled by BIOS
<6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
<6>[ 0.000000] BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000060a3efff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000060a3f000-0x0000000063db6fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000063db7000-0x0000000063edbfff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x0000000063edc000-0x0000000063ffefff] ACPI data
<6>[ 0.000000] BIOS-e820: [mem 0x0000000063fff000-0x0000000063ffffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000064000000-0x00000000787fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000000ffffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable
<6>[ 0.000000] NX (Execute Disable) protection: active
<6>[ 0.000000] APIC: Static calls initialized
<6>[ 0.000000] efi: EFI v2.7 by Intel
<6>[ 0.000000] efi: ACPI=0x63ffe000 ACPI 2.0=0x63ffe014 TPMFinalLog=0x63e11000 SMBIOS=0x60b16000 MEMATTR=0x5bd8b018 ESRT=0x5bd9b918 MOKvar=0x60c4b000 TPMEventLog=0x63f0f018
<6>[ 0.000000] efi: Remove mem300: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
<6>[ 0.000000] efi: Remove mem302: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved
<6>[ 0.000000] SMBIOS 3.6 present.
<6>[ 0.000000] DMI: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024
<6>[ 0.000000] DMI: Memory slots populated: 8/8
<6>[ 0.000000] tsc: Detected 3400.000 MHz processor
<6>[ 0.000000] tsc: Detected 3379.200 MHz TSC
<7>[ 0.000010] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[ 0.000012] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[ 0.000015] last_pfn = 0x880000 max_arch_pfn = 0x400000000
<6>[ 0.000020] MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs
<6>[ 0.000022] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
<6>[ 0.000595] x2apic: enabled by BIOS, switching to x2apic ops
<6>[ 0.000597] last_pfn = 0x64000 max_arch_pfn = 0x400000000
<6>[ 0.004849] esrt: Reserving ESRT space from 0x000000005bd9b918 to 0x000000005bd9ba40.
<7>[ 0.004860] e820: update [mem 0x5bd9b000-0x5bd9bfff] usable ==> reserved
<6>[ 0.004893] Using GB pages for direct mapping
<6>[ 0.005729] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes
<6>[ 0.005731] printk: early log buf free: 258864(98%)
<6>[ 0.005733] Secure boot disabled
<6>[ 0.005736] ACPI: Early table checksum verification disabled
<6>[ 0.005740] ACPI: RSDP 0x0000000063FFE014 000024 (v02 INTEL )
<6>[ 0.005745] ACPI: XSDT 0x0000000063F15228 000184 (v01 INTEL MTL 00000002 01000013)
<6>[ 0.005750] ACPI: FACP 0x0000000063FDC000 000114 (v06 INTEL MTL 00000002 01000013)
<6>[ 0.005754] ACPI: DSDT 0x0000000063F55000 083F8A (v02 INTEL MTL 00000002 01000013)
<6>[ 0.005756] ACPI: FACS 0x0000000063DF7000 000040
<6>[ 0.005758] ACPI: SSDT 0x0000000063FFC000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930)
<6>[ 0.005760] ACPI: SSDT 0x0000000063FFB000 00070D (v02 PmRef Cpu0Ist 00003000 INTL 20210930)
<6>[ 0.005762] ACPI: SSDT 0x0000000063FFA000 0005E4 (v02 PmRef Cpu0Hwp 00003000 INTL 20210930)
<6>[ 0.005765] ACPI: SSDT 0x0000000063FF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930)
<6>[ 0.005767] ACPI: SSDT 0x0000000063FF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930)
<6>[ 0.005769] ACPI: SSDT 0x0000000063FF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930)
<6>[ 0.005771] ACPI: SSDT 0x0000000063FF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930)
<6>[ 0.005774] ACPI: SSDT 0x0000000063FF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930)
<6>[ 0.005776] ACPI: SSDT 0x0000000063FF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930)
<6>[ 0.005778] ACPI: SSDT 0x0000000063FED000 003BC8 (v02 CpuRef CpuSsdt 00003000 INTL 20210930)
<6>[ 0.005780] ACPI: DTPR 0x0000000063FEC000 000098 (v01 00000000 00000000)
<6>[ 0.005782] ACPI: SSDT 0x0000000063FEB000 000D03 (v02 INTEL PDatTabl 00001000 INTL 20210930)
<6>[ 0.005784] ACPI: SSDT 0x0000000063FE8000 002494 (v02 INTEL IgfxSsdt 00003000 INTL 20210930)
<6>[ 0.005786] ACPI: SSDT 0x0000000063FDE000 009AB7 (v02 INTEL TcssSsdt 00001000 INTL 20210930)
<6>[ 0.005788] ACPI: SSDT 0x0000000063FDD000 0000F9 (v02 INTEL IpuSsdt 00001000 INTL 20210930)
<6>[ 0.005790] ACPI: HPET 0x0000000063FDB000 000038 (v01 INTEL MTL 00000002 01000013)
<6>[ 0.005792] ACPI: APIC 0x0000000063FDA000 000358 (v05 INTEL MTL 00000002 01000013)
<6>[ 0.005794] ACPI: MCFG 0x0000000063FD9000 00003C (v01 INTEL MTL 00000002 01000013)
<6>[ 0.005796] ACPI: SSDT 0x0000000063F45000 00FCEF (v02 INTEL MtlP_Rvp 00001000 INTL 20210930)
<6>[ 0.005798] ACPI: SSDT 0x0000000063F43000 00147F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930)
<6>[ 0.005801] ACPI: SSDT 0x0000000063F3E000 00389C (v02 INTEL Ther_Rvp 00001000 INTL 20210930)
<6>[ 0.005802] ACPI: SSDT 0x0000000063F38000 00535A (v02 DptfTb DptfTabl 00001000 INTL 20210930)
<6>[ 0.005805] ACPI: SSDT 0x0000000063FFD000 00060E (v02 INTEL Tpm2Tabl 00001000 INTL 20210930)
<6>[ 0.005807] ACPI: TPM2 0x0000000063F37000 00004C (v04 INTEL MTL 00000002 01000013)
<6>[ 0.005809] ACPI: LPIT 0x0000000063F36000 0000CC (v01 INTEL MTL 00000002 01000013)
<6>[ 0.005811] ACPI: WSMT 0x0000000063F35000 000028 (v01 INTEL MTL 00000002 01000013)
<6>[ 0.005813] ACPI: SSDT 0x0000000063F34000 000CA6 (v02 INTEL PtidDevc 00001000 INTL 20210930)
<6>[ 0.005816] ACPI: SSDT 0x0000000063F2E000 00587D (v02 INTEL TbtTypeC 00000000 INTL 20210930)
<6>[ 0.005818] ACPI: DBGP 0x0000000063F2D000 000034 (v01 INTEL MTL 00000002 01000013)
<6>[ 0.005820] ACPI: DBG2 0x0000000063F2C000 000054 (v00 INTEL MTL 00000002 01000013)
<6>[ 0.005822] ACPI: NHLT 0x0000000063F2B000 00098B (v00 INTEL MTL 00000002 01000013)
<6>[ 0.005824] ACPI: SSDT 0x0000000063F29000 001191 (v02 INTEL UsbCTabl 00001000 INTL 20210930)
<6>[ 0.005826] ACPI: SSDT 0x0000000063F23000 005CAE (v02 INTEL EcSsdt 00000000 INTL 20210930)
<6>[ 0.005828] ACPI: ECDT 0x0000000063F22000 000069 (v01 MTL 00000002 01000013)
<6>[ 0.005831] ACPI: DMAR 0x0000000063F21000 0000A8 (v01 INTEL MTL 00000002 01000013)
<6>[ 0.005832] ACPI: FPDT 0x0000000063F20000 000044 (v01 INTEL MTL 00000002 01000013)
<6>[ 0.005835] ACPI: SSDT 0x0000000063F1E000 001015 (v02 INTEL xh_mtlp3 00000000 INTL 20210930)
<6>[ 0.005836] ACPI: SSDT 0x0000000063F1B000 00281A (v02 SocGpe SocGpe 00003000 INTL 20210930)
<6>[ 0.005838] ACPI: SSDT 0x0000000063F18000 0028D3 (v02 SocCmn SocCmn 00003000 INTL 20210930)
<6>[ 0.005840] ACPI: SSDT 0x0000000063F16000 0011A0 (v02 INTEL St00Ssdt 00001000 INTL 20210930)
<6>[ 0.005842] ACPI: ASF! 0x0000000063F42000 000074 (v32 INTEL MTL 00000002 01000013)
<6>[ 0.005844] ACPI: PHAT 0x0000000063F14000 000810 (v01 INTEL MTL 00000005 MSFT 0100000D)
<6>[ 0.005846] ACPI: BGRT 0x0000000063F13000 000038 (v01 INTEL MTL 00000002 01000013)
<6>[ 0.005848] ACPI: Reserving FACP table memory at [mem 0x63fdc000-0x63fdc113]
<6>[ 0.005849] ACPI: Reserving DSDT table memory at [mem 0x63f55000-0x63fd8f89]
<6>[ 0.005850] ACPI: Reserving FACS table memory at [mem 0x63df7000-0x63df703f]
<6>[ 0.005851] ACPI: Reserving SSDT table memory at [mem 0x63ffc000-0x63ffc38b]
<6>[ 0.005851] ACPI: Reserving SSDT table memory at [mem 0x63ffb000-0x63ffb70c]
<6>[ 0.005852] ACPI: Reserving SSDT table memory at [mem 0x63ffa000-0x63ffa5e3]
<6>[ 0.005852] ACPI: Reserving SSDT table memory at [mem 0x63ff9000-0x63ff91aa]
<6>[ 0.005853] ACPI: Reserving SSDT table memory at [mem 0x63ff8000-0x63ff8393]
<6>[ 0.005854] ACPI: Reserving SSDT table memory at [mem 0x63ff6000-0x63ff7bae]
<6>[ 0.005854] ACPI: Reserving SSDT table memory at [mem 0x63ff4000-0x63ff561f]
<6>[ 0.005855] ACPI: Reserving SSDT table memory at [mem 0x63ff2000-0x63ff3348]
<6>[ 0.005855] ACPI: Reserving SSDT table memory at [mem 0x63ff1000-0x63ff1fba]
<6>[ 0.005856] ACPI: Reserving SSDT table memory at [mem 0x63fed000-0x63ff0bc7]
<6>[ 0.005856] ACPI: Reserving DTPR table memory at [mem 0x63fec000-0x63fec097]
<6>[ 0.005857] ACPI: Reserving SSDT table memory at [mem 0x63feb000-0x63febd02]
<6>[ 0.005857] ACPI: Reserving SSDT table memory at [mem 0x63fe8000-0x63fea493]
<6>[ 0.005858] ACPI: Reserving SSDT table memory at [mem 0x63fde000-0x63fe7ab6]
<6>[ 0.005858] ACPI: Reserving SSDT table memory at [mem 0x63fdd000-0x63fdd0f8]
<6>[ 0.005859] ACPI: Reserving HPET table memory at [mem 0x63fdb000-0x63fdb037]
<6>[ 0.005860] ACPI: Reserving APIC table memory at [mem 0x63fda000-0x63fda357]
<6>[ 0.005860] ACPI: Reserving MCFG table memory at [mem 0x63fd9000-0x63fd903b]
<6>[ 0.005861] ACPI: Reserving SSDT table memory at [mem 0x63f45000-0x63f54cee]
<6>[ 0.005861] ACPI: Reserving SSDT table memory at [mem 0x63f43000-0x63f4447e]
<6>[ 0.005862] ACPI: Reserving SSDT table memory at [mem 0x63f3e000-0x63f4189b]
<6>[ 0.005862] ACPI: Reserving SSDT table memory at [mem 0x63f38000-0x63f3d359]
<6>[ 0.005863] ACPI: Reserving SSDT table memory at [mem 0x63ffd000-0x63ffd60d]
<6>[ 0.005864] ACPI: Reserving TPM2 table memory at [mem 0x63f37000-0x63f3704b]
<6>[ 0.005864] ACPI: Reserving LPIT table memory at [mem 0x63f36000-0x63f360cb]
<6>[ 0.005865] ACPI: Reserving WSMT table memory at [mem 0x63f35000-0x63f35027]
<6>[ 0.005865] ACPI: Reserving SSDT table memory at [mem 0x63f34000-0x63f34ca5]
<6>[ 0.005865] ACPI: Reserving SSDT table memory at [mem 0x63f2e000-0x63f3387c]
<6>[ 0.005866] ACPI: Reserving DBGP table memory at [mem 0x63f2d000-0x63f2d033]
<6>[ 0.005866] ACPI: Reserving DBG2 table memory at [mem 0x63f2c000-0x63f2c053]
<6>[ 0.005867] ACPI: Reserving NHLT table memory at [mem 0x63f2b000-0x63f2b98a]
<6>[ 0.005868] ACPI: Reserving SSDT table memory at [mem 0x63f29000-0x63f2a190]
<6>[ 0.005868] ACPI: Reserving SSDT table memory at [mem 0x63f23000-0x63f28cad]
<6>[ 0.005868] ACPI: Reserving ECDT table memory at [mem 0x63f22000-0x63f22068]
<6>[ 0.005869] ACPI: Reserving DMAR table memory at [mem 0x63f21000-0x63f210a7]
<6>[ 0.005869] ACPI: Reserving FPDT table memory at [mem 0x63f20000-0x63f20043]
<6>[ 0.005869] ACPI: Reserving SSDT table memory at [mem 0x63f1e000-0x63f1f014]
<6>[ 0.005870] ACPI: Reserving SSDT table memory at [mem 0x63f1b000-0x63f1d819]
<6>[ 0.005870] ACPI: Reserving SSDT table memory at [mem 0x63f18000-0x63f1a8d2]
<6>[ 0.005871] ACPI: Reserving SSDT table memory at [mem 0x63f16000-0x63f1719f]
<6>[ 0.005871] ACPI: Reserving ASF! table memory at [mem 0x63f42000-0x63f42073]
<6>[ 0.005872] ACPI: Reserving PHAT table memory at [mem 0x63f14000-0x63f1480f]
<6>[ 0.005873] ACPI: Reserving BGRT table memory at [mem 0x63f13000-0x63f13037]
<6>[ 0.005954] APIC: Switched APIC routing to: cluster x2apic
<6>[ 0.006166] No NUMA configuration found
<6>[ 0.006166] Faking a node at [mem 0x0000000000000000-0x000000087fffffff]
<6>[ 0.006174] NODE_DATA(0) allocated [mem 0x87fb52fc0-0x87fb7dfff]
<6>[ 0.006325] Zone ranges:
<6>[ 0.006327] DMA [mem 0x0000000000001000-0x0000000000ffffff]
<6>[ 0.006328] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
<6>[ 0.006329] Normal [mem 0x0000000100000000-0x000000087fffffff]
<6>[ 0.006329] Device empty
<6>[ 0.006330] Movable zone start for each node
<6>[ 0.006331] Early memory node ranges
<6>[ 0.006331] node 0: [mem 0x0000000000001000-0x000000000009efff]
<6>[ 0.006332] node 0: [mem 0x0000000000100000-0x0000000060a3efff]
<6>[ 0.006333] node 0: [mem 0x0000000063fff000-0x0000000063ffffff]
<6>[ 0.006333] node 0: [mem 0x0000000100000000-0x000000087fffffff]
<6>[ 0.006335] Initmem setup node 0 [mem 0x0000000000001000-0x000000087fffffff]
<6>[ 0.006341] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[ 0.006370] On node 0, zone DMA: 97 pages in unavailable ranges
<6>[ 0.009198] On node 0, zone DMA32: 13760 pages in unavailable ranges
<6>[ 0.051997] On node 0, zone Normal: 16384 pages in unavailable ranges
<6>[ 0.052473] ACPI: PM-Timer IO Port: 0x1808
<4>[ 0.052477] CPU topo: Boot CPU APIC ID not the first enumerated APIC ID: 20 != 10
<4>[ 0.052478] CPU topo: [Firmware Bug]: APIC enumeration order not specification compliant
<6>[ 0.052481] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
<6>[ 0.052526] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
<6>[ 0.052529] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[ 0.052530] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>[ 0.052533] ACPI: Using ACPI (MADT) for SMP configuration information
<6>[ 0.052534] ACPI: HPET id: 0x8086a201 base: 0xfed00000
<7>[ 0.052548] e820: update [mem 0x5bd45000-0x5bd5ffff] usable ==> reserved
<6>[ 0.052555] TSC deadline timer available
<6>[ 0.052557] CPU topo: Max. logical packages: 1
<6>[ 0.052558] CPU topo: Max. logical dies: 1
<6>[ 0.052558] CPU topo: Max. dies per package: 1
<6>[ 0.052560] CPU topo: Max. threads per core: 2
<6>[ 0.052561] CPU topo: Num. cores per package: 16
<6>[ 0.052561] CPU topo: Num. threads per package: 22
<6>[ 0.052561] CPU topo: Allowing 22 present CPUs plus 0 hotplug CPUs
<6>[ 0.052577] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[ 0.052579] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
<6>[ 0.052580] PM: hibernation: Registered nosave memory: [mem 0x5bd45000-0x5bd5ffff]
<6>[ 0.052580] PM: hibernation: Registered nosave memory: [mem 0x5bd9b000-0x5bd9bfff]
<6>[ 0.052581] PM: hibernation: Registered nosave memory: [mem 0x60a3f000-0x63db6fff]
<6>[ 0.052582] PM: hibernation: Registered nosave memory: [mem 0x63db7000-0x63edbfff]
<6>[ 0.052582] PM: hibernation: Registered nosave memory: [mem 0x63edc000-0x63ffefff]
<6>[ 0.052583] PM: hibernation: Registered nosave memory: [mem 0x64000000-0x787fffff]
<6>[ 0.052583] PM: hibernation: Registered nosave memory: [mem 0x78800000-0xfed1ffff]
<6>[ 0.052584] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
<6>[ 0.052584] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
<6>[ 0.052586] [mem 0x78800000-0xfed1ffff] available for PCI devices
<6>[ 0.052587] Booting paravirtualized kernel on bare hardware
<6>[ 0.052590] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
<6>[ 0.052602] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:22 nr_cpu_ids:22 nr_node_ids:1
<6>[ 0.054100] percpu: Embedded 91 pages/cpu s249856 r8192 d114688 u524288
<7>[ 0.054105] pcpu-alloc: s249856 r8192 d114688 u524288 alloc=1*2097152
<7>[ 0.054106] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07
<7>[ 0.054109] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15
<7>[ 0.054111] pcpu-alloc: [0] 16 17 18 19 [0] 20 21 -- --
<5>[ 0.054128] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast ro
<5>[ 0.054212] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space.
<5>[ 0.054230] random: crng init done
<6>[ 0.057075] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
<6>[ 0.058470] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
<6>[ 0.058598] Fallback order for Node 0: 0
<6>[ 0.058601] Built 1 zonelists, mobility grouping on. Total pages: 8260062
<6>[ 0.058602] Policy zone: Normal
<6>[ 0.058617] mem auto-init: stack:off, heap alloc:on, heap free:off
<6>[ 0.058618] stackdepot: allocating hash table via alloc_large_system_hash
<6>[ 0.058620] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear)
<6>[ 0.060037] software IO TLB: area num 32.
<4>[ 0.119063] **********************************************************
<4>[ 0.119063] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.119064] ** **
<4>[ 0.119064] ** This system shows unhashed kernel memory addresses **
<4>[ 0.119064] ** via the console, logs, and other interfaces. This **
<4>[ 0.119064] ** might reduce the security of your system. **
<4>[ 0.119065] ** **
<4>[ 0.119065] ** If you see this message and you are not debugging **
<4>[ 0.119065] ** the kernel, report this immediately to your system **
<4>[ 0.119065] ** administrator! **
<4>[ 0.119065] ** **
<4>[ 0.119066] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.119066] **********************************************************
<6>[ 0.120486] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=22, Nodes=1
<6>[ 0.120882] ftrace: allocating 59560 entries in 233 pages
<6>[ 0.147474] ftrace: allocated 233 pages with 5 groups
<6>[ 0.148986] Dynamic Preempt: voluntary
<6>[ 0.149924] Running RCU self tests
<6>[ 0.149925] Running RCU synchronous self tests
<6>[ 0.149926] rcu: Preemptible hierarchical RCU implementation.
<6>[ 0.149926] rcu: RCU lockdep checking is enabled.
<6>[ 0.149927] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=22.
<6>[ 0.149927] Trampoline variant of Tasks RCU enabled.
<6>[ 0.149927] Rude variant of Tasks RCU enabled.
<6>[ 0.149928] Tracing variant of Tasks RCU enabled.
<6>[ 0.149928] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
<6>[ 0.149929] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=22
<6>[ 0.150017] Running RCU synchronous self tests
<6>[ 0.150031] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22.
<6>[ 0.150036] RCU Tasks Rude: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22.
<6>[ 0.150042] RCU Tasks Trace: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22.
<6>[ 0.161514] NR_IRQS: 524544, nr_irqs: 2232, preallocated irqs: 16
<6>[ 0.162040] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[ 0.162397] Console: colour dummy device 80x25
<6>[ 0.162407] printk: legacy console [tty0] enabled
<6>[ 0.163556] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<6>[ 0.163564] ... MAX_LOCKDEP_SUBCLASSES: 8
<6>[ 0.163567] ... MAX_LOCK_DEPTH: 48
<6>[ 0.163571] ... MAX_LOCKDEP_KEYS: 8192
<6>[ 0.163575] ... CLASSHASH_SIZE: 4096
<6>[ 0.163578] ... MAX_LOCKDEP_ENTRIES: 524288
<6>[ 0.163582] ... MAX_LOCKDEP_CHAINS: 524288
<6>[ 0.163586] ... CHAINHASH_SIZE: 262144
<6>[ 0.163590] memory used by lock dependency info: 54145 kB
<6>[ 0.163594] memory used for stack traces: 4224 kB
<6>[ 0.163598] per task-struct memory footprint: 1920 bytes
<6>[ 0.163673] ACPI: Core revision 20240827
<6>[ 0.164662] hpet: HPET dysfunctional in PC10. Force disabled.
<6>[ 0.164720] APIC: Switch to symmetric I/O mode setup
<6>[ 0.164726] DMAR: Host address width 42
<6>[ 0.164729] DMAR: DRHD base: 0x000000fc800000 flags: 0x0
<6>[ 0.164770] DMAR: dmar0: reg_base_addr fc800000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0ef5e
<6>[ 0.164778] DMAR: DRHD base: 0x000000fc801000 flags: 0x1
<6>[ 0.164797] DMAR: dmar1: reg_base_addr fc801000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0efde
<6>[ 0.164805] DMAR: SATC flags: 0x1
<6>[ 0.164815] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc801000 IOMMU 1
<6>[ 0.164821] DMAR-IR: HPET id 0 under DRHD base 0xfc801000
<6>[ 0.164826] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>[ 0.166535] DMAR-IR: Enabled IRQ remapping in x2apic mode
<6>[ 0.170846] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns
<6>[ 0.170866] Calibrating delay loop (skipped), value calculated using timer frequency.. 6758.40 BogoMIPS (lpj=3379200)
<6>[ 0.170932] CPU0: Thermal monitoring enabled (TM1)
<6>[ 0.170938] x86/cpu: User Mode Instruction Prevention (UMIP) activated
<6>[ 0.171139] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
<6>[ 0.171144] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
<6>[ 0.171151] process: using mwait in idle threads
<6>[ 0.171159] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
<6>[ 0.171167] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
<6>[ 0.171172] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
<6>[ 0.171179] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
<6>[ 0.171186] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
<6>[ 0.171202] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
<6>[ 0.171209] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
<6>[ 0.171214] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
<6>[ 0.171219] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
<6>[ 0.171225] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
<6>[ 0.171231] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
<6>[ 0.171236] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
<6>[ 0.171241] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
<6>[ 0.171246] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
<6>[ 0.171860] Freeing SMP alternatives memory: 48K
<6>[ 0.171860] pid_max: default: 32768 minimum: 301
<6>[ 0.171860] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm
<6>[ 0.171860] landlock: Up and running.
<6>[ 0.171860] Yama: becoming mindful.
<6>[ 0.171860] AppArmor: AppArmor initialized
<6>[ 0.171860] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.171860] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.171860] Running RCU synchronous self tests
<6>[ 0.171860] Running RCU synchronous self tests
<6>[ 0.171860] smpboot: CPU0: Intel(R) Core(TM) Ultra 7 1003H (family: 0x6, model: 0xaa, stepping: 0x4)
<6>[ 0.171860] Running RCU Tasks wait API self tests
<6>[ 0.171860] Running RCU Tasks Rude wait API self tests
<6>[ 0.171860] Running RCU Tasks Trace wait API self tests
<6>[ 0.171860] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Meteorlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
<6>[ 0.172066] core: cpu_core PMU driver:
<6>[ 0.172075] ... version: 5
<6>[ 0.172079] ... bit width: 48
<6>[ 0.172083] ... generic registers: 8
<6>[ 0.172087] ... value mask: 0000ffffffffffff
<6>[ 0.172092] ... max period: 00007fffffffffff
<6>[ 0.172097] ... fixed-purpose events: 4
<6>[ 0.172101] ... event mask: 0001000f000000ff
<6>[ 0.172154] signal: max sigframe size: 3632
<6>[ 0.172181] Estimated ratio of average max frequency by base frequency (times 1024): 1445
<6>[ 0.172302] rcu: Hierarchical SRCU implementation.
<6>[ 0.172308] rcu: Max phase no-delay instances is 400.
<6>[ 0.172967] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level
<6>[ 0.175628] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
<6>[ 0.176443] smp: Bringing up secondary CPUs ...
<6>[ 0.176850] smpboot: x86: Booting SMP configuration:
<6>[ 0.176858] .... node #0, CPUs: #1
<6>[ 0.176949] Callback from call_rcu_tasks_trace() invoked.
<4>[ 0.177247] #3 #6 #8 #10 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21
<6>[ 0.009684] core: cpu_atom PMU driver:
<6>[ 0.009684] ... version: 5
<6>[ 0.009684] ... bit width: 48
<6>[ 0.009684] ... generic registers: 8
<6>[ 0.009684] ... value mask: 0000ffffffffffff
<6>[ 0.009684] ... max period: 00007fffffffffff
<6>[ 0.009684] ... fixed-purpose events: 3
<6>[ 0.009684] ... event mask: 00000007000000ff
<4>[ 0.202964] #2 #4 #5 #7 #9 #11
<6>[ 0.217921] smp: Brought up 1 node, 22 CPUs
<6>[ 0.217939] smpboot: Total of 22 processors activated (148684.80 BogoMIPS)
<6>[ 0.220921] Memory: 32228152K/33040248K available (24294K kernel code, 5580K rwdata, 9252K rodata, 5628K init, 68404K bss, 778304K reserved, 0K cma-reserved)
<6>[ 0.225144] devtmpfs: initialized
<6>[ 0.225191] x86/mm: Memory block size: 128MB
<6>[ 0.244154] ACPI: PM: Registering ACPI NVS region [mem 0x63db7000-0x63edbfff] (1200128 bytes)
<6>[ 0.244873] Running RCU synchronous self tests
<6>[ 0.244890] Running RCU synchronous self tests
<6>[ 0.244910] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[ 0.244968] futex hash table entries: 8192 (order: 8, 1048576 bytes, linear)
<6>[ 0.245416] pinctrl core: initialized pinctrl subsystem
<6>[ 0.246056] PM: RTC time: 00:55:10, date: 2025-03-22
<6>[ 0.246979] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[ 0.248089] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
<6>[ 0.248486] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[ 0.248925] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[ 0.248982] audit: initializing netlink subsys (disabled)
<5>[ 0.249022] audit: type=2000 audit(1742604910.078:1): state=initialized audit_enabled=0 res=1
<6>[ 0.249615] thermal_sys: Registered thermal governor 'fair_share'
<6>[ 0.249616] thermal_sys: Registered thermal governor 'bang_bang'
<6>[ 0.249623] thermal_sys: Registered thermal governor 'step_wise'
<6>[ 0.249627] thermal_sys: Registered thermal governor 'user_space'
<6>[ 0.249632] thermal_sys: Registered thermal governor 'power_allocator'
<6>[ 0.249896] EISA bus registered
<6>[ 0.249930] cpuidle: using governor ladder
<6>[ 0.249930] cpuidle: using governor menu
<6>[ 0.249958] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[ 0.250442] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
<6>[ 0.250472] PCI: Using configuration type 1 for base access
<6>[ 0.251006] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
<6>[ 0.251901] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
<6>[ 0.251908] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
<6>[ 0.251913] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
<6>[ 0.251919] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
<6>[ 0.270861] raid6: avx2x4 gen() 56904 MB/s
<6>[ 0.287861] raid6: avx2x2 gen() 59162 MB/s
<6>[ 0.304861] raid6: avx2x1 gen() 57169 MB/s
<6>[ 0.304865] raid6: using algorithm avx2x2 gen() 59162 MB/s
<6>[ 0.321861] raid6: .... xor() 42131 MB/s, rmw enabled
<6>[ 0.321866] raid6: using avx2x2 recovery algorithm
<6>[ 0.322698] fbcon: Taking over console
<6>[ 0.323003] ACPI: Added _OSI(Module Device)
<6>[ 0.323012] ACPI: Added _OSI(Processor Device)
<6>[ 0.323021] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[ 0.323029] ACPI: Added _OSI(Processor Aggregator Device)
<6>[ 0.935816] ACPI: 28 ACPI AML tables successfully acquired and loaded
<6>[ 0.946246] ACPI: EC: EC started
<6>[ 0.946257] ACPI: EC: interrupt blocked
<6>[ 0.949616] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 0.949622] ACPI: EC: Boot ECDT EC used to handle transactions
<6>[ 0.966887] Callback from call_rcu_tasks() invoked.
<6>[ 1.233423] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.233440] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.325232] ACPI: Interpreter enabled
<6>[ 1.325435] ACPI: PM: (supports S0 S4 S5)
<6>[ 1.325444] ACPI: Using IOAPIC for interrupt routing
<6>[ 1.336198] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[ 1.336218] PCI: Ignoring E820 reservations for host bridge windows
<6>[ 1.384036] ACPI: Enabled 10 GPEs in block 00 to 7F
<6>[ 1.384067] ACPI: Enabled 8 GPEs in block 80 to DF
<6>[ 1.455002] ACPI: \_SB_.PC00.PAUD: New power resource
<6>[ 1.726803] ACPI: \_SB_.PC00.RP01.PXP_: New power resource
<6>[ 1.760175] ACPI: \_SB_.PC00.RP06.PXP_: New power resource
<6>[ 1.773362] ACPI: \_SB_.PC00.RP07.PXP_: New power resource
<6>[ 1.799301] ACPI: \_SB_.PC00.RP09.PXP_: New power resource
<6>[ 1.811383] ACPI: \_SB_.PC00.RP10.PXP_: New power resource
<6>[ 1.818459] ACPI: \_SB_.PC00.RP11.PXP_: New power resource
<6>[ 1.825435] ACPI: \_SB_.PC00.RP12.PXP_: New power resource
<6>[ 2.004318] ACPI: \_SB_.PC00.TBT0: New power resource
<6>[ 2.005181] ACPI: \_SB_.PC00.TBT1: New power resource
<6>[ 2.005711] ACPI: \_SB_.PC00.D3C_: New power resource
<6>[ 2.167521] ACPI: \_TZ_.FN00: New power resource
<6>[ 2.168560] ACPI: \_TZ_.FN01: New power resource
<6>[ 2.169564] ACPI: \_TZ_.FN02: New power resource
<6>[ 2.170557] ACPI: \_TZ_.FN03: New power resource
<6>[ 2.171940] ACPI: \_TZ_.FN04: New power resource
<6>[ 2.177461] ACPI: \PIN_: New power resource
<6>[ 2.183314] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
<6>[ 2.183345] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
<6>[ 2.187756] acpi PNP0A08:00: _OSC: platform does not support [AER]
<6>[ 2.195782] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME PCIeCapability LTR DPC]
<6>[ 2.209972] PCI host bridge to bus 0000:00
<6>[ 2.210011] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
<6>[ 2.210019] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
<6>[ 2.210027] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[ 2.210035] pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff window]
<6>[ 2.210043] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x3ffbfffffff window]
<6>[ 2.210052] pci_bus 0000:00: root bus resource [bus 00-fe]
<6>[ 2.219959] pci 0000:00:00.0: [8086:7d01] type 00 class 0x060000 conventional PCI endpoint
<6>[ 2.220614] pci 0000:00:02.0: [8086:7d55] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
<6>[ 2.220650] pci 0000:00:02.0: BAR 0 [mem 0x5018000000-0x5018ffffff 64bit pref]
<6>[ 2.220658] pci 0000:00:02.0: BAR 2 [mem 0x4000000000-0x400fffffff 64bit pref]
<6>[ 2.220693] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics
<6>[ 2.220702] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6>[ 2.220749] pci 0000:00:02.0: PME# supported from D0 D3hot
<6>[ 2.220787] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x00ffffff 64bit pref]
<6>[ 2.220793] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x06ffffff 64bit pref]: contains BAR 0 for 7 VFs
<6>[ 2.222248] pci 0000:00:04.0: [8086:7d03] type 00 class 0x118000 conventional PCI endpoint
<6>[ 2.222293] pci 0000:00:04.0: BAR 0 [mem 0x501a280000-0x501a29ffff 64bit]
<6>[ 2.223734] pci 0000:00:05.0: [8086:7d19] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint
<6>[ 2.223762] pci 0000:00:05.0: BAR 0 [mem 0x5019000000-0x5019ffffff 64bit]
<6>[ 2.223774] pci 0000:00:05.0: enabling Extended Tags
<6>[ 2.224796] pci 0000:00:06.0: [8086:7ecb] type 01 class 0x060400 PCIe Root Port
<6>[ 2.224832] pci 0000:00:06.0: PCI bridge to [bus 01]
<6>[ 2.224844] pci 0000:00:06.0: bridge window [mem 0x8c000000-0x8c0fffff]
<6>[ 2.224968] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
<6>[ 2.225023] pci 0000:00:06.0: PTM enabled (root), 4ns granularity
<6>[ 2.230871] pci 0000:00:07.0: [8086:7ec6] type 01 class 0x060400 PCIe Root Port
<6>[ 2.230905] pci 0000:00:07.0: PCI bridge to [bus 02-2b]
<6>[ 2.230915] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff]
<6>[ 2.230935] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref]
<6>[ 2.231034] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<6>[ 2.231079] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
<6>[ 2.236278] pci 0000:00:07.3: [8086:7ec7] type 01 class 0x060400 PCIe Root Port
<6>[ 2.236312] pci 0000:00:07.3: PCI bridge to [bus 2c-55]
<6>[ 2.236322] pci 0000:00:07.3: bridge window [mem 0x80000000-0x85ffffff]
<6>[ 2.236336] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref]
<6>[ 2.236433] pci 0000:00:07.3: PME# supported from D0 D3hot D3cold
<6>[ 2.236472] pci 0000:00:07.3: PTM enabled (root), 4ns granularity
<6>[ 2.241778] pci 0000:00:08.0: [8086:7e4c] type 00 class 0x088000 conventional PCI endpoint
<6>[ 2.241822] pci 0000:00:08.0: BAR 0 [mem 0x501a2e3000-0x501a2e3fff 64bit]
<6>[ 2.242252] pci 0000:00:0a.0: [8086:7d0d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
<6>[ 2.242280] pci 0000:00:0a.0: BAR 0 [mem 0x501a240000-0x501a27ffff 64bit]
<6>[ 2.242292] pci 0000:00:0a.0: enabling Extended Tags
<6>[ 2.242488] pci 0000:00:0b.0: [8086:7d1d] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint
<6>[ 2.242518] pci 0000:00:0b.0: BAR 0 [mem 0x5010000000-0x5017ffffff 64bit]
<6>[ 2.242526] pci 0000:00:0b.0: BAR 4 [mem 0x501a2e2000-0x501a2e2fff 64bit]
<6>[ 2.243018] pci 0000:00:0d.0: [8086:7ec0] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 2.243095] pci 0000:00:0d.0: BAR 0 [mem 0x501a2c0000-0x501a2cffff 64bit]
<6>[ 2.243184] pci 0000:00:0d.0: PME# supported from D3hot D3cold
<6>[ 2.245088] pci 0000:00:0d.3: [8086:7ec3] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 2.245190] pci 0000:00:0d.3: BAR 0 [mem 0x501a200000-0x501a23ffff 64bit]
<6>[ 2.245198] pci 0000:00:0d.3: BAR 2 [mem 0x501a2e1000-0x501a2e1fff 64bit]
<6>[ 2.245255] pci 0000:00:0d.3: supports D1 D2
<6>[ 2.245259] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.246744] pci 0000:00:12.0: [8086:7e45] type 00 class 0x070000 conventional PCI endpoint
<6>[ 2.246783] pci 0000:00:12.0: BAR 0 [mem 0x501a2b0000-0x501a2bffff 64bit]
<6>[ 2.246833] pci 0000:00:12.0: PME# supported from D0 D3hot
<6>[ 2.249956] pci 0000:00:14.0: [8086:7e7d] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 2.249998] pci 0000:00:14.0: BAR 0 [mem 0x501a2a0000-0x501a2affff 64bit]
<6>[ 2.250050] pci 0000:00:14.0: PME# supported from D3hot D3cold
<6>[ 2.252209] pci 0000:00:14.2: [8086:7e7f] type 00 class 0x050000 conventional PCI endpoint
<6>[ 2.252258] pci 0000:00:14.2: BAR 0 [mem 0x501a2d4000-0x501a2d7fff 64bit]
<6>[ 2.252266] pci 0000:00:14.2: BAR 2 [mem 0x501a2e0000-0x501a2e0fff 64bit]
<6>[ 2.252560] pci 0000:00:15.0: [8086:7e78] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.252641] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.254160] pci 0000:00:15.1: [8086:7e79] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.254240] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.255801] pci 0000:00:15.2: [8086:7e7a] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.255918] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.257530] pci 0000:00:15.3: [8086:7e7b] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.257611] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.259073] pci 0000:00:16.0: [8086:7e70] type 00 class 0x078000 conventional PCI endpoint
<6>[ 2.259127] pci 0000:00:16.0: BAR 0 [mem 0x501a2db000-0x501a2dbfff 64bit]
<6>[ 2.259188] pci 0000:00:16.0: PME# supported from D3hot
<6>[ 2.264101] pci 0000:00:16.3: [8086:7e73] type 00 class 0x070002 conventional PCI endpoint
<6>[ 2.264157] pci 0000:00:16.3: BAR 0 [io 0x3020-0x3027]
<6>[ 2.264169] pci 0000:00:16.3: BAR 1 [mem 0x8c121000-0x8c121fff]
<6>[ 2.264586] pci 0000:00:19.0: [8086:7e50] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.264678] pci 0000:00:19.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.265571] pci 0000:00:19.1: [8086:7e51] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.265664] pci 0000:00:19.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.268105] pci 0000:00:1f.0: [8086:7e02] type 00 class 0x060100 conventional PCI endpoint
<6>[ 2.270517] pci 0000:00:1f.3: [8086:7e28] type 00 class 0x040100 conventional PCI endpoint
<6>[ 2.270640] pci 0000:00:1f.3: BAR 0 [mem 0x501a2d0000-0x501a2d3fff 64bit]
<6>[ 2.270661] pci 0000:00:1f.3: BAR 4 [mem 0x501a000000-0x501a1fffff 64bit]
<6>[ 2.270786] pci 0000:00:1f.3: PME# supported from D3hot D3cold
<6>[ 2.271479] pci 0000:00:1f.4: [8086:7e22] type 00 class 0x0c0500 conventional PCI endpoint
<6>[ 2.271540] pci 0000:00:1f.4: BAR 0 [mem 0x501a2d8000-0x501a2d80ff 64bit]
<6>[ 2.271557] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf]
<6>[ 2.273768] pci 0000:00:1f.5: [8086:7e23] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.273890] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
<6>[ 2.274206] pci 0000:00:1f.6: [8086:550a] type 00 class 0x020000 conventional PCI endpoint
<6>[ 2.274294] pci 0000:00:1f.6: BAR 0 [mem 0x8c100000-0x8c11ffff]
<6>[ 2.274391] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
<6>[ 2.276899] pci 0000:01:00.0: [15b7:501e] type 00 class 0x010802 PCIe Endpoint
<6>[ 2.277066] pci 0000:01:00.0: BAR 0 [mem 0x8c000000-0x8c003fff 64bit]
<6>[ 2.278704] pci 0000:00:06.0: PCI bridge to [bus 01]
<6>[ 2.279033] pci 0000:00:07.0: PCI bridge to [bus 02-2b]
<6>[ 2.279314] pci 0000:00:07.3: PCI bridge to [bus 2c-55]
<6>[ 2.688758] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1)
<6>[ 7.435358] Low-power S0 idle used by default for system suspend
<6>[ 7.513404] ACPI: EC: interrupt unblocked
<6>[ 7.513415] ACPI: EC: event unblocked
<6>[ 7.513447] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 7.513454] ACPI: EC: GPE=0x6e
<6>[ 7.513460] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete
<6>[ 7.513471] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
<6>[ 7.513962] iommu: Default domain type: Translated
<6>[ 7.513962] iommu: DMA domain TLB invalidation policy: lazy mode
<5>[ 7.514860] SCSI subsystem initialized
<7>[ 7.514936] libata version 3.00 loaded.
<6>[ 7.515051] ACPI: bus type USB registered
<6>[ 7.516211] usbcore: registered new interface driver usbfs
<6>[ 7.516256] usbcore: registered new interface driver hub
<6>[ 7.516406] usbcore: registered new device driver usb
<6>[ 7.516557] pps_core: LinuxPPS API ver. 1 registered
<6>[ 7.516562] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[ 7.516586] PTP clock support registered
<6>[ 7.516891] EDAC MC: Ver: 3.0.0
<6>[ 7.517883] efivars: Registered efivars operations
<6>[ 7.518577] NetLabel: Initializing
<6>[ 7.518584] NetLabel: domain hash size = 128
<6>[ 7.518589] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
<6>[ 7.518681] NetLabel: unlabeled traffic allowed by default
<6>[ 7.518701] mctp: management component transport protocol core
<6>[ 7.518708] NET: Registered PF_MCTP protocol family
<6>[ 7.518756] PCI: Using ACPI for IRQ routing
<7>[ 7.530586] PCI: pci_cache_line_size set to 64 bytes
<6>[ 7.530832] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
<7>[ 7.531114] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
<7>[ 7.531123] e820: reserve RAM buffer [mem 0x5bd45000-0x5bffffff]
<7>[ 7.531126] e820: reserve RAM buffer [mem 0x5bd9b000-0x5bffffff]
<7>[ 7.531128] e820: reserve RAM buffer [mem 0x60a3f000-0x63ffffff]
<6>[ 7.532014] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6>[ 7.532014] pci 0000:00:02.0: vgaarb: bridge control possible
<6>[ 7.532014] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
<6>[ 7.532014] vgaarb: loaded
<6>[ 7.532047] clocksource: Switched to clocksource tsc-early
<5>[ 7.539328] VFS: Disk quotas dquot_6.6.0
<6>[ 7.539357] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[ 7.540354] AppArmor: AppArmor Filesystem Enabled
<6>[ 7.540526] pnp: PnP ACPI init
<6>[ 7.541504] system 00:00: [io 0x0680-0x069f] has been reserved
<6>[ 7.541515] system 00:00: [io 0x164e-0x164f] has been reserved
<6>[ 7.542088] system 00:01: [io 0x1854-0x1857] has been reserved
<6>[ 7.543558] system 00:03: [io 0x06a4] has been reserved
<6>[ 7.543568] system 00:03: [io 0x06a0] has been reserved
<4>[ 7.564251] pnp 00:04: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref]
<4>[ 7.564264] pnp 00:04: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref]
<6>[ 7.564390] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved
<6>[ 7.564400] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved
<6>[ 7.564413] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved
<6>[ 7.564424] system 00:04: [mem 0xfc800000-0xfc81ffff] could not be reserved
<6>[ 7.564434] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved
<6>[ 7.564442] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved
<6>[ 7.570193] system 00:05: [io 0x2000-0x20fe] has been reserved
<4>[ 7.571235] pnp 00:07: disabling [mem 0x00000000-0x0009cfff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref]
<6>[ 7.574082] pnp: PnP ACPI: found 8 devices
<6>[ 7.589173] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<6>[ 7.589557] NET: Registered PF_INET protocol family
<6>[ 7.589900] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 7.593857] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear)
<6>[ 7.594101] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[ 7.594449] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 7.595732] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage)
<6>[ 7.597263] TCP: Hash tables configured (established 262144 bind 65536)
<6>[ 7.598058] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 7.599150] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 7.600343] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[ 7.600430] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2
<6>[ 7.600485] pci 0000:00:02.0: VF BAR 0 [mem 0x501b000000-0x5021ffffff 64bit pref]: assigned
<6>[ 7.600507] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned
<6>[ 7.600519] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff]: assigned
<6>[ 7.600531] pci 0000:00:15.0: BAR 0 [mem 0x501a2d9000-0x501a2d9fff 64bit]: assigned
<6>[ 7.600583] pci 0000:00:15.1: BAR 0 [mem 0x501a2da000-0x501a2dafff 64bit]: assigned
<6>[ 7.600636] pci 0000:00:15.2: BAR 0 [mem 0x501a2dc000-0x501a2dcfff 64bit]: assigned
<6>[ 7.600725] pci 0000:00:15.3: BAR 0 [mem 0x501a2dd000-0x501a2ddfff 64bit]: assigned
<6>[ 7.600778] pci 0000:00:19.0: BAR 0 [mem 0x501a2de000-0x501a2defff 64bit]: assigned
<6>[ 7.600829] pci 0000:00:19.1: BAR 0 [mem 0x501a2df000-0x501a2dffff 64bit]: assigned
<6>[ 7.600881] pci 0000:00:1f.5: BAR 0 [mem 0x8c120000-0x8c120fff]: assigned
<6>[ 7.600916] pci 0000:00:06.0: PCI bridge to [bus 01]
<6>[ 7.600931] pci 0000:00:06.0: bridge window [mem 0x8c000000-0x8c0fffff]
<6>[ 7.600950] pci 0000:00:07.0: PCI bridge to [bus 02-2b]
<6>[ 7.600975] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]
<6>[ 7.600989] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff]
<6>[ 7.601002] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref]
<6>[ 7.601026] pci 0000:00:07.3: PCI bridge to [bus 2c-55]
<6>[ 7.601036] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff]
<6>[ 7.601049] pci 0000:00:07.3: bridge window [mem 0x80000000-0x85ffffff]
<6>[ 7.601062] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref]
<6>[ 7.601080] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
<6>[ 7.601091] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
<6>[ 7.601102] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[ 7.601113] pci_bus 0000:00: resource 7 [mem 0x80000000-0xbfffffff window]
<6>[ 7.601124] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x3ffbfffffff window]
<6>[ 7.601137] pci_bus 0000:01: resource 1 [mem 0x8c000000-0x8c0fffff]
<6>[ 7.601148] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
<6>[ 7.601157] pci_bus 0000:02: resource 1 [mem 0x86000000-0x8bffffff]
<6>[ 7.601168] pci_bus 0000:02: resource 2 [mem 0x4010000000-0x480fffffff 64bit pref]
<6>[ 7.601181] pci_bus 0000:2c: resource 0 [io 0x5000-0x5fff]
<6>[ 7.601191] pci_bus 0000:2c: resource 1 [mem 0x80000000-0x85ffffff]
<6>[ 7.601201] pci_bus 0000:2c: resource 2 [mem 0x4810000000-0x500fffffff 64bit pref]
<6>[ 7.603269] pci 0000:00:0d.0: enabling device (0000 -> 0002)
<6>[ 7.606362] PCI: CLS 0 bytes, default 64
<6>[ 7.606514] DMAR: No RMRR found
<6>[ 7.606531] DMAR: No ATSR found
<6>[ 7.606538] DMAR: dmar0: Using Queued invalidation
<6>[ 7.606576] DMAR: dmar1: Using Queued invalidation
<6>[ 7.607934] pci 0000:00:02.0: Adding to iommu group 0
<6>[ 7.609951] pci 0000:00:00.0: Adding to iommu group 1
<6>[ 7.610051] pci 0000:00:04.0: Adding to iommu group 2
<6>[ 7.610137] pci 0000:00:05.0: Adding to iommu group 3
<6>[ 7.610250] pci 0000:00:06.0: Adding to iommu group 4
<6>[ 7.610357] pci 0000:00:07.0: Adding to iommu group 5
<6>[ 7.610478] pci 0000:00:07.3: Adding to iommu group 6
<6>[ 7.610564] pci 0000:00:08.0: Adding to iommu group 7
<6>[ 7.610646] pci 0000:00:0a.0: Adding to iommu group 8
<6>[ 7.610744] pci 0000:00:0b.0: Adding to iommu group 9
<6>[ 7.610861] pci 0000:00:0d.0: Adding to iommu group 10
<6>[ 7.610928] pci 0000:00:0d.3: Adding to iommu group 10
<6>[ 7.611029] pci 0000:00:12.0: Adding to iommu group 11
<6>[ 7.611136] pci 0000:00:14.0: Adding to iommu group 12
<6>[ 7.611210] pci 0000:00:14.2: Adding to iommu group 12
<6>[ 7.611344] pci 0000:00:15.0: Adding to iommu group 13
<6>[ 7.611419] pci 0000:00:15.1: Adding to iommu group 13
<6>[ 7.611483] pci 0000:00:15.2: Adding to iommu group 13
<6>[ 7.611548] pci 0000:00:15.3: Adding to iommu group 13
<6>[ 7.611659] pci 0000:00:16.0: Adding to iommu group 14
<6>[ 7.611734] pci 0000:00:16.3: Adding to iommu group 14
<6>[ 7.611845] pci 0000:00:19.0: Adding to iommu group 15
<6>[ 7.611913] pci 0000:00:19.1: Adding to iommu group 15
<6>[ 7.612062] pci 0000:00:1f.0: Adding to iommu group 16
<6>[ 7.612135] pci 0000:00:1f.3: Adding to iommu group 16
<6>[ 7.612215] pci 0000:00:1f.4: Adding to iommu group 16
<6>[ 7.612285] pci 0000:00:1f.5: Adding to iommu group 16
<6>[ 7.612358] pci 0000:00:1f.6: Adding to iommu group 16
<6>[ 7.612481] pci 0000:01:00.0: Adding to iommu group 17
<6>[ 7.638262] DMAR: Intel(R) Virtualization Technology for Directed I/O
<6>[ 7.638276] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[ 7.638287] software IO TLB: mapped [mem 0x0000000056dec000-0x000000005adec000] (64MB)
<6>[ 7.639961] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns
<6>[ 7.640046] clocksource: Switched to clocksource tsc
<6>[ 7.640217] platform rtc_cmos: registered platform RTC device (no PNP device found)
<5>[ 7.647878] Initialise system trusted keyrings
<5>[ 7.647972] Key type blacklist registered
<6>[ 7.648225] workingset: timestamp_bits=36 max_order=23 bucket_order=0
<6>[ 7.660217] zbud: loaded
<6>[ 7.661846] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 7.661987] ntfs3: Enabled Linux POSIX ACLs support
<6>[ 7.661996] ntfs3: Read-only LZX/Xpress compression included
<5>[ 7.662477] integrity: Platform Keyring initialized
<5>[ 7.662502] integrity: Machine keyring initialized
<6>[ 7.670709] xor: automatically using best checksumming function avx
<5>[ 7.670723] Key type asymmetric registered
<5>[ 7.670737] Asymmetric key parser 'x509' registered
<6>[ 7.670879] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
<6>[ 7.671212] io scheduler mq-deadline registered
<6>[ 7.672532] ledtrig-cpu: registered to indicate activity on CPUs
<6>[ 7.674983] pcieport 0000:00:06.0: PME: Signaling with IRQ 122
<6>[ 7.677088] pcieport 0000:00:07.0: PME: Signaling with IRQ 123
<6>[ 7.678919] pcieport 0000:00:07.3: PME: Signaling with IRQ 124
<6>[ 7.679242] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<6>[ 7.687339] ACPI: AC: AC Adapter [ADP1] (on-line)
<6>[ 7.687723] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:00/PNP0C0D:00/input/input0
<6>[ 7.688075] ACPI: button: Lid Switch [LID0]
<6>[ 7.688391] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
<6>[ 7.688579] ACPI: button: Sleep Button [SLPB]
<6>[ 7.688837] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
<6>[ 7.689001] ACPI: button: Power Button [PWRB]
<6>[ 7.828786] thermal LNXTHERM:00: registered as thermal_zone0
<6>[ 7.828795] ACPI: thermal: Thermal Zone [TZ00] (46 C)
<6>[ 7.829802] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[ 7.830328] ACPI: battery: Slot [BAT1] (battery absent)
<6>[ 7.831761] ACPI: battery: Slot [BAT0] (battery present)
<6>[ 7.852492] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
<6>[ 7.861994] serial 0000:00:12.0: enabling device (0000 -> 0002)
<6>[ 7.863451] serial 0000:00:16.3: enabling device (0001 -> 0003)
<6>[ 7.885778] 0000:00:16.3: ttyS4 at I/O 0x3020 (irq = 19, base_baud = 115200) is a 16550A
<4>[ 7.887811] hpet_acpi_add: no address or irqs in _CRS
<6>[ 7.887923] Linux agpgart interface v0.103
<6>[ 7.915595] ACPI: bus type drm_connector registered
<6>[ 7.944304] loop: module loaded
<6>[ 8.002723] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
<6>[ 8.115704] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
<6>[ 8.241735] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
<6>[ 8.353801] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
<6>[ 8.463799] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002)
<6>[ 8.603733] intel-lpss 0000:00:19.1: enabling device (0000 -> 0002)
<5>[ 8.704069] Key type psk registered
<6>[ 8.707025] nvme 0000:01:00.0: platform quirk: setting simple suspend
<6>[ 8.707833] nvme nvme0: pci function 0000:01:00.0
<6>[ 8.707878] tun: Universal TUN/TAP device driver, 1.6
<6>[ 8.708993] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 8.709110] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
<6>[ 8.711193] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 8.713145] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 8.713174] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
<6>[ 8.713202] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 8.713626] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 8.713649] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 8.713662] usb usb1: Product: xHCI Host Controller
<6>[ 8.713671] usb usb1: Manufacturer: Linux 6.14.0-rc7-CI_DRM_16301-ga123616cf3af+ xhci-hcd
<6>[ 8.713691] usb usb1: SerialNumber: 0000:00:0d.0
<6>[ 8.714704] hub 1-0:1.0: USB hub found
<6>[ 8.714800] hub 1-0:1.0: 1 port detected
<6>[ 8.719361] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 8.719380] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 8.719393] usb usb2: Product: xHCI Host Controller
<6>[ 8.719402] usb usb2: Manufacturer: Linux 6.14.0-rc7-CI_DRM_16301-ga123616cf3af+ xhci-hcd
<6>[ 8.719415] usb usb2: SerialNumber: 0000:00:0d.0
<6>[ 8.720234] hub 2-0:1.0: USB hub found
<6>[ 8.720305] hub 2-0:1.0: 4 ports detected
<6>[ 8.755488] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 8.755524] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
<6>[ 8.757450] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 8.759726] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 8.759753] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
<6>[ 8.759775] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 8.760004] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 8.760020] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 8.760033] usb usb3: Product: xHCI Host Controller
<6>[ 8.760042] usb usb3: Manufacturer: Linux 6.14.0-rc7-CI_DRM_16301-ga123616cf3af+ xhci-hcd
<6>[ 8.760056] usb usb3: SerialNumber: 0000:00:14.0
<6>[ 8.760791] hub 3-0:1.0: USB hub found
<6>[ 8.760845] hub 3-0:1.0: 12 ports detected
<6>[ 8.782914] nvme nvme0: allocated 64 MiB host memory buffer (1 segment).
<6>[ 8.803351] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 8.803370] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 8.803382] usb usb4: Product: xHCI Host Controller
<6>[ 8.803391] usb usb4: Manufacturer: Linux 6.14.0-rc7-CI_DRM_16301-ga123616cf3af+ xhci-hcd
<6>[ 8.803405] usb usb4: SerialNumber: 0000:00:14.0
<6>[ 8.805102] hub 4-0:1.0: USB hub found
<6>[ 8.805156] hub 4-0:1.0: 2 ports detected
<6>[ 8.810787] usbcore: registered new interface driver usb-storage
<6>[ 8.810944] usbcore: registered new interface driver usbserial_generic
<6>[ 8.811042] usbserial: USB Serial support registered for generic
<6>[ 8.811105] usbcore: registered new interface driver ftdi_sio
<6>[ 8.811146] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[ 8.811211] usbcore: registered new interface driver pl2303
<6>[ 8.811251] usbserial: USB Serial support registered for pl2303
<6>[ 8.811393] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>[ 8.811404] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<6>[ 8.817890] nvme nvme0: 16/0/0 default/read/poll queues
<6>[ 8.827605] nvme0n1: p1 p2
<3>[ 9.512826] i8042: Can't read CTR while initializing i8042
<3>[ 9.512839] i8042 i8042: probe with driver i8042 failed with error -5
<6>[ 9.513519] mousedev: PS/2 mouse device common for all mice
<6>[ 9.515002] rtc_cmos rtc_cmos: RTC can wake from S4
<6>[ 9.516801] rtc_cmos rtc_cmos: registered as rtc0
<6>[ 9.517000] rtc_cmos rtc_cmos: setting system clock to 2025-03-22T00:55:19 UTC (1742604919)
<6>[ 9.517176] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
<6>[ 9.517232] i2c_dev: i2c /dev entries driver
<6>[ 9.522596] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0)
<6>[ 9.522613] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
<4>[ 9.522626] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
<6>[ 9.522677] device-mapper: uevent: version 1.0.3
<6>[ 9.523092] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
<6>[ 9.523241] platform eisa.0: Probing EISA bus 0
<4>[ 9.523256] platform eisa.0: EISA: Cannot allocate resource for mainboard
<4>[ 9.523274] platform eisa.0: Cannot allocate resource for EISA slot 1
<4>[ 9.523290] platform eisa.0: Cannot allocate resource for EISA slot 2
<4>[ 9.523305] platform eisa.0: Cannot allocate resource for EISA slot 3
<4>[ 9.523320] platform eisa.0: Cannot allocate resource for EISA slot 4
<4>[ 9.523335] platform eisa.0: Cannot allocate resource for EISA slot 5
<4>[ 9.523350] platform eisa.0: Cannot allocate resource for EISA slot 6
<4>[ 9.523364] platform eisa.0: Cannot allocate resource for EISA slot 7
<4>[ 9.523379] platform eisa.0: Cannot allocate resource for EISA slot 8
<6>[ 9.523391] platform eisa.0: EISA: Detected 0 cards
<6>[ 9.523402] intel_pstate: Intel P-state driver initializing
<6>[ 9.532223] intel_pstate: HWP enabled
<6>[ 9.532231] sdhci: Secure Digital Host Controller Interface driver
<6>[ 9.532236] sdhci: Copyright(c) Pierre Ossman
<6>[ 9.532330] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 9.535018] drop_monitor: Initializing network drop monitor service
<6>[ 9.535237] NET: Registered PF_INET6 protocol family
<6>[ 9.538133] Segment Routing with IPv6
<6>[ 9.538176] In-situ OAM (IOAM) with IPv6
<6>[ 9.538222] NET: Registered PF_PACKET protocol family
<5>[ 9.538380] Key type dns_resolver registered
<4>[ 9.548637] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<6>[ 9.549977] microcode: Current revision: 0x0000001c
<6>[ 9.551643] IPI shorthand broadcast: enabled
<6>[ 9.562321] sched_clock: Marking stable (9553000869, 8684743)->(9647802449, -86116837)
<6>[ 9.563923] registered taskstats version 1
<5>[ 9.567095] Loading compiled-in X.509 certificates
<6>[ 9.601433] Demotion targets for Node 0: null
<6>[ 9.601910] kmemleak: Kernel memory leak detector initialized (mem pool available: 14933)
<6>[ 9.601914] kmemleak: Automatic memory scanning thread started
<5>[ 9.602174] Key type .fscrypt registered
<5>[ 9.602179] Key type fscrypt-provisioning registered
<6>[ 9.605210] Btrfs loaded, zoned=yes, fsverity=yes
<5>[ 9.605327] Key type trusted registered
<5>[ 9.609355] Key type encrypted registered
<6>[ 9.609364] AppArmor: AppArmor sha256 policy hashing enabled
<5>[ 9.609485] Loading compiled-in module X.509 certificates
<5>[ 9.610217] Loaded X.509 cert 'Build time autogenerated kernel key: 7562d9ebf78f36c600f88a76378ad2cd01f0c9ee'
<6>[ 9.610229] ima: Allocated hash algorithm: sha256
<6>[ 9.629035] ima: No architecture policies found
<6>[ 9.629148] evm: Initialising EVM extended attributes:
<6>[ 9.629153] evm: security.selinux
<6>[ 9.629156] evm: security.SMACK64
<6>[ 9.629159] evm: security.SMACK64EXEC
<6>[ 9.629162] evm: security.SMACK64TRANSMUTE
<6>[ 9.629165] evm: security.SMACK64MMAP
<6>[ 9.629168] evm: security.apparmor
<6>[ 9.629171] evm: security.ima
<6>[ 9.629174] evm: security.capability
<6>[ 9.629177] evm: HMAC attrs: 0x1
<6>[ 9.631345] PM: Magic number: 1:522:911
<6>[ 9.631385] port serial8250:0.5: hash matches
<6>[ 9.631643] printk: legacy console [netcon0] enabled
<6>[ 9.631649] netconsole: network logging started
<6>[ 9.632152] RAS: Correctable Errors collector initialized.
<6>[ 9.632348] clk: Disabling unused clocks
<6>[ 9.632359] PM: genpd: Disabling unused power domains
<6>[ 9.633488] md: Waiting for all devices to be available before autodetect
<6>[ 9.633493] md: If you don't use raid, use raid=noautodetect
<6>[ 9.633498] md: Autodetecting RAID arrays.
<6>[ 9.633506] md: autorun ...
<6>[ 9.633509] md: ... autorun DONE.
<6>[ 9.705736] EXT4-fs (nvme0n1p2): mounted filesystem 025420cd-c844-4e26-bc37-f17331faa4f5 ro with ordered data mode. Quota mode: none.
<6>[ 9.705805] VFS: Mounted root (ext4 filesystem) readonly on device 259:2.
<6>[ 9.707002] devtmpfs: mounted
<6>[ 9.719195] Freeing unused decrypted memory: 2028K
<6>[ 9.720497] Freeing unused kernel image (initmem) memory: 5628K
<6>[ 9.720524] Write protecting the kernel read-only data: 34816k
<6>[ 9.721607] Freeing unused kernel image (text/rodata gap) memory: 280K
<6>[ 9.722177] Freeing unused kernel image (rodata/data gap) memory: 988K
<6>[ 9.728195] x86/mm: Checked W+X mappings: passed, no W+X pages found.
<6>[ 9.728565] Run /sbin/init as init process
<7>[ 9.728570] with arguments:
<7>[ 9.728571] /sbin/init
<7>[ 9.728572] with environment:
<7>[ 9.728573] HOME=/
<7>[ 9.728574] TERM=linux
<7>[ 9.728574] BOOT_IMAGE=/boot/drm_intel
<6>[ 9.731957] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
<6>[ 9.745787] usb 4-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
<6>[ 9.745817] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
<6>[ 9.745831] usb 4-1: Product: USB 10/100/1000 LAN
<6>[ 9.745841] usb 4-1: Manufacturer: Realtek
<6>[ 9.745850] usb 4-1: SerialNumber: 000001
<7>[ 9.796232] systemd[1]: Inserted module 'autofs4'
<7>[ 9.822103] systemd[1]: systemd 255.4-1ubuntu8.5 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
<7>[ 9.822147] systemd[1]: Detected architecture x86-64.
<7>[ 9.824101] systemd[1]: Hostname set to <shard-mtlp-2>.
<7>[ 10.106303] systemd[1]: Queued start job for default target graphical.target.
<7>[ 10.141569] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
<7>[ 10.143418] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
<7>[ 10.144982] systemd[1]: Created slice user.slice - User and Session Slice.
<7>[ 10.145257] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
<7>[ 10.145982] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
<7>[ 10.146117] systemd[1]: Expecting device dev-disk-by\x2duuid-E53D\x2dCF06.device - /dev/disk/by-uuid/E53D-CF06...
<7>[ 10.146214] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
<7>[ 10.146306] systemd[1]: Reached target slices.target - Slice Units.
<7>[ 10.146382] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
<7>[ 10.146455] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
<7>[ 10.146535] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
<7>[ 10.146819] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
<7>[ 10.147219] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
<7>[ 10.147533] systemd[1]: Listening on multipathd.socket - multipathd control socket.
<7>[ 10.147898] systemd[1]: Listening on syslog.socket - Syslog Socket.
<7>[ 10.148185] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
<7>[ 10.148423] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
<7>[ 10.149240] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
<7>[ 10.149622] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
<7>[ 10.149948] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
<7>[ 10.150162] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 10.150497] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
<7>[ 10.150807] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
<7>[ 10.154785] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
<7>[ 10.159699] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
<7>[ 10.162308] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
<7>[ 10.165583] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
<7>[ 10.171987] systemd[1]: Starting systemd-journald.service - Journal Service...
<7>[ 10.174820] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
<7>[ 10.177960] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
<7>[ 10.181129] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
<7>[ 10.185465] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
<7>[ 10.188135] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
<7>[ 10.191766] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
<7>[ 10.196564] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
<7>[ 10.199635] systemd-journald[308]: Collecting audit messages is disabled.
<7>[ 10.199737] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
<7>[ 10.202890] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
<7>[ 10.207175] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
<7>[ 10.208509] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
<6>[ 10.211297] pstore: Using crash dump compression: deflate
<7>[ 10.212134] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
<6>[ 10.214999] pstore: Registered efi_pstore as persistent store backend
<7>[ 10.216536] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
<7>[ 10.216622] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 10.216707] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 10.220748] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
<6>[ 10.222772] fuse: init (API version 7.42)
<7>[ 10.226766] systemd[1]: Started systemd-journald.service - Journal Service.
<6>[ 10.372084] EXT4-fs (nvme0n1p2): re-mounted 025420cd-c844-4e26-bc37-f17331faa4f5 r/w. Quota mode: none.
<6>[ 10.407234] Adding 8388604k swap on /swap.img. Priority:-2 extents:66 across:354877440k SS
<7>[ 10.418993] systemd-journald[308]: Received client request to flush runtime journal.
<7>[ 10.443568] systemd-journald[308]: /var/log/journal/04d478aecf7541429ca46e6ba0f49fb5/system.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 10.443584] systemd-journald[308]: Rotating system journal.
<4>[ 11.117321] nvme nvme0: using unchecked data buffer
<6>[ 11.276631] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002)
<6>[ 11.316779] input: Intel HID events as /devices/platform/INTC1077:00/input/input3
<6>[ 11.336544] intel-hid INTC1077:00: platform supports 5 button array
<6>[ 11.346759] input: Intel HID 5 button array as /devices/platform/INTC1077:00/input/input4
<6>[ 11.426947] pci 0000:00:08.0: Setting to D3hot
<6>[ 11.439151] pci 0000:00:05.0: Setting to D3hot
<6>[ 11.451087] pci 0000:00:0b.0: Setting to D3hot
<6>[ 11.477235] pci 0000:00:14.2: enabling device (0000 -> 0002)
<3>[ 11.480473] int3472-tps68470 i2c-INT3472:0d: TPS68470 init error -121
<3>[ 11.488623] int3472-tps68470 i2c-INT3472:0d: probe with driver int3472-tps68470 failed with error -121
<4>[ 11.553332] resource: resource sanity check: requesting [mem 0x00000000fedc0000-0x00000000fedcffff], which spans more than pnp 00:04 [mem 0xfedc0000-0xfedc7fff]
<4>[ 11.553351] caller igen6_probe+0x196/0x940 [igen6_edac] mapping multiple BARs
<6>[ 11.564618] ACPI: bus type thunderbolt registered
<6>[ 11.567595] EDAC MC0: Giving out device to module igen6_edac controller Intel_client_SoC MC#0: DEV 0000:00:00.0 (INTERRUPT)
<6>[ 11.569855] e1000e: Intel(R) PRO/1000 Network Driver
<6>[ 11.569860] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<6>[ 11.577363] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
<6>[ 11.585721] i801_smbus 0000:00:1f.4: SPD Write Disable is set
<6>[ 11.585878] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
<6>[ 11.587448] EDAC MC1: Giving out device to module igen6_edac controller Intel_client_SoC MC#1: DEV 0000:00:00.0 (INTERRUPT)
<7>[ 11.587602] EDAC igen6 MC1: HANDLING IBECC MEMORY ERROR
<7>[ 11.587607] EDAC igen6 MC1: ADDR 0x7fffffffe0
<7>[ 11.587610] EDAC igen6 MC0: HANDLING IBECC MEMORY ERROR
<7>[ 11.587612] EDAC igen6 MC0: ADDR 0x7fffffffe0
<6>[ 11.591227] EDAC igen6: v2.5.1
<4>[ 11.593418] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform
<6>[ 11.594087] intel_pmc_core INT33A1:00: initialized
<6>[ 11.605449] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002)
<6>[ 11.624330] idma64 idma64.0: Found Intel integrated DMA 64-bit
<5>[ 11.635183] audit: type=1400 audit(1742604921.616:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=565 comm="apparmor_parser"
<5>[ 11.635549] audit: type=1400 audit(1742604921.616:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=568 comm="apparmor_parser"
<5>[ 11.635905] audit: type=1400 audit(1742604921.617:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=564 comm="apparmor_parser"
<5>[ 11.636297] audit: type=1400 audit(1742604921.617:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=567 comm="apparmor_parser"
<6>[ 11.637196] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_37xx_v0.0.bin, version: 20230726*MTL_CLIENT_SILICON-release*2101*ci_tag_mtl_pv_vpu_rc_20230726_2101*648a666b8b9
<6>[ 11.637202] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS
<5>[ 11.638070] audit: type=1400 audit(1742604921.619:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=569 comm="apparmor_parser"
<5>[ 11.639604] audit: type=1400 audit(1742604921.620:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=570 comm="apparmor_parser"
<5>[ 11.642161] audit: type=1400 audit(1742604921.623:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=571 comm="apparmor_parser"
<5>[ 11.644812] audit: type=1400 audit(1742604921.626:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=572 comm="apparmor_parser"
<5>[ 11.645361] audit: type=1400 audit(1742604921.626:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=573 comm="apparmor_parser"
<5>[ 11.646561] audit: type=1400 audit(1742604921.627:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=574 comm="apparmor_parser"
<6>[ 11.657536] idma64 idma64.1: Found Intel integrated DMA 64-bit
<6>[ 11.703574] idma64 idma64.2: Found Intel integrated DMA 64-bit
<6>[ 11.731699] idma64 idma64.3: Found Intel integrated DMA 64-bit
<6>[ 11.793645] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
<6>[ 11.869644] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0
<6>[ 11.874230] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88
<6>[ 11.874235] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
<6>[ 11.874361] e1000e 0000:00:1f.6 eth0: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF
<6>[ 12.020289] intel_rapl_msr: PL4 support detected.
<6>[ 12.021245] intel_rapl_common: Found RAPL domain package
<6>[ 12.021251] intel_rapl_common: Found RAPL domain core
<6>[ 12.021254] intel_rapl_common: Found RAPL domain uncore
<6>[ 12.021257] intel_rapl_common: Found RAPL domain psys
<6>[ 12.470438] usbcore: registered new device driver r8152-cfgselector
<6>[ 12.491922] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
<6>[ 12.491930] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
<6>[ 12.491932] RAPL PMU: hw unit of domain package 2^-14 Joules
<6>[ 12.491933] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
<6>[ 12.491935] RAPL PMU: hw unit of domain psys 2^-14 Joules
<6>[ 12.517460] cryptd: max_cpu_qlen set to 1000
<6>[ 12.519783] hid: raw HID events driver (C) Jiri Kosina
<6>[ 12.521589] e1000e 0000:00:1f.6 eno0: renamed from eth0
<6>[ 12.527844] proc_thermal_pci 0000:00:04.0: enabling device (0000 -> 0002)
<6>[ 12.534272] intel_rapl_common: Found RAPL domain package
<6>[ 12.534316] AES CTR mode by8 optimization enabled
<6>[ 12.536536] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
<4>[ 12.544583] spi-nor spi0.0: supply vcc not found, using dummy regulator
<6>[ 12.562676] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<5>[ 12.566932] Creating 1 MTD partitions on "0000:00:1f.5":
<5>[ 12.566974] 0x000000000000-0x000002000000 : "BIOS"
<6>[ 12.584482] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 12.586666] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 12.588814] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 12.590184] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 12.591847] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 12.592404] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 12.627274] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 12.632117] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 12.636085] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 12.639927] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 12.641287] r8152-cfgselector 4-1: reset SuperSpeed USB device number 2 using xhci_hcd
<6>[ 12.644076] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 12.646635] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 12.863293] r8152 4-1:1.0 eth0: v1.12.13
<6>[ 12.863470] usbcore: registered new interface driver r8152
<6>[ 12.869632] usbcore: registered new interface driver cdc_ether
<6>[ 12.873408] usbcore: registered new interface driver r8153_ecm
<6>[ 12.917822] r8152 4-1:1.0 enxe2015072f492: renamed from eth0
<4>[ 12.926171] block nvme0n1: No UUID available providing old NGUID
<6>[ 13.065736] evm: overlay not supported
<6>[ 13.169869] loop0: detected capacity change from 0 to 8
<6>[ 13.397899] Consider using thermal netlink events interface
<6>[ 15.742247] r8152 4-1:1.0 enxe2015072f492: carrier on
<4>[ 23.186908] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component
<3>[ 25.666414] ucsi_acpi USBC000:00: error -ETIMEDOUT: PPM init failed
<7>[ 32.547133] systemd-journald[308]: /var/log/journal/04d478aecf7541429ca46e6ba0f49fb5/user-1000.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 47.487898] [IGT] i915_module_load: executing
<7>[ 47.518749] [IGT] i915_module_load: starting subtest load
<4>[ 47.998615] **********************************************************
<4>[ 47.998616] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 47.998617] ** **
<4>[ 47.998618] ** trace_printk() being used. Allocating extra memory. **
<4>[ 47.998618] ** **
<4>[ 47.998619] ** This means that this is a DEBUG kernel and it is **
<4>[ 47.998620] ** unsafe for production use. **
<4>[ 47.998621] ** **
<4>[ 47.998621] ** If you see this message and you are not debugging **
<4>[ 47.998622] ** the kernel, report this immediately to your vendor! **
<4>[ 47.998623] ** **
<4>[ 47.998623] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 47.998624] **********************************************************
<5>[ 48.031038] Setting dangerous option force_probe - tainting kernel
<6>[ 48.037601] i915 0000:00:02.0: [drm] Found meteorlake (device ID 7d55) integrated display version 14.00 stepping C0
<7>[ 48.038724] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K
<7>[ 48.038948] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:no slpc:yes)
<7>[ 48.039118] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)
<7>[ 48.039325] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT
<7>[ 48.039472] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT1: Setting up Standalone Media GT
<7>[ 48.039601] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K
<7>[ 48.039804] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT1: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes)
<7>[ 48.040032] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing
<7>[ 48.040187] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 38400 kHz
<7>[ 48.040521] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vdbox enable: 0000, instances: 0000
<7>[ 48.040643] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vebox enable: 0000, instances: 0000
<7>[ 48.041087] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vdbox enable: 0005, instances: 0005
<7>[ 48.041193] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vebox enable: 0001, instances: 0001
<7>[ 48.041567] i915 0000:00:02.0: [drm:ggtt_probe_common [i915]] Using direct GSM access
<7>[ 48.041829] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M
<7>[ 48.041936] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 0M
<7>[ 48.042039] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M
<6>[ 48.042141] i915 0000:00:02.0: [drm] VT-d active for gfx access
<6>[ 48.042515] i915 0000:00:02.0: vgaarb: deactivate vga console
<6>[ 48.042838] i915 0000:00:02.0: [drm] Using Transparent Hugepages
<7>[ 48.042847] i915 0000:00:02.0: [drm:i915_gem_stolen_lmem_setup [i915]] Using direct DSM access
<7>[ 48.042991] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000078400947
<7>[ 48.043364] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 131072K, usable: 126976K
<7>[ 48.043596] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 31514 MiB [mem 0x00000000-0x7b1a86fff], io: n/a
<7>[ 48.043711] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(6): stolen-local: 124 MiB [mem 0x00800000-0x083fffff], io: 124 MiB [mem 0x70800000-0x783fffff]
<7>[ 48.044024] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x63e09018
<7>[ 48.044194] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 3.0.0
<7>[ 48.044332] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported
<7>[ 48.044467] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported
<7>[ 48.044602] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported
<7>[ 48.044754] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Mailbox #2 for backlight present
<7>[ 48.044904] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA)
<7>[ 48.045035] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num qgv points 4
<7>[ 48.045139] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 8
<7>[ 48.045243] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Watermark level 0 adjustment needed: yes
<7>[ 48.045350] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=3200 tRP=64 tRDPRE=40 tRAS=136 tRCD=64 tRC=200
<7>[ 48.045508] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=6000 tRP=112 tRDPRE=80 tRAS=0 tRCD=112 tRC=112
<7>[ 48.045659] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=16 tRCD=120 tRC=136
<7>[ 48.045822] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 3: DCLK=5600 tRP=104 tRDPRE=80 tRAS=240 tRCD=104 tRC=344
<7>[ 48.045962] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 0: num_planes=0 deratedbw=28913 peakbw: 51200
<7>[ 48.046103] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000
<7>[ 48.046239] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 48.046373] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600
<7>[ 48.046506] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 0: num_planes=0 deratedbw=35532 peakbw: 51200
<7>[ 48.046642] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000
<7>[ 48.046784] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 48.046917] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600
<7>[ 48.047051] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200
<7>[ 48.047185] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000
<7>[ 48.047317] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 48.047447] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600
<7>[ 48.047578] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200
<7>[ 48.047715] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000
<7>[ 48.047847] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 48.047979] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600
<7>[ 48.048111] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200
<7>[ 48.048242] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000
<7>[ 48.048372] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 48.048501] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600
<7>[ 48.048633] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200
<7>[ 48.048788] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000
<7>[ 48.048918] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 48.049047] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600
<7>[ 48.049620] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz
<7>[ 48.049776] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT METEORLAKE ", BDB version 253
<7>[ 48.049912] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7)
<7>[ 48.050050] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5)
<7>[ 48.050182] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100)
<7>[ 48.050312] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)
<7>[ 48.050442] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 848)
<7>[ 48.050576] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34)
<7>[ 48.050715] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers
<7>[ 48.050909] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)
<7>[ 48.051044] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366)
<7>[ 48.051182] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305)
<7>[ 48.051312] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 98, min size 136)
<7>[ 48.051441] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822)
<7>[ 48.051568] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210)
<7>[ 48.051703] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7>[ 48.051835] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2
<7>[ 48.051965] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806
<7>[ 48.052101] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6
<7>[ 48.052233] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6
<7>[ 48.052366] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2
<7>[ 48.052498] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6
<7>[ 48.052629] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6
<7>[ 48.052808] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping
<7>[ 48.052940] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[ 48.053072] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[ 48.053205] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 48.053339] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[ 48.053468] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 48.053596] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 48.053740] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a
<7>[ 48.053919] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7>[ 48.054231] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7>[ 48.054521] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 48.054867] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf
<7>[ 48.055186] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.
<7>[ 48.055367] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7>[ 48.055521] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7>[ 48.055723] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7>[ 48.055925] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<6>[ 48.056085] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
<7>[ 48.056106] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A
<7>[ 48.056275] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B
<7>[ 48.056429] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C
<7>[ 48.056588] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D
<7>[ 48.056849] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/mtl_dmc.bin
<7>[ 48.057886] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1
<7>[ 48.058800] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us
<7>[ 48.058954] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 7 (7.0 usec)
<7>[ 48.059094] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 91 (91.0 usec)
<7>[ 48.059229] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 92 (92.0 usec)
<7>[ 48.059384] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 107 (107.0 usec)
<7>[ 48.059550] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:
<7>[ 48.059564] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 108 (108.0 usec)
<7>[ 48.059771] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 161 (161.0 usec)
<7>[ 48.059806] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x86fc0
<7>[ 48.060003] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7>[ 48.060182] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f004 = 0x42c0408 (EVT_HTP)
<7>[ 48.060374] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)
<7>[ 48.060553] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x8f008 = 0x534052f4 (EVT_HTP)
<7>[ 48.060769] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 1:
<7>[ 48.060945] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f074 = 0x96fc0
<7>[ 48.061127] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)
<7>[ 48.061306] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f004 = 0x212c20f4 (EVT_HTP)
<7>[ 48.061459] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)
<7>[ 48.061640] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f008 = 0x222021e8 (EVT_HTP)
<7>[ 48.061823] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)
<7>[ 48.062026] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f00c = 0x23f422dc (EVT_HTP)
<7>[ 48.062200] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 48.062331] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f010 = 0x26ec26c0 (EVT_HTP)
<7>[ 48.062527] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 2:
<7>[ 48.062753] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f474 = 0x9efc0
<7>[ 48.062957] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)
<7>[ 48.063158] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f404 = 0xa618a5e0 (EVT_HTP)
<7>[ 48.063343] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)
<7>[ 48.063478] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f408 = 0xa70ca6d4 (EVT_HTP)
<7>[ 48.063646] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)
<7>[ 48.063829] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f40c = 0xa8e0a7c8 (EVT_HTP)
<7>[ 48.064025] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 48.064192] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f410 = 0xabd8abac (EVT_HTP)
<7>[ 48.064352] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 3:
<7>[ 48.064530] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f874 = 0x53fc0
<7>[ 48.064696] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)
<7>[ 48.064903] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f80c = 0x24a02388 (EVT_HTP)
<7>[ 48.065068] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 48.065239] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 4 display pipes available.
<7>[ 48.065277] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f810 = 0x2798276c (EVT_HTP)
<7>[ 48.065488] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 4:
<7>[ 48.065662] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5fc74 = 0x5afc0
<7>[ 48.065858] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)
<7>[ 48.066052] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5fc0c = 0x94a09388 (EVT_HTP)
<7>[ 48.066240] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5fc40 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 48.066415] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5fc10 = 0x9798976c (EVT_HTP)
<7>[ 48.068684] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 48.068919] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz
<7>[ 48.069096] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 1305600 kHz
<7>[ 48.069395] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:240:DDI A/PHY A] Using AUX CH A (VBT)
<7>[ 48.069662] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:240:DDI A/PHY A]
<7>[ 48.069906] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2
<7>[ 48.070069] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2
<7>[ 48.070239] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless
<7>[ 48.070404] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7>[ 48.070558] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300
<7>[ 48.070725] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002
<7>[ 48.070876] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName
<7>[ 48.071025] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz
<7>[ 48.071174] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7>[ 48.071350] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:240:DDI A/PHY A] initial power sequencer: PPS 0
<7>[ 48.071753] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 48.071918] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 48.072075] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 48.072227] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 48.072377] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200
<7>[ 48.072957] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 48.073604] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A
<6>[ 48.075473] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/mtl_dmc.bin (v2.23)
<7>[ 48.075417] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 48.075703] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7>[ 48.078027] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 00 c4 41 00 00 01 c0 02 00 00 00 00 0b 80
<7>[ 48.078749] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
<7>[ 48.079879] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 04 83 85 04 00
<7>[ 48.081845] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 3
<7>[ 48.082581] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] PSR2 supported
<7>[ 48.084229] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 48.090892] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7>[ 48.090903] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] ELD monitor
<7>[ 48.090908] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] ELD size 20, SAD count 0
<7>[ 48.090954] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:241:eDP-1] using preferred EDID fixed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7>[ 48.091747] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:241:eDP-1] Performing OUI wait (0 ms)
<7>[ 48.092483] i915 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [i915]] [CONNECTOR:241:eDP-1] Detected unsupported HDR backlight interface version 0
<7>[ 48.092637] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:241:eDP-1] DRRS type: none
<7>[ 48.092873] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:241:eDP-1] Using native PCH PWM for backlight control (controller=0)
<7>[ 48.093040] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:241:eDP-1] backlight initialized, enabled, brightness 192000/192000
<7>[ 48.093219] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 48.093354] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 48.093486] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 48.093610] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 48.093742] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200
<7>[ 48.093997] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 48.094256] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:249:DDI B/PHY B] Using AUX CH B (VBT)
<7>[ 48.094408] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:249:DDI B/PHY B]
<7>[ 48.094800] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:249:DDI B/PHY B]
<7>[ 48.094929] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:249:DDI B/PHY B] Using DDC pin 0x2 (VBT)
<7>[ 48.095239] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:267:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)
<7>[ 48.095490] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected)
<7>[ 48.095735] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:267:DDI TC1/PHY TC1]
<7>[ 48.096041] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:276:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)
<7>[ 48.096279] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected)
<7>[ 48.096583] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy)
<7>[ 48.096732] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:276:DDI TC2/PHY TC2]
<7>[ 48.096863] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:276:DDI TC2/PHY TC2] Using DDC pin 0xa (VBT)
<7>[ 48.097095] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:280:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)
<7>[ 48.097305] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port F/TC#3: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected)
<7>[ 48.097514] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:280:DDI TC3/PHY TC3]
<7>[ 48.097787] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:289:DDI TC4/PHY TC4] Using AUX CH USBC4 (VBT)
<7>[ 48.098004] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port G/TC#4: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected)
<7>[ 48.098233] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:289:DDI TC4/PHY TC4]
<7>[ 48.098974] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe A] hw state readout: enabled
<7>[ 48.099265] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:134:pipe B] hw state readout: disabled
<7>[ 48.099528] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:186:pipe C] hw state readout: disabled
<7>[ 48.099798] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:238:pipe D] hw state readout: disabled
<7>[ 48.099958] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:32:plane 1A] hw state readout: enabled, pipe A
<7>[ 48.100120] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:41:plane 2A] hw state readout: disabled, pipe A
<7>[ 48.100281] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:50:plane 3A] hw state readout: disabled, pipe A
<7>[ 48.100420] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 4A] hw state readout: disabled, pipe A
<7>[ 48.100557] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 5A] hw state readout: disabled, pipe A
<7>[ 48.100732] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor A] hw state readout: disabled, pipe A
<7>[ 48.100870] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1B] hw state readout: disabled, pipe B
<7>[ 48.101007] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2B] hw state readout: disabled, pipe B
<7>[ 48.101143] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:plane 3B] hw state readout: disabled, pipe B
<7>[ 48.101276] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:111:plane 4B] hw state readout: disabled, pipe B
<7>[ 48.101412] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:120:plane 5B] hw state readout: disabled, pipe B
<7>[ 48.101547] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:129:cursor B] hw state readout: disabled, pipe B
<7>[ 48.101682] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:136:plane 1C] hw state readout: disabled, pipe C
<7>[ 48.101840] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:145:plane 2C] hw state readout: disabled, pipe C
<7>[ 48.101976] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:154:plane 3C] hw state readout: disabled, pipe C
<7>[ 48.102119] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:163:plane 4C] hw state readout: disabled, pipe C
<7>[ 48.102252] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:172:plane 5C] hw state readout: disabled, pipe C
<7>[ 48.102385] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:181:cursor C] hw state readout: disabled, pipe C
<7>[ 48.102517] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:188:plane 1D] hw state readout: disabled, pipe D
<7>[ 48.102649] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:197:plane 2D] hw state readout: disabled, pipe D
<7>[ 48.102796] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:206:plane 3D] hw state readout: disabled, pipe D
<7>[ 48.102953] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:215:plane 4D] hw state readout: disabled, pipe D
<7>[ 48.103155] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:224:plane 5D] hw state readout: disabled, pipe D
<7>[ 48.103360] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:233:cursor D] hw state readout: disabled, pipe D
<7>[ 48.104204] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
<7>[ 48.104388] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:240:DDI A/PHY A] hw state readout: enabled, pipe A
<7>[ 48.104525] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:249:DDI B/PHY B] hw state readout: disabled, pipe A
<7>[ 48.104651] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:251:DP-MST A] hw state readout: disabled, pipe A
<7>[ 48.104787] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:252:DP-MST B] hw state readout: disabled, pipe B
<7>[ 48.104929] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:253:DP-MST C] hw state readout: disabled, pipe C
<7>[ 48.105078] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:254:DP-MST D] hw state readout: disabled, pipe D
<7>[ 48.105272] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected)
<7>[ 48.105405] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:267:DDI TC1/PHY TC1] hw state readout: disabled, pipe A
<7>[ 48.105527] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:269:DP-MST A] hw state readout: disabled, pipe A
<7>[ 48.105652] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:270:DP-MST B] hw state readout: disabled, pipe B
<7>[ 48.105790] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:271:DP-MST C] hw state readout: disabled, pipe C
<7>[ 48.105935] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:272:DP-MST D] hw state readout: disabled, pipe D
<7>[ 48.106134] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected)
<7>[ 48.106295] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:276:DDI TC2/PHY TC2] hw state readout: disabled, pipe A
<7>[ 48.106437] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port F/TC#3: sanitize mode (disconnected)
<7>[ 48.106564] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:280:DDI TC3/PHY TC3] hw state readout: disabled, pipe A
<7>[ 48.106686] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:282:DP-MST A] hw state readout: disabled, pipe A
<7>[ 48.106825] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:283:DP-MST B] hw state readout: disabled, pipe B
<7>[ 48.106974] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:284:DP-MST C] hw state readout: disabled, pipe C
<7>[ 48.107120] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:285:DP-MST D] hw state readout: disabled, pipe D
<7>[ 48.107262] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port G/TC#4: sanitize mode (disconnected)
<7>[ 48.107392] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:289:DDI TC4/PHY TC4] hw state readout: disabled, pipe A
<7>[ 48.107514] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:291:DP-MST A] hw state readout: disabled, pipe A
<7>[ 48.107635] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:292:DP-MST B] hw state readout: disabled, pipe B
<7>[ 48.107764] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:293:DP-MST C] hw state readout: disabled, pipe C
<7>[ 48.107886] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:294:DP-MST D] hw state readout: disabled, pipe D
<7>[ 48.108106] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:241:eDP-1] hw state readout: enabled
<7>[ 48.108246] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:250:DP-1] hw state readout: disabled
<7>[ 48.108384] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:262:HDMI-A-1] hw state readout: disabled
<7>[ 48.108521] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:268:DP-2] hw state readout: disabled
<7>[ 48.108657] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:277:HDMI-A-2] hw state readout: disabled
<7>[ 48.108810] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:281:DP-3] hw state readout: disabled
<7>[ 48.108949] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:290:DP-4] hw state readout: disabled
<7>[ 48.109153] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:32:plane 1A] min_cdclk 256910 kHz
<7>[ 48.109283] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:41:plane 2A] min_cdclk 0 kHz
<7>[ 48.109409] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:50:plane 3A] min_cdclk 0 kHz
<7>[ 48.109532] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 4A] min_cdclk 0 kHz
<7>[ 48.109654] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 5A] min_cdclk 0 kHz
<7>[ 48.109805] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor A] min_cdclk 0 kHz
<7>[ 48.109942] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1B] min_cdclk 0 kHz
<7>[ 48.110080] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2B] min_cdclk 0 kHz
<7>[ 48.110217] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:plane 3B] min_cdclk 0 kHz
<7>[ 48.110355] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:111:plane 4B] min_cdclk 0 kHz
<7>[ 48.110476] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:120:plane 5B] min_cdclk 0 kHz
<7>[ 48.110596] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:129:cursor B] min_cdclk 0 kHz
<7>[ 48.110723] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:136:plane 1C] min_cdclk 0 kHz
<7>[ 48.110849] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:145:plane 2C] min_cdclk 0 kHz
<7>[ 48.110991] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:154:plane 3C] min_cdclk 0 kHz
<7>[ 48.111131] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:163:plane 4C] min_cdclk 0 kHz
<7>[ 48.111265] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:172:plane 5C] min_cdclk 0 kHz
<7>[ 48.111391] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:181:cursor C] min_cdclk 0 kHz
<7>[ 48.111512] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:188:plane 1D] min_cdclk 0 kHz
<7>[ 48.111632] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:197:plane 2D] min_cdclk 0 kHz
<7>[ 48.111760] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:206:plane 3D] min_cdclk 0 kHz
<7>[ 48.111888] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:215:plane 4D] min_cdclk 0 kHz
<7>[ 48.112036] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:224:plane 5D] min_cdclk 0 kHz
<7>[ 48.112177] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:233:cursor D] min_cdclk 0 kHz
<7>[ 48.112500] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:82:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no
<7>[ 48.112635] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:134:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 48.112778] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:186:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 48.112913] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:238:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 48.113060] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe A data rate 2055280 num active planes 1
<7>[ 48.113228] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe B data rate 0 num active planes 0
<7>[ 48.113382] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe C data rate 0 num active planes 0
<7>[ 48.113517] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe D data rate 0 num active planes 0
<7>[ 48.113735] i915 0000:00:02.0: [drm:intel_cmtg_sanitize [i915]] CMTG readout: CMTG A: enabled, CMTG B: n/a, Transcoder A secondary: yes, Transcoder B secondary: no
<7>[ 48.114028] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe A] enable: yes [setup_hw_state]
<7>[ 48.114188] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 48.114337] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
<7>[ 48.114473] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>
<7>[ 48.114604] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 48.114745] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0
<7>[ 48.114884] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0
<7>[ 48.115030] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 623587, link_n: 524288, tu: 64
<7>[ 48.115174] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 48.115304] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled
<7>[ 48.115434] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled
<7>[ 48.115563] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7>[ 48.115696] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0
<7>[ 48.115829] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7>[ 48.115958] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1
<7>[ 48.116086] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0
<7>[ 48.116214] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0
<7>[ 48.116341] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0
<7>[ 48.116470] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa
<7>[ 48.116600] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa
<7>[ 48.116738] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa
<7>[ 48.116872] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa
<7>[ 48.117000] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa
<7>[ 48.117128] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 513820
<7>[ 48.117255] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0
<7>[ 48.117384] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 48.117511] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 48.117638] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0
<7>[ 48.117812] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7>[ 48.117954] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0
<7>[ 48.118097] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 48.118239] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 48.118369] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 48.118497] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 48.118623] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 48.118765] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 48.118901] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 48.119040] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 48.119178] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 48.119308] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 48.119436] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 48.119562] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:134:pipe B] enable: no [setup_hw_state]
<7>[ 48.119704] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:186:pipe C] enable: no [setup_hw_state]
<7>[ 48.119832] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:238:pipe D] enable: no [setup_hw_state]
<7>[ 48.120325] i915 0000:00:02.0: [drm:skl_get_initial_plane_config [i915]] [CRTC:82:pipe A][PLANE:32:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800
<7>[ 48.120469] i915 0000:00:02.0: [drm:initial_plane_vma [i915]] Using dma_addr=0x0000000000800000, based on initial plane programming
<7>[ 48.120619] i915 0000:00:02.0: [drm:_i915_gem_object_stolen_init [i915]] creating preallocated stolen object: stolen_offset=0x0000000000000000, size=0x00000000013c7000
<7>[ 48.121145] i915 0000:00:02.0: [drm:initial_plane_vma [i915]] Initial plane fb bound to 0x0 in the ggtt (original 0xfec00000)
<7>[ 48.132860] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [2048K, 832K)
<7>[ 48.139536] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [1040K, 832K)
<7>[ 48.139672] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [13c7000, fee00000]
<7>[ 48.139807] i915 0000:00:02.0: [drm:nop_init_clock_gating [i915]] No clock gating settings or workarounds applied.
<7>[ 48.139917] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: L3BANK steering: group=0x0, instance=0x0
<7>[ 48.140040] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: DSS steering: group=0x0, instance=0x0
<7>[ 48.140157] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: INSTANCE 0 steering: group=0x0, instance=0x0
<7>[ 48.140278] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global
<7>[ 48.142619] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 7 engine workarounds on rcs'0
<7>[ 48.142896] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 whitelist workarounds on rcs'0
<7>[ 48.143024] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 7 context workarounds on rcs'0
<7>[ 48.143772] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 engine workarounds on bcs'0
<7>[ 48.143901] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 context workarounds on bcs'0
<7>[ 48.144277] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 engine workarounds on ccs'0
<7>[ 48.144404] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 context workarounds on ccs'0
<7>[ 48.146939] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)
<7>[ 48.147103] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 24 ext-regs.
<7>[ 48.147258] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset
<7>[ 48.167512] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0x13c804f
<7>[ 48.167664] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x410000
<7>[ 48.167840] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4
<7>[ 48.167966] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3
<7>[ 48.168093] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x2f92
<7>[ 48.168217] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x7d550008
<7>[ 48.168339] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0
<7>[ 48.168461] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0
<7>[ 48.168583] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0
<7>[ 48.168716] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0
<7>[ 48.168838] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0
<7>[ 48.168958] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0
<7>[ 48.169076] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0
<7>[ 48.169196] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0
<6>[ 48.170050] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/mtl_guc_70.bin version 70.36.0
<7>[ 48.179758] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 8ms, freq = 1750MHz -> 2050MHz vs 2200MHz, status = 0x8002F034, count = 0, ret = 0
<7>[ 48.180620] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<6>[ 48.181969] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled
<6>[ 48.181972] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled
<6>[ 48.182403] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled
<7>[ 48.182708] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT0: GUC: Querying HW config table: size = 0, offset = 0x00000000
<7>[ 48.183674] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT0: GUC: Querying HW config table: size = 752, offset = 0x01FFC000
<7>[ 48.191218] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: OADDRM steering: group=0x0, instance=0x0
<7>[ 48.191354] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 5 GT workarounds on global
<7>[ 48.192291] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'0
<7>[ 48.192420] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'0
<7>[ 48.193185] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'2
<7>[ 48.193305] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'2
<7>[ 48.193849] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vecs'0
<7>[ 48.193971] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vecs'0
<7>[ 48.194491] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on other'6
<7>[ 48.194605] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on other'6
<7>[ 48.198194] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT1: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)
<7>[ 48.198360] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT1: GUC: capture found 24 ext-regs.
<7>[ 48.198519] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT1: GUC: Used 4 KB for temporary ADS regset
<7>[ 48.219217] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 0] = 0x1ffd04f
<7>[ 48.219364] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 1] = 0x400000
<7>[ 48.219497] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 2] = 0x4
<7>[ 48.219627] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 3] = 0x3
<7>[ 48.219793] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 4] = 0x47fc
<7>[ 48.219923] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 5] = 0x7d550008
<7>[ 48.220048] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 6] = 0x0
<7>[ 48.220172] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 7] = 0x0
<7>[ 48.220297] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 8] = 0x0
<7>[ 48.220420] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 9] = 0x0
<7>[ 48.220542] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[10] = 0x0
<7>[ 48.220663] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[11] = 0x0
<7>[ 48.220806] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[12] = 0x0
<7>[ 48.220929] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[13] = 0x0
<7>[ 48.221050] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT1: HuC: loaded by GSC = no
<7>[ 48.226370] i915 0000:00:02.0: [drm:i915_gsc_proxy_component_bind [i915]] GT1: GSC proxy mei component bound
<6>[ 48.226518] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops i915_gsc_proxy_component_ops [i915])
<6>[ 48.227039] i915 0000:00:02.0: [drm] GT1: GuC firmware i915/mtl_guc_70.bin version 70.36.0
<6>[ 48.227042] i915 0000:00:02.0: [drm] GT1: HuC firmware i915/mtl_huc_gsc.bin version 8.5.4
<7>[ 48.240762] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT1: GUC: init took 12ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x8002F034, count = 0, ret = 0
<7>[ 48.241005] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled
<7>[ 48.249787] i915 0000:00:02.0: [drm:intel_huc_wait_for_auth_complete [i915]] GT1: HuC: auth took 8ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x0000C1DC, count = 0, ret = 0
<6>[ 48.249927] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for clear media
<6>[ 48.250824] i915 0000:00:02.0: [drm] GT1: GUC: submission enabled
<6>[ 48.250827] i915 0000:00:02.0: [drm] GT1: GUC: SLPC enabled
<6>[ 48.251031] i915 0000:00:02.0: [drm] GT1: GUC: RC enabled
<7>[ 48.251226] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT1: GUC: Querying HW config table: size = 0, offset = 0x00000000
<7>[ 48.252019] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT1: GUC: Querying HW config table: size = 752, offset = 0xFEDCF000
<7>[ 48.258766] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0
<7>[ 48.259035] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0
<7>[ 48.259221] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0
<7>[ 48.259399] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'2 to vcs1
<7>[ 48.259572] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0
<7>[ 48.259763] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed ccs'0 to ccs0
<7>[ 48.259940] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed other'6 to other0
<6>[ 48.261597] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized
<7>[ 48.263041] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[ 48.263195] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[ 48.263397] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[ 48.263532] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[ 48.263698] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] ddb ( 0 - 2048) -> ( 0 - 4001), size 2048 -> 4001
<7>[ 48.263838] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:77:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95
<7>[ 48.263971] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7>[ 48.264103] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] lines 2, 2, 2, 2, 2, 2, 0, 0, 1, 3, 1 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7>[ 48.264236] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] blocks 49, 49, 49, 49, 49, 49, 0, 0, 7, 73, 7 -> 49, 385, 385, 457, 457, 673, 0, 0, 0, 73, 0
<7>[ 48.264371] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 0, 82, 0
<7>[ 48.264506] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7>[ 48.264659] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7>[ 48.264819] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7>[ 48.264960] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7>[ 48.265099] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7>[ 48.265237] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (40143 kHz) > old min cdclk (0 kHz)
<7>[ 48.266980] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0xffff0072 0x1341b072)
<7>[ 48.267330] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:240:DDI A/PHY A]
<7>[ 48.267475] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DDI B/PHY B]
<7>[ 48.267613] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:251:DP-MST A]
<7>[ 48.267771] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:252:DP-MST B]
<7>[ 48.267910] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:253:DP-MST C]
<7>[ 48.268044] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:254:DP-MST D]
<7>[ 48.268175] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DDI TC1/PHY TC1]
<7>[ 48.268306] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:269:DP-MST A]
<7>[ 48.268434] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:270:DP-MST B]
<7>[ 48.268564] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DP-MST C]
<7>[ 48.268706] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:272:DP-MST D]
<7>[ 48.268843] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:276:DDI TC2/PHY TC2]
<7>[ 48.268974] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DDI TC3/PHY TC3]
<7>[ 48.269103] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:282:DP-MST A]
<7>[ 48.269231] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:283:DP-MST B]
<7>[ 48.269358] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DP-MST C]
<7>[ 48.269487] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:285:DP-MST D]
<7>[ 48.269616] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DDI TC4/PHY TC4]
<7>[ 48.269755] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:291:DP-MST A]
<7>[ 48.269885] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:292:DP-MST B]
<7>[ 48.270014] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:293:DP-MST C]
<7>[ 48.270141] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:294:DP-MST D]
<7>[ 48.270421] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 42393600 bytes of contiguous stolen space for FBC, limit: 1
<7>[ 48.270603] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:32:plane 1A]
<7>[ 48.270850] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: no -> yes (pipe: A)
<7>[ 48.271005] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 4 (mbus joined: yes)
<7>[ 48.275303] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0x2000071 0x1341b072)
<7>[ 48.278981] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:241:eDP-1] adding connector to sysfs
<7>[ 48.281236] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:241:eDP-1] backlight device intel_backlight registered
<7>[ 48.281566] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
<7>[ 48.283198] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:241:eDP-1] generating connector hotplug event
<7>[ 48.283271] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:250:DP-1] adding connector to sysfs
<7>[ 48.283747] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1
<7>[ 48.284819] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:250:DP-1] generating connector hotplug event
<7>[ 48.284858] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:262:HDMI-A-1] adding connector to sysfs
<7>[ 48.285324] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:262:HDMI-A-1] generating connector hotplug event
<7>[ 48.285355] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:268:DP-2] adding connector to sysfs
<7>[ 48.285678] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2
<7>[ 48.286544] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:268:DP-2] generating connector hotplug event
<7>[ 48.286576] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:277:HDMI-A-2] adding connector to sysfs
<7>[ 48.286821] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:277:HDMI-A-2] generating connector hotplug event
<7>[ 48.286851] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:281:DP-3] adding connector to sysfs
<7>[ 48.287171] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3
<7>[ 48.288449] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:281:DP-3] generating connector hotplug event
<7>[ 48.288478] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:290:DP-4] adding connector to sysfs
<7>[ 48.288813] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY TC4 bus for card0-DP-4
<7>[ 48.289620] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:290:DP-4] generating connector hotplug event
<6>[ 48.289644] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0
<7>[ 48.291497] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected
<6>[ 48.301591] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6>[ 48.304007] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
<7>[ 48.304930] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7>[ 48.305088] i915 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [i915]] aud_ts_cdclk set to M=60, N=768
<7>[ 48.305684] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix
<7>[ 48.306188] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] found possible fb from [PLANE:32:plane 1A]
<7>[ 48.306333] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:134:pipe B] not active, skipping
<7>[ 48.306471] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:186:pipe C] not active, skipping
<7>[ 48.306603] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:238:pipe D] not active, skipping
<7>[ 48.306742] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] checking [PLANE:32:plane 1A] for BIOS fb
<6>[ 48.306830] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])
<7>[ 48.306869] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:82:pipe A] area: 2880x1800, bpp: 32, size: 20736000
<7>[ 48.306994] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] fb big enough [PLANE:32:plane 1A] (20738048 >= 20736000)
<7>[ 48.307119] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:134:pipe B] not active, skipping
<7>[ 48.307245] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:186:pipe C] not active, skipping
<7>[ 48.307312] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010
<7>[ 48.307379] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:238:pipe D] not active, skipping
<7>[ 48.307501] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] using BIOS fb for initial console
<7>[ 48.307980] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:250:DP-1]
<7>[ 48.308336] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7>[ 48.311298] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 48.312149] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9a01
<7>[ 48.312631] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL
<7>[ 48.312642] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled
<7>[ 48.312782] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:250:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 48.312971] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:262:HDMI-A-1]
<7>[ 48.317746] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:262:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 48.317896] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:268:DP-2]
<7>[ 48.318292] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 48.318513] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:268:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 48.318652] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:277:HDMI-A-2]
<7>[ 48.318962] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy)
<7>[ 48.323770] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:277:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 48.323914] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:281:DP-3]
<7>[ 48.324137] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 48.324326] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:281:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 48.324463] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:290:DP-4]
<7>[ 48.324704] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt)
<7>[ 48.324905] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:290:DP-4] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 48.325165] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[ 48.325236] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:241:eDP-1]
<7>[ 48.325257] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:241:eDP-1]
<7>[ 48.326522] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 48.327281] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 48.327437] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7>[ 48.327596] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7>[ 48.327827] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7>[ 48.327832] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] ELD monitor
<7>[ 48.327836] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] ELD size 20, SAD count 0
<7>[ 48.327856] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] VRR capable: no
<7>[ 48.327985] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 48.328884] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 48.329030] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 48.330542] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:241:eDP-1] status updated from unknown to connected
<7>[ 48.330803] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[ 48.331089] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:241:eDP-1] probed modes:
<7>[ 48.331103] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7>[ 48.331111] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:250:DP-1]
<7>[ 48.331120] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:250:DP-1]
<7>[ 48.335745] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:250:DP-1] disconnected
<7>[ 48.335763] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:262:HDMI-A-1]
<7>[ 48.335771] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:262:HDMI-A-1]
<7>[ 48.340719] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:262:HDMI-A-1] disconnected
<7>[ 48.340737] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:268:DP-2]
<7>[ 48.340746] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:268:DP-2]
<7>[ 48.341084] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:268:DP-2] disconnected
<7>[ 48.341099] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:277:HDMI-A-2]
<7>[ 48.341107] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:277:HDMI-A-2]
<7>[ 48.345732] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:277:HDMI-A-2] disconnected
<7>[ 48.345755] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:281:DP-3]
<7>[ 48.345768] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:281:DP-3]
<7>[ 48.346091] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:281:DP-3] disconnected
<7>[ 48.346109] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:290:DP-4]
<7>[ 48.346119] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:290:DP-4]
<7>[ 48.346375] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:290:DP-4] disconnected
<7>[ 48.346385] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:241:eDP-1] enabled? yes
<7>[ 48.346389] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:250:DP-1] enabled? no
<7>[ 48.346391] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:HDMI-A-1] enabled? no
<7>[ 48.346392] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:268:DP-2] enabled? no
<7>[ 48.346394] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:277:HDMI-A-2] enabled? no
<7>[ 48.346395] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:281:DP-3] enabled? no
<7>[ 48.346397] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:290:DP-4] enabled? no
<7>[ 48.346522] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 48.346544] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:241:eDP-1] found preferred mode: 2880x1800
<7>[ 48.346546] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7>[ 48.346556] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 48.346629] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<7>[ 48.346646] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] re-using BIOS fb
<7>[ 48.346911] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 2880x1800 fb: 0x00000000
<6>[ 48.347893] fbcon: i915drmfb (fb0) is primary device
<7>[ 48.348782] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:241:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7>[ 48.348965] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:240:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 max link_bpp 30.0000
<7>[ 48.349124] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 link rate required 1926825 available 2160000
<7>[ 48.349278] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7>[ 48.349425] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:240:DDI A/PHY A] [CRTC:82:pipe A]
<7>[ 48.349566] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 623587/524288, found tu 64, data 7483046/8388608 link 498869/524288)
<7>[ 48.349726] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10
<7>[ 48.349867] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:
<7>[ 48.350005] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] c10pll_hw_state: fracen: no,
<7>[ 48.350141] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] multiplier: 225, tx_clk_div: 1.
<7>[ 48.350273] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] c10pll_rawhw_state:
<7>[ 48.350400] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21
<7>[ 48.350416] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A
<7>[ 48.350528] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7>[ 48.350571] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A
<7>[ 48.350654] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 48.350727] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A
<7>[ 48.350793] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 48.350867] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A
<7>[ 48.350925] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 48.351011] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B
<7>[ 48.351062] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7>[ 48.351150] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B
<7>[ 48.351191] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:
<7>[ 48.351292] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B
<7>[ 48.351341] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] c10pll_hw_state: fracen: yes,
<7>[ 48.351422] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B
<7>[ 48.351470] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] quot: 40960, rem: 0, den: 1,
<7>[ 48.351552] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C
<7>[ 48.351597] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] multiplier: 140, tx_clk_div: 0.
<7>[ 48.351681] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C
<7>[ 48.351731] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] c10pll_rawhw_state:
<7>[ 48.351832] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C
<7>[ 48.351857] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21
<7>[ 48.351960] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C
<7>[ 48.351981] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7>[ 48.352089] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D
<7>[ 48.352104] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 48.352223] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D
<7>[ 48.352229] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 48.352349] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D
<7>[ 48.352353] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7>[ 48.352475] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D
<7>[ 48.352476] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7>[ 48.352600] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E
<7>[ 48.352599] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30)
<7>[ 48.352740] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E
<7>[ 48.352763] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in port_clock (expected 432000, found 540000)
<7>[ 48.352868] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E
<7>[ 48.352902] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7>[ 48.352994] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E
<7>[ 48.353083] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7>[ 48.353118] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F
<7>[ 48.353223] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7>[ 48.353250] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F
<7>[ 48.353358] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 0, 73, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7>[ 48.353376] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F
<7>[ 48.353488] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 0, 82, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7>[ 48.353501] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F
<7>[ 48.353616] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:41:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 48.353626] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G
<7>[ 48.353760] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:41:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 48.353788] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G
<7>[ 48.353886] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:41:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 48.353918] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G
<7>[ 48.354012] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:41:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 48.354043] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G
<7>[ 48.354138] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:50:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 48.354166] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H
<7>[ 48.354261] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:50:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 48.354291] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H
<7>[ 48.354384] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:50:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 48.354417] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H
<7>[ 48.354508] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:50:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 48.354544] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H
<7>[ 48.354633] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:59:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 48.354672] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I
<7>[ 48.354770] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:59:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 48.354813] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I
<7>[ 48.354896] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:59:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 48.354940] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I
<7>[ 48.355023] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:59:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 48.355066] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I
<7>[ 48.355148] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 48.355271] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 48.355397] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 48.355532] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 48.355669] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:77:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 48.355823] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:77:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 48.355963] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:77:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 48.356097] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:77:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 48.356268] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe A] enable: yes [modeset]
<7>[ 48.356418] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 48.356559] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7>[ 48.356708] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>
<7>[ 48.356850] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 48.356987] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0
<7>[ 48.357124] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0
<7>[ 48.357261] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64
<7>[ 48.357402] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 48.357534] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled
<7>[ 48.357665] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled
<7>[ 48.357819] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7>[ 48.357962] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0
<7>[ 48.358104] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7>[ 48.358237] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 4, length 14
<7>[ 48.358370] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB
<7>[ 48.358511] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB
<7>[ 48.358642] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0
<7>[ 48.358784] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range
<6>[ 48.358875] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
<7>[ 48.358921] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined
<7>[ 48.359054] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1
<7>[ 48.359183] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0
<7>[ 48.359317] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0
<6>[ 48.359481] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
<7>[ 48.359447] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0
<7>[ 48.359580] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7>[ 48.359720] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<6>[ 48.359806] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
<7>[ 48.359856] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa
<7>[ 48.359987] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa
<6>[ 48.360152] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
<7>[ 48.360117] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa
<7>[ 48.360249] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820
<7>[ 48.360379] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0
<7>[ 48.360510] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 48.360640] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 48.360781] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0
<7>[ 48.360910] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000
<7>[ 48.361052] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7>[ 48.361195] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 48.361337] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 48.361478] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 48.361609] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 48.361796] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 48.361958] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 48.362169] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 48.362373] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 48.362545] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 48.362679] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 48.362849] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 48.362986] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:32:plane 1A] fb: [FB:299] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7>[ 48.363131] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7>[ 48.363276] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7>[ 48.363428] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:41:plane 2A] fb: [NOFB], visible: no
<7>[ 48.363609] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:50:plane 3A] fb: [NOFB], visible: no
<7>[ 48.363785] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:59:plane 4A] fb: [NOFB], visible: no
<7>[ 48.363925] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:68:plane 5A] fb: [NOFB], visible: no
<7>[ 48.364071] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:77:cursor A] fb: [NOFB], visible: no
<7>[ 48.375619] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]
<6>[ 48.406206] i915 0000:00:02.0: [drm] GT1: Loaded GSC firmware i915/mtl_gsc_1.bin (cv1.0, r102.1.15.1926, svn 1)
<7>[ 48.426609] i915 0000:00:02.0: [drm:intel_huc_wait_for_auth_complete [i915]] GT1: HuC: auth took 0ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x00116C68, count = 0, ret = 0
<6>[ 48.426845] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for all workloads
<7>[ 48.579094] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:241:eDP-1] set backlight PWM = 0
<7>[ 48.580201] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A
<7>[ 48.588969] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000
<7>[ 48.589098] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 turn panel power off
<7>[ 48.589541] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:240:DDI A/PHY A] - short
<7>[ 48.589639] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 wait for panel power off time
<7>[ 48.590195] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7>[ 48.642098] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7>[ 48.642146] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7>[ 48.642698] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:240:DDI A/PHY A] - long
<7>[ 48.643014] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:240:DDI A/PHY A]
<7>[ 48.643080] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A
<7>[ 48.643215] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10
<7>[ 48.643782] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:240:DDI A/PHY A]
<7>[ 48.644380] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:32:plane 1A]
<7>[ 48.644956] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0x2000071 0x13421c72)
<7>[ 48.645395] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:240:DDI A/PHY A]
<7>[ 48.645673] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DDI B/PHY B]
<7>[ 48.645881] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:251:DP-MST A]
<7>[ 48.646072] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:252:DP-MST B]
<7>[ 48.646258] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:253:DP-MST C]
<7>[ 48.646441] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:254:DP-MST D]
<7>[ 48.646668] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DDI TC1/PHY TC1]
<7>[ 48.646865] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:269:DP-MST A]
<7>[ 48.647047] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:270:DP-MST B]
<7>[ 48.647172] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DP-MST C]
<7>[ 48.647297] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:272:DP-MST D]
<7>[ 48.647421] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:276:DDI TC2/PHY TC2]
<7>[ 48.647546] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DDI TC3/PHY TC3]
<7>[ 48.647672] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:282:DP-MST A]
<7>[ 48.647831] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:283:DP-MST B]
<7>[ 48.647981] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DP-MST C]
<7>[ 48.648105] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:285:DP-MST D]
<7>[ 48.648231] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DDI TC4/PHY TC4]
<7>[ 48.648356] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:291:DP-MST A]
<7>[ 48.648480] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:292:DP-MST B]
<7>[ 48.648602] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:293:DP-MST C]
<7>[ 48.648740] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:294:DP-MST D]
<7>[ 48.648885] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A
<7>[ 48.649849] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 turn panel power on
<7>[ 48.650019] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 wait for panel power cycle (493 ms remaining)
<7>[ 48.890232] i915 0000:00:02.0: [drm:gsc_work [i915]] GT1: GSC Proxy initialized
<7>[ 49.147115] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7>[ 49.230683] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7>[ 49.231509] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 wait for panel power on
<7>[ 49.232250] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7>[ 49.264092] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7>[ 49.264649] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:240:DDI A/PHY A] - long
<7>[ 49.265167] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20
<7>[ 49.265772] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:240:DDI A/PHY A]
<7>[ 49.355588] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected)
<7>[ 49.355618] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 49.355586] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 49.355892] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected)
<7>[ 49.433379] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7>[ 49.435963] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 49.436447] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7>[ 49.440901] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80
<7>[ 49.441778] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:241:eDP-1][ENCODER:240:DDI A/PHY A][DPRX] Reloading eDP link rates
<7>[ 49.442697] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:241:eDP-1][ENCODER:240:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07
<7>[ 49.443744] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:241:eDP-1][ENCODER:240:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7>[ 49.444446] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:241:eDP-1][ENCODER:240:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7>[ 49.445620] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:241:eDP-1][ENCODER:240:DDI A/PHY A][DPRX] Clock recovery OK
<7>[ 49.445758] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:241:eDP-1][ENCODER:240:DDI A/PHY A][DPRX] Using DP training pattern TPS3
<7>[ 49.447357] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:241:eDP-1][ENCODER:240:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7>[ 49.447482] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:241:eDP-1][ENCODER:240:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4
<7>[ 49.448095] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A
<7>[ 49.448348] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]
<7>[ 49.448485] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A
<7>[ 49.448679] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:241:eDP-1] set backlight PWM = 192000
<7>[ 49.459525] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7>[ 49.461340] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:241:eDP-1]
<7>[ 49.461557] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:82:pipe A]
<7>[ 49.462764] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp
<6>[ 49.464422] Console: switching to colour frame buffer device 180x56
<6>[ 49.472523] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
<7>[ 49.480818] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 14
<7>[ 49.480975] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: C0
<7>[ 49.481118] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no
<7>[ 49.481259] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: yes
<7>[ 49.481397] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: yes
<7>[ 49.481533] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes
<7>[ 49.481669] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes
<7>[ 49.481823] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: yes
<7>[ 49.481975] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes
<7>[ 49.482122] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no
<7>[ 49.482254] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes
<7>[ 49.482393] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no
<7>[ 49.482527] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes
<7>[ 49.482660] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no
<7>[ 49.482816] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes
<7>[ 49.482946] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: no
<7>[ 49.483078] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no
<7>[ 49.483210] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no
<7>[ 49.483343] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes
<7>[ 49.483476] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes
<7>[ 49.483617] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: yes
<7>[ 49.483765] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 38400 kHz
<7>[ 49.483964] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]]
<7>[ 49.483980] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 49.484237] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:241:eDP-1]
<7>[ 49.484251] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:241:eDP-1]
<7>[ 49.485505] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device
<7>[ 49.485752] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 49.485895] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D
<7>[ 49.486462] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C
<7>[ 49.487124] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B
<7>[ 49.487390] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7>[ 49.487734] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x7d55 rev=0x08 platform=METEORLAKE (subplatform=0x0) gen=12
<7>[ 49.487919] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 12.71
<7>[ 49.488032] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 13
<7>[ 49.488144] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: B0
<7>[ 49.488254] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: C0
<7>[ 49.488362] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 0
<7>[ 49.488471] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x41
<7>[ 49.488580] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x211000
<7>[ 49.488688] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: METEORLAKE
<7>[ 49.488902] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48
<7>[ 49.489008] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2
<7>[ 49.489113] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 46
<7>[ 49.489218] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no
<7>[ 49.489322] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no
<7>[ 49.489427] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no
<7>[ 49.489532] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes
<7>[ 49.489641] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no
<7>[ 49.489804] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no
<7>[ 49.489915] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes
<7>[ 49.489938] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 49.490027] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes
<7>[ 49.490110] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7>[ 49.490168] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no
<7>[ 49.490297] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7>[ 49.490332] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: yes
<7>[ 49.490438] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: yes
<7>[ 49.490541] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7>[ 49.490548] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] ELD monitor
<7>[ 49.490556] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] ELD size 20, SAD count 0
<7>[ 49.490537] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes
<7>[ 49.490581] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] VRR capable: no
<7>[ 49.490677] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no
<7>[ 49.490760] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 49.490801] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no
<7>[ 49.490903] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: yes
<7>[ 49.491004] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: yes
<7>[ 49.491105] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no
<7>[ 49.491204] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no
<7>[ 49.491301] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: no
<7>[ 49.491398] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes
<7>[ 49.491495] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: yes
<7>[ 49.491589] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no
<7>[ 49.491653] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 49.491684] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no
<7>[ 49.491809] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: yes
<7>[ 49.491811] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 49.491908] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: yes
<7>[ 49.492003] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: yes
<7>[ 49.492123] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no
<7>[ 49.492234] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: yes
<7>[ 49.492354] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes
<7>[ 49.492450] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no
<7>[ 49.492546] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes
<7>[ 49.492643] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes
<7>[ 49.492797] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: yes
<7>[ 49.492900] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: no
<7>[ 49.492996] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no
<7>[ 49.493092] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no
<7>[ 49.493192] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no
<7>[ 49.493287] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no
<7>[ 49.493382] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled
<7>[ 49.493478] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 400003
<7>[ 49.493570] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 8
<7>[ 49.493673] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:241:eDP-1] probed modes:
<7>[ 49.493687] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7>[ 49.493708] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:250:DP-1]
<7>[ 49.493666] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: geometry dss mask=00000000,000000ff
<7>[ 49.493717] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:250:DP-1]
<7>[ 49.493777] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: compute dss mask=00000000,000000ff
<7>[ 49.493875] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 128
<7>[ 49.493971] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 16
<7>[ 49.494062] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no
<7>[ 49.494177] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no
<7>[ 49.494268] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: no
<7>[ 49.494359] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 4041400
<7>[ 49.494450] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 8
<7>[ 49.494541] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: geometry dss mask=00000000,0000ff00
<7>[ 49.494631] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: compute dss mask=00000000,0000ff00
<7>[ 49.494737] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 128
<7>[ 49.494831] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 16
<7>[ 49.494923] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no
<7>[ 49.495012] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no
<7>[ 49.495102] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: no
<6>[ 49.495193] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled
<6>[ 49.495194] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled
<6>[ 49.495194] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled
<7>[ 49.498784] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:250:DP-1] disconnected
<7>[ 49.498799] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:262:HDMI-A-1]
<7>[ 49.498807] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:262:HDMI-A-1]
<7>[ 49.503775] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:262:HDMI-A-1] disconnected
<7>[ 49.503787] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:268:DP-2]
<7>[ 49.503794] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:268:DP-2]
<7>[ 49.504190] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 49.504403] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:268:DP-2] disconnected
<7>[ 49.504411] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:277:HDMI-A-2]
<7>[ 49.504419] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:277:HDMI-A-2]
<7>[ 49.504722] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy)
<7>[ 49.509907] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:277:HDMI-A-2] disconnected
<7>[ 49.509919] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:281:DP-3]
<7>[ 49.509928] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:281:DP-3]
<7>[ 49.510162] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 49.510368] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:281:DP-3] disconnected
<7>[ 49.510377] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:290:DP-4]
<7>[ 49.510385] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:290:DP-4]
<7>[ 49.510614] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt)
<7>[ 49.510878] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:290:DP-4] disconnected
<7>[ 49.510888] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:241:eDP-1] enabled? yes
<7>[ 49.510897] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:250:DP-1] enabled? no
<7>[ 49.510899] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:HDMI-A-1] enabled? no
<7>[ 49.510900] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:268:DP-2] enabled? no
<7>[ 49.510901] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:277:HDMI-A-2] enabled? no
<7>[ 49.510902] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:281:DP-3] enabled? no
<7>[ 49.510904] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:290:DP-4] enabled? no
<7>[ 49.511016] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 49.511034] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:241:eDP-1] found preferred mode: 2880x1800
<7>[ 49.511036] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7>[ 49.511074] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 49.515466] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7>[ 49.526280] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]]
<7>[ 49.526298] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 49.526561] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:241:eDP-1]
<7>[ 49.526575] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:241:eDP-1]
<7>[ 49.527660] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 49.528419] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 49.528568] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7>[ 49.528724] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7>[ 49.528938] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7>[ 49.528942] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] ELD monitor
<7>[ 49.528949] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] ELD size 20, SAD count 0
<7>[ 49.528971] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] VRR capable: no
<7>[ 49.529092] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 49.529989] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 49.530127] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 49.531782] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:241:eDP-1] probed modes:
<7>[ 49.531798] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7>[ 49.531808] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:250:DP-1]
<7>[ 49.531817] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:250:DP-1]
<7>[ 49.536750] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:250:DP-1] disconnected
<7>[ 49.536761] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:262:HDMI-A-1]
<7>[ 49.536769] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:262:HDMI-A-1]
<7>[ 49.541768] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:262:HDMI-A-1] disconnected
<7>[ 49.541778] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:268:DP-2]
<7>[ 49.541785] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:268:DP-2]
<7>[ 49.542155] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:268:DP-2] disconnected
<7>[ 49.542164] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:277:HDMI-A-2]
<7>[ 49.542173] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:277:HDMI-A-2]
<7>[ 49.546767] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:277:HDMI-A-2] disconnected
<7>[ 49.546779] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:281:DP-3]
<7>[ 49.546787] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:281:DP-3]
<7>[ 49.547187] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:281:DP-3] disconnected
<7>[ 49.547196] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:290:DP-4]
<7>[ 49.547203] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:290:DP-4]
<7>[ 49.547435] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:290:DP-4] disconnected
<7>[ 49.547443] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:241:eDP-1] enabled? yes
<7>[ 49.547446] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:250:DP-1] enabled? no
<7>[ 49.547447] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:HDMI-A-1] enabled? no
<7>[ 49.547448] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:268:DP-2] enabled? no
<7>[ 49.547449] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:277:HDMI-A-2] enabled? no
<7>[ 49.547450] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:281:DP-3] enabled? no
<7>[ 49.547451] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:290:DP-4] enabled? no
<7>[ 49.547531] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 49.547548] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:241:eDP-1] found preferred mode: 2880x1800
<7>[ 49.547550] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7>[ 49.547582] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 49.559841] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7>[ 49.562613] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7>[ 49.565660] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]
<7>[ 49.593396] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7>[ 49.593452] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7>[ 49.596657] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509
<7>[ 49.604220] i915 0000:00:02.0: [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=9600/192000
<7>[ 49.604363] i915 0000:00:02.0: [drm:intel_panel_actually_set_backlight [i915]] [CONNECTOR:241:eDP-1] set backlight level = 13892
<7>[ 49.626301] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7>[ 49.626389] [IGT] i915_module_load: finished subtest load, SUCCESS
<7>[ 49.626450] [IGT] i915_module_load: exiting, ret=0
<7>[ 50.572558] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected)
<7>[ 50.572630] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 50.573304] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 50.573341] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected)
<7>[ 52.045309] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 turning VDD off
<7>[ 52.045987] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
<7>[ 52.046299] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7>[ 52.047363] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7>[ 52.047818] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02