<5>[ 0.000000] Linux version 6.14.0-rc7-CI_DRM_16300-g74f632d1bd3b+ (kbuild@gfx-ci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Fri Mar 21 16:44:35 UTC 2025
<6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast ro
<6>[ 0.000000] KERNEL supported cpus:
<6>[ 0.000000] Intel GenuineIntel
<6>[ 0.000000] AMD AuthenticAMD
<6>[ 0.000000] Hygon HygonGenuine
<6>[ 0.000000] Centaur CentaurHauls
<6>[ 0.000000] zhaoxin Shanghai
<6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
<6>[ 0.000000] BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000060a3efff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000060a3f000-0x0000000063db6fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000063db7000-0x0000000063edbfff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x0000000063edc000-0x0000000063ffefff] ACPI data
<6>[ 0.000000] BIOS-e820: [mem 0x0000000063fff000-0x0000000063ffffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000064000000-0x00000000787fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000000ffffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable
<6>[ 0.000000] NX (Execute Disable) protection: active
<6>[ 0.000000] APIC: Static calls initialized
<6>[ 0.000000] efi: EFI v2.7 by Intel
<6>[ 0.000000] efi: ACPI=0x63ffe000 ACPI 2.0=0x63ffe014 TPMFinalLog=0x63e11000 SMBIOS=0x60b16000 MEMATTR=0x5bd87018 ESRT=0x5ae00c18 MOKvar=0x60c4b000 TPMEventLog=0x63f0f018
<6>[ 0.000000] efi: Remove mem287: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
<6>[ 0.000000] efi: Remove mem289: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved
<6>[ 0.000000] SMBIOS 3.6 present.
<6>[ 0.000000] DMI: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024
<6>[ 0.000000] DMI: Memory slots populated: 8/8
<6>[ 0.000000] tsc: Detected 3400.000 MHz processor
<6>[ 0.000000] tsc: Detected 3379.200 MHz TSC
<7>[ 0.000011] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[ 0.000012] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[ 0.000016] last_pfn = 0x880000 max_arch_pfn = 0x400000000
<6>[ 0.000020] MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs
<6>[ 0.000022] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
<6>[ 0.000601] x2apic: enabled by BIOS, switching to x2apic ops
<6>[ 0.000602] last_pfn = 0x64000 max_arch_pfn = 0x400000000
<6>[ 0.004795] esrt: Reserving ESRT space from 0x000000005ae00c18 to 0x000000005ae00d40.
<7>[ 0.004806] e820: update [mem 0x5ae00000-0x5ae00fff] usable ==> reserved
<6>[ 0.004835] Using GB pages for direct mapping
<6>[ 0.005712] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes
<6>[ 0.005715] printk: early log buf free: 258904(98%)
<6>[ 0.005716] Secure boot disabled
<6>[ 0.005719] ACPI: Early table checksum verification disabled
<6>[ 0.005724] ACPI: RSDP 0x0000000063FFE014 000024 (v02 INTEL )
<6>[ 0.005728] ACPI: XSDT 0x0000000063F15228 000184 (v01 INTEL MTL 00000002 01000013)
<6>[ 0.005733] ACPI: FACP 0x0000000063FDC000 000114 (v06 INTEL MTL 00000002 01000013)
<6>[ 0.005738] ACPI: DSDT 0x0000000063F55000 083F8A (v02 INTEL MTL 00000002 01000013)
<6>[ 0.005740] ACPI: FACS 0x0000000063DF7000 000040
<6>[ 0.005742] ACPI: SSDT 0x0000000063FFC000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930)
<6>[ 0.005744] ACPI: SSDT 0x0000000063FFB000 00070D (v02 PmRef Cpu0Ist 00003000 INTL 20210930)
<6>[ 0.005746] ACPI: SSDT 0x0000000063FFA000 0005E4 (v02 PmRef Cpu0Hwp 00003000 INTL 20210930)
<6>[ 0.005749] ACPI: SSDT 0x0000000063FF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930)
<6>[ 0.005750] ACPI: SSDT 0x0000000063FF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930)
<6>[ 0.005752] ACPI: SSDT 0x0000000063FF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930)
<6>[ 0.005755] ACPI: SSDT 0x0000000063FF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930)
<6>[ 0.005756] ACPI: SSDT 0x0000000063FF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930)
<6>[ 0.005759] ACPI: SSDT 0x0000000063FF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930)
<6>[ 0.005761] ACPI: SSDT 0x0000000063FED000 003BC8 (v02 CpuRef CpuSsdt 00003000 INTL 20210930)
<6>[ 0.005763] ACPI: DTPR 0x0000000063FEC000 000098 (v01 00000000 00000000)
<6>[ 0.005765] ACPI: SSDT 0x0000000063FEB000 000D03 (v02 INTEL PDatTabl 00001000 INTL 20210930)
<6>[ 0.005768] ACPI: SSDT 0x0000000063FE8000 002494 (v02 INTEL IgfxSsdt 00003000 INTL 20210930)
<6>[ 0.005770] ACPI: SSDT 0x0000000063FDE000 009AB7 (v02 INTEL TcssSsdt 00001000 INTL 20210930)
<6>[ 0.005771] ACPI: SSDT 0x0000000063FDD000 0000F9 (v02 INTEL IpuSsdt 00001000 INTL 20210930)
<6>[ 0.005774] ACPI: HPET 0x0000000063FDB000 000038 (v01 INTEL MTL 00000002 01000013)
<6>[ 0.005776] ACPI: APIC 0x0000000063FDA000 000358 (v05 INTEL MTL 00000002 01000013)
<6>[ 0.005778] ACPI: MCFG 0x0000000063FD9000 00003C (v01 INTEL MTL 00000002 01000013)
<6>[ 0.005780] ACPI: SSDT 0x0000000063F45000 00FCEF (v02 INTEL MtlP_Rvp 00001000 INTL 20210930)
<6>[ 0.005783] ACPI: SSDT 0x0000000063F43000 00147F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930)
<6>[ 0.005785] ACPI: SSDT 0x0000000063F3E000 00389C (v02 INTEL Ther_Rvp 00001000 INTL 20210930)
<6>[ 0.005787] ACPI: SSDT 0x0000000063F38000 00535A (v02 DptfTb DptfTabl 00001000 INTL 20210930)
<6>[ 0.005790] ACPI: SSDT 0x0000000063FFD000 00060E (v02 INTEL Tpm2Tabl 00001000 INTL 20210930)
<6>[ 0.005791] ACPI: TPM2 0x0000000063F37000 00004C (v04 INTEL MTL 00000002 01000013)
<6>[ 0.005794] ACPI: LPIT 0x0000000063F36000 0000CC (v01 INTEL MTL 00000002 01000013)
<6>[ 0.005796] ACPI: WSMT 0x0000000063F35000 000028 (v01 INTEL MTL 00000002 01000013)
<6>[ 0.005798] ACPI: SSDT 0x0000000063F34000 000CA6 (v02 INTEL PtidDevc 00001000 INTL 20210930)
<6>[ 0.005800] ACPI: SSDT 0x0000000063F2E000 00587D (v02 INTEL TbtTypeC 00000000 INTL 20210930)
<6>[ 0.005802] ACPI: DBGP 0x0000000063F2D000 000034 (v01 INTEL MTL 00000002 01000013)
<6>[ 0.005804] ACPI: DBG2 0x0000000063F2C000 000054 (v00 INTEL MTL 00000002 01000013)
<6>[ 0.005806] ACPI: NHLT 0x0000000063F2B000 00098B (v00 INTEL MTL 00000002 01000013)
<6>[ 0.005808] ACPI: SSDT 0x0000000063F29000 001191 (v02 INTEL UsbCTabl 00001000 INTL 20210930)
<6>[ 0.005810] ACPI: SSDT 0x0000000063F23000 005CAE (v02 INTEL EcSsdt 00000000 INTL 20210930)
<6>[ 0.005811] ACPI: ECDT 0x0000000063F22000 000069 (v01 MTL 00000002 01000013)
<6>[ 0.005813] ACPI: DMAR 0x0000000063F21000 0000A8 (v01 INTEL MTL 00000002 01000013)
<6>[ 0.005815] ACPI: FPDT 0x0000000063F20000 000044 (v01 INTEL MTL 00000002 01000013)
<6>[ 0.005817] ACPI: SSDT 0x0000000063F1E000 001015 (v02 INTEL xh_mtlp3 00000000 INTL 20210930)
<6>[ 0.005819] ACPI: SSDT 0x0000000063F1B000 00281A (v02 SocGpe SocGpe 00003000 INTL 20210930)
<6>[ 0.005821] ACPI: SSDT 0x0000000063F18000 0028D3 (v02 SocCmn SocCmn 00003000 INTL 20210930)
<6>[ 0.005823] ACPI: SSDT 0x0000000063F16000 0011A0 (v02 INTEL St00Ssdt 00001000 INTL 20210930)
<6>[ 0.005825] ACPI: ASF! 0x0000000063F42000 000074 (v32 INTEL MTL 00000002 01000013)
<6>[ 0.005827] ACPI: PHAT 0x0000000063F14000 000810 (v01 INTEL MTL 00000005 MSFT 0100000D)
<6>[ 0.005829] ACPI: BGRT 0x0000000063F13000 000038 (v01 INTEL MTL 00000002 01000013)
<6>[ 0.005831] ACPI: Reserving FACP table memory at [mem 0x63fdc000-0x63fdc113]
<6>[ 0.005833] ACPI: Reserving DSDT table memory at [mem 0x63f55000-0x63fd8f89]
<6>[ 0.005833] ACPI: Reserving FACS table memory at [mem 0x63df7000-0x63df703f]
<6>[ 0.005834] ACPI: Reserving SSDT table memory at [mem 0x63ffc000-0x63ffc38b]
<6>[ 0.005835] ACPI: Reserving SSDT table memory at [mem 0x63ffb000-0x63ffb70c]
<6>[ 0.005836] ACPI: Reserving SSDT table memory at [mem 0x63ffa000-0x63ffa5e3]
<6>[ 0.005836] ACPI: Reserving SSDT table memory at [mem 0x63ff9000-0x63ff91aa]
<6>[ 0.005837] ACPI: Reserving SSDT table memory at [mem 0x63ff8000-0x63ff8393]
<6>[ 0.005838] ACPI: Reserving SSDT table memory at [mem 0x63ff6000-0x63ff7bae]
<6>[ 0.005838] ACPI: Reserving SSDT table memory at [mem 0x63ff4000-0x63ff561f]
<6>[ 0.005839] ACPI: Reserving SSDT table memory at [mem 0x63ff2000-0x63ff3348]
<6>[ 0.005839] ACPI: Reserving SSDT table memory at [mem 0x63ff1000-0x63ff1fba]
<6>[ 0.005840] ACPI: Reserving SSDT table memory at [mem 0x63fed000-0x63ff0bc7]
<6>[ 0.005840] ACPI: Reserving DTPR table memory at [mem 0x63fec000-0x63fec097]
<6>[ 0.005841] ACPI: Reserving SSDT table memory at [mem 0x63feb000-0x63febd02]
<6>[ 0.005841] ACPI: Reserving SSDT table memory at [mem 0x63fe8000-0x63fea493]
<6>[ 0.005842] ACPI: Reserving SSDT table memory at [mem 0x63fde000-0x63fe7ab6]
<6>[ 0.005842] ACPI: Reserving SSDT table memory at [mem 0x63fdd000-0x63fdd0f8]
<6>[ 0.005843] ACPI: Reserving HPET table memory at [mem 0x63fdb000-0x63fdb037]
<6>[ 0.005843] ACPI: Reserving APIC table memory at [mem 0x63fda000-0x63fda357]
<6>[ 0.005844] ACPI: Reserving MCFG table memory at [mem 0x63fd9000-0x63fd903b]
<6>[ 0.005844] ACPI: Reserving SSDT table memory at [mem 0x63f45000-0x63f54cee]
<6>[ 0.005845] ACPI: Reserving SSDT table memory at [mem 0x63f43000-0x63f4447e]
<6>[ 0.005846] ACPI: Reserving SSDT table memory at [mem 0x63f3e000-0x63f4189b]
<6>[ 0.005846] ACPI: Reserving SSDT table memory at [mem 0x63f38000-0x63f3d359]
<6>[ 0.005847] ACPI: Reserving SSDT table memory at [mem 0x63ffd000-0x63ffd60d]
<6>[ 0.005848] ACPI: Reserving TPM2 table memory at [mem 0x63f37000-0x63f3704b]
<6>[ 0.005848] ACPI: Reserving LPIT table memory at [mem 0x63f36000-0x63f360cb]
<6>[ 0.005849] ACPI: Reserving WSMT table memory at [mem 0x63f35000-0x63f35027]
<6>[ 0.005850] ACPI: Reserving SSDT table memory at [mem 0x63f34000-0x63f34ca5]
<6>[ 0.005850] ACPI: Reserving SSDT table memory at [mem 0x63f2e000-0x63f3387c]
<6>[ 0.005850] ACPI: Reserving DBGP table memory at [mem 0x63f2d000-0x63f2d033]
<6>[ 0.005851] ACPI: Reserving DBG2 table memory at [mem 0x63f2c000-0x63f2c053]
<6>[ 0.005852] ACPI: Reserving NHLT table memory at [mem 0x63f2b000-0x63f2b98a]
<6>[ 0.005852] ACPI: Reserving SSDT table memory at [mem 0x63f29000-0x63f2a190]
<6>[ 0.005853] ACPI: Reserving SSDT table memory at [mem 0x63f23000-0x63f28cad]
<6>[ 0.005853] ACPI: Reserving ECDT table memory at [mem 0x63f22000-0x63f22068]
<6>[ 0.005854] ACPI: Reserving DMAR table memory at [mem 0x63f21000-0x63f210a7]
<6>[ 0.005854] ACPI: Reserving FPDT table memory at [mem 0x63f20000-0x63f20043]
<6>[ 0.005855] ACPI: Reserving SSDT table memory at [mem 0x63f1e000-0x63f1f014]
<6>[ 0.005856] ACPI: Reserving SSDT table memory at [mem 0x63f1b000-0x63f1d819]
<6>[ 0.005856] ACPI: Reserving SSDT table memory at [mem 0x63f18000-0x63f1a8d2]
<6>[ 0.005857] ACPI: Reserving SSDT table memory at [mem 0x63f16000-0x63f1719f]
<6>[ 0.005858] ACPI: Reserving ASF! table memory at [mem 0x63f42000-0x63f42073]
<6>[ 0.005859] ACPI: Reserving PHAT table memory at [mem 0x63f14000-0x63f1480f]
<6>[ 0.005859] ACPI: Reserving BGRT table memory at [mem 0x63f13000-0x63f13037]
<6>[ 0.005948] APIC: Switched APIC routing to: cluster x2apic
<6>[ 0.006161] No NUMA configuration found
<6>[ 0.006161] Faking a node at [mem 0x0000000000000000-0x000000087fffffff]
<6>[ 0.006169] NODE_DATA(0) allocated [mem 0x87fb52fc0-0x87fb7dfff]
<6>[ 0.006323] Zone ranges:
<6>[ 0.006324] DMA [mem 0x0000000000001000-0x0000000000ffffff]
<6>[ 0.006325] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
<6>[ 0.006326] Normal [mem 0x0000000100000000-0x000000087fffffff]
<6>[ 0.006327] Device empty
<6>[ 0.006328] Movable zone start for each node
<6>[ 0.006330] Early memory node ranges
<6>[ 0.006330] node 0: [mem 0x0000000000001000-0x000000000009efff]
<6>[ 0.006331] node 0: [mem 0x0000000000100000-0x0000000060a3efff]
<6>[ 0.006332] node 0: [mem 0x0000000063fff000-0x0000000063ffffff]
<6>[ 0.006333] node 0: [mem 0x0000000100000000-0x000000087fffffff]
<6>[ 0.006334] Initmem setup node 0 [mem 0x0000000000001000-0x000000087fffffff]
<6>[ 0.006341] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[ 0.006370] On node 0, zone DMA: 97 pages in unavailable ranges
<6>[ 0.009383] On node 0, zone DMA32: 13760 pages in unavailable ranges
<6>[ 0.052033] On node 0, zone Normal: 16384 pages in unavailable ranges
<6>[ 0.052507] ACPI: PM-Timer IO Port: 0x1808
<4>[ 0.052512] CPU topo: Boot CPU APIC ID not the first enumerated APIC ID: 20 != 10
<4>[ 0.052512] CPU topo: [Firmware Bug]: APIC enumeration order not specification compliant
<6>[ 0.052515] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
<6>[ 0.052561] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
<6>[ 0.052563] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[ 0.052564] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>[ 0.052567] ACPI: Using ACPI (MADT) for SMP configuration information
<6>[ 0.052568] ACPI: HPET id: 0x8086a201 base: 0xfed00000
<7>[ 0.052581] e820: update [mem 0x5bda0000-0x5bdbafff] usable ==> reserved
<6>[ 0.052589] TSC deadline timer available
<6>[ 0.052591] CPU topo: Max. logical packages: 1
<6>[ 0.052591] CPU topo: Max. logical dies: 1
<6>[ 0.052591] CPU topo: Max. dies per package: 1
<6>[ 0.052593] CPU topo: Max. threads per core: 2
<6>[ 0.052594] CPU topo: Num. cores per package: 16
<6>[ 0.052594] CPU topo: Num. threads per package: 22
<6>[ 0.052595] CPU topo: Allowing 22 present CPUs plus 0 hotplug CPUs
<6>[ 0.052610] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[ 0.052611] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
<6>[ 0.052612] PM: hibernation: Registered nosave memory: [mem 0x5ae00000-0x5ae00fff]
<6>[ 0.052613] PM: hibernation: Registered nosave memory: [mem 0x5bda0000-0x5bdbafff]
<6>[ 0.052614] PM: hibernation: Registered nosave memory: [mem 0x60a3f000-0x63db6fff]
<6>[ 0.052615] PM: hibernation: Registered nosave memory: [mem 0x63db7000-0x63edbfff]
<6>[ 0.052615] PM: hibernation: Registered nosave memory: [mem 0x63edc000-0x63ffefff]
<6>[ 0.052616] PM: hibernation: Registered nosave memory: [mem 0x64000000-0x787fffff]
<6>[ 0.052616] PM: hibernation: Registered nosave memory: [mem 0x78800000-0xfed1ffff]
<6>[ 0.052617] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
<6>[ 0.052617] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
<6>[ 0.052619] [mem 0x78800000-0xfed1ffff] available for PCI devices
<6>[ 0.052620] Booting paravirtualized kernel on bare hardware
<6>[ 0.052622] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
<6>[ 0.052634] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:22 nr_cpu_ids:22 nr_node_ids:1
<6>[ 0.054131] percpu: Embedded 91 pages/cpu s249856 r8192 d114688 u524288
<7>[ 0.054136] pcpu-alloc: s249856 r8192 d114688 u524288 alloc=1*2097152
<7>[ 0.054137] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07
<7>[ 0.054140] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15
<7>[ 0.054142] pcpu-alloc: [0] 16 17 18 19 [0] 20 21 -- --
<5>[ 0.054157] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast ro
<5>[ 0.054243] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space.
<5>[ 0.054259] random: crng init done
<6>[ 0.057066] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
<6>[ 0.058471] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
<6>[ 0.058605] Fallback order for Node 0: 0
<6>[ 0.058609] Built 1 zonelists, mobility grouping on. Total pages: 8260062
<6>[ 0.058610] Policy zone: Normal
<6>[ 0.058623] mem auto-init: stack:off, heap alloc:on, heap free:off
<6>[ 0.058624] stackdepot: allocating hash table via alloc_large_system_hash
<6>[ 0.058627] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear)
<6>[ 0.060056] software IO TLB: area num 32.
<4>[ 0.118336] **********************************************************
<4>[ 0.118337] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.118337] ** **
<4>[ 0.118337] ** This system shows unhashed kernel memory addresses **
<4>[ 0.118337] ** via the console, logs, and other interfaces. This **
<4>[ 0.118338] ** might reduce the security of your system. **
<4>[ 0.118338] ** **
<4>[ 0.118338] ** If you see this message and you are not debugging **
<4>[ 0.118338] ** the kernel, report this immediately to your system **
<4>[ 0.118339] ** administrator! **
<4>[ 0.118339] ** **
<4>[ 0.118339] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.118339] **********************************************************
<6>[ 0.119752] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=22, Nodes=1
<6>[ 0.120149] ftrace: allocating 59560 entries in 233 pages
<6>[ 0.146766] ftrace: allocated 233 pages with 5 groups
<6>[ 0.148237] Dynamic Preempt: voluntary
<6>[ 0.149174] Running RCU self tests
<6>[ 0.149175] Running RCU synchronous self tests
<6>[ 0.149175] rcu: Preemptible hierarchical RCU implementation.
<6>[ 0.149176] rcu: RCU lockdep checking is enabled.
<6>[ 0.149176] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=22.
<6>[ 0.149177] Trampoline variant of Tasks RCU enabled.
<6>[ 0.149177] Rude variant of Tasks RCU enabled.
<6>[ 0.149177] Tracing variant of Tasks RCU enabled.
<6>[ 0.149178] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
<6>[ 0.149178] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=22
<6>[ 0.149266] Running RCU synchronous self tests
<6>[ 0.149271] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22.
<6>[ 0.149276] RCU Tasks Rude: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22.
<6>[ 0.149281] RCU Tasks Trace: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22.
<6>[ 0.160803] NR_IRQS: 524544, nr_irqs: 2232, preallocated irqs: 16
<6>[ 0.161327] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[ 0.161673] Console: colour dummy device 80x25
<6>[ 0.161683] printk: legacy console [tty0] enabled
<6>[ 0.162828] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<6>[ 0.162836] ... MAX_LOCKDEP_SUBCLASSES: 8
<6>[ 0.162839] ... MAX_LOCK_DEPTH: 48
<6>[ 0.162843] ... MAX_LOCKDEP_KEYS: 8192
<6>[ 0.162847] ... CLASSHASH_SIZE: 4096
<6>[ 0.162850] ... MAX_LOCKDEP_ENTRIES: 524288
<6>[ 0.162854] ... MAX_LOCKDEP_CHAINS: 524288
<6>[ 0.162858] ... CHAINHASH_SIZE: 262144
<6>[ 0.162862] memory used by lock dependency info: 54145 kB
<6>[ 0.162867] memory used for stack traces: 4224 kB
<6>[ 0.162871] per task-struct memory footprint: 1920 bytes
<6>[ 0.162945] ACPI: Core revision 20240827
<6>[ 0.163960] hpet: HPET dysfunctional in PC10. Force disabled.
<6>[ 0.164017] APIC: Switch to symmetric I/O mode setup
<6>[ 0.164023] DMAR: Host address width 42
<6>[ 0.164027] DMAR: DRHD base: 0x000000fc800000 flags: 0x0
<6>[ 0.164064] DMAR: dmar0: reg_base_addr fc800000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0ef5e
<6>[ 0.164072] DMAR: DRHD base: 0x000000fc801000 flags: 0x1
<6>[ 0.164092] DMAR: dmar1: reg_base_addr fc801000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0efde
<6>[ 0.164100] DMAR: SATC flags: 0x1
<6>[ 0.164109] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc801000 IOMMU 1
<6>[ 0.164114] DMAR-IR: HPET id 0 under DRHD base 0xfc801000
<6>[ 0.164119] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>[ 0.165837] DMAR-IR: Enabled IRQ remapping in x2apic mode
<6>[ 0.170225] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns
<6>[ 0.170245] Calibrating delay loop (skipped), value calculated using timer frequency.. 6758.40 BogoMIPS (lpj=3379200)
<6>[ 0.170309] CPU0: Thermal monitoring enabled (TM1)
<6>[ 0.170315] x86/cpu: User Mode Instruction Prevention (UMIP) activated
<6>[ 0.170516] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
<6>[ 0.170521] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
<6>[ 0.170528] process: using mwait in idle threads
<6>[ 0.170536] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
<6>[ 0.170544] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
<6>[ 0.170549] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
<6>[ 0.170556] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
<6>[ 0.170563] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
<6>[ 0.170580] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
<6>[ 0.170586] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
<6>[ 0.170591] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
<6>[ 0.170595] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
<6>[ 0.170601] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
<6>[ 0.170607] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
<6>[ 0.170612] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
<6>[ 0.170617] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
<6>[ 0.170622] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
<6>[ 0.171239] Freeing SMP alternatives memory: 48K
<6>[ 0.171239] pid_max: default: 32768 minimum: 301
<6>[ 0.171239] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm
<6>[ 0.171239] landlock: Up and running.
<6>[ 0.171239] Yama: becoming mindful.
<6>[ 0.171239] AppArmor: AppArmor initialized
<6>[ 0.171239] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.171239] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.171239] Running RCU synchronous self tests
<6>[ 0.171239] Running RCU synchronous self tests
<6>[ 0.171239] smpboot: CPU0: Intel(R) Core(TM) Ultra 7 1002H (family: 0x6, model: 0xaa, stepping: 0x4)
<6>[ 0.171239] Running RCU Tasks wait API self tests
<6>[ 0.171239] Running RCU Tasks Rude wait API self tests
<6>[ 0.171239] Running RCU Tasks Trace wait API self tests
<6>[ 0.171239] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Meteorlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
<6>[ 0.171461] core: cpu_core PMU driver:
<6>[ 0.171470] ... version: 5
<6>[ 0.171474] ... bit width: 48
<6>[ 0.171478] ... generic registers: 8
<6>[ 0.171481] ... value mask: 0000ffffffffffff
<6>[ 0.171486] ... max period: 00007fffffffffff
<6>[ 0.171491] ... fixed-purpose events: 4
<6>[ 0.171495] ... event mask: 0001000f000000ff
<6>[ 0.171549] signal: max sigframe size: 3632
<6>[ 0.171577] Estimated ratio of average max frequency by base frequency (times 1024): 1505
<6>[ 0.171695] rcu: Hierarchical SRCU implementation.
<6>[ 0.171699] rcu: Max phase no-delay instances is 400.
<6>[ 0.171867] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level
<6>[ 0.174510] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
<6>[ 0.175308] smp: Bringing up secondary CPUs ...
<6>[ 0.175707] smpboot: x86: Booting SMP configuration:
<6>[ 0.175715] .... node #0, CPUs: #1 #3
<6>[ 0.176405] Callback from call_rcu_tasks_trace() invoked.
<4>[ 0.179364] #6 #8 #10 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21
<6>[ 0.009779] core: cpu_atom PMU driver:
<6>[ 0.009779] ... version: 5
<6>[ 0.009779] ... bit width: 48
<6>[ 0.009779] ... generic registers: 8
<6>[ 0.009779] ... value mask: 0000ffffffffffff
<6>[ 0.009779] ... max period: 00007fffffffffff
<6>[ 0.009779] ... fixed-purpose events: 3
<6>[ 0.009779] ... event mask: 00000007000000ff
<4>[ 0.207398] #2 #4 #5 #7 #9 #11
<6>[ 0.216319] smp: Brought up 1 node, 22 CPUs
<6>[ 0.216319] smpboot: Total of 22 processors activated (148684.80 BogoMIPS)
<6>[ 0.219311] Memory: 32228184K/33040248K available (24294K kernel code, 5580K rwdata, 9252K rodata, 5628K init, 68404K bss, 778296K reserved, 0K cma-reserved)
<6>[ 0.223539] devtmpfs: initialized
<6>[ 0.223618] x86/mm: Memory block size: 128MB
<6>[ 0.242380] ACPI: PM: Registering ACPI NVS region [mem 0x63db7000-0x63edbfff] (1200128 bytes)
<6>[ 0.242871] Running RCU synchronous self tests
<6>[ 0.242889] Running RCU synchronous self tests
<6>[ 0.242908] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[ 0.243295] futex hash table entries: 8192 (order: 8, 1048576 bytes, linear)
<6>[ 0.243746] pinctrl core: initialized pinctrl subsystem
<6>[ 0.244226] PM: RTC time: 21:41:33, date: 2025-03-21
<6>[ 0.245106] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[ 0.246137] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
<6>[ 0.246525] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[ 0.246922] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[ 0.246978] audit: initializing netlink subsys (disabled)
<5>[ 0.247017] audit: type=2000 audit(1742593293.076:1): state=initialized audit_enabled=0 res=1
<6>[ 0.247795] thermal_sys: Registered thermal governor 'fair_share'
<6>[ 0.247796] thermal_sys: Registered thermal governor 'bang_bang'
<6>[ 0.247802] thermal_sys: Registered thermal governor 'step_wise'
<6>[ 0.247807] thermal_sys: Registered thermal governor 'user_space'
<6>[ 0.247812] thermal_sys: Registered thermal governor 'power_allocator'
<6>[ 0.247860] EISA bus registered
<6>[ 0.247890] cpuidle: using governor ladder
<6>[ 0.247890] cpuidle: using governor menu
<6>[ 0.248289] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[ 0.248773] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
<6>[ 0.248805] PCI: Using configuration type 1 for base access
<6>[ 0.248964] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
<6>[ 0.249547] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
<6>[ 0.249547] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
<6>[ 0.249547] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
<6>[ 0.249547] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
<6>[ 0.268240] raid6: avx2x4 gen() 56783 MB/s
<6>[ 0.285240] raid6: avx2x2 gen() 59594 MB/s
<6>[ 0.302239] raid6: avx2x1 gen() 58120 MB/s
<6>[ 0.302244] raid6: using algorithm avx2x2 gen() 59594 MB/s
<6>[ 0.319240] raid6: .... xor() 43776 MB/s, rmw enabled
<6>[ 0.319245] raid6: using avx2x2 recovery algorithm
<6>[ 0.319737] fbcon: Taking over console
<6>[ 0.319941] ACPI: Added _OSI(Module Device)
<6>[ 0.319946] ACPI: Added _OSI(Processor Device)
<6>[ 0.319949] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[ 0.319953] ACPI: Added _OSI(Processor Aggregator Device)
<6>[ 0.879392] ACPI: 28 ACPI AML tables successfully acquired and loaded
<6>[ 0.907191] ACPI: EC: EC started
<6>[ 0.907226] ACPI: EC: interrupt blocked
<6>[ 0.913634] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 0.913652] ACPI: EC: Boot ECDT EC used to handle transactions
<6>[ 0.972314] Callback from call_rcu_tasks() invoked.
<6>[ 1.222790] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.222811] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.316714] ACPI: Interpreter enabled
<6>[ 1.316909] ACPI: PM: (supports S0 S4 S5)
<6>[ 1.316918] ACPI: Using IOAPIC for interrupt routing
<6>[ 1.326959] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[ 1.326978] PCI: Ignoring E820 reservations for host bridge windows
<6>[ 1.377541] ACPI: Enabled 10 GPEs in block 00 to 7F
<6>[ 1.377580] ACPI: Enabled 8 GPEs in block 80 to DF
<6>[ 1.477234] ACPI: \_SB_.PC00.PAUD: New power resource
<6>[ 1.839085] ACPI: \_SB_.PC00.RP01.PXP_: New power resource
<6>[ 1.873029] ACPI: \_SB_.PC00.RP06.PXP_: New power resource
<6>[ 1.886473] ACPI: \_SB_.PC00.RP07.PXP_: New power resource
<6>[ 1.911896] ACPI: \_SB_.PC00.RP09.PXP_: New power resource
<6>[ 1.923310] ACPI: \_SB_.PC00.RP10.PXP_: New power resource
<6>[ 1.935966] ACPI: \_SB_.PC00.RP11.PXP_: New power resource
<6>[ 1.948311] ACPI: \_SB_.PC00.RP12.PXP_: New power resource
<6>[ 2.175268] ACPI: \_SB_.PC00.TBT0: New power resource
<6>[ 2.175848] ACPI: \_SB_.PC00.TBT1: New power resource
<6>[ 2.176382] ACPI: \_SB_.PC00.D3C_: New power resource
<6>[ 2.313139] ACPI: \_TZ_.FN00: New power resource
<6>[ 2.313771] ACPI: \_TZ_.FN01: New power resource
<6>[ 2.314328] ACPI: \_TZ_.FN02: New power resource
<6>[ 2.314915] ACPI: \_TZ_.FN03: New power resource
<6>[ 2.315810] ACPI: \_TZ_.FN04: New power resource
<6>[ 2.318722] ACPI: \PIN_: New power resource
<6>[ 2.322657] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
<6>[ 2.322691] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
<6>[ 2.326776] acpi PNP0A08:00: _OSC: platform does not support [AER]
<6>[ 2.334491] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME PCIeCapability LTR DPC]
<6>[ 2.357901] PCI host bridge to bus 0000:00
<6>[ 2.357962] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
<6>[ 2.357979] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
<6>[ 2.357993] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[ 2.358009] pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff window]
<6>[ 2.358025] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x3ffbfffffff window]
<6>[ 2.358044] pci_bus 0000:00: root bus resource [bus 00-fe]
<6>[ 2.374106] pci 0000:00:00.0: [8086:7d01] type 00 class 0x060000 conventional PCI endpoint
<6>[ 2.374708] pci 0000:00:02.0: [8086:7d55] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
<6>[ 2.374742] pci 0000:00:02.0: BAR 0 [mem 0x5018000000-0x5018ffffff 64bit pref]
<6>[ 2.374750] pci 0000:00:02.0: BAR 2 [mem 0x4000000000-0x400fffffff 64bit pref]
<6>[ 2.374783] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics
<6>[ 2.374791] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6>[ 2.374840] pci 0000:00:02.0: PME# supported from D0 D3hot
<6>[ 2.374875] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x00ffffff 64bit pref]
<6>[ 2.374881] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x06ffffff 64bit pref]: contains BAR 0 for 7 VFs
<6>[ 2.376182] pci 0000:00:04.0: [8086:7d03] type 00 class 0x118000 conventional PCI endpoint
<6>[ 2.376224] pci 0000:00:04.0: BAR 0 [mem 0x501a280000-0x501a29ffff 64bit]
<6>[ 2.377533] pci 0000:00:05.0: [8086:7d19] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint
<6>[ 2.377560] pci 0000:00:05.0: BAR 0 [mem 0x5019000000-0x5019ffffff 64bit]
<6>[ 2.377571] pci 0000:00:05.0: enabling Extended Tags
<6>[ 2.378478] pci 0000:00:06.0: [8086:7ecb] type 01 class 0x060400 PCIe Root Port
<6>[ 2.378507] pci 0000:00:06.0: PCI bridge to [bus 01]
<6>[ 2.378519] pci 0000:00:06.0: bridge window [mem 0x8c000000-0x8c0fffff]
<6>[ 2.378635] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
<6>[ 2.378688] pci 0000:00:06.0: PTM enabled (root), 4ns granularity
<6>[ 2.383781] pci 0000:00:07.0: [8086:7ec6] type 01 class 0x060400 PCIe Root Port
<6>[ 2.383813] pci 0000:00:07.0: PCI bridge to [bus 02-2b]
<6>[ 2.383822] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff]
<6>[ 2.383836] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref]
<6>[ 2.383927] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<6>[ 2.383965] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
<6>[ 2.387320] pci 0000:00:07.3: [8086:7ec7] type 01 class 0x060400 PCIe Root Port
<6>[ 2.387350] pci 0000:00:07.3: PCI bridge to [bus 2c-55]
<6>[ 2.387359] pci 0000:00:07.3: bridge window [mem 0x80000000-0x85ffffff]
<6>[ 2.387373] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref]
<6>[ 2.387458] pci 0000:00:07.3: PME# supported from D0 D3hot D3cold
<6>[ 2.387502] pci 0000:00:07.3: PTM enabled (root), 4ns granularity
<6>[ 2.392678] pci 0000:00:08.0: [8086:7e4c] type 00 class 0x088000 conventional PCI endpoint
<6>[ 2.392725] pci 0000:00:08.0: BAR 0 [mem 0x501a2e3000-0x501a2e3fff 64bit]
<6>[ 2.393113] pci 0000:00:0a.0: [8086:7d0d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
<6>[ 2.393139] pci 0000:00:0a.0: BAR 0 [mem 0x501a240000-0x501a27ffff 64bit]
<6>[ 2.393149] pci 0000:00:0a.0: enabling Extended Tags
<6>[ 2.393325] pci 0000:00:0b.0: [8086:7d1d] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint
<6>[ 2.393353] pci 0000:00:0b.0: BAR 0 [mem 0x5010000000-0x5017ffffff 64bit]
<6>[ 2.393361] pci 0000:00:0b.0: BAR 4 [mem 0x501a2e2000-0x501a2e2fff 64bit]
<6>[ 2.393784] pci 0000:00:0d.0: [8086:7ec0] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 2.393835] pci 0000:00:0d.0: BAR 0 [mem 0x501a2c0000-0x501a2cffff 64bit]
<6>[ 2.393900] pci 0000:00:0d.0: PME# supported from D3hot D3cold
<6>[ 2.396271] pci 0000:00:0d.3: [8086:7ec3] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 2.396271] pci 0000:00:0d.3: BAR 0 [mem 0x501a200000-0x501a23ffff 64bit]
<6>[ 2.396271] pci 0000:00:0d.3: BAR 2 [mem 0x501a2e1000-0x501a2e1fff 64bit]
<6>[ 2.396271] pci 0000:00:0d.3: supports D1 D2
<6>[ 2.396271] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.397081] pci 0000:00:12.0: [8086:7e45] type 00 class 0x070000 conventional PCI endpoint
<6>[ 2.397119] pci 0000:00:12.0: BAR 0 [mem 0x501a2b0000-0x501a2bffff 64bit]
<6>[ 2.397167] pci 0000:00:12.0: PME# supported from D0 D3hot
<6>[ 2.400323] pci 0000:00:14.0: [8086:7e7d] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 2.400362] pci 0000:00:14.0: BAR 0 [mem 0x501a2a0000-0x501a2affff 64bit]
<6>[ 2.400413] pci 0000:00:14.0: PME# supported from D3hot D3cold
<6>[ 2.402740] pci 0000:00:14.2: [8086:7e7f] type 00 class 0x050000 conventional PCI endpoint
<6>[ 2.402788] pci 0000:00:14.2: BAR 0 [mem 0x501a2d4000-0x501a2d7fff 64bit]
<6>[ 2.402796] pci 0000:00:14.2: BAR 2 [mem 0x501a2e0000-0x501a2e0fff 64bit]
<6>[ 2.403079] pci 0000:00:15.0: [8086:7e78] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.403155] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.404588] pci 0000:00:15.1: [8086:7e79] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.404671] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.406435] pci 0000:00:15.2: [8086:7e7a] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.406518] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.408271] pci 0000:00:15.3: [8086:7e7b] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.408271] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.410243] pci 0000:00:16.0: [8086:7e70] type 00 class 0x078000 conventional PCI endpoint
<6>[ 2.410243] pci 0000:00:16.0: BAR 0 [mem 0x501a2db000-0x501a2dbfff 64bit]
<6>[ 2.410243] pci 0000:00:16.0: PME# supported from D3hot
<6>[ 2.412269] pci 0000:00:16.3: [8086:7e73] type 00 class 0x070002 conventional PCI endpoint
<6>[ 2.412278] pci 0000:00:16.3: BAR 0 [io 0x3020-0x3027]
<6>[ 2.412284] pci 0000:00:16.3: BAR 1 [mem 0x8c121000-0x8c121fff]
<6>[ 2.412785] pci 0000:00:19.0: [8086:7e50] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.412862] pci 0000:00:19.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.413475] pci 0000:00:19.1: [8086:7e51] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.413554] pci 0000:00:19.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.414956] pci 0000:00:1f.0: [8086:7e02] type 00 class 0x060100 conventional PCI endpoint
<6>[ 2.416351] pci 0000:00:1f.3: [8086:7e28] type 00 class 0x040100 conventional PCI endpoint
<6>[ 2.416470] pci 0000:00:1f.3: BAR 0 [mem 0x501a2d0000-0x501a2d3fff 64bit]
<6>[ 2.416484] pci 0000:00:1f.3: BAR 4 [mem 0x501a000000-0x501a1fffff 64bit]
<6>[ 2.416565] pci 0000:00:1f.3: PME# supported from D3hot D3cold
<6>[ 2.416927] pci 0000:00:1f.4: [8086:7e22] type 00 class 0x0c0500 conventional PCI endpoint
<6>[ 2.416974] pci 0000:00:1f.4: BAR 0 [mem 0x501a2d8000-0x501a2d80ff 64bit]
<6>[ 2.416985] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf]
<6>[ 2.418172] pci 0000:00:1f.5: [8086:7e23] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.418277] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
<6>[ 2.418467] pci 0000:00:1f.6: [8086:550a] type 00 class 0x020000 conventional PCI endpoint
<6>[ 2.418547] pci 0000:00:1f.6: BAR 0 [mem 0x8c100000-0x8c11ffff]
<6>[ 2.418618] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
<6>[ 2.420147] pci 0000:01:00.0: [15b7:501e] type 00 class 0x010802 PCIe Endpoint
<6>[ 2.420209] pci 0000:01:00.0: BAR 0 [mem 0x8c000000-0x8c003fff 64bit]
<6>[ 2.421413] pci 0000:00:06.0: PCI bridge to [bus 01]
<6>[ 2.421588] pci 0000:00:07.0: PCI bridge to [bus 02-2b]
<6>[ 2.421731] pci 0000:00:07.3: PCI bridge to [bus 2c-55]
<6>[ 2.825408] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1)
<6>[ 7.631355] Low-power S0 idle used by default for system suspend
<6>[ 7.705430] ACPI: EC: interrupt unblocked
<6>[ 7.705448] ACPI: EC: event unblocked
<6>[ 7.706239] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 7.706239] ACPI: EC: GPE=0x6e
<6>[ 7.706239] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete
<6>[ 7.706239] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
<6>[ 7.708213] iommu: Default domain type: Translated
<6>[ 7.708222] iommu: DMA domain TLB invalidation policy: lazy mode
<5>[ 7.709590] SCSI subsystem initialized
<7>[ 7.709654] libata version 3.00 loaded.
<6>[ 7.709654] ACPI: bus type USB registered
<6>[ 7.709654] usbcore: registered new interface driver usbfs
<6>[ 7.709654] usbcore: registered new interface driver hub
<6>[ 7.709654] usbcore: registered new device driver usb
<6>[ 7.710279] pps_core: LinuxPPS API ver. 1 registered
<6>[ 7.710283] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[ 7.710307] PTP clock support registered
<6>[ 7.710396] EDAC MC: Ver: 3.0.0
<6>[ 7.711706] efivars: Registered efivars operations
<6>[ 7.713385] NetLabel: Initializing
<6>[ 7.713391] NetLabel: domain hash size = 128
<6>[ 7.713396] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
<6>[ 7.713485] NetLabel: unlabeled traffic allowed by default
<6>[ 7.713504] mctp: management component transport protocol core
<6>[ 7.713511] NET: Registered PF_MCTP protocol family
<6>[ 7.713561] PCI: Using ACPI for IRQ routing
<7>[ 7.730200] PCI: pci_cache_line_size set to 64 bytes
<6>[ 7.730352] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
<7>[ 7.730639] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
<7>[ 7.730655] e820: reserve RAM buffer [mem 0x5ae00000-0x5bffffff]
<7>[ 7.730660] e820: reserve RAM buffer [mem 0x5bda0000-0x5bffffff]
<7>[ 7.730664] e820: reserve RAM buffer [mem 0x60a3f000-0x63ffffff]
<6>[ 7.731298] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6>[ 7.731302] pci 0000:00:02.0: vgaarb: bridge control possible
<6>[ 7.731312] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
<6>[ 7.731312] vgaarb: loaded
<6>[ 7.731603] clocksource: Switched to clocksource tsc-early
<5>[ 7.736751] VFS: Disk quotas dquot_6.6.0
<6>[ 7.736811] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[ 7.738409] AppArmor: AppArmor Filesystem Enabled
<6>[ 7.738698] pnp: PnP ACPI init
<6>[ 7.740300] system 00:00: [io 0x0680-0x069f] has been reserved
<6>[ 7.740320] system 00:00: [io 0x164e-0x164f] has been reserved
<6>[ 7.741269] system 00:01: [io 0x1854-0x1857] has been reserved
<6>[ 7.743593] system 00:03: [io 0x06a4] has been reserved
<6>[ 7.743610] system 00:03: [io 0x06a0] has been reserved
<4>[ 7.782396] pnp 00:04: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref]
<4>[ 7.782421] pnp 00:04: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref]
<6>[ 7.782640] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved
<6>[ 7.782659] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved
<6>[ 7.782683] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved
<6>[ 7.782702] system 00:04: [mem 0xfc800000-0xfc81ffff] could not be reserved
<6>[ 7.782722] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved
<6>[ 7.782738] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved
<6>[ 7.792065] system 00:05: [io 0x2000-0x20fe] has been reserved
<4>[ 7.794056] pnp 00:07: disabling [mem 0x00000000-0x0009cfff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref]
<6>[ 7.799828] pnp: PnP ACPI: found 8 devices
<6>[ 7.816560] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<6>[ 7.816961] NET: Registered PF_INET protocol family
<6>[ 7.817271] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 7.820920] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear)
<6>[ 7.821066] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[ 7.821319] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 7.822409] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage)
<6>[ 7.823423] TCP: Hash tables configured (established 262144 bind 65536)
<6>[ 7.824023] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 7.824759] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 7.825450] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[ 7.825507] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2
<6>[ 7.825541] pci 0000:00:02.0: VF BAR 0 [mem 0x501b000000-0x5021ffffff 64bit pref]: assigned
<6>[ 7.825553] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned
<6>[ 7.825558] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff]: assigned
<6>[ 7.825564] pci 0000:00:15.0: BAR 0 [mem 0x501a2d9000-0x501a2d9fff 64bit]: assigned
<6>[ 7.825609] pci 0000:00:15.1: BAR 0 [mem 0x501a2da000-0x501a2dafff 64bit]: assigned
<6>[ 7.825652] pci 0000:00:15.2: BAR 0 [mem 0x501a2dc000-0x501a2dcfff 64bit]: assigned
<6>[ 7.825695] pci 0000:00:15.3: BAR 0 [mem 0x501a2dd000-0x501a2ddfff 64bit]: assigned
<6>[ 7.825738] pci 0000:00:19.0: BAR 0 [mem 0x501a2de000-0x501a2defff 64bit]: assigned
<6>[ 7.825784] pci 0000:00:19.1: BAR 0 [mem 0x501a2df000-0x501a2dffff 64bit]: assigned
<6>[ 7.825827] pci 0000:00:1f.5: BAR 0 [mem 0x8c120000-0x8c120fff]: assigned
<6>[ 7.825849] pci 0000:00:06.0: PCI bridge to [bus 01]
<6>[ 7.825859] pci 0000:00:06.0: bridge window [mem 0x8c000000-0x8c0fffff]
<6>[ 7.825869] pci 0000:00:07.0: PCI bridge to [bus 02-2b]
<6>[ 7.825878] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]
<6>[ 7.825885] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff]
<6>[ 7.825892] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref]
<6>[ 7.825902] pci 0000:00:07.3: PCI bridge to [bus 2c-55]
<6>[ 7.825907] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff]
<6>[ 7.825921] pci 0000:00:07.3: bridge window [mem 0x80000000-0x85ffffff]
<6>[ 7.825928] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref]
<6>[ 7.825938] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
<6>[ 7.825943] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
<6>[ 7.825948] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[ 7.825953] pci_bus 0000:00: resource 7 [mem 0x80000000-0xbfffffff window]
<6>[ 7.825958] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x3ffbfffffff window]
<6>[ 7.825964] pci_bus 0000:01: resource 1 [mem 0x8c000000-0x8c0fffff]
<6>[ 7.825969] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
<6>[ 7.825973] pci_bus 0000:02: resource 1 [mem 0x86000000-0x8bffffff]
<6>[ 7.825978] pci_bus 0000:02: resource 2 [mem 0x4010000000-0x480fffffff 64bit pref]
<6>[ 7.825984] pci_bus 0000:2c: resource 0 [io 0x5000-0x5fff]
<6>[ 7.825988] pci_bus 0000:2c: resource 1 [mem 0x80000000-0x85ffffff]
<6>[ 7.825993] pci_bus 0000:2c: resource 2 [mem 0x4810000000-0x500fffffff 64bit pref]
<6>[ 7.827246] pci 0000:00:0d.0: enabling device (0000 -> 0002)
<6>[ 7.829197] PCI: CLS 0 bytes, default 64
<6>[ 7.829300] DMAR: No RMRR found
<6>[ 7.829318] DMAR: No ATSR found
<6>[ 7.829321] DMAR: dmar0: Using Queued invalidation
<6>[ 7.829342] DMAR: dmar1: Using Queued invalidation
<6>[ 7.830206] pci 0000:00:02.0: Adding to iommu group 0
<6>[ 7.831317] pci 0000:00:00.0: Adding to iommu group 1
<6>[ 7.831370] pci 0000:00:04.0: Adding to iommu group 2
<6>[ 7.831418] pci 0000:00:05.0: Adding to iommu group 3
<6>[ 7.831487] pci 0000:00:06.0: Adding to iommu group 4
<6>[ 7.831549] pci 0000:00:07.0: Adding to iommu group 5
<6>[ 7.831602] pci 0000:00:07.3: Adding to iommu group 6
<6>[ 7.831649] pci 0000:00:08.0: Adding to iommu group 7
<6>[ 7.831696] pci 0000:00:0a.0: Adding to iommu group 8
<6>[ 7.831743] pci 0000:00:0b.0: Adding to iommu group 9
<6>[ 7.831807] pci 0000:00:0d.0: Adding to iommu group 10
<6>[ 7.831841] pci 0000:00:0d.3: Adding to iommu group 10
<6>[ 7.831894] pci 0000:00:12.0: Adding to iommu group 11
<6>[ 7.831958] pci 0000:00:14.0: Adding to iommu group 12
<6>[ 7.831998] pci 0000:00:14.2: Adding to iommu group 12
<6>[ 7.832071] pci 0000:00:15.0: Adding to iommu group 13
<6>[ 7.832109] pci 0000:00:15.1: Adding to iommu group 13
<6>[ 7.832145] pci 0000:00:15.2: Adding to iommu group 13
<6>[ 7.832182] pci 0000:00:15.3: Adding to iommu group 13
<6>[ 7.832244] pci 0000:00:16.0: Adding to iommu group 14
<6>[ 7.832282] pci 0000:00:16.3: Adding to iommu group 14
<6>[ 7.832342] pci 0000:00:19.0: Adding to iommu group 15
<6>[ 7.832379] pci 0000:00:19.1: Adding to iommu group 15
<6>[ 7.832461] pci 0000:00:1f.0: Adding to iommu group 16
<6>[ 7.832503] pci 0000:00:1f.3: Adding to iommu group 16
<6>[ 7.832543] pci 0000:00:1f.4: Adding to iommu group 16
<6>[ 7.832582] pci 0000:00:1f.5: Adding to iommu group 16
<6>[ 7.832620] pci 0000:00:1f.6: Adding to iommu group 16
<6>[ 7.832689] pci 0000:01:00.0: Adding to iommu group 17
<6>[ 7.851728] DMAR: Intel(R) Virtualization Technology for Directed I/O
<6>[ 7.851744] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[ 7.851755] software IO TLB: mapped [mem 0x0000000056e00000-0x000000005ae00000] (64MB)
<6>[ 7.853354] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns
<6>[ 7.853439] clocksource: Switched to clocksource tsc
<6>[ 7.853604] platform rtc_cmos: registered platform RTC device (no PNP device found)
<5>[ 7.861421] Initialise system trusted keyrings
<5>[ 7.861520] Key type blacklist registered
<6>[ 7.861801] workingset: timestamp_bits=36 max_order=23 bucket_order=0
<6>[ 7.873618] zbud: loaded
<6>[ 7.875209] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 7.875353] ntfs3: Enabled Linux POSIX ACLs support
<6>[ 7.875363] ntfs3: Read-only LZX/Xpress compression included
<5>[ 7.875903] integrity: Platform Keyring initialized
<5>[ 7.875931] integrity: Machine keyring initialized
<6>[ 7.884128] xor: automatically using best checksumming function avx
<5>[ 7.884142] Key type asymmetric registered
<5>[ 7.884157] Asymmetric key parser 'x509' registered
<6>[ 7.884299] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
<6>[ 7.884598] io scheduler mq-deadline registered
<6>[ 7.885933] ledtrig-cpu: registered to indicate activity on CPUs
<6>[ 7.888304] pcieport 0000:00:06.0: PME: Signaling with IRQ 122
<6>[ 7.890361] pcieport 0000:00:07.0: PME: Signaling with IRQ 123
<6>[ 7.892186] pcieport 0000:00:07.3: PME: Signaling with IRQ 124
<6>[ 7.892509] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<6>[ 7.900459] ACPI: AC: AC Adapter [ADP1] (on-line)
<6>[ 7.900837] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:00/PNP0C0D:00/input/input0
<6>[ 7.901190] ACPI: button: Lid Switch [LID0]
<6>[ 7.901509] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
<6>[ 7.901693] ACPI: button: Sleep Button [SLPB]
<6>[ 7.901943] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
<6>[ 7.902112] ACPI: button: Power Button [PWRB]
<6>[ 8.008757] thermal LNXTHERM:00: registered as thermal_zone0
<6>[ 8.008773] ACPI: thermal: Thermal Zone [TZ00] (39 C)
<6>[ 8.010268] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[ 8.010439] ACPI: battery: Slot [BAT1] (battery absent)
<6>[ 8.011967] ACPI: battery: Slot [BAT0] (battery present)
<6>[ 8.033282] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
<6>[ 8.048555] serial 0000:00:12.0: enabling device (0000 -> 0002)
<6>[ 8.051366] serial 0000:00:16.3: enabling device (0001 -> 0003)
<6>[ 8.074535] 0000:00:16.3: ttyS4 at I/O 0x3020 (irq = 19, base_baud = 115200) is a 16550A
<4>[ 8.076713] hpet_acpi_add: no address or irqs in _CRS
<6>[ 8.076841] Linux agpgart interface v0.103
<6>[ 8.105093] ACPI: bus type drm_connector registered
<6>[ 8.133116] loop: module loaded
<6>[ 8.193813] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
<6>[ 8.329815] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
<6>[ 8.422904] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
<6>[ 8.529577] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
<6>[ 8.651894] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002)
<6>[ 8.790839] intel-lpss 0000:00:19.1: enabling device (0000 -> 0002)
<5>[ 8.885022] Key type psk registered
<6>[ 8.887488] nvme 0000:01:00.0: platform quirk: setting simple suspend
<6>[ 8.888004] tun: Universal TUN/TAP device driver, 1.6
<6>[ 8.888256] nvme nvme0: pci function 0000:01:00.0
<6>[ 8.888642] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 8.888718] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
<6>[ 8.890442] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 8.891737] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 8.891753] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
<6>[ 8.891765] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 8.892038] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 8.892057] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 8.892064] usb usb1: Product: xHCI Host Controller
<6>[ 8.892069] usb usb1: Manufacturer: Linux 6.14.0-rc7-CI_DRM_16300-g74f632d1bd3b+ xhci-hcd
<6>[ 8.892076] usb usb1: SerialNumber: 0000:00:0d.0
<6>[ 8.892825] hub 1-0:1.0: USB hub found
<6>[ 8.892920] hub 1-0:1.0: 1 port detected
<6>[ 8.895999] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 8.896015] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 8.896025] usb usb2: Product: xHCI Host Controller
<6>[ 8.896034] usb usb2: Manufacturer: Linux 6.14.0-rc7-CI_DRM_16300-g74f632d1bd3b+ xhci-hcd
<6>[ 8.896045] usb usb2: SerialNumber: 0000:00:0d.0
<6>[ 8.896841] hub 2-0:1.0: USB hub found
<6>[ 8.896893] hub 2-0:1.0: 4 ports detected
<6>[ 8.916876] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 8.916898] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
<6>[ 8.918422] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 8.919504] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 8.919518] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
<6>[ 8.919529] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 8.919665] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 8.919673] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 8.919679] usb usb3: Product: xHCI Host Controller
<6>[ 8.919683] usb usb3: Manufacturer: Linux 6.14.0-rc7-CI_DRM_16300-g74f632d1bd3b+ xhci-hcd
<6>[ 8.919690] usb usb3: SerialNumber: 0000:00:14.0
<6>[ 8.920292] hub 3-0:1.0: USB hub found
<6>[ 8.920332] hub 3-0:1.0: 12 ports detected
<6>[ 8.946246] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 8.946265] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 8.946277] usb usb4: Product: xHCI Host Controller
<6>[ 8.946286] usb usb4: Manufacturer: Linux 6.14.0-rc7-CI_DRM_16300-g74f632d1bd3b+ xhci-hcd
<6>[ 8.946300] usb usb4: SerialNumber: 0000:00:14.0
<6>[ 8.946937] hub 4-0:1.0: USB hub found
<6>[ 8.946982] hub 4-0:1.0: 2 ports detected
<6>[ 8.952545] usbcore: registered new interface driver usb-storage
<6>[ 8.952698] usbcore: registered new interface driver usbserial_generic
<6>[ 8.952777] usbserial: USB Serial support registered for generic
<6>[ 8.952852] usbcore: registered new interface driver ftdi_sio
<6>[ 8.952902] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[ 8.952972] usbcore: registered new interface driver pl2303
<6>[ 8.953011] usbserial: USB Serial support registered for pl2303
<6>[ 8.953156] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>[ 8.953168] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<6>[ 8.961388] nvme nvme0: allocated 64 MiB host memory buffer (1 segment).
<6>[ 8.996107] nvme nvme0: 16/0/0 default/read/poll queues
<6>[ 9.005960] nvme0n1: p1 p2
<3>[ 9.654502] i8042: Can't read CTR while initializing i8042
<3>[ 9.654516] i8042 i8042: probe with driver i8042 failed with error -5
<6>[ 9.655083] mousedev: PS/2 mouse device common for all mice
<6>[ 9.656623] rtc_cmos rtc_cmos: RTC can wake from S4
<6>[ 9.658255] rtc_cmos rtc_cmos: registered as rtc0
<6>[ 9.658436] rtc_cmos rtc_cmos: setting system clock to 2025-03-21T21:41:42 UTC (1742593302)
<6>[ 9.658611] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
<6>[ 9.658665] i2c_dev: i2c /dev entries driver
<6>[ 9.663248] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0)
<6>[ 9.663267] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
<4>[ 9.663280] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
<6>[ 9.663327] device-mapper: uevent: version 1.0.3
<6>[ 9.663681] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
<6>[ 9.663817] platform eisa.0: Probing EISA bus 0
<4>[ 9.663832] platform eisa.0: EISA: Cannot allocate resource for mainboard
<4>[ 9.663849] platform eisa.0: Cannot allocate resource for EISA slot 1
<4>[ 9.663863] platform eisa.0: Cannot allocate resource for EISA slot 2
<4>[ 9.663877] platform eisa.0: Cannot allocate resource for EISA slot 3
<4>[ 9.663891] platform eisa.0: Cannot allocate resource for EISA slot 4
<4>[ 9.663904] platform eisa.0: Cannot allocate resource for EISA slot 5
<4>[ 9.663918] platform eisa.0: Cannot allocate resource for EISA slot 6
<4>[ 9.663931] platform eisa.0: Cannot allocate resource for EISA slot 7
<4>[ 9.663945] platform eisa.0: Cannot allocate resource for EISA slot 8
<6>[ 9.663956] platform eisa.0: EISA: Detected 0 cards
<6>[ 9.663966] intel_pstate: Intel P-state driver initializing
<6>[ 9.674026] intel_pstate: HWP enabled
<6>[ 9.674034] sdhci: Secure Digital Host Controller Interface driver
<6>[ 9.674039] sdhci: Copyright(c) Pierre Ossman
<6>[ 9.674129] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 9.676589] drop_monitor: Initializing network drop monitor service
<6>[ 9.676808] NET: Registered PF_INET6 protocol family
<6>[ 9.680950] Segment Routing with IPv6
<6>[ 9.680987] In-situ OAM (IOAM) with IPv6
<6>[ 9.681031] NET: Registered PF_PACKET protocol family
<5>[ 9.681255] Key type dns_resolver registered
<4>[ 9.691986] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<6>[ 9.693557] microcode: Current revision: 0x0000001c
<6>[ 9.695220] IPI shorthand broadcast: enabled
<6>[ 9.705009] sched_clock: Marking stable (9696000775, 8779578)->(9792508193, -87727840)
<6>[ 9.706579] registered taskstats version 1
<5>[ 9.709741] Loading compiled-in X.509 certificates
<6>[ 9.739939] Demotion targets for Node 0: null
<6>[ 9.740331] kmemleak: Kernel memory leak detector initialized (mem pool available: 14933)
<6>[ 9.740344] kmemleak: Automatic memory scanning thread started
<5>[ 9.740538] Key type .fscrypt registered
<5>[ 9.740543] Key type fscrypt-provisioning registered
<6>[ 9.743445] Btrfs loaded, zoned=yes, fsverity=yes
<5>[ 9.743563] Key type trusted registered
<5>[ 9.749399] Key type encrypted registered
<6>[ 9.749407] AppArmor: AppArmor sha256 policy hashing enabled
<5>[ 9.749532] Loading compiled-in module X.509 certificates
<5>[ 9.750181] Loaded X.509 cert 'Build time autogenerated kernel key: a38d5f1398ab3d391b0f3446eb7f49ecf7a49e7e'
<6>[ 9.750192] ima: Allocated hash algorithm: sha256
<6>[ 9.790533] ima: No architecture policies found
<6>[ 9.790666] evm: Initialising EVM extended attributes:
<6>[ 9.790671] evm: security.selinux
<6>[ 9.790675] evm: security.SMACK64
<6>[ 9.790678] evm: security.SMACK64EXEC
<6>[ 9.790682] evm: security.SMACK64TRANSMUTE
<6>[ 9.790686] evm: security.SMACK64MMAP
<6>[ 9.790690] evm: security.apparmor
<6>[ 9.790693] evm: security.ima
<6>[ 9.790697] evm: security.capability
<6>[ 9.790700] evm: HMAC attrs: 0x1
<6>[ 9.793123] PM: Magic number: 1:920:702
<6>[ 9.793402] printk: legacy console [netcon0] enabled
<6>[ 9.793411] netconsole: network logging started
<6>[ 9.794041] RAS: Correctable Errors collector initialized.
<6>[ 9.794222] clk: Disabling unused clocks
<6>[ 9.794802] PM: genpd: Disabling unused power domains
<6>[ 9.794960] md: Waiting for all devices to be available before autodetect
<6>[ 9.794966] md: If you don't use raid, use raid=noautodetect
<6>[ 9.794970] md: Autodetecting RAID arrays.
<6>[ 9.794977] md: autorun ...
<6>[ 9.794980] md: ... autorun DONE.
<6>[ 9.866106] EXT4-fs (nvme0n1p2): mounted filesystem e897e6a4-40b0-49f9-9d3b-0cd454a26cc8 ro with ordered data mode. Quota mode: none.
<6>[ 9.866178] VFS: Mounted root (ext4 filesystem) readonly on device 259:2.
<6>[ 9.867097] devtmpfs: mounted
<6>[ 9.868273] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
<6>[ 9.879339] Freeing unused decrypted memory: 2028K
<6>[ 9.881007] Freeing unused kernel image (initmem) memory: 5628K
<6>[ 9.881035] Write protecting the kernel read-only data: 34816k
<6>[ 9.882433] Freeing unused kernel image (text/rodata gap) memory: 280K
<6>[ 9.882544] usb 4-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
<6>[ 9.882598] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
<6>[ 9.882620] usb 4-1: Product: USB 10/100/1000 LAN
<6>[ 9.882637] usb 4-1: Manufacturer: Realtek
<6>[ 9.882652] usb 4-1: SerialNumber: 000001
<6>[ 9.883374] Freeing unused kernel image (rodata/data gap) memory: 988K
<6>[ 9.889496] x86/mm: Checked W+X mappings: passed, no W+X pages found.
<6>[ 9.889607] Run /sbin/init as init process
<7>[ 9.889646] with arguments:
<7>[ 9.889652] /sbin/init
<7>[ 9.889656] with environment:
<7>[ 9.889660] HOME=/
<7>[ 9.889664] TERM=linux
<7>[ 9.889667] BOOT_IMAGE=/boot/drm_intel
<7>[ 9.967639] systemd[1]: Inserted module 'autofs4'
<7>[ 9.992871] systemd[1]: systemd 255.4-1ubuntu8.5 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
<7>[ 9.992962] systemd[1]: Detected architecture x86-64.
<7>[ 9.994902] systemd[1]: Hostname set to <shard-mtlp-3>.
<7>[ 10.268373] systemd[1]: Queued start job for default target graphical.target.
<7>[ 10.300336] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
<7>[ 10.302049] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
<7>[ 10.303495] systemd[1]: Created slice user.slice - User and Session Slice.
<7>[ 10.303753] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
<7>[ 10.304406] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
<7>[ 10.304536] systemd[1]: Expecting device dev-disk-by\x2duuid-35F9\x2d498D.device - /dev/disk/by-uuid/35F9-498D...
<7>[ 10.304624] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
<7>[ 10.304711] systemd[1]: Reached target slices.target - Slice Units.
<7>[ 10.304796] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
<7>[ 10.304872] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
<7>[ 10.304948] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
<7>[ 10.305205] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
<7>[ 10.305598] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
<7>[ 10.305899] systemd[1]: Listening on multipathd.socket - multipathd control socket.
<7>[ 10.306232] systemd[1]: Listening on syslog.socket - Syslog Socket.
<7>[ 10.306508] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
<7>[ 10.306736] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
<7>[ 10.307045] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
<7>[ 10.307383] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
<7>[ 10.307675] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
<7>[ 10.307876] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 10.308193] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
<7>[ 10.308470] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
<7>[ 10.311699] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
<7>[ 10.314549] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
<7>[ 10.317902] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
<7>[ 10.321448] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
<7>[ 10.328662] systemd[1]: Starting systemd-journald.service - Journal Service...
<7>[ 10.331655] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
<7>[ 10.334601] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
<7>[ 10.337550] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
<7>[ 10.339758] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
<7>[ 10.342860] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
<7>[ 10.345023] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
<7>[ 10.347922] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
<7>[ 10.351991] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
<7>[ 10.352773] systemd-journald[308]: Collecting audit messages is disabled.
<7>[ 10.356385] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
<7>[ 10.359509] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
<7>[ 10.359814] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
<7>[ 10.364799] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
<6>[ 10.366407] pstore: Using crash dump compression: deflate
<6>[ 10.367853] pstore: Registered efi_pstore as persistent store backend
<7>[ 10.369926] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
<7>[ 10.370731] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 10.371755] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 10.375368] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
<6>[ 10.378205] fuse: init (API version 7.42)
<7>[ 10.383217] systemd[1]: Started systemd-journald.service - Journal Service.
<6>[ 10.535922] EXT4-fs (nvme0n1p2): re-mounted e897e6a4-40b0-49f9-9d3b-0cd454a26cc8 r/w. Quota mode: none.
<6>[ 10.569217] Adding 8388604k swap on /swap.img. Priority:-2 extents:67 across:266928128k SS
<7>[ 10.582372] systemd-journald[308]: Received client request to flush runtime journal.
<7>[ 10.606505] systemd-journald[308]: /var/log/journal/43eddede42f94c1fb09402fe12a9ae82/system.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 10.606520] systemd-journald[308]: Rotating system journal.
<4>[ 11.273458] nvme nvme0: using unchecked data buffer
<6>[ 11.415796] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002)
<6>[ 11.507645] input: Intel HID events as /devices/platform/INTC1077:00/input/input3
<6>[ 11.522319] intel-hid INTC1077:00: platform supports 5 button array
<6>[ 11.537220] input: Intel HID 5 button array as /devices/platform/INTC1077:00/input/input4
<6>[ 11.544097] pci 0000:00:08.0: Setting to D3hot
<6>[ 11.556273] pci 0000:00:05.0: Setting to D3hot
<6>[ 11.568018] pci 0000:00:0b.0: Setting to D3hot
<6>[ 11.580033] pci 0000:00:14.2: enabling device (0000 -> 0002)
<3>[ 11.612820] int3472-tps68470 i2c-INT3472:0d: TPS68470 init error -121
<3>[ 11.624947] int3472-tps68470 i2c-INT3472:0d: probe with driver int3472-tps68470 failed with error -121
<4>[ 11.697527] resource: resource sanity check: requesting [mem 0x00000000fedc0000-0x00000000fedcffff], which spans more than pnp 00:04 [mem 0xfedc0000-0xfedc7fff]
<4>[ 11.697544] caller igen6_probe+0x196/0x940 [igen6_edac] mapping multiple BARs
<6>[ 11.699054] ACPI: bus type thunderbolt registered
<4>[ 11.711527] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform
<6>[ 11.712483] intel_pmc_core INT33A1:00: initialized
<6>[ 11.715459] EDAC MC0: Giving out device to module igen6_edac controller Intel_client_SoC MC#0: DEV 0000:00:00.0 (INTERRUPT)
<6>[ 11.722916] e1000e: Intel(R) PRO/1000 Network Driver
<6>[ 11.722920] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<6>[ 11.726550] EDAC MC1: Giving out device to module igen6_edac controller Intel_client_SoC MC#1: DEV 0000:00:00.0 (INTERRUPT)
<6>[ 11.726556] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
<7>[ 11.726697] EDAC igen6 MC1: HANDLING IBECC MEMORY ERROR
<7>[ 11.726703] EDAC igen6 MC1: ADDR 0x7fffffffe0
<7>[ 11.726706] EDAC igen6 MC0: HANDLING IBECC MEMORY ERROR
<7>[ 11.726708] EDAC igen6 MC0: ADDR 0x7fffffffe0
<6>[ 11.728976] EDAC igen6: v2.5.1
<6>[ 11.734746] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002)
<6>[ 11.737642] idma64 idma64.0: Found Intel integrated DMA 64-bit
<6>[ 11.743639] idma64 idma64.1: Found Intel integrated DMA 64-bit
<5>[ 11.751839] audit: type=1400 audit(1742593304.592:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=567 comm="apparmor_parser"
<5>[ 11.752028] audit: type=1400 audit(1742593304.592:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=568 comm="apparmor_parser"
<5>[ 11.752226] audit: type=1400 audit(1742593304.592:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=569 comm="apparmor_parser"
<5>[ 11.752482] audit: type=1400 audit(1742593304.592:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=566 comm="apparmor_parser"
<5>[ 11.752743] audit: type=1400 audit(1742593304.592:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=570 comm="apparmor_parser"
<5>[ 11.754025] audit: type=1400 audit(1742593304.594:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=571 comm="apparmor_parser"
<5>[ 11.759307] audit: type=1400 audit(1742593304.599:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=572 comm="apparmor_parser"
<5>[ 11.760722] audit: type=1400 audit(1742593304.600:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=573 comm="apparmor_parser"
<6>[ 11.762312] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_37xx_v0.0.bin, version: 20230726*MTL_CLIENT_SILICON-release*2101*ci_tag_mtl_pv_vpu_rc_20230726_2101*648a666b8b9
<6>[ 11.762318] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS
<5>[ 11.763483] audit: type=1400 audit(1742593304.603:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=574 comm="apparmor_parser"
<5>[ 11.766114] audit: type=1400 audit(1742593304.606:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=575 comm="apparmor_parser"
<6>[ 11.782454] idma64 idma64.2: Found Intel integrated DMA 64-bit
<6>[ 11.804218] i801_smbus 0000:00:1f.4: SPD Write Disable is set
<6>[ 11.804329] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
<6>[ 11.818162] idma64 idma64.3: Found Intel integrated DMA 64-bit
<6>[ 11.928487] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0
<6>[ 11.954627] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
<6>[ 12.035044] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88
<6>[ 12.035052] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
<6>[ 12.035158] e1000e 0000:00:1f.6 eth0: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF
<6>[ 12.155902] intel_rapl_msr: PL4 support detected.
<6>[ 12.170391] intel_rapl_common: Found RAPL domain package
<6>[ 12.170398] intel_rapl_common: Found RAPL domain core
<6>[ 12.170400] intel_rapl_common: Found RAPL domain uncore
<6>[ 12.170404] intel_rapl_common: Found RAPL domain psys
<6>[ 12.333610] i2c i2c-6: Successfully instantiated SPD at 0x54
<6>[ 12.334498] i2c i2c-6: Successfully instantiated SPD at 0x56
<6>[ 12.345571] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
<6>[ 12.345575] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
<6>[ 12.345577] RAPL PMU: hw unit of domain package 2^-14 Joules
<6>[ 12.345579] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
<6>[ 12.345580] RAPL PMU: hw unit of domain psys 2^-14 Joules
<6>[ 12.346152] usbcore: registered new device driver r8152-cfgselector
<4>[ 12.351063] spi-nor spi0.0: supply vcc not found, using dummy regulator
<6>[ 12.351506] cryptd: max_cpu_qlen set to 1000
<6>[ 12.356996] proc_thermal_pci 0000:00:04.0: enabling device (0000 -> 0002)
<6>[ 12.357904] e1000e 0000:00:1f.6 eno0: renamed from eth0
<6>[ 12.361515] AES CTR mode by8 optimization enabled
<6>[ 12.365696] intel_rapl_common: Found RAPL domain package
<6>[ 12.376205] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<5>[ 12.379688] Creating 1 MTD partitions on "0000:00:1f.5":
<5>[ 12.379730] 0x000000000000-0x000002000000 : "BIOS"
<6>[ 12.391641] hid: raw HID events driver (C) Jiri Kosina
<6>[ 12.397559] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
<6>[ 12.462017] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 12.463711] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 12.465233] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 12.466580] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 12.469160] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 12.469639] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 12.480809] r8152-cfgselector 4-1: reset SuperSpeed USB device number 2 using xhci_hcd
<6>[ 12.481229] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 12.484805] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 12.488103] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 12.492120] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 12.495637] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 12.498976] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<4>[ 12.636299] block nvme0n1: No UUID available providing old NGUID
<6>[ 12.711986] r8152 4-1:1.0 eth0: v1.12.13
<6>[ 12.712213] usbcore: registered new interface driver r8152
<6>[ 12.722880] usbcore: registered new interface driver cdc_ether
<6>[ 12.726189] usbcore: registered new interface driver r8153_ecm
<6>[ 12.781115] r8152 4-1:1.0 enxe2015072f33f: renamed from eth0
<6>[ 12.993760] loop0: detected capacity change from 0 to 8
<6>[ 13.206107] Consider using thermal netlink events interface
<6>[ 15.550368] r8152 4-1:1.0 enxe2015072f33f: carrier on
<7>[ 20.851693] systemd-journald[308]: /var/log/journal/43eddede42f94c1fb09402fe12a9ae82/user-1000.journal: Journal file uses a different sequence number ID, rotating.
<4>[ 23.189538] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component
<3>[ 25.655262] ucsi_acpi USBC000:00: error -ETIMEDOUT: PPM init failed
<7>[ 47.453219] [IGT] i915_module_load: executing
<7>[ 47.488598] [IGT] i915_module_load: starting subtest load
<4>[ 47.958682] **********************************************************
<4>[ 47.958684] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 47.958685] ** **
<4>[ 47.958686] ** trace_printk() being used. Allocating extra memory. **
<4>[ 47.958686] ** **
<4>[ 47.958687] ** This means that this is a DEBUG kernel and it is **
<4>[ 47.958688] ** unsafe for production use. **
<4>[ 47.958689] ** **
<4>[ 47.958690] ** If you see this message and you are not debugging **
<4>[ 47.958690] ** the kernel, report this immediately to your vendor! **
<4>[ 47.958691] ** **
<4>[ 47.958692] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 47.958693] **********************************************************
<5>[ 47.988562] Setting dangerous option force_probe - tainting kernel
<6>[ 47.992563] i915 0000:00:02.0: [drm] Found meteorlake (device ID 7d55) integrated display version 14.00 stepping C0
<7>[ 47.993632] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K
<7>[ 47.993851] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:no slpc:yes)
<7>[ 47.993993] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)
<7>[ 47.994162] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT
<7>[ 47.994295] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT1: Setting up Standalone Media GT
<7>[ 47.994416] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K
<7>[ 47.994586] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT1: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes)
<7>[ 47.994806] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing
<7>[ 47.994947] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 38400 kHz
<7>[ 47.995252] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vdbox enable: 0000, instances: 0000
<7>[ 47.995355] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vebox enable: 0000, instances: 0000
<7>[ 47.995754] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vdbox enable: 0005, instances: 0005
<7>[ 47.995878] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vebox enable: 0001, instances: 0001
<7>[ 47.996272] i915 0000:00:02.0: [drm:ggtt_probe_common [i915]] Using direct GSM access
<7>[ 47.996489] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M
<7>[ 47.996587] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 0M
<7>[ 47.996678] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M
<6>[ 47.996769] i915 0000:00:02.0: [drm] VT-d active for gfx access
<6>[ 47.997083] i915 0000:00:02.0: vgaarb: deactivate vga console
<6>[ 47.997408] i915 0000:00:02.0: [drm] Using Transparent Hugepages
<7>[ 47.997416] i915 0000:00:02.0: [drm:i915_gem_stolen_lmem_setup [i915]] Using direct DSM access
<7>[ 47.997555] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000078400947
<7>[ 47.998140] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 131072K, usable: 126976K
<7>[ 47.998353] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 31514 MiB [mem 0x00000000-0x7b1a86fff], io: n/a
<7>[ 47.998449] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(6): stolen-local: 124 MiB [mem 0x00800000-0x083fffff], io: 124 MiB [mem 0x70800000-0x783fffff]
<7>[ 47.998727] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x63e09018
<7>[ 47.998905] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 3.0.0
<7>[ 47.999033] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported
<7>[ 47.999157] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported
<7>[ 47.999279] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported
<7>[ 47.999403] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Mailbox #2 for backlight present
<7>[ 47.999540] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA)
<7>[ 47.999664] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num qgv points 4
<7>[ 47.999761] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 8
<7>[ 47.999873] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Watermark level 0 adjustment needed: yes
<7>[ 47.999973] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=3200 tRP=64 tRDPRE=40 tRAS=136 tRCD=64 tRC=200
<7>[ 48.000119] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=6000 tRP=112 tRDPRE=80 tRAS=0 tRCD=112 tRC=112
<7>[ 48.000261] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=16 tRCD=120 tRC=136
<7>[ 48.000397] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 3: DCLK=5600 tRP=104 tRDPRE=80 tRAS=240 tRCD=104 tRC=344
<7>[ 48.000529] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 0: num_planes=0 deratedbw=28913 peakbw: 51200
<7>[ 48.000677] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000
<7>[ 48.000813] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 48.000933] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600
<7>[ 48.001051] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 0: num_planes=0 deratedbw=35532 peakbw: 51200
<7>[ 48.001170] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000
<7>[ 48.001291] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 48.001411] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600
<7>[ 48.001531] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200
<7>[ 48.001651] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000
<7>[ 48.001772] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 48.001913] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600
<7>[ 48.002034] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200
<7>[ 48.002153] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000
<7>[ 48.002274] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 48.002394] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600
<7>[ 48.002513] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200
<7>[ 48.002631] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000
<7>[ 48.002751] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 48.002899] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600
<7>[ 48.003019] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200
<7>[ 48.003138] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000
<7>[ 48.003258] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 48.003377] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600
<7>[ 48.004192] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz
<7>[ 48.004326] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT METEORLAKE ", BDB version 253
<7>[ 48.004450] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7)
<7>[ 48.004573] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5)
<7>[ 48.004691] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100)
<7>[ 48.004822] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)
<7>[ 48.004945] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 848)
<7>[ 48.005065] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34)
<7>[ 48.005181] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers
<7>[ 48.005307] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)
<7>[ 48.005431] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366)
<7>[ 48.005552] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305)
<7>[ 48.005673] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 98, min size 136)
<7>[ 48.005805] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822)
<7>[ 48.005931] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210)
<7>[ 48.006049] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7>[ 48.006167] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2
<7>[ 48.006284] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806
<7>[ 48.006407] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6
<7>[ 48.006529] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6
<7>[ 48.006652] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2
<7>[ 48.006771] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6
<7>[ 48.006910] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6
<7>[ 48.007032] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping
<7>[ 48.007151] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[ 48.007269] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[ 48.007387] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 48.007506] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[ 48.007625] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 48.007743] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 48.007878] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a
<7>[ 48.008027] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7>[ 48.008213] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7>[ 48.008382] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 48.008579] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf
<7>[ 48.008808] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.
<7>[ 48.008962] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7>[ 48.009088] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7>[ 48.009217] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7>[ 48.009391] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<6>[ 48.009526] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
<7>[ 48.009542] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A
<7>[ 48.009685] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B
<7>[ 48.009827] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C
<7>[ 48.009959] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D
<7>[ 48.010187] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/mtl_dmc.bin
<7>[ 48.011600] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1
<7>[ 48.012470] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us
<7>[ 48.012614] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 7 (7.0 usec)
<7>[ 48.012744] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 91 (91.0 usec)
<7>[ 48.012887] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 92 (92.0 usec)
<7>[ 48.013013] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 107 (107.0 usec)
<7>[ 48.013135] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 108 (108.0 usec)
<7>[ 48.013258] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 161 (161.0 usec)
<7>[ 48.016158] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:
<7>[ 48.016495] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x86fc0
<7>[ 48.016670] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7>[ 48.016962] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f004 = 0x42c0408 (EVT_HTP)
<7>[ 48.017111] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)
<7>[ 48.017315] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x8f008 = 0x534052f4 (EVT_HTP)
<7>[ 48.017550] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 1:
<7>[ 48.017710] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f074 = 0x96fc0
<7>[ 48.017891] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)
<7>[ 48.018087] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f004 = 0x212c20f4 (EVT_HTP)
<7>[ 48.018086] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 4 display pipes available.
<7>[ 48.018273] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)
<7>[ 48.018481] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f008 = 0x222021e8 (EVT_HTP)
<7>[ 48.018651] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)
<7>[ 48.018827] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f00c = 0x23f422dc (EVT_HTP)
<7>[ 48.019049] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 48.019246] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f010 = 0x26ec26c0 (EVT_HTP)
<7>[ 48.019422] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 2:
<7>[ 48.019593] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f474 = 0x9efc0
<7>[ 48.019773] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)
<7>[ 48.019992] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f404 = 0xa618a5e0 (EVT_HTP)
<7>[ 48.020155] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)
<7>[ 48.020323] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f408 = 0xa70ca6d4 (EVT_HTP)
<7>[ 48.020491] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)
<7>[ 48.020660] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f40c = 0xa8e0a7c8 (EVT_HTP)
<7>[ 48.020838] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 48.021001] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f410 = 0xabd8abac (EVT_HTP)
<7>[ 48.021177] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 3:
<7>[ 48.021348] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f874 = 0x53fc0
<7>[ 48.021526] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)
<7>[ 48.021703] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f80c = 0x24a02388 (EVT_HTP)
<7>[ 48.021745] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 48.021896] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 48.021987] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz
<7>[ 48.022085] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f810 = 0x2798276c (EVT_HTP)
<7>[ 48.022183] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 1305600 kHz
<7>[ 48.022290] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 4:
<7>[ 48.022408] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:240:DDI A/PHY A] Using AUX CH A (VBT)
<7>[ 48.022477] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5fc74 = 0x5afc0
<7>[ 48.022638] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:240:DDI A/PHY A]
<7>[ 48.022674] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)
<7>[ 48.022893] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5fc0c = 0x94a09388 (EVT_HTP)
<7>[ 48.022926] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2
<7>[ 48.023097] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5fc40 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 48.023143] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2
<7>[ 48.023304] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5fc10 = 0x9798976c (EVT_HTP)
<7>[ 48.023358] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless
<7>[ 48.023565] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7>[ 48.023713] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300
<7>[ 48.023890] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002
<7>[ 48.024043] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName
<7>[ 48.024186] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz
<7>[ 48.024323] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7>[ 48.024496] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:240:DDI A/PHY A] initial power sequencer: PPS 0
<7>[ 48.024857] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 48.025009] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 48.025156] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 48.025297] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 48.025436] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200
<7>[ 48.025959] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 48.026584] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A
<7>[ 48.028071] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 turning VDD on
<6>[ 48.032447] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/mtl_dmc.bin (v2.23)
<7>[ 48.032344] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7>[ 48.034993] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 00 c4 41 00 00 01 c0 02 00 00 00 00 0b 80
<7>[ 48.035773] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
<7>[ 48.036966] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 04 83 85 04 00
<7>[ 48.038990] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 3
<7>[ 48.039760] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] PSR2 supported
<7>[ 48.041528] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 48.048395] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7>[ 48.048406] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] ELD monitor
<7>[ 48.048412] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] ELD size 20, SAD count 0
<7>[ 48.048461] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:241:eDP-1] using preferred EDID fixed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7>[ 48.049235] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:241:eDP-1] Performing OUI wait (0 ms)
<7>[ 48.049983] i915 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [i915]] [CONNECTOR:241:eDP-1] Detected unsupported HDR backlight interface version 0
<7>[ 48.050154] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:241:eDP-1] DRRS type: none
<7>[ 48.050394] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:241:eDP-1] Using native PCH PWM for backlight control (controller=0)
<7>[ 48.050583] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:241:eDP-1] backlight initialized, enabled, brightness 192000/192000
<7>[ 48.050763] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 48.050913] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 48.051058] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 48.051196] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 48.051326] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200
<7>[ 48.051588] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 48.051874] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:249:DDI B/PHY B] Using AUX CH B (VBT)
<7>[ 48.052028] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:249:DDI B/PHY B]
<7>[ 48.052436] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:249:DDI B/PHY B]
<7>[ 48.052628] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:249:DDI B/PHY B] Using DDC pin 0x2 (VBT)
<7>[ 48.053246] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:267:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)
<7>[ 48.053498] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected)
<7>[ 48.053728] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:267:DDI TC1/PHY TC1]
<7>[ 48.054032] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:276:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)
<7>[ 48.054256] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected)
<7>[ 48.054518] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy)
<7>[ 48.054664] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:276:DDI TC2/PHY TC2]
<7>[ 48.054811] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:276:DDI TC2/PHY TC2] Using DDC pin 0xa (VBT)
<7>[ 48.055049] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:280:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)
<7>[ 48.055252] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port F/TC#3: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected)
<7>[ 48.055456] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:280:DDI TC3/PHY TC3]
<7>[ 48.055711] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:289:DDI TC4/PHY TC4] Using AUX CH USBC4 (VBT)
<7>[ 48.055917] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port G/TC#4: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected)
<7>[ 48.056122] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:289:DDI TC4/PHY TC4]
<7>[ 48.056821] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe A] hw state readout: enabled
<7>[ 48.057085] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:134:pipe B] hw state readout: disabled
<7>[ 48.057346] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:186:pipe C] hw state readout: disabled
<7>[ 48.057588] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:238:pipe D] hw state readout: disabled
<7>[ 48.057720] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:32:plane 1A] hw state readout: enabled, pipe A
<7>[ 48.057857] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:41:plane 2A] hw state readout: disabled, pipe A
<7>[ 48.057991] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:50:plane 3A] hw state readout: disabled, pipe A
<7>[ 48.058129] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 4A] hw state readout: disabled, pipe A
<7>[ 48.058264] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 5A] hw state readout: disabled, pipe A
<7>[ 48.058393] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor A] hw state readout: disabled, pipe A
<7>[ 48.058518] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1B] hw state readout: disabled, pipe B
<7>[ 48.058646] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2B] hw state readout: disabled, pipe B
<7>[ 48.058774] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:plane 3B] hw state readout: disabled, pipe B
<7>[ 48.058911] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:111:plane 4B] hw state readout: disabled, pipe B
<7>[ 48.059051] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:120:plane 5B] hw state readout: disabled, pipe B
<7>[ 48.059193] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:129:cursor B] hw state readout: disabled, pipe B
<7>[ 48.059325] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:136:plane 1C] hw state readout: disabled, pipe C
<7>[ 48.059450] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:145:plane 2C] hw state readout: disabled, pipe C
<7>[ 48.059574] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:154:plane 3C] hw state readout: disabled, pipe C
<7>[ 48.059698] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:163:plane 4C] hw state readout: disabled, pipe C
<7>[ 48.059830] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:172:plane 5C] hw state readout: disabled, pipe C
<7>[ 48.059954] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:181:cursor C] hw state readout: disabled, pipe C
<7>[ 48.060085] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:188:plane 1D] hw state readout: disabled, pipe D
<7>[ 48.060218] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:197:plane 2D] hw state readout: disabled, pipe D
<7>[ 48.060353] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:206:plane 3D] hw state readout: disabled, pipe D
<7>[ 48.060480] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:215:plane 4D] hw state readout: disabled, pipe D
<7>[ 48.060602] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:224:plane 5D] hw state readout: disabled, pipe D
<7>[ 48.060726] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:233:cursor D] hw state readout: disabled, pipe D
<7>[ 48.061479] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
<7>[ 48.061650] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:240:DDI A/PHY A] hw state readout: enabled, pipe A
<7>[ 48.061789] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:249:DDI B/PHY B] hw state readout: disabled, pipe A
<7>[ 48.061910] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:251:DP-MST A] hw state readout: disabled, pipe A
<7>[ 48.062035] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:252:DP-MST B] hw state readout: disabled, pipe B
<7>[ 48.062163] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:253:DP-MST C] hw state readout: disabled, pipe C
<7>[ 48.062289] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:254:DP-MST D] hw state readout: disabled, pipe D
<7>[ 48.062476] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected)
<7>[ 48.062601] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:267:DDI TC1/PHY TC1] hw state readout: disabled, pipe A
<7>[ 48.062717] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:269:DP-MST A] hw state readout: disabled, pipe A
<7>[ 48.062844] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:270:DP-MST B] hw state readout: disabled, pipe B
<7>[ 48.062962] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:271:DP-MST C] hw state readout: disabled, pipe C
<7>[ 48.063089] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:272:DP-MST D] hw state readout: disabled, pipe D
<7>[ 48.063258] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected)
<7>[ 48.063382] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:276:DDI TC2/PHY TC2] hw state readout: disabled, pipe A
<7>[ 48.063509] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port F/TC#3: sanitize mode (disconnected)
<7>[ 48.063629] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:280:DDI TC3/PHY TC3] hw state readout: disabled, pipe A
<7>[ 48.063746] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:282:DP-MST A] hw state readout: disabled, pipe A
<7>[ 48.063870] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:283:DP-MST B] hw state readout: disabled, pipe B
<7>[ 48.063991] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:284:DP-MST C] hw state readout: disabled, pipe C
<7>[ 48.064116] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:285:DP-MST D] hw state readout: disabled, pipe D
<7>[ 48.064252] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port G/TC#4: sanitize mode (disconnected)
<7>[ 48.064379] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:289:DDI TC4/PHY TC4] hw state readout: disabled, pipe A
<7>[ 48.064502] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:291:DP-MST A] hw state readout: disabled, pipe A
<7>[ 48.064619] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:292:DP-MST B] hw state readout: disabled, pipe B
<7>[ 48.064734] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:293:DP-MST C] hw state readout: disabled, pipe C
<7>[ 48.064855] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:294:DP-MST D] hw state readout: disabled, pipe D
<7>[ 48.065068] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:241:eDP-1] hw state readout: enabled
<7>[ 48.065206] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:250:DP-1] hw state readout: disabled
<7>[ 48.065342] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:262:HDMI-A-1] hw state readout: disabled
<7>[ 48.065472] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:268:DP-2] hw state readout: disabled
<7>[ 48.065608] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:277:HDMI-A-2] hw state readout: disabled
<7>[ 48.065736] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:281:DP-3] hw state readout: disabled
<7>[ 48.065872] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:290:DP-4] hw state readout: disabled
<7>[ 48.066065] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:32:plane 1A] min_cdclk 256910 kHz
<7>[ 48.066193] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:41:plane 2A] min_cdclk 0 kHz
<7>[ 48.066316] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:50:plane 3A] min_cdclk 0 kHz
<7>[ 48.066432] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 4A] min_cdclk 0 kHz
<7>[ 48.066547] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 5A] min_cdclk 0 kHz
<7>[ 48.066661] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor A] min_cdclk 0 kHz
<7>[ 48.066775] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1B] min_cdclk 0 kHz
<7>[ 48.066903] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2B] min_cdclk 0 kHz
<7>[ 48.067025] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:plane 3B] min_cdclk 0 kHz
<7>[ 48.067152] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:111:plane 4B] min_cdclk 0 kHz
<7>[ 48.067279] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:120:plane 5B] min_cdclk 0 kHz
<7>[ 48.067396] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:129:cursor B] min_cdclk 0 kHz
<7>[ 48.067511] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:136:plane 1C] min_cdclk 0 kHz
<7>[ 48.067626] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:145:plane 2C] min_cdclk 0 kHz
<7>[ 48.067741] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:154:plane 3C] min_cdclk 0 kHz
<7>[ 48.067861] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:163:plane 4C] min_cdclk 0 kHz
<7>[ 48.067975] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:172:plane 5C] min_cdclk 0 kHz
<7>[ 48.068089] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:181:cursor C] min_cdclk 0 kHz
<7>[ 48.068210] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:188:plane 1D] min_cdclk 0 kHz
<7>[ 48.068337] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:197:plane 2D] min_cdclk 0 kHz
<7>[ 48.068458] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:206:plane 3D] min_cdclk 0 kHz
<7>[ 48.068572] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:215:plane 4D] min_cdclk 0 kHz
<7>[ 48.068686] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:224:plane 5D] min_cdclk 0 kHz
<7>[ 48.068804] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:233:cursor D] min_cdclk 0 kHz
<7>[ 48.069119] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:82:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no
<7>[ 48.069243] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:134:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 48.069364] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:186:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 48.069485] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:238:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 48.069604] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe A data rate 2055280 num active planes 1
<7>[ 48.069741] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe B data rate 0 num active planes 0
<7>[ 48.069887] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe C data rate 0 num active planes 0
<7>[ 48.070013] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe D data rate 0 num active planes 0
<7>[ 48.070207] i915 0000:00:02.0: [drm:intel_cmtg_sanitize [i915]] CMTG readout: CMTG A: enabled, CMTG B: n/a, Transcoder A secondary: yes, Transcoder B secondary: no
<7>[ 48.070477] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe A] enable: yes [setup_hw_state]
<7>[ 48.070610] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 48.070736] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
<7>[ 48.070872] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>
<7>[ 48.070997] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 48.071130] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0
<7>[ 48.071260] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0
<7>[ 48.071393] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 623587, link_n: 524288, tu: 64
<7>[ 48.071512] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 48.071634] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled
<7>[ 48.071754] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled
<7>[ 48.071884] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7>[ 48.072005] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0
<7>[ 48.072126] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7>[ 48.072249] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1
<7>[ 48.072373] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0
<7>[ 48.072492] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0
<7>[ 48.072614] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0
<7>[ 48.072738] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa
<7>[ 48.072866] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa
<7>[ 48.072989] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa
<7>[ 48.073118] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa
<7>[ 48.073247] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa
<7>[ 48.073369] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 513820
<7>[ 48.073488] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0
<7>[ 48.073606] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 48.073725] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 48.073854] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0
<7>[ 48.073976] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7>[ 48.074104] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0
<7>[ 48.074232] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 48.074358] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 48.074481] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 48.074600] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 48.074721] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 48.074851] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 48.074969] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 48.075090] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 48.075208] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 48.075326] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 48.075444] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 48.075564] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:134:pipe B] enable: no [setup_hw_state]
<7>[ 48.075682] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:186:pipe C] enable: no [setup_hw_state]
<7>[ 48.075809] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:238:pipe D] enable: no [setup_hw_state]
<7>[ 48.076102] i915 0000:00:02.0: [drm:skl_get_initial_plane_config [i915]] [CRTC:82:pipe A][PLANE:32:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800
<7>[ 48.076248] i915 0000:00:02.0: [drm:initial_plane_vma [i915]] Using dma_addr=0x0000000000800000, based on initial plane programming
<7>[ 48.076399] i915 0000:00:02.0: [drm:_i915_gem_object_stolen_init [i915]] creating preallocated stolen object: stolen_offset=0x0000000000000000, size=0x00000000013c7000
<7>[ 48.076864] i915 0000:00:02.0: [drm:initial_plane_vma [i915]] Initial plane fb bound to 0x0 in the ggtt (original 0xfec00000)
<7>[ 48.082140] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [2048K, 832K)
<7>[ 48.089246] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [1040K, 832K)
<7>[ 48.089372] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [13c7000, fee00000]
<7>[ 48.089479] i915 0000:00:02.0: [drm:nop_init_clock_gating [i915]] No clock gating settings or workarounds applied.
<7>[ 48.089582] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: L3BANK steering: group=0x0, instance=0x0
<7>[ 48.089701] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: DSS steering: group=0x0, instance=0x0
<7>[ 48.089824] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: INSTANCE 0 steering: group=0x0, instance=0x0
<7>[ 48.089942] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global
<7>[ 48.092450] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 7 engine workarounds on rcs'0
<7>[ 48.092577] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 whitelist workarounds on rcs'0
<7>[ 48.092696] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 7 context workarounds on rcs'0
<7>[ 48.093457] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 engine workarounds on bcs'0
<7>[ 48.093577] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 context workarounds on bcs'0
<7>[ 48.093919] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 engine workarounds on ccs'0
<7>[ 48.094030] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 context workarounds on ccs'0
<7>[ 48.096505] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)
<7>[ 48.096655] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 24 ext-regs.
<7>[ 48.096809] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset
<7>[ 48.115330] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0x13c804f
<7>[ 48.115491] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x410000
<7>[ 48.115617] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4
<7>[ 48.115738] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3
<7>[ 48.115870] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x2f92
<7>[ 48.115986] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x7d550008
<7>[ 48.116100] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0
<7>[ 48.116214] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0
<7>[ 48.116326] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0
<7>[ 48.116439] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0
<7>[ 48.116551] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0
<7>[ 48.116663] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0
<7>[ 48.116773] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0
<7>[ 48.116898] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0
<6>[ 48.117735] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/mtl_guc_70.bin version 70.36.0
<7>[ 48.129868] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 10ms, freq = 1500MHz -> 1550MHz vs 2250MHz, status = 0x8002F034, count = 0, ret = 0
<7>[ 48.130830] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<6>[ 48.132277] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled
<6>[ 48.132281] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled
<6>[ 48.132712] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled
<7>[ 48.132995] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT0: GUC: Querying HW config table: size = 0, offset = 0x00000000
<7>[ 48.133922] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT0: GUC: Querying HW config table: size = 752, offset = 0x01FFC000
<7>[ 48.142061] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: OADDRM steering: group=0x0, instance=0x0
<7>[ 48.142200] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 5 GT workarounds on global
<7>[ 48.143193] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'0
<7>[ 48.143318] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'0
<7>[ 48.143859] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'2
<7>[ 48.143971] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'2
<7>[ 48.144719] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vecs'0
<7>[ 48.144842] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vecs'0
<7>[ 48.145347] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on other'6
<7>[ 48.145454] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on other'6
<7>[ 48.148805] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT1: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)
<7>[ 48.148955] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT1: GUC: capture found 24 ext-regs.
<7>[ 48.149095] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT1: GUC: Used 4 KB for temporary ADS regset
<7>[ 48.168812] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 0] = 0x1ffd04f
<7>[ 48.168946] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 1] = 0x400000
<7>[ 48.169069] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 2] = 0x4
<7>[ 48.169187] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 3] = 0x3
<7>[ 48.169303] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 4] = 0x47fc
<7>[ 48.169416] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 5] = 0x7d550008
<7>[ 48.169528] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 6] = 0x0
<7>[ 48.169642] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 7] = 0x0
<7>[ 48.169754] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 8] = 0x0
<7>[ 48.169884] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 9] = 0x0
<7>[ 48.169998] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[10] = 0x0
<7>[ 48.170113] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[11] = 0x0
<7>[ 48.170227] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[12] = 0x0
<7>[ 48.170342] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[13] = 0x0
<7>[ 48.170455] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT1: HuC: loaded by GSC = no
<7>[ 48.172545] i915 0000:00:02.0: [drm:i915_gsc_proxy_component_bind [i915]] GT1: GSC proxy mei component bound
<6>[ 48.172683] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops i915_gsc_proxy_component_ops [i915])
<6>[ 48.173173] i915 0000:00:02.0: [drm] GT1: GuC firmware i915/mtl_guc_70.bin version 70.36.0
<6>[ 48.173178] i915 0000:00:02.0: [drm] GT1: HuC firmware i915/mtl_huc_gsc.bin version 8.5.4
<7>[ 48.186857] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT1: GUC: init took 12ms, freq = 1100MHz -> 1300MHz vs 1300MHz, status = 0x8002F034, count = 0, ret = 0
<7>[ 48.187223] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled
<7>[ 48.195850] i915 0000:00:02.0: [drm:intel_huc_wait_for_auth_complete [i915]] GT1: HuC: auth took 8ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x0000C1DC, count = 0, ret = 0
<6>[ 48.196078] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for clear media
<6>[ 48.197092] i915 0000:00:02.0: [drm] GT1: GUC: submission enabled
<6>[ 48.197096] i915 0000:00:02.0: [drm] GT1: GUC: SLPC enabled
<6>[ 48.197320] i915 0000:00:02.0: [drm] GT1: GUC: RC enabled
<7>[ 48.197588] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT1: GUC: Querying HW config table: size = 0, offset = 0x00000000
<7>[ 48.198498] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT1: GUC: Querying HW config table: size = 752, offset = 0xFEDD1000
<7>[ 48.208713] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0
<7>[ 48.209138] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0
<7>[ 48.209512] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0
<7>[ 48.209812] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'2 to vcs1
<7>[ 48.210076] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0
<7>[ 48.210344] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed ccs'0 to ccs0
<7>[ 48.210612] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed other'6 to other0
<6>[ 48.213805] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized
<7>[ 48.215891] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[ 48.216078] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[ 48.216282] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[ 48.216419] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[ 48.216570] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] ddb ( 0 - 2048) -> ( 0 - 4001), size 2048 -> 4001
<7>[ 48.216699] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:77:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95
<7>[ 48.216849] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7>[ 48.216976] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] lines 2, 2, 2, 2, 2, 2, 0, 0, 1, 3, 1 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7>[ 48.217103] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] blocks 49, 49, 49, 49, 49, 49, 0, 0, 7, 73, 7 -> 49, 385, 385, 457, 457, 673, 0, 0, 0, 73, 0
<7>[ 48.217229] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 0, 82, 0
<7>[ 48.217358] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7>[ 48.217504] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7>[ 48.217644] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7>[ 48.217781] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7>[ 48.217929] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7>[ 48.218067] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (40143 kHz) > old min cdclk (0 kHz)
<7>[ 48.219662] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0xffff0072 0x1341b072)
<7>[ 48.219832] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:240:DDI A/PHY A]
<7>[ 48.219972] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DDI B/PHY B]
<7>[ 48.220107] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:251:DP-MST A]
<7>[ 48.220247] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:252:DP-MST B]
<7>[ 48.220374] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:253:DP-MST C]
<7>[ 48.220501] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:254:DP-MST D]
<7>[ 48.220628] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DDI TC1/PHY TC1]
<7>[ 48.220756] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:269:DP-MST A]
<7>[ 48.220899] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:270:DP-MST B]
<7>[ 48.221024] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DP-MST C]
<7>[ 48.221148] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:272:DP-MST D]
<7>[ 48.221282] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:276:DDI TC2/PHY TC2]
<7>[ 48.221413] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DDI TC3/PHY TC3]
<7>[ 48.221538] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:282:DP-MST A]
<7>[ 48.221661] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:283:DP-MST B]
<7>[ 48.221787] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DP-MST C]
<7>[ 48.221909] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:285:DP-MST D]
<7>[ 48.222031] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DDI TC4/PHY TC4]
<7>[ 48.222155] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:291:DP-MST A]
<7>[ 48.222280] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:292:DP-MST B]
<7>[ 48.222403] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:293:DP-MST C]
<7>[ 48.222525] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:294:DP-MST D]
<7>[ 48.222847] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 42393600 bytes of contiguous stolen space for FBC, limit: 1
<7>[ 48.222988] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:32:plane 1A]
<7>[ 48.223164] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: no -> yes (pipe: A)
<7>[ 48.223310] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 4 (mbus joined: yes)
<7>[ 48.233323] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0x2000071 0x1341b072)
<7>[ 48.239519] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:241:eDP-1] adding connector to sysfs
<7>[ 48.241800] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:241:eDP-1] backlight device intel_backlight registered
<7>[ 48.242126] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
<7>[ 48.243536] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:241:eDP-1] generating connector hotplug event
<7>[ 48.243614] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:250:DP-1] adding connector to sysfs
<7>[ 48.243974] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1
<7>[ 48.244959] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:250:DP-1] generating connector hotplug event
<7>[ 48.244993] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:262:HDMI-A-1] adding connector to sysfs
<7>[ 48.245266] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:262:HDMI-A-1] generating connector hotplug event
<7>[ 48.245297] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:268:DP-2] adding connector to sysfs
<7>[ 48.245602] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2
<7>[ 48.246340] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:268:DP-2] generating connector hotplug event
<7>[ 48.246369] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:277:HDMI-A-2] adding connector to sysfs
<7>[ 48.246591] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:277:HDMI-A-2] generating connector hotplug event
<7>[ 48.246616] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:281:DP-3] adding connector to sysfs
<7>[ 48.246918] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3
<7>[ 48.247483] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:281:DP-3] generating connector hotplug event
<7>[ 48.247516] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:290:DP-4] adding connector to sysfs
<7>[ 48.247836] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY TC4 bus for card0-DP-4
<7>[ 48.248470] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:290:DP-4] generating connector hotplug event
<6>[ 48.248496] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0
<7>[ 48.250319] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected
<6>[ 48.259571] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6>[ 48.263736] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
<7>[ 48.264595] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7>[ 48.264744] i915 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [i915]] aud_ts_cdclk set to M=60, N=768
<7>[ 48.265699] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] found possible fb from [PLANE:32:plane 1A]
<7>[ 48.265858] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:134:pipe B] not active, skipping
<7>[ 48.265989] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:186:pipe C] not active, skipping
<7>[ 48.266159] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix
<7>[ 48.266115] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:238:pipe D] not active, skipping
<7>[ 48.266238] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] checking [PLANE:32:plane 1A] for BIOS fb
<7>[ 48.266366] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:82:pipe A] area: 2880x1800, bpp: 32, size: 20736000
<7>[ 48.266498] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] fb big enough [PLANE:32:plane 1A] (20738048 >= 20736000)
<7>[ 48.266624] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:134:pipe B] not active, skipping
<7>[ 48.266749] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:186:pipe C] not active, skipping
<7>[ 48.266930] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:238:pipe D] not active, skipping
<6>[ 48.266977] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])
<7>[ 48.267074] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] using BIOS fb for initial console
<7>[ 48.267591] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:250:DP-1]
<7>[ 48.267697] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010
<7>[ 48.267937] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7>[ 48.270130] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 48.272717] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:250:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 48.272997] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:262:HDMI-A-1]
<7>[ 48.273095] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9a01
<7>[ 48.273491] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL
<7>[ 48.273501] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled
<7>[ 48.277833] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:262:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 48.277967] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:268:DP-2]
<7>[ 48.278305] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 48.278494] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:268:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 48.278624] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:277:HDMI-A-2]
<7>[ 48.278921] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy)
<7>[ 48.283872] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:277:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 48.284009] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:281:DP-3]
<7>[ 48.284214] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 48.284391] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:281:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 48.284518] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:290:DP-4]
<7>[ 48.284742] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt)
<7>[ 48.284965] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:290:DP-4] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 48.285179] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[ 48.285284] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:241:eDP-1]
<7>[ 48.285357] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:241:eDP-1]
<7>[ 48.286864] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 48.287680] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 48.287885] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7>[ 48.288065] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7>[ 48.288374] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7>[ 48.288381] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] ELD monitor
<7>[ 48.288387] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] ELD size 20, SAD count 0
<7>[ 48.288417] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] VRR capable: no
<7>[ 48.288583] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 48.289604] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 48.289776] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 48.291711] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:241:eDP-1] status updated from unknown to connected
<7>[ 48.291969] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[ 48.292385] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:241:eDP-1] probed modes:
<7>[ 48.292402] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7>[ 48.292412] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:250:DP-1]
<7>[ 48.292422] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:250:DP-1]
<7>[ 48.296855] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:250:DP-1] disconnected
<7>[ 48.296870] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:262:HDMI-A-1]
<7>[ 48.296877] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:262:HDMI-A-1]
<7>[ 48.302211] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:262:HDMI-A-1] disconnected
<7>[ 48.302223] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:268:DP-2]
<7>[ 48.302232] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:268:DP-2]
<7>[ 48.302598] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:268:DP-2] disconnected
<7>[ 48.302609] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:277:HDMI-A-2]
<7>[ 48.302616] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:277:HDMI-A-2]
<7>[ 48.307876] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:277:HDMI-A-2] disconnected
<7>[ 48.307889] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:281:DP-3]
<7>[ 48.307896] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:281:DP-3]
<7>[ 48.308147] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:281:DP-3] disconnected
<7>[ 48.308156] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:290:DP-4]
<7>[ 48.308165] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:290:DP-4]
<7>[ 48.308402] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:290:DP-4] disconnected
<7>[ 48.308409] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:241:eDP-1] enabled? yes
<7>[ 48.308413] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:250:DP-1] enabled? no
<7>[ 48.308415] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:HDMI-A-1] enabled? no
<7>[ 48.308416] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:268:DP-2] enabled? no
<7>[ 48.308418] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:277:HDMI-A-2] enabled? no
<7>[ 48.308419] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:281:DP-3] enabled? no
<7>[ 48.308420] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:290:DP-4] enabled? no
<7>[ 48.308530] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 48.308550] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:241:eDP-1] found preferred mode: 2880x1800
<7>[ 48.308552] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7>[ 48.308561] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 48.308630] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<7>[ 48.308644] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] re-using BIOS fb
<7>[ 48.308865] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 2880x1800 fb: 0x00000000
<6>[ 48.310429] fbcon: i915drmfb (fb0) is primary device
<7>[ 48.311266] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:241:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7>[ 48.311440] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:240:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 max link_bpp 30.0000
<7>[ 48.311579] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 link rate required 1926825 available 2160000
<7>[ 48.311720] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7>[ 48.311890] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:240:DDI A/PHY A] [CRTC:82:pipe A]
<7>[ 48.312030] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 623587/524288, found tu 64, data 7483046/8388608 link 498869/524288)
<7>[ 48.312175] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10
<7>[ 48.312312] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:
<7>[ 48.312448] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] c10pll_hw_state: fracen: no,
<7>[ 48.312587] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] multiplier: 225, tx_clk_div: 1.
<7>[ 48.312716] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] c10pll_rawhw_state:
<7>[ 48.312845] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21
<7>[ 48.312966] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7>[ 48.313086] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 48.313205] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 48.313329] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 48.313459] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7>[ 48.313574] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:
<7>[ 48.313707] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] c10pll_hw_state: fracen: yes,
<7>[ 48.313833] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] quot: 40960, rem: 0, den: 1,
<7>[ 48.313952] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] multiplier: 140, tx_clk_div: 0.
<7>[ 48.314075] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] c10pll_rawhw_state:
<7>[ 48.314189] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21
<7>[ 48.314307] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7>[ 48.314264] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A
<7>[ 48.314423] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 48.314542] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 48.314519] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A
<7>[ 48.314660] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7>[ 48.314777] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7>[ 48.314745] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A
<7>[ 48.314900] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30)
<7>[ 48.314970] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A
<7>[ 48.315040] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in port_clock (expected 432000, found 540000)
<7>[ 48.315171] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7>[ 48.315188] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B
<7>[ 48.315362] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7>[ 48.315401] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B
<7>[ 48.315492] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7>[ 48.315618] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 0, 73, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7>[ 48.315611] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B
<7>[ 48.315744] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 0, 82, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7>[ 48.315826] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B
<7>[ 48.315874] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:41:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 48.315996] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:41:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 48.316035] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C
<7>[ 48.316117] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:41:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 48.316238] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:41:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 48.316242] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C
<7>[ 48.316358] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:50:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 48.316480] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:50:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 48.316450] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C
<7>[ 48.316597] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:50:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 48.316656] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C
<7>[ 48.316716] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:50:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 48.316841] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:59:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 48.316871] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D
<7>[ 48.316955] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:59:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 48.317076] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:59:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 48.317078] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D
<7>[ 48.317193] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:59:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 48.317309] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 48.317285] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D
<7>[ 48.317425] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 48.317491] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D
<7>[ 48.317542] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 48.317658] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 48.317696] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E
<7>[ 48.317772] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:77:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 48.317896] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:77:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 48.317903] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E
<7>[ 48.318011] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:77:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 48.318127] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:77:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 48.318106] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E
<7>[ 48.318291] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe A] enable: yes [modeset]
<7>[ 48.318309] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E
<7>[ 48.318432] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 48.318513] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F
<7>[ 48.318562] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7>[ 48.318687] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>
<7>[ 48.318716] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F
<7>[ 48.318815] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 48.318939] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0
<7>[ 48.318924] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F
<7>[ 48.319063] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0
<7>[ 48.319126] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F
<7>[ 48.319189] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64
<7>[ 48.319318] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 48.319330] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G
<7>[ 48.319445] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled
<7>[ 48.319566] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled
<7>[ 48.319532] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G
<7>[ 48.319685] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7>[ 48.319737] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G
<7>[ 48.319812] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0
<7>[ 48.319934] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7>[ 48.319948] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G
<7>[ 48.320057] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 4, length 14
<7>[ 48.320183] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB
<7>[ 48.320151] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H
<7>[ 48.320302] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB
<7>[ 48.320354] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H
<7>[ 48.320422] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0
<7>[ 48.320541] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range
<7>[ 48.320556] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H
<7>[ 48.320659] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined
<7>[ 48.320777] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1
<7>[ 48.320760] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H
<7>[ 48.320909] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0
<7>[ 48.320967] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I
<7>[ 48.321031] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0
<7>[ 48.321150] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0
<7>[ 48.321170] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I
<7>[ 48.321266] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7>[ 48.321385] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7>[ 48.321375] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I
<7>[ 48.321505] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa
<7>[ 48.321577] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I
<7>[ 48.321624] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa
<7>[ 48.321742] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa
<7>[ 48.321869] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820
<7>[ 48.321992] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0
<7>[ 48.322115] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 48.322249] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 48.322377] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0
<7>[ 48.322497] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000
<7>[ 48.322618] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7>[ 48.322740] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 48.322871] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 48.322995] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 48.323125] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 48.323247] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 48.323368] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 48.323490] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 48.323609] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 48.323735] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 48.323972] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 48.324104] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 48.324226] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:32:plane 1A] fb: [FB:299] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7>[ 48.324354] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7>[ 48.324491] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7>[ 48.324615] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:41:plane 2A] fb: [NOFB], visible: no
<7>[ 48.324743] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:50:plane 3A] fb: [NOFB], visible: no
<7>[ 48.324888] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:59:plane 4A] fb: [NOFB], visible: no
<7>[ 48.325028] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:68:plane 5A] fb: [NOFB], visible: no
<7>[ 48.325154] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:77:cursor A] fb: [NOFB], visible: no
<6>[ 48.325598] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
<6>[ 48.326625] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
<6>[ 48.326969] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
<6>[ 48.327242] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
<7>[ 48.333576] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]
<6>[ 48.357609] i915 0000:00:02.0: [drm] GT1: Loaded GSC firmware i915/mtl_gsc_1.bin (cv1.0, r102.1.15.1926, svn 1)
<7>[ 48.378107] i915 0000:00:02.0: [drm:intel_huc_wait_for_auth_complete [i915]] GT1: HuC: auth took 0ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x00116C68, count = 0, ret = 0
<6>[ 48.378295] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for all workloads
<7>[ 48.538863] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:241:eDP-1] set backlight PWM = 0
<7>[ 48.539852] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A
<7>[ 48.546638] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 turn panel power off
<7>[ 48.546989] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000
<7>[ 48.547195] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 wait for panel power off time
<7>[ 48.547557] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7>[ 48.547572] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:240:DDI A/PHY A] - short
<7>[ 48.599050] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7>[ 48.599668] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7>[ 48.599985] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A
<7>[ 48.600223] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:240:DDI A/PHY A] - long
<7>[ 48.600745] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10
<7>[ 48.601710] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:32:plane 1A]
<7>[ 48.601929] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:240:DDI A/PHY A]
<7>[ 48.602489] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0x2000071 0x13421c72)
<7>[ 48.602495] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:240:DDI A/PHY A]
<7>[ 48.602828] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:240:DDI A/PHY A]
<7>[ 48.603119] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DDI B/PHY B]
<7>[ 48.603396] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:251:DP-MST A]
<7>[ 48.603667] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:252:DP-MST B]
<7>[ 48.603832] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:253:DP-MST C]
<7>[ 48.603980] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:254:DP-MST D]
<7>[ 48.604127] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DDI TC1/PHY TC1]
<7>[ 48.604282] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:269:DP-MST A]
<7>[ 48.604420] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:270:DP-MST B]
<7>[ 48.604554] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DP-MST C]
<7>[ 48.604688] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:272:DP-MST D]
<7>[ 48.604828] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:276:DDI TC2/PHY TC2]
<7>[ 48.604972] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DDI TC3/PHY TC3]
<7>[ 48.605109] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:282:DP-MST A]
<7>[ 48.605245] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:283:DP-MST B]
<7>[ 48.605384] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DP-MST C]
<7>[ 48.605500] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:285:DP-MST D]
<7>[ 48.605621] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DDI TC4/PHY TC4]
<7>[ 48.605754] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:291:DP-MST A]
<7>[ 48.605884] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:292:DP-MST B]
<7>[ 48.606070] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:293:DP-MST C]
<7>[ 48.606185] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:294:DP-MST D]
<7>[ 48.606320] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A
<7>[ 48.607829] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 turn panel power on
<7>[ 48.607990] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 wait for panel power cycle (492 ms remaining)
<7>[ 48.840480] i915 0000:00:02.0: [drm:gsc_work [i915]] GT1: GSC Proxy initialized
<7>[ 49.107229] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7>[ 49.185131] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7>[ 49.185896] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 wait for panel power on
<7>[ 49.186556] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7>[ 49.218258] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7>[ 49.218829] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:240:DDI A/PHY A] - long
<7>[ 49.219341] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20
<7>[ 49.219917] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:240:DDI A/PHY A]
<7>[ 49.356230] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 49.356228] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 49.356229] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected)
<7>[ 49.356401] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected)
<7>[ 49.387722] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7>[ 49.390120] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 49.390627] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7>[ 49.394617] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80
<7>[ 49.395487] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:241:eDP-1][ENCODER:240:DDI A/PHY A][DPRX] Reloading eDP link rates
<7>[ 49.396424] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:241:eDP-1][ENCODER:240:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07
<7>[ 49.397478] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:241:eDP-1][ENCODER:240:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7>[ 49.398233] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:241:eDP-1][ENCODER:240:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7>[ 49.399446] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:241:eDP-1][ENCODER:240:DDI A/PHY A][DPRX] Clock recovery OK
<7>[ 49.399569] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:241:eDP-1][ENCODER:240:DDI A/PHY A][DPRX] Using DP training pattern TPS3
<7>[ 49.401205] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:241:eDP-1][ENCODER:240:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7>[ 49.401323] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:241:eDP-1][ENCODER:240:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4
<7>[ 49.401988] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A
<7>[ 49.402242] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]
<7>[ 49.402371] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A
<7>[ 49.402552] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:241:eDP-1] set backlight PWM = 192000
<7>[ 49.413408] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7>[ 49.415095] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:241:eDP-1]
<7>[ 49.415297] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:82:pipe A]
<7>[ 49.416484] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp
<6>[ 49.418008] Console: switching to colour frame buffer device 180x56
<6>[ 49.426309] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
<7>[ 49.450831] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 14
<7>[ 49.451052] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: C0
<7>[ 49.451227] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no
<7>[ 49.451395] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: yes
<7>[ 49.451647] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: yes
<7>[ 49.451849] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes
<7>[ 49.452004] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes
<7>[ 49.452139] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: yes
<7>[ 49.452268] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes
<7>[ 49.452399] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no
<7>[ 49.452530] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes
<7>[ 49.452661] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no
<7>[ 49.452819] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes
<7>[ 49.452995] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no
<7>[ 49.453149] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes
<7>[ 49.453287] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: no
<7>[ 49.453417] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no
<7>[ 49.453547] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no
<7>[ 49.453668] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes
<7>[ 49.453797] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes
<7>[ 49.453933] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: yes
<7>[ 49.454054] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 38400 kHz
<7>[ 49.454450] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device
<7>[ 49.454594] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D
<7>[ 49.455174] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C
<7>[ 49.455383] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B
<7>[ 49.455650] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x7d55 rev=0x08 platform=METEORLAKE (subplatform=0x0) gen=12
<7>[ 49.455743] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 12.71
<7>[ 49.455849] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 13
<7>[ 49.455954] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: B0
<7>[ 49.456041] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: C0
<7>[ 49.456128] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 0
<7>[ 49.456214] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x41
<7>[ 49.456298] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x211000
<7>[ 49.456382] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: METEORLAKE
<7>[ 49.456465] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48
<7>[ 49.456547] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2
<7>[ 49.456630] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 46
<7>[ 49.456712] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no
<7>[ 49.456805] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no
<7>[ 49.456911] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no
<7>[ 49.456994] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes
<7>[ 49.457076] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no
<7>[ 49.457158] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no
<7>[ 49.457240] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes
<7>[ 49.457320] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes
<7>[ 49.457401] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no
<7>[ 49.457481] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: yes
<7>[ 49.457563] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: yes
<7>[ 49.457647] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes
<7>[ 49.457729] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no
<7>[ 49.457822] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no
<7>[ 49.457927] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: yes
<7>[ 49.458008] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: yes
<7>[ 49.458094] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]]
<7>[ 49.458110] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 49.458088] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no
<7>[ 49.458167] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no
<7>[ 49.458247] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: no
<7>[ 49.458321] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:241:eDP-1]
<7>[ 49.458327] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes
<7>[ 49.458332] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:241:eDP-1]
<7>[ 49.458406] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: yes
<7>[ 49.458486] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no
<7>[ 49.458566] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no
<7>[ 49.458645] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: yes
<7>[ 49.458724] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: yes
<7>[ 49.458812] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: yes
<7>[ 49.458901] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no
<7>[ 49.458983] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: yes
<7>[ 49.459075] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes
<7>[ 49.459162] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no
<7>[ 49.459249] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes
<7>[ 49.459337] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes
<7>[ 49.459430] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: yes
<7>[ 49.459517] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: no
<7>[ 49.459604] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no
<7>[ 49.459695] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no
<7>[ 49.459741] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 49.459790] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no
<7>[ 49.459899] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no
<7>[ 49.459982] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled
<7>[ 49.460065] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 400003
<7>[ 49.460148] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 8
<7>[ 49.460230] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: geometry dss mask=00000000,000000ff
<7>[ 49.460319] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: compute dss mask=00000000,000000ff
<7>[ 49.460406] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 128
<7>[ 49.460495] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 16
<7>[ 49.460589] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no
<7>[ 49.460684] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no
<7>[ 49.460774] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: no
<7>[ 49.460822] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 49.460893] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 4041400
<7>[ 49.460962] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7>[ 49.460990] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 8
<7>[ 49.461074] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: geometry dss mask=00000000,0000ff00
<7>[ 49.461094] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7>[ 49.461158] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: compute dss mask=00000000,0000ff00
<7>[ 49.461241] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 128
<7>[ 49.461291] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7>[ 49.461295] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] ELD monitor
<7>[ 49.461301] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] ELD size 20, SAD count 0
<7>[ 49.461325] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 16
<7>[ 49.461321] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] VRR capable: no
<7>[ 49.461408] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no
<7>[ 49.461455] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 49.461490] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no
<7>[ 49.461571] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: no
<6>[ 49.461656] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled
<6>[ 49.461656] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled
<6>[ 49.461657] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled
<7>[ 49.462924] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 49.463095] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 49.464663] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:241:eDP-1] probed modes:
<7>[ 49.464679] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7>[ 49.464687] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:250:DP-1]
<7>[ 49.464695] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:250:DP-1]
<7>[ 49.469865] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:250:DP-1] disconnected
<7>[ 49.469876] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:262:HDMI-A-1]
<7>[ 49.469884] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:262:HDMI-A-1]
<7>[ 49.474845] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:262:HDMI-A-1] disconnected
<7>[ 49.474854] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:268:DP-2]
<7>[ 49.474862] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:268:DP-2]
<7>[ 49.475340] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 49.475550] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:268:DP-2] disconnected
<7>[ 49.475559] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:277:HDMI-A-2]
<7>[ 49.475566] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:277:HDMI-A-2]
<7>[ 49.475836] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy)
<7>[ 49.480804] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:277:HDMI-A-2] disconnected
<7>[ 49.480814] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:281:DP-3]
<7>[ 49.480821] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:281:DP-3]
<7>[ 49.481028] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 49.481232] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:281:DP-3] disconnected
<7>[ 49.481241] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:290:DP-4]
<7>[ 49.481249] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:290:DP-4]
<7>[ 49.481456] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt)
<7>[ 49.481630] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:290:DP-4] disconnected
<7>[ 49.481638] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:241:eDP-1] enabled? yes
<7>[ 49.481641] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:250:DP-1] enabled? no
<7>[ 49.481642] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:HDMI-A-1] enabled? no
<7>[ 49.481643] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:268:DP-2] enabled? no
<7>[ 49.481644] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:277:HDMI-A-2] enabled? no
<7>[ 49.481645] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:281:DP-3] enabled? no
<7>[ 49.481646] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:290:DP-4] enabled? no
<7>[ 49.481732] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 49.481746] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:241:eDP-1] found preferred mode: 2880x1800
<7>[ 49.481747] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7>[ 49.481774] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 49.491616] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7>[ 49.491687] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]]
<7>[ 49.491706] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 49.492002] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:241:eDP-1]
<7>[ 49.492021] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:241:eDP-1]
<7>[ 49.494588] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7>[ 49.494605] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 49.495446] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 49.495634] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7>[ 49.495913] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7>[ 49.496290] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7>[ 49.496297] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] ELD monitor
<7>[ 49.496308] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] ELD size 20, SAD count 0
<7>[ 49.496336] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] VRR capable: no
<7>[ 49.496503] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 49.498013] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 49.498152] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 49.498496] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]
<7>[ 49.500227] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:241:eDP-1] probed modes:
<7>[ 49.500243] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7>[ 49.500252] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:250:DP-1]
<7>[ 49.500261] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:250:DP-1]
<7>[ 49.504865] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:250:DP-1] disconnected
<7>[ 49.504882] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:262:HDMI-A-1]
<7>[ 49.504892] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:262:HDMI-A-1]
<7>[ 49.510148] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:262:HDMI-A-1] disconnected
<7>[ 49.510193] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:268:DP-2]
<7>[ 49.510225] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:268:DP-2]
<7>[ 49.510908] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:268:DP-2] disconnected
<7>[ 49.510923] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:277:HDMI-A-2]
<7>[ 49.510931] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:277:HDMI-A-2]
<7>[ 49.515857] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:277:HDMI-A-2] disconnected
<7>[ 49.515871] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:281:DP-3]
<7>[ 49.515880] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:281:DP-3]
<7>[ 49.516129] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:281:DP-3] disconnected
<7>[ 49.516139] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:290:DP-4]
<7>[ 49.516147] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:290:DP-4]
<7>[ 49.516362] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:290:DP-4] disconnected
<7>[ 49.516370] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:241:eDP-1] enabled? yes
<7>[ 49.516376] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:250:DP-1] enabled? no
<7>[ 49.516377] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:HDMI-A-1] enabled? no
<7>[ 49.516379] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:268:DP-2] enabled? no
<7>[ 49.516381] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:277:HDMI-A-2] enabled? no
<7>[ 49.516383] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:281:DP-3] enabled? no
<7>[ 49.516384] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:290:DP-4] enabled? no
<7>[ 49.516489] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 49.516510] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:241:eDP-1] found preferred mode: 2880x1800
<7>[ 49.516512] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7>[ 49.516542] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 49.525156] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7>[ 49.536007] i915 0000:00:02.0: [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=9600/192000
<7>[ 49.536196] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7>[ 49.536254] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7>[ 49.536267] i915 0000:00:02.0: [drm:intel_panel_actually_set_backlight [i915]] [CONNECTOR:241:eDP-1] set backlight level = 13892
<7>[ 49.538835] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509
<7>[ 49.569106] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7>[ 49.569190] [IGT] i915_module_load: finished subtest load, SUCCESS
<7>[ 49.569252] [IGT] i915_module_load: exiting, ret=0
<7>[ 49.574205] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7>[ 50.572774] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected)
<7>[ 50.572844] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 50.573267] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected)
<7>[ 50.573402] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 52.027663] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 turning VDD off
<7>[ 52.028347] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
<7>[ 52.028843] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7>[ 52.029555] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7>[ 52.029864] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02