Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

integration-manifest git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.36 seconds
Igt-Version 
IGT-Version: 2.4-g65d691069 (x86_64) (Linux: 7.1.0-rc3-CI_DRM_18497-ga1a572646314+ x86_64)
Out 
Using IGT_SRANDOM=1778887261 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.356s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.356s)
Dmesg
<6> [290.662397] Console: switching to colour dummy device 80x25
<6> [290.662748] [IGT] kms_force_connector_basic: executing
<7> [290.667183] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_TC2
<7> [290.674849] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [290.675951] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [290.692289] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [290.693411] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:529:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [290.693419] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [290.693423] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [290.697663] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [290.697691] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [290.697695] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [290.701934] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [290.701987] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [290.701990] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [290.706228] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<6> [290.706496] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [290.706759] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:529:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [290.706763] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [290.706766] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [290.765700] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [290.771344] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [290.771362] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [290.771635] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [290.777173] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [290.777178] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [290.777301] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] status updated from disconnected to connected
<7> [290.777342] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] probed modes:
<7> [290.777345] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [290.777348] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [290.777351] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [290.777353] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [290.777355] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [290.777376] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [290.777379] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [290.778104] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [290.778183] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [290.838701] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [290.844362] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [290.844373] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [290.844587] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [290.850144] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [290.850149] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [290.850329] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] probed modes:
<7> [290.850333] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [290.850336] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [290.850340] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [290.850342] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [290.850345] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [290.850504] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:529:HDMI-A-1] EDID override set
<7> [290.850527] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [290.850595] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_TC2
<7> [290.855801] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [290.855962] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:529:HDMI-A-1] ELD monitor IGT
<7> [290.855965] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:529:HDMI-A-1] ELD size 24, SAD count 0
<7> [290.914165] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [290.919813] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [290.919949] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [290.919960] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [290.919967] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] probed modes:
<7> [290.919971] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [290.919976] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [290.919980] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [290.919984] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [290.919987] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [290.919991] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [290.920104] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:529:HDMI-A-1] EDID override set
<7> [290.920120] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [290.920133] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [290.920304] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:529:HDMI-A-1] ELD monitor IGT
<7> [290.920307] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:529:HDMI-A-1] ELD size 24, SAD count 0
<7> [290.920310] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:529:HDMI-A-1] EDID changed, epoch counter 4
<7> [290.930994] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00020000, pins 0x00000400, long 0x00000000
<7> [290.931774] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [290.932527] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [290.936674] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 20 00 00
<7> [290.940950] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff88811d9c3280 (2)
<7> [290.941839] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88811d9c3280 (1)
<7> [290.941849] i915 0000:00:02.0: [drm:drm_dp_mst_hpd_irq_handle_event [drm_display_helper]] Got RSN: pn: 2 avail_pbn 0
<7> [290.941992] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff88811d9c3280 (2)
<7> [290.942002] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88811d9c3280 (1)
<7> [290.946661] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 20 00 00
<7> [290.951012] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff88811d9c3280 (2)
<7> [290.951944] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88811d9c3280 (1)
<7> [290.951953] i915 0000:00:02.0: [drm:drm_dp_mst_hpd_irq_handle_event [drm_display_helper]] Got RSN: pn: 2 avail_pbn 0
<7> [290.952101] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff88811d9c3280 (2)
<7> [290.952110] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88811d9c3280 (1)
<7> [290.956680] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [290.978699] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [290.984191] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [290.984271] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [290.984277] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] probed modes:
<7> [290.984280] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [290.984282] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [290.984285] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [290.984287] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [290.984290] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [290.984373] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:529:HDMI-A-1] EDID override reset
<7> [290.984390] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [290.984393] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [291.028846] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00020000, pins 0x00000400, long 0x00000000
<7> [291.029624] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [291.030423] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [291.035027] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [291.042708] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [291.048357] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [291.048364] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [291.048482] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [291.053914] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [291.053919] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [291.054036] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:529:HDMI-A-1] EDID changed, epoch counter 5
<7> [291.054073] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [291.054081] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [291.054086] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] probed modes:
<7> [291.054088] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [291.054091] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [291.054093] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [291.054096] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [291.054098] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [291.054233] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:529:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [291.054237] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [291.054240] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [291.058461] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] status updated from connected to disconnected
<7> [291.058493] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [291.058517] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [291.058562] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [291.058588] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [291.058592] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [291.062916] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<6> [291.063430] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [291.063904] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [291.064966] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:508:eDP-1] force updated from 0 to 0 or reprobing
<7> [291.064971] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [291.064975] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:508:eDP-1]
<7> [291.065595] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [291.066004] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [291.066149] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [291.066281] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [291.066421] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [291.066425] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [291.066428] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [291.066439] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] VRR capable: no
<7> [291.066568] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [291.066707] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [291.067189] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [291.067193] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [291.067218] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [291.067221] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:508:eDP-1]
<7> [291.067850] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [291.068264] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [291.068383] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [291.068501] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [291.068631] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [291.068634] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [291.068637] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [291.068649] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] VRR capable: no
<7> [291.068766] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [291.068883] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [291.069317] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [291.069320] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [291.069392] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:508:eDP-1] EDID override reset
<7> [291.069404] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [291.069407] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:508:eDP-1]
<7> [291.069948] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [291.070356] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [291.070471] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [291.070585] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [291.070713] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [291.070716] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [291.070719] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [291.070729] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] VRR capable: no
<7> [291.070844] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [291.070959] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [291.071405] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [291.071408] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [291.071481] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:517:DP-1] EDID override reset
<7> [291.071493] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:DP-1]
<7> [291.071496] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:517:DP-1]
<7> [291.075693] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:DP-1] disconnected
<7> [291.075791] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:529:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [291.075794] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [291.075797] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [291.080020] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [291.080040] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [291.080043] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [291.084384] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [291.084452] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:529:HDMI-A-1] EDID override reset
<7> [291.084463] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [291.084466] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [291.088679] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [291.088749] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:535:DP-2] EDID override reset
<7> [291.088761] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2]
<7> [291.088764] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:535:DP-2]
<7> [291.088991] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2] disconnected
<7> [291.089050] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:544:DP-3] EDID override reset
<7> [291.089061] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:DP-3]
<7> [291.089063] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:544:DP-3]
<7> [291.092410] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: DPCD: 12 0a c4 01 00 05 01 83 02 00 00 00 00 00 04
<7> [291.099014] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:544:DP-3][ENCODER:543:DDI TC2/PHY TC2][DPRX] LTTPR common capabilities: 20 1e 80 aa 04 00 01 03
<7> [291.101631] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:544:DP-3][ENCODER:543:DDI TC2/PHY TC2][LTTPR 1] PHY capabilities: 04 03 00
<7> [291.102716] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: LTTPR 1: OUI 98-4f-ee dev-ID GBR HW-rev 10.0 SW-rev 2.14 quirks 0x0000
<7> [291.105000] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: DPCD: 12 0a c4 01 00 05 01 83 02 00 00 00 00 00 04
<7> [291.107203] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: DP branch: OUI 90-cc-24 dev-ID SYNA#" HW-rev 1.0 SW-rev 2.27 quirks 0x0028
<7> [291.113276] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: DPCD DFP: 08 08 0d
<7> [291.115249] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:543:DDI TC2/PHY TC2] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [291.126375] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00020000, pins 0x00000400, long 0x00000000
<7> [291.126638] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [291.126887] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [291.129411] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000, 2000000
<7> [291.129627] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
<7> [291.129786] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
<7> [291.129942] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:DP-3] disconnected
<7> [291.130058] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:553:DP-4] EDID override reset
<7> [291.130077] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:553:DP-4]
<7> [291.130081] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:553:DP-4]
<7> [291.130434] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:553:DP-4] disconnected
<7> [291.130515] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:562:DP-5] EDID override reset
<7> [291.130530] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:562:DP-5]
<7> [291.130534] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:562:DP-5]
<7> [291.130773] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:562:DP-5] disconnected
<7> [291.130835] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:573:DP-6] EDID override reset
<7> [291.130847] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:573:DP-6]
<7> [291.130852] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff888155a19000 (2)
<7> [291.130863] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff888155a19000 (1)
<7> [291.130875] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff888155a19000 (2)
<7> [291.130892] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff88811d9c3280 (2)
<7> [291.133389] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [291.139197] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_TC2
<7> [291.185162] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [291.185605] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_TC2
<7> [291.191223] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [291.194089] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff88811d9c3280 (3)
<7> [291.194163] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88811d9c3280 (2)
<7> [291.194188] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88811d9c3280 (2)
<7> [291.194214] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff88811d9c3280 (2)
<7> [291.200370] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [291.202732] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff88811d9c3280 (3)
<7> [291.207440] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88811d9c3280 (2)
<7> [291.212324] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [291.214679] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff88811d9c3280 (3)
<7> [291.219190] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88811d9c3280 (2)
<7> [291.223889] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00020000, pins 0x00000400, long 0x00000000
<7> [291.224327] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [291.224847] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [291.224988] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [291.229057] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [291.231425] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff88811d9c3280 (3)
<7> [291.235836] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88811d9c3280 (2)
<7> [291.235848] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88811d9c3280 (1)
<7> [291.235868] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff888155a19000 (1)
<7> [291.235879] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:573:DP-6] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [291.235884] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:573:DP-6] ELD monitor DELL U2412M
<7> [291.235887] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:573:DP-6] ELD size 32, SAD count 0
<7> [291.236019] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:573:DP-6] probed modes:
<7> [291.236023] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [291.236026] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [291.236031] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
<7> [291.236034] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
<7> [291.236037] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [291.236039] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [291.236042] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [291.236045] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [291.236048] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [291.236051] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
<7> [291.236168] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:575:DP-7] EDID override reset
<7> [291.236184] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:575:DP-7]
<7> [291.236189] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff888155a1c000 (2)
<7> [291.236201] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff888155a1c000 (1)
<7> [291.236211] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff888155a1c000 (2)
<7> [291.236222] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff88811d9c3280 (2)
<7> [291.241640] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [291.243929] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff88811d9c3280 (3)
<7> [291.243942] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88811d9c3280 (2)
<7> [291.243955] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88811d9c3280 (1)
<7> [291.243974] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff88811d9c3280 (2)
<7> [291.249741] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [291.252087] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff88811d9c3280 (3)
<7> [291.256513] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88811d9c3280 (2)
<7> [291.261313] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [291.263670] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff88811d9c3280 (3)
<7> [291.268043] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88811d9c3280 (2)
<7> [291.272942] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [291.275379] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff88811d9c3280 (3)
<7> [291.279827] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88811d9c3280 (2)
<7> [291.279843] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88811d9c3280 (1)
<7> [291.279862] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff888155a1c000 (1)
<7> [291.279873] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:575:DP-7] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [291.279877] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:575:DP-7] ELD monitor DELL U2412M
<7> [291.279880] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:575:DP-7] ELD size 32, SAD count 0
<7> [291.279990] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:575:DP-7] probed modes:
<7> [291.279994] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [291.279998] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [291.280001] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
<7> [291.280004] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
<7> [291.280007] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [291.280011] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [291.280014] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [291.280017] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [291.280020] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [291.280024] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
<7> [291.280560] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:577:DP-8] EDID override reset
<7> [291.280578] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:577:DP-8]
<7> [291.280584] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff8881573b1000 (2)
<7> [291.280598] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff8881573b1000 (1)
<7> [291.280610] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff8881573b1000 (2)
<7> [291.280621] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff8881573b1000 (1)
<7> [291.280632] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:577:DP-8] disconnected
<6> [291.281311] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [291.281951] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [291.284750] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [291.299434] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [291.299439] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [291.299494] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [291.299499] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:508:eDP-1]
<7> [291.300070] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [291.300588] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [291.300735] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [291.300879] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [291.301025] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [291.301029] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [291.301032] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [291.301043] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] VRR capable: no
<7> [291.301175] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [291.301291] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [291.301711] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [291.301715] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [291.301719] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:DP-1]
<7> [291.301722] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:517:DP-1]
<7> [291.305960] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:DP-1] disconnected
<7> [291.305963] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [291.305966] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [291.310158] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [291.310165] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2]
<7> [291.310169] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:535:DP-2]
<7> [291.310423] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2] disconnected
<7> [291.310427] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:DP-3]
<7> [291.310430] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:544:DP-3]
<7> [291.313646] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: DPCD: 12 0a c4 01 00 05 01 83 02 00 00 00 00 00 04
<7> [291.320172] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:544:DP-3][ENCODER:543:DDI TC2/PHY TC2][DPRX] LTTPR common capabilities: 20 1e 80 aa 04 00 01 03
<7> [291.322605] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00020000, pins 0x00000400, long 0x00000000
<7> [291.322831] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [291.323056] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [291.323191] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:544:DP-3][ENCODER:543:DDI TC2/PHY TC2][LTTPR 1] PHY capabilities: 04 03 00
<7> [291.327240] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [291.328203] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: LTTPR 1: OUI 98-4f-ee dev-ID GBR HW-rev 10.0 SW-rev 2.14 quirks 0x0000
<7> [291.330469] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: DPCD: 12 0a c4 01 00 05 01 83 02 00 00 00 00 00 04
<7> [291.332637] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: DP branch: OUI 90-cc-24 dev-ID SYNA#" HW-rev 1.0 SW-rev 2.27 quirks 0x0028
<7> [291.338717] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: DPCD DFP: 08 08 0d
<7> [291.340752] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:543:DDI TC2/PHY TC2] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [291.354967] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000, 2000000
<7> [291.355135] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
<7> [291.355291] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
<7> [291.355424] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:DP-3] disconnected
<7> [291.355428] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:553:DP-4]
<7> [291.355431] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:553:DP-4]
<7> [291.355696] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:553:DP-4] disconnected
<7> [291.355700] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:562:DP-5]
<7> [291.355704] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:562:DP-5]
<7> [291.355969] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:562:DP-5] disconnected
<7> [291.355973] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:573:DP-6]
<7> [291.355977] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff888155a19000 (2)
<7> [291.355992] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff888155a19000 (1)
<7> [291.356005] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff888155a19000 (2)
<7> [291.356017] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff88811d9c3280 (2)
<7> [291.387196] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_TC2
<7> [291.407150] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [291.407620] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_TC2
<7> [291.413760] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [291.416674] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff88811d9c3280 (3)
<7> [291.416700] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88811d9c3280 (2)
<7> [291.416736] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88811d9c3280 (1)
<7> [291.416790] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff88811d9c3280 (2)
<7> [291.420751] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00020000, pins 0x00000400, long 0x00000000
<7> [291.421492] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [291.424171] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [291.426558] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff88811d9c3280 (3)
<7> [291.431020] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88811d9c3280 (2)
<7> [291.435967] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [291.438378] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff88811d9c3280 (3)
<7> [291.442950] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88811d9c3280 (2)
<7> [291.447846] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [291.450290] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff88811d9c3280 (3)
<7> [291.454674] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88811d9c3280 (2)
<7> [291.454688] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88811d9c3280 (1)
<7> [291.454708] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff888155a19000 (1)
<7> [291.454719] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:573:DP-6] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [291.454724] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:573:DP-6] ELD monitor DELL U2412M
<7> [291.454727] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:573:DP-6] ELD size 32, SAD count 0
<7> [291.454871] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:573:DP-6] probed modes:
<7> [291.454874] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [291.454879] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [291.454882] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
<7> [291.454886] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
<7> [291.454889] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [291.454892] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [291.454896] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [291.454899] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [291.454903] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [291.454906] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
<7> [291.454910] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:575:DP-7]
<7> [291.454916] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff888155a1c000 (2)
<7> [291.454930] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff888155a1c000 (1)
<7> [291.454940] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff888155a1c000 (2)
<7> [291.454951] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff88811d9c3280 (2)
<7> [291.460613] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [291.463009] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff88811d9c3280 (3)
<7> [291.463025] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88811d9c3280 (2)
<7> [291.463042] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88811d9c3280 (1)
<7> [291.463063] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff88811d9c3280 (2)
<7> [291.468877] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [291.471250] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff88811d9c3280 (3)
<7> [291.475658] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88811d9c3280 (2)
<7> [291.480437] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [291.482821] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff88811d9c3280 (3)
<7> [291.487255] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88811d9c3280 (2)
<7> [291.492027] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [291.494416] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff88811d9c3280 (3)
<7> [291.498874] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88811d9c3280 (2)
<7> [291.498892] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff88811d9c3280 (1)
<7> [291.498916] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff888155a1c000 (1)
<7> [291.498929] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:575:DP-7] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [291.498934] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:575:DP-7] ELD monitor DELL U2412M
<7> [291.498938] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:575:DP-7] ELD size 32, SAD count 0
<7> [291.499078] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:575:DP-7] probed modes:
<7> [291.499082] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [291.499087] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [291.499090] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
<7> [291.499094] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
<7> [291.499097] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [291.499101] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [291.499104] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [291.499108] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [291.499111] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [291.499127] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
<7> [291.499133] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:577:DP-8]
<7> [291.499140] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff8881573b1000 (2)
<7> [291.499155] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff8881573b1000 (1)
<7> [291.499168] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:577:DP-8] disconnected
<7> [291.499173] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:eDP-1] enabled? yes
<7> [291.499178] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:517:DP-1] enabled? no
<7> [291.499181] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:529:HDMI-A-1] enabled? no
<7> [291.499184] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:535:DP-2] enabled? no
<7> [291.499186] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:544:DP-3] enabled? no
<7> [291.499189] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:553:DP-4] enabled? no
<7> [291.499193] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:562:DP-5] enabled? no
<7> [291.499195] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:573:DP-6] enabled? yes
<7> [291.499198] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:575:DP-7] enabled? yes
<7> [291.499201] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:577:DP-8] enabled? no
<7> [291.499243] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [291.499257] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:eDP-1] found preferred mode: 2880x1800
<7> [291.499264] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:573:DP-6] found preferred mode: 1920x1200
<7> [291.499269] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:575:DP-7] found preferred mode: 1920x1200
<7> [291.499272] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7> [291.499420] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 2880x1800 set (0,0)
<7> [291.499435] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:269:pipe B] desired mode 1920x1200 set (0,0)
<7> [291.499442] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:387:pipe C] desired mode 1920x1200 set (0,0)
<7> [291.503997] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [291.504257] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [291.508397] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [291.517621] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00020000, pins 0x00000400, long 0x00000000
<7> [291.517855] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [291.518084] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [291.518239] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [291.522214] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<6> [291.534930] Console: switching to colour frame buffer device 180x56
Created at 2026-05-15 23:37:08