Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

integration-manifest git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.04 seconds
Igt-Version 
IGT-Version: 2.4-g65d691069 (x86_64) (Linux: 7.1.0-rc3-CI_DRM_18496-g6681fce6f64e+ x86_64)
Out 
Using IGT_SRANDOM=1778881445 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.037s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.037s)
Dmesg
<6> [145.511124] Console: switching to colour dummy device 80x25
<6> [145.511400] [IGT] kms_force_connector_basic: executing
<7> [145.514342] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [145.515223] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [145.515580] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [145.516384] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:399:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [145.516395] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1]
<7> [145.516403] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-1]
<7> [145.520811] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1] disconnected
<7> [145.520871] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1]
<7> [145.520878] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-1]
<7> [145.525191] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1] disconnected
<7> [145.525247] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1]
<7> [145.525253] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-1]
<7> [145.529572] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1] disconnected
<6> [145.529890] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [145.530323] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:399:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [145.530332] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1]
<7> [145.530339] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:399:HDMI-A-1]
<7> [145.530812] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [145.531137] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [145.531718] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [145.532087] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [145.532109] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [145.532428] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [145.536963] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [145.536973] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [145.537181] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1] status updated from disconnected to connected
<7> [145.537254] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1] probed modes:
<7> [145.537259] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [145.537264] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [145.537269] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [145.537273] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [145.537278] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [145.537301] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [145.537384] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [145.537443] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1]
<7> [145.537449] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:399:HDMI-A-1]
<7> [145.537973] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [145.538316] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [145.538850] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [145.539197] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [145.539214] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [145.539664] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [145.546050] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [145.546074] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [145.547481] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1] probed modes:
<7> [145.547495] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [145.547503] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [145.547510] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [145.547517] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [145.547551] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [145.548024] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:399:HDMI-A-1] EDID override set
<7> [145.548054] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1]
<7> [145.548059] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:399:HDMI-A-1]
<7> [145.548314] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-1] ELD monitor IGT
<7> [145.548320] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-1] ELD size 24, SAD count 0
<7> [145.548551] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [145.548790] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [145.549288] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [145.549520] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [145.549755] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [145.549772] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [145.549785] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1] probed modes:
<7> [145.549791] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [145.549798] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [145.549804] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [145.549811] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [145.549817] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [145.549823] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [145.550065] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:399:HDMI-A-1] EDID override set
<7> [145.550112] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1]
<7> [145.550119] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:399:HDMI-A-1]
<7> [145.550486] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-1] ELD monitor IGT
<7> [145.550495] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-1] ELD size 24, SAD count 0
<7> [145.550503] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:399:HDMI-A-1] EDID changed, epoch counter 4
<7> [145.550798] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [145.551079] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [145.551446] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [145.551705] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [145.551898] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [145.551914] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1] probed modes:
<7> [145.551920] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [145.551927] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [145.551933] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [145.551939] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [145.551944] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [145.552140] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:399:HDMI-A-1] EDID override reset
<7> [145.552182] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1]
<7> [145.552189] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:399:HDMI-A-1]
<7> [145.552709] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [145.552974] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [145.553428] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [145.553684] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [145.553699] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [145.553956] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [145.558173] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [145.558183] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [145.558374] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:399:HDMI-A-1] EDID changed, epoch counter 5
<7> [145.558459] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [145.558471] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [145.558480] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1] probed modes:
<7> [145.558485] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [145.558489] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [145.558493] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [145.558497] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [145.558500] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [145.558734] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:399:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [145.558741] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1]
<7> [145.558747] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-1]
<7> [145.563062] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1] status updated from connected to disconnected
<7> [145.563078] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1] disconnected
<7> [145.563155] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1]
<7> [145.563162] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-1]
<7> [145.563422] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [145.564312] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [145.567499] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1] disconnected
<6> [145.567847] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [145.568302] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [145.569101] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:390:eDP-1] force updated from 0 to 0 or reprobing
<7> [145.569110] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:eDP-1]
<7> [145.569117] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:390:eDP-1]
<7> [145.569742] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [145.570208] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [145.570405] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [145.570610] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000
<7> [145.570838] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] Supported Monitor Refresh rate range is 48 Hz - 120 Hz
<7> [145.570846] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [145.570851] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] ELD monitor LQ134N1JW55
<7> [145.570856] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] ELD size 32, SAD count 0
<7> [145.570879] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:390:eDP-1] VRR capable: yes
<7> [145.571070] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:390:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [145.571258] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:390:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [145.572393] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:eDP-1] probed modes:
<7> [145.572401] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [145.572406] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317250 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [145.572462] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:eDP-1]
<7> [145.572468] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:390:eDP-1]
<7> [145.573172] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [145.573623] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [145.573835] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [145.574032] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000
<7> [145.574252] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] Supported Monitor Refresh rate range is 48 Hz - 120 Hz
<7> [145.574261] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [145.574266] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] ELD monitor LQ134N1JW55
<7> [145.574271] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] ELD size 32, SAD count 0
<7> [145.574295] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:390:eDP-1] VRR capable: yes
<7> [145.574496] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:390:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [145.574711] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:390:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [145.575257] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:eDP-1] probed modes:
<7> [145.575263] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [145.575268] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317250 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [145.575440] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:390:eDP-1] EDID override reset
<7> [145.575467] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:eDP-1]
<7> [145.575473] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:390:eDP-1]
<7> [145.576085] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [145.576510] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [145.576725] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [145.576925] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000
<7> [145.577143] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] Supported Monitor Refresh rate range is 48 Hz - 120 Hz
<7> [145.577151] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [145.577155] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] ELD monitor LQ134N1JW55
<7> [145.577160] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] ELD size 32, SAD count 0
<7> [145.577179] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:390:eDP-1] VRR capable: yes
<7> [145.577369] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:390:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [145.577573] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:390:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [145.578126] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:eDP-1] probed modes:
<7> [145.578132] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [145.578136] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317250 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [145.578370] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:399:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [145.578377] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1]
<7> [145.578383] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-1]
<7> [145.582689] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1] disconnected
<7> [145.582738] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1]
<7> [145.582743] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-1]
<7> [145.587015] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1] disconnected
<7> [145.587168] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:399:HDMI-A-1] EDID override reset
<7> [145.587195] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1]
<7> [145.587200] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-1]
<7> [145.591465] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1] disconnected
<7> [145.591614] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:408:DP-1] EDID override reset
<7> [145.591637] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:408:DP-1]
<7> [145.591642] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:408:DP-1]
<7> [145.591984] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:408:DP-1] disconnected
<7> [145.592114] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:417:DP-2] EDID override reset
<7> [145.592136] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-2]
<7> [145.592140] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:417:DP-2]
<7> [145.592455] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-2] disconnected
<6> [145.593182] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [145.593606] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [145.602972] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [145.602980] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [145.603044] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:eDP-1]
<7> [145.603051] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:390:eDP-1]
<7> [145.603665] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [145.604110] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [145.604305] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [145.604494] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000
<7> [145.604721] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] Supported Monitor Refresh rate range is 48 Hz - 120 Hz
<7> [145.604730] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [145.604736] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] ELD monitor LQ134N1JW55
<7> [145.604741] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] ELD size 32, SAD count 0
<7> [145.604766] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:390:eDP-1] VRR capable: yes
<7> [145.604966] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:390:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [145.605158] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:390:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [145.605702] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:eDP-1] probed modes:
<7> [145.605708] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [145.605713] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317250 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [145.605719] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1]
<7> [145.605725] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-1]
<7> [145.610022] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1] disconnected
<7> [145.610031] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:408:DP-1]
<7> [145.610037] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:408:DP-1]
<7> [145.610385] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:408:DP-1] disconnected
<7> [145.610392] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-2]
<7> [145.610396] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:417:DP-2]
<7> [145.610740] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-2] disconnected
<7> [145.610746] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:390:eDP-1] enabled? yes
<7> [145.610751] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:399:HDMI-A-1] enabled? no
<7> [145.610755] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:408:DP-1] enabled? no
<7> [145.610758] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:417:DP-2] enabled? no
<7> [145.610783] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [145.610801] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:390:eDP-1] found preferred mode: 1920x1200
<7> [145.610806] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1920x1200 config
<7> [145.610827] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 1920x1200 set (0,0)
<7> [145.619748] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [145.628174] Console: switching to colour frame buffer device 240x75
Created at 2026-05-15 22:02:18