Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

integration-manifest git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.36 seconds
Igt-Version 
IGT-Version: 2.4-g22222b7d9 (x86_64) (Linux: 7.1.0-rc3-CI_DRM_18491-g66af2225d31a+ x86_64)
Out 
Using IGT_SRANDOM=1778787490 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.363s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.363s)
Dmesg
<6> [220.312951] Console: switching to colour dummy device 80x25
<6> [220.313339] [IGT] kms_force_connector_basic: executing
<7> [220.324613] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [220.325767] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [220.326760] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00020000, pins 0x00000400, long 0x00000000
<7> [220.327550] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [220.328284] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [220.328567] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_TC2
<7> [220.333887] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [220.337168] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [220.338697] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:529:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [220.338704] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [220.338709] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [220.342940] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [220.342967] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [220.342970] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [220.347193] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [220.347247] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [220.347249] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [220.351437] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<6> [220.351680] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [220.351945] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:529:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [220.351950] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [220.351953] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [220.412560] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [220.418243] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [220.418257] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [220.418533] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [220.424187] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [220.424195] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [220.424365] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] status updated from disconnected to connected
<7> [220.424484] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] probed modes:
<7> [220.424489] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [220.424494] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [220.424498] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [220.424503] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [220.424507] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [220.424527] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [220.424600] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [220.424631] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [220.424742] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00020000, pins 0x00000400, long 0x00000000
<7> [220.425526] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [220.426430] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [220.429439] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [220.434474] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [220.489024] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [220.494674] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [220.494685] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [220.494896] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [220.500391] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [220.500397] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [220.500558] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] probed modes:
<7> [220.500561] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [220.500564] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [220.500567] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [220.500569] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [220.500571] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [220.500715] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:529:HDMI-A-1] EDID override set
<7> [220.500738] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [220.500740] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [220.500901] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:529:HDMI-A-1] ELD monitor IGT
<7> [220.500904] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:529:HDMI-A-1] ELD size 24, SAD count 0
<7> [220.523107] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00020000, pins 0x00000400, long 0x00000000
<7> [220.523886] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [220.524694] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [220.529205] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [220.562558] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [220.568187] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [220.568292] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [220.568306] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [220.568311] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] probed modes:
<7> [220.568314] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [220.568317] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [220.568319] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [220.568321] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [220.568323] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [220.568326] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [220.568429] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:529:HDMI-A-1] EDID override set
<7> [220.568451] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [220.568453] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [220.568608] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:529:HDMI-A-1] ELD monitor IGT
<7> [220.568612] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:529:HDMI-A-1] ELD size 24, SAD count 0
<7> [220.568614] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:529:HDMI-A-1] EDID changed, epoch counter 4
<7> [220.621035] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00020000, pins 0x00000400, long 0x00000000
<7> [220.621812] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [220.622647] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [220.627013] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [220.627671] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 20 00 00
<7> [220.633099] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [220.633203] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [220.633203] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100bd62c0 (2)
<7> [220.633211] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] probed modes:
<7> [220.633214] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [220.633233] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [220.633236] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [220.633238] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [220.633240] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [220.633329] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:529:HDMI-A-1] EDID override reset
<7> [220.633350] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [220.633353] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [220.634247] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100bd62c0 (1)
<7> [220.634263] i915 0000:00:02.0: [drm:drm_dp_mst_hpd_irq_handle_event [drm_display_helper]] Got RSN: pn: 2 avail_pbn 0
<7> [220.634531] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100bd62c0 (2)
<7> [220.634548] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100bd62c0 (1)
<7> [220.639960] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 20 00 00
<7> [220.644975] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100bd62c0 (2)
<7> [220.646015] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100bd62c0 (1)
<7> [220.646033] i915 0000:00:02.0: [drm:drm_dp_mst_hpd_irq_handle_event [drm_display_helper]] Got RSN: pn: 2 avail_pbn 0
<7> [220.646236] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100bd62c0 (2)
<7> [220.646251] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100bd62c0 (1)
<7> [220.651033] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [220.694548] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [220.700275] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [220.700285] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [220.700646] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [220.706145] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [220.706152] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [220.706279] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:529:HDMI-A-1] EDID changed, epoch counter 5
<7> [220.706330] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [220.706341] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [220.706347] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] probed modes:
<7> [220.706350] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [220.706353] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [220.706355] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [220.706358] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [220.706360] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [220.706515] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:529:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [220.706520] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [220.706523] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [220.710698] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] status updated from connected to disconnected
<7> [220.710710] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [220.710756] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [220.710759] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [220.710942] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [220.711224] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [220.715022] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<6> [220.715329] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [220.715725] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [220.716923] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:508:eDP-1] force updated from 0 to 0 or reprobing
<7> [220.716930] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [220.716933] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:508:eDP-1]
<7> [220.717581] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [220.718337] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [220.718477] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [220.718610] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [220.718338] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00020000, pins 0x00000400, long 0x00000000
<7> [220.718762] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [220.718765] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [220.718768] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [220.718782] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] VRR capable: no
<7> [220.718907] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [220.719050] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [220.719123] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [220.719860] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [220.721112] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [220.721125] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [220.721192] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [220.721200] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:508:eDP-1]
<7> [220.722129] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [220.722745] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [220.723073] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [220.723377] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [220.723711] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [220.723720] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [220.723729] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [220.723756] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] VRR capable: no
<7> [220.724062] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [220.724356] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [220.724986] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [220.725132] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [220.725140] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [220.725304] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:508:eDP-1] EDID override reset
<7> [220.725334] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [220.725341] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:508:eDP-1]
<7> [220.726279] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [220.727007] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [220.727208] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [220.727405] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [220.727615] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [220.727620] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [220.727625] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [220.727640] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] VRR capable: no
<7> [220.727832] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [220.728066] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [220.728922] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [220.728927] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [220.729075] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:517:DP-1] EDID override reset
<7> [220.729095] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:DP-1]
<7> [220.729100] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:517:DP-1]
<7> [220.733370] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:DP-1] disconnected
<7> [220.733491] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:529:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [220.733494] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [220.733498] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [220.737719] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [220.737741] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [220.737744] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [220.741969] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [220.742089] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:529:HDMI-A-1] EDID override reset
<7> [220.742106] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [220.742110] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [220.746385] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [220.746454] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:535:DP-2] EDID override reset
<7> [220.746465] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2]
<7> [220.746468] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:535:DP-2]
<7> [220.746728] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2] disconnected
<7> [220.746787] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:544:DP-3] EDID override reset
<7> [220.746798] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:DP-3]
<7> [220.746801] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:544:DP-3]
<7> [220.750221] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: DPCD: 12 0a c4 01 00 05 01 83 02 00 00 00 00 00 04
<7> [220.756939] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:544:DP-3][ENCODER:543:DDI TC2/PHY TC2][DPRX] LTTPR common capabilities: 20 1e 80 aa 04 00 01 03
<7> [220.757122] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_TC2
<7> [220.757416] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_TC2
<7> [220.761230] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:544:DP-3][ENCODER:543:DDI TC2/PHY TC2][LTTPR 1] PHY capabilities: 04 03 00
<7> [220.762339] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: LTTPR 1: OUI 98-4f-ee dev-ID GBR HW-rev 10.0 SW-rev 2.14 quirks 0x0000
<7> [220.764741] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: DPCD: 12 0a c4 01 00 05 01 83 02 00 00 00 00 00 04
<7> [220.767012] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: DP branch: OUI 90-cc-24 dev-ID SYNA#" HW-rev 1.0 SW-rev 2.27 quirks 0x0028
<7> [220.773086] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: DPCD DFP: 08 08 0d
<7> [220.775044] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:543:DDI TC2/PHY TC2] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [220.789199] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000, 2000000
<7> [220.789349] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
<7> [220.789494] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
<7> [220.789636] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:DP-3] disconnected
<7> [220.789734] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:553:DP-4] EDID override reset
<7> [220.789749] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:553:DP-4]
<7> [220.789753] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:553:DP-4]
<7> [220.790078] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:553:DP-4] disconnected
<7> [220.790210] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:562:DP-5] EDID override reset
<7> [220.790227] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:562:DP-5]
<7> [220.790231] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:562:DP-5]
<7> [220.790569] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:562:DP-5] disconnected
<7> [220.790667] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:573:DP-6] EDID override reset
<7> [220.790687] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:573:DP-6]
<7> [220.790693] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff88812b9f4000 (2)
<7> [220.790711] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff88812b9f4000 (1)
<7> [220.790725] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff88812b9f4000 (2)
<7> [220.790743] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100bd62c0 (2)
<7> [220.816761] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00020000, pins 0x00000400, long 0x00000000
<7> [220.817467] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [220.818059] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [220.822515] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [220.824794] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100bd62c0 (3)
<7> [220.824816] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100bd62c0 (2)
<7> [220.824844] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100bd62c0 (1)
<7> [220.824885] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100bd62c0 (2)
<7> [220.830886] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [220.833280] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100bd62c0 (3)
<7> [220.837908] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100bd62c0 (2)
<7> [220.842860] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [220.845279] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100bd62c0 (3)
<7> [220.849769] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100bd62c0 (2)
<7> [220.854511] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [220.877013] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [220.881239] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [220.883657] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100bd62c0 (3)
<7> [220.888187] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100bd62c0 (2)
<7> [220.888201] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100bd62c0 (2)
<7> [220.888225] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff88812b9f4000 (1)
<7> [220.888238] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:573:DP-6] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [220.888244] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:573:DP-6] ELD monitor DELL U2412M
<7> [220.888248] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:573:DP-6] ELD size 32, SAD count 0
<7> [220.888383] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:573:DP-6] probed modes:
<7> [220.888388] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [220.888393] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [220.888397] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
<7> [220.888401] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
<7> [220.888405] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [220.888409] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [220.888413] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [220.888417] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [220.888421] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [220.888424] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
<7> [220.888573] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:575:DP-7] EDID override reset
<7> [220.888592] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:575:DP-7]
<7> [220.888599] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff888125974000 (2)
<7> [220.888615] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff888125974000 (1)
<7> [220.888628] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff888125974000 (2)
<7> [220.888643] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100bd62c0 (2)
<7> [220.894485] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [220.897032] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100bd62c0 (3)
<7> [220.897054] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100bd62c0 (2)
<7> [220.897063] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100bd62c0 (2)
<7> [220.897080] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100bd62c0 (2)
<7> [220.902945] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [220.905279] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100bd62c0 (3)
<7> [220.909916] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100bd62c0 (2)
<7> [220.914556] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00020000, pins 0x00000400, long 0x00000000
<7> [220.914813] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [220.915182] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [220.917551] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100bd62c0 (3)
<7> [220.922152] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100bd62c0 (2)
<7> [220.927012] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [220.929371] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100bd62c0 (3)
<7> [220.933771] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100bd62c0 (2)
<7> [220.933785] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100bd62c0 (1)
<7> [220.933803] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff888125974000 (1)
<7> [220.933814] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:575:DP-7] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [220.933818] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:575:DP-7] ELD monitor DELL U2412M
<7> [220.933822] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:575:DP-7] ELD size 32, SAD count 0
<7> [220.933941] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:575:DP-7] probed modes:
<7> [220.933945] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [220.933949] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [220.933953] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
<7> [220.933956] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
<7> [220.933960] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [220.933964] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [220.933967] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [220.933990] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [220.933993] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [220.933997] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
<7> [220.934108] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:577:DP-8] EDID override reset
<7> [220.934126] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:577:DP-8]
<7> [220.934131] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff88812be39000 (2)
<7> [220.934145] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff88812be39000 (1)
<7> [220.934157] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:577:DP-8] disconnected
<6> [220.934891] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [220.935465] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [220.938608] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [220.938760] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [220.942829] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [220.948820] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [220.948825] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [220.948878] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [220.948882] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:508:eDP-1]
<7> [220.949489] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [220.949966] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [220.950166] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [220.950396] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [220.950595] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [220.950600] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [220.950605] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [220.950621] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] VRR capable: no
<7> [220.950864] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [220.951073] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [220.951633] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [220.951639] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [220.951646] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:DP-1]
<7> [220.951652] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:517:DP-1]
<7> [220.955990] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:DP-1] disconnected
<7> [220.955995] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [220.955998] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [220.960186] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [220.960191] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2]
<7> [220.960194] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:535:DP-2]
<7> [220.960472] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2] disconnected
<7> [220.960475] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:DP-3]
<7> [220.960477] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:544:DP-3]
<7> [220.963785] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: DPCD: 12 0a c4 01 00 05 01 83 02 00 00 00 00 00 04
<7> [220.970575] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:544:DP-3][ENCODER:543:DDI TC2/PHY TC2][DPRX] LTTPR common capabilities: 20 1e 80 aa 04 00 01 03
<7> [220.973281] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:544:DP-3][ENCODER:543:DDI TC2/PHY TC2][LTTPR 1] PHY capabilities: 04 03 00
<7> [220.974416] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: LTTPR 1: OUI 98-4f-ee dev-ID GBR HW-rev 10.0 SW-rev 2.14 quirks 0x0000
<7> [220.976732] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: DPCD: 12 0a c4 01 00 05 01 83 02 00 00 00 00 00 04
<7> [220.978887] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: DP branch: OUI 90-cc-24 dev-ID SYNA#" HW-rev 1.0 SW-rev 2.27 quirks 0x0028
<7> [220.984902] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: DPCD DFP: 08 08 0d
<7> [220.986865] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:543:DDI TC2/PHY TC2] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [221.001204] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000, 2000000
<7> [221.001359] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
<7> [221.001506] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
<7> [221.001654] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:DP-3] disconnected
<7> [221.001660] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:553:DP-4]
<7> [221.001664] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:553:DP-4]
<7> [221.002681] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:553:DP-4] disconnected
<7> [221.002686] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:562:DP-5]
<7> [221.002689] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:562:DP-5]
<7> [221.002943] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:562:DP-5] disconnected
<7> [221.002948] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:573:DP-6]
<7> [221.002953] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff88812b9f4000 (2)
<7> [221.003142] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff88812b9f4000 (1)
<7> [221.003154] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff88812b9f4000 (2)
<7> [221.003165] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100bd62c0 (2)
<7> [221.012948] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00020000, pins 0x00000400, long 0x00000000
<7> [221.013185] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [221.013414] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [221.017489] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [221.019835] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100bd62c0 (3)
<7> [221.019851] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100bd62c0 (2)
<7> [221.019870] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100bd62c0 (1)
<7> [221.019891] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100bd62c0 (2)
<7> [221.025637] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [221.045097] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_TC2
<7> [221.072205] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [221.072717] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_TC2
<7> [221.078275] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [221.080810] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100bd62c0 (3)
<7> [221.085266] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100bd62c0 (2)
<7> [221.090196] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [221.092577] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100bd62c0 (3)
<7> [221.097013] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100bd62c0 (2)
<7> [221.101873] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [221.104198] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100bd62c0 (3)
<7> [221.108589] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100bd62c0 (2)
<7> [221.108615] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100bd62c0 (1)
<7> [221.108640] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff88812b9f4000 (1)
<7> [221.108653] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:573:DP-6] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [221.108658] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:573:DP-6] ELD monitor DELL U2412M
<7> [221.108662] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:573:DP-6] ELD size 32, SAD count 0
<7> [221.108801] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:573:DP-6] probed modes:
<7> [221.108806] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [221.108811] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [221.108815] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
<7> [221.108820] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
<7> [221.108824] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [221.108828] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [221.108832] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [221.108837] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [221.108842] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [221.108846] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
<7> [221.108851] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:575:DP-7]
<7> [221.108857] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff888125974000 (2)
<7> [221.108872] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff888125974000 (1)
<7> [221.108884] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff888125974000 (2)
<7> [221.108898] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100bd62c0 (2)
<7> [221.110082] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00020000, pins 0x00000400, long 0x00000000
<7> [221.110450] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [221.114855] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [221.117215] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100bd62c0 (3)
<7> [221.117229] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100bd62c0 (2)
<7> [221.117244] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100bd62c0 (1)
<7> [221.117268] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100bd62c0 (2)
<7> [221.123116] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [221.125473] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100bd62c0 (3)
<7> [221.129844] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100bd62c0 (2)
<7> [221.134710] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [221.137093] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100bd62c0 (3)
<7> [221.141527] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100bd62c0 (2)
<7> [221.146312] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [221.148691] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff888100bd62c0 (3)
<7> [221.153094] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100bd62c0 (2)
<7> [221.153112] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff888100bd62c0 (1)
<7> [221.153132] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff888125974000 (1)
<7> [221.153143] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:575:DP-7] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [221.153148] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:575:DP-7] ELD monitor DELL U2412M
<7> [221.153151] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:575:DP-7] ELD size 32, SAD count 0
<7> [221.153264] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:575:DP-7] probed modes:
<7> [221.153268] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [221.153273] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [221.153276] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
<7> [221.153280] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
<7> [221.153283] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [221.153287] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [221.153290] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [221.153294] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [221.153297] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [221.153301] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
<7> [221.153305] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:577:DP-8]
<7> [221.153309] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff88812be39000 (2)
<7> [221.153322] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff88812be39000 (1)
<7> [221.153333] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:577:DP-8] disconnected
<7> [221.153337] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:eDP-1] enabled? yes
<7> [221.153341] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:517:DP-1] enabled? no
<7> [221.153344] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:529:HDMI-A-1] enabled? no
<7> [221.153347] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:535:DP-2] enabled? no
<7> [221.153350] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:544:DP-3] enabled? no
<7> [221.153353] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:553:DP-4] enabled? no
<7> [221.153355] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:562:DP-5] enabled? no
<7> [221.153358] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:573:DP-6] enabled? yes
<7> [221.153361] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:575:DP-7] enabled? yes
<7> [221.153363] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:577:DP-8] enabled? no
<7> [221.153402] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [221.153419] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:eDP-1] found preferred mode: 2880x1800
<7> [221.153426] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:573:DP-6] found preferred mode: 1920x1200
<7> [221.153432] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:575:DP-7] found preferred mode: 1920x1200
<7> [221.153435] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7> [221.153570] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 2880x1800 set (0,0)
<7> [221.153577] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:269:pipe B] desired mode 1920x1200 set (0,0)
<7> [221.153583] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:387:pipe C] desired mode 1920x1200 set (0,0)
<7> [221.158596] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [221.158748] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [221.162833] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [221.168533] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [221.182333] Console: switching to colour frame buffer device 180x56
<7> [221.207716] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00020000, pins 0x00000400, long 0x00000000
<7> [221.207944] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [221.208166] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:543:DDI TC2/PHY TC2] - short
Created at 2026-05-15 11:34:05