igt@i915_pm_rpm@module-reload on fi-skl-6600u@CI_DRM

Detail	Value
Duration	13.27 seconds
Igt-Version	IGT-Version: 2.4-gc7f4a459b (x86_64) (Linux: 7.1.0-rc3-CI_DRM_18489-g121c16f9d8c5+ x86_64)
Out	Using IGT_SRANDOM=1778769358 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff88813926d7b8 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] hsw_get_pipe_config+0x1b9/0xca0 [i915] intel_crtc_get_pipe_config+0x3a/0x70 [i915] intel_modeset_verify_crtc+0x112/0x730 [i915] intel_atomic_commit_tail+0x1747/0x20c0 [i915] intel_atomic_commit+0x2ff/0x350 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x548/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 __x64_sys_ioctl+0xa5/0x100 Starting subtest: module-reload Reloading i915 with disable_display=1 mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 2 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff88813900d7b8 has 1/2 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get+0x1a/0x30 [i915] intel_display_rpm_get+0x1f/0x30 [i915] intel_display_power_get+0x22/0x70 [i915] intel_audio_component_get_power+0x2f/0x180 [i915] snd_hdac_display_power+0x8a/0x1b0 [snd_hda_core] azx_probe_continue+0x25e/0xb20 [snd_hda_intel] azx_probe_work+0x15/0x20 [snd_hda_intel] process_one_work+0x239/0x740 worker_thread+0x200/0x3f0 kthread+0x10d/0x150 ret_from_fork+0x3bd/0x470 ret_from_fork_asm+0x1a/0x30 ref_tracker: intel_runtime_pm@ffff88813900d7b8 has 1/2 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get+0x1a/0x30 [i915] intel_display_rpm_get+0x1f/0x30 [i915] intel_display_power_get+0x22/0x70 [i915] intel_pps_vdd_on_unlocked+0xbd/0x360 [i915] intel_dp_aux_xfer+0x12b/0x9a0 [i915] intel_dp_aux_transfer+0xd4/0x330 [i915] drm_dp_dpcd_access+0xc3/0x160 [drm_display_helper] drm_dp_dpcd_read+0x87/0x160 [drm_display_helper] drm_dp_read_dpcd_caps+0x35/0x210 [drm_display_helper] intel_dp_init_connector+0x9fc/0x1530 [i915] intel_ddi_init+0xd17/0x1250 [i915] intel_bios_for_each_encoder+0x39/0x60 [i915] intel_setup_outputs+0x210/0xc20 [i915] intel_display_driver_probe_nogem+0x110/0x1e0 [i915] Reloading i915 with mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff8881391257b8 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] hsw_get_pipe_config+0x1b9/0xca0 [i915] intel_crtc_get_pipe_config+0x3a/0x70 [i915] intel_modeset_verify_crtc+0x112/0x730 [i915] intel_atomic_commit_tail+0x1747/0x20c0 [i915] intel_atomic_commit+0x2ff/0x350 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x548/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 __x64_sys_ioctl+0xa5/0x100 Subtest module-reload: SUCCESS (13.272s)
Err	Starting subtest: module-reload Subtest module-reload: SUCCESS (13.272s)
Dmesg	<6> [285.914357] Console: switching to colour dummy device 80x25 <6> [285.915617] [IGT] i915_pm_rpm: executing <7> [285.919787] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [285.920694] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] <7> [285.920707] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1] <7> [285.921811] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [285.922128] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [285.922432] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [285.922757] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [285.922768] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor <7> [285.922774] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0 <7> [285.922803] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no <7> [285.923068] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [285.923374] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [285.925166] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes: <7> [285.925178] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [285.925189] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [285.925315] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] <7> [285.925324] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [285.929771] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected <7> [285.929862] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] <7> [285.929871] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [285.930760] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [285.931041] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [285.931571] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [285.931906] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [285.931915] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [285.932180] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [285.935965] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [285.935984] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [285.936332] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected <7> [285.936460] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] <7> [285.936471] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [285.940822] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected <7> [285.940908] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] <7> [285.940916] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [285.941490] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [285.941755] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [285.942220] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [285.942547] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [285.942554] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [285.942799] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [285.945851] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [285.945860] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [285.946179] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected <7> [285.953335] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] <7> [285.953347] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [285.957737] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected <7> [285.958531] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] <7> [285.958553] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [285.959250] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [285.959646] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [285.960216] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [285.960511] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [285.960518] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [285.960770] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [285.963982] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [285.963991] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [285.964379] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected <7> [285.965036] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] <7> [285.965045] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [285.969427] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected <7> [285.970045] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] <7> [285.970053] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [285.970616] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [285.970880] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [285.971309] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [285.971620] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [285.971628] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [285.971873] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [285.974962] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [285.974971] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [285.975295] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected <7> [285.975759] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] <7> [285.975768] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1] <7> [285.976087] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [285.976376] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [285.976687] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [285.976977] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [285.976986] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor <7> [285.976993] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0 <7> [285.977022] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no <7> [285.977312] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [285.977692] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [285.978492] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes: <7> [285.978501] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [285.978508] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [285.978539] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] <7> [285.978546] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [285.982916] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected <7> [285.982948] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] <7> [285.982956] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [285.983533] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [285.983792] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [285.984221] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [285.984543] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [285.984550] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [285.984795] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [285.987869] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [285.987877] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [285.988217] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected <7> [285.988272] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] <7> [285.988283] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [285.992641] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected <7> [285.992671] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] <7> [285.992679] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [285.993203] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [285.993517] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [285.993929] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [285.994257] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [285.994267] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [285.994545] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [285.998135] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [285.998167] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [285.998474] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected <7> [285.999020] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:145] <7> [286.147919] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [287.044109] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:59:pipe A] <7> [287.044321] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [287.044681] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [287.044996] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [287.045332] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [287.045657] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [287.045957] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [287.046306] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [287.046621] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [287.046919] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [287.047241] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [287.047556] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [287.047851] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [287.048155] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [287.048498] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [287.048796] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [287.049092] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [287.049387] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [287.049677] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [287.049950] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [287.050242] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [287.050533] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [287.050808] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [287.051083] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [287.051375] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [287.051667] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [287.051942] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [287.052242] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [287.052602] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [287.052892] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [287.053184] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [287.053556] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [287.053902] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [287.054195] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [287.054573] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [287.054904] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [287.055197] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [287.055501] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [287.055838] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [287.056118] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [287.056426] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset <7> [287.056760] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:59:pipe A] releasing DPLL 0 <7> [287.057084] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [287.057422] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [287.057732] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [287.057999] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [287.058321] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [287.058670] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [287.059093] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [287.059549] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [287.060043] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [287.060554] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz <7> [287.061042] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [287.061491] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [287.061923] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [287.062392] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [modeset] <7> [287.062846] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no <7> [287.063293] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no <7> [287.063734] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no <7> [287.064430] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [287.066843] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [287.273322] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 0 <7> [287.274922] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [287.280700] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power off <7> [287.281253] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [287.281973] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - short <7> [287.282031] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power off time <7> [287.283580] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [287.332597] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [287.333537] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [287.334216] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [287.334762] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:59:pipe A] <7> [287.334910] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long <7> [287.335676] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [287.335812] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [287.336623] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [287.336937] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:110:DDI A/PHY A] <7> [287.338077] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A] <7> [287.338359] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A] <7> [287.339168] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B] <7> [287.339704] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A] <7> [287.340162] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B] <7> [287.340656] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C] <7> [287.341209] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C] <7> [287.341724] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A] <7> [287.342296] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B] <7> [287.342816] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C] <7> [287.343307] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1] <7> [287.344195] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A] <7> [287.345596] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:84:pipe B] <7> [287.346056] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:109:pipe C] <7> [287.449902] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [287.454487] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [287.455976] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [287.457634] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [287.460915] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [287.484129] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [287.558479] i915 0000:00:02.0: [drm:compute_baseline_pipe_bpp [i915]] [CONNECTOR:111:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [287.559755] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:110:DDI A/PHY A][CRTC:59:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [287.560863] i915 0000:00:02.0: [drm:intel_dp_compute_output_format [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000 <7> [287.562293] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [287.564233] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:110:DDI A/PHY A] [CRTC:59:pipe A] <7> [287.565475] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [287.566924] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [287.568087] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [287.569702] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [287.571416] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [287.573120] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [287.574882] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [287.576635] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [287.578295] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [287.579918] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [287.581082] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [287.582716] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [287.584414] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [287.586079] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [287.587583] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [287.589081] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [287.590226] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [287.591301] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [287.592293] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [287.593384] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [287.594412] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [287.595486] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [287.596519] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [287.597710] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [287.598872] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [287.600330] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [287.601559] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [287.602654] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [287.603679] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [287.604724] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [287.605760] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [287.606834] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [287.607822] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [287.608894] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [287.609906] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [287.611033] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [287.612327] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [287.613409] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [287.614444] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [287.615522] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset <7> [287.616756] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [287.617737] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [287.618747] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [287.619786] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [287.620755] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [287.621768] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [287.622892] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [287.623928] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [287.625334] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [287.627012] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [287.628528] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [287.630011] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [287.631476] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [287.632729] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:59:pipe A] allocated DPLL 0 <7> [287.633783] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:59:pipe A] reserving DPLL 0 <7> [287.634870] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: yes [modeset] <7> [287.635920] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [287.636976] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [287.638009] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [287.639096] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [287.640097] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [287.641124] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [287.642151] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [287.643392] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [287.644701] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [287.646220] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [287.647726] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [287.649153] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum hblank: 0 <7> [287.650142] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [287.651031] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [287.651721] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [287.652652] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [287.653659] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [287.654628] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [287.655620] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [287.656597] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [287.657385] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [287.658282] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [287.659007] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [287.659754] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [287.660498] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [287.661035] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [287.661546] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [287.662233] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [287.662985] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [287.663713] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pixel rate 373250, min cdclk 373250, min voltage level 0 <7> [287.664450] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [287.665151] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0 <7> [287.665838] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 3200x1800+0+0 <7> [287.666446] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [287.666917] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [287.667377] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [287.667824] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [287.668199] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [287.668615] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [287.669054] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [287.669471] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [287.669923] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [287.670324] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [287.670882] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [287.671485] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:112] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [287.672054] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [287.672645] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [287.673139] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no <7> [287.673542] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no <7> [287.685339] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [287.694406] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [287.695004] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [287.696163] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [287.696980] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [287.698235] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [287.699827] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A] <7> [287.700119] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B] <7> [287.700410] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A] <7> [287.700774] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B] <7> [287.701148] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C] <7> [287.701541] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C] <7> [287.701927] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A] <7> [287.702279] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B] <7> [287.702582] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C] <7> [287.703003] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:59:pipe A] <7> [287.703414] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [287.704049] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power on <7> [287.704574] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (129 ms remaining) <7> [287.841527] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [287.851398] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [287.851922] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power on <7> [287.852479] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003 <7> [287.902049] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [287.903295] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long <7> [287.904451] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [287.905725] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A] <7> [288.056797] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [288.058587] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [288.060942] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [288.066059] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turning VDD on <7> [288.067243] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b <7> [288.072601] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [288.073449] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [288.077026] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [288.078425] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [288.079693] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [288.083065] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Clock recovery OK <7> [288.084205] i915 0000:00:02.0: [drm:intel_dp_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [288.085463] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [288.089662] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [288.090910] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [288.092039] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [288.095568] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [288.096994] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [288.098220] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [288.102123] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [288.103264] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [288.105456] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [288.108671] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [288.109871] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [288.111699] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 37 <7> [288.141093] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [288.149682] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1] <7> [288.151078] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A] <7> [288.154894] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [288.157926] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <6> [288.159785] [IGT] i915_pm_rpm: starting subtest module-reload <7> [288.163516] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [288.165141] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [288.166164] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [288.168423] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [288.169968] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [288.170005] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [288.172028] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [288.178573] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [288.178622] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [288.180559] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [288.186737] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [288.189171] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [288.190733] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [288.192983] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [288.195095] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [288.195134] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [288.197116] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [288.203234] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [288.203262] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [288.306041] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [288.306936] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [288.319463] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [288.346043] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [288.346539] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [288.359465] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [288.445227] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [288.446234] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [288.453018] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [288.453389] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [288.453680] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [288.453961] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [288.454241] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [288.454760] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [288.455079] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [288.455419] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [288.455800] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [288.457157] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [288.532991] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [288.533757] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [288.534070] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [288.534413] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [288.536220] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:112] is removed <7> [288.536581] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [288.537007] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [288.537477] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [288.537918] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [288.538393] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [288.539651] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [288.540404] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [288.558033] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [288.558584] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [288.558927] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [288.559230] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [288.559560] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [288.559921] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [288.560446] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [288.560857] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [288.561277] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [288.561741] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [288.562152] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [288.562670] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [288.563134] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [288.563615] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [288.564090] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [288.564585] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [288.565030] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [288.565448] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [288.565888] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [288.566375] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [288.566837] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [288.567285] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [288.567761] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [288.568192] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [288.568636] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [288.568967] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [288.569291] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [288.569619] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [288.569940] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [288.570240] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [288.570575] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [288.570889] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [288.571185] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [288.571541] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [288.571872] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [288.572239] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [288.572588] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [288.572917] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [288.573216] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [288.573562] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [288.573884] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset <7> [288.574185] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:59:pipe A] releasing DPLL 0 <7> [288.574573] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [288.574909] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [288.575239] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [288.575563] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [288.575883] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [288.576195] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [288.576600] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [modeset] <7> [288.576918] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no <7> [288.577216] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no <7> [288.577654] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no <7> [288.578697] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [288.785654] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 0 <7> [288.789905] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [288.813909] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power off <7> [288.816082] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [288.817216] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - short <7> [288.818599] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power off time <7> [288.824792] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [288.871023] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [288.872272] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long <7> [288.873428] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [288.876463] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [288.879768] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:110:DDI A/PHY A] <7> [288.881251] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:59:pipe A] <7> [288.881378] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A] <7> [288.886222] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [288.888307] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [288.893674] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A] <7> [288.895672] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B] <7> [288.897512] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A] <7> [288.899249] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B] <7> [288.901001] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C] <7> [288.902699] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C] <7> [288.904446] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A] <7> [288.906179] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B] <7> [288.907912] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C] <7> [288.909649] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1] <7> [288.912959] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A] <7> [288.992159] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [289.033662] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:111:eDP-1] removing connector from sysfs <7> [289.076168] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:119:DP-1] removing connector from sysfs <7> [289.090231] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:128:HDMI-A-1] removing connector from sysfs <7> [289.108480] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:134:DP-2] removing connector from sysfs <7> [289.117778] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:140:HDMI-A-2] removing connector from sysfs <7> [289.142295] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (236 ms remaining) <7> [289.386063] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [289.460231] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [290.130366] [IGT] Reloading i915 w/o display <5> [291.085819] Setting dangerous option force_probe - tainting kernel <6> [291.100775] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0 <7> [291.102786] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K <7> [291.103335] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [291.103705] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH <7> [291.104040] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [291.104377] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [291.104969] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [291.105253] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [291.106535] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [291.106829] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [291.107110] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [291.107374] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [291.107384] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [291.108113] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [291.108156] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [291.108474] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [291.108779] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7713 MiB [mem 0x00000000-0x1e2176fff], io: n/a <7> [291.109030] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a <7> [291.110197] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018 <7> [291.110614] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [291.110905] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [291.111193] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [291.111499] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [291.119609] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [291.119927] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [291.120214] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [291.120582] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [291.121045] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [291.121528] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [291.122014] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no <7> [291.122481] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [291.122936] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [291.123392] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no <7> [291.123852] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes <7> [291.124313] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no <7> [291.124781] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3 <7> [291.125240] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [291.125706] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0 <7> [291.126161] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7> [291.127310] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [291.127679] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203 <7> [291.127988] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [291.128292] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [291.128654] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [291.129046] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [291.129399] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 850) <7> [291.129803] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [291.130149] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [291.130547] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [291.130887] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [291.131208] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136) <7> [291.131530] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [291.131879] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [291.132324] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [291.132679] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [291.133043] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [291.133346] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [291.133657] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [291.133972] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [291.134266] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [291.134581] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [291.134897] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [291.135263] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [291.135607] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [291.136092] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [291.136681] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [291.137187] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [291.138196] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [291.138633] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [291.139083] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [291.139546] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [291.140128] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [291.140486] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [291.140811] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [291.141215] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [291.141782] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [291.142242] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [291.142715] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [291.143127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [291.144235] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <7> [291.146360] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [291.146659] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [291.147280] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [291.147494] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [291.147796] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [291.148104] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [291.148286] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [291.148661] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <6> [291.149219] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [291.149066] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec) <7> [291.149407] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec) <7> [291.149749] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec) <7> [291.150051] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec) <7> [291.150339] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec) <7> [291.150673] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec) <7> [291.150988] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec) <7> [291.151287] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec) <7> [291.151608] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec) <7> [291.151926] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec) <7> [291.152222] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec) <7> [291.152552] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec) <7> [291.152904] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec) <7> [291.153201] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec) <7> [291.153560] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec) <7> [291.159145] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available. <7> [291.163456] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [291.163989] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:110:DDI A/PHY A] Using AUX CH A (VBT) <7> [291.164631] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:110:DDI A/PHY A] <7> [291.170554] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [291.171052] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [291.171711] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [291.172170] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [291.172763] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [291.173215] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [291.173749] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP <7> [291.174200] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [291.174935] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0 <7> [291.175392] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0 <7> [291.176052] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:110:DDI A/PHY A] initial power sequencer: PPS 0 <7> [291.177123] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [291.177795] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [291.178228] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [291.178744] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [291.179178] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [291.179725] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [291.181311] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turning VDD on <7> [291.181809] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [291.182178] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [291.192621] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [291.192975] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [291.193270] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [291.402696] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [291.406163] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [291.409946] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00 <7> [291.416719] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [291.441118] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [291.441179] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor <7> [291.441218] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0 <7> [291.441962] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:111:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [291.444356] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:111:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [291.445749] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:111:eDP-1] DRRS type: static <7> [291.448649] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:111:eDP-1] Using native PCH PWM for backlight control <7> [291.449822] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:111:eDP-1] backlight initialized, disabled, brightness 0/937 <7> [291.451637] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [291.452593] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [291.453560] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [291.454367] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [291.455100] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [291.455922] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [291.457296] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:118:DDI B/PHY B] Using AUX CH B (VBT) <7> [291.458042] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:118:DDI B/PHY B] <7> [291.459979] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [291.460592] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:118:DDI B/PHY B] <7> [291.461070] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:118:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [291.462254] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:133:DDI C/PHY C] Using AUX CH C (VBT) <7> [291.462831] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:133:DDI C/PHY C] <7> [291.464257] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [291.464904] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:133:DDI C/PHY C] <7> [291.465380] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:133:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [291.466613] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled <6> [291.467032] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem <7> [291.467594] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:59:pipe A] hw state readout: disabled <7> [291.468218] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:84:pipe B] hw state readout: disabled <7> [291.468971] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:109:pipe C] hw state readout: disabled <7> [291.469658] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:35:plane 1A] hw state readout: disabled, pipe A <7> [291.470320] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:44:plane 2A] hw state readout: disabled, pipe A <7> [291.470984] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:53:cursor A] hw state readout: disabled, pipe A <7> [291.471516] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] hw state readout: disabled, pipe B <7> [291.472078] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:69:plane 2B] hw state readout: disabled, pipe B <7> [291.472781] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:78:cursor B] hw state readout: disabled, pipe B <7> [291.473444] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:85:plane 1C] hw state readout: disabled, pipe C <7> [291.474115] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 2C] hw state readout: disabled, pipe C <7> [291.474561] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:103:cursor C] hw state readout: disabled, pipe C <7> [291.474939] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DDI A/PHY A] hw state readout: disabled, pipe A <7> [291.476208] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DDI B/PHY B] hw state readout: disabled, pipe A <7> [291.476746] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST A] hw state readout: disabled, pipe A <7> [291.477221] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST B] hw state readout: disabled, pipe B <7> [291.477599] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:122:DP-MST C] hw state readout: disabled, pipe C <7> [291.478005] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DDI C/PHY C] hw state readout: disabled, pipe A <7> [291.478439] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST A] hw state readout: disabled, pipe A <7> [291.478986] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST B] hw state readout: disabled, pipe B <7> [291.479507] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:137:DP-MST C] hw state readout: disabled, pipe C <7> [291.480071] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [291.480555] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [291.480943] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [291.481505] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [291.482191] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:111:eDP-1] hw state readout: disabled <7> [291.483183] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:119:DP-1] hw state readout: disabled <7> [291.483611] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:128:HDMI-A-1] hw state readout: disabled <7> [291.484139] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:134:DP-2] hw state readout: disabled <7> [291.484702] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:140:HDMI-A-2] hw state readout: disabled <7> [291.485165] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:35:plane 1A] min_cdclk 0 kHz <7> [291.485610] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:44:plane 2A] min_cdclk 0 kHz <7> [291.485970] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:53:cursor A] min_cdclk 0 kHz <7> [291.486293] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:59:pipe A] min_cdclk 0 kHz <7> [291.486769] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] min_cdclk 0 kHz <7> [291.487215] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:69:plane 2B] min_cdclk 0 kHz <7> [291.487677] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:78:cursor B] min_cdclk 0 kHz <7> [291.488129] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:84:pipe B] min_cdclk 0 kHz <7> [291.488583] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:85:plane 1C] min_cdclk 0 kHz <7> [291.488945] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 2C] min_cdclk 0 kHz <7> [291.489254] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:103:cursor C] min_cdclk 0 kHz <7> [291.489732] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:109:pipe C] min_cdclk 0 kHz <7> [291.490185] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:59:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [291.490641] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:84:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [291.491095] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:109:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [291.492284] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [setup_hw_state] <7> [291.492784] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:84:pipe B] enable: no [setup_hw_state] <7> [291.493237] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:109:pipe C] enable: no [setup_hw_state] <7> [291.493702] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [291.494192] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [291.494493] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [291.494917] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [291.495384] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7> [291.497904] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [291.498244] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [291.498615] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0 <7> [291.527011] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [291.527338] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [291.527793] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [291.528193] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [291.528522] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 0: start 0x8 <7> [291.528881] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 1: start 0x108 <7> [291.529188] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 2: start 0x208 <7> [291.529511] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 3: start 0x308 <7> [291.529869] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 4: start 0x3c8 <7> [291.530204] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 0: start 0x8 <7> [291.530538] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 1: start 0x108 <7> [291.530863] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 2: start 0x208 <7> [291.531223] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 3: start 0x308 <7> [291.531688] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 4: start 0x3c8 <7> [291.532141] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 0: start 0x8 <7> [291.532634] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 1: start 0x108 <7> [291.533045] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 2: start 0x208 <7> [291.533354] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 3: start 0x308 <7> [291.533708] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 4: start 0x3c8 <7> [291.534511] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [fastset] <7> [291.534973] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:84:pipe B] enable: no [fastset] <7> [291.535428] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:109:pipe C] enable: no [fastset] <7> [291.536074] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A] <7> [291.536824] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:84:pipe B] <7> [291.537307] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:109:pipe C] <7> [291.537841] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [291.543975] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:111:eDP-1] adding connector to sysfs <7> [291.545940] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:111:eDP-1] backlight device intel_backlight registered <7> [291.546400] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:111:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [291.547301] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [291.549830] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:111:eDP-1] generating connector hotplug event <7> [291.549944] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:119:DP-1] adding connector to sysfs <7> [291.552858] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [291.560937] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:119:DP-1] generating connector hotplug event <7> [291.561112] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:128:HDMI-A-1] adding connector to sysfs <7> [291.563207] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:128:HDMI-A-1] generating connector hotplug event <7> [291.563381] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:134:DP-2] adding connector to sysfs <7> [291.565536] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [291.568852] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:134:DP-2] generating connector hotplug event <7> [291.568998] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:140:HDMI-A-2] adding connector to sysfs <7> [291.570496] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:140:HDMI-A-2] generating connector hotplug event <6> [291.570635] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7> [291.576256] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [291.610299] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [291.622323] input: Video Bus as /devices/pci0000:00/acpi.video_bus.0/input/input35 <7> [291.626866] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [291.632054] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [291.632785] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:119:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [291.633253] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [291.634366] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:59:pipe A] not active, skipping <7> [291.634878] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:84:pipe B] not active, skipping <7> [291.635336] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:109:pipe C] not active, skipping <7> [291.635791] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config <7> [291.637170] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:128:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [291.637680] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [291.638114] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:134:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [291.639638] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [291.640731] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [291.640927] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [291.641400] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:140:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [291.643329] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] <7> [291.643348] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1] <7> [291.643851] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] status updated from unknown to disconnected <7> [291.643866] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] disconnected <7> [291.643878] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:111:eDP-1] EDID changed, epoch counter 2 <7> [291.643909] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] <7> [291.643920] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [291.644356] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected <7> [291.644369] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] <7> [291.644380] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [291.644845] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected <7> [291.644859] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] <7> [291.644871] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [291.645305] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected <7> [291.645318] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] <7> [291.645329] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [291.646393] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [291.650565] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [291.650715] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected <7> [291.650730] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [291.650740] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] enabled? no <7> [291.650749] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:DP-1] enabled? no <7> [291.650757] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-1] enabled? no <7> [291.650766] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:134:DP-2] enabled? no <7> [291.650774] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:140:HDMI-A-2] enabled? no <7> [291.650836] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [291.650857] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [291.650977] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [291.650992] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [291.655432] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9 <7> [291.656710] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [291.657829] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] <7> [291.657855] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1] <7> [291.658344] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] disconnected <7> [291.658371] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] <7> [291.658384] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [291.659764] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected <7> [291.659780] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] <7> [291.659791] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [291.660251] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected <7> [291.660265] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] <7> [291.660277] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [291.660789] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected <7> [291.660802] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] <7> [291.660813] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [291.661244] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected <7> [291.661255] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [291.661275] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] enabled? no <7> [291.661284] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:DP-1] enabled? no <7> [291.661292] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-1] enabled? no <7> [291.661300] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:134:DP-2] enabled? no <7> [291.661308] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:140:HDMI-A-2] enabled? no <7> [291.661598] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [291.661626] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0 <7> [291.662103] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7> [291.662584] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no <7> [291.663043] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no <7> [291.663557] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [291.663689] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [291.663721] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [291.663852] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [291.663918] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [291.664051] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] <7> [291.664064] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1] <7> [291.664505] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] disconnected <7> [291.664520] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] <7> [291.664530] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [291.664949] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected <7> [291.664963] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] <7> [291.664974] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [291.665401] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected <7> [291.665415] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] <7> [291.665426] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [291.665867] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected <7> [291.665880] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] <7> [291.665891] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [291.666330] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected <7> [291.666341] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [291.666350] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] enabled? no <7> [291.666358] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:DP-1] enabled? no <7> [291.666366] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-1] enabled? no <7> [291.666374] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:134:DP-2] enabled? no <7> [291.666382] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:140:HDMI-A-2] enabled? no <7> [291.666435] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [291.666455] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [291.667238] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [291.667265] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [291.667377] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [291.667405] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7> [291.667908] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7> [291.668365] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no <7> [291.668839] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7> [291.669299] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7> [291.669779] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7> [291.670229] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7> [291.670707] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7> [291.671155] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7> [291.671627] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7> [291.672084] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes <7> [291.672615] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7> [291.673076] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7> [291.673537] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7> [291.673987] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7> [291.674441] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no <7> [291.674905] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz <7> [291.676529] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7> [291.676985] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [291.677459] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [291.677942] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [291.678416] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [291.678898] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [291.679733] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9 <7> [291.680134] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9 <7> [291.680536] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9 <7> [291.680925] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0 <7> [291.681316] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0 <7> [291.681711] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2 <7> [291.682105] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21 <7> [291.682501] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000 <7> [291.682887] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE <7> [291.683272] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7> [291.683676] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7> [291.684070] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39 <7> [291.684459] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7> [291.684930] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7> [291.685204] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7> [291.685512] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7> [291.685889] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7> [291.686272] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7> [291.686683] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7> [291.687064] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7> [291.687449] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7> [291.687846] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no <7> [291.688216] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no <7> [291.688502] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7> [291.688774] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7> [291.689149] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7> [291.689540] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no <7> [291.689921] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no <7> [291.690303] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7> [291.690704] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7> [291.691088] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes <7> [291.691460] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7> [291.691833] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no <7> [291.692100] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7> [291.692457] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7> [291.692867] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no <7> [291.693253] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no <7> [291.693647] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no <7> [291.694036] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7> [291.694421] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no <7> [291.694821] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7> [291.695210] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7> [291.695597] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7> [291.695935] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7> [291.696289] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no <7> [291.696671] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes <7> [291.697044] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7> [291.697425] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7> [291.697812] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7> [291.698196] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7> [291.698585] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7> [291.698973] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403 <7> [291.699347] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001 <7> [291.699742] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3 <7> [291.700119] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007 <7> [291.700522] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000 <7> [291.700909] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000 <7> [291.701295] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24 <7> [291.701693] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8 <7> [291.702078] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7> [291.702463] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7> [291.702765] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes <6> [291.703019] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [291.703022] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [291.703024] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [291.718277] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6> [291.719986] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7> [291.720705] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [291.722015] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [291.724966] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [291.765227] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [291.766237] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [291.767046] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [291.767455] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [291.767894] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [291.768938] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [291.769349] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [291.769767] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [291.770175] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <6> [291.803725] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36 <6> [291.812307] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input37 <6> [291.820952] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input38 <7> [292.901655] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [293.981390] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turning VDD off <7> [293.981795] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [293.982092] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [293.982512] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [293.983199] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [293.984127] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [293.984243] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [293.984563] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long <7> [293.984917] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [293.985364] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [293.985741] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A] <7> [293.991735] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [294.033497] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [294.059770] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [294.072132] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [294.074477] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [294.075330] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [294.075347] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [294.076124] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [294.076489] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [294.076870] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [294.077519] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [294.078393] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [294.079659] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [294.092756] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [294.093362] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [294.093953] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [294.094781] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [294.096001] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [294.228557] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [294.229023] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [294.230110] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [294.231406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [294.232567] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [294.240015] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [294.240330] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [294.240764] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [294.241150] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [294.241414] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [294.241734] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [294.242033] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [294.242293] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [294.242565] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [294.243571] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [294.245260] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [294.245724] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [294.246139] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [294.246974] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [294.322550] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [294.322967] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [294.324279] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [294.325124] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [294.325934] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [294.326474] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [294.327069] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [294.327633] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [294.328201] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [294.363062] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [294.382509] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:111:eDP-1] removing connector from sysfs <7> [294.395351] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:119:DP-1] removing connector from sysfs <7> [294.402142] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:128:HDMI-A-1] removing connector from sysfs <7> [294.414820] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:134:DP-2] removing connector from sysfs <7> [294.423547] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:140:HDMI-A-2] removing connector from sysfs <7> [294.456093] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (27 ms remaining) <7> [294.485844] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [294.495776] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [294.988554] [IGT] Reloading i915 as normal <5> [295.940689] Setting dangerous option force_probe - tainting kernel <6> [295.955210] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0 <7> [295.957295] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K <7> [295.957806] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [295.958165] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH <7> [295.958468] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [295.958871] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [295.959387] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [295.959698] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [295.961105] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [295.961402] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [295.961695] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [295.962024] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [295.962035] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [295.962819] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [295.962874] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [295.963210] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [295.963570] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7713 MiB [mem 0x00000000-0x1e2176fff], io: n/a <7> [295.963970] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a <7> [295.965550] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018 <7> [295.965969] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [295.966269] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [295.966695] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [295.967130] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [295.975724] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [295.976053] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [295.976349] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [295.976645] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [295.976991] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [295.977466] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [295.977962] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no <7> [295.978438] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [295.978928] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [295.979402] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no <7> [295.979895] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes <7> [295.980367] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no <7> [295.980854] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3 <7> [295.981324] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [295.981818] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0 <7> [295.982293] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7> [295.983497] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [295.983886] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203 <7> [295.984205] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [295.984523] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [295.984867] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [295.985236] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [295.985562] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 850) <7> [295.986017] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [295.986373] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [295.986727] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [295.987088] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [295.987404] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136) <7> [295.987728] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [295.988086] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [295.988389] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [295.988832] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [295.989204] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [295.989528] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [295.989993] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [295.990443] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [295.990916] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [295.991368] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [295.991766] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [295.992117] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [295.992518] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [295.993015] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [295.993576] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [295.994105] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [295.994482] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [295.994815] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [295.995248] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [295.995697] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [295.996259] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [295.996656] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [295.997572] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [295.998078] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [295.998631] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [295.999105] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [295.999529] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [295.999870] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [296.001068] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <7> [296.003257] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [296.003521] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [296.004151] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [296.004372] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [296.004629] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [296.005120] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <6> [296.006001] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [296.006818] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [296.007176] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7> [296.007479] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec) <7> [296.007830] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec) <7> [296.008180] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec) <7> [296.008569] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec) <7> [296.009024] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec) <7> [296.009462] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec) <7> [296.009913] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec) <7> [296.010337] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec) <7> [296.010638] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec) <7> [296.010950] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec) <7> [296.011371] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec) <7> [296.011822] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec) <7> [296.012267] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec) <7> [296.012726] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec) <7> [296.013172] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec) <7> [296.018933] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available. <7> [296.024405] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [296.024965] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:110:DDI A/PHY A] Using AUX CH A (VBT) <7> [296.025462] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:110:DDI A/PHY A] <7> [296.032633] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [296.033147] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [296.033597] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [296.034285] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [296.034802] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [296.035275] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [296.035936] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP <7> [296.036395] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [296.037048] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0 <7> [296.037520] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0 <7> [296.038197] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:110:DDI A/PHY A] initial power sequencer: PPS 0 <7> [296.039412] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [296.039905] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [296.040350] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [296.040802] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [296.041244] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [296.041750] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [296.042504] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turning VDD on <7> [296.043012] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [296.043503] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [296.053839] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [296.054201] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [296.054495] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [296.258833] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [296.261816] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [296.263860] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00 <7> [296.270044] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [296.288048] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [296.288101] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor <7> [296.288133] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0 <7> [296.288558] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:111:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [296.290019] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:111:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [296.292251] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:111:eDP-1] DRRS type: static <7> [296.296676] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:111:eDP-1] Using native PCH PWM for backlight control <7> [296.298963] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:111:eDP-1] backlight initialized, disabled, brightness 0/937 <7> [296.301992] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [296.303987] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [296.305961] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [296.308081] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [296.310178] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [296.312356] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [296.316385] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:118:DDI B/PHY B] Using AUX CH B (VBT) <7> [296.318831] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:118:DDI B/PHY B] <7> [296.325523] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [296.327928] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:118:DDI B/PHY B] <7> [296.330081] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:118:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [296.334968] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:133:DDI C/PHY C] Using AUX CH C (VBT) <7> [296.337204] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:133:DDI C/PHY C] <7> [296.344383] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [296.346867] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:133:DDI C/PHY C] <7> [296.348994] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:133:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [296.354125] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled <6> [296.356467] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem <7> [296.357871] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:59:pipe A] hw state readout: disabled <7> [296.361191] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:84:pipe B] hw state readout: disabled <7> [296.364509] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:109:pipe C] hw state readout: disabled <7> [296.366974] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:35:plane 1A] hw state readout: disabled, pipe A <7> [296.369376] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:44:plane 2A] hw state readout: disabled, pipe A <7> [296.370978] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:53:cursor A] hw state readout: disabled, pipe A <7> [296.372343] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] hw state readout: disabled, pipe B <7> [296.373679] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:69:plane 2B] hw state readout: disabled, pipe B <7> [296.375029] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:78:cursor B] hw state readout: disabled, pipe B <7> [296.376360] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:85:plane 1C] hw state readout: disabled, pipe C <7> [296.377717] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 2C] hw state readout: disabled, pipe C <7> [296.379072] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:103:cursor C] hw state readout: disabled, pipe C <7> [296.380049] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DDI A/PHY A] hw state readout: disabled, pipe A <7> [296.381021] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DDI B/PHY B] hw state readout: disabled, pipe A <7> [296.381925] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST A] hw state readout: disabled, pipe A <7> [296.382815] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST B] hw state readout: disabled, pipe B <7> [296.383712] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:122:DP-MST C] hw state readout: disabled, pipe C <7> [296.384666] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DDI C/PHY C] hw state readout: disabled, pipe A <7> [296.385584] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST A] hw state readout: disabled, pipe A <7> [296.386488] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST B] hw state readout: disabled, pipe B <7> [296.387377] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:137:DP-MST C] hw state readout: disabled, pipe C <7> [296.388322] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [296.389109] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [296.389886] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [296.390647] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [296.391596] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:111:eDP-1] hw state readout: disabled <7> [296.392444] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:119:DP-1] hw state readout: disabled <7> [296.393300] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:128:HDMI-A-1] hw state readout: disabled <7> [296.394138] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:134:DP-2] hw state readout: disabled <7> [296.394980] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:140:HDMI-A-2] hw state readout: disabled <7> [296.395675] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:35:plane 1A] min_cdclk 0 kHz <7> [296.396411] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:44:plane 2A] min_cdclk 0 kHz <7> [296.396993] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:53:cursor A] min_cdclk 0 kHz <7> [296.397408] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:59:pipe A] min_cdclk 0 kHz <7> [296.397844] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] min_cdclk 0 kHz <7> [296.398281] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:69:plane 2B] min_cdclk 0 kHz <7> [296.398655] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:78:cursor B] min_cdclk 0 kHz <7> [296.399058] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:84:pipe B] min_cdclk 0 kHz <7> [296.399494] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:85:plane 1C] min_cdclk 0 kHz <7> [296.399892] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 2C] min_cdclk 0 kHz <7> [296.400327] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:103:cursor C] min_cdclk 0 kHz <7> [296.400725] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:109:pipe C] min_cdclk 0 kHz <7> [296.401177] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:59:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [296.401546] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:84:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [296.401986] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:109:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [296.402916] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [setup_hw_state] <7> [296.403474] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:84:pipe B] enable: no [setup_hw_state] <7> [296.404117] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:109:pipe C] enable: no [setup_hw_state] <7> [296.404615] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [296.405158] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [296.405516] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [296.405901] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [296.406338] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7> [296.409296] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [296.409657] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [296.410035] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0 <7> [296.437644] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [296.438071] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [296.438315] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [296.438555] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [296.438816] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 0: start 0x8 <7> [296.439174] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 1: start 0x108 <7> [296.439463] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 2: start 0x208 <7> [296.439776] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 3: start 0x308 <7> [296.440127] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 4: start 0x3c8 <7> [296.440423] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 0: start 0x8 <7> [296.440738] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 1: start 0x108 <7> [296.441136] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 2: start 0x208 <7> [296.441585] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 3: start 0x308 <7> [296.441998] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 4: start 0x3c8 <7> [296.442308] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 0: start 0x8 <7> [296.442616] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 1: start 0x108 <7> [296.443039] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 2: start 0x208 <7> [296.443359] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 3: start 0x308 <7> [296.443667] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 4: start 0x3c8 <7> [296.444368] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [fastset] <7> [296.444705] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:84:pipe B] enable: no [fastset] <7> [296.445020] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:109:pipe C] enable: no [fastset] <7> [296.445539] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A] <7> [296.446271] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:84:pipe B] <7> [296.446816] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:109:pipe C] <7> [296.447308] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [296.455172] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:111:eDP-1] adding connector to sysfs <7> [296.457251] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:111:eDP-1] backlight device intel_backlight registered <7> [296.457799] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:111:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [296.459068] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [296.462178] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:111:eDP-1] generating connector hotplug event <7> [296.462350] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:119:DP-1] adding connector to sysfs <7> [296.464021] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [296.466119] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:119:DP-1] generating connector hotplug event <7> [296.466276] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:128:HDMI-A-1] adding connector to sysfs <7> [296.467371] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:128:HDMI-A-1] generating connector hotplug event <7> [296.467537] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:134:DP-2] adding connector to sysfs <7> [296.469201] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [296.472081] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:134:DP-2] generating connector hotplug event <7> [296.472211] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:140:HDMI-A-2] adding connector to sysfs <7> [296.473298] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:140:HDMI-A-2] generating connector hotplug event <6> [296.473427] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7> [296.481660] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [296.520679] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [296.532388] input: Video Bus as /devices/pci0000:00/acpi.video_bus.0/input/input39 <7> [296.535304] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [296.540428] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [296.542604] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:59:pipe A] not active, skipping <7> [296.543136] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:84:pipe B] not active, skipping <7> [296.543568] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:109:pipe C] not active, skipping <7> [296.544619] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config <7> [296.545447] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [296.546030] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:119:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [296.546526] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [296.547676] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [296.548193] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [296.548801] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [296.549297] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [296.549309] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [296.549765] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [296.552804] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [296.555182] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [296.555197] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [296.555799] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:128:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [296.556279] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [296.560858] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:134:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [296.561276] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [296.561860] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [296.562295] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [296.562955] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [296.563429] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [296.563441] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [296.563894] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [296.567339] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [296.567352] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [296.567851] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:140:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [296.569391] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [296.571616] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] <7> [296.571636] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1] <7> [296.572442] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [296.572927] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [296.573374] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [296.575027] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [296.575042] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor <7> [296.575053] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0 <7> [296.575103] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no <7> [296.575593] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [296.576151] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [296.578353] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] status updated from unknown to connected <7> [296.578592] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes: <7> [296.578603] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [296.578615] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [296.578629] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] <7> [296.578641] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [296.579171] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [296.583529] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected <7> [296.583548] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] <7> [296.583560] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [296.585422] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [296.586062] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [296.586692] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [296.587487] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [296.587500] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [296.588161] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [296.593044] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [296.593061] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [296.593584] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected <7> [296.593600] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] <7> [296.593612] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [296.598668] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected <7> [296.598687] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] <7> [296.598741] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [296.599506] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [296.599983] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [296.600620] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [296.601114] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [296.601126] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [296.601576] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [296.605088] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [296.605103] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [296.605589] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected <7> [296.605604] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] enabled? yes <7> [296.605614] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:DP-1] enabled? no <7> [296.605622] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-1] enabled? no <7> [296.605630] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:134:DP-2] enabled? no <7> [296.605638] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:140:HDMI-A-2] enabled? no <7> [296.605725] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [296.605763] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] found preferred mode: 3200x1800 <7> [296.605772] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [296.605806] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:59:pipe A] desired mode 3200x1800 set (0,0) <7> [296.605945] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [296.606002] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] no BIOS fb, allocating a new one <7> [296.613270] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 3200x1800 fb <6> [296.616092] fbcon: i915drmfb (fb0) is primary device <6> [296.617996] Console: switching to colour frame buffer device 200x56 <6> [296.618016] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7> [296.618043] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9 <7> [296.618546] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0 <7> [296.619058] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7> [296.619556] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no <7> [296.620398] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [296.620417] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [296.620263] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no <7> [296.620733] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7> [296.621162] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] <7> [296.621187] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1] <7> [296.621198] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7> [296.621653] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no <7> [296.622124] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7> [296.622592] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7> [296.623138] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7> [296.623601] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7> [296.624073] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7> [296.624319] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [296.624535] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7> [296.624802] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [296.625007] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7> [296.625242] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [296.625463] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes <7> [296.626033] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7> [296.626506] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7> [296.626973] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7> [296.627432] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7> [296.627897] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no <7> [296.628345] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz <7> [296.629964] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7> [296.630434] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [296.630680] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [296.630750] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor <7> [296.630770] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0 <7> [296.630843] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no <7> [296.630936] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [296.631296] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [296.631414] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [296.631757] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [296.631904] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [296.632304] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [296.633061] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9 <7> [296.633458] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9 <7> [296.634029] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9 <7> [296.634433] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0 <7> [296.634926] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0 <7> [296.635321] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2 <7> [296.635723] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21 <7> [296.636092] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000 <7> [296.636463] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE <7> [296.636861] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7> [296.637243] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7> [296.637624] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39 <7> [296.638017] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7> [296.638400] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7> [296.639284] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7> [296.639727] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes: <7> [296.639751] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [296.639765] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [296.639779] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] <7> [296.639681] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7> [296.639791] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [296.640092] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7> [296.640474] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7> [296.640869] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7> [296.641261] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7> [296.641636] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7> [296.642041] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no <7> [296.642429] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no <7> [296.642833] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7> [296.643217] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7> [296.643602] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7> [296.643998] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no <7> [296.644369] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected <7> [296.644390] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] <7> [296.644382] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no <7> [296.644403] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [296.644785] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7> [296.645165] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7> [296.645550] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes <7> [296.645952] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7> [296.646353] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no <7> [296.647081] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [296.647563] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [296.648291] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [296.649470] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [296.649484] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [296.649777] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7> [296.649970] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [296.650182] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7> [296.650562] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no <7> [296.650969] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no <7> [296.651354] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no <7> [296.651778] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7> [296.652164] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no <7> [296.652550] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7> [296.652953] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7> [296.653341] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7> [296.654545] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7> [296.655018] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no <7> [296.655402] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes <7> [296.655785] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7> [296.656159] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [296.656175] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [296.656229] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7> [296.656685] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected <7> [296.656730] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] <7> [296.656614] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7> [296.656744] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [296.657002] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7> [296.657377] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7> [296.657770] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403 <7> [296.658156] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001 <7> [296.659622] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3 <7> [296.660053] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007 <7> [296.660446] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000 <7> [296.661052] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000 <7> [296.661443] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24 <7> [296.661633] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected <7> [296.661653] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] <7> [296.661665] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [296.662470] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [296.662929] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [296.663563] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [296.663658] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8 <7> [296.664055] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7> [296.664441] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7> [296.664828] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [296.664866] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes <7> [296.664842] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <6> [296.665255] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [296.665259] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [296.665263] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [296.665286] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [296.670332] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [296.670348] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [296.671350] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected <7> [296.671368] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] enabled? yes <7> [296.671378] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:DP-1] enabled? no <7> [296.671387] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-1] enabled? no <7> [296.671396] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:134:DP-2] enabled? no <7> [296.671404] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:140:HDMI-A-2] enabled? no <7> [296.672385] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [296.672467] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] found preferred mode: 3200x1800 <7> [296.672478] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [296.672559] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:59:pipe A] desired mode 3200x1800 set (0,0) <7> [296.678377] i915 0000:00:02.0: [drm:compute_baseline_pipe_bpp [i915]] [CONNECTOR:111:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [296.678886] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:110:DDI A/PHY A][CRTC:59:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [296.679899] i915 0000:00:02.0: [drm:intel_dp_compute_output_format [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000 <7> [296.680347] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [296.680845] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:110:DDI A/PHY A] [CRTC:59:pipe A] <7> [296.681251] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [296.681797] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [296.682222] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [296.682646] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [296.683666] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [296.684485] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [296.684952] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [296.685382] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [296.685938] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [296.686371] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [296.686817] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [296.687255] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [296.687681] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [296.690283] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [296.690833] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [296.691238] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [296.691669] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [296.692110] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [296.692534] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [296.692977] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [296.693392] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [296.693852] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [296.694276] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [296.694717] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [296.695135] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [296.695553] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [296.696527] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [296.697281] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [296.697798] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [296.698219] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [296.698640] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [296.699206] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [296.699639] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [296.700121] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [296.700566] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <6> [296.702287] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7> [296.703168] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dpll_hw_state <7> [296.703627] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [296.704156] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 <7> [296.704578] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [296.705031] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [296.705456] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [296.705915] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [296.706334] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [296.706899] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [296.707335] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset <7> [296.707879] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [296.708308] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [296.709420] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [296.710182] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [296.710672] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [296.711219] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [296.711628] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [296.712090] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [296.712587] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [296.715258] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [296.715727] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [296.716138] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [296.716564] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [296.717145] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:59:pipe A] allocated DPLL 0 <7> [296.717561] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:59:pipe A] reserving DPLL 0 <7> [296.718020] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: yes [modeset] <7> [296.718431] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [296.718884] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [296.719305] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [296.719763] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [296.720176] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [296.720597] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [296.721093] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [296.721507] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [296.721946] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [296.722361] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [296.722789] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [296.725756] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum hblank: 0 <7> [296.726204] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [296.726631] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [296.727176] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [296.727596] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [296.728043] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [296.728455] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [296.728893] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [296.729300] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [296.729738] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [296.730147] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [296.730564] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [296.731003] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [296.731415] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [296.731854] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [296.732264] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [296.732676] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [296.733112] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [296.733441] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pixel rate 373250, min cdclk 373250, min voltage level 0 <7> [296.734578] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [296.735042] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0 <7> [296.735456] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 3200x1800+0+0 <7> [296.737065] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [296.737515] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [296.737954] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [296.738362] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [296.738802] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [296.739329] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [296.739768] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [296.740181] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [296.740595] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [296.741043] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [296.741464] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [296.741905] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:112] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [296.742321] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [296.742865] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [296.743296] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no <7> [296.743753] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no <7> [296.744958] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [296.746698] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A] <7> [296.747178] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B] <7> [296.747603] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A] <7> [296.748115] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B] <7> [296.748540] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C] <7> [296.748984] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C] <7> [296.749391] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A] <7> [296.750716] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B] <7> [296.751151] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C] <7> [296.754739] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:59:pipe A] <7> [296.755204] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [296.756435] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power on <7> [296.757388] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [296.758666] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [296.770002] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [296.770456] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power on <7> [296.770925] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000000b <7> [296.980385] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [296.982588] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [296.985568] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [296.995623] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [296.996944] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [297.004373] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [297.006446] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [297.008401] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [297.014951] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Clock recovery OK <7> [297.016914] i915 0000:00:02.0: [drm:intel_dp_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [297.018816] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [297.024048] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [297.026025] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [297.027982] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [297.033105] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [297.035006] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [297.038471] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [297.042876] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [297.044561] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [297.049076] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 37 <7> [297.063164] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 487 us, max time under evasion is 250 us <7> [297.075398] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [297.084551] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1] <7> [297.086327] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A] <7> [297.092524] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <6> [297.105166] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7> [297.106431] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [297.109039] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [297.109069] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [297.109384] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] <7> [297.109207] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [297.109421] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1] <7> [297.117205] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [297.126167] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [297.127012] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [297.129777] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [297.130432] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [297.131202] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [297.131225] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor <7> [297.131242] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0 <7> [297.131304] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no <7> [297.132052] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [297.132459] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [297.134636] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes: <7> [297.134654] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [297.134671] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [297.134687] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] <7> [297.134702] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [297.139440] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected <7> [297.139459] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] <7> [297.139470] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [297.140534] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [297.140929] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [297.141404] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [297.142234] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [297.142248] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [297.142670] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [297.145982] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [297.145995] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [297.146338] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected <7> [297.146351] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] <7> [297.146360] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [297.150748] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected <7> [297.150766] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] <7> [297.150778] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [297.151401] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [297.151802] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [297.152356] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [297.152781] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [297.152794] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [297.153150] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [297.157112] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [297.157128] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [297.158114] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected <7> [297.158129] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] enabled? yes <7> [297.158139] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:DP-1] enabled? no <7> [297.158146] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-1] enabled? no <7> [297.158154] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:134:DP-2] enabled? no <7> [297.158162] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:140:HDMI-A-2] enabled? no <7> [297.158230] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [297.158259] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] found preferred mode: 3200x1800 <7> [297.158267] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [297.158710] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:59:pipe A] desired mode 3200x1800 set (0,0) <7> [297.159556] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [297.160217] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] <7> [297.160228] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1] <7> [297.160740] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [297.161048] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [297.161303] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [297.161614] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [297.161623] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor <7> [297.161630] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0 <7> [297.161663] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no <7> [297.162497] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [297.162845] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [297.165481] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes: <7> [297.165493] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [297.165501] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [297.165621] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] <7> [297.165629] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [297.170147] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected <7> [297.170269] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] <7> [297.170280] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [297.171275] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [297.171703] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [297.172319] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [297.173252] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [297.173263] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [297.173666] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [297.177049] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [297.177063] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [297.177526] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected <7> [297.177662] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] <7> [297.177673] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [297.180714] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [297.181509] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [297.182205] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected <7> [297.182329] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] <7> [297.182341] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [297.183042] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [297.183440] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [297.184014] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [297.184409] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [297.184419] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [297.184803] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [297.184803] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [297.185238] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [297.185625] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [297.186044] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [297.186443] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [297.187343] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [297.188057] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [297.187917] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [297.188071] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [297.188510] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected <7> [297.195324] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] <7> [297.195341] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [297.199935] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected <7> [297.200977] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] <7> [297.200993] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [297.201708] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [297.202177] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [297.202989] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [297.203492] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [297.203503] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [297.204151] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [297.207453] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [297.207468] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [297.207961] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected <7> [297.208873] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] <7> [297.208883] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [297.213518] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected <7> [297.214554] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] <7> [297.214571] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [297.215329] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [297.217734] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [297.218346] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [297.218833] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [297.218845] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [297.219258] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [297.222553] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [297.222566] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [297.223117] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected <7> [297.223783] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] <7> [297.223796] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1] <7> [297.224300] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [297.224717] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [297.225126] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [297.225581] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [297.225594] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor <7> [297.225604] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0 <7> [297.225666] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no <7> [297.226086] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [297.226487] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [297.228081] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes: <7> [297.228095] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [297.228107] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [297.228155] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] <7> [297.228166] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [297.232773] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected <7> [297.232828] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] <7> [297.232842] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [297.233561] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [297.234035] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [297.234621] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [297.235103] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [297.235114] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [297.235531] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [297.239112] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [297.239125] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [297.239611] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected <7> [297.239663] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] <7> [297.239673] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <6> [297.240259] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input40 <7> [297.244300] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected <7> [297.244356] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] <7> [297.244368] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [297.245112] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [297.245538] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [297.246154] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [297.249362] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [297.249376] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [297.249905] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <6> [297.251706] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input41 <7> [297.256808] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [297.256825] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [297.258352] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected <6> [297.259174] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input42 <7> [297.263122] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:144] <7> [298.313335] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:59:pipe A] <7> [298.313988] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [298.315611] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [298.315938] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [298.316381] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [298.316831] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [298.317264] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [298.317691] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [298.318153] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [298.318580] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [298.319023] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [298.319459] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [298.319907] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [298.320341] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [298.320779] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [298.321214] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [298.321663] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [298.322130] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [298.322573] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [298.323025] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [298.323466] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [298.323916] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [298.324366] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [298.324828] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [298.325269] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [298.325702] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [298.326151] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [298.326530] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [298.326985] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [298.327434] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [298.327899] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [298.328343] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [298.328803] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [298.329253] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [298.329693] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [298.330160] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [298.330610] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [298.331066] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [298.331510] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [298.331959] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [298.332400] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset <7> [298.332880] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:59:pipe A] releasing DPLL 0 <7> [298.333368] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [298.333866] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [298.334291] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [298.334725] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [298.335177] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [298.335608] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [298.336038] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [298.336447] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [298.336950] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [298.337454] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz <7> [298.337946] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [298.338361] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [298.338825] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [298.339141] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [modeset] <7> [298.339410] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no <7> [298.339674] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no <7> [298.340094] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no <7> [298.340534] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [298.343090] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [298.419287] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [298.546236] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 0 <7> [298.550696] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [298.559648] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power off <7> [298.560027] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power off time <7> [298.560339] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [298.560652] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - short <7> [298.561532] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [298.611938] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [298.612255] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [298.613564] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long <7> [298.614673] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [298.615082] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [298.623981] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:110:DDI A/PHY A] <7> [298.624399] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:59:pipe A] <7> [298.625276] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A] <7> [298.626681] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [298.628520] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [298.633379] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A] <7> [298.635289] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B] <7> [298.636943] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A] <7> [298.638452] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B] <7> [298.639976] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C] <7> [298.641553] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C] <7> [298.643274] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A] <7> [298.644964] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B] <7> [298.646449] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C] <7> [298.647918] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1] <7> [298.650849] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A] <7> [298.654875] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:84:pipe B] <7> [298.656507] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:109:pipe C] <7> [298.754476] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [298.756405] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [298.757586] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [298.761623] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [298.764489] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [298.786496] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [298.876381] i915 0000:00:02.0: [drm:compute_baseline_pipe_bpp [i915]] [CONNECTOR:111:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [298.877603] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:110:DDI A/PHY A][CRTC:59:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [298.878668] i915 0000:00:02.0: [drm:intel_dp_compute_output_format [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000 <7> [298.880938] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [298.882322] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:110:DDI A/PHY A] [CRTC:59:pipe A] <7> [298.883628] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [298.885048] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [298.886598] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [298.888082] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [298.889148] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [298.890399] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [298.891412] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [298.892733] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [298.893833] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [298.895014] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [298.896054] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [298.897460] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [298.898713] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [298.900399] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [298.902027] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [298.903634] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [298.905115] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [298.906659] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [298.907836] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [298.909396] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [298.910967] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [298.912474] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [298.913975] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [298.915409] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [298.916855] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [298.918300] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [298.919846] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [298.921347] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [298.922866] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [298.924137] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [298.925140] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [298.926370] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [298.927875] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [298.929352] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [298.930866] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [298.932340] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [298.933825] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [298.935023] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [298.936419] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [298.937934] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset <7> [298.939660] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [298.941100] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [298.942519] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [298.943967] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [298.945179] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [298.946363] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [298.947355] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [298.948480] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [298.949640] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [298.950926] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [298.952127] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [298.953318] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [298.954597] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [298.955673] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:59:pipe A] allocated DPLL 0 <7> [298.956899] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:59:pipe A] reserving DPLL 0 <7> [298.957916] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: yes [modeset] <7> [298.959164] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [298.960197] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [298.961349] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [298.962539] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [298.963660] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [298.964659] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [298.965847] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [298.966782] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [298.967830] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [298.969036] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [298.970094] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [298.971295] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum hblank: 0 <7> [298.972692] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [298.973898] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [298.974905] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [298.975948] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [298.976967] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [298.978018] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [298.979014] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [298.980048] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [298.981079] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [298.982205] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [298.983510] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [298.984673] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [298.985685] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [298.986952] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [298.987966] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [298.989167] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [298.990199] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [298.991352] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pixel rate 373250, min cdclk 373250, min voltage level 0 <7> [298.992335] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [298.993178] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0 <7> [298.993958] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 3200x1800+0+0 <7> [298.994952] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [298.995940] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [298.996927] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [298.997903] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [298.998555] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [298.999226] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [299.000179] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [299.001128] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [299.001861] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [299.002569] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [299.003226] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [299.003938] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:112] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [299.004632] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [299.005388] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [299.006132] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no <7> [299.006890] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no <7> [299.018944] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [299.028484] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [299.029275] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [299.031786] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [299.033353] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [299.034185] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [299.035755] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A] <7> [299.036300] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B] <7> [299.036765] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A] <7> [299.037214] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B] <7> [299.037547] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C] <7> [299.037893] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C] <7> [299.038345] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A] <7> [299.038842] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B] <7> [299.039303] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C] <7> [299.040094] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:59:pipe A] <7> [299.040467] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [299.041040] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power on <7> [299.041669] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (73 ms remaining) <7> [299.122077] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [299.172101] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [299.174891] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power on <7> [299.176599] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003 <7> [299.225030] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [299.226129] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long <7> [299.227141] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [299.228252] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A] <7> [299.381940] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [299.383149] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [299.384467] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [299.390765] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turning VDD on <7> [299.391938] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b <7> [299.398446] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [299.399718] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [299.405321] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [299.406901] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [299.408447] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [299.412096] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Clock recovery OK <7> [299.413515] i915 0000:00:02.0: [drm:intel_dp_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [299.415076] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [299.421758] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [299.423263] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [299.424757] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [299.429358] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [299.430840] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [299.433484] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [299.437073] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [299.438593] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [299.440596] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 37 <7> [299.454157] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 378 us, max time under evasion is 250 us <7> [299.469640] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [299.478173] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1] <7> [299.479598] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A] <7> [299.483870] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [299.487015] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [299.492236] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [299.494000] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [299.495684] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [299.497692] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [299.500712] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [299.500753] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [299.502771] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [299.508877] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [299.508912] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [299.516270] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [299.521991] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [299.523463] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [299.524467] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [299.526608] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [299.528666] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [299.528703] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [299.530632] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [299.536597] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [299.536640] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [299.635596] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [299.636497] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [299.650014] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [299.676580] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [299.677074] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [299.689980] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [299.760334] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [299.761718] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [299.770861] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [299.771336] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [299.771725] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [299.772224] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [299.772651] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [299.773698] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [299.774661] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [299.775316] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [299.775880] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [299.777077] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [299.865952] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [299.867582] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [299.868165] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [299.868599] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <6> [299.872141] Console: switching to colour dummy device 80x25 <7> [299.872382] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:112] is removed <7> [299.872517] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [299.877507] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [299.878213] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [299.879027] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [299.879840] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [299.880600] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [299.883167] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [299.903203] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [299.903956] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [299.904750] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [299.906973] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [299.907673] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [299.908461] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [299.909261] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [299.910076] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [299.910855] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [299.911610] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [299.912420] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [299.913221] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [299.913962] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [299.914749] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [299.915588] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [299.916380] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [299.917206] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [299.918026] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [299.918805] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [299.919608] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [299.920406] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [299.921207] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [299.922010] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [299.922792] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [299.923590] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [299.924383] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [299.925192] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [299.925985] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [299.926758] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [299.927558] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [299.928365] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [299.929161] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [299.929964] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [299.930736] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [299.931545] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [299.932344] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [299.933147] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [299.933971] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [299.934758] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [299.935562] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [299.936364] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset <7> [299.937107] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:59:pipe A] releasing DPLL 0 <7> [299.937980] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [299.938889] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [299.939759] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [299.940593] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [299.941389] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [299.942195] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [299.942999] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [modeset] <7> [299.943778] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no <7> [299.944595] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no <7> [299.945394] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no <7> [299.947140] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [300.154189] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 0 <7> [300.158451] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [300.172918] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power off <7> [300.173365] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [300.174157] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power off time <7> [300.174637] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - short <7> [300.176977] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [300.227051] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [300.228532] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long <7> [300.228931] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [300.229776] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [300.231246] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:110:DDI A/PHY A] <7> [300.232033] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:59:pipe A] <7> [300.233169] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A] <7> [300.237430] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [300.239635] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [300.244539] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A] <7> [300.246737] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B] <7> [300.248614] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A] <7> [300.250607] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B] <7> [300.252713] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C] <7> [300.254772] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C] <7> [300.258880] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A] <7> [300.260967] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B] <7> [300.262998] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C] <7> [300.264973] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1] <7> [300.268698] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A] <7> [300.352151] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [300.407644] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:111:eDP-1] removing connector from sysfs <7> [300.441729] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:119:DP-1] removing connector from sysfs <7> [300.448756] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:128:HDMI-A-1] removing connector from sysfs <7> [300.466670] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:134:DP-2] removing connector from sysfs <7> [300.473162] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:140:HDMI-A-2] removing connector from sysfs <7> [300.499347] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (232 ms remaining) <7> [300.738304] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [300.780222] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [301.434239] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS <6> [301.435854] [IGT] i915_pm_rpm: exiting, ret=0

<6> [285.914357] Console: switching to colour dummy device 80x25

<7> [285.919787] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [285.920694] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1]

<7> [285.920707] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1]

<7> [285.921811] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [285.922128] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [285.922432] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [285.922757] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [285.922768] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor

<7> [285.922774] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0

<7> [285.922803] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no

<7> [285.923068] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [285.923374] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [285.925166] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes:

<7> [285.925178] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [285.925189] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [285.925315] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1]

<7> [285.925324] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [285.929771] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected

<7> [285.929862] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1]

<7> [285.929871] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [285.930760] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [285.931041] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [285.931571] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [285.931906] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [285.931915] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [285.932180] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [285.935965] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [285.935984] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [285.936332] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected

<7> [285.936460] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2]

<7> [285.936471] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [285.940822] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected

<7> [285.940908] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2]

<7> [285.940916] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [285.941490] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [285.941755] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [285.942220] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [285.942547] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [285.942554] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [285.942799] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [285.945851] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [285.945860] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [285.946179] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected

<7> [285.953335] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1]

<7> [285.953347] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [285.957737] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected

<7> [285.958531] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1]

<7> [285.958553] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [285.959250] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [285.959646] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [285.960216] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [285.960511] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [285.960518] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [285.960770] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [285.963982] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [285.963991] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [285.964379] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected

<7> [285.965036] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2]

<7> [285.965045] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [285.969427] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected

<7> [285.970045] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2]

<7> [285.970053] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [285.970616] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [285.970880] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [285.971309] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [285.971620] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [285.971628] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [285.971873] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [285.974962] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [285.974971] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [285.975295] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected

<7> [285.975759] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1]

<7> [285.975768] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1]

<7> [285.976087] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [285.976376] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [285.976687] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [285.976977] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [285.976986] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor

<7> [285.976993] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0

<7> [285.977022] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no

<7> [285.977312] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [285.977692] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [285.978492] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes:

<7> [285.978501] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [285.978508] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [285.978539] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1]

<7> [285.978546] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [285.982916] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected

<7> [285.982948] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1]

<7> [285.982956] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [285.983533] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [285.983792] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [285.984221] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [285.984543] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [285.984550] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [285.984795] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [285.987869] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [285.987877] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [285.988217] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected

<7> [285.988272] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2]

<7> [285.988283] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [285.992641] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected

<7> [285.992671] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2]

<7> [285.992679] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [285.993203] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [285.993517] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [285.993929] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [285.994257] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [285.994267] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [285.994545] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [285.998135] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [285.998167] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [285.998474] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected

<7> [285.999020] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:145]

<7> [286.147919] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [287.044109] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:59:pipe A]

<7> [287.044321] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [287.044681] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [287.044996] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [287.045332] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [287.045657] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [287.045957] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [287.046306] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [287.046621] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [287.046919] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [287.047241] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [287.047556] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [287.047851] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [287.048155] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [287.048498] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [287.048796] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [287.049092] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [287.049387] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [287.049677] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [287.049950] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [287.050242] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [287.050533] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [287.050808] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [287.051083] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [287.051375] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [287.051667] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [287.051942] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [287.052242] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [287.052602] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [287.052892] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [287.053184] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [287.053556] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [287.053902] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [287.054195] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [287.054573] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [287.054904] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [287.055197] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [287.055501] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [287.055838] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [287.056118] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [287.056426] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset

<7> [287.056760] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:59:pipe A] releasing DPLL 0

<7> [287.057084] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [287.057422] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [287.057732] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [287.057999] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [287.058321] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [287.058670] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [287.059093] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [287.059549] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [287.060043] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [287.060554] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz

<7> [287.061042] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [287.061491] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [287.061923] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [287.062392] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [modeset]

<7> [287.062846] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no

<7> [287.063293] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no

<7> [287.063734] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no

<7> [287.064430] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [287.066843] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [287.273322] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 0

<7> [287.274922] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [287.280700] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power off

<7> [287.281253] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [287.281973] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - short

<7> [287.282031] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [287.283580] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [287.332597] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [287.333537] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [287.334216] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [287.334762] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:59:pipe A]

<7> [287.334910] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long

<7> [287.335676] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [287.335812] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [287.336623] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [287.336937] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:110:DDI A/PHY A]

<7> [287.338077] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A]

<7> [287.338359] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A]

<7> [287.339168] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B]

<7> [287.339704] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A]

<7> [287.340162] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B]

<7> [287.340656] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C]

<7> [287.341209] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C]

<7> [287.341724] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A]

<7> [287.342296] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B]

<7> [287.342816] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C]

<7> [287.343307] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1]

<7> [287.344195] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A]

<7> [287.345596] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:84:pipe B]

<7> [287.346056] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:109:pipe C]

<7> [287.449902] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [287.454487] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [287.455976] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [287.457634] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [287.460915] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [287.484129] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [287.558479] i915 0000:00:02.0: [drm:compute_baseline_pipe_bpp [i915]] [CONNECTOR:111:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [287.559755] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:110:DDI A/PHY A][CRTC:59:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [287.560863] i915 0000:00:02.0: [drm:intel_dp_compute_output_format [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000

<7> [287.562293] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [287.564233] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:110:DDI A/PHY A] [CRTC:59:pipe A]

<7> [287.565475] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [287.566924] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [287.568087] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [287.569702] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [287.571416] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [287.573120] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [287.574882] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [287.576635] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [287.578295] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [287.579918] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [287.581082] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [287.582716] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [287.584414] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [287.586079] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [287.587583] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [287.589081] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [287.590226] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [287.591301] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [287.592293] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [287.593384] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [287.594412] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [287.595486] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [287.596519] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [287.597710] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [287.598872] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [287.600330] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [287.601559] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [287.602654] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [287.603679] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [287.604724] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [287.605760] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [287.606834] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [287.607822] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [287.608894] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [287.609906] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [287.611033] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [287.612327] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [287.613409] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [287.614444] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [287.615522] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset

<7> [287.616756] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [287.617737] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [287.618747] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [287.619786] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [287.620755] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [287.621768] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [287.622892] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [287.623928] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [287.625334] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [287.627012] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [287.628528] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [287.630011] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [287.631476] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [287.632729] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:59:pipe A] allocated DPLL 0

<7> [287.633783] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:59:pipe A] reserving DPLL 0

<7> [287.634870] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: yes [modeset]

<7> [287.635920] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [287.636976] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [287.638009] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [287.639096] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [287.640097] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [287.641124] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [287.642151] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [287.643392] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [287.644701] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [287.646220] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [287.647726] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [287.649153] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum hblank: 0

<7> [287.650142] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [287.651031] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [287.651721] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [287.652652] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [287.653659] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [287.654628] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [287.655620] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [287.656597] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [287.657385] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [287.658282] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [287.659007] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [287.659754] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [287.660498] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [287.661035] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [287.661546] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [287.662233] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [287.662985] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [287.663713] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pixel rate 373250, min cdclk 373250, min voltage level 0

<7> [287.664450] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [287.665151] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0

<7> [287.665838] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 3200x1800+0+0

<7> [287.666446] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [287.666917] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [287.667377] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [287.667824] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [287.668199] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [287.668615] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [287.669054] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [287.669471] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [287.669923] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [287.670324] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [287.670882] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [287.671485] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:112] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [287.672054] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [287.672645] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [287.673139] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no

<7> [287.673542] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no

<7> [287.685339] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [287.694406] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [287.695004] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [287.696163] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [287.696980] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [287.698235] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [287.699827] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A]

<7> [287.700119] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B]

<7> [287.700410] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A]

<7> [287.700774] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B]

<7> [287.701148] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C]

<7> [287.701541] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C]

<7> [287.701927] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A]

<7> [287.702279] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B]

<7> [287.702582] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C]

<7> [287.703003] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:59:pipe A]

<7> [287.703414] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [287.704049] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power on

<7> [287.704574] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (129 ms remaining)

<7> [287.841527] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [287.851398] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [287.851922] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power on

<7> [287.852479] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003

<7> [287.902049] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [287.903295] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long

<7> [287.904451] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [287.905725] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A]

<7> [288.056797] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [288.058587] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [288.060942] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [288.066059] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turning VDD on

<7> [288.067243] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b

<7> [288.072601] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [288.073449] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [288.077026] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [288.078425] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [288.079693] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [288.083065] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Clock recovery OK

<7> [288.084205] i915 0000:00:02.0: [drm:intel_dp_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [288.085463] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [288.089662] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [288.090910] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [288.092039] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [288.095568] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [288.096994] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [288.098220] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [288.102123] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [288.103264] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [288.105456] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [288.108671] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [288.109871] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [288.111699] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 37

<7> [288.141093] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [288.149682] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1]

<7> [288.151078] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A]

<7> [288.154894] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [288.157926] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<6> [288.159785] [IGT] i915_pm_rpm: starting subtest module-reload

<7> [288.163516] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [288.165141] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [288.166164] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [288.168423] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [288.169968] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [288.170005] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [288.172028] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [288.178573] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [288.178622] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [288.180559] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [288.186737] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [288.189171] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [288.190733] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [288.192983] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [288.195095] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [288.195134] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [288.197116] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [288.203234] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [288.203262] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [288.306041] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [288.306936] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [288.319463] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [288.346043] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [288.346539] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [288.359465] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [288.445227] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [288.446234] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [288.453018] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [288.453389] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [288.453680] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [288.453961] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [288.454241] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [288.454760] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [288.455079] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [288.455419] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [288.455800] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [288.457157] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [288.532991] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [288.533757] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [288.534070] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [288.534413] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [288.536220] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:112] is removed

<7> [288.536581] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [288.537007] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [288.537477] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [288.537918] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [288.538393] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [288.539651] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [288.540404] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [288.558033] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [288.558584] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [288.558927] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [288.559230] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [288.559560] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [288.559921] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [288.560446] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [288.560857] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [288.561277] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [288.561741] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [288.562152] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [288.562670] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [288.563134] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [288.563615] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [288.564090] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [288.564585] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [288.565030] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [288.565448] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [288.565888] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [288.566375] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [288.566837] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [288.567285] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [288.567761] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [288.568192] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [288.568636] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [288.568967] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [288.569291] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [288.569619] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [288.569940] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [288.570240] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [288.570575] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [288.570889] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [288.571185] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [288.571541] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [288.571872] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [288.572239] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [288.572588] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [288.572917] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [288.573216] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [288.573562] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [288.573884] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset

<7> [288.574185] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:59:pipe A] releasing DPLL 0

<7> [288.574573] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [288.574909] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [288.575239] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [288.575563] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [288.575883] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [288.576195] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [288.576600] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [modeset]

<7> [288.576918] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no

<7> [288.577216] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no

<7> [288.577654] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no

<7> [288.578697] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [288.785654] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 0

<7> [288.789905] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [288.813909] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power off

<7> [288.816082] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [288.817216] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - short

<7> [288.818599] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [288.824792] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [288.871023] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [288.872272] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long

<7> [288.873428] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [288.876463] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [288.879768] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:110:DDI A/PHY A]

<7> [288.881251] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:59:pipe A]

<7> [288.881378] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A]

<7> [288.886222] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [288.888307] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [288.893674] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A]

<7> [288.895672] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B]

<7> [288.897512] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A]

<7> [288.899249] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B]

<7> [288.901001] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C]

<7> [288.902699] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C]

<7> [288.904446] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A]

<7> [288.906179] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B]

<7> [288.907912] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C]

<7> [288.909649] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1]

<7> [288.912959] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A]

<7> [288.992159] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [289.033662] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:111:eDP-1] removing connector from sysfs

<7> [289.076168] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:119:DP-1] removing connector from sysfs

<7> [289.090231] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:128:HDMI-A-1] removing connector from sysfs

<7> [289.108480] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:134:DP-2] removing connector from sysfs

<7> [289.117778] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:140:HDMI-A-2] removing connector from sysfs

<7> [289.142295] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (236 ms remaining)

<7> [289.386063] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [289.460231] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<5> [291.085819] Setting dangerous option force_probe - tainting kernel

<6> [291.100775] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0

<7> [291.102786] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K

<7> [291.103335] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [291.103705] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH

<7> [291.104040] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [291.104377] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [291.104969] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [291.105253] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [291.106535] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [291.106829] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [291.107110] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [291.107374] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [291.107384] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [291.108113] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [291.108156] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [291.108474] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [291.108779] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7713 MiB [mem 0x00000000-0x1e2176fff], io: n/a

<7> [291.109030] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a

<7> [291.110197] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018

<7> [291.110614] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [291.110905] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [291.111193] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [291.111499] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [291.119609] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [291.119927] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [291.120214] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [291.120582] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [291.121045] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [291.121528] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [291.122014] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no

<7> [291.122481] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [291.122936] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [291.123392] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no

<7> [291.123852] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes

<7> [291.124313] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no

<7> [291.124781] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3

<7> [291.125240] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [291.125706] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0

<7> [291.126161] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0

<7> [291.127310] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [291.127679] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203

<7> [291.127988] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [291.128292] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [291.128654] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [291.129046] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [291.129399] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 850)

<7> [291.129803] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [291.130149] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [291.130547] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [291.130887] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [291.131208] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136)

<7> [291.131530] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [291.131879] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [291.132324] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [291.132679] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [291.133043] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [291.133346] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [291.133657] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [291.133972] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [291.134266] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [291.134581] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [291.134897] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [291.135263] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [291.135607] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [291.136092] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [291.136681] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [291.137187] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [291.138196] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [291.138633] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [291.139083] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [291.139546] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [291.140128] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [291.140486] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [291.140811] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [291.141215] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [291.141782] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [291.142242] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [291.142715] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [291.143127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [291.144235] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<7> [291.146360] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [291.146659] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [291.147280] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [291.147494] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [291.147796] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [291.148104] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [291.148286] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [291.148661] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided

<6> [291.149219] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [291.149066] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec)

<7> [291.149407] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec)

<7> [291.149749] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec)

<7> [291.150051] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec)

<7> [291.150339] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec)

<7> [291.150673] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec)

<7> [291.150988] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec)

<7> [291.151287] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec)

<7> [291.151608] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec)

<7> [291.151926] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec)

<7> [291.152222] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec)

<7> [291.152552] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec)

<7> [291.152904] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec)

<7> [291.153201] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec)

<7> [291.153560] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec)

<7> [291.159145] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available.

<7> [291.163456] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [291.163989] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:110:DDI A/PHY A] Using AUX CH A (VBT)

<7> [291.164631] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:110:DDI A/PHY A]

<7> [291.170554] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [291.171052] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [291.171711] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [291.172170] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [291.172763] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [291.173215] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [291.173749] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP

<7> [291.174200] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [291.174935] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0

<7> [291.175392] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0

<7> [291.176052] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:110:DDI A/PHY A] initial power sequencer: PPS 0

<7> [291.177123] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [291.177795] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [291.178228] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [291.178744] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [291.179178] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [291.179725] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [291.181311] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turning VDD on

<7> [291.181809] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [291.182178] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [291.192621] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [291.192975] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [291.193270] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [291.402696] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [291.406163] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [291.409946] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00

<7> [291.416719] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [291.441118] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [291.441179] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor

<7> [291.441218] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0

<7> [291.441962] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:111:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [291.444356] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:111:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [291.445749] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:111:eDP-1] DRRS type: static

<7> [291.448649] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:111:eDP-1] Using native PCH PWM for backlight control

<7> [291.449822] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:111:eDP-1] backlight initialized, disabled, brightness 0/937

<7> [291.451637] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [291.452593] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [291.453560] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [291.454367] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [291.455100] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [291.455922] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [291.457296] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:118:DDI B/PHY B] Using AUX CH B (VBT)

<7> [291.458042] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:118:DDI B/PHY B]

<7> [291.459979] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [291.460592] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:118:DDI B/PHY B]

<7> [291.461070] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:118:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [291.462254] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:133:DDI C/PHY C] Using AUX CH C (VBT)

<7> [291.462831] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:133:DDI C/PHY C]

<7> [291.464257] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [291.464904] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:133:DDI C/PHY C]

<7> [291.465380] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:133:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [291.466613] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled

<6> [291.467032] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem

<7> [291.467594] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:59:pipe A] hw state readout: disabled

<7> [291.468218] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:84:pipe B] hw state readout: disabled

<7> [291.468971] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:109:pipe C] hw state readout: disabled

<7> [291.469658] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:35:plane 1A] hw state readout: disabled, pipe A

<7> [291.470320] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:44:plane 2A] hw state readout: disabled, pipe A

<7> [291.470984] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:53:cursor A] hw state readout: disabled, pipe A

<7> [291.471516] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] hw state readout: disabled, pipe B

<7> [291.472078] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:69:plane 2B] hw state readout: disabled, pipe B

<7> [291.472781] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:78:cursor B] hw state readout: disabled, pipe B

<7> [291.473444] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:85:plane 1C] hw state readout: disabled, pipe C

<7> [291.474115] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 2C] hw state readout: disabled, pipe C

<7> [291.474561] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:103:cursor C] hw state readout: disabled, pipe C

<7> [291.474939] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [291.476208] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [291.476746] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST A] hw state readout: disabled, pipe A

<7> [291.477221] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST B] hw state readout: disabled, pipe B

<7> [291.477599] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:122:DP-MST C] hw state readout: disabled, pipe C

<7> [291.478005] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [291.478439] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST A] hw state readout: disabled, pipe A

<7> [291.478986] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST B] hw state readout: disabled, pipe B

<7> [291.479507] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:137:DP-MST C] hw state readout: disabled, pipe C

<7> [291.480071] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [291.480555] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [291.480943] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [291.481505] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [291.482191] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:111:eDP-1] hw state readout: disabled

<7> [291.483183] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:119:DP-1] hw state readout: disabled

<7> [291.483611] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:128:HDMI-A-1] hw state readout: disabled

<7> [291.484139] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:134:DP-2] hw state readout: disabled

<7> [291.484702] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:140:HDMI-A-2] hw state readout: disabled

<7> [291.485165] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:35:plane 1A] min_cdclk 0 kHz

<7> [291.485610] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:44:plane 2A] min_cdclk 0 kHz

<7> [291.485970] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:53:cursor A] min_cdclk 0 kHz

<7> [291.486293] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:59:pipe A] min_cdclk 0 kHz

<7> [291.486769] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] min_cdclk 0 kHz

<7> [291.487215] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:69:plane 2B] min_cdclk 0 kHz

<7> [291.487677] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:78:cursor B] min_cdclk 0 kHz

<7> [291.488129] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:84:pipe B] min_cdclk 0 kHz

<7> [291.488583] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:85:plane 1C] min_cdclk 0 kHz

<7> [291.488945] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 2C] min_cdclk 0 kHz

<7> [291.489254] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:103:cursor C] min_cdclk 0 kHz

<7> [291.489732] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:109:pipe C] min_cdclk 0 kHz

<7> [291.490185] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:59:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [291.490641] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:84:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [291.491095] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:109:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [291.492284] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [setup_hw_state]

<7> [291.492784] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:84:pipe B] enable: no [setup_hw_state]

<7> [291.493237] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:109:pipe C] enable: no [setup_hw_state]

<7> [291.493702] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [291.494192] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [291.494493] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [291.494917] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [291.495384] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global

<7> [291.497904] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [291.498244] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [291.498615] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0

<7> [291.527011] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [291.527338] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [291.527793] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [291.528193] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [291.528522] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 0: start 0x8

<7> [291.528881] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 1: start 0x108

<7> [291.529188] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 2: start 0x208

<7> [291.529511] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 3: start 0x308

<7> [291.529869] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 4: start 0x3c8

<7> [291.530204] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 0: start 0x8

<7> [291.530538] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 1: start 0x108

<7> [291.530863] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 2: start 0x208

<7> [291.531223] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 3: start 0x308

<7> [291.531688] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 4: start 0x3c8

<7> [291.532141] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 0: start 0x8

<7> [291.532634] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 1: start 0x108

<7> [291.533045] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 2: start 0x208

<7> [291.533354] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 3: start 0x308

<7> [291.533708] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 4: start 0x3c8

<7> [291.534511] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [fastset]

<7> [291.534973] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:84:pipe B] enable: no [fastset]

<7> [291.535428] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:109:pipe C] enable: no [fastset]

<7> [291.536074] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A]

<7> [291.536824] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:84:pipe B]

<7> [291.537307] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:109:pipe C]

<7> [291.537841] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [291.543975] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:111:eDP-1] adding connector to sysfs

<7> [291.545940] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:111:eDP-1] backlight device intel_backlight registered

<7> [291.546400] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:111:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [291.547301] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [291.549830] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:111:eDP-1] generating connector hotplug event

<7> [291.549944] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:119:DP-1] adding connector to sysfs

<7> [291.552858] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [291.560937] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:119:DP-1] generating connector hotplug event

<7> [291.561112] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:128:HDMI-A-1] adding connector to sysfs

<7> [291.563207] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:128:HDMI-A-1] generating connector hotplug event

<7> [291.563381] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:134:DP-2] adding connector to sysfs

<7> [291.565536] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [291.568852] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:134:DP-2] generating connector hotplug event

<7> [291.568998] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:140:HDMI-A-2] adding connector to sysfs

<7> [291.570496] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:140:HDMI-A-2] generating connector hotplug event

<6> [291.570635] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0

<7> [291.576256] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [291.610299] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [291.622323] input: Video Bus as /devices/pci0000:00/acpi.video_bus.0/input/input35

<7> [291.626866] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [291.632054] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [291.632785] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:119:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [291.633253] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [291.634366] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:59:pipe A] not active, skipping

<7> [291.634878] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:84:pipe B] not active, skipping

<7> [291.635336] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:109:pipe C] not active, skipping

<7> [291.635791] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config

<7> [291.637170] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:128:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [291.637680] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [291.638114] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:134:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [291.639638] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [291.640731] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [291.640927] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [291.641400] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:140:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [291.643329] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1]

<7> [291.643348] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1]

<7> [291.643851] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] status updated from unknown to disconnected

<7> [291.643866] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] disconnected

<7> [291.643878] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:111:eDP-1] EDID changed, epoch counter 2

<7> [291.643909] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1]

<7> [291.643920] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [291.644356] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected

<7> [291.644369] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1]

<7> [291.644380] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [291.644845] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected

<7> [291.644859] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2]

<7> [291.644871] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [291.645305] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected

<7> [291.645318] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2]

<7> [291.645329] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [291.646393] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [291.650565] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [291.650715] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected

<7> [291.650730] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [291.650740] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] enabled? no

<7> [291.650749] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:DP-1] enabled? no

<7> [291.650757] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-1] enabled? no

<7> [291.650766] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:134:DP-2] enabled? no

<7> [291.650774] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:140:HDMI-A-2] enabled? no

<7> [291.650836] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [291.650857] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [291.650977] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [291.650992] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [291.655432] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9

<7> [291.656710] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [291.657829] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1]

<7> [291.657855] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1]

<7> [291.658344] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] disconnected

<7> [291.658371] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1]

<7> [291.658384] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [291.659764] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected

<7> [291.659780] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1]

<7> [291.659791] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [291.660251] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected

<7> [291.660265] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2]

<7> [291.660277] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [291.660789] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected

<7> [291.660802] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2]

<7> [291.660813] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [291.661244] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected

<7> [291.661255] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [291.661275] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] enabled? no

<7> [291.661284] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:DP-1] enabled? no

<7> [291.661292] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-1] enabled? no

<7> [291.661300] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:134:DP-2] enabled? no

<7> [291.661308] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:140:HDMI-A-2] enabled? no

<7> [291.661598] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [291.661626] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0

<7> [291.662103] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no

<7> [291.662584] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no

<7> [291.663043] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no

<7> [291.663557] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [291.663689] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [291.663721] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [291.663852] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [291.663918] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [291.664051] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1]

<7> [291.664064] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1]

<7> [291.664505] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] disconnected

<7> [291.664520] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1]

<7> [291.664530] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [291.664949] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected

<7> [291.664963] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1]

<7> [291.664974] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [291.665401] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected

<7> [291.665415] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2]

<7> [291.665426] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [291.665867] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected

<7> [291.665880] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2]

<7> [291.665891] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [291.666330] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected

<7> [291.666341] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [291.666350] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] enabled? no

<7> [291.666358] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:DP-1] enabled? no

<7> [291.666366] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-1] enabled? no

<7> [291.666374] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:134:DP-2] enabled? no

<7> [291.666382] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:140:HDMI-A-2] enabled? no

<7> [291.666435] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [291.666455] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [291.667238] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [291.667265] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [291.667377] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [291.667405] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes

<7> [291.667908] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes

<7> [291.668365] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no

<7> [291.668839] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes

<7> [291.669299] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no

<7> [291.669779] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes

<7> [291.670229] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no

<7> [291.670707] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes

<7> [291.671155] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no

<7> [291.671627] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes

<7> [291.672084] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes

<7> [291.672615] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no

<7> [291.673076] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no

<7> [291.673537] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes

<7> [291.673987] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes

<7> [291.674441] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no

<7> [291.674905] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz

<7> [291.676529] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device

<7> [291.676985] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [291.677459] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [291.677942] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [291.678416] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [291.678898] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [291.679733] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9

<7> [291.680134] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9

<7> [291.680536] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9

<7> [291.680925] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0

<7> [291.681316] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0

<7> [291.681711] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2

<7> [291.682105] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21

<7> [291.682501] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000

<7> [291.682887] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE

<7> [291.683272] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48

<7> [291.683676] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2

<7> [291.684070] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39

<7> [291.684459] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no

<7> [291.684930] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no

<7> [291.685204] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no

<7> [291.685512] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes

<7> [291.685889] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no

<7> [291.686272] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no

<7> [291.686683] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes

<7> [291.687064] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes

<7> [291.687449] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no

<7> [291.687846] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no

<7> [291.688216] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no

<7> [291.688502] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes

<7> [291.688774] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no

<7> [291.689149] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no

<7> [291.689540] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no

<7> [291.689921] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no

<7> [291.690303] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no

<7> [291.690704] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no

<7> [291.691088] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes

<7> [291.691460] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes

<7> [291.691833] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no

<7> [291.692100] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no

<7> [291.692457] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no

<7> [291.692867] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no

<7> [291.693253] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no

<7> [291.693647] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no

<7> [291.694036] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no

<7> [291.694421] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no

<7> [291.694821] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes

<7> [291.695210] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no

<7> [291.695597] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes

<7> [291.695935] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes

<7> [291.696289] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no

<7> [291.696671] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes

<7> [291.697044] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no

<7> [291.697425] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no

<7> [291.697812] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no

<7> [291.698196] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no

<7> [291.698585] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled

<7> [291.698973] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403

<7> [291.699347] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001

<7> [291.699742] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3

<7> [291.700119] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007

<7> [291.700522] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000

<7> [291.700909] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000

<7> [291.701295] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24

<7> [291.701693] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8

<7> [291.702078] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no

<7> [291.702463] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no

<7> [291.702765] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes

<6> [291.703019] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [291.703022] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [291.703024] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [291.718277] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4

<6> [291.719986] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])

<7> [291.720705] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [291.722015] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [291.724966] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [291.765227] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [291.766237] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [291.767046] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [291.767455] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [291.767894] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [291.768938] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [291.769349] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [291.769767] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [291.770175] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<6> [291.803725] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36

<6> [291.812307] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input37

<6> [291.820952] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input38

<7> [292.901655] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [293.981390] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turning VDD off

<7> [293.981795] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [293.982092] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [293.982512] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [293.983199] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [293.984127] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [293.984243] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [293.984563] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long

<7> [293.984917] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [293.985364] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [293.985741] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A]

<7> [293.991735] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [294.033497] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [294.059770] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [294.072132] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [294.074477] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [294.075330] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [294.075347] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [294.076124] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [294.076489] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [294.076870] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [294.077519] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [294.078393] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [294.079659] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [294.092756] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [294.093362] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [294.093953] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [294.094781] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [294.096001] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [294.228557] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [294.229023] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [294.230110] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [294.231406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [294.232567] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [294.240015] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [294.240330] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [294.240764] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [294.241150] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [294.241414] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [294.241734] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [294.242033] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [294.242293] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [294.242565] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [294.243571] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [294.245260] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [294.245724] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [294.246139] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [294.246974] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [294.322550] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [294.322967] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [294.324279] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [294.325124] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [294.325934] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [294.326474] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [294.327069] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [294.327633] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [294.328201] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [294.363062] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [294.382509] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:111:eDP-1] removing connector from sysfs

<7> [294.395351] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:119:DP-1] removing connector from sysfs

<7> [294.402142] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:128:HDMI-A-1] removing connector from sysfs

<7> [294.414820] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:134:DP-2] removing connector from sysfs

<7> [294.423547] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:140:HDMI-A-2] removing connector from sysfs

<7> [294.456093] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (27 ms remaining)

<7> [294.485844] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [294.495776] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<5> [295.940689] Setting dangerous option force_probe - tainting kernel

<6> [295.955210] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0

<7> [295.957295] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K

<7> [295.957806] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [295.958165] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH

<7> [295.958468] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [295.958871] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [295.959387] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [295.959698] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [295.961105] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [295.961402] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [295.961695] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [295.962024] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [295.962035] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [295.962819] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [295.962874] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [295.963210] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [295.963570] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7713 MiB [mem 0x00000000-0x1e2176fff], io: n/a

<7> [295.963970] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a

<7> [295.965550] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018

<7> [295.965969] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [295.966269] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [295.966695] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [295.967130] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [295.975724] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [295.976053] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [295.976349] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [295.976645] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [295.976991] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [295.977466] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [295.977962] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no

<7> [295.978438] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [295.978928] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [295.979402] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no

<7> [295.979895] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes

<7> [295.980367] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no

<7> [295.980854] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3

<7> [295.981324] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [295.981818] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0

<7> [295.982293] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0

<7> [295.983497] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [295.983886] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203

<7> [295.984205] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [295.984523] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [295.984867] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [295.985236] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [295.985562] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 850)

<7> [295.986017] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [295.986373] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [295.986727] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [295.987088] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [295.987404] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136)

<7> [295.987728] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [295.988086] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [295.988389] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [295.988832] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [295.989204] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [295.989528] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [295.989993] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [295.990443] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [295.990916] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [295.991368] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [295.991766] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [295.992117] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [295.992518] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [295.993015] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [295.993576] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [295.994105] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [295.994482] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [295.994815] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [295.995248] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [295.995697] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [295.996259] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [295.996656] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [295.997572] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [295.998078] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [295.998631] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [295.999105] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [295.999529] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [295.999870] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [296.001068] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<7> [296.003257] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [296.003521] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [296.004151] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [296.004372] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [296.004629] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [296.005120] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<6> [296.006001] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [296.006818] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [296.007176] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided

<7> [296.007479] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec)

<7> [296.007830] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec)

<7> [296.008180] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec)

<7> [296.008569] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec)

<7> [296.009024] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec)

<7> [296.009462] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec)

<7> [296.009913] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec)

<7> [296.010337] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec)

<7> [296.010638] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec)

<7> [296.010950] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec)

<7> [296.011371] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec)

<7> [296.011822] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec)

<7> [296.012267] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec)

<7> [296.012726] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec)

<7> [296.013172] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec)

<7> [296.018933] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available.

<7> [296.024405] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [296.024965] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:110:DDI A/PHY A] Using AUX CH A (VBT)

<7> [296.025462] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:110:DDI A/PHY A]

<7> [296.032633] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [296.033147] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [296.033597] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [296.034285] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [296.034802] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [296.035275] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [296.035936] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP

<7> [296.036395] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [296.037048] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0

<7> [296.037520] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0

<7> [296.038197] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:110:DDI A/PHY A] initial power sequencer: PPS 0

<7> [296.039412] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [296.039905] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [296.040350] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [296.040802] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [296.041244] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [296.041750] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [296.042504] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turning VDD on

<7> [296.043012] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [296.043503] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [296.053839] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [296.054201] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [296.054495] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [296.258833] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [296.261816] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [296.263860] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00

<7> [296.270044] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [296.288048] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [296.288101] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor

<7> [296.288133] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0

<7> [296.288558] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:111:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [296.290019] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:111:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [296.292251] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:111:eDP-1] DRRS type: static

<7> [296.296676] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:111:eDP-1] Using native PCH PWM for backlight control

<7> [296.298963] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:111:eDP-1] backlight initialized, disabled, brightness 0/937

<7> [296.301992] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [296.303987] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [296.305961] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [296.308081] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [296.310178] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [296.312356] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [296.316385] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:118:DDI B/PHY B] Using AUX CH B (VBT)

<7> [296.318831] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:118:DDI B/PHY B]

<7> [296.325523] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [296.327928] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:118:DDI B/PHY B]

<7> [296.330081] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:118:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [296.334968] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:133:DDI C/PHY C] Using AUX CH C (VBT)

<7> [296.337204] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:133:DDI C/PHY C]

<7> [296.344383] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [296.346867] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:133:DDI C/PHY C]

<7> [296.348994] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:133:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [296.354125] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled

<6> [296.356467] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem

<7> [296.357871] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:59:pipe A] hw state readout: disabled

<7> [296.361191] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:84:pipe B] hw state readout: disabled

<7> [296.364509] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:109:pipe C] hw state readout: disabled

<7> [296.366974] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:35:plane 1A] hw state readout: disabled, pipe A

<7> [296.369376] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:44:plane 2A] hw state readout: disabled, pipe A

<7> [296.370978] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:53:cursor A] hw state readout: disabled, pipe A

<7> [296.372343] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] hw state readout: disabled, pipe B

<7> [296.373679] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:69:plane 2B] hw state readout: disabled, pipe B

<7> [296.375029] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:78:cursor B] hw state readout: disabled, pipe B

<7> [296.376360] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:85:plane 1C] hw state readout: disabled, pipe C

<7> [296.377717] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 2C] hw state readout: disabled, pipe C

<7> [296.379072] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:103:cursor C] hw state readout: disabled, pipe C

<7> [296.380049] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [296.381021] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [296.381925] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST A] hw state readout: disabled, pipe A

<7> [296.382815] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST B] hw state readout: disabled, pipe B

<7> [296.383712] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:122:DP-MST C] hw state readout: disabled, pipe C

<7> [296.384666] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [296.385584] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST A] hw state readout: disabled, pipe A

<7> [296.386488] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST B] hw state readout: disabled, pipe B

<7> [296.387377] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:137:DP-MST C] hw state readout: disabled, pipe C

<7> [296.388322] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [296.389109] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [296.389886] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [296.390647] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [296.391596] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:111:eDP-1] hw state readout: disabled

<7> [296.392444] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:119:DP-1] hw state readout: disabled

<7> [296.393300] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:128:HDMI-A-1] hw state readout: disabled

<7> [296.394138] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:134:DP-2] hw state readout: disabled

<7> [296.394980] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:140:HDMI-A-2] hw state readout: disabled

<7> [296.395675] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:35:plane 1A] min_cdclk 0 kHz

<7> [296.396411] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:44:plane 2A] min_cdclk 0 kHz

<7> [296.396993] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:53:cursor A] min_cdclk 0 kHz

<7> [296.397408] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:59:pipe A] min_cdclk 0 kHz

<7> [296.397844] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] min_cdclk 0 kHz

<7> [296.398281] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:69:plane 2B] min_cdclk 0 kHz

<7> [296.398655] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:78:cursor B] min_cdclk 0 kHz

<7> [296.399058] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:84:pipe B] min_cdclk 0 kHz

<7> [296.399494] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:85:plane 1C] min_cdclk 0 kHz

<7> [296.399892] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 2C] min_cdclk 0 kHz

<7> [296.400327] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:103:cursor C] min_cdclk 0 kHz

<7> [296.400725] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:109:pipe C] min_cdclk 0 kHz

<7> [296.401177] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:59:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [296.401546] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:84:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [296.401986] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:109:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [296.402916] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [setup_hw_state]

<7> [296.403474] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:84:pipe B] enable: no [setup_hw_state]

<7> [296.404117] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:109:pipe C] enable: no [setup_hw_state]

<7> [296.404615] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [296.405158] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [296.405516] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [296.405901] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [296.406338] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global

<7> [296.409296] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [296.409657] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [296.410035] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0

<7> [296.437644] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [296.438071] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [296.438315] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [296.438555] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [296.438816] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 0: start 0x8

<7> [296.439174] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 1: start 0x108

<7> [296.439463] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 2: start 0x208

<7> [296.439776] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 3: start 0x308

<7> [296.440127] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 4: start 0x3c8

<7> [296.440423] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 0: start 0x8

<7> [296.440738] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 1: start 0x108

<7> [296.441136] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 2: start 0x208

<7> [296.441585] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 3: start 0x308

<7> [296.441998] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 4: start 0x3c8

<7> [296.442308] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 0: start 0x8

<7> [296.442616] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 1: start 0x108

<7> [296.443039] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 2: start 0x208

<7> [296.443359] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 3: start 0x308

<7> [296.443667] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 4: start 0x3c8

<7> [296.444368] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [fastset]

<7> [296.444705] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:84:pipe B] enable: no [fastset]

<7> [296.445020] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:109:pipe C] enable: no [fastset]

<7> [296.445539] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A]

<7> [296.446271] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:84:pipe B]

<7> [296.446816] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:109:pipe C]

<7> [296.447308] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [296.455172] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:111:eDP-1] adding connector to sysfs

<7> [296.457251] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:111:eDP-1] backlight device intel_backlight registered

<7> [296.457799] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:111:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [296.459068] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [296.462178] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:111:eDP-1] generating connector hotplug event

<7> [296.462350] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:119:DP-1] adding connector to sysfs

<7> [296.464021] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [296.466119] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:119:DP-1] generating connector hotplug event

<7> [296.466276] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:128:HDMI-A-1] adding connector to sysfs

<7> [296.467371] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:128:HDMI-A-1] generating connector hotplug event

<7> [296.467537] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:134:DP-2] adding connector to sysfs

<7> [296.469201] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [296.472081] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:134:DP-2] generating connector hotplug event

<7> [296.472211] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:140:HDMI-A-2] adding connector to sysfs

<7> [296.473298] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:140:HDMI-A-2] generating connector hotplug event

<6> [296.473427] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0

<7> [296.481660] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [296.520679] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [296.532388] input: Video Bus as /devices/pci0000:00/acpi.video_bus.0/input/input39

<7> [296.535304] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [296.540428] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [296.542604] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:59:pipe A] not active, skipping

<7> [296.543136] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:84:pipe B] not active, skipping

<7> [296.543568] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:109:pipe C] not active, skipping

<7> [296.544619] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config

<7> [296.545447] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [296.546030] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:119:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [296.546526] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [296.547676] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [296.548193] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [296.548801] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [296.549297] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [296.549309] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [296.549765] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [296.552804] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [296.555182] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [296.555197] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [296.555799] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:128:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [296.556279] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [296.560858] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:134:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [296.561276] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [296.561860] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [296.562295] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [296.562955] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [296.563429] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [296.563441] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [296.563894] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [296.567339] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [296.567352] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [296.567851] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:140:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [296.569391] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [296.571616] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1]

<7> [296.571636] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1]

<7> [296.572442] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [296.572927] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [296.573374] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [296.575027] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [296.575042] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor

<7> [296.575053] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0

<7> [296.575103] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no

<7> [296.575593] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [296.576151] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [296.578353] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] status updated from unknown to connected

<7> [296.578592] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes:

<7> [296.578603] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [296.578615] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [296.578629] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1]

<7> [296.578641] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [296.579171] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [296.583529] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected

<7> [296.583548] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1]

<7> [296.583560] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [296.585422] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [296.586062] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [296.586692] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [296.587487] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [296.587500] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [296.588161] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [296.593044] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [296.593061] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [296.593584] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected

<7> [296.593600] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2]

<7> [296.593612] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [296.598668] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected

<7> [296.598687] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2]

<7> [296.598741] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [296.599506] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [296.599983] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [296.600620] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [296.601114] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [296.601126] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [296.601576] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [296.605088] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [296.605103] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [296.605589] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected

<7> [296.605604] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] enabled? yes

<7> [296.605614] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:DP-1] enabled? no

<7> [296.605622] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-1] enabled? no

<7> [296.605630] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:134:DP-2] enabled? no

<7> [296.605638] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:140:HDMI-A-2] enabled? no

<7> [296.605725] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [296.605763] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] found preferred mode: 3200x1800

<7> [296.605772] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [296.605806] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:59:pipe A] desired mode 3200x1800 set (0,0)

<7> [296.605945] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [296.606002] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] no BIOS fb, allocating a new one

<7> [296.613270] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 3200x1800 fb

<6> [296.616092] fbcon: i915drmfb (fb0) is primary device

<6> [296.617996] Console: switching to colour frame buffer device 200x56

<6> [296.618016] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device

<7> [296.618043] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9

<7> [296.618546] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0

<7> [296.619058] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no

<7> [296.619556] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no

<7> [296.620398] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [296.620417] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [296.620263] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no

<7> [296.620733] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes

<7> [296.621162] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1]

<7> [296.621187] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1]

<7> [296.621198] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes

<7> [296.621653] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no

<7> [296.622124] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes

<7> [296.622592] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no

<7> [296.623138] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes

<7> [296.623601] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no

<7> [296.624073] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes

<7> [296.624319] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [296.624535] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no

<7> [296.624802] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [296.625007] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes

<7> [296.625242] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [296.625463] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes

<7> [296.626033] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no

<7> [296.626506] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no

<7> [296.626973] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes

<7> [296.627432] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes

<7> [296.627897] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no

<7> [296.628345] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz

<7> [296.629964] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device

<7> [296.630434] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [296.630680] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [296.630750] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor

<7> [296.630770] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0

<7> [296.630843] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no

<7> [296.630936] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [296.631296] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [296.631414] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [296.631757] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [296.631904] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [296.632304] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [296.633061] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9

<7> [296.633458] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9

<7> [296.634029] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9

<7> [296.634433] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0

<7> [296.634926] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0

<7> [296.635321] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2

<7> [296.635723] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21

<7> [296.636092] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000

<7> [296.636463] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE

<7> [296.636861] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48

<7> [296.637243] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2

<7> [296.637624] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39

<7> [296.638017] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no

<7> [296.638400] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no

<7> [296.639284] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no

<7> [296.639727] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes:

<7> [296.639751] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [296.639765] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [296.639779] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1]

<7> [296.639681] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes

<7> [296.639791] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [296.640092] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no

<7> [296.640474] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no

<7> [296.640869] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes

<7> [296.641261] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes

<7> [296.641636] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no

<7> [296.642041] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no

<7> [296.642429] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no

<7> [296.642833] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes

<7> [296.643217] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no

<7> [296.643602] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no

<7> [296.643998] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no

<7> [296.644369] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected

<7> [296.644390] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1]

<7> [296.644382] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no

<7> [296.644403] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [296.644785] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no

<7> [296.645165] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no

<7> [296.645550] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes

<7> [296.645952] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes

<7> [296.646353] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no

<7> [296.647081] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [296.647563] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [296.648291] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [296.649470] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [296.649484] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [296.649777] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no

<7> [296.649970] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [296.650182] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no

<7> [296.650562] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no

<7> [296.650969] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no

<7> [296.651354] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no

<7> [296.651778] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no

<7> [296.652164] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no

<7> [296.652550] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes

<7> [296.652953] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no

<7> [296.653341] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes

<7> [296.654545] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes

<7> [296.655018] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no

<7> [296.655402] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes

<7> [296.655785] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no

<7> [296.656159] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [296.656175] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [296.656229] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no

<7> [296.656685] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected

<7> [296.656730] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2]

<7> [296.656614] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no

<7> [296.656744] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [296.657002] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no

<7> [296.657377] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled

<7> [296.657770] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403

<7> [296.658156] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001

<7> [296.659622] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3

<7> [296.660053] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007

<7> [296.660446] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000

<7> [296.661052] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000

<7> [296.661443] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24

<7> [296.661633] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected

<7> [296.661653] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2]

<7> [296.661665] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [296.662470] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [296.662929] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [296.663563] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [296.663658] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8

<7> [296.664055] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no

<7> [296.664441] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no

<7> [296.664828] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [296.664866] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes

<7> [296.664842] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<6> [296.665255] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [296.665259] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [296.665263] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [296.665286] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [296.670332] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [296.670348] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [296.671350] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected

<7> [296.671368] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] enabled? yes

<7> [296.671378] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:DP-1] enabled? no

<7> [296.671387] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-1] enabled? no

<7> [296.671396] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:134:DP-2] enabled? no

<7> [296.671404] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:140:HDMI-A-2] enabled? no

<7> [296.672385] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [296.672467] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] found preferred mode: 3200x1800

<7> [296.672478] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [296.672559] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:59:pipe A] desired mode 3200x1800 set (0,0)

<7> [296.678377] i915 0000:00:02.0: [drm:compute_baseline_pipe_bpp [i915]] [CONNECTOR:111:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [296.678886] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:110:DDI A/PHY A][CRTC:59:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [296.679899] i915 0000:00:02.0: [drm:intel_dp_compute_output_format [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000

<7> [296.680347] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [296.680845] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:110:DDI A/PHY A] [CRTC:59:pipe A]

<7> [296.681251] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [296.681797] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [296.682222] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [296.682646] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [296.683666] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [296.684485] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [296.684952] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [296.685382] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [296.685938] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [296.686371] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [296.686817] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [296.687255] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [296.687681] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [296.690283] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [296.690833] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [296.691238] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [296.691669] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [296.692110] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [296.692534] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [296.692977] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [296.693392] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [296.693852] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [296.694276] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [296.694717] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [296.695135] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [296.695553] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [296.696527] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [296.697281] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [296.697798] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [296.698219] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [296.698640] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [296.699206] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [296.699639] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [296.700121] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [296.700566] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<6> [296.702287] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4

<7> [296.703168] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dpll_hw_state

<7> [296.703627] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [296.704156] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0

<7> [296.704578] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [296.705031] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [296.705456] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [296.705915] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [296.706334] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [296.706899] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [296.707335] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset

<7> [296.707879] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [296.708308] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [296.709420] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [296.710182] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [296.710672] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [296.711219] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [296.711628] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [296.712090] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [296.712587] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [296.715258] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [296.715727] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [296.716138] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [296.716564] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [296.717145] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:59:pipe A] allocated DPLL 0

<7> [296.717561] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:59:pipe A] reserving DPLL 0

<7> [296.718020] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: yes [modeset]

<7> [296.718431] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [296.718884] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [296.719305] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [296.719763] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [296.720176] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [296.720597] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [296.721093] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [296.721507] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [296.721946] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [296.722361] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [296.722789] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [296.725756] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum hblank: 0

<7> [296.726204] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [296.726631] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [296.727176] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [296.727596] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [296.728043] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [296.728455] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [296.728893] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [296.729300] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [296.729738] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [296.730147] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [296.730564] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [296.731003] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [296.731415] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [296.731854] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [296.732264] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [296.732676] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [296.733112] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [296.733441] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pixel rate 373250, min cdclk 373250, min voltage level 0

<7> [296.734578] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [296.735042] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0

<7> [296.735456] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 3200x1800+0+0

<7> [296.737065] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [296.737515] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [296.737954] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [296.738362] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [296.738802] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [296.739329] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [296.739768] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [296.740181] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [296.740595] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [296.741043] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [296.741464] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [296.741905] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:112] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [296.742321] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [296.742865] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [296.743296] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no

<7> [296.743753] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no

<7> [296.744958] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [296.746698] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A]

<7> [296.747178] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B]

<7> [296.747603] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A]

<7> [296.748115] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B]

<7> [296.748540] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C]

<7> [296.748984] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C]

<7> [296.749391] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A]

<7> [296.750716] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B]

<7> [296.751151] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C]

<7> [296.754739] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:59:pipe A]

<7> [296.755204] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [296.756435] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power on

<7> [296.757388] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [296.758666] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [296.770002] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [296.770456] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power on

<7> [296.770925] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000000b

<7> [296.980385] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [296.982588] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [296.985568] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [296.995623] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [296.996944] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [297.004373] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [297.006446] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [297.008401] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [297.014951] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Clock recovery OK

<7> [297.016914] i915 0000:00:02.0: [drm:intel_dp_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [297.018816] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [297.024048] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [297.026025] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [297.027982] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [297.033105] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [297.035006] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [297.038471] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [297.042876] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [297.044561] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [297.049076] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 37

<7> [297.063164] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 487 us, max time under evasion is 250 us

<7> [297.075398] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [297.084551] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1]

<7> [297.086327] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A]

<7> [297.092524] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp

<6> [297.105166] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])

<7> [297.106431] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [297.109039] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [297.109069] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [297.109384] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1]

<7> [297.109207] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [297.109421] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1]

<7> [297.117205] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [297.126167] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [297.127012] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [297.129777] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [297.130432] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [297.131202] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [297.131225] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor

<7> [297.131242] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0

<7> [297.131304] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no

<7> [297.132052] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [297.132459] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [297.134636] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes:

<7> [297.134654] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [297.134671] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [297.134687] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1]

<7> [297.134702] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [297.139440] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected

<7> [297.139459] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1]

<7> [297.139470] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [297.140534] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [297.140929] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [297.141404] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [297.142234] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [297.142248] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [297.142670] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [297.145982] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [297.145995] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [297.146338] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected

<7> [297.146351] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2]

<7> [297.146360] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [297.150748] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected

<7> [297.150766] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2]

<7> [297.150778] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [297.151401] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [297.151802] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [297.152356] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [297.152781] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [297.152794] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [297.153150] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [297.157112] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [297.157128] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [297.158114] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected

<7> [297.158129] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] enabled? yes

<7> [297.158139] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:DP-1] enabled? no

<7> [297.158146] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-1] enabled? no

<7> [297.158154] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:134:DP-2] enabled? no

<7> [297.158162] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:140:HDMI-A-2] enabled? no

<7> [297.158230] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [297.158259] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] found preferred mode: 3200x1800

<7> [297.158267] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [297.158710] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:59:pipe A] desired mode 3200x1800 set (0,0)

<7> [297.159556] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [297.160217] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1]

<7> [297.160228] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1]

<7> [297.160740] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [297.161048] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [297.161303] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [297.161614] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [297.161623] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor

<7> [297.161630] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0

<7> [297.161663] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no

<7> [297.162497] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [297.162845] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [297.165481] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes:

<7> [297.165493] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [297.165501] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [297.165621] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1]

<7> [297.165629] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [297.170147] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected

<7> [297.170269] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1]

<7> [297.170280] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [297.171275] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [297.171703] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [297.172319] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [297.173252] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [297.173263] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [297.173666] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [297.177049] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [297.177063] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [297.177526] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected

<7> [297.177662] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2]

<7> [297.177673] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [297.180714] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [297.181509] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [297.182205] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected

<7> [297.182329] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2]

<7> [297.182341] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [297.183042] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [297.183440] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [297.184014] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [297.184409] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [297.184419] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [297.184803] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [297.184803] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [297.185238] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [297.185625] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [297.186044] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [297.186443] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [297.187343] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [297.188057] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [297.187917] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [297.188071] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [297.188510] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected

<7> [297.195324] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1]

<7> [297.195341] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [297.199935] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected

<7> [297.200977] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1]

<7> [297.200993] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [297.201708] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [297.202177] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [297.202989] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [297.203492] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [297.203503] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [297.204151] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [297.207453] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [297.207468] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [297.207961] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected

<7> [297.208873] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2]

<7> [297.208883] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [297.213518] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected

<7> [297.214554] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2]

<7> [297.214571] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [297.215329] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [297.217734] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [297.218346] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [297.218833] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [297.218845] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [297.219258] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [297.222553] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [297.222566] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [297.223117] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected

<7> [297.223783] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1]

<7> [297.223796] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1]

<7> [297.224300] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [297.224717] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [297.225126] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [297.225581] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [297.225594] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor

<7> [297.225604] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0

<7> [297.225666] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no

<7> [297.226086] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [297.226487] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [297.228081] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes:

<7> [297.228095] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [297.228107] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [297.228155] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1]

<7> [297.228166] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [297.232773] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected

<7> [297.232828] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1]

<7> [297.232842] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [297.233561] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [297.234035] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [297.234621] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [297.235103] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [297.235114] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [297.235531] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [297.239112] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [297.239125] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [297.239611] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected

<7> [297.239663] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2]

<7> [297.239673] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<6> [297.240259] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input40

<7> [297.244300] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected

<7> [297.244356] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2]

<7> [297.244368] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [297.245112] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [297.245538] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [297.246154] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [297.249362] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [297.249376] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [297.249905] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<6> [297.251706] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input41

<7> [297.256808] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [297.256825] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [297.258352] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected

<6> [297.259174] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input42

<7> [297.263122] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:144]

<7> [298.313335] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:59:pipe A]

<7> [298.313988] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [298.315611] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [298.315938] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [298.316381] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [298.316831] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [298.317264] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [298.317691] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [298.318153] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [298.318580] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [298.319023] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [298.319459] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [298.319907] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [298.320341] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [298.320779] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [298.321214] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [298.321663] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [298.322130] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [298.322573] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [298.323025] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [298.323466] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [298.323916] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [298.324366] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [298.324828] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [298.325269] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [298.325702] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [298.326151] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [298.326530] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [298.326985] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [298.327434] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [298.327899] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [298.328343] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [298.328803] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [298.329253] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [298.329693] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [298.330160] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [298.330610] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [298.331066] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [298.331510] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [298.331959] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [298.332400] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset

<7> [298.332880] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:59:pipe A] releasing DPLL 0

<7> [298.333368] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [298.333866] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [298.334291] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [298.334725] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [298.335177] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [298.335608] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [298.336038] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [298.336447] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [298.336950] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [298.337454] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz

<7> [298.337946] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [298.338361] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [298.338825] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [298.339141] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [modeset]

<7> [298.339410] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no

<7> [298.339674] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no

<7> [298.340094] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no

<7> [298.340534] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [298.343090] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [298.419287] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [298.546236] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 0

<7> [298.550696] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [298.559648] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power off

<7> [298.560027] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [298.560339] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [298.560652] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - short

<7> [298.561532] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [298.611938] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [298.612255] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [298.613564] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long

<7> [298.614673] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [298.615082] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [298.623981] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:110:DDI A/PHY A]

<7> [298.624399] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:59:pipe A]

<7> [298.625276] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A]

<7> [298.626681] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [298.628520] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [298.633379] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A]

<7> [298.635289] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B]

<7> [298.636943] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A]

<7> [298.638452] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B]

<7> [298.639976] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C]

<7> [298.641553] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C]

<7> [298.643274] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A]

<7> [298.644964] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B]

<7> [298.646449] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C]

<7> [298.647918] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1]

<7> [298.650849] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A]

<7> [298.654875] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:84:pipe B]

<7> [298.656507] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:109:pipe C]

<7> [298.754476] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [298.756405] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [298.757586] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [298.761623] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [298.764489] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [298.786496] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [298.876381] i915 0000:00:02.0: [drm:compute_baseline_pipe_bpp [i915]] [CONNECTOR:111:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [298.877603] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:110:DDI A/PHY A][CRTC:59:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [298.878668] i915 0000:00:02.0: [drm:intel_dp_compute_output_format [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000

<7> [298.880938] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [298.882322] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:110:DDI A/PHY A] [CRTC:59:pipe A]

<7> [298.883628] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [298.885048] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [298.886598] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [298.888082] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [298.889148] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [298.890399] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [298.891412] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [298.892733] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [298.893833] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [298.895014] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [298.896054] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [298.897460] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [298.898713] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [298.900399] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [298.902027] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [298.903634] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [298.905115] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [298.906659] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [298.907836] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [298.909396] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [298.910967] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [298.912474] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [298.913975] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [298.915409] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [298.916855] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [298.918300] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [298.919846] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [298.921347] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [298.922866] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [298.924137] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [298.925140] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [298.926370] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [298.927875] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [298.929352] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [298.930866] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [298.932340] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [298.933825] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [298.935023] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [298.936419] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [298.937934] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset

<7> [298.939660] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [298.941100] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [298.942519] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [298.943967] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [298.945179] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [298.946363] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [298.947355] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [298.948480] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [298.949640] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [298.950926] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [298.952127] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [298.953318] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [298.954597] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [298.955673] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:59:pipe A] allocated DPLL 0

<7> [298.956899] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:59:pipe A] reserving DPLL 0

<7> [298.957916] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: yes [modeset]

<7> [298.959164] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [298.960197] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [298.961349] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [298.962539] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [298.963660] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [298.964659] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [298.965847] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [298.966782] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [298.967830] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [298.969036] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [298.970094] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [298.971295] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum hblank: 0

<7> [298.972692] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [298.973898] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [298.974905] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [298.975948] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [298.976967] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [298.978018] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [298.979014] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [298.980048] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [298.981079] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [298.982205] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [298.983510] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [298.984673] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [298.985685] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [298.986952] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [298.987966] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [298.989167] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [298.990199] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [298.991352] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pixel rate 373250, min cdclk 373250, min voltage level 0

<7> [298.992335] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [298.993178] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0

<7> [298.993958] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 3200x1800+0+0

<7> [298.994952] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [298.995940] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [298.996927] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [298.997903] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [298.998555] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [298.999226] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [299.000179] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [299.001128] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [299.001861] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [299.002569] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [299.003226] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [299.003938] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:112] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [299.004632] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [299.005388] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [299.006132] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no

<7> [299.006890] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no

<7> [299.018944] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [299.028484] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [299.029275] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [299.031786] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [299.033353] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [299.034185] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [299.035755] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A]

<7> [299.036300] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B]

<7> [299.036765] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A]

<7> [299.037214] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B]

<7> [299.037547] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C]

<7> [299.037893] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C]

<7> [299.038345] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A]

<7> [299.038842] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B]

<7> [299.039303] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C]

<7> [299.040094] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:59:pipe A]

<7> [299.040467] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [299.041040] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power on

<7> [299.041669] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (73 ms remaining)

<7> [299.122077] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [299.172101] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [299.174891] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power on

<7> [299.176599] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003

<7> [299.225030] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [299.226129] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long

<7> [299.227141] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [299.228252] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A]

<7> [299.381940] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [299.383149] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [299.384467] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [299.390765] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turning VDD on

<7> [299.391938] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b

<7> [299.398446] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [299.399718] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [299.405321] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [299.406901] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [299.408447] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [299.412096] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Clock recovery OK

<7> [299.413515] i915 0000:00:02.0: [drm:intel_dp_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [299.415076] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [299.421758] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [299.423263] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [299.424757] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [299.429358] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [299.430840] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [299.433484] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [299.437073] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [299.438593] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [299.440596] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 37

<7> [299.454157] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 378 us, max time under evasion is 250 us

<7> [299.469640] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [299.478173] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1]

<7> [299.479598] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A]

<7> [299.483870] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [299.487015] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [299.492236] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [299.494000] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [299.495684] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [299.497692] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [299.500712] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [299.500753] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [299.502771] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [299.508877] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [299.508912] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [299.516270] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [299.521991] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [299.523463] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [299.524467] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [299.526608] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [299.528666] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [299.528703] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [299.530632] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [299.536597] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [299.536640] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [299.635596] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [299.636497] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [299.650014] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [299.676580] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [299.677074] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [299.689980] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [299.760334] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [299.761718] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [299.770861] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [299.771336] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [299.771725] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [299.772224] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [299.772651] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [299.773698] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [299.774661] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [299.775316] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [299.775880] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [299.777077] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [299.865952] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [299.867582] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [299.868165] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [299.868599] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<6> [299.872141] Console: switching to colour dummy device 80x25

<7> [299.872382] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:112] is removed

<7> [299.872517] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [299.877507] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [299.878213] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [299.879027] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [299.879840] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [299.880600] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [299.883167] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [299.903203] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [299.903956] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [299.904750] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [299.906973] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [299.907673] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [299.908461] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [299.909261] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [299.910076] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [299.910855] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [299.911610] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [299.912420] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [299.913221] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [299.913962] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [299.914749] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [299.915588] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [299.916380] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [299.917206] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [299.918026] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [299.918805] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [299.919608] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [299.920406] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [299.921207] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [299.922010] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [299.922792] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [299.923590] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [299.924383] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [299.925192] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [299.925985] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [299.926758] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [299.927558] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [299.928365] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [299.929161] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [299.929964] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [299.930736] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [299.931545] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [299.932344] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [299.933147] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [299.933971] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [299.934758] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [299.935562] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [299.936364] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset

<7> [299.937107] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:59:pipe A] releasing DPLL 0

<7> [299.937980] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [299.938889] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [299.939759] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [299.940593] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [299.941389] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [299.942195] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [299.942999] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [modeset]

<7> [299.943778] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no

<7> [299.944595] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no

<7> [299.945394] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no

<7> [299.947140] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [300.154189] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 0

<7> [300.158451] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [300.172918] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power off

<7> [300.173365] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [300.174157] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [300.174637] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - short

<7> [300.176977] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [300.227051] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [300.228532] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long

<7> [300.228931] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [300.229776] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [300.231246] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:110:DDI A/PHY A]

<7> [300.232033] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:59:pipe A]

<7> [300.233169] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A]

<7> [300.237430] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [300.239635] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [300.244539] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A]

<7> [300.246737] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B]

<7> [300.248614] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A]

<7> [300.250607] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B]

<7> [300.252713] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C]

<7> [300.254772] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C]

<7> [300.258880] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A]

<7> [300.260967] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B]

<7> [300.262998] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C]

<7> [300.264973] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1]

<7> [300.268698] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A]

<7> [300.352151] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [300.407644] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:111:eDP-1] removing connector from sysfs

<7> [300.441729] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:119:DP-1] removing connector from sysfs

<7> [300.448756] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:128:HDMI-A-1] removing connector from sysfs

<7> [300.466670] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:134:DP-2] removing connector from sysfs

<7> [300.473162] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:140:HDMI-A-2] removing connector from sysfs

<7> [300.499347] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (232 ms remaining)

<7> [300.738304] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [300.780222] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<6> [301.434239] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS

<6> [301.435854] [IGT] i915_pm_rpm: exiting, ret=0

Results for igt@i915_pm_rpm@module-reload